Search Results

Search found 33445 results on 1338 pages for 'single instance storage'.

Page 790/1338 | < Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >

• Connecting to a 2.5" laptop drive using USB

  - by user27449

  So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

  Read the article

• Windows server 2003SP2 as LDAP replica master for Mac OSX 10.6

  - by FrancoR

  Hello there, we have a single domain controller with Windows 2003 with few child. All the users are in the main DC. We have already created a connection from AD to Mac Xserve 10.6 and can read all the users, but: 1. If the DC goes down (or the net), Mac lose all the users, so no file access, no emails, no nothing. 2. the users are in read only. Mac admin cannot reset password, change attribute and so on. What we need is a stable environment where both AD admins and LDAP admins can manage the users; if one server goes offline the users of the other server should work (email, shared folders) just fine. Thanks in advance P.S. we already tried to connect the MacOSX to Windows LDAP, instead of AD, but we're unable to do it: MacOSX requires DNS IP (gotcha), user admin and password (ok) and a root LDAP password we're unable to find any reference of it in Windows 2003.

  Read the article

• Installing WiFi in a church for internet access

  - by Dave Griffiths

  Hi, a colleague at work asked this question: My local church want to get WiFi enabled in the whole of their offices and main church building. The offices and main building are in the same overall structure and so the signal does not need to travel outside to any other buildings outside this main structure. Where would I start on such a project and what kind of repeaters are needed (and how are they set up) given that some of the walls are pretty thick. Do you still have one ADSL line coming in to router or are there some options of having two lines coming in so that they isn't a single point of failure. Am looking at fibre for the broadband for increased speed. Any starting pointers appreciated.

  Read the article

• Clicking on a link in Chrome opens up Notepad

  - by jonsca

  I'm currently using Chrome 21.0.1180.89 on Windows 7, but I have noticed this behavior in other versions before. Probably about one time in a hundred, I will click on a link on a website and an instance of Notepad will open up with a blank page rather than the browser going to the link. To my knowledge, I have no malware or viruses on the machine that could be causing this. It's a minor annoyance, so I'm not very concerned about it, but I'm wondering if there could be a MIME type that's set wrong by default in the browser?

  Read the article

• Grub gives messages about the boot sector being used by other software. What should I do?

  - by Bobble

  This only happens with one of my computers. It is an elderly laptop that has had a long and varied history with several operating systems, but in its retirement it is acting as a server for my home network using Ubuntu 12.04. It is a single-boot system, there are no other systems installed. Every so often, whenever there is a grub upgrade, I notice a message like this: Setting up grub-common (1.99-21ubuntu3.4) ... Installing new version of config file /etc/grub.d/00_header ... Setting up grub2-common (1.99-21ubuntu3.4) ... Setting up grub-pc-bin (1.99-21ubuntu3.4) ... Setting up grub-pc (1.99-21ubuntu3.4) ... /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track. Installation finished. No error reported. Should I be worried about this? What (if anything) should I do about it?

  Read the article

• Is there a browser independet bookmarktool supporting tags, date and free comments?

  - by bernd_k

  I am looking for a tool, which helps me to organize my personal bookmarks. I want to be able to assign tags and free comments to a bookmark. I want to search my bookmarks by tags date of bookmarking pattern in title pattern in url It would be nice to be web based to enable sharing my bookmarks between different machines. But for it would be OK, if it works on a single machine as long as it has some import/export way to transfer the links to a new machine replacing the old. As browsers I'm using Firefox and ChromePlus. It would be nice, if the solution works with both browsers. With free comments, I mean additional remarks stored for a bookmark, which is not essential for searching.

  Read the article

• SQL Server Configuration Scripting Utility Release 9

  - by Bill Graziano

  There’s another update to my little utility to script a SQL Server’s configuration.  I use this for two purposes.  First, I use it to keep my database mirroring servers up to date.  Second, I capture the output in a version control system and keep that for historical reference. In release 3.0.9 I made the following changes: Rewrote the encrypted trigger scripting.  It will now list the encrypted triggers in a comment in the table script but can’t actually script them. It now scripts any server event notifications. You can script a single database using the /scriptdb flag.  Please note that it will also script the instance and system databases when it does this. It will script any user-defined endpoints.  This will capture your mirroring endpoints and more importantly any service broker endpoints. It will gracefully skip database mail on the Express Edition. It still doesn’t support SQL Server 2012.  I think that’s the next feature to add though.

  Read the article

• Touchscreen on KDE and Ubuntu?

  - by The Quantum Physicist

  I just bought a Lenovo Yoga 2 Pro... I liked the activity of the touchscreen on Windows, and it makes sense as it does on my smart phone. However, I'm not a regular windows user, so I installed Kubuntu 14.04, and everything looks fine, except that the activity of the touchscreen is so silly that it's useless. Why? Because all the touchscreen does is a single mouse with left click. For example, if I touch the screen for a relatively long time, I don't get the effect of a right click. How do I configure the touchscreen properly to get the activity expected on Ubuntu and KDE? Thanks for any efforts.

  Read the article

• Any need to make backup of data on Amazon S3?

  - by Chrille

  I'm hosting 200 GB of product images at S3 (this is my primary file host). Do I need to back that data up somewhere else, or is S3 safe as it is? I have been experimenting with mounting the S3 bucket to a EC2 instance, and then making a nightly rsync backup. The problem is that it's about 3 million files, so it takes a while to generate the different rsync needs. The backup actually takes about 3 days to complete. Any ideas how to do this better? (if it's even necessary?)

  Read the article

• Activating ssl on tomcat

  - by toom

  I want to encrypt the http traffic on a tomcat instance via ssl. Therefore I followed the most simplistic approach described on various webpages. But anyway it simply does not work. Here is what I did: "keytool -genkey -alias tomcat -keyalg RSA" and I enterd "changeit" as the password (since this is the defaut chosen by tomcat) Altering $CATALINA_HOME/conf/servers.xml by uncommenting the following line Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS"/ Restarting tomcat Entering https://localhost:8443 does not work. However, I can still access the page via normal http like http://localhost:8080 The logfile does not contain any suspicious information. What is going wrong here?

  Read the article

• how to compare files/directories of 2 separate solaris boxes ?

  - by chz

  Hi Friends I have 2 solaris boxes and I need to check certain directories (on local filesystem and mounted nfs) to make sure that they match up on both boxes and to delete or move the other mismatches to elsewhere on the local filesystem. I investigated for unix commands like rsync, and tree but it appears that these commands are not supported on my Solaris boxes. What is the best approach to this problem with the least pain to solve it ? to use rsync, tree and then diff the outputs or find ? I have trouble limiting the find command to certain directories as there are mounted folders that contain too many xml files that I don't care to much in that directory. What's the find command to search multiple directory paths on a single find command. Thanks Sincerely

  Read the article

• Why do Apache access logs - timer resolution issue?

  - by Rob

  When going through Apache 2.2 access logs, logging with the %D directive (The time taken to serve the request, in microseconds), that it's very common for a 200 response to have a given number of bytes, but a "time to serve" of zero. For example, a given URL might be requested 10 times in a single day, and a 200 response is sent for them all, and all return, say 1000 bytes. However, 7 of them have a "time to serve" of zero, while the other 3 have a time to serve of 1 second. Is this simply because the request was served faster than the resolution of the timer Apache uses?

  Read the article

• Hard-drive will randomly fail to load GRUB. Booting a live USB/CD fixes the issue temporarily

  - by Usagi

  I am running 12.04 64-bit and am dual booting with Win7, for full disclosure, although I suspect that has nothing to do with my problem. Occasionally the boot-loader(GRUB) will fail to load and I will be presented with a black screen with a single blinking line. There is no apparent pattern although I suspect there is one and it is related to a program I am running. This has happened to me eight out of ten power cycles now and I can fix it consistently, however, I have no idea why it happens. My current fix is to boot a live CD (I've tried both KNOPPIX and Ubuntu with the same result) and that's it. Somehow booting with the live CD is enough to "wake-up" my hard drive. I then reboot and GRUB magically appears again. So what is going on? Is it possible that a program is corrupting my MBR and the live CD is restoring it? How can I narrow down the possibilities? Thanks. Additional: This is still a problem. I'm convinced now that it is not hardware related as I've spent the last month and several boot cycles on Windows without a hiccup. Recently when I started using Ubuntu again the problem started again. I am more interested in figuring out what is going on rather than actually fixing the problem. Are there any tools, logs, etc. I can use to unravel this mystery?

  Read the article

• How can I tell which laptop touch-screens work well with a stylus (for drawing/taking notes)?

  - by BlueRaja

  I'm looking for a laptop with a touch-screen and stylus for drawing/note-taking. I've read the difference between the different kinds of styluses, but that's only half the story - what about the touch-screen? How do I know if the touch-screen supports "palm-rejection"? Or if the included stylus is a capacitive stylus or a "Wacom digitizer"? Or if the screen will even support Wacom? How can I tell how accurate the touch-screen is (from my testing, some definitely seem to have higher "resolution" than others)? Is there anything else I should be looking at? I don't see any of this information on, for instance, the Newegg specs page for a laptop.

  Read the article

• what does the 'm' unit in munin mean?

  - by nbv4

  I'm using munin as a tool for monitoring my servers. On some of the graphs, the units are marked with a 'm'. For instance, my apache accesses graph is labeled 100m, 200m, 300m, along the y-axis. What does the 'm' mean? I understand 'M' (caps) is mega as in megabytes, the 'k' is kilo, the 'G' is giga, but what about 'm'? At first I thought it was million, but theres no way apache is serving 100 million accesses even per decade.

  Read the article

• Fix X11 forwarding on OSX

  - by Such

  I am looking for a way to fix/debug a X11 forwarding session on OSX. Here is my situation: From my mac I connect to a Ubuntu workstation with ssh -X (tried ssh -Y as well). X11 forwarding works perfectly with firefox for instance, X11/Quartz is started automatically on OSX and firefox is displayed. X11 forwarding does not work with bat (Bacula graphical console): X11 is started but no window is displayed. There are no errors (/private/var/log/system.log). When I try doing the same from another Ubuntu workstation, it works perfectly for both firefox and bat. I guess the problem is on OSX side then. I tried switching some options in X11 but nothing works. Would you have any idea on how to move forward? Thanks!

  Read the article

• How to disable the link MissingFile on Shotwell

  - by user86865

  I have some personal photos which are encrypted by CryptKeeper. I doesn't like to disclose them to anyone. Whenever i lke to view them, I mount them using CryptKeeper. I need to include these photos in Shotwell photo manager at the time of mounting. So, I mounted them using CryptKeeper. Then I imported them to Shotwell. I made a new event and etc to organize and view those photos. After that I unmounted them using CryptKeeper because someone may see it. Now I don't want any single trail on Shotwell beacuse of the same problem. But there is a new button 'MissingFiles' appeared and when i clicked on it, all the photo thumbnail which i unmounted showed there. I dont't want right'click on them and select 'remove from library'; beacuse when i want to view them next time on Shotwell, I need to import, organize, etc at that time. So, the only option here is to disable the unavailability of that MisssingFiles button.

  Read the article

• How to use ccache selectively?

  - by Anonymous

  I have to compile multiple versions of an app written in C++ and I think to use ccache for speeding up the process. ccache howtos have examples which suggest to create symlinks named gcc, g++ etc and make sure they appear in PATH before the original gcc binaries, so ccache is used instead. So far so good, but I'd like to use ccache only when compiling this particular app, not always. Of course, I can write a shell script that will try to create these symlinks every time I want to compile the app and will delete them when the app is compiled. But this looks like filesystem abuse to me. Are there better ways to use ccache selectively, not always? For compilation of a single source code file, I could just manually call ccache instead of gcc and be done, but I have to deal with a complex app that uses an automated build system for multiple source code files.

  Read the article

• What causes Remote Desktop Services Manager to crash in Server 2008 R2?

  - by milkmood

  I have this consistent problem of RDSM crashing in Server 2008 R2. It is either really slow to open, sometimes never opens, or after it's been open and working properly for a bit, stops working, and forces an unload of the snap-in. It's done this since the deployment of this server, new hardware, new instance of S2k8. Domain Administrator login. I am using it to manage 3 Terminal Servers, the other two are S2k3. I've used it without issues on other 2008 servers.

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Number of malicious attacks defended/done on the average user daily [closed]

  - by DalexL

  As a web hoster, it is very easy to notice the large amounts of exploit/abuse attempts done on my servers. Out of curiosity, how often are these attempts done on the average user? I'm assuming almost all of them are prevented just by simple security protocols in place by their browsers, local network, etc. How many attempts, on average, are committed against a single user daily through any method? (email, internet, downloads, etc.)? If known, what percentage of these things are blocked by the average users security? I tried googling but I was having a hard time getting the right search terms together.

  Read the article

• SourceMonitor Beta Test Version 3.3.2.261 now available

  - by TATWORTH

  Source Monitor is a useful independent utility for producing code metrics. Beta Test Version 3.3.2.261 has been released.Download and test Source Monitor beta (Version 3.3.2.261 - 2.30 MBytes)  via HTTP"The Beta page is at http://www.campwoodsw.com/smbeta.htmlHere is the official description of it>The freeware program Source Monitor lets you see inside your software source code to find out how much code you have and to identify the relative complexity of your modules. For example, you can use Source Monitor to identify the code that is most likely to contain defects and thus warrants formal review. Source Monitor, written in C++, runs through your code at high speed. Source Monitor provides the following: Collects metrics in a fast, single pass through source files.Measures metrics for source code written in C++, C, C#, VB.NET, Java, Delphi, Visual Basic (VB6) or HTML.Includes method and function level metrics for C++, C, C#, VB.NET, Java, and Delphi. Offers Modified Complexity metric option. Saves metrics in checkpoints for comparison during software development projects.Displays and prints metrics in tables and charts, including Kiviat diagrams.Operates within a standard Windows GUI or inside your scripts using XML command files.Exports metrics to XML or CSV (comma-separated-value) files for further processing with other tools.

  Read the article

• What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

  - by Ogapo

  I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

  Read the article

• Is it preferable to use POP or IMAP to check multiple google mail accounts from one?

  - by Adam Tuttle

  I have email accounts on several domains that use Google Mail, and thus far I've only ever used POP to send and receive mail from a single inbox. This is quite functional, and as long as I remember to select the appropriate FROM address when starting a new thread, mostly works without any additional thought: messages received on account A are replied to via account A, and so on. My only complaint is the lag -- I've seen sometimes as much as a half hour between messages arriving in an inbox before being imported into my primary inbox via POP. My question is this: Google also supports IMAP. Would that be in any way preferable over POP access? Reduced lag would be nice, but not at a general speed cost, if everything I do has to check another mailbox too.

  Read the article

• Advised auditing method for MS SQL to track changes made to a specific table by a specific user?

  - by scape

  What is the best method for tracking changes or logging the queries done to a table by a specific user when the person is using Management Studio? I'm using 2008 R2 Express Edition and want to specifically track a single user who logs in through Management studio and runs queries to make changes manually. I want to see what query was run and thus determine what was changed and how. I am not interested in restoring the information. I considered Change Tracking but read that it is not ideal for auditing as well I am unsure how to read the data, then I considered the Bulk-Logging option on the database however I then have to consider handling the log files which may grow huge as the database is used constantly by a web app. I am wondering if there is a more concise method to do what I want?

  Read the article

< Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >