Search Results

Search found 22308 results on 893 pages for 'floating point'.

Page 780/893 | < Previous Page | 776 777 778 779 780 781 782 783 784 785 786 787  | Next Page >

  • How to Mentor a Junior Developer

    - by Josh Johnson
    This title is a little broad but I may need to give a little background before I can ask my question properly. I know that similar questions have been asked here already. But in my case I'm not asking if I should be mentoring someone or if the person is a good fit for being a software developer. That is not my place to judge. I have not been asked outright, but it is apparent that myself and other fellow senior developers are to mentor the new developers that start here. I have no problem with this whatsoever and, in many cases, it lends me a fresh perspective on things and I end up learning in the process. Also, I remember how beneficial it was in the beginning of my career when someone would take some time to teach me something. When I say "new developer" they could be anywhere from fresh out of college to having a year or two of experience. Recently and in the past we've had people start here who seem to have an attitude toward development/programming which is different from mine and hard for me to reconcile; they seem to extract just enough information to get the task done but not really learn from it. I find myself going over and over the same issues with them. I understand that part of this could be a personality thing, but I feel it's my job to do my best and sort of push them out of the nest while they're under my wing, so to speak. How can I impart just enough information so that they will learn but not give so much as to solve the problem for them? Or perhaps: What's the proper response to questions that are designed to take the path of least resistance and, in essence, force them to learn instead of take the easy way out? These questions are probably more general teaching questions and don't have that much to do specifically with software development. Note: I do not get a say in what tasks they are working on. Management doles the task out and it could be anything from a very simple bug fix to starting an entire application by themselves. While this is not ideal by any means and obviously presents its own gauntlet of challenges, I feel it's a topic best left for another question. So the best I can do is help them with the problem at hand and try to help them break it down into simpler problems and also check their commit logs and point out mistakes that they made. My main objectives are to: Help them out and give them the tools they need to start becoming more self-reliant. Steer them in the right direction and break bad development habits early on. Lessen the amount of time I spend with them (the personality type described above seems to need much more one-on-one time and does not do well over IM or email. While that's generally fine, I can't always stop what I'm working on, break my stride, and help them debug an error on a moments notice; I have my own projects that need to get done).

    Read the article

  • Sweet and Sour Source Control

    - by Tony Davis
    Most database developers don't use Source Control. A recent anonymous poll on SQL Server Central asked its readers "Which Version Control system do you currently use to store you database scripts?" The winner, with almost 30% of the vote was...none: "We don't use source control for database scripts". In second place with almost 28% of the vote was Microsoft's VSS. VSS? Given its reputation for being buggy, unstable and lacking most of the basic features required of a proper source control system, answering VSS is really just another way of saying "I don't use Source Control". At first glance, it's a surprising thought. You wonder how database developers can work in a team and find out what changed, when the system worked before but is now broken; to work out what happened to their changes that now seem to have vanished; to roll-back a mistake quickly so that the rest of the team have a functioning build; to find instantly whether a suspect change has been deployed to production. Unfortunately, the survey didn't ask about the scale of the database development, and correlate the two questions. If there is only one database developer within a schema, who has an automated approach to regular generation of build scripts, then the need for a formal source control system is questionable. After all, a database stores far more about its metadata than a traditional compiled application. However, what is meat for a small development is poison for a team-based development. Here, we need a form of Source Control that can reconcile simultaneous changes, store the history of changes, derive versions and builds and that can cope with forks and merges. The problem comes when one borrows a solution that was designed for conventional programming. A database is not thought of as a "file", but a vast, interdependent and intricate matrix of tables, indexes, constraints, triggers, enumerations, static data and so on, all subtly interconnected. It is an awkward fit. Subversion with its support for merges and forks, and the tolerance of different work practices, can be made to work well, if used carefully. It has a standards-based architecture that allows it to be used on all platforms such as Windows Mac, and Linux. In the words of Erland Sommerskog, developers should "just do it". What's in a database is akin to a "binary file", and the developer must work only from the file. You check out the file, edit it, and save it to disk to compile it. Dependencies are validated at this point and if you've broken anything (e.g. you renamed a column and broke all the objects that reference the column), you'll find out about it right away, and you'll be forced to fix it. Nevertheless, for many this is an alien way of working with SQL Server. Subversion is the powerhouse, not the GUI. It doesn't work seamlessly with your existing IDE, and that usually means SSMS. So the question then becomes more subtle. Would developers be less reluctant to use a fully-featured source (revision) control system for a team database development if they had a turn-key, reliable system that fitted in with their existing work-practices? I'd love to hear what you think. Cheers, Tony.

    Read the article

  • JavaOne Latin America 2012 Trip Report

    - by reza_rahman
    JavaOne Latin America 2012 was held at the Transamerica Expo Center in Sao Paulo, Brazil on December 4-6. The conference was a resounding success with a great vibe, excellent technical content and numerous world class speakers. Some notable local and international speakers included Bruno Souza, Yara Senger, Mattias Karlsson, Vinicius Senger, Heather Vancura, Tori Wieldt, Arun Gupta, Jim Weaver, Stephen Chin, Simon Ritter and Henrik Stahl. Topics covered included the JCP/JUGs, Java SE 7, HTML 5/WebSocket, CDI, Java EE 6, Java EE 7, JSF 2.2, JMS 2, JAX-RS 2, Arquillian and JavaFX. Bruno Borges and I manned the GlassFish booth at the Java Pavilion on Tuesday and Webnesday. The booth traffic was decent and not too hectic. We met a number of GlassFish adopters including perhaps one of the largest GlassFish deployments in Brazil as well as some folks migrating to Java EE from Spring. We invited them to share their stories with us. We also talked with some key members of the local Java community. Tuesday evening we had the GlassFish party at the Tribeca Pub. The party was definitely a hit and we could have used a larger venue (this was the first time we had the GlassFish party in Brazil). Along with GlassFish enthusiasts, a number of Java community leaders were there. We met some of the same folks again at the JUG leader's party on Wednesday evening. On Thursday Arun Gupta, Bruno Borges and I ran a hands-on-lab on JAX-RS, WebSocket and Server-Sent Events (SSE) titled "Developing JAX-RS Web Applications Utilizing Server-Sent Events and WebSocket". This is the same Java EE 7 lab run at JavaOne San Francisco. The lab provides developers a first hand glipse of how an HTML 5 powered Java EE application might look like. We had an overflow crowd for the lab (at one point we had about twenty people standing) and the lab went very well. The slides for the lab are here: Developing JAX-RS Web Applications Utilizing Server-Sent Events and WebSocket from Reza Rahman The actual contents for the lab is available here. Give me a shout if you need help getting it up and running. I gave two solo talks following the lab. The first was on JMS 2 titled "What’s New in Java Message Service 2". This was essentially the same talk given by JMS 2 specification lead Nigel Deakin at JavaOne San Francisco. I talked about the JMS 2 simplified API, JMSContext injection, delivery delays, asynchronous send, JMS resource definition in Java EE 7, standardized configuration for JMS MDBs in EJB 3.2, mandatory JCA pluggability and the like. The session went very well, there was good Q & A and someone even told me this was the best session of the conference! The slides for the talk are here: What’s New in Java Message Service 2 from Reza Rahman My last talk for the conference was on JAX-RS 2 in the keynote hall. Titled "JAX-RS 2: New and Noteworthy in the RESTful Web Services API" this was basically the same talk given by the specification leads Santiago Pericas-Geertsen and Marek Potociar at JavaOne San Francisco. I talked about the JAX-RS 2 client API, asyncronous processing, filters/interceptors, hypermedia support, server-side content negotiation and the like. The talk went very well and I got a few very kind complements afterwards. The slides for the talk are here: JAX-RS 2: New and Noteworthy in the RESTful Web Services API from Reza Rahman On a more personal note, Sao Paulo has always had a special place in my heart as the incubating city for Sepultura and Soulfy -- two of my most favorite heavy metal musical groups of all time! Consequently, the city has a perpertually alive and kicking metal scene pretty much any given day of the week. This time I got to check out a solid performance by local metal gig Republica at the legendary Manifesto Bar. I also wanted to see a Dio Tribute at the Blackmore but ran out of time and energy... Overall I enjoyed the conference/Sao Paulo and look forward to going to Brazil again next year!

    Read the article

  • Impressions on jQuery Mobile

    - by Jeff
    For the uninitiated, jQuery Mobile is a sweet little client framework that turns regular HTML into something more touch and mobile friendly. It results in a user interface that has bigger targets, rounded corners and simple skinning capability. When it was announced that ASP.NET MVC 4 would include support for a mobile-sensitive view engine, offering up alternate views for clients that fit the mobile profile, I was all over that. Combined with jQuery Mobile, it brought a chance to do some experimentation. I blitzed through the views in POP Forums and converted them all to mobile views. (For the curious, this first pass can be found here on CodePlex, while a more recent update that uses RC 2 of jQuery Mobile v1.1.0 is running on the demo site.) Initially, it was kind of a mixed bag. The jQuery demo site also acts as documentation, and it’s reasonably complete. I had no problem getting up a lot of basic views quickly, splitting out portions of some pages as subpages that they quickly load in. The default behavior in the older version was to slide the pages in, which looked a little weird when you were using a back button. They’ve since changed it so the default transition is a fade in/out. Because you’re dealing with Web pages, I don’t think anyone is really under the illusion that you’re not using a native app, so I don’t know that this matters. I’ve tested extensively on iPad and Windows Phone, and to be honest, I’ve encountered a lot of issues. On Windows Phone, there is some kind of inconsistency that prevents the proper respect for the viewport settings. The text background on text fields (for labeling) doesn’t work, either. On both platforms, certain in-DOM page navigation links work only half of the time. Is this an issue of user error? Probably, but that’s what’s frustrating about it. Most of what you accomplish with this framework involves decorating various elements with CSS classes. There isn’t any design-time safety to speak of to make sure that you’re doing it right. I think the issues can be overcome, but there are some trade-offs to consider. The first is download size. Yes, the scripts and CSS do get cached, but that first hit will cost nearly 40k for the mobile parts. That’s still a lot when you’re on some crappy AT&T EDGE network, or hotel Wi-Fi. Then you have to ask yourself, do you really want your app to look like it’s native to iOS? I’m not saying that’s a bad thing, because consistent UI is good, but you will end up feeling a whole lot of sameness, and maybe you don’t want that. I did some experimentation to try and Metro-ize the jQuery Mobile theme, and it’s kind of a mixed bag. It mostly works, but you get some weirdness on badges and with buttons that I’m not crazy about. It probably just means you need to keep tweaking. At this point, I’m a little torn about whether or not I’ll use it for POP Forums or one of the sites I’m working on. The benefits are pretty strong, but figuring out where I’m doing it wrong is proving a little time consuming.

    Read the article

  • Seamless STP with Oracle SOA Suite

    - by user12339860
    STP stands for “Straight Through Processing”. Wikipedia describes STP as a solution that enables “the entire trade process for capital markets and payment transactions to be conducted electronically without the need for re-keying or manual intervention, subject to legal and regulatory restrictions” .I will deal with the later part of the definition i.e “payment transactions without manual intervention” in this article. The STP that I am writing about involves the interaction between a Bank and its’ corporate customers,to that extent this business case is also called “Corporate Payments”.Simply put a  Corporate Payment-STP solution needs to connect the payment transaction right from the Corporate ERP into the Bank’s Payment Hub. A SOA based STP solution can do a lot more than just process transaction. But before I get to the solution let me describe the perspectives of the two primary parties in this interaction. The Corporate customer and the Bank. Corporate's Interaction with Bank:  Typically it is the treasury department of an enterprise which interacts with the Bank on a daily basis. Here is how a day of interaction would look like from the treasury department of a corp. Corporate Cash Retrieve Beginning of day totals Monitor Cash Accounts Send or receive cash between accounts Supply chain payments Payment Settlements Calculate settlement positions Retrieve End of Day totals Assess Transaction Financial Impact Short Term Investment Desk Retrieve Current Account information Conduct Investment activities Bank’s Interaction with the Corporate :  From the Bank’s perspective, the interaction starts from the point of on boarding a corporate customer to billing the corporate for the value added services it provides. Once the corporate is on-boarded the daily interaction involves Handle the various formats of data arriving from customers Process Beginning of Day & End of Day reporting request from customers Meet compliance requirements Process Payments Transmit Payment Status Challenges with this Interaction :  Both the Bank & the Corporate face many challenges from these interactions. Some of the challenges include Keeping a consistent view of transaction data for various LOBs of the corporate & the Bank Corporate customers use different ERPs, hence the data formats are bound to be different Can the Bank’s IT systems convert the data formats that can be easily mapped to the corporate ERP How does the Bank manage the communication profiles of these customers?  Corporate customers are demanding near real time visibility on their corporate accounts Corporate customers can make better cash management decisions if they can analyse the impact. Can the Bank create opportunities to sell its products to the investment desks at corporate houses & manage their orders? How will the Bank bill the corporate customer for the value added services it provides. What does a SOA based Seamless STP solution bring to the table? Highlights of Oracle SOA based STP solution For the Corporate Customer: No Manual or Paper based banking transactions Secure Delivery of Payment data to the Bank from multiple ERPs without customization Single Portal for monitoring & administering payment transactions Rule based validation of payments Customer has data necessary for more effective handling of payment and cash management decisions  Business measurements track progress toward payment cost goals  For the Bank: Reduces time & complexity of transactions Simplifies the process of introducing new products to corporate customers Single Payment hub for all corporate ERP payments across multiple instruments New Revenue sources by delivering value added services to customers Leverages existing payment infrastructure Remove Inconsistent data formats and interchange between bank and corporate systems  Compliance and many other benefits

    Read the article

  • Unable to make properly work the Ralink rt3090 wifi card on my Lenovo B575 with Kubuntu 12.04 64bit

    - by Sebastien
    I look and tried many solution from many thread but I still unable to make this wifi card work properly (very slow, unable to connect to some wifi spot, etc.). I tried to compile the driver from the ralink website but it doesn't work. Tried to blacklist many mod, withou any result. So here are some command results, hope their help you help me: lspci sebastien@sebastien-portable:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) 00:15.2 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe lsmod sebastien@sebastien-portable:~$ lsmod Module Size Used by rt2800pci 18715 0 arc4 12529 2 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 55301 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci rt2860sta 864748 0 snd_hda_codec_conexant 62128 1 snd_hda_codec_hdmi 32474 1 uvcvideo 72627 0 rts5139 351143 0 snd_hda_intel 33773 4 videodev 98259 1 uvcvideo snd_hda_codec 127706 3 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec psmouse 87692 0 v4l2_compat_ioctl32 17128 1 videodev serio_raw 13211 0 k10temp 13166 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec sp5100_tco 13791 0 i2c_piix4 13301 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi ideapad_laptop 18234 0 sparse_keymap 13890 1 ideapad_laptop rfcomm 47604 0 joydev 17693 0 snd_seq_midi_event 14899 1 snd_seq_midi bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 18 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd mac_hid 13253 0 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 radeon 804372 4 video 19596 0 wmi 19256 0 ttm 76949 1 radeon drm_kms_helper 46978 1 radeon drm 242038 6 radeon,ttm,drm_kms_helper i2c_algo_bit 13423 1 radeon iwconfig sebastien@sebastien-portable:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"4CE6763F0E0A" Mode:Managed Frequency:2.452 GHz Access Point: 4C:E6:76:3F:0E:0A Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:100 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • Grid pathfinding with a lot of entities

    - by Vee
    I'd like to explain this problem with a screenshot from a released game, DROD: Gunthro's Epic Blunder, by Caravel Games. The game is turn-based and tile-based. I'm trying to create something very similar (a clone of the game), and I've got most of the fundamentals done, but I'm having trouble implementing pathfinding. Look at the screenshot. The guys in yellow are friendly, and want to kill the roaches. Every turn, every guy in yellow pathfinds to the closest roach, and every roach pathfinds to the closest guy in yellow. By closest I mean the target with the shortest path, not a simple distance calculation. All of this without any kind of slowdown when loading the level or when passing turns. And all of the entities change position every turn. Also (not shown in screenshot), there can be doors that open and close and change the level's layout. Impressive. I've tried implementing pathfinding in my clone. First attempt was making every roach find a path to a yellow guy every turn, using a breadth-first search algorithm. Obviously incredibly slow with more than a single roach, and would get exponentially slower with more than a single yellow guy. Second attempt was mas making every yellow guy generate a pathmap (still breadth-first search) every time he moved. Worked perfectly with multiple roaches and a single yellow guy, but adding more yellow guys made the game slow and unplayable. Last attempt was implementing JPS (jump point search). Every entity would individually calculate a path to its target. Fast, but with a limited number of entities. Having less than half the entities in the screenshot would make the game slow. And also, I had to get the "closest" enemy by calculating distance, not shortest path. I've asked on the DROD forums how they did it, and a user replied that it was breadth-first search. The game is open source, and I took a look at the source code, but it's C++ (I'm using C#) and I found it confusing. I don't know how to do it. Every approach I tried isn't good enough. And I believe that DROD generates global pathmaps, somehow, but I can't understand how every entity find the best individual path to other entities that move every turn. What's the trick? This is a reply I just got on the DROD forums: Without having looked at the code I'd wager it's two (or so) pathmaps for the whole room: One to the nearest enemy, and one to the nearest friendly for every tile. There's no need to make a separate pathmap for every entity when the overall goal is "move towards nearest enemy/friendly"... just mark every tile with the number of moves it takes to the nearest target and have the entity chose the move that takes it to the tile with the lowest number. To be honest, I don't understand it that well.

    Read the article

  • Oracle EMEA News Digest - May 2014

    - by Steve Walker
    Systems Oracle introduced a technology preview of an OpenStack® distribution that allows Oracle Linux and Oracle VM users to work with the open source cloud software. This provides customers with additional choices and interoperability while taking advantage of the efficiency, performance, scalability, and security of Oracle Linux and Oracle VM. The distribution is delivered as part of the Oracle Linux and Oracle VM Premier Support offerings, at no additional cost. Oracle plans to work further with the OpenStack community to develop and enhance its enterprise-class capabilities to meet customer demands. Also in the Open Source arena, Oracle announced the general availability of MySQL Fabric. MySQL Fabric provides an integrated system that makes it simpler to manage groups of MySQL databases. It delivers both high availability - via failure detection and failover - and scalability through automated data sharding. Oracle Database, Middleware and Technology The company made two announcements for Oracle Tuxedo, the #1 application server for C, C++, COBOL and Java deployments in private cloud or traditional data center environments. With enhanced management and monitoring features and tighter integration with Oracle technologies, the latest release of Oracle Tuxedo 12c enables organizations to dramatically increase application throughput, while reducing total cost of ownership and time to market for new application development and deployment. Oracle also introduced the latest release of its mainframe application rehosting platform, Oracle Tuxedo ART 12c, to help organizations speed up migration projects and accelerate the adoption of the new environment by current IT staff. It enables organizations to accelerate the rehosting of IBM mainframe applications and greatly enhance management and supportability of the rehosted applications while reducing costs and risk. Applications According to new Oracle studies, B2B and B2C commerce professionals find integrated, omni-channel customer experiences increasingly valuable to their organizations, and are continuing to invest in technologies and digital content strategies to facilitate them. The studies—one for B2B and one for B2C—surveyed e-commerce professionals in business and technology departments from around the world. Although the priorities, success metrics, and technology investments differed between the two groups, customer acquisition and retention emerged as common themes across B2B and B2C. Growing market share and enhancing customer experience are cited as top investment areas for all e-commerce professionals. In product news, Oracle announced the latest release of Oracle Business Intelligence (BI) Applications (version 11.1.1.8.1, in case anyone asks). It includes prebuilt connectors between Oracle Procurement and Spend Analytics and Oracle’s JD Edwards. Additionally, a new Oracle Human Resources Analytics module for developing and maintaining a skilled workforce has been introduced. In use at more than 4,000 companies worldwide, Oracle BI Applications support leading enterprise applications, including Oracle E-Business Suite, Oracle’s PeopleSoft, Oracle's Siebel CRM, Oracle’s JD Edwards EnterpriseOne offering high-performing analytics at a lower cost. Industries For the Communications Industry, Oracle has launched a new release of the Oracle Communications Core Session Manager. This gives CSPs a new way to design, deploy and manage complex networking services and embrace next-generation technology, It provides them with an immediate entry point for  network function virtualization (NFV) efforts, allowing them to realize immediate benefits associated with network virtualization – including increased service agility and improved network resource sharing. And for the Utilities Industry, Oracle is releasing solutions with new business features and enhanced technical architecture that help position utilities for success now and into the future. Oracle has provided new releases for its customer information system,  meter data management system, customer self-service solution and mobile workforce management solution.

    Read the article

  • SDL_image & OpenGL Problem

    - by Dylan
    i've been following tutorials online to load textures using SDL and display them on a opengl quad. but ive been getting weird results that no one else on the internet seems to be getting... so when i render the texture in opengl i get something like this. http://www.kiddiescissors.com/after.png when the original .bmp file is this: http://www.kiddiescissors.com/before.bmp ive tried other images too, so its not that this particular image is corrupt. it seems like my rgb channels are all jumbled or something. im pulling my hair out at this point. heres the relevant code from my init() function if ( SDL_Init(SDL_INIT_VIDEO) != 0 ) { return 1; } SDL_GL_SetAttribute(SDL_GL_DOUBLEBUFFER, 1); SDL_GL_SetAttribute( SDL_GL_RED_SIZE, 8 ); SDL_GL_SetAttribute( SDL_GL_GREEN_SIZE, 8 ); SDL_GL_SetAttribute( SDL_GL_BLUE_SIZE, 8 ); SDL_GL_SetAttribute( SDL_GL_ALPHA_SIZE, 8 ); SDL_GL_SetAttribute(SDL_GL_MULTISAMPLEBUFFERS, 1); SDL_GL_SetAttribute(SDL_GL_MULTISAMPLESAMPLES, 4); SDL_SetVideoMode(WINDOW_WIDTH, WINDOW_HEIGHT, 32, SDL_HWSURFACE | SDL_GL_DOUBLEBUFFER | SDL_OPENGL); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(50, (GLfloat)WINDOW_WIDTH/WINDOW_HEIGHT, 1, 50); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); glEnable(GL_DEPTH_TEST); glEnable(GL_MULTISAMPLE); glEnable(GL_TEXTURE_2D); glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_ONE, GL_ONE_MINUS_SRC_ALPHA); glEnable(GL_BLEND); heres the code that is called when my main player object (the one with which this sprite is associated) is initialized texture = 0; SDL_Surface* surface = IMG_Load("i.bmp"); glGenTextures(1, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, surface->w, surface->h, 0, GL_RGB, GL_UNSIGNED_BYTE, surface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); SDL_FreeSurface(surface); and then heres the relevant code from my display function glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); glColor4f(1, 1, 1, 1); glPushMatrix(); glBindTexture(GL_TEXTURE_2D, texture); glTranslatef(getCenter().x, getCenter().y, 0); glRotatef(getAngle()*(180/M_PI), 0, 0, 1); glTranslatef(-getCenter().x, -getCenter().y, 0); glBegin(GL_QUADS); glTexCoord2f(0, 0); glVertex3f(getTopLeft().x, getTopLeft().y, 0); glTexCoord2f(0, 1); glVertex3f(getTopLeft().x, getTopLeft().y + size.y, 0); glTexCoord2f(1, 1); glVertex3f(getTopLeft().x + size.x, getTopLeft().y + size.y, 0); glTexCoord2f(1, 0); glVertex3f(getTopLeft().x + size.x, getTopLeft().y, 0); glEnd(); glPopMatrix(); let me know if i left out anything important... or if you need more info from me. thanks a ton, -Dylan

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Converting a PV vm back into an HVM vm

    - by wim.coekaerts
    I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

    Read the article

  • Desktop Applications Versus Web Applications

    Up until the advent of the internet programmers really only developed one type of application used by end-users.  This type of application was called a desktop application. As the name implies, these applications ran strictly from a desktop computer, and were limited by the resources available to the computer. Initially, this type of applications did not need resources outside of the scope of the computer in which they installed. The problem with this type of application is that if multiple end-users need to access the same desktop application, then the application must be installed on the end-user’s computer. In this age of software development security was not as big of a concern as it is today with other types of applications. This is primarily due to the fact that an end-user must have access to the computer where the software is installed in order for them to access the application. In addition, developers could also password protect the application just in case an authorized end-user was able to gain access to the computer. With the birth of the internet a second form of application emerged because developers were trying to solve inherent issues with the preexisting desktop application. One of the solutions to overcome some of the short comings of desktop applications is the web application. Web applications are hosted on a centralized server and clients only need to have network access and a web browser in order to access the application. Because a web application can be installed on a remote server it removes the need for individual installations of the same application on each end-user’s computer.  The main benefits to an application being hosted on a server is increased accessibility to the application due to the fact that nothing has to be installed on a desktop computer for an end-user to be able to access the application. In addition, web applications are much easier to maintain because any change to the application is applied on the server and is inherently applied to any end-user trying to use the application. This removes the time needed to install and maintain individual installations of a desktop application. However with the increased accessibility there are additional costs that are incurred compared to a desktop application because of the additional cost and maintenance of a server hosting the application. Typically, after a desktop application is purchased there are no additional reoccurring fees associated with the application.  When developing a web based application there are additional considerations that must be addressed compared to a desktop application. The added benefit of increased accessibility also now adds a new failure point when trying to gain access to an application. An end-user now must have network connectivity in order to access the application. This issue is not a concern for desktop applications because there resources are typically bound to the computer in which they run. Since the availability of an application is increased with the use of the client-server model in a web based application, additional security concerns now come in to play. As stated before a, desktop application is bound to the accessibility of the end-user to the computer that the application is installed. This is not the case with web based applications because they potentially could have access from anywhere with the proper internet/network connection. Additional security steps are required to insure the integrity of the application and its data. Examples of these steps include and are not limited to the following: Restricted/Password Areas This form of security is used when specific information can only be accessed by end-users based on a set of accessibility rules. IP Restrictions This form of security is used when only specific locations need to access an application. This form of security is applied from within the web server or a firewall. Network Restrictions (Firewalls) This form of security is used to contain access to an application within a specific sub set of a network. Data Encryption This form of security is used transform personally identifiable information in to something unreadable so that it can be stored for future use. Encrypted Protocols (HTTPS) This form of security is used to prevent others from reading messages being sent between applications over a network.

    Read the article

  • Is It Worth It To Learn Experimental Languages

    - by Xander Lamkins
    I'm a young programmer who desires to work in the field someday as a programmer. I know Java, VB.NET and C#. I want to learn a new language (as I programmer, I know that it is valuable to extend what I know - to learn languages that make you think differently). I took a look online to see what languages were common. Everybody knows C and C++ (even those muggles who know so little about computers in general), so I thought, maybe I should push for C. C and C++ are nice but they are old. Things like Haskell and Forth (etc. etc. etc.) are old and have lost their popularity. I'm scared of learning C (or even C++) for this same reason. Java is pretty old as well and is slow because it's run by the JVM and not compiled to native code. I've been a Windows developer for quite a while. I recently started using Java - but only because it was more versatile and spreadable to other places. The problem is that it doesn't look like a very usable language for these reasons: It's most used purpose is for web application and cellphone apps (specifically Android) As far as actual products made with it, the only things that come to mind are Netbeans, Eclipse (hurrah for making and IDE with the language the IDE is for - it's like making a webpage for writing HTML/CSS/Javascript), and Minecraft which happens to be fun but laggy and bipolar as far as computer spec. support. Other than that it's used for servers but heck - I don't only want to make/configure servers. The .NET languages are nice, however: People laugh if I even mention VB.NET or C# in a serious conversation. It isn't cross-platform unless you use MONO (which is still in development and has some improvements to be made). Lacks low level stuff because, like Java with the JVM, it is run/managed by the CLR. My first thought was learning something like C and then using it to springboard into C++ (just to make sure I would have a strong understanding/base), but like I said earlier, it's getting older and older by the minute. What I've Looked Into Fantom looks nice. It's like a nice middleman between my two favorite languages and even lets me publish between the two interchangeably, but, unlike what I want, it compiles to the CLR or JVM (depending on what you publish it to) instead of it being a complete compile. D also looks nice. It seems like a very usable language and from multiple sources it appears to actually be better than C/C++. I would jump right with it, but I'm still unsure of its success because it obviously isn't very mainstream at this point. There are a couple others that looked pretty nice that focused on other things such as Opa with web development and Go by GOOGLE. My Question Is it worth learning these "experimental" languages? I've read other questions that say that if you aren't constantly learning languages and open to all languages that you aren't in the right mindset for programming. I understand this and I still might not quite be getting it, but in truth, if a language isn't going to become mainstream, should I spend my time learning something else? I don't want to learn old (or any going to soon be old) programming languages. I know that many people see this as something important, *but would any of you ever actually consider (assuming you didn't already know) FORTRAN? My goal is to stay current to make sure I'm successful in the future. Disclaimer Yes, I am a young programmer, so I probably made a lot of naive statements in my question. Feel free to correct me on ANYTHING! I have to start learning somewhere so I'm sure a lot of my knowledge is sketchy enough to have caused to incorrect statements or flaws in my thinking. Please leave any feelings you have in the comments.

    Read the article

  • How would I handle input with a Game Component?

    - by Aufziehvogel
    I am currently having problems from finding my way into the component-oriented XNA design. I read an overview over the general design pattern and googled a lot of XNA examples. However, they seem to be right on the opposite site. In the general design pattern, an object (my current player) is passed to InputComponent::update(Player). This means the class will know what to do and how this will affect the game (e.g. move person vs. scroll text in a menu). Yet, in XNA GameComponent::update(GameTime) is called automatically without a reference to the current player. The only XNA examples I found built some sort of higher-level Keyboard engine into the game component like this: class InputComponent: GameComponent { public void keyReleased(Keys); public void keyPressed(Keys); public bool keyDown(Keys); public void override update(GameTime gameTime) { // compare previous state with current state and // determine if released, pressed, down or nothing } } Some others went a bit further making it possible to use a Service Locator by a design like this: interface IInputComponent { public void downwardsMovement(Keys); public void upwardsMovement(Keys); public bool pausedGame(Keys); // determine which keys pressed and what that means // can be done for different inputs in different implementations public void override update(GameTime); } Yet, then I am wondering if it is possible to design an input class to resolve all possible situations. Like in a menu a mouse click can mean "click that button", but in game play it can mean "shoot that weapon". So if I am using such a modular design with game components for input, how much logic is to be put into the InputComponent / KeyboardComponent / GamepadComponent and where is the rest handled? What I had in mind, when I heard about Game Components and Service Locator in XNA was something like this: use Game Components to run the InputHandler automatically in the loop use Service Locator to be able to switch input at runtime (i.e. let player choose if he wants to use a gamepad or a keyboard; or which shall be player 1 and which player 2). However, now I cannot see how this can be done. First code example does not seem flexible enough, as on a game pad you could require some combination of buttons for something that is possible on keyboard with only one button or with the mouse) The second code example seems really hard to implement, because the InputComponent has to know in which context we are currently. Moreover, you could imagine your application to be multi-layered and let the key-stroke go through all layers to the bottom-layer which requires a different behaviour than the InputComponent would have guessed from the top-layer. The general design pattern with passing the Player to update() does not have a representation in XNA and I also cannot see how and where to decide which class should be passed to update(). At most time of course the player, but sometimes there could be menu items you have to or can click I see that the question in general is already dealt with here, but probably from a more elobate point-of-view. At least, I am not smart enough in game development to understand it. I am searching for a rather code-based example directly for XNA. And the answer there leaves (a noob like) me still alone in how the object that should receive the detected event is chosen. Like if I have a key-up event, should it go to the text box or to the player?

    Read the article

  • VirtualBox 3.2 is released! A Red Letter Day?

    - by Fat Bloke
    Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

    Read the article

  • Orchestrating the Virtual Enterprise, Part I

    - by Kathryn Perry
    A guest post by Jon Chorley, Oracle's Chief Sustainability Officer & Vice President, SCM Product Strategy During the American Industrial Revolution, the Ford Motor Company did it all. It turned raw materials into a showroom full of Model Ts. It owned a steel mill, a glass factory, and an automobile assembly line. The company was both self-sufficient and innovative and went on to become one of the largest and most profitable companies in the world. Nowadays, it's unusual for any business to follow this vertical integration model because its much harder to be best in class across such a wide a range of capabilities and services. Instead, businesses focus on their core competencies and outsource other business functions to specialized suppliers. They exchange vertical integration for collaboration. When done well, all parties benefit from this arrangement and the collaboration leads to the creation of an agile, lean and successful "virtual enterprise." Case in point: For Sun hardware, Oracle outsources most of its manufacturing and all of its logistics to third parties. These are vital activities, but ones where Oracle doesn't have a core competency, so we shift them to business partners who do. Within our enterprise, we always retain the core functions of product development, support, and most of the sales function, because that's what constitutes our core value to our customers. This is a perfect example of a virtual enterprise.  What are the implications of this? It means that we must exchange direct internal control for indirect external collaboration. This fundamentally changes the relative importance of different business processes, the boundaries of security and information sharing, and the relationship of the supply chain systems to the ERP. The challenge is that the systems required to support this virtual paradigm are still mired in "island enterprise" thinking. But help is at hand. Developments such as the Web, social networks, collaboration, and rules-based orchestration offer great potential to fundamentally re-architect supply chain systems to better support the virtual enterprise.  Supply Chain Management Systems in a Virtual Enterprise Historically enterprise software was constructed to automate the ERP - and then the supply chain systems extended the ERP. They were joined at the hip. In virtual enterprises, the supply chain system needs to be ERP agnostic, sitting above each of the ERPs that are distributed across the virtual enterprise - most of which are operating in other businesses. This is vital so that the supply chain system can manage the flow of material and the related information through the multiple enterprises. It has to have strong collaboration tools. It needs to be highly flexible. Users need to be able to see information that's coming from multiple sources and be able to react and respond to events across those sources.  Oracle Fusion Distributed Order Orchestration (DOO) is a perfect example of a supply chain system designed to operate in this virtual way. DOO embraces the idea that a company's fulfillment challenge is a distributed, multi-enterprise problem. It enables users to manage the process and the trading partners in a uniform way and deliver a consistent user experience while operating over a heterogeneous, virtual enterprise. This is a fundamental shift at the core of managing supply chains. It forces virtual enterprises to think architecturally about how best to construct their supply chain systems. In my next post, I will share examples of companies that have made that shift and talk more about the distributed orchestration process.

    Read the article

  • Using rel=next and rel=prev with multiple sets of paginated content on the same page

    - by jakejgordon
    We are running into issues with trying to figure out how to implement rel="next" and rel="prev" -- coupled with rel="canonical" -- with multiple sets of paginated content on the same page, with pages in multiple cultures. In other words, how do we implement these when we have a pager for both Product Reviews and Questions and Answers (aka "Q&A") on the same page, with duplicate content across culture-specific URLs (e.g. /us/en/my-product vs. /ca/en/my-product)? Our current implementation will actually do a full postback when you click Page 2, and will add something to the query string (e.g. website.com/ca/en/my-product?previewpage=2 or website.com/ca/en/my-product?questionpage=2). If we only had one set of paginated content then the implementation would certainly be more straightforward. Adding a second set of paginated content (i.e. Q&A) complicates things. Let's assume that we want the United States English page to be the canonical target (i.e. /us/en/my-product) based on culture. If you go to the /ca/en/my-product page you'll have a rel="canonical" href="/us/en/my-product". So far so good. Let's also assume that we are not implementing a page that lists ALL Product Reviews and Q&A. This would likely solve a number of our problems by using rel="canonical" to this page, but is not an option for reasons that are out of scope for this discussion. Now if you click on page 2 of Product Reviews, it will reload the page with /ca/en/my-product?reviewpage=2 as the URL. Given this scenario, here are my questions: On page 2 of the my-product page on the Canadian site, should there be a rel="canonical" to /us/en/my-product?reviewpage=2 (assuming the content is identical in the United States and Canada)? Should the rel="prev" go to /ca/en/my-product?reviewpage=1 or should it go to /ca/en/my-product ? The query-string version would really only be accessible if using the pager and shows the exact same content as the base page. The following two questions are closely related to this one. Should the /ca/en/my-product?reviewpage=1 have a rel canonical directly to /us/en/my-product (United States page with nothing in query string) since the content is identical)? Given that Q&A content is also paginated, should there be a rel="next" on the base page without query string? In other words, should the /ca/en/my-product page have a rel="next" to /ca/en/my-product?reviewpage=2 AND rel="next" to /ca/en/my-product?questionpage=2 . So far as I can tell it doesn't make sense to have multiple rel="next" implementations on the same page. I suspect that the pages with query string values should have rel="next" and rel="prev" that only point to other pages with query strings and not to the base page. The ?reviewpage=1 and ?questionpage=1 pages would then just have a rel="canonical" to /us/en/my-product . Thoughts? I know this is a tough one -- that's why I brought it to this community. Thanks so much for your help in advance!

    Read the article

  • Running a WebLogic Portal (WLP) 10.3.4 Domain as a Windows Service

    - by user647124
    To start a WLP server as a Windows service it is simplest to make your own script based on the provided standard script located at WL_HOME\server\bin\installSvc.cmd. The standard script works fine for a plain WLS domain, but lacks some classpath and options necessary for WLP.Start by making a copy of the installSvc.cmd script and naming it something specific to your domain.Next, just under SETLOCAL you will find where WL_HOME is defined. Here you will add the definitions you would normally add in a script that later calls installSvc.cmd (as per the standard documentation). set DOMAIN_NAME=gnma_test_domainset USERDOMAIN_HOME=D:\my_test_domainset SERVER_NAME=AdminServerset WLS_USER=weblogicset WLS_PW=gnmaAdmin01set PRODUCTION_MODE=trueset MEM_ARGS=-Xms512m –Xmx512mset MW_HOME=C:\Oracle\Middleware Note: I had heard of people using this approach who had issues with the length of the command line. This may be due to their use of the default domain path. In the example above, I use a shorter path.At this point, edit the DOMAIN_HOME\bin\startWebLogic.cmd and set it to echo both the classpath and the options. Then start the domain and capture the output of those echoes, then shut the domain back down. Now REM out the existing CLASSPATH definition, then use the outputs you captured earlier to set the CLASSPATH and JAVA_OPTIONS like this: REM set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%; C:\Oracle\Middleware\wlportal_10.3\portal\lib\security\wsrp-security-providers.jarset CLASSPATH=%MW_HOME%\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_wlp1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_oepe1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_ocm1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\JROCKI~1.1-3\lib\tools.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%MW_HOME%\modules\features\weblogic.server.modules_10.3.4.0.jar;%WL_HOME%\server\lib\webservices.jar;%MW_HOME%\modules\ORGAPA~1.1/lib/ant-all.jar;%MW_HOME%\modules\NETSFA~1.0_1/lib/ant-contrib.jar;%WL_HOME%\common\derby\lib\derbyclient.jar;%WL_HOME%\server\lib\xqrl.jar;%WL_HOME%\server\lib\xquery.jar;%WL_HOME%\server\lib\binxml.jarset JAVA_OPTIONS= -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=%WL_HOME% -Dwls.home=%WL_HOME%\server -Dweblogic.home=%WL_HOME%\server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=%MW_HOME%\patch_wls1034\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_wlp1034\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_oepe1111\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_ocm1033\profiles\default\sysext_manifest_classpath;%MW_HOME%\wlportal_10.3\p13n\lib\system;%MW_HOME%\wlportal_10.3\light-portal\lib\system;%MW_HOME%\wlportal_10.3\portal\lib\system;%MW_HOME%\wlportal_10.3\info-mgmt\lib\system;%MW_HOME%\wlportal_10.3\analytics\lib\system;%MW_HOME%\wlportal_10.3\apps\lib\system;%MW_HOME%\wlportal_10.3\info-mgmt\deprecated\lib\system;%MW_HOME%\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=%MW_HOME%\wlportal_10.3\portal\lib\securityAnd that's it. Looks really simple, but it took me quite some time to gather all the necessary pieces in order to make it work. Hopefully you find this before you went through half as much research.The example here uses a domain with only the Admin server and no managed servers. For a variety of reasons I only want the Admin server to be run as a service. The standard documentation along with the example above should allow you to expand this to include managed servers should you feel the need.

    Read the article

  • Algorithm for tracking progress of controller method running in background

    - by SilentAssassin
    I am using Codeigniter framework for PHP on Windows platform. My problem is I am trying to track progress of a controller method running in background. The controller extracts data from the database(MySQL) then does some processing and then stores the results again in the database. The complete aforesaid process can be considered as a single task. A new task can be assigned while another task is running. The newly assigned task will be added in a queue. So if I can track progress of the controller, I can show status for each of these tasks. Like I can show "Pending" status for tasks in the queue, "In Progress" for tasks running and "Done" for tasks that are completed. Main Issue: Now first thing I need to find is an algorithm to track the progress of how much amount of execution the controller method has completed and that means tracking how much amount of method has completed execution. For instance, this PHP script tracks progress of array being counted. Here the current state and state after total execution are known so it is possible to track its progress. But I am not able to devise anything analogous to it in my case. Maybe what I am trying to achieve is programmtically not possible. If its not possible then suggest me a workaround or a completely new approach. If some details are pending you can mention them. Sorry for my ignorance this is my first post here. I welcome you to point out my mistakes. EDIT: Database outline: The URL(s) and keyword(s) are first entered by user which are stored in a database table called link_master and keyword_master respectively. Then keywords are extracted from all the links present in this table and compared with keywords entered by user and their frequency is calculated which is the final result. And the results are stored in another table called link_result. Now sub-links are extracted from the domain links and stored in a table called sub_link_master. Now again the keywords are extracted from these sub-links and the corresponding results are stored in a table called sub_link_result. The number of records cannot be defined beforehand as the number of links on any web page can be different. Only the cardinality of *link_result* table can be known which will be equal to multiplication of number of keyword(s) and URL(s) . I insert multiple records at a time using this resource. Controller outline: The controller extracts keywords from a web page and also extracts keywords from all the links present on that page. There is a method called crawlLink. I used Rolling Curl to extract keywords and web page content. It has callback function which I used for extracting keywords alongwith generating results and extracting valid sub-links. There is a insertResult method which stores results for links and sub-links in the respective tables. Yes, the processing depends on the number of records. The more the number of records, the more time it takes to execute: Consider this scenario: Number of Domain Links = 1 Number of Keywords = 3 Number of Domain Links Result generated = 3 (3 x 1 as described in the question) Number of Sub Links generated = 41 Number of Sub Links Result = 117 (41 x 3 = 123 but some links are not valid or searchable) Approximate time taken for above process to complete = 55 seconds. The above result is for a single link. I want to track the progress of the above results getting stored in database. When all results are stored, the task is complete. If results are getting stored, the task is In Progress. I am not clear how can I track this progress.

    Read the article

  • Is This Your Idea of Disaster Recovery?

    - by rickramsey
    Don't just make do with less. Protect what you've got. By, for instance, deploying Oracle Solaris 10 inside a zone cluster. "Wait," you say, "what is a zone cluster?" It is a zone deployed across different physical servers. "Who would do that!" you ask in a mild panic. Why, an upstanding sysadmin citizen interested in protecting his or her employer's investment with appropriate high availability and disaster recovery. If one server gets wiped out by Hurricane Sandy along with pretty much the entire East Coast of the USA, your zone continues to run on the other server(s). Provided you set them up in Edinburgh. This white paper (pdf) explains what a zone cluster is and how to use it. If a white paper reminds you of having to read War and Peace in school, just use this Oracle RAC and Solaris Cluster Cheat Sheet, instead. "But wait!" you exclaim. "I didn't realize Solaris 10 offered zone clusters!" I didn't, either! And in an earlier version of this blog post I said that zone clusters were only available with Oracle Solaris 11. But Karoly Vegh pointed me to the documentation for Oracle Solaris Cluster 3.3, which explains how to manage zone clusters in Oracle Solaris 10. Bite my fist! So, the point I was trying to make is not just that you can run Oracle Solaris 10 zone clusters, but that you can run them in an Oracle Solaris 11 environment. Now let's return to our conversation and pick up where we left off ... "Oh no! Whatever shall I do?" Fear not. Remember how Oracle Solaris 11 lets you create a Solaris 10 branded zone inside a system running Oracle Solaris 11? Well, the Solaris Cluster engineers thought that was a bang-up idea, and decided to extend Oracle Solaris Cluster so that you could run your Solaris 10 applications inside the protective cocoon of an Oracle Solaris 11 zone cluster. Take advantage of the installation improvements and network virtualization capabilities of Oracle Solaris 11 while still running your application on Oracle Solaris 10. You Luddite, you. That capability is in the latest release of Oracle Solaris Cluster, version 4.1, which became available last Friday. "Last Friday! Is it too late to get a copy?" You can still get a free copy from our download center (see below). And, if you'd like to know what other goodies the 4.1 release of Oracle Solaris Cluster provides, see: What's New In Oracle Solaris Cluster 4.1 (pdf) Free download Oracle Solaris Cluster 4.1 (SPARC or x86) Tech Article: How to Upgrade to Oracle Solaris Cluster 4.0, by Tim Read. As always, you can get the latest information about Oracle Solaris Cluster, plus technical how-to articles, documentation, and more from Oracle Solaris Cluster Resource Page for Sysadmins and Developers. And don't forget about the online launch of Oracle Solaris 11.1 and Oracle Solaris Cluster 4.1, scheduled for Nov 7. "I feel so much better, now!" Think nothing of it. That's what we're here for. - Rick Website Newsletter Facebook Twitter

    Read the article

  • Best Practices - Core allocation

    - by jsavit
    This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (also called Logical Domains) Introduction SPARC T-series servers currently have up to 4 CPU sockets, each of which has up to 8 or (on SPARC T3) 16 CPU cores, while each CPU core has 8 threads, for a maximum of 512 dispatchable CPUs. The defining feature of Oracle VM Server for SPARC is that each domain is assigned CPU threads or cores for its exclusive use. This avoids the overhead of software-based time-slicing and emulation (or binary rewriting) of system state-changing privileged instructions used in traditional hypervisors. To create a domain, administrators specify either the number of CPU threads or cores that the domain will own, as well as its memory and I/O resources. When CPU resources are assigned at the individual thread level, the logical domains constraint manager attempts to assign threads from the same cores to a domain, and avoid "split core" situations where the same CPU core is used by multiple domains. Sometimes this is unavoidable, especially when domains are allocated and deallocated CPUs in small increments. Why split cores can matter Split core allocations can silenty reduce performance because multiple domains with different address spaces and memory contents are sharing the core's Level 1 cache (L1$). This is called false cache sharing since even identical memory addresses from different domains must point to different locations in RAM. The effect of this is increased contention for the cache, and higher memory latency for each domain using that core. The degree of performance impact can be widely variable. For applications with very small memory working sets, and with I/O bound or low-CPU utilization workloads, it may not matter at all: all machines wait for work at the same speed. If the domains have substantial workloads, or are critical to performance then this can have an important impact: This blog entry was inspired by a customer issue in which one CPU core was split among 3 domains, one of which was the control and service domain. The reported problem was increased I/O latency in guest domains, but the root cause might be higher latency servicing the I/O requests due to the control domain being slowed down. What to do about it Split core situations are easily avoided. In most cases the logical domain constraint manager will avoid it without any administrative action, but it can be entirely prevented by doing one of the several actions: Assign virtual CPUs in multiples of 8 - the number of threads per core. For example: ldm set-vcpu 8 mydomain or ldm add-vcpu 24 mydomain. Each domain will then be allocated on a core boundary. Use the whole core constraint when assigning CPU resources. This allocates CPUs in increments of entire cores instead of virtual CPU threads. The equivalent of the above commands would be ldm set-core 1 mydomain or ldm add-core 3 mydomain. Older syntax does the same thing by adding the -c flag to the add-vcpu, rm-vcpu and set-vcpu commands, but the new syntax is recommended. When whole core allocation is used an attempt to add cores to a domain fails if there aren't enough completely empty cores to satisfy the request. See https://blogs.oracle.com/sharakan/entry/oracle_vm_server_for_sparc4 for an excellent article on this topic by Eric Sharakan. Don't obsess: - if the workloads have minimal CPU requirements and don't need anywhere near a full CPU core, then don't worry about it. If you have low utilization workloads being consolidated from older machines onto a current T-series, then there's no need to worry about this or to assign an entire core to domains that will never use that much capacity. In any case, make sure the most important domains have their own CPU cores, in particular the control domain and any I/O or service domain, and of course any important guests. Summary Split core CPU allocation to domains can potentially have an impact on performance, but the logical domains manager tends to prevent this situation, and it can be completely and simply avoided by allocating virtual CPUs on core boundaries.

    Read the article

  • Help needed throwing a ball in AS3

    - by Opoe
    I'm working on a flash game, coding on the time line. What I'm trying to accomplish is the following: With the mouse you swing and throw/release a ball which bounces against the walls and eventualy comes to point where it lays still (like a real ball). I allmost had it working, but now the ball sticks to the mouse, in stead of being released, my question to you is: Can you help me make this work and explain to me what I did wrong? You can simply preview my code by making a movieclip named 'circle' on a 550x400 stage. stage.addEventListener(Event.ENTER_FRAME, circle_update); var previousPostionX:Number; var previousPostionY:Number; var throwSpeedX:Number; var throwSpeedY:Number; var isItDown:Boolean; var xSpeed:Number = 0; var ySpeed:Number = 0; var friction:Number = 0.96; var offsetX:Number = 0; var offsetY:Number = 0; var newY:Number = 0; var oldY:Number = 0; var newX:Number = 0; var oldX:Number = 0; var dragging:Boolean; circle.buttonMode = true; circle.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler); circle.addEventListener(Event.ENTER_FRAME, throwcircle); circle.addEventListener(MouseEvent.MOUSE_DOWN, clicked); circle.addEventListener(MouseEvent.MOUSE_UP, released); function mouseDownHandler(e:MouseEvent):void { dragging = true; stage.addEventListener(MouseEvent.MOUSE_UP, mouseUpHandler); offsetX = mouseX - circle.x; offsetY = mouseY - circle.y; } function mouseUpHandler(e:MouseEvent):void { dragging = false; } function throwcircle(e:Event) { circle.x += xSpeed; circle.y += ySpeed; xSpeed *= friction; ySpeed *= friction; } function changeFriction(e:Event):void { friction = e.target.value; trace(e.target.value); } function circle_update(e:Event){ if ( dragging == true ) { circle.x = mouseX - offsetX; circle.y = mouseY - offsetY; } if(circle.x + (circle.width * 0.50) >= 550){ circle.x = 550 - circle.width * 0.50; } if(circle.x - (circle.width * 0.50) <= 0){ circle.x = circle.width * 0.50; } if(circle.y + (circle.width * 0.50) >= 400){ circle.y = 400 - circle.height * 0.50; } if(circle.y - (circle.width * 0.50) <= 0){ circle.y = circle.height * 0.50; } } function clicked(theEvent:Event) { isItDown =true; addEventListener(Event.ENTER_FRAME, updateView); } function released(theEvent:Event) { isItDown =false; } function updateView(theEvent:Event) { if (isItDown==true){ throwSpeedX = mouseX - previousPostionX; throwSpeedY = mouseY - previousPostionY; circle.x = mouseX; circle.y = mouseY; } else{ circle.x += throwSpeedX; circle.y += throwSpeedY; throwSpeedX *=0.9; throwSpeedY *=0.9; } previousPostionX= circle.x; previousPostionY= circle.y; }

    Read the article

  • SQL Server Date Comparison Functions

    - by HighAltitudeCoder
    A few months ago, I found myself working with a repetitive cursor that looped until the data had been manipulated enough times that it was finally correct.  The cursor was heavily dependent upon dates, every time requiring the earlier of two (or several) dates in one stored procedure, while requiring the later of two dates in another stored procedure. In short what I needed was a function that would allow me to perform the following evaluation: WHERE MAX(Date1, Date2) < @SomeDate The problem is, the MAX() function in SQL Server does not perform this functionality.  So, I set out to put these functions together.  They are titled: EarlierOf() and LaterOf(). /**********************************************************                               EarlierOf.sql   **********************************************************/ /**********************************************************   Return the later of two DATETIME variables.   Parameter 1: DATETIME1 Parameter 2: DATETIME2   Works for a variety of DATETIME or NULL values. Even though comparisons with NULL are actually indeterminate, we know conceptually that NULL is not earlier or later than any other date provided.   SYNTAX: SELECT dbo.EarlierOf('1/1/2000','12/1/2009') SELECT dbo.EarlierOf('2009-12-01 00:00:00.000','2009-12-01 00:00:00.521') SELECT dbo.EarlierOf('11/15/2000',NULL) SELECT dbo.EarlierOf(NULL,'1/15/2004') SELECT dbo.EarlierOf(NULL,NULL)   **********************************************************/ USE AdventureWorks GO   IF EXISTS       (SELECT *       FROM sysobjects       WHERE name = 'EarlierOf'       AND xtype = 'FN'       ) BEGIN             DROP FUNCTION EarlierOf END GO   CREATE FUNCTION EarlierOf (       @Date1                              DATETIME,       @Date2                              DATETIME )   RETURNS DATETIME   AS BEGIN       DECLARE @ReturnDate     DATETIME         IF (@Date1 IS NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = NULL             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NULL AND @Date2 IS NOT NULL)       BEGIN             SET @ReturnDate = @Date2             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NOT NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = @Date1             GOTO EndOfFunction       END         ELSE       BEGIN             SET @ReturnDate = @Date1             IF @Date2 < @Date1                   SET @ReturnDate = @Date2             GOTO EndOfFunction       END         EndOfFunction:       RETURN @ReturnDate   END -- End Function GO   ---- Set Permissions --GRANT SELECT ON EarlierOf TO UserRole1 --GRANT SELECT ON EarlierOf TO UserRole2 --GO                                                                                             The inverse of this function is only slightly different. /**********************************************************                               LaterOf.sql   **********************************************************/ /**********************************************************   Return the later of two DATETIME variables.   Parameter 1: DATETIME1 Parameter 2: DATETIME2   Works for a variety of DATETIME or NULL values. Even though comparisons with NULL are actually indeterminate, we know conceptually that NULL is not earlier or later than any other date provided.   SYNTAX: SELECT dbo.LaterOf('1/1/2000','12/1/2009') SELECT dbo.LaterOf('2009-12-01 00:00:00.000','2009-12-01 00:00:00.521') SELECT dbo.LaterOf('11/15/2000',NULL) SELECT dbo.LaterOf(NULL,'1/15/2004') SELECT dbo.LaterOf(NULL,NULL)   **********************************************************/ USE AdventureWorks GO   IF EXISTS       (SELECT *       FROM sysobjects       WHERE name = 'LaterOf'       AND xtype = 'FN'       ) BEGIN             DROP FUNCTION LaterOf END GO   CREATE FUNCTION LaterOf (       @Date1                              DATETIME,       @Date2                              DATETIME )   RETURNS DATETIME   AS BEGIN       DECLARE @ReturnDate     DATETIME         IF (@Date1 IS NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = NULL             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NULL AND @Date2 IS NOT NULL)       BEGIN             SET @ReturnDate = @Date2             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NOT NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = @Date1             GOTO EndOfFunction       END         ELSE       BEGIN             SET @ReturnDate = @Date1             IF @Date2 > @Date1                   SET @ReturnDate = @Date2             GOTO EndOfFunction       END         EndOfFunction:       RETURN @ReturnDate   END -- End Function GO   ---- Set Permissions --GRANT SELECT ON LaterOf TO UserRole1 --GRANT SELECT ON LaterOf TO UserRole2 --GO                                                                                             The interesting thing about this function is its simplicity and the built-in NULL handling functionality.  Its interesting, because it seems like something should already exist in SQL Server that does this.  From a different vantage point, if you create this functionality and it is easy to use (ideally, intuitively self-explanatory), you have made a successful contribution. Interesting is good.  Self-explanatory, or intuitive is FAR better.  Happy coding! Graeme

    Read the article

  • Why is there no service-oriented language?

    - by Wolfgang
    Edit: To avoid further confusion: I am not talking about web services and such. I am talking about structuring applications internally, it's not about how computers communicate. It's about programming languages, compilers and how the imperative programming paradigm is extended. Original: In the imperative programming field, we saw two paradigms in the past 20 years (or more): object-oriented (OO), and service-oriented (SO) aka. component-based (CB). Both paradigms extend the imperative programming paradigm by introducing their own notion of modules. OO calls them objects (and classes) and lets them encapsulates both data (fields) and procedures (methods) together. SO, in contrast, separates data (records, beans, ...) from code (components, services). However, only OO has programming languages which natively support its paradigm: Smalltalk, C++, Java and all other JVM-compatibles, C# and all other .NET-compatibles, Python etc. SO has no such native language. It only comes into existence on top of procedural languages or OO languages: COM/DCOM (binary, C, C++), CORBA, EJB, Spring, Guice (all Java), ... These SO frameworks clearly suffer from the missing native language support of their concepts. They start using OO classes to represent services and records. This leads to designs where there is a clear distinction between classes that have methods only (services) and those that have fields only (records). Inheritance between services or records is then simulated by inheritance of classes. Technically, its not kept so strictly but in general programmers are adviced to make classes to play only one of the two roles. They use additional, external languages to represent the missing parts: IDL's, XML configurations, Annotations in Java code, or even embedded DSL like in Guice. This is especially needed, but not limited to, since the composition of services is not part of the service code itself. In OO, objects create other objects so there is no need for such facilities but for SO there is because services don't instantiate or configure other services. They establish an inner-platform effect on top of OO (early EJB, CORBA) where the programmer has to write all the code that is needed to "drive" SO. Classes represent only a part of the nature of a service and lots of classes have to be written to form a service together. All that boiler plate is necessary because there is no SO compiler which would do it for the programmer. This is just like some people did it in C for OO when there was no C++. You just pass the record which holds the data of the object as a first parameter to the procedure which is the method. In a OO language this parameter is implicit and the compiler produces all the code that we need for virtual functions etc. For SO, this is clearly missing. Especially the newer frameworks extensively use AOP or introspection to add the missing parts to a OO language. This doesn't bring the necessary language expressiveness but avoids the boiler platform code described in the previous point. Some frameworks use code generation to produce the boiler plate code. Configuration files in XML or annotations in OO code is the source of information for this. Not all of the phenomena that I mentioned above can be attributed to SO but I hope it clearly shows that there is a need for a SO language. Since this paradigm is so popular: why isn't there one? Or maybe there are some academic ones but at least the industry doesn't use one.

    Read the article

  • Logging errors caused by exceptions deep in the application

    - by Kaleb Pederson
    What are best-practices for logging deep within an application's source? Is it bad practice to have multiple event log entries for a single error? For example, let's say that I have an ETL system whose transform step involves: a transformer, pipeline, processing algorithm, and processing engine. In brief, the transformer takes in an input file, parses out records, and sends the records through the pipeline. The pipeline aggregates the results of the processing algorithm (which could do serial or parallel processing). The processing algorithm sends each record through one or more processing engines. So, I have at least four levels: Transformer - Pipeline - Algorithm - Engine. My code might then look something like the following: class Transformer { void Process(InputSource input) { try { var inRecords = _parser.Parse(input.Stream); var outRecords = _pipeline.Transform(inRecords); } catch (Exception ex) { var inner = new ProcessException(input, ex); _logger.Error("Unable to parse source " + input.Name, inner); throw inner; } } } class Pipeline { IEnumerable<Result> Transform(IEnumerable<Record> records) { // NOTE: no try/catch as I have no useful information to provide // at this point in the process var results = _algorithm.Process(records); // examine and do useful things with results return results; } } class Algorithm { IEnumerable<Result> Process(IEnumerable<Record> records) { var results = new List<Result>(); foreach (var engine in Engines) { foreach (var record in records) { try { engine.Process(record); } catch (Exception ex) { var inner = new EngineProcessingException(engine, record, ex); _logger.Error("Engine {0} unable to parse record {1}", engine, record); throw inner; } } } } } class Engine { Result Process(Record record) { for (int i=0; i<record.SubRecords.Count; ++i) { try { Validate(record.subRecords[i]); } catch (Exception ex) { var inner = new RecordValidationException(record, i, ex); _logger.Error( "Validation of subrecord {0} failed for record {1}", i, record ); } } } } There's a few important things to notice: A single error at the deepest level causes three log entries (ugly? DOS?) Thrown exceptions contain all important and useful information Logging only happens when failure to do so would cause loss of useful information at a lower level. Thoughts and concerns: I don't like having so many log entries for each error I don't want to lose important, useful data; the exceptions contain all the important but the stacktrace is typically the only thing displayed besides the message. I can log at different levels (e.g., warning, informational) The higher level classes should be completely unaware of the structure of the lower-level exceptions (which may change as the different implementations are replaced). The information available at higher levels should not be passed to the lower levels. So, to restate the main questions: What are best-practices for logging deep within an application's source? Is it bad practice to have multiple event log entries for a single error?

    Read the article

< Previous Page | 776 777 778 779 780 781 782 783 784 785 786 787  | Next Page >