Search Results

Search found 19134 results on 766 pages for 'support contract'.

Page 732/766 | < Previous Page | 728 729 730 731 732 733 734 735 736 737 738 739  | Next Page >

• Certificate Trusts Lists in IIS7

  - by BrettRobi

  I am trying to enable mutual authentication for my WebService hosted in IIS7. I have the server side cert setup and working but cannot figure out how to get a Certificate Trust List created and setup in IIS7 so that I can require and validate client side certificates. All of my client side certs are signed by my own root cert so I need to create a CTL that contains just my root cert and then have IIS validate client provided certs against the CTL. Can anyone shed some light on how to do this? IIS6 had a UI for assigning a CTL, but I can find nothing similar in IIS7. Update: I have now successfully used MakeCTL in wizard mode to create a CTL with a Friendly Name. However I don't have adsutil support on my IIS7 box so via other posts elsewhere I am trying to use the 'netsh http add sslcert' command to assign the CTL to my site. Before I could use this command I had to remove the existing SSL cert that was assigned to my site for server authentication. Then in my netsh command I specify the thumbprint of that very same SSL cert I removed, plus a made up appid, plus 'sslctlidentifier=MyCTL sslctlstorename=CA'. The resulting command is: netsh http add sslcert ipport=10.10.10.10:443 certhash=adfdffa988bb50736b8e58a54c1eac26ed005050 appid={ffc3e181-e14b-4a21-b022-59fc669b09ff} sslctlidentifier=MyCTL sslctlstorename=CA (the IP addr is munged), but I am getting this error: SSL Certificate add failed, Error: 1312 A specified logon session does not exist. It may already have been terminated. I am sure the error is related to the CTL options because if I remove them it works (though no CTL is assigned of course). Can anyone help me take this last step and make this work? UPDATE 01-07-2010: I never resolved this with IIS 7.0 and have since migrated our app to IIS 7.5 and am giving this another try. Per the response from Taras Chuhay I installed IIS6 Compatibility on my test server and tried the steps he documented using adsutil.vbs (which can also be found here). I immediately ran into this error: ErrNumber: -2147023584 Error trying to SET the Property: SslCtlIdentifier when running this command: adsutil.vbs set w3svc/1/SslCtlIdentifier MyFriendlyName I then went on to try the next adsutil.vbs command documented and it failed with the same error. I have verified that the CTL I created has a Friendly Name of MyFriendlyName and that it exists in the 'Intermediate Certification Authorities\Certificate Trust List' store of LocalComputer. So once again I am at a dead standstill. I don't know what else to try. Has anyone ever gotten CTL's to work with IIS7 or 7.5? Ever? Am I beating a DEAD horse. Google turns up nothing but my own posts and other similar stories. Update 2/23/10 - I've confirmed with Microsoft that this is a bug with IIS 7.5, but it does work with IIS 7. Check out this link for details: http://viisual.net/configuration/IIS7-CTLs.htm Update 6/08/10 - I can now confirm that KB981506 resolves this issue. There is a patch associated with this KB that must be applied to Server 2008 R2 machines to enable this functionality. Once that is installed all works flawlessly for me.

  Read the article

• GeoIP and Nginx

  - by JavierMartinez

  I have a nginx with geoip, but it is not working rightly. The issue is the next: Nginx are getting geodata from $_SERVER['REMOTE_ADDR'] instead of $_SERVER['HTTP_X_HAPROXY_IP'], which have the real client ip. So, the reported geodata belongs to my server ip instead of client ip. Does anybody where could be the error to fix it? Nginx version and compiled modules: nginx -V nginx version: nginx/1.2.3 TLS SNI support enabled configure arguments: --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log- path=/var/log/nginx/error.log --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --lock-path=/var/lock/nginx.lock --pid-path=/var/run/nginx.pid --with-pcre-jit --with-debug --with-file-aio --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_realip_module --with-http_secure_link_module --with-http_stub_status_module --with-http_ssl_module --with-http_sub_module --with-http_xslt_module --with-ipv6 --with-sha1=/usr/include/openssl --with-md5=/usr/include/openssl --with-mail --with-mail_ssl_module --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-auth-pam --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-echo --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-upstream-fair --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-dav-ext-module --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-syslog --add-module=/usr/src/nginx/source/nginx-1.2.3/debian/modules/nginx-cache-purge nginx site conf (frontend machine) server { root /var/www/storage; server_name ~^.*(\.)?mydomain.com$; if ($host ~ ^(.*)\.mydomain\.com$) { set $new_host $1.mydomain.com; } if ($host !~ ^(.*)\.mydomain\.com$) { set $new_host www.mydomain.com; } add_header Staging true; real_ip_header X-HAProxy-IP; set_real_ip_from 10.5.0.10/32; location /files { expires 30d; if ($uri !~ ^/files/([a-fA-F0-9]+)_(220|45)\.jpg$) { return 403; } rewrite ^/files/([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9][a-fA-F0-9])([a-fA-F0-9]+)_(220|45)\.jpg$ /files/$1/$2/$3/$4/$1$2$3$4$5_$6.jpg break; try_files $uri @to_backend; } location /assets { if ($uri ~ ^/assets/r([a-zA-Z0-9]+[^/])(/(css|js|fonts)/.*)) { rewrite ^/assets/r([a-zA-Z0-9]+[^/])/(css|js|fonts)/(.*)$ /assets/$2/$3 break; } try_files $uri @to_backend; } location / { proxy_set_header Host $new_host; proxy_set_header X-HAProxy-IP $remote_addr; proxy_pass http://10.5.0.10:8080; } location @to_backend { proxy_set_header Host $new_host; proxy_pass http://10.5.0.10:8080; } } nginx.conf (backend machine) http{ ... ## # GeoIP Config ## geoip_country /etc/nginx/geoip/GeoIP.dat; # the country IP database geoip_city /etc/nginx/geoip/GeoLiteCity.dat; # the city IP database ... } fastcgi_params (backend machine) ### SET GEOIP Variables ### fastcgi_param GEOIP_COUNTRY_CODE $geoip_country_code; fastcgi_param GEOIP_COUNTRY_CODE3 $geoip_country_code3; fastcgi_param GEOIP_COUNTRY_NAME $geoip_country_name; fastcgi_param GEOIP_CITY_COUNTRY_CODE $geoip_city_country_code; fastcgi_param GEOIP_CITY_COUNTRY_CODE3 $geoip_city_country_code3; fastcgi_param GEOIP_CITY_COUNTRY_NAME $geoip_city_country_name; fastcgi_param GEOIP_REGION $geoip_region; fastcgi_param GEOIP_CITY $geoip_city; fastcgi_param GEOIP_POSTAL_CODE $geoip_postal_code; fastcgi_param GEOIP_CITY_CONTINENT_CODE $geoip_city_continent_code; fastcgi_param GEOIP_LATITUDE $geoip_latitude; fastcgi_param GEOIP_LONGITUDE $geoip_longitude; haproxy.conf (frontend machine) defaults log global option forwardfor option httpclose mode http retries 3 option redispatch maxconn 4096 contimeout 100000 clitimeout 100000 srvtimeout 100000 listen cluster_webs *:8080 mode http option tcpka option httpchk option httpclose option forwardfor balance roundrobin server backend-stage 10.5.0.11:80 weight 1 $_SERVER dump: http://paste.laravel.com/7dy Where 10.5.0.10 is frontend private ip and 10.5.0.11 backend private ip

  Read the article

• Installing PhotoShop CS5 in windows XP error: (when up to 12% of the installation);

  - by Croplio

  Error Log: ---------- Exit Code: 6 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 43 error(s), 41 warning(s) WARNING: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification: Family: Photoshop ProductName: Adobe Photoshop CS5 Core_x64 This parent relationship is not satisfied, because this payload is not present in this session. WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure WARNING: Payload cannot be installed due to dependent operation failure ERROR: The following payload errors were found during install: ERROR: - Adobe CSXS Infrastructure CS5: Install failed ERROR: - Microsoft_VC90_ATL_x86: Install failed ERROR: - Adobe Media Player: Install failed ERROR: - Microsoft_VC90_CRT_x86: Install failed ERROR: - Adobe Photoshop CS5 Support: Install failed ERROR: - Adobe Bridge CS5: Install failed ERROR: - Microsoft_VC80_ATL_x86: Install failed ERROR: - DeviceCentral_DeviceCentral3LP-zh_CN: Install failed ERROR: - Adobe XMP Panels CS5: Install failed ERROR: - Photoshop Camera Raw: Install failed ERROR: - AdobeColorCommonSetCMYK: Install failed ERROR: - Adobe Mini Bridge CS5: Install failed ERROR: - Adobe Photoshop CS5 Chinese Language Pack_AdobePhotoshop12-zh_CN: Install failed ERROR: - Adobe ReviewPanel CS5: Install failed ERROR: - Microsoft_VC90_MFC_x86: Install failed ERROR: - Suite Shared Configuration CS5: Install failed ERROR: - Adobe Linguistics CS5: Install failed ERROR: - DeviceCentral: Failed due to Language Pack installation failure ERROR: - AdobeColorEU CS5: Install failed ERROR: - AdobeTypeSupport CS5: Install failed ERROR: - AdobeColorVideoProfilesCS CS5: Install failed ERROR: - AdobeColorCommonSetRGB: Install failed ERROR: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure ERROR: - Adobe CSXS Extensions CS5: Install failed ERROR: - AdobeOutputModule: Install failed ERROR: - Microsoft_VC80_CRT_x86: Install failed ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed ERROR: - AdobePDFL CS5: Install failed ERROR: - AdobeCMaps CS5: Install failed ERROR: - AdobeColorNA CS5: Install failed ERROR: - Required Common Fonts Installation: Install failed ERROR: - Adobe SwitchBoard 2.0: Install failed ERROR: - Microsoft_VC80_MFC_x86: Install failed ERROR: - AdobeColorPhotoshop CS5: Install failed ERROR: - Microsoft_VC80_MFCLOC_x86: Install failed ERROR: - PDF Settings CS5: Install failed ERROR: - Recommended Common Fonts Installation: Install failed ERROR: - Adobe Extension Manager CS5: Install failed ERROR: - AdobeColorJA CS5: Install failed ERROR: - AdobeJRE: Install failed ERROR: - Adobe ExtendScript Toolkit CS5: Install failed ERROR: - Adobe AIR: Install failed ------------------------------------------------------------------------------------- I hava tried many time and the issue is still there, any help will be appriciated, thanks!

  Read the article

• Roaming user profile issues on Server 2008

  - by Alicia White

  I thought I cleared a user's profile from 2008, but it keeps coming back. So, I was looking for the best way to clear a roaming profile in Server 2008, but I have been unable to find anything. But, I did see the post here: http://serverfault.com/questions/18724/user-profile-keeps-loading-temp-profile I wanted to add a comment to that post, but it was closed as not being related to sysadmin. But, I think it IS related because I dealt with precisely this same problem on our Wndows 2008 terminal server. Here was the issue: we have a user who was getting an "unable to load your roaming profile" type of error at logon in Windows 2008. Looking at the server, we could see her temp profile listed in the profile list while she was loggged (listed as a "temporary" and not a "roaming" profile). While she was logged on, a folder called C:\Users\Temp.DOMAIN existed in the users folder, but that disappeared as soon as she logged out. When this thing happened in 2003, we would clear the contents of the roaming profile folder & delete the temp folder in C:\Documents and Settings. The thing is, 2008 behaves a bit differently. Server 2008 created a new roaming profile folder in the roaming profile folder share: \SERVER\ProfileShare\UserName.V2 The local profile disappears from the profile list in System Properties, so there is no profile to clear Also the local profile folder, C:\Users\Temp.DOMAIN doesn't stay on the server when the user logs out, so we can't delete that as we would normally do when this sort of thing happens in Windows 2003 Despite all of this, every time the user logs back on, the frickin' Temp profile always comes back. One of my team-mates, who is much more experienced with 2008, said I should check the registry for the user's profile in this key (the users are listed by SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList I saw the user's SID listed there, but it ended in .BAK. I checked several other servers where she is having the same profile errors: in all cases, her SID ended with .BAK. For example (xxx replacing the LONG SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak On the server she was logged on to, there were two keys for her profile in the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak So, here is how I cleared up the issue. I had the user log off. I deleted the apparently bad profiles ending in .BAK from the ProfileList key on each server where it appeared. I made sure her roaming profile folder was empty I made sure that all the TEMP profile folders were gone The user logged back on: no more profile errors! Anyway, I wanted to make a comment on that closed question, but I didn't see any way to re-open the question so I could add it. But, I also would like to know if this is the best practice to clear out a bad roaming profile for Server 2008? I'm having a hard time finding any instructions on line on how best to do this, but this method I used seemed to work. I'd like to find some documentation to give to our Level 1 support staff so they will know how to clear user profiles on 2008 since this seems to be more involved that clearing user profiles in server 2003. Thanks, Alicia

  Read the article

• Bypass BIOS password set by faulty Toshiba firmware on Satellite A55 laptop?

  - by Brian

  How can the CMOS be cleared on the Toshiba Satellite A55-S1065? I have this 7 year old laptop that has been crippled by a glitch in its BIOS: 'A "Password =" prompt may be displayed when the computer is turned on, even though no power-on password has been set. If this happens, there is no password that will satisfy the password request. The computer will be unusable until this problem is resolved. [..] The occurrence of this problem on any particular computer is unpredictable -- it may never happen, but it could happen any time that the computer is turned on. [..] Toshiba will cover the cost of this repair under warranty until Dec 31, 2010.' -Toshiba As they stated, this machine is "unusable." The escape key does not bypass the prompt (nor does any other key), thus no operating system can be booted and no firmware updates can be installed. After doing some research, I found solutions that have been suggested for various Toshiba Satellite models afflicted by this glitch: "Make arrangements with a Toshiba Authorized Service Provider to have this problem resolved." -Toshiba (same link). Even prior to the expiration of Toshiba's support ("repair under warranty until Dec 31, 2010"), there have been reports that this solution is prohibitively expensive, labor charges accruing even when the laptop is still under warranty, and other reports that are generally discouraging: "They were unable to fix it and the guy who worked on it said he couldn’t find the jumpers on the motherboard to clear the BIOS. I paid $39 for my troubles and still have the password problem." - Steve. Since the costs of the repairs can now exceed the value of the hardware, it would seem this is a DIY solution, or a non-solution (i.e. the hardware is trash). Build a Toshiba parallel loopback by stripping and soldering the wires on a DB25 plug to connect connect these pins: 1-5-10, 2-11, 3-17, 4-12, 6-16, 7-13, 8-14, 9-15, 18-25. -CGSecurity. According to a list of supported models on pwcrack, this will likely not work for my Satellite A55-1065 (as well as many other models of similar age). -pwcrack Disconnect the laptop battery for an extended period of time. Doesn't work, laptop sat in a closet for several years without the battery connected and I forgot about the whole thing for awhile. The poor thing. Clear CMOS by setting the proper jumper setting or by removing the CMOS (RTC) battery, or by short circuiting a (hidden?) jumper that looks like a pair of solder marks -various sources for various Satellite models: Satellite A105: "you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little solder squares (approx 1/16") at this location" -kerneltrap Satellite 1800: "Underneath the RAM there is black sticker, peel off the black sticker and you will reveal two little solder marks which are actually 'jumpers'. Very carefully hold a flat-head screwdriver touching both points and power on the unit briefly, effectively 'shorting' this circuit." -shadowfax2020 Satellite L300: "Short the B500 solder pads on the system board." -Lester Escobar Satellite A215: "Short the B500 solder pads on the system board." -fixya Clearing the CMOS could resolve the issue, but I cannot locate a jumper or a battery on this board. Nothing that looks remotely like a battery can be removed (everything is soldered). I have looked closely at the area around the memory and do not see any obvious solder pads that could be a secret jumper. Here are pictures (click for full resolution) : Where is the jumper (or solder pads) to short circuit and wipe the CMOS on this board? Possibly related questions: Remove Toshiba laptop BIOS password? Password Problem Toshiba Satellite..

  Read the article

• gallery2 and nginx with rewrite return file not found for file name with space (or + sign in url)

  - by Vangel

  I have setup nginx with gallery2 on an internal server. Everything works fine under apache2 which I checked first, it used to be on apache2 Problem is: gallery2 seems to generate url with + sign in it for file names/ images which had spaces in it so a file like "may report.jpg" becomes "may+report.jpg" The URL rewrite works but gallery2 throws an error for file not found. THis does not happen under apache2. Here is my nginx rewrite rule: location / { index main.php index.html; default_type text/html; # If the file exists as a static file serve it # directly without running all # the other rewite tests on it if (-f $request_filename) { break; } } location /v/ { # if ($request_uri !~ /main.php) # { rewrite ^/v/(.*)$ /main.php?g2_view=core.ShowItem&g2_path=$1 last; # } } location /d/ { if ($request_uri !~ /main.php) { rewrite ^/d/([0-9]+)-([0-9]+)/(.*)$ /main.php?g2_view=core.DownloadItem&g2_itemId=$1&g2_serialNumber=$2&g2_fileName=$3 last; } } location ~ \.php$ { fastcgi_pass 127.0.0.1:8889; fastcgi_index main.php; fastcgi_intercept_errors on; # to support 404s for PHP files not found fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; fastcgi_param SERVER_NAME $host; fastcgi_read_timeout 300; } the sit on its own works fine. only the images with spaces in file name do not display in album view and also when clicking the the image for full page view will throw this error Error (ERROR_MISSING_OBJECT) : Parent 103759 path report+april+456.flv in modules/core/classes/helpers/GalleryFileSystemEntityHelper_simple.class at line 98 (GalleryCoreApi::error) in modules/core/classes/GalleryCoreApi.class at line 1853 (GalleryFileSystemEntityHelper_simple::fetchChildIdByPathComponent) in modules/core/classes/helpers/GalleryFileSystemEntityHelper_simple.class at line 53 (GalleryCoreApi::fetchChildIdByPathComponent) in modules/core/classes/GalleryCoreApi.class at line 1804 (GalleryFileSystemEntityHelper_simple::fetchItemIdByPath) in modules/rewrite/classes/RewriteSimpleHelper.class at line 45 (GalleryCoreApi::fetchItemIdByPath) in ??? at line 0 (RewriteSimpleHelper::loadItemIdFromPath) in modules/rewrite/classes/RewriteUrlGenerator.class at line 103 in modules/rewrite/classes/parsers/modrewrite/ModRewriteUrlGenerator.class at line 37 (RewriteUrlGenerator::_onLoad) in init.inc at line 147 (ModRewriteUrlGenerator::initNavigation) in main.php at line 180 in main.php at line 94 in main.php at line 83 System Information Gallery version 2.2.4 PHP version 5.3.6 fpm-fcgi Webserver nginx/0.8.55 Database mysqli 5.0.95 Toolkits ImageMagick, Thumbnail, Gd Operating system Linux CentOS-55-64-minimal 2.6.18-274.18.1.el5 #1 SMP Thu Feb 9 12:45:44 EST 2012 x86_64 Browser Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.52 Safari/536.5 In the report above there is usable system information if that helps. I know the nginx is old but it comes as default in centos repo and I am not sure if upgrading will fix the problem or break something else it seems gallery2 must map the + to space internally but why it's not doing so with nginx I can't tell. EDIT: I just verified that if I change the '+' sign to %20 then gallery2 works. but gallery2 is generating URL as +. I found a (maybe) related problem here for IIS7 and Gallery2 http://forums.asp.net/t/1431951.aspx EDIT2: Accessing the URL without rewrite and having the + sign works. Must be something to do with rewrite. Here is the relevant apache2 rule that might be of help RewriteCond %{THE_REQUEST} /d/([0-9]+)-([0-9]+)/([^/?]+)(\?.|\ .) RewriteCond %{REQUEST_URI} !/main\.php$ RewriteRule . /main.php?g2_view=core.DownloadItem&g2_itemId=%1&g2_serialNumber=%2&g2_fileName=%3 [QSA,L] RewriteCond %{THE_REQUEST} /v/([^?]+)(\?.|\ .) RewriteCond %{REQUEST_URI} !/main\.php$ RewriteRule . /main.php?g2_path=%1 [QSA,L]

  Read the article

• Play music on iPhone through computer

  - by Kyle Cronin

  Now that I've had my iPhone for a few months, I'm trying an experiment to see if I can't replace the laptop I carry around with my iPhone + internet connected computer. To this end, I've been trying to find a program that will let me play the music on my iPhone through the hardware and software on the host computer. If I recall correctly this was possible a few years ago with the iPod - Linux software like Rhythmbox and Banshee was able to read the music off an iPod and play it through the speakers. I even thought I recalled iTunes itself being capable of this at one time. Now, however, iTunes greys out/disables the music on my iPhone and I can't find any documented support for the iPhone in any other music program. Is this really no longer possible? Am I limited to using the headphone jack to get music to play? (note: I am using an iPhone 3G with the 3.0 software. I am attempting to play music on computers other than the one I sync with) Several replies mention that I should check "manually manage" to do this. I just tried this on a computer that I don't sync my iPhone to and it asked me to erase and sync, which is obviously something I don't want to do. update: OK, I checked the "Manually manage music and videos" box on a computer that I didn't sync to (now known as "Computer A"), and it told me that I needed to erase & sync to cause the changes to have effect, so I did. At this point I'm guessing that my iPhone thinks that it's syncing with that computer. I copied over a few songs using the autofill feature. At this point, Computer A sees the maybe 10 or so songs I've copied using autofill. I then plug my iPhone into my Macbook ("Computer B") which I've been syncing with. At this point, I'm pretty sure that it still thought that all my synced content was still on my iPhone. The "manually manage music and videos" checkbox isn't checked, so I check it and go through a similar process where iTunes erases the synced content and I copy over a playlist. At this point, there's no trace of the songs that I copied over from Computer A. So I plug my iPhone into Computer A - in the Music section are the handful of songs that I had copied over earlier, greyed out and unplayable. To make sure that this wasn't some sort of caching issue, I plugged my iPhone into my sister's Macbook ("Computer C") and it lists the same few, greyed out songs that I had copied over from Computer A. Plugging into Computer B doesn't reveal these songs at all, only the songs that it copied over (these are playable). A few things: This inconsistent behavior is driving me insane. Why would my iPhone report two versions of its contents to different computers? Is there a way to get a computer to completely forget about an iPhone and just resync everything to get everything into a consistent state? Even if I get the phone into a consistent state, I still can't play the files on my phone anywhere but the computer I sync with, which was my original goal. What am I doing wrong? maybe I should read the fine print before I mess with my iPhone So going over this thread with a fine-toothed comb again yields this lovely tidbit in the Apple docs: Note: Even when manually managing, some content may only be available from one library at time. This includes all content on iPhone and video content on iPods. OK, so manually managing is a dead end on the iPhone. Are there any other options? Any unofficial third-party programs or drivers that will work?

  Read the article

• mono 3.0.2 + xsp + lighttpd delivers empty page

  - by Nefal Warnets

  I needed MVC 4 (and basic .NET 4.5) support so I downloaded mono 3.0.2 and deployed it on an lighttpd 1.4.28 installation, together with xsp-2.10.2 (was the latest I could find). After going through the config tutorials I managed to get the fastcgi server to spawn, but all pages are served empty. even if I go to nonexistant urls or direct .aspx files I get an empty HTTP 200 response. The log file on Debug shows nothing suspicious. Here is the log: [2012-12-12 15:15:38Z] Debug Accepting an incoming connection. [2012-12-12 15:15:38Z] Debug Record received. (Type: BeginRequest, ID: 1, Length: 8) [2012-12-12 15:15:38Z] Debug Record received. (Type: Params, ID: 1, Length: 801) [2012-12-12 15:15:38Z] Debug Record received. (Type: Params, ID: 1, Length: 0) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_SOFTWARE = lighttpd/1.4.28) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_NAME = xxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (GATEWAY_INTERFACE = CGI/1.1) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_PORT = 80) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_ADDR = xxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (REMOTE_PORT = xxx) [2012-12-12 15:15:38Z] Debug Read parameter. (REMOTE_ADDR = xxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (SCRIPT_NAME = /ViewPage1.aspx) [2012-12-12 15:15:38Z] Debug Read parameter. (PATH_INFO = ) [2012-12-12 15:15:38Z] Debug Read parameter. (SCRIPT_FILENAME = /data/htdocs/ViewPage1.aspx) [2012-12-12 15:15:38Z] Debug Read parameter. (DOCUMENT_ROOT = /data/htdocs) [2012-12-12 15:15:38Z] Debug Read parameter. (REQUEST_URI = /ViewPage1.aspx) [2012-12-12 15:15:38Z] Debug Read parameter. (QUERY_STRING = ) [2012-12-12 15:15:38Z] Debug Read parameter. (REQUEST_METHOD = GET) [2012-12-12 15:15:38Z] Debug Read parameter. (REDIRECT_STATUS = 200) [2012-12-12 15:15:38Z] Debug Read parameter. (SERVER_PROTOCOL = HTTP/1.1) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_HOST = xxxxx) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_CONNECTION = keep-alive) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_CACHE_CONTROL = max-age=0) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_USER_AGENT = Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.95 Safari/537.11) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT = text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT_ENCODING = gzip,deflate,sdch) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT_LANGUAGE = en-US,en;q=0.8) [2012-12-12 15:15:38Z] Debug Read parameter. (HTTP_ACCEPT_CHARSET = ISO-8859-1,utf-8;q=0.7,*;q=0.3) [2012-12-12 15:15:38Z] Debug Record received. (Type: StandardInput, ID: 1, Length: 0) [2012-12-12 15:15:38Z] Debug Record sent. (Type: EndRequest, ID: 1, Length: 8) lighttpd config: server.modules += ( "mod_fastcgi" ) include "conf.d/mono.conf" $HTTP["host"] !~ "^vdn\." { $HTTP["url"] !~ "\.(jpg|gif|png|js|css|swf|ico|jpeg|mp4|flv|zip|7z|rar|psd|pdf|html|htm)$" { fastcgi.server += ( "" => (( "socket" => mono_shared_dir + "fastcgi-mono-server", "bin-path" => mono_fastcgi_server, "bin-environment" => ( "PATH" => mono_dir + "bin:/bin:/usr/bin:", "LD_LIBRARY_PATH" => mono_dir + "lib:", "MONO_SHARED_DIR" => mono_shared_dir, "MONO_FCGI_LOGLEVELS" => "Debug", "MONO_FCGI_LOGFILE" => mono_shared_dir + "fastcgi.log", "MONO_FCGI_ROOT" => mono_fcgi_root, "MONO_FCGI_APPLICATIONS" => mono_fcgi_applications ), "max-procs" => 1, "check-local" => "disable" )) ) } } the referenced mono.conf index-file.names += ( "index.aspx", "default.aspx" ) var.mono_dir = "/usr/" var.mono_shared_dir = "/tmp/" var.mono_fastcgi_server = mono_dir + "bin/" + "fastcgi-mono-server4" var.mono_fcgi_root = server.document-root var.mono_fcgi_applications = "/:." The document root for this server is /data/htdocs. The asp.net files reside there. lighttpd error logs show nothing. Every help is greatly appreciated!

  Read the article

• SQL Server (2012 Enterprise) Browser service failing

  - by Watki02

  SQL Server (2012 Enterprise) Browser service failing I have a problem as described below: I have an instance of SQL Server 2012 Enterprise (thanks to MSDN) for local development on my PC. I try to start SQL server Browser Service from SQL Server Configuration Manager and it takes a long time to fail, then fails with: The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details. I checked event logs and found these errors in this order (all within the same 1-second time frame): The SQL Server Browser service port is unavailable for listening, or invalid. The SQL Server Browser service was unable to establish SQL instance and connectivity discovery. The SQL Server Browser is enabling SQL instance and connectivity discovery support. The SQL Server Browser service was unable to establish Analysis Services discovery. The SQL Server Browser service has started. The SQL Server Browser service has shutdown. I checked firewall rules and both port 1433 (TCP) and 1434 (UDP) are wide open, just as well - the programs and service binary had been "allowed through windows firewall". I started the "Analysis Services" service by hand and it works fine. Browser still won't start. Some History: Installed SQL 2008 R2 express advanced Installed SQL2012 Express advanced Uninstalled SQL 2008 R2 express advanced Installed 2012 SSDT and lots of features with Express install Installed a unique instance of SQL 2012 Enterprise with all features Uninstalled SSDT and reinstalled SSDT with Enterprise (solved a different problem) Uninstalled SQL 2012 Express Uninstalled SQL 2012 Enterprise Removed anything with "SQL" in the name from Control panel "Programs and features" Installed SQL 2012 Enterprise without Analysis services (This is where I noticed SQL Browser service was failing to start even on the install) Added the feature of Analysis Services (and everything else) via the installer (Browser continued to fail to start on the install) ======================== Other interesting facts: opening a command window with administrator and trying to run sqlbrowser.exe manually yielded: Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Windows\system32cd C:\Program Files (x86)\Microsoft SQL Server\90\Shared C:\Program Files (x86)\Microsoft SQL Server\90\Sharedsqlbrowser.exe -c SQLBrowser: starting up in console mode SQLBrowser: starting up SSRP redirection service SQLBrowser: failed starting SSRP redirection services -- shutting down. SQLBrowser: starting up OLAP redirection service SQLBrowser: Stopping the OLAP redirector C:\Program Files (x86)\Microsoft SQL Server\90\Shared As I try to repair the install it errors out saying The following error has occurred: Service 'SQLBrowser' start request failed. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x4F9BEA51%25400xD3BEBD98%25401211%25401 Clicking retry fails every time. When clicking cancel I get: The following error has occurred: SQL Server Browser configuration for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' was cancelled by user after a previous installation failure. The last attempted step: Starting the SQL Server Browser service 'SQLBrowser', and waiting for up to '900' seconds for the process to complete. . For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x4F9BEA51%25400xD3BEBD98%25401211%25401 When I go to uninstall the SQL Browser from "Programs and Features", it complains: Error opening installation log file. Verify that the specified log file location exists and is writable. Is there any way I can fix this short of re-imaging my computer and reinstalling from scratch? A possible approach would be to somehow really uninstall everything and delete all files related to SQL... is that a good idea, and how do I do that?

  Read the article

• Hosting a subversion working copy in an remote WebDAV folder

  - by Daniel Baulig

  This might be a bit awkward, but I'll try to explain what I am trying to achieve and what problems I encountered. First of all: whats this about? I am currently trying to set up a distributed working enviroment for developing a web page. My plan was to setup a SVN repository for version control, a live server where the actual live page ist hosted and a development server where I can work on the page. To ease things I intended to not have a local copy of the project on my disk, but to actually work directy on the files, that the development server hosts. For that I setup a WebDAV directory, under devserver.com/workspace, that actually mapped to files served under devserver.com/. So I could connect to devserver.com/workspace, change something and view the results live at devserver.com/. So far this worked perfectly. The next step was to create a SVN repository that would take care of my version control. I intended to be able to checkin to the reposiroty from my development server and at any time, with a small shell script, deploy any revision from the svn to the live server by checking out a copy of the revision into the live server directories. The second part, checking out into the live server, also worked perfectly. The first part though is where problems arose: My workstation is a Windows 7 machine. I connected to the WebDAV share using Windows built-in WebDAV support, which worked quite well. I can create, move, delete, edit, whatever files on my WebDAV share from my Windows machine perfectly. The next step was to checkout a working copy from the SVN (actually hosted at devserver.com/subversion/) into the WebDAV share. In the first try I used the Eclipse plugin subversive. The actual checkout worked fine and I can update and commit stuff to the repository, however, I cannot add any files to the ignore list. It always brings me an error. So I tried the same thing with a complete fresh repository using TortoiseSVN - and again it failed with the same errors. Here is what it says when trying to add files to svnignore: Some of selected resources were not added to ignore. svn: Cannot rename file '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props.66fd8936-2701-0010-bb76-472f0b56a5d1.tmp' to '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props' This is what apache2 tells me, when I try to add a file to svnignore: [Sun Mar 07 03:54:19 2010] [error] [client xxx.xxx.xxx.xxx] Negotiation: discovered file(s) matching request: /var/www/devserver.com/.svn/tmp/dir-props (None could be negotiated). [Sun Mar 07 03:54:31 2010] [error] [client xxx.xxx.xxx.xxx] (20)Not a directory: The URL contains extraneous path components. The resource could not be identified. [400, #0] Actually both messages are repeated several times. The first one occurs first and is repeated about 5 times and the second comes there after and is repeated propably more than 20 times. If I create a regular file, delete, rename or modify it none of those messages appear in my error.log While writing this question now I was able to add fils to svnignore using TortoiseSVN. However, after that, Eclipse would not let me commit anymore. The error that used to pop up when adding files to svnignore now also shows up while commiting. While searching the web I found some people having this same message appearing because they had files only different in upper- / lower-case naming. I checked my repository and did not find such files. I also read somewhere about people having troubles with WebDAV and file locking, because WebDAV's file locking capabilities seem to be very limited. At some stage I got errors telling me my repository was locked and thus the operations could not be completed. This error though did not appear anymore, since I setup a completely fresh repository and working copy. I would really appreciate any help anyone can provide me in fixing this problem! If there are any more questions feel free to ask. I know this is a somewhat unusual setup. Best regards, Daniel

  Read the article

• Squid w/ SquidGuard fails w/ "Too few redirector processes are running"

  - by DKNUCKLES

  I'm trying to implement a Squid proxy in a quick and easy fashion and I'm receiving some errors I have been unable to resolve. The box is a pre-made appliance, however it seems to fail on launch.The following is the cache.log file when I attempt to launch the squid service. 2012/11/18 22:14:29| Starting Squid Cache version 3.0.STABLE20-20091201 for i686 -pc-linux-gnu... 2012/11/18 22:14:29| Process ID 12647 2012/11/18 22:14:29| With 1024 file descriptors available 2012/11/18 22:14:29| Performing DNS Tests... 2012/11/18 22:14:29| Successful DNS name lookup tests... 2012/11/18 22:14:29| DNS Socket created at 0.0.0.0, port 40513, FD 8 2012/11/18 22:14:29| Adding nameserver 192.168.0.78 from /etc/resolv.conf 2012/11/18 22:14:29| Adding nameserver 8.8.8.8 from /etc/resolv.conf 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'bin' processes 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'squid-auth.pl' processes 2012/11/18 22:14:29| User-Agent logging is disabled. 2012/11/18 22:14:29| Referer logging is disabled. 2012/11/18 22:14:29| Unlinkd pipe opened on FD 23 2012/11/18 22:14:29| Swap maxSize 10240000 + 8192 KB, estimated 788322 objects 2012/11/18 22:14:29| Target number of buckets: 39416 2012/11/18 22:14:29| Using 65536 Store buckets 2012/11/18 22:14:29| Max Mem size: 8192 KB 2012/11/18 22:14:29| Max Swap size: 10240000 KB 2012/11/18 22:14:29| Version 1 of swap file with LFS support detected... 2012/11/18 22:14:29| Rebuilding storage in /opt/squid3/var/cache (DIRTY) 2012/11/18 22:14:29| Using Least Load store dir selection 2012/11/18 22:14:29| Set Current Directory to /opt/squid3/var/cache 2012/11/18 22:14:29| Loaded Icons. 2012/11/18 22:14:29| Accepting HTTP connections at 10.0.0.6, port 3128, FD 25. 2012/11/18 22:14:29| Accepting ICP messages at 0.0.0.0, port 3130, FD 26. 2012/11/18 22:14:29| HTCP Disabled. 2012/11/18 22:14:29| Ready to serve requests. 2012/11/18 22:14:29| Done reading /opt/squid3/var/cache swaplog (0 entries) 2012/11/18 22:14:29| Finished rebuilding storage from disk. 2012/11/18 22:14:29| 0 Entries scanned 2012/11/18 22:14:29| 0 Invalid entries. 2012/11/18 22:14:29| 0 With invalid flags. 2012/11/18 22:14:29| 0 Objects loaded. 2012/11/18 22:14:29| 0 Objects expired. 2012/11/18 22:14:29| 0 Objects cancelled. 2012/11/18 22:14:29| 0 Duplicate URLs purged. 2012/11/18 22:14:29| 0 Swapfile clashes avoided. 2012/11/18 22:14:29| Took 0.02 seconds ( 0.00 objects/sec). 2012/11/18 22:14:29| Beginning Validation Procedure 2012/11/18 22:14:29| WARNING: redirector #1 (FD 9) exited 2012/11/18 22:14:29| WARNING: redirector #2 (FD 10) exited 2012/11/18 22:14:29| WARNING: redirector #3 (FD 11) exited 2012/11/18 22:14:29| WARNING: redirector #4 (FD 12) exited 2012/11/18 22:14:29| Too few redirector processes are running FATAL: The redirector helpers are crashing too rapidly, need help! Squid Cache (Version 3.0.STABLE20-20091201): Terminated abnormally. CPU Usage: 0.112 seconds = 0.032 user + 0.080 sys Maximum Resident Size: 0 KB Page faults with physical i/o: 0 Memory usage for squid via mallinfo(): total space in arena: 2944 KB Ordinary blocks: 2857 KB 6 blks Small blocks: 0 KB 0 blks Holding blocks: 1772 KB 8 blks Free Small blocks: 0 KB Free Ordinary blocks: 86 KB Total in use: 4629 KB 157% Total free: 86 KB 3% The "permission denied" area is where I have been focusing my attention with no luck. The following is what I've tried. Chmod'ing the /opt/squidguard/bin folder to 777 Changing the user that squidguard runs under to root / nobody / www-data / squid3 Tried changing ownership of the /opt/squidguard/bin folder to all names listed above after assigning that user to run with squid. Any help with this would be greatly appreciated.

  Read the article

• Error on installing SVN extension with pecl

  - by thedp

  Hello, I'm trying to install the following PHP extension: http://php.net/manual/en/book.svn.php But when I do pecl install svn-beta I receive an error message that it can't locate the svn_client.h file. I searched the net but couldn't find any useful reference to this error. Thank you for your help. Installation result: root@myUbuntu:/home/thedp# pecl install svn-beta downloading svn-0.5.1.tgz ... Starting to download svn-0.5.1.tgz (23,563 bytes) .....done: 23,563 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 1. Please provide the prefix of Subversion installation : autodetect 1-1, 'all', 'abort', or Enter to continue: 1. Please provide the prefix of the APR installation used with Subversion : autodetect 1-1, 'all', 'abort', or Enter to continue: building in /var/tmp/pear-build-root/svn-0.5.1 running: /tmp/pear/temp/svn/configure --with-svn --with-svn-apr checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc and cc understand -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 checking for PHP extension directory... /usr/lib/php5/20060613+lfs checking for PHP installed headers prefix... /usr/include/php5 checking for re2c... no configure: WARNING: You will need re2c 0.12.0 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for svn support... yes, shared checking for specifying the location of apr for svn... yes, shared checking for svn includes... configure: error: failed to find svn_client.h ERROR: `/tmp/pear/temp/svn/configure --with-svn --with-svn-apr' failed

  Read the article

• How do I determine if my controller is in IDE or AHCI mode in Linux?

  - by philcolbourn

  I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

  Read the article

• Gmail and Live are making all messages from my server as spam.

  - by Ryan Kearney

  I'm getting very weird results here. When my server sends an email to my @hotmail or @gmail account, it's marked as spam. When I send email through my server from Outlook to @hotmail, it doesn't get marked as spam, but it still gets marked as spam in gmail. They seem to get through fine on Yahoo though. My servers hostname A record points to an IP address whose PTR record points back to the same domain name. The TXT record has a SPF record in it to allow email to be sent from that servers IP. I moved from a VPS to a Dedicated server when this started to happen. From what I can see, the email headers are identical. Here's one of my email headers that gmail marks as spam. Some fields were repalced. MYGMAILACCOUNT is the email address of the account the email was addressed to. USER is the name of the account on the system it was sent from HOSTNAME is the servers FQDN IPADDR is the IP Address of the Hostname MYDOMAIN is my domain name Delivered-To: MYGMAILACCOUNT Received: by 10.220.77.82 with SMTP id f18cs263483vck; Sat, 27 Feb 2010 23:58:02 -0800 (PST) Received: by 10.150.16.4 with SMTP id 4mr3886702ybp.110.1267343881628; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Return-Path: <USER@HOSTNAME> Received: from HOSTNAME (HOSTNAME [IPADDR]) by mx.google.com with ESMTP id 17si4604419yxe.134.2010.02.27.23.58.01; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) client-ip=IPADDR; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) smtp.mail=USER@HOSTNAME Received: from USER by HOSTNAME with local (Exim 4.69) (envelope-from <USER@HOSTNAME>) id 1Nle2K-0000t8-Bd for MYGMAILACCOUNT; Sun, 28 Feb 2010 02:57:36 -0500 To: Ryan Kearney <MYGMAILACCOUNT> Subject: [Email Subject] MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: webmaster@MYDOMAIN Message-Id: <E1Nle2K-0000t8-Bd@HOSTNAME> Sender: <USER@HOSTNAME> Date: Sun, 28 Feb 2010 02:57:36 -0500 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - HOSTNAME X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [503 500] / [47 12] X-AntiAbuse: Sender Address Domain - HOSTNAME Anyone have any ideas as to why all mail leaving my server gets marked as spam? EDIT: I already used http://www.mxtoolbox.com/SuperTool.aspx to check if my servers IP's are blacklisted and they are in fact not. That's what I thought at first, but it isn't the case. Update Mar 1, 2010 I received the following email from Microsoft Thank you for writing to Windows Live Hotmail Domain Support. My name is * and I will be assisting you today. We have identified that messages from your IP are being filtered based on the recommendations of the SmartScreen filter. This is the spam filtering technology developed and operated by Microsoft and is built around the technology of machine learning. It learns to recognize what is and isn't spam. In short, we filter incoming emails that look like spam. I am not able to go into any specific details about what these filters specifically entail, as this would render them useless. E-mails from IPs are filtered based upon a combination of IP reputation and the content of individual emails. The reputation of an IP is influenced by a number of factors. Among these factors, which you as a sender can control, are: The IP's Junk Mail Reporting complaint rate The frequency and volume in which email is sent The number of spam trap account hits The RCPT success rate So I'm guessing it has to do with the fact that I got an IP address with little or no history in sending email. I've confirmed that I'm not on any blacklists. I'm guessing it's one of those things that will work itself out in a month or so. I'll post when I hear more.

  Read the article

• How do I achieve lossless JPEG joining without truncation of partial MCUs?

  - by Karan

  I am working on a project for which I need to join thousands of JPEG images losslessly (I'm not talking about the Lossless JPEG/JPEG 2000/JPEG-LS formats here). Aforementioned images have varying levels of chroma subsampling (1x1, 1x2, 2x1, 2x2), resulting in varying MCU sizes (8x8, 8x16, 16x8, 16x16 px). However, in any given set of images to be joined together, each image has identical characteristics. For now, let's assume I only have 2 images. Image #1 (I1) is 256x256px in size and #2 (I2) is 239x256px in size. 2x2 subsampling is used such that MCU size is 16x16px. I2 thus obviously has partial MCUs at the right edge, since its width is not evenly divisible by 16. (I've read that so-called 'partial' MCUs actually contain the data for a complete MCU, but the image dimensions instruct the renderer to only display the relevant pixels and ignore/hide the extra ones.) Looking around for tools that could help me accomplish this, I came across a modified version of JpegTran, that contains an experimental lossless crop 'n' drop (cut & paste) feature. All the other apps I encountered that support lossless JPEG editing seem to utilise IJG's (JpegTran) code, so this seemed to be the logical choice. Also, given the sheer number of images, I wanted something that could preferably be run from the command-line so that I could automate the process with a script. Unfortunately, while everything else worked fine, it seems JpegTran truncates the partial MCUs instead of retaining them. Thus in the example above, the final joined image contains all of I1, but only 224x256px of I2. Why 224? because 239 = 14x16+15, which means there are 14 full MCUs along the width, and 1 partial MCU (just 1px short of the complete 16px). The last 15px is what is getting blanked, leading to a 495x256px image with 15px of blank (grey) pixels at the right edge. See images below (shame that imgur re-compresses them): (left )+ (right) = As you can clearly see, the red portion (15px) of I2 has been truncated by JpegTran. If the MCUs were 8px in width, the lost portion would have been the right-most 7px of I2. Similarly, joining I3 (256x239px) *below * I1 would cause the loss of 7 or 15px, depending on the MCU height of course: (top) + (bottom) = If this is better suited to some other StackExchange (or even non-SE) site/forum where JPEG/image encoding experts hang out, do let me know. Can what I am attempting even be done, or is the so-called 'lossless' JPEG crop 'n' drop only valid for images with no partial MCUs? (Maybe that is why the feature is still in an "experimental state" more than a decade after being introduced...) Until I know for sure that it is impossible, I am not interested in suggestions for lossy joining. Avoiding any generational loss whatsoever is the sole reason why I'm breaking my head over this, else I'd have had this done and dusted ages ago. Also, I am not interested in suggestions related to switching image formats. I do not control the source of the images. If it can be done, how? Please keep in mind that any alternate apps suggested must ideally be capable of automation, given the requirements stated above. (But given how it's unlikely I'm even going to receive a useful answer given the constraints, I would be happy with any app suggestion just as long as it actually works. I can always look into an AutoIT/AHK script or something later to automate it.) I understand that an odd-sized final image might cause issues, so I am fully prepared to accept any solution, even if it results in blank (preferably black) padding pixels to the right/bottom. What I mean is, I don't care if I1 + I2 is 496x256px (1px padding) or even 512x256px (17px padding) in size, as long as the final image contains all the actual image data from both source images, and the entire process is lossless. Obviously the lesser the padding (if any), the better, but at this point any solution will do. A Windows-based solution would be perfect, but a Linux-based one would be entirely acceptable.

  Read the article

• Managing access to multiple linux system

  - by Swartz

  A searched for answers but have found nothing on here... Long story short: a non-profit organization is in dire need of modernizing its infrastructure. First thing is to find an alternatives to managing user accounts on a number of Linux hosts. We have 12 servers (both physical and virtual) and about 50 workstations. We have 500 potential users for these systems. The individual who built and maintained the systems over the years has retired. He wrote his own scripts to manage it all. It still works. No complaints there. However, a lot of the stuff is very manual and error-prone. Code is messy and after updates often needs to be tweaked. Worst part is there is little to no docs written. There are just a few ReadMe's and random notes which may or may not be relevant anymore. So maintenance has become a difficult task. Currently accounts are managed via /etc/passwd on each system. Updates are distributed via cron scripts to correct systems as accounts are added on the "main" server. Some users have to have access to all systems (like a sysadmin account), others need access to shared servers, while others may need access to workstations or only a subset of those. Is there a tool that can help us manage accounts that meets the following requirements? Preferably open source (i.e. free as budget is VERY limited) mainstream (i.e. maintained) preferably has LDAP integration or could be made to interface with LDAP or AD service for user authentication (will be needed in the near future to integrate accounts with other offices) user management (adding, expiring, removing, lockout, etc) allows to manage what systems (or group of systems) each user has access to - not all users are allowed on all systems support for user accounts that could have different homedirs and mounts available depending on what system they are logged into. For example sysadmin logged into "main" server has main://home/sysadmin/ as homedir and has all shared mounts sysadmin logged into staff workstations would have nas://user/s/sysadmin as homedir(different from above) and potentially limited set of mounts, a logged in client would have his/her homedir at different location and no shared mounts. If there is an easy management interface that would be awesome. And if this tool is cross-platform (Linux / MacOS / *nix), that will be a miracle! I have searched the web and so have found nothing suitable. We are open to any suggestions. Thank you. EDIT: This question has been incorrectly marked as a duplicate. The linked to answer only talks about having same homedirs on all systems, whereas we need to have different homedirs based on what system user is currently logged into(MULTIPLE homedirs). Also access needs to be granted only to some machinees not the whole lot. Mods, please understand the full extent of the problem instead of merely marking it as duplicate for points...

  Read the article

• How Do I Enable My Ubuntu Server To Host Various SSL-Enabled Websites?

  - by Andy Ibanez

  Actually, I Have looked around for a few hours now, but I can't get this to work. The main problem I'm having is that only one out of two sites works. I have my website which will mostly be used for an app. It's called atajosapp.com . atajosapp.com will have three main sites: www.atajosapp.com <- Homepage for the app. auth.atajosapp.com <- Login endpoint for my API (needs SSL) api.atajosapp.com <- Main endpoint for my API (needs SSL). If you attempt to access api.atajosapp.com it works. It will throw you a 403 error and a JSON output, but that's fully intentional. If you try to access auth.atajosapp.com however, the site simply doesn't load. Chrome complains with: The webpage at https://auth.atajosapp.com/ might be temporarily down or it may have moved permanently to a new web address. Error code: ERR_TUNNEL_CONNECTION_FAILED But the website IS there. If you try to access www.atajosapp.com or any other HTTP site, it connects fine. It just doesn't like dealing with more than one HTTPS websites, it seems. The VirtualHost for api.atajosapp.com looks like this: <VirtualHost *:443> DocumentRoot /var/www/api.atajosapp.com ServerName api.atajosapp.com SSLEngine on SSLCertificateFile /certificates/STAR_atajosapp_com.crt SSLCertificateKeyFile /certificates/star_atajosapp_com.key SSLCertificateChainFile /certificates/PositiveSSLCA2.crt </VirtualHost> auth.atajosapp.com Looks very similar: <VirtualHost *:443> DocumentRoot /var/www/auth.atajosapp.com ServerName auth.atajosapp.com SSLEngine on SSLCertificateFile /certificates/STAR_atajosapp_com.crt SSLCertificateKeyFile /certificates/star_atajosapp_com.key SSLCertificateChainFile /certificates/PositiveSSLCA2.crt </VirtualHost> Now I have found many websites that talk about possible solutions. At first, I was getting a message like this: _default_ VirtualHost overlap on port 443, the first has precedence But after googling for hours, I managed to solve it by editing both apache2.conf and ports.conf. This is the last thing I added to ports.conf: <IfModule mod_ssl.c> NameVirtualHost *:443 # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here NameVirtualHost *:443 Listen 443 </IfModule> Still, right now only api.atajosapp.com and www.atajosapp.com are working. I still can't access auth.atajosapp.com. When I check the error log, I see this: Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366) I don't know what else to do to make both sites work fine on this. I purchased a Wildcard SSL certificate from Comodo that supposedly secures *.atajosapp.com, so after hours trying and googling, I don't know what's wrong anymore. Any help will be really appreciated. EDIT: I just ran the apachectl -t -D DUMP_VHOSTS command and this is the output. Can't make much sense of it...: root@atajosapp:/# apachectl -t -D DUMP_VHOSTS apache2: Could not reliably determine the server's fully qualified domain name, using atajosapp.com for ServerName [Thu Nov 07 02:01:24 2013] [warn] NameVirtualHost *:443 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:443 is a NameVirtualHost default server api.atajosapp.com (/etc/apache2/sites-enabled/api.atajosapp.com:1) port 443 namevhost api.atajosapp.com (/etc/apache2/sites-enabled/api.atajosapp.com:1) port 443 namevhost auth.atajosapp.com (/etc/apache2/sites-enabled/auth.atajosapp.com:1) *:80 is a NameVirtualHost default server atajosapp.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost atajosapp.com (/etc/apache2/sites-enabled/000-default:1)

  Read the article

• Postfix - Gmail - Mountain Lion // can't send mail

  - by miako

  I have read most of the tutorials found on google but still can't make it work. I run the command : date | mail -s "Test" [email protected] . The log is this : Oct 22 11:38:00 XXX.local postfix/master[288]: daemon started -- version 2.9.2, configuration /etc/postfix Oct 22 11:38:00 XXX.local postfix/pickup[289]: 9D85418A031: uid=501 from=<me> Oct 22 11:38:00 XXX.local postfix/cleanup[291]: 9D85418A031: message-id=<[email protected]> Oct 22 11:38:00 XXX.local postfix/qmgr[290]: 9D85418A031: from=<[email protected]>, size=327, nrcpt=1 (queue active) Oct 22 11:38:00 XXX.local postfix/smtp[293]: initializing the client-side TLS engine Oct 22 11:38:02 XXX.local postfix/smtp[293]: setting up TLS connection to smtp.gmail.com[173.194.70.109]:587 Oct 22 11:38:02 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: TLS cipher list "ALL:!EXPORT:!LOW:+RC4:@STRENGTH:!eNULL" Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:before/connect initialization Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:SSLv2/v3 write client hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=2 verify=0 subject=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA Oct 22 11:38:03 --- last message repeated 1 time --- Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=1 verify=1 subject=/C=US/O=Google Inc/CN=Google Internet Authority G2 Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=0 verify=1 subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=smtp.gmail.com Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server certificate A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server done A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write client key exchange A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write change cipher spec A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 flush data Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server session ticket A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: subject_CN=smtp.gmail.com, issuer_CN=Google Internet Authority G2, fingerprint E4:CA:10:85:C3:53:00:E6:A1:D2:AC:C4:35:E4:A2:10, pkey_fingerprint=D6:06:2E:15:AF:DF:E9:50:A5:B4:E2:E4:C5:2E:F9:BA Oct 22 11:38:03 XXX.local postfix/smtp[293]: Untrusted TLS connection established to smtp.gmail.com[173.194.70.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 22 11:38:03 XXX.local postfix/smtp[293]: 9D85418A031: to=<[email protected]>, relay=smtp.gmail.com[173.194.70.109]:587, delay=3.4, delays=0.26/0.13/2.8/0.26, dsn=5.5.1, status=bounced (host smtp.gmail.com[173.194.70.109] said: 530-5.5.1 Authentication Required. Learn more at 530 5.5.1 http://support.google.com/mail/bin/answer.py?answer=14257 s3sm54097220eeo.3 - gsmtp (in reply to MAIL FROM command)) Oct 22 11:38:04 XXX.local postfix/cleanup[291]: D4D2F18A03C: message-id=<[email protected]> Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: from=<>, size=2382, nrcpt=1 (queue active) Oct 22 11:38:04 XXX.local postfix/bounce[297]: 9D85418A031: sender non-delivery notification: D4D2F18A03C Oct 22 11:38:04 XXX.local postfix/qmgr[290]: 9D85418A031: removed Oct 22 11:38:04 XXX.local postfix/local[298]: D4D2F18A03C: to=<[email protected]>, relay=local, delay=0.11, delays=0/0.08/0/0.02, dsn=2.0.0, status=sent (delivered to mailbox) Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: removed Oct 22 11:39:00 XXX.local postfix/master[288]: master exit time has arrived I am really confused as i have never setup MTA again an i need it for local web development. I don't use XAMPP. I use the built in Servers. Can anyone guide me?

  Read the article

• Determining cause of high NFS/IO utilization without iotop

  - by Matt

  I have a server that is doing an NFSv4 export for user's home directories. There are roughly 25 users (mostly developers/analysts) and about 40 servers mounting the home directory export. Performance is miserable, with users often seeing multi-second lags for simple commands (like ls, or writing a small text file). Sometimes the home directory mount completely hangs for minutes, with users getting "permission denied" errors. The hardware is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for the home directories. What I find curious, and suspicious, is that the sda device often has very high utilization, even though it only contains the OS. I would expect this virtual drive to be idle almost all the time. The system is not swapping, according to "free" and "vmstat". Why would there be major load on this device? Here is a 30-second snapshot from iostat: Time: 09:37:28 AM Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 44.09 0.03 107.76 0.13 607.40 11.27 0.89 8.27 7.27 78.35 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 44.09 0.03 107.76 0.13 607.40 11.27 0.89 8.27 7.27 78.35 sdb 0.00 2616.53 0.67 157.88 2.80 11098.83 140.04 8.57 54.08 4.21 66.68 sdb1 0.00 2616.53 0.67 157.88 2.80 11098.83 140.04 8.57 54.08 4.21 66.68 dm-0 0.00 0.00 0.03 151.82 0.13 607.26 8.00 1.25 8.23 5.16 78.35 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 0.67 2774.84 2.80 11099.37 8.00 474.30 170.89 0.24 66.84 dm-3 0.00 0.00 0.67 2774.84 2.80 11099.37 8.00 474.30 170.89 0.24 66.84 Looks like iotop is the ideal tool to use to sniff out these kinds of issues. But I'm on CentOS 5.6, which doesn't have a new enough kernel to support that program. I looked at Determining which process is causing heavy disk I/O?, and besides iotop, one of the suggestions said to do a "echo 1 /proc/sys/vm/block_dump". I did that (after directing kernel messages to tempfs). In about 13 minutes I had about 700k reads or writes, roughly half from kjournald and the other half from nfsd: # egrep " kernel: .*(READ|WRITE)" messages | wc -l 768439 # egrep " kernel: kjournald.*(READ|WRITE)" messages | wc -l 403615 # egrep " kernel: nfsd.*(READ|WRITE)" messages | wc -l 314028 For what it's worth, for the last hour, utilization has constantly been over 90% for the home directory drive. My 30-second iostat keeps showing output like this: Time: 09:36:30 PM Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 6.46 0.20 11.33 0.80 71.71 12.58 0.24 20.53 14.37 16.56 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 6.46 0.20 11.33 0.80 71.71 12.58 0.24 20.53 14.37 16.56 sdb 137.29 7.00 549.92 3.80 22817.19 43.19 82.57 3.02 5.45 1.74 96.32 sdb1 137.29 7.00 549.92 3.80 22817.19 43.19 82.57 3.02 5.45 1.74 96.32 dm-0 0.00 0.00 0.20 17.76 0.80 71.04 8.00 0.38 21.21 9.22 16.57 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 687.47 10.80 22817.19 43.19 65.48 4.62 6.61 1.43 99.81 dm-3 0.00 0.00 687.47 10.80 22817.19 43.19 65.48 4.62 6.61 1.43 99.82

  Read the article

• MySQL my.cnf file not being read, Ubuntu 10.04 64bit

  - by reallyordinary

  I've been researching this for a few hours with no luck. Basically it looks like my server's my.cnf file isn't being read at all. I've searched my server, and there's only one my.cnf file on it, located at /etc/mysql/my.cnf. Its ownership is root:root. I'm running Ubuntu 10.04 64bit on a Linode.com server. I have the latest versions of MySQL and PHP installed. I've edited the my.cnf file, commented out "skip-innodb", and have set innodb to be the default storage engine using default-storage-engine = innodb And then restarted mysql. But when I do show engines, MyISAM is still coming up as the default engine. Also - none of the innodb settings I've added to the my.cnf file are being read. For example, I have this in my.cnf: innodb_buffer_pool_size=4G But in phpmyadmin, InnoDB is showing as having a buffer pool size of 8,192 KiB. Similarly, I have this in the my.cnf: innodb_data-file_path = ibdata1:500M:autoextend But in phpmyadmin, it's reading as ibdata1:10M:autoextend. It doesn't look like MyISAM info is being read from the my.cnf file either. The my.cnf file has skip-external-locking queried out, but it's showing as "on" in phpmyadmin. So - yeah, it looks like nothing in the my.cnf file is being read at all. But the server still works. I'm running a Drupal site on it and it seems to operate fine. So mysql seems to be drawing default settings from... some mysterious secret location. Any idea how I can make mysql see and use this my.cnf file? Actually, wait - it looks like it may be being read, not sure. I checked the error.log and found this: 101128 4:28:52 [ERROR] Cannot find or open table databasename/cache_apachesolr from the internal data dictionary of InnoDB though the .frm file for the table exists. Maybe you have deleted and recreated InnoDB data files but have forgotten to delete the corresponding .frm files of InnoDB tables, or you have moved .frm files to another database? or, the table contains indexes that this version of the engine doesn't support. See http://dev.mysql.com/doc/refman/5.1/en/innodb-troubleshooting.html how you can resolve the problem. InnoDB: Error: auto-extending data file ./ibdata1 is of a different size InnoDB: 640 pages (rounded down to MB) than specified in the .cnf file: InnoDB: initial 32000 pages, max 0 (relevant if non-zero) pages! InnoDB: Could not open or create data files. InnoDB: If you tried to add new data files, and it failed here, InnoDB: you should now edit innodb_data_file_path in my.cnf back InnoDB: to what it was, and remove the new ibdata files InnoDB created InnoDB: in this failed attempt. InnoDB only wrote those files full of InnoDB: zeros, but did not yet use them in any way. But be careful: do not InnoDB: remove old data files which contain your precious data! 101128 4:28:52 [ERROR] Plugin 'InnoDB' init function returned error. 101128 4:28:52 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 101128 4:28:52 [ERROR] /usr/sbin/mysqld: unknown variable 'innodb_lock_wait_timout=50' 101128 4:28:52 [ERROR] Aborting 101128 4:28:52 [Note] /usr/sbin/mysqld: Shutdown complete

  Read the article

• Having problems with high CPU usage and apparent memory leak of Exim

  - by Dancrumb

  I'm having problems with my server and am hoping you can help. The culprit appears to be exim. The CPU usage is consistently high and the memory usage trends up and up and up for no apparent reason (this is not a heavily used server). To demonstrate the issue, I ran the following: root@server [/var/log]# service exim restart; for iter in `seq 0 9`; do date; top -n1 | grep exim; sleep 10; done Shutting down exim: [ OK ] Shutting down spamd: [ OK ] Starting exim: [ OK ] Sun Jun 6 18:12:07 CDT 2010 62592 root 25 0 11400 6572 2356 R 51.5 1.3 0:00.92 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim Sun Jun 6 18:12:18 CDT 2010 62592 root 25 0 28768 23m 2356 R 57.4 4.6 0:06.75 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:28 CDT 2010 62592 root 25 0 36408 30m 2356 R 55.5 6.0 0:12.59 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:39 CDT 2010 62592 root 25 0 41396 35m 2356 R 53.5 7.0 0:18.35 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:12:49 CDT 2010 62592 root 25 0 45868 40m 2356 R 47.5 7.8 0:24.06 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:00 CDT 2010 62592 root 25 0 50056 44m 2356 R 55.3 8.6 0:29.84 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:10 CDT 2010 62592 root 25 0 53888 47m 2356 R 55.2 9.4 0:35.63 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:21 CDT 2010 62592 root 20 0 56920 50m 2356 R 55.3 9.9 0:41.15 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:31 CDT 2010 62592 root 25 0 60380 54m 2356 R 53.4 10.6 0:46.98 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim Sun Jun 6 18:13:42 CDT 2010 62592 root 22 0 63400 57m 2356 R 49.5 11.2 0:52.74 exim 62587 mailnull 18 0 7548 1212 792 S 0.0 0.2 0:00.00 exim 62588 root 18 0 7536 2052 1648 S 0.0 0.4 0:00.00 exim After some time, it gets to a rate of picking up an extra MB every 10s. I've checked the exim logs and there are no messages coming in there. exim -bV shows: Exim version 4.69 #1 built 16-Mar-2009 14:44:43 Copyright (c) University of Cambridge 2006 Berkeley DB: Sleepycat Software: Berkeley DB 4.2.52: (February 22, 2005) Support for: crypteq iconv() IPv6 PAM Perl OpenSSL Content_Scanning Old_Demime Experimental_SPF Experimental_SRS Experimental_DomainKeys Lookups: lsearch wildlsearch nwildlsearch iplsearch dbm dbmnz passwd Authenticators: cram_md5 dovecot plaintext spa Routers: accept dnslookup ipliteral manualroute queryprogram redirect Transports: appendfile/maildir autoreply pipe smtp Size of off_t: 8 Configuration file is /etc/exim.conf I'm at something of a loss as to how to proceed. Any recommendations would be well received!

  Read the article

• Windows Server 2003 RDP not listening on IPv6

  - by Ian Boyd

  i have a Windows Server 2003 machine; with IPv6 enabled: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : newland.local IP Address. . . . . . . . . . . . : 192.168.1.244 Subnet Mask . . . . . . . . . . . : 255.255.0.0 IP Address. . . . . . . . . . . . : 2001:470:¦¦¦¦:¦¦¦¦:¦¦¦:¦¦¦¦:¦¦¦¦:¦¦¦¦ IP Address. . . . . . . . . . . . : fe80::224:1dff:fe86:fdf2%4 Default Gateway . . . . . . . . . : 192.168.1.1 fe80::250:bfff:fe91:955f%4 i can connect to IIS server using IPv, remotely and locally, using IPv4 and IPv6: > telnet 127.0.0.1 80 (connects) > telnet 192.168.1.244 80 (connects) > telnet ::1 80 (connects) > telnet fe80::224:1dff:fe86:fdf2 80 (connects) And TCPView shows that the server is listening on port 80: Note: This is useful to establish that Windows Server 2003 does have support for IPv6 services. And i can connect to terminal services, locally and remotely, using IPv4: > telnet 127.0.0.1 3389 (connects) > telnet 192.168.1.244 3389 (connects) But i cannot connect to RDP, locally or remotely, over IPv6: > telnet ::1 3389 (fails to connect) > telnet fe80::224:1dff:fe86:fdf2 3389 (fails to connect) We can see that the system is listening on 3389: Except why won't it listen on port 3389 (ipv6)? Unfortunately it's not the firewall. Aside from the fact that i'm connecting locally (in which case the firewall doesn't apply), the firewall doesn't apply:

  Read the article

• iptables DNS resolution

  - by Favolas

  I have a virtual machine with Fedora 19 acting as a router. This machine as an interface (p8p1) with the IP 172.16.1.254 that is connected to another machine (IP 172.16.1.1) that's simulating the external network. I've installed snort 2.9.2.2, applied the snortsam-2.9.2.2.diff.gz patch and installed snortsam 2.70 on the routermachine In snort.conf besides altering some RULE_PATH I believe I've only added the following line to the file. output alert_fwsam: 127.0.0.1:898/password After doing this two comands: ifconfig p8p1 promisc /usr/local/snort/bin/snort -v -i p8p1 If I ping from the external network to the router IP, I can see the info about the pings. One of the rules that I have is icmp-info.rules that as this single line: alert icmp $EXTERNAL_NET any -> $HOME_NET any (msg:"ICMP-INFO Echo Reply"; icode:0; itype:0; classtype:misc-activity; sid:408; rev:6;fwsam: src, 5 minutes;) snortsam.conf as this data: defaultkey password accept localhost keyinterval 30 minutes dontblock 192.168.1.1 # rede local rollbackhosts 50 rollbackthreshold 20 / 30 secs rollbacksleeptime 1 minute logfile /var/log/snort/snortsam.log loglevel 3 daemon nothreads # linha importante para gerar os bloqueios via iptables iptables p8p1 LOG bindip 127.0.0.1 Now I run this command: /usr/local/snort/bin/snort -u snort -i p8p1 -c /etc/snort/snort.conf -l /var/log/snort -Dq Terminal gives this message: Spawning daemon child... My daemon child 2080 lives... Daemon parent exiting (0) and when I runsnortsam in terminal i got this: SnortSam, v 2.70. Copyright (c) 2001-2009 Frank Knobbe . All rights reserved. Plugin 'fwsam': v 2.5, by Frank Knobbe Plugin 'fwexec': v 2.7, by Frank Knobbe Plugin 'pix': v 2.9, by Frank Knobbe Plugin 'ciscoacl': v 2.12, by Ali Basel <[email protected]> Plugin 'cisconullroute': v 2.5, by Frank Knobbe Plugin 'cisconullroute2': v 2.2, by Wouter de Jong <[email protected]> Plugin 'netscreen': v 2.10, by Frank Knobbe Plugin 'ipchains': v 2.8, by Hector A. Paterno <[email protected]> Plugin 'iptables': v 2.9, by Fabrizio Tivano <[email protected]>, Luis Marichal <[email protected]> Plugin 'ebtables': v 2.4, by Bruno Scatolin <[email protected]> Plugin 'watchguard': v 2.7, by Thomas Maier <[email protected]> Plugin 'email': v 2.12, by Frank Knobbe Plugin 'email-blocks-only': v 2.12, by Frank Knobbe Plugin 'snmpinterfacedown': v 2.3, by Ali BASEL <[email protected]> Plugin 'forward': v 2.8, by Frank Knobbe Parsing config file /etc/snortsam.conf... Linking plugin 'iptables'... Checking for existing state file "/var/db/snortsam.state". Found. Reading state file. Starting to listen for Snort alerts. and snortsam.log as an entry like this 2013/10/25, 10:15:17, -, 1, snortsam, Starting to listen for Snort alerts. Now, from the external machine I do ping 172.16.1.254 and it starts showing the info and an alert file is created in /var/log/snort/ that as the info about the PINGS. Something like: [**] [1:408:6] ICMP-INFO Echo Reply [**] [Classification: Misc activity] [Priority: 3] 10/25-10:35:16.061319 172.16.1.254 -> 172.16.1.1 ICMP TTL:64 TOS:0x0 ID:38720 IpLen:20 DgmLen:84 Type:0 Code:0 ID:1389 Seq:1 ECHO REPLY Also, if I run instead /usr/local/snort/bin/snort snort -v -i p8p1 i got this message: Running in packet dump mode --== Initializing Snort ==-- Initializing Output Plugins! Snort BPF option: snort pcap DAQ configured to passive. The DAQ version does not support reload. Acquiring network traffic from "p8p1". ERROR: Can't set DAQ BPF filter to 'snort' (pcap_daq_set_filter: pcap_compile: syntax error)! Fatal Error, Quitting.. So, this are my questions: Shouldn't snortsam block the PING? Is that DAQ error causing the problem? If so, How can I solve it?

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• WSUS 3.0 SP2 installation fails at "configuring database" step.

  - by flashkube

  Attempting to install WSUS 3.0 SP2 on a Windows Server 2003 Enterprise system. I'm asking the setup to create a new database on one of our existing SQL Server 2005 systems. When the setup gets to the "configuring database" step it stops and throws "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." The two logs it suggests I look at are below. I'm not seeing any errors that mean anything to me. Any direction you can give will be greatly appreciated. WSUSSetup.log: 2009-12-04 15:26:21 Success MWUSSetup Validating pre-requisites... 2009-12-04 15:26:22 Error MWUSSetup Failed to determine if an higher version of WSUS is installed. Assuming it is not... (Error 0x80070002: The system cannot find the file specified.) 2009-12-04 15:26:28 Success MWUSSetup No SQL instances found 2009-12-04 15:26:42 Success MWUSSetup Initializing installation details 2009-12-04 15:26:42 Success MWUSSetup Installing ASP.Net 2009-12-04 15:27:24 Success MWUSSetup ASP.Net is installed successfully 2009-12-04 15:27:24 Success MWUSSetup Installing WSUS... 2009-12-04 15:27:28 Success CustomActions.Dll Unable to get INSTALL_LANGUAGE property, calculating it... 2009-12-04 15:27:28 Success CustomActions.Dll Successfully set propery of WSUS admin groups' full names 2009-12-04 15:27:29 Success CustomActions.Dll .Net framework path: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 2009-12-04 15:27:33 Success CustomActions.Dll Creating user group: WSUS Reporters with Description: WSUS Administrators who can only run reports on the Windows Server Update Services server. 2009-12-04 15:27:33 Success CustomActions.Dll Creating WSUS Reporters user group 2009-12-04 15:27:33 Success CustomActions.Dll WSUS Reporters user group already exists 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS Reporters user group 2009-12-04 15:27:33 Success CustomActions.Dll Creating user group: WSUS Administrators with Description: WSUS Administrators can administer the Windows Server Update Services server. 2009-12-04 15:27:33 Success CustomActions.Dll Creating WSUS Administrators user group 2009-12-04 15:27:33 Success CustomActions.Dll WSUS Administrators user group already exists 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS Administrators user group 2009-12-04 15:27:33 Success CustomActions.Dll Successfully created WSUS user groups 2009-12-04 15:27:33 Success CustomActions.Dll Succesfully set binary SID property 2009-12-04 15:27:33 Success CustomActions.Dll Succesfully set binary SID property 2009-12-04 15:27:33 Success CustomActions.Dll Successfully set binary SID properties 2009-12-04 15:28:50 Error MWUSSetup InstallWsus: MWUS Installation Failed (Error 0x80070643: Fatal error during installation.) 2009-12-04 15:28:50 Error MWUSSetup CInstallDriver::PerformSetup: WSUS installation failed (Error 0x80070643: Fatal error during installation.) 2009-12-04 15:28:50 Error MWUSSetup CSetupDriver::LaunchSetup: Setup failed (Error 0x80070643: Fatal error during installation.) From the end of WSUSSetupmsi_091204_1527.log MSI (s) (58:7C) [15:28:49:860]: Note: 1: 1708 MSI (s) (58:7C) [15:28:49:860]: Product: Windows Server Update Services 3.0 SP2 -- Installation failed. MSI (s) (58:7C) [15:28:49:875]: Cleaning up uninstalled install packages, if any exist MSI (s) (58:7C) [15:28:49:875]: MainEngineThread is returning 1603 MSI (s) (58:78) [15:28:49:985]: Destroying RemoteAPI object. MSI (s) (58:90) [15:28:49:985]: Custom Action Manager thread ending. === Logging stopped: 12/4/2009 15:28:49 === MSI (c) (30:54) [15:28:50:016]: Decrementing counter to disable shutdown. If counter = 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (30:54) [15:28:50:016]: MainEngineThread is returning 1603 === Verbose logging stopped: 12/4/2009 15:28:50 ===

  Read the article

< Previous Page | 728 729 730 731 732 733 734 735 736 737 738 739  | Next Page >