side projects - Page 733

Real tortoises keep it slow and steady. How about the backups?

- by Maria Zakourdaev

… Four tortoises were playing in the backyard when they decided they needed hibiscus flower snacks. They pooled their money and sent the smallest tortoise out to fetch the snacks. Two days passed and there was no sign of the tortoise. "You know, she is taking a lot of time", said one of the tortoises. A little voice from just out side the fence said, "If you are going to talk that way about me I won't go." Is it too much to request from the quite expensive 3rd party backup tool to be a way faster than the SQL server native backup? Or at least save a respectable amount of storage by producing a really smaller backup files? By saying “really smaller”, I mean at least getting a file in half size. After Googling the internet in an attempt to understand what other “sql people” are using for database backups, I see that most people are using one of three tools which are the main players in SQL backup area: LiteSpeed by Quest SQL Backup by Red Gate SQL Safe by Idera The feedbacks about those tools are truly emotional and happy. However, while reading the forums and blogs I have wondered, is it possible that many are accustomed to using the above tools since SQL 2000 and 2005. This can easily be understood due to the fact that a 300GB database backup for instance, using regular a SQL 2005 backup statement would have run for about 3 hours and have produced ~150GB file (depending on the content, of course). Then you take a 3rd party tool which performs the same backup in 30 minutes resulting in a 30GB file leaving you speechless, you run to management persuading them to buy it due to the fact that it is definitely worth the price. In addition to the increased speed and disk space savings you would also get backup file encryption and virtual restore - features that are still missing from the SQL server. But in case you, as well as me, don’t need these additional features and only want a tool that performs a full backup MUCH faster AND produces a far smaller backup file (like the gain you observed back in SQL 2005 days) you will be quite disappointed. SQL Server backup compression feature has totally changed the market picture. Medium size database. Take a look at the table below, check out how my SQL server 2008 R2 compares to other tools when backing up a 300GB database. It appears that when talking about the backup speed, SQL 2008 R2 compresses and performs backup in similar overall times as all three other tools. 3rd party tools maximum compression level takes twice longer. Backup file gain is not that impressive, except the highest compression levels but the price that you pay is very high cpu load and much longer time. Only SQL Safe by Idera was quite fast with it’s maximum compression level but most of the run time have used 95% cpu on the server. Note that I have used two types of destination storage, SATA 11 disks and FC 53 disks and, obviously, on faster storage have got my backup ready in half time. Looking at the above results, should we spend money, bother with another layer of complexity and software middle-man for the medium sized databases? I’m definitely not going to do so. Very large database As a next phase of this benchmark, I have moved to a 6 terabyte database which was actually my main backup target. Note, how multiple files usage enables the SQL Server backup operation to use parallel I/O and remarkably increases it’s speed, especially when the backup device is heavily striped. SQL Server supports a maximum of 64 backup devices for a single backup operation but the most speed is gained when using one file per CPU, in the case above 8 files for a 2 Quad CPU server. The impact of additional files is minimal. However, SQLsafe doesn’t show any speed improvement between 4 files and 8 files. Of course, with such huge databases every half percent of the compression transforms into the noticeable numbers. Saving almost 470GB of space may turn the backup tool into quite valuable purchase. Still, the backup speed and high CPU are the variables that should be taken into the consideration. As for us, the backup speed is more critical than the storage and we cannot allow a production server to sustain 95% cpu for such a long time. Bottomline, 3rd party backup tool developers, we are waiting for some breakthrough release. There are a few unanswered questions, like the restore speed comparison between different tools and the impact of multiple backup files on restore operation. Stay tuned for the next benchmarks. Benchmark server: SQL Server 2008 R2 sp1 2 Quad CPU Database location: NetApp FC 15K Aggregate 53 discs Backup statements: No matter how good that UI is, we need to run the backup tasks from inside of SQL Server Agent to make sure they are covered by our monitoring systems. I have used extended stored procedures (command line execution also is an option, I haven’t noticed any impact on the backup performance). SQL backup LiteSpeed SQL Backup SQL safe backup database <DBNAME> to disk= '\\<networkpath>\par1.bak' , disk= '\\<networkpath>\par2.bak', disk= '\\<networkpath>\par3.bak' with format, compression EXECUTE master.dbo.xp_backup_database @database = N'<DBName>', @backupname= N'<DBName> full backup', @desc = N'Test', @compressionlevel=8, @filename= N'\\<networkpath>\par1.bak', @filename= N'\\<networkpath>\par2.bak', @filename= N'\\<networkpath>\par3.bak', @init = 1 EXECUTE master.dbo.sqlbackup '-SQL "BACKUP DATABASE <DBNAME> TO DISK= ''\\<networkpath>\par1.sqb'', DISK= ''\\<networkpath>\par2.sqb'', DISK= ''\\<networkpath>\par3.sqb'' WITH DISKRETRYINTERVAL = 30, DISKRETRYCOUNT = 10, COMPRESSION = 4, INIT"' EXECUTE master.dbo.xp_ss_backup @database = 'UCMSDB', @filename = '\\<networkpath>\par1.bak', @backuptype = 'Full', @compressionlevel = 4, @backupfile = '\\<networkpath>\par2.bak', @backupfile = '\\<networkpath>\par3.bak' If you still insist on using 3rd party tools for the backups in your production environment with maximum compression level, you will definitely need to consider limiting cpu usage which will increase the backup operation time even more: RedGate : use THREADPRIORITY option ( values 0 – 6 ) LiteSpeed : use @throttle ( percentage, like 70%) SQL safe : the only thing I have found was @Threads option. Yours, Maria

Read the article

Inheritance Mapping Strategies with Entity Framework Code First CTP5: Part 2 – Table per Type (TPT)

- by mortezam

In the previous blog post you saw that there are three different approaches to representing an inheritance hierarchy and I explained Table per Hierarchy (TPH) as the default mapping strategy in EF Code First. We argued that the disadvantages of TPH may be too serious for our design since it results in denormalized schemas that can become a major burden in the long run. In today’s blog post we are going to learn about Table per Type (TPT) as another inheritance mapping strategy and we'll see that TPT doesn’t expose us to this problem. Table per Type (TPT)Table per Type is about representing inheritance relationships as relational foreign key associations. Every class/subclass that declares persistent properties—including abstract classes—has its own table. The table for subclasses contains columns only for each noninherited property (each property declared by the subclass itself) along with a primary key that is also a foreign key of the base class table. This approach is shown in the following figure: For example, if an instance of the CreditCard subclass is made persistent, the values of properties declared by the BillingDetail base class are persisted to a new row of the BillingDetails table. Only the values of properties declared by the subclass (i.e. CreditCard) are persisted to a new row of the CreditCards table. The two rows are linked together by their shared primary key value. Later, the subclass instance may be retrieved from the database by joining the subclass table with the base class table. TPT Advantages The primary advantage of this strategy is that the SQL schema is normalized. In addition, schema evolution is straightforward (modifying the base class or adding a new subclass is just a matter of modify/add one table). Integrity constraint definition are also straightforward (note how CardType in CreditCards table is now a non-nullable column). Another much more important advantage is the ability to handle polymorphic associations (a polymorphic association is an association to a base class, hence to all classes in the hierarchy with dynamic resolution of the concrete class at runtime). A polymorphic association to a particular subclass may be represented as a foreign key referencing the table of that particular subclass. Implement TPT in EF Code First We can create a TPT mapping simply by placing Table attribute on the subclasses to specify the mapped table name (Table attribute is a new data annotation and has been added to System.ComponentModel.DataAnnotations namespace in CTP5): public abstract class BillingDetail { public int BillingDetailId { get; set; } public string Owner { get; set; } public string Number { get; set; } } [Table("BankAccounts")] public class BankAccount : BillingDetail { public string BankName { get; set; } public string Swift { get; set; } } [Table("CreditCards")] public class CreditCard : BillingDetail { public int CardType { get; set; } public string ExpiryMonth { get; set; } public string ExpiryYear { get; set; } } public class InheritanceMappingContext : DbContext { public DbSet<BillingDetail> BillingDetails { get; set; } } If you prefer fluent API, then you can create a TPT mapping by using ToTable() method: protected override void OnModelCreating(ModelBuilder modelBuilder) { modelBuilder.Entity<BankAccount>().ToTable("BankAccounts"); modelBuilder.Entity<CreditCard>().ToTable("CreditCards"); } Generated SQL For QueriesLet’s take an example of a simple non-polymorphic query that returns a list of all the BankAccounts: var query = from b in context.BillingDetails.OfType<BankAccount>() select b; Executing this query (by invoking ToList() method) results in the following SQL statements being sent to the database (on the bottom, you can also see the result of executing the generated query in SQL Server Management Studio): Now, let’s take an example of a very simple polymorphic query that requests all the BillingDetails which includes both BankAccount and CreditCard types: projects some properties out of the base class BillingDetail, without querying for anything from any of the subclasses: var query = from b in context.BillingDetails select new { b.BillingDetailId, b.Number, b.Owner }; -- var query = from b in context.BillingDetails select b; This LINQ query seems even more simple than the previous one but the resulting SQL query is not as simple as you might expect: -- As you can see, EF Code First relies on an INNER JOIN to detect the existence (or absence) of rows in the subclass tables CreditCards and BankAccounts so it can determine the concrete subclass for a particular row of the BillingDetails table. Also the SQL CASE statements that you see in the beginning of the query is just to ensure columns that are irrelevant for a particular row have NULL values in the returning flattened table. (e.g. BankName for a row that represents a CreditCard type) TPT ConsiderationsEven though this mapping strategy is deceptively simple, the experience shows that performance can be unacceptable for complex class hierarchies because queries always require a join across many tables. In addition, this mapping strategy is more difficult to implement by hand— even ad-hoc reporting is more complex. This is an important consideration if you plan to use handwritten SQL in your application (For ad hoc reporting, database views provide a way to offset the complexity of the TPT strategy. A view may be used to transform the table-per-type model into the much simpler table-per-hierarchy model.) SummaryIn this post we learned about Table per Type as the second inheritance mapping in our series. So far, the strategies we’ve discussed require extra consideration with regard to the SQL schema (e.g. in TPT, foreign keys are needed). This situation changes with the Table per Concrete Type (TPC) that we will discuss in the next post. References ADO.NET team blog Java Persistence with Hibernate book a { text-decoration: none; } a:visited { color: Blue; } .title { padding-bottom: 5px; font-family: Segoe UI; font-size: 11pt; font-weight: bold; padding-top: 15px; } .code, .typeName { font-family: consolas; } .typeName { color: #2b91af; } .padTop5 { padding-top: 5px; } .padTop10 { padding-top: 10px; } p.MsoNormal { margin-top: 0in; margin-right: 0in; margin-bottom: 10.0pt; margin-left: 0in; line-height: 115%; font-size: 11.0pt; font-family: "Calibri" , "sans-serif"; }

Read the article

Why you need to learn async in .NET

- by PSteele

I had an opportunity to teach a quick class yesterday about what’s new in .NET 4.0. One of the topics was the TPL (Task Parallel Library) and how it can make async programming easier. I also stressed that this is the direction Microsoft is going with for C# 5.0 and learning the TPL will greatly benefit their understanding of the new async stuff. We had a little time left over and I was able to show some code that uses the Async CTP to accomplish some stuff, but it wasn’t a simple demo that you could jump in to and understand so I thought I’d thrown one together and put it in a blog post. The entire solution file with all of the sample projects is located here. A Simple Example Let’s start with a super-simple example (WindowsApplication01 in the solution). I’ve got a form that displays a label and a button. When the user clicks the button, I want to start displaying the current time for 15 seconds and then stop. What I’d like to write is this: lblTime.ForeColor = Color.Red; for (var x = 0; x < 15; x++) { lblTime.Text = DateTime.Now.ToString("HH:mm:ss"); Thread.Sleep(1000); } lblTime.ForeColor = SystemColors.ControlText; (Note that I also changed the label’s color while counting – not quite an ILM-level effect, but it adds something to the demo!) As I’m sure most of my readers are aware, you can’t write WinForms code this way. WinForms apps, by default, only have one thread running and it’s main job is to process messages from the windows message pump (for a more thorough explanation, see my Visual Studio Magazine article on multithreading in WinForms). If you put a Thread.Sleep in the middle of that code, your UI will be locked up and unresponsive for those 15 seconds. Not a good UX and something that needs to be fixed. Sure, I could throw an “Application.DoEvents()” in there, but that’s hacky. The Windows Timer Then I think, “I can solve that. I’ll use the Windows Timer to handle the timing in the background and simply notify me when the time has changed”. Let’s see how I could accomplish this with a Windows timer (WindowsApplication02 in the solution): public partial class Form1 : Form { private readonly Timer clockTimer; private int counter; public Form1() { InitializeComponent(); clockTimer = new Timer {Interval = 1000}; clockTimer.Tick += UpdateLabel; } private void UpdateLabel(object sender, EventArgs e) { lblTime.Text = DateTime.Now.ToString("HH:mm:ss"); counter++; if (counter == 15) { clockTimer.Enabled = false; lblTime.ForeColor = SystemColors.ControlText; } } private void cmdStart_Click(object sender, EventArgs e) { lblTime.ForeColor = Color.Red; counter = 0; clockTimer.Start(); } } Holy cow – things got pretty complicated here. I use the timer to fire off a Tick event every second. Inside there, I can update the label. Granted, I can’t use a simple for/loop and have to maintain a global counter for the number of iterations. And my “end” code (when the loop is finished) is now buried inside the bottom of the Tick event (inside an “if” statement). I do, however, get a responsive application that doesn’t hang or stop repainting while the 15 seconds are ticking away. But doesn’t .NET have something that makes background processing easier? The BackgroundWorker Next I try .NET’s BackgroundWorker component – it’s specifically designed to do processing in a background thread (leaving the UI thread free to process the windows message pump) and allows updates to be performed on the main UI thread (WindowsApplication03 in the solution): public partial class Form1 : Form { private readonly BackgroundWorker worker; public Form1() { InitializeComponent(); worker = new BackgroundWorker {WorkerReportsProgress = true}; worker.DoWork += StartUpdating; worker.ProgressChanged += UpdateLabel; worker.RunWorkerCompleted += ResetLabelColor; } private void StartUpdating(object sender, DoWorkEventArgs e) { var workerObject = (BackgroundWorker) sender; for (int x = 0; x < 15; x++) { workerObject.ReportProgress(0); Thread.Sleep(1000); } } private void UpdateLabel(object sender, ProgressChangedEventArgs e) { lblTime.Text = DateTime.Now.ToString("HH:mm:ss"); } private void ResetLabelColor(object sender, RunWorkerCompletedEventArgs e) { lblTime.ForeColor = SystemColors.ControlText; } private void cmdStart_Click(object sender, EventArgs e) { lblTime.ForeColor = Color.Red; worker.RunWorkerAsync(); } } Well, this got a little better (I think). At least I now have my simple for/next loop back. Unfortunately, I’m still dealing with event handlers spread throughout my code to co-ordinate all of this stuff in the right order. Time to look into the future. The async way Using the Async CTP, I can go back to much simpler code (WindowsApplication04 in the solution): private async void cmdStart_Click(object sender, EventArgs e) { lblTime.ForeColor = Color.Red; for (var x = 0; x < 15; x++) { lblTime.Text = DateTime.Now.ToString("HH:mm:ss"); await TaskEx.Delay(1000); } lblTime.ForeColor = SystemColors.ControlText; } This code will run just like the Timer or BackgroundWorker versions – fully responsive during the updates – yet is way easier to implement. In fact, it’s almost a line-for-line copy of the original version of this code. All of the async plumbing is handled by the compiler and the framework. My code goes back to representing the “what” of what I want to do, not the “how”. I urge you to download the Async CTP. All you need is .NET 4.0 and Visual Studio 2010 sp1 – no need to set up a virtual machine with the VS2011 beta (unless, of course, you want to dive right in to the C# 5.0 stuff!). Starting playing around with this today and see how much easier it will be in the future to write async-enabled applications.

Read the article

BizTalk: Internals: the Partner Direct Ports and the Orchestration Chains

- by Leonid Ganeline

Partner Direct Port is one of the BizTalk hidden gems. It opens simple ways to the several messaging patterns. This article based on the Kevin Lam’s blog article. The article is pretty detailed but it still leaves several unclear pieces. So I have created a sample and will show how it works from different perspectives. Requirements We should create an orchestration chain where the messages should be routed from the first stage to the second stage. The messages should not be modified. All messages has the same message type. Common artifacts Source code can be downloaded here. It is interesting but all orchestrations use only one port type. It is possible because all ports are one-way ports and use only one operation. I have added a B orchestration. It helps to test the sample, showing all test messages in channel. The Receive shape Filter is empty. A Receive Port (R_Shema1Direct) is a plain Direct Port. As you can see, a subscription expression of this direct port has only one part, the MessageType for our test schema: A Filer is empty but, as you know, a link from the Receive shape to the Port creates this MessageType expression. I use only one Physical Receive File port to send a message to all processes. Each orchestration outputs a Trace.WriteLine(“<Orchestration Name>”). Forward Binding This sample has three orchestrations: A_1, A_21 and A_22. A_1 is a sender, A_21 and A_22 are receivers. Here is a subscription of the A_1 orchestration: It has two parts A MessageType. The same was for the B orchestration. A ReceivePortID. There was no such parameter for the B orchestration. It was created because I have bound the orchestration port with Physical Receive File port. This binding means the PortID parameter is added to the subscription. How to set up the ports? All ports involved in the message exchange should be the same port type. It forces us to use the same operation and the same message type for the bound ports. This step as absolutely contra-intuitive. We have to choose a Partner Orchestration parameter for the sending orchestration, A_1. The first strange thing is it is not a partner orchestration we have to choose but an orchestration port. But the most strange thing is we have to choose exactly this orchestration and exactly this port.It is not a port from the partner, receive orchestrations, A_21 or A_22, but it is A_1 orchestration and S_SentFromA_1 port. Now we have to choose a Partner Orchestration parameter for the received orchestrations, A_21 and A_22. Nothing strange is here except a parameter name. We choose the port of the sender, A_1 orchestration and S_SentFromA_1 port. As you can see the Partner Orchestration parameter for the sender and receiver orchestrations is the same. Testing I dropped a test file in a file folder. There we go: A dropped file was received by B and by A_1 A_1 sent a message forward. A message was received by B, A_21, A_22 Let’s look at a context of a message sent by A_1 on the second step: A MessageType part. It is quite expected. A PartnerService, a ParnerPort, an Operation. All those parameters were set up in the Partner Orchestration parameter on both bound ports. Now let’s see a subscription of the A_21 and A_22 orchestrations. Now it makes sense. That’s why we have chosen such a strange value for the Partner Orchestration parameter of the sending orchestration. Inverse Binding This sample has three orchestrations: A_11, A_12 and A_2. A_11 and A_12 are senders, A_2 is receiver. How to set up the ports? All ports involved in the message exchange should be the same port type. It forces us to use the same operation and the same message type for the bound ports. This step as absolutely contra-intuitive. We have to choose a Partner Orchestration parameter for a receiving orchestration, A_2. The first strange thing is it is not a partner orchestration we have to choose but an orchestration port. But the most strange thing is we have to choose exactly this orchestration and exactly this port.It is not a port from the partner, sent orchestrations, A_11 or A_12, but it is A_2 orchestration and R_SentToA_2 port. Now we have to choose a Partner Orchestration parameter for the sending orchestrations, A_11 and A_12. Nothing strange is here except a parameter name. We choose the port of the sender, A_2 orchestration and R_SentToA_2 port. Testing I dropped a test file in a file folder. There we go: A dropped file was received by B, A_11 and by A_12 A_11 and A_12 sent two messages forward. The messages were received by B, A_2 Let’s see what was a context of a message sent by A_1 on the second step: A MessageType part. It is quite expected. A PartnerService, a ParnerPort, an Operation. All those parameters were set up in the Partner Orchestration parameter on both bound ports. Here is a subscription of the A_2 orchestration. Models I had a hard time trying to explain the Partner Direct Ports in simple terms. I have finished with this model: Forward Binding Receivers know a Sender. Sender doesn’t know Receivers. Publishers know a Subscriber. Subscriber doesn’t know Publishers. 1 –> 1 1 –> M Inverse Binding Senders know a Receiver. Receiver doesn’t know Senders. Subscribers know a Publisher. Publisher doesn’t know Subscribers. 1 –> 1 M –> 1 Notes Orchestration chain It’s worth to note, the Partner Direct Port Binding creates a chain opened from one side and closed from another. The Forward Binding: A new Receiver can be added at run-time. The Sender can not be changed without design-time changes in Receivers. The Inverse Binding: A new Sender can be added at run-time. The Receiver can not be changed without design-time changes in Senders.

Read the article

Translating Your Customizations

- by Richard Bingham

This blog post explains the basics of translating the customizations you can make to Fusion Applications products, with the inclusion of information for both composer-based customizations and the generic design-time customizations done via JDeveloper. Introduction Like most Oracle Applications, Fusion Applications installs on-premise with a US-English base language that is, in Release 7, supported by the option to add up to a total of 22 additional language packs (In Oracle Cloud production environments languages are pre-installed already). As such many organizations offer their users the option of working with their local language, and logically that should also apply for any customizations as well. Composer-based UI Customizations Customizations made in Page Composer take into consideration the session LOCALE, as set in the user preferences screen, during all customization work, and stores the customization in the MDS repository accordingly. As such the actual new or changed values used will only apply for the same language under which the customization was made, and text for any other languages requires a separate upload. See the Resource Bundles section below, which incidentally also applies to custom UI changes done in JDeveloper. You may have noticed this when you select the “Select Text Resource” menu option when editing the text on a page. Using this ensures that the resource bundles are used, whereas if you define a static value in Expression Builder it will never be available for translation. Notice in the screenshot below the “What’s New” custom value I have already defined using the ‘Select Text Resource’ feature is internally using the adfBundle groovy function to pull the custom value for my key (RT_S_1) from the ComposerOverrideBundle. Figure 1 – Page Composer showing the override bundle being used. Business Objects Customizing the Business Objects available in the Applications Composer tool for the CRM products, such as adding additional fields, also operates using the session language. Translating these additional values for these fields into other installed languages requires loading additional resource bundles, again as described below. Reports and Analytics Most customizations to Reports and BI Analytics are just essentially reorganizations and visualizations of existing number and text data from the system, and as such will use the appropriate values based on the users session language. Where a translated value or string exists for that session language, it will be used without the need for additional work. Extending through the addition of brand new reports and analytics requires another method of loading the translated strings, as part of what is known as ‘Localizing’ the BI Catalog and Metadata. This time it is via an export/import of XML data through the BI Administrators console, and is described in the OBIEE Admin Guide. Fusion Applications reports based on BI Publisher are already defined in template-per-locale, and in addition provide an extra process for getting the data for translation and reloading. This again uses the standard resource bundle format. Loading a custom report is illustrated in this video from our YouTube channel which shows the screen for both setting the template local and running an export for translation. Fusion Applications Menus Whilst the seeded Navigator and Global Menu values are fully translated when the additional language is installed, if they are customized then the change or new menu item will apply universally, not currently per language. This is set to change in a future release with the new UI Text Editor feature described below. More on Resource Bundles As mentioned above, to provide translations for most of your customizations you need to add values to a resource bundle. This is an industry open standard (OASIS) format XML file with the extension .xliff, and store translated values for the strings used by ADF at run-time. The general process is that these values are exported from the MDS repository, manually edited, and then imported back in again.This needs to be done by an administrator, via either WLST commands or through Enterprise Manager as per the screenshot below. This is detailed out in the Fusion Applications Extensibility Guide. For SaaS environments the Cloud Operations team can assist. Figure 2 – Enterprise Manager’s MDS export used getting resource bundles for manual translation and re-imported on the same screen. All customized strings are stored in an override bundle (xliff file) for each locale, suffixed with the language initials, with English ones being saved to the default. As such each language bundle can be easily identified and updated. Similarly if you used JDeveloper to create your own applications as extensions to Fusion Applications you would use the native support for resource bundles, and add them into the faces-config.xml file for inclusion in your application. An example is this ADF customization video from our YouTube channel. JDeveloper also supports automatic synchronization between your underlying resource bundles and any translatable strings you add – very handy. For more information see chapters on “Using Automatic Resource Bundle Integration in JDeveloper” and “Manually Defining Resource Bundles and Locales” in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework. FND Messages and Look-ups FND Messages, as defined here, are not used for UI labels (they are known as ‘strings’), but are the responses back to users as a result of an action, such as from a page submit. Each ‘message’ is defined and stored in the related database table (FND_MESSAGES_B), with another (FND_MESSAGES_TL) holding any language-specific values. These come seeded with the additional language installs, however if you customize the messages via the “Manage Messages” task in Functional Setup Manager, or add new ones, then currently (in Release 7) you’ll need to repeat it for each language. Figure 3 – An FND Message defined in an English user session. Similarly Look-ups are stored in a translation table (FND_LOOKUP_VALUES_TL) where appropriate, and can be customized by setting the users session language and making the change in the Setup and Maintenance task entitled “Manage [Standard|Common] Look-ups”. Online Help Yes, in fact all the seeded help is applied as part of each language pack install as part of the post-install provisioning process. If you are editing or adding custom online help then the Create Help screen provides a drop-down of which language your help customization will apply to. This is shown in the video below from our YouTube channel, and obviously you’ll need to it for each language in use. What is Coming for Translations? Currently planned for Release 8 is something called the User Interface (UI) Text Editor. This tool will allow the editing of all the text shown on the pages and forms of Fusion Application. This will provide a search based on a particular term or word, say “Worker”, and will allow it to be adjusted, say to “Employee”, which then updates all the Resource Bundles that contain it. In the case of multi-language environments, it will use the users session language (locale) to know which Resource Bundles to apply the change to. This capability will also support customization sandboxes, to help ensure changes can be tested and approved. It is also interesting to note that the design currently allows any page-specific customizations done using Page Composer or Application Composer to over-write the global changes done via the UI Text Editor, allowing for special context-sensitive values to still be used. Further Reading and Resources The following short list provides the mains resources for digging into more detail on translation support for both Composer and JDeveloper customization projects. There is a dedicated chapter entitled “Translating Custom Text” in the Fusion Applications Extensibility Guide. This has good examples and steps for many tasks, especially administering resource bundles. Using localization formatting (numbers, dates etc) for design-time changes is well documented in the Fusion Applications Developer Guide. For more guidelines on general design-time globalization, see either the ‘Internationalizing and Localizing Pages’ chapter in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework (Oracle Fusion Applications Edition) or the general Oracle Database Globalization Support Guide. The Oracle Architecture ‘A-Team’ provided a recent post on customizing the user session timeout popup, using design-time changes to resource bundles. It has detailed step-by-step examples which can be a useful illustration.

Read the article

Delivering the Integrated Portal Experience!

- by Michael Snow

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Guest post by Richard Maldonado, Principal Product Manager, Oracle WebCenter Portal Organizations are still struggling to standardize on a user interaction platform which can meet the needs of all their target audiences. This has not only resulted in inefficient and inconsistent experiences for their users, but it also creates inefficiencies (productivity and costs) for the departments that manage the applications and information systems. Portals have historically been the unifying platform that provide IT with a common interface which can securely surface the most relevant interactions for a given user and/or group of users. However, organizations have found that the technologies available have either not provided the flexibility necessary to address all of their use cases, or they rely too much on IT resources to manage, maintain, and evolve. Empowering the Business Groups The core issue that IT departments face with delivering portal experiences is having enough resources to respond and address the influx of requirements which come in from the business. Commonly, when a business group wants a new portal site established for their group, they will submit a request to the IT dept, the IT dept then assigns a resource to an administrator and/or developer to build. Unfortunately, this approach is not scalable, it can be a time consuming activity which requires significant interaction between the business owner and the IT resource. A modern user interaction platforms should empower the business groups by providing them tools which they can use to build and manage the portal experiences without the need for IT's involvement. And because business groups rarely have technical resources (developers) on staff, the tools must be easy enough that virtually any business user could use. In addition, the tool must be powerful enough to allow them to build the experience that they need, things such as creating a whole new portal, add/manage page and page hierarchy, manage user/group access, add/modify components within the page, etc. This balance between ease-of-use and flexibility is key to the successful adoption of tools which will ultimately reduce the burden on IT, respond to the needs of the business, and deliver high-value experiences for the users. Ready or Not, Here They Come: Smartphones and Tablets Recently, several studies have highlighted that smartphone and tablet-style devices have overtaken PC's in both sales and usage. This shift is further driving organizations to revaluate how they're delivering data, information, and applications to their users. Users are expecting to get the same level of access and interaction, but in a ways which are optimized for the capabilities of the device that they are using. Expect More With the ever growing number of new IT projects and flat/shrinking budgets, organizations are looking for comprehensive solutions which can deliver integrated web experiences that are tailored for the users and optimized for mobile devices. Piecing together a number of point solutions is no longer an option. A modern portal technology should not only address the traditional needs of integrating and surfacing back-end applications/information, but it should enable the business through easy-to-use tools and accelerate the delivery of mobile optimized experiences. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} WebCenter in Action Series: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter Featuring Qualcomm & Keste 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 12.00 Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-fareast- mso-bidi-font-family:"Times New Roman";}

Read the article

GLSL: Strange light reflections [Solved]

- by Tom

According to this tutorial I'm trying to make a normal mapping using GLSL, but something is wrong and I can't find the solution. The output render is in this image: Image1 in this image is a plane with two triangles and each of it is different illuminated (that is bad). The plane has 6 vertices. In the upper left side of this plane are 2 identical vertices (same in the lower right). Here are some vectors same for each vertice: normal vector = 0, 1, 0 (red lines on image) tangent vector = 0, 0,-1 (green lines on image) bitangent vector = -1, 0, 0 (blue lines on image) here I have one question: The two identical vertices does need to have the same tangent and bitangent? I have tried to make other values to the tangents but the effect was still similar. Here are my shaders Vertex shader: #version 130 // Input vertex data, different for all executions of this shader. in vec3 vertexPosition_modelspace; in vec2 vertexUV; in vec3 vertexNormal_modelspace; in vec3 vertexTangent_modelspace; in vec3 vertexBitangent_modelspace; // Output data ; will be interpolated for each fragment. out vec2 UV; out vec3 Position_worldspace; out vec3 EyeDirection_cameraspace; out vec3 LightDirection_cameraspace; out vec3 LightDirection_tangentspace; out vec3 EyeDirection_tangentspace; // Values that stay constant for the whole mesh. uniform mat4 MVP; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Output position of the vertex, in clip space : MVP * position gl_Position = MVP * vec4(vertexPosition_modelspace,1); // Position of the vertex, in worldspace : M * position Position_worldspace = (M * vec4(vertexPosition_modelspace,1)).xyz; // Vector that goes from the vertex to the camera, in camera space. // In camera space, the camera is at the origin (0,0,0). vec3 vertexPosition_cameraspace = ( V * M * vec4(vertexPosition_modelspace,1)).xyz; EyeDirection_cameraspace = vec3(0,0,0) - vertexPosition_cameraspace; // Vector that goes from the vertex to the light, in camera space. M is ommited because it's identity. vec3 LightPosition_cameraspace = ( V * vec4(LightPosition_worldspace,1)).xyz; LightDirection_cameraspace = LightPosition_cameraspace + EyeDirection_cameraspace; // UV of the vertex. No special space for this one. UV = vertexUV; // model to camera = ModelView vec3 vertexTangent_cameraspace = MV3x3 * vertexTangent_modelspace; vec3 vertexBitangent_cameraspace = MV3x3 * vertexBitangent_modelspace; vec3 vertexNormal_cameraspace = MV3x3 * vertexNormal_modelspace; mat3 TBN = transpose(mat3( vertexTangent_cameraspace, vertexBitangent_cameraspace, vertexNormal_cameraspace )); // You can use dot products instead of building this matrix and transposing it. See References for details. LightDirection_tangentspace = TBN * LightDirection_cameraspace; EyeDirection_tangentspace = TBN * EyeDirection_cameraspace; } Fragment shader: #version 130 // Interpolated values from the vertex shaders in vec2 UV; in vec3 Position_worldspace; in vec3 EyeDirection_cameraspace; in vec3 LightDirection_cameraspace; in vec3 LightDirection_tangentspace; in vec3 EyeDirection_tangentspace; // Ouput data out vec3 color; // Values that stay constant for the whole mesh. uniform sampler2D DiffuseTextureSampler; uniform sampler2D NormalTextureSampler; uniform sampler2D SpecularTextureSampler; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Light emission properties // You probably want to put them as uniforms vec3 LightColor = vec3(1,1,1); float LightPower = 40.0; // Material properties vec3 MaterialDiffuseColor = texture2D( DiffuseTextureSampler, vec2(UV.x,-UV.y) ).rgb; vec3 MaterialAmbientColor = vec3(0.1,0.1,0.1) * MaterialDiffuseColor; //vec3 MaterialSpecularColor = texture2D( SpecularTextureSampler, UV ).rgb * 0.3; vec3 MaterialSpecularColor = vec3(0.5,0.5,0.5); // Local normal, in tangent space. V tex coordinate is inverted because normal map is in TGA (not in DDS) for better quality vec3 TextureNormal_tangentspace = normalize(texture2D( NormalTextureSampler, vec2(UV.x,-UV.y) ).rgb*2.0 - 1.0); // Distance to the light float distance = length( LightPosition_worldspace - Position_worldspace ); // Normal of the computed fragment, in camera space vec3 n = TextureNormal_tangentspace; // Direction of the light (from the fragment to the light) vec3 l = normalize(LightDirection_tangentspace); // Cosine of the angle between the normal and the light direction, // clamped above 0 // - light is at the vertical of the triangle -> 1 // - light is perpendicular to the triangle -> 0 // - light is behind the triangle -> 0 float cosTheta = clamp( dot( n,l ), 0,1 ); // Eye vector (towards the camera) vec3 E = normalize(EyeDirection_tangentspace); // Direction in which the triangle reflects the light vec3 R = reflect(-l,n); // Cosine of the angle between the Eye vector and the Reflect vector, // clamped to 0 // - Looking into the reflection -> 1 // - Looking elsewhere -> < 1 float cosAlpha = clamp( dot( E,R ), 0,1 ); color = // Ambient : simulates indirect lighting MaterialAmbientColor + // Diffuse : "color" of the object MaterialDiffuseColor * LightColor * LightPower * cosTheta / (distance*distance) + // Specular : reflective highlight, like a mirror MaterialSpecularColor * LightColor * LightPower * pow(cosAlpha,5) / (distance*distance); //color.xyz = E; //color.xyz = LightDirection_tangentspace; //color.xyz = EyeDirection_tangentspace; } I have replaced the original color value by EyeDirection_tangentspace vector and then I got other strange effect but I can not link the image (not eunogh reputation) Is it possible that with this shaders is something wrong, or maybe in other place in my code e.g with my matrices?

Read the article

Oracle Enterprise Manager Ops Center : Using Operational Profiles to Install Packages and other Content

- by LeonShaner

Oracle Enterprise Manager Ops Center provides numerous ways to deploy content, such as through OS Update Profiles, or as part of an OS Provisioning plan or combinations of those and other "Install Software" capabilities of Deployment Plans. This short "how-to" blog will highlight an alternative way to deploy content using Operational Profiles. Usually we think of Operational Profiles as a way to execute a simple "one-time" script to perform a basic system administration function, which can optionally be based on user input; however, Operational Profiles can be much more powerful than that. There is often more to performing an action than merely running a script -- sometimes configuration files, packages, binaries, and other scripts, etc. are needed to perform the action, and sometimes the user would like to leave such content on the system for later use. For shell scripts and other content written to be generic enough to work on any flavor of UNIX, converting the same scripts and configuration files into Solaris 10 SVR4 package, Solaris 11 IPS package, and/or a Linux RPM's might be seen as three times the work, for little appreciable gain. That is where using an Operational Profile to deploy simple scripts and other generic content can be very helpful. The approach is so powerful, that pretty much any kind of content can be deployed using an Operational Profile, provided the files involved are not overly large, and it is not necessary to convert the content into UNIX variant-specific formats. The basic formula for deploying content with an Operational Profile is as follows: Begin with a traditional script header, which is a UNIX shell script that will be responsible for decoding and extracting content, copying files into the right places, and executing any other scripts and commands needed to install and configure that content. Include steps to make the script platform-aware, to do the right thing for a given UNIX variant, or a "sorry" message if the operator has somehow tried to run the Operational Profile on a system where the script is not designed to run. Ops Center can constrain execution by target type, so such checks at this level are an added safeguard, but also useful with the generic target type of "Operating System" where the admin wants the script to "do the right thing," whatever the UNIX variant. Include helpful output to show script progress, and any other informational messages that can help the admin determine what has gone wrong in the case of a problem in script execution. Such messages will be shown in the job execution log. Include necessary "clean up" steps for normal and error exit conditions Set non-zero exit codes when appropriate -- a non-zero exit code will cause an Operational Profile job to be marked failed, which is the admin's cue to look into the job details for diagnostic messages in the output from the script. That first bullet deserves some explanation. If Operational Profiles are usually simple "one-time" scripts and binary content is not allowed, then how does the actual content, packages, binaries, and other scripts get delivered along with the script? More specifically, how does one include such content without needing to first create some kind of traditional package? All that is required is to simply encode the content and append it to the end of the Operational Profile. The header portion of the Operational Profile will need to contain the commands to decode the embedded content that has been appended to the bottom of the script. The header code can do whatever else is needed, and finally clean up any intermediate files that were created during the decoding and extraction of the content. One way to encode binary and other content for inclusion in a script is to use the "uuencode" utility to convert the content into simple base64 ASCII text -- a form that is suitable to be appended to an Operational Profile. The behavior of the "uudecode" utility is such that it will skip over any parts of the input that do not fit the uuencoded "begin" and "end" clauses. For that reason, your header script will be skipped over, and uudecode will find your embedded content, that you will uuencode and paste at the end of the Operational Profile. You can have as many "begin" / "end" clauses as you need -- just separate each embedded file by an empty line between "begin" and "end" clauses. Example: Install SUNWsneep and set the system serial number Script: deploySUNWsneep.sh ( <- right-click / save to download) Highlights: #!/bin/sh # Required variables: OC_SERIAL="$OC_SERIAL" # The user-supplied serial number for the asset ... Above is a good practice, showing right up front what kind of input the Operational Profile will require. The right-hand side where $OC_SERIAL appears in this example will be filled in by Ops Center based on the user input at deployment time. The script goes on to restrict the use of the program to the intended OS type (Solaris 10 or older, in this example, but other content might be suitable for Solaris 11, or Linux -- it depends on the content and the script that will handle it). A temporary working directory is created, and then we have the command that decodes the embedded content from "self" which in scripting terms is $0 (a variable that expands to the name of the currently executing script): # Pass myself through uudecode, which will extract content to the current dir uudecode $0 At that point, whatever content was appended in uuencoded form at the end of the script has been written out to the current directory. In this example that yields a file, SUNWsneep.7.0.zip, which the rest of the script proceeds to unzip, and pkgadd, followed by running "/opt/SUNWsneep/bin/sneep -s $OC_SERIAL" which is the command that stores the system serial for future use by other programs such as Explorer. Don't get hung up on the example having used a pkgadd command. The content started as a zip file and it could have been a tar.gz, or any other file. This approach simply decodes the file. The header portion of the script has to make sense of the file and do the right thing (e.g. it's up to you). The script goes on to clean up after itself, whether or not the above was successful. Errors are echo'd by the script and a non-zero exit code is set where appropriate. Second to last, we have: # just in case, exit explicitly, so that uuencoded content will not cause error OPCleanUP exit # The rest of the script is ignored, except by uudecode # # UUencoded content follows # # e.g. for each file needed, # $ uuencode -m {source} {source} > {target}.uu5 # then paste the {target}.uu5 files below # they will be extracted into the workding dir at $TDIR # The commentary above also describes how to encode the content. Finally we have the uuencoded content: begin-base64 444 SUNWsneep.7.0.zip UEsDBBQAAAAIAPsRy0Di3vnukAAAAMcAAAAKABUAcmVhZG1lLnR4dFVUCQADOqnVT7up ... VXgAAFBLBQYAAAAAAgACAJEAAADTNwEAAAA= ==== That last line of "====" is the base64 uuencode equivalent of a blank line, followed by "end" and as mentioned you can have as many begin/end clauses as you need. Just separate each embedded file by a blank line after each ==== and before each begin-base64. Deploying the example Operational Profile looks like this (where I have pasted the system serial number into the required field): The job succeeded, but here is an example of the kind of diagnostic messages that the example script produces, and how Ops Center displays them in the job details: This same general approach could be used to deploy Explorer, and other useful utilities and scripts. Please let us know what you think? Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager web page or follow us at : Twitter | Facebook | YouTube | Linkedin | Newsletter

Read the article

It was a figure of speech!

- by Ratman21

Yesterday I posted the following as attention getter / advertisement (as well as my feelings). In the groups, (I am in) on the social networking site, LinkedIn and boy did I get responses. I am fighting mad about (a figure of speech, really) not having a job! Look just because I am over 55 and have gray hair. It does not mean, my brain is dead or I can no longer trouble shoot a router or circuit or LAN issue. Or that I can do “IT” work at all. And I could prove this if; some one would give me at job. Come on try me for 90 days at min. wage. I know you will end up keeping me (hope fully at normal pay) around. Is any one hearing me…come on take up the challenge! This was the responses I got. I hear you. We just need to retrain and get our skills up to speed is all. That is what I am doing. I have not given up. Just got to stay on top of the game. Experience is on our side if we have the credentials and we are reasonable about our salaries this should not be an issue. Already on it, going back to school and have got three certifications (CompTIA A+, Security+ and Network+. I am now studying for my CISCO CCNA certification. As to my salary, I am willing to work at very reasonable rate. You need to re-brand yourself like a product, market and sell yourself. You need to smarten up, look and feel a million dollars, re-energize yourself, regain your confidents. Either start your own business, or re-write your CV so it stands out from the rest, get the template off the internet. Contact every recruitment agent in your town, state, country and overseas, and on the web. Apply to every job you think you could do, you may not get it but you will make a contact for your network, which may lead to a job at the end of the tunnel. Get in touch with everyone you know from past jobs. Do charity work. I maintain the IT Network, stage electrical and the Telecom equipment in my church, Again already on it. I have email the world is seems with my resume and cover letters. So far, I have rewritten or had it rewrote, my resume and cover letters; over seven times so far. Re-energize? I never lost my energy level or my self-confidents in my work (now if could get some HR personal to see the same). I also volunteer at my church, I created and maintain the church web sit. I share your frustration. Sucks being over 50 and looking for work. Please don't sell yourself short at min wage because the employer will think that’s your worth. Keep trying!! I never stop trying and min wage is only for 90 days. If some one takes up the challenge. Some post asked if I am keeping up technology. Do you keep up with the latest technology and can speak the language fluidly? Yep to that and as to speaking it also a yep! I am a geek you know. I heard from others over the 50 year mark and younger too. I'm with you! I keep getting told that I don't have enough experience because I just recently completed a Masters level course in Microsoft SQL Server, which gave me a project-intensive equivalent of between 2 and 3 years of experience. On top of that training, I have 19 years as an applications programmer and database administrator. I can normalize rings around experienced DBAs and churn out effective code with the best of them. But my 19 years is worthless as far as most recruiters and HR people are concerned because it is not the specific experience for which they're looking. HR AND RECRUITERS TAKE NOTE: Experience, whatever the language, translates across platforms and technology! By the way, I'm also over 55 and still have "got it"! I never lost it and I also can work rings round younger techs. I'm 52 and female and seem to be having the same issues. I have over 10 years experience in tech support (with a BS in CIS) and can't get hired either. Ow, I only have an AS in computer science along with my certifications. Keep the faith, I have been unemployed since August of 2008. I agree with you...I am willing to return to the beginning of my retail career and work myself back through the ranks, if someone will look past the grey and realize the knowledge I would bring to the table. I also would like some one to look past the gray. Interesting approach, volunteering to work for minimum wage for 90 days. I'm in the same situation as you, being 55 & balding w/white hair, so I know where you're coming from. I've been out of work now for a year. I'm in Michigan, where the unemployment rate is estimated to be 15% (the worst in the nation) & even though I've got 30+ years of IT experience ranging from mainframe to PC desktop support, it's difficult to even get a face-to-face interview. I had one prospective employer tell me flat out that I "didn't have the energy required for this position". Mostly I never get any feedback. All I can say is good luck & try to remain optimistic. He said WHAT! Yes remaining optimistic is key. Along with faith in God. Then there was this (for lack of better word) jerk. Give it up already. You were too old to work in high tech 10 years ago. Scratch that, 20 years ago! Try selling hot dogs in front of Fry's Electronics. At least you would get a chance to eat lunch with your previous colleagues.... You know funny thing on this person is that I checked out his profile. He is older than I am.

Read the article

CodePlex Daily Summary for Saturday, June 16, 2012

CodePlex Daily Summary for Saturday, June 16, 2012Popular ReleasesCosmos (C# Open Source Managed Operating System): Release 92560: Prerequisites Visual Studio 2010 - Any version including Express. Express users must also install Visual Studio 2010 Integrated Shell runtime VMWare - Cosmos can run on real hardware as well as other virtualization environments but our default debug setup is configured for VMWare. VMWare Player (Free). or Workstation VMWare VIX API 1.11AutoUpdaterdotNET : Autoupdate for VB.NET and C# Developer: AutoUpdater.NET 1.1: Release Notes *New feature added that allows user to select remind later interval.Sumzlib: API document: API documentMicrosoft SQL Server Product Samples: Database: AdventureWorks 2008 OLTP Script: Install AdventureWorks2008 OLTP database from script The AdventureWorks database can be created by running the instawdb.sql DDL script contained in the AdventureWorks 2008 OLTP Script.zip file. The instawdb.sql script depends on two path environment variables: SqlSamplesDatabasePath and SqlSamplesSourceDataPath. The SqlSamplesDatabasePath environment variable is set to the default Microsoft ® SQL Server 2008 path. You will need to change the SqlSamplesSourceDataPath environment variable to th...HigLabo: HigLabo_20120613: Bug fix HigLabo.Mail Decode header encoded by CP1252Jasc (just another script compressor): 1.3.1: Updated Ajax Minifier to 4.55.WipeTouch, a jQuery touch plugin: 1.2.0: Changes since 1.1.0: New: wipeMove event, triggered while moving the mouse/finger. New: added "source" to the result object. Bug fix: sometimes vertical wipe events would not trigger correctly. Bug fix: improved tapToClick handler. General code refactoring. Windows Phone 7 is not supported, yet! Its behaviour is completely broken and would require some special tricks to make it work. Maybe in the future...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3026 (June 2012): Fixes: round( 0.0 ) local TimeZone name TimeZone search compiling multi-script-assemblies PhpString serialization DocDocument::loadHTMLFile() token_get_all() parse_url()BlackJumboDog: Ver5.6.4: 2012.06.13 Ver5.6.4 　(1) Web???????、???POST??????????????????Yahoo! UI Library: YUI Compressor for .Net: Version 2.0.0.0 - Ferret: - Merging both 3.5 and 2.0 codebases to a single .NET 2.0 assembly. - MSBuild Task. - NAnt Task.Bumblebee: Version 0.3.1: Changed default config values to decent ones. Restricted visibility of Hive.fs to internal. Added some XML documentation. Added Array.shuffle utility. The dll is also available on NuGet My apologies, the initial source code referenced was missing one file which prevented it from building The source code contains two examples, one in C#, one in F#, illustrating the usage of the framework on the Travelling Salesman Problem: Source CodeSharePoint XSL Templates: SPXSLT 0.0.9: Added new template FixAmpersands. Fixed the contents of the MultiSelectValueCheck.xsl file, which was missing the stylesheet wrapper.ExcelFileEditor: .CS File: nothingBizTalk Scheduled Task Adapter: Release 4.0: Works with BizTalk Server 2010. Compiled in .NET Framework 4.0. In this new version are available small improvements compared to the current version (3.0). We can highlight the following improvements or changes: 24 hours support in “start time” property. Previous versions had an issue with setting the start time, as it shown 12 hours watch but no AM/PM. Daily scheduler review. Solved a small bug on Daily Properties: unable to switch between “Every day” and “on these days” Installation e...Weapsy - ASP.NET MVC CMS: 1.0.0 RC: - Upgrade to Entity Framework 4.3.1 - Added AutoMapper custom version (by nopCommerce Team) - Added missed model properties and localization resources of Plugin Definitions - Minor changes - Fixed some bugsXenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0 Beta: Catalog and Publication reviews and ratings Store language packs in data base Improve reporting system Improve Import/Export system A lot of WebAdmin app UI improvements Initial implementation of the WebForum app DB indexes Improve and simplify architecture Less abstractions Modernize architecture Improve, simplify and unify API Simplify and improve testing A lot of new unit tests Codebase refactoring and ReSharpering Utilize Castle Windsor Utilize NHibernate ORM ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.55: Properly handle IE extension to CSS3 grammar that allows for multiple parameters to functional pseudo-class selectors. add new switch -braces:(new|same) that affects where opening braces are placed in multi-line output. The default, "new" puts them on their own new line; "same" outputs them at the end of the previous line. add new optional values to the -inline switch: -inline:(force|noforce), which can be combined with the existing boolean value via comma-separators; value "force" (which...Microsoft Media Platform: Player Framework: MMP Player Framework 2.7 (Silverlight and WP7): Additional DownloadsSMFv2.7 Full Installer (MSI) - This will install everything you need in order to develop your own SMF player application, including the IIS Smooth Streaming Client. It only includes the assemblies. If you want the source code please follow the link above. Smooth Streaming Sample Player - This is a pre-built player that includes support for IIS Smooth Streaming. You can configure the player to playback your content by simplying editing a configuration file - no need to co...Liberty: v3.2.1.0 Release 10th June 2012: Change Log -Added -Liberty is now digitally signed! If the certificate on Liberty.exe is missing, invalid, or does not state that it was developed by "Xbox Chaos, Open Source Developer," your copy of Liberty may have been altered in some (possibly malicious) way. -Reach Mass biped max health and shield changer -Fixed -H3/ODST Fixed all of the glitches that users kept reporting (also reverted the changes made in 3.2.0.2) -Reach Made some tag names clearer and more consistent between m...Media Companion: Media Companion 3.503b: It has been a while, so it's about time we release another build! Major effort has been for fixing trailer downloads, plus a little bit of work for episode guide tag in TV show NFOs.New Projects.NinJa (dotNinja): An extensive JavaScript Framework revolving around principles found in .NET and aiming to integrate full Intellisense support. bab-rizg: solve unemployment problemBizTalk Multi-part Message Attachments Zipper Pipeline Component: This pipeline component replaces all attachments of a multi-part message, in a send pipeline, for its zipped equivalent.Boggle.Net: A basic implementation of Boggle for WPF.CFScript: CFScript is an ANT-like scripting system for Compact Framework. Tasks like copying files, setting registry values o install CAB files can be done with CFScript.Diablo3: Diablo3Dygraphs.NET: Dygraphs.NETDynamics CRM plugin for nopCommerce: This plugins is a bridge between nopCommerce and Dynamics CRM. nms.gaming: Place holderProject Bright Star: Project Bright Star. Deal with it.RDFSharp: RDFSharp is a library designed to ease the development of .NET applications based on the RDF and Semantic Web data model.SlamCMS: An application framework that allows you to build content managed sites leveraging SharePoint 2010 for publishing with tools to query and manifest your data.test02: no

Read the article

Looking into the JQuery Overlays Plugin

- by nikolaosk

I have been using JQuery for a couple of years now and it has helped me to solve many problems on the client side of web development. You can find all my posts about JQuery in this link. In this post I will be providing you with a hands-on example on the JQuery Overlays Plugin.If you want you can have a look at this post, where I describe the JQuery Cycle Plugin.You can find another post of mine talking about the JQuery Carousel Lite Plugin here. Another post of mine regarding the JQuery Image Zoom Plugin can be found here.I will be writing more posts regarding the most commonly used JQuery Plugins. With the JQuery Overlays Plugin we can provide the user (overlay) with more information about an image when the user hovers over the image. I have been using extensively this plugin in my websites. In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like. You can use Visual Studio 2012 Express edition. You can download it here. You can download this plugin from this link. I launch Expression Web 4.0 and then I type the following HTML markup (I am using HTML 5) <html lang="en"> <head> <link rel="stylesheet" href="ImageOverlay.css" type="text/css" media="screen" /> <script type="text/javascript" src="jquery-1.8.3.min.js"></script> <script type="text/javascript" src="jquery.ImageOverlay.min.js"></script> <script type="text/javascript"> $(function () { $("#Liverpool").ImageOverlay(); }); </script> </head><body> <ul id="Liverpool" class="image-overlay"> <li> <a href="www.liverpoolfc.com"> <img alt="Liverpool" src="championsofeurope.jpg" /> <div class="caption"> <h3>Liverpool Football club</h3> <p>The greatest club in the world</p> </div> </a> </li> </ul></body></html> This is a very simple markup. I have added references to the JQuery library (current version is 1.8.3) and the JQuery Overlays Plugin. Then I add 1 image in the element with "id=Liverpool". There is a caption class as well, where I place the text I want to show when the mouse hovers over the image. The caption class and the Liverpool id element are styled in the ImageOverlay.css file that can also be downloaded with the plugin.You can style the various elements of the html markup in the .css file. The Javascript code that makes it all happen follows. <script type="text/javascript"> $(function () { $("#Liverpool").ImageOverlay(); }); </script> I am just calling the ImageOverlay function for the Liverpool ID element.The contents of ImageOverlay.css file follow .image-overlay { list-style: none; text-align: left; }.image-overlay li { display: inline; }.image-overlay a:link, .image-overlay a:visited, .image-overlay a:hover, .image-overlay a:active { text-decoration: none; }.image-overlay a:link img, .image-overlay a:visited img, .image-overlay a:hover img, .image-overlay a:active img { border: none; }.image-overlay a{ margin: 9px; float: left; background: #fff; border: solid 2px; overflow: hidden; position: relative;}.image-overlay img{ position: absolute; top: 0; left: 0; border: 0;}.image-overlay .caption{ float: left; position: absolute; background-color: #000; width: 100%; cursor: pointer; /* The way to change overlay opacity is the follow properties. Opacity is a tricky issue due to longtime IE abuse of it, so opacity is not offically supported - use at your own risk. To play it safe, disable overlay opacity in IE. */ /* For Firefox/Opera/Safari/Chrome */ opacity: .8; /* For IE 5-7 */ filter: progid:DXImageTransform.Microsoft.Alpha(Opacity=80); /* For IE 8 */ -MS-filter: "progid:DXImageTransform.Microsoft.Alpha(Opacity=80)";}.image-overlay .caption h1, .image-overlay .caption h2, .image-overlay .caption h3,.image-overlay .caption h4, .image-overlay .caption h5, .image-overlay .caption h6{ margin: 10px 0 10px 2px; font-size: 26px; font-weight: bold; padding: 0 0 0 5px; color:#92171a;}.image-overlay p{ text-indent: 0; margin: 10px; font-size: 1.2em;} It couldn't be any simpler than that. I view my simple page in Internet Explorer 10 and it works as expected. I have tested this simple solution in all major browsers and it works fine.Have a look at the picture below. You can test it yourself and see the results in your favorite browser. Hope it helps!!!

Read the article

Need personal advice on how to get out of a company..

- by SOfan

Hi, I am an SO user since past 6 months and this is the first time I am turning to SO for personal help. I have asked technical questions before with my real ID. I am stuck inside a service based IT company for the past one year and haven't been able to decide if to leave it, when to leave it and how to leave it. I had taken 2 weeks LWP on medical reason roughly at end of 1 year and then soon after reporting, I applied for 2 months more LWP (on medical/personal ground) with the intention of working on my health,take up a hobby class to ward off depression,pessimism, to have some fun in life, and to look for a job which I really would be excited about - that interests me and which matches with my strength. My leave starts from this Monday. So in any case, I had hard set in mind that I will leave the company after I join them back hopefully with some job offer already in hand (after figuring out what I want do). Neither I can stand the past project,past colleagues,company, HR, pathetically low salary. But if I really listen to my heart, I don't want to have to go back to that office after my sabbatical and again have to see those people. I will have to resign it after my sabbatical ends. Then HR people perhaps wont like it, may even accuse me on face or behind back that primary purpose of my leave must have been to hunt for a better job and I lied about medical and person reasons. Also, if they get nasty and force me to serve 2 months notice period. There is no way I see myself after sabbatical resuming in old project or starting new work. It will be a pain. Since they have already approved 2 months leave and stuff, ideally if they want, they should be just able to relieve me right on the next day after I join back. But, I don't know if they want to get nasty, will they mention about my 2 months sabbatical leave in my experience letter or more scary, the term medical/personal reason. I have hard earned my experience here, have worked against my will, mostly it has been painful and slogged like anything, because I realize the importance of work experience in IT industry. I don't have greed to have those 2 months included extra in my experience letter, but I don't want to mess up with my experience letter in a way which makes my next employer ask question, get suspicious, or be wary if I have any medical reason going on. Being an emotional,moody person or somebody who can't be in an environment, once my mind and heart starts hating it. I think it perhaps is best, if I resign on Monday itself telling them (in polite manner) something that look I took sabbatical for some reason but I don't want to resume working in the company after my sabbatical ends. So please accept my resignation. Now tell me what you want to do about my leave request, my notice period and when you are willing to relieve me. What should I write and how? Some background: I am working in an IT company in India.I am overqualified in the company. It is grossly underpaying me. My education qualifications far exceed anyone's in the whole company being a CS undergrad as well as a CS grad. I joined this company after finishing the grad. I had self-doubts about my skills and interest as a programmer. I like doing research oriented work, though didn't have any particular success during grad. My life here has been very hectic. The project containing many many sub-projects has kept me on my toes and I have never really liked the work. I have been playing against my strength. Also the company strict internet usage policy (you can't read gmails, can't browse any non-work related sites not even news). When working for a client, from the machine we can't even check company related emails.For this one has to go to kiosk like 5 machines in a small room etc. Most of the times those machines are not available, so it was not unusual to keep making rounds to these kiosk machines to check company emails, browse company related emails etc.So it was not so easy to keep in touch with company related basic affairs for a not particular careful person. Things like this which are new to me, make me feel restricted. I am an undecisive person with a sense of failure, self-doubt, not meeting up unrealistic expectation. Somewhere at back of mind, I envy my classmates who make a smooth transition from company to company without causing any gap in their resume. I on other hand have gaps in resume. I get tired after working in a place for sometime. problem with colleagues in general. I am not particular great with people, have few friends, not known for a fun nature, rather serious, scholar. I am not a typical conventional female. I think females are usually more disciplined. But I am not so. I reach office late (though after informing manager). I don't want to blame them entirely, because from my past, it is not unusual for me to get undecisive on things. Also I had doubts about my ability as researched and to succeed there. of building a relationship in a group, to have something to talk about, newspaper. I get cut-off from people. peer pressure. I make blunders in coding, lose patience. Consciously or unconsciously I feel contempt for people here, work here, environment here. I have doubts that either I go to a place which does innovation, does research oriented work, product biggies, have great motivated people, have competent people passionate about products they are building. But then I also doubt my ability to survive there. I have identified that an idea job for me would be 4 days a week, a high salary job. When among people in company/team, I can't think much. I need some time at home to read good authentic books written in good style on what work I am doing.So that I am comfortable with my understanding of work. I get into pressure easily under deadline and need 5th day to cool myself off. I took for 2 weeks leave, because each day was hell for me. May be the depression phase of bipolar is on and also partially it could be that being a work centered person, who derives happiness,self-esteem from work, haven't been enjoying work and have been working for the sole person of proving stability, and ability to stick, against all odds, and facing what challenges I see, bonding with people, identifying opportunities to learn in given task etc.have been averaging one day LWP in 1 week or 10 days. or may be because of my nature,ADD,not being able to switch context,out of touch with news, don't have a circle of friends with who I enjoy. less knowledge in general to talk about, just some technical stuff.anyway, so due to emotional reason, some practical reason etc, I wanted to be very sure before leaving. So my leave starts from Monday and I should feel happy about it. I have taken the leave to for a few purposes - to take care of my health by regular yoga/exercise (with project on, I just can't do anything regular), reassess myself to see what I want to try next which work I might like, look for next job, take up a hobby which I like say singing. I am not clear on my career,job aspiration. I have tried my hands on research. During this year appraisal yesterday, I even had some conflict with my last manager. In meeting with me one on one, he would say all nice things about me, but in feedback to new manager, he hasn't given any excellent feedback. It is all only good. I am angry at this old Manager. Also new manager also scolded me as I didn't agree to his appraisal and waited to hear myself from old Manager. He kind of scolded me for wasting his time. Am I being unethical somewhere? I am always very conscious of if I am cheating anywhere. What advice I am seeking? How to resign and what to write in resignation letter

Read the article

Goodbye my beloved Nexus One, hello Windows Phone 7

- by George Clingerman

Last night my wife’s Nexus One finally bit the dust. You may not know but I’ve been nursing her Nexus One one along for quite a while after her screen shattered. I was able to replace it on my own (go me!) but little quirks have been popping up and the phone was quickly deteriorating. Lately it’s been the power button. Wifey would often have to press the power button several times to get her phone to turn on and last night it just wouldn’t wake up again. I took it apart and tried my best to see if I could somehow make it live once again but no luck this time. It was finally ready to retire. We looked at first for a replacement phone for her but she wasn’t really seeing anything she liked. So I decided to make the ultimate sacrifice and offer up my much loved Nexus One and I would then get a new Windows Phone 7 device. I love T-Mobile for my service so my choices were immediately limited to basically just a single phone. The HTC HD7. I read reviews and they were all over the board from people loving to people hating the phone but I decided, hey, why not, let’s take this plunge. And I did. I’ve only had the phone for about two days now so below is my list of first reaction pros/cons. These are basically things I’ve missed or things I’ve noticed that I really like about my new Windows Phone. Cons: * No Google Talk – I used this a LOT on my Nexus. I’ve found an application called “Flory” but it’s just an ok substitute, not the same as the full featured GTalk I had on my Nexus. * Seesmic is limited– I loved the way Seesmic worked on my Nexus. It was my mobile twitter client of choice. Everything about it worked really well. On Windows Phone 7 it’s just ok. I don’t get notification of new tweets, it’s several clicks to even see a new tweet. It’s definitely got some more development before it has the same features as it did on my Nexus. * Buttons don’t give great feedback – I’d read this on the reviews about the HTC HD7 and I’m finding it true myself. Pressing the buttons on the side of the phone and the power button on the top is finicky and I have to be looking at my phone to make sure I actually got them to press. * Web browsing is slow – I’m not sure what’s up with this, I’m connected to my wireless network at my house but it’s noticeably slower on my WP7 device than my Nexus. I even switched back to verify and it’s definitely true. Retrieving tweets, hitting up the XNA forums and just general web activities are all much slower on my WP7. I can’t think of any reason this would be true but it almost seems like it’s not using my wireless for everything. Pros: * It’s pretty – the phone is really gorgeous. I loved the form of my Nexus One by the HTC HD7 is just as pretty, maybe even prettier! It’s got a nice large, bright screen. It feels good in my hand. And it even has a little kickstand to set the phone up for movie watching. Definitely a gorgeous phone. * LIVE integration – I lost a lot of nice integration with Google services but I gained a lot of integration with LIVE services that I also use. Now I can see when I get new GMail messages AND Hotmail messages. And having the Xbox LIVE integration is admittedly cool as well. * Tile notification rock – The Windows Phone 7 commercials are TRYING to get this message out but they’re doing a really poor job of this. Tile notifications really do save you from your phone. I have a whole little mini-informational dashboard at a glance. I unlock my phone and at a glace I can see new IMs, new mail messages, software updates etc. All just letting me know in the tiles I have arranged. That’s pretty cool. * The interface works really well – I feel super hip and cool swiping and sliding things around on my Windows Phone 7. Everything works that way and it’s great and fast and really good looking. I’m all about me feeling cool. * I’m gaming more – I had gotten a few games on my Nexus One but there really weren’t a lot of good developers flocking to the service. Just browsing through the Windows Phone 7 marketplace I’m already seeing a ton of games I want to try and buy. And I sat down and bet Pixel Man 0 just yesterday on my phone. I’m already gaming more than I did on my Nexus One. * Netflix integration is fantastic - It works just like it does on my Xbox 360 and I love having this feature on my phone. * It’s basically a Zune – I’ve been taking my Zune to work and listening to music off of that while I code. I no longer need to take it with me, now I just sync songs onto my phone and it’s my new Zune. I freaking love that. One less device to carry around. All in all my cons have really little to do with the phone (just the buttons and the web browsing) and more to do with the applications needing to catch up a bit to what I’m used to. And the Pros are things that ARE phone specific so I’m seeing that as a good sign that I’m going to be very happy with my Windows Phone 7. So Wifey is happy having her Nexus One again, I’m happy with my new Windows Phone 7. Life is good. Now I just need to make a game to pay for it….

Read the article

Visual Studio 2010 Productivity Tips and Tricks–Part 1: Extensions

- by ToStringTheory

I don’t know about you, but when it comes to development, I prefer my environment to be as free of clutter as possible. It may surprise you to know that I have tried ReSharper, and did not like it, for the reason that I stated above. In my opinion, it had too much clutter. Don’t get me wrong, there were a couple of features that I did like about it (inversion of if blocks, code feedback), but for the most part, I actually felt that it was slowing me down. Introduction Another large factor besides intrusiveness/speed in my choice to dislike ReSharper would probably be that I have become comfortable with my current setup and extensions. I believe I have a good collection, and am quite happy with what I can accomplish in a short amount of time. I figured that I would share some of my tips/findings regarding Visual Studio productivity here, and see what you had to say. The first section of things that I would like to cover, are Visual Studio Extensions. In case you have been living under a rock for the past several years, Extensions are available under the Tools menu in Visual Studio: The extension manager enables integrated access to the Microsoft Visual Studio Gallery online with access to a few thousand different extensions. I have tried many extensions, but for reasons of lack reliability, usability, or features, have uninstalled almost all of them. However, I have come across several that I find I can not do without anymore: NuGet Package Manager (Microsoft) Perspectives (Adam Driscoll) Productivity Power Tools (Microsoft) Web Essentials (Mads Kristensen) Extensions NuGet Package Manager To be honest, I debated on whether or not to put this in here. Most people seem to have it, however, there was a time when I didn’t, and was always confused when blogs/posts would say to right click and “Add Package Reference…” which with one of the latest updates is now “Manage NuGet Packages”. So, if you haven’t downloaded the NuGet Package Manager yet, or don’t know what it is, I would highly suggest downloading it now! Features Simply put, the NuGet Package Manager gives you a GUI and command line to access different libraries that have been uploaded to NuGet. Some of its features include: Ability to search NuGet for packages via the GUI, with information in the detail bar on the right. Quick access to see what packages are in a solution, and what packages have updates available, with easy 1-click updating. If you download a package that requires references to work on other NuGet packages, they will be downloaded and referenced automatically. Productivity Tip If you use any type of source control in Visual Studio as well as using NuGet packages, be sure to right-click on the solution and click "Enable NuGet Package Restore". What this does is add a NuGet package to the solution so that it will be checked in along side your solution, as well as automatically grab packages from NuGet on build if needed. This is an extremely simple system to use to manage your package references, instead of having to manually go into TFS and add the Packages folder. Perspectives I can't stand developing with just one monitor. Especially if it comes to debugging. The great thing about Visual Studio 2010, is that all of the panels and windows are floatable, and can dock to other screens. The only bad thing is, I don't use the same toolset with everything that I am doing. By this, I mean that I don't use all of the same windows for debugging a web application, as I do for coding a WPF application. Only thing is, Visual Studio doesn't save the screen positions for all of the undocked windows. So, I got curious one day and decided to check and see if there was an extension to help out. This is where I found Perspectives. Features Perspectives gives you the ability to configure window positions across any or your monitors, and then to save the positions in a profile. Perspectives offers a Panel to manage different presets/favorites, and a toolbar to add to the toolbars at the top of Visual Studio. Ability to 'Favorite' a profile to add it to the perspectives toolbar. Productivity Tip Take the time to setup profiles for each of your scenarios - debugging web/winforms/xaml, coding, maintenance, etc. Try to remember to use the profiles for a few days, and at the end of a week, you may find that your productivity was never better. Productivity Power Tools Ah, the Productivity Power Tools... Quite possibly one of my most used extensions, if not my most used. The tool pack gives you a variety of enhancements ranging from key shortcuts, interface tweaks, and completely new features to Visual Studio 2010. Features I don't want to bore you with all of the features here, so here are my favorite: Quick Find - Unobtrusive search box in upper-right corner of the code window. Great for searching in general, especially in a file. Solution Navigator - The 'Solution Explorer' on steroids. Easy to search for files, see defined members/properties/methods in files, and my favorite feature is the 'set as root' option. Updated 'Add Reference...' Dialog - This is probably my favorite enhancement period... The 'Add Reference...' dialog redone in a manner that resembles the Extension/Package managers. I especially love the ability to search through all of the references. "Ctrl - Click" for Definition - I am still getting used to this as I usually try to use my keyboard for everything, but I love the ability to hold Ctrl and turn property/methods/variables into hyperlinks, that you click on to see their definitions. Great for travelling down a rabbit hole in an application to research problems. While there are other commands/utilities, I find these to be the ones that I lean on the most for the usefulness. Web Essentials If you have do any type of web development in ASP .Net, ASP .Net MVC, even HTML, I highly suggest grabbing the Web Essentials right NOW! This extension alone is great for productivity in web development, and greatly decreases my development time on new features. Features Some of its best features include: CSS Previews - I say 'previews' because of the multiple kinds of previews in CSS that you get font-family, color, background/background-image previews. This is great for just tweaking UI slightly in different ways and seeing how they look in the CSS window at a glance. Live Preview - One word - awesome! This goes well with my multi-monitor setup. I put the site on one monitor in a Live Preview panel, and then as I make changes to CSS/cshtml/aspx/html, the preview window will update with each save/build automatically. For CSS, you can even turn on live-update, so as you are tweaking CSS, the style changes in real time. Great for tweaking colors or font-sizes. Outlining - Small, but I like to be able to collapse regions/declarations that are in the way of new work, or are just distracting. Commenting Shortcuts - I don't know why it wasn't included by default, but it is nice to have the key shortcuts for commenting working in the CSS editor as well. Productivity Tip When working on a site, hit CTRL-ALT-ENTER to launch the Live Preview window. Dock it to another monitor. When you make changes to the document/css, just save and glance at the other monitor. No need to alt tab, then alt tab before continuing editing. Conclusion These extensions are only the most useful and least intrusive - ones that I use every day. The great thing about Visual Studio 2010 is the extensibility options that it gives developers to utilize. Have an extension that you use that isn't intrusive, but isn't listed here? Please, feel free to comment. I love trying new things, and am always looking for new additions to my toolset of the most useful. Finally, please keep an eye out for Part 2 on key shortcuts in Visual Studio. Also, if you are visiting my site (http://tostringtheory.com || http://geekswithblogs.net/tostringtheory) from an actual browser and not a feed, please let me know what you think of the new styling!

Read the article

Why people don't patch and upgrade?!?

- by Mike Dietrich

Discussing the topic "Why Upgrade" or "Why not Upgrade" is not always fun. Actually the arguments repeat from customer to customer. Typically we hear things such as: A PSU or Patch Set introduces new bugs A new PSU or Patch Set introduces new features which lead to risk and require application verification Patching means risk Patching changes the execution plans Patching requires too much testing Patching is too much work for our DBAs Patching costs a lot of money and doesn't pay out And to be very honest sometimes it's hard for me to stay calm in such discussions. Let's discuss some of these points a bit more in detail. A PSU or Patch Set introduces new bugsWell, yes, that is true as no software containing more than some lines of code is bug free. This applies to Oracle's code as well as too any application or operating system code. But first of all, does that mean you never patch your OS because the patch may introduce new flaws? And second, what is the point of saying "it introduces new bugs"? Does that mean you will never get rid of the mean issues we know about and we fixed already? Scroll down from MOS Note:161818.1 to the patch release you are on, no matter if it's 10.2.0.4 or 11.2.0.3 and check for the Known Issues And Alerts.Will you take responsibility to know about all these issues and refuse to upgrade to 11.2.0.4? I won't. A new PSU or Patch Set introduces new featuresOk, we can discuss that. Offering new functionality within a database patch set is a dubious thing. It has advantages such as in 11.2.0.4 where we backported Database Redaction to. But this is something you will only use once you have an Advanced Security license. I interpret that statement I've heard quite often from customers in a different way: People don't want to get surprises such as new behaviour. This certainly gives everybody a hard time. And we've had many examples in the past (SESSION_CACHED_CURSROS in 10.2.0.4, _DATAFILE_WRITE_ERRORS_CRASH_INSTANCE in 11.2.0.2 and others) where those things weren't documented, not even in the README. Thanks to many friends out there I learned about those as well. So new behaviour is the topic people consider as risky - not really new features. And just to point this out: A PSU never brings in new features or new behaviour by definition! Patching means riskDoes it really mean risk? Yes, there were issues in the past (and sometimes in the present as well) where a patch didn't get installed correctly. But personally I consider it way more risky to not patch. Keep that in mind: The day Oracle publishes an PSU (or CPU) containing security fixes all the great security experts out there go public with their findings as well. So from that day on even my grandma can find out about those issues and try to attack somebody. Now a lot of people say: "My database does not face the internet." And I will answer: "The enemy is sitting already behind your firewalls. And knows potentially about these things." My statement: Not patching introduces way more risk to your environment than patching. Seriously! Patching changes the execution plansDo they really? I agree - there's a very small risk for this happening with Patch Sets. But not with PSUs or CPUs as they contain no optimizer fixes changing behaviour (but they may contain fixes curing wrong-query-result-bugs). But what's the point of a changing execution plan? In Oracle Database 11g it is so simple to be prepared. SQL Plan Management is a free EE feature - so once that occurs you'll put the plan into the Plan Baseline. Basta! Yes, you wouldn't like to get such surprises? Than please use the SQL Performance Analyzer (SPA) from Real Application Testing and you'll detect that easily upfront in minutes. And not to forget this, a plan change can also be very positive!Yes, there's a little risk with a database patchset - and we have many possibilites to detect this before patching. Patching requires too much testingWell, does it really? I have seen in the past 12 years how people test. There are very different efforts and approaches on this. I have seen people spending a hell of money on licenses or on project team staffing. And I have seen people sailing blindly without any tests just going the John-Wayne-approach.Proper tools will allow you to test easily without too much efforts. See the paragraph above. We have used Real Application Testing in so many customer projects reducing the amount of work spend on testing by over 50%. But apart from that at some point you will have to stop testing. If you don't you'll get lost and you'll burn money. There's no 100% guaranty. You will have to deal with a little risk as reaching the final 5% of certainty will cost you the same as it did cost to reach 95%. And doing this will lead to abnormal long product cycles that you'll run behind forever. And this will cost even more money. Patching is too much work for our DBAsPatching is a lot of work. I agree. And it's no fun work. It's boring, annoying. You don't learn much from that. That's why you should try to automate this task. Use the Database's Lifecycle Management Pack. And don't cry about the fact that it costs money. Yes it does. But it will ease the process and you'll save a lot of costs as you don't waste your valuable time with patching. Or use Oracle Database 12c Oracle Multitenant and patch either by unplug/plug or patch an entire container database with all PDBs with one patch in one task. We have customer reference cases proofing it saved them 75% of time, effort and cost since they've used Lifecycle Management Pack. So why don't you use it? Patching costs a lot of money and doesn't pay outWell, see my statements in the paragraph above. And it pays out as flying with a database with 100 known critical flaws in it which are already fixed by Oracle (such as in the Oct 2013 PSU for Oracle Database 12c) will cost ways more in case of failure or even data loss. Bet with me? Let me finally ask you some questions. What cell phone are you using and which OS does it run? Do you have an iPhone 5 and did you upgrade already to iOS 7.0.3? I've just encountered on mine that the alarm (which I rely on when traveling) has gotten now a dependency on the physical switch "sound on/off". If it is switched to "off" physically the alarm rings "silently". What a wonderful example of a behaviour change coming in with a patch set. Will this push you to stay with iOS5 or iOS6? No, because those have security flaws which won't be fixed anymore. What browser are you surfing with? Do you use Mozilla 3.6? Well, congratulations to all the hackers. It will be easy for them to attack you and harm your system. I'd guess you have the auto updater on. Same for Google Chrome, Safari, IE. Right? -Mike The T.htmtableborders, .htmtableborders td, .htmtableborders th {border : 1px dashed lightgrey ! important;} html, body { border: 0px; } body { background-color: #ffffff; } img, hr { cursor: default }

Read the article

Attaching a Command to the WP7 Application Bar.

- by mbcrump

One of the biggest problems that I’ve seen with people creating WP7 applications is how do you bind the application bar to a Relay Command. If your using MVVM then this is particular important. Let’s examine the code that one might add to start with. <phone:PhoneApplicationPage.ApplicationBar> <shell:ApplicationBar IsVisible="True" IsMenuEnabled="True"> <shell:ApplicationBarIconButton x:Name="appbar_button1" IconUri="/icons/appbar.questionmark.rest.png" Text="About"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <GalaSoft_MvvmLight_Command:EventToCommand Command="{Binding DisplayAbout, Mode=OneWay}" /> </i:EventTrigger> </i:Interaction.Triggers> </shell:ApplicationBarIconButton> <shell:ApplicationBar.MenuItems> <shell:ApplicationBarMenuItem x:Name="menuItem1" Text="MenuItem 1"></shell:ApplicationBarMenuItem> <shell:ApplicationBarMenuItem x:Name="menuItem2" Text="MenuItem 2"></shell:ApplicationBarMenuItem> </shell:ApplicationBar.MenuItems> </shell:ApplicationBar> </phone:PhoneApplicationPage.ApplicationBar> Everything looks right. But we quickly notice that we have a squiggly line under our Interaction.Triggers. The problem is that the object is not a FrameworkObject. This same code would have worked perfect if this were a normal button. OK. Point has been proved. Let’s make the ApplicationBar support Commands. So, go ahead and create a new project using MVVM Light. If you want to check out the source and work along side this tutorial then click here. 7 Easy Steps to have binding on the Application Bar using MVVM Light (I might add that you don’t have to use MVVM Light to get this functionality, I just prefer it.) 1) Download MVVM Light if you don’t already have it and install the project templates. It is available at http://mvvmlight.codeplex.com/. 2) Click File-New Project and navigate to Silverlight for Windows Phone. Make sure you use the MVVM Light (WP7) Template. 3) Now that we have our project setup and ready to go let’s download a wrapper created by Nicolas Humann here, it is called Phone7.Fx. After you download it then extract it somewhere that you can find it. This wrapper will make our application bar/menu item bindable. 4) Right click References inside your WP7 project and add the .dll file to your project. 5) In your MainPage.xaml you will need to add the proper namespace to it. Don’t forget to build your project afterwards. xmlns:Preview="clr-namespace:Phone7.Fx.Preview;assembly=Phone7.Fx.Preview" 6) Now you can add the BindableAppBar to your MainPage.xaml with a few lines of code. <Preview:BindableApplicationBar x:Name="AppBar" BarOpacity="1.0" > <Preview:BindableApplicationBarIconButton Command="{Binding DisplayAbout}" IconUri="/icons/appbar.questionmark.rest.png" Text="About" /> <Preview:BindableApplicationBar.MenuItems> <Preview:BindableApplicationBarMenuItem Text="Settings" Command="{Binding InputBox}" /> </Preview:BindableApplicationBar.MenuItems> </Preview:BindableApplicationBar> So your final MainPage.xaml will look similar to this: NOTE: The AppBar will be located inside of the Grid using this wrapper.  <Grid x:Name="LayoutRoot" Background="Transparent"> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="*" /> </Grid.RowDefinitions>  <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="24,24,0,12"> <TextBlock x:Name="ApplicationTitle" Text="{Binding ApplicationTitle}" Style="{StaticResource PhoneTextNormalStyle}" /> <TextBlock x:Name="PageTitle" Text="{Binding PageName}" Margin="-3,-8,0,0" Style="{StaticResource PhoneTextTitle1Style}" /> </StackPanel>  <Grid x:Name="ContentGrid" Grid.Row="1"> <TextBlock Text="{Binding Welcome}" Style="{StaticResource PhoneTextNormalStyle}" HorizontalAlignment="Center" VerticalAlignment="Center" FontSize="40" /> </Grid> <Preview:BindableApplicationBar x:Name="AppBar" BarOpacity="1.0" > <Preview:BindableApplicationBarIconButton Command="{Binding DisplayAbout}" IconUri="/icons/appbar.questionmark.rest.png" Text="About" /> <Preview:BindableApplicationBar.MenuItems> <Preview:BindableApplicationBarMenuItem Text="Settings" Command="{Binding InputBox}" /> </Preview:BindableApplicationBar.MenuItems> </Preview:BindableApplicationBar> </Grid> 7) Let’s go ahead and create the RelayCommands and write them up to a MessageBox by editing our MainViewModel.cs file. public class MainViewModel : ViewModelBase { public string ApplicationTitle { get { return "MVVM LIGHT"; } } public string PageName { get { return "My page:"; } } public string Welcome { get { return "Welcome to MVVM Light"; } } public RelayCommand DisplayAbout { get; private set; } public RelayCommand InputBox { get; private set; } /// <summary> /// Initializes a new instance of the MainViewModel class. /// </summary> public MainViewModel() { if (IsInDesignMode) { // Code runs in Blend --> create design time data. } else { DisplayAbout = new RelayCommand(() => { MessageBox.Show("About box called!"); }); InputBox = new RelayCommand(() => { MessageBox.Show("settings button called"); }); } } If you run the project now you should get something similar to this (notice the AppBar at the bottom): Now if you hit the question mark then you will get the following MessageBox: The MenuItem works as well so for Settings: As you can see, its pretty easy to add a Command to the ApplicationBar/MenuItem. If you want to look through the full source code then click here. Subscribe to my feed

Read the article

MapReduce in DryadLINQ and PLINQ

- by JoshReuben

MapReduce See http://en.wikipedia.org/wiki/Mapreduce The MapReduce pattern aims to handle large-scale computations across a cluster of servers, often involving massive amounts of data. "The computation takes a set of input key/value pairs, and produces a set of output key/value pairs. The developer expresses the computation as two Func delegates: Map and Reduce. Map - takes a single input pair and produces a set of intermediate key/value pairs. The MapReduce function groups results by key and passes them to the Reduce function. Reduce - accepts an intermediate key I and a set of values for that key. It merges together these values to form a possibly smaller set of values. Typically just zero or one output value is produced per Reduce invocation. The intermediate values are supplied to the user's Reduce function via an iterator." the canonical MapReduce example: counting word frequency in a text file. MapReduce using DryadLINQ see http://research.microsoft.com/en-us/projects/dryadlinq/ and http://connect.microsoft.com/Dryad DryadLINQ provides a simple and straightforward way to implement MapReduce operations. This The implementation has two primary components: A Pair structure, which serves as a data container. A MapReduce method, which counts word frequency and returns the top five words. The Pair Structure - Pair has two properties: Word is a string that holds a word or key. Count is an int that holds the word count. The structure also overrides ToString to simplify printing the results. The following example shows the Pair implementation. public struct Pair { private string word; private int count; public Pair(string w, int c) { word = w; count = c; } public int Count { get { return count; } } public string Word { get { return word; } } public override string ToString() { return word + ":" + count.ToString(); } } The MapReduce function that gets the results. the input data could be partitioned and distributed across the cluster. 1. Creates a DryadTable<LineRecord> object, inputTable, to represent the lines of input text. For partitioned data, use GetPartitionedTable<T> instead of GetTable<T> and pass the method a metadata file. 2. Applies the SelectMany operator to inputTable to transform the collection of lines into collection of words. The String.Split method converts the line into a collection of words. SelectMany concatenates the collections created by Split into a single IQueryable<string> collection named words, which represents all the words in the file. 3. Performs the Map part of the operation by applying GroupBy to the words object. The GroupBy operation groups elements with the same key, which is defined by the selector delegate. This creates a higher order collection, whose elements are groups. In this case, the delegate is an identity function, so the key is the word itself and the operation creates a groups collection that consists of groups of identical words. 4. Performs the Reduce part of the operation by applying Select to groups. This operation reduces the groups of words from Step 3 to an IQueryable<Pair> collection named counts that represents the unique words in the file and how many instances there are of each word. Each key value in groups represents a unique word, so Select creates one Pair object for each unique word. IGrouping.Count returns the number of items in the group, so each Pair object's Count member is set to the number of instances of the word. 5. Applies OrderByDescending to counts. This operation sorts the input collection in descending order of frequency and creates an ordered collection named ordered. 6. Applies Take to ordered to create an IQueryable<Pair> collection named top, which contains the 100 most common words in the input file, and their frequency. Test then uses the Pair object's ToString implementation to print the top one hundred words, and their frequency. public static IQueryable<Pair> MapReduce( string directory, string fileName, int k) { DryadDataContext ddc = new DryadDataContext("file://" + directory); DryadTable<LineRecord> inputTable = ddc.GetTable<LineRecord>(fileName); IQueryable<string> words = inputTable.SelectMany(x => x.line.Split(' ')); IQueryable<IGrouping<string, string>> groups = words.GroupBy(x => x); IQueryable<Pair> counts = groups.Select(x => new Pair(x.Key, x.Count())); IQueryable<Pair> ordered = counts.OrderByDescending(x => x.Count); IQueryable<Pair> top = ordered.Take(k); return top; } To Test: IQueryable<Pair> results = MapReduce(@"c:\DryadData\input", "TestFile.txt", 100); foreach (Pair words in results) Debug.Print(words.ToString()); Note: DryadLINQ applications can use a more compact way to represent the query: return inputTable .SelectMany(x => x.line.Split(' ')) .GroupBy(x => x) .Select(x => new Pair(x.Key, x.Count())) .OrderByDescending(x => x.Count) .Take(k); MapReduce using PLINQ The pattern is relevant even for a single multi-core machine, however. We can write our own PLINQ MapReduce in a few lines. the Map function takes a single input value and returns a set of mapped values àLINQ's SelectMany operator. These are then grouped according to an intermediate key à LINQ GroupBy operator. The Reduce function takes each intermediate key and a set of values for that key, and produces any number of outputs per key à LINQ SelectMany again. We can put all of this together to implement MapReduce in PLINQ that returns a ParallelQuery<T> public static ParallelQuery<TResult> MapReduce<TSource, TMapped, TKey, TResult>( this ParallelQuery<TSource> source, Func<TSource, IEnumerable<TMapped>> map, Func<TMapped, TKey> keySelector, Func<IGrouping<TKey, TMapped>, IEnumerable<TResult>> reduce) { return source .SelectMany(map) .GroupBy(keySelector) .SelectMany(reduce); } the map function takes in an input document and outputs all of the words in that document. The grouping phase groups all of the identical words together, such that the reduce phase can then count the words in each group and output a word/count pair for each grouping: var files = Directory.EnumerateFiles(dirPath, "*.txt").AsParallel(); var counts = files.MapReduce( path => File.ReadLines(path).SelectMany(line => line.Split(delimiters)), word => word, group => new[] { new KeyValuePair<string, int>(group.Key, group.Count()) });

Read the article

Webcast Q&A: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter

- by kellsey.ruppel

Last Thursday we had the second webcast in our WebCenter in Action webcast series, "Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter, where customer Michael Chander from Qualcomm and Vince Casarez & Gourav Goyal from Oracle Partner Keste shared how Oracle WebCenter is powering Qualcomm’s externally facing website and providing a seamless experience for their customers. In case you missed it, here's a recap of the Q&A. Mike Chandler, Qualcomm Q: Did you run into any issues when integrating all of the different applications together?A: Definitely, our main challenges were in the area of user provisioning and security propagation, all the standard stuff you might expect when hooking up SSO for authentication and authorization. In addition, we spent several iterations getting the UI’s in sync. While everyone was given the same digital material to build too, each team interpreted and implemented it their own way. Initially as a user navigated, if you were looking for it, you could slight variations in color or font or width , stuff like that. So we had to pull all the developers responsible for the UI together and get pixel level agreement on a lot of things so we could ensure seamless transitions across applications. Q: What has been the biggest benefit your end users have seen?A: Wow, there have been several. An SSO enabled environment was huge a win for our users. The portal application that this replaced had not really been invested in by the business. With this project, we had full business participation and backing, and it really showed in some key areas like the shopping experience. For example, while ordering in the previous site, the items did not have any pictures or really usable descriptions. A tremendous amount of work was done to try and make the site more intuitive and user friendly. Site performance has also drastically improved thanks to new hardware, improved database design, and of course the fact that ADF has made great strides in runtime performance. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: Within a large company, I’m sure there is always going to be competition for large projects, as there was here. Once we got through the technical analysis and settled on the technology choices, it was actually no resistance to implementing the solution. This project was fully driven by the business with the aim of long term growth. I can confidently say that the fact that this project was given the utmost importance by both the business and IT really help put down any resistance that you would typically see while implementing a new solution. Q: Given the performance, what do you estimate to be the top end capacity of the system? A:I think our top end capacity is really only limited by our hardware. I’m comfortable saying we could grow 10x on our current hardware, both in terms of transactions and users. We can easily spin up new JVM instances if needed. We already use less JVM’s than we had planned. In addition, ADF is doing a very good job with his connection pooling and application module pooling, so we see a very good ratio of users connected to the systems vs db connections, without impacting performace. Q: What's the overview or summary of feedback from the users interacting with the site?A: Feedback has been overwhelmingly positive from both the business and our customers. They’re very happy with the new SSO environment , the new LAF, and the performance of the site. Of course, it’s not all roses. No matter what, there are always going to be people that don’t like the layout or the color scheme, etc. By and large though, customers are happy and the business is happy. Q: Can you describe the impressions about the site before and after the project within Qualcomm?A: Before the project, the site worked and people were using it, but most people were not happy with it. It was slow and tended to be a bit tempermental, for example a user would perform a transaction and the system would throw and unexpected error. The user could back up and retry the steps and things would work fine, so why didn’t work the first time?. From a UI perspective, we’d hear comments like it looked like it was built by a high school student. Vince Casarez & Gourav Goyal, Keste Q: Did you run into any obstacles when implementing the solution?A: It's interesting some people call them "obstacles" on this project we just called them "dependencies". There were both technical and business related dependencies that we had to work out. Mike points out the SSO dependencies and the coordination and synchronization between the teams to have a seamless login experience and a seamless end user experience. There was also a set of dependencies on the User Acceptance testing to make sure that everyone understood the use cases for how the system would be used. With a branching into a new market and trying to match a simple user experience as many consumer sites have today, there was always a tendency for the team members to provide their suggestions on how things could be simpler. But with all the work up front on the user design and getting the business driving this set of experiences, this minimized the downstream suggestions that tend to distract a team. In this case, all the work up front allowed us to enumerate the "dependencies" and keep the distractions to a minimum. Q: Was there a lot of custom work that needed to be done for this particular solution?A: The focus for this particular solution was really on the custom processes. The interesting thing is that with the data flows and the integration with applications, there are some pre-built integrations, but realistically for the process flow, we had to build those. The framework and tooling we used made things easier so we didn’t have to implement core functionality, like transitioning from screen to screen or from flow to flow. The design feature of Task Flows really helped speed the development and keep the component infrastructure in line with the dynamic processes. Task flows and other elements like Skins are core to the infrastructure or technology stack of Oracle. This then allowed the team to center the project focus around the business flows and use cases to meet the core requirements and keep the project on time. Q: What do you think were the keys to success for rolling out WebCenter?A: The 5 main keys to success were: 1) Sponsorship from the whole organization around this project from senior executive agreement, business owners driving functionality, and IT development alignment; 2) Upfront design planning and use case definition to clearly define the project scope and requirements; 3) Focussed development and project management aligned with the top level goals and drivers; 4) User acceptance and usability testing along the way to identify potential issues and direct resolution of the issues; and 5) Constant prioritization of the issues for development to fix by the business. It also helps to have great team chemistry and really smart people working on the project. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action! Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter from Oracle WebCenter

Read the article

5 Ways Android Still Disappoints (Me)

- by TStewartDev

Let me make this clear: I'm annoyed with Apple. I don't like their current policies and I don't like where Steve Jobs is taking the company. In general, I don't like it when any one company gets too much control in a market. When that happens, the leading company dictates the game and as consumers, our options all but disappear. That said, I'm still going to buy a new iPhone next week. My Apple-hating friends seem to desperately want me to go Android instead, but frankly, it's not good enough for me, and here are the reasons why. The Modern WinMo One of the reasons that Microsoft has identified for Windows Mobile's rapid decline is the breadth of hardware. They exercised little control over manufacturer's implementations. In theory, that sounds great. We as consumers have lots of choice. In practice, though, it meant among other things that updates to the devices were left up to the manufacturers. As a result, that rarely happened. (I'm still bitter at Toshiba for leaving me hanging back in 2002.) And now, Google is doing the same thing with Android. Case in point: my wife has a Motorola Backflip that we bought in April. It was released in March. Motorola says it will get Android 2.1 "sometime in Q3". Great. Meanwhile, I pull down the latest version of iPhone OS (now iOS) and install it the same day it's released. You may say that I can't judge Android by one lazy manufacturer. Yup, I sure can. With Apple, my original iPhone has been supported perfectly for 3 years. With Android, I will have to wait for upgrades after Google releases them, possibly indefinitely. Not cool. AT&T We signed a new contract with AT&T in April to get my wife's phone. I've had a reasonable experience with them. I don't imagine my experience with Verizon would be any better, and I'm relatively confident that Sprint doesn't have the coverage it takes to work well for us. The fact is, AT&T, for whatever reason, doesn't have jack for Android phones. May not be Android's fault, but it's still a shortcoming that prevents me from having it just like the iPhone's exclusivity keeps some folks on other networks from having it. Innovation? What Innovation? Android has a nice dashboard and a great notification system and… nothing else original. I keep reading about how disappointing the iPhone is nowadays. "It has no innovation," people say. Who does? Android has modeled its behavior after the iPhone. That's fine, but if all you've got is a similar product and I'm invested both skill-wise and app-wise in my current platform, why should I change? Microsoft's new Windows Phone 7 looks somewhat innovative, and I'm pretty excited to see what they'll bring to the table, but that's another six months away, at least. I've got a 3 year old phone that has some annoying issues now (thanks to recent encounters with water). I need a new phone now. Is This Going to Work? There's no shortage of criticism of Apple over its App Store policies, and I've vented my own anger about it. However, I will give them credit: their screening of apps has done a great job of weeding out the crap and gives an excellent indication that the app will work on my device. How about Android? Nope. It might work on your phone. Maybe. You'll have to try it to see. Get burned by it? Well, write a nasty review to try to keep others from making the mistake you did. If you don't mind doing that stuff, then Android is the platform for you. Personally, I'd rather have a receptionist screening out the telemarketing and survey calls than hang up on them myself, but that's your call. Slow, Slowing, Slower All this yapping about multitasking. This is an area I've been on Apple's side from the beginning. Sorry folks, but this is the number one reason I hated Windows Mobile: the longer you use it, the slower it gets because it doesn't kill apps. I'm with Steve Jobs on this one: if you see a task manager, we're doing it wrong. I don't want to have to manually kill apps. I hate doing that on Windows let alone on a mobile device. To me, priority one should be keeping the device speedy. Waiting for your device to respond is unacceptable. Bonus! Taken from iPhone Letdown? 8 Things Apple Didn't Announce, here are my responses: 4G Yeah, let me know if your area actually has it. I live in Lincoln, Nebraska. No carrier is going to have 4G here for at least 3 years. Meanwhile, you still get to pay for it. Yay! Cloud iTunes/OTA Sync You got me here. Of course, whether or not your Android device will be able to do it is always a good question. 3G Video Chat You got me here, too. I'm sure you spent countless hours in front of your phone with video chat. Also, I can't wait for the "No Video Chat While Driving" laws. Mobile Hotspot This is a neat feature, but as the author points out, it's left up to the carrier whether to implement it or not. Pretty sure any Android phones that come to AT&T won't have this enabled in the foreseeable future. Is Verizon even allowing this? I just figured Sprint was because they're failing so hard at keeping customers. Free MobileMe I use Google's services with my iPhone. The only people I know who use MobileMe are Apple fanboys and fangirls. If you choose to pay for a service that you can get for free, that's your decision, not Apple's. Voice Input Voice input has been available on phones (even "dumb" phones) for years now. iPhone does have the ability, though limited. Why don't I hear people telling their phones what to do? Maybe because it's still easier to use your fingers than talk to it. Get back to me when this becomes an important feature. Free Navigation Maybe this will be a bigger deal to me now that I'm getting a phone with GPS, but when using my buddy's 3gs, Google maps has worked just fine. Maybe I just don't trust turn-by-turn navigation enough to want it. Dashboard The only legitimate complaint on this list, to me. iPhone's home screen is pathetic, doubly so for the iPad. What a waste of perfectly usable space. I also want to add notifications to this list. Android's notification panel is far superior to the iPhone's. I don't want to hunt all over my screen to find little red dots. Put 'em in one place, Apple.

Read the article

Using IIS Logs for Performance Testing with Visual Studio

- by Tarun Arora

In this blog post I’ll show you how you can play back the IIS Logs in Visual Studio to automatically generate the web performance tests. You can also download the sample solution I am demo-ing in the blog post. Introduction Performance testing is as important for new websites as it is for evolving websites. If you already have your website running in production you could mine the information available in IIS logs to analyse the dense zones (most used pages) and performance test those pages rather than wasting time testing & tuning the least used pages in your application. What are IIS Logs To help with server use and analysis, IIS is integrated with several types of log files. These log file formats provide information on a range of websites and specific statistics, including Internet Protocol (IP) addresses, user information and site visits as well as dates, times and queries. If you are using IIS 7 and above you will find the log files in the following directory C:\Interpub\Logs\ Walkthrough 1. Download and Install Log Parser from the Microsoft download Centre. You should see the LogParser.dll in the install folder, the default install location is C:\Program Files (x86)\Log Parser 2.2. LogParser.dll gives us a library to query the iis log files programmatically. By the way if you haven’t used Log Parser in the past, it is a is a powerful, versatile tool that provides universal query access to text-based data such as log files, XML files and CSV files, as well as key data sources on the Windows operating system such as the Event Log, the Registry, the file system, and Active Directory. More details… 2. Create a new test project in Visual Studio. Let’s call it IISLogsToWebPerfTestDemo. 3. Delete the UnitTest1.cs class that gets created by default. Right click the solution and add a project of type class library, name it, IISLogsToWebPerfTestEngine. Delete the default class Program.cs that gets created with the project. 4. Under the IISLogsToWebPerfTestEngine project add a reference to Microsoft.VisualStudio.QualityTools.WebTestFramework – c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PublicAssemblies\Microsoft.VisualStudio.QualityTools.WebTestFramework.dll LogParser also called MSUtil - c:\users\tarora\documents\visual studio 2010\Projects\IisLogsToWebPerfTest\IisLogsToWebPerfTestEngine\obj\Debug\Interop.MSUtil.dll 5. Right click IISLogsToWebPerfTestEngine project and add a new classes – IISLogReader.cs The IISLogReader class queries the iis logs using the log parser. using System; using System.Collections.Generic; using System.Text; using MSUtil; using LogQuery = MSUtil.LogQueryClassClass; using IISLogInputFormat = MSUtil.COMIISW3CInputContextClassClass; using LogRecordSet = MSUtil.ILogRecordset; using Microsoft.VisualStudio.TestTools.WebTesting; using System.Diagnostics; namespace IisLogsToWebPerfTestEngine { // By making use of log parser it is possible to query the iis log using select queries public class IISLogReader { private string _iisLogPath; public IISLogReader(string iisLogPath) { _iisLogPath = iisLogPath; } public IEnumerable<WebTestRequest> GetRequests() { LogQuery logQuery = new LogQuery(); IISLogInputFormat iisInputFormat = new IISLogInputFormat(); // currently these columns give us suffient information to construct the web test requests string query = @"SELECT s-ip, s-port, cs-method, cs-uri-stem, cs-uri-query FROM " + _iisLogPath; LogRecordSet recordSet = logQuery.Execute(query, iisInputFormat); // Apply a bit of transformation while (!recordSet.atEnd()) { ILogRecord record = recordSet.getRecord(); if (record.getValueEx("cs-method").ToString() == "GET") { string server = record.getValueEx("s-ip").ToString(); string path = record.getValueEx("cs-uri-stem").ToString(); string querystring = record.getValueEx("cs-uri-query").ToString(); StringBuilder urlBuilder = new StringBuilder(); urlBuilder.Append("http://"); urlBuilder.Append(server); urlBuilder.Append(path); if (!String.IsNullOrEmpty(querystring)) { urlBuilder.Append("?"); urlBuilder.Append(querystring); } // You could make substitutions by introducing parameterized web tests. WebTestRequest request = new WebTestRequest(urlBuilder.ToString()); Debug.WriteLine(request.UrlWithQueryString); yield return request; } recordSet.moveNext(); } Console.WriteLine(" That's it! Closing the reader"); recordSet.close(); } } } 6. Connect the dots by adding the project reference ‘IisLogsToWebPerfTestEngine’ to ‘IisLogsToWebPerfTest’. Right click the ‘IisLogsToWebPerfTest’ project and add a new class ‘WebTest1Coded.cs’ The WebTest1Coded.cs inherits from the WebTest class. By overriding the GetRequestMethod we can inject the log files to the IISLogReader class which uses Log parser to query the log file and extract the web requests to generate the web test request which is yielded back for play back when the test is run. namespace IisLogsToWebPerfTest { using System; using System.Collections.Generic; using System.Text; using Microsoft.VisualStudio.TestTools.WebTesting; using Microsoft.VisualStudio.TestTools.WebTesting.Rules; using IisLogsToWebPerfTestEngine; // This class is a coded web performance test implementation, that simply passes // the path of the iis logs to the IisLogReader class which does the heavy // lifting of reading the contents of the log file and converting them to tests. // You could have multiple such classes that inherit from WebTest and implement // GetRequestEnumerator Method and pass differnt log files for different tests. public class WebTest1Coded : WebTest { public WebTest1Coded() { this.PreAuthenticate = true; } public override IEnumerator<WebTestRequest> GetRequestEnumerator() { // substitute the highlighted path with the path of the iis log file IISLogReader reader = new IISLogReader(@"C:\Demo\iisLog1.log"); foreach (WebTestRequest request in reader.GetRequests()) { yield return request; } } } } 7. Its time to fire the test off and see the iis log playback as a web performance test. From the Test menu choose Test View Window you should be able to see the WebTest1Coded test show up. Highlight the test and press Run selection (you can also debug the test in case you face any failures during test execution). 8. Optionally you can create a Load Test by keeping ‘WebTest1Coded’ as the base test. Conclusion You have just helped your testing team, you now have become the coolest developer in your organization! Jokes apart, log parser and web performance test together allow you to save a lot of time by not having to worry about what to test or even worrying about how to record the test. If you haven’t already, download the solution from here. You can take this to the next level by using LogParser to extract the log files as part of an end of day batch to a database. See the usage trends by user this solution over a longer term and have your tests consume the web requests now stored in the database to generate the web performance tests. If you like the post, don’t forget to share … Keep RocKiNg!

Read the article

CodePlex Daily Summary for Monday, August 18, 2014

CodePlex Daily Summary for Monday, August 18, 2014Popular ReleasesMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...WallSwitch: WallSwitch 1.2.5: Version 1.2.5 Changes: Added support for sequential order in collage mode. Added option to display multiple images per switch in collage mode. Fixed bug where border width wasn't being loaded properly, and was reverting to default values. Fixed bug where sequential order was repeating images on multiple monitors. Decreased likelihood of random images being repeated.OpenCppCoverage: OpenCppCoverage 0.9.1: - Add Jenkins support. - Command line argument can be placed inside a config file. If you do not have Visual Studio C++ 2013 you need to download redistributable packages: http://www.microsoft.com/en-us/download/details.aspx?id=40784Easy Backup Windows Service: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Force run program as administrator by default. Add 'everyday' schedule element. Update solution to VS 2013.Easy Backup Application: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Fix app location initialization. Force run program as administrator by default. Update solution to VS 2013.TEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????（???-5929）。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????（LZOM-5932）。 -BodyPadding???????，??“5”“5 10”，???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????，??????????????（Jango_Jing-5450）。 -???????????DataKeyNames???????????（yygy-6002）。 -????????????????????????（Gnid-6018）。 -??PageManager???AutoSizePanelID????，??????????????????（yygy-6008）。 -?FState???????????????，????????????????（????-5925）。 -??????OnClientClick???return?????????（FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeEWSEditor: EwsEditor 1.10 Release: • Export and import of items as a full fidelity steam works - without proxy classes! - I used raw EWS POSTs. • Turned off word wrap for EWS request field in EWS POST windows. • Several windows with scrolling texts boxes were limiting content to 32k - I removed this restriction. • Split server timezone info off to separate menu item from the timezone info windows so that the timezone info window could be used without logging into a mailbox. • Lots of updates to the TimeZone window. • UserAgen...New Projectsballmon: ballmonExchange Database Recovery With and Without Log Files is Possible: This segments giving an overview of Exchange Server transaction log files. It describes process how users can recover their database with & without log filesFabs.Net: Ego tatmini ve gelisme amaçli yaptigim bir projedir.JacoChat: JacoChat is a simple chatting interface that uses my personal webserver as a "wall" for people to chat on.ManagedWin32: ManagedWin32 is a library that exposes the Win32 API to .NET applications.Open XML Extensions: The project provides additions to the Open XML SDK and related projects (e.g., PowerTools for Open XML), starting with MemoryStreams for Open XML Documents.orntic: Project for insurace companyTBOX: The Treasure Box Library: TBOX is a mutli-platform c library for unix, windows, mac, ios, android, etc. It includes asio, stream, container, algorithm, xml and other library modules.WeatherTS: Typescript weather application.?????@/????: ??????????????:????,????,????,???????,????????,??????:????????,?????! ?????????: ????????????????????,????????:??、??、???,?????????????????????! ????-??: ??????????????，????，???????????????。

Read the article

Consuming ASP.NET Web API services from PHP script

- by DigiMortal

I introduced ASP.NET Web API in some of my previous posts. Although Web API is easy to use in ASP.NET web applications you can use Web API also from other platforms. This post shows you how to consume ASP.NET Web API from PHP scripts. Here are my previous posts about Web API: How content negotiation works? ASP.NET Web API: Extending content negotiation with new formats Query string based content formatting Although these posts cover content negotiation they give you some idea about how Web API works. Test application On Web API side I use the same sample application as in previous Web API posts – very primitive web application to manage contacts. Listing contacts On the other machine I will run the following PHP script that works against my Web API application: <?php // request list of contacts from Web API $json = file_get_contents('http://vs2010dev:3613/api/contacts/'); // deserialize data from JSON $contacts = json_decode($json); ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> </head> <body> <table> <?php foreach($contacts as $contact) { ?> <tr> <td valign="top"> <?php echo $contact->FirstName ?> </td> <td valign="top"> <?php echo $contact->LastName ?> </td> <td valign="middle"> <form method="POST"> <input type="hidden" name="id" value="<?php echo $contact-/>Id ?>" /> <input type="submit" name="cmd" value="Delete"/> </form> </td> </tr> <?php } ?> </table> </body> </html> Notice how easy it is to handle JSON data in PHP! My PHP script produces the following output: Looks like data is here as it should be. Deleting contacts Now let’s write code to delete contacts. Add this block of code before any other code in PHP script. if(@$_POST['cmd'] == 'Delete') { $errno = 0; $errstr = ''; $id = @$_POST['id']; $params = array('http' => array( 'method' => 'DELETE', 'content' => "" )); $url = 'http://vs2010dev:3613/api/contacts/'.$id; $ctx = stream_context_create($params); $fp = fopen($url, 'rb', false, $ctx); if (!$fp) { $res = false; } else { $res = stream_get_contents($fp); } fclose($fp); header('Location: /json.php'); exit; } Again simple code. If we write also insert and update methods we may want to bundle those operations to single class. Conclusion ASP.NET Web API is not only ASP.NET fun. It is available also for all other platforms. In this posting we wrote simple PHP client that is able to communicate with our Web API application. We wrote only some simple code, nothing complex. Same way we can use also platforms like Java, PERL and Ruby.

Read the article

Protecting Cookies: Once and For All

- by Your DisplayName here!

Every once in a while you run into a situation where you need to temporarily store data for a user in a web app. You typically have two options here – either store server-side or put the data into a cookie (if size permits). When you need web farm compatibility in addition – things become a little bit more complicated because the data needs to be available on all nodes. In my case I went for a cookie – but I had some requirements Cookie must be protected from eavesdropping (sent only over SSL) and client script Cookie must be encrypted and signed to be protected from tampering with Cookie might become bigger than 4KB – some sort of overflow mechanism would be nice I really didn’t want to implement another cookie protection mechanism – this feels wrong and btw can go wrong as well. WIF to the rescue. The session management feature already implements the above requirements but is built around de/serializing IClaimsPrincipals into cookies and back. But if you go one level deeper you will find the CookieHandler and CookieTransform classes which contain all the needed functionality. public class ProtectedCookie { private List<CookieTransform> _transforms; private ChunkedCookieHandler _handler = new ChunkedCookieHandler(); // DPAPI protection (single server) public ProtectedCookie() { _transforms = new List<CookieTransform> { new DeflateCookieTransform(), new ProtectedDataCookieTransform() }; } // RSA protection (load balanced) public ProtectedCookie(X509Certificate2 protectionCertificate) { _transforms = new List<CookieTransform> { new DeflateCookieTransform(), new RsaSignatureCookieTransform(protectionCertificate), new RsaEncryptionCookieTransform(protectionCertificate) }; } // custom transform pipeline public ProtectedCookie(List<CookieTransform> transforms) { _transforms = transforms; } public void Write(string name, string value, DateTime expirationTime) { byte[] encodedBytes = EncodeCookieValue(value); _handler.Write(encodedBytes, name, expirationTime); } public void Write(string name, string value, DateTime expirationTime, string domain, string path) { byte[] encodedBytes = EncodeCookieValue(value); _handler.Write(encodedBytes, name, path, domain, expirationTime, true, true, HttpContext.Current); } public string Read(string name) { var bytes = _handler.Read(name); if (bytes == null || bytes.Length == 0) { return null; } return DecodeCookieValue(bytes); } public void Delete(string name) { _handler.Delete(name); } protected virtual byte[] EncodeCookieValue(string value) { var bytes = Encoding.UTF8.GetBytes(value); byte[] buffer = bytes; foreach (var transform in _transforms) { buffer = transform.Encode(buffer); } return buffer; } protected virtual string DecodeCookieValue(byte[] bytes) { var buffer = bytes; for (int i = _transforms.Count; i > 0; i—) { buffer = _transforms[i - 1].Decode(buffer); } return Encoding.UTF8.GetString(buffer); } } HTH

Read the article

Combining Shared Secret and Certificates

- by Michael Stephenson

As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also combine this with certificates so that you can identify the sender of the message. Prerequisites As in the previous article before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz Setting up the Certificates To keep the post and sample simple I am going to use the local computer store for all certificates but this bit is really just the same as setting up certificates for an example where you are using WCF without using Windows Azure Service Bus. In the sample I have included two batch files which you can use to create the sample certificates or remove them. Basically you will end up with: A certificate called PocServerCert in the personal store for the local computer which will be used by the WCF Service component A certificate called PocClientCert in the personal store for the local computer which will be used by the client application A root certificate in the Root store called PocRootCA with its associated revocation list which is the root from which the client and server certificates were created For the sample Im just using development certificates like you would normally, and you can see exactly how these are configured and placed in the stores from the batch files in the solution using makecert and certmgr. The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.Cert.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later. The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our certificate like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS. The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element. Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the certificate stuff in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use the clientCertificate check and also specifying the serviceCertificate with information on how to find the servers certificate in the store. I have also added a serviceAuthorization section where I will implement my own authorization component to perform additional security checks after the service has validated that the message was signed with a good certificate. I also have the same serviceSecurityAudit configuration to log access to my service. My Authorization Manager The below picture shows you implementation of my authorization manager. WCF will eventually hand off the message to my authorization component before it calls the service code. This is where I can perform some logic to check if the identity is allowed to access resources. In this case I am simple rejecting messages from anyone except the PocClientCertificate. The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a certificate over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding. Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the token from a certificate with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message. After the binding we need to configure the endpoint behavior like in the below picture. This contains the normal transportClientEndpointBehaviour to setup the ACS shared secret configuration but we have also configured the clientCertificate to look for the PocClientCert. Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF in exactly the normal way but the configuration will jump in and ensure that a token is passed representing the client certificate. Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and certificate based token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.Cert.zip

Read the article

How To: Using SimpleMembserhipProvider with MySql Connector/Net.

- by Francisco Tirado

Now on Connector/Net 6.9 the users will have the ability to use SimpleMembership Provider on MVC4 templates. The configuration is very simple and also have compatibility with OAuth, in this post we'll explain step by step how to configure it in a MVC 4 Web Application. Requirements The requirements to use SimpleMembership with Connector/Net are: Install Connector/Net 6.9, or download the No Install version. Net Framework 4.0 or greater. MVC 4 Visual Studio 2012 or newer version Creating and configuring a new project In this example we'll use VS2012 to create the project basis on the Internet Aplication template and using Entity Framework to manage the User model. Open VS 2012 and create a new project, we'll create a new MVC 4 Web Application and configure the project to use Net Framework 4.5. Type a name for the project and then click “Ok”. In the next dialog we'll choose the “Internet Application” template and use Razor as engine without creating a test project. Click “Ok” to continue. Now we have a new project with the templates necessaries to run a Web Application with the default values. We'll use the current files to continue working. If you have installed Connector/Net you can skip this step, if you don't have installed but you're planning to do it, please install it and continue with the next step. If you're using the No Install version of Connector/Net we'll need to add the references to our project, the assemblies needed are: MySql.Data, MySql.Data.Entities and MySql.Web. Be sure that the assemblies chosen match the Net Framework version used in our project and the MySql.Data.Entities is compatible with EF5 (EF5 is the default added by the project). Now open the “web.config” file, and under the <connectionStrings> node add a connection string that points to a MySql instance. We'll use the following connection configuration: <add name="MyConnection" connectionString="server=localhost;UserId=root;password=pass;database=MySqlSimpleMembership;" providerName="MySql.Data.MySqlClient"/> Under the node <system.web> we'll add the following configuration: <membership defaultProvider="MySqlSimpleMembershipProvider"><providers><clear/><add name="MySqlSimpleMembershipProvider" type="MySql.Web.Security.MySqlSimpleMembershipProvider,MySql.Web,Version=6.9.3.0,Culture=neutral,PublicKeyToken=c5687fc88969c44d" applicationName="MySqlSimpleMembershipTest" description="MySQLdefaultapplication" connectionStringName="MyConnection" userTableName="UserProfile" userIdColumn="UserId" userNameColumn="UserName" autoGenerateTables="True"/></providers></membership> In the previous configuration the mandatory properties are: connectionStringName, userTableName, userIdColumn, userNameColumn and autoGenerateTables. If the other properties are not provided a default value is set to it but if the mandatory properties are not set a ProviderException will be thrown. The valid properties for the MySqlSimpleMembership are the same used for MySqlMembership plus the mandatory fields. UserTableName: Name of the table where will be stored the user, this table is independent from the schema generated by the provider and can be edited later by the user. UserId: name of the column that will store the id for the records in the userTableName. UserName : name of the column that will store the name/user for the records in the userTableName. The connectionStringName property must match a connection string defined in web.config file. Once the configuration is done in web.config, we need to be sure that our database context for the Users Table point to the right connection string. In our case we just need to update the class UsersContext in the file AcountModel.cs in the Models folder. The file also contains the UserProfile class which match the configuration for our UserTable. Other class that needs to be updated is the SimpleMembershipInitializer in the file InitializeSimpleMembershipAttribute.cs in the Filters folder. In that class we'll see a call to the method “WebSecurity.InitializeDatabaseConnection”, in that call is where we need to update the parameters to match our configuration. If the database that you configure in your connection string doesn't exists, you need to create it empty. Now we're ready to run our web application, press F5 or the Run button in the tool bar. You'll see the following screen: If you go to your database used by the application you'll see some tables created, now we are using SimpleMembership. Now create a user, click on “Register” at the top-right in the web page. Type your user name and password, then click on “Register”. You'll be redirected to the home page and you'll see the name of your user at the top-right page. If you take a look on the tables just created in your database you will find the data about the user you just register. In our case the tables that contains the information are UserProfile and Webpages_Membership. Configuring OAuth Other option to access your website will be using OAuth, so you can validate an user using an external account like Facebook, Twitter, Google, etc. In this post we'll enable the authentication for Google account in our application. Go to the class AuthConfig.cs in the folder App_Start. In the method “RegisterAuth” uncomment the last line where is the call to the method “OauthWebSecurity.RegisterGoogleClient”. Run the application. Once the application is running click on “Login”. You will see at the right side the option to login using a Google account, click on “Google”. You will be asked for Google credentials. If your login is successful you'll see a message asking for your approval to give permission to your site to access your information. Click on “Accept”. Now a page to register your user will be shown, click on “Register”. Now your new user is logged in in your application. You can take a look of the user information created in the tables UserProfile and Webpages_OauthMembership. If you want to use another external option to authenticate users you must enable the client in the same class where we enable the Google authentication, but for others providers is mandatory to register your Application in their site. Once you have register your application they will give you a token/key and the id for your application, that information you're going to use it to register the client. Thanks for reading.

Search Results

Search found 19212 results on 769 pages for 'side projects'.

Page 733/769 | < Previous Page | 729 730 731 732 733 734 735 736 737 738 739 740 | Next Page >

- by Maria Zakourdaev

- by mortezam

- by PSteele

- by Leonid Ganeline

- by Richard Bingham

- by Michael Snow

- by Tom

- by LeonShaner

- by Ratman21

- by nikolaosk

- by SOfan

- by George Clingerman

- by ToStringTheory

- by Mike Dietrich

- by mbcrump

- by JoshReuben

- by kellsey.ruppel

- by TStewartDev

- by Tarun Arora

- by DigiMortal

- by Your DisplayName here!

- by Michael Stephenson

- by Francisco Tirado

< Previous Page | 729 730 731 732 733 734 735 736 737 738 739 740 | Next Page >