Search Results

Search found 25284 results on 1012 pages for 'test driven'.

Page 779/1012 | < Previous Page | 775 776 777 778 779 780 781 782 783 784 785 786  | Next Page >

• User cannot access a system DSN on Windows Server 2008

  - by Ra Osolage

  We run our SQL Server services using a low privileged domain account. That account is NOT a local admin on the OS. Only access I give the user account is assigned during install of SQL: full control over its mount points and then everything else is granted by the SQL Server 2005/2008 installer. I need to create a linked server in SQL Server 2008 to an ODBC data source. So I remoted into the computer using my domain account, which is part of a group that DOES have local admin privs to the OS. I created a system DSN and configured it to connect to another SQL Server. The DSN works perfectly when I test it. However, when I try to create the linked server, I get an error. It appears to me that the DSN is invisible to the domain account that SQL Server is running as. It seems that this problem is only happening to me on Windows 2008 servers. Does anybody know whether there's anything that you need to do after creating a DSN to make it visible for other users to access?

  Read the article

• Key-Based SSH Permission denied (publickey) Ubuntu 12-04

  - by user125176

  I have configured sshd to accept key-based ssh logins with LogLevel on DEBUG, and uploaded my public key to ~/.ssh.authorized_keys, where permissions are set as: 700 ~/.ssh 600 ~/.ssh/authorized_keys From root, I can su - USERNAME. From the client I get Permission denied (publicly). From the server Here's how it is telling me that it "Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': Permission denied". Client protocol version 2.0; client software version OpenSSH_5.2 match: OpenSSH_5.2 pat OpenSSH* Enabling compatibility mode for protocol 2.0 Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 permanently_set_uid: 105/65534 [preauth] list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth] SSH2_MSG_KEXINIT sent [preauth] SSH2_MSG_KEXINIT received [preauth] kex: client->server aes128-ctr hmac-md5 none [preauth] kex: server->client aes128-ctr hmac-md5 none [preauth] SSH2_MSG_KEX_DH_GEX_REQUEST received [preauth] SSH2_MSG_KEX_DH_GEX_GROUP sent [preauth] expecting SSH2_MSG_KEX_DH_GEX_INIT [preauth] SSH2_MSG_KEX_DH_GEX_REPLY sent [preauth] SSH2_MSG_NEWKEYS sent [preauth] expecting SSH2_MSG_NEWKEYS [preauth] SSH2_MSG_NEWKEYS received [preauth] KEX done [preauth] userauth-request for user USERNAME service ssh-connection method none [preauth] attempt 0 failures 0 [preauth] PAM: initializing for "USERNAME" PAM: setting PAM_RHOST to "USERHOSTNAME" PAM: setting PAM_TTY to "ssh" userauth_send_banner: sent [preauth] userauth-request for user USERNAME service ssh-connection method publickey [preauth] attempt 1 failures 0 [preauth] test whether pkalg/pkblob are acceptable [preauth] Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 Checking blacklist file /etc/ssh/blacklist.RSA-4096 temporarily_use_uid: 1001/1002 (e=0/0) trying public key file /home/USERNAME/.ssh/authorized_keys Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys': Permission denied restore_uid: 0/0 temporarily_use_uid: 1001/1002 (e=0/0) trying public key file /home/USERNAME/.ssh/authorized_keys2 Could not open authorized keys '/home/USERNAME/.ssh/authorized_keys2': Permission denied restore_uid: 0/0 Failed publickey for USERNAME from IPADDRESS port 57523 ssh2 Connection closed by IPADDRESS [preauth] do_cleanup [preauth] monitor_read_log: child log fd closed do_cleanup PAM: cleanup

  Read the article

• Ubuntu 12.04 LDAP SSL self-signed cert not accepted

  - by MaddHacker

  I'm working with Ubuntu 12.04, using OpenLDAP server. I've followed the instructions on the Ubuntu help pages and can happily connect without security. To test my connection, I'm using ldapsearch the command looks like: ldapsearch -xv -H ldap://ldap.[my host].local -b dc=[my domain],dc=local -d8 -ZZ I've also used: ldapsearch -xv -H ldaps://ldap.[my host].local -b dc=[my domain],dc=local -d8 As far as I can tell, I've setup my certificate correctly, but no matter why I try, I can't seem to get ldapsearch to accept my self-signed certificate. So far, I've tried: Updating my /etc/ldap/ldap.conf file to look like: BASE dc=[my domain],dc=local URI ldaps://ldap.[my host].local TLS_CACERT /etc/ssl/certs/cacert.crt TLS_REQCERT allow Updating my /etc/ldap.conf file to look like: base dc=[my domain],dc=local uri ldapi:///ldap.[my host].local uri ldaps:///ldap.[my host].local ldap_version 3 ssl start_tls ssl on tls_checkpeer no TLS_REQCERT allow Updating my /etc/default/slapd to include: SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" Several hours of Googling, most of which resulted in adding the TLS_REQCERT allow The exact error I'm seeing is: ldap_initialize( ldap://ldap.[my host].local ) request done: ld 0x20038710 msgid 1 TLS certificate verification: Error, self signed certificate in certificate chain TLS: can't connect. ldap_start_tls: Connect error (-11) additional info: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed After several hours of this, I was hoping someone else has seen this issue, and/or knows how to fix it. Please do let me know if I should add more information, or if you need further data.

  Read the article

• Mouse wheel in VirtualPC (mostly) does not work on 64-bit Windows 7 RC

  - by JonStonecash

  I have recently upgraded my laptop from WinXP Pro (32-bit) to Windows 7 RC (64-bit). I have a number of VirtualPC 2007 images that I use for testing on various platforms and looking at beta software. I have installed the 64-bit version of VirtualPC. The images all work with the exception of the mouse wheel within the virtual machine. I have tried this out with WinXP Pro, Windows 7 RC, and Windows Server 2008 images. All are 32-bit and all exhibit the same behavior: a gentle rotation of the wheel does nothing; a quick rotation of the wheel sometimes gets a scroll and sometimes not. I regard this behavior as unusable as I tend to use the mouse wheel a lot. All of this worked just fine on WinXP. I have re-installed the Virtual machine additions on all of the machines. The Windows 7 RC virtual image was created after the upgrade to Windows 7 and the 64-bit version of VirtualPC (just to isolate the possibility that I had corrupted the images during the transition). I have googled, binged, and yahoo-ed. There are scattered mentions of this problem (dating back to VPC 2004) but no solutions. I am aware that I could start up one of these images and then use remote desktop connections to get access to that image. I, in fact, do just that for some development that I am doing; the mouse works just fine. This is acceptable in this case because I spend hours at a time in the development VM. These test environments are different in that I will bring up an image for just a short time: minutes rather than hours. Adding the rdc step is much more significant in these cases. Does anyone have any idea of what to do next?

  Read the article

• Gitlab and Nginx not loading gitlab

  - by paperids

  I have just installed gitlab and nginx on Ubuntu LTS 12.04 using this guide: http://blog.compunet.co.za/gitlab-installation-on-ubuntu-server-12-04/ I installed this on another server last night and had absolutely no problems with it (sort of a test run to see how long it would take to get going). I am not getting any errors when restarting gitlab or nginx with /etc/init.d and my error logs are empty. The only thing I know of to go on is the vhost config: upstream gitlab { server unix:/home/gitlab/gitlab/tmp/sockets/gitlab.sock$ } server { listen localhost:80; server_name gitlab.bluringdev.com; root /home/gitlab/gitlab/public; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback$ try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is r$ # then the proxy pass the request to the upsteam (gitla$ location @gitlab { proxy_redirect off; # you need to change this to "https", if you set "ssl" $ proxy_set_header X-FORWARDED_PROTO http; proxy_set_header Host gitlab.bluringdev.com:80; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } } If there's any other information that would be helpful, just let me know and I'll get it up asap.

  Read the article

• NFS "Permission Denied" getting cached on NetApp Filer

  - by Christopher Karel

  We have a bunch of Linux boxes mounting NFS shares off a NetApp filer. From time to time, I will flub some part of the export configuration. Typo on one of the allowed hosts, incorrect IP address, etc, etc. No worries, this is usually done on a test system, or with brand new exports that aren't yet in production. However, I've found that once I've been denied permission to mount something from a Linux machine, the failure gets cached for as long as a day. I will correct the problem that was blocking the mount, re-export on the NetApp, and still not be able to mount the share. I'm pretty sure this caching is done at the NetApp side. It normally ages out after a day or so, but it really sucks having to wait until tomorrow to mount a share. I've tried exportfs -f on the NetApp, as well as dns flush. (I found both suggestions via Google) However, neither one works. I would sell my soul if someone could help out with a command/pagan ritual that would clear up this cache issue. --Christopher Karel

  Read the article

• "Unable to open MRTG log file" error with nagios and mrtg

  - by Simone Magnaschi

  We have a strange issue with our setup of icinga / nagios and mrtg. Icinga is working great and has no problem, it can monitor basically everything without issues. We setup mrtg to gather bandwith data from our routers and switches. MRTG is working fine: it stores the log data in the /var/www/mrtg/ directory and displays the graph data via web. We assume so MRTG is doing great. We tried to setup bandwidth checks in nagios: define service{ use generic-service ; Inherit values from a template host_name zywall-agora service_description ZYWALL AGORA TRAFFICO check_command check_local_mrtgtraf!/var/www/mrtg/x.x.x.x_2.log!AVG!1000000,2000000!5000000,5000000!1000 check_interval 1 ; Check the service every 1 minute under normal conditions retry_interval 1 ; Re-check every minute until its final/hard state is determined } Where /var/www/mrtg/x.x.x.x_2.log is the correct log path file. We keep on getting Unable to open MRTG log file error in the test result in icinga web interface. We tried everything: give ownership to user nagios or icinga to the log file give chmod 777 to the file try to copy the file in another directory and give it full permission Same error. The strange thing is that if we use the command that nagios generate in a bash session the command works like a charm: /usr/lib64/nagios/plugins/check_mrtgtraf -F /var/www/mrtg/x.x.x.x_2.log -a AVG -w 10,20 -c 5000000,5000000 -e 10 Result: Traffic WARNING - Avg. In = 17.9 KB/s, Avg. Out = 5.0 KB/s|in=17.877930KB/s;10.000000;5000000.000000;0.000000 out=5.000000KB/s;20.000000;5000000.000000;0.000000 We ran that command line as root, as user nagios and as user icinga and all three worked ok. We thought that the command that nagios perform maybe has something wrong in it, so we debugged nagios but we found out that the generated command from nagios is the same as above. Searching on google for these kind of problem returns only issues of systems where mrtg is not installed or issues with the wrong path to the log file, but these seems not to be our case. We are stuck, can somebody help?

  Read the article

• DKIM- Filter No Signature Data

  - by Vineet Sharma

  I have installed DKIM-Filter on Postfix after reading this tutorial http://www.unibia.com/unibianet/systems-networking/how-setup-domainkeys-identified-mail-dkim-postfix-and-ubuntu-server My email now has a DKIM signature but still it is landing in the SPAM folder. Here is the header Received-SPF: neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=69.164.193.167; Authentication-Results: mx.google.com; spf=neutral (google.com: 69.164.193.167 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected]; dkim=hardfail (test mode) [email protected] Received: from promote.a2labs.in (localhost [127.0.0.1]) by promote.a2labs.in (Postfix) with ESMTPA id 34858530E8 for <[email protected]>; Mon, 28 Feb 2011 12:23:07 +0530 (IST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=a2labs.in; s=mail; t=1298875987; bh=bo+H1VYPIHMja2u7i1lnzr4k/j4Pe8iSf79bVw94XpI=; h=To:Subject:Message-ID:Date:From:Reply-To:MIME-Version: Content-Type:Content-Transfer-Encoding; b=nhTdlnUwo0iUJ92ycQzKSRjw 5Pfya0DJcJrAc8Mr2hIv8OLpgzBCzdOMWTGqR5nuUmAzgCGYBhYAM2XZwVxo9JG/iz7 oYKysmNQnskFx0TRyW3UOkDWcfHcPnCL6Y7fGzZWinmsyjsg47k+mKZg/e8jqlwTAMO PYKkt5pBz7SM0= Also my mail.err file shows Feb 28 12:17:03 ivineet dkim-filter[32181]: 1F788530E1: no signature data Feb 28 12:18:02 ivineet dkim-filter[32181]: 432BA530E2: no signature data How to fix it

  Read the article

• To install Markdown's extensions by Python

  - by Masi

  The installation notes (git://gitorious.org/python-markdown/mainline.git) say in the file using_as_module.txt One of the parameters that you can pass is a list of Extensions. Extensions must be available as python modules either within the markdown.extensions package or on your PYTHONPATH with names starting with mdx_, followed by the name of the extension. Thus, extensions=['footnotes'] will first look for the module markdown.extensions.footnotes, then a module named mdx_footnotes. See the documentation specific to the extension you are using for help in specifying configuration settings for that extension. I put the folder "extensions" to ~/bin/python/ such that my PYTHONPATH is the following export PYTHONPATH=/Users/masi/bin/python/:/opt/local/Library/Frameworks/Python.framework/Versions/2.6/ The instructions say that I need to import the addons such that import markdown import <module-name> However, I cannot see any module in my Python. This suggests me that the extensions are not available as "python modules - - on [my] PYTHONPATH with names starting with mdx_ - -." How can you get Markdown's extensions to work? 2nd attempt I run at ~/bin/markdown git clone git://gitorious.org/python-markdown/mainline.git python-markdown cd python-markdown python setup.py install I put the folder /Users/masi/bin/markdown/python-markdown/build to my PATH because the installation message suggests me that is the new location of the extensions. I have the following in a test markdown -document [TOC] -- headings here with # -format --- However, I do not get the table of contents. This suggests me that we need to somehow activate the extensions when we compile by the markdown.py -script. **The problem returns to my first quoted text which I is rather confusing to me.

  Read the article

• Tasks not appearing in Mac Outlook 2011

  - by Tama

  My current workplace uses Macs and my old workplaces used Windows. In my old workplaces I heavily used Outlook's Task functionality to manage my workload. I understand that the Task functionality in Outlook 2011 for Mac is heavily limited so I was very pleased to find this useful "how-to" on making the most of Tasks. My problem is that my tasks don't appear in the Task folder, or anywhere else for that matter. Even if I search for a the title of a task I've recently found I still can't find them. After some Googling I found this forum thread that suggests it may be a problem with the Outlook database, which points to a Microsoft KB. So I went through all of the recommended steps on rebuilding/ adding a new identity using the "Microsoft Database Utility" - the theory being that if I create a new identity I can test the task creation using a "blank slate" identity. When I change the default identity to my newly created identity using the Microsoft Database Utility (have to restart the computer) Task creation still doesn't work. Any ideas appreciated, I really miss the task functionality in Outlook 2010 for Windows.

  Read the article

• sendmail.exe: Error during delivery. Service not available, closing transmission channel

  - by user2810332

  I have a module in my system that will trigger an email and send it to user. The email will be sent to user when the product in my system is going to expired soon. I test the whole module in localhost and there is no problem with it. Then, I finally moved the module in my server but it gives this error. sendmail: Error during delivery: Service not available, closing transmission channel. It will also create a notepad in my desktop that contains information like this : command line : C:\wamp\sendmail\sendmail.exe -t -i executable : sendmail.exe exec. date/time : 2011-06-18 01:10 compiled with : Delphi 2006/07 madExcept version : 3.0l callstack crc : $fecf9b34, $5562b2fa, $5562b2fa exception number : 1 exception class : EIdSMTPReplyError exception message : Service not available, closing transmission channel. main thread ($15b0): 0045918a +003e sendmail.exe IdReplySMTP 501 +1 TIdReplySMTP.RaiseReplyError 0043ff28 +0008 sendmail.exe IdTCPConnection 576 +0 TIdTCPConnection.RaiseExceptionForLastCmdResult 004402f4 +003c sendmail.exe IdTCPConnection 751 +10 TIdTCPConnection.CheckResponse 0043feba +002a sendmail.exe IdTCPConnection 565 +2 TIdTCPConnection.GetResponse 004403fd +002d sendmail.exe IdTCPConnection 788 +4 TIdTCPConnection.GetResponse 0045ab97 +0033 sendmail.exe IdSMTP 375 +4 TIdSMTP.Connect 004b5f14 +1060 sendmail.exe sendmail 808 +326 initialization 77013675 +0010 kernel32.dll BaseThreadInitThunk thread $cf8: 77a400e6 +0e ntdll.dll NtWaitForMultipleObjects 77013675 +10 kernel32.dll BaseThreadInitThunk thread $1088: 77a41ecf +0b ntdll.dll NtWaitForWorkViaWorkerFactory 77013675 +10 kernel32.dll BaseThreadInitThunk May I know what is the problem of this error ? Is it something like firewall in the server that block my sendmail.exe or anything else ? FYI, I'm using Wamp and Sendmail to send the email. This is my first time seeing error like this. I need an explanation on this. Thank you.

  Read the article

• SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

  - by Kendall

  Hi, I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. I enable Console Redirection in the BIOS, turn BIOS Redirection after POSt to "disabled". I then modprobe'ed for ipmi_msghandler, ipmi_devintf and ipmi_si. I then found ipmi0 under /dev. So far so good. Since I want console redirection over serial, I modified /boot/grub/menu.lst: http://pastebin.com/YYJmhusQ I then modified "/etc/inittab" as follows: S1:12345:respawn:/sbin/agetty -L 19200 ttyS1 ansi Networking I set as following, using "ipmitool" ipaddr: 192.168.3.164 netmask: 255.255.255.0 defgw: 192.168.3.1 The above are correct for my environment. To test it I do: ipmitool -I open chassis power off which responds by powering off the machine. When I to access from another computer on the network, however, I get an error message: host# ipmitool -I lanplus -H 192.168.10.164 -U Admin -a chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status "Admin" seems to be a valid user name: host# ipmitool -I open user list 1 2 Admin true false true USER The interesting output from ipmitool I initially mentioned: host # ipmitool -I open lan set 1 access on Set Channel Access for channel 1 failed: Request data field length limit exceeded Also, newload4:/home/gjones # ipmitool channel info 1 Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 7154 Get Channel Access (volatile) failed: Request data field length limit exceeded The output of "ipmitool -I open lan print 1" is here: http://pastebin.com/UZyL6yyE Any help/suggestions is greatly appreciated; I've been working with this thing for a few hours now with no success.

  Read the article

• SPF hardfail and DKIM failure when recipient has e-mail forwarding

  - by Beaming Mel-Bin

  I configured hardfail SPF for my domain and DKIM message signing on my SMTP server. Since this is the only SMTP server that should be used for outgoing mail from my domain, I didn't foresee any complications. However, consider the following situation: I sent an e-mail message via my SMTP server to my colleague's university e-mail. The problem is that my colleague forwards his university e-mail to his GMail account. These are the headers of the message after it reaches his GMail mailbox: Received-SPF: fail (google.com: domain of [email protected] does not designate 192.168.128.100 as permitted sender) client-ip=192.168.128.100; Authentication-Results: mx.google.com; spf=hardfail (google.com: domain of [email protected] does not designate 192.168.128.100 as permitted sender) [email protected]; dkim=hardfail (test mode) [email protected] (Headers have been sanitized to protect the domains and IP addresses of the non-Google parties) GMail checks the last SMTP server in the delivery chain against my SPF and DKIM records (rightfully so). Since the last STMP server in the delivery chain was the university's server and not my server, the check results in an SPF hardfail and DKIM failure. Fortunately, GMail did not mark the message as spam but I'm concerned that this might cause a problem in the future. Is my implementation of SPF hardfail perhaps too strict? Any other recommendations or potential issues that I should be aware of? Or maybe there is a more ideal configuration for the university's e-mail forwarding procedure? I know that the forwarding server could possibly change the envelope sender but I see that getting messy.

  Read the article

• CORS Fails on CloudFront Distribution with Nginx Origin

  - by kgrote

  I have a CloudFront distribution set up with an Nginx server as the origin (a Media Temple DV server, to be specific). I enabled the Access-Control-Allow-Origin: * header so fonts will work in Firefox. However, Firefox throws a CORS error for fonts loaded from this CloudFront/Nginx distribution. I created another CloudFront distribution, this time with an Apache server as the origin, and set Access-Control-Allow-Origin: * also. Firefox displays fonts from this origin without issue. I've set up a demo page here: http://kristengrote.com/cors-test/ When I perform a curl request for the same font file from each distribution, both files return almost exactly the same headers: Apache Origin Nginx Origin ——————————————————— ——————————————————— HTTP/1.1 200 OK HTTP/1.1 200 OK Server: Apache Server: nginx Content-Type: application/font-woff Content-Type: application/font-woff Content-Length: 25428 Content-Length: 25428 Connection: keep-alive Connection: keep-alive Date: Wed, 11 Jun 2014 23:23:09 GMT Date: Wed, 11 Jun 2014 23:15:23 GMT Last-Modified: Tue, 10 Jun 2014 22:15:56 GMT Last-Modified: Tue, 10 Jun 2014 22:56:09 GMT Accept-Ranges: bytes Accept-Ranges: bytes Cache-Control: max-age=2592000 Cache-Control: max-age=2592000 Expires: Fri, 11 Jul 2014 23:23:09 GMT Expires: Fri, 11 Jul 2014 23:15:23 GMT Access-Control-Allow-Origin: * Access-Control-Allow-Origin: * Access-Control-Allow-Methods: GET, HEAD Access-Control-Allow-Methods: GET, HEAD Access-Control-Allow-Headers: * Access-Control-Allow-Headers: * Access-Control-Max-Age: 3000 Access-Control-Max-Age: 3000 X-Cache: Hit from cloudfront X-Cache: Hit from cloudfront Via: 1.1 210111ffb8239a13be669aa7c59f53bd.cloudfront.net (CloudFront) Via: 1.1 fa0dd57deefe7337151830e7e9660414.cloudfront.net (CloudFront) X-Amz-Cf-Id: QWucpBoZnS3B8E1mlXR2V5V-SVUoITCeVb64fETuAgNuGuTLnbzAhw== X-Amz-Cf-Id: E2Z3VOIfR5QPcYN1osOgvk0HyBwc3PxrFBBHYdA65ZntXDe-srzgUQ== Age: 487 X-Accel-Version: 0.01 X-Powered-By: PleskLin X-Robots-Tag: noindex, nofollow So the only conclusion I can draw is that something about Nginx is preventing Firefox from recognizing CORS and allowing the fonts via CloudFront. Any ideas on what the heck is happening here?

  Read the article

• Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

  - by ip

  Hi, My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

  Read the article

• Why are UDP messages from outside the network received but not delivered?

  - by Warren Pena

  I have an Ubuntu Server 10.04 application I've developed that receives messages over a UDP port. The ultimate purpose of this application is to receive messages sent from workers' 3G modems out in the field. If use netcat on either another ubuntu Server or my Vista laptop (both on the same LAN as my test machine) to send a message, the message arrives correctly and appears in my application. However, if I go out to my car and use its 3G modem to send a message from the same Vista laptop, it doesn't work. If I run tcpdump -A, I see the message arrive correctly, but it's never delivered to my application. Clearly, the OS is the one making the choice not to deliver the messages (else they wouldn't appear in tcpdump nor would my app receive them when coming from local machines). I have not installed any firewall software on this machine, nor am I aware of anything installed by default that would block the traffic. sudo iptables --list returns Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I'm not too familiar with iptables, but it looks to me like that's telling it to not do anything. What could be going on that's preventing my messages from being delivered?

  Read the article

• Where to get glib-config for Kubuntu?

  - by Carl Smotricz

  I'm trying to compile Midnight Commander on a KUbuntu 9.10 (Karmic) box with no root access. I've set up a directory under $HOME, downloaded the mc source package and various stuff required for building, such as autotools. I've unpacked the CONTENTS of all those packages into this working directory such that I have the usual ./usr, ./lib, ./etc hierarchy. I manage to get configure through a lot of tests, but I can't seem to fool it into finding glib. checking for glib-2.0... checking for glib-config... no checking for glib12-config... no checking for glib-config... no checking for GLIB - version >= 1.2.6... no *** The glib-config script installed by GLIB could not be found *** If GLIB was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GLIB_CONFIG environment variable to the *** full path to glib-config. configure: error: Test for glib failed. GNU Midnight Commander requires glib 1.2.6 or above. My system has glib installed: /lib/libglib-2.0.so.0 /lib/libglib-2.0.so.0.2200.3 ... and I've also downloaded and unpacked the glib package into my working directory: libglib2.0-0_2.22.2-0ubuntu1_i386.deb libglib2.0-dev_2.22.2-0ubuntu1_i386.deb ... but still the elusive glib-config is nowhere to be found. It's not in any debian package for Karmic, either. So I'd appreciate any help getting over this hurdle. Please note, again, that I don't have root, so I can't just merrily apt-get stuff.

  Read the article

• Reverse SSH Tunnel

  - by chris

  I am trying to forward web traffic from a remote server to my local machine in order to test out some API integration (tropo, paypal, etc). Basically, I'm trying to setup something similar to what tunnlr.com provides. I've initiated the ssh tunnel with the command $ssh –nNT –R :7777:localhost:5000 user@server Then I can see that server has is now listening on port 7777 with user@server:$netstat -ant | grep 7777 tcp 0 0 127.0.0.1:7777 0.0.0.0:* LISTEN tcp6 0 0 ::1:7777 :::* LISTEN $user@server:curl localhost:7777 Hello from local machine So that works fine. The curl request is actually served from the local machine. Now, how do I enable server.com:8888 to be routed through that tunnel? I've tried using nginx like so: upstream tunnel { server 0.0.0.0:7777; } server { listen 8888; server_name server.com; location / { access_log /var/log/nginx/tunnel-access.log; error_log /var/log/nginx/tunnel-error.log; proxy_pass http://tunnel; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } From the nginx error log I see: [error] 11389#0: *1 connect() failed (111: Connection refused) I've been looking at trying to use iptables, but haven't made any progress. iptables seems like a more elegant solution than running nginx just for tunneling. Any help is greatly appreciated. Thanks!

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

• Configuration management in support of scientific computing

  - by Sharpie

  For the past few years I have been involved with developing and maintaining a system for forecasting near-shore waves. Our team has just received a significant grant for further development and as a result we are taking the opportunity to refactor many components of the old system. We will also be receiving a new server to run the model and so I am taking this opportunity to consider how we set up the system. Basically, the steps that need to happen are: Some standard packages and libraries such as compilers and databases need to be downloaded and installed. Some custom scientific models need to be downloaded and compiled from source as they are not commonly provided as packages. New users need to be created to manage the databases and run the models. A suite of scripts that manage model-database interaction needs to be checked out from source code control and installed. Crontabs need to be set up to run the scripts at regular intervals in order to generate forecasts. I have been pondering applying tools such as Puppet, Capistrano or Fabric to automate the above steps. It seems perfectly possible to implement most of the above functionality except there are a couple usage cases that I am wondering about: During my preliminary research, I have found few examples and little discussion on how to use these systems to abstract and automate the process of building custom components from source. We may have to deploy on machines that are isolated from the Internet- i.e. all configuration and set up files will have to come in on a USB key that can be inserted into a terminal that can connect to the server that will run the models. I see this as an opportunity to learn a new tool that will help me automate my workflow, but I am unsure which tool I should start with. If any member of the community could suggest a tool that would support the above workflow and the issues specific to scientific computing, I would be very grateful. Our production server will be running Linux, but support for OS X would be a bonus as it would allow the development team to setup test installations outside of VirtualBox.

  Read the article

• apache vhost not working consistently

  - by petrus

  I have a vhost on my webserver whose sole and unique goal is to return the client IP adress: petrus@bzn:~$ cat /home/vhosts/domain.org/index.php <?php echo $_SERVER['REMOTE_ADDR']; echo "\n" ?> This helps me troubleshoot networking issues, especially when NAT is involved. As such, I don't always have domain name resolution and this service needs to work even if queried by its IP address. I'm using it this way: petrus@hive:~$ echo "GET /" | nc 88.191.124.41 80 191.51.4.55 petrus@hive:~$ echo "GET /" | nc domain.org 80 191.51.4.55 router#more http://88.191.124.41/index.php 88.191.124.254 However I found that it wasn't working from at least a computer: petrus@seth:~$ echo "GET /" | nc domain.org 80 petrus@seth:~$ petrus@seth:~$ echo "GET /" | nc 88.191.124.41 80 petrus@seth:~$ What I checked: This is not related to ipv6: petrus@seth:~$ echo "GET /" | nc -4 ydct.org 80 petrus@seth:~$ petrus@hive:~$ echo "GET /" | nc ydct.org 80 2a01:e35:ee8c:180:21c:77ff:fe30:9e36 netcat version is the same (except platform, i386 vs x64): petrus@seth:~$ type nc nc est haché (/bin/nc) petrus@seth:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@seth:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2010-06-26 14:01 /etc/alternatives/nc -> /bin/nc.openbsd petrus@hive:~$ type nc nc est haché (/bin/nc) petrus@hive:~$ file /bin/nc /bin/nc: symbolic link to `/etc/alternatives/nc' petrus@hive:~$ ls -l /etc/alternatives/nc lrwxrwxrwx 1 root root 15 2011-05-26 01:23 /etc/alternatives/nc -> /bin/nc.openbsd It works when used without the pipe: petrus@seth:~$ nc domain.org 80 GET / 2a01:e35:ee8c:180:221:85ff:fe96:e485 And the piping works at least with a test service (netcat listening on 1234/tcp and output to stdout) petrus@bzn:~$ nc -l -p 1234 GET / petrus@bzn:~$ petrus@seth:~$ echo "GET /" | nc domain.org 1234 petrus@seth:~$ I don't know if this issue is more related to netcat or Apache, but I'd appreciate any pointers to troubleshoot this issue ! The IP addresses have been modified but kept consistent for easy reading. bzn is the server, hive is a working client and seth is the client on which I have the issue.

  Read the article

• PECL install error after upgrading to OSX 10.8

  - by Clive

  I've just upgraded my OS to Mountain Lion and PECL is no longer working (it's on a test drive so no drama, but I'd like to get it working so I can upgrade the OS on my shiny new SSD as well). I'm using the native PHP installation, no macports/homebrew or anything like that. Running sudo pecl install uploadprogress (for example) produces the following terminal output: downloading uploadprogress-1.0.3.1.tgz ... Starting to download uploadprogress-1.0.3.1.tgz (9,040 bytes) .....done: 9,040 bytes 4 source files, building running: phpize grep: /usr/include/php/main/php.h: No such file or directory grep: /usr/include/php/Zend/zend_modules.h: No such file or directory grep: /usr/include/php/Zend/zend_extensions.h: No such file or directory Configuring for: PHP Api Version: Zend Module Api No: Zend Extension Api No: autom4te: need GNU m4 1.4 or later: /usr/bin/m4 ERROR: `phpize' failed I'm guessing the problem is the 3 grep lines. I've found several threads that suggest this is caused by XCode not being installed...but XCode is installed, and updated to the latest version (4.4). All the relevant symlinks to /Developer/usr/bin/* also exist as they should. m4 is currently at version: m4 (GNU M4) 1.4.13, so even though the output above contains a line pertaining to it, I don't think that can be the problem. I'm sure it's just a simple issue, anyone got any clues?

  Read the article

• DrayTek 2820 configuration using public IP addresses

  - by Kev

  I have a /29 range of public IP addresses assigned to me by my ISP. I'm trying to configure a SIP VOIP handset to register with my VOIP provider who recommend using public IP addresses rather than NAT. I have a DrayTek 2820 router flashed with the latest firmware and have configured my router as per DrayTek's FAQ at: How do I use a public subnet on the LAN (non-NAT operation ) ? My IP range is: xx.xx.94.16 -> xx.xx.94.23 This gives a usable range of: xx.xx.94.17 -> xx.xx.94.22 My router's public IP address is: xx.xx.94.17, the SIP VOIP handset is allocated xx.xx.94.18. I have a second internet connection and via that I can ping the handset. However for some reason I can't seem to get it to register with the provider. I tried adding a new Firewall filter to pass through from WAN to LAN: Source: ANY, Destination: xx.xx.94.18, UDP - Ports 1024 -> 65535 Out of interest I also tried opening port 80 to see if I could browse to the phone's admin web interface but no joy. I know that my ISP aren't blocking inbound service ports because I NAT Port Forwarded port 80 to one of my internal web servers and it rendered a test page I had set up. All the NAT settings are reset to factory defaults, i.e. there are no Port Redirection, DMZ Host, Open Ports or Address Mappings configured. The handset I'm using is a GrandStream GXP-2000. Is there anything else I should be doing?

  Read the article

• mysqladmin - Unknown MySQL server host

  - by ert

  I'm trying to connect to a mysql server over a local network. The server is running and listening to post 41322. dylan~$ netstat -ln | s mysql unix 2 [ ACC ] STREAM LISTENING 41322 /var/run/mysqld/mysqld.sock My user is granted all rights from all addresses, and I can log in locally. dylan~$ mysqladmin -P 41322 -h [email protected] create database test mysqladmin: connect to server at '[email protected]' failed error: 'Unknown MySQL server host '[email protected]' (1)' Check that mysqld is running on [email protected] and that the port is 41322. You can check this by doing 'telnet [email protected] 41322' Adding a --verbose flag gives no additional output. I've commented out bind-address=127.0.0.1 in /etc/mysql/my.cnf on the server. I can ssh into the server without a problem. dylan~$ ps a | grep mysql 11131 pts/3 S 0:00 /bin/sh /usr/bin/mysqld_safe 11170 pts/3 Sl 0:03 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock 11171 pts/3 S 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld 13710 pts/1 S+ 0:00 grep mysq Any help or thoughts are appreciated.

  Read the article

• Nginx + uWSGI on a fresh Ubuntu install - bind error port 80

  - by knuckfubuck

  I know this is a common problem usually having to do with apache or another service already running on port 80 and I have done a lot of searching and running netstat and still have not figured out why I am getting this error. I rebuilt my slice, did a fresh install of Ubuntu 10.04 and setup nginx + uwsgi. It worked and I was able to see my Django site. I then installed Postgres8.4 and the rest of the stack needed for Geodjango from this link. After that was done I tried to restart nginx and I get this error: sudo /etc/init.d/nginx start Starting nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok configuration file /usr/local/nginx/conf/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: still could not bind() I have nginx set to listen 80. Here's an output from netstat -l --numeric-ports | grep 80: tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8000 0.0.0.0:* LISTEN Output from sudo lsof +M -i4: nginx 2330 root 8u IPv4 3195 0t0 TCP *:www (LISTEN) nginx 2331 www-data 8u IPv4 3195 0t0 TCP *:www (LISTEN) uwsgi 2335 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2352 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2353 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2354 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2355 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) Anyone have any other ideas how I can figure out what is blocking port 80? edit Paste of my /etc/init.d/nginx script here: http://dpaste.com/hold/400937/

  Read the article

< Previous Page | 775 776 777 778 779 780 781 782 783 784 785 786  | Next Page >