Search Results

Search found 22701 results on 909 pages for 'missing features'.

Page 692/909 | < Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >

• Over gigabit connection, Teracopy does 31MB/s, but Windows 8 does it at ~109MB per second?

  - by Gaurang

  I got my brain-melting first taste of Gigabit networking today, between my 2011 MacMini and Windows 8 Pro desktop connected via Cat.5e to Linksys WRT320N(sporting dd-WRT). After making sure that the line speed on both systems showed 1Gbps, I proceeded to copying a 2.4GB MP4 from the Mini to the Win 8 desktop (SMB sharing). Although satisfied with the 30-34 MB/s that Teracopy was showing (that was a proper step-up for me from 10 MB/s), I still was curious about this massive difference in the advertised and real-world speed. 2 hours of Google had me believing that there were other factors that resulted in less speed, SMB being one. So just for the sake of doing it, I iPerf'd both the systems and guess what that showed - around 875mbps on both systems! I then stumbled upon this little piece of info after which I turned off Teracopy and copied the same file through Windows 8's regular copier. 109 MB/s. Molten brains :) What exactly is causing this? And can I enable such speeds via Teracopy? I really dig the extra features that Teracopy has, will surely miss them now :D

  Read the article

• Installing 64-bit Ubuntu Server 12.04 LTS, on a VM with VMWare Player, on a 64-bit Windows 7 PC

  - by WannaBeAGeek

  I'm trying to create a VM, using VMWare Player, with an ISO image of Ubuntu Server 12.04 (LTS). The machine I'm doing the installation on has an Intel(R) Core(TM) i5 CPU, and runs 64-bit Windows 7 I managed to create the VM (gave username, password, configured network etc), but I can't install Ubuntu Server. First I get this alert : Binary translation is incompatible with long mode on this platform. Disabling long mode. Without long mode support, the virtual machine will not be able to run 64-bit code. For more details see http://vmware.com/info?id=152. When I click OK, I get another alert : This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host supports Intel VT-x, but Intel VT-x is disabled. Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. (1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.' (2) Power-cycle the host if either of these BIOS/firmware settings have been changed. (3) Power-cycle the host if you have not done so since installing VMware Player. (4) Update the host's BIOS/firmware to the latest version. For more detailed information, see http://vmware.com/info?id=152. Then, when I click OK, my VM exists, and I get back to the VMWare Player home screen. I don't know much about hardware and virtualisation, so there might be some necessary info I'm not giving. Please don't hesitate to let me know what is missing in my post, for finding solutions. Thanks :)

  Read the article

• Apache: How to enable Directory Index browsing at the Doc Root level?

  - by Brian Lacy

  I have several web development projects running on Fedora 13. I generally setup Apache to serve my larger projects as Virtual Hosts, but I've got several small projects cycling through that I don't really care to setup a VirtualHost for each one. Instead I'd like them all under a subdirectory of the main VirtualHost entry. I just want Apache to serve me the directory index when I browse to the host name. For example, the hostname projects.mydomain.com refers to /var/www/projects, and that directory contains only subdirectories (no index file). Unfortunately when I browse to the host directly I get: Forbidden You don't have permission to access / on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. But my virtual host entry in my apache config looks like this: <VirtualHost *> ServerName projects.mydomain.com DocumentRoot /var/www/projects <Directory "/var/www/projects"> Options +FollowSymlinks +Indexes AllowOverride all </Directory> </VirtualHost> What am I missing here?

  Read the article

• Control Panel as menu includes a blank item

  - by Matthew Ferreira

  When viewed as a menu attached to the Start Menu in Windows 7 Ultimate x64, the Control Panel contains a blank item. It looks like this: This item cannot be deleted or removed. I also cannot create a shortcut to it. No error message is displayed, instead simply nothing happens. I've tried using Shell Object Editor (using Run as Administrator) to find out if there is an errant entry on the Control Panel, but many entries (almost two dozen) are blank. There are several valid entries as well. I've looked through the registry and through C:\Windows, \system32, and \SysWOW64 but have had no success. I looked at this question, but I am not using Windows XP and thus have no option to use Tweak UI's Rebuild Icons function. Please note that this is no empty entry in the Control Panel when opened normally, only when attached to the Start Menu as a menu. I have compared the list of entries on the attached menu to the normal Control Panel and other than the blank entry, they are exactly the same. Nothing is missing from one or the other. I've also compared the menu and the normal view to reference images and lists of Control Panel items and have found no irregularities. Is anyone familiar with this problem or know of a solution? I've performed virus and malware scans and found nothing. I've used CCleaner with no change. Nothing with Shell Object Editor. Nothing with Registry Editor. Certainly someone here knows how to fix this. My only guess is the many blank entries visible in Shell Object Editor, but I am reluctant to delete that many items without further analysis and guidance. I appreciate your time and consideration.

  Read the article

• Problem uninstalling and installing Java on new pc running Windows 7 64 bit os

  - by Brian Gerrin

  I have a new Dell Studio XPS running Windows 7 64 bit os. I am attending online classes which require IE 8 and Java version 6 build 20. The pc came with IE 8 32 bit and Java 6 build 21 already installed. I tried to uninstall Java using add and remove programs but after about 45 minutes of "Preparing to remove application" I got an error refering to a missing dll file and the uninstall failed. I used a third party program to remove Java and downloaded Java 6 build 20. My problem is when I try to install it I get the box telling me "Installing program ... this may take a few minutes" however after 30 to 45 minutes nothing has happend and there is no indication in the progress bar that anything is happening then all of a sudden the program bar is full and the program is supposedly installed. When I try to run it however it doesn't work. Someone help please! I can't get access to my classwork with out this! Thanks

  Read the article

• Windows XP / Outlook 2003 error messages

  - by AboutDev

  Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

  Read the article

• Apache2 doesn't serve PHP-scripts correctly

  - by cmbrnt

  I've run into a problem with my Apache 2.2.16 configuration, running on Debian Squeeze. The problem is that it stopped serving PHP5-scripts completely. When I try to access the sites with Google Chrome, it instead downloads a file called "download", which contains the contents of the script. This is of course not a good thing. It does serve common html-files perfectly... I've been at this for quite a while now, and after all the googling and troubleshooting, I thought it would be a good time to ask you guys. Here's what I've got: The php5 and libapache2-mod-php5 packages are installed /etc/apache2/mods-available contains both php5.load and php5.conf, and these are symlinked from the mods-enabled directory The /etc/php5/ directory is left untouched since the installation. Here's the contents of /etc/apache2/mods-available/php.load: LoadModule php5_module /usr/lib/apache2/modules/libphp5.so And /etc/apache2/mods-available/php.conf: <IfModule mod_php5.c> <FilesMatch "\.ph(p3?|tml)$"> SetHandler application/x-httpd-php </FilesMatch> <FilesMatch "\.phps$"> SetHandler application/x-httpd-php-source </FilesMatch> <IfModule mod_userdir.c> <Directory /home/*/public_html> php_admin_value engine Off </Directory> </IfModule> </IfModule> What am I missing? This is a server with modified virtual hosts and the like, so I might have changed some settings which causes this problem, but simply purging and reinstalling is not an option so far, since the configuration is quite extensive. Any help would be great. Thanks.

  Read the article

• Enable SSL with Jetty 8

  - by Jerec TheSith

  I received certificates from GoDaddy an I'm trying to enable SSL with Jetty but receive an error 107 SSL protocol error when connecting to https://server.com:8443 I generated the keystore using these commands : keytool -keystore keystore -import -alias gd_bundle -trustcacerts -file gd_bundle.crt keytool -keystore keystore -import -alias server.com -trustcacerts -file server.com.crt and placed it in /opt/jetty/etc/ And used the following configuration in jetty.xml : <Call name="addConnector"> <Arg> <New class="org.eclipse.jetty.server.ssl.SslSelectChannelConnector"> <Arg> <New class="org.eclipse.jetty.http.ssl.SslContextFactory"> <Set name="keyStore"><SystemProperty name="jetty.home" default="."/>/etc/keystore</Set> <Set name="keyStorePassword">**password1**</Set> <Set name="keyManagerPassword">**password1**</Set> <Set name="trustStore"><SystemProperty name="jetty.home" default="."/>/etc/keystore</Set> <Set name="trustStorePassword">**password1**</Set> </New> </Arg> <Set name="port">8443</Set> <Set name="maxIdleTime">30000</Set> <Set name="Acceptors">2</Set> <Set name="statsOn">false</Set> <Set name="lowResourcesConnections">20000</Set> <Set name="lowResourcesMaxIdleTime">5000</Set> </New> </Arg> </Call> Am I missing something in jetty's configuration ?

  Read the article

• Want to install GDB on Fedora 7 machine..

  - by RBA

  Hi, I want to install GDB GNU debugger for debugging C Programs, onto my fedora machine.. I installed the gzip file from gnu website, but it gives error during MAKE command.. I am doing all the steps correctly which reading from the readme file, and tutorial on internet. Please guide. Also i am trying to do from yum install gdb command and sudo apt-get install gdb, yum is not found in my system, i installed it, but now it is giving some unusual error, some file missing.. So no success with this.. sudo apt-get is working, but it is also giving some following errorss... [oracle@localhost Programs]$ sudo apt-get install gdb Password: Sorry, try again. Password: Sorry, try again. Password: oracle is not in the sudoers file. This incident will be reported. [oracle@localhost Programs]$ sudo apt-get install gdb I am in real nead of this gdb tool.. how to go about it.. Please share your experiences over this.. Thankx..

  Read the article

• What is the difference between a PDU and a power strip (both 120V, 15A)?

  - by rob

  I just chatted with an APC rep about upgrading the UPSes at our office. She recommended a single higher-capacity 6-outlet Smart-UPS to replace the four Back-UPS units we currently have. When I asked how she recommended plugging in all the current devices, she recommended using a APC's AP9567 PDU, but said not to use a power strip. At first she said I had to use an APC brand PDU, but after I inquired about using a Tripp-Lite PDU, she said any brand PDU would be fine. The APC PDU previously referenced looks like a standard 120V power strip with overload protection but no surge protection. Other than overload protection (which seems redundant if plugging into the UPS), is there something else I'm missing, or should any power strip (without surge protection) be fine? Edit: I didn't mention it earlier, but we don't have a proper rack--though I did still plan to mount the PDU or power strip to something. I guess I'm wondering if there's any special reason I should pay as much as $180 for the low-end APC PDU (which just looks like a power strip to me) vs. $20-$30 for a workbench power strip.

  Read the article

• Exchange 2003: recover mailbox when migrated to 2007

  - by lyngsie

  We have migrated almost all of our mailboxes from Exchange 2003 to 2007 so both are still up and co-existing in our domain. One mailbox is missing some mails, and I tried to recover from an Exchange 2003 backup using ExMerge as usual, but it throws an error: Error opening message store (MSEMS). Verify that the Microsoft Exchange Information Store service is running and that you have the correct permissions to log on. (0x8004011d) This should be normal when a mailbox has been migrated to 2007 and you try to recover a 2003 backup as stated here: http://www.petri.co.il/restoring-exchange-2003-mailboxes-exchange-2007-exmerge.htm We then tried the solution given in the article (copying the value "homemdb" for the user and pasting this in "msExchOrigMDB" for the Recovery Storage Group object in adsiedit). The error unfortuntely persists. So my question is, how can I extract a .pst from a mailbox in the recovery storage group when both Exchange 2003 and 2007 are running? I assume this is why the solution in the article didn't work. If no solution is possible using regular tools (exmerge, eseutil, etc.) which third-party tool should we choose - preferably the cheapest as we only need this one mailbox recovered.

  Read the article

• Windows Media Center showing Jerky Video on PC

  - by Kris Erickson

  I had to repave my Windows 7 x64 box last week due to a hard drive crash, and for a while everything was running perfectly but now all videos in Windows Media Center are jerky (the sound is fine, they just seem to skip a ton of frames all the time). This is on the local machine, but the same thing happens when I try to stream to my Xbox. The videos all show fine in VLC and Windows Media Player (however exhibit the same problem in Quicktime). I guess I must have installed something recently (in the process of getting all the apps I usually have running on my PC) that caused this but for the life of me I can't figure it out. I have updated to the latest video driver (and then rolled back to the standard Windows 7 driver), I have rolled back all the other drivers that I have installed (I believe). I have uninstalled all the codec packs (I also run TVersity, so I have the TVersity codec pack installed), and I uninstalled TVersity. Nothing seems to help. I have uninstalled windows media center, and reinstalled it from the Programs and Features. I have basically ran out of things to try to fix this, and am almost thinking about reinstalling Windows again. Any suggestions? Edit Specs on the PC (which I figured was unimportant since everything used to work perfectly): Intel Core 2 CPU 6600 @ 2.4 Ghz Nvidia GTS 8800 Built in realtek-audio soundcard 4GB Ram Codecs which are failing: All that I have tried, but at least Xvid, Mpgv (mpeg2 video from a camera), and Wmv (only kinds that I have ready access to).

  Read the article

• Booting Ubuntu as VM with KVM on Ubuntu 12.04

  - by CrazycodeMonkey

  I am trying to boot my very first VM using KVM. I have Ubuntu 12.04 installed, i made sure the BIOS had the right virtualization flag enabled for intel processor by running kvm-ok. I have researched this on google and all the instructions that i have found so far are outdated. for e.g. most instructions talk about booting a virtual machine with the following commands qemu-img create -f qcow2 foo.img 100G --- create a virtual disk for your VM kvm --name foo -m 1024 -hda foo.img -cdrom whatever.iso -boot d -- This runs kvm. This command line is incomplete. First you need to be root to run this. Second- it is missing option for the video device. When you run this command you get the following error "Could not initialize SDL(No available video device) - exiting" Googled this error and looked it up on stackover flow http://stackoverflow.com/questions/4841908/sdl-init-failure-reason-is-no-available-video-device The answer provided here does not work on Ubuntu 12.04 Googled this problem further and found out that i need to specify a video device so I finally ran the following command sudo kvm --name mymachine -m 8096 -hda myimage.img --cdrom ubuntu.iso -boot d -vga cirruss -k en-us -vmc :0 This was after I had created the myimage.img image on the drive. Now this command does not give me an error but it just hangs. Does anyone have clear instructions on how to run a VM using KVM on Ubuntu?

  Read the article

• Adding 2nd DC to the domain from a different subnet over VPN.

  - by EagerToLearn

  I'm in the process of adding a second DC to our domain and just want to make sure I have all the steps right before proceeding. Info: DC1 is 2008 R2 Standard. DC2 is 2008 R2 Standard. Network1 is 192.168.39.x/24 Network2 is 10.0.0.x/24 VPN is Sonicwall. The 2 DC's will be at two different sites, but the networks are connected by hardware VPN. (Sonicwall). The main DC server will be on the 192.168.39.0/24 network. The 2nd DC will be on 10.0.0.0/24. Here are the steps I plan to take; please let me know if I'm missing anything. Part 1: AD Sites and Services on DC1, create a new site and subnet for DC2. (Or should I create a new one for both?) (Can I use the default IPSiteLink and not change anything in there other than refresh timer?) Part 2: Point the DNS of DC2 to DC1. Run /forestprep and /domainprep (on both, or just DC1?). Dcpromo and select "Additional Domain Controller for Existing Domain". Then continue with normal steps with default locations for databases. EDIT: Didn't realize this was like reddit and required two skipped lines to skip one :P EDIT 2: When DCPromo-ing DC2, do I need to have "Append primary and connection specific DNS" and "Append parent suffixes of the primary DNS suffix" checked?

  Read the article

• Forcing programs to be installed to another drive

  - by zyboxenterprises

  I have an SSD as my main Windows drive, with a 640GB 2.5" HDD, partitioned to store programs and user settings, and also to act as backup (it's the only thing I had lying around at the time of building my PC). The task was to make the PC as fast as possible, while having an increased storage capacity available to store normal user data, and to assist in my small data recovery business. The problem is that whenever I install a program, it installs to C:\Program Files [(x86 for the 32 bit programs]\, although I have changed the environment variables. This wouldn't normally be an issue, however every installation program points its shortcut to my 640GB HDD. The root layout of both drives: To clarify: Program files get installed to C:\ Program shortcuts are always pointed to Z:\, my 640GB HDD Modifying the relevant environment variables doesn't do anything, I looked at this, but however it only talks about modifying the registry and environment variables, which I have already done so. I install to the Z:\ drive if the installation program lets me change the installation path, but however the installation programs sometimes don't let me change this. Is there a way that I can force every program to install to the relevant location on Z:\? Perhaps I'm missing something here? Edit: Found this program; would it be appropriate to use in my case? I would be able to move the entire Program Files (and its x86 version) to Z:\, without impacting on the performance.

