Search Results

Search found 20484 results on 820 pages for 'small projects'.

Page 738/820 | < Previous Page | 734 735 736 737 738 739 740 741 742 743 744 745  | Next Page >

• Building a database installer with WiX, datadude and Visual Studio 2010

  - by jamiet

  Today I have been using Windows Installer XML (WiX) to build an installer (.msi file) that would install a SQL Server database on a server of my choosing; the source code for that database lives in datadude (a tool which you may know by one of quite a few other names). The basis for this work was a most excellent blog post by Duke Kamstra entitled Implementing a WIX installer that calls the GDR version of VSDBCMD.EXE which coves the delicate intricacies of doing this – particularly how to call Vsdbcmd.exe in a CustomAction. Unfortunately there are a couple of things wrong with Duke’s post: Searching for “datadude wix” didn’t turn it up in the first page of search results and hence it took me a long time to find it. And I knew that it existed. If someone else were after a post on using WiX with datadude its likely that they would never have come across Duke’s post and that would be a great shame because its the definitive post on the matter. It was written in October 2009 and had not been updated for Visual Studio 2010. Well, this blog post is an attempt to solve those problems. Hopefully I’ve solved the first one just by following a few of my blogging SEO tips while writing this blog post, in the rest of it I will explain how I took Duke’s code and updated it to work in Visual Studio 2010. If you need to build a database installer using WiX, datadude and Visual Studio 2010 then you still need to follow Duke’s blog post so go and do that now. Below are the amendments that I made that enabled the project to get built in Visual Studio 2010: In VS2010 datadude’s output files have changed from being called Database.<suffix> to <ProjectName>_Database.<suffix>. Duke’s code was referencing the old file name formats. Duke used $(var.SolutionDir) and relative paths to point to datadude artefacts I have replaced these with Votive Project References http://wix.sourceforge.net/manual-wix3/votive_project_references.htm I commented out all references to MicrosoftSqlTypesDbschema in DatabaseArtifacts.wxi. I don't think this is produced in VS2010 (I may be wrong about that but it wasn't in the output from my project) Similarly I commented out component MicrosoftSqlTypesDbschema in VsdbcmdArtifacts.wxi. It wasn't where Duke's code said it should have been so am assuming/hoping it isn't needed. Duke's ?define block to work out appropriate SrcArchPath actually wasn't working for me (i.e. <?if $(var.Platform)=x64 ?> was evaluating to false)  so I just took out the conditional stuff and declared the path explicitly to the “Program Files (x86)” path. The old code is still there though if you need to put it back. None of the <RegistrySearch> stuff is needed for VS2010 - so I commented it all out! Changed to use /manifest option rather than /model option on vsdbcmd.exe command-line. Personal preference is all! Added a new component in order to bundle along the vsdbcmd.exe.config file Made the install of the Custom Action dependent on the relevant feature being selected for install. This one is actually really important – deselecting the database feature for installation does not, by default, stop the CustomAction from executing and so would cause an error - so that scenario needs to be catered for I have made my amended solution available for download at: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.zip It contains two projects: the WiX project and the datadude project that is the source to be deployed (for demo purposes it only contains one table). I have also made the .msi available although in order that it gets through file blockers I changed the name from InstallMyDatabase.msi to InstallMyDatabase.ms_ – simply rename the file back once you have downloaded it from: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.ms%5E_ .You can try it out for yourself – the only thing it does is dump the files into %Program Files%\MyDatabase and uses them to install a database onto a server of your choosing with a name of your choosing - no damaging side-affects. I will caveat this by saying “it works on my machine” and, not having access to a plethora of different machines, I haven’t tested it anywhere else. One potential issue that I know of is that Vsdbcmd.exe has a dependency on SQL Server CE although if you have SQL Server tools or Visual Studio installed you should be fine. Unfortunately its not possible to bundle along the SQL Server CE installer in the .msi because Windows will not allow you to call one installer from inside another – the recommended way to get around this problem is to build a bootstrapper to bundle the whole lot together but doing that is outside the scope of this blog post. If you discover any other issues then please let me know. Here are the screenshots from the installer: And once installed…. Hope this is useful! @jamiet 

  Read the article

• Developer Training – Various Options for Maximum Benefit – Part 4

  - by pinaldave

  Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 If you have been reading this series, by now you are aware of all the pros and cons that can come along with training.  We’ve asked and answered hard questions, and investigated them “whys” and “hows” of training.  Now it is time to talk about all the different kinds of training that are out there! On Job Training The most common type of training is on the job training.  Everyone receives this kind of education – even experts who come in to consult have to be taught where the printer, pens, and copy machines are.  If you are thinking about more concrete topics, though, on the job training can be some of the easiest to come across.  Picture this: someone in the company whom you really admire is hard at work on a project.  You come up to them and ask to help them out – if they are a busy developer, the odds are that they will say “yes, please!”   If you phrase your question as an offer of help, you can receive training without ever putting someone in the awkward position of acting as a mentor.  However, some people may want the task of being a mentor.  It can never hurt to ask.  Most people will be more than willing to pass their knowledge along. Extreme Programming If your company and coworkers are willing, you can even investigate Extreme Programming.  This is a type of programming that allows small teams to quickly develop code and products that are released with almost immediate user feedback.  You can find more information at http://www.extremeprogramming.org/.  If this is something your company could use, suggest it to your supervisor.  Even if they say no, it will make it clear that you are a go-getter who is interested in new and exciting projects.  If the answer is yes, then you have the opportunity to get some of the best on the job training around. In Person Training Click on Image to Enlarge When you say the word “training,” most people’s minds go back to the classroom, an image they are familiar with.  While training doesn’t always have to be in a traditional setting, because it is so familiar it can also be the most valuable type of training.  There are many ways to get training through a live instructor.  Some companies may be willing to send a representative to you, where employees will get training, sometimes food and coffee, and a live instructor who can answer questions immediately.  Sometimes these trainers are also able to do consultations at the same time, which can invaluable to a company.  If you are the one to asks your supervisor for a training session that can also be turned into a consultation, you may stick in their minds as an incredibly dedicated employee.  If you can’t find a representative, local colleges can also be a good resource for free or cheap classes – or they may have representatives coming who are willing to take on a few more students. Benefits of On Demand Developer Training Of course, you can often get the best of all these types of training with online or On Demand training.  You can get the benefit of a live instructor who is willing to answer questions (although in this case, usually through e-mail or other online venues), there are often real-world examples to follow along – like on the job training – and best of all you can learn whenever you have the time or need.  Did a problem with your server come up at midnight when all your supervisors are safe at home and probably in bed?  No problem!  On Demand training is especially useful if you need to slow down, pause, or rewind a training session.  Not even a real-life instructor can do that! When I was writing this blog post, I felt that each of the subject, which I have covered can be blog posts of itself. However, I wanted to keep the the blog post concise and so touch based on three major training aspects 1) On Job Training 2) In Person Training and 3) Online training. Here is the question for you – is there any other kind of training methods available, which are effective and one should consider it? If yes, what are those, I may write a follow up blog post on the same subject next week. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Fix Windows Computer Problems with Microsoft Fix it Center

  - by Matthew Guay

  Fixing computer problems can often be difficult, but Microsoft is aiming to make it as simple as a couple clicks with.  Here’s how you can easily fix computer problems with Microsoft’s new Fix it Center Beta. Last year Microsoft began offering small Fix it scripts that you could download and run to help solve common computer problems automatically.  These were added to some of the most visited Windows help pages, and helped fix problems with things such as printing errors and Aero glass support.  Now, the Fix it scripts have been bundled together with the Fix it Center, making fixing your computer even easier.  This free tool works great on all editions of Windows XP, Vista, and Windows 7. Note: The Fix it Center is currently in beta, so only run if you are comfortable running beta software. Getting Started Download the Fix it Center installer (link below), and install as normal. The installer will download the remaining components, and then finish the installation. In Windows XP, if you have not yet installed .NET 2.0, you may see the following prompt.  Click Yes to go to the download site, and once you’ve installed .NET 2.0, run the Fix it Center setup again. Also, the Fix it Center uses PowerShell to automate its fixes, but if it is not installed yet the installer will automatically download and install it. Find Fixes for Your PC Once Fix it Center is installed, you can personalize it for your computer.  Select Now, and the click Next. It will scan your computer for problems with known solutions, and will offer to go ahead and install these troubleshooters.  If you choose to not install them, you can always download them from within the Fix it Center at a later time. While those troubleshooters are downloading, you can create a Fix it account.  This will give you additional help and support, and let you review Fix it solutions for all your computers from an online dashboard.  You need a Windows Live ID to create an account. Also, choose whether or not to send information to Microsoft about your hardware and software problems. Get Problems Fixed Now that the Fix it Center is installed and has identified issues on your computer, it’s time to get the problems fixed.  Here’s the default front screen in Windows 7, showing all of the available fixes. And here’s the Fix it Center running in Windows XP. Select one of the Troubleshooters to see more information about it, and click Run to start it. You can choose to either detect problems and have them fixed automatically, or you can choose for the Fix it Center to show you the solutions and let you choose whether to apply them or not.  The defaults usually work good, and only take a couple minutes to apply the fixes, but you can select your own fixes if you’d rather be in control. It will scan your computer for known problems in this area, and then will show you the results.  Here, Fix it determined that startup programs may be causing performance issues.  Select Start System Configuration, and uncheck any of the programs you do not usually use. Once you’ve run a troubleshooter, you can see the issues it checked for and any problems it discovered. If you created the online account, you can also choose to view the details online.  This will show all of your computers with Fix it Center and the fixes you’ve run on them.   Conclusion Whether you’re a power user or new to computers, sometimes it’s best to just get your problems fixed and go on with life instead of digging through the registry, forums, and hacking your way to a solution.  Remember the service is still in beta and may not work perfectly or solve your issues every time. But it’s something cool and worth a look. Links Download Microsoft Fix it Center Beta Fix additional problems with Microsoft’s Fix it Center Online Similar Articles Productive Geek Tips Disable Windows Mobility Center in Windows 7 or VistaMake Outlook Faster by Disabling Unnecessary Add-InsUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Disable Security Center Popup Notifications in Windows VistaHow To Manage Action Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Add Background Images and Themes to Windows 7 Media Center

  - by DigitalGeekery

  Are you tired of the same Windows Media Center look and feel? Today we’ll show you how change the background and apply themes to WMC. Changing the Basic Color Scheme in WMC There are a couple of very basic color scheme options built in to Windows 7 Media Center. From the WMC Start Menu, select Settings on the Tasks strip and then select General. On the General settings screen select Visual and Sound Effects.   Under Color scheme you’ll find options for Windows Media Center standard, High contrast white, and High contrast black. Simply select a color scheme and click Save before exiting.   If you have used Media Center before you are familiar with the standard blue default theme. There is also the high contrast white. And, the high contrast black. Changing the Background Image with Media Center Studio Themes and custom backgrounds need to be added with the third-party software, Media Center Studio. You can find the download link at the end of this article. You can use your own high resolution photo, or download one from the Internet. For best results, you’ll want to find an image that meets or exceeds the resolution of your monitor. Also, using a darker colored background image is ideal as it should contrast better with the lighter colored text of the start menu. Once you’ve downloaded and installed Media Center Studio (link below), open the application select the Home tab on the ribbon and make sure you are on the Themes tab below. Click New. Select Biography from the left pane and type in a name for your new theme.   Next, click on the triangle next to Images to expand the list below. You’ll want to browse to Images > Common > Background. You should see a list of PNG image files located below Background. We will want to swap out the COMMON.ANIMATED.BACKGROUND.PNG and the COMMON.BACKGROUND.PNG images. Select COMMON.ANIMATED.BACKGROUND.PNG and click on the Browse button on the right.   Browse for your photo and click Open. Your selected image will appear on the left pane. Now, do the same for the COMMON.BACKGROUND.PNG. When finished, select the Home tab on the ribbon at the top and click Save.   Now switch to the Themes tab on the ribbon and the Themes tab below. (There are two Themes tabs which can be a bit confusing). Select your theme on the right pane and click Apply. Note: You won’t see the image backgrounds displayed. Your theme will be applied to Media Center. Close out of Media Center Studio and open Windows Media Center to check out your new background.   You can load multiple backgrounds images and switch them periodically as your mood changes. You might like to find a nice background featuring your favorite movie or TV show.   Perhaps you can even find a background of your favorite sports team.   Installing Themes with Media Center Studio Theme7MC has made available a small group of Media Center Studio Theme packs that are simple to download and install. You can find the download link below. Note: Before installing a theme, turn off any extenders and close Windows Media Center. Download any (or all) of the Theme7MC theme packages to your Media Center PC. Open Media Center Studio, select the Themes tab (the one at the top) and click Import Theme.   Browse for the theme you wish to import and click Open. Select your theme from the themes pane and click Apply. Media Center Studio will proceed to apply your theme. You should then see your new theme appear under Current theme on the left theme pane. Close out of Media Center Studio. Open Media Center and enjoy your new theme. Conclusion Media Center Studio runs on Windows 7 or Vista and gives users a solution for personalizing their Media Center backgrounds. It is a Beta application, however, so it still has a few bugs. Currently, there are only a handful of themes available at Themes7MC, but what they have is pretty slick. If you’d like to further customize the look of Media Center, check out our previous article on how to customize the Media Center start menu with Media Center Studio. Downloads Media Center Studio Theme7MC Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)How To Rip a Music CD in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3

  Read the article

• Session Report: What’s New in JSF: A Complete Tour of JSF 2.2

  - by Janice J. Heiss

  On Wednesday, Ed Burns, Consulting Staff Member at Oracle, presented a session, CON3870 -- “What’s New in JSF: A Complete Tour of JSF 2.2,” in which he provided an update on recent developments in JavaServer Faces 2.2. He began by emphasizing that, “JavaServer Faces 2.2 continues the evolution of the Java EE standard user interface technology. Like previous releases, this iteration is very community-driven and transparent.” He pointed out that since JSF was introduced at the 2001 JavaOne Keynote, it has had a long and successful run and has found a home in applications where the UI logic resides entirely on the server where the model and UI logic is. In such cases, the browser performs fairly simple functions. However, developers can take advantage of the power of browsers, something that Project Avatar is focused on by letting developers author their applications so the UI logic is running on the client and communicating to the back end via RESTful web services. “Most importantly,” remarked Burns, “JSF 2.2 offers a really good migration path because even in the scope of one application you could have an app written with JSF that has its UI logic on the server and, on a gradual basis, you could migrate parts of the app over to use client-side technologies. This can be done at any level of granularity – per page or per collection of pages. It all depends on what you want to do.” His presentation, which focused on the basic new features of JSF 2.2, began by restating the scope of JSF and encouraged attendees to check out Roger Kitain’s session: CON5133 “Techniques for Responsive Real-Time Web UIs.” Burns explained that JSF has endured because, “We still need web apps that are maintainable, localizable, quick to build, accessible, secure, look great and are fun to use.” It is used on every continent – the curious can go here to check out where its unofficial usage is tracked. He emphasized the significance of the UI logic being substantially on the server. This: Separates Component Semantics from Rendering, Allows components to “own” their little patch of the UI -- encode/decode, And offers a well-defined lifecycle: Inversion of Control. Burns reminded attendees that JSR-344, the spec for JSF 2.2, is now on Java Community Process 2.8, a revised version of the JCP that allows for more openness and transparency. He then offered some tools for community access to JSF 2.2:    * Public java.net projects spec http://jsf-spec.java.net/ impl http://jsf.java.net/ Open Source: GPL+Classpath Exception    * Mailing Lists [email protected]                                Public readable archive, JSPA signed member read/write [email protected]                                     Public readable archive, any java.net member read/write                         All mail sent to jsr344-experts is sent to users. * Issue Tracker spec http://jsf-spec.java.net/issues/ impl http://jsf.java.net/issues/ JSF 2.2, which is JSR 344, has a Public Review Draft planned by December 2012 with no need for a Renewal Ballot. The Early Draft Review of JSR 344 was published on December 8, 2011. Interested developers are encouraged to offer their input. Six Big Ticket Features of JSF 2.2 Burns summarized the six big ticket features of JSF 2.2:* HTML5 Friendly Markup Support Pass through attributes and elements * Faces Flows* Cross Site Request Forgery Protection* Loading Facelets via ResourceHandler* File Upload Component* Multi-Templating He explained that he called it “HTML 5 friendly” because there is really nothing HTML 5 specific about it -- it could be 4. But it enables developers to use new elements that are present in HTML5 without having a JSF component library that is written to take advantage of those specifically. It gives the page author the ability to use plain HTML5 to write their page, but to still take advantage of the server-side available in JSF. He presented a demo showing JSF 2.2’s ability to leverage the expressiveness of HTML5. Burns then explained the significance of face flows, which offer function points and quantify how much work has taken place, something of great value to JSF users. He went on to talk about JSF 2.2.’s cross-site request forgery protection (CSRF) and offered details about how it protects applications against attack. Then he talked about JSF 2.2’s File Upload Component and explained that the final specification will have Ajax and non-Ajax support. The current milestone has non-Ajax support implemented. He then went on to explain its capacity to add facelets through ResourceHandler. Previously, JSF 2.0 added Facelets and ResourceHandler as disparate units; now in JSF 2.2 the two concepts are unified. Finally, he explained the concept of multi-templating in JSF 2.2 and went on to discuss more medium-level features of the release. For an easy, low maintenance way of staying in touch with JSF developments go to JSF’s Twitter page where every month or so, important updates are offered.

  Read the article

• Mobile HCM: It’s not the future, it is right now

  - by Natalia Rachelson

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Steve Boese, Director Product Strategy, Oracle I’ll bet you reached for your iPhone or Android or BlackBerry and took a quick look at email or Facebook or last night’s text messages before you even got out of bed this morning. Come on, admit it, it’s ok, you are among friends here. See, feel better now? But seriously, the incredible growth and near-ubiquity of increasingly powerful, capable, and for many of us, essential in our daily lives mobile devices has profoundly changed the way we communicate, consume information, socialize, and more and more, conduct business and get our work done. And if you doubt that profound change has happened, just think for a moment about the last time you misplaced your iPhone.  The shivers, the cold sweats, the panic... We have all been there. And indeed your personal experiences with mobile technology echoes throughout the world - here are a few data points to consider: Market research firm IDC estimates 1.8 billion mobile phones will be shipped in 2012. A recent Pew study reports 46% of Americans own a smartphone of some kind. And finally in the USA, ownership of tablets like the iPad has doubled from 10% to 19% in the last year. So truly for the Human Resources leader, the question is no longer, ‘Should HR explore ways to exploit mobile devices and their always-on nature to better support and empower the modern workforce?’, but rather ‘How can HR best take advantage of smartphone and tablet capability to provide information, enable transactions, and enhance decision making?’. Because even though moving HCM applications to mobile devices seems inherently logical given today’s fast-moving and mobile workforces, and its promise to deliver incredible value to the organization, HR leaders also have to consider many factors before devising their Mobile HCM strategy and embarking on mobile HR technology projects. Here are just some of the important considerations for HR leaders as you build your strategies and evaluate mobile HCM solutions: Does your organization provide mobile devices to the workforce today, and if so, will the current set of deployed devices have the necessary capability and ecosystems to support your mobile HCM initiatives? Will you allow workers to use or bring their own mobile devices, (commonly abbreviated as ‘BYOD’), and if so are your IT and Security organizations in agreement and capable of supporting that strategy? Do you know which workers need access to mobile HCM applications? Often mobile HCM capability flows down in an organization, with executives and other ‘road-warrior’ types having the most immediate needs, followed by field sales staff, project managers, and even potential job candidates. But just as an organization will have to spend time understanding ‘who’ should have access to mobile HCM technology, the ‘what’ of the way the solutions should be deployed to these groups will also vary. What works and makes sense for the executive, (company-wide dashboards and analytics on an iPad), might not be as relevant for a retail store manager, (employee schedules, location-level sales and inventory data, transaction approvals, etc.). With Oracle Fusion HCM, we are taking an approach to mobile HR that encompasses not just the mobile solution needs for the various types of worker, but also incorporates the fundamental attributes of great mobile applications - the ability to support end-to-end transactions, apps that respond with lightning-fast speed, with functions that are embedded in a worker’s daily activities, and features that can be mashed-up easily with other business areas like Finance and CRM. Finally, and perhaps most importantly for the Oracle Fusion HCM team, delivering mobile experiences that truly enhance, enable, and empower the mobile workforce, and deliver on the design mantras of the best-in-class consumer applications, continues to shape and drive design decisions. Mobile is no longer the future, it is right now, and the cutting-edge HR leader of today will need to consider how mobile fits her HCM technology strategy from here on out. You can learn more about our ideas and plans for Oracle Fusion HCM mobile solutions at https://fusiontap.oracle.com/.

  Read the article

• Fixing up Visual Studio&rsquo;s gitignore , using IFix

  - by terje

  Originally posted on: http://geekswithblogs.net/terje/archive/2014/06/13/fixing-up-visual-studiorsquos-gitignore--using-ifix.aspxDownload tool Is there anything wrong with the built-in Visual Studio gitignore ???? Yes, there is !  First, some background: When you set up a git repo, it should be small and not contain anything not really needed.  One thing you should not have in your git repo is binary files. These binary files may come from two sources, one is the output files, in the bin and obj folders.  If you have a  gitignore file present, which you should always have (!!), these folders are excluded by the standard included file (the one included when you choose Team Explorer/Settings/GitIgnore – Add.) The other source are the packages folder coming from your NuGet setup.  You do use NuGet, right ?  Of course you do !  But, that gitignore file doesn’t have any exclude clause for those folders.  You have to add that manually.  (It will very probably be included in some upcoming update or release).  This is one thing that is missing from the built-in gitignore. To add those few lines is a no-brainer, you just include this: # NuGet Packages packages/* *.nupkg # Enable "build/" folder in the NuGet Packages folder since # NuGet packages use it for MSBuild targets. # This line needs to be after the ignore of the build folder # (and the packages folder if the line above has been uncommented) !packages/build/ Now, if you are like me, and you probably are, you add git repo’s faster than you can code, and you end up with a bunch of repo’s, and then start to wonder: Did I fix up those gitignore files, or did I forget it? The next thing you learn, for example by reading this blog post, is that the “standard” latest Visual Studio gitignore file exist at https://github.com/github/gitignore, and you locate it under the file name VisualStudio.gitignore.  Here you will find all the new stuff, for example, the exclusion of the roslyn ide folders was commited on May 24th.  So, you think, all is well, Visual Studio will use this file …..     I am very sorry, it won’t. Visual Studio comes with a gitignore file that is baked into the release, and that is by this time “very old”.  The one at github is the latest.  The included gitignore miss the exclusion of the nuget packages folder, it also miss a lot of new stuff, like the Roslyn stuff. So, how do you fix this ?  … note .. while we wait for the next version… You can manually update it for every single repo you create, which works, but it does get boring after a few times, doesn’t it ? IFix Enter IFix ,  install it from here. IFix is a command line utility (and the installer adds it to the system path, you might need to reboot), and one of the commands is gitignore If you run it from a directory, it will check and optionally fix all gitignores in all git repo’s in that folder or below.  So, start up by running it from your C:/<user>/source/repos folder. To run it in check mode – which will not change anything, just do a check: IFix  gitignore --check What it will do is to check if the gitignore file is present, and if it is, check if the packages folder has been excluded.  If you want to see those that are ok, add the --verbose command too.  The result may look like this: Fixing missing packages Let us fix a single repo by adding the missing packages structure,  using IFix --fix We first check, then fix, then check again to verify that the gitignore is correct, and that the “packages/” part has been added. If we open up the .gitignore, we see that the block shown below has been added to the end of the .gitignore file.   Comparing and fixing with latest standard Visual Studio gitignore (from github) Now, this tells you if you miss the nuget packages folder, but what about the latest gitignore from github ? You can check for this too, just add the option –merge (why this is named so will be clear later down) So, IFix gitignore --check –merge The result may come out like this  (sorry no colors, not got that far yet here): As you can see, one repo has the latest gitignore (test1), the others are missing either 57 or 150 lines.  IFix has three ways to fix this: --add --merge --replace The options work as follows: Add:  Used to add standard gitignore in the cases where a .gitignore file is missing, and only that, that means it won’t touch other existing gitignores. Merge: Used to merge in the missing lines from the standard into the gitignore file.  If gitignore file is missing, the whole standard will be added. Replace: Used to force a complete replacement of the existing gitignore with the standard one. The Add and Replace options can be used without Fix, which means they will actually do the action. If you combine with --check it will otherwise not touch any files, just do a verification.  So a Merge Check will  tell you if there is any difference between the local gitignore and the standard gitignore, a Compare in effect. When you do a Fix Merge it will combine the local gitignore with the standard, and add what is missing to the end of the local gitignore. It may mean some things may be doubled up if they are spelled a bit differently.  You might also see some extra comments added, but they do no harm. Init new repo with standard gitignore One cool thing is that with a new repo, or a repo that is missing its gitignore, you can grab the latest standard just by using either the Add or the Replace command, both will in effect do the same in this case. So, IFix gitignore --add will add it in, as in the complete example below, where we set up a new git repo and add in the latest standard gitignore: Notes The project is open sourced at github, and you can also report issues there.

  Read the article

• “Being Agile” Means No Documentation, Right?

  - by jesschadwick

  Ask most software professionals what Agile is and they’ll probably start talking about flexibility and delivering what the customer wants.  Some may even mention the word “iterations”.  But inevitably, they’ll say at some point that it means less or even no documentation.  After all, doesn’t creating, updating, and circulating painstakingly comprehensive documentation that everyone and their mother have officially signed off on go against the very core of Agile?  Of course it does!  But really, they’re missing the point! Read The Agile Manifesto. (No, seriously - read it now. It’s short. I’ll wait.)  It’s essentially a list of values.  More specifically, it’s a right-side/left-side weighted list of values:  “Value this over that”. Many people seem to get the impression that this is really a “good vs. bad” list and that those values on the right side are evil and should essentially be tossed on the floor.  This leads to the conclusion that in order to be Agile we must throw away our fancy expensive tools, document as little as possible, and scoff at the idea of a project plan.  This conclusion is quite convenient because it essentially means “less work, more productivity!” (particularly in regards to the documentation and project planning).  I couldn’t disagree with this conclusion more. My interpretation of the Manifesto targets “over” as the operative word.  It’s not just a list of right vs. wrong or good vs. bad.  It’s a list of priorities.  In other words, none of the concepts on the list should be removed from your development lifecycle – they are all important… just not equally important.  This is not a unique interpretation, in fact it says so right at the end of the manifesto! So, the next time your team sits down to tackle that big new project, don’t make the first order of business to outlaw all meetings, documentation, and project plans.  Instead, collaborate with both your team and the business members involved (you do have business members sitting in the room, directly involved in the project planning, right?) and determine the bare minimum that will allow all of you to work and communicate in the best way possible.  This often means that you can pick and choose which parts of the Agile methodologies and process work for your particular project and end up with an amalgamation of Waterfall, Agile, XP, SCRUM and whatever other methodologies the members of your team have been exposed to (my favorite is “SCRUMerfall”). The biggest implication of this is that there is no one way to implement Agile.  There is no checklist with which you can tick off boxes and confidently conclude that, “Yep, we’re Agile™!”  In fact, depending on your business and the members of your team, moving to Agile full-bore may actually be ill-advised.  Such a drastic change just ends up taking everyone out of their comfort zone which they inevitably fall back into by the end of the project.  This often results in frustration to the point that Agile is abandoned altogether because “we just need to ship something!”  Needless to say, this is far more devastating to a project. Instead, I offer this approach: keep it simple and take it slow.  If your business members or customers are only involved at the beginning phases and nowhere to be seen until the project is delivered, invite them to your daily meetings; encourage them to keep up to speed on what’s going on on a daily basis and provide feedback.  If your current process is heavy on the documentation, try to reduce it as opposed to eliminating it outright.  If you need a “TPS Change Request” signed in triplicate with a 5-day “cooling off period” before a change is implemented, try a simple bug tracking system!  Tighten the feedback loop! Finally, at the end of every “iteration” (whatever that means to you, as long as it’s relatively frequent), take as much time as you can spare (even if it’s an hour or so) and perform some kind of retrospective.  Learn from your mistakes.  Figure out what’s working for you and what’s not, then fix it.  Before you know it you’ve got a handful of iterations and/or projects under your belt and you sit down with your team to realize that, “Hey, this is working - we’re pretty Agile!”  After all, Agile is a Zen journey.  It’s a destination that you aim for, not force, and even if you never reach true “enlightenment” that doesn’t mean your team can’t be exponentially better off from merely taking the journey.

  Read the article

• Convert Excel File 'xls' to CSV, CAUTION: Bumps Ahead

  - by faizanahmad

  The task was to provide users with an interface where they can upload the 'csv' files, these files were to be processed and loaded to Database by a Console application. The code in Console application could not handle the 'xls' files so we thought, OK, lets convert 'xls' to 'csv' in the code, Seemed like fun. The idea was to convert it right after uploading within 'csv' file. As Microsoft does not recommend using the  Excel objects in ASP.NET, we decided to use the Jet engine to open xls. (Ace driver is used for xlsx) The code was pretty straight, can be found on following links: http://www.c-sharpcorner.com/uploadfile/yuanwang200409/102242008174401pm/1.aspx http://www.devasp.net/net/articles/display/141.html FIRST BUMP 'OleDbException (0x80004005): Unspecified error' ( Impersonation ): The ablove code ran fine in my test web site and test console application, but it gave an 'OleDbException (0x80004005): Unspecified error' in main web site, turns out imperonation was set to True and as soon as I changed it to False, it did work. on My XP box, web site was running under user                   'ASPNET'  with imperosnation set to FALSE                   'IUSR_*' i.e IIS guest user with impersonation set to TRUE The weired part was that both users had same rights on the folders I was saving files to and on Excel app in DCOM Config.  We decided to give it a try on Windows Server 2003 with web site set to windows authentication ( impersonation = true ) and yes it did work. SECOND BUMP 'External table not in correct format': I got this error with some files and it appeared that the file from client has some metadata issues  ( when I opened the file in Excel and try to save it ,excel  would give me this error saying File can not be saved in current format ) and the error was caused by that. Some people were able to reslove the error by using "Extended Properties=HTML Import;" in connection string. But it did not work for me. We decided to detour from here and use Excel object :( as we had no control on client setting the meta deta of Excel files. Before third bump there were a ouple of small thingies like 'Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80070005' Fix can be found at http://blog.crowe.co.nz/archive/2006/03/02/589.aspx THIRD BUMP ( Could not get rid of the EXCEL process  ):  I has all the code in place to 'Quiet' the excel, but, it just did not work. work around was done to Kill the process as we knew no other application on server was using EXCEL.  The normal steps to quite the excel application worked just fine in console application though.   FOURTH BUMP: Code worked with one file 1 on my machine and with the other file 2 code will break. and the same code will work perfectly fine with file 2 on some other machine . We moved it to QA  ( Windows Server 2003 )and worked with every file just perfect. But , then there was another problem: one user can upload it and second cant, permissions on folder and DCOM Conifg checked. Another Detour: Uplooad the xls as it is and convert in Console application.   Lesson Learnt:  If its 'xlsx' use 'ACE Driver' or read xml within excel as recommneded by MS. If xls and you know its always going to be properly formatted  'jet Engine'  Code: Imports Microsoft.Office.Interop Private Function ConvertFile(ByVal SourceFolder As String, ByVal FileName As String, ByVal FileExtension As String)As Boolean     Dim appExcel As New Excel.Application     Dim workBooks As Excel.Workbooks = appExcel.Workbooks     Dim objWorkbook As Excel.Workbook      Try                   objWorkbook = workBooks.Open(CompleteFilePath )                            objWorkbook.SaveAs(Filename:=CObj(SourceFolder & FileName & ".csv"), FileFormat:=Excel.XlFileFormat.xlCSV)       Catch ex As Exception         GenerateAlert(ex.Message().Replace("'", "") & " Error Converting File to CSV.")         LogError(ex )         Return False      Finally                      If Not(objWorkbook is Nothing) then               objWorkbook.Close(SaveChanges:=CObj(False))           End If           ReleaseObj(objWorkbook)                                      ReleaseObj(workBooks)           appExcel.Quit()           ReleaseObj(appExcel)                                 Dim proc As System.Diagnostics.Process           For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")               proc.Kill()           Next         DeleteSourceFile(SourceFolder & FileName & FileExtension)     End Try  Return True  End Function   Private Sub ReleaseObj(ByVal o As Object)     Try      System.Runtime.InteropServices.Marshal.ReleaseComObject(o)   Catch ex As Exception           LogError(ex )   Finally      o = Nothing    End Try End Sub     Protected Sub DeleteSourceFile(Byval CompleteFilePath As string)         Try             Dim MyFile As FileInfo = New FileInfo(CompleteFilePath)             If  MyFile.Exists Then                 File.Delete(CompleteFilePath)             Else              Throw New FileNotFoundException()             End If         Catch ex As Exception             GenerateAlert( " Source File could not be deleted.")              LogError(ex)         End Try     End Sub  The code to kill the process ( Avoid it if you can ): Dim proc As System.Diagnostics.Process For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")     proc.Kill() Next

  Read the article

• Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

  - by mbridge

  Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

  Read the article

• Searching for tasks with code – Executables and Event Handlers

  Searching packages or just enumerating through all tasks is not quite as straightforward as it may first appear, mainly because of the way you can nest tasks within other containers. You can see this illustrated in the sample package below where I have used several sequence containers and loops. To complicate this further all containers types, including packages and tasks, can have event handlers which can then support the full range of nested containers again. Towards the lower right, the task called SQL In FEL also has an event handler not shown, within which is another Execute SQL Task, so that makes a total of 6 Execute SQL Tasks 6 tasks spread across the package. In my previous post about such as adding a property expressionI kept it simple and just looked at tasks at the package level, but what if you wanted to find any or all tasks in a package? For this post I've written a console program that will search a package looking at all tasks no matter how deeply nested, and check to see if the name starts with "SQL". When it finds a matching task it writes out the hierarchy by name for that task, starting with the package and working down to the task itself. The output for our sample package is shown below, note it has found all 6 tasks, including the one on the OnPreExecute event of the SQL In FEL task TaskSearch v1.0.0.0 (1.0.0.0) Copyright (C) 2009 Konesans Ltd Processing File - C:\Projects\Alpha\Packages\MyPackage.dtsx MyPackage\FOR Counter Loop\SQL In Counter Loop MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL\OnPreExecute\SQL On Pre Execute for FEL SQL Task MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SEQ Nested Lvl 2\SQL In Nested Lvl 2 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #1 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #2 6 matching tasks found in package. The full project and code is available for download below, but first we can walk through the project to highlight the most important sections of code. This code has been abbreviated for this description, but is complete in the download. First of all we load the package, and then start by looking at the Executables for the package. // Load the package file Application application = new Application(); using (Package package = application.LoadPackage(filename, null)) { int matchCount = 0; // Look in the package's executables ProcessExecutables(package.Executables, ref matchCount); ... // // ... // Write out final count Console.WriteLine("{0} matching tasks found in package.", matchCount); } The ProcessExecutables method is a key method, as an executable could be described as the the highest level of a working functionality or container. There are several of types of executables, such as tasks, or sequence containers and loops. To know what to do next we need to work out what type of executable we are dealing with as the abbreviated version of method shows below. private static void ProcessExecutables(Executables executables, ref int matchCount) { foreach (Executable executable in executables) { TaskHost taskHost = executable as TaskHost; if (taskHost != null) { ProcessTaskHost(taskHost, ref matchCount); ProcessEventHandlers(taskHost.EventHandlers, ref matchCount); continue; } ... // // ... ForEachLoop forEachLoop = executable as ForEachLoop; if (forEachLoop != null) { ProcessExecutables(forEachLoop.Executables, ref matchCount); ProcessEventHandlers(forEachLoop.EventHandlers, ref matchCount); continue; } } } As you can see if the executable we find is a task we then call out to our ProcessTaskHost method. As with all of our executables a task can have event handlers which themselves contain more executables such as task and loops, so we also make a call out our ProcessEventHandlers method. The other types of executables such as loops can also have event handlers as well as executables. As shown with the example for the ForEachLoop we call the same ProcessExecutables and ProcessEventHandlers methods again to drill down into the hierarchy of objects that the package may contain. This code needs to explicitly check for each type of executable (TaskHost, Sequence, ForLoop and ForEachLoop) because whilst they all have an Executables property this is not from a common base class or interface. This example was just a simple find a task by its name, so ProcessTaskHost really just does that. We also get the hierarchy of objects so we can write out for information, obviously you can adapt this method to do something more interesting such as adding a property expression. private static void ProcessTaskHost(TaskHost taskHost, ref int matchCount) { if (taskHost == null) { return; } // Check if the task matches our match name if (taskHost.Name.StartsWith(TaskNameFilter, StringComparison.OrdinalIgnoreCase)) { // Build up the full object hierarchy of the task // so we can write it out for information StringBuilder path = new StringBuilder(); DtsContainer container = taskHost; while (container != null) { path.Insert(0, container.Name); container = container.Parent; if (container != null) { path.Insert(0, "\\"); } } // Write the task path // e.g. Package\Container\Event\Task Console.WriteLine(path); Console.WriteLine(); // Increment match counter for info matchCount++; } } Just for completeness, the other processing method we covered above is for event handlers, but really that just calls back to the executables. This same method is called in our main package method, but it was omitted for brevity here. private static void ProcessEventHandlers(DtsEventHandlers eventHandlers, ref int matchCount) { foreach (DtsEventHandler eventHandler in eventHandlers) { ProcessExecutables(eventHandler.Executables, ref matchCount); } } As hopefully the code demonstrates, executables (Microsoft.SqlServer.Dts.Runtime.Executable) are the workers, but within them you can nest more executables (except for task tasks).Executables themselves can have event handlers which can in turn hold more executables. I have tried to illustrate this highlight the relationships in the following diagram. Download Sample code project TaskSearch.zip (11KB)

  Read the article

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• SmtpClient and Locked File Attachments

  - by Rick Strahl

  Got a note a couple of days ago from a client using one of my generic routines that wraps SmtpClient. Apparently whenever a file has been attached to a message and emailed with SmtpClient the file remains locked after the message has been sent. Oddly this particular issue hasn’t cropped up before for me although these routines are in use in a number of applications I’ve built. The wrapper I use was built mainly to backfit an old pre-.NET 2.0 email client I built using Sockets to avoid the CDO nightmares of the .NET 1.x mail client. The current class retained the same class interface but now internally uses SmtpClient which holds a flat property interface that makes it less verbose to send off email messages. File attachments in this interface are handled by providing a comma delimited list for files in an Attachments string property which is then collected along with the other flat property settings and eventually passed on to SmtpClient in the form of a MailMessage structure. The jist of the code is something like this: /// <summary> /// Fully self contained mail sending method. Sends an email message by connecting /// and disconnecting from the email server. /// </summary> /// <returns>true or false</returns> public bool SendMail() { if (!this.Connect()) return false; try { // Create and configure the message MailMessage msg = this.GetMessage(); smtp.Send(msg); this.OnSendComplete(this); } catch (Exception ex) { string msg = ex.Message; if (ex.InnerException != null) msg = ex.InnerException.Message; this.SetError(msg); this.OnSendError(this); return false; } finally { // close connection and clear out headers // SmtpClient instance nulled out this.Close(); } return true; } /// <summary> /// Configures the message interface /// </summary> /// <param name="msg"></param> protected virtual MailMessage GetMessage() { MailMessage msg = new MailMessage(); msg.Body = this.Message; msg.Subject = this.Subject; msg.From = new MailAddress(this.SenderEmail, this.SenderName); if (!string.IsNullOrEmpty(this.ReplyTo)) msg.ReplyTo = new MailAddress(this.ReplyTo); // Send all the different recipients this.AssignMailAddresses(msg.To, this.Recipient); this.AssignMailAddresses(msg.CC, this.CC); this.AssignMailAddresses(msg.Bcc, this.BCC); if (!string.IsNullOrEmpty(this.Attachments)) { string[] files = this.Attachments.Split(new char[2] { ',', ';' }, StringSplitOptions.RemoveEmptyEntries); foreach (string file in files) { msg.Attachments.Add(new Attachment(file)); } } if (this.ContentType.StartsWith("text/html")) msg.IsBodyHtml = true; else msg.IsBodyHtml = false; msg.BodyEncoding = this.Encoding; … additional code omitted return msg; } Basically this code collects all the property settings of the wrapper object and applies them to the SmtpClient and in GetMessage() to an individual MailMessage properties. Specifically notice that attachment filenames are converted from a comma-delimited string to filenames from which new attachments are created. The code as it’s written however, will cause the problem with file attachments not being released properly. Internally .NET opens up stream handles and reads the files from disk to dump them into the email send stream. The attachments are always sent correctly but the local files are not immediately closed. As you probably guessed the issue is simply that some resources are not automatcially disposed when sending is complete and sure enough the following code change fixes the problem: // Create and configure the message using (MailMessage msg = this.GetMessage()) { smtp.Send(msg); if (this.SendComplete != null) this.OnSendComplete(this); // or use an explicit msg.Dispose() here } The Message object requires an explicit call to Dispose() (or a using() block as I have here) to force the attachment files to get closed. I think this is rather odd behavior for this scenario however. The code I use passes in filenames and my expectation of an API that accepts file names is that it uses the files by opening and streaming them and then closing them when done. Why keep the streams open and require an explicit .Dispose() by the calling code which is bound to lead to unexpected behavior just as my customer ran into? Any API level code should clean up as much as possible and this is clearly not happening here resulting in unexpected behavior. Apparently lots of other folks have run into this before as I found based on a few Twitter comments on this topic. Odd to me too is that SmtpClient() doesn’t implement IDisposable – it’s only the MailMessage (and Attachments) that implement it and require it to clean up for left over resources like open file handles. This means that you couldn’t even use a using() statement around the SmtpClient code to resolve this – instead you’d have to wrap it around the message object which again is rather unexpected. Well, chalk that one up to another small unexpected behavior that wasted a half an hour of my time – hopefully this post will help someone avoid this same half an hour of hunting and searching. Resources: Full code to SmptClientNative (West Wind Web Toolkit Repository) SmtpClient Documentation MSDN © Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  

  Read the article

• Render MVCContrib Grid with No Header Row

  - by Ben Griswold

  The MVCContrib Grid allows for the easy construction of HTML tables for displaying data from a collection of Model objects. I add this component to all of my ASP.NET MVC projects.  If you aren’t familiar with what the grid has to offer, it’s worth the looking into. What you may notice in the busy example below is the fact that I render my column headers independent of the grid contents.  This allows me to keep my headers fixed while the user searches through the table content which is displayed in a scrollable div*.  Thus, I needed a way to render my grid without headers. That’s where Grid Renderers come into play.  <table border="0" cellspacing="0" cellpadding="0" class="projectHeaderTable">     <tr>         <td class="memberTableMemberHeader">             <%= Html.GridColumnHeader("Member", "Index", "MemberFullName")%>              </td>         <td class="memberTableRoleHeader">             <%= Html.GridColumnHeader("Role", "Index", "ProjectRoleTypeName")%>              </td>                <td class="memberTableActionHeader">             Action         </td>     </tr> </table> <div class="scrollContentWrapper"> <% Html.Grid(Model)     .Columns(column =>             {                 column.For(c => c.MemberFullName).Attributes(@class => "memberTableMemberCol");                 column.For(c => c.ProjectRoleTypeName).Attributes(@class => "memberTableRoleCol");                 column.For(x => Html.ActionLink("View", "Details", new { Id = x.ProjectMemberId }) + " | " +                                 Html.ActionLink("Edit", "Edit", new { Id = x.ProjectMemberId }) + " | " +                                 Html.ActionLink("Remove", "Delete", new { Id = x.ProjectMemberId }))                     .Attributes(@class => "memberTableActionCol").DoNotEncode();             })     .Empty("There are no members associated with this project.")     .Attributes(@class => "lbContent")     .RenderUsing(new GridNoHeaderRenderer<ProjectMemberDetailsViewModel>())     .Render(); %> </div> <div class="scrollContentBottom">     <!– –> </div> <%=Html.Pager(Model) %> Maybe you noticed the reference to the GridNoHeaderRenderer class above?  Yep, rendering the grid with no header is straightforward.   public class GridNoHeaderRenderer<T> :     HtmlTableGridRenderer<T> where T: class {     protected override bool RenderHeader()     {         // Explicitly returning true would suppress the header         // just fine, however, Render() will always assume that         // items exist in collection and RenderEmpty() will         // never be called.           // In other words, return ShouldRenderHeader() if you         // want to maintain the Empty text when no items exist.         return ShouldRenderHeader();     } } Well, if you read through the comments, there is one catch.  You might be tempted to have the RenderHeader method always return true.  This would work just fine but you should return the result of ShouldRenderHeader() instead so the Empty text will continue to display if there are no items in the collection. The GridRenderer feature found in the MVCContrib Grid is so well put together, I just had to share.  * Though you can find countless alternatives to the fixed headers problem online, this is the only solution that I’ve ever found to reliably work across browsers. If you know something I don’t, please share.

  Read the article

• Using C# 4.0’s DynamicObject as a Stored Procedure Wrapper

  - by EltonStoneman

  [Source: http://geekswithblogs.net/EltonStoneman] Overview Ignoring the fashion, I still make a lot of use of DALs – typically when inheriting a codebase with an established database schema which is full of tried and trusted stored procedures. In the DAL a collection of base classes have all the scaffolding, so the usual pattern is to create a wrapper class for each stored procedure, giving typesafe access to parameter values and output. DAL calls then looks like instantiate wrapper-populate parameters-execute call:       using (var sp = new uspGetManagerEmployees())     {         sp.ManagerID = 16;         using (var reader = sp.Execute())         {             //map entities from the output         }     }   Or rolling it all into a fluent DAL call – which is nicer to read and implicitly disposes the resources:   This is fine, the wrapper classes are very simple to handwrite or generate. But as the codebase grows, you end up with a proliferation of very small wrapper classes: The wrappers don't add much other than encapsulating the stored procedure call and giving you typesafety for the parameters. With the dynamic extension in .NET 4.0 you have the option to build a single wrapper class, and get rid of the one-to-one stored procedure to wrapper class mapping. In the dynamic version, the call looks like this:       dynamic getUser = new DynamicSqlStoredProcedure("uspGetManagerEmployees", Database.AdventureWorks);     getUser.ManagerID = 16;       var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From(getUser);   The important difference is that the ManagerId property doesn't exist in the DynamicSqlStoredProcedure class. Declaring the getUser object with the dynamic keyword allows you to dynamically add properties, and the DynamicSqlStoredProcedure class intercepts when properties are added and builds them as stored procedure parameters. When getUser.ManagerId = 16 is executed, the base class adds a parameter call (using the convention that parameter name is the property name prefixed by "@"), specifying the correct SQL Server data type (mapping it from the type of the value the property is set to), and setting the parameter value. Code Sample This is worked through in a sample project on github – Dynamic Stored Procedure Sample – which also includes a static version of the wrapper for comparison. (I'll upload this to the MSDN Code Gallery once my account has been resurrected). Points worth noting are: DynamicSP.Data – database-independent DAL that has all the data plumbing code. DynamicSP.Data.SqlServer – SQL Server DAL, thin layer on top of the generic DAL which adds SQL Server specific classes. Includes the DynamicSqlStoredProcedure base class. DynamicSqlStoredProcedure.TrySetMember. Invoked when a dynamic member is added. Assumes the property is a parameter named after the SP parameter name and infers the SqlDbType from the framework type. Adds a parameter to the internal stored procedure wrapper and sets its value. uspGetManagerEmployees – the static version of the wrapper. uspGetManagerEmployeesTest – test fixture which shows usage of the static and dynamic stored procedure wrappers. The sample uses stored procedures from the AdventureWorks database in the SQL Server 2008 Sample Databases. Discussion For this scenario, the dynamic option is very favourable. Assuming your DAL is itself wrapped by a higher layer, the stored procedure wrapper classes have very little reuse. Even if you're codegening the classes and test fixtures, it's still additional effort for very little value. The main consideration with dynamic classes is that the compiler ignores all the members you use, and evaluation only happens at runtime. In this case where scope is strictly limited that's not an issue – but you're relying on automated tests rather than the compiler to find errors, but that should just encourage better test coverage. Also you can codegen the dynamic calls at a higher level. Performance may be a consideration, as there is a first-time-use overhead when the dynamic members of an object are bound. For a single run, the dynamic wrapper took 0.2 seconds longer than the static wrapper. The framework does a good job of caching the effort though, so for 1,000 calls the dynamc version still only takes 0.2 seconds longer than the static: You don't get IntelliSense on dynamic objects, even for the declared members of the base class, and if you've been using class names as keys for configuration settings, you'll lose that option if you move to dynamics. The approach may make code more difficult to read, as you can't navigate through dynamic members, but you do still get full debugging support.     var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From<uspGetManagerEmployees>                             (                                 i => i.ManagerID = 16,                                 x => x.Execute()                             );

  Read the article

• jQuery 1.4 Opacity and IE Filters

  - by Rick Strahl

  Ran into a small problem today with my client side jQuery library after switching to jQuery 1.4. I ran into a problem with a shadow plugin that I use to provide drop shadows for absolute elements – for Mozilla WebKit browsers the –moz-box-shadow and –webkit-box-shadow CSS attributes are used but for IE a manual element is created to provide the shadow that underlays the original element along with a blur filter to provide the fuzziness in the shadow. Some of the key pieces are: var vis = el.is(":visible"); if (!vis) el.show(); // must be visible to get .position var pos = el.position(); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); This has always worked in previous versions of jQuery, but with 1.4 the original filter no longer works. It appears that applying the opacity after the original filter wipes out the original filter. IOW, the opacity filter is not applied incrementally, but absolutely which is a real bummer. Luckily the workaround is relatively easy by just switching the order in which the opacity and filter are applied. If I apply the blur after the opacity I get my correct behavior back with both opacity: sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); While this works this still causes problems in other areas where opacity is implicitly set in code such as for fade operations or in the case of my shadow component the style/property watcher that keeps the shadow and main object linked. Both of these may set the opacity explicitly and that is still broken as it will effectively kill the blur filter. This seems like a really strange design decision by the jQuery team, since clearly the jquery css function does the right thing for setting filters. Internally however, the opacity setting doesn’t use .css instead hardcoding the filter which given jQuery’s usual flexibility and smart code seems really inappropriate. The following is from jQuery.js 1.4: var style = elem.style || elem, set = value !== undefined; // IE uses filters for opacity if ( !jQuery.support.opacity && name === "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level style.zoom = 1; // Set the alpha filter to set the opacity var opacity = parseInt( value, 10 ) + "" === "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"; var filter = style.filter || jQuery.curCSS( elem, "filter" ) || ""; style.filter = ralpha.test(filter) ? filter.replace(ralpha, opacity) : opacity; } return style.filter && style.filter.indexOf("opacity=") >= 0 ? (parseFloat( ropacity.exec(style.filter)[1] ) / 100) + "": ""; } You can see here that the style is explicitly set in code rather than relying on $.css() to assign the value resulting in the old filter getting wiped out. jQuery 1.32 looks a little different: // IE uses filters for opacity if ( !jQuery.support.opacity && name == "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level elem.zoom = 1; // Set the alpha filter to set the opacity elem.filter = (elem.filter || "").replace( /alpha\([^)]*\)/, "" ) + (parseInt( value ) + '' == "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"); } return elem.filter && elem.filter.indexOf("opacity=") >= 0 ? (parseFloat( elem.filter.match(/opacity=([^)]*)/)[1] ) / 100) + '': ""; } Offhand I’m not sure why the latter works better since it too is assigning the filter. However, when checking with the IE script debugger I can see that there are actually a couple of filter tags assigned when using jQuery 1.32 but only one when I use jQuery 1.4. Note also that the jQuery 1.3 compatibility plugin for jQUery 1.4 doesn’t address this issue either. Resources ww.jquery.js (shadow plug-in $.fn.shadow) © Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery  

  Read the article

• SQL SERVER – Solution to Puzzle – Simulate LEAD() and LAG() without Using SQL Server 2012 Analytic Function

  - by pinaldave

  Earlier I wrote a series on SQL Server Analytic Functions of SQL Server 2012. During the series to keep the learning maximum and having fun, we had few puzzles. One of the puzzle was simulating LEAD() and LAG() without using SQL Server 2012 Analytic Function. Please read the puzzle here first before reading the solution : Write T-SQL Self Join Without Using LEAD and LAG. When I was originally wrote the puzzle I had done small blunder and the question was a bit confusing which I corrected later on but wrote a follow up blog post on over here where I describe the give-away. Quick Recap: Generate following results without using SQL Server 2012 analytic functions. I had received so many valid answers. Some answers were similar to other and some were very innovative. Some answers were very adaptive and some did not work when I changed where condition. After selecting all the valid answer, I put them in table and ran RANDOM function on the same and selected winners. Here are the valid answers. No Joins and No Analytic Functions Excellent Solution by Geri Reshef – Winner of SQL Server Interview Questions and Answers (India | USA) WITH T1 AS (SELECT Row_Number() OVER(ORDER BY SalesOrderDetailID) N, s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663)) SELECT SalesOrderID,SalesOrderDetailID,OrderQty, CASE WHEN N%2=1 THEN MAX(CASE WHEN N%2=0 THEN SalesOrderDetailID END) OVER (Partition BY (N+1)/2) ELSE MAX(CASE WHEN N%2=1 THEN SalesOrderDetailID END) OVER (Partition BY N/2) END LeadVal, CASE WHEN N%2=1 THEN MAX(CASE WHEN N%2=0 THEN SalesOrderDetailID END) OVER (Partition BY N/2) ELSE MAX(CASE WHEN N%2=1 THEN SalesOrderDetailID END) OVER (Partition BY (N+1)/2) END LagVal FROM T1 ORDER BY SalesOrderID, SalesOrderDetailID, OrderQty; GO No Analytic Function and Early Bird Excellent Solution by DHall – Winner of Pluralsight 30 days Subscription -- a query to emulate LEAD() and LAG() ;WITH s AS ( SELECT 1 AS ldOffset, -- equiv to 2nd param of LEAD 1 AS lgOffset, -- equiv to 2nd param of LAG NULL AS ldDefVal, -- equiv to 3rd param of LEAD NULL AS lgDefVal, -- equiv to 3rd param of LAG ROW_NUMBER() OVER (ORDER BY SalesOrderDetailID) AS row, SalesOrderID, SalesOrderDetailID, OrderQty FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ) SELECT s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty, ISNULL( sLd.SalesOrderDetailID, s.ldDefVal) AS LeadValue, ISNULL( sLg.SalesOrderDetailID, s.lgDefVal) AS LagValue FROM s LEFT OUTER JOIN s AS sLd ON s.row = sLd.row - s.ldOffset LEFT OUTER JOIN s AS sLg ON s.row = sLg.row + s.lgOffset ORDER BY s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty No Analytic Function and Partition By Excellent Solution by DHall – Winner of Pluralsight 30 days Subscription /* a query to emulate LEAD() and LAG() */ ;WITH s AS ( SELECT 1 AS LeadOffset, /* equiv to 2nd param of LEAD */ 1 AS LagOffset, /* equiv to 2nd param of LAG */ NULL AS LeadDefVal, /* equiv to 3rd param of LEAD */ NULL AS LagDefVal, /* equiv to 3rd param of LAG */ /* Try changing the values of the 4 integer values above to see their effect on the results */ /* The values given above of 0, 0, null and null behave the same as the default 2nd and 3rd parameters to LEAD() and LAG() */ ROW_NUMBER() OVER (ORDER BY SalesOrderDetailID) AS row, SalesOrderID, SalesOrderDetailID, OrderQty FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ) SELECT s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty, ISNULL( sLead.SalesOrderDetailID, s.LeadDefVal) AS LeadValue, ISNULL( sLag.SalesOrderDetailID, s.LagDefVal) AS LagValue FROM s LEFT OUTER JOIN s AS sLead ON s.row = sLead.row - s.LeadOffset /* Try commenting out this next line when LeadOffset != 0 */ AND s.SalesOrderID = sLead.SalesOrderID /* The additional join criteria on SalesOrderID above is equivalent to PARTITION BY SalesOrderID in the OVER clause of the LEAD() function */ LEFT OUTER JOIN s AS sLag ON s.row = sLag.row + s.LagOffset /* Try commenting out this next line when LagOffset != 0 */ AND s.SalesOrderID = sLag.SalesOrderID /* The additional join criteria on SalesOrderID above is equivalent to PARTITION BY SalesOrderID in the OVER clause of the LAG() function */ ORDER BY s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty No Analytic Function and CTE Usage Excellent Solution by Pravin Patel - Winner of SQL Server Interview Questions and Answers (India | USA) --CTE based solution ; WITH cteMain AS ( SELECT SalesOrderID, SalesOrderDetailID, OrderQty, ROW_NUMBER() OVER (ORDER BY SalesOrderDetailID) AS sn FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ) SELECT m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty, sLead.SalesOrderDetailID AS leadvalue, sLeg.SalesOrderDetailID AS leagvalue FROM cteMain AS m LEFT OUTER JOIN cteMain AS sLead ON sLead.sn = m.sn+1 LEFT OUTER JOIN cteMain AS sLeg ON sLeg.sn = m.sn-1 ORDER BY m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty No Analytic Function and Co-Related Subquery Usage Excellent Solution by Pravin Patel – Winner of SQL Server Interview Questions and Answers (India | USA) -- Co-Related subquery SELECT m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty, ( SELECT MIN(SalesOrderDetailID) FROM Sales.SalesOrderDetail AS l WHERE l.SalesOrderID IN (43670, 43669, 43667, 43663) AND l.SalesOrderID >= m.SalesOrderID AND l.SalesOrderDetailID > m.SalesOrderDetailID ) AS lead, ( SELECT MAX(SalesOrderDetailID) FROM Sales.SalesOrderDetail AS l WHERE l.SalesOrderID IN (43670, 43669, 43667, 43663) AND l.SalesOrderID <= m.SalesOrderID AND l.SalesOrderDetailID < m.SalesOrderDetailID ) AS leag FROM Sales.SalesOrderDetail AS m WHERE m.SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty This was one of the most interesting Puzzle on this blog. Giveaway Winners will get following giveaways. Geri Reshef and Pravin Patel SQL Server Interview Questions and Answers (India | USA) DHall Pluralsight 30 days Subscription Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Function, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Your thoughts on Best Practices for Scientific Computing?

  - by John Smith

  A recent paper by Wilson et al (2014) pointed out 24 Best Practices for scientific programming. It's worth to have a look. I would like to hear opinions about these points from experienced programmers in scientific data analysis. Do you think these advices are helpful and practical? Or are they good only in an ideal world? Wilson G, Aruliah DA, Brown CT, Chue Hong NP, Davis M, Guy RT, Haddock SHD, Huff KD, Mitchell IM, Plumbley MD, Waugh B, White EP, Wilson P (2014) Best Practices for Scientific Computing. PLoS Biol 12:e1001745. http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.1001745 Box 1. Summary of Best Practices Write programs for people, not computers. (a) A program should not require its readers to hold more than a handful of facts in memory at once. (b) Make names consistent, distinctive, and meaningful. (c) Make code style and formatting consistent. Let the computer do the work. (a) Make the computer repeat tasks. (b) Save recent commands in a file for re-use. (c) Use a build tool to automate workflows. Make incremental changes. (a) Work in small steps with frequent feedback and course correction. (b) Use a version control system. (c) Put everything that has been created manually in version control. Don’t repeat yourself (or others). (a) Every piece of data must have a single authoritative representation in the system. (b) Modularize code rather than copying and pasting. (c) Re-use code instead of rewriting it. Plan for mistakes. (a) Add assertions to programs to check their operation. (b) Use an off-the-shelf unit testing library. (c) Turn bugs into test cases. (d) Use a symbolic debugger. Optimize software only after it works correctly. (a) Use a profiler to identify bottlenecks. (b) Write code in the highest-level language possible. Document design and purpose, not mechanics. (a) Document interfaces and reasons, not implementations. (b) Refactor code in preference to explaining how it works. (c) Embed the documentation for a piece of software in that software. Collaborate. (a) Use pre-merge code reviews. (b) Use pair programming when bringing someone new up to speed and when tackling particularly tricky problems. (c) Use an issue tracking tool. I'm relatively new to serious programming for scientific data analysis. When I tried to write code for pilot analyses of some of my data last year, I encountered tremendous amount of bugs both in my code and data. Bugs and errors had been around me all the time, but this time it was somewhat overwhelming. I managed to crunch the numbers at last, but I thought I couldn't put up with this mess any longer. Some actions must be taken. Without a sophisticated guide like the article above, I started to adopt "defensive style" of programming since then. A book titled "The Art of Readable Code" helped me a lot. I deployed meticulous input validations or assertions for every function, renamed a lot of variables and functions for better readability, and extracted many subroutines as reusable functions. Recently, I introduced Git and SourceTree for version control. At the moment, because my co-workers are much more reluctant about these issues, the collaboration practices (8a,b,c) have not been introduced. Actually, as the authors admitted, because all of these practices take some amount of time and effort to introduce, it may be generally hard to persuade your reluctant collaborators to comply them. I think I'm asking your opinions because I still suffer from many bugs despite all my effort on many of these practices. Bug fix may be, or should be, faster than before, but I couldn't really measure the improvement. Moreover, much of my time has been invested on defence, meaning that I haven't actually done much data analysis (offence) these days. Where is the point I should stop at in terms of productivity? I've already deployed: 1a,b,c, 2a, 3a,b,c, 4b,c, 5a,d, 6a,b, 7a,7b I'm about to have a go at: 5b,c Not yet: 2b,c, 4a, 7c, 8a,b,c (I could not really see the advantage of using GNU make (2c) for my purpose. Could anyone tell me how it helps my work with MATLAB?)

  Read the article

• SSAS Compare: an intern’s journey

  - by Red Gate Software BI Tools Team

  About a month ago, David mentioned an intern working in the BI Tools Team. That intern happens to be me! In five weeks’ time, I’ll start my second year of Computer Science at the University of Cambridge and be a full-time student again, but for the past eight weeks, I’ve been living a completely different life. As Jon mentioned before, the teams here at Red Gate are small and everyone (including the interns!) is responsible for the product as a whole. I’ve attended planning sessions, UX tests, daily meetings, and everything else a full-time member of the team would; I had as much say in where we would go next with the product as anyone; I was able to see that what I was doing was an important part of the product from the feedback we got in the UX tests. All these things almost made me forget that this is just an internship and not my full-time job. First steps at Red Gate Being based in Cambridge, Red Gate has many Cambridge university graduates working for them. They also hire some Cambridge undergraduates for internships each summer. With its popularity with university graduates and its great working environment, Red Gate has managed to build up a great reputation. When I thought of doing an internship here in Cambridge, Red Gate just seemed to be the obvious choice for my first real work experience. On my first day at Red Gate, David, the lead developer for SSAS Compare, helped me settle in and explained what I’d be doing. My task was to improve the user experience of displaying differences between MDX scripts by syntax highlighting, script formatting, and improving the difference identification in the first place. David suggested how I should approach the problem, but left all the details and design decisions to me. That was when I realised how much independence and responsibility I’d have. What I’ve done If you launch the latest version of SSAS Compare and drill down to an MDX script difference, you can see the changes that have been made. In earlier versions, you could only see the scripts in plain text on both sides — either in black or grey, depending on whether they were the same or not. However, you couldn’t see exactly where the scripts were different, which was especially annoying when the two scripts were large – as they often are. Furthermore, if parts of the two scripts were formatted differently, they seemed to be different but were actually the same, which caused even more confusion and made it difficult to see where the differences were. All these issues have been fixed now. The two scripts are automatically formatted by the tool so that if two things are syntactically equivalent, they look the same – including case differences in keywords! The actual difference is highlighted in grey, which makes them easy to spot. The difference identification has been improved as well, so two scripts aren’t identified as different if there’s just a difference in meaningless whitespace characters, or when you have “select” on one side and “SELECT” on the other. We also have syntax highlighting, which makes it easier to read the scripts. How I did it In order to do the formatting properly, we decided to parse the MDX scripts. After some investigation into parser builders, I decided to go with the GOLD Parser builder and the bsn-goldparser .NET engine. GOLD Parser builder provides a fairly nice GUI to write, build, and test grammar in. We also liked the idea of separating the grammar building from parsing a text. The bsn-goldparser is one of many .NET engines for GOLD, and although it doesn’t support the newest features of GOLD Parser, it has “the ability to map semantic action classes to terminals or reduction rules, so that a completely functional semantic AST can be created directly without intermediate token AST representation, and without the need for glue code.” That makes it much easier for us to change the implementation in our program when we change the grammar. As bsn-goldparser is open source, and I wanted some more features in it, I contributed two new features which have now been merged to the project. Unfortunately, there wasn’t an MDX grammar written for GOLD already, so I had to write it myself. I was referencing MSDN to get the formal grammar specification, but the specification was all over the place, so it wasn’t that easy to implement and find. We’re aware that we don’t yet fully support all valid MDX, so sometimes you’ll just see the MDX script difference displayed the old way. In that case, there is some grammar construct we don’t yet recognise. If you come across something SSAS Compare doesn’t recognise, we’d love to hear about it so we can add it to our grammar. When some MDX script gets parsed, a tree is produced. That tree can then be processed into a list of inlines which deal with the correct formatting and can be outputted to the screen. Doing all this has led me to many new technologies and projects I haven’t worked with before. This was my first experience with C# and Visual Studio, although I have done things in Java before. I have learnt how to unit test with NUnit, how to do dependency injection with Ninject, how to source-control code with SVN and Mercurial, how to build with TeamCity, how to use GOLD, and many other things. What’s coming next Sadly, my internship comes to an end this week, so there will be less development on MDX difference view for a while. But the team is going to work on marking the differences better and making it consistent with difference indication in the top part of comparison window, and will keep adding support for more MDX grammar so you can see the differences easily in every comparison you make. So long! And maybe I’ll see you next summer!

  Read the article

• Multitask Like a Pro with AquaSnap

  - by Matthew Guay

  Are you tired of shuffling back and forth between windows?  Here’s a handy app that can help you keep all of your windows organized and accessible. AquaSnap is a great free utility that helps you use multiple windows at the same time easily and efficiently.  One of Windows 7’s greatest new features is Aero Snap, which lets you easily view windows side by side by simply dragging windows to side of your screen.  After using Windows 7 for the past year, Aero Snap is one of the features we really miss when using older versions of Windows. With AquaSnap, you now have all of the features of Aero Snap and more in Windows 2000, XP, Vista, and of course Windows 7.  Not only does it give you Aero Snap features, but AquaSnap also gives you more control over your windows to make you more productive. Getting Started AquaSnap is a a free download for Windows 2000, XP, Vista, and 7.  Download the small installer (link below) and install it with the default settings. AquaSnap automatically runs as soon as it is installed, and you will notice a new icon in your system tray. Now you can go ahead and put it to use.  Drag a window to any edge or corner of your desktop, and you will see an icon showing what part of the screen the window will cover. Dragging it to the side of the screen expanded the window to fill the right half of the screen, just like the default Aero Snap in Windows 7.  You can drag the window away to restore it to its former size. AquaSnap works on any corner of the screen too, so you can have 4 windows side-by-side.  We already have 3 windows snapped to the corners, and notice that we’re dragging a fourth window to the bottom right corner. You can also snap windows to the bottom and top of the screen.  Here we have Word snapped to the bottom half of the screen, and we’re dragging Chrome to the top. You can even snap internal windows in Multiple Document Interface (MDI) programs such as Excel.  Here we are snapping a workbook in Excel to the left to view 2 workbooks side-by-side.   Additionally, AquaSnap lets you keep any window always on top.  Simply shake any window, and it will turn semi-transparent and stay on top of all other windows.  Notice the transparent calculator here on top of Excel. All of AquaSnap’s features work great in Windows 2000, XP, and Vista too.  Here we are snapping IE6 to the left of the screen in XP. Here are 3 windows snapped to the sides in XP.  You can mix the snap modes, and have, for instance, two windows on the right side and one window on the left.  This is a great way to maximize productivity if you need more space in one of the windows. Even AquaShake works to keep a window transparent and on top in XP. Settings AquaSnap has a detailed settings dialog where you can tweak it to work exactly like you want.  Simply right-click on its icon in the taskbar, and select Settings. From the first screen, you can choose if you want AquaSnap to start with Windows, and if you want it to show an icon in the system tray.  If you turn off the system tray icon, you can access the AquaSnap settings from Start > All Programs > AquaSnap > Configuration (or simply search for Configuration in Vista or Windows 7). The second tab in settings lets you choose what you want each snapping region to do.  You can also choose two other presets, including AeroSnap (which works just like the default Aero Snap in Windows 7) and AquaSnap simple (which only snaps at the edges of the screen, not the corners). The third tab lets you increase or decrease the opacity of pinned windows when using AquaShake, and also lets you increase or decrease the shaking sensitivity.  Additionally, if you prefer the standard AeroShake functionality, which minimizes all other open windows when you shake a window, you can choose that too. The fourth tab lets you activate an optional feature, AquaGlass.  If you activate this, it will make windows turn transparent when you drag them across the screen.   Finally, the last tab lets you change the color and opacity of the preview rectangle, or simply turn it off. Or, if you want to temporarily turn AquaSnap off, simply right-click on its icon and select Off.  In Windows 7, turning off AquaSnap will restore your standard Windows Aero Snap functionality, and in other version of Windows it will stop letting you snap windows at all.  You can then repeat the steps and select On when you want to use AquaSnap again. Conclusion AquaSnap is a handy tool to make you more productive at your computer.  With a wide variety of useful features, there’s something here for everyone.  Download AquaSnap Similar Articles Productive Geek Tips How to Get Virtual Desktops on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

  Read the article

• Figuring out the IIS Version for a given OS in .NET Code

  - by Rick Strahl

  Here's an odd requirement: I need to figure out what version of IIS is available on a given machine in order to take specific configuration actions when installing an IIS based application. I build several configuration tools for application configuration and installation and depending on which version of IIS is available on IIS different configuration paths are taken. For example, when dealing with XP machine you can't set up an Application Pool for an application because XP (IIS 5.1) didn't support Application pools. Configuring 32 and 64 bit settings are easy in IIS 7 but this didn't work in prior versions and so on. Along the same lines I saw a question on the AspInsiders list today, regarding a similar issue where somebody needed to know the IIS version as part of an ASP.NET application prior to when the Request object is available. So it's useful to know which version of IIS you can possibly expect. This should be easy right? But it turns there's no real easy way to detect IIS on a machine. There's no registry key that gives you the full version number - you can detect installation but not which version is installed. The easiest way: Request.ServerVariables["SERVER_SOFTWARE"] The easiest way to determine IIS version number is if you are already running inside of ASP.NET and you are inside of an ASP.NET request. You can look at Request.ServerVariables["SERVER_SOFTWARE"] to get a string like Microsoft-IIS/7.5 returned to you. It's a cinch to parse this to retrieve the version number. This works in the limited scenario where you need to know the version number inside of a running ASP.NET application. Unfortunately this is not a likely use case, since most times when you need to know a specific version of IIS when you are configuring or installing your application. The messy way: Match Windows OS Versions to IIS Versions Since Version 5.x of IIS versions of IIS have always been tied very closely to the Operating System. Meaning the only way to get a specific version of IIS was through the OS - you couldn't install another version of IIS on the given OS. Microsoft has a page that describes the OS version to IIS version relationship here: http://support.microsoft.com/kb/224609 In .NET you can then sniff the OS version and based on that return the IIS version. The following is a small utility function that accomplishes the task of returning an IIS version number for a given OS: /// <summary> /// Returns the IIS version for the given Operating System. /// Note this routine doesn't check to see if IIS is installed /// it just returns the version of IIS that should run on the OS. /// /// Returns the value from Request.ServerVariables["Server_Software"] /// if available. Otherwise uses OS sniffing to determine OS version /// and returns IIS version instead. /// </summary> /// <returns>version number or -1 </returns> public static decimal GetIisVersion() { // if running inside of IIS parse the SERVER_SOFTWARE key // This would be most reliable if (HttpContext.Current != null && HttpContext.Current.Request != null) { string os = HttpContext.Current.Request.ServerVariables["SERVER_SOFTWARE"]; if (!string.IsNullOrEmpty(os)) { //Microsoft-IIS/7.5 int dash = os.LastIndexOf("/"); if (dash > 0) { decimal iisVer = 0M; if (Decimal.TryParse(os.Substring(dash + 1), out iisVer)) return iisVer; } } } decimal osVer = (decimal) Environment.OSVersion.Version.Major + ((decimal) Environment.OSVersion.Version.MajorRevision / 10); // Windows 7 and Win2008 R2 if (osVer == 6.1M) return 7.5M; // Windows Vista and Windows 2008 else if (osVer == 6.0M) return 7.0M; // Windows 2003 and XP 64 bit else if (osVer == 5.2M) return 6.0M; // Windows XP else if (osVer == 5.1M) return 5.1M; // Windows 2000 else if (osVer == 5.0M) return 5.0M; // error result return -1M; } } Talk about a brute force apporach, but it works. This code goes only back to IIS 5 - anything before that is not something you possibly would want to have running. :-) Note that this is updated through Windows 7/Windows Server 2008 R2. Later versions will need to be added as needed. Anybody know what the Windows Version number of Windows 8 is?© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  IIS   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Aamir Khan’s Satyamev Jayate stirs a movement

  - by Gopinath

  Bollywood actor Aamir Khan is known for his dedication and hard work in inspiring millions of viewers though movies by discussing social problems and motivating people to solve them. His movie Rang De Basanthi seeded Indian anti-corruption movement, Tare Zameen Par touched the problems faced by few challenged kids and the latest movie 3 idiots exposed how education institutions in India are producing lakhs of Donkeys out of colleges every year. He extended his dedication of serving the society to small screen with the launch of reality TV show Satyamev Jayate. Before you start misjudging it as one of those non sense drama / entertaining reality shows, let me tell you that it is not a typical music, games, fight or dance reality show. Satyamev Jayate is all about the real people of India, their problems and how to tackle them.  This is not just a reality show, its movement to educate people about the social evils. Its been many years since I spent couple of hours  in front of TV as most of the programs are too cynical or does not add much value.  In my childhood I use to anxiously wait for Mahabarath or He-Man TV shows to start but after a two decades I waited anxiously for the start of Satyamev Jayate. The wait was worth and the 1 hours 30 minutes spent watching it meaningful. When was the last time you were so satisfied after watching a TV show and inspired to do something? I don’t remember. Today, the show focused on female foeticide and its impact. It showed women who were tortured and forced to abort female foetuses. On the show few brave women shared their experiences of giving birth to girl babies and rough times they are going through with their in-laws & husbands. The show not only focused on the problem but also on the root cause of the evil,  inspiring people working to tackle it and what every individual can do his part to solve it.  The best part of the show is,  its not a blame game. When there is a problem most of the people quickly get into identifying who is wrong and start blaming them instead of solve the actual problem.  Aamir did not blame anyone for female foeticide – neither the government who don’t impose strict rules, nor the doctors who abort girl babies to make money or the mother-in-laws & husbands who torcher girl baby mothers are blamed. He careful highlighted the problem, showed horrifying statistics and their impact on the future society and few inspiring people working to tackle the problem.  He touched heart and stirred a movement against the issue. First time ever I voted for a reality show through SMS and it’s for Satyamev Jayate. I’m proud to do so. Here are the few reactions of popular people, activists & media about the program @aamir_khan absolutely the best program I have seen on TV in recent past. Thanku for converting an idiot box into an inspirationsl medium — Kiran Bedi (@thekiranbedi) May 6, 2012 Satyamev Jayate proves tht TV 2 can b a tool of social change. — Shekhar Kapur (@shekharkapur) May 6, 2012 i absolutely loved #satyamevjayate. at least aamir is doing what all of us only talk about. — Harsha Bhogle (@bhogleharsha) May 6, 2012 Now Television will no longer be called an idiot box,the VISION of Television broadens up with#SatyamevJayate !!! — Madhur Bhandarkar (@mbhandarkar268) May 6, 2012 The Sunday 11am slot seems to have come back with a bang… #SatyamevJayate — atul kasbekar (@atulkasbekar) May 6, 2012   I was spellbound, says Prasoon Joshi – It’s a unique show. I was completely bowled over by it. It’s a never-done before concept Aamir Khan strikes the right chord with Satyamev Jayate – The format is quite crisp. Talking about the emotional connect, there are moments when your eyes well up with tears, but the various segments ensure there’s more content than emotional drama ‘Satyamev Jayate’ gutsy, sensible show: Viewers – From filmmakers to clinical psychologists to professors – everyone has given the thumbs up to Aamir Khan’s television show ‘Satyamev Jayate’, saying it is a gutsy, hard-hitting and sensible programme that strikes an emotional chord with the audiences. Aamir Khan’s TV debut ‘Satyamev Jayate’ takes Twitter by storm – The roads of the capital sported a deserted look around 11 am on Sunday morning, as everyone was hooked on to their TV sets. Did you watch the program? What is your opinion? I’m waiting for next 11 AM of next Sunday. Are you?

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Getting the innermost .NET Exception

  - by Rick Strahl

  Here's a trivial but quite useful function that I frequently need in dynamic execution of code: Finding the innermost exception when an exception occurs, because for many operations (for example Reflection invocations or Web Service calls) the top level errors returned can be rather generic. A good example - common with errors in Reflection making a method invocation - is this generic error: Exception has been thrown by the target of an invocation In the debugger it looks like this: In this case this is an AJAX callback, which dynamically executes a method (ExecuteMethod code) which in turn calls into an Amazon Web Service using the old Amazon WSE101 Web service extensions for .NET. An error occurs in the Web Service call and the innermost exception holds the useful error information which in this case points at an invalid web.config key value related to the System.Net connection APIs. The "Exception has been thrown by the target of an invocation" error is the Reflection APIs generic error message that gets fired when you execute a method dynamically and that method fails internally. The messages basically says: "Your code blew up in my face when I tried to run it!". Which of course is not very useful to tell you what actually happened. If you drill down the InnerExceptions eventually you'll get a more detailed exception that points at the original error and code that caused the exception. In the code above the actually useful exception is two innerExceptions down. In most (but not all) cases when inner exceptions are returned, it's the innermost exception that has the information that is really useful. It's of course a fairly trivial task to do this in code, but I do it so frequently that I use a small helper method for this: /// <summary> /// Returns the innermost Exception for an object /// </summary> /// <param name="ex"></param> /// <returns></returns> public static Exception GetInnerMostException(Exception ex) { Exception currentEx = ex; while (currentEx.InnerException != null) { currentEx = currentEx.InnerException; } return currentEx; } This code just loops through all the inner exceptions (if any) and assigns them to a temporary variable until there are no more inner exceptions. The end result is that you get the innermost exception returned from the original exception. It's easy to use this code then in a try/catch handler like this (from the example above) to retrieve the more important innermost exception: object result = null; string stringResult = null; try { if (parameterList != null) // use the supplied parameter list result = helper.ExecuteMethod(methodToCall,target, parameterList.ToArray(), CallbackMethodParameterType.Json,ref attr); else // grab the info out of QueryString Values or POST buffer during parameter parsing // for optimization result = helper.ExecuteMethod(methodToCall, target, null, CallbackMethodParameterType.Json, ref attr); } catch (Exception ex) { Exception activeException = DebugUtils.GetInnerMostException(ex); WriteErrorResponse(activeException.Message, ( HttpContext.Current.IsDebuggingEnabled ? ex.StackTrace : null ) ); return; } Another function that is useful to me from time to time is one that returns all inner exceptions and the original exception as an array: /// <summary> /// Returns an array of the entire exception list in reverse order /// (innermost to outermost exception) /// </summary> /// <param name="ex">The original exception to work off</param> /// <returns>Array of Exceptions from innermost to outermost</returns> public static Exception[] GetInnerExceptions(Exception ex) {     List<Exception> exceptions = new List<Exception>();     exceptions.Add(ex);       Exception currentEx = ex;     while (currentEx.InnerException != null)     {         exceptions.Add(ex);     }       // Reverse the order to the innermost is first     exceptions.Reverse();       return exceptions.ToArray(); } This function loops through all the InnerExceptions and returns them and then reverses the order of the array returning the innermost exception first. This can be useful in certain error scenarios where exceptions stack and you need to display information from more than one of the exceptions in order to create a useful error message. This is rare but certain database exceptions bury their exception info in mutliple inner exceptions and it's easier to parse through them in an array then to manually walk the exception stack. It's also useful if you need to log errors and want to see the all of the error detail from all exceptions. None of this is rocket science, but it's useful to have some helpers that make retrieval of the critical exception info trivial. Resources DebugUtils.cs utility class in the West Wind Web Toolkit© Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  .NET  

  Read the article

• Handy ASP.NET MVC 2 Extension Methods &ndash; Where am I?

  - by Bobby Diaz

  Have you ever needed to detect what part of the application is currently being viewed?  This might be a bigger issue if you write a lot of shared/partial views or custom display or editor templates.  Another scenario, which is the one I encountered when I first started down this path, is when you have some type of menu and you’d like to be able to determine which item represents the current page so you can highlight it in some way.  A simple example is the menu that is created as part of the default ASP.NET MVC 2 Application template.   <div id="menucontainer">       <ul id="menu">         <li><%= Html.ActionLink("Home", "Index", "Home") %></li>         <li><%= Html.ActionLink("About", "About", "Home") %></li>     </ul>   </div>   The part that got me at first, however, was the following entry in the default style sheet (Site.css):   ul#menu li.selected a {     background-color: #fff;     color: #000; }   I assumed that the .selected class would automatically get applied to the active menu item.  After trying a few different things, including the MvcContrib MenuBuilder, I decided to write my own extension methods so I would have more control over the output.  First, I needed a way to determine what view the user has navigated to based on the requested URL and route configuration.  Now, I am sure there are many ways to do this, but this is what I came up with:   public static class RequestExtensions {     public static bool IsCurrentRoute(this RequestContext context, String areaName,         String controllerName, params String[] actionNames)     {         var routeData = context.RouteData;         var routeArea = routeData.DataTokens["area"] as String;         var current = false;           if ( ((String.IsNullOrEmpty(routeArea) && String.IsNullOrEmpty(areaName)) ||               (routeArea == areaName)) &&              ((String.IsNullOrEmpty(controllerName)) ||               (routeData.GetRequiredString("controller") == controllerName)) &&              ((actionNames == null) ||                actionNames.Contains(routeData.GetRequiredString("action"))) )         {             current = true;         }           return current;     }       // additional overloads omitted... }   With that in place, I was able to write several UrlHelper methods that check if the supplied values map to the current view.   public static class UrlExtensions {     public static bool IsCurrent(this UrlHelper urlHelper, String areaName,         String controllerName, params String[] actionNames)     {         return urlHelper.RequestContext.IsCurrentRoute(areaName, controllerName, actionNames);     }       public static string Selected(this UrlHelper urlHelper, String areaName,         String controllerName, params String[] actionNames)     {         return urlHelper.IsCurrent(areaName, controllerName, actionNames)             ? "selected" : String.Empty;     }       // additional overloads omitted... }   Now I can re-work the original menu to utilize these new methods.  Note: be sure to import the proper namespace so the extension methods become available inside your views!   <div id="menucontainer">       <ul id="menu">         <li class="<%= Url.Selected(null, "Home", "Index") %>">             <%= Html.ActionLink("Home", "Index", "Home")%></li>           <li class="<%= Url.Selected(null, "Home", "About") %>">             <%= Html.ActionLink("About", "About", "Home")%></li>     </ul>   </div>   If we take it one step further, we can clean up the markup even more.  Check out the Html.ActionMenuItem() extension method and the refined menu:   public static class HtmlExtensions {     public static MvcHtmlString ActionMenuItem(this HtmlHelper htmlHelper, String linkText,         String actionName, String controllerName)     {         var html = new StringBuilder("<li");           if ( htmlHelper.ViewContext.RequestContext                 .IsCurrentRoute(null, controllerName, actionName) )         {             html.Append(" class=\"selected\"");         }           html.Append(">")             .Append(htmlHelper.ActionLink(linkText, actionName, controllerName))             .Append("</li>");           return MvcHtmlString.Create(html.ToString());     }       // additional overloads omitted... }   <div id="menucontainer">       <ul id="menu">         <%= Html.ActionMenuItem("Home", "Index", "Home") %>         <%= Html.ActionMenuItem("About", "About", "Home") %>     </ul>   </div>   Which generates the following HTML:   <div id="menucontainer">       <ul id="menu">         <li class="selected"><a href="/">Home</a></li>         <li><a href="/Home/About">About</a></li>     </ul>   </div>     I have created a codepaste of these extension methods if you are interested in using them in your own projects.  Enjoy!

  Read the article

< Previous Page | 734 735 736 737 738 739 740 741 742 743 744 745  | Next Page >