Search Results

Search found 1543 results on 62 pages for 'motherboard'.

Page 4/62 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • What motherboard for a Core i7 920 Processor?

    - by jasondavis
    I am wanting to build a really nice PC, price is not to important as I will buy pieces every week or whatever it takes until I get everything I need. I am not a gamer but I would like to watch video and have 3-4 monitors. I do a lot of programming and use a lot of big programs so I would like to go all out and get a lot of Memory, probably at least 12gb but possibly more even as I see many boards support up to 24gb now. Will be using Windows 7. I have decided to go with the Core i7 920 Processor BX80601920. Based on what I posted above, can you please recommend some good motherboards I should look at ? Also some good places to purchase them online. Thanks for any help, tips, etc.

    Read the article

  • Which type of motherboard i should by and why?

    - by metal gear solid
    If budged is not matter. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor? Is the size of motherboard and number of Slots only difference between all form factors? Is there any difference related to performance of motherboard? Is bigger in Size (ATX) motherboard always better?

    Read the article

  • Motherboard dual gfx power question

    - by user33931
    1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

    Read the article

  • Asus P8P67 Rev. 3.1 Motherboard issues powering on and saving settings

    - by Scott
    Edit: New Information Have some updated information from the old question below: So basically my issue right now is somewhat similar, but I've been able to rule out a couple of things. I don't think this has anything to do with light on the motherboard. No matter what lights are on/off on the motherboard when the computer is off, they don't affect this issue. The main power LED on the Mobo is always lit when the power supply is turned on, and that's what matters anyway. Even when the main power LED is on, the PC will NOT boot up the first time I hit the power switch. I have to go reset the power supply (make all lights turn off on the Mobo and back on), and THEN hit the power switch. Then everything boots up. Also, the BIOS settings are reset every time this happens. Asus Tech Support told me to try jumping the power with something metal to try and rule out that it's a problem with the connectors getting power, or if it's a problem with the case power switch pins - haven't done that yet though. Any ideas? This is a lot simpler than it was before when I thought it had to do with certain LED indicators for RAM, EPU, etc. Original Question So I built my new desktop just about 3 weeks ago. I've been having a few issues which I think are all related to my motherboard, an Asus P8P67 Revision 3.1, but I'm not 100% sure as this is really the first from-scratch build I've ever done. I've posted these questions on the Asus forums, Asus Tech Support, and the Corsair forums as well as I thought it might have something to do with my power supply at one point. None of these avenues have solved my issue until now completely, so I thought I'd come here to see what you guys think. Here's what's happening: My computer is off, and I go to power it on. I press the power switch on the case (Antec Nine Hundred), and nothing seems to happen. Upon further inspection, I see that what this actually does is simply turn on the EPU LED on my motherboard, but doesn't actually boot anything up. I then have to go and flip the main power switch on the power supply off and back on. What this does is turn off all lights on the Motherboard after a few seconds, and turn them all back on (including the EPU LED that was off before I hit the power switch the first time). Now, hitting the power switch works. The machine boots up fine, and starts going through the boot up process. As a side note: My Motherboard is set to "Force BIOS", and every single time I change this to do the opposite, the next time my computer boots up that change reverts itself. I think this may be due to the fact that I am doing the hard reset on the power supply each time, but I'm not sure. I had thought that the Motherboard would keep its BIOS settings unless you did something to the Mobo itself - so this may be a related issue, or something else completely. That's basically it. Once it's on, it's on. It works fine, recognizes all of my hardware, and runs great. All fans/lights in the case work great, and I'm getting standard readings. The next time I go to shut the computer down however, I can expect the same exact process getting it up and running, including being forced to go into BIOS and exit again before I can load Windows. Another side note: If I power on my computer using the power switch DIRECTLY after shutting it down, it powers right back on (I think this is because the EPU LED light doesn't have time to turn off). It looks as if as long as the EPU LED is lit up on the motherboard before I hit the power switch on the case, the thing will boot up fine (although this doesn't explain the "Force BIOS" issue, at least it's something). Any ideas? Thanks guys. P.S. - System Specs Asus P8P67 Rev. 3.1 Motherboard Intel Core i7 2600K Processor 16GB (4x4GB) G-Skill 1600 RAM NVIDIA EVGA GTX 570 Video Card Crucial 128GB SSD HD Corsair 850W Power Supply Seagate 2TB HDD

    Read the article

  • For Intel cpu , if chipset and motherboard are also from intel then it will give best performance. I

    - by metal gear solid
    I'm going to purchase Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) and for motherboard my local vendor suggesting me to purchase Intel DG41RQ MB motherboard and he is also saying if i'm purchasing Intel CPU then purchasing Intel's Own motherboard with intel chipset will give best performance. Is it true? To get good inbuilt graphic I'm thinking to purchase nvidia chipset based motherboard of any other company like Asus, Gigabyte, MSi etc. is it ok? Although i never play games on my PC but thinking Inbuilt Nvidia graphics will be better for running Photoshop and watching movies then Intel's inbuilt graphics. or it's ok to purchase Intel DG41RQ MB motherborad as suggested by local vendor. Intel's inbuilt graphics would be enough for Photoshop and Watching movies. If you know any other good motherboard for Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) then tell.

    Read the article

  • Which type of motherboard i should buy and why?

    - by metal gear solid
    If budged is not a problem. I just need best performance with less power consumption. I can purchase any cabinet , power supply and Motherboard. Is Power supply has any relation with Form factor? Is the size of motherboard and number of Slots only difference between all form factors? Is there any differences among form factors, related to performance of motherboard? Is bigger in Size (ATX) motherboard always better? Is it so smaller in Size motherboard will consume less power? What are pros and cons of each Form factor? What there are so many Form factor were created?

    Read the article

  • List of all IBM motherboard models with a certain socket?

    - by Ricket
    I just got a really good deal on two Intel Quad Core Xeon L5420 processors and I have access to other deals on bare IBM servers (case+motherboard, no processor/ram/hdd). How can I easily find out what server or motherboard models will be compatible with this processor? I am ideally looking for a dual-processor motherboard and I see that it is socket LGA771. So I guess the underlying question is, how can I find what IBM motherboards (and servers) have dual socket LGA 771?

    Read the article

  • Is it possible to change the motherboard/bios vendor name? [closed]

    - by vignesh4303
    Possible Duplicate: How can I change my BIOS splashscreen? When we start the system we normally used to get the motherboard/vendor name for e.g i'm having the system with mercury motherboard whenever i restart my system the mercury logo will get displayed(you ll have respected vendors) and the regular process will go on .. my question is Is it there any possibility to change the name and logo of mercury(on my system &it differs based on your motherboard you are using ) on start up? if you are an laptop user "you can see the laptop vendor name e.g "dell" " For asus user's refer Bon Gart's comment ,I am in search of answer those whom feel frustrated about the motherboard/bios splash screen and whom feel to change it

    Read the article

  • Is it possible to put an 8000 series socket-F Opteron into a dual-socket motherboard?

    - by René Kåbis
    Exactly what it says on the Tin. I have a dual-socket, socket-F motherboard in which I am looking to put two high-end quad-core Opterons, but the 2000 series are nearly double the price of the 8000 series on eBay. Can I just drop in a pair of 8000 series processors and be done with it, or are there processor-critical motherboard features that would be present on a quad(+)-socket motherboard that don’t exist on a dual-socket motherboard? Please elaborate or link to resources that can explain this further, as I am not adverse to research (and I am interested in the technical issues involved) I am probably using the wrong search terms, as Google failed to return anything within the first few dozen results.

    Read the article

  • One motherboard crashed. Changed and wants to crash again

    - by CoachNono
    My computer started to freeze randomly. I was pretty sure it was the hard drive that was starting to fail. Before I could change it, the motherboard was completely dead. I bought the same one and reinstall it. Everything went working well until my computer started to freeze again and doing the same problem has before. I don't want my motherboard to burn again and I'm really wondering what can be the problem... Could it be the power supply or the video cards that burned the motherboard ? I tested the voltages of the power supply and they seemed fine... The computer worked as is for four years... Here are the specs: ASUS P5N-D Motherboard LGA 775 NVIDIA 750i SLI Intel Q6600 2X EN9600GT 512mb 650w Corsair

    Read the article

  • Motherboard memory question

    - by JERiv
    I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

    Read the article

  • How to get Processor and Motherboard Id ?

    - by Frank
    I use the code from http://www.rgagnon.com/javadetails/java-0580.html to get Motherboard Id, but the result is "null", <1 How can that be ? <2 Also I modified the code a bit to look like this to get processor Id : "Set objWMIService = GetObject(\"winmgmts:\\\\.\\root\\cimv2\")\n"+ "Set colItems = objWMIService.ExecQuery _ \n"+ " (\"Select * from Win32_Processor\") \n"+ "For Each objItem in colItems \n"+ " Wscript.Echo objItem.ProcessorId \n"+ " exit for ' do the first cpu only! \n"+ "Next \n"; The result is something like : ProcessorId = BFEBFBFF00010676 On http://msdn.microsoft.com/en-us/library/aa389273%28VS.85%29.aspx it says : ProcessorId : Processor information that describes the processor features. For an x86 class CPU, the field format depends on the processor support of the CPUID instruction. If the instruction is supported, the property contains 2 (two) DWORD formatted values. The first is an offset of 08h-0Bh, which is the EAX value that a CPUID instruction returns with input EAX set to 1. The second is an offset of 0Ch-0Fh, which is the EDX value that the instruction returns. Only the first two bytes of the property are significant and contain the contents of the DX register at CPU reset—all others are set to 0 (zero), and the contents are in DWORD format. I don't quite understand it, in plain English, is it unique or just a number for this class of processors, for instance all Intel Core2 Duo P8400 will have this number ? Frank

    Read the article

  • How to plug power/reset buttons from case to motherboard leads?

    - by MaxMackie
    I have a motherboard I salvaged from a pre-assembled computer. Except now I'm trying to use it in my own custom build. The problem is, this motherboard doesn't have any documentation because it was never meant to be used by consumers (as far as I know). I need to plug in my case's power/reset/hdd-light plugs into the motherboard. I usually check the documentation of the board to see which leads go to what connector, but I have no documentation for the board. So, as I see it, I have two options: I find the documentation (I've emailed gateway customer service, but I'm unsure of how successful I'll be with that). I simply test the leads one after the other (can this cause damage if plugged into the wrong leads?) However, there might even be a standard for which leads do what action (I'm not sure about this). For reference, my motherboard's SN/MD (?) is: H57M01G1-1.1-8EKS3H Does anyone have any idea if I can find documentation or find another way to be sure if my connections are correct?

    Read the article

  • ECC RAM in GA-G33M-DS2R? Or any Gigabyte/G33M motherboard?

    - by Gregory Hoerner
    I'm looking to retire a server which has 12GB of ECC DDR2 RAM. I'd like to upgrade my multi-purpose machine (firewall, file server, VM host for Windows Home Server, etc.) using the RAM from the server. I was just wondering: Has anyone had experience using ECC RAM in a GA-G33M-DS2R motherboard (or any Gigabyte GA-G33M-XXXX motherboard for that matter)? Has anyone had experience using ECC RAM in a motherboard with a G33M chipset. I've searched everywhere and found the attitude positive of ECC memory working in a Non-ECC board, but I would like some specific positive feedback before proceeding tonight. I have to kick the entire house offline, which I don't like to do without good reason :)

    Read the article

  • Laptop GPU apparently blew up, motherboard doesn't even turn on its power LED. [But..]

    - by leladax
    If I take out the GPU, the motherboard LED turns on but then [if it attempts to power up and boot] it turns off after 2 seconds [fans turn on normally in that short period]. [Without the GPUs out there's not even an attempt to boot.] It's an SLI motherboard for a toshiba (model X200-219). If I take out one of the GPUs (they are on top of each other) it surprisingly lets the motherboard turn on too (as it is if both are out) but it still turns off after 2-3 seconds, same behavior. I wonder if it's the GPU that produces the 'turn off after being on' behavior and not something else. [Has anyone seen this behavior with blown up GPUs or could it be something else?]

    Read the article

  • HP DX5150, MS-7050 v. 1.3 Motherboard front panel pin connectors

    - by Daniel
    I recently purchased and installed a MS-7050 v. 1.3 motherboard into a regular non-HP case and thus the front panel connectors are different than the original OEM connectors which are all bundled together. The HP support website does not have this information available and someone from HP indicated in response to a support forum question that this information is not available. What is the motherboard pin schematic for the front panel i/o connectors (power, reset, hdd led, and power led)?

    Read the article

  • Am I getting the right memory for my motherboard?

    - by Daniel Carvalho
    Hi technophiles; I have a Gigabyte GA-EP45-DS motherboard. Also, the memory that came with my computer was two Transcend aXe RAM 1066MHZ 1GB modules. The thing is, I noticed that my motherboard has "DDR2 1200" written on it. This concerns me, have I bought slower memory than my computer is supposed to have ideally? Now, I'm not super concerned at a granular level about the best optimal RAM with the best CAS latency etc... but I do hope at least that I've got the right speed. Now, as far as I know, there is no such thing as ram at 1200MHZ? Am I right? You see, because I'm thinking of getting more RAM now, before I can't find the same type or speed any-more and just want to make sure it's the right thing. Furthermore, if the memory is slower than what I should be getting for my motherboard, what RAM should I be getting, and will that new RAM play nice with my old RAM? If I get new RAM at a different speed, would it be better / more beneficial performance-wise to omit the old RAM because of how the whole DUAL channel RAM thing works? I'm not too clued up on this area. Thanks chiefs.

    Read the article

  • Can I upgrade my Soltek sl-67a-c motherboard from Pentium II to Pentium III?

    - by jedatu
    I have a Pentium III processor and I thought I would replace the Pentium II on my Soltek SL-67A-C. The motherboard has Slot 1 so the PIII fits in fine, however, when I turn on the computer the bios does not come up. Here's the link to some specs on the board: http://stason.org/TULARC/pc/motherboards/F/FLASH-TECH-INC-Pentium-II-Deschutes-SL-67A-C.html I know that I updated the bios at one time. I see references to a "67af3.zip" bios upgrade file out there but can't find any source to download it. I am thinking I may have to adjust the jumpers on the motherboard to match the speed of the processor, but I am not sure how to go about that. Any suggestions?

    Read the article

  • What will happen with my RAID5 after motherboard change?

    - by abatishchev
    Currently I have ASUS P5Q-EM and 3 HDD in RAID5 using it's on-board RAID controller Intel ICH10R. I want to bye a new motherboard, for example, Gigabyte GA-EQ45M-S2 which also have on-board RAID controller, but Intel ICH10DO. What will happen with my data on RAID5? Will I have to re-create the array from the scratch and lost all my data? Is such array a soft RAID or soft-hard? What if my current motherboard will broken? What will happen with my data?

    Read the article

  • How can I be sure that the motherboard is dead and it's not another issue?

    - by Peter
    So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >