Search Results

Search found 31994 results on 1280 pages for 'input output'.

Page 749/1280 | < Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >

• How to split audio into multiple channels from optical S/PDIF or 1/8"?

  - by Josh M.

  I have a motherboard which has an optical S/PDIF output or 1/8". I'd like to "split" that signal into the appropriate channels so that I can then connect that to the wires behind my car's headunit which, in turn, run to the amp. The factory Bose amp just takes a single connector with a million wires running out of it, so that's why I would need to separate the signal into separate channels. On the other end there are four RCA connectors: front left, front right, rear left, rear right. The sub-woofer signal does not require an additional connection. Edit: Revised to include S/PDIF or 1/8".

  Read the article

• Windows 7 connect to Lion file sharing

  - by Automaton

  Trying to access my Mac from a Windows 7 computer, I fail with the infamous error 86 incorrect password. Now this appears to be a well-known problem with countless threads on the internet giving as many "solutions" as there are discussion threads about it (mostly ranging from installing third-party commercial samba servers, to switching to some other protocol, to compiling a plain-vanilla Samba installation - the latter which I will probably do when I give up this :) ) I am stubborn, and I believe there must be some problem here that can be solved or worked around, but there is surprisingly little detail about this problem. It appears to have something to do with a mismatch of authentication methods. Trying to run samba in debug mode: sudo /usr/sbin/smbd -debug -stdout gets me this output when trying to access it from Win 7 ... smb1_dispatch_one [smb_dispatch.cpp:377] dispatching SMB_COM_SESSION_SETUP_ANDX smb1_dispatch_session_setup [session_setup.cpp:261] FIXME erase existing sessions log_gss_error [gssapi_mechanism.cpp:97] gssapi: gss-code: Miscellaneous failure (see text) log_gss_error [gssapi_mechanism.cpp:113] gssapi: mech-code: unknown mech-code 22 for mech unknown What is the problem here, and how do I fix it?

  Read the article

• OUCH! Laptop running SUPER HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu editions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! (left side of terminal) (right side of terminal) This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• MVC: How to Implement Linked Views?

  - by cw'

  I'm developing a java application to visualize time series. I need (at least) three linked views, meaning that interaction with one of them updates the others. The views are: A list represents the available and currently selected time series. The selected time series are used as input for subsequent computations. Changing the selection should update the other views. A line chart displays the available and selected time series. Time series should be selectable from here by clicking on them. A bar chart shows aggregated data on time series. When zooming in to a period of time, the line chart should zoom in to the same period (and vice versa). How to implement this nicely, from a software engineering point of view? I.e. I'd like to write reusable and clear, maintainable code. So I thought of the MVC pattern. At first I liked the idea of having the three view components observing my model class and to refresh views upon being notified. But then, it didn't feel right to store view related data in the model. Storing e.g. the time series selection or plot zoom level in the model makes implications about the view which I wouldn't want in a reusable model. On the other hand, having the controllers observe each other results in a lot of dependencies. When adding another view, I'd have to register all other views as observer of the new view and vice versa, passing around many references and introducing dependencies. Maybe another "model" storing only view-related data would be the solution?

  Read the article

• FM Transmitter for the Home

  - by greggannicott

  After asking this question regarding piping music through my home I'm looking to buy an FM transmitter. I'd like to connect it to my home pc (ie. into the speaker port), and I'd then control the output with my iPhone (ie. using Apple's Remote software). The problem is, given that almost every FM transmitter is advertised to be used in the car (ie. an iTrip) it's proving very tricky knowing which one would be ideal for the home. First, has anyone tried this? Did it work ok or was there simply to much interference for it work. Secondly, if it did work ok, can anyone recommend a reasonable transmitter? For what I need it seems like an ideal solution, so given that I'm struggling to find information regarding it I'm starting to believe it's not as ideal as it first seems. Thanks in advanance.

  Read the article

• Computer suddenly won't boot - stops at a flashing prompt

  - by Dave M G

  I have been running Ubuntu on my computer for a long time, and I have been using 11.10 since it became available in October. Suddenly, this morning, when I rebooted, the computer would not reach the log in screen. I go through the standard POST boot sequence, and I also get a splash screen for my Nvidia graphics card, so at least most of the hardware seems to be working. After that, all I get is a flashing text prompt - one blinking white underline character on a screen that is otherwise completely blank. I don't think it is even reaching GRUB. No key input is possible. I have tried various key combinations to try and initiate some kind of interface, be it command line or anything else. The only key combination that works is [CTRL]+[ALT]+[Delete] to reboot. I realize this is likely to be a hardware problem, but it could be an Ubuntu problem(?), so I'm hoping for a specific set of troubleshooting steps so I can diagnose and repair this issue. My current suspicion is that one of the drives in my 2 disk software RAID has failed (even though they should be too new for that). However, this computer is critical to my work, so I'd like to invite advice on any possibilities so as to waste as little time as possible in fixing this machine.

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• One monitor getting spilled over into other monitor: how to do a 100% reset of gnome graphics configuration

  - by Paul Nathan

  I had to kill a VMWare process and afterwards, my monitor's configuration is buggy. I have 2 monitors in a side-by-side configuration. My right-hand monitor is the secondary monitor. Upon its right-hand side there are about 50 pixels showing from the left side of the lefthand monitor (ie, as if it was wrapped around). Further, my mouse clicks are registering as about 50 pixels sideways from where they should be. It's as if those 50 pixels between monitors got gobbled. What have I done? I've reset the screen configuration in multiple ways, using xrandr, multiple monitors app, etc. This persists in different side-by-side configurations, and also persists with another user. It does not occur with XFCE. Resetting the Window manager with the Compiz reset WM app does not fix this. I've concluded the burn-to-the-ground approach is likely the best, and would like to do a 100% reset of my graphics settings. It's an Intel integrated chipset. Removing ~/.config/monitors.xml did not work. Also, interestingly, the mouse can mouse-over the 50 errant pixels on the rhs of the right-hand monitor. I hypothesize that it's a compositing problem occurring at the layer where the background, selection, and clicks are caught. Also, inverting the right-hand monitor removes the issue, but renders the screen unusable. Even more datapoints: This happens in KDE as well Sometimes logging into Gnome and running xrandr --output DVI1 --auto resets it, but the issue immediately reappears when I press alt-tab. With Compiz Application Switch turned on, the workspace is 'pushed back' a bit, and the slice on the RHS follows it as well. I'm wondering if it's a flaw in the compiz workspace compositing configuration. I suspect the error was in the compositing configuration. I installed 11.10.

  Read the article

• Sony Bravia (KDL-32EX402) audio connection fails

  - by Rasmus

  Hey. I'm having trouble connecting my computers audio to the TV (Sony Bravia KDL-32EX402). I'm using a standard AUX cable (some kind of adapter for L/R to go into the headphone plug on the computer). I'm connecting the other end to the back of the TV, it doesn't actually say "AUDIO IN" but it has to be (is also right below the "HDMI 1 AUDIO IN). When changing to "PC-mode" and setting the audio input to "PC" nothing happens. (but the pictures get's transmitted fine by VGA). I have checked that it's not the PC's headphone port, nor the AUX cable. What to do, what to do ?

  Read the article

• Ubuntu won't log in after update

  - by Dave M G

  I just updated Ubuntu about 15 minutes ago on my desktop which is running 12.04. Within the set of updates, there were some kernel upgrades. It didn't say I needed to reboot after the update was finished, but I thought I would anyway. The computer successfully rebooted up to the login screen. However, after entering my password, the screen goes black for a moment, then it comes back to the login screen. I tried the suggestions in this question, but unfortunately they didn't help. In the accepted answer, the questioner vaguely says it was a "Unity problem". I'm using Gnome-classic with full Compiz effects. I tried uninstalling and reinstalling Compiz, but that didn't fix anything. So... I can't use my desktop computer until this is fixed. I hope there is some help soon. I've uploaded the output of cat /var/log/Xorg.0.log to Pastebin. A temporary solution of changing to gdm instead of lightdm was found with help in the chat room.

  Read the article

• How to write regex in asp.net MVC 3 razor

  - by anirudha

  here is a small trick to write regex and exceptional code in MVC3. first trick is use @@ instead of @ it’s work don’ worry output goes @ not @@. second trick is that you can use <text></text> tag in MVC to use some code who give error because viewengine does not accept them. like var pattern = new RegExp(/^(("[\w-\s]+")|([\w-]+(?:\.[\w-]+)*)|("[\w-\s]+")([\w-]+(?:\.[\w-]+)*))(@((?:[\w-]+\.)*\w[\w-]{0,66})\.([a-z]{2,6}(?:\.[a-z]{2})?)$)|(@\[?((25[0-5]\.|2[0-4][0-9]\.|1[0-9]{2}\.|[0-9]{1,2}\.))((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[0-9]{1,2})\.){2}(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[0-9]{1,2})\]?$)/i);   this regex not work because it’s use @ so replace them to @@ e var pattern = new RegExp(/^(("[\w-\s]+")|([\w-]+(?:\.[\w-]+)*)|("[\w-\s]+")([\w-]+(?:\.[\w-]+)*))(@@((?:[\w-]+\.)*\w[\w-]{0,66})\.([a-z]{2,6}(?:\.[a-z]{2})?)$)|(@@\[?((25[0-5]\.|2[0-4][0-9]\.|1[0-9]{2}\.|[0-9]{1,2}\.))((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[0-9]{1,2})\.){2}(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[0-9]{1,2})\]?$)/i); now it will work. second way is that use text tag in MVC to make them work like <text> function isValidEmailAddress(emailAddress) { var pattern = new RegExp(/^(("[\w-\s]+")|([\w-]+(?:\.[\w-]+)*)|("[\w-\s]+")([\w-]+(?:\.[\w-]+)*))(@((?:[\w-]+\.)*\w[\w-]{0,66})\.([a-z]{2,6}(?:\.[a-z]{2})?)$)|(@\[?((25[0-5]\.|2[0-4][0-9]\.|1[0-9]{2}\.|[0-9]{1,2}\.))((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[0-9]{1,2})\.){2}(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[0-9]{1,2})\]?$)/i); return pattern.test(emailAddress); } </text>

  Read the article

• receiving "command not found" error messages after fresh reinstall of Lubuntu 14.04

  - by user236378

  Lubuntu 14.04 was working really great. . .until I messed up and had to do a complete fresh reinstall. Now I receive error messages when I input commands into the Terminal, even after immediately completing the fresh install. For example I type: sudo leafpad ?/etc/default/ or sudo leafpad ?/etc/default/grub I get: sudo: leafpad: command not found I type: sudo update-initramfs ?-u or sudo update-grub I get: sudo: update-initramfs: command not found or sudo: update-grub: command not found If I use the command mkdir I get: mkdir: command not found I also get this same exact error message, command not found, with sudo apt-get and wget In other words I can't do anything that I was able to do when inputting commands into the terminal. So I cannot add any repositories or update anything at all. I am not really sure what is causing the problem(s). It appeared to me that Lubuntu installed and booted up OK. However just as soon as I enter anything into the Terminal I immediately get the above error messages. I have tried to do the reinstall three times, same error messages. If anyone can suggest any fixes I would really appreciate it very much. Thank you!

  Read the article

• Mouse Speed in GLUT and OpenGL?

  - by CroCo

  I would like to simulate a point that moves in 2D. The input should be the speed of the mouse, so the new position will be computed as following new_position = old_position + delta_time*mouse_velocity As far as I know in GLUT there is no function to acquire the current speed of the mouse between each frame. What I've done so far to compute the delta_time as following void Display() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glColor3f(1.0f, 0.0f, 0.0f); static int delta_t, current_t, previous_t; current_t = glutGet(GLUT_ELAPSED_TIME); delta_t = current_t - previous_t; std::cout << delta_t << std::endl; previous_t = current_t; glutSwapBuffers(); } Where should I start from here? (Note: I have to get the speed of the mouse because I'm modeling a system) Edit: Based on the above code, delta_time fluctuates so much 34 19 2 20 1 20 0 16 1 1 10 21 0 13 1 19 34 0 13 0 6 1 14 Why does this happen?

  Read the article

• My computer may have been compromised, what should I do?

  - by InkBlend

  A few weeks ago, my machine (lets call it "main") was logged into wirelessly from an unauthorized host, probably using ssh. I did not detect the intrusion until a few days ago, and my machine is completely shut down. I found the login using this line from last: myusername pts/1 ipad Tue Oct 15 22:23 - 22:25 (00:02) Needless to say, not only does no one in my family own an iPad, but almost none of my friends do, either. This makes me suspect that whoever was behind this changed the hostname of their machine. Additionally, I discovered this line in the last output on another machine of mine ("secondary"): myusername pts/2 :0 Tue Oct 15 22:23 - 22:23 (00:00) This line coincides with the timestamp from main, which has password-less ssh access (through keys) to secondary. Is it possible that whoever broke in to main has also rooted secondary? How can I prevent this from happening again? Are there logs that I can look through to determine exactly how main was accessed (I am the only user on the system and have a very strong password)? Is it at all possible that this is just a weird bug that occurred? Should I, and where should I start looking for rootkits and/or keyloggers? In short, what should I do?

  Read the article

• Laptop runs HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• License validation and calling home

  - by VitalyB

  I am developing an application that, when bought, can be activated using a license. Currently I am doing offline validation which is a bit troubling to me. I am aware there is nothing to do against cracks (i.e modified binaries), however, I am thinking to trying to discourage license-key pirating. Here is my current plan: When the user activates the software and after offline validation is successful, it tries to call home and validate the license. If home approves of the license or if home is unreachable, or if the user is offline, the license gets approved. If home is reached and tells the license is invalid, validation fails. Licensed application calls home the same way every time during startup (in background). If license is revoked (i.e pirated license or generated via keygen), the license get deactivated. This should help with piracy of licenses - An invalid license will be disabled and a valid license that was pirated can be revoked (and its legal owner supplied with new license). Pirate-users will be forced to use cracked version which are usually version specific and harder to reach. While it generally sounds good to me, I have some concerns: Users tend to not like home-calling and online validation. Would that kind of validation bother you? Even though in case of offline/failure the application stays licensed? It is clear that the whole scheme can be thwarted by going offline/firewall/etc. I think that the bother to do one of these is great enough to discourage casual license sharing, but I am not sure. As it goes in general with licensing and DRM variations, I am not sure the time I spend on that kind of protection isn't better spent by improving my product. I'd appreciate your input and thoughts. Thanks!

  Read the article

• Can't reach custom C# forms application remotely.

  - by gnucom

  Hello, I'm working in Windows Server 2008. I have a very basic C# forms application (not a service) that is listening on a port, say 56112. When using telnet I can connect from the localhost and send and receive data. For some reason I cannot remotely connect to the application. I know I have a connection because I can telnet to 23 on the remotely fine. I've opened this port on the firewall, created rules in/out in advanced firewall, disabled the firewall completely, and more. Any suggestions would be great! This is the telnet output: Microsoft Telnet> open server.cc 56112 Connecting server.cc...Could not open connection to the host, on port 56112: Connect failed

  Read the article

• SQL Server Migration Assistant for Oracle problem

  - by Paul

  I've recently installed SSMA on my computer and after connecting to both the Oracle instance (which holds the database to be converted) and the SQL Server. I've mapped the needed schemas from oracle to mssql. The problem is that when i click on the report button for the assessment report there's an error popping up: Assesment Error : Nothing to Process The output window states: Starting conversion... Analyzing metadata... Conversion finished with 0 errors, 0 warnings, and 0 informational messages. There is nothing to process. Has anyone got experience with SSMA. I can't figure out what I am doing wrong. Thank you.

  Read the article

• How can I choose a Webapp UI Design/dev collaborative tool?

  - by Cheeso

  I am working with a team that's building a webapp for internal use in an enterprise. It's basically a workflow app at heart, where there's a single "request". Each request flows through various stages, and at each stage, there's a person or role that is responsible for moving the request to the next stage. "Moving" the request to the next stage might involve adding more data, validating things, gathering input from some external source and correlating it to the data in the request, and so on. The workflow engine has been selected. The UI for the various roles and stakeholders is being designed. We have a distributed group of stakeholders. I'd like to employ a collaborative design/dev effort, where devs can produce and stand-up mockups or even working prototypes, then solicit feedback on those things. In a centralized team this could be done via design review meetings, with everyone gathered round a screen projector. That just is not going to work for us. So what I'd like is an app that can help with this. Any recommendations on apps or how to choose?

  Read the article

• How to change resolution in Ubuntu 10.04, where xvinfo is showing no adapters present?

  - by YumYum

  I am trying to maximize my resolution where I have Resolution: 800x600 (4:3) and Refresh rate: 61Hz I tried the following, but it did not work: $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present $ cvt 1920 1080 # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync $ xrandr --newmode clever_name 173.00 1920 2048 2248 2576 1080 1083 1088 1120 $ xrandr -q Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 61.0* 640x480 60.0 clever_name (0x11d) 173.0MHz h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz $ xrandr --addmode default clever_name $ xrandr --output default --mode clever_name xrandr: Configure crtc 0 failed

  Read the article

• Web application interacts bi-directional with server program?

  - by Roelof Berkepeis

  I want to write a web application to play chess against the engine Crafty. I'm not new to PHP and javascript, but must learn how to interact with a server process : how can a web application and/or (jQuery) ajax interact bi-directionally with a (linux) program running on the server? At this moment i am developing on (Apache) local host. Crafty is installed on my Ubuntu PC. This well-known chess engine has no GUI, it runs in terminal by the command $ /usr/games/crafty and so you can play chess against it and even see it's calculations. I can make Crafty run by PHP, using the functions proc_open() or exec(), and most documentation i found states that the output stream should be a file .. But i think i don't want such setup, because then the webpage should be constanty polling that file (eg. by ajax) to see if some new data was appended, right? How can Crafty talk to the web page directly, saying "i have calculated another variation" or "i have decided a move" etc, then display this info on the web page and let the user give some counter move, just like in terminal. Isn't it possible to use some session / stream / listener? I have no clue at all, can anybody point me in a right direction?

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• If your algorithm is correct, does it matter how long it took you to write it?

  - by John Isaacks

  I recently found out that Facebook had a programming challenge that if completed correctly you automatically get a phone interview. There is a sample challenge that asks you to write an algorithm that can solve a Tower of Hanoi type problem. Given a number of pegs and discs, an initial and final configuration; Your algorithm must determine the fewest steps possible to get to the final configuration and output the steps. This sample challenge gives you a 45 minute time limit but allows you to still test your code to see if it passes once your time limit expires. I did not know of any cute math solution that could solve it, and I didn't want to look for one since I think that would be cheating. So I tried to solve the challenge the best I could on my own. I was able to make an algorithm that worked and passed. However, it took me over 4 hours to make, much longer than the 45 minute requirement. Since it took me so much longer than the allotted time, I have not attempted the actual challenge. This got me wondering though, in reality does it really matter that it took me that long? I mean is this a sign that I will not be able to get a job at a place like this (not just Facebook, but Google, Fog Creek, etc.) and need to lower my aspirations, or does the fact that I actually passed on my first attempt even though it took too long be taken as good?

  Read the article

• Implementing new required feature after software release

  - by TiagoBrenck

  Fake Scenario There is a software that was released 1 year ago. The software is to map and register all kind of animals on our planet. When the software was released, the client only needed to know the scientific name of the animal, a flag if it is in risk of extinction and a scale of dangerous(that is a fake software and specification, I don't want to discuss this here). There are already 100.000 animals records saved on DB. New Feature One year later, the client wants a new feature. It is really important to him to know the animals classes, and this is a required field. So he asks me to put a field to input the animal class, and this field is required. Or maybe where this animal was discovered. Problem I have already 100.000 recorded animals without a class or where it was discovered, but I need to insert a new column to storage this information and this column can't be null. I don't have a default value for this situation (there isn't a default animal class or where it was discovered). I don't want to keep the requirement rule only on my software, my DB must have this requirement too(I like to keep business rules on DB too). What are the alternatives to solve this situation? I am on a situation that this new feature cannot be previewed or reviewed for the existing records. The time already passed and I can't go back on time to get it

  Read the article

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

< Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >