Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 79/128 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• smbclient -L host works. ping host doesn't work. What is missing

  - by DrorCohen

  I upgrade my ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's netbios name. I get "Unknown Host". However running smbclient -l HostName - give me all the output in the world. Stracing the ping I can it tries to use resolv.conf (expected fail) and then when accessing mdns stuff it fails (no mdns.allow file) and exits. Here's the host line from /etc/nsswitch.conf: hosts: files wins mdns4_minimal [NOTFOUND=return] dns mdns4 I've added wins right after files (and also tried before dns. Nothing helps. Reboot after every change. What am I missing?

  Read the article

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• Losing file permissions after rebooting Windows 7

  - by SMTF

  I have a User directory full of files that are not accessible permission wise for the user who's home directory it is. Said user can't run Explorer. For example, it provides an error complaining that permission is not available for required files. I tried various ways to give said user permission of his home directory and things are fine until after rebooting the machine; the permissions reset to the previous state and the problem persists. I followed the solution outlined here. And again things worked until I reboot the machine. I'm in this mess because I replaced a corrupted user profile as outlined here. The original user and the new replacement on are/where both admin accounts. In case it is relevant I will mention that the Users directory is not on the C volume but a D volume on the same machine. Any insight is appreciated.

  Read the article

• Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

  - by iyl

  I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

  Read the article

• Citrix and Remote Desktop session showing inconsistency after some time - Windows 2003 Server

  - by Nishant

  We have a lab server RDE becomes blank screen after sometime though it connects . When we login , it just shows the blank desktop with nothing visible , just the wallpaper . Citrix takes long time to connect and if it does ( it takes long time "checking credential " screen even ) , it will also show a similar blank screen . Can anyone suggest where/what to look for to trouble shoot this issue . Let me know if u want any further details . The lab works well and fine when we do a reboot and then the same problem happens after an hour or so ...

  Read the article

• Windows 7 fresh install blank screen

  - by Neil Barnwell

  I've just installed Win7 Ultimate to my PC. During the install it reboots a couple of times, but 2nd or 3rd reboot I see the "Starting Windows..." message, but followed by a black screen. No mouse cursor, taskbar, anything. The monitor power light is blue (indicating it has a signal) and it was displaying the setup wizard with no problems whatsoever. Has anyone else witnessed this phenomenon? Many thanks in advance. UPDATE I booted in safe mode, and got a screen saying "Setup is preparing your computer for first use". That's brilliant, although a message box has popped up over that saying: Windows cannot complete instlalation in Safe Mode. To continue installing Windows, restart the computer. So I don't really have the opportunity to do any cleverness with drivers or anything. I guess I could try getting a different version of Win7 (I'm installing from an MSDN DVD).

  Read the article

• Enter response once prompt returns?

  - by mjb

  It's neither a secure idea nor one I'd recommend elsewhere, but I have a situation when occasionally it takes a while for my Ansible ad-hoc command to respond. I'd love to pipe or args or whatever is needed to push the required text into the prompt so I can walk away and know it will finish. Ex: $ ansible all -m shell -a "reboot" --ask-pass Password: blah blah blah it worked I'd love to send an argument or << or something to get the password in. Is that possible?

  Read the article

• Opening ports with IPTables not working - Ubuntu

  - by user41416

  So, I have these rules set in iptables: # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpts:6850:6999 ACCEPT udp -- anywhere anywhere udp dpts:6850:6999 ACCEPT tcp -- anywhere anywhere tcp dpt:6881 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Although, the ports are not open :/ here is a telnet attempt: # telnet localhost 6999 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused Any idea why this is happening? Do I need to reboot or do someone to make the changes permanent? Last time I rebooted the rules disappeared from iptables :/

  Read the article

• How can I change the default keyboard layout in Ubuntu 10.10?

  - by startoftext

  Ubuntu keeps detecting my keyboard layout as Romanian. It almost always does this on a reboot and some times on waking from sleep. Some times it just randomly changes back to Romanian while the computer is on. I always set it back to "USA" in the keyboard preferences and delete the Romanian layout. What files configure this in Ubuntu? I looked in xorg.conf and did not find any keyboard settings. How can I set this to USA permanently? I have a laptop with a typical US layout built in keyboard and I also have an apple keyboard that is also US layout connected via USB. I have run other distributions on this same setup before and never had this happen.

  Read the article

• How to make RHEL have persistent local hdd name?

  - by Mxx

  I have 2 identical Dell R720 servers running identical Oracle Enterprise Linux(RHEL)6.4. Both servers (supposedly) configured in exactly the same way. However, one of the servers is behaving differently. Every other reboot its local HDD name(and related partitions) flip from /dev/sda to /dev/sdj. This is problematic because both servers are configured for multipathd, and if this flip happens their config does not match and Oracle DB(or its clusterware) complains that nodes are not configured identically. Why does one server has a consistent device names while the other server keeps flipping back and forth? How can I make local hdd to consistently be /dev/sda? I suspect this might have something to do with udev but I'm not sure.

  Read the article

• Is there a way to undo deletion of registry keys while the machine is still running?

  - by Oliver Giesen

  [ also posted from a programmer's POV at http://stackoverflow.com/questions/3299230 ] I messed up big time and deleted a large portion of my registry during a programming experiment: As a result most of the contents of HKEY_CURRENT_USER\Software\ are gone. I haven't logged off or shutdown since this happened. The applications that were already running seem to be coping fine so far but I suspect that after the next reboot there won't be much happiness left... Also, System Restore tells me there are no restore points even though I'm pretty sure there should have been. Could this be another symptom of the purged registry? I wouldn't have expected this information to be stored under HKCU, though... Does anybody know of a technique or utility that can possibly restore some or all of the deleted entries? I'm on Windows 7 Enterprise 32bit. I'm not really holding my breath but you can always hope, can't you?

  Read the article

• Replacement for NewSID when working with Windows 7?

  - by sbussinger

  Has anyone got a lead on a replacement for the old SysInternals NewSID utility that will work for Windows 7? I found out the hard way that NewSID will totally hose a Win7 setup (BSOD on reboot). Apparently the same problem occurs for Server 2008 R2. They've officially announced that NewSID will be retired in November, possibly because of this issue. I'm aware of SYSPREP, but it's not a clean replacement in my case so I was hoping that there was another utility similar to NewSID that worked with Win7. Reworking our system to use SYSPREP will be ugly and slower as well. Any thoughts on another alternative? Thanks!

  Read the article

• Ubuntu stops auto-mounting flash drive

  - by Brian

  It seems that after being up for a few days, my Ubuntu system refuses to auto-mount hot-plugged USB disks (i.e. flash drives). The output from dmesg shows that the kernel recognizes the device correctly. The only solution I'm aware of at the moment is to reboot (logging out may work as well, but the impact is the same since I have a bunch of stuff open and it takes a few minutes to get everything situated after startup/login). I thought gvfs-fuse-daemon was the thing responsible for managing filesystems in userspace, but killing and restarting that doesn't help. Any other ideas?

  Read the article

• ISCSI sessions appear from nowhere

  - by Maraca

  Hi, I am using Win2008 32bit Ent. running in Hyper-V with 2 LUNs over ISCSI connection (this is a MS cluster with one LUN being quorum and second as a storage). In ISCSI - target - details I see multiple sessions from same target (currently 7), however I am not sure where they are coming from as I have only one virtual NIC on this server. Sure enough 2 LUNs appear 7 times each in device manager or in disk manager. On the cluster partner however, I do not see that problem. There is only one session per target. Installing MPIO makes only difference - I am getting 8 sessions instead of 7 once I reboot. Does any one know what can cause this behavior?

  Read the article

• How to schedule a task X minutes after Windows Server 2003 starts?

  - by Joe Schmoe

  How to schedule a task X minutes after Windows Server 2003 starts? In "Scheduled Tasks" one can specify "When my computer starts" but I see no way to specify delay. What I am trying to achieve: there is a service (JIRA) that even though dependent on SQL Server service still doesn't wait long enough for SQL Server to become fully operational. So JIRA service fails to connect to the database and needs to be restarted manually after each server reboot. My plan is to add "SC stop" and "SC start" commands for JIRA service 3 minutes after server starts.

  Read the article

• Auto restart server if virtual memory is too low

  - by Sukhjinder Singh

  There are quite number of software running on my server: httpd, varnish, mysql, memcache, java.. Each of them is using a part of the virtual memory and varnish was configured to be allocated 3GB of memory to run. Due to high traffic load which is 100K, our server ran out of memory and oom-killer is invoked. We've to reboot the server. We have 8GB of Virtual Memory and due to some reason we cannot extend to larger memory. My question is - Is there any automated script, which will monitor how much virtual memory left and based upon certain criteria, lets say if 500MB left than restart the server automatically? I do know this is not the proper solution but we have to do it, otherwise we don't know when server will get OOM and by the time we know and restart the server, we lost our visiting users.

  Read the article

• How to efficiently restore Library folder partially deleted on OS X

  - by flow

  I am using OS X Lion, and trying to delete some files I did accidentally (from home directoy): rm -fr Library I realized about this some 15 seconds later and did killall rm Some folders have been deleted, of course, inside "Library". Now the system seems to be ok, but I fear what will happen in case of reboot. I have a Time Machine backup from 5 days ago. I wonder if it would be a good solution, just to copy whole "Library" folder from my home directory from backup and replace this one. Or, what do you think would be the best approach? PS: In order to restore just deleted directories inside "Library", in which order does "rm" start to delete directories, alphabetically?

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• Cannot access internal network on OSX 10.6.6

  - by cabuki

  Last week, I began having trouble connecting to our internal web servers. Usually, a refresh would take care of it or switching to a different wireless network, but as of yesterday, this wasn't enough. We have an internal DNS server using dnsmasq and a private internal host name (us.lcl). Once I started having more issues with the names not resolving, I tried pinging the server. Using the internal host name (s1.us.lcl), it failed. I tried using the IP address, but that also failed. I have no problems accessing external sites with the exception of it being a bit slower than normal. A reboot yesterday at lunch time after following the instructions here seemed to fix the issue, but when I came into the office this morning, it had stopped working. As of this posting, I cannot ping, ssh or access the web server using the internal host name or ip address. I'm the only one running 10.6 in my office and none of my colleagues has this issue.

  Read the article

• Ctrl-Alt-F1 never gives prompt

  - by nispio

  When I press Ctrl+Alt+F1 in my Red Hat Enterprise Linux 6.4 (Santiago) I get a black screen with a blinking cursor, but I never get a login prompt. I can get back to my desktop with Ctrl+Alt+F7, and things work as normal. However, when I run sudo init 3 I get the same thing, but this time I am stuck at the screen and can't get back without a reboot. I'm not even sure where to start looking for the cause of this problem. Are the startup scripts that might be causing the problem or other system configurations that could lead to this? If this is not an known issue, what steps should I take to debug?

  Read the article

• Windows 8 won't load as it has to

  - by MichaelHefner

  I have successfully installed Windows 8 about eight months ago, and all went well. Only the last change I made ??is to set Startmenu8, to get a more normal for the Windows look. Yesterday, my computer screen went dark blue and the mouse does not seem to work. I changed the battery and reboot. But all I get is my desktop, taskbar, and not ikony.Programmy not appear at the bottom, but do not open the maximum so I can not use them. I have a Dell desktop and run the diagnostics on the F12 at startup. All right in line with this. I want to return to the previous item, but can not get in Windows, to do it. Any suggestions gratefully received.

  Read the article

• Error when starting Outlook 2007 on Windows 7

  - by Jared

  Every time I start Outlook 2007 SP2 on my Windows 7 box Outlook will look like its loading fine, then I get this error message: cannot start microsoft office outlook. cannot open the outlook window and outlook will close. I was able to get outlook to start by using outlook.exe /resetnavpane in the Start-Search box, a nice tip which I got from this social.microsoft.com page. But it didn't fix the problem since outlook is still complaining when it starts after a reboot. What can I do to get outlook to startup normally?

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• KVM XML config file

  - by awmusic12635

  I have a KVM server that I expanded the LV of then rebooted. However now when booting I get the error: error: Failed to create domain from /home/kvm/kvmx/kvmx.xml error: (domain_definition):1: Document is empty (null) ^ It appears the config file still exits however it is now empty. I attempted to replace the contents of the file with the correct previous information however it continues to wipe it on attempt to boot and fails again with the same error. How would I got about solving this so the file doesn't get wiped on every reboot? OS: Centos 6 64bit I would appreciate any help you may have.

  Read the article

• ASUS N550 laptop not charging on ubuntu after updating kernel

  - by OBY Trance

  I'm using Ubuntu 13.10 on a pretty new ASUS N550jv laptop. When I was using kernel linux-image-3.11.0-11 everything was quite well (kinda..), however, when I updated the kernel using the automatic update, the kernels which were released afterwards (12+) were faulty on my machine, and caused the battery not to be charged and only stay at their current charging level (even when the machine was off!) The only fix I had was to roll-back to the '..11' version (on boot screen - advanced options), and hard-reboot (AC cord disconnected and reconnected) but now version 14 was released and "pushed away" the good old version 11. How can I fix that?? Please help me...

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >