Search Results

Search found 22447 results on 898 pages for 'cpu load'.

Page 713/898 | < Previous Page | 709 710 711 712 713 714 715 716 717 718 719 720  | Next Page >

• Munin not creating HTML files in Ubuntu Server 14.04

  - by lepe

  I have used munin in several servers and this is the first time is taking me so much time to set it up. When I telnet munin directly, I can list the services, there is no error at the logs and munin its being updated every 5 minutes. However no html files are created. I'm using the default location (/var/cache/munin/www) and I can confirm the permissions of that directory are set to munin.munin (IP and domain has been changed) munin.conf: dbdir /var/lib/munin htmldir /var/cache/munin/www logdir /var/log/munin rundir /var/run/munin [example.com;] address 100.100.50.200 munin-node.conf: log_level 4 log_file /var/log/munin/munin-node.log pid_file /var/run/munin/munin-node.pid background 1 setsid 1 user root group root host_name example.com allow ^127\.0\.0\.1$ allow ^100\.100\.50\.200$ allow ^::1$ /etc/hosts : 100.100.50.200 example.com 127.0.0.1 localhost $ telnet example.com 4949 Trying 100.100.50.200... Connected to example.com. Escape character is '^]'. # munin node at example.com list apache_accesses apache_processes apache_volume cpu cpuspeed df df_inode entropy fail2ban forks fw_packets if_err_eth0 if_err_eth1 if_eth0 if_eth1 interrupts ipmi_fans ipmi_power ipmi_temp irqstats load memory munin_stats mysql_bin_relay_log mysql_commands mysql_connections mysql_files_tables mysql_innodb_bpool mysql_innodb_bpool_act mysql_innodb_insert_buf mysql_innodb_io mysql_innodb_io_pend mysql_innodb_log mysql_innodb_rows mysql_innodb_semaphores mysql_innodb_tnx mysql_myisam_indexes mysql_network_traffic mysql_qcache mysql_qcache_mem mysql_replication mysql_select_types mysql_slow mysql_sorts mysql_table_locks mysql_tmp_tables ntp_2001:e40:100:208::123 ntp_91.189.94.4 ntp_kernel_err ntp_kernel_pll_freq ntp_kernel_pll_off ntp_offset ntp_states open_files open_inodes postfix_mailqueue postfix_mailvolume proc_pri processes swap threads uptime users vmstat fetch df _dev_sda3.value 2.1762874086869 _sys_fs_cgroup.value 0 _run.value 0.0503536980635825 _run_lock.value 0 _run_shm.value 0 _run_user.value 0 _dev_sda5.value 0.0176986285727571 _dev_sda8.value 1.08464646179852 _dev_sda7.value 0.0346633563514803 _dev_sda9.value 6.81031810822797 _dev_sda6.value 9.0932802215469 . /var/log/munin/munin-node.log Process Backgrounded 2014/08/16-14:13:36 Munin::Node::Server (type Net::Server::Fork) starting! pid(19610) Binding to TCP port 4949 on host 100.100.50.200 with IPv4 2014/08/16-14:23:11 CONNECT TCP Peer: "[100.100.50.200]:55949" Local: "[100.100.50.200]:4949" 2014/08/16-14:36:16 CONNECT TCP Peer: "[100.100.50.200]:56209" Local: "[100.100.50.200]:4949" /var/log/munin/munin-update.log ... 2014/08/16 14:30:01 [INFO]: Starting munin-update 2014/08/16 14:30:01 [INFO]: Munin-update finished (0.00 sec) 2014/08/16 14:35:02 [INFO]: Starting munin-update 2014/08/16 14:35:02 [INFO]: Munin-update finished (0.00 sec) 2014/08/16 14:40:01 [INFO]: Starting munin-update 2014/08/16 14:40:01 [INFO]: Munin-update finished (0.00 sec) $ ls -la /var/cache/munin/www/ drwxr-xr-x 3 munin munin 19 Aug 16 13:55 . drwxr-xr-x 3 root root 16 Aug 16 13:54 .. drwxr-xr-x 2 munin munin 4096 Aug 16 13:55 static Any ideas on why it is not working? EDIT This is how /var/log/munin/ log looks like after some days: -rw-r----- 1 www-data 0 Aug 16 13:54 munin-cgi-graph.log -rw-r----- 1 www-data 0 Aug 16 13:54 munin-cgi-html.log -rw-rw-r-- 1 munin 0 Aug 16 13:55 munin-html.log -rw-r----- 1 munin 0 Aug 19 06:18 munin-limits.log -rw-r----- 1 munin 15K Aug 18 14:10 munin-limits.log.1 -rw-r----- 1 munin 1.8K Aug 18 06:15 munin-limits.log.2.gz -rw-rw-r-- 1 munin 1.3K Aug 17 06:15 munin-limits.log.3.gz -rw-r--r-- 1 root 6.5K Aug 16 13:55 munin-node-configure.log -rw-r--r-- 1 root 0 Aug 17 06:18 munin-node.log -rw-r--r-- 1 root 420 Aug 16 14:52 munin-node.log.1.gz -rw-r----- 1 munin 0 Aug 19 06:18 munin-update.log -rw-r----- 1 munin 11K Aug 18 14:10 munin-update.log.1 -rw-r----- 1 munin 1.6K Aug 18 06:15 munin-update.log.2.gz -rw-rw-r-- 1 munin 1.5K Aug 17 06:15 munin-update.log.3.gz

  Read the article

• Nginx + PHP-FPM = "Random" 502 Bad Gateway

  - by david

  I am running Nginx and proxying php requests via FastCGI to PHP-FPM for processing. I will randomly receive 502 Bad Gateway error pages - I can reproduce this issue by clicking around my PHP websites very rapidly/refreshing a page for a minute or two. When I get the 502 error page all I have to do is refresh the browser and the page refreshes properly. Here is my setup: nginx/0.7.64 PHP 5.3.2 (fpm-fcgi) (built: Apr 1 2010 06:42:04) Ubuntu 9.10 (Latest 2.6 Paravirt) I compiled PHP-FPM using this ./configure directive ./configure --enable-fpm --sysconfdir=/etc/php5/conf.d --with-config-file-path=/etc/php5/conf.d/php.ini --with-zlib --with-openssl --enable-zip --enable-exif --enable-ftp --enable-mbstring --enable-mbregex --enable-soap --enable-sockets --disable-cgi --with-curl --with-curlwrappers --with-gd --with-mcrypt --enable-memcache --with-mhash --with-jpeg-dir=/usr/local/lib --with-mysql=/usr/bin/mysql --with-mysqli=/usr/bin/mysql_config --enable-pdo --with-pdo-mysql=/usr/bin/mysql --with-pdo-sqlite --with-pspell --with-snmp --with-sqlite --with-tidy --with-xmlrpc --with-xsl My php-fpm.conf looks like this (the relevant parts): ... <value name="pm"> <value name="max_children">3</value> ... <value name="request_terminate_timeout">60s</value> <value name="request_slowlog_timeout">30s</value> <value name="slowlog">/var/log/php-fpm.log.slow</value> <value name="rlimit_files">1024</value> <value name="rlimit_core">0</value> <value name="chroot"></value> <value name="chdir"></value> <value name="catch_workers_output">yes</value> <value name="max_requests">500</value> ... I've tried increasing the max_children to 10 and it makes no difference. I've also tried setting it to 'dynamic' and setting max_children to 50, and start_server to '5' without any difference. I have tried using both 1 and 5 nginx worker processes. My fastcgi_params conf looks like: fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200; Nginx logs the error as: [error] 3947#0: *10530 connect() failed (111: Connection refused) while connecting to upstream, client: 68.40.xxx.xxx, server: www.domain.com, request: "GET /favicon.ico HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "www.domain.com" PHP-FPM logs the follow at the time of the error: [NOTICE] pid 17161, fpm_unix_init_main(), line 255: getrlimit(nofile): max:1024, cur:1024 [NOTICE] pid 17161, fpm_event_init_main(), line 93: libevent: using epoll [NOTICE] pid 17161, fpm_init(), line 50: fpm is running, pid 17161 [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17162 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17163 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17164 started [NOTICE] pid 17161, fpm_event_loop(), line 111: ready to handle connections My CPU usage maxes out around 10-15% when I recreate the issue. My Free mem (free -m) is 130MB I had this intermittent 502 Bad Gateway issue when in was using php5-cgi to service my php requests as well. Does anyone know how to fix this?

  Read the article

• apache+mod_wsgi configuration for django project(s) on a quad core

  - by Stefano

  I've been experiment quite some time with a "typical" django setting upon nginx+apache2+mod_wsgi+memcached(+postgresql) (reading the doc and some questions on SO and SF, see comments) Since I'm still unsatisfied with the behavior (definitely because of some bad misconfiguration on my part) I would like to know what a good configuration would look like with these hypotesis: Quad-Core Xeon 2.8GHz 8 gigs memory several django projects (anything special related to this?) These are excerpts form my current confs: apache2 SetEnv VHOST null #WSGIPythonOptimize 2 <VirtualHost *:8082> ServerName subdomain.domain.com ServerAlias www.domain.com SetEnv VHOST subdomain.domain AddDefaultCharset UTF-8 ServerSignature Off LogFormat "%{X-Real-IP}i %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\"" custom ErrorLog /home/project1/var/logs/apache_error.log CustomLog /home/project1/var/logs/apache_access.log custom AllowEncodedSlashes On WSGIDaemonProcess subdomain.domain user=www-data group=www-data threads=25 WSGIScriptAlias / /home/project1/project/wsgi.py WSGIProcessGroup %{ENV:VHOST} </VirtualHost> wsgi.py import os import sys # setting all the right paths.... _realpath = os.path.realpath(os.path.dirname(__file__)) _public_html = os.path.normpath(os.path.join(_realpath, '../')) sys.path.append(_realpath) sys.path.append(os.path.normpath(os.path.join(_realpath, 'apps'))) sys.path.append(os.path.normpath(_public_html)) sys.path.append(os.path.normpath(os.path.join(_public_html, 'libs'))) sys.path.append(os.path.normpath(os.path.join(_public_html, 'django'))) os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi _application = django.core.handlers.wsgi.WSGIHandler() def application(environ, start_response): """ Launches django passing over some environment (domain name) settings """ application_group = environ['mod_wsgi.application_group'] """ wsgi application group is required. It's also used to generate the HOST.DOMAIN.TLD:PORT parameters to pass over """ assert application_group fields = application_group.replace('|', '').split(':') server_name = fields[0] os.environ['WSGI_APPLICATION_GROUP'] = application_group os.environ['WSGI_SERVER_NAME'] = server_name if len(fields) > 1 : os.environ['WSGI_PORT'] = fields[1] splitted = server_name.rsplit('.', 2) assert splitted >= 2 splited.reverse() if len(splitted) > 0 : os.environ['WSGI_TLD'] = splitted[0] if len(splitted) > 1 : os.environ['WSGI_DOMAIN'] = splitted[1] if len(splitted) > 2 : os.environ['WSGI_HOST'] = splitted[2] return _application(environ, start_response)` folder structure in case it matters (slightly shortened actually) /home/www-data/projectN/var/logs /project (contains manage.py, wsgi.py, settings.py) /project/apps (all the project ups are here) /django /libs Please forgive me in advance if I overlooked something obvious. My main question is about the apache2 wsgi settings. Are those fine? Is 25 threads an /ok/ number with a quad core for one only django project? Is it still ok with several django projects on different virtual hosts? Should I specify 'process'? Any other directive which I should add? Is there anything really bad in the wsgi.py file? I've been reading about potential issues with the standard wsgi.py file, should I switch to that? Or.. should this conf just be running fine, and I should look for issues somewhere else? So, what do I mean by "unsatisfied": well, I often get quite high CPU WAIT; but what is worse, is that relatively often apache2 gets stuck. It just does not answer anymore, and has to be restarted. I have setup a monit to take care of that, but it ain't a real solution. I have been wondering if it's an issue with the database access (postgresql) under heavy load, but even if it was, why would the apache2 processes get stuck? Beside these two issues, performance is overall great. I even tried New Relic and got very good average results.

  Read the article

• Apache2 will not start on OpenSUSE after enabling mod_pagespeed

  - by alpha1

  I have a linode VPS, running openSUSE 12.1 (A little outdated, but stable). I have installed the RPMS for mod_pagespeed. mod_pagespeed.conf has "ModPagespeed on". Restarting apache fails after enabling pagespeed. the errors are not very helpful. li361-39:/usr/lib64/apache2 # a2enmod pagespeed li361-39:/usr/lib64/apache2 # service apache2 restart redirecting to systemctl Job failed. See system logs and 'systemctl status' for details. li361-39:/usr/lib64/apache2 # systemctl status apache2.service apache2.service - apache Loaded: loaded (/lib/systemd/system/apache2.service; enabled) Active: failed since Thu, 06 Jun 2013 20:49:00 +0000; 1s ago Process: 6701 ExecStop=/usr/sbin/httpd2 -D SYSTEMD -k stop (code=exited, status=0/SUCCESS) Process: 6704 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -k start (code=exited, status=1/FAILURE) Main PID: 6637 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/apache2.service li361-39:/usr/lib64/apache2 # a2dismod pagespeed li361-39:/usr/lib64/apache2 # service apache2 restart redirecting to systemctl li361-39:/usr/lib64/apache2 # And the error log (/var/log/apache2/error_log) is useless as well. [Thu Jun 06 20:48:59 2013] [notice] caught SIGTERM, shutting down [Thu Jun 06 20:49:12 2013] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Thu Jun 06 20:49:13 2013] [notice] Apache/2.2.21 (Linux/SUSE) mod_ssl/2.2.21 OpenSSL/1.0.0k PHP/5.4.15 configured -- resuming normal operations EDIT This is from /var/log/messages Jun 12 14:24:14 li361-39 start_apache2[27951]: httpd2-prefork: Syntax error on line 116 of /etc/apache2/httpd.conf: Syntax error on line 34 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_pagespeed.so into server: /usr/lib64/apache2/mod_pagespeed.so: undefined symbol: ap_unixd_config Full Log is here: http://pastebin.com/hjnbZZTr I've tried looking for other logs and checking the mod_pagespeed.conf against posts claiming it works and nothing is striking as wrong. Any Ideas?

  Read the article

• How do I fix libdispatch problem crashing Mac OS X apps?

  - by david-ocallaghan

  In the last day I have started having a lot of brokenness on my Mac (MacBook Air running Mac OS X 10.6.2 with all software updates). Most noticably, iTunes no longer syncs with my iPhone. It fails with a crash dialog reporting "AppleMobileDeviceHelper quit unexpectedly" and an error dialog "iTunes was unable to load dataclass information from SyncServices. Reconnect or try again later." I've attempted the fix at support.apple.com/kb/HT1747 but it failed. I've also been having problems (at first seemingly unrelated) with the horrible Cisco VPN client, which started giving me this error: Error 51: Unable to communicate with the VPN subsystem I followed the steps at www.anders.com/cms/192/CiscoVPN/Error.51:.Unable.to.communicate.with.the.VPN.subsystem which don't seem to work for me, although I can connect if I use the command line with sudo : sudo vpnclient connect MyProfile I had a look in the Console app at the diagnostic messages and I noticed a pattern, that a number of apps were reporting "BUG IN CLIENT OF LIBDISPATCH". The affected programs are: AppleMobileBackup AppleMobileDeviceHelper Safari Webpage Preview Fetcher cvpnd (the Cisco VPN daemon) Of these, only the last is non-Apple software! The common text in the diagnostic messages is: Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x0000000000000001, 0x0000000000000000 Crashed Thread: 1 Dispatch queue: com.apple.libdispatch-manager Application Specific Information: BUG IN CLIENT OF LIBDISPATCH: Do not close random Unix descriptors I'm beginning to wonder if there's a permissions problem, or corruption of an important library, ... I should note that I've rebooted several times and verified the disk permissions and the disk. Any help would be great!

  Read the article

• Detecting source of memory usage on a Linux box

  - by apeace

  I have a toy Linux box with 256mb RAM running Ubuntu 10.04.1 LTS. Here is the output of free -m: total used free shared buffers cached Mem: 245 122 122 0 19 64 -/+ buffers/cache: 38 206 Swap: 511 0 511 Unless I'm reading this wrong, 122mb is being used and only 84mb of that is disk cache. Here are all processes I'm running sorted by memory usage (ps -eo pmem,pcpu,rss,vsize,args | sort -k 1 -r): %MEM %CPU RSS VSZ COMMAND 5.0 0.0 12648 633140 node /home/node/main/sites.js 1.5 0.0 3884 251736 /usr/sbin/console-kit-daemon --no-daemon 1.3 0.0 3328 77108 sshd: apeace [priv] 0.9 0.0 2344 19624 -bash 0.7 0.0 1776 23620 /sbin/init 0.6 0.0 1624 77108 sshd: apeace@pts/0 0.6 0.0 1544 9940 redis-server /etc/redis/redis.conf 0.6 0.0 1524 25848 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 103:105 0.5 0.0 1324 119880 rsyslogd -c4 0.4 0.0 1084 49308 /usr/sbin/sshd 0.4 0.0 1028 44376 /usr/sbin/exim4 -bd -q30m 0.3 0.0 904 6876 ps -eo pmem,pcpu,rss,vsize,args 0.3 0.0 888 21124 cron 0.3 0.0 868 23472 dbus-daemon --system --fork 0.2 0.0 732 19624 -bash 0.2 0.0 628 6128 /sbin/getty -8 38400 tty1 0.2 0.0 628 16952 upstart-udev-bridge --daemon 0.2 0.0 564 16800 udevd --daemon 0.2 0.0 552 16796 udevd --daemon 0.2 0.0 548 16796 udevd --daemon 0.0 0.0 0 0 [xenwatch] 0.0 0.0 0 0 [xenbus] 0.0 0.0 0 0 [sync_supers] 0.0 0.0 0 0 [netns] 0.0 0.0 0 0 [migration/3] 0.0 0.0 0 0 [migration/2] 0.0 0.0 0 0 [migration/1] 0.0 0.0 0 0 [migration/0] 0.0 0.0 0 0 [kthreadd] 0.0 0.0 0 0 [kswapd0] 0.0 0.0 0 0 [kstriped] 0.0 0.0 0 0 [ksoftirqd/3] 0.0 0.0 0 0 [ksoftirqd/2] 0.0 0.0 0 0 [ksoftirqd/1] 0.0 0.0 0 0 [ksoftirqd/0] 0.0 0.0 0 0 [ksnapd] 0.0 0.0 0 0 [kseriod] 0.0 0.0 0 0 [kjournald] 0.0 0.0 0 0 [khvcd] 0.0 0.0 0 0 [khelper] 0.0 0.0 0 0 [kblockd/3] 0.0 0.0 0 0 [kblockd/2] 0.0 0.0 0 0 [kblockd/1] 0.0 0.0 0 0 [kblockd/0] 0.0 0.0 0 0 [flush-202:1] 0.0 0.0 0 0 [events/3] 0.0 0.0 0 0 [events/2] 0.0 0.0 0 0 [events/1] 0.0 0.0 0 0 [events/0] 0.0 0.0 0 0 [crypto/3] 0.0 0.0 0 0 [crypto/2] 0.0 0.0 0 0 [crypto/1] 0.0 0.0 0 0 [crypto/0] 0.0 0.0 0 0 [cpuset] 0.0 0.0 0 0 [bdi-default] 0.0 0.0 0 0 [async/mgr] 0.0 0.0 0 0 [aio/3] 0.0 0.0 0 0 [aio/2] 0.0 0.0 0 0 [aio/1] 0.0 0.0 0 0 [aio/0] Now, I know that ps is not the best for viewing process memory usage, but that's because it tends to report more memory than is actually being used...meaning no matter how you look at it all my processes combined shouldn't be using near 122mb, even if you account for the disk cache. What's more, memory usage is growing all the time. I've had to restart my server once a week, because once my 256mb fills up it starts swapping, which it wouldn't do just for disk cache. Shouldn't there be some way for me to see the culprit?! I'm new to server admin, so please if there's something obvious I'm overlooking point it out to me. Just for good measure, the output of cat /proc/meminfo: MemTotal: 251140 kB MemFree: 124604 kB Buffers: 20536 kB Cached: 66136 kB SwapCached: 0 kB Active: 65004 kB Inactive: 37576 kB Active(anon): 15932 kB Inactive(anon): 164 kB Active(file): 49072 kB Inactive(file): 37412 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 524284 kB SwapFree: 524284 kB Dirty: 8 kB Writeback: 0 kB AnonPages: 15916 kB Mapped: 10668 kB Shmem: 188 kB Slab: 18604 kB SReclaimable: 10088 kB SUnreclaim: 8516 kB KernelStack: 536 kB PageTables: 1444 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 649852 kB Committed_AS: 64224 kB VmallocTotal: 34359738367 kB VmallocUsed: 752 kB VmallocChunk: 34359737600 kB DirectMap4k: 262144 kB DirectMap2M: 0 kB EDIT: I had misinterpreted the meaning of free -m at first. But even so: the important thing is that my OS eventually begins to use swap memory if I don't restart my server, which disk caching wouldn't do. So where do I look to see what is using all this memory?

  Read the article

• atl90.dll version 9.0.30729.4148 is missing in WinSxS folder

  - by mkva

  I have the following problem: when starting Visual Studio 2008, it says "Cannot find one or more components. Please reinstall the application." and stops. With the help of Sysinternals ProcessMonitor, I found out that Visual Studio could not load the atl90.dll 9.0.30729.4148 from the WinSxS folder. I tried to manually copy the older atl90.dll 9.0.30729.1 with the result that Visual Studio works again. Now I call this a dirty workaround, and not a solution. Plus I still don't know the reason why the atl90.dll disappeared in the first place. So my questions: - Does anyone know of a reason why this might have happened? - Does anyone know a real solution to the problem, e.g. a Microsoft download that includes the atl90.dll in the correct version 9.0.30729.4148 that installs into WinSxS? Some details: - WinXp SP3 - missing DLL: C:\WINNT\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_353599c2\atl90.dll - workaround DLL: C:\WINNT\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.1_x-ww_d01483b2\atl90.dll - manifests in WinSxS seem to be alright, but unfortunately all point to the missing version 9.0.30729.4148 Thanks, Markus

  Read the article

• ERROR with rpm_check_debug vs depsolve

  - by Frank Thornton

  Transaction Summary ========================================================================================================================================================== Install 9 Package(s) Upgrade 227 Package(s) Remove 1 Package(s) Total size: 252 M Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libasound.so.2()(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 libasound.so.2(ALSA_0.9)(64bit) is needed by libgcj-4.4.7-4.el6.x86_64 ** Found 15 pre-existing rpmdb problem(s), 'yum check' output follows: alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of alsa-lib = ('0', '1.0.22', '3.el6') alsa-lib-devel-1.0.22-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2()(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) alsa-utils-1.0.22-5.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc8)(64bit) frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2()(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) gstreamer-plugins-base-0.10.29-2.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2()(64bit) libgcj-4.4.7-3.el6.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2()(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9)(64bit) 1:qt-x11-4.6.2-26.el6_4.x86_64 has missing requires of libasound.so.2(ALSA_0.9.0rc4)(64bit) Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2013-12-23-22-364infzT.yumtx root@www1 [~]# I did some research and this is due to a 32bit binary trying to install itself or broken repo? root@www1 [~]# yum repolist Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.mirror.lstn.net * extras: mirror.ash.fastserv.com * updates: ftp.usf.edu repo id repo name status base CentOS-6 - Base 6,284+83 dag Dag RPM Repository for Red Hat Enterprise Linux 4,559+91 extras CentOS-6 - Extras 14 updates CentOS-6 - Updates 247+39 repolist: 11,104 Now I disabled epel and rpmforge repops and still ended up with the same issues. Ideas?

  Read the article

• Can you "swap" the Sysprep answer file in Windows 7

  - by Ben

  I have a load of new Lenovo laptops which I am due to distribute in my company. We are distributed in multiple locations and I want to ship the laptops "boxed" and untouched by IT hand for distribution. We are using LANDesk to do all the software distribution and provisioning, but are currently falling at the first hurdle as when booted, the laptops kick into the Lenovo mini-setup wizard. I assume this is because they have been sysprepped at Lenovo. In order to keep with our (almost) zero touch strategy I want the users to PXE boot into a PE of some sort, which will run a script on startup which replaces the sysprep answer file with one of my own. (i.e. prepopulated with product key, company info etc.) and then reboot to complete Sysprep. The plan is that this will run, and then install the LANDesk agent as a post-sysprep task, which in turn will complete the provisioning. Anyone have any experience / know any pitfalls to look out for / can suggest a suitable, PXE-bootable PE environment? Apologies for the verbosity of the question - it takes a bit of explaining! Thanks in advance, Ben

  Read the article

• Why do GPUs overheat?

  - by JAD

  About a year ago, I added a 9800GT (1 GB version) and a Corsair CX500 PSU to an HP M8000N computer. A few weeks ago, the HDD overheated and I decided to transfer the GPU & PSU to a new build, which consists of: i3 @ 3.3Ghz Gigabyte H61 Micro ATX Mobo 4GB RAM 500GB WD HDD DVD RW Drive Cooler Master Elite 430 Tower Once I had Win7 up and running, I installed all the essential drivers that came with the Gigabyte Mobo CD. However, whenever I tried installing the Graphics Media Accelerator driver, the computer would crash and enter an endless boot sequence on the next startup. I skipped installing this driver and installed the CD driver for the 9800GT, which by now is a year old. Everything was working fine, WEI rated my GPU at 6.6 graphics & aero performance. However, after updating my Nvidia drivers to the latest, the WEI dropped my rating to 3.3 for Aero, and 4.7 for graphics performance. Just to make sure that everything was ok, I ran Bad Company 2 on medium settings. The first few minutes ran just fine at a smooth framerate, so I dismissed this as Windows being Windows. About 6 hours later, I ran BC2 again. This time I averaged anywhere from 2-5 FPS. I checked the GPU temperature through GPU-Z, and it came back as 120C. The problem with this, is that the computer was on for six hours up to that point. Wouldn't the card have experienced a reactor core meltdown a lot sooner than that? Granted, the computer was "sleeping" some of the time, but still... The next day I took out a temperature gun and ran some tests. I would point the laser at a very specific area on the reverse side of the card (not the fan or "front"), and compare the temp reading with GPU-Z. After leaving the system on idle on idle for a few minutes, I ran BC2 twice. Here are the results: GPU-Z Reading / Temp Gun Reading / Time Null / 22.3°C / Comp is Off 53°C / 33.5°C / 1:49 78°C / 46°C / 1:53 - (First BC2 run; good framerate) 102°C / 64.6°C / 2:01 - (System is again on idle) 113°C / 64.8°C / 2:10 119°C / 71.8°C / 2:17 - (Second BC2 run; poor framerate) I should also mention that I also took a temp recording of another part of the GPU from 2:01-2:17. The temp in this area jumped from 75°C to 82.9°C in that time frame. This pretty much confirms that GPU-Z is reporting the temperature accurately, and the card is overheating. But I'd like to know why; the cars is doing nothing and still the temperature climbs at a steady rate. I thoroughly cleaned the GPU and PSU when I salvaged them from the old HP M8000N computer with a can of compressed air, dust cant be the issue. Similarly, the rest of the computer is brand new. I installed various Nvidia drivers, but no luck. It seems strange to me that a year-old card is suddenly failing on me; aren't they supposed to last at least two years? Could this be a driver issue? Is the motherboard faulty? Could the PSU be overfeeding the card on voltage? Neither case seems likely, as the CPU, RAM and otherwise the rest of the comp has worked flawlessly and has stayed well within respectable temp ranges (the i3 lingers around 50C, the HDD stays at 30C, so does the PSU). How can I pinpoint the issue?

  Read the article

• Ubuntu server random hangups.

  - by Ebbe

  Hello all. this is my first post to this forum which I found through the superb podcast "It Conversations" from StackOverFlow. I am quite in my role as server administrator for an exhibition center in London. Basically we have a central file and sql server to which roughly 40 stations connects to to upload/download data used/captured by a set of applications. Over the last weeks we have experienced a few random hangups to our applications, and as it always happen to multiple applications simultaneously I do not believe that the applications are the source of the problem. We also monitor the network using Dartware Intermapper which indicates that all switches and stations on the network has been reachable during the downtime. Thus, its all pointing to the server. I have been looking through all log files I can think of and the only thing so far that I have found suspicious is the following lines in the syslog which are from the time of one of the hangups: Feb 6 17:14:27 es named[5582]: client 127.0.0.1#33721: RFC 1918 response from Internet for 150.0.168.192.in-addr.arpa Feb 6 17:14:40 es named[5582]: client 127.0.0.1#32899: RFC 1918 response from Internet for 152.0.168.192.in-addr.arpa Feb 6 17:15:01 es /USR/SBIN/CRON[1956]: (es) CMD (/home/es/apps/es/bin/es_checksum.sh) Feb 6 17:16:06 es /USR/SBIN/CRON[2031]: (es) CMD (/home/es/apps/es/bin/es_checksum.sh) Feb 6 17:21:00 es named[5582]: *** POKED TIMER *** Feb 6 17:21:00 es last message repeated 2 times Feb 6 17:21:07 es named[5582]: client 127.0.0.1#44194: RFC 1918 response from Internet for 143.0.168.192.in-addr.arpa Feb 6 17:21:12 es named[5582]: client 127.0.0.1#59004: RFC 1918 response from Internet for 164.0.168.192.in-addr.arpa I find a few lines of interesting lines here: 1) "RFC 1918 response from Internet for 150.1.168.192.in-addr.arpa". I see this a lot in the syslog. And basically everytime I do a nslookup for any of the computers in the cluster I get a new similar line in the syslog. I understand from google that this has to do with reverse lookup problems. But I do not know how that could effect the systems. Lets say that one of these lines appear every time one of the userstations connects to the server, which may happen several times a second. Could this possible cause a hangup of the entire server? 2) POKED TIMER, I have googled this quite a lot, but not found an explaination that I can relate to. What does this mean? 3) The timestamps, it seems like the entire server has stopped responding for several minutes. Normally there are many printouts to the syslog per minute on this server. Furthermore the CRON job is set to run once every minute. Which according to the log, hasent happened here. OS: Ubuntu 8.04 Kernel: Linux 2.6.24-24-server x86_64 GNU/Linux. Hardware: Dell R710, RAID1, CPU: 2x XEON E5530. 16GB Memory. Average load is very low, and memory should not be a problem. Please let me know if you need any additional information. Best wishes, Ebbe

  Read the article

• what port should I open for mysql master-master replication?

  - by Vanddel

  I have two servers running php5-fpm and a load balancer running nginx, the three servers share /var/www/drupal using nfs. nfs is working correctly. I replicated the two servers' database using mysql master master replication. everything was working fine till I added my iptables rules. In my iptables script, I first drop all chains then I accept the ones I want, other than that there are no other drop statements. I opened port 3306 for mysql replication like this : (the rule is on both servers ) iptables -A INPUT -p tcp -s $ip_Of_Other_Server --dport 3306 -j ACCEPT iptables -A OUTPUT -p tcp -d $ip_Of_Other_Server --sport 3306 -j ACCEPT The problem is, when I run both servers and I try to log in using my account on drupal it doesn't log in although I find a successful log in attempt in drupal logs. When I run only one server of them I can log in normally. when I allow everything in my iptables rules it works normally. I believe there's some port I need to open using iptables for the replication to work correctly but I can't find which one to open.

  Read the article

• Setup site folders on Apache and PHP

  - by Cobus Kruger

  I'm trying to set up my first Apache server on my Windows PC at home and I have real trouble finding out which configuration settings go where. I downloaded and installed XAMPP which seemed to get everything nicely set up and can see a working website on http://localhost. So far so good. The point of this is to develop a website of course, and to make my life easier (irony?), I wanted to let the web site root point to my Eclipse project folder. So I opened httpd-vhosts.conf, uncommented a VirtualHost block and changed its DocumentRoot to my local path. Now when I try to load http://localhost I get a 403 (Access denied) error. So where do I configure permissions for my folder? And is that all I need to let my site run from the folder specified or am I going to have to clear another hurdle? Update: I tried to simplify things a little, so I reinstalled XAMPP and got back to a working http://localhost. Then I confirmed that httpd-vhosts.conf is included in httpd.conf and made the following changes to httpd-vhosts.conf: Uncommented the line NameVirtualHost *:80 Added a virtual host shown below. Restarted Apache and saw the expected page on http://localhost <VirtualHost *:80> DocumentRoot "C:/xampp/htdocs/" ServerName localhost ErrorLog "logs/dummy-host2.localhost-error.log" CustomLog "logs/dummy-host2.localhost-access.log" combined </VirtualHost> I then created a new folder named C:\testweb, added an index.html file and changed the DocumentRoot line shown above. For all intents and purposes I would then expect the two configurations to be equivalent. But this setup gives me an error 403. Even though the C:\testweb folder already had the same permissions as the C:\xampp\htdocs folder, I then went further and gave the Everyone group full control of C:\testweb and got exactly the same problem. So what did I miss?

  Read the article

• Looking for a help desk ticketing system..

  - by Dan

  Hi guys Im looking for a good help desk ticket solution. It must perform the following actions for it to be useful. It needs to have a single point of contact via email..e.g [email protected] If we recieve a telephone(or an email outside of the system) we need to be able to create a ticket as if had been added via the single point of contact, this needs to be done with ease in order to save time. Certain people within our organisation deal with certain customers, so if the email/ custom input support call as mentioned in bullet 2 is picked up as having a relationship with that certain person in our organisation it needs to be sent to them/put in their queue for them to work on. If a person is out of office or sick any tickets sent to them must be forwarded to somebody else or put into a seperate pool of tickets that anybody can access. Perhaps have an agent that sorts through tickets in the pool and assigns them to anybody who is available, preferably the person with fewest tickets in their queue/list. Once a customer emails and the system logs it they immediately get a response with a ticket number and maybe details of who is dealing with the problem. Any correspondance in relation to a particular ticket is automatically grouped into some sort of message, and not made into a load of separate tickets. I.e system scans incoming email subjects for ticket numbers and assosciates it with exisiting tickets if that number exists. Any help is much appreciated Thanks P.S I have taken a look at OTRS but i'm not feeling it so unless someone can convince me I guess i'm after an alternative.

  Read the article

• Flash plugin locks up Firefox, Chrome and Safari behind a corporate proxy, IE6 works fine

  - by Shevek

  At work I am forced by corporate policy to use IE6. Obviously this is not so good so I use FF for most of my browsing. However there is a problem once I have installed the Flash plug-in - FF locks up when trying to load Flash media. Looking at the status bar at the time of the lock up it appears this happens when the browser tries to get cross domain data. The Flash Active X plug-in in IE does not suffer this issue. I have tried it in a brand new profile in FF with Flash as the only plug in and it locks up. We have 2 different proxy servers and both exhibit the same problem. I have also tried Chrome and Safari and both lock up with the plug-in installed. So, has anyone else had this problem and solved it? Or, is there any way to disable cross domain data access in the flash plug-in? Or, is there any way to disable the "This site needs an additional plug-in" ribbon which appears when the plug-in is not installed. Many thanks!

  Read the article

• Why can I not access the internet when Windows 7 finds no issue with the ethernet connection and the network can see my device?

  - by WannabeCoder

  So I just moved from a house to an apartment. In the house and the apartment I had Uverse set up - and in both I had my desktop connected via a ~40 foot long cat5 cable. However, upon moving to the apartment I found that my ethernet connection no longer provides internet. This would seem like a mundane problem if not for: The router can see the computer on the network Windows 7 (the desktop's OS) detects no problems with the ethernet connection. Connections over the internet (i.e. browser windows, Pandora, etc.) do not immediately fail. Instead they load for 2 minutes and then finally give up. Devices connected over the Wifi (PS4, Laptop) access the internet just fine While removing the cat5 cable from my house, I accidentally damaged the locking tab but managed to bend it back into the appropriate position. I would suspect that a bad cat5 cable might be to blame if not for the above issues (thought I've heard bad cat5 cables cause the most nonsensical problems) and the fact that I tested the cat5 cable by having it share internet between my laptop (working internet) to my desktop and it functioned just fine and provided the desktop with internet. My ipconfig /all successfully finds a default gateway, DHCP server, and DNS server. What could possibly be causing the problem?

  Read the article

• Server cost for smartphone app with web service

  - by FrankieA

  Hello, I am working on a smartphone application that will require a backend web service - but I have absolutely clueless to how much it will cost. Web Service will handle: - login of users - cataloging of our user base - holding minimal profile information for users (the only binary data is a display picture which will be < 20k each) - performing some very minor calculation/algorithm before return results - All the above will be communicated to server from a smartphone (iPhone/BlackBerry/Android) Bandwidth Requirements: - We want to handle up to 10k users throughout the day. - I predict 10k * 50 HTTP requests a day = 500,000 requests a day * 30 = 15 million requests a month Space Requirements: - Data will be in SQL database. - I predict 1MB/user * 10k = 10GB + overhead. In other words - space is not a big issue. Software Requirements: (unless someone knows an alternative) - Windows Server 2008 + IIS - MSFT SQL Server Note: This is 100% new to me, so please hit me with all you got. Do I need Windows Server or are there alternative? Is it better to get multiple cheap servers to distribute load? Will Amazon S3 work for me? How about Windows Azure? Thank you!!

  Read the article

• atl90.dll version 9.0.30729.4148 is missing in WinSxS folder

  - by mkva

  Hi I have the following problem: when starting Visual Studio 2008, it says "Cannot find one or more components. Please reinstall the application." and stops. With the help of Sysinternals ProcessMonitor, I found out that Visual Studio could not load the atl90.dll 9.0.30729.4148 from the WinSxS folder. I tried to manually copy the older atl90.dll 9.0.30729.1 with the result that Visual Studio works again. Now I call this a dirty workaround, and not a solution. Plus I still don't know the reason why the atl90.dll disappeared in the first place. So my questions: - Does anyone know of a reason why this might have happened? - Does anyone know a real solution to the problem, e.g. a Microsoft download that includes the atl90.dll in the correct version 9.0.30729.4148 that installs into WinSxS? Some details: - WinXp SP3 - missing DLL: C:\WINNT\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.4148_x-ww_353599c2\atl90.dll - workaround DLL: C:\WINNT\WinSxS\x86_Microsoft.VC90.ATL_1fc8b3b9a1e18e3b_9.0.30729.1_x-ww_d01483b2\atl90.dll - manifests in WinSxS seem to be alright, but unfortunately all point to the missing version 9.0.30729.4148 Thanks, Markus

  Read the article

• Solaris TCP stack tuning

  - by disserman

  We have a large web project (about 2-3k requests per second), using haproxy (http://haproxy.1wt.eu/) as a frontend and load balancer between the java application servers. The frontend (haproxy) is running on Linux but we are going to migrate it to the Solaris 10 as all our other servers are running under Solaris. After switching a traffic I see the two things: a) the web site became loading slower (5-10 seconds with images in comparison to 2-3 seconds on Linux) b) sometimes haproxy fails to perform a "lifecheck" (get a special web page and analyze http response code) due to the socket timeout. After switching traffic back to Linux everything is okay. I've tried to tune all params I found in /dev/tcp but no progress. I believe the problem is in some open socket limitations. If someone can point me to the answer, I would be greatly appreciated. p.s. haproxy is running under Xen DomU on Linux (Kernel 2.6.18, Debian 5), under zone on Solaris (10 u8). the only thing we did on Linux is increasing of ip_conntrack_max (I believe Solaris option tcp_conn_req_max_q is the equivalent).

  Read the article

• Unable To Successfully Use Java Anywhere (Windows 7 64bit)

  - by Nathan Smith

  This is a bit of an odd issue: (This is with JRE 7u7 32bit.) New Lenovo W530 laptop, everything is shiny. I tried to use a java applet for the first time recently (in Chrome). I got the Java logo and it started spinning like it was going to load, but didn't get anywhere and the browser locked up. I tried IE. Same deal. Tried Firefox. Same deal. So, I did the usual things: Rebooted, nothing. Un-installed Java, rebooted, re-installed, nothing. Tried it installing a 64bit Java as well. Same thing. I tried JRE6. Same thing. I uninstalled and manually deleted all the registry entries I could find related to it, then re-installed. Same thing. I un-installed and used the JavaRa utility. Same exact thing. I've not been able to use web applets or desktop stuff (minecraft), until yesterday. I did a graphics driver update and I was able to play minecraft for small amounts of time. It crashed regularly and wouldn't start reliably. No change in web applets. I'm at my wits end here. I'm to the point where reformatting is my only option. If anyone has any ideas at all, that would be awesome.

  Read the article

• htaccess not properly rewriting urls

  - by Cameron Ball

  This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

  Read the article

• Puppet and Vim fighting over Ruby version

  - by devians

  I have installed puppet from the .dmg from puppetlabs. If I remove ruby 1.9.3, puppet works, but other things like my vim install (dependant plugins) do not. According to http://docs.puppetlabs.com/guides/platforms.html#ruby-versions 1.9.3 is supported. So whats going wrong with puppet? % uname -a Darwin Kusanagi.local 11.4.2 Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64 x86_64 % which ruby /usr/local/bin/ruby % ruby --version ruby 1.9.3p327 (2012-11-10 revision 37606) [x86_64-darwin11.4.2] % /usr/bin/ruby --version ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin11.0] % brew info ruby 1 ? ruby: stable 1.9.3-p327, HEAD http://www.ruby-lang.org/en/ Depends on: pkg-config, readline, gdbm, libyaml /usr/local/Cellar/ruby/1.9.3-p327 (796 files, 17M) * https://github.com/mxcl/homebrew/commits/master/Library/Formula/ruby.rb ==> Options --with-tcltk Install with Tcl/Tk support --with-suffix Suffix commands with "19" --universal Build a universal binary --with-doc Install documentation ==> Caveats NOTE: By default, gem installed binaries will be placed into: /usr/local/Cellar/ruby/1.9.3-p327/bin You may want to add this to your PATH. % puppet /usr/local/Cellar/ruby/1.9.3-p327/lib/ruby/1.9.1/rubygems/custom_require.rb:36:in `require': cannot load such file -- puppet/util/command_line (LoadError) from /usr/local/Cellar/ruby/1.9.3-p327/lib/ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from /usr/bin/puppet:3:in `<main>'

  Read the article

• What characteristic of networking/TCP causes linear relation between TCP activity and latency?

  - by DeLongey

  The core of this problem is that our application uses websockets for real-time interfaces. We are testing our app in a new environment but strangely we're noticing an increasing delay in TCP websocket packets associated with an increase in websocket activity. For example, if one websocket event occurs without any other activity in a 1-minute period, the response from the server is instantaneous. However, if we slowly increase client activity the latency in server response increases with a linear relationship (each packet will take more time to reach the client with more activity). For those wondering this is NOT app-related since our logs show that our server is running and responding to requests in under 100ms as desired. The delay starts once the server processes the request and creates the TCP packet and sends it to the client (and not the other way around). Architecture This new environment runs with a Virtual IP address and uses keepalived on a load balancer to balance the traffic between instances. Two boxes sit behind the balancer and all traffic runs through it. Our host provider manages the balancer and we do not have control over that part of the architecture. Theory Could this somehow be related to something buffering the packets in the new environment? Thanks for your help.

  Read the article

• Gmail and FB is not rendering properly in Firefox

  - by Andy

  I am unable read Gmail in my Firefox browser on my laptop. However, there are no problems when I try to access Gmail on my office desktop. In fact, Gmail renders fine on IE on both computers. Things I have tried: Uninstalling and reinstalling Firefox. Using Firefox 3.6.26 and Firefox 10; same problem. Clearing the cache. But all to no avail. For starters: My background image does not get loaded. It says "Oops. Your selected image failed to load". The buttons for the new look do not get rendered, but when I do a mouse-over I see text which helps me navigate. When I try to read a message, I see the subject line and I see the reply / forward box. The message body does not get rendered, it seems like a styling error. Check this screenshot where the icons in the GMail new look are not rendered properly Check this screenshot where even facebook is not getting rendered properly EDIT: 25th Feb 2012 GMAIL is getting rendered fine in the old look

  Read the article

• (solved) `ssh foo "<command/>"` not loading remote aliases?

  - by TomRoche

  summary: Why does this fail $ ssh foo 'R --version | head -n 1' bash: R: command not found but this succeeds $ ssh foo 'grep -nHe 'bashrc' ~/.bash_profile' /home/me/.bash_profile:3:# source the users .bashrc if it exists /home/me/.bash_profile:4:if [ -f "${HOME}/.bashrc" ] ; then /home/me/.bash_profile:5: source "${HOME}/.bashrc" $ ssh foo 'grep -nHe "\WR\W" ~/.bashrc' /home/me/.bashrc:118:alias R='/share/linux86_64/bin/R' $ ssh foo '/share/linux86_64/bin/R --version | head -n 1' R version 2.14.1 (2011-12-22) ? details: I am a (rootless) user on 2 clusters. One uses environment modules, so any given server on that cluster can provide (via module add) pretty much the same resources. The other cluster, on which I must also unfortunately work, has servers managed individually, so I get in the habit of doing, e.g., EXEC_NAME='whatever' for S in 'foo' 'bar' 'baz' ; do ssh ${SERVER} "${EXEC_NAME} --version" done This works fine for packages installed normally/consistently, but often (for reasons unknown to me) packages are not: e.g. (compare alias below to alias above), $ ssh bar 'R --version | head -n 1' bash: R: command not found $ ssh bar 'grep -nHe 'bashrc' ~/.bash_profile' /home/me/.bash_profile:3:# source the users .bashrc if it exists /home/me/.bash_profile:4:if [ -f "${HOME}/.bashrc" ] ; then /home/me/.bash_profile:5: source "${HOME}/.bashrc" $ ssh bar 'grep -nHe "\WR\W" ~/.bashrc' /home/me/.bashrc:118:alias R='/share/linux/bin/R' $ ssh bar '/share/linux86_64/bin/R --version | head -n 1' R version 2.14.1 (2011-12-22) Using aliases copes well with these install differences when I interactively shell into the server, but fails when I try to script ssh commands (as above); i.e., # interactively $ ssh foo ... foo> R --version calls my alias for R on remote host=foo, but # scripting $ ssh foo 'R --version' doesn't. What do I need to do to make ssh foo "<command/>" load my aliases on the remote host?

  Read the article

< Previous Page | 709 710 711 712 713 714 715 716 717 718 719 720  | Next Page >