Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 7/62 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • How to stop fan running always on Asus P8P67LE motherboard with ATI Radeon HD6900

    - by Chris Good
    I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

    Read the article

  • GA-P31-S3G motherboard usb flash drive boot

    - by user1048125
    I currently trying to understand if my motherboard supports booting from USB flash drive or not... In motherboard manual it written: "First/Second/Third Boot DeviceSpecifies the boot order from the available devices. Use the up or down arrow key to select adevice and press to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP,USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Disabled" Is there way to boot from 8GB USB flash drive?

    Read the article

  • Integrated Graphics went kaput, can I switch to dedicated graphics if I can't get into the BIOS

    - by Om Nom Nom
    I have an 8 year old computer (Pentium 4 1.6 GHz, 256 MB DDR RAM) which is not turning on (it beeps for 10 seconds and then goes off). Nothing appears on the screen, so I can't get into the BIOS. A computer repair person listened to the beeping pattern and told me that its because of the integrated graphics on the motherboard is defective. It's an ASUS P4S333-VM motherboard and the graphics solution is SiS 650. He tried putting in a PCI graphics card expecting that the computer will use that instead and ignore the integrated graphics, but apparently older computers don't switch automatically to the dedicated graphics card; it needs to be changed from the BIOS. But, I can't get inside the BIOS settings as I already said. I am told that the only option now is to replace the motherboard (which is not feasible since it's very old now). So, is there any way to make the computer use the PCI graphics card? IIRC, the motherboard also has an AGP port, but I think that it will also need to be selected from the BIOS?

    Read the article

  • Short, intermittent USB port timeouts

    - by jacobsee
    I have a data acquisition application controlled by a Windows PC. I am using an Intel Desktop Board DH67CL motherboard. This has 6 USB2 ports along with 2 of the new blue USB3 ports. The DAQ instrument connects via USB to the computer. Roughly once every day or two there is a short communication glitch with the USB that causes the instrument to disconnect briefly and then reconnect. This is logged so I know whenever it happens. Occasionally it will cause the data acquisition to stop. I've verified that the glitches will go away if I use the USB3 ports, or if I use a PCI add-on card with USB ports. So it seems that there is something going on with these built-in USB2 ports on this motherboard. I haven't yet had a chance to test with other motherboards. My question: what could be causing these glitches and how to get rid of them for this board, or is there a better motherboard to use? We have standardized on the DH67CL because it's inexpensive, has 3 PCI slots that we need, and is readily available. We don't need the power of higher-end server boards but reliability is important. Thanks. Update: This problem has been reproduced many times on different hardware, though we always use the same model of motherboard (DH67CL) and power supply (Antec EA-430D). I don't think the power requirements are very high but will check on that.

    Read the article

  • Hard Drive problem: is it the SATA controller or the HDD itself?

    - by Drooling_Sheep
    I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

    Read the article

  • System fans connected to a Gigabyte Z77-D3H motherboard do not increase in speed

    - by Andrew
    The motherboard (Gigabyte Z77-D3H) controls my 3-pin CPU fan just fine. My system fans are a 3-pin fan (plugged into SYS_FAN1), and a 4-pin fan plugged into SYS_FAN3. All 3 of the system fan headers are 4-pin, but the user manual states that SYS_FAN1 is really a 3-pin header (that it can control the speed of a 3-pin fan) and the 4th pin is just a reserve. All my fans have a max RPM of 2000. Normally, all the fans run around 1000 RPMs when I'm not doing anything intensive. This proves that the motherboard can set the speed. However,when I run Folding@Home and my temperatures increase (around 70C) only the CPU fan increases to around 2000 RPMs. The system fans stay around 1000 RPMs. Through the BIOS I am able to disable the system fan control and the system fans then run at max RPMs (meaning the motherboard was doing something). I've updated the BIOS to the latest version and tried out Speedfan, but neither helped my situation. What I'd like is for the system fans to ramp up their RPMs as needed. Any thoughts? Tl;dr: My system (case) fans, but not my CPU fan, are always stuck around 1000 RPMs out of 2000 no matter the temperature.

    Read the article

  • K8NDRE motherboard in server fails to complete BIOS load with error 0078

    - by John
    K8NDRE motherboard with 4 sata drives, was running fine. Drives had raid-0 and raid-1 partitions, using mdadm. The onboard raid is disabled. Upon reformatting the drives, setting a new partition structure and new raid partitions, the bios fails to finish loading, with 0078 in the bottom right corner. Tried using completely new set of drives, and bios worked fine. Able to boot from a usb, format the drives, partition them, start raid, and then installed os. Reboot and received the same error from the bios, 0078. Works fine if I unplug the sata drives. Any thoughts? Physical inspection reveals no damage cables, connectors, or capacitors. Server was running happily for over a year, and this is the first problem it has had. Per Michael Hampton's answer: The drives, unjumpered and supporting sata III worked fine originally, and worked fine for formatting and having new partitions and raid installed on them. I did try jumpering one, with no change. If I put a brand new unformatted drive in, the motherboard recognizes it and I can proceed with formatting and installing. When I reboot, I get the 0078. I have 4 sata cables-the board supports 4 drives, so I tried each and no change. I am close to calling the motherboard done.

    Read the article

  • VM load and ping problems after replacing server motherboard

    - by Andre
    Recently, we had to replace the motherboard of one of our servers. The procedure was done by IBM as it had guarantee. The server runs ESXi 5.1, with several virtual machines, including our main mail server (Domino) and a file server. After the replacing the motherboard and staring the VMs, ESXi asked us if we had moved it or copied (different motherboard is like a different computer). We clicked the latter. We started each machine and after some basic reconfiguration, all of them were up. However, we have been having problems with the mail server, it has been acting really slow at times (this could be when it syncs with the secondary mail server) and we have been checking with Centreon (a Nagios frontend) that its CPU load has been a bit high at times and ping response too. There was a moment this morning in which I tried connecting via SSH console and it was really slow to show login and basic commands like ifconfig and top. This particular mail server is a CentOS 4.4.7 64-bit. The little configuring we had to do after restarting it was to configure the network connection as it was resolving through DHCP. Our mail software is Lotus Notes server 9. Do you know of any way in which this replacement may be causing these difficulties, and how to fix it? Thanks.

    Read the article

  • Computer can't boot

    - by zETO
    I have a 1 year old PC and the last weeks, when I press the ON button the PC doesn't power on ( Like I didn't press the ON button ). I have to plug and unplug a few times the power cord in order to make it work. At the start this happened once in 10 boots. Now it happens much more frequently to the point that when I press the power on button it never even opens if I don't do the cord switch thingy. Very rarely also, the PC shut downs for no reason and no warning, even when idle. The important fact to note here is, the green light on the motherboard is always on, even when the PC doesn't power on. What should I do? Is it a Power Supply failure or a motherboard? My power supply is a high end corsair model, AX850 and my motherboard a high end ASUS.

    Read the article

  • fedora 11 server won't boot from SATA disk, won't boot from CD, BIOS configuration problems

    - by Tom
    Hi all, Yesterday our fc11 file/print server didn't boot, and had stopped on the BIOS page with a configuration problem. (with a distinct lack of foresight) I reset the BIOS settings to default without recording the message and booted the server. The server ran until it was to be booted this morning, and it was failing to mount the root partition from the SATA disk. It also failed to boot from a known good diagnostics CD. After a few more tries, it now fails part way through the Phoenix - AwardBIOS screen where it is listing the SATA/IDE devices, and it is showing garbage for the identity of one of the disks, which should actually be "none" It looks like the motherboard has gone kaput. The motherboard is an EVGA NF790i, are there any diagnostic tools that I can use to determine this? (as I would prefer to not send the motherboard back, only to discover that it is the RAM or the CPU) ps I can't get it to boot from the memTest disk, so I can't run that diagnostic. Thanks!

    Read the article

  • Mini-ITX board for AM3 Athlon X4 600e processor.

    - by Kamil Zadora
    Hello, I am planning to build a PC to control a robotic platform that I am building (about 50% complete). I need more power than ATOM platform could bring, as the robot will need to do on the fly image processing to work as intended. I was considering using Athlon X4 600e as it is rated 45W Maximum output. Probably underclocked it would go lower than 30-35W. I do not I'am at very long battery life, but the 17Ah, 12V battery should keep it running for few hours. My problem is: motherboard. I am space limited so I am looking for a nice mini-itx AM3 motherboard to match the processor. It is hard to find many tests about power usage of the motherboards itself (for example, when using the same processor on different motherboards, test are usualy done in the opposite matter). Could you provide any motherboard examples or suggest what chipset to look for? Thank you in advance.

    Read the article

  • Is it possible (and safe/reliable/non-damaging) to use a 20-pin ATX PSU with a 24-pin ATX motherboar

    - by Legooolas
    I have a reasonably-decent old 20-pin PSU which I want to use on a newer 24-pin ATX motherboard. I see that the ATX page on wikipedia mentions that 24-pin ATX is backward-compatible, and I can find 20-to-24 pin adapters to buy for a couple of dollars/pounds at lots of places, but I can't find any mention of restrictions on the use of these. Will this work on any motherboard, or is it a per-motherboard compatibility question? Are there any other restrictions like the level of power available (and hence the additional 4 pins with +12, +5 and +3.3V lines which are already on other pins)?

    Read the article

  • Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

    - by Breadtruck
    So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

    Read the article

  • Are there pitfalls to using incompatible RAM (frequencies) in motherboards?

    - by osij2is
    I'd like to use 2 x 4GB DDR3 1600 dimms in a motherboard capable of only DDR3 1066. The DDR3 1600 is on sale and the cost is identical to 1066 dimms. It'd be nice to have these faster sticks around should i upgrade the motherboard. I assume the RAM can under clock itself or be changed in the BIOS. While obviously it's less than ideal situation, I don't know if there are other unintended consequences in terms of stability, performance and longevity of the board and said RAM. Am I doing any damage to the memory controller or RAM? I've always bought RAM at the max speed specified for the motherboard and I've never gone over so I'm not sure if there any caveats to this at all. Edit: I intend to use the RAM in pairs. I know that mixing RAM speeds is just a bad idea.

    Read the article

  • What is the fastest CPU my laptop can support?

    - by Dave
    I have a Dell Latitude D830 laptop and would like to speed up compile times on it. I have confirmed that it is, indeed, the processor time that is the bottleneck. How can I tell what processors are compatible with the motherboard to pick the best available? I run dual boot Ubuntu Maverick and Windows 7. lshw tells me that my motherboard is OHN338 from Dell, Inc. If anyone has a generic solution, i.e. "For motherboard X, here is how you find out what processors are supported," that would be make this question much more useful to future visitors. But if you also know of a way to find out specific to my model, that would be great as well.

    Read the article

  • Understanding why a 450W power supply is destroying my ATX motherboards but not mATX

    - by T. Webster
    Maybe I'm missing something really obvious here, but after going through 3 new motherboards in trying to build my new machine, I'm finally certain that the 450W power supply I bought has been destroying them. It seems like it should be simple: just connect the connectors where they fit and switch the thing on. But today after hooking it to my ASUS Sabertooth 990FX TUF Series Motherboard and switching it on, I could see and smell the smoke coming out of the motherboard. What I don't get is why I can hook this same 450W power supply up to my mATX motherboard and not run into the same problem. What am I missing here? Where on the box or manual is this? (I have 8x2 GB RAM, AMD FX-4100 3.6GHz CPU, 1 512MB ATI graphics card, 1 WD 7200 RPM SATA hard drive. )

    Read the article

  • what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

    - by Michael Borgwardt
    When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

    Read the article

  • Computer refuses to POST

    - by TheX
    Computer refuses to POST. What it will do is the fan spins up, and the lights come on on the motherboard, but other then that it just sits there and laughs in my face! Here is what I have done... I have tried 2 different video cards, both known to work, 4 different sticks of RAM in all four ram slots, 2 processors (known to work), and 2 power supplies (known to work). The only constant is the motherboard... The Motherboard is a Asus m3a3-mvp deluxe. Anyone have any other ideas? Also, I have bread boarded it to make sure there where no shorts (taken everything out of the case and tried again).

    Read the article

  • No image from graphics card but image from onboard video

    - by ReAzem
    I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

    Read the article

  • Gigabyte Motherboard + Adaptec RAID = No Booting from any drives

    - by Farseeker
    I have a brand new PC, just out of the box. It has a Gigabyte GA-P55-USB3 motherboard. I also have an Adaptec ASR-2504 SAS RAID card with 2x 15k Seagate Barracuda SAS drives attached. After the motherboard init's its on-board RAID it then init's the Adaptec RAID. It detects all the RAID devices OK, but when it gets to Loading Operating System... (i.e. right before it should load the OS) it just sits there forever, doing nothing: If I force it to boot from the optical drive, you see it spin up for a few seconds then die down again. If I remove the Adaptec RAID card, everything works perfectly. As soon as it's plugged back in, it never gets past that stage. The RAID card should be perfectly fine (it was before), but I have raised a case with Adaptec anyway. Any suggestions on what I can try to get these two to play nicely together?

    Read the article

  • I bought a motherboard that supports DDR3 RAM

    - by CVertex
    I bought this ASUS Sabertooth X58 motherboard from http://msy.com.au/product.jsp?productId=7301 But I'm not sure what DDR3 RAM to buy. I haven't built a PC from scratch in about 3 years, and I'm wondering the following Do DDR3 ram chips need to be installed in three at a time? Or can I just install one or two now and install more later without any particular pattern? If I buy 2000MHz RAM from Corsair, will that work at 1866 MHz? (which is the highest frequency the motherboard supports) Is it just me or is 1866 RAM not around? Any help is greatly appreciated.

    Read the article

  • bad ram or bad motherboard

    - by user39508
    I have a computer which crashes after about 5-45 seconds of operation. It can run memtest86+, and it doesn't display any errors, but it doesn't prevent it from crashing within the time frame listed above. The heat sink appears to be installed correctly, and I don't think it is related to overheating. The motherboard is connected to the ram and a monitor, nothing else is installed. The processor is an atom 330, running memtest86+ 4.0. Any insight into if the ram is bad or if it is the motherboard/psu/cpu? Thanks!

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >