Search Results

Search found 22139 results on 886 pages for 'security testing'.

Page 700/886 | < Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >

• Network profile reverts to 'Unidentified' following Windows Update reboot

  - by user140575

  I have searched high and low for a solution to this problem. I have multiple servers running Windows 2000 Server as well as Windows Server 2003, 2003 R2, and 2008 R2. All of these servers are on the same Active Directory domain. The servers run showing the network profile as Domain Network, which is fine and correct. However, when a Windows update is installed, the server changes the profile to Unidentified Network once it has rebooted. This then doesn't allow any traffic to the server. For security reasons, we can't turn the firewalls off for. The only way to fix the problem is to physically be in front of the machine and work on it to change the profile back. Once the Profile has been reinstated to the Domain profile, it will be fine until the next month's update. This happens on all the Windows software mentioned above. The machines are not all identical, so it's not a hardware problem either. If anyone can help I'd be very grateful.

  Read the article

• Troubleshooting certificate issues

  - by Weezy

  I'm trying to access my (European Parliament) Webmail from a Linux/Firefox machine at the following address and I get security warning messages explaining that the identity of the site cannot be verified (the error message is in french). But this only happens with Linux/Firefox from one machine. Here's the address: https://webmail.europarl.europa.eu/ (and I'm trying to access it from my home, not from the EP). And here's the detailed error message: webmail.europarl.europa.eu utilise un certificat de sécurité invalide. Le certificat n'est pas sûr car l'autorité délivrant le certificat est inconnue. (Code d'erreur : sec_error_unknown_issuer) So basically, if I translate, it is telling that the webmail.europarl.europa.eu certificate is invalid because the authority that delivered the certificate is unknown. I do only get this invalid certificate thing on Linux/Firefox. From a MacBookPro running Safari, I go to what looks like the correct webmail login page. From the same Linux machine, but using another user account and Chrome instead of Firefox, I go to what looks like the correct webmail login page. So there are several possibilities, here are a few ones: Firefox is right and my Linux box has been hacked Firefox is right and detecting something that neither Chrome nor Safari is detecting (like, say, my router that may be hacked) Safari on the MacBook Pro and Chrome on Linux are both correct and it is just Firefox on Linux that is wrongly stressing me when everything is normal. How do I know which one of these possibilities (or any other) is correct? How can I troubleshoot what is going on with either Linux/Firefox or with the parliament's webmail?

  Read the article

• How can I cache a Subversion password on a server, without storing it in unencrypted form?

  - by Zilk

  My Subversion server only provides access via HTTPS; support for svn+ssh has been dropped because we wanted to avoid creating system users on that machine just for SVN access. Now I'm trying to provide a way for users to cache their passwords for a while, without leaving them stored on the filesystem in unencrypted form. This is no problem for Gnome or KDE users, because they can use gnome-keyring and kwallet, respectively. IIRC, TortoiseSVN has a similar caching mechanism, too. But what about users on a non-GUI system? Some context: in this case, we have a development/testing server where one project has been checked out into the Apache htdocs directory. Development for this project is almost complete, and only minor text/layout changes are performed directly on this server. Nevertheless, the changes should be checked into the repository. There's no kwallet and no gnome-keyring on this system, and the ssh-agent can't help because the repository is accessed via https instead of svn+ssh. As far as I know, that leaves them the choice of entering the password every time they talk to the SVN server, or storing it in an insecure way. Is there any way to get something like what gnome-keyring and kwallet provide in a non-GUI environment?

  Read the article

• Problems with OpenVPN setup

  - by user70617

  Hi, I'm trying to set up a VPN server using OpenVPN and I'm getting some errors while trying to connect the client to the server. I'm getting the following error: Sun Feb 13 14:54:16 2011 OpenVPN 2.1.4 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] built on Feb 5 2011 Sun Feb 13 14:54:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Sun Feb 13 14:54:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Feb 13 14:54:16 2011 ******* WARNING *******: all encryption and authentication features disabled -- all data will be tunnelled as cleartext Sun Feb 13 14:54:16 2011 RESOLVE: NOTE: localhost resolves to 2 addresses Sun Feb 13 14:54:16 2011 Note: Cannot ioctl TUNSETIFF tap0: Device or resource busy (errno=16) Sun Feb 13 14:54:16 2011 Note: Attempting fallback to kernel 2.2 TUN/TAP interface Sun Feb 13 14:54:16 2011 Cannot open TUN/TAP dev /dev/tap0: No such file or directory (errno=2) Sun Feb 13 14:54:16 2011 Exiting I have bridge-utils installed and tap0 shows up in ifconfig. Can anybody give me a hand? Thanks in advance.

  Read the article

• How do I keep folders synced and backed up between two macs using a Linux NAS (rsync?)

  - by Hultner

  I've got two primary computers, one Mac Pro and one MacBook Pro for when I'm on the go. I've also got a Linux sever which also acts as NAS. Currently I backup the entire computers to an external drive with Time Machine which is rather useless and doesn't sync anything. What I really want to do is to keep my important files synced between both computers and my NAS (which is running RAID 5), that way I'm not backing up easily replaceable systemfiles and I've got all my important files in 3 places where two of them are running raid so at least 5 drives would have to crash at the same time before actual data loss occur. Folders I want to keep synced is basically my photo, documents, development, mamp and work folders and then I want to keep the user library folder backed up but not synced. I'm thinking that I'd have to use rsync but don't know how. Before suggesting Dropbox and similar suggestions I don't want to use them because of several reasons some of them being security (Dropbox obviously proved this), Speed (sometimes I'll sync gigabytes of data and that will be significantly faster locally and probably even through VPN as I have a Gigabit pipe), Space (space on my NAS is cheap and only practically limited by my needs), reliability (even if my internet were to go down I still need to be able to keep my files synced incase I'd need to go somewhere on the fly), price (I already have all the hardware and for the amount of gigabytes and bandwidth I'd need I doubt that there's any free or cheap service). Those are my main reason for wanting to keep it locally. I'm sorry for any spelling or grammatical mistakes that I've might have done. I'm writing this on my smartphone from a shaky train and English isn't my mother tongue. I gratefully appreciate any answers even if only partly solving my problem.

  Read the article

• Process killing trouble

  - by Aditya Singh

  I am trying to program a server software which involves a lot of testing on java / scala platform. Whenever i compile and execute the code. It starts listening on port 80. Sometimes i need to terminate it by Ctrl+C when it hangs. In that case, ubuntu is not freeing the port. So in order to run the process, i have to restart the machine. I see this at ps aux root 1924 0.0 0.0 5796 1660 pts/0 T 05:44 0:00 sudo scala - root 1925 0.2 1.5 491448 40796 pts/0 Tl 05:44 0:03 java -Xmx256M -Xms16M So process 1924 and 1925. I did sudo kill on both these. But then they keep on persisting even after a long time. sudo nmap -T Aggressive -A -v 127.0.0.1 -p 1-65000 Scanning localhost (127.0.0.1) [65000 ports] Discovered open port 80/tcp on 127.0.0.1 It means its still there ! sudo netstat --tcp --udp --listening --program tcp6 0 0 [::]:www [::]:* LISTEN 1925/java tcp6 0 0 ip6-localhost:ipp [::]:* LISTEN 1185/cupsd This means its 1925 - java How to kill it.

  Read the article

• What characteristic of networking/TCP causes linear relation between TCP activity and latency?

  - by DeLongey

  The core of this problem is that our application uses websockets for real-time interfaces. We are testing our app in a new environment but strangely we're noticing an increasing delay in TCP websocket packets associated with an increase in websocket activity. For example, if one websocket event occurs without any other activity in a 1-minute period, the response from the server is instantaneous. However, if we slowly increase client activity the latency in server response increases with a linear relationship (each packet will take more time to reach the client with more activity). For those wondering this is NOT app-related since our logs show that our server is running and responding to requests in under 100ms as desired. The delay starts once the server processes the request and creates the TCP packet and sends it to the client (and not the other way around). Architecture This new environment runs with a Virtual IP address and uses keepalived on a load balancer to balance the traffic between instances. Two boxes sit behind the balancer and all traffic runs through it. Our host provider manages the balancer and we do not have control over that part of the architecture. Theory Could this somehow be related to something buffering the packets in the new environment? Thanks for your help.

  Read the article

• LTO 2 tape performance in LTO 3 drive

  - by hmallett

  I have a pile of LTO 2 tapes, and both an LTO 2 drive (HP Ultrium 460e), and an autoloader with an LTO 3 drive in (Tandberg T24 autoloader, with a HP drive). Performance of the LTO 2 tapes in the LTO 2 drive is adequate and consistent. HP L&TT tells me that the tapes can be read and written at 64 MB/s, which seems in line with the performance specifications of the drive. When I perform a backup (over the network) using Symantec Backup Exec, I get about 1700 MB/min backup and verify speeds, which is slower, but still adequate. Performance of the LTO 2 tapes in the LTO 3 drive in the autoloader is a different story. HP L&TT tells me that the tapes can be read at 82 MB/s and written at 49 MB/s, which seems unusual at the write speed drop, but not the end of the world. When I perform a backup (over the network) using Symantec Backup Exec though, I get about 331 MB/min backup speed and 205 MB/min verify speeds, which is not only much slower, but also much slower for reads than for writes. Notes: The comparison testing was done on the same server, SCSI card and SCSI cable, with the same backup data set and the same tape each time. The tape and drives are error-free (according to HP L&TT and Backup Exec). The SCSI card is a U160 card, which is not normally recommended for LTO 3, but we're not writing to LTO 3 tapes at LTO 3 speeds, and a U320 SCSI card is not available to me at the moment. As I'm scratching my head to determine the reason for the performance drop, my first question is: While LTO drives can write to the previous generation LTO tapes, does doing so normally incur a performance penalty?

  Read the article

• Firefox and Chrome keeps forcing HTTPS on Rails app using nginx/Passenger

  - by Steve

  I've got a really weird problem here where every time I try to browse my Rails app in non-SSL mode Chrome (v16) and Firefox (v7) keeps forcing my website to be served in HTTPS. My Rails application is deployed on a Ubuntu VPS using Capistrano, nginx, Passenger and a wildcard SSL certificate. I have set these parameters for port 80 in the nginx.conf: passenger_set_cgi_param HTTP_X_FORWARDED_PROTO http; passenger_set_cgi_param HTTPS off; The long version of my nginx.conf can be found here: https://gist.github.com/2eab42666c609b015bff The ssl-redirect.include file contains: rewrite ^/sign_up https://$host$request_uri? permanent ; rewrite ^/login https://$host$request_uri? permanent ; rewrite ^/settings/password https://$host$request_uri? permanent ; It is to make sure those three pages use HTTPS when coming from non-SSL request. My production.rb file contains this line: # Enable HTTP and HTTPS in parallel config.middleware.insert_before Rack::Lock, Rack::SSL, :exclude => proc { |env| env['HTTPS'] != 'on' } I have tried redirecting to HTTP via nginx rewrites, Ruby on Rails redirects and also used Rails view url using HTTP protocol. My application.rb file contains this methods used in a before_filter hook: def force_http if Rails.env.production? if request.ssl? redirect_to :protocol => 'http', :status => :moved_permanently end end end Every time I try to redirect to HTTP non-SSL the browser attempts to redirect it back to HTTPS causing an infinite redirect loop. Safari, however, works just fine. Even when I've disabled serving SSL in nginx the browsers still try to connect to the site using HTTPS. I should also mention that when I pushed my app on to Heroku, the Rails redirect work just fine for all browsers. The reason why I want to use non-SSL is that my homepage contains non-secure dynamic embedded objects and a non-secure CDN and I want to prevent security warnings. I don't know what is causing the browser to keep forcing HTTPS requests.

  Read the article

• Is TrueCrypt truly safe?

  - by Alfred

  Hi. I have been using TrueCrypt for a long time now. However, someone pointed me to a link that described the problems with the license. IANAL and so it really didn't make much sense to me, however I wanted my encryption software to be open source - not because I could hack into it but because I could trust it. Some of the issues with it I have noticed: There is no VCS for the source code. Is this OK? There are no change logs. The forums are a bad place to be. They ban even if you ask a genuine question. Who really owns TrueCrypt? There were some reports of tinkering with the md5 checksums. To be honest, the only reason why I used TrueCrypt was because it was open source. But however, somethings are just not right. Has anyone ever validated the security of TrueCrypt? Should I really be worried? Yes I am paranoid; if I use an encryption software, I trust it with all my life. If all my concerns are genuine, is there any other open source alternative to TrueCrypt?

  Read the article

• Router gets disconnected once I terminate my SIP application

  - by TacB0sS

  Hey, Here is an interesting one, I have a SIP VoIP application which is able to register to the PBX server, and I can invite and see the user call on the callee end receiving an Invite, and on the caller end I see the Ringing response... now here is interesting part, if I close my application with out any notification to the server my router disconnects and restart, after a short while (30 - 150 sec). I could fix that if I would complete the ACK BYE process, but I'm just wondering why does my router hangs up? any ideas? My Router is TNN-Siemens SL2-141, thought this might matter Update: this is what I found: SIP ALG allows two or more simultaneous VoIP phone calls made by VoIP clients through this router. which means that if I disable it I would not be able to do the testing I'm trying so badly to do, and since I don't have access to another router, I must handle it with the bug then... I can say that this never happened to me with one user connecting, but then again I didn't have anyone to invite then, I received from the SIP UAS 503 when I tried to invite an imaginary user. This bug only occur after I connected the second SIP UAC and invited it and closed the application. Adam.

  Read the article

• Dual Monitor support rdp 7 to win 7 on esxi

  - by rphilli5

  I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

  Read the article

• IIS7 Session ID rotating with Classic ASP

  - by ManiacZX

  I am trying to migrate a Classic ASP app onto a Windows 2008 R2 server. The application features run fine, but I am having issue with session. The application keeps the logged in user information in session and I am constantly getting knocked out as if the session had expired. While debugging I have discovered the sessions are not expiring but instead I am getting 2-3 different Session IDs in use by one browser. I am outputting Response.Write(Session.SessionID) on various pages in the application and I can sit there and hit refresh over and over and watch the number changed between these 2-3 SessionIDs randomly. The sessions are still valid because when I refresh and get the Session ID that I logged in under the page is displayed (because the security check was successful) and when I get one of the other Session IDs I get the "you aren't logged in, you need to log in" message. If I close and re-open the browser, same story just the set of IDs are new. This happens with IE8, Firefox and Chrome from multiple computers. Things I've tried: - AppPool set to No Managed Code and Classic - Output Caching set .asp to never cache - ASP Session Properties enabled and disabled asp session state and confirmed it affected page (error trying to read Session.SessionID when disabled) Things I've tried just in case but shouldn't have anything to do with ASP Session: - Disabled compression - Changed ASP.Net Session State properties (InProc, StateServer, SQLServer, Cookies, URI, etc) -

  Read the article

• Missing Home Folder XP Clients 2008R2 Domain

  - by minamhere

  We just completed a migration from Server 2003 to Server 2008R2. Everything seems to have gone well except that many of our desktops have stopped mapping the Home Folder as set in Active Directory. Other mappings that are defined on individual clients are mapping just fine, these mappings are all on the same file server as the failing Home Folders. Half of the users are on 1 file server and half are on another. Users from both servers are having this problem. I have enabled the Group Policy setting to "Wait for network before logging in". I enabled the policy to "Run Logon Scripts synchronously". There are no errors on the Domain Controller or either File Server. When I enabled Group Policy Preferences as an attempted workaround, I get this error: The user 'V:' preference item in the '<Policy Name>' Group Policy object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed. This seems to indicate that the network connection is not ready by the time Group Policy is processed. But isn't this the point of the "Wait before logging in" and "Run Logon scripts synchronously" settings? Some other background facts: The new Server 2008R2 installation is a Virtual Machine. It is on a new Subnet in a different building from the old server. DNS and DHCP were also migrated from the old DC to this new DC. These Home Folders were all working properly before the migration. Are there new security restrictions/policies in Server 2008R2 that might be causing this? Is there a way to check whether I have an underlying network connectivity issue? Maybe moving the server to the new building is causing a delay/timeout? Any thoughts or ideas on what could be causing this or how I can resolve this? Thanks.

  Read the article

• Mod_Perl configuration for multiple domains

  - by daliaessam

  Reading the Mod_Perl module documentation, can we configure it on per domain basis, what I mean can we configure it to run on every domain or specific domain only. What I see in the docs is: Registry Scripts To enable registry scripts add to httpd.conf: Alias /perl/ /home/httpd/2.0/perl/ <Location /perl/> SetHandler perl-script PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </Location> and now assuming that we have the following script: #!/usr/bin/perl print "Content-type: text/plain\n\n"; print "mod_perl 2.0 rocks!\n"; saved in /home/httpd/httpd-2.0/perl/rock.pl. Make the script executable and readable by everybody: % chmod a+rx /home/httpd/httpd-2.0/perl/rock.pl Of course the path to the script should be readable by the server too. In the real world you probably want to have a tighter permissions, but for the purpose of testing, that things are working, this is just fine. From what I understand above, we can run Perl scripts only from one specific folder that we put the directive above. So the question again, can we make this directive per domain for all domains or for specific number of domains?

  Read the article

• Tips on setting up a virtual lab for self-learning networking topics

  - by Harry

  I'm trying to self-learn the following topics on Linux (preferably Fedora): Network programming (using sockets API), especially across proxies and firewalls Proxies (of various kinds like transparent, http, socks...), Firewalls (iptables) and 'basic' Linux security SNAT, DNAT Network admininstration power tools: nc, socat (with all its options), ssh, openssl, etc etc. Now, I know that, ideally, it would be best if I had 'enough' number of physical nodes and physical network equipment (routers, switches, etc) for this self-learning exercise. But, obviously, don't have the budget or the physical space, nor want to be wasteful -- especially, when things could perhaps be simulated/emulated in a Linux environment. I have got one personal workstation, which is a single-homed Fedora desktop with 4GB memory, 200+ GB disk, and a 4-core CPU. I may be able to get 3 to 4 additional low-end Fedora workstations. But all of these -- including mine -- will always remain strictly behind our corporate firewall :-( Now, I know I could use VirtualBox-based virtual nodes, but don't know if there are any better alternatives disk- and memory- footprint-wise. Would you be able to give me some tips or suggestions on how to get started setting up this little budget- and space-constrained 'virtual lab' of mine? For example, how would I create virtual routers? Has someone attempted this sort of thing before: namely, creating a virtual network lab behind a corporate firewall for learning/development/testing purposes? I hope my question is not vague or too open-ended. Basically, right now, I don't know how to best leverage the Linux environment and the various 'goodies' it comes with, and buying physical devices only when it is absolutely necessary.

  Read the article

• Samba 3.5 Shadow Copy for Windows 7

  - by Prashanth Sundaram

  Over the past several days I have been trying to get the shadow to work with samba but haven’t been successful. Can someone check below config and let me know if I am missing something? We are using Equallogic SAN and iSCSI LUNS to mount volumes. I can cleanly access samba shares on Windows 7 clients but just not shadow copy. I have referred the official how-to but couldn’t get it to work. I see these messages in the logs. Any help is deeply appreciated. [2012/10/31 12:20:53.549863, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. [2012/10/31 12:21:13.887198, 0] modules/vfs_shadow_copy2.c:734(shadow_copy2_get_shadow_copy2_data) shadow:snapdir not found for /fs/test-01 in get_shadow_copy_data [2012/10/31 12:21:13.887265, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. == Samba pkgs == samba-3.5.10-116.el6_2.x86_64 samba-common-3.5.10-116.el6_2.x86_64 samba-winbind-clients-3.5.10-116.el6_2.x86_64 samba-client-3.5.10-116.el6_2.x86_64 === df –h == First is the iSCSI LUN and 2 others are snapshots. /dev/mapper/eql-0-fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01 /dev/mapper/eql-2-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.26-17.32.42/fs/test-01 (SNAPSHOT-1) /dev/mapper/eql-d-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.31-11.52.42/fs/test-01 (SNAPSHOT- 2) ===/etc/samba/smb.conf === [global] workgroup = DOMAIN server string = Samba Server Version %v security = ads realm = DOMAIN.CORP encrypt passwords = yes guest account = nobody map to guest = bad uid log file = /var/log/samba/%m.log domain master = no local master = no preferred master = no os level = 0 load printers = no show add printer wizard = no printable = no printcap name = /dev/null disable spoolss = yes follow symlinks = yes wide links = yes unix extensions = no [test] comment = Test Directories path = /fs/test-01 vfs objects = shadow_copy2 #shadow_copy2: sort = desc #shadow: localtime = yes #shadow: snapdir = /fs/test-01/test #shadow: basedir = /fs/test-01 guest ok = yes writeable = yes map archive = no force create mode = 0660 force directory mode = 2770 inherit owner = yes inherit permissions = yes All feedback is welcome. Thanks!

  Read the article

• Port forwarding for samba

  - by EternallyGreen

  Alright, here's the setup: Internet - Modem - WRT54G - hubs - winxp workstations & linux smb server. Its basically a home-style distributed internet connection setup, except its at a school. What I want is remote, offsite smb access. I figured I'd need to find out which ports need forwarding and then forward them to the server on the router. I'm told in another question on SF that multiple ports will need forwarding, and it gets somewhat complicated. One of the things I need to know is which ports require forwarding for this, and what complications or vulnerabilities could arise from this. Any additional information you think I should have before doing this would be great. I'm told SMB doesn't support encryption, which is fine. Given I set up authentication/access control, all this means is that once one of my users authenticates and starts downloading data, the unencrypted traffic could be intercepted and read by a MITM, correct? Given that that's the only problem arising from lack of encryption, this is of no concern to me. I suppose that it could also mean a MITM injecting false data into the data stream, eg: user requests file A, MITM intercepts and replaces the contents of file A with some false data. This isn't really an issue either, because my users would know that something was wrong, and its not likely anyone would have incentive to do this anyway. Another thing I've been informed of is Microsoft's poor implementation of SMB, and its crap track record for security. Does this apply if only the client-end is MS? My server is linux.

  Read the article

• Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

  - by MasterRoot24

  I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

  Read the article

• I love google Chrome, but some non-static pages like Piwik render it unresponsive

  - by gogowitsch

  The web-stat software Piwik stops reacting on mouse clicks after 1-2 seconds. The same is true for Google Maps and Producteev (but GMail and most other pages work like a charm). These rely heavily on JS, and work without Flash. I can click for a very short time period and then the mouse cursor doesn't feel the UI anymore (it doesn't turn into a I over input fields, though it moves; if the freeze occured while the pointer was over an input field, the cursor keeps being a I) and all clicks on the DOM are being ignored by Chrome. No message appears, neither obvious nor in the Console (F12). There is no obstructing div or the like in the DOM (F12). Since I couldn't find any hints on the source of my problems, I suspected my plugins and extensions. Unfortunately, neither deactivating all plugins nor all extensions solved the problem. for the problematic pages, it always happens no Dropbox running several GB of free RAM the taskmanager doesn't show any high CPU or memory utilization (the offending tab uses 30 MB and uses 0-1 % CPU) all problematic pages work in other browsers (Chrome, Firefox, IE) the rest of the computer is very responsive the computers use different security suites (Kaspersky and Avira) The effect exists between several (synchronized) Chrome instances on different machines, all running Windows 7. Both the OS and Chrome are updated automatically. Other tabs and the Chrome chrome (tabs, menus, toolbar buttons of the browser itself) still work. I really don't like switching between browsers. Any ideas?

  Read the article

• how to cause linux system datetime to run faster than real world datetime?

  - by JamesThomasMoon1979

  Background I want to monitor a running linux system over several days. It's a custom gentoo build and with much custom software on board. This software has ongoing maintenance timers and cron scripts and other clock driven events. I need to verify these scheduled events are working. Problem Waiting for the system to step through daily and weekly activity is a long wait time. And modifying all clock-based timers on the system would be time consuming. Yet, I often want to test a system's end-to-end scheduled activities without waiting a week. Potential Solution Have the linux system under test appear to run through it's daily cycle of activity within just a few hours. My Question for Serverfault Is there a way to cause the system's time to run faster than real world time? My first thought is manipulating the ntp daemon to repeatedly and smoothly increment the clock . Any other ideas? And yes, I know this may have strange side affects. However, the system has no important or time critical interactions with systems outside of itself. And this may be a valuable testing technique.

  Read the article

• Could this server log mean my server is being used as a proxy?

  - by So Over It

  I came across the following entry in my access.log: 58.218.199.147 - - [05/Jun/2012:12:56:04 +1000] "GET http://proxyproxys.com/ HTTP/1.1" 200 183 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" Normally when I see a full URL entry in my access.log I assume it is log spam with people trying to get me to access their site. These entries are normally followed with a 404 response. The above entry is followed with a 200 'success' response! Doing some searching it would seem that this can occur when someone is trying to use your server as a proxy. This disturbed me more - especially because the URL in question has the word proxy in it. Going to the site 'proxyproxys.com' (using hidemyass.com to protect my own identity), the site returns what appears to be some sort of 'proxy judge' ---------------------------------------- HTTP_ACCEPT=text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 HTTP_ACCEPT_LANGUAGE=en-US,en;q=0.8 HTTP_USER_AGENT=Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.53 Safari/536.5 HTTP_CONNECTION=close REMOTE_PORT=56355 REMOTE_HOST=74.63.112.142 REMOTE_ADDR=74.63.112.142 ---------------------------------------- CS_ProxyJudge Result=HIGH_ANONYMITY ---------------------------------------- Question: 1) does the 200 success mean that someone has been able to successfully use my server as a proxy? 2) are there other means of confirming if my server is being used as a proxy 3) can you refer me to documentation to help 'close up' my security gap if there is one. Thanks.

  Read the article

• A Domain Admin user doesn't have effective Administrative rights on a Domain Computer

  - by rwetzeler

  I am a developer who is setting up a virtual domain environment of testing purposes and am having trouble with the setup. I have created a new DC on a new Forest... call it dev.contoso.com. I have setup a virtual internal network for all machines that are going to be apart of this virtual test environment and have given each machine a static IP address in the 192.169.150.0 subnet. I have added machine1.dev.contoso.com to the domain dev.contoso.com. I have also provisioned a user account (adminuser) in the domain and made that user a member of Domain Admins group. Upon logging into machine1 using my newly created Domain Admin account, I cannot access/run any files on machine1. When I go into the advanced permissions for the c:\ folder and goto properties - Security Tab - Advanced - Effective Permissions and search for the dev\adminuser (mentioned above), I get an error saying: Windows can't calculate the effective permissions for admin user What do I need to do to get Administrative rights on Machine1? I am using Server 2008 R2 for both the AD controller and machine1.

  Read the article

• How can I "share" a network share over the internet to multiple operating systems?

  - by Minsc

  Hello all, We have a network share accessible through our intranet that is widely used. This share has it's own set of fine tuned permissions. I have been tasked with allowing A.D. authenticated access to this share over the internet without the use of VPN. The internet access has to mimic the NTSF permissions in place on the share. Another piece of the puzzle is that the access over the internet has to allow perusal of the share from Windows and Mac OS systems. I had envisioned a web front end that would facilitate downloading to and uploading from the share via a web browser. I'm trying to ask for some suggestions about what type of setup is necessary to achieve this. I've done loads of testing and searching for solutions but I can't seem to get anything to work as I hope. The web server that will be handing all of this is a Windows 2K8 box with IIS 7. How can I allow the users to authenticate against Active Directory when coming from the internet even when coming from a Mac system? I hope my question is not too broad, I'm sorry if I should have broken it up into multiple questions. It all is just tied together in my head. Thank you all for your time and aid.

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

< Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >