android menu - Page 742

boot issues - long delay, then "gave up waiting for root device"

- by chazomaticus

I've had this issue on and off for about two years now. I noticed it on a new (custom built) machine running 10.04 when that first came out, but then it went away until a few months ago. I've gone through a number of hard drive changes but I can't say specifically what if anything I changed hardware-wise to make it stop or start happening. I had assumed upgrading to a modern Ubuntu version would fix the issue, so I installed 12.04 beta on a spare partition last night, but it's still happening. Here's the issue. After grub loads and I select a kernel to boot, the screen goes blank save for a blinking cursor. It sits in this state for many long minutes before it finally gives up and gives me an initramfs shell with the message gave up waiting for root device (and lists the /dev/disk/by-uuid/... path it was waiting for) but no other specific diagnostic information. Now, here's the tricky part. For one, the problem is intermittent - sometimes it progresses from the blinking cursor to the Ubuntu splash boot screen in a few seconds, and once it gets that far it always continues booting fine. The really bizarre thing is that I can "force" it to "find" the root device by repeatedly pressing the space bar and hitting the machine's power button. If I tap those enough, eventually I will notice the hard drive light coming on, at which point it will always continue the boot process after a few seconds. Interestingly, if I wait slightly too long before pressing the power button (30s?), as soon as I press it I get the gave up waiting message and the initramfs shell. I've tried setting up /etc/fstab (and the grub menu.lst or whatever it's called nowadays) to use device names (e.g. /dev/sda1) instead of UUIDs, but I get the same effect just with the device name, not UUID, in the error message. I should also mention that when I boot to Windows 7, there is no issue. It boots slowly all the time just by virtue of being Windows, but it never hangs indefinitely. This would seem to indicate it's a problem in Ubuntu, not the hardware. It's pretty annoying to have to babysit the computer every time it boots. Any ideas? I'm at a loss. Not even sure how to diagnose the issue. Thanks! EDIT: Here's some dmesg output from 10.04. The 15 second gap is where it was doing nothing. I pressed the power button and space bar a few times, and the stuff at 16 seconds happened. Not sure what any of it means. [ 1.320250] scsi18 : ahci [ 1.320294] scsi19 : ahci [ 1.320320] ata19: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe100 ir q 18 [ 1.320323] ata20: SATA max UDMA/133 abar m8192@0xfd4fe000 port 0xfd4fe180 ir q 18 [ 1.403886] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 1.562558] usb 2-4: configuration #1 chosen from 1 choice [ 16.477824] ata16: SATA link down (SStatus 0 SControl 300) [ 16.477843] ata19: SATA link down (SStatus 0 SControl 300) [ 16.477857] ata3: SATA link down (SStatus 0 SControl 300) [ 16.477895] ata15: SATA link down (SStatus 0 SControl 300) [ 16.477906] ata20: SATA link down (SStatus 0 SControl 300) [ 16.477977] ata17: SATA link down (SStatus 0 SControl 300) [ 16.478003] ata12: SATA link down (SStatus 0 SControl 300) [ 16.478046] ata13: SATA link down (SStatus 0 SControl 300) [ 16.478063] ata14: SATA link down (SStatus 0 SControl 300) [ 16.478108] ata11: SATA link down (SStatus 0 SControl 300) [ 16.478123] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.478127] ata6: SATA link down (SStatus 0 SControl 300) [ 16.478157] ata5: SATA link down (SStatus 0 SControl 300) [ 16.478193] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 After that, it took its sweet time, and I had to keep hitting space bar to coax it along. Here's some more dmesg output from a little later in the boot process: [ 17.982291] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.0/input/input4 [ 17.982335] generic-usb 0003:046E:5506.0002: input,hidraw1: USB HID v1.10 Key board [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0 [ 18.005211] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00 :13.0/usb5/5-2/5-2:1.1/input/input5 [ 18.005274] generic-usb 0003:046E:5506.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1 [ 22.484906] EXT4-fs (sda6): INFO: recovery required on readonly filesystem [ 22.484910] EXT4-fs (sda6): write access will be enabled during recovery [ 22.548542] EXT4-fs (sda6): recovery complete [ 22.549074] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 32.516772] Adding 20482832k swap on /dev/sda5. Priority:-1 extents:1 across:20482832k [ 32.742540] udev: starting version 151 [ 33.002004] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 33.008135] parport_pc 00:09: reported by Plug and Play ACPI [ 33.008186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.012076] lp: driver loaded but no devices found [ 33.037271] ppdev: user-space parallel port driver [ 33.090256] lp0: using parport0 (interrupt-driven). Any clues in there?

Read the article

Cookbook: SES and UCM setup

- by George Maggessy

The purpose of this post is to guide you setting up the integration between UCM and SES. On my next post I’ll show different approaches to integrate WebCenter Portal, UCM and SES based on some common scenarios. Let’s get started. WebCenter Content Configuration WebCenter Content has a component that adds functionality to the content server to allow it to be searched via the Oracle SES. To enable the component installation, go to Administration -> Admin Server and select SESCrawlerExport. Click the update button and restart UCM_server1 managed server. Once the managed server is back, we’ll configure the component. In the menu, under Administration you should see SESCrawlerExport. Click on the link. You’ll see the window below. Click on Configure SESCrawlerExport. Configure the values below: Hostname: SES hostname. Feed Location: Directory where data feeds will be saved. Metadata List: List of metadata that will be searchable by SES. After updating the values click on the Update button. Come back to the SESCrawlerExport Administration UI and click on Take Snapshot button. It will create the data feeds in the specified Feed Location. To check if the correct configuration was done, please access the following URL http://<ucm_server>:<port>/cs/idcplg?IdcService=SES_CRAWLER_DOWLOAD_CONFIG&source=default. It should download config file in the format below: <?xml version="1.0" encoding="UTF-8"?> <rsscrawler xmlns="http://xmlns.oracle.com/search/rsscrawlerconfig"> <feedLocation><![CDATA[http://adc6160699.us.oracle.com:16200/cs/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONTROL&source=default]]></feedLocation> <errorFileLocation><![CDATA[http://adc6160699.us.oracle.com:16200/cs/idcplg?IdcService=SES_CRAWLER_STATUS&IsJava=1&source=default&StatusFeed=]]></errorFileLocation> <feedType>controlFeed</feedType> <sourceName>default</sourceName> <securityType>attributeBased</securityType> <securityAttribute name="Account" grant="true"/> <securityAttribute name="DocSecurityGroup" grant="true"/> <securityAttribute name="Collab" grant="true"/> </rsscrawler> Make sure Account and DocSecurityGroup values are true. SES Configuration Let’s start by configuring the Identity Plug-ins in SES. Go to Global Settings -> System -> Identity Management Setup. Select Oracle Content Server and click the Activate button. We’ll populate the following values: HTTP endpoint for authentication: URL to WebCenter Content. Notice that /cs/idcplg was added at the end of the URL. Admin User: UCM Admin user. This user must have access to all CPOE content. Password: Password to Admin user. Authentication Type: NATIVE. Go back to the Home tab and click on Sources on the top left. Select Oracle Content Server on the right and click the Create button. Configuration URL: URL that point to the configuration file. Example: http://<ucm_hostname>:<port>/cs/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONFIG&source=default. User ID: UCM Admin user. Password: Password to Admin user. Click on the Authorization tab and add the appropriate values to the fields below. Make sure you see the ACCOUNT and DOCSECURITYGROUP security attributes at the end of the page. HTTP endpoint for authorization: http://<ucm_hostname>:<port>/cs/idcplg. Display URL prefix: http://<ucm_hostname>:<port>/cs. Administrator user: UCM Admin user. Administrator password. On the Document Types tab, add the documents that should be indexed by SES. As our last step, we’ll configure the Federation Trusted Entities under Global Settings. Entity Name: The user must be present in both the identity management server configured for your WebCenter application and the identity management server configured for Oracle SES. For instance, I used weblogic in my sample. Password: Entity user password.\ Now you are ready to test the integration on the SES UI: http://<ses hostname>:<port>/search/query/.

Read the article

Seizing the Moment with Mobility

- by Divya Malik

Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog. Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

Read the article

My Feelings About Microsoft Surface

- by Valter Minute

Advice: read the title carefully, I’m talking about “feelings” and not about advanced technical points proved in a scientific and objective way I still haven’t had a chance to play with a MS Surface tablet (I would love to, of course) and so my ideas just came from reading different articles on the net and MS official statements. Remember also that the MVP motto begins with “Independent” (“Independent Experts. Real World Answers.”) and this is just my humble opinion about a product and a technology. I know that, being an MS MVP you can be called an “MS-fanboy”, I don’t care, I hope that people can appreciate my opinion, even if it doesn’t match theirs. The “Surface” brand can be confusing for techies that knew the “original” surface concept but I think that will be a fresh new brand name for most of the people out there. But marketing department are here to confuse people… so I can understand this “recycle” of an existing name. So Microsoft is entering the hardware arena… for me this is good news. Microsoft developed some nice hardware in the past: the xbox, zune (even if the commercial success was quite limited) and, last but not least, the two arc mices (old and new model) that I use and appreciate. In the past Microsoft worked with OEMs and that model lead to good and bad things. Good thing (for microsoft, at least) is market domination by windows-based PCs that only in the last years has been reduced by the return of the Mac and tablets. Google is also moving in the hardware business with its acquisition of Motorola, and Apple leveraged his control of both the hardware and software sides to develop innovative products. Microsoft can scare OEMs and make them fly away from windows (but where?) or just lead the pack, showing how devices should be designed to compete in the market and bring back some of the innovation that disappeared from recent PC products (look at the shelves of your favorite electronics store and try to distinguish a laptop between the huge mass of anonymous PCs on displays… only Macs shine out there…). Having to compete with MS “official” hardware will force OEMs to develop better product and bring back some real competition in a market that was ruled only by prices (the lower the better even when that means low quality) and no innovative features at all (when it was the last time that a new PC surprised you?). Moving into a new market is a big and risky move, but with Windows 8 Microsoft is playing a crucial move for its future, trying to be back in the innovation run against apple and google. MS can’t afford to fail this time. I saw the new devices (the WinRT and Pro) and the specifications are scarce, misleading and confusing. The first impression is that the device looks like an iPad with a nice keyboard cover… Using “HD” and “full HD” to define display resolution instead of using the real figures and reviving the “ClearType” brand (now dead on Win8 as reported here and missed by people who hate to read text on displays, like myself) without providing clear figures (couldn’t you count those damned pixels?) seems to imply that MS was caught by surprise by apple recent “retina” displays that brought very high definition screens on tablets.Also there are no specifications about the processors used (even if some sources report NVidia Tegra for the ARM tablet and i5 for the x86 one) and expected battery life (a critical point for tablets and the point that killed Windows7 x86 based tablets). Also nothing about the price, and this will be another critical point because other platform out there already provide lots of applications and have a good user base, if MS want to enter this market tablets pricing must be competitive. There are some expansion ports (SD and USB), so no fixed storage model (even if the specs talks about 32-64GB for RT and 128-256GB for pro). I like this and don’t like the apple model where flash memory (that it’s dirt cheap used in thumdrives or SD cards) is as expensive as gold (or cocaine to have a more accurate per gram measurement) when mounted inside a tablet/phone. For big files you’ll be able to use external media and an SD card could be used to store files that don’t require super-fast SSD-like access times, I hope. To be honest I really don’t like the marketplace model and the limitation of Windows RT APIs (no local database? from a company that based a good share of its success on VB6+Access!) and lack of desktop support on the ARM (even if the support is here and has been used to port office). It’s a step toward the consumer market (where competitors are making big money), but may impact enterprise (and embedded) users that may not appreciate Windows 8 new UI or the limitations of the new app model (if you aren’t connected you are dead ). Not having compatibility with the desktop will require brand new applications and honestly made all the CPU cycles spent to convert .NET IL into real machine code in the past like a huge waste of time… as soon as a new processor architecture is supported by Windows you still have to rewrite part of your application (and MS is pushing HTML5+JS and native code more than .NET in my perception). On the other side I believe that the development experience provided by Visual Studio is still miles (or kilometres) ahead of the competition and even the all-uppercase menu of VS2012 hasn’t changed this situation. The new metro UI got mixed reviews. On my side I should say that is very pleasant to use on a touch screen, I like the minimalist design (even if sometimes is too minimal and hides stuff that, in my opinion, should be visible) but I should also say that using it with mouse and keyboard is like trying to pick your nose with boxing gloves… Metro is also very interesting for embedded devices where touch screen usage is quite common and where having an application taking all the screen is the norm. For devices like kiosks, vending machines etc. this kind of UI can be a great selling point. I don’t need a new tablet (to be honest I’m pretty happy with my wife’s iPad and with my PC), but I may change my opinion after having a chance to play a little bit with those new devices and understand what’s hidden under all this mysterious and generic announcements and specifications!

Read the article

Building a plug-in for Windows Live Writer

- by mbcrump

This tutorial will show you how to build a plug-in for Windows Live Writer. Windows Live Writer is a blogging tool that Microsoft provides for free. It includes an open API for .NET developers to create custom plug-ins. In this tutorial, I will show you how easy it is to build one. Open VS2008 or VS2010 and create a new project. Set the target framework to 2.0, Application Type to Class Library and give it a name. In this tutorial, we are going to create a plug-in that generates a twitter message with your blog post name and a TinyUrl link to the blog post. It will do all of this automatically after you publish your post. Once, we have a new projected created. We need to setup the references. Add a reference to the WindowsLive.Writer.Api.dll located in the C:\Program Files (x86)\Windows Live\Writer\ folder, if you are using X64 version of Windows. You will also need to add a reference to System.Windows.Forms System.Web from the .NET tab as well. Once that is complete, add your “using” statements so that it looks like whats shown below: Live Writer Plug-In "Using" using System; using System.Collections.Generic; using System.Text; using WindowsLive.Writer.Api; using System.Web; Now, we are going to setup some build events to make it easier to test our custom class. Go into the Properties of your project and select Build Events, click edit the Post-build and copy/paste the following line: XCOPY /D /Y /R "$(TargetPath)" "C:\Program Files (x86)\Windows Live\Writer\Plugins\" Your screen should look like the one pictured below: Next, we are going to launch an external program on debug. Click the debug tab and enter C:\Program Files (x86)\Windows Live\Writer\WindowsLiveWriter.exe Your screen should look like the one pictured below: Now we have a blank project and we need to add some code. We start with adding the attributes for the Live Writer Plugin. Before we get started creating the Attributes, we need to create a GUID. This GUID will uniquely identity our plug-in. So, to create a GUID follow the steps in VS2008/2010. Click Tools from the VS Menu ->Create GUID It will generate a GUID like the one listed below: GUID <Guid("56ED8A2C-F216-420D-91A1-F7541495DBDA")> We only want what’s inside the quotes, so your final product should be: "56ED8A2C-F216-420D-91A1-F7541495DBDA". Go ahead and paste this snipped into your class just above the public class. Live Writer Plug-In Attributes [WriterPlugin("56ED8A2C-F216-420D-91A1-F7541495DBDA", "Generate Twitter Message", Description = "After your new post has been published, this plug-in will attempt to generate a Twitter status messsage with the Title and TinyUrl link.", HasEditableOptions = false, Name = "Generate Twitter Message", PublisherUrl = "http://michaelcrump.net")] [InsertableContentSource("Generate Twitter Message")] So far, it should look like the following: Next, we need to implement the PublishNotifcationHook class and override the OnPostPublish. I’m not going to dive into what the code is doing as you should be able to follow pretty easily. The code below is the entire code used in the project. PublishNotificationHook public class Class1 : PublishNotificationHook { public override void OnPostPublish(System.Windows.Forms.IWin32Window dialogOwner, IProperties properties, IPublishingContext publishingContext, bool publish) { if (!publish) return; if (string.IsNullOrEmpty(publishingContext.PostInfo.Permalink)) { PluginDiagnostics.LogError("Live Tweet didn't execute, due to blank permalink"); } else { var strBlogName = HttpUtility.UrlEncode("#blogged : " + publishingContext.PostInfo.Title); //Blog Post Title var strUrlFinal = getTinyUrl(publishingContext.PostInfo.Permalink); //Blog Permalink URL Converted to TinyURL System.Diagnostics.Process.Start("http://twitter.com/home?status=" + strBlogName + strUrlFinal); } } We are going to go ahead and create a method to create the short url (tinyurl). TinyURL Helper Method private static string getTinyUrl(string url) { var cmpUrl = System.Globalization.CultureInfo.InvariantCulture.CompareInfo; if (!cmpUrl.IsPrefix(url, "http://tinyurl.com")) { var address = "http://tinyurl.com/api-create.php?url=" + url; var client = new System.Net.WebClient(); return (client.DownloadString(address)); } return (url); } Go ahead and build your project, it should have copied the .DLL into the Windows Live Writer Plugin Directory. If it did not, then you will want to check your configuration. Once that is complete, open Windows Live Writer and select Tools-> Options-> Plug-ins and enable your plug-in that you just created. Your screen should look like the one pictured below: Go ahead and click OK and publish your blog post. You should get a pop-up with the following: Hit OK and It should open a Twitter and either ask for a login or fill in your status as shown below: That should do it, you can do so many other things with the API. I suggest that if you want to build something really useful consult the MSDN pages. This plug-in that I created was perfect for what I needed and I hope someone finds it useful.

Read the article

useFastClick in JQuery Mobile

- by Yousef_Jadallah

Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} For who want to convert the application from JQM Alpha to JQM Beta 1, needs to bind click events to the new vclick one. Click event is working in general browsers butt that is needed for iOS and Android, useFastClick is (touch + mouse click). Moreover if you have this event alot in your project you can turn useFastClick off in mobileinit event: $(document).bind("mobileinit", function () { $.mobile.useFastClick = false; }); vclick event is needed to support touch events to make the page changes to happen faster, and to perform the URL hiding. So you need to change something like this $('btnShow').live("click", function (evt) { To : $('btnShow').live("vclick", function (evt) { For more information : http://jquerymobile.com/test/docs/api/globalconfig.html Here you can find full example in this case : <!DOCTYPE ><html xmlns="http://www.w3.org/1999/xhtml"><head> <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0b1/jquery.mobile-1.0b1.min.css" /> <script src="http://code.jquery.com/jquery-1.6.1.min.js"></script> <script src="http://code.jquery.com/mobile/1.0b1/jquery.mobile-1.0b1.min.js"></script> <script type="text/javascript"> //Here you need to use vclick instead of click event $('ul[id="MylistView"] a').live("vclick", function (evt) { alert('list click'); }); </script> <title></title></head><body> <div id="FirstPage" data-role="page" data-theme="b"> <div data-role="header"> <h1> Page Title</h1> </div> <div data-role="content"> <ul id="MylistView" data-role="listview" data-theme="g"> <li><a href="#SecondPage">Acura</a></li> <li><a href="#SecondPage">Audi</a></li> <li><a href="#SecondPage">BMW</a></li> </ul> </div> <div data-role="footer"> <h4> Page Footer</h4> </div> </div> <div id="SecondPage" data-role="page" data-theme="b" > <div data-role="header" > <h1> Page Title</h1> </div> Second Page <div data-role="footer"> <h4> Page Footer</h4> </div> </div></body></html> Hope that helps.