  Read the article

• Processes spawned by taskset not respecting environment variables

  - by jonesy16

  I've run into an issue where an intel compiler generated program that I'm running with taskset has been putting its temporary files into the working directory instead of /tmp (defined by environment variable TMPDIR). If run by itself, it works correctly. If run with taskset (e.g. taskset -c 0 <program> Then it seems to completely ignore the TMPDIR environment variable. I then verified this by writing a quick bash script as follows: contents of test.sh: #!/bin/bash echo $TMPDIR When run by itself: $ export TMPDIR=/tmp $ test.sh /tmp When run through taskset: $ export TMPDIR=/tmp $ taskset -c 1 test.sh "" Another test. If I export the TMPDIR variable inside of my script and then use taskset to spawn a new process, it doesn't know about that variable: #!/bin/bash export TMPDIR=/tmp taskset -c 1 sh -c export When run, the list of exported variables does not include TMPDIR. It works correctly with any other exported environment variable. If i diff the output of: export and taskset -c 1 bash -c export Then I see that there are 4 changes. The taskset spawned export doesn't have LD_LIBRARY_PATH, NLSPATH (intel compiler variable), SHLVL is 3 instead of 1, and TMPDIR is missing. Can anyone tell me why?

  Read the article

• How to go about rotating logs which are arbitrary named and placed in deeply nested directories?

  - by Roman Grazhdan

  I have a couple of hosts which are basically a playground for developers. On these hosts, each of them has a directory under /tmp where he is free to do all he wants - store files, write logs etc. Of course, the logs are to be rotated, or else the disc will be 100% full in a week. The files can be plenty, but I've dealt with it with paths like /tmp/[a-e]*/* and so on and lived happily for a while, but as they try new cool stuff on the machine logrotate rules grow ugly and unmanageable, and it's getting more difficult to understand which files hit the glob. Also, logrotate would segfault if asked to rotate a socket. I don't feel like trying to enforce some naming policies in that environment, I think it's going to take quite a lot of time and get people annoyed and still would fail at some point. And I still need to manage the logs, not just rm the dirs at night. So is it a good idea in circumstances like these to write a script which would handle these temporary files? I prefer sticking with standard utilities whenever possible, but here I think logrotate is getting less and less manageable. And probably someone heard of some logrotate alternatives which would work well in such an environment? I don't need emailing logs or some other advanced features, so theoretically some well commented find | xargs would do. P.S. I do have a log aggregator but this stuff is not going to touch my little cute logstash machine.

  Read the article

• Redeploy using Active Directory

  - by Noam Gal

  I am trying to use group policy to deploy our msi through AD. For some strange reason, when I overwrite the msi with a newer version, and then go to the policy, and click on "Redeploy Application", the application gets uninstalled on the users' machines, and all reg keys, binaries and shortcuts are gone from them. The "Add/Remove Programs" still contain the application entry. I have managed to create a minimal vdproj that does nothing but write its current Product Version to a registry key, and created two versions of it (1.0.0 and 1.1.0). I still face the same problems when using this msi in my AD environment. I did check that my Package Codes and Product Codes are different for both versions, and that the Upgrade Codes are identical. I also checked the RemovePreviousVersion to true. Checking with some other msi (firefox 3.0.0 and 3.6.3) I downloaded from a site specifically for AD deploy, it worked just as expected (first installing the 3.0.0, then I over-written the msi, and clicked on "Redeploy", and the users got 3.6.3 after the next log-off-log-on). What am I missing here?

  Read the article

• VMWare web UI intermittent access on CentOS

  - by PeteWilliams

  I've got a CentOS 5.2 server that I'm trying to get set up as a development environment. As part of this, I planned to install VMWare Server 2 and set up several virtual development servers. I've got as far as installing VMWare Server 2 but access to the remote control panel is only working intermittently. If I access it through Firefox at https://127.0.0.1:8333/ui/# it usually says either: "Connection intterupted: connection was reset before the page loaded" Or "Firefox can't establish a connection to the server at 127.0.0.1" But every now and then it lets me in and I'll manage a few clicks in the web UI before it kicks me out with the following error: "The server could not complete a request (HTTP 0 ). The server encountered an unexpected condition that prevented it from fulfilling the request. If this problem persists, please contact your system administrator." I've done all the updates available in CentOS except one OpenOffice one that is causing a conflict, and I re-ran wmware-config.pl after updating the kernel. Though I went with all the defaults as I don't really know what I'm doing! I've since rebooted and nothing changed. I've also tried accessing the control panel remotely from another machine in the network and the results are the same. Does anyone have any ideas what might be causing this and how I can resolve it? I'm afraid I'm a developer playing at sys-admin, so I may be missing something obvious! Many thanks Pete Update I have now reinstalled both the operating system and VMWare and I'm still getting the same issue. I wonder if it's a result of the settings I'm putting in on the config.pl script..?

  Read the article

• Inkscape: Copying an object, retaining transparency

  - by dpk

  I'm looking for a way to copy objects from one window to another without losing the surrounding transparency. I have two Inkscape windows. The setup is pretty simple. In the first window I draw a filled circle and a filled rectangle in it, with the circle set on top of the rectangle to show that the area around the circle is transparent (that is, you can see the rectangle "under" the circle, see screenshot 1, left). In the second window I just drew a filled rectangle (screenshot 1, right). When I copy the circle from window 1 to window 2 the transparency around the circle is lost (screenshot 2). I've verified that the backgrounds of the documents are 0% alpha/white. This is a rather contrived example but is readily reproducible. The real graphics I am working with have a bunch of objects all in a single group, but I have the same results. I feel like I'm missing something. The circle no longer behaves like a circle at its destination. Instead, it acts kind of like a bitmap. I'm definitely not using the bitmap copy feature.

  Read the article

• Http header 304 and caching?

  - by Royi Namir

  Our company uses these settings( don't ask me why) - for every request they want a new request from server. this is an intranet system which uses only IE. They defined it in : We also have windows authentication NTLM in the iis7. I have 2 questions please. Question #1) when the browser make a request ( css ) : (leave the 401 response for now - this is how ntlm works) He is requesting it with if-modified-since header. why is he adding this header ? How can I configure it ? why doesn't he use the settings from IE and try to download it each time - as I showed in the first picture ? Question #2) The response ( after ntlm negotiation) for that was : Response with Not-modified which is 304 header. and I assume its because we sent the request with the if-modified-since header. But there is a problem. He is actually tells me to download from my cache. But I told him explicitly in the IE settings - not to load from cache. Wham am I missing here ? Thanks a lot.

  Read the article

• FastCGI on lighttpd no data received

  - by Michael Sh

  I have a simple FastCGI script: public static void main (String args[]) { int count = 0; while(new FCGIInterface().FCGIaccept()>= 0) { count ++; System.out.println("Content-type: text/html\n\n"); System.out.println("<html>"); System.out.println( "<head><TITLE>FastCGI-Hello Java stdio</TITLE></head>"); System.out.println("<body>"); System.out.println("<H3>FastCGI Hello Java stdio</H3>"); System.out.println("request number " + count + " running on host " + System.getProperty("SERVER_NAME")); System.out.println("</body>"); System.out.println("</html>"); } } Set up with lighttpd as: server.modules += ( "mod_fastcgi" ) fastcgi.debug = 1 fastcgi.server = ( "/cgi" => ( "fastcgi" => ("port" => 8888, "host" => "127.0.0.1", "bin-path" => "/var/www/tiny.fcgi", "min-procs" => 1, "max-procs" => 1, "check-local" => "disable" )) ) In the log: 2012-11-24 04:35:04: (mod_fastcgi.c.1367) --- fastcgi spawning local proc: /var/www/tiny.fcgi port: 54321 socket max-procs: 1 2012-11-24 04:35:04: (mod_fastcgi.c.1391) --- fastcgi spawning port: 54321 socket current: 0 / 1 2012-11-24 04:35:39: (mod_fastcgi.c.3061) got proc: pid: 0 socket: tcp:127.0.0.1:54321 load: 1 The problem is that there is no data being sent from the server to browser. Am I missing something here?

  Read the article

• Removing extended partition without deleting logical in it

  - by HisDudeness

  I'm running a Linux-based laptop, and in order to multi-boot several distros in it, I created an extended partition which contains a bunch of logical ones with GParted. Now, after quite a long time with this setup, I've changed my mind because of the consequent lack of storing space for my data partition. Now I want to keep one distro alone like it's normal, and eventually have some other operating systems stored in external supports to plug in and use if I want. Obviously, also this partition I want to keep (and to enlarge a little too) is just a logical inside the extended I want to keep. For what concerns the number I'm ok, meaning I currently have this big distro dedicated extended, the swap and the data partitions, so there's space for another primary before I delete the extended, but I don't know how to delete it without touching the logical in it, I don't want to reinstall the system losing all changes and settings, and I don't want to keep an extended partition for a logical alone. How can I do? Do I have to create a new primary, copy the logical content in it and then delete everything? Will the system boot and maintain exactly all the features it has now? Or is there a way to convert an extended into a primary once it contains just one logical? Or can I directly move a logical out of an extended turning it into a primary? Or, again, am I screwed?

  Read the article

• NFS: Server says "authenticated mount request", but client sees "access denied"

  - by zigdon

  I have two machine, an NFS server (RHEL) and a client (Debian). The server has NFS set up, exporting a particular directory: server:~$ sudo /usr/sbin/rpcinfo -p localhost program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 910 status 100024 1 tcp 913 status 100021 1 udp 53391 nlockmgr 100021 3 udp 53391 nlockmgr 100021 4 udp 53391 nlockmgr 100021 1 tcp 32774 nlockmgr 100021 3 tcp 32774 nlockmgr 100021 4 tcp 32774 nlockmgr 100007 2 udp 830 ypbind 100007 1 udp 830 ypbind 100007 2 tcp 833 ypbind 100007 1 tcp 833 ypbind 100011 1 udp 999 rquotad 100011 2 udp 999 rquotad 100011 1 tcp 1002 rquotad 100011 2 tcp 1002 rquotad 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100005 1 udp 1013 mountd 100005 1 tcp 1016 mountd 100005 2 udp 1013 mountd 100005 2 tcp 1016 mountd 100005 3 udp 1013 mountd 100005 3 tcp 1016 mountd server$ cat /etc/exports /dir *.my.domain.com(ro) client$ grep dir /etc/fstab server.my.domain.com:/dir /dir nfs tcp,soft,bg,noauto,ro 0 0 All seems well, but when I try to mount, I see the following: client$ sudo mount /dir mount.nfs: access denied by server while mounting server.my.domain.com:/dir And on the server I see: server$ tail /var/log/messages Mar 15 13:46:23 server mountd[413]: authenticated mount request from client.my.domain.com:723 for /dir (/dir) What am I missing here? How should I be debugging this?

  Read the article

• While using an ntfs smb share for mac users, do symbolic links and extended attributes work?

  - by scape

  We have a majority of mac users but we'd rather support their file sharing using a Windows server with an ntfs drive, or at least a Linux server with ext3. We've had trouble, much trouble, utilizing the OS X server software and after the years are now looking to abandon it. What's mostly holding us back is the fact that the mac users very often utilize symbolic links and other special features that exist for an HFS+ partition. The shared locations are mostly primary storage and not just used as an archive storage location. While there is an option to create symbolic links under ntfs, I'm curious if there is anything I need to look out for if I were to move the files over to a new partition that's hosted from a Windows server from the HFS+ partition; in addition, how well creating a symbolic link from a mac might work. I am also worried about windows backup software and if it will ruin these special sym links, and how placing permissions on sub-folders will work. Alternatively I could remotely backup the files using a mac and Bru, nonetheless I still want to get away from mac server for hosting the shares.

  Read the article

< Previous Page | 688 689 690 691 692 693 694 695 696 697 698 699  | Next Page >