Search Results

Search found 25811 results on 1033 pages for 'visual studio 2008'.

Page 772/1033 | < Previous Page | 768 769 770 771 772 773 774 775 776 777 778 779  | Next Page >

  • Redirect specific domains with DNS

    - by user66377
    Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

    Read the article

  • DL380 G7: Not able to access ILO on DL380 via ssh from a client

    - by user117140
    I have problem where I can't access my ILO(ssh to ILO IP) thru client which is in different network.I am able to ping ILO IP thru this clinet but ssh access is not possible. Is it possible to have ssh to ILO IP from a client which is in different network? FYI, from the same client I can do ssh to server application IP but ssh to this server ILO IP is not possible. Kindly help? Some more info added: ILO IP address is 10.247.172.70 and its VLAN is different than Client VLAN. Client IP address is 10.247.167.80. ping to ILO IP from this client is possible but not ssh. I can do ssh to ILO IP if I try to do it from the server(hostname:node1) having ILO port or from the other node of this cluster itself,So ssh login is enabled. [root@node1 ~]$ssh -v 10.247.173.70 OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 10.247.173.70 [10.247.173.70] port 22. [root@node1 ~]$ping 10.247.173.70 PING 10.247.173.70 (10.247.173.70) 56(84) bytes of data. 64 bytes from 10.247.173.70: icmp_seq=1 ttl=254 time=0.283 ms 64 bytes from 10.247.173.70: icmp_seq=2 ttl=254 time=0.344 ms 64 bytes from 10.247.173.70: icmp_seq=3 ttl=254 time=0.324 ms 64 bytes from 10.247.173.70: icmp_seq=4 ttl=254 time=0.367 ms

    Read the article

  • Help with memory usage issues on VPS

    - by Niall Collins
    Hi there, I am running a VPS server with 6 .net web sites/applications running on it. I am having issues with performance on the server, mainly it running out of memory. I contacted the company that lease the server to me and they told me it was because I also had sql server 2008 express also running on the server. So I went ahead and removed this, uninstalled etc. However I still seem to be having issues. For example at present, looking at resource consumption, the virtual memory is: ID: vprvmem Current Use: 894,328,832 bytes Limit: 1,073,741,824 bytes This means useage of ~80%. Is there any way I can check out exactly that applications, web sites, software is taking up most of the servers memory, so I can look at rectifying it. I feel that 80% is much to high to allow for contingency for a spike in traffic. I have got extra memory resources added to the box recently, but I would prefer finding the source of the problem rather than throwing extra memory at it. Maybe these levels are correct and alls running ok, but would like to investigate it to make sure. My knowledge of hardware is limited as I mostly deal in the spectrum of software. So any tools out there that can help me or any pertient advice.

    Read the article

  • Run command remotely on Windows computer from C#

    - by Bilal Aslam
    I have a Windows Server 2008 instance on Amazon EC2 (Amazon's cloud compute platform, which provides VMs in the cloud). It has an external IP, and I have an admin account on the box. I would like to 'bootstrap' this instance remotely i.e. I want to run commands to download, install and configure apps on it, all without having to log on even once. Also, I cannot use psexec on the source computer. I have figured out how to do this to a remote, domain-joined computer using WMI. However, I have NOT been able to do for a remote computer on EC2. Here are some specific restrictions: 1) The remote computer is not part of my domain, hence no Kerberos 2) The remote computer does not have a cert I trust, or vice versa I am sure I am running into to some auth/trust restriction. Is there any way I can run a single command on the remote, given that I have admin privileges? I'm not tied down to using WMI, but I do need to run a command somehow. Feels like this should be a solved problem.

    Read the article

  • IIS 7.5 Siteminder is not protecting ASP.net MVC requests

    - by HariM
    We are trying to use ASP.Net MVC with Siteminder for Single Sign on. This is on Windows Server 2008 R2 with IIS 7.5. Siteminder Agent version 6QMR6. Problem : Siteminder protects physical files that are exist. And it is not protecting the folder when we try to access a non existed file. It must redirect to login page even if the file doesn't exist when the user is accessing a protected folder. How to configure in IIS 7.5 that Do not verify a file exist, before authentication by siteminder. SiteMinderWebAgent is a Handler(WildCard Script Map) we created using the ISAPI6WebAgent.dll How to Protect ASP.Net MVC Request with Siteminder? (Added this as My previous question did not solve the problem). MVC Request shows up in IIS Log but not in Siteminder log. Update : Microsoft Support says currently IIS7.5, even in earlier versions doesnt support wildcard mappings on any two Isapi Handlers with * wild card. Currently in my case Siteminder has * wildcard and asp.net mvc (handler is aspnet_isapi) has * wildcard to handle the reqeusts. Ordered priority doesnt work in the wild card mappings case with Just *. Did not convinced with the answer but will wait till tomorrow for them to get back.

    Read the article

  • Pre-startup segmentation fault with ptrace

    - by sfink
    I have somehow managed to mangle my computer so that any time I attempt to use something that uses ptrace to trace another process (eg strace, gdb), I get an immediate segmentation fault. For example: # strace /bin/true execve("/bin/true", ["/bin/true"], [/* 27 vars */]) = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ or with gdb: # gdb /bin/true GNU gdb Fedora (6.8-27.el5) Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu"... (no debugging symbols found) (gdb) run Starting program: /bin/true Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. You can't do that without a process to debug. rpm -V comes up clean on strace, gdb, and glibc. I do not have any LD_* variables set, and PATH has nothing special in it.

    Read the article

  • WinDbg Problem with ntoskrnl

    - by Wilf
    I've got a similar problem to "BSOD - Unable to verify timestamp for ntoskrnl.exe", in that I can't seem to get the correct symbols to read ntoskrnl. I've followed the advice given by BK1E, but still can't get a result. Text from debug below: Loading Dump File [C:\Users\XXXX\AppData\Local\Temp\WER9D78.tmp\Mini030610-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\Windows\Symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Machine Name: Kernel base = 0xfffff800`01e59000 PsLoadedModuleList = 0xfffff800`0201ddd0 Debug session time: Sat Mar 6 14:08:20.516 2010 (UTC + 0:00) System Uptime: 0 days 0:42:01.723 Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols ............................................................... ................................................................ ......................... Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {11, c, 0, fffff80001ec9489} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. How do I fix this issue? OS is Windows Vista x64 SP2.

    Read the article

  • Official end of support date for Internet Explorer 6 on Windows XP

    - by scunliffe
    If I read the docs on Windows Service Pack support policies, and the specific Internet Explorer lifecycle support page as well as the Wikipedia page I've deduced that: IE6 support ends/ended at: Windows 2000 Ended (date unknown) Windows XP SP0 (RTM) Ended Home: 30-Aug-2003 Pro: 30-Sep-2004 SP1 Ended Home: 11-Jul-2004 Pro: 11-Jul-2004 SP2 Home: 13-Jul-2010 Pro: 13-Jul-2010 SP3 (released: April 21, 2008) Home: ??? Pro: ??? What isn't clear is the Windows XP SP3 scenario. In "human" terms, when is the end of support for IE6 on Windows XP SP3? e.g. if there is never a Windows XP SP4... or heaven forbid, an SP4 is released. I realize this doesn't force people to upgrade etc. however I'm trying to get a "semi" official word on when IE6 moves into the "not supported" category. I'm not interested in philosophical answers e.g. "big enterprise won't upgrade but they will expect support into 2017" stuff... I just want the "clear answer" in terms of official Microsoft support.

    Read the article

  • Creating an Apache Virtual Directory, but updating Active Directory DNS

    - by SnoConeGod
    Hello all, I'm just getting started with using the Zend Framework and am following a recommended procedure where I am supposed to create an Apache Virtual Directory for the public-facing portion of a new Zend project. I don't THINK I had any issues creating the Virtual Directory, but my knowledge of the required DNS changes is rather lacking. The dev server I'm using is on a Microsoft Windows Active Directory domain, so I've added A records for both the server name and the subdomain. Still, trying to browse to the site from a Windows 7 PC isn't working properly. What am I missing? What's the proper set of steps for getting an Apache-served subdomain to appear properly in a peer computer's web browser? Details below: server: Debian command-line only, freshly installed today with Zend Server CE LAMP stack server name: ZENDEV subdomain: SQUARE.ZENDEV AD Domain functional level: 2008 mixed (run by a mishmash of 03 and 08 servers) attempting to visit the sites: http://square.zendev and http://square.zendev.domain.local (name of domain redacted, but using the local (not com) suffix) Apache Virtual Directory added to httpd.conf: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot "/var/www/square/public" ServerName square.localhost </VirtualHost> Is this only a problem with DNS? Or with DNS and my Virtual Directory? Thanks! John

    Read the article

  • Need advice on a monitoring, reminder and warning application.

    - by cbmeeks
    I am a developer that also has to monitor several things on different servers. Such as: 1) Did all of the MS SQL databases backup last night? 2) Did all of the MySQL databases backup last night? 3) Were the database dumps actually copied to the right folder? 4) How much free space is left on each server's hard drives? 5) How big are folders "abc", "def", "etc" getting? 6) Send emails/alerts when thresholds are reached Etc. Just basically something to help me NOT forget such important things. I thought about writing something myself but didn't want to waste the effort if something is already out there. I would also prefer one application instead of many if I could. Thanks. EDIT Forgot to mention the operating system. These run on Windows Server 2003 and/or 2008. In fact, what would be cool is a program that supports multiple servers from one machine. Something that can log into those servers.

    Read the article

  • .NET Framework 1.1 on IIS 7

    - by Zack Peterson
    I have inherited a .NET Framework 1.1 web site that I must host with IIS 7 on Windows Server 2008. I'm having some trouble. 1. Installation I installed .NET Framework 1.1 following these instructions. The installation automatically created a new Application Pool "ASP.NET 1.1". I use that. 2. Trouble When I launch the web site I see web.config runtime errors: The tag contains an invalid value for the 'culture' attribute. I fix that one and then see: Child nodes are not allowed. I don't want to keep playing this whack-a-mole game. Something must be wrong. 3. Am I sure this is .NET 1.1? I examine the automatically created application pool. I see that it's 1.1. Advanced Settings... Basic Settings... This doesn't seem right. While 1.1 is set, it's not an option in the Advanced drop down selectors. And why in the Basic box is it just "v1.1" and not ".NET Framework v1.1.4322"? That would be more consistent. 4. I cannot create other .NET 1.1 App Pools I cannot select .NET Framework 1.1 for other application pools. It's not an option in the drop down selectors. What's up with that? What now? Why isn't v1.1 an option for all AppPools? How can I verify my application is in fact using .NET Framework 1.1? Why might I get these runtime errors?

    Read the article

  • What are some techniques to monitor multiple instances of a piece of software?

    - by Geo Ego
    It was recommended that I ask this question here by a member of StackOverflow. I have a piece of self-serve kiosk software that will be running at multiple sites. I'd like to monitor their status remotely. The kiosk application itself is pretty much finished. I am now in the process of creating a piece of software that will monitor all of the kiosks from a central location so that the customer can view particular details remotely (for instance, how many bills are in the acceptor's cash cartridge, what customer is currently logged in, etc.). Because I am in such an early stage of development, my options are quite open. I understand that I'm not giving very many qualifications, but I'd like to try to get a good variety of potential solutions. Some details: Kiosk software is a VB6 app running on Windows Embedded Monitoring software will be run on a modern desktop version of Windows (either XP, Vista, or 7) Database is SQL Server 2008 My initial idea was to develop a .NET app that would simply report the last database transaction for each kiosk at a set interval (say every second or so) but I'd really like for the kiosk software to report its status in real-time. I'm not exactly sure where to begin in terms of what modifications may need to be made to the kiosk software, and what the monitoring software will require. Links to articles on these topics would be most welcome.

    Read the article

  • Have only read access to Samba

    - by Tahir Malik
    Hi I've been struggling a lot with Samba on Centos 5.5 lately. I develop in Windows 7 and send files through scp (ant task), but it's to slow and wanted to setup thoroughly samba. After installing and following some guides I've done the following: Disable firewall (iptables) Disable SelLinux (didn't do that at the start, but didn't help either) setup my smbusers file to map my windows user to root (root = "Tahir Malik" -- works) added a current user mitco to the sambapassdb with the command smbpasswd -a mitco , because the windows user had only read access So both the users have read access to my share. Here is my smb.conf snippit: [global] workgroup = MITCO server string = Samba Server Version %v netbios name = centos ; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24 ; hosts allow = 127. 192.168.12. 192.168.13. [alf4] comment = Alfresco 4 path = /opt read only = no valid users = mitco, mitco force user = root force group = root admin users = mitco , mitco writeable = yes ; browseable = yes What also maybe important is that the /opt is only writable by root, but that shouldn't matter because I use the force user and group or admin users. The log file : [2012/09/29 07:43:44, 0] smbd/server.c:main(958) smbd version 3.0.33-3.39.el5_8 started. Copyright Andrew Tridgell and the Samba Team 1992-2008 [2012/09/29 07:43:59, 1] smbd/service.c:make_connection_snum(1085) mitco-tahir (192.168.13.1) connect to service alf4 initially as user root (uid=0, gid=0) (pid 5228)

    Read the article

  • Why won't dhclient use the static IP I'm telling it to request?

    - by mike
    Here's my /etc/dhcp3/dhclient.conf: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, netbios-name-servers, netbios-scope, interface-mtu; timeout 60; reject 192.168.1.27; alias { interface "eth0"; fixed-address 192.168.1.222; } lease { interface "eth0"; fixed-address 192.168.1.222; option subnet-mask 255.255.255.0; option broadcast-address 255.255.255.255; option routers 192.168.1.254; option domain-name-servers 192.168.1.254; } When I run "dhclient eth0", I get this: There is already a pid file /var/run/dhclient.pid with pid 6511 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:1c:25:97:82:20 Sending on LPF/eth0/00:1c:25:97:82:20 Sending on Socket/fallback DHCPREQUEST of 192.168.1.27 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.1.27 from 192.168.1.254 bound to 192.168.1.27 -- renewal in 1468 seconds. I used strace to make sure that dhclient really is reading that conf file. Why isn't it paying attention to my "reject 192.168.1.27" and "fixed-address 192.168.1.222" lines?

    Read the article

  • Shared printer hosted by Windows 7 to XP peers [closed]

    - by Alistair Knock
    Possible Duplicate: Add Network Printer drivers in Windows 7/Server 2008 R2? A Canon Pixma ip4600 installed all by itself when connected to a Windows 7-64 bit machine. I then updated it with the add-on Canon provide to give additional functionality. I then wish to share it with a box which is running Windows XP 32-bit. The XP box can see the printer but can't find a driver from the 7 machine, which is fine. I ask the 7 machine to get the x86 drivers, but it can't. I install the 32-bit XP drivers on the XP machine, but unlike previous Canon drivers (which unzip to give an .inf file), they assume a local printer and partially give up. I find the .inf file in the Program files\CanonBJ\... directory. Neither the XP machine, nor the 7 machine when the CanonBJ directory is shared to it, is happy with the .inf file. I attempt to install the 32-bit drivers on the 64-bit 7 machine, which, understandably, fail. Where do we go from here? (I apologise for posting in the first-person, I'm not sure why this was)

    Read the article

  • Error when starting .Net-Application from ThinApp-Application

    - by user50209
    one of our customers uses SAP through VMWare ThinApp. In SAP there is a button that launches an .Net application from a server. When starting the .Net-application directly, there is no error. If the user tries to start the application by clicking the button in the ThinApp-Application, it displays the following errors: Microsoft Visual C++ Runtime Library R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information. After clicking "OK" it displays: Microsoft Visual C++ Runtime Library Runtime Error! R6030 - CRT not initialized So, does the customer have to install some components into his ThinApp (if yes, which?) to get things working? Regards, inno ----- [EDIT] ----- @Sean: It's installed the following way: The .exe of the .Net-Application is on a mapped drive on a server. All clients have the requirements installed (.Net-framework for example) and start the .exe from the mapped drive. The ThinApp-Application tries to start this application and throws the mentioned exceptions. AFAIK there are no entry points for this application configured. What I should also mention is: The .Net-Application crashes during execution. That means, we have a debug mode implemented that shows what the application is doing. The application shows what it's doing and after some steps it crashes. The interesting point is: It's a .Net-application, not a C++ Application.

    Read the article

  • Configuring https access on HP A5120 Switch

    - by GerryEgan
    I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

    Read the article

  • SQL Full-Text indexing not populating

    - by Sam
    We installed a clustered SQL 2005 installation on windows 2008 and reattached our san drives from another machine and restored to do a migration to new hardware. There have been a few minor issues, but this one has me stuck. Trying to populate Full-Text indexes is not working. I create a basic table with some simple text in a new database and get the same results as old indexes. 2010-09-27 10:30:46.85 spid19s Informational: Full-text Full population initialized for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'). Population sub-tasks: 1. 2010-09-27 10:31:15.36 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001DF. Attempt will be made to reindex it. 2010-09-27 10:31:15.37 spid19s The component 'MSFTE.DLL' reported error while indexing. Component path 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\MSFTE.DLL'. 2010-09-27 10:31:15.37 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001E0. Attempt will be made to reindex it. The rebuild/repopulate procedure finishes, but I get zero rows in the index. The .dll in the message is present and the service accounts have access to this. My FTData also has data in it, so it seems there wouldn't be permission issue on this folder. Application throws this error: “PHP Warning: mssql_query() [function.mssql-query]: message: Full-text catalog 'ikm_PageIndex_FText' is in an unusable state. Drop and re-create this full-text catalog. (severity 16) in E:\Inetpub\knowledgebase_insidemesa\lib\database\mssql.php on line 154” A microsoft discussion is the only post I found which had claimed to fix this - said it was registry related, but then didn't post the fix.

    Read the article

  • Is there an IE8 setting or policy to make it work like IE7 with respect to persistent connections?

    - by Stephen Pace
    I am working with a commercial application running on XP using IIS 5.1. Periodically the application is returning an IIS error "There are too many people accessing the Web site at this time." This is caused by Microsoft artificially limiting the number of connections (10) under IIS 5.1 under Windows XP, but in this case, there is really only one user (albeit a few tabs open at a time). Microsoft suggests you can reduce the problem by turning off HTTP Keep-Alives for that particular web site: http://support.microsoft.com/kb/262635 If you use IIS 5.0 on Windows 2000 Professional or IIS 5.1 on Microsoft Windows XP Professional, disable HTTP keep-alives in the properties of the Web site. When you do this, a limit of 10 concurrent connections still exists, but IIS does not maintain connections for inactive users. I may do that; however, I'm worried about performance degradation. However, I also notice that IE8 appears to handle this differently than IE7. By default, IE6 and IE7 use 2 persistent connections while IE8 uses 6. Perhaps in this case IE8 itself is generating multiple connections in an attempt to be faster, but those additional connections are overwhelming the artificially limited IIS 5.1 on XP? Assuming that is the case, is there an Internet Explorer option, registry setting, or policy I can set to force IE8 to behave like IE7 with respect to persistent connections? I would not set this for all users, but for the small number of users that used this application, it might solve their intermittent problem until the application can be rehosted on Windows Server 2008. Thanks.

    Read the article

  • Load balanced IIS. Should I use NLB, or linux-based reverse proxy, or something else?

    - by growse
    What would be the best approach for load-balancing at least 2-3 Windows 2008 R2 IIS webservers running a multitude of .NET applications? My choices appear to be: 1) Hardware-based network device load balancer, like a Cisco CSS 2) Windows NLB 3) Some sort of linux based proxy, either haproxy or other The three servers sit as VMs on a vSphere farm, so I have the ability to clone to up the instance count in times of high load. I control the switch that the vSphere hosts are plugged into (Cisco 3750), but don't control the switching/routing infrastructure beyond that to the clients. (1) Is too expensive, and probably overkill for my needs. I've included this in case someone figures out a cunning way to do it on my existing network kit, which I doubt. (2) would seem to be the obvious "built-in" option, but seems to be quite fiddly messing around with network interfaces, multicast, and generally other things that seem to be needlessly complex. It's also fairly stupid, in that it can't remove hosts from the pool if they start throwing 500 errors or otherwise go wrong (3) is the most interesting option, as it would appear to offer the most flexibility and customizability, but without having to mess around with the network. However, while I'm familiar with the reverse-proxy capabilities of lighttpd etc, I'm not that well read on other options like HAProxy, which might be able to offer a lot more. Which would you go for, and is there anything I've not thought of?

    Read the article

  • Active Directory Child Domain Replication Problems

    - by MikeR
    Hi, I've recently inherited an Active Directory (all DCs Windows 2003) which has been configured with several child domains that are used as test environments for out CRM software. Two of these child domains have been used for testing using dates in the future (2015), throwing them well outside of the Kerberos tolerance for time, and they're flooding my event logs with replication errors such as the following: Description: The attempt to establish a replication link for the following writable directory partition failed. Directory partition: CN=Schema,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller: CN=NTDS Settings,CN=TESTDC001,CN=Servers,CN=SiteName,CN=Sites,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller address: 38e95b2a-35af-4174-84ba-9ab039528cce._msdcs.ad.xxxxxxx.com Intersite transport (if any): This domain controller will be unable to replicate with the source domain controller until this problem is corrected. User Action Verify if the source domain controller is accessible or network connectivity is available. Additional Data Error value: 5 Access is denied. I'd also like to upgrade to Windows 2008 at some point, but wouldn't want to attempt any schema updates while I'm not 100% confident on the replication. I'm guessing my only real solution will be to get rid of these child domains. The child domains are operating as stand alone domains, the DC is up and running and authenticating test users fine. I'm guessing the best solution to this would be to delete the domains (although I'd be happily told otherwise). The clock forwarding appears to have been happening for several years, so I'm assuming I can't just put the clock right (I'm guessing scope for this would be 180days, the same as the tombstone lifetime) With the replication errors would I be able to dcpromo the child domains DC, select it as the last domain controller in the domain and the child domain would be deleted? Or would I be better off treating the domain as an orphaned domain and use Microsoft's instructions to clear up as such. Any advice would be much appreciated.

    Read the article

  • Trouble cloning a Macbook Pro hard drive

    - by Mirko Froehlich
    I am trying to upgrade the 250GB hard drive in my MacBook Pro (early 2008 model) to a 750GB drive. I have connected the new drive via an external USB enclosure. The drive is recognized fine, I can format it, etc. However, every time I try to clone the drive, I am getting Input/Output errors. Before the clone operation, I have verified both the internal and the external drive using Disk Utility, and they both check out fine. After the clone operation, the external drive shows multiple "Invalid node structure" errors: I have tried two approaches for cloning the drive: Using Disk Utility, by starting from the OSX install DVD Using Carbon Copy Cloner The outcome is the same in both cases. The Carbon Copy Cloner logs show a handful of the following types of errors: rsync: mkstemp "<... an external filename ...>" failed: Input/output error (5) rsync: stat "<... an external filename ...>" failed: Input/output error (5) The actual files affected seem to be different across different runs of the application. Before the last run, I used Disk Utility to (once more) reformat the external drive and explicitly overwrite it with zeros, but this made no difference. I also tried running a surface scan in Tech Tool Pro overnight. It got about 2/3 of the way through before I had to disconnect the drive (had to take my MacBook Pro to work), but so far it didn't report any bad blocks. Assuming it scans the drive in the same order in which blocks would be allocated during actual use, it seems like if bad blocks were to blame for the clone failures, they should have been found already (given that the source drive is only 250GB). As a last attempt, I may try SuperDuper as well, although my understanding is that it uses the same underlying rsync approach as Carbon Copy Cloner, so it's unlikely to perform any better. Are there any other things I should try before I send the drive in for a replacement? Could these problems be caused by my internal drive, even though it works fine and checks out fine in Disk Utility?

    Read the article

  • User authentication -- username mismatch in IIS in ASP.NET application

    - by Cory Larson
    Last week, an employee's Active Directory username was changed (or a new one was created for them). For the purposes of this example, let's assume these usernames: Old: Domain\11111 New: Domain\22222 When this user now logs in using their new username, and attempts to browse to any one of a number of ASP.NET applications using only Windows Authentication (no Anonymous enabled), the system authenticates but our next layer of database-driven permissions prevents them from being authorized. We tracked it down to a mismatch of usernames between their logon account and who IIS thinks they are. Below are the outputs of several ASP.NET variables from apps running in a Windows 2008 IIS7.5 environment: Request.ServerVariables["AUTH_TYPE"]: Negotiate Request.ServerVariables["AUTH_USER"]: Domain\11111 Request.ServerVariables["LOGON_USER"]: Domain\22222 Request.ServerVariables["REMOTE_USER"]: Domain\11111 HttpContext.Current.User.Identity.Name: Domain\11111 System.Threading.Thread.CurrentPrincipal.Identity.Name: Domain\11111 From the above, I can see that only the LOGON_USER server variable has the correct value, which is the account the user used to log on to their machine. However, we use the "AUTH_USER" variable for looking up the database permissions. In a separate testing environment (completely different server: Windows 2003, IIS6), all of the above variables show "Domain\22222". So this seems to be a server-specific issue, like the credentials are somehow getting cached either on their machine or on the server (the former seems more plausible). So the question is: how do I confirm whether it's the user's machine or the server that is botching the request? How should I go about fixing this? I looked at the following two resources and will be giving the first one a try shortly: http://www.interworks.com/blogs/jvalente/2010/02/02/removing-saved-credentials-passwords-windows-xp-windows-vista-or-windows-7 http://stackoverflow.com/questions/2325005/classic-asp-request-servervariableslogon-user-returning-wrong-username/5299080#5299080 Thanks.

    Read the article

  • how to prevent other computers from seeing our network computers through vpn

    - by Disco
    We have a local office domain consisting of Windows 7 and XP machines that is running on Windows Server 2008 R2. We also have users that connect via VPN into our network. My concern is that when a remote user opens up a folder, the Network section on the left side of the folder shows the remote user all the computer names in our local network. I would like to go about renaming our computers in the local network with more descriptive computer names, but I do not want the users off-site to be able to see these computer names by simply opening up a folder. (Granted, they can already do this, but our current naming scheme does not link computer names to users.) I would like to change our computer names so we can determine which computer belongs to which user more easily IF it can be done securely. How can I ensure that our local computer names are not showing up in the Network folder for remote, VPN-connected users? My online searches have turned up results where people are advised to turn off Network Sharing and Discovery, but that seems to only ensure that the local machine doesn't see other computer names. I want to prevent OUR computer names from showing up on OTHER computers, and I can't go into the VPN-connected computers and turn off THEIR Network Discovery settings. I would think there is a group policy that would control this but I have not found one yet and I don't know how I would apply it to VPN-connected computers. Thanks! EDIT: That's true, a Group Policy wouldn't run on users only connecting via VPN, good point. What about a VPN/router policy, then?

    Read the article

  • How to schedule automatic (daily) snapshots of AWS EC2 Windows Instance?

    - by Stanley
    I have some Windows servers hosted on Amazon EC2. Some run Windows Server 2003 and other run Windows Server 2008. These are EBS-backed instances. Most of the instances also have some additional EBS-volumes attached. We want to schedule a daily snapshot of the windows machines (and also the attached EBS-volumes) to S3 so that we have daily backups available. One would think that this is a very common requirement and would be made available via the AWS Management Console, but alas, it is not. What approaches are available? How do I schedule daily snapshots on our Windows Servers? There are several scripting examples available online for Linux, but not so much for windows. I have had a look at http://sehmer.blogspot.com/2011/04/amazon-ec2-daily-snapshot-script-for.html as well as https://github.com/ronmichael/aws-snapshot-scheduler. Has anyone used one of these approaches and does it work? I have also considered a service like Skeddly which seems inexpensive at first glance but when you look at using it for several servers the price soon escalates to such a point where it seems a better option to create your own solution as you can then apply it to new servers in the future. With Skeddly we'll pay for each server. How do we schedule daily snapshots of our windows instances?

    Read the article

< Previous Page | 768 769 770 771 772 773 774 775 776 777 778 779  | Next Page >