Read the article

7-Eleven Improves the Digital Guest Experience With 10-Minute Application Provisioning

- by MichaelM-Oracle

By Vishal Mehra - Director, Cloud Computing, Oracle Consulting Making the Cloud Journey Matter There’s much more to cloud computing than cutting costs and closing data centers. In fact, cloud computing is fast becoming the engine for innovation and productivity in the digital age. Oracle Consulting Services contributes to our customers’ cloud journey by accelerating application provisioning and rapidly deploying enterprise solutions. By blending flexibility with standardization, our Middleware as a Service (MWaaS) offering is ensuring the success of many cloud initiatives. 10-Minute Application Provisioning Times at 7-Eleven As a case in point, 7-Eleven recently highlighted the scope, scale, and results of a cloud-powered environment. The world’s largest convenience store chain is rolling out a Digital Guest Experience (DGE) program across 8,500 stores in the U.S. and Canada. Everyday, 7-Eleven connects with tens of millions of customers through point-of-sale terminals, web sites, and mobile apps. Promoting customer loyalty, targeting promotions, downloading digital coupons, and accepting digital payments are all part of the roadmap for a comprehensive and rewarding customer experience. And what about the time required for deploying successive versions of this mission-critical solution? Ron Clanton, 7-Eleven's DGE Program Manager, Information Technology reported at Oracle Open World, " We are now able to provision new environments in less than 10 minutes. This includes the complete SOA Suite on Exalogic, and Enterprise Manager managing both the SOA Suite, Exalogic, and our Exadata databases ." OCS understands the complex nature of innovative solutions and has processes and expertise to help clients like 7-Eleven rapidly develop technology that enhances the customer experience with little more than the click of a button. OCS understood that the 7-Eleven roadmap required careful planning, agile development, and a cloud-capable environment to move fast and perform at enterprise scale. Business Agility Today’s business-savvy technology leaders face competing priorities as they confront the digital disruptions of the mobile revolution and next-generation enterprise applications. To support an innovation agenda, IT is required to balance competing priorities between development and operations groups. Standardization and consolidation of computing resources are the keys to success. With our operational and technical expertise promoting business agility, Oracle Consulting's deep Middleware as a Service experience can make a significant difference to our clients by empowering enterprise IT organizations with the computing environment they seek to keep up with the pace of change that digitally driven business units expect. Depending on the needs of the organization, this environment runs within a private, public, or hybrid cloud infrastructure. Through on-demand access to a shared pool of configurable computing resources, IT delivers the standard tools and methods for developing, integrating, deploying, and scaling next-generation applications. Gold profiles of predefined configurations eliminate the version mismatches among databases, application servers, and SOA suite components, delivered both by Oracle and other enterprise ISVs. These computing resources are well defined in business terms, enabling users to select what they need from a service catalog. Striking the Balance between Development and Operations As a result, development groups have the flexibility to choose among a menu of available services with descriptions of standard business functions, service level guarantees, and costs. Faced with the consumerization of enterprise IT, they can deliver the innovative customer experiences that seamlessly integrate with underlying enterprise applications and services. This cloud-powered development and testing environment accelerates release cycles to ensure agile development and rapid deployments. At the same time, the operations group is relying on certified stacks and frameworks, tuned to predefined environments and patterns. Operators can maintain a high level of security, and continue best practices for applications/systems monitoring and management. Moreover, faced with the challenges of delivering on service level agreements (SLAs) with the business units, operators can ensure performance, scalability, and reliability of the infrastructure. The elasticity of a cloud-computing environment – the ability to rapidly add virtual machines and storage in response to computing demands -- makes a difference for hardware utilization and efficiency. Contending with Continuous Change What does it take to succeed on the promise of the cloud? As the engine for innovation and productivity in the digital age, IT must face not only the technical transformations but also the organizational challenges of the cloud. Standardizing key technologies, resources, and services through cloud computing is only one part of the cloud journey. Managing relationships among multiple department and projects over time – developing the management, governance, and monitoring capabilities within IT – is an often unmentioned but all too important second part. In fact, IT must have the organizational agility to contend with continuous change. This is where a skilled consulting services partner can play a pivotal role as a trusted advisor in the successful adoption of cloud solutions. With a lifecycle services approach to delivering innovative business solutions, Oracle Consulting Services has expertise and a portfolio of services to help enterprise customers succeed on their cloud journeys as well as other converging mega trends .

Read the article

Web Services Example - Part 2: Programmatic

- by Denis T

In this edition of the ADF Mobile blog we'll tackle part 2 of our Web Service examples. In this posting we'll take a look at using a SOAP Web Service but calling it programmatically in code and parsing the return into a bean. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Note: This is a different workspace than WS-Part1 Defining our Web Service: Just like our first installment, we are using the same public weather forecast web service provided free by CDYNE Corporation. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. We're going to concentrate on the same two web service methods, GetCityForecastByZIP and GetWeatherInformation. Defing the Application: The application setup is identical to the Weather1 version. There are some improvements to the data that is displayed as part of this example though. Now we are able to show the associated image along with each forecast line when using the Forecast By Zip feature. We've also added the temperature Hi/Low values into the UI. Summary of Fundamental Changes In This Application The most fundamental change is that we're binding the UI to the Bean Data Controls instead of directly to the Web Service Data Controls. This gives us much more flexibility to control the shape of the data and allows us to do caching of the data outside of the Web Service. This way if your application is, say offline, your bean could still populate with data from a local cache and still show you some UI as opposed to completely failing because you don't have any connectivity. In general we promote this type of programming technique with ADF Mobile to insulate your application from any issues with network connectivity. What's different with this example? We have setup the Web Service DC the same way but now we have managed beans to process the data. The following classes define the "Model" of our application: CityInformation-CityForecast-Forecast, WeatherInformation-WeatherDescription. We use WeatherBean for UI interaction to the model layer. If you look through this example, we don't really do that much with the java code except use it to grab the image URL from the weather description. In a more realistic example, you might be using some JDBC classes to persist the data to a local database. To have a good architecture it is always good to keep your model and UI layers separate. This gets muddied if you start to use bindings on a page invoked from Java code and this java code starts to become your "model" layer. Since bindings are page specific, your model layer starts to become entwined with your UI. Not good! To help with this, we've added some utility functions that let you invoke DC methods without having a binding and thus execute methods from your "model" layer without requiring a binding in your page definition. We do this with the invokeDataControlMethod of the AdfmfJavaUtilities class. An example of this method call is available in line 95 of WeatherInformation.java and line 93 of CityInformation.Java. What's a GenericType? Because Web Service Data Controls (and also URL Data Controls AKA REST) use generic name/value pairs to define their structure and don't have strongly typed objects, these are actually stored internally as GenericType objects. The GenericType class is simply a property map of name/value pairs that can be hierarchical. There are methods like getAttribute where you supply the index of the attribute or it's string property name. Why is this important to know? Because invokeDataControlMethod returns GenericType objects and developers either need to parse these GenericType objects themselves or use one of our helper functions. GenericTypeBeanSerializationHelper This class does exactly what it's name implies. It's a helper class for developers to aid in serialization of GenericTypes to/from java objects. This is extremely handy if you have a large GenericType object with many attributes (or you're just lazy like me!) and you just want to parse it out into a real java object you can use more easily. Here you would use the fromGenericType method. This method takes the class of the Java object you wish to return and the GenericType as parameters. The method then parses through each attribute in the GenericType and uses reflection to set that same attribute in the Java class. Then the method returns that new object of the class you specified. This is obviously very handy to avoid a lot of shuffling code between GenericType and your own Java classes. The reverse method, toGenericType is also available when you want to go the other way. In this case you supply the string that represents the package location in the DataControl definition (Example: "MyDC.myParams.MyCollection") and then pass in the Java object you have that holds the data and a GenericType is returned to you. Again, it will use reflection to calculate the attributes that match between the java class and the GenericType and call the getters/setters on those. Issues and Possible Improvements: In the next installment we'll show you how to make your web service calls asynchronously so your UI will fill dynamically when the service call returns but in the meantime you show the data you have locally in your bean fed from some local cache. This gives your users instant delivery of some data while you fetch other data in the background.

Read the article

Sass interface in HTML6 for upload files.

- by Anirudha

Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/04/sass-interface-in-html6-for-upload-files.aspx[This post is about experiment & imagination] From Windows XP (ever last OS I tried) I have seen a feature that is about send file to pen drive and make shortcut on Desktop. In XP, Win7 (Win8 have this too, not removed) just select the file right click > send to and you can send this file to many places. In my menu it’s show me Skype because I have installed it. this skype confirm that we can add our own app here to make it more easy for user to send file in our app. Nowadays Many people use Cloud or online site to store the file. In case of html5 drag and drop you need to have site opened and have opened that page which is about file upload. You need to select all and drag and drop. after drag and drop file is simply uploaded to server and site show you on list (if no error happen). but this file upload is seriously not worthy since I have to open the site when I do this operation. Through this post I want to describe a feature that can make this thing better. This API is simply called SASS FILE UPLOAD API Through This API when you surf the site and come into file upload page then the page will tell you that we also have SASS FILE API support. Enable it for better result. How this work This API feature are activated on 2 basis. 1. Feature are disabled by default on site (or you can change it if it’s not) 2. This API allow specific site to upload the files. Files upload may have some rule. For example (minimum or maximum size of file to uploaded, which format the site allowed you to upload). In case of resume site you will be allowed to use .doc (according to code of site) How browser recognize that Site have SASS service. In HTML source of the site, the code have a meta tag similar to this <meta name=”sass-upload-api” path=”/upload.json”/> Remember that upload.json is one file that has define the value of many settings { "cookie_name": "ck_file", "maximum_allowed_perday": 24, "allowed_file_extensions","*.png,*.jpg,*.jpeg,*.gif", "method": [ { "get": "file/get", "routing":"/file/get/{fileName}" }, { "post": "file/post", "routing":"/file/post/{fileName}" }, { "delete": "file/delete", "routing":"/file/delete/{fileName}" }, { "put": "file/put", "routing":"/file/put/{fileName}" }, { "all": "file/all", "routing":"/file/all/{fileName}" } ] } cookie name is simply a cookie which should be stored in browser and define in json. we define the cookie_name so we can easily share then with service in Windows system. This cookie will be accessible with the service so it’s security based safe. other cookie will not be shared. The cookie will be post,put, get from this location. The all location will be simply about showing a whole list of file. This will gave a treeview kind of json to show the directories on sever. for example example.com if you have activated the API with this site then you will seen a send to option in your explorer.exe when you send you will got a windows open which folder you want to use to send the file. The windows will also describe the limit and how much you can upload. This thing never required site to opened. When you upload the file this will be uploaded through FTP protocol. FTP protocol are better for performance. How this API make thing faster. Suppose you want to ask a question and want to post image. you just do it and get it ready when you open stackoverflow.com now stackoverflow will only tell you which file you want to put on your current question that you asking for. second use is about people use cloud app. There is no need of drag and drop anymore. we just need to do it without drag and drop it. we doesn’t need to open the site either. This thing is still in experiment level. I will update this post when I got some progress on this API.

Read the article

Silverlight Reporting Application Part 3.5 - Prism Background and WCF RIA [Series Intermission]

Taking a step back before I dive into the details and full-on coding fun, I wanted to once again respond to a comment on my last post to clear up some things in regards to how I'm setting up my project and some of the choices I've made. Aka, thanks Ben. :) Prism Project Setup For starters, I'm not the ideal use case for a Prism application. In most cases where you've got a one-man team, Prism can be overkill as it is more intended for large teams who are geographically dispersed or in applications that have a larger scale than my Recruiting application in which you'll greatly benefit from modularity, delayed loading of xaps, etc. What Prism offers, though, is a manner for handling UI, commands, and events with the idea that, through a modular approach in which no parts really need to know about one another, I can update this application bit by bit as hiring needs change or requirements differ between offices without having to worry that changing something in the Jobs module will break something in, say, the Scheduling module. All that being said, here's a look at how our project breakdown for Recruit (MVVM/Prism implementation) looks: This could be a little misleading though, as each of those modules is actually another project in the overall Recruit solution. As far as what the projects actually are, that looks a bit like this: Recruiting Solution Recruit (Shell up there) - Main Silverlight Application .Web - Default .Web application to host the Silverlight app Infrastructure - Silverlight Class Library Project Modules - Silverlight Class Library Projects Infrastructure &Modules The Infrastructure project is probably something you'll see to some degree in any composite application. In this application, it is going to contain custom commands (you'll see the joy of these in a post or two down the road), events, helper classes, and any custom classes I need to share between different modules. Think of this as a handy little crossroad between any parts of your application. Modules on the other hand are the bread and butter of this application. Besides the shell, which holds the UI skeleton, and the infrastructure, which holds all those shared goodies, the modules are self-contained bundles of functionality to handle different concerns. In my scenario, I need a way to look up and edit Jobs, Applicants, and Schedule interviews, a Notification module to handle telling the user when different things are happening (i.e., loading from database), and a Menu to control interaction and moving between different views. All modules are going to follow the following pattern: The module class will inherit from IModule and handle initialization and loading the correct view into the correct region, whereas the Views and ViewModels folders will contain paired Silverlight user controls and ViewModel class backings. WCF RIA Services Since we've got all the projects in a single solution, we did not have to go the route of creating a WCR RIA Services Class Library. Every module has it's WCF RIA link back to the main .Web project, so the single Linq-2-SQL (yes, I said Linq-2-SQL, but I'll soon be switching to OpenAccess due to the new visual designer) context I'm using there works nicely with the scope of my project. If I were going for completely separating this project out and doing different, dynamically loaded elements, I'd probably go for the separate class library. Hope that clears that up. In the future though, I will be using that in a project that I've got in the "when I've got enough time to work on this" pipeline, so we'll get into that eventually- and hopefully when WCF RIA is in full release! Why Not use Silverlight Navigation/Business Template? The short answer- I'm a creature of habit, and having used Silverlight for a few years now, I'm used to doing lots of things manually. :) Plus, starting with a blank slate of a project I'm able to set up things exactly as I want them to be. In this case, rather than the navigation frame we would see in one of the templates, the MainRegion/ContentControl is working as our main navigation window. In many cases I will use theSilverlight navigation template to start things off, however in this case I did not need those features so I opted out of using that. Next time when I actually hit post #4, we're going to get into the modules and starting to get functionality into this application. Next week is also release week for the Q1 2010 release, so be sure to check out our annualWebinar Week (I might be biased, but Wednesday is my favorite out of the group). Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Stumbling Through: Visual Studio 2010 (Part II)

I would now like to expand a little on what I stumbled through in part I of my Visual Studio 2010 post and touch on a few other features of VS 2010. Specifically, I want to generate some code based off of an Entity Framework model and tie it up to an actual data source. Im not going to take the easy way and tie to a SQL Server data source, though, I will tie it to an XML data file instead. Why? Well, why not? This is purely for learning, there are probably much better ways to get strongly-typed classes around XML but it will force us to go down a path less travelled and maybe learn a few things along the way. Once we get this XML data and the means to interact with it, I will revisit data binding to this data in a WPF form and see if I cant get reading, adding, deleting, and updating working smoothly with minimal code. To begin, I will use what was learned in the first part of this blog topic and draw out a data model for the MFL (My Football League) - I dont want the NFL to come down and sue me for using their name in this totally football-related article. The data model looks as follows, with Teams having Players, and Players having a position and statistics for each season they played: Note that when making the associations between these entities, I was given the option to create the foreign key but I only chose to select this option for the association between Player and Position. The reason for this is that I am picturing the XML that will contain this data to look somewhat like this: <MFL> <Position/> <Position/> <Position/> <Team> <Player> <Statistic/> </Player> </Team> </MFL> Statistic will be under its associated Player node, and Player will be under its associated Team node no need to have an Id to reference it if we know it will always fall under its parent. Position, however, is more of a lookup value that will not have any hierarchical relationship to the player. In fact, the Position data itself may be in a completely different xml file (something Id like to play around with), so in any case, a player will need to reference the position by its Id. So now that we have a simple data model laid out, I would like to generate two things based on it: A class for each entity with properties corresponding to each entity property An IO class with methods to get data for each entity, either all instances, by Id or by parent. Now my experience with code generation in the past has consisted of writing up little apps that use the code dom directly to regenerate code on demand (or using tools like CodeSmith). Surely, there has got to be a more fun way to do this given that we are using the Entity Framework which already has built-in code generation for SQL Server support. Lets start with that built-in stuff to give us a base to work off of. Right click anywhere in the canvas of our model and select Add Code Generation Item: So just adding that code item seemed to do quite a bit towards what I was intending: It apparently generated a class for each entity, but also a whole ton more. I mean a TON more. Way too much complicated code was generated now that code is likely to be a black box anyway so it shouldnt matter, but we need to understand how to make this work the way we want it to work, so lets get ready to do some stumbling through that text template (tt) file. When I open the .tt file that was generated, right off the bat I realize there is going to be trouble there is no color coding, no intellisense no nothing! That is going to make stumbling through more like groping blindly in the dark while handcuffed and hopping on one foot, which was one of the alternate titles I was considering for this blog. Thankfully, the community comes to my rescue and I wont have to cast my mind back to the glory days of coding in VI (look it up, kids). Using the Extension Manager (Available under the Tools menu), I did a quick search for tt editor in the Online Gallery and quickly found the Tangible T4 Editor: Downloading and installing this was a breeze, and after doing so I got some color coding and intellisense while editing the tt files. If you will be doing any customizing of tt files, I highly recommend installing this extension. Next, well see if that is enough help for us to tweak that tt file to do the kind of code generation that we wantDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Why bother writing an Windows 8 app?

- by Dennis Vroegop

So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

Read the article

NDepend Evaluation: Part 3

- by Anthony Trudeau

NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high code quality. NDepend uses a number of metrics and aggregates the data in pleasing static and active visual reports. My evaluation of NDepend will be broken up into several different parts. In the first part of the evaluation I looked at installing the add-in. And in the last part I went over my first impressions including an overview of the features. In this installment I provide a little more detail on a few of the features that I really like. Dependency Matrix The dependency matrix is one of the rich visual components provided with NDepend. At a glance it lets you know where you have coupling problems including cycles. It does this with number indicating the weight of the dependency and a color-coding that indicates the nature of the dependency. Green and blue cells are direct dependencies (with the difference being whether the relationship is from row-to-column or column-to-row). Black cells are the ones that you really want to know about. These indicate that you have a cycle. That is, type A refers to type B and type B also refers to Type A. But, that’s not the end of the story. A handy pop-up appears when you hover over the cell in question. It explains the color, the dependency, and provides several interesting links that will teach you more than you want to know about the dependency. You can double-click the problem cells to explode the dependency. That will show the dependencies on a method-by-method basis allowing you to more easily target and fix the problem. When you’re done you can click the back button on the toolbar. Dependency Graph The dependency graph is another component provided. It’s complementary to the dependency matrix, but it isn’t as easy to identify dependency issues using the window. On a positive note, it does provide more information than the matrix. My biggest issue with the dependency graph is determining what is shown. This was not readily obvious. I ended up using the navigation buttons to get an acceptable view. I would have liked to choose what I see. Once you see the types you want you can get a decent idea of coupling strength based on the width of the dependency lines. Double-arrowed lines are problematic and are shown in red. The size of the boxes will be related to the metric being displayed. This is controlled using the Box Size drop-down in the toolbar. Personally, I don’t find the size of the box to be helpful, so I change it to Constant Font. One nice thing about the display is that you can see the entire path of dependencies when you hover over a type. This is done by color-coding the dependencies and dependants. It would be nice if selecting the box for the type would lock the highlighting in place. I did find a perhaps unintended work-around to the color-coding. You can lock the color-coding in by hovering over the type, right-clicking, and then clicking on the canvas area to clear the pop-up menu. You can then do whatever with it including saving it to an image file with the color-coding. CQL NDepend uses a code query language (CQL) to work with your code just like it was a database. CQL cannot be confused with the robustness of T-SQL or even LINQ, but it represents an impressive attempt at providing an expressive way to enumerate and interrogate your code. There are two main windows you’ll use when working with CQL. The CQL Query Explorer allows you to define what queries (rules) are run as part of a report – I immediately unselected rules that I don’t want in my results. The CQL Query Edit window is where you can view or author your own rules. The explorer window is pretty self-explanatory, so I won’t mention it further other than to say that any queries you author will appear in the custom group. Authoring your own queries is really hard to screw-up. The Intellisense-like pop-ups tell you what you can do while making composition easy. I was able to create a query within two minutes of playing with the editor. My query warns if any types that are interfaces don’t start with an “I”. WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” The results from the CQL Query Edit window are immediate. That fact makes it useful for ad hoc querying. It’s worth mentioning two things that could make the experience smoother. First, out of habit from using Visual Studio I expect to be able to scroll and press Tab to select an item in the list (like Intellisense). You have to press Enter when you scroll to the item you want. Second, the commands are case-sensitive. I don’t see a really good reason to enforce that. CQL has a lot of potential not just in enforcing code quality, but also enforcing architectural constraints that your enterprise has defined. Up Next My next update will be the final part of the evaluation. I will summarize my experience and provide my conclusions on the NDepend add-in. ** View Part 1 of the Evaluation ** ** View Part 2 of the Evaluation ** Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend.

Read the article

Synergy - easy share of keyboard and mouse between multiple computers

Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

Read the article

Yes, I did it - Skydiving in Mauritius

Finally, I did it or better said we did it. Already back in November last year I saw the big billboard advertisement of Skydive Austral Mauritius near Caudan Waterfront in Port Louis and decided for myself that this is going to be the perfect birthday gift for my wife. Simply out of curiosity I would join her tandem jump with a second instructor. Due to her pregnancy of our son I had to be patient... But then finally, her birthday had arrived and on our midnight celebration session I showed her her netbook with the website preloaded. Actually, it was the "perfect" timing... Recovery from her cesarean is fine, local weather conditions are gorgious and the children were under surveillance of my mum - spending her annual holidays on the island. So, after late wake-up in the morning, we packed our stuff and off we went. According to Google Maps direction indication we had to drive for roughly 50km (only) but traffic here in Mauritius is always challenging. The dropzone is at the Zone Industrielle Mon Loisir Sugar Estate near Riviere du Rempart at the northern east coast. Anyways, we were not in a hurry and arrived there shortly after noon. The access road to the airfield are just small down-driven paths through sugar cane fields and according to our daughter "it's bumpy!". True true true... The facilities at Skydive Austral Mauritius are complete except for food. Enough space for parking, easy handling at the reception and a lot to see for the kids. There's even a big terrace with several sets of tables and chairs, small bar for soft drinks, strictly non-alcoholic. The team over there is all welcoming and warm-hearthy! Having the kids with us was no issue at all. Quite the opposite, our daugther was allowed to discover a lot of things than we adults did. Even visiting the small air plane was on the menu for her. Really great stuff! While waiting for our turn we enjoyed watching other people getting ready in the jump gear, taking off with the Cessna, and finally coming back down on the tandem parachute. Actually, the different expressions on their faces was one of the best parts while waiting. Great mental preparation as my wife was getting more anxious about her first jump... {loadposition content_adsense} First, we got some information about the procedures on the plane about how to get seated, tight up with our instructors and how to get ready for the jump off the plane as soon as we arrive the height of 10.000 ft. All well explained and easy to understand after all.Next, we met with our jumpers Chris and Lee aka "Rasta" to get dressed and ready for take-off. Those guys are really cool and relaxed for their job. From that point on, the DVD session / recording for my wife's birthday started and we really had a lot of fun... The difference between that small Cessna and a commercial flight with an Airbus or a Boeing is astronomic! The climb up to 10.000 ft took us roughly 25 minutes and we enjoyed the magnificent view over the turquoise lagunes near Poste de Flacq, Lafayette and Isle d'Ambre on the north-east coast. After flying through the clouds we sun-bathed and looked over "iced-sugar covered" Mauritius. You might have a look at the picture gallery of Skydive Mauritius for better imagination. The moment of truth, or better said, point of no return came after approximately 25 minutes. The door opens, moving into position on the side on top of the wheel and... out! Back flip and free fall! Slight turns and Wooooohooooo! through the clouds... It so amazing and breath-taking! So undescribable! You have to experience this yourself! Some seconds later the parachute opened and we glided smoothly with some turns and spins back down to the dropzone. The rest of the family could hear and see us soon and the landing was easy going. We never had any doubts or fear about our instructors. They did a great job and we are looking forward to book our next job. I might even consider to follow educational classes on skydiving and earn a license. By the way, feel free to get in touch with Skydive Austral Mauritius. Either via contact details on their website or tweeting a little bit with them. Follow the tweets of Chris and fellows on SkydiveAustral.

Read the article

How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

- by Ibuntu

I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

Read the article

Are IE9 really good ?

- by anirudha

IE9 started a campaign for kill IE6 from the core because they know that IE6 is a big trouble or problem for them for promote 9 version of IE. so they started a campaign for killing IE6. next time they kill IE 7 , 8,9 whenever they found this old version have a big problem for them to promote next version of IE. Why they not make a update system who automatically update the browser and tell user to restart and update goes installed in the user system. well IE9 should learn from all other that they have very well design auto-update system who never give user in trouble that your browser goes old. Chrome and Firefox both update themselves and say user restart to enjoy another good version. in IE6 a big problem is that updates. no one sure that they installed new version of IE6 without any hassles and update goes install without any problem because they really know or care about “you need this to install this and this for this” so they thing “why I update IE whenever I am unsure that my browser goes update and I have no problem again” so they do nothing because their work done with no problem because common person used high profile application who work even in IE6. so they do nothing. IE6 countdown website have designed a banner for warn or force user to upgrade to next version of IE. well there is no good reason for put the banner on website some of reason are:- Windows 7 comes with pre-installed IE8 and Vista comes with upgrade version them IE6 so that is sure that you force a user who have Windows XP [luna] and if they want to upgrade IE then they can get IE8 not version 9 because IE9 is design for Windows 7 or Vista Service pack 2. so What is the use of update when user still have a outdate version too because IE8 is old version and not have any capability of HTML5 so forcing user by using the banner have no sense. I am not know why they all listed on website put the banner on their own website. it’s good that you offer user what they want instead of giving them a outdate version of IE again. My means to give a user list of browser they can try to enhance their browser experience instead of only IE. IE9 build upon WPF and they spent more time on using WPF in IE instead of making user experience browser. many thing is designed wrongly in IE first thing is tabs. the tabs in chrome are bigger and easily to move and same in Firefox even not have smooth tabbing. IE have same tabbing as chrome have but leak a point that it’s too small. if you really want to move then sometime they create a problem that they going elsewhere from the current instance of IE. Chrome have a big buttons, tabs and menu to enhance browser experience and Firefox have a good feature that you can make them bigger or small. you can put the icon for add-ons on the toolbar for easily use but IE have no relation with customization so we never can thinking about that. When chrome provide lot’s of extensions and a webstore for browser application and same feature in Firefox can be seen then there is no plugin in IE. really you can see their IE addons Website where no plugin listed for web development. even in the category or tag. as a response from many blog there is new for developer that new version of IE9 developer tool. well IE9 have three new tabs a blogger tell on their blog. when I trying them I found many thing but I still unable to edit the Css from the HTML tab and no plugin I found I can get to enhance IE9 web development. something more other provide never IE9 give me like personas , customization , browser extension or any other they used to tell a small thing customization . IE9 still have some problem with JavaScript that when I use Firefox and chrome and logout in both then my cookie is deleted but in IE it’s not done. it’s show me that IE9 still have different from other not for good thing even some bad thing too. When I trying to read a article that is written in Hindi using Unicode font I found that they show many thing misspelled. there is three Sha in Hindi but they all goes wrong in IE. the misprint thing is not that the writing for the articles goes wrong. it’s problem or browser to rendering a font. the Firefox and chrome not give me this problem even opera render the font in italic style by decrease the font-size but all those work perfect. in Pwn2Own the apple’s safari and IE9 both are hacked. this is a awesome news for whose who thing that open-source is lose in Security and close-source is highly-secured software. well this is not a good parameter for talking about software. it’s should depend how much application tested and used. because more testing and more use of application make them better. I appreciate IE to making their new version 9 and good luck for them. there is a another matter that I personally found nothing on them.

Read the article

Windows 8 for productivity?

- by Charles Young

At long last I’ve started using Windows 8. I boot from a VHD on which I have installed Office, Visio, Visual Studio, SQL Server, etc. For a week, now, I’ve been happily writing code and documents and using Visio and PowerPoint. I am, very much, a ‘productivity’ user rather than a content consumer. I spend my days flitting between countless windows and browser tabs displayed across dual monitors. I need to access a lot of different functionality and information in as fluid a fashion as possible. With that in mind, and like so many others, I was worried about Windows 8. The Metro interface is primarily about content consumption on touch-enabled screens, and not really geared for people like me sitting in front of an 8-core non-touch laptop and an additional Samsung monitor. I still use a mouse, not my finger. And I create more than I consume. Clearly, Windows 8 won’t be viable for people like me unless Metro keeps out of my hair when using productivity and development tools. With this in mind, I had long expected Microsoft to provide some mechanism for switching Metro off. There was a registry hack in last year’s Developer Preview, but this capability has been removed. That’s brave. So, how have things worked out so far? Well, I am really quite surprised. When I played with the Developer Preview last year, it was clear that Metro was unfinished and didn’t play well enough with the desktop. Obviously I expected things to improve, but the context switching from desktop to full-screen seemed a heavy burden to place on users. That sense of abrupt change hasn’t entirely gone away (how could it), but after a few days, I can’t say that I find it burdensome or irritating. I’ve got used very quickly to ‘gesturing’ with my mouse at the bottom or top right corners of the screen to move between applications, using the Windows key to toggle the Start screen and generally finding my way around. I am surprised at how effective the Start screen is, given the rather basic grouping features it provides. Of course, I had to take control of it and sort things the way I want. If anything, though, the Start screen provides a better navigation and application launcher tool than the old Start menu. What I didn’t expect was the way that Metro enhances the productivity story. As I write this, I’ve got my desktop open with a maximised Word window. However, the desktop extends only across about 85% of the width of my screen. On the left hand side, I have a column that displays the new Metro email client. This is currently showing me a list of emails for my main work account. I can flip easily between different accounts and read my email within that same column. As I work on documents, I want to be able to monitor my inbox with a quick glance. The desktop, of course, has its own snap feature. I could run the desktop full screen and bring up Outlook and Word side by side. However, this doesn’t begin to approach the convenience of snapping the Metro email client. Consider that when I snap a window on the desktop, it initially takes up 50% of the screen. Outlook doesn’t really know anything about snap, and doesn’t adjust to make effective use of the limited screen estate. Even at 50% screen width, it is difficult to use, so forget about trying to use it in a Metro fashion. In any case, I am left with the prospect of having to manually adjust everything to view my email effectively alongside Word. Worse, there is nothing stopping another window from overlapping and obscuring my email. It becomes a struggle to keep sight of email as it arrives. Of course, there is always ‘toast’ to notify me when things arrive, but if Outlook is obscured, this just feels intrusive. The beauty of the Metro snap feature is that my email reader now exists outside of my desktop. The Metro app has been crafted to work well in the fixed width column as well as in full-screen. It cannot be obscured by overlapping windows. I still get notifications if I wish. More importantly, it is clear that careful attention has been given to how things work when moving between applications when ‘snapped’. If I decide, say to flick over to the Metro newsreader to catch up with current affairs, my desktop, rather than my email client, obligingly makes way for the reader. With a simple gesture and click, or alternatively by pressing Windows-Tab, my desktop reappears. Another pleasant surprise is the way Windows 8 handles dual monitors. It’s not just the fact that both screens now display the desktop task bar. It’s that I can so easily move between Metro and the desktop on either screen. I can only have Metro on one screen at a time which makes entire sense given the ‘full-screen’ nature of Metro apps. Using dual monitors feels smoother and easier than previous versions of Windows. Overall then, I’m enjoying the Windows 8 improvements. Strangely, for all the hype (“Windows reimagined”, etc.), my perception as a ‘productivity’ user is more one of evolution than revolution. It all feels very familiar, but just better.

Read the article

JDeveloper does not recognize existing subversion working directory

- by Bob Webster

Just a quick note about an issue where JDeveloper no longer recognized an existing subversion working directory. Symptom: JDeveloper Versioning menu offers to Version an Application that is already versioned in svn. Cause: The repository url contained in the hidden .svn folders of the working directory is no longer valid. Solution: Determine the correct url for the Subversion repository and update the .svn working directory.Fix the url contained in the svn folders of the working directory using the svn switch command. Example: In a shell change directory to the Application folder. Run the svn info command to confirm the current settings. $ svn info Path: . URL: http://192.168.1.128/repos/jdeveloperrepo/AsyncExamples/BPELCallAsync/trunk Repository Root: http://192.168.1.128/repos/jdeveloperrepo Repository UUID: 3dc5eb88-3001-0010-8d6e-fd6f73825647 Revision: 145 Node Kind: directory Schedule: normal Last Changed Rev: 145 Last Changed Date: 2012-06-07 07:15:56 -0700 (Thu, 07 Jun 2012) In this case, the IP address in the repository URL is incorrect, the svn server is located at 192.168.56.1 Note: The IP Address currently set is displayed after the Project Name in the Application Navigator. See the screen snapshot above. Run the svn switch command with the --relocate option Provide as much of the urls as necessary to correctly rewrite the url from current to new. For example, to change the repository server address from 192.168.1.128 to 192.168.56.1 $ svn switch --relocate http://192.168.1.128 http://192.168.56.1 . (Note the trailing period in the above command) When the url is correct, JDeveloper should recognize the Subversion Working Directory.

Read the article

Windows Phone 8 Launch Event Summary

- by Tim Murphy

Today was the official coming out party for Windows Phone 8. Below is a summary of the launch event. There is a lot here to stay with me. They started with a commercial staring Joe Belfiore show how his Windows Phone 8 was personal too him which highlights something I think Microsoft has done well over the last couple of event: spotlight how Windows Phone is a different experience from other smartphones. Joe actually called iPhone and Android “tired old metaphors" and explained that the idea around Windows Phone was to “reinvent the smartphone around you” as “the most personal smartphone operating system”. The is the message that they need to drive home in their adds. The only real technical aspect we found out was that they have optimized the operating system around the dual core Qualcomm Snapdragon chip set. It seems like all of the other hardware goodies had already been announced. The remainder of the event was centered around new features of the OS and app announcements. So what are we getting? The integrated features included lock screen live tile, Data Sense, Rooms and Kids corner. There wasn’t a lot of information about it, but Joe also talked about apps not just having live tiles, but being live apps that could integrate with wallet and the hub. The lock screen will now be able to be personalized with live tile data or even a photo slide show. This gives the lock screen an even better ability to give you the information you want to know before you even unlock the phone. The Kids Corner allows you as a parent to setup an area on your phone that you kids can go into an use it without disturbing your apps. They can play games or use apps that you have designated and will only see those apps. It even has a special lock screen gesture just for the kids corner. Rooms allow you to organize your phone around the groups of people in your life. You get a shared calendar, a room wall as well as shared notes beyond just being able to send messages to a group. You can also invite people not on the Windows Phone platform to access an online version of the room. Data Sense is a new feature that gives you better control and understanding of your data plan usage. You can see which applications are using data and it can automatically adjust they way your phone behaves as you get close to your data limit. Add to these features the fact that the entire Windows ecosystem is integrated with SkyDrive and you have an available anywhere experience that is unequaled by any other platform. Your document, photos and music are available on your Windows Phone, Window 8 device and Xbox. SkyDrive also doesn’t limit how long you can keep files like the competing cloud platforms and give more free storage. It was interesting the way they made the launch event more personal. First Joe brought out his own kids to demo the Kids Corner. They followed this up by bringing out Jessica Alba to discuss her experience on the Windows Phone 8. They need to keep putting a face on the product instead of just showing features as a cold list. Then we get to apps. We knew that the new Skype was coming, but we found out that it was created in such a way that it can receive calls without running consistently in the background which would eat up battery. This announcement was follow by the coming Facebook app that is optimized for Windows Phone 8. As a matter of fact they indicated that just after launch the marketplace would have 46 out of the top 50 apps used by all smartphone platforms. In a rational world this tide with over 120,000 apps currently in the marketplace there should be no more argument about the Windows Phone ecosystem. For those of us who develop for Windows Phone and weren’t on the early adoption program will finally get access to the SDK tomorrow after an announcement at Build (more waiting). Perhaps we will get a few new features then. In the end I wouldn’t say there were any huge surprises, but I am really excited about getting my hands on the devices next month and starting to develop. Stay tuned. del.icio.us Tags: Windows Phone,Windows Phone 8,Winodws Phone 8 Launch,Joe Belfiore,Jessica Alba

Read the article

Viewing the NetBeans Central Registry (Part 2)

- by Geertjan

Jens Hofschröer, who has one of the very best NetBeans Platform blogs (if you more or less understand German), and who wrote, sometime ago, the initial version of the Import Statement Organizer, as well as being the main developer of a great gear design & manufacturing tool on the NetBeans Platform in Aachen, commented on my recent blog entry "Viewing the NetBeans Central Registry", where the root Node of the Central Registry is shown in a BeanTreeView, with the words: "I wrapped that Node in a FilterNode to provide the 'position' attribute and the 'file extension'. All Children are wrapped too. Then I used an OutlineView to show these two properties. Great tool to find wrong layer entries." I asked him for the code he describes above and he sent it to me. He discussed it here in his blog, while all the code involved can be read below. The result is as follows, where you can see that the OutlineView shows information that my simple implementation (via a BeanTreeView) kept hidden: And so here is the definition of the Node. class LayerPropertiesNode extends FilterNode { public LayerPropertiesNode(Node node) { super(node, isFolder(node) ? Children.create(new LayerPropertiesFactory(node), true) : Children.LEAF); } private static boolean isFolder(Node node) { return null != node.getLookup().lookup(DataFolder.class); } @Override public String getDisplayName() { return getLookup().lookup(FileObject.class).getName(); } @Override public Image getIcon(int type) { FileObject fo = getLookup().lookup(FileObject.class); try { DataObject data = DataObject.find(fo); return data.getNodeDelegate().getIcon(type); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } return super.getIcon(type); } @Override public Image getOpenedIcon(int type) { return getIcon(type); } @Override public PropertySet[] getPropertySets() { Set set = Sheet.createPropertiesSet(); set.put(new PropertySupport.ReadOnly<Integer>( "position", Integer.class, "Position", null) { @Override public Integer getValue() throws IllegalAccessException, InvocationTargetException { FileObject fileEntry = getLookup().lookup(FileObject.class); Integer posValue = (Integer) fileEntry.getAttribute("position"); return posValue != null ? posValue : Integer.valueOf(0); } }); set.put(new PropertySupport.ReadOnly<String>( "ext", String.class, "Extension", null) { @Override public String getValue() throws IllegalAccessException, InvocationTargetException { FileObject fileEntry = getLookup().lookup(FileObject.class); return fileEntry.getExt(); } }); PropertySet[] original = super.getPropertySets(); PropertySet[] withLayer = new PropertySet[original.length + 1]; System.arraycopy(original, 0, withLayer, 0, original.length); withLayer[withLayer.length - 1] = set; return withLayer; } private static class LayerPropertiesFactory extends ChildFactory<FileObject> { private final Node context; public LayerPropertiesFactory(Node context) { this.context = context; } @Override protected boolean createKeys(List<FileObject> list) { FileObject folder = context.getLookup().lookup(FileObject.class); FileObject[] children = folder.getChildren(); List<FileObject> ordered = FileUtil.getOrder(Arrays.asList(children), false); list.addAll(ordered); return true; } @Override protected Node createNodeForKey(FileObject key) { AbstractNode node = new AbstractNode(org.openide.nodes.Children.LEAF, key.isFolder() ? Lookups.fixed(key, DataFolder.findFolder(key)) : Lookups.singleton(key)); return new LayerPropertiesNode(node); } } } Then here is the definition of the Action, which pops up a JPanel, displaying an OutlineView: @ActionID(category = "Tools", id = "de.nigjo.nb.layerview.LayerViewAction") @ActionRegistration(displayName = "#CTL_LayerViewAction") @ActionReferences({ @ActionReference(path = "Menu/Tools", position = 1450, separatorBefore = 1425) }) @Messages("CTL_LayerViewAction=Display XML Layer") public final class LayerViewAction implements ActionListener { @Override public void actionPerformed(ActionEvent e) { try { Node node = DataObject.find(FileUtil.getConfigRoot()).getNodeDelegate(); node = new LayerPropertiesNode(node); node = new FilterNode(node) { @Override public Component getCustomizer() { LayerView view = new LayerView(); view.getExplorerManager().setRootContext(this); return view; } @Override public boolean hasCustomizer() { return true; } }; NodeOperation.getDefault().customize(node); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } } private static class LayerView extends JPanel implements ExplorerManager.Provider { private final ExplorerManager em; public LayerView() { super(new BorderLayout()); em = new ExplorerManager(); OutlineView view = new OutlineView("entry"); view.addPropertyColumn("position", "Position"); view.addPropertyColumn("ext", "Extension"); add(view); } @Override public ExplorerManager getExplorerManager() { return em; } } }

Read the article

What's New in Oracle VM VirtualBox 4.2?

- by Fat Bloke

A year is a long time in the IT industry. Since the last VirtualBox feature release, which was a little over a year ago, we've seen: new releases of cool new operating systems, such as Windows 8, ChromeOS, and Mountain Lion; we've seen a myriad of new Linux releases from big Enterprise class distributions like Oracle 6.3, to accessible desktop distros like Ubuntu 12.04 and Fedora 17; and we've also seen the spec of a typical PC or laptop double in power. All of these events have influenced our new VirtualBox version which we're releasing today. Here's how... Powerful hosts One of the trends we've seen is that as the average host platform becomes more powerful, our users are consistently running more and more vm's. Some of our users have large libraries of vm's of various vintages, whilst others have groups of vm's that are run together as an assembly of the various tiers in a multi-tiered software solution, for example, a database tier, middleware tier, and front-ends. So we're pleased to unveil a more powerful VirtualBox Manager to address the needs of these users: VM Groups Groups allow you to organize your VM library in a sensible way, e.g. by platform type, by project, by version, by whatever. To create groups you can drag one VM onto another or select one or more VM's and choose Machine...Group from the menu bar. You can expand and collapse groups to save screen real estate, and you can Enter and Leave a group (think iPad navigation here) by using the right and left arrow keys when groups are selected. But groups are more than passive folders, because you can now also perform operations on groups, rather than all the individual VMs. So if you have a multi-tiered solution you can start the whole stack up with just one click. Autostart Many VirtualBox users run dedicated services in their VMs, for example, running a Wiki. With these types of VM workloads, you really want the VM start up when the host machine boots up. So with 4.2 we've introduced a cross-platform Auto-start mechanism to allow you to treat VMs as host services. Headless VM Launching With VM's such as web servers, wikis, and other types of server-class workloads, the Console of the VM is pretty much redundant. For some time now VirtualBox has offered a separate launch mechanism for these VM's, namely the command-line interface commands VBoxHeadless or VBoxManage startvm ... --type headless commands. But with 4.2 we also allow you launch headless VMs from the Manager. Simply hold down Shift when launching the VM from the Manager. It's that easy. But how do you stop a headless VM? Well, with 4.2 we allow you to Close the VM from the Manager. (BTW best to use the ACPI Shutdown method which allows the guest VM to close down gracefully.) Easy VM Creation For our expert users, the New VM Wizard was a little tiresome, so now there's a faster 2-click VM creation mode. Just Hide the description when creating a new VM. Powerful VMs As the hosts have become more powerful, so are the guests that are running inside them. Here are some of the 4.2 features to accommodate them: Virtual Network Interface Cards With 4.2, it's now possible to create VMs with up to 36 NICs, when using the ICH9 chipset emulation. But with great power comes great responsibility (didn't Obi-Wan say something similar?), and so we have also introduced bandwidth limiting to prevent a rogue VM stealing the whole pipe. VLAN tagging Some of our users leverage VLANs extensively so we've enhanced the E1000 NICs to support this. Processor Performance If you are running a CPU which supports Nested Paging (aka EPT in the Intel world) such as most of the Core i5 and i7 CPUs, or are running an AMD Bulldozer or later, you should see some performance improvements from our work with these processors. And while we're talking Processors, we've added support for some of the more modern VIA CPUs too. Powerful Automation Because VirtualBox runs atop a fully blown operating system, it makes sense to leverage the capabilities of the host to run scripts that can drive the guest VMs. Guest Automation was introduced in a prior release but with 4.2 we've revamped the APIs to allow a richer and more powerful set of operations to be executed by the guest. Check out the IGuest APIs in the VirtualBox Programming Guide and Reference (SDK). Powerful Platforms All the hardcore engineering that has gone into 4.2 has been done for a purpose and that is to deliver a fast and powerful engine that can run almost any x86 OS because of the integrity of the virtualization. So we're pleased to add support for these platforms: Mac OS X "Mountain Lion" Windows 8 Windows Server 2012 Ubuntu 12.04 (“Precise Pangolin”) Fedora 17 Oracle Linux 6.3 Here's the proof: We don't have time to go into the myriad of smaller improvements such as support for burning audio CDs from a guest, bi-directional clipboard control, drag-and-drop of files into Linux guests, etc. so we'll leave that as an exercise for the user as soon as you've downloaded from the Oracle or community site and taken a peek at the User Guide. So all in all, a pretty solid release, one that we hope you'll enjoy discovering. - FB

Read the article

Stumbling Through: Visual Studio 2010 (Part II)

I would now like to expand a little on what I stumbled through in part I of my Visual Studio 2010 post and touch on a few other features of VS 2010. Specifically, I want to generate some code based off of an Entity Framework model and tie it up to an actual data source. Im not going to take the easy way and tie to a SQL Server data source, though, I will tie it to an XML data file instead. Why? Well, why not? This is purely for learning, there are probably much better ways to get strongly-typed classes around XML but it will force us to go down a path less travelled and maybe learn a few things along the way. Once we get this XML data and the means to interact with it, I will revisit data binding to this data in a WPF form and see if I cant get reading, adding, deleting, and updating working smoothly with minimal code. To begin, I will use what was learned in the first part of this blog topic and draw out a data model for the MFL (My Football League) - I dont want the NFL to come down and sue me for using their name in this totally football-related article. The data model looks as follows, with Teams having Players, and Players having a position and statistics for each season they played: Note that when making the associations between these entities, I was given the option to create the foreign key but I only chose to select this option for the association between Player and Position. The reason for this is that I am picturing the XML that will contain this data to look somewhat like this: <MFL> <Position/> <Position/> <Position/> <Team> <Player> <Statistic/> </Player> </Team> </MFL> Statistic will be under its associated Player node, and Player will be under its associated Team node no need to have an Id to reference it if we know it will always fall under its parent. Position, however, is more of a lookup value that will not have any hierarchical relationship to the player. In fact, the Position data itself may be in a completely different xml file (something Id like to play around with), so in any case, a player will need to reference the position by its Id. So now that we have a simple data model laid out, I would like to generate two things based on it: A class for each entity with properties corresponding to each entity property An IO class with methods to get data for each entity, either all instances, by Id or by parent. Now my experience with code generation in the past has consisted of writing up little apps that use the code dom directly to regenerate code on demand (or using tools like CodeSmith). Surely, there has got to be a more fun way to do this given that we are using the Entity Framework which already has built-in code generation for SQL Server support. Lets start with that built-in stuff to give us a base to work off of. Right click anywhere in the canvas of our model and select Add Code Generation Item: So just adding that code item seemed to do quite a bit towards what I was intending: It apparently generated a class for each entity, but also a whole ton more. I mean a TON more. Way too much complicated code was generated now that code is likely to be a black box anyway so it shouldnt matter, but we need to understand how to make this work the way we want it to work, so lets get ready to do some stumbling through that text template (tt) file. When I open the .tt file that was generated, right off the bat I realize there is going to be trouble there is no color coding, no intellisense no nothing! That is going to make stumbling through more like groping blindly in the dark while handcuffed and hopping on one foot, which was one of the alternate titles I was considering for this blog. Thankfully, the community comes to my rescue and I wont have to cast my mind back to the glory days of coding in VI (look it up, kids). Using the Extension Manager (Available under the Tools menu), I did a quick search for tt editor in the Online Gallery and quickly found the Tangible T4 Editor: Downloading and installing this was a breeze, and after doing so I got some color coding and intellisense while editing the tt files. If you will be doing any customizing of tt files, I highly recommend installing this extension. Next, well see if that is enough help for us to tweak that tt file to do the kind of code generation that we wantDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Traversing Java Object Arrays [migrated]

- by Sundi

Please Help. Program does not read Array rentBooks[] in the for() loop this option is selected when choosing option 2 then option 4 in the menu The Array reads perfectly when reading the items after the setBook() Method import java.io.File; import java.io.FileNotFoundException; import java.util.Scanner; import java.io.*; import java.util.Locale; import java.text.SimpleDateFormat ; class Library { protected static String Author; protected static String Title; SimpleDateFormat PublicationDate; int itemCode; int available = 1; } class Book extends Library { protected static String PublisherName; protected static String Edition; static Book[] rentBooks = new Book[5]; //Book[] rentBooks = new Book[5]; int count = 0; public Book() { String start= "start"; showBook.main(anza); } public void setBook( String Auth, String Titl, String PublishName) { this.Author = Auth; this.Title = Titl; this.PublisherName = PublishName; } public void getBook() { //System.out.println("*************BOOKS*************************"); System.out.println( "\n\nThe Author of the first Book is "+ this.Author ); System.out.println( "The Title of the book is "+ this.Title); System.out.println( "The Publisher of the book is "+ this.PublisherName ); // System.out.println( "The Edition of the book is "+ Edition ); } } class showBook{ static Book[] rentBooks = new Book[5]; static Book[] rentBooks2 = new Book[5]; static int a,b; //for ( a=0; a < 5; a++ ) //rentBooks2[a] = new Book(); public static void main(String[] args) { File file = new File("Book2.txt"); //Book libraryBooks = new Book(); int j; //initialise Array Class Objects for( j = 0; j < 5; j++) { rentBooks[j] = new Book(); } int i = 0; try{ Scanner scanner = new Scanner(file); scanner.useDelimiter(","); String loan=""; int loan2; while( scanner.hasNextLine()) { //Should the Books be Stored in An Array? // At the moment you have separate objects stored in unknown location String Author = scanner.next(); String Title = scanner.next(); String PublisherName = scanner.next(); if ( i < 4) { System.out.println(i); rentBooks[i].setBook(Author, Title, PublisherName); rentBooks[i].getBook(); // MEMBERS SHOWN i++; } public class readBook4{ public static void main(String[] args) { int number =0; System.out.println( "Please select one of the choices below " ); System.out.println( "Select option 1 to list all items in the library "); System.out.println( "Select option 2 to list the items by category"); System.out.println( "Select option 3 to choose item available in the library "); System.out.println( "Select option 7 to exit " ); InputStreamReader isr = new InputStreamReader( System.in); BufferedReader buffer = new BufferedReader( isr); String input = ""; try { input = buffer.readLine(); number = Integer.parseInt(input); //int number = Integer.parseInt( Edition); if ( number == 1 ) { System.out.println( " \nThanks you are reading "+ input); //showStudent.main(args); showPeriodical.main(args); showDVD.main(args); // showBook.main(args); } if ( number == 2 ) { //jht.cls(); int number2; System.out.println( "Please select one of the choices below " ); System.out.println( "Select option 4 to list Books only "); System.out.println( "Select option 5 to list the Periodicals only"); System.out.println( "Select option 6 to list DVDs only"); InputStreamReader isr2 = new InputStreamReader(System.in); BufferedReader buffer2 = new BufferedReader(isr2); String input2 = ""; try { input2 = buffer2.readLine(); buffer.close(); } catch(IOException e) { System.out.println("An input error has occured"); } //System.out.println("Thanks, you are reading" + input2); number2 = Integer.parseInt(input2); if ( number2 == 4 ) { showBook.main(args); } if ( number2 == 5 ) { showPeriodical.main(args); } if ( number2 == 6 ) { showDVD.main(args); } // readBook4.main(args); } if( number == 3 ) { //showBook.main(args); showBook.availableBooks(); showDVD.availableDVD(); showPeriodical.availablePeriodical(); } if ( number == 7 ) { showStudent.main(args); } buffer.close(); } catch( IOException e ) { System.out.println( " An input error has occured "); } //System.out.println( " \nThanks you are reading "+ input); } } } //buffer.close(); scanner.close(); } catch( FileNotFoundException e) { System.out.println("File not Found"); } for ( i=0; i < 5; i++ ) rentBooks[i].getBook(); //ARRAY NOT SHOWN } }

Read the article

Drupal views pane content not visible

- by jwandborg

I have a pane on my front page with one content pane and two views panes. I can't see the content of the third view ($pane->pid = "new-3" / comment: # Senaste bilder). Here's my panel <?php $page = new stdClass; $page->disabled = FALSE; /* Edit this to true to make a default page disabled initially */ $page->api_version = 1; $page->name = 'frontpage'; $page->task = 'page'; $page->admin_title = 'Startsida'; $page->admin_description = ''; $page->path = 'hem'; $page->access = array(); $page->menu = array(); $page->arguments = array(); $page->conf = array(); $page->default_handlers = array(); $handler = new stdClass; $handler->disabled = FALSE; /* Edit this to true to make a default handler disabled initially */ $handler->api_version = 1; $handler->name = 'page_frontpage_panel_context'; $handler->task = 'page'; $handler->subtask = 'frontpage'; $handler->handler = 'panel_context'; $handler->weight = 0; $handler->conf = array( 'title' => 'Panel', 'no_blocks' => FALSE, 'css_id' => '', 'css' => '', 'contexts' => array(), 'relationships' => array(), ); $display = new panels_display; $display->layout = 'onecol'; $display->layout_settings = array(); $display->panel_settings = array(); $display->cache = array(); $display->title = ''; $display->content = array(); $display->panels = array(); # Bild $pane = new stdClass; $pane->pid = 'new-1'; $pane->panel = 'middle'; $pane->type = 'custom'; $pane->subtype = 'custom'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'admin_title' => '', 'title' => '', 'body' => '<img src="/sites/all/themes/zen/ils-2010/img/graphics-start-text-v3.png" alt="Hej! Vi vet att du och dina klasskompisar har mycket att tänka på under er sista termin i gymnasiet. Därför har vi samlat några saker som vi tror kommer göra er studenttid lite roligare och lite enklare. Välkommen!" />', 'format' => '2', 'substitute' => TRUE, ); $pane->cache = array(); $pane->style = array(); $pane->css = array(); $pane->extras = array(); $pane->position = 0; $display->content['new-1'] = $pane; $display->panels['middle'][0] = 'new-1'; # Topplista $pane = new stdClass; $pane->pid = 'new-2'; $pane->panel = 'middle'; $pane->type = 'views_panes'; $pane->subtype = 'topplista_terms-panel_pane_1'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'link_to_view' => 1, 'more_link' => 0, 'use_pager' => 0, 'pager_id' => '', 'items_per_page' => '10', 'offset' => '0', 'path' => 'flaktavling/topplista/klasser', 'override_title' => 0, 'override_title_text' => '', ); $pane->cache = array(); $pane->style = array(); $pane->css = array(); $pane->extras = array(); $pane->position = 1; $display->content['new-2'] = $pane; $display->panels['middle'][1] = 'new-2'; # Senaste bilder $pane = new stdClass; $pane->pid = 'new-3'; $pane->panel = 'middle'; $pane->type = 'views_panes'; $pane->subtype = 'senaste_bilderna-panel_pane_1'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'link_to_view' => 0, 'more_link' => 0, 'use_pager' => 0, 'pager_id' => '', 'items_per_page' => '2', 'offset' => '0', 'path' => 'galleri/senaste-bilder', 'override_title' => 0, 'override_title_text' => '', ); $pane->cache = array(); $pane->style = array(); $pane->css = array( 'css_id' => 'pane-senaste-bilderna', 'css_class' => '', ); $pane->extras = array(); $pane->position = 2; $display->content['new-3'] = $pane; $display->panels['middle'][2] = 'new-3'; $display->hide_title = PANELS_TITLE_FIXED; $display->title_pane = 'new-1'; $handler->conf['display'] = $display; $page->default_handlers[$handler->name] = $handler; Here´s the view senaste_bilderna <?php $view = new view; $view->name = 'senaste_bilderna'; $view->description = ''; $view->tag = ''; $view->view_php = ''; $view->base_table = 'node'; $view->is_cacheable = FALSE; $view->api_version = 2; $view->disabled = FALSE; /* Edit this to true to make a default view disabled initially */ $handler = $view->new_display('default', 'Förvalt', 'default'); $handler->override_option('fields', array( 'field_picture_fid' => array( 'id' => 'field_picture_fid', 'table' => 'node_data_field_picture', 'field' => 'field_picture_fid', ), )); $handler->override_option('sorts', array( 'created' => array( 'order' => 'DESC', 'granularity' => 'second', 'id' => 'created', 'table' => 'node', 'field' => 'created', 'relationship' => 'none', ), )); $handler->override_option('filters', array( 'type' => array( 'operator' => 'in', 'value' => array( 'ils_picture' => 'ils_picture', ), 'group' => '0', 'exposed' => FALSE, 'expose' => array( 'operator' => FALSE, 'label' => '', ), 'id' => 'type', 'table' => 'node', 'field' => 'type', 'override' => array( 'button' => 'Åsidosätt', ), 'relationship' => 'none', ), )); $handler->override_option('access', array( 'type' => 'none', )); $handler->override_option('cache', array( 'type' => 'none', )); $handler->override_option('title', 'Senaste bilderna från galleriet'); $handler->override_option('items_per_page', 2); $handler->override_option('row_options', array( 'inline' => array( 'field_picture_fid' => 'field_picture_fid', ), 'separator' => '', 'hide_empty' => 0, )); $handler = $view->new_display('panel_pane', 'Content pane', 'panel_pane_1'); $handler->override_option('pane_title', ''); $handler->override_option('pane_description', ''); $handler->override_option('pane_category', array( 'name' => 'View panes', 'weight' => 0, )); $handler->override_option('allow', array( 'use_pager' => FALSE, 'items_per_page' => FALSE, 'offset' => FALSE, 'link_to_view' => FALSE, 'more_link' => FALSE, 'path_override' => FALSE, 'title_override' => FALSE, 'exposed_form' => FALSE, )); $handler->override_option('argument_input', array()); $handler->override_option('link_to_view', 0); $handler->override_option('inherit_panels_path', 0); $handler = $view->new_display('page', 'Sida', 'page_1'); $handler->override_option('path', 'galleri/senaste-bilderna'); $handler->override_option('menu', array( 'type' => 'none', 'title' => '', 'description' => '', 'weight' => 0, 'name' => 'navigation', )); $handler->override_option('tab_options', array( 'type' => 'none', 'title' => '', 'description' => '', 'weight' => 0, )); I have edited one views template, here's the code in the file views-view-fields--senaste-bilderna.tpl.php <?php // $Id: views-view-fields.tpl.php,v 1.6 2008/09/24 22:48:21 merlinofchaos Exp $ /** * @file views-view-fields.tpl.php * Default simple view template to all the fields as a row. * * - $view: The view in use. * - $fields: an array of $field objects. Each one contains: * - $field->content: The output of the field. * - $field->raw: The raw data for the field, if it exists. This is NOT output safe. * - $field->class: The safe class id to use. * - $field->handler: The Views field handler object controlling this field. Do not use * var_export to dump this object, as it can't handle the recursion. * - $field->inline: Whether or not the field should be inline. * - $field->inline_html: either div or span based on the above flag. * - $field->separator: an optional separator that may appear before a field. * - $row: The raw result object from the query, with all data it fetched. * * @ingroup views_templates */ ?> <?php foreach ($fields as $id => $field): ?> <?php $result = db_query('SELECT * FROM {files} WHERE fid = ' . $row->node_data_field_picture_field_picture_fid ); ?> <?php $data = db_fetch_object( $result ); ?> <div id="senaste-bilderna-first"><img src="<?= imagecache_create_url('senaste_bilderna_thumbnail', $data->filepath) ?>" alt="" /></div> <?php /* if (!empty($field->separator)): <?php print $field->separator; <?php endif; <<?php print $field->inline_html; class="views-field-<?php print $field->class; "> <?php if ($field->label): <label class="views-label-<?php print $field->class; "> <?php print $field->label; : </label> <?php endif; <?php // $field->element_type is either SPAN or DIV depending upon whether or not // the field is a 'block' element type or 'inline' element type. <<?php print $field->element_type; class="field-content"><?php print $field->content; </<?php print $field->element_type; > </<?php print $field->inline_html;> <?php*/ endforeach; ?> This is the result <div class="panel-separator"> </div> <div class="panel-pane pane-views-panes pane-senaste-bilderna-panel-pane-1" id="pane-senaste-bilderna"> <h2 class="pane-title">Senaste bilderna från galleriet </h2> <div class="pane-content"> <div class="view view-senaste-bilderna view-id-senaste_bilderna view-display-id-panel_pane_1 view-dom-id-2"> <div class="view-content"> <div class="views-row views-row-1 views-row-odd views-row-first"> </div> <div class="views-row views-row-2 views-row-even views-row-last"> </div> </div> </div> </div> </div> My Drupal version is 6.16

Search Results

Search found 19183 results on 768 pages for 'android menu'.

Page 742/768 | < Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749 | Next Page >

- by chazomaticus

- by George Maggessy

- by Divya Malik

- by Valter Minute

- by mbcrump

- by Yousef_Jadallah

- by MichaelM-Oracle

- by Denis T

- by Anirudha

- by Dennis Vroegop

- by Anthony Trudeau

- by Ibuntu

- by anirudha

- by Charles Young

- by Bob Webster

- by Tim Murphy

- by Geertjan

- by Fat Bloke

- by Sundi

- by jwandborg

< Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749 | Next Page >