Search Results

Search found 22480 results on 900 pages for 'internet archive'.

Page 711/900 | < Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >

  • Network configuration problem

    - by Musti
    in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

    Read the article

  • Ethernet Connection Unavailable

    - by fabikw
    I'm running Ubuntu Server 12.04 on a laptop with an Intel NIC (driver e1000e). When I connect the ethernet port to the internet (college network, DHCP) it works out of the box. Now I'm trying to connect it to a networked USRP (if you want to know what it is). A friend of mine managed to do this in his laptop (running regular Ubuntu 12.04) just by setting up a new Wired connection in the Network Manager with appropriate addresses. However, when I do the same, no wired connections are available. The output of nmcli -p dev is =========================================== Status of devices =========================================== DEVICE TYPE STATE ------------------------------------------- wlan0 802-11-wireless connected eth0 802-3-ethernet unavailable but the cable is connected to the device and the device is powered up. Any idea how to solve this? UPDATE: After stopping the network-manager service, setting up the connection manually and starting the service again, it now detects the ethernet connection. However, the device still can't receive data and doesn't answer to pings. UPDATE 2: As suggested I tried using a cross over cable but the result is exactly the same. However, I found out that connecting the device to the dock (as opposed to directly to the laptop) works fine. I know that the ethernet port in the laptop works fine, because connecting to the network through it works. Is it possible that the port in the laptop doesn't support Gb Ethernet (because that's what the device requires) but the one in the dock does?

    Read the article

  • Connecting to localhost with smartphone: possible?

    - by Arturas Molcanovas
    I am currently developing a mobile PHP project on localhost (or, to be more precise, a locally hosted website reachable at http://azgoth/) on my desktop computer and wish to check out how the design looks on my phone's various browsers, however, since the project's actually in my computer rather than the public net, I am unable to do so. Both my Desktop computer and smartphone connect to the internet via the same router, so I wondered, would it be possible to somehow make http://azgoth/ accessible to my smartphone in a similar way that my desktop computer accesses it, without making it public for everyone to see? OS: Windows XP SP 3 Service: Apache HTTPD Router: D-Link DIR-300 FTP Directory

    Read the article

  • Windows XP screen chopped off

    - by msindle
    Ok this one has be confused as all get out! One of the teachers at the school I support has a dell latitude e5500 and the desktop shows about 3/4 just fine, but the right 1/4th shows whatever was on the last (like its not refreshing (yes I tried refreshing the screen)) For example if I open up internet explorer then minimize it the left 3/4ths minimizes, but the right 1/4th stays pulled up. Another interesting piece of information is that if I change it to God awful 800x600 it works perfectly fine. The sceen works together and has no problems.... The only way I have found to get rid of this is to reload the laptop and that is getting old quick! Thanks for your help! Msindle

    Read the article

  • Batch Convert .mkv to .mp4 with VLC

    - by IamHere
    i want to batch convert all .mkv file in a folder into .mp4 with vlc. it should use the original video-/audio-stream and if possible the .ass subtitle of the .mkv. so its not really a convert, its more changing the container. (my player cant read the mkv) if i do this conversion by hand (manually) it works, but i have a lot of mkv to convert, so it would take a lot of time. i have searched the internet for a batch file to do this and i found a few and tried to modify them to my wish, but all attempts i tried just created a .mp4 file that doesn't contain the audio-stream and the video-stream also cannot be rendered by all my mediaplayers on the pc. so i would be very thankful, if you could tell me how the batch have to look like, so it works with original video-/audio-stream (maybe .ass subtitle)

    Read the article

  • Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

    - by Andy
    I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

    Read the article

  • Partition Alignment Confusion

    - by user170757
    I have a new Samsung 840 250GB SSD on the way, and I want to make sure that everything is running optimally after install. I've spent many frustrating hours on the internet trying to understand how I should align the partitions of the SSD when it arrives (and even how to partition everything; my other drive is a 1TB HDD with files already on it). I'd like to know a foolproof way of setting everything up. Now, the only place I could find the erase block size of the 840 is here: http://thessdreview.com/Forums/ssd-beginners-guide-discussion/3630.htm I simply can't understand why such information isn't made freely accessible by manufacturers! But, anyway, this would suggest the EBS is 1536kb, which seems odd to me. It is to my understanding that you should now align by MiB (usually set at 1MiB). I assume that the figure above should actually be 1536k B=1.5MiB? This seems to suggest the partition alignment will be somewhat non-standard. So my question is: How do I align my partitions given this information? Please bear in mind that I have never used linux before; I'm doing my best to get everything set up so that I can begin to learn but am finding this process incredibly opaque and time consuming. If possible, a step by step guide through GParted would be great; at the moment I'm considering an NTFS partition ~20GB for Windows (playing games), an EXT4 ~20GB for ubuntu (for doing everything else) and a shared documents+games partition for everything else in NTFS file format. I'm not going to have any swap partition and use swap files instead.

    Read the article

  • How to setup dhcp3-server to advertise the DNS server the server itself has got from DHCP?

    - by Ivan
    The Ubuntu 10.04 server has eth0 Internet interface configured by means of an ISP's DHCP. At the same time the server has static eth0 LAN interface to which it provides masquerading (NAT) and LAN-internal DHCP service (dhcp3-server). As far as I've understood the manual, I had to hardcode DNS servers to advertise through LAN DHCP with option domain-name-servers in dhcpd.conf. But what if the ISP changes his DNS server IP silently (we use a SOHO-class ISP, so this won't surprise me much)? Can I configure dhcpd to advertise the DNS server the server uses itself, the one gotten by its DHCP client mechanism?

    Read the article

  • DNS Spoofing and Xampp as a proxy, how to configure it?

    - by Angelo
    I have a server running Apache with mod_proxy, a module to use my localhost as a proxy server. When somebody on the same LAN visits my server (my localhost through my lan ip), he/she can see only the .html page loaded into my server. Due to DNS Spoofing restrictions on the client, if he/she clicks on a link that refers to something not on my server, Apache says correctly "Object not found", because the client cannot request the page from the Internet (remember, the DNS is spoofed to my localhost). The question is: how to configure Apache to grab the page in place of the client?

    Read the article

  • Network? or router? problem

    - by Robert H Mercer
    I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

    Read the article

  • Comunication from Server to Client + Client LAN

    - by Filipe YaBa Polido
    I'm having some trouble with some network setup. I've tried OpenVPN, SocialVPN, Hamachi, still it is not working. This is my setup: Server A: NIC 1 with internet public address, NIC 2 to LAN Client B PC: NIC 1 (192.168.10.2) connects to router 192.168.10.1 Client B Device: 192.168.10.3 (Configured via software, can't do much here) Problem: Server A must connect to cliente device B. (I can install software needed at Client B PC). However... I can't change the router to some model with VPN like Draytek or Cisco :( OpenVPN fails at bridging, PC B can ping Server A, but Server A can't ping Device B, only PC B. What else can I do?!?!?

    Read the article

  • Dynamic to static internal IP address (Snow Leopard server)

    - by bac
    I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

    Read the article

  • Yum through http proxy

    - by eodchop
    Hello, I have several Fedora 13 servers that have to connect through an http proxy for yum updates. All port 80 traffic has to be routed through this proxy. I have setup the proxy server in the network settings GUI. I can browse the internet just fine. I have also setup my proxy information in /etc/yum.conf as follows: proxy=http:proxy.largecorp.corp/accelerated_pac_base.pac proxy_user=user proxy_password=password I then added the export HTTP_PROXY="http:proxy.largecorp.corp/accelerated_pac_base.pac" to /etc/bashrc and sourced the file. When i run yum update: Loaded plugins:presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) fro repository: fedora. Please verify its path and try again. All of the repo urls are the defaults, as this is a fresh install.

    Read the article

  • Desktop Fun: Mountains Theme Wallpapers

    - by Asian Angel
    Do you love to go on hikes in the mountains and enjoy the scenery? Bring those sweeping views and a touch of the great outdoors to your desktop with our Mountains Theme Wallpaper collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution.         For more fun wallpapers be certain to visit our new Desktop Fun section. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Forest Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online

    Read the article

  • Webpage / Other application does not fit fully on screen

    - by Frank Levebre
    I have an ASUS Eee PC 1008 HA The problem is that I have to move the cursor up/down in order to see the start control / icons at the bottom of the screen and the cursor up in order to see the menu bar / etc at the top of the screen, ie the whole page does not fit on the screen anymore. It has nothing to do with the zoom % in the bottom right hand corner. This also is the case whatever application I am running, ie Internet explorer , word, excel or whatever. Does anybody have an idea what is the problem and how I can resolve this?

    Read the article

  • hp laserjet 4200 madness

    - by C-dizzle
    I have an HP LaserJet 4200 printer that is acting really weird. I can print from internet just fine, no problem... but when I try to print from a document used in microsoft word, for example, I always get "Manual Feed Tray 1". I have racked my brain on this and cannot get it figured out. It's a networked printer and only an administrator account can make changes to it, I have also reset the printer back to factory settings, uninstalled and reinstalled onto the pc's and server it is connected to. Running out of hair since I'm pulling it all out... please help.

    Read the article

  • port forwarding using 3 static ip addresses

    - by Danny
    I am new to configuring routers. We have purchased a RV016 Cisco business router that has multiwan capability. What we are attempting to do is take map services from 3 different servers and assign 3 different static IP addresses and then forward port 80 through the router. A short term solution to building a proxy server. Is this possible? Right now we have a consumer grade Cisco router and assign a static IP and it works, we attempted the same settings on the business router and cannot get to the internet. We set it DHCP and it works fine, however we want to to forward the static ports not use DHCP.

    Read the article

  • Accessing non-port80 web server using IPv6

    - by logain
    In a normal IPv4 network, I can go into any browser such as Firefox and browse a server on a IPv4 address not hosted on port 80: (add http:// - Super user stops "new" users from adding links)192.168.42.6:8080/ This accesses the server on Port 8080 on 192.168.42.6. However, if I try this with a IPv6 IP, I get no luck. This tries to access port 8080 on fe80::520:ff0f:ece0:1 : http://[fe80::520:ff0f:ece0:1]:8080/ Firefox will automatically "fix" this URL to: http://[www.fe80::520:ff0f:ece0:1.com]:8080/ which does not help me access it at all. So either I am doing something really wrong OR there's something really wrong with IPv6. Couldn't find anything that even remotely helped on the Internet. (And yes, there is a server running on the IPv6 in question)

    Read the article

  • (Preferably) Encrypted Server Backups

    - by Shoaibi
    I have somehow managed to purchase a VPS after collecting money for sometime, now problem is i cant find a way to backup the server. My previous approach was: Got a webdav account from mydisk.se, mounted it on the vps, used duplicity and created encrypted backups. Problem is it was only 2G, and its running out of space, at my own place i dont have a stable internet connection else i have a 500G drive that i could surely use for backups. The vps has a 12G HD, and i would like to backup /home, /root, /etc, /var/ (specially log and www). Any ideas are welcomed. [EDIT] I am more of looking for resource of setting up a backup-point or such(i know how to setup a backup server, but i cant as i dont have stable connection or the money to buy another VPS/disk for backup) , i have already got the tools needed.

    Read the article

  • How do I share a PHP 5.4 server between OS X and VMWare?

    - by Ben
    I'm running PHP 5.4 on OS X which allows me to set up a virtual server for any directory, using this Terminal command: php -S localhost:8000 This will then set up http://localhost:8000 which works great, but what I would like to do is share this server with the instance of Windows that I have running through VMWare in order to test in Internet Explorer. I was wondering if this is possible and if it is, how do I go about setting it up? Currently trying to visit http://localhost:8000 gives me 'This page cannot be displayed'. I'd really appreciate any help that you can give me on this as I don't have much experience with virtual machines/networking. Thanks in advance.

    Read the article

  • Laptop loses signal from WiFi router, but mobile phone holds it fine

    - by Anton
    I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

    Read the article

  • Tunneling over HTTP

    - by Morgan
    Hello, I have a network at work that is locked behind a firewall and Internet connection is available only by using a proxy server. At work, I can connect to databases that are distributed across the network. However, at home, I cannot connect to the proxy server or the databases. How can this be done? I can access my workstation via LogMeIn, so I can install anything on it. I thought of installing some kind of tunneling mechanism in my workstation. Then, at home, I could connect to this mechanism, which would in turn do the required connections. So essentially, what I'd like to do can be represented by the following diagram: Home = Workstation = Database. For example, whenever I connect to, say, 10.140.0.1:1234 at home, this would be redirected to 10.140.0.1:1234 of my Workstation, because 10.140.0.1:1234 is only available through the corporate network. NOTE: I'm using Windows XP.

    Read the article

  • accessing files on a shared folder via IIS

    - by Darkcat Studios
    Im not sure if this suits stackexchange, serverfault or here... so i'll go with here for a start. I'm having issues setting up a network share to be accessed by IIS, all I need to do is read/write files on the Other server. We have 2 servers set up (Both 2008 R2 & IIS 7.5), one is the WEB server, which is externally accessible and NOT part of the domain. We also have an Intranet server which has no internet connectivity and is part of the domain. These 2 servers can talk to each other happily, I have the SQL server on the WEB server shared across to the intranet server so that the web content is editable from the intranet. I can share a folder on the web server (say, wwwroot/Images/) and connect to it from the intranet server, even have it as a mapped drive (but i know thats not going to work for IIS to access it), So there seems not to be a connectivity issue. I can also set up a Virtual folder in IIS on the Intranet server - this is where it gets annoying - I cant connect using pass-through authentication because there is no suitable user on the web server (which is not on the domain). If i set up a user on the web server, eg Intranet_USR, and give it appropriate rights to the folder, files and share, i can connect, but only view folder contents in IIS, not read, although that user has read privileges!! Any help much appreciated!

    Read the article

  • TV network capabilities.

    - by Narcolapser
    Question: Can the major TV producer's internet TV systems access network resource? Info: I'm looking for large TV's right now for my company to set up in conference rooms. We want the ability to load presentations with out having to have a computer to do so. Our hope is to put things on to network drives and access and display them from there. I've heard that LG's can do this if you convert the power point file in to a show format. that's fine. I just need to get this information to the TV with out the computer attached. Can anyone tell me if companies like LG, Vizio, Sony, Samsung, etc. have TV's that are capable of doing this? Thanks ~n

    Read the article

  • Acer Aspire 5542G overheating with ubuntu/kubuntu 12.04

    - by james
    I have an Acer Aspire 5542G laptop purchased couple of years ago. All these days, i used windows 7 on it . Then I tried ubuntu 12.04 . Everything was fine except the overheating issue. I updated ubuntu with all security fixes and available updates but nothing solved the problem. With idle use like internet browsing, the cpu fan speeds up a lot and i can feel very hot air coming from the vent (comparable to playing serious 3d game in windows). But it will not go to a point of freeze and shutdown. But as long as im using it, with no intensive tasks at all, the laptop stays too hot. This wasn't the case with windows7. In windows 7 the fan will not rotate at all with normal use. I heard there was manufacturing defect with some acer laptops, but i think it wasn't the case with my laptop since windows7 runs perfectly. I updated the bios to latest version. I cleaned dust in the vents. I tried kubuntu 12.04 up-to-date. Nothing solved the issue. My laptop specs are: CPU : AMD turion2 x2 M500 @ 2.2GHz GPU : AMD Mobility Radeon HD4570 3GB RAM and 320GB hard disk.

    Read the article

< Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >