Search Results

Search found 31994 results on 1280 pages for 'input output'.

Page 745/1280 | < Previous Page | 741 742 743 744 745 746 747 748 749 750 751 752  | Next Page >

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• PHP include_path doesn't work

  - by 50ndr33

  I have the documents at http://www.example.com/ in /home/www/example.com/www running on Debian Squeeze. /home/www/example.com/ www/ index.php php/ include_me.php In the php.ini I've uncommented and changed to: include_path =".:/home/www/example.com" In a script index.php in www, I have require_once("/php/include_me.php"). The output I am getting from PHP is: Warning: require_once(/php/include_me.php) [function.require-once]: failed to open stream: No such file or directory in /home/www/example.com/www/index.php on line 2 Fatal error: require_once() [function.require]: Failed opening required '/php/include_me.php' (include_path='.:/home/www/example.com') in /home/www/example.com/www/index.php on line 2 As you can see, the include-path is set correctly according to the error. But if I do require_once("../php/include_me.php");, it works. Therefore, something has to be wrong with the include-path. Does anyone know what I can do to fix it?

  Read the article

• The cd command using variable to mapped NFS volume within ssh in linux script is not working

  - by Bhavya Maheshwari

  I have to do the following from within a bash script. The /VMNFS/ folder is present on linux box, from where script is run, and is mapped to the machine into which i am ssh'ing, as an NFS at /vmfs/volumes/VMNFS/. The second cd command doesn't work, neither with symbolic path name nor physical pathname. Why? and How to rectify this? #!/bin/bash ssh -2 [email protected] /bin/sh <<\EOF vmfile_path=`grep / vmvar_file` datastore_path=/vmfs/volumes/VMNFS/ cd $datastore_path && echo "The present working directory is" `pwd -P` esxi_vmfile_path_sub=`pwd -P` && echo "variable value is" $esxi_vmfile_path_sub esxi_vmfile_path=`echo $vmfile_path | sed "s:/VMNFS:$esxi_vmfile_path_sub:"` cd "$esxi_vmfile_path" EOF ***Output***: The current working directory is /vmfs/volumes/65335ec4-46d12e41 variable value is /vmfs/volumes/65335ec4-46d12e41 can't cd to /vmfs/volumes/65335ec4-46d12e41/TPAE7.5/

  Read the article

• TransformXml Task locks config file identified in Source attribute

  - by alexhildyard

  As background: the TransformXml MSBuild task is typically invoked in a custom build step to mark up a web.config file with per-environment configuration; its flexible directives offer highly granular control over the insertion, removal, substitution and transformation of existing configuration hierarchies. For those using the TransformXML task (typically in a Web Deployment Project) I raised an issue against Visual Studio 2010, in which the file handle on the input file was not released, meaning that following transformation the source file remained locked. As a result, the best way to transform a file was first to rename it, transform it, and then copy it back, leaving the "locked" file to be freed up later.I just heard today that this has now been resolved in Visual Studio 2012 RTM. That's good news, because Web Config Transformations offer a lot. An intelligent, automated build process will swap in the relevant transform(s), making it much easier to synthesise the Developer and Build server builds. This makes for a simpler and more exemplary build process, and with the tighter coupling comes a correspondingly quicker response to Developmental change.Oh, and don't forget -- it isn't just web.configs you can transform. You can transform app.configs, or indeed any XML file that honours the task's schema and hierarchical rules.

  Read the article

• Laptop screen turns off on removing power cord

  - by YatharthROCK

  After a recent upgrade to Windows 8.1 Pro from W8, my laptop's screen turns off as soon as you remove the power cord. It turns back on with no issues when you plug the power back in. Keyboard and mouse input is processed while the screen is off. My settings tell the screen to go off after 2 minutes of inactivity on battery. I was having a battery issue from before where my laptop would should down after 5 minutes of running on battery (despite showing 60% left), but I think that's unrelated. Any other info will be provided on request. Can anyone help me figure out what's going on? How can I stop this behaviour?

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• MySQL Server Not Starting on Boot

  - by Brian

  I have installed MySQL on a RHEL 5 server and I'm wanting to set it up so that the server starts on boot. I've ran the "chkconfig --list mysqld" command and it's currently running on levels 3, 4 and 5. However, when I reboot the server, no mysqld process is started. I've also tried manually starting the server by executing "/usr/bin/mysqld_safe" and I get the following output: Starting mysqld daemon with databases from /var/lib/mysql STOPPING server from pid file /var/run/mysqld/mysqld.pid 100319 10:31:30 mysqld ended I looked in /var/log/mysqld.log and I found the following: 100319 10:29:01 mysqld started 100319 10:29:02 InnoDB: Started; log sequence number 0 29752204 100319 10:29:02 [ERROR] Can't start server : Bind on unix socket: Permission denied 100319 10:29:02 [ERROR] Do you already have another mysqld server running on socket: /var/lib/mysql/mysql.sock ? 100319 10:29:02 [ERROR] Aborting

  Read the article

• Default audio device gives an error on WINDOWS 7 (x64) when triing to run VLC from CMD (VideoLAN, VL

  - by Ole Jak

  I use WINDOWS 7 (x64) (Russian) I want to stream life audio from my default audio capture device (microphone) When I set up VLM settings using visual enviroment instruments - VLM settings it all works fine. But when I export created settings/configuration *.vlm file and try to inport it into VLM it gives me nothing I opened that .vlm there is some text... so now I try to run VLC with default settings like this: vlc -i dshow:// --dshow-adev= :sout=#transcode{acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=http,mux=raw,dst=127.0.0.1:8084} but it dies giving me errors...=( So what shall I do to do live MP3 streaming from my default audio input device using VLC in non UI mode?

  Read the article

• How to print lots of Envelopes.

  - by Ian Ringrose

  How to print lots of Envelopes. I wish to print onto lots of envelopes: A few thousand as a one of task (may repeat each year) Good quality colour photo and graphics that has solid colour (plus some black text) Be painless to operate, I don’t wish to have to clear jams often As I need to put the envelopes into batches, I don’t need an input try that will take hundreds of envelopes. I also need to get a new colour printer to print normal A4 paper; this may or may not be the same printer. I live in the UK, if you care. What should I be looking at?

  Read the article

• How to tell if linux disk IO is causing excessive (> 1 second) application stalls

  - by noahz

  I have a Java application performing a large volume (hundreds of MB) of continuous output (streaming plain text) to about a dozen files a ext3 SAN filesystem. Occasionally, this application pauses for several seconds at a time. I suspect that something related to ext3 vsfs (Veritas Filesystem) functionality (and/or how it interacts with the OS) is the culprit. What steps can I take to confirm or refute this theory? I am aware of iostat and /proc/diskstats as starting points. Revised title to de-emphasize journaling and emphasize "stalls" I have done some googling and found at least one article that seems to describe behavior like I am observing: Solving the ext3 latency problem Additional Information Red Hat Enterprise Linux Server release 5.3 (Tikanga) Kernel: 2.6.18-194.32.1.el5 Primary application disk is fiber-channel SAN: lspci | grep -i fibre 14:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter (rev 03) Mount info: type vxfs (rw,tmplog,largefiles,mincache=tmpcache,ioerror=mwdisable) 0 0 cat /sys/block/VxVM123456/queue/scheduler noop anticipatory [deadline] cfq

  Read the article

• Monitoring host and app parameters in real-time

  - by devopsdude42

  I have a bunch of VMs that I need to monitor in real-time. For all nodes I need to watch host parameters like load, network usage and free memory; and for some I need app-specific metrics too, like redis (some vars from the output of INFO command) and nginx (like requests/sec, avg. request time). Ideally I'd also like to track some parameters from the custom apps that run on these node too. These parameters should get tracked as a bunch of line charts on a dashboard. I checked out graphite and it looks suitable (although the UX and aesthetics looks like it needs some love). But setting up and maintaining graphite looks to be a pain, esp. since we don't have a full-time person just for this. Are there any alternatives? Or at least something that is simpler to setup and will scale? Reasonable paid services are also ok.

  Read the article

• Performance issues with new dedicated server [closed]

  - by Pierre Espenan

  I have just subscribed to a new dedicated server and am getting worst than expected PHP execution performance. Execution times are twice as high as on my old mutualized server! I'm definitely not an expert at server management, so I'm wondering what I missed. Here are some stuff that can help you understand what's wrong here : My server (in french but easy to understand) : http://www.online.net/fr/serveur-dedie/dedibox-sc phpinfo(); output : http://jsfiddle.net/E8b7W/embedded/result/ PHP bench script (dedicated server) : http://jsfiddle.net/EhXzK/embedded/result/ PHP bench script (old mutualized) : http://jsfiddle.net/ANbWt/embedded/result/ Is it normal to get such poor performances after a kernel update and basics "apt-get install" for apache2 and php ? Thanks !

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• ATI Radeon HD with Catalyst driver stuck mirroring screens

  - by Mike Axiak

  In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• how to properly implement alpha blending in a complex 3d scene

  - by Gajet

  I know this question might sound a bit easy to answer but It's driving me crazy. There are too many possible situations that a good alpha blending mechanism should handle, and for each Algorithm I can think of there is something missing. these are the methods I've though about so far: first of I though about object sorting by depth, this one simply fails because Objects are not simple shapes, they might have curves and might loop inside each other. so I can't always tell which one is closer to camera. then I thought about sorting triangles but this one also might fail, thought I'm not sure how to implement it there is a rare case that might again cause problem, in which two triangle pass through each other. again no one can tell which one is nearer. the next thing was using depth buffer, at least the main reason we have depth buffer is because of the problems with sorting that I mentioned but now we get another problem. Since objects might be transparent, in a single pixel there might be more than one object visible. So for which Object should I store pixel depth? I then thought maybe I can only store the most front Object depth, and using that determine how should I blend next draw calls at that pixel. But again there was a problem, think about 2 semi transparent planes with a solid plane in middle of them. I was going to render the solid plane at the end, one can see the most distant plane. note that I was going to merge every two planes until there is only one color left for that pixel. Obviously I can use sorting methods too because of the same reasons I've explained above. Finally the only thing I imagine being able to work is to render all objects into different render targets and then sort those layers and display the final output. But this time I don't know how can I implement this algorithm.

  Read the article

• Troubleshooting "connection reset" error on my linux server

  - by Chris

  I fervently hope someone here can help me with the problem I am experiencing. I am a programmer, and I have very little understanding of linux sysadmin terminology/concepts. I am attempting to troubleshoot a problem with my website. It is a Facebook app, and whenever I try to connect using Chrome, I get an error stating that the "connection was reset". I have been Googling for four days straight trying to find a solution to this problem, but no joy. A big part of the problem is that I do not understand the terminology being employed, and the output from many of the tools referenced is likewise indecipherable to me. I am running a VPS with CentOS 5, apache, PHP, and MySQL. I could spam this post with a ton of information from my iptables, apache, etc but if anyone needs information from my server, please let me know how to get it, and I will post it here. Thank you for any help you can offer!

  Read the article

• NVIDIA X Server TwinView isses with 2 GeForce 8600GT cards

  - by Big Daddy

  Full disclosure, I am relatively new to Linux and loving the learning curve but I am undoubtedly capable of ignorant mistakes I have a rig I am building for my home office desktop. The basics: Gigabyte MB AMD 64bt processor Ubuntu 12.04 64bit two Nvidia GeForce 8600GT video cards using a SLI bridge two 22" DVI input HP monitors So here is my issue (it is driving me nuts) with X Server. If I plug both monitors into GPU 0 X Server auto configures TwinView and all is grand, works like a charm, though both are running off of GPU 0. If I plug one monitor into GPU 0 and one monitor into GPU 1, X Server enables the monitor on GPU 0, sees but keeps the monitor on GPU 1 disabled. My presumption (we all know the saying about presumptions) is that all I would have to do is select the disabled monitor on GPU 1 and drop down the Configure pull down and select TwinView...problem is when the monitors are plugged in this way, the TwinView option is greyed out and can not be selected. What am I not understanding here? Is there some sort of configuration I need to do elsewhere for Ubuntu to utilize both GPU's? Any help will be most appreciated, thanks in advance.

  Read the article

• Can't install Ubuntu Software Center

  - by byf-ferdy

  I'm running Ubuntu 13.10 32bit with Gnome 3.8 but am missing the Ubuntu Software Center. I tried to install it via terminal: $ sudo apt-get install software-center But that tells me that dependencies are not met The following packages have unmet dependencies: software-center : Depends: gir1.2-webkit-3.0 but it is not going to be installed gir1.2-webkit-3.0 depends on gir1.2-javascriptcoregtk-3.0 of version 1.10.2-0ubuntu2. But that package is only available as version 2.0.4-2~ubuntu13.04. I am missing the Ubuntu Software Center as well as the Update Manager and the packages update-notifyer and ubuntu-release-upgrader-gtk. How can I install the packages with correct dependencies? Edit: Output of apt-cache policy gir1.2-javascriptcoregtk-3.0: gir1.2-javascriptcoregtk-3.0: Installed: 2.0.4-2~ubuntu13.04.1 Candidate: 2.0.4-2~ubuntu13.04.1 Version table: *** 2.0.4-2~ubuntu13.04.1 0 100 /var/lib/dpkg/status 1.10.2-0ubuntu2 0 500 http://de.archive.ubuntu.com/ubuntu/ saucy/main i386 Packages My sources.list: deb http://de.archive.ubuntu.com/ubuntu/ saucy main restricted universe multiverse deb http://de.archive.ubuntu.com/ubuntu/ saucy-security main restricted universe multiverse deb http://de.archive.ubuntu.com/ubuntu/ saucy-updates main restricted universe multiverse deb http://archive.canonical.com/ubuntu saucy partner deb http://extras.ubuntu.com/ubuntu saucy main # spotify deb http://repository.spotify.com stable non-free Spotify I added myself.

  Read the article

• Colored PS1 string

  - by Will Vousden

  Clarification: I want __foo to be executed each time the PS1 string is presented in the terminal, not when the PS1 string is constructed (hence its being in quotes). __foo contains logic that examines the current directory, so its execution must be deferred. I'm trying to use different colours in my Bash PS1 string from within a Bash function: LIGHTRED="\033[1;31m" LIGHTGREEN="\033[1;32m" RESET="\033[m" __foo () { # Do some stuff and genereate a string to echo in different colours: echo -n '\['$1'\]firstcolour \['$2'\]secondcolour' } PS1='$(__foo '$LIGHTRED' '$LIGHTGREEN')\['$RESET'\] \$' Essentially I want __foo to generate part of the PS1 in a bunch of different colours. My attempt doesn't seem to work, though; it produces the following output: -bash: 31m: command not found -bash: 32m: command not found \[]firstcolour \[\]secondcolour $ What gives, and how can I fix it?

  Read the article

• dpkg in uninterruptible sleep

  - by Khaled

  I have several Ubuntu servers 10.04. Today, I tried to upgrade some packages on one of these servers and the process got stuck. I logged in using another SSH session and I found that dpkg is in D state (uninterruptible sleep). According to what I have read, this state results generally from I/O waiting like waiting for NFS share. I can not understand why dpkg will block in this state. I can not see any obvious problems other than this. Here is the output of ps to show the blocking process: $ ps axo pid,cmd,s,wchan | grep dpkg 22571 /usr/bin/dpkg --status-fd 2 D call_rwsem_down_read_failed This process can not be killed even with kill -9. So, I will not be able to install/upgrade any package unless I reboot the server. What makes it worse is that the remote reboot does not succeed in such a case (having processes in D state). Can anyone help with this? How can I avoid this in the future.

  Read the article

• How to determine if a 3D voxel-based room is sealed, efficiently

  - by NigelMan1010

  I've been having some issues with efficiently determining if large rooms are sealed in a voxel-based 3D rooms. I'm at a point where I have tried my hardest to solve the problem without asking for help, but not tried enough to give up, so I'm asking for help. To clarify, sealed being that there are no holes in the room. There are oxygen sealers, which check if the room is sealed, and seal depending on the oxygen input level. Right now, this is how I'm doing it: Starting at the block above the sealer tile (the vent is on the sealer's top face), recursively loop through in all 6 adjacent directions If the adjacent tile is a full, non-vacuum tile, continue through the loop If the adjacent tile is not full, or is a vacuum tile, check if it's adjacent blocks are, recursively. Each time a tile is checked, decrement a counter If the count hits zero, if the last block is adjacent to a vacuum tile, return that the area is unsealed If the count hits zero and the last block is not a vacuum tile, or the recursive loop ends (no vacuum tiles left) before the counter is zero, the area is sealed If the area is not sealed, run the loop again with some changes: Checking adjacent blocks for "breathable air" tile instead of a vacuum tile Instead of using a decrementing counter, continue until no adjacent "breathable air" tiles are found. Once loop is finished, set each checked block to a vacuum tile. Here's the code I'm using: http://pastebin.com/NimyKncC The problem: I'm running this check every 3 seconds, sometimes a sealer will have to loop through hundreds of blocks, and a large world with many oxygen sealers, these multiple recursive loops every few seconds can be very hard on the CPU. I was wondering if anyone with more experience with optimization can give me a hand, or at least point me in the right direction. Thanks a bunch.

  Read the article

• Can't reach custom C# forms application remotely.

  - by gnucom

  Hello, I'm working in Windows Server 2008. I have a very basic C# forms application (not a service) that is listening on a port, say 56112. When using telnet I can connect from the localhost and send and receive data. For some reason I cannot remotely connect to the application. I know I have a connection because I can telnet to 23 on the remotely fine. I've opened this port on the firewall, created rules in/out in advanced firewall, disabled the firewall completely, and more. Any suggestions would be great! This is the telnet output: Microsoft Telnet> open server.cc 56112 Connecting server.cc...Could not open connection to the host, on port 56112: Connect failed

  Read the article

• Disappearring instances of VertexPositionColor using MonoGame

  - by Rosko

  I am a complete beginner in graphics developing with XNA/Monogame. Started my own project using Monogame 3.0 for WinRT. I have this unexplainable issue that some of the vertices disappear while doing some updates on them. Basically, it is a game with balls who collide with the walls and with each other and in certain conditions they explode. When they explode they disappear. Here is a video demonstrating the issue. I used wireframes so that it is easier to see how vertices are missing. The perfect exploding balls are the ones which are result by user input with mouse clicking. Thanks for the help. The situations is: I draw user primitives with triangle strips using like this graphicsDevice.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.TriangleStrip, circleVertices, 0, primitiveCount); All of the primitives are in the z-plane (z = 0), I thought that it is the culling in action. I tried setting the culling mode to none but it did not help. Here is the code responsible for the explosion private void Explode(GameTime gameTime, ref List<Circle> circles) { if (this.isExploding) { for (int i = 0; i < this.circleVertices.Length; i++) { if (this.circleVertices[i] != this.circleCenter) { if (Vector3.Distance(this.circleVertices[i].Position, this.circleCenter.Position) < this.explosionRadius * precisionCoefficient) { var explosionVector = this.circleVertices[i].Position - this.circleCenter.Position; explosionVector.Normalize(); explosionVector *= explosionSpeed; circleVertices[i].Position += explosionVector * (float)gameTime.ElapsedGameTime.TotalSeconds; } else { circles.Remove(this); } } } } } I'd be really greatful if anyone has suggestions about how to fix this issue.

  Read the article

• Is the Zune HD's audio card better or worse than the iPod touch's?

  - by MatthewThepc

  Firstly, if this is the wrong site to ask this question I apologize, but I didn't see one for "music players" on the stack exchange website :) After reading a few people online say that music playing from a Zune HD sounds better to them than that on an iPod touch, I was wondering whether there's any truth to that? From what I can tell, the Zune HD uses a Wolfson Microelectronics WM8352, while the first-generation iPod Touch (which the Zune HD was competing with) used a Wolfson Microelectronics WM8758BG, and newer models use the Cirrus Logic CS4398 and CS42L61. Which ones are better (to make the question less subjective, let's say in terms of quality, range, & accuracy of output)? Admittedly, I have almost no idea how everything compares and works together, but it would seem to me that, just by looking at the version numbers, the iPod has been better since it's launch. Is there anything else that effects sound quality? Thanks!

  Read the article

• Java: How to Make a Player Class in a Tile-Based RPG

  - by A.K.

  So I've been following a JavaHub tutorial that basically uses a pixel engine similar to MiniCraft. I've attempted to make a Player Class as such, and I'm basically making a mock Pokemon game for learning's sake: package pokemon.entity; import java.awt.Rectangle; import pokemon.gfx.Screen; import pokemon.levelgen.Tile; import pokemon.entity.SpritesManage;; public class Player { int x, y; int vx, vy; public Rectangle AshRec; public Sprite AshSprite; Screen screen; Sprite[][] AshSheet; public Player() { AshSprite = SpritesManage.AshSheet[1][0]; AshRec = new Rectangle(0, 0, 16, 16); x = 0; y = 0; vx = 1; vy = 1; screen.renderSprite(0, 0, AshSprite); } public void update() { move(); checkCollision(); } private void checkCollision() { } private void move() { AshRec.x += vx; AshRec.y += vy; } public void render(Screen screen, int x, int y) { screen.renderSprite(x, y, AshSprite); } } I guess what I really want to do is have the Player centered in the screen and have the sprite drawn based on an Input Handler. I'm just stumped as to how to sync these together.

  Read the article

< Previous Page | 741 742 743 744 745 746 747 748 749 750 751 752  | Next Page >