high performance - Page 710

What Can We Learn About Software Security by Going to the Gym

- by Nick Harrison

There was a recent rash of car break-ins at the gym. Not an epidemic by any stretch, probably 4 or 5, but still... My gym used to allow you to hang your keys from a peg board at the front desk. This way you could come to the gym dressed to work out, lock your valuables in your car, and not have anything to worry about. Ignorance is bliss. The problem was that anyone who wanted to could go pick up your car keys, click the unlock button and find your car. Once there, they could rummage through your stuff and then walk back in and finish their workout as if nothing had happened. The people doing this were a little smatter then the average thief and would swipe some but not all of your cash leaving everything else in place. Most thieves would steal the whole car and be busted more quickly. The victims were unaware that anything had happened for several days. Fortunately, once the victims realized what had happened, the gym was still able to pull security tapes and find out who was misbehaving. All of the bad guys were busted, and everyone can now breathe a sigh of relieve. It is once again safe to go to the gym. Except there was still a fundamental problem. Putting your keys on a peg board by the front door is just asking for bad things to happen. One person got busted exploiting this security flaw. Others can still be exploiting it. In fact, others may well have been exploiting it and simply never got caught. How long would it take you to realize that $10 was missing from your wallet, if everything else was there? How would you even know when it went missing? Would you go to the front desk and even bother to ask them to review security tapes if you were only missing a small amount. Once highlighted, it is easy to see how commonly such vulnerability may have been exploited. So the gym did the very reasonable precaution of removing the peg board. To me the most shocking part of this story is the resulting uproar from gym members losing the convenient key peg. How dare they remove the trusted peg board? How can I work out now, I have to carry my keys from machine to machine? How can I enjoy my workout with this added inconvenience? This all happened a couple of weeks ago, and some people are still complaining. In light of the recent high profile hacking, there are a couple of parallels that can be drawn. Many web sites are riddled with vulnerabilities are crazy and easily exploitable as leaving your car keys by the front door while you work out. No one ever considered thanking the people who were swiping these keys for pointing out the vulnerability. Without a hesitation, they had their gym memberships revoked and are awaiting prosecution. The gym did recognize the vulnerability for what it is, and closed up that attack vector. What can we learn from this? Monitoring and logging will not prevent a crime but they will allow us to identify that a crime took place and may help track down who did it. Once we find a security weakness, we need to eliminate it. We may never identify and eliminate all security weaknesses, but we cannot allow well known vulnerabilities to persist in our system. In our case, we are not likely to meet resistance from end users. We are more likely to meet resistance from stake holders, product owners, keeper of schedules and budgets. We may meet resistance from integration partners, co workers, and third party vendors. Regardless of the source, we will see resistance, but the weakness needs to be dealt with. There is no need to glorify a cracker for bringing to light a security weakness. Regardless of their claimed motives, they are not heroes. There is also no point in wasting time defending weaknesses once they are identified. Deal with the weakness and move on. In may be embarrassing to find security weaknesses in our systems, but it is even more embarrassing to continue ignoring them. Even if it is unpopular, we need to seek out security weaknesses and eliminate them when we find them. http://www.sans.org has put together the Common Weakness Enumeration http://cwe.mitre.org/ which lists out common weaknesses. The site navigation takes a little getting used to, but there is a treasure trove here. Here is the detail page for SQL Injection. It clearly states how this can be exploited, in case anyone doubts that the weakness should be taken seriously, and more importantly how to mitigate the risk.

Read the article

Drive Online Engagement with Intuitive Portals and Websites

- by kellsey.ruppel

As more and more business is being conducted via online channels, engaging users and making them more productive and efficient though these online channels is becoming critical. These users could be customers, partners or employees and while the respective channels through which they interact might be different, these users do increasingly interact with your business through the Web, or mobile devices or now through various social mediums. Businesses need a user engagement strategy and solution that allows them to deliver targeted and personalized content and applications to users through the various online mediums and touch points. The customer experience today is made up of an ongoing set of interactions with organizations across many channels, online and offline. The Direct channel (including sales reps, email and mail) is an important point of contact, as is the Contact Center. Contact Centers rely on the phone as a means of interacting with customers, and also more now than ever, the Web as well. However, the online organization is often managed separately from the Contact Center organization within a business. In-store is an important channel for retailers, offering Point-of-Service for human interactions, and Kiosks which enable self-service. Kiosks are a Web-enabled touch point but in-store kiosks are often managed by the head of retail operations, rather than the online organization. And of course, the online channel, including customer interactions with an organization via digital means -- on the website, mobile websites, and social networking sites, has risen to paramount importance in recent years in the customer experience. Historically all of these channels have been managed separately. The result of all of this fragmentation is that the customer touch points with an organization are siloed. Their interactions online are not known and respected in their dealings in-store. Their calls to the contact center are not taken as input into what the website offers them when they arrive. Think of how many times you’ve fallen victim to this. Your experience with the company call center is different than the experience in-store. Your experience with the company website on your desktop computer is different than your experience on your iPad. I think you get the point. But the customer isn’t the only one we need to look at here, as employees and the IT organization have challenges as well when it comes to online engagement. There are many common tools and technologies that organizations have been using to try and engage users, whether it’s customers, employees or partners. Some have adopted different blog and wiki technologies (some hosted, some open source, sometimes embedded in platforms), to things like tagging, file sharing and content management, or composite applications for self-service applications and activity streams. Basically, there are so many different tools & technologies that each address different aspects of user engagement. Now, one of the challenges with this, is that if we look at each individual tool, typically just implementing for example a file sharing and basic collaboration solution, may meet the needs of the business user for one aspect of user engagement, but it may not be the best solution to engage with customers and partners, or it may not fit with IT standards such as integrating with their single sign on tools or their corporate website. Often, the scenario is that businesses are having to acquire multiple pieces and parts as well as build custom applications to meet their needs. Leaving customers and partners with a more fragmented way of interacting with the company. Every organization has some sort of enterprise balancing act between the needs of the business user and the needs and restrictions enforced by enterprise IT groups. As we’ve been discussing, we all know that the expectations for online engagement have changed since the days of the static, one-size fits all website. With these changes have come some very difficult organizational challenges as well. Today, as a business user, you want to engage with your customers, and your customers expect you to know who they are. They expect you to recall the details they’ve provided to you on your website, to your CSRs and to your sales people. They expect you to remember their purchases, their preferences and their problems. And they expect you to know who they are, equally well, across channels, including your web presence. This creates a host of challenges for today’s business users. Delivering targeted, relevant content online is now essential for converting prospects into customers and for engendering long term loyalty. Business users need the ability to leverage customer data from different sources to fuel their segmentation and targeting strategies and to easily set-up, manage and optimize online campaigns. Also critical, they need the ability to accomplish these things on-the-fly, at the speed of the marketplace, while making iterative improvements. These changing expectations put a host of demands on the IT organization as well. The web presence must be able to scale to support the delivery of personalized and targeted content to thousands of site visitors without sacrificing performance. And integration between systems becomes more important as well, as organizations strive to obtain one view of the customer culled from WCM data, CRM data and more. So then, how do you solve these challenges and meet the growing demands of your users? You need a solution that: Unifies every customer interaction across all channels Personalizes the products and content that interest the customer and to the device Delivers targeted promotions to the right customer Engages and improve employee productivity Provides self-service access to applications Includes embedded in-context social So how then do you achieve this level of online engagement, complete customer experience and engage your employees? The answer: Oracle WebCenter. If you want to learn how to get there, we encourage you to attend this webcast on Thursday Drive Online Engagement with Intuitive Portals and Websites, where we'll talk about how you are able to transform your portal experience and optimize online engagement -- making your portals more interactive and more engaging across multiple channels. Register today!

Read the article

Why everybody should do Sales!

- by FelixWehmeyer

I speak with many business students and ask them what job they want to get into. Most of them tell me they want a job in Marketing, Management Consulting or Finance. I hardly ever hear “Sales, that is what I want to do”, and I often wonder why. I would like to start with a quote from Zig Ziglar, a successful salesman: "Nothing happens until someone sells something." But to get back to the main point, why wouldn’t you want to get in sales? When people think of sales, they picture a typical salesman in their head and think that selling is scary and all about manipulating, pressuring and pushing someone into buying something they don’t need. Are these stereotypes accurate? I don’t believe so: So why should you want to be in sales? If you think about selling as providing the solution for the problem and talking about the benefits of making a decision, then every job in this world comes out of selling. In every job you deal with coworkers that you want to convince of your ideas or convincing your boss that the project you want to work on is good for the company. These days, consumers and businesses are very well informed about services and products. When we are talking about highly complex products, such as IT solutions, businesses don’t accept your run-of-the-mill salesman who is pushing a sale. These are often long projects where salespeople have a consulting and leading role. Salespeople need to be able to consult companies and customers with their problem and convince a client that their solution is the best fit. Next to the fact that sales, is by far, not as scary and shady as you thought, there are a few points that will make you want to consider a sales career: Negotiating skills – When you are in sales you will learn how to negotiate. Salespeople learn to listen to their customers and try to make them happy, overcoming objections and come to a final agreement that both parties are happy with. Persistence/Challenge – As a salesperson you will often hear a negative answer, in a sales role you will start to embrace this and see a ‘no’ as a challenge not as a rejection. This attitude change can help you a lot in your career, but also in your personal life. You will become more optimistic and gain a go-getter attitude. Salary – As salespeople are seen as the moneymakers for the company, companies often reward their sales teams generously. Most likely in a sales role, you will receive a good basic salary and often you get nice bonuses on top of that based on your performance. Oracle is, for instance, the company that offers the highest average commission in the world. Further you can expect many other benefits as companies know that there is a high demand for good salespeople. Teamwork – Sales is a lot like having your own business, you are responsible for your own territory or set of clients. You are the one who is responsible for the revenue coming from that territory. So in order to gain revenue you will have to work together with many departments and people to make that happen. Every (potential) client could be seen as a different project, and you are the project leader. Understanding customers and the business – From any job that you choose sales will get you the most insight in the market. Salespeople are usually well-connected, talk with different customers and learn about the market and are up-to-date about all latest changes. Even if you want to change to a different role in the long run, you have a great head start as you understand the market and customers like no one else. Job security – Look at all the job postings out there. Many of them are sales-related. So if you want to have a steady job, plenty of choice and companies willing to invest in you, sales could be something for you. Are you interested in exploring a sales career? At Oracle we are always looking for good sales professionals and fresh graduates who want to get into sales! For many languages such as Flemish, Dutch, German, French, Swedish and Norwegian (and more) we are currently looking for graduates who want to develop their career in Oracle. Please have a look at this article for the experience of a Business Development Consultant at Oracle in Dublin. Want to learn more about this job check out this link or send an email to jessica.ebbelaar-at-oracle.com! Have a look at our website http://campus.oracle.com for all of our other latest sales and non-sales vacancies!

Read the article

Use your own domain email and tired of SPAM? SPAMfighter FTW

- by Dave Campbell

I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

Read the article

yield – Just yet another sexy c# keyword?

- by George Mamaladze

yield (see NSDN c# reference) operator came I guess with .NET 2.0 and I my feeling is that it’s not as wide used as it could (or should) be. I am not going to talk here about necessarity and advantages of using iterator pattern when accessing custom sequences (just google it). Let’s look at it from the clean code point of view. Let's see if it really helps us to keep our code understandable, reusable and testable. Let’s say we want to iterate a tree and do something with it’s nodes, for instance calculate a sum of their values. So the most elegant way would be to build a recursive method performing a classic depth traversal returning the sum. private int CalculateTreeSum(Node top) { int sumOfChildNodes = 0; foreach (Node childNode in top.ChildNodes) { sumOfChildNodes += CalculateTreeSum(childNode); } return top.Value + sumOfChildNodes; } “Do One Thing” Nevertheless it violates one of the most important rules “Do One Thing”. Our method CalculateTreeSum does two things at the same time. It travels inside the tree and performs some computation – in this case calculates sum. Doing two things in one method is definitely a bad thing because of several reasons: · Understandability: Readability / refactoring · Reuseability: when overriding - no chance to override computation without copying iteration code and vice versa. · Testability: you are not able to test computation without constructing the tree and you are not able to test correctness of tree iteration. I want to spend some more words on this last issue. How do you test the method CalculateTreeSum when it contains two in one: computation & iteration? The only chance is to construct a test tree and assert the result of the method call, in our case the sum against our expectation. And if the test fails you do not know wether was the computation algorithm wrong or was that the iteration? At the end to top it all off I tell you: according to Murphy’s Law the iteration will have a bug as well as the calculation. Both bugs in a combination will cause the sum to be accidentally exactly the same you expect and the test will PASS. J Ok let’s use yield! That’s why it is generally a very good idea not to mix but isolate “things”. Ok let’s use yield! private int CalculateTreeSumClean(Node top) { IEnumerable<Node> treeNodes = GetTreeNodes(top); return CalculateSum(treeNodes); } private int CalculateSum(IEnumerable<Node> nodes) { int sumOfNodes = 0; foreach (Node node in nodes) { sumOfNodes += node.Value; } return sumOfNodes; } private IEnumerable<Node> GetTreeNodes(Node top) { yield return top; foreach (Node childNode in top.ChildNodes) { foreach (Node currentNode in GetTreeNodes(childNode)) { yield return currentNode; } } } Two methods does not know anything about each other. One contains calculation logic another jut the iteration logic. You can relpace the tree iteration algorithm from depth traversal to breath trevaersal or use stack or visitor pattern instead of recursion. This will not influence your calculation logic. And vice versa you can relace the sum with product or do whatever you want with node values, the calculateion algorithm is not aware of beeng working on some tree or graph. How about not using yield? Now let’s ask the question – what if we do not have yield operator? The brief look at the generated code gives us an answer. The compiler generates a 150 lines long class to implement the iteration logic. [CompilerGenerated] private sealed class <GetTreeNodes>d__0 : IEnumerable<Node>, IEnumerable, IEnumerator<Node>, IEnumerator, IDisposable { ... 150 Lines of generated code ... } Often we compromise code readability, cleanness, testability, etc. – to reduce number of classes, code lines, keystrokes and mouse clicks. This is the human nature - we are lazy. Knowing and using such a sexy construct like yield, allows us to be lazy, write very few lines of code and at the same time stay clean and do one thing in a method. That's why I generally welcome using staff like that. Note: The above used recursive depth traversal algorithm is possibly the compact one but not the best one from the performance and memory utilization point of view. It was taken to emphasize on other primary aspects of this post.

Read the article

VS2010 crashes when opening a vsp generated using VS 2012

- by Tarun Arora

I recently profiled some web applications using Visual Studio 2012, a vsp (Visual Studio Profile) file was generated as a result of the profiling session. I could successfully open the vsp file in Visual Studio 2012 as expected but when I tried to open the vsp file in Visual Studio 2010 the VS2010 IDE crashed. As a responsible citizen I raised bug # 762202 on Microsoft Connect site using the Microsoft Visual Studio 2012 Feedback Client. Note – In case you didn’t already know, VSP generated in Visual Studio 2012 is not backward compatible. Please refer below for the steps to reproduce the issue and the resolution of the connect bug. 1. Behaviour and Steps to Reproduce the Issue Description I have generated a vsp file by using the Visual Studio 2012 Standalone profiler. When I try and open the vsp file in Visual Studio 2010 the IDE crashes. I understand that a vsp generated by using VS 2012 cannot be opened in VS 2010, but the IDE crashing is not the behaviour I would expect to see. Steps to Reproduce the Issue 1. Pick up the Stand lone profiler from the VS 2012 installation media. The folder has both x 64 and x86 installer, since the machine I am using is x64 bit. I have installed the x64 version of the standalone profiler. 2. I have configured the system path by setting the 'environment variable' path to where the profiler is installed. In my case this is, C:\Program Files (x86)\Microsoft Visual Studio 11.0\Team Tools\Performance Tools 3. Created a new environment variable _NT_SYMBOL_PATH and set its value to CACHE*C:\SYMBOLSCACHE;SRV*C:\SYMBOLSCACHE*HTTP://MSDL.MICROSOFT.COM/DOWNLOAD/SYMBOLS;\\FOO\BUILD1234 4. Open up CMD as an administrator and run 'VSPerfASPNETCmd /tip http://localhost:56180/ /o:C:\Temp\SampleEISK.vsp' 5. This generates the following message on the cmd Microsoft (R) VSPerf ASP.NET Command, Version 11.0.0.0 Copyright (C) Microsoft Corporation. All rights reserved. Configuring and attaching to ASP.NET process. Please wait. Setting up profiling environment. Starting monitor. Launching ASP.NET service. Attaching Monitor to process. Launching Internet Explorer. The profiler is attached to ASP.net. Please run your application scenario now. Press Enter to stop data collection... 6. I perform certain actions and then I come back to the cmd and hit enter to shut down the profiling. Once I do this, the following message is written to the cmd, Press Enter to stop data collection... Profiling now shut down. Report file "C:\Temp\SampleEISK.vsp" was generated. Running VsPerfReport, packing symbols into the .VSP. Shutting down profiling and restarting ASP.NET. Please wait. Restarting w3wp.exe. 7. I look in the C:\Temp folder and I can see the SampleEISK.vsp file generated. I can successfully open this file in Visual Studio 2012. 8. When I am trying to open the vsp file in VS 2010 the VS 2010 IDE crashes. Kaboooom! What I would expect to happen I expect to receive a message "VS 2010 does not support the vsp file generated by VS 2012". What actually happened The VS 2010 IDE crashed 2. Resolution This is a valid bug! However, there isn’t much value in releasing a hotfix for this issue. Refer below to the resolution provided by the Visual Studio Profiler Team. Thank you for taking the time to report this issue. We completely agree that Visual Studio 2010 should not crash. However in this particular case this is not a bug we are going to retroactively release a fix to 2010 for at this point. Given that a fix would not unblock the scenario of opening a 2012 created file on Visual Studio 2010, and there is not an active update channel for Visual Studio 2010 other than manually locating and installing hot fixes, we will not be fixing this particular issue. Best Regards, Visual Studio Profiler Team Though it would be great to improve the behaviour however, this is not a defect that would stop you from progressing in any way. It’s important to note however that VSP files generated by Visual Studio 2012 are not backward compatible so you should refrain from opening these files in Visual Studio 2010.

Read the article

Thread.Interrupt Is Evil

- by Alois Kraus

Recently I have found an interesting issue with Thread.Interrupt during application shutdown. Some application was crashing once a week and we had not really a clue what was the issue. Since it happened not very often it was left as is until we have got some memory dumps during the crash. A memory dump usually means WindDbg which I really like to use (I know I am one of the very few fans of it). After a quick analysis I did find that the main thread already had exited and the thread with the crash was stuck in a Monitor.Wait. Strange Indeed. Running the application a few thousand times under the debugger would potentially not have shown me what the reason was so I decided to what I call constructive debugging. I did create a simple Console application project and try to simulate the exact circumstances when the crash did happen from the information I have via memory dump and source code reading. The thread that was crashing was actually MS code from an old version of the Microsoft Caching Application Block. From reading the code I could conclude that the main thread did call the Dispose method on the CacheManger class which did call Thread.Interrupt on the cache scavenger thread which was just waiting for work to do. My first version of the repro looked like this static void Main(string[] args) { Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); } static void ThreadFunc() { while (true) { object value = Dequeue(); // block until unblocked or awaken via ThreadInterruptedException } } static object WaitObject = new object(); static object Dequeue() { object lret = "got value"; try { lock (WaitObject) { } } catch (ThreadInterruptedException) { Console.WriteLine("Got ThreadInterruptException"); lret = null; } return lret; } I do start a background thread and call Thread.Interrupt on it and then directly let the application terminate. The thread in the meantime does plenty of Monitor.Enter/Leave calls to simulate work on it. This first version did not crash. So I need to dig deeper. From the memory dump I did know that the finalizer thread was doing just some critical finalizers which were closing file handles. Ok lets add some long running finalizers to the sample. class FinalizableObject : CriticalFinalizerObject { ~FinalizableObject() { Console.WriteLine("Hi we are waiting to finalize now and block the finalizer thread for 5s."); Thread.Sleep(5000); } } class Program { static void Main(string[] args) { FinalizableObject fin = new FinalizableObject(); Thread t = new Thread(ThreadFunc) { IsBackground = true, Name = "Test Thread" }; t.Start(); Console.WriteLine("Interrupt Thread"); t.Interrupt(); GC.KeepAlive(fin); // prevent finalizing it too early // After leaving main the other thread is woken up via Thread.Abort // while we are finalizing. This causes a stackoverflow in the CLR ThreadAbortException handling at this time. } With this changed Main method and a blocking critical finalizer I did get my crash just like the real application. The funny thing is that this is actually a CLR bug. When the main method is left the CLR does suspend all threads except the finalizer thread and declares all objects as garbage. After the normal finalizers were called the critical finalizers are executed to e.g. free OS handles (usually). Remember that I did call Thread.Interrupt as one of the last methods in the Main method. The Interrupt method is actually asynchronous and does wake a thread up and throws a ThreadInterruptedException only once unlike Thread.Abort which does rethrow the exception when an exception handling clause is left. It seems that the CLR does not expect that a frozen thread does wake up again while the critical finalizers are executed. While trying to raise a ThreadInterrupedException the CLR goes down with an stack overflow. Ups not so nice. Why has this nobody noticed for years is my next question. As it turned out this error does only happen on the CLR for .NET 4.0 (x86 and x64). It does not show up in earlier or later versions of the CLR. I have reported this issue on connect here but so far it was not confirmed as a CLR bug. But I would be surprised if my console application was to blame for a stack overflow in my test thread in a Monitor.Wait call. What is the moral of this story? Thread.Abort is evil but Thread.Interrupt is too. It is so evil that even the CLR of .NET 4.0 contains a race condition during the CLR shutdown. When the CLR gurus can get it wrong the chances are high that you get it wrong too when you use this constructs. If you do not believe me see what Patrick Smacchia does blog about Thread.Abort and List.Sort. Not only the CLR creators can get it wrong. The BCL writers do sometimes have a hard time with correct exception handling as well. If you do tell me that you use Thread.Abort frequently and never had problems with it I do suspect that you do not have looked deep enough into your application to find such sporadic errors.

Read the article

Is Data Science “Science”?

- by BuckWoody

I hold the term “science” in very high esteem. I grew up on the Space Coast in Florida, and eventually worked at the Kennedy Space Center, surrounded by very intelligent people who worked in various scientific fields. Recently a new term has entered the computing dialog – “Data Scientist”. Since it’s not a standard term, it has a lot of definitions, and in fact has been disputed as a correct term. After all, the reasoning goes, if there’s no such thing as “Data Science” then how can there be a Data Scientist? This argument has been made before, albeit with a different term – “Computer Science”. In Peter Denning’s excellent article “Is Computer Science Science” (April 2005/Vol. 48, No. 4 COMMUNICATIONS OF THE ACM) there are many points that separate “science” from “engineering” and even “art”. I won’t repeat the content of that article here (I recommend you read it on your own) but will leverage the points he makes there. Definition of Science To ask the question “is data science ‘science’” then we need to start with a definition of terms. Various references put the definition into the same basic areas: Study of the physical world Systematic and/or disciplined study of a subject area ...and then they include the things studied, the bodies of knowledge and so on. The word itself comes from Latin, and means merely “to know” or “to study to know”. Greek divides knowledge further into “truth” (episteme), and practical use or effects (tekhne). Normally computing falls into the second realm. Definition of Data Science And now a more controversial definition: Data Science. This term is so new and perhaps so niche that the major dictionaries haven’t yet picked it up (my OED reference is older – can’t afford to pop for the online registration at present). Researching the term's general use I created an amalgam of the definitions this way: “Studying and applying mathematical and other techniques to derive information from complex data sets.” Using this definition, data science certainly seems to be science - it's learning about and studying some object or area using systematic methods. But implicit within the definition is the word “application”, which makes the process more akin to engineering or even technology than science. In fact, I find that using these techniques – and data itself – part of science, not science itself. I leave out the concept of studying data patterns or algorithms as part of this discipline. That is actually a domain I see within research, mathematics or computer science. That of course is a type of science, but does not seek for practical applications. As part of the argument against calling it “Data Science”, some point to the scientific method of creating a hypothesis, testing with controls, testing results against the hypothesis, and documenting for repeatability. These are not steps that we often take in working with data. We normally start with a question, and fit patterns and algorithms to predict outcomes and find correlations. In this way Data Science is more akin to statistics (and in fact makes heavy use of them) in the process rather than starting with an assumption and following on with it. So, is Data Science “Science”? I’m uncertain – and I’m uncertain it matters. Even if we are facing rampant “title inflation” these days (does anyone introduce themselves as a secretary or supervisor anymore?) I can tolerate the term at least from the intent that we use data to study problems across a wide spectrum, rather than restricting it to a single domain. And I also understand those who have worked hard to achieve the very honorable title of “scientist” who have issues with those who borrow the term without asking. What do you think? Science, or not? Does it matter?

Read the article

EM CLI, diving in and beyond!

- by Maureen Byrne

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Doing more in less time… Isn’t that what we all strive to do? With this in mind, I put together two screen watches on Oracle Enterprise Manager 12c command line interface, or EM CLI as it is also known. There is a wealth of information on any topic that you choose to read about, from manual pages to coding documents…might I even say blog posts? In our busy lives it is so nice to just sit back with a short video, watch and learn enough to dive in. Doing more in less time, is the essence of EM CLI. It enables you to script fundamental and complex administrative tasks in an elegant way, thanks to the Jython scripting language. Repetitive tasks can be scripted and reused again and again. Sure, a Graphical User Interface provides a more intuitive step by step approach to tasks, and it provides a way of quickly becoming familiar with a product and its many features, and it is definitely the way to go when viewing performance data and historical trending…but for repetitive and complex tasks, scripting is the way to go! Lets us take the everyday task of creating an administrator. Using EM CLI in interactive mode the command could look like this.. emcli>create_user(name='jan.doe', type='EXTERNAL_USER') This command creates an administrator called jan.doe which is an externally authenticated user, possibly LDAP or SSO, defined by the EXTERNAL_USER tag. The create_user procedure takes many arguments; see the documentation for more information. Now, where EM CLI really shines and shows power is in creating multiple users. Regardless of the number, tens or thousands, the effort is the same. With the use of a standard programming construct, a loop, you can place your create_user() procedure within it. Using a loop allows you to iterate through a previously created list, creating new users until the list is complete. Using EM CLI in Script mode, your Jython loop would look something like this… for user in list_of_users: create_user(name=user, expire=’true’, password=’welcome123’) This Jython code snippet iterates through a previously defined list of names, list_of_users, and iterates through the list, taking each name, user in this case, and creates an administrator sets the password to welcome123, but forces the user to reset it when they first login. This is only one of over four hundred procedures created to expose Oracle Enterprise Manager 12c functionality in a powerful and programmatic way. It is a few months since we released EM CLI with scripting option. We are seeing many users adapt to this fun and powerful way of using Oracle Enterprise Manager 12c. What are the first steps? Watch these screen watches, and dive in. The first screen watch steps you through where and how to download and install and how to run your first few commands. The Second screen watch steps you through a few scripts. Next time, I am going to show you the basic building blocks to writing a Jython script to perform Oracle Enterprise Manager 12c administrative tasks. Join this growing group of EM CLI users…. Dive in! Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

On Reflector Pricing

- by Nick Harrison

I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

Read the article

#OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

- by Eric Bezille

For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key. None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

Read the article

7 Steps To Cut Recruiting Costs & Drive Exceptional Business Results

- by Oracle Accelerate for Midsize Companies

By Steve Viarengo, Vice President Product Management, Oracle Taleo Cloud Services Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In good times, trimming operational costs is an ongoing goal. In tough times, it’s a necessity. In both good times and bad, however, recruiting occurs. Growth increases headcount in good times, and opportunistic or replacement hiring occurs in slow business cycles. By employing creative recruiting strategies in tandem with the latest technology developments, you can reduce recruiting costs while driving exceptional business results. Here are some critical areas to focus on. 1. Target Direct Cost Savings Total recruiting process expenses are the sum of external costs plus internal labor costs. Most organizations can reduce recruiting expenses with direct cost savings. While additional savings on indirect costs can be realized from process improvement and efficiency gains, there are direct cost savings and benefits readily available in three broad areas: sourcing, assessments, and green recruiting. 2. Sourcing: Reduce Agency Costs Agency search firm fees can amount to 35 percent of a new employee’s annual base salary. Typically taken from the hiring department budget, these fees may not be visible to HR. By relying on internal mobility programs, referrals, candidate pipelines, and corporate career Websites, organizations can reduce or eliminate this agency spend. And when you do have to pay third-party agency fees, you can optimize the value you receive by collaborating with agencies to identify referred candidates, ensure access to candidate data and history, and receive automatic notifications and correspondence. 3. Sourcing: Reduce Advertising Costs You can realize significant cost reductions by placing all job positions on your corporate career Website. This will allow you to reap a substantial number of candidates at minimal cost compared to job boards and other sourcing options. 4. Sourcing: Internal Talent Pool Internal talent pools provide a way to reduce sourcing and advertising costs while delivering improved productivity and retention. Internal redeployment reduces costs and ramp-up time while increasing retention and employee satisfaction. 5. Sourcing: External Talent Pool Strategic recruiting requires identifying and matching people with a given set of skills to a particular job while efficiently allocating sourcing expenditures. By using an e-recruiting system (which drives external talent pool management) with a candidate relationship database, you can automate prescreening and candidate matching while communicating with targeted candidates. Candidate relationship management can lower sourcing costs by marketing new job opportunities to candidates sourced in the past. By mining the talent pool in this fashion, you eliminate the need to source a new pool of candidates for each new requisition. Managing and mining the corporate candidate database can reduce the sourcing cost per candidate by as much as 50 percent. 6. Assessments: Reduce Turnover Costs By taking advantage of assessments during the recruitment process, you can achieve a range of benefits, including better productivity, superior candidate performance, and lower turnover (providing considerable savings). Assessments also save recruiter and hiring manager time by focusing on a short list of qualified candidates. Hired for fit, such candidates tend to stay with the organization and produce quality work—ultimately driving revenue. 7. Green Recruiting: Reduce Paper and Processing Costs You can reduce recruiting costs by automating the process—and making it green. A paperless process informs candidates that you’re dedicated to green recruiting. It also leads to direct cost savings. E-recruiting reduces energy use and pollution associated with manufacturing, transporting, and recycling paper products. And process automation saves energy in mailing, storage, handling, filing, and reporting tasks. Direct cost savings come from reduced paperwork related to résumés, advertising, and onboarding. Improving the recruiting process through sourcing, assessments, and green recruiting not only saves costs. It also positions the company to improve the talent base during the recession while retaining the ability to grow appropriately in recovery. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

Read the article

My error with upgrading 4.0 to 4.2- What NOT to do...

- by Steve Tunstall

Last week, I was helping a client upgrade from the 2011.1.4.0 code to the newest 2011.1.4.2 code. We downloaded the 4.2 update from MOS, upload and unpacked it on both controllers, and upgraded one of the controllers in the cluster with no issues at all. As this was a brand-new system with no networking or pools made on it yet, there were not any resources to fail back and forth between the controllers. Each controller had it's own, private, management interface (igb0 and igb1) and that's it. So we took controller 1 as the passive controller and upgraded it first. The first controller came back up with no issues and was now on the 4.2 code. Great. We then did a takeover on controller 1, making it the active head (although there were no resources for it to take), and then proceeded to upgrade controller 2. Upon upgrading the second controller, we ran the health check with no issues. We then ran the update and it ran and rebooted normally. However, something strange then happened. It took longer than normal to come back up, and when it did, we got the "cluster controllers on different code" error message that one gets when the two controllers of a cluster are running different code. But we just upgraded the second controller to 4.2, so they should have been the same, right??? Going into the Maintenance-->System screen of controller 2, we saw something very strange. The "current version" was still on 4.0, and the 4.2 code was there but was in the "previous" state with the rollback icon, as if it was the OLDER code and not the newer code. I have never seen this happen before. I would have thought it was a bad 4.2 code file, but it worked just fine with controller 1, so I don't think that was it. Other than the fact the code did not update, there was nothing else going on with this system. It had no yellow lights, no errors in the Problems section, and no errors in any of the logs. It was just out of the box a few hours ago, and didn't even have a storage pool yet. So.... We deleted the 4.2 code, uploaded it from scratch, ran the health check, and ran the upgrade again. once again, it seemed to go great, rebooted, and came back up to the same issue, where it came to 4.0 instead of 4.2. See the picture below.... HERE IS WHERE I MADE A BIG MISTAKE.... I SHOULD have instantly called support and opened a Sev 2 ticket. They could have done a shared shell and gotten the correct Fishwork engineer to look at the files and the code and determine what file was messed up and fixed it. The system was up and working just fine, it was just on an older code version, not really a huge problem at all. Instead, I went ahead and clicked the "Rollback" icon, thinking that the system would rollback to the 4.2 code. Ouch... What happened was that the system said, "Fine, I will delete the 4.0 code and boot to your 4.2 code"... Which was stupid on my part because something was wrong with the 4.2 code file here and the 4.0 was just fine. So now the system could not boot at all, and the 4.0 code was completely missing from the system, and even a high-level Fishworks engineer could not help us. I had messed it up good. We could only get to the ILOM, and I had to re-image the system from scratch using a hard-to-get-and-use FishStick USB drive. These are tightly controlled and difficult to get, almost always handcuffed to an engineer who will drive out to re-image a system. This took another day of my client's time. So.... If you see a "previous version" of your system code which is actually a version higher than the current version... DO NOT ROLL IT BACK.... It did not upgrade for a very good reason. In my case, after the system was re-imaged to a code level just 3 back, we once again tried the same 4.2 code update and it worked perfectly the first time and is now great and stable. Lesson learned. By the way, our buddy Ryan Matthews wanted to point out the best practice and supported way of performing an upgrade of an active/active ZFSSA, where both controllers are doing some of the work. These steps would not have helpped me for the above issue, but it's important to follow the correct proceedure when doing an upgrade. 1) Upload software to both controllers and wait for it to unpack 2) On controller "A" navigate to configuration/cluster and click "takeover" 3) Wait for controller "B" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 4) Wait for controller "B" to apply the update and finish rebooting 5) Login to controller "B", navigate to configuration/cluster and click "takeover" 6) Wait for controller "A" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 7) Wait for controller "A" to apply the update and finish rebooting 8) Login to controller "B", navigate to configuration/cluster and click "failback"

Read the article

A Basic Thread

- by Joe Mayo

Most of the programs written are single-threaded, meaning that they run on the main execution thread. For various reasons such as performance, scalability, and/or responsiveness additional threads can be useful. .NET has extensive threading support, from the basic threads introduced in v1.0 to the Task Parallel Library (TPL) introduced in v4.0. To get started with threads, it's helpful to begin with the basics; starting a Thread. Why Do I Care? The scenario I'll use for needing to use a thread is writing to a file. Sometimes, writing to a file takes a while and you don't want your user interface to lock up until the file write is done. In other words, you want the application to be responsive to the user. How Would I Go About It? The solution is to launch a new thread that performs the file write, allowing the main thread to return to the user right away. Whenever the file writing thread completes, it will let the user know. In the meantime, the user is free to interact with the program for other tasks. The following examples demonstrate how to do this. Show Me the Code? The code we'll use to work with threads is in the System.Threading namespace, so you'll need the following using directive at the top of the file: using System.Threading; When you run code on a thread, the code is specified via a method. Here's the code that will execute on the thread: private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written."); } The call to Thread.Sleep(1000) delays thread execution. The parameter is specified in milliseconds, and 1000 means that this will cause the program to sleep for approximately 1 second. This method happens to be static, but that's just part of this example, which you'll see is launched from the static Main method. A thread could be instance or static. Notice that the method does not have parameters and does not have a return type. As you know, the way to refer to a method is via a delegate. There is a delegate named ThreadStart in System.Threading that refers to a method without parameters or return type, shown below: ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); I'll show you the whole program below, but the ThreadStart instance above goes in the Main method. The thread uses the ThreadStart instance, fileWriterHandlerDelegate, to specify the method to execute on the thread: Thread fileWriter = new Thread(fileWriterHandlerDelegate); As shown above, the argument type for the Thread constructor is the ThreadStart delegate type. The fileWriterHandlerDelegate argument is an instance of the ThreadStart delegate type. This creates an instance of a thread and what code will execute, but the new thread instance, fileWriter, isn't running yet. You have to explicitly start it, like this: fileWriter.Start(); Now, the code in the WriteFile method is executing on a separate thread. Meanwhile, the main thread that started the fileWriter thread continues on it's own. You have two threads running at the same time. Okay, I'm Starting to Get Glassy Eyed. How Does it All Fit Together? The example below is the whole program, pulling all the previous bits together. It's followed by its output and an explanation. using System; using System.Threading; namespace BasicThread { class Program { static void Main() { ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); Thread fileWriter = new Thread(fileWriterHandlerDelegate); Console.WriteLine("Starting FileWriter"); fileWriter.Start(); Console.WriteLine("Called FileWriter"); Console.ReadKey(); } private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written"); } } } And here's the output: Starting FileWriter Called FileWriter File Written So, Why are the Printouts Backwards? The output above corresponds to Console.Writeline statements in the program, with the second and third seemingly reversed. In a single-threaded program, "File Written" would print before "Called FileWriter". However, this is a multi-threaded (2 or more threads) program. In multi-threading, you can't make any assumptions about when a given thread will run. In this case, I added the Sleep statement to the WriteFile method to greatly increase the chances that the message from the main thread will print first. Without the Thread.Sleep, you could run this on a system with multiple cores and/or multiple processors and potentially get different results each time. Interesting Tangent but What Should I Get Out of All This? Going back to the main point, launching the WriteFile method on a separate thread made the program more responsive. The file writing logic ran for a while, but the main thread returned to the user, as demonstrated by the print out of "Called FileWriter". When the file write finished, it let the user know via another print statement. This was a very efficient use of CPU resources that made for a more pleasant user experience. Joe

Read the article

7-Eleven Improves the Digital Guest Experience With 10-Minute Application Provisioning

- by MichaelM-Oracle

By Vishal Mehra - Director, Cloud Computing, Oracle Consulting Making the Cloud Journey Matter There’s much more to cloud computing than cutting costs and closing data centers. In fact, cloud computing is fast becoming the engine for innovation and productivity in the digital age. Oracle Consulting Services contributes to our customers’ cloud journey by accelerating application provisioning and rapidly deploying enterprise solutions. By blending flexibility with standardization, our Middleware as a Service (MWaaS) offering is ensuring the success of many cloud initiatives. 10-Minute Application Provisioning Times at 7-Eleven As a case in point, 7-Eleven recently highlighted the scope, scale, and results of a cloud-powered environment. The world’s largest convenience store chain is rolling out a Digital Guest Experience (DGE) program across 8,500 stores in the U.S. and Canada. Everyday, 7-Eleven connects with tens of millions of customers through point-of-sale terminals, web sites, and mobile apps. Promoting customer loyalty, targeting promotions, downloading digital coupons, and accepting digital payments are all part of the roadmap for a comprehensive and rewarding customer experience. And what about the time required for deploying successive versions of this mission-critical solution? Ron Clanton, 7-Eleven's DGE Program Manager, Information Technology reported at Oracle Open World, " We are now able to provision new environments in less than 10 minutes. This includes the complete SOA Suite on Exalogic, and Enterprise Manager managing both the SOA Suite, Exalogic, and our Exadata databases ." OCS understands the complex nature of innovative solutions and has processes and expertise to help clients like 7-Eleven rapidly develop technology that enhances the customer experience with little more than the click of a button. OCS understood that the 7-Eleven roadmap required careful planning, agile development, and a cloud-capable environment to move fast and perform at enterprise scale. Business Agility Today’s business-savvy technology leaders face competing priorities as they confront the digital disruptions of the mobile revolution and next-generation enterprise applications. To support an innovation agenda, IT is required to balance competing priorities between development and operations groups. Standardization and consolidation of computing resources are the keys to success. With our operational and technical expertise promoting business agility, Oracle Consulting's deep Middleware as a Service experience can make a significant difference to our clients by empowering enterprise IT organizations with the computing environment they seek to keep up with the pace of change that digitally driven business units expect. Depending on the needs of the organization, this environment runs within a private, public, or hybrid cloud infrastructure. Through on-demand access to a shared pool of configurable computing resources, IT delivers the standard tools and methods for developing, integrating, deploying, and scaling next-generation applications. Gold profiles of predefined configurations eliminate the version mismatches among databases, application servers, and SOA suite components, delivered both by Oracle and other enterprise ISVs. These computing resources are well defined in business terms, enabling users to select what they need from a service catalog. Striking the Balance between Development and Operations As a result, development groups have the flexibility to choose among a menu of available services with descriptions of standard business functions, service level guarantees, and costs. Faced with the consumerization of enterprise IT, they can deliver the innovative customer experiences that seamlessly integrate with underlying enterprise applications and services. This cloud-powered development and testing environment accelerates release cycles to ensure agile development and rapid deployments. At the same time, the operations group is relying on certified stacks and frameworks, tuned to predefined environments and patterns. Operators can maintain a high level of security, and continue best practices for applications/systems monitoring and management. Moreover, faced with the challenges of delivering on service level agreements (SLAs) with the business units, operators can ensure performance, scalability, and reliability of the infrastructure. The elasticity of a cloud-computing environment – the ability to rapidly add virtual machines and storage in response to computing demands -- makes a difference for hardware utilization and efficiency. Contending with Continuous Change What does it take to succeed on the promise of the cloud? As the engine for innovation and productivity in the digital age, IT must face not only the technical transformations but also the organizational challenges of the cloud. Standardizing key technologies, resources, and services through cloud computing is only one part of the cloud journey. Managing relationships among multiple department and projects over time – developing the management, governance, and monitoring capabilities within IT – is an often unmentioned but all too important second part. In fact, IT must have the organizational agility to contend with continuous change. This is where a skilled consulting services partner can play a pivotal role as a trusted advisor in the successful adoption of cloud solutions. With a lifecycle services approach to delivering innovative business solutions, Oracle Consulting Services has expertise and a portfolio of services to help enterprise customers succeed on their cloud journeys as well as other converging mega trends .

Read the article

Atheros AR2413 wireless not working after shutdown

- by Chandrasekhar

I am using a Ubuntu 11.04 on an Acer aspire 3680 laptop and my wifi is not working. I followed the below commands to install the madwifi driver: sudo su apt-get install subversion cd /usr/src svn checkout http://madwifi-project.org/svn/madwifi/trunk madwifi tar cfvz madwifi.tgz cd madwifi make && make install echo "blacklist ath5k" /etc/modprobe.d/blacklist.conf echo "ath_pci" /etc/modules modprobe ath_pci sudo reboot After installation I am facing the same problem. My wifi wont work after I shutdown. Infact it didn't work after suspend but I rectified that problem by the following commands: Command 1: sudo rmmod -f ath_pci sudo rfkill unblock all sudo modprobe ath_pci along with the command SUSPEND_MODULES=ath_pci added to the /etc/pm/config.d/madwifi directory. So if I suspend and then on my laptop the wifi loads well and doesn't create a problem. But if I shutdown my laptop the wifi never loads again and eachtime I have to run a Ubuntu 9.04 live CD to load it. I did try adding the Command 1 to the /etc/rc.local directory but still it doesn't work. So my question is: What should I do in order to make my wireless work without having to run a live CD of ubuntu 9.04 everytime after shutdown? Thanks. Here are the outputs which one might need: Output 1 chandru@chandru-acer:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 0a:03.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) 0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Output 2: lsmod Module Size Used by wlan_tkip 17074 2 binfmt_misc 13213 1 parport_pc 32111 0 ppdev 12849 0 snd_hda_codec_si3054 12924 1 snd_hda_codec_realtek 255882 1 joydev 17322 0 snd_atiixp_modem 18624 0 snd_via82xx_modem 18305 0 snd_intel8x0m 18493 0 snd_ac97_codec 105614 3 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m snd_hda_intel 24113 2 ac97_bus 12642 1 snd_ac97_codec snd_hda_codec 90901 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel i915 451053 3 snd_hwdep 13274 1 snd_hda_codec snd_pcm 80042 7 snd_hda_codec_si3054,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25269 1 snd_seq_midi drm_kms_helper 40971 1 i915 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event pcmcia 39671 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq drm 184164 4 i915,drm_kms_helper yenta_socket 27230 0 tifm_7xx1 12898 0 wlan_scan_sta 21945 1 ath_rate_sample 17279 1 pcmcia_rsrc 18292 1 yenta_socket psmouse 73312 0 tifm_core 15040 1 tifm_7xx1 snd 55295 18 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device serio_raw 12990 0 i2c_algo_bit 13184 1 i915 soundcore 12600 1 snd pcmcia_core 21505 3 pcmcia,yenta_socket,pcmcia_rsrc video 19112 1 i915 ath_pci 183044 0 snd_page_alloc 14073 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_hda_intel,snd_pcm wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci lp 13349 0 parport 36746 3 parport_pc,ppdev,lp usbhid 41704 0 hid 77084 1 usbhid sky2 49172 0 Output 3 root@chandru-acer:~# lshw -C network PCI (sysfs) *-network description: Ethernet interface product: 88E8038 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 14 serial: 00:16:36:fb:aa:64 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.28 firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:44000000-44003fff ioport:2000(size=256) *-network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wifi0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci ip=192.168.1.6 latency=96 maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11g resources: irq:18 memory:d0000000-d000ffff Output 4 root@chandru-acer:~# lsmod | grep ath_pci ath_pci 183044 0 wlan 224640 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci ath_hal 398701 3 ath_rate_sample,ath_pci

Read the article

Sass interface in HTML6 for upload files.

- by Anirudha

Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/04/sass-interface-in-html6-for-upload-files.aspx[This post is about experiment & imagination] From Windows XP (ever last OS I tried) I have seen a feature that is about send file to pen drive and make shortcut on Desktop. In XP, Win7 (Win8 have this too, not removed) just select the file right click > send to and you can send this file to many places. In my menu it’s show me Skype because I have installed it. this skype confirm that we can add our own app here to make it more easy for user to send file in our app. Nowadays Many people use Cloud or online site to store the file. In case of html5 drag and drop you need to have site opened and have opened that page which is about file upload. You need to select all and drag and drop. after drag and drop file is simply uploaded to server and site show you on list (if no error happen). but this file upload is seriously not worthy since I have to open the site when I do this operation. Through this post I want to describe a feature that can make this thing better. This API is simply called SASS FILE UPLOAD API Through This API when you surf the site and come into file upload page then the page will tell you that we also have SASS FILE API support. Enable it for better result. How this work This API feature are activated on 2 basis. 1. Feature are disabled by default on site (or you can change it if it’s not) 2. This API allow specific site to upload the files. Files upload may have some rule. For example (minimum or maximum size of file to uploaded, which format the site allowed you to upload). In case of resume site you will be allowed to use .doc (according to code of site) How browser recognize that Site have SASS service. In HTML source of the site, the code have a meta tag similar to this <meta name=”sass-upload-api” path=”/upload.json”/> Remember that upload.json is one file that has define the value of many settings { "cookie_name": "ck_file", "maximum_allowed_perday": 24, "allowed_file_extensions","*.png,*.jpg,*.jpeg,*.gif", "method": [ { "get": "file/get", "routing":"/file/get/{fileName}" }, { "post": "file/post", "routing":"/file/post/{fileName}" }, { "delete": "file/delete", "routing":"/file/delete/{fileName}" }, { "put": "file/put", "routing":"/file/put/{fileName}" }, { "all": "file/all", "routing":"/file/all/{fileName}" } ] } cookie name is simply a cookie which should be stored in browser and define in json. we define the cookie_name so we can easily share then with service in Windows system. This cookie will be accessible with the service so it’s security based safe. other cookie will not be shared. The cookie will be post,put, get from this location. The all location will be simply about showing a whole list of file. This will gave a treeview kind of json to show the directories on sever. for example example.com if you have activated the API with this site then you will seen a send to option in your explorer.exe when you send you will got a windows open which folder you want to use to send the file. The windows will also describe the limit and how much you can upload. This thing never required site to opened. When you upload the file this will be uploaded through FTP protocol. FTP protocol are better for performance. How this API make thing faster. Suppose you want to ask a question and want to post image. you just do it and get it ready when you open stackoverflow.com now stackoverflow will only tell you which file you want to put on your current question that you asking for. second use is about people use cloud app. There is no need of drag and drop anymore. we just need to do it without drag and drop it. we doesn’t need to open the site either. This thing is still in experiment level. I will update this post when I got some progress on this API.

Read the article

My Feelings About Microsoft Surface

- by Valter Minute

Advice: read the title carefully, I’m talking about “feelings” and not about advanced technical points proved in a scientific and objective way I still haven’t had a chance to play with a MS Surface tablet (I would love to, of course) and so my ideas just came from reading different articles on the net and MS official statements. Remember also that the MVP motto begins with “Independent” (“Independent Experts. Real World Answers.”) and this is just my humble opinion about a product and a technology. I know that, being an MS MVP you can be called an “MS-fanboy”, I don’t care, I hope that people can appreciate my opinion, even if it doesn’t match theirs. The “Surface” brand can be confusing for techies that knew the “original” surface concept but I think that will be a fresh new brand name for most of the people out there. But marketing department are here to confuse people… so I can understand this “recycle” of an existing name. So Microsoft is entering the hardware arena… for me this is good news. Microsoft developed some nice hardware in the past: the xbox, zune (even if the commercial success was quite limited) and, last but not least, the two arc mices (old and new model) that I use and appreciate. In the past Microsoft worked with OEMs and that model lead to good and bad things. Good thing (for microsoft, at least) is market domination by windows-based PCs that only in the last years has been reduced by the return of the Mac and tablets. Google is also moving in the hardware business with its acquisition of Motorola, and Apple leveraged his control of both the hardware and software sides to develop innovative products. Microsoft can scare OEMs and make them fly away from windows (but where?) or just lead the pack, showing how devices should be designed to compete in the market and bring back some of the innovation that disappeared from recent PC products (look at the shelves of your favorite electronics store and try to distinguish a laptop between the huge mass of anonymous PCs on displays… only Macs shine out there…). Having to compete with MS “official” hardware will force OEMs to develop better product and bring back some real competition in a market that was ruled only by prices (the lower the better even when that means low quality) and no innovative features at all (when it was the last time that a new PC surprised you?). Moving into a new market is a big and risky move, but with Windows 8 Microsoft is playing a crucial move for its future, trying to be back in the innovation run against apple and google. MS can’t afford to fail this time. I saw the new devices (the WinRT and Pro) and the specifications are scarce, misleading and confusing. The first impression is that the device looks like an iPad with a nice keyboard cover… Using “HD” and “full HD” to define display resolution instead of using the real figures and reviving the “ClearType” brand (now dead on Win8 as reported here and missed by people who hate to read text on displays, like myself) without providing clear figures (couldn’t you count those damned pixels?) seems to imply that MS was caught by surprise by apple recent “retina” displays that brought very high definition screens on tablets.Also there are no specifications about the processors used (even if some sources report NVidia Tegra for the ARM tablet and i5 for the x86 one) and expected battery life (a critical point for tablets and the point that killed Windows7 x86 based tablets). Also nothing about the price, and this will be another critical point because other platform out there already provide lots of applications and have a good user base, if MS want to enter this market tablets pricing must be competitive. There are some expansion ports (SD and USB), so no fixed storage model (even if the specs talks about 32-64GB for RT and 128-256GB for pro). I like this and don’t like the apple model where flash memory (that it’s dirt cheap used in thumdrives or SD cards) is as expensive as gold (or cocaine to have a more accurate per gram measurement) when mounted inside a tablet/phone. For big files you’ll be able to use external media and an SD card could be used to store files that don’t require super-fast SSD-like access times, I hope. To be honest I really don’t like the marketplace model and the limitation of Windows RT APIs (no local database? from a company that based a good share of its success on VB6+Access!) and lack of desktop support on the ARM (even if the support is here and has been used to port office). It’s a step toward the consumer market (where competitors are making big money), but may impact enterprise (and embedded) users that may not appreciate Windows 8 new UI or the limitations of the new app model (if you aren’t connected you are dead ). Not having compatibility with the desktop will require brand new applications and honestly made all the CPU cycles spent to convert .NET IL into real machine code in the past like a huge waste of time… as soon as a new processor architecture is supported by Windows you still have to rewrite part of your application (and MS is pushing HTML5+JS and native code more than .NET in my perception). On the other side I believe that the development experience provided by Visual Studio is still miles (or kilometres) ahead of the competition and even the all-uppercase menu of VS2012 hasn’t changed this situation. The new metro UI got mixed reviews. On my side I should say that is very pleasant to use on a touch screen, I like the minimalist design (even if sometimes is too minimal and hides stuff that, in my opinion, should be visible) but I should also say that using it with mouse and keyboard is like trying to pick your nose with boxing gloves… Metro is also very interesting for embedded devices where touch screen usage is quite common and where having an application taking all the screen is the norm. For devices like kiosks, vending machines etc. this kind of UI can be a great selling point. I don’t need a new tablet (to be honest I’m pretty happy with my wife’s iPad and with my PC), but I may change my opinion after having a chance to play a little bit with those new devices and understand what’s hidden under all this mysterious and generic announcements and specifications!

Read the article

What's My Problem? What's Your Problem?

- by Jacek Ziabicki

Software installers are not made for building demo environments. I can say this much after 12 years (on and off) of supporting my fellow sales consultants with environments for software demonstrations. When we release software, we include installation programs and procedures that are designed for use by our clients – to build a production environment and a limited number of testing, training and development environments. Different Objectives Your priorities when building an environment for client use vs. building a demo environment are very different. In a production environment, security, stability, and performance concerns are paramount. These environments are built on a specific server and rarely, if ever, moved to a different server or different network address. There is typically just one application running on a particular server (physical or virtual). Once built, the environment will be used for months or years at a time. Because of security considerations, the installation program wants to make these environments very specific to the organization using the software and the use case, encoding a fully qualified name of the server, or even the IP address on the network, in the configuration. So you either go through the installation procedure for each environment, or learn how to clone and reconfigure the software as a separate instance to build all your non-production environments. This may not matter much if the installation is as simple as clicking on the Setup program. But for enterprise applications, you have a number of configuration settings that you need to get just right – so whether you are installing from scratch or reconfiguring an existing installation, this requires both time and expertise in the particular piece of software. If you need a setup of several applications that are integrated to talk to one another, it is a whole new level of complexity. Now you need the expertise in all of the applications involved (plus the supporting technology products), and in addition to making each application work, you also have to configure the integration endpoints. Each application needs the URLs and credentials to call the integration layer, and the integration must be able to call each application. Then you have to make sure that each app has the right data so a business process initiated in one application can continue in the next. And, you will need to check that each application has the correct version and patch level for the integration to work. When building demo environments, your #1 concern is agility. If you can get away with a small number of long-running environments, you are lucky. More likely, you may get a request for a dedicated environment for a demonstration that is two weeks away: how quickly can you make this available so we still have the time to build the client-specific data? We are running a hands-on workshop next month, and we’ll need 15 instances of application X environment so each student can have a separate server for the exercises. We cannot connect to our data center from the client site, the client’s security policy won’t allow our VPN to go through – so we need a portable environment that we can bring with us. Our consultants need to be able to work at the hotel, airport, and the airplane, so we really want an environment that can run on a laptop. The client will need two playpen environments running in the cloud, accessible from their network, for a series of workshops that start two weeks from now. We have seen all of these scenarios and more. Here you would be much better served by a generic installation that would be easy to clone. Welcome to the Wonder Machine The reason I started this blog is to share a particular design of a demo environment, a special way to install software, that can address the above requirements, even for integrated setups. This design was created by a team at Oracle Utilities Global Business Unit, and we are using this setup for most of our demo environments. In a bout of modesty we called it the Wonder Machine. Over the next few posts – think of it as a novel in parts – I will tell you about the big idea, how it was implemented and what you can do with it. After we have laid down the groundwork, I would like to share some tips and tricks for users of our Wonder Machine implementation, as well as things I am learning about building portable, cloneable environments. The Wonder Machine is by no means a closed specification, it is under active development! I am hoping this blog will be of interest to two groups of readers – the users of the Wonder Machine we have built at Oracle Utilities, who want to get the most out of their demo environments and be able to reconfigure it to their needs – and to people who need to build environments for demonstration, testing, training, development and would like to make them cloneable and portable to maximize the reuse of their effort. Surely we are not the only ones facing this problem? If you can think of a better way to solve it, or if you can help us improve on our concept, I will appreciate your comments!

Read the article

SQL Server - Rebuilding Indexes

- by Renso

Goal: Rebuild indexes in SQL server. This can be done one at a time or with the example script below to rebuild all index for a specified table or for all tables in a given database. Why? The data in indexes gets fragmented over time. That means that as the index grows, the newly added rows to the index are physically stored in other sections of the allocated database storage space. Kind of like when you load your Christmas shopping into the trunk of your car and it is full you continue to load some on the back seat, in the same way some storage buffer is created for your index but once that runs out the data is then stored in other storage space and your data in your index is no longer stored in contiguous physical pages. To access the index the database manager has to "string together" disparate fragments to create the full-index and create one contiguous set of pages for that index. Defragmentation fixes that. What does the fragmentation affect?Depending of course on how large the table is and how fragmented the data is, can cause SQL Server to perform unnecessary data reads, slowing down SQL Server’s performance.Which index to rebuild?As a rule consider that when reorganize a table's clustered index, all other non-clustered indexes on that same table will automatically be rebuilt. A table can only have one clustered index.How to rebuild all the index for one table:The DBCC DBREINDEX command will not automatically rebuild all of the indexes on a given table in a databaseHow to rebuild all indexes for all tables in a given database:USE [myDB] -- enter your database name hereDECLARE @tableName varchar(255)DECLARE TableCursor CURSOR FORSELECT table_name FROM information_schema.tablesWHERE table_type = 'base table'OPEN TableCursorFETCH NEXT FROM TableCursor INTO @tableNameWHILE @@FETCH_STATUS = 0BEGINDBCC DBREINDEX(@tableName,' ',90) --a fill factor of 90%FETCH NEXT FROM TableCursor INTO @tableNameENDCLOSE TableCursorDEALLOCATE TableCursorWhat does this script do?Reindexes all indexes in all tables of the given database. Each index is filled with a fill factor of 90%. While the command DBCC DBREINDEX runs and rebuilds the indexes, that the table becomes unavailable for use by your users temporarily until the rebuild has completed, so don't do this during production hours as it will create a shared lock on the tables, although it will allow for read-only uncommitted data reads; i.e.e SELECT.What is the fill factor?Is the percentage of space on each index page for storing data when the index is created or rebuilt. It replaces the fill factor when the index was created, becoming the new default for the index and for any other nonclustered indexes rebuilt because a clustered index is rebuilt. When fillfactor is 0, DBCC DBREINDEX uses the fill factor value last specified for the index. This value is stored in the sys.indexes catalog view. If fillfactor is specified, table_name and index_name must be specified. If fillfactor is not specified, the default fill factor, 100, is used.How do I determine the level of fragmentation?Run the DBCC SHOWCONTIG command. However this requires you to specify the ID of both the table and index being. To make it a lot easier by only requiring you to specify the table name and/or index you can run this script:DECLARE@ID int,@IndexID int,@IndexName varchar(128)--Specify the table and index namesSELECT @IndexName = ‘index_name’ --name of the indexSET @ID = OBJECT_ID(‘table_name’) -- name of the tableSELECT @IndexID = IndIDFROM sysindexesWHERE id = @ID AND name = @IndexName--Show the level of fragmentationDBCC SHOWCONTIG (@id, @IndexID)Here is an example:DBCC SHOWCONTIG scanning 'Tickets' table...Table: 'Tickets' (1829581556); index ID: 1, database ID: 13TABLE level scan performed.- Pages Scanned................................: 915- Extents Scanned..............................: 119- Extent Switches..............................: 281- Avg. Pages per Extent........................: 7.7- Scan Density [Best Count:Actual Count].......: 40.78% [115:282]- Logical Scan Fragmentation ..................: 16.28%- Extent Scan Fragmentation ...................: 99.16%- Avg. Bytes Free per Page.....................: 2457.0- Avg. Page Density (full).....................: 69.64%DBCC execution completed. If DBCC printed error messages, contact your system administrator.What's important here?The Scan Density; Ideally it should be 100%. As time goes by it drops as fragmentation occurs. When the level drops below 75%, you should consider re-indexing.Here are the results of the same table and clustered index after running the script:DBCC SHOWCONTIG scanning 'Tickets' table...Table: 'Tickets' (1829581556); index ID: 1, database ID: 13TABLE level scan performed.- Pages Scanned................................: 692- Extents Scanned..............................: 87- Extent Switches..............................: 86- Avg. Pages per Extent........................: 8.0- Scan Density [Best Count:Actual Count].......: 100.00% [87:87]- Logical Scan Fragmentation ..................: 0.00%- Extent Scan Fragmentation ...................: 22.99%- Avg. Bytes Free per Page.....................: 639.8- Avg. Page Density (full).....................: 92.10%DBCC execution completed. If DBCC printed error messages, contact your system administrator.What's different?The Scan Density has increased from 40.78% to 100%; no fragmentation on the clustered index. Note that since we rebuilt the clustered index, all other index were also rebuilt.

Read the article

Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

- by Charles Lamb

We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards. Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM. There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

Read the article

JavaDay Taipei 2014 Trip Report

- by reza_rahman

JavaDay Taipei 2014 was held at the Taipei International Convention Center on August 1st. Organized by Oracle University, it is one of the largest Java developer events in Taiwan. This was another successful year for JavaDay Taipei with a fully sold out venue packed with youthful, energetic developers (this was my second time at the event and I have already been invited to speak again next year!). In addition to Oracle speakers like me, Steve Chin and Naveen Asrani, the event also featured a bevy of local speakers including Taipei Java community leaders. Topics included Java SE, Java EE, JavaFX, cloud and Big Data. It was my pleasure and privilege to present one of the opening keynotes for the event. I presented my session on Java EE titled "JavaEE.Next(): Java EE 7, 8, and Beyond". I covered the changes in Java EE 7 as well as what's coming in Java EE 8. I demoed the Cargo Tracker Java EE BluePrints. I also briefly talked about Adopt-a-JSR for Java EE 8. The slides for the keynote are below (click here to download and view the actual PDF): It appears your Web browser is not configured to display PDF files. No worries, just click here to download the PDF file. In the afternoon I did my JavaScript + Java EE 7 talk titled "Using JavaScript/HTML5 Rich Clients with Java EE 7". This talk is basically about aligning EE 7 with the emerging JavaScript ecosystem (specifically AngularJS). The talk was completely packed. The slide deck for the talk is here: JavaScript/HTML5 Rich Clients Using Java EE 7 from Reza Rahman The demo application code is posted on GitHub. The code should be a helpful resource if this development model is something that interests you. Do let me know if you need help with it but the instructions should be fairly self-explanatory. I am delivering this material at JavaOne 2014 as a two-hour tutorial. This should give me a little more bandwidth to dig a little deeper, especially on the JavaScript end. I finished off Java Day Taipei with my talk titled "Using NoSQL with ~JPA, EclipseLink and Java EE" (this was the last session of the conference). The talk covers an interesting gap that there is surprisingly little material on out there. The talk has three parts -- a birds-eye view of the NoSQL landscape, how to use NoSQL via a JPA centric facade using EclipseLink NoSQL, Hibernate OGM, DataNucleus, Kundera, Easy-Cassandra, etc and how to use NoSQL native APIs in Java EE via CDI. The slides for the talk are here: Using NoSQL with ~JPA, EclipseLink and Java EE from Reza Rahman The JPA based demo is available here, while the CDI based demo is available here. Both demos use MongoDB as the data store. Do let me know if you need help getting the demos up and running. After the event the Oracle University folks hosted a reception in the evening which was very well attended by organizers, speakers and local Java community leaders. I am extremely saddened by the fact that this otherwise excellent trip was scarred by terrible tragedy. After the conference I joined a few folks for a hike on the Maokong Mountain on Saturday. The group included friends in the Taiwanese Java community including Ian and Robbie Cheng. Without warning, fatal tragedy struck on a remote part of the trail. Despite best efforts by us, the excellent Taiwanese Emergency Rescue Team and World class Taiwanese physicians we were unable to save our friend Robbie Cheng's life. Robbie was just thirty-four years old and is survived by his younger brother, mother and father. Being the father of a young child myself, I can only imagine the deep sorrow that this senseless loss unleashes. Robbie was a key member of the Taiwanese Java community and a Java Evangelist at Sun at one point. Ironically the only picture I was able to take of the trail was mere moments before tragedy. I thought I should place him in that picture in profoundly respectful memoriam: Perhaps there is some solace in the fact that there is something inherently honorable in living a bright life, dying young and meeting one's end on a beautiful remote mountain trail few venture to behold let alone attempt to ascend in a long and tired lifetime. Perhaps I'd even say it's a fate I would not entirely regret facing if it were my own. With that thought in mind it seems appropriate to me to quote some lyrics from the song "Runes to My Memory" by legendary Swedish heavy metal band Amon Amarth idealizing a fallen Viking warrior cut down in his prime: "Here I lie on wet sand I will not make it home I clench my sword in my hand Say farewell to those I love When I am dead Lay me in a mound Place my weapons by my side For the journey to Hall up high When I am dead Lay me in a mound Raise a stone for all to see Runes carved to my memory" I submit my deepest condolences to Robbie's family and hope my next trip to Taiwan ends in a less somber note.

Read the article

Vendors: Partners or Salespeople?

- by BuckWoody

I got a great e-mail from a friend that asked about how he could foster a better relationship with his vendors. So many times when you work with a vendor it’s more of a used-car sales experience than a partnership – but you can actually make your vendor more of a partner, as long as you both set some ground-rules at the start. Sit down with your vendor, and have a heart-to-heart talk with them, explain that they won’t win every time, but that you’re willing to work with them in an honest way on both sides. Here’s the advice I sent him verbatim. I hope this post generates lots of comments from both customers and vendors. I don’t expect that you’ve had a great experience with your Microsoft reps, but I happen to work with some of the best sales teams in the business, and our clients tell us that all the time. “The key to this relationship is to keep the audience really small. Ideally there should be one person from your side that is responsible for the relationship, and one from the vendor’s side. Each responsible person should have the authority to make decisions, and to bring in other folks as needed for a given topic, project or decision. For Microsoft, this is called an “Account Manager” – they aren’t technical, they aren’t sales. They “own” a relationship with a company. They learn what the company does, who does it, and how. They are responsible to understand what the challenges in your company are. While they don’t know the bits and bytes of everything we sell, they know what each thing does, and who to talk to about it. I get a call from an Account Manager every week that has pre-digested an issue at an organization and says to me: “I need you to set up an architectural meeting with their technical staff to get a better read on how we can help with problem X.” I do that and then report back to the Account Manager what we learned. All through this process there’s the atmosphere of a “team”, not a “sales opportunity” per se. I’ve even recommended that the firm use a rival product, and I’ve never gotten push-back on that decision from my Account Managers. But that brings up an interesting point. Someone pays an Account Manager and pays me. They expect something in return. At some point, you have to buy something. Not every time, not every situation – sometimes it’s just helping you with what you already bought from us. But the point is that you can’t expect lots of love and never spend any money. That’s the way business works. Finally, don’t view the vendor as someone with their hand in your pocket – somebody that’s just trying to sell you something and doesn’t care if they ever see you again – unless they deserve it. There are plenty of “love them and leave them” companies out there, and you may have even had this experience with us, but that isn’t the case in the firms I work with. In fact, my customers get a questionnaire that asks them that exact question. “How many times have you seen your account team? Did you like your interaction with them? Can they do better?” My raises, performance reviews and general standing in my group are based on the answers the company gives. Ask your vendor if they measure their sales and support teams this way – if not, seek another vendor to partner with. Partnering with someone is a big deal. It involves time and effort on your part, and on the vendor’s part. If either of you isn’t pulling your weight, it just won’t work. You have every right to expect them to treat you as a partner, and they have the same right for your side.” Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Optimizing a thread safe Java NIO / Serialization / FIFO Queue [migrated]

- by trialcodr

I've written a thread safe, persistent FIFO for Serializable items. The reason for reinventing the wheel is that we simply can't afford any third party dependencies in this project and want to keep this really simple. The problem is it isn't fast enough. Most of it is undoubtedly due to reading and writing directly to disk but I think we should be able to squeeze a bit more out of it anyway. Any ideas on how to improve the performance of the 'take'- and 'add'-methods? /** * <code>DiskQueue</code> Persistent, thread safe FIFO queue for * <code>Serializable</code> items. */ public class DiskQueue<ItemT extends Serializable> { public static final int EMPTY_OFFS = -1; public static final int LONG_SIZE = 8; public static final int HEADER_SIZE = LONG_SIZE * 2; private InputStream inputStream; private OutputStream outputStream; private RandomAccessFile file; private FileChannel channel; private long offs = EMPTY_OFFS; private long size = 0; public DiskQueue(String filename) { try { boolean fileExists = new File(filename).exists(); file = new RandomAccessFile(filename, "rwd"); if (fileExists) { size = file.readLong(); offs = file.readLong(); } else { file.writeLong(size); file.writeLong(offs); } } catch (FileNotFoundException e) { throw new RuntimeException(e); } catch (IOException e) { throw new RuntimeException(e); } channel = file.getChannel(); inputStream = Channels.newInputStream(channel); outputStream = Channels.newOutputStream(channel); } /** * Add item to end of queue. */ public void add(ItemT item) { try { synchronized (this) { channel.position(channel.size()); ObjectOutputStream s = new ObjectOutputStream(outputStream); s.writeObject(item); s.flush(); size++; file.seek(0); file.writeLong(size); if (offs == EMPTY_OFFS) { offs = HEADER_SIZE; file.writeLong(offs); } notify(); } } catch (IOException e) { throw new RuntimeException(e); } } /** * Clears overhead by moving the remaining items up and shortening the file. */ public synchronized void defrag() { if (offs > HEADER_SIZE && size > 0) { try { long totalBytes = channel.size() - offs; ByteBuffer buffer = ByteBuffer.allocateDirect((int) totalBytes); channel.position(offs); for (int bytes = 0; bytes < totalBytes;) { int res = channel.read(buffer); if (res == -1) { throw new IOException("Failed to read data into buffer"); } bytes += res; } channel.position(HEADER_SIZE); buffer.flip(); for (int bytes = 0; bytes < totalBytes;) { int res = channel.write(buffer); if (res == -1) { throw new IOException("Failed to write buffer to file"); } bytes += res; } offs = HEADER_SIZE; file.seek(LONG_SIZE); file.writeLong(offs); file.setLength(HEADER_SIZE + totalBytes); } catch (IOException e) { throw new RuntimeException(e); } } } /** * Returns the queue overhead in bytes. */ public synchronized long overhead() { return (offs == EMPTY_OFFS) ? 0 : offs - HEADER_SIZE; } /** * Returns the first item in the queue, blocks if queue is empty. */ public ItemT peek() throws InterruptedException { block(); synchronized (this) { if (offs != EMPTY_OFFS) { return readItem(); } } return peek(); } /** * Returns the number of remaining items in queue. */ public synchronized long size() { return size; } /** * Removes and returns the first item in the queue, blocks if queue is empty. */ public ItemT take() throws InterruptedException { block(); try { synchronized (this) { if (offs != EMPTY_OFFS) { ItemT result = readItem(); size--; offs = channel.position(); file.seek(0); if (offs == channel.size()) { truncate(); } file.writeLong(size); file.writeLong(offs); return result; } } return take(); } catch (IOException e) { throw new RuntimeException(e); } } /** * Throw away all items and reset the file. */ public synchronized void truncate() { try { offs = EMPTY_OFFS; file.setLength(HEADER_SIZE); size = 0; } catch (IOException e) { throw new RuntimeException(e); } } /** * Block until an item is available. */ protected void block() throws InterruptedException { while (offs == EMPTY_OFFS) { try { synchronized (this) { wait(); file.seek(LONG_SIZE); offs = file.readLong(); } } catch (IOException e) { throw new RuntimeException(e); } } } /** * Read and return item. */ @SuppressWarnings("unchecked") protected ItemT readItem() { try { channel.position(offs); return (ItemT) new ObjectInputStream(inputStream).readObject(); } catch (ClassNotFoundException e) { throw new RuntimeException(e); } catch (IOException e) { throw new RuntimeException(e); } } }

Search Results

Search found 19055 results on 763 pages for 'high performance'.

Page 710/763 | < Previous Page | 706 707 708 709 710 711 712 713 714 715 716 717 | Next Page >

- by Nick Harrison

- by kellsey.ruppel

- by FelixWehmeyer

- by Dave Campbell

- by George Mamaladze

- by Tarun Arora

- by David Swanger

- by Alois Kraus

- by BuckWoody

- by Maureen Byrne

- by Nick Harrison

- by Eric Bezille

- by Oracle Accelerate for Midsize Companies

- by Steve Tunstall

- by Joe Mayo

- by MichaelM-Oracle

- by Chandrasekhar

- by Anirudha

- by Valter Minute

- by Jacek Ziabicki

- by Renso

- by Charles Lamb

- by reza_rahman

- by BuckWoody

- by trialcodr

< Previous Page | 706 707 708 709 710 711 712 713 714 715 716 717 | Next Page >