Search Results

Search found 40052 results on 1603 pages for 'android version'.

Page 729/1603 | < Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736  | Next Page >

• Oh snap! My RPi was upgraded to 512MB! Woo-hoo!

  - by hinkmond

  I ordered a Raspberry Pi Model B (256MB) over 4 months ago on backorder. When it finally came I saw it was upgraded to the new half a gig model! Woot! But, all was not perfect. Gary C. told me the shipped configuration of the new RPi models didn't have the right firmware for 512MB, and I had to upgrade the start.elf in the /boot directory to recognize all of the 512MB RAM. I did a "free" command, and sure enough saw only 240MB. Sadness. But, Gary gave me a copy of his start.elf which worked after some trail and error. For anyone ordering the new RPi Model B w/512MB, here are the steps to get you going with full 512MB RAM: sudo apt-get update --fix-missing sudo apt-get upgrade --fix-missing # NOTE: This step takes at least a couple hours on a # fast network wget https://raw.github.com/raspberrypi/firmware/\ 164b0fe2b3b56081c7510df93bc1440aebe45f7e/boot/\ arm496_start.elf sudo mv /boot/start.elf /boot/orig-start.elf sudo mv arm496_start.elf /boot/start.elf sudo reboot free total used free shared buffers cached Mem: 497768 210596 287172 0 16892 169624 -/+ buffers/cache: 24080 473688 Swap: 102396 0 102396 So of course this means... (drumroll) there is now 498MB available for the Java Embedded heap! java -Xmx400m -version java version "1.7.0_06" Java(TM) SE Embedded Runtime Environment (build 1.7.0_06-b24, headless) Java HotSpot(TM) Embedded Client VM (build 23.2-b09, mixed mode) Yeah, baby! Hinkmond

  Read the article

• How to Upgrade Windows 7 Easily (And Understand Whether You Should)

  - by The Geek

  Just the other day I was trying to use Remote Desktop to connect from my laptop in the living room to the desktop downstairs, when I realized that I couldn’t do it because the desktop was running Windows Home Premium—that’s when I realized we’d never covered how to upgrade Windows, so here you are. You can upgrade from any version of Windows to the next version up, but it’s obviously going to cost a bit of money, and there’s a very good chance that you’ll have no reason to upgrade. Keep reading for the differences between the versions, whether you should bother upgrading, and how to actually do it Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Take Better Panoramic Photos with Any Camera Make Creating App Tabs Easier in Firefox Peach and Zelda Discuss the Benefits and Perks of Being Kidnapped [Video] The Life of Gadgets in Price and Popularity [Infographic] Apture Highlights Turns Your Cursor into a Search Tool Add Classic Sci-Fi Goodness to Your Desktop with the Matrix Theme for Windows 7

  Read the article

• What is the program "Additional Drivers" (jockey-gtk) talking me about?

  - by Robert Vila

  The program says: "No proprietary drivers are in use on this system" But it doesn't say if it is talking about graphical drivers only or what. Then, it lists two drivers: NVIDIA accelerated graphics driver (version 173). NVIDIA accelerated graphics driver (version current) [recomended] Both have exactly the same description. What is the difference then? When I select the 1st one, it says: "This river is not activated",and there's a button to "activate" it. When I select the 2nd one, it says: "This river is activated but it is not currently in use", and the button is to "remove". So which one is in use? Why or what for should I have activated (enabled) and not in use? If it is in use it is activated? What is the difference between activate and remove? and what is the relationship between installed, activated, in use, enabled and removed, disabled, inactive and not-installed? Why can I activate the inactivated and remove (but not deactivate) the activated that is not in use? All this is very puzzling... What other drivers can I use for an Apple MacBook pro 3,1 and how? I see that there's a nouveau and I heard that there was going to be a new open source even better. > -display > description: VGA compatible controller > product: G84 [GeForce 8600M GT] > vendor: nVidia Corporation

  Read the article

• Does IE have more strict Javascript parsing than Chrome?

  - by Clay Shannon

  This is not meant to start a religio-technical browser war - I still prefer Chrome, at least for now, but: Because of a perhaps Chrome-related problem with my web page (see https://code.google.com/p/chromium/issues/detail?can=2&start=0&num=100&q=&colspec=ID%20Pri%20M%20Iteration%20ReleaseBlock%20Cr%20Status%20Owner%20Summary%20OS%20Modified&groupby=&sort=&id=161473), I temporarily switched to IE (10) to see if it would also view the time value as invalid. However, I didn't even get to that point - IE stopped me in my tracks before I could get there; but I found that IE was right - it is more particular/precise in validating my code. For example, I got this from IE: SCRIPT5007: The value of the property '$' is null or undefined, not a Function object ...which was referring to this: <script src="/CommonLogin/Scripts/jquery-1.9.1.min.js" type="text/javascript"></script> <script type="text/javascript"> // body sometimes becomes white???? with jquery 1.6.1 $("body").css("background-color", "#405DA7"); < This line is highlighted as the culprit: $("body").css("background-color", "#405DA7"); jQuery is referenced right above it - so why did it consider "$" to be undefined, especially when Chrome had no problem with it...ah! I looked at that location (/CommonLogin/Scripts/) and saw that, sure enough, the version of jQuery there was actually jquery-1.6.2.min.js. I added the updated jQuery file (1.9.1) and it got past this. So now the question is: why does Chrome ignore this? Does it download the referenced version from its own CDN if it can't find it in the place you specify? IE did flag other errs after that, too; so I'm thinking perhaps IE is better at catching lurking problems than, at least, Chrome is. Haven't tested Firefox diesbzg yet.

  Read the article

• Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

  - by Lagerbaer

  On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

  Read the article

• Desktop goes blurry / granulated

  - by Bonfire

  After few minutes using, desktop and fonts in unity-menu goes blurry. See screenshot.! In all applications (browser etc.) graphics seem to be allright. After rebooting problem disappears for few minutes. Changing the wallpaper also makes the desktop clear (for a while) but fonts are still blurry. I have ubuntu 12.04 and windows xp dualbooted. lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) lshw -c video: *-display:0 description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff *-display:1 UNCLAIMED description: Display controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 02 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:40000000-4007ffff Have you got any ideas to get this solved? Thank you very much! Bonfire

  Read the article

• Ubuntu 12.10 won't display properly after kernel upgrade

  - by Daniel

  After updating a system today, Ubuntu's doesn't display correctly. The desktop now looks like this. It was working properly before. I had to use the terminal to run synaptic package manager, so I could view the update history; which is as follows: Commit Log for Wed Nov 7 11:50:36 2012 Upgraded the following packages: linux-image-generic (3.5.0.17.19) to 3.5.0.18.21 Installed the following packages: linux-image-3.5.0-18-generic (3.5.0-18.29) linux-image-extra-3.5.0-18-generic (3.5.0-18.29) Prior to this issue, the last active driver was nvidia-current-updates, version 304.51. I tried using the nvidia-current driver, version 304.51.really.304.43 instead, but the problem persists. I tried running nvidia-settings from terminal, so I could try configuring something, but the application informs that the Nvidia driver is not being used. As the x-swat repository has nothing for Quantal, I desperately used the unstable x-edgers repository & upgraded, but to no avail; so I purged it. The display should normally be full HD, but the only available resolutions now are 1024x768(4:3) and 800x600(4:3). The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen. How can I fix this problem? Update: I tried using the Nouveau third-party driver & this fixes the issue. However, if you have any idea how to get the Nvidia drivers working properly with the latest kernel, please share; as I've noticed some videos playing very slowly on the system, though I'm not sure exactly why.

  Read the article

• Mix10 is in history, Windows Phone 7 is here!

  MIX10was really a fantastic conference for Telerik! We had great talks, many customers stopped by our booth and we've got a lot of great feedback for our Silverlight Controls. Thank you for stopping by and sharing your opinion! So now, that the MIX is over, there is one question left: What Telerik will develop for theWindows Phone 7? We had this question on the booth over and over again and it is no doubt that the WP7 development is a hot topic now. All we can sayat this momentis that Yes, we are looking into this and we actually have some of our controls already partially working with WP7 internally :) You know that the Silverlight version for WP7 is Silverlight 3 and it has some very good additions over it in order to support the phone hardware - like webcam, mic, accelerometer, etc. If you missed the conference and the sessions- here is a list of videos thatwill get you started: Building Windows Phone Applications with Silverlight, Part 1 Mike Harsh Building Windows Phone Applications with Silverlight, Part 2 Peter Torr The good thing isthat our controls will needvery few tweaks in order to be *compiled* against the WP7 Silverlight runtime. But, the more interesting part is actually what are the scenarios that our controls will be used in. How different they will be from the desktop version of the SL? This is where we need your feedback - drop as a line and let us know what are your expectations in this area. Do you need something specific, a feature or a new control that you like to use, or maybe you have a specific scenario that you want to share. Nowthe ball is in your hands - write on the forums, send us a ticket, or just leave your comment on WP7 developmentbelow! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• I'm a SubVersion geek, why I should consider or not consider Mercurial or Git or any other DRCS?

  - by Pierre 303

  I tried to understand the benefits of DRCS. I must recognize I still doesn't get it. Here are my current beliefs. I'm ready to destroy them thanks to your expertise. I know I'm probably resisting to change. I just want to evaluate how much that change will cost me. Merging hell can be solved by just applying good practices such as continuous integration. There is no such good practice than having a private branch for a few days when you are in a self managing team with real collaboration. I use branching for that for very rare cases, and I keep a branch for every major version, in which I fix bugs merged from the trunk. I see the value of committing offline then pushing online. But continuous integration can help on this too. I work on very large projects, and I never noticed SubVersion to be slow even when the server is 5000km away on the internet and my small connection (less than 1024D/128U). Harddisk space is cheap, so having a copy of source code locally doesn't look like a problem to me. I already have a full copy of the last version on my disk. I don't understand the distributed thing there (maybe THIS IS the key to my understanding?) I not new in the industry, and judging by my difficulty to understand, I don't think DRCS are easier to understand than SubVersion like. If fact, I don't understand... Doctor, give me your diagnostic.

  Read the article

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• Best way: restructure an existing Team Foundation Server (TFS) solution

  - by dhh

  In my department we are developing several smaller AddOns for some unified communication server. For versioning and distributed development we use a Team Foundation Server 2012. But: there is only one large TFS solution for all of our applications and libraries: Main Solution Applications App 1 App 2 App 3 Externals Libraries Lib 1 Lib 2 Tools The "Application" path contains all main applications. Those are not depending on each other, but they depend on the Libraries and Externals projects. The "Externals" path contains some external DLLs referenced in our Applications and Libraries. The Libraries path contains commonly used libs (UI templates, Helper classes, etc.). They do not depend on each other and they are referenced in the Libraries and the Tools projects. The Tools path contains some helper programs like setup helpers, update web services, etc. Now, there's some major points why I'd like to change this structure: We can't use server builds. It's uncomfortable to manage TFS scrum management with sprints, impediments, etc. with a solution structure like that. Every developer always has access to all projects in the solution. A complete build lasts too long if one accidentally hits [F6] in Visual Studio... What would you change in this solution? How would you break those projects into smaller Solutions, how should those solutions be structured. My first approach would be, to create one TFS project for each Application, Library and Tool. But how can I ensure that e.g. App 2 always contains the newest version of Lib 1? Do I have to monitor changes on Lib 1 and update App 2 manually as soon as the Lib changes? Or can I somehow force Visual Studio to always use the newest version of an external project somehow?

  Read the article

• LiveCD/USB boot issues with Ubuntu 12.04 on blank drive

  - by Richek

  Not sure how common this issue is, or even how badly I may be missing something simple, but I am a first time usuer having some serious problems. Some background: old HDD running Windows 7 developed too many bad sectors and is bricked. I'm attempting to install Ubuntu 12.04 on a fresh 1TB drive by booting from a liveCD USB flash drive. I've not been able to get past the initial menu screen, however, as the process stalls out shortly after selecting an option (both boot from drive and install to drive). I've tried multiple USB drives as well as CDs, modified the boot order, flashed BIOS, and even tried booting with only the flash drive and the keyboard connected with the same results.Typically what I observe is that the OS begins what I think is compliling, listing drivers and components before freezing on one. When the keyboard is plugged in, its the keyboard driver, before I flashed BIOS, it was a BIOS related item, now its an unknown entry. The computer seems to be reading the drive (idicated by USB light flashing or CD drive reving) for roughly 10 minutes with no progress, followed by the drives going quiet. Some spec info: Motherboard: ASUS P5Q Pro, BIOS version 2102 (latest version), Intel chipset CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz help would be appriciated!

  Read the article

• Driver for asus wireless PC card WL-100GE

  - by emab

  I have bought an Asus wireless LAN PC Card WL-100GE model, and I am using lubuntu on my system. While I have no cable connection, currently I cannot access the internet and update my laptop. Device: Broad Range Wireless Card Bus Adaptor - Asus - WL-100GE I searched the web and couldn't find any adequate driver for it. Is there any solution for it? My sudo lshw -C network output is: *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:02:3f:ba:55:c8 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=128 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:3000(size=256) memory:e0200800-e02008ff *-network description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:07:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:21 memory:38000000-38001fff ----:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• Updated Virtual Machine for VS/TFS 2010

  - by Enrique Lima

  If you had downloaded the previous version of the virtual machines, then you are likely aware they are set to expire soon (12/15/2010). Brian Keller announced yesterday (blog post here) the availability of a vm refresh (new expiration set for 6/1/2011). What is part of the refresh? Here is the excerpt from Brian’s post: “ The version of this virtual machine which was refreshed on December 9, 2010, includes the following additions: · Visual Studio 2010 Feature Pack 2 · Team Foundation Server 2010 Power Tools (September 2010 Release) · Visual Studio 2010 Productivity Power Tools (these are disabled in VS so that the screenshots of the hands-on-labs still match; you can quickly enable the Productivity Power Tools via Tools -> Extension Manager from within Visual Studio) · Test Scribe for Microsoft Test Manager · Visual Studio Scrum 1.0 Process Template · All Windows Updates through December 8, 2010 · Lab Management GDR (KB983578) · Visual Studio 2010 Feature Pack 2 pre-requisite hotfix (KB2403277) · Microsoft Test Manager hotfix (KB2387011) · Minor fit-and-finish fixes based on customer feedback · A new expiration date of June 1, 2011” The links to download the Virtual Machines are: Hyper-V: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e0198b64-4acb-4709-b07f-359fb4d523bc&displaylang=en Windows Virtual PC (Win 7): http://www.microsoft.com/downloads/en/details.aspx?FamilyID=509c3ba1-4efc-42b5-b6d8-0232b2cbb26e&displaylang=en

  Read the article

• StreamInsight V2.0 Released!

  - by Roman Schindlauer

  The StreamInsight Team is proud to announce the release of StreamInsight V2.0! This is the version that ships with SQL 2012, and as such it has been available through Connect to SQL CTP customers already since December. As part of the SQL 2012 launch activities, we are now making V2.0 available to everyone, following our tradition of providing a separate download page. StreamInsight V2.0 includes a number of stability and performance fixes over its predecessor V1.2. Moreover it introduces a dependency on the .NET Framework 4.0, as well as on SQL 2012 license keys. For these reasons, we decided to bump the major version number, even though V2.0 does not add new features or API surface. It can be regarded a stepping stone to the upcoming release 2.1 which will contain significantly new APIs (that will depend on .NET 4.0). Head over here to download StreamInsight V2.0. The updated Books Online can be found here. Update: For instructions on how to make your existing application work against the new bits without recompilation, see here. Regards, The StreamInsight Team

  Read the article

• nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

  - by rlemon

  I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• Why am I getting this error while installing gnome?

  - by Sreehari Rajendran

  i have raring ringtail. I installed gnome a couple days ago. I try to install extensions but the site says I don't have the latest version. I type the command sudo apt-get install gnome-shell and I get this error Reading package lists... Done Building dependency tree Reading state information... Done gnome-shell is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 138 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.103ubuntu0.7) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-25-generic cp: cannot stat ‘/module-files.d/libpango1.0-0.modules’: No such file or directory cp: cannot stat ‘/modules/pango-basic-fc.so’: No such file or directory E: /usr/share/initramfs-tools/hooks/plymouth failed with return 1. update-initramfs: failed for /boot/initrd.img-3.8.0-25-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) why?

  Read the article

• VirtualBox 4.0.10 is now available for download

  - by user12611829

  VirtualBox 4.0.10 has been released and is now available for download. You can get binaries for Windows, OS X (Intel Mac), Linux and Solaris hosts at http://www.virtualbox.org/wiki/Downloads The full changelog can be found here. The high points for the 4.0.10 maintenance release include .... GUI: fixed disappearing settings widgets on KDE hosts (bug #6809) Storage: fixed hang under rare circumstances with flat VMDK images Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated Storage: refuse to create a medium with an invalid variant Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot USB: fixed occasional VM hangs with SMP guests USB: proper device detection on RHEL/OEL/CentOS 5 guests ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests RDP: fixed screen corruption under rare circumstances rdesktop-vrdp: updated to version 1.7.0 OVF: under rare circumstances some data at the end of a VMDK file was not written during export Mac OS X hosts: Lion fixes Mac OS X hosts: GNOME 3 fix Linux hosts: fixed VT-x detection on Linux 3.0 hosts Linux hosts: fixed Python 2.7 bindings in the universal Linux binaries Windows hosts: fixed leak of thread and process handles Windows Additions: fixed bug when determining the extended version of the Guest Additions Solaris Additions: fixed installation to 64-bit Solaris 10u9 guests Linux Additions: RHEL6.1/OL6.1 compile fix Linux Additions: fixed a memory leak during VBoxManage guestcontrol execute Technocrati Tags: Sun Virtualization VirtualBox var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

  Read the article

• In an online questionnaire, what is a best way to design a database for keeping track of users all attempts?

  - by user1990525

  We have a web app where users can take online exams. Exam admin will create a questionnaire. A questionnaire can have many Questions. Each question is a multiple choice question (MCQ). Lets say an admin creates a questionnaire with 10 questions. Users attempt those questions. Now, unlike real exams users can attempt single questionnaire multiple times. And we have to keep track of his all attempts. e.g. User_id Questionnaire_id question_id answer attempt_date attempt_no 1 1 1 a 1 June 2013 1 1 1 2 b 1 June 2013 1 1 1 1 c 2 June 2013 2 1 1 2 d 2 June 2013 2 Now it can also happen that after user has attempted same questionnare twice, admin can delete a question from same questionnaire, but users attempt history should still have reference to that so that user can see his that question in his attempt history in spite of admin deleting that question. If user now attempts this changed questionnaire he should see only 1 question. User_id Questionnaire_id question_id answer attempt_date attempt_no 1 1 1 a 3 June 2013 3 Also, after this user modified some part of question, users attempt history should show question before modification while any new attempt should show modified question. How do we manage this at the database level? My first gut feeling was that, For deletes, do not do physical delete, just make a question inactive so that history can still keep track of users attempt. For modifications, create versions for questions and each new attempt refres to latest version of each question and history keeping reference to version of question at attempt time.

  Read the article

• Lenovo v570 ubuntu 12.04 wireless hard blocked even when ext. switch is on

  - by user100987

  When I run iwconfig it say's lo and eth0 have no wireless extensions, but wlan0 it says IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS the:off Fragment the:off Power Management:off and I believe that's my problem, I just don't know how to turn it back on Any help? When I ran lspci | grep Network it gave me this 02:00.0 Network controller: Intell Corporation Centrino Wireless -N + WiMAX 6150 (rev 67) How I know that my wireless is hard blocked because when I run sudo rfkill list all I get 0: Ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes when I run lshw -c network I get. *-network DISABLED description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: mon1 version: 67 serial: 40:25:c2:d2:96:2c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-32-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: f0:de:f1:d7:a0:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.65 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

  Read the article

• Upgraded from 11.4 to 11.10, There was an error, now the system won't initiialize

  - by Eric

  This morning the system gave me a message that my Version (11.4) was no longer supported, and I took the 'upgrade' option (- 11.10). While installing the various components I encountered a message to the effect that the there was an error and the system may have become unusable. Among the messges: E:Sup-process /usr/bin/dpkg received a segmentation fault...returned an error code (1). I was given an option to do several things, one of which seemed to mean that it would attempt to roll back to the previous version (the default), which I took. After the process ran it said the upgrade process had finished, but there were errors. I attempted to initialize a console so I could enter ubuntu-bug update-manager /var/log/dist-upgrade, per the instructions I received when I received the error message, but the console failed during initialization. I restarted the machine, and the screen has stopped with the following contents: * Starting bluetooth * Stopping save kernel messages * Starting CUPS printing spooler/server * PulseAudio configured per-user sessions saned disabled: edit /etc/default/saned $starting up Cisco VPN daemon *Starting anac(h)ronistic cron *Stopping anac(h)ronistic cron Each of these steps followed by [ OK ] What are my options? Any help appreciated!

  Read the article

• ubuntu 11.10 can't find wireless after waking from sleep

  - by Colleen

  I've tried a lot of proposed solutions, most of them adding files to /etc/pm/config.d, as well as WiFi stops working after waking from suspend and nothing has worked. hardware info: [colleen@colleen-HP ~]$ sudo lshw -C network [sudo] password for colleen: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:b1:ea:67 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:4000(size=256) memory:c1404000-c1404fff memory:c1400000-c1403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 8c:a9:82:99:48:8c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-21-generic-pae firmware=39.31.5.1 build 35138 ip=192.168.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:c5500000-c5501fff Is anyone else still having this problem? The two solutions I haven't tried are installing wicd and upgrading because I've heard both are kind of unstable/buggy and wicd frankly scares me.

  Read the article

< Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736  | Next Page >