Search Results

Search found 23949 results on 958 pages for 'test test'.

Page 718/958 | < Previous Page | 714 715 716 717 718 719 720 721 722 723 724 725  | Next Page >

• Mixed Solaris 10 and 11 versions in logical domains on the same server

  - by jsavit

  One question that comes up frequently is whether you can mix Solaris 10 and Solaris 11 in different logical domains under Oracle VM Server for SPARC. The answer is yes depending only on the system software requirements for the underlying hardware platform. Different versions of Solaris 10 and 11 can exist side-by-side on the same server and can act as control, service, I/O or guest domains subject only to the minimum software levels documented in the System Requirements section of the Oracle VM Server for SPARC Release Notes. Here's an example just taken from a running system. First, here's the control domain, which is running Solaris 10. I've highlighted a guest running Solaris 11. # uname -a SunOS atl-sewr-24 5.10 Generic_147440-01 sun4v sparc SUNW,SPARC-Enterprise-T5220 # ldm -V Logical Domains Manager (v 2.1) Hypervisor control protocol v 1.7 Using Hypervisor MD v 1.3 System PROM: Hypervisor v. 1.10.0 @(#)Hypervisor 1.10.0 2011/04/27 16:19\015 # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.6% 120d 17h atl-sewr-pool-148 active -n---- 5001 8 2G 0.1% 119d 21h atl-sewr-pool-152 active -n---- 5000 8 4G 0.2% 112d 19h atl-sewr-pool-154 active -n---- 5002 8 2G 0.1% 120d 15h atl-sewr-pool-155 active -n---- 5003 16 2G 0.0% 26d 14h 30m This system is running Oracle VM Server 2.1 with a Solaris 10 control domain. Hmm, I should update this machine to 2.2 when I get a few free moments. Upgrading is very straightforward. Here's a display logging into the highlighted guest: Last login: Mon May 21 10:18:16 2012 from dhcp-adc-twvpn- Oracle Corporation SunOS 5.11 11.0 November 2011 sewr@atl-sewr-pool-152:~$ uname -a SunOS atl-sewr-pool-152 5.11 11.0 sun4v sparc SUNW,SPARC-Enterprise-T5220 sewr@atl-sewr-pool-152:~$ cat /etc/release Oracle Solaris 11 11/11 SPARC Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved. Assembled 18 October 2011 sewr@atl-sewr-pool-152:~$ sudo virtinfo -ct Password: Domain role: LDoms guest Control domain: atl-sewr-24 sewr@atl-sewr-pool-152:~$ That's running the GA version of Solaris 11, so I probably should update that some time too. Note the use of the virtinfo -ct command that lets the guest get information about the hosting environment. Summary You can mix and match versions of Solaris in logical domains. All the different combinations work: Solaris 10 and/or Solaris 11 control and service domains with Solaris 10 and/or Solaris 11 guests. Mixing different guest OS levels on the same server is one of the traditional reasons for using virtual machines in the first place since virtual machines were invented some 40 years ago, used to run production and test systems in parallel while upgrading OS levels. This can easily be done with Oracle VM Server for SPARC (Logical Domains).

  Read the article

• Great Expectations - Fusion HCM Highlights at OOW

  - by Kathryn Perry

  A guest post by Lisa Conley, Principal Product Strategy Manager, Fusion HCM, Oracle Applications Development Oracle Open World is just around the corner! There's always so much to see and do and learn at the conference so I want to share some of the 'don't miss' Fusion HCM highlights with you. (Use this tool to search by session number to get a full description.) For starters, we have several customers who will be sharing their Fusion HCM implementation stories. We'll kick off these presentations with a customer panel at 12:15 on Monday in Moscone West 2005 (CON9420). You'll hear from Zillow, the Gerson Lehrman Group, UBS, and ConAgra about their experiences with our products. Oracle partners MarketSphere (CON8581) and eVerge (CON3800) have implemented Fusion HCM themselves and and will talk about how they'll use their experiences to help customers with their implementations (both are in Moscone West 2006). Beth Correa, CEO of Official Payroll Advisor, will highlight her favorite things about Oracle Fusion HCM Payroll on Tuesday at 11:45 in Moscone West 2006 (CON6691). And you'll get to hear from customers again when they speak with Steve Miranda in his Oracle Applications: Strategic Directions and Recommendations session on Tuesday at 1:15 in Moscone West 2002/2004 (CON11434). To bring it all together for you, we've listed all your Fusion HCM opportunities to learn and interact in this Focus On Document. I am really looking forward to the sessions on Human Capital Management in the Cloud. The Oracle Cloud combines the multiple product offerings into a single environment that leverages a common technology infrastructure enabling users to focus on their business - not the business of managing environments. On Tuesday at 10:15 in Moscone West 2002/2004, there is a General Session entitled the Future of Oracle HCM -- Strategy and Roadmap (GEN9505). This will touch on all product lines. Fusion HCM will be highlighted in Gretchen Alarcon's Oracle HCM: Overview, Strategy, Customer Experiences, and Roadmap session on Monday at 12:15 in Moscone West 2005 (CON9410). Also on Tuesday at 1:15 in Moscone West 2006, is a session focused on Talent Management and how you can try out these new products, co-existing with your current product set (CON9430). This is important in that you can test the waters before diving in. ConAgra will be sharing their experience in this session as well.  And of course, if you want to have a personal demonstration, please come by the Oracle DEMOgrounds in West Exhibition Hall Level 1 or the Oracle Cloud Services Lounge at Moscone West Level 3 where our Oracle HCM Cloud Services experts will be ready to answer your questions. I hope you have a wonderful week in San Francisco.Lisa ConleyPrincipal Product Strategy Manager, Fusion HCMApplications DevelopmentOracle Corporation

  Read the article

• English-Focused Translation Bookmarklet for Your Browser

  - by Asian Angel

  Are you wanting a translation bookmarklet that just focuses on translating websites into English? Then you will want to take a look at the To English Bookmarklet. Get the Bookmarklet To install the To English Bookmarklet visit the webpage at Lifehacker (link below), grab the bookmarklet with your mouse, and drag it to your “Bookmarks Toolbar”. Now you are ready for one-click translation into English. To English in Action We decided to test our new bookmarklet on two different International Mozilla websites. The first one was in Swedish… One click and there it is. Notice that there is a “translation bar frame” that will still let you choose yet another language to translate the webpage into if you desire. Definitely a nice touch… Our second example was in Russian. Once again a single click and… The website is now in English. On this particular page the “central green graphic” was affected by the translation and the two sidebar buttons are “pre-made” but that is ok. You can read what you need to without any problems. Conclusion If you have been wanting a bookmarklet that just focuses on translating into English then this should be perfect for you. If you are looking for a bookmarklet that gives you access to a Google Translation Bar then be certain to see our article here. Links Add the To English Bookmarklet to Your Browser Similar Articles Productive Geek Tips Add a Google Translation Bar to Your Favorite BrowserSkip “Next Links” with the PageZipper BookmarkletCreate Shortened goo.gl URLs in Your Favorite BrowserQuickly Translate Text to Another Language in Word 2007See Where Shortened URLs “Link To” in Your Favorite Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa !

  Read the article

• Error Copying Source File in Audio Spectrum Visualizer [closed]

  - by David Dimalanta

  I'm testing this code using LibGDX, Java, and Eclipse to test the music player that detects the frequency. I saw this one on this website plus the link on GitHub: http://gtomee.com/2012/07/28/audio-spectrum-visualizer-with-libgdx/ It works when running on desktop project folder but not on Android project folder and the result is this: 10-10 13:57:45.320: E/AndroidRuntime(9421): FATAL EXCEPTION: GLThread 16845 10-10 13:57:45.320: E/AndroidRuntime(9421): com.badlogic.gdx.utils.GdxRuntimeException: Error copying source file: soundtrack 1 bioman.mp3 (Internal) 10-10 13:57:45.320: E/AndroidRuntime(9421): To destination: tmp/audio-spectrum.mp3 (External) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.copyFile(FileHandle.java:625) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.copyTo(FileHandle.java:534) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.bodapps.rhythm.Drop.create(Drop.java:393) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.backends.android.AndroidGraphics.onSurfaceChanged(AndroidGraphics.java:292) 10-10 13:57:45.320: E/AndroidRuntime(9421): at android.opengl.GLSurfaceView$GLThread.guardedRun(GLSurfaceView.java:1505) 10-10 13:57:45.320: E/AndroidRuntime(9421): at android.opengl.GLSurfaceView$GLThread.run(GLSurfaceView.java:1240) 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: com.badlogic.gdx.utils.GdxRuntimeException: Error stream writing to file: tmp/audio-spectrum.mp3 (External) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:313) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.copyFile(FileHandle.java:623) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 5 more 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: com.badlogic.gdx.utils.GdxRuntimeException: Error writing file: tmp/audio-spectrum.mp3 (External) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:293) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:305) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 6 more 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: java.io.FileNotFoundException: /storage/sdcard0/tmp/audio-spectrum.mp3: open failed: EACCES (Permission denied) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.IoBridge.open(IoBridge.java:416) 10-10 13:57:45.320: E/AndroidRuntime(9421): at java.io.FileOutputStream.<init>(FileOutputStream.java:88) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:289) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 7 more 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: libcore.io.ErrnoException: open failed: EACCES (Permission denied) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.Posix.open(Native Method) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.BlockGuardOs.open(BlockGuardOs.java:110) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.IoBridge.open(IoBridge.java:400) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 9 more I'm not sure if I come this to the right place for help and suggestions.

  Read the article

• "Shared Folders" Feature Is Not Working In VirtualBox

  - by Islam Hassan

  I have Ubuntu 11.10 as a host and another linux 2.6 distribution as a guest. When I try to setup guest additions, this error message appears Building the shared folder support module .. fail And because of that, when I run the following in terminal mount -t vboxsf shared /root/shared I get the following error message mount: unknown filesystem type 'vboxsf' Any syggestions please? EDIT Sorry, the mentioned error message isn't complete, this is it. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) This is the content of vboxadd-install.log Uninstalling modules from DKMS Attempting to install using DKMS Creating symlink /var/lib/dkms/vboxguest/4.1.2/source -> /usr/src/vboxguest-4.1.2 DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... make KERNELRELEASE=3.2.6 -C /lib/modules/3.2.6/build M=/var/lib/dkms/vboxguest/4.1.2/build..........................(bad exit status: 2) Error! Bad return status for module build on kernel: 3.2.6 (i686) Consult the make.log in the build directory /var/lib/dkms/vboxguest/4.1.2/build/ for more information. 0 0 ERROR: binary package for vboxguest: 4.1.2 not found Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 -C /lib/modules/3.2.6/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* WARNING: Symbol version dump /usr/src/linux-source-3.2.6/Module.symvers is missing; modules will have no dependencies and modversions. Actually the log file is very large and it exceeds the 30000 characters limit. How can I upload the entire log file here?

  Read the article

• BizTalk 2009 - Custom Functoid Categories

  - by StuartBrierley

  I recently had cause to code a number of custom functoids to aid with some maps that I was writing. Once these were developed and deployed to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions a quick refresh allowed them to appear in toolbox.  After dropping these on a map and configuring the appropriate inputs I tested the map to check that they worked as expected.  All but one of the functoids worked as expecetd, but the final functoid appeared not to be firing at all. I had already tested the code used in a simple test harness application, so I was confident in the code used, but I still needed to figure out what the problem might be. Debugging the map helped me on the way; for some reason the functoid in question was not shown correctly - the functoid definition was wrong. After some investigations I found that the functoid type you assign when coding a custom functoid affects more than just the category it appears in; different functoid types have different capabilities, including what they can link too.  For example, a logical functoid can not provide content for an output element, it can only say whether the element exists.  Map this via a Value Mapping functoid and the value of true or false can be seen in the output element. The functoid I was having problems with was one whare I had used the XPath functoid type, this had seemed to be a good fit as I was looking up content in a config file using xpath and I wanted it to appear the advanced area.  From the table below you can see that this functoid type is marked as "Internal Only", preventing it from being used for custom functoids.  Changing my type to String allowed the functoid to function as expected. Category Description Toolbox Group Assert Internal Use Only Advanced Conversion Converts characters to and from numerics and converts numbers from one base to another. Conversion Count Internal Use Only Advanced Cumulative Performs accumulations of the value of a field that occurs multiple times in a source document and outputs a single output. Cumulative DatabaseExtract Internal Use Only Database DatabaseLookup Internal Use Only Database DateTime Adds date, time, date and time, or add days to a specified date, in output data. Date/Time ExistenceLooping Internal Use Only Advanced Index Internal Use Only Advanced Iteration Internal Use Only Advanced Keymatch Internal Use Only Advanced Logical Controls conditional behavior of other functoids to determine whether particular output data is created. Logical Looping Internal Use Only Advanced MassCopy Internal Use Only Advanced Math Performs specific numeric calculations such as addition, multiplication, and division. Mathematical NilValue Internal Use Only Advanced Scientific Performs specific scientific calculations such as logarithmic, exponential, and trigonometric functions. Scientific Scripter Internal Use Only Advanced String Manipulates data strings by using well-known string functions such as concatenation, length, find, and trim. String TableExtractor Internal Use Only Advanced TableLooping Internal Use Only Advanced Unknown Internal Use Only Advanced ValueMapping Internal Use Only Advanced XPath Internal Use Only Advanced Links http://msdn.microsoft.com/en-us/library/microsoft.biztalk.basefunctoids.functoidcategory(BTS.20).aspx http://blog.eliasen.dk/CommentView,guid,d33b686b-b059-4381-a0e7-1c56e808f7f0.aspx

  Read the article

• Advantages and disadvantages of building a single page web application

  - by ryanzec

  I'm nearing the end of a prototyping/proof of concept phase for a side project I'm working on, and trying to decide on some larger scale application design decisions. The app is a project management system tailored more towards the agile development process. One of the decisions I need to make is whether or not to go with a traditional multi-page application or a single page application. Currently my prototype is a traditional multi-page setup, however I have been looking at backbone.js to clean up and apply some structure to my Javascript (jQuery) code. It seems like while backbone.js can be used in multi-page applications, it shines more with single page applications. I am trying to come up with a list of advantages and disadvantages of using a single page application design approach. So far I have: Advantages All data has to be available via some sort of API - this is a big advantage for my use case as I want to have an API to my application anyway. Right now about 60-70% of my calls to get/update data are done through a REST API. Doing a single page application will allow me to better test my REST API since the application itself will use it. It also means that as the application grows, the API itself will grow since that is what the application uses; no need to maintain the API as an add-on to the application. More responsive application - since all data loaded after the initial page is kept to a minimum and transmitted in a compact format (like JSON), data requests should generally be faster, and the server will do slightly less processing. Disadvantages Duplication of code - for example, model code. I am going to have to create models both on the server side (PHP in this case) and the client side in Javascript. Business logic in Javascript - I can't give any concrete examples on why this would be bad but it just doesn't feel right to me having business logic in Javascript that anyone can read. Javascript memory leaks - since the page never reloads, Javascript memory leaks can happen, and I would not even know where to begin to debug them. There are also other things that are kind of double edged swords. For example, with single page applications, the data processed for each request can be a lot less since the application will be asking for the minimum data it needs for the particular request, however it also means that there could be a lot more small request to the server. I'm not sure if that is a good or bad thing. What are some of the advantages and disadvantages of single page web applications that I should keep in mind when deciding which way I should go for my project?

  Read the article

• Export all SSIS packages from msdb using Powershell

  - by jamiet

  Have you ever wanted to dump all the SSIS packages stored in msdb out to files? Of course you have, who wouldn’t? Right? Well, at least one person does because this was the subject of a thread (save all ssis packages to file) on the SSIS forum earlier today. Some of you may have already figured out a way of doing this but for those that haven’t here is a nifty little script that will do it for you and it uses our favourite jack-of-all tools … Powershell!! Imagine I have the following package folder structure on my Integration Services server (i.e. in [msdb]): There are two packages in there called “20110111 Chaining Expression components” & “Package”, I want to export those two packages into a folder structure that mirrors that in [msdb]. Here is the Powershell script that will do that:Param($SQLInstance = "localhost") #####Add all the SQL goodies (including Invoke-Sqlcmd)##### add-pssnapin sqlserverprovidersnapin100 -ErrorAction SilentlyContinue add-pssnapin sqlservercmdletsnapin100 -ErrorAction SilentlyContinue cls $Packages = Invoke-Sqlcmd -MaxCharLength 10000000 -ServerInstance $SQLInstance -Query "WITH cte AS ( SELECT cast(foldername as varchar(max)) as folderpath, folderid FROM msdb..sysssispackagefolders WHERE parentfolderid = '00000000-0000-0000-0000-000000000000' UNION ALL SELECT cast(c.folderpath + '\' + f.foldername as varchar(max)), f.folderid FROM msdb..sysssispackagefolders f INNER JOIN cte c ON c.folderid = f.parentfolderid ) SELECT c.folderpath,p.name,CAST(CAST(packagedata AS VARBINARY(MAX)) AS VARCHAR(MAX)) as pkg FROM cte c INNER JOIN msdb..sysssispackages p ON c.folderid = p.folderid WHERE c.folderpath NOT LIKE 'Data Collector%'" Foreach ($pkg in $Packages) { $pkgName = $Pkg.name $folderPath = $Pkg.folderpath $fullfolderPath = "c:\temp\$folderPath\" if(!(test-path -path $fullfolderPath)) { mkdir $fullfolderPath | Out-Null } $pkg.pkg | Out-File -Force -encoding ascii -FilePath "$fullfolderPath\$pkgName.dtsx" } To run it simply change the “localhost” parameter of the server you want to connect to either by editing the script or passing it in when the script is executed. It will create the folder structure in C:\Temp (which you can also easily change if you so wish – just edit the script accordingly). Here’s the folder structure that it created for me: Notice how it is a mirror of the folder structure in [msdb]. Hope this is useful! @Jamiet UPDATE: THis post prompted Chad Miller to write a post describing his Powershell add-in that utilises a SSIS API to do exporting of packages. Go take a read here: http://sev17.com/2011/02/importing-and-exporting-ssis-packages-using-powershell/

  Read the article

• Using Movemail with Thunderbird on Ubuntu

  - by rxt

  I'm trying to read local mail with Thunderbird on Ubuntu (with both 12.04 and 13.04). I've followed the instructions found here: How can I access system mail in /var/mail/ via thunderbird? I can read mail on the system using alpine or vim, so I know the mailbox is not empty. When I click the get-mail button, nothing happens. I see no Inbox (or any folder structure) for the specific account. I've set the rights for /var/mail to 1777. Settings server name: localhost username: john How can I get this working? Okay, considering the extra bounty, I would like to get this working like normal mail. The accepted answer from Qasim resulted in a much more usable situation than before - opening mail in Thunderbird with layout. I still face three problems though. When new mail is received in the mailbox, Thunderbird won't see this until after I restart Thunderbird. When Thunderbird is restarted, all mail is reset to unread and deleted mail is undone. This is probably because Thunderbird reads the mail from the /var/mail/www-data file, but doesn't update this file. So after restarting, it simply reads this file again, with the new mail and all old mail. This is probably a postfix issue: mail is sent out to existing mail addresses, but cannot be delivered because the receiving mailserver cannot be reached. This results in "Undelivered mail returned to sender". Only one mailserver can be reached: localhost. Because this is a test system, I don't want real customers to receive mail. I've blocked mail ports in UFW to be sure. When opening the returned mail, I can scroll down and then I see the original mail with proper layout. So I can read the mail, see if the proper images are included, and for me that's workable. Having to restart TB to read new mail - I know when new mail arrives, so I know when to restart. Having old mail restored after a restart - not big problem as well. I can delete the mail file if it gets too much. I know how it works, but it would be nice if it worked like normal.

  Read the article

• Best practice for marking a bug as resolved in Bugzilla ?

  - by Vincent B.

  I am wondering what is the best way to handle the situation of marking a bug as resolved and providing a version of component/product in which this fix can be found. Context For a project I am working on, we are using Bugzilla for issue tracking, and we have the following: A product "A" with a version number like vA.B.C.D, This product "A" have the following components: Component "C1" with a version number like vA.B.C.D, Component "C2" with a version number like vA.B.C.D, Component "C3" with a version number like vA.B.C.D. Internally we keep track of which component versions have been used to generate the product A version vA.B.C.D. Example: Product "A" version v1.0.0.0 has been produced from component "C1" v1.0.0.3, component "C2" v1.3.0.0 and component "C3" v2.1.3.5. And Product "A" version v1.0.1.0 has been produced from component "C1" v1.0.0.4, component "C2" v1.3.0.0 and component "C3" v2.1.3.5. Each component is a SVN repository. The person in charge of generating the product "A" have only access to the different components tags folder in SVN, and not the trunk of each component repository. Problem Now the problem is the following, when a bug is found in the product "A", and that the bug is related to Component "C1", the version of product "A" is chosen (e.g. v1.0.0.0), and this version allow the developer to know which version of component "C1" has the bug (here it will be v1.0.0.3). A bug report is created. Now let's say that the developer responsible for component "C1" corrects the bug, then when the bug seems to be fixed and after some test and validation, the developer generates a new tag for component "C1", with the version v1.0.0.4. At this time, the developer of component "C1" needs to update the bug report, but what is the best to do: Mark the bug as resolved/fixed and add a comment saying "This bug has been fixed in the tags v1.0.0.4 of C1 component" ? Keep the bug as assigned, add a comment saying "This bug has been fixed in the tags v1.0.0.4 of C1 component, update this bug status to resolved for the next version of the product that will be generated with the newest version (v1.0.0.4 of C1)" ? Another possible way to deal with this problem. Right now the problem is that when a product component CX is fixed, it is not sure in which future version of the product A it will be included, so it is for me not possible to say in which version of the product it will be solved, but it is possible to say in which version of the Component CX it has been solved. So when do we need to mark a bug as solved, when the product A version include the fixed version of CX, or only when CX component has been fixed ? Thanks for your personal feedback and ideas about this !

  Read the article

• Any suggested approaches to track bugs/defects?

  - by deostroll

  What is the best way to track defect sources in tfs? We have various teams for a project like the vulnerability team, the customer, pre-sales, etc. We give a build and these teams independently test it. They do not have access to our tfs system. So they usually send in their defects via email. It will usually be send in an excel format. Our testing team takes these up and logs them into tfs. Sometimes they modify the original defect description (in excel) and add the expected/actual results. Sometimes they miss to cite the source. I am talking about managing the various sources as such. Is there a way we can add these sources into tfs, and actually link this particular source with the defects, with individual comments associated with them (saying where in the source we can find the actual material for the defect). Edit: I don't know if there is a way to manage various sources. Consider this: the vulnerability assessment team has come out with defects/suggestions. They captured it into an excel and passed that on to the testing team (in my case). The testing team takes the responsibility of elaborating the defect and logging it in tfs. Now say that the excel has come with 20 defect items. This is my source. (It answers the question where did this defect come from). So ultimately when I am looking at a bug I know from where it came from - I'll ultimately be looking at the email sent from the VA team which has the excel or the excel file itself sent by the VA team. It may be one of the 20 items in that excel. How should the tester link to this source just once? On the contrary, it does not make sense for the tester to attach the same excel 20 times (i.e. attach the same excel for the 20 defects while logging it into tfs) right? I hope you get my point.

  Read the article

• Oracle Tutor: *** CAUTION to Word .docx Users ***

  - by [email protected]

  Microsoft released a security update KB969604 for Office 2007 (around June 2009) This update causes document variables within Word docx files to be scrambled. This update might still be pushed out via Office 2007 updates DO NOT save files as docx using MS OFFICE 2007 until you apply the MS hotfix # 970942 available here If you are using Windows XP with Office 2003 or Office 2000 and have installed an older Office 2007 compatibility pack, documents saved as docx may also cause the scrambled document variables. Installing the 2007 compatibility pack published on 1/6/2010 (version 4) will prevent the document variables from becoming corrupt. Those on Windows 2000 may not be able to install the latest compatibility pack, or the compatibility pack may not function properly. This situation will hopefully be rectified in the coming months. What is a document variable? Document variables store data inside the document, invisible to the user. The Tutor software uses them when converting the document to HTML and when creating the flowchart, just to name a couple of uses. How will you know if a document's variables are scrambled? The difficulty in diagnosing the issue is that the symptoms can take myriad forms. There isn't a single error message or a single feature that one can point to and say, "test for the problem by doing this." The best clue about the error is seeing any kind of string in an error message that has garbage characters, question marks, xml code snippets, or just nonsense. Such as "Language ?????????????xlr;lwlerkjl could not be found." It is also possible to see the corrupted data in the footers of the Word docs. And, just because the footers look correct does not mean that the document variables are not corrupted. The corruption problem does not occur in every document variable in the document, just some of them. Often it is less than a quarter of them. What is the difference between docx files and doc files? Office 2007 uses Office Open XML formats with .docx and .docm filename extensions. - Docx is an Office Open XML word document. - Docm is a macro enabled Office Open XML document. This means the file structure behind the scenes is quite different from the binary file formats used prior to Office 2007 such as .doc, .dot, .xls, and .ppt. Solution Summary: For Windows XP and Word 2007: Install the hotfix, or save files as *.doc For Windows XP and Word 2000 and 2003: Install the latest compatibility pack or save files as *.doc For Windows 2000 with Word 2000 or 2003, do not use any compatibility pack, save files as *.doc Emily Chorba Principle Product Manager for Oracle Tutor

  Read the article

• Use CSS Selectors with HtmlUnit

  - by kerry

  HtmlUnit is a great library for performing web integration tests in Java.  But sometimes node traversal can be somewhat cumbersome. Fear not fellow automated tester (good for you!).  I found a great little project on Github that will allow you to query your document for elements via css selectors similar to jQuery. The project is located at https://github.com/chrsan/css-selectors.  You can use Maven to build it, or download 1.0.2 here.  Beware.  I will not be updating this link so I suggest you download the latest code. In any case, you can use it like so: // from HtmlUnit getting started final WebClient webClient = new WebClient(); final HtmlPage page = webClient.getPage("http://htmlunit.sourceforge.net"); final DOMNodeSelector cssSelector = new DOMNodeSelector(page.getDocumentElement()); final Set elements = cssSelector.querySelectorAll("div.section h2"); final Node first = elements.iterator().next(); assertThat(first.getTextContent(), equalTo("HtmlUnit")); The only problem here is that the querySelectAll returns a Set<Node>.  Not HtmlElement like we may want in some cases.   However, if you were to reflect on the Set, you would find that it is indeed a Set of HtmlElement objects. Typically, I like to create a base class for my web tests.  Just for fun, I am using the $ method similar to jQuery. public class WebTestBase { protected WebClient webClient; protected HtmlPage htmlPage; protected void goTo(final String url){ return (HtmlPage)webClient.getPage(url); } protected List $(final String cssSelector) { final DOMNodeSelector cssSelector = new DOMNodeSelector(htmlPage.getDocumentElement()); final Set nodes = cssSelector.querySelectorAll("div.section h2"); // for some reason Set cannot be cast to Set? final List elements = new ArrayList(nodes.size()); for (final Node node : nodes) { elements.add((HtmlElement)node); } return elements; } } Now we can write tests like this: public class LoginWebTest extends WebTestBase { @Test public void login_page_has_instructions() throws Exception { goTo(baseUrl + "/login") assertThat( $("p.instructions").size(), equalTo(1) ); } }

  Read the article

• New Source Database Added for EBS 12 + 11gR2 Transportable Tablespaces

  - by John Abraham

  The Transportable Tablespaces (TTS) process was originally certified for the migration of E-Business Suite R12 databases going from a source database of 11gR1 or 11gR2 to a target of 11gR2. This requirement has now been expanded to include a source database of 10gR2 (10.2.0.5) - this will potentially save time for existing 10gR2 customers as they can remove on a crucial upgrade step prior to performing the platform migration. The migration process requires an updated Controlled patch delivered by the Oracle E-Business Suite Platform Engineering team, i.e. it requires a password obtainable from Oracle Support. We released the patch in this manner to gauge uptake, and help identify and monitor any customer issues due to the nature of this technology. This patch has been updated to now include supporting 10gR2 as a source database. Does it meet your requirements?Note that for migration across platforms of the same "endian" format, users are advised to use the Transportable Database (TDB) migration process instead for large databases. The "endian-ness" target platforms can be verified by querying the view V$DB_TRANSPORTABLE_PLATFORM using SQL*Plus (connected as sysdba) on the source platform:SQL>select platform_name from v$db_transportable_platform;If the intended target platform does not appear in the output, it means that it is of a different endian format from the source. Consequently. database migration will need to be performed via Transportable Tablespaces (for large databases) or export/import.The use of Transportable Tablespaces can greatly speed up the migration of the data portion of the database. However, it does not affect metadata, which must still be migrated using export/import. We recommend that users initially perform a test migration on their database, using export/import with the 'metrics=y' parameter. This will help identify the relative amounts of data and metadata, and provide a basis for assessing likely gains in timing. In general, the larger the amount of data (compared to metadata), the greater the reduction in downtime that can be expected from using TTS as a migration process. For smaller databases or for those that have relatively small data compared to metadata, TTS will not be as beneficial for cross endian migration and the use of export/import (datapump) for the whole database is recommended. Where can I find more information? Using Transportable Tablespaces to Migrate Oracle E-Business Suite Release 12 Using Oracle Database 11g Release 2 Enterprise Edition (My Oracle Support Document 1311487.1) Oracle Database Administrator's Guide 11g Release 2 (11.2) Related Articles Database Migration using 11gR2 Transportable Tablespaces Now Certified for EBS 12 New Source Databases Added for Transportable Tablespaces + EBS 11i 10gR2 Transportable Tablespaces Certified for EBS 11i Migrating E-Business Suite Release 11i Databases Between Platforms Migrating E-Business Suite Release 12 Databases Between Platforms

  Read the article

• What is new in Oracle SOA Suite 11g R1 PS6? by Shanny Anoep

  - by JuergenKress

  Oracle has released a new version 11.1.1.7.0 for their Oracle Fusion Middleware product line. This version includes Patch Set #6 (PS6) for Oracle SOA Suite 11g R1, with a big list of improvements and fixes for each component in that suite. In this post we will highlight some of the interesting updates with regards to troubleshooting, performance, reliability and scalability. Infrastructure/Purging scripts Database growth is a common problem for large-scale Oracle SOA Suite deployments. Oracle already provides multiple purging strategies for the SOA Suite runtime database. This patch set includes two new scripts for purging most of the runtime data: Table Recreation Script (TRS): This script can be used to reclaim as much database space as possible, while still retaining the open instances. It can be used as a corrective action for databases that grew excessively, for example when purging was not performed at all. This should be used as a single corrective action only; the script does not replace the normal purging scripts. Truncate script: Remove all records from the SOA Suite runtime tables without dropping the tables. This script can be used for cloning SOA Suite environments without copying the instance data, or for recreating test scenarios by cleaning all the runtime data. The Oracle SOA Suite Administrator's guide contains a table with the available purging strategies. Diagnostic dumps Using WLST you could already dump diagnostic information about various components of the SOA Suite. This version adds support to retrieve more information on BPEL and Adapters from the command-line. Diagnostic dumps for BPEL New diagnostic dumps are available for BPEL to get information on thread pools, average processing time for BPEL components, and average waiting times for asynchronous instances. This information can be very useful for performance analysis or troubleshooting. With WLST this information can be retrieved from the command-line and included for monitoring or reporting. Read the full article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: SOA Suite PS6,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• The Developer's Conference Florianópolis, Brazil

  - by Tori Wieldt

  by guest blogger Yara Senger With over 2900 developers in person and another 2000 online, The Developer's Conference (TDC) in Florianópolis, Brazil, reminds us that Java is BIG in Brazil. The conference included 20 different tracks, and Java was the most popular track. Java was also a big part of the talks in the IoT, Cloud and BigData tracks. Here's my overview (in Brazilian Portguese): Several JUGs were involved in TDC Florianópolis, serving as track leads, speakers and all-around heros, including SouJava SouJava Campinas GUJava Santa Catarina JUG Vale JUG Maringá Java Bahia GOJava (Goinia) JUG Rio do Sul RS Jug (Rio Grande do Sul) and I thank them for their support and commitment. It is a vibrant and fun community! We saw that the IoT space is maturing rapidly. There are already some related to embedded in the region.  Java Evangelist Bruno Borges and Marco Antonio Maciel gave a view popular talk "Java: Tweet for Beer!" They demonstrated how to make a beer tap controlled by Java and connected to the Internet, using a visual application JavaFX with Java SE 8, running on a Rasperry Pi. Of course, they had to test the application quite throughly.   We Brazilians are training the next generation of Java developers. TDC4Kids was as big success. We made a tour with the kids in all booths and almost everybody talked about Java. Java in government managment (Betha), Java on the 2048  (Oracle), Java on the popcorn machine and Java training (Globalcode & V.Office) and of course: Java & Minecraft! OTN's Pablo Ciccarello was there to support the community.  He did several video interviews with JUG leaders and speakers (mine included). You can watch more videos on his TDC Florianópolis playlist.  Thank you, Oracle and OTN for all your support. We interacted with thousands of Java developers at The Developer's Conference Florianópolis. If you want to join us, we are planning two more conferences this year: The Developer's Conference São Paulo, July  The Developer's Conference Porto Alegre, October 

  Read the article

• Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

  - by cengbrecht

  My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

  Read the article

• Automate RAC Cluster Upgrades using EM12c

  - by HariSrinivasan

  One of the most arduous processes  in DB maintenance is upgrading Databases across major versions, especially for complex RAC Clusters.With the release of Database Plug-in  (12.1.0.5.0), EM12c Rel 3 (12.1.0.3.0)  now supports automated upgrading of RAC Clusters in addition to Standalone Databases. This automation includes: Upgrade of the complete Cluster across the nodes. ( Example: 11.1.0.7 CRS, ASM, RAC DB  ->   11.2.0.4 or 12.1.0.1 GI, RAC DB)  Best practices in tune with your operations, where you can automate upgrade in steps: Step 1: Upgrade the Clusterware to Grid Infrastructure (Allowing you to wait, test and then move to DBs). Step 2: Upgrade RAC DBs either separately or in group (Mass upgrade of RAC DB's in the cluster). Standard pre-requisite checks like Cluster Verification Utility (CVU) and RAC checks Division of Upgrade process into Non-downtime activities (like laying down the new Oracle Homes (OH), running checks) to Downtime Activities (like Upgrading Clusterware to GI, Upgrading RAC) there by lowering the downtime required. Ability to configure Back up and Restore options as a part of this upgrade process. You can choose to : a. Take Backup via this process (either Guaranteed Restore Point (GRP) or RMAN) b. Set the procedure to pause just before the upgrade step to allow you to take a custom backup c. Ignore backup completely, if there are external mechanisms already in place.  High Level Steps: Select the Procedure "Upgrade Database" from Database Provisioning Home page. Choose the Target Type for upgrade and the Destination version Pick and choose the Cluster, it picks up the complete topology since the clusterware/GI isn't upgraded already Select the Gold Image of the destination version for deploying both the GI and RAC OHs Specify new OH patch, credentials, choose the Restore and Backup options, if required provide additional pre and post scripts Set the Break points in the procedure execution to isolate Downtime activities Submit and track the procedure's execution status.  The animation below captures the steps in the wizard.  For step by step process and to understand the support matrix check this documentation link. Explore the functionality!! In the next blog, will talk about automating rolling Upgrades of Databases in Physical Standby Data Guard environment using Transient Logical Standby.

  Read the article

• Ubuntu won't suspend automatically any more

  - by Sparhawk

  In the last month or so, Ubuntu (12.04) has stopped sleeping automatically. I've gone to System Settings Power, and verified (and toggled) "suspend on inactive for" to 5 minutes (for both battery and "when plugged in"), but the system stays awake. I've also tried used code similar to $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 300 $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 300 to set the timeout values. I've also verified these in dconf Editor. Previously, I could set this quite low to make my computer sleep quickly, but now it no longer works either. I'm not sure if this is relevant, but under old versions of Ubuntu, if I wanted my computer to never suspend (via the CLI), I would also have to set $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac false At some point, this seemed to have been depreciated (and also gave me the error "No such key 'sleep-inactive-ac'"). I found that it it was enough to set sleep-inactive-ac-timeout to 0. This worked for a while, but at some point auto-suspend stopped working as stated above. Oddly enough, the sleep-inactive-ac key is still present when I look via dconf editor. However, when I click it, it says "no schema", and the summary, etc. fields are blank. To test if the dconf power plugin was working, I tried playing around with other settings in the schema. Idle-dim-time and idle-dim-ac work as expected . However, setting sleep-display-ac to 5 seconds has no effect. I'm also not sure if this is relevant, but I've uninstalled gnome-screensaver, and installed xscreensaver. I have tried killing xscreensaver and re-installing gnome-screensaver, but this did not help. I've also had some trouble with DPMS. I'm not sure if this is related, but I'll put the information here, just in case. Using xscreensaver, I set Power Management to enabled, with standby and suspend timeouts to 10 minutes. I've verified these settings in ~/.xscreensaver and xset q. However, the screen blanks after about 30 seconds. If I turn off DPMS (either via xscreensaver GUI or modifying ~/.xscreensaver), it won't blank at all, so I know that DPMS is partially reading the xscreensaver settings. -- edit I've attempted more troubleshooting, by creating a new user account, then logging out of the main account and into the new account. I've tried modifying the timeouts via dconf, but get the same results as above (i.e. it doesn't work, nor does sleep-display-ac, but idle-dim-time and idle-dim-ac work). Also, the depreciated sleep-display-ac key is not visible, so I think that this is probably unrelated. -- edit I've since moved to gnome-shell instead of unity, and still have this problem, so I guess that it's something to do with gnome-power-manager.

  Read the article

• Smooth animation when using fixed time step

  - by sythical

  I'm trying to implement the game loop where the physics is independent from rendering but my animation isn't as smooth as I would like it to be and it seems to periodically jump. Here is my code: // alpha is used for interpolation double alpha = 0, counter_old_time = 0; double accumulator = 0, delta_time = 0, current_time = 0, previous_time = 0; unsigned frame_counter = 0, current_fps = 0; const unsigned physics_rate = 40, max_step_count = 5; const double step_duration = 1.0 / 40.0, accumulator_max = step_duration * 5; // information about the circ;e (position and velocity) int old_pos_x = 100, new_pos_x = 100, render_pos_x = 100, velocity_x = 60; previous_time = al_get_time(); while(true) { current_time = al_get_time(); delta_time = current_time - previous_time; previous_time = current_time; accumulator += delta_time; if(accumulator > accumulator_max) { accumulator = accumulator_max; } while(accumulator >= step_duration) { if(new_pos_x > 1330) velocity_x = -15; else if(new_pos_x < 70) velocity_x = 15; old_pos_x = new_pos_x; new_pos_x += velocity_x; accumulator -= step_duration; } alpha = accumulator / static_cast<double>(step_duration); render_pos_x = old_pos_x + (new_pos_x - old_pos_x) * alpha; al_clear_to_color(al_map_rgb(20, 20, 40)); // clears the screen al_draw_textf(font, al_map_rgb(255, 255, 255), 20, 20, 0, "current_fps: %i", current_fps); // print fps al_draw_filled_circle(render_pos_x, 400, 15, al_map_rgb(255, 255, 255)); // draw circle // I've added this to test how the program will behave when rendering takes // considerably longer than updating the game. al_rest(0.008); al_flip_display(); // swaps the buffers frame_counter++; if(al_get_time() - counter_old_time >= 1) { current_fps = frame_counter; frame_counter = 0; counter_old_time = al_get_time(); } } I have added a pause during the rendering part because I wanted to see how the code would behave when a lot of rendering is involved. Removing it makes the animation smooth but then I'll have to make sure that I don't let the frame rate drop too much and that doesn't seem like a good solution. I've been trying to fix this for a week and have had no luck so I'd be very grateful if someone can read through my code. Thank you! Edit: I added the following code to work out the actual velocity (pixels per second) of the ball each time the ball is rendered and surprisingly it's not constant so I'm guessing that's the issue. I'm not sure why it's not constant. alpha = accumulator / static_cast<double>(step_duration); render_pos_x = old_pos_x + (new_pos_x - old_pos_x) * alpha; cout << (render_pos_x - old_render_pos) / delta_time << endl; old_render_pos = render_pos_x;

  Read the article

• Ubuntu missing from the Grub menu

  - by varevarao

  Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

  Read the article

• Create Outlook Appointments from PowerShell

  - by BuckWoody

  I've been toying around with a script to create a special set of calendar objects in Outlook that show when my SQL Server Agent Jobs are scheduled to run. I haven't finished yet, but I thought I would share the part that creates the Outlook Appointments.I have yet to fill a variable with the start and end times, and then loop through that to create the appointments. I'm thinking I'll make the script below into a function, and feed it those variables in a loop. The script below creates a whole new Calendar Folder in Outlook called "SQL Server Agent Jobs". I also use categories quite a bit, so you'll see that too. Caution: If you plan to play with this script, do it on an isolated workstation, not on your "regular" Outlook calendar. Otherwise, you'll have lots of appointments in there that you don't care about!  # Add a new calendar item to a new Outlook folder called "SQL Server Agent Jobs" $outlook = new-object -com Outlook.Application $calendar = $outlook.Session.folders.Item(1).Folders.Item("SQL Server Agent Jobs") $appt = $calendar.Items.Add(1) # == olAppointmentItem $appt.Start = [datetime]"03/11/2010 11:00" $appt.End = [datetime]"03/11/2009 12:00" $appt.Subject = "JobName" $appt.Location = "ServerName" $appt.Body = "Job Details" $appt.Categories = "SQL server Agent Job" $appt.Save()   Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Connect Team Foundation Service/TFS 2012 with Visual Studio 2010 &amp; Visual Studio 2008

  - by Vishal

  Hello, Microsoft finally released the Team Foundation Service in late October 2012 after its long time in the preview phase. I was already using the TFS Preview which was free but I was happy to see Microsoft releasing the Team Foundation Service also FREE for upto 5 users. Isn't that great news? I know there are bunch of other free source control repositories (Github, Bitbucket, SVN etc.) out there but I somehow like TFS better. Also the other good thing about the final release was that I didn’t had to do any kind of migration of my code from preview to final release version. Just changed the TFS connection URL and it worked like a charm. Anyways, if you are a startup with small team and need some awesome Source Control along with all the good Project Management, Continuous Integration (Build, Test, Deploy), Team Collaboration, Agile/Scrum planning etc. features than Team Foundation Service is your answer. Microsoft has not yet released their pricing for more than 5 users and will be releasing it sometime in early 2013. What if as of now you have a team more than 5 users and you want to use Team Foundation Service, the good news is you can use it for FREE but when they release the final pricing, you will have to transition to the paid plan. Lot of story, getting to the point, connecting to Team Foundation Service with Visual Studio 2012 is straight forward and would work out of the box but it wont for previous versions of Visual Studio. You will have to upgrade to the latest service pack first and than install the forward compatibility pack. (1st : Service Packs & 2nd: Forward Compatibility packs) For Visual Studio 2010: Visual Studio 2010 Service Pack 1. Visual Studio 2010 forward compatibility for TFS 2012 and Team Foundation Service.         For Visual Studio 2008: Visual Studio 2008 Service Pack 1. Visual Studio 2008 forward compatibility for TFS 2012 & Team Foundation Service. Restart your system. Visual Studio 2008 will not work if you only put https://xxx.visualstudio.com. You will have to put your collection name too as shown below.       By the way, it doesn’t matter if you are an Apple Application Developer or Android App Developer, you can still use Team Foundation Service as your source control. Below are few links to connect to Team Foundation Service with other IDEs: Connect Eclipse to Team Foundation Service. Connect XCode to Team Foundation Service. Happy coding. Vishal Mody

  Read the article

• SharePoint 2010 Hosting :: Sending SMS Alerts in SharePoint 2010 Over Office Mobile Service Protocol (OMS)

  - by mbridge

  In this post, I want to share the exciting news of SharePoint's 2010 new feature. Finally it's possible to send SMS directly from SharePoint to mobile phones. The advantages of sending SMS instead of Email messages are obvious: SMS alerts or reminders that are received on mobile phones are more preferred than Email messages that can be lost in the mass of spam. The interface is standard as it's very similar to previous versions of the product. Adjustments are easy to do, simply enter the address of the Office Mobile Service (OMS) web-service which you want to use for sending messages, then specify the connection parameters. Further details on Office Mobile Service is available below. The Test Service button checks if OMS web-service is accessible using provided URL (user name and password are not verified). This check is needed because OMS web-service URL depends on the mobile operator and country. It's now possible to select the method of sending alerts in alerts settings. Email option is selected by default. Alerts delivery method is displayed in the list of existing alerts. Office Mobile Service (OMS) SharePoint 2010 uses exterior servers similar to SMTP servers for sending SMS alerts. However, Microsoft started development and promotion of their own protocol instead of using existing ones. That is how Office Mobile Service (OMS) appeared. This open protocol enables clients to send text and multimedia messages (mobile messages) remotely to the server which processes these messages and delivers them to mobile phones.  Typical scenario of utilizing this protocol is data transfer between computer application and mobile phone. The recipient can answer messages and the server in return will deliver the answer by SMTP protocol, i.e. by email.  Key quality of this protocol is that it's built on base of HTPP(S) and SOAP protocols.     This means that in fact SMS gateway must support typified web-service. What do you get from web-service? What you get is the ability to send SMS from any platform you want.  The protocol is being developed at the moment and version 0.2 from 08/28/2009 was available when the article was published.  For promotion of their protocol and simplifying server search, Microsoft represented web-service http://messaging.office.microsoft.com/HostingProviders.aspx that helps to receive the list of providers, which supports OMS protocol and message delivery to your operator.  All you need to do is decide which provider to use, complete the agreement, then adjust the SharePoint connection parameters and start working.  Some providers advertise themselves not only for clients but for mobile operators as well. They offer automatic adding to the list of the Office Mobile Service Providers.  To view the full specifications of OMS, please go to http://msdn.microsoft.com/en-us/library/dd774103.aspx.

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves for October 20-26, 2013

  - by OTN ArchBeat

  What are the 4,460 fans of the OTN ArchBeat Facebook Page talking about? The list below represents the Top 10 most popular articles, blog posts, and other content from across the community. Enterprise Grade Deployment Considerations for Oracle Identity Manager AD Connector | Firdaus Fraz Oracle Fusion Middleware solution architect Firdaus Fraz illustrates provides best practice recommendations for setting up an enterprise deployment environment for the OIM connector for Microsoft Active Directory. A Roadmap for SOA Development and Delivery | Mark Nelson Do you know the way to S-O-A? Mark Nelson does. His latest blog post, part of an ongoing series, will help to keep you from getting lost along the way. The road ahead for WebLogic 12c | Edwin Biemond Oracle ACE Edwin Biemond shares his thoughts on announced new features in Oracle WebLogic 12.1.3 & 12.1.4 and compares those upcoming releases to Oracle WebLogic 12.1.2. Oracle GoldenGate 12c - New Release, New Features | Michael Rainey Rittman Mead's Michael Rainey takes you on guided tour through the GoldenGate 12c features that "are relevant to data warehouse and data migration work we typically see in the business intelligence world." Reproducing WebLogic Stuck Threads with ADF CreateInsert Operation and ORDER BY Clause | Andrejus Baranovsikis Another post from Oracle ACE Director Andrejus Baranovsikis on dealing with WebLogic Stuck Threads. This one includes a test case application you can download. The Impact of SaaS - The Times They Are A-Changin' | Floyd Teter Oracle ACE Director Floyd Teter shares some truly interesting insight gained in conversations with three Fortune 500 CIOs. Configure Oracle Identity Manager AD/LDAP Authentication | Arda Eralp A step-by-step how-to from a member of the Fusion Middleware Applications Consultancy team. Java-Powered Robot Named NAO Wows Crowds | Tori Wieldt Tori Wieldt interviews a robot and human. Updated ODI Statement of Direction | Robert Schweighardt Heads up Oracle Data Integrator fans! A new product statement of direction document is available, offering "an overview of the strategic product plans for Oracle’s data integration products for bulk data movement and transformation, specifically Oracle Data Integrator (ODI) and Oracle Warehouse Builder (OWB)." Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration - Part 2: Setup and Configuration | Michael Rainey Michael Rainey continues his series with another technical article for you GoldenGate fans. Thought for the Day "Intuition will tell the thinking mind where to look next." — Jonas Salk, American medical researcher and virologist (October 28, 1914 – June 23, 1995) Source: brainyquote.com

  Read the article

< Previous Page | 714 715 716 717 718 719 720 721 722 723 724 725  | Next Page >