Search Results

Search found 22139 results on 886 pages for 'security testing'.

Page 808/886 | < Previous Page | 804 805 806 807 808 809 810 811 812 813 814 815  | Next Page >

• Win7 x64 unresponsive for a minute or so. HD failing?

  - by Gaia

  On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

  Read the article

• Sendmail SMART_HOST not working

  - by daniel

  Hello, I've defined SMART_HOST to be a specific server, lets call it foo.bar.com. However, when I send a test mail using 'sendmail -t', sendmail tries to use mx.bar.com, which subsequently rejects my mail. I've verified that foo.bar.com works and that mx.bar.com does not work (yay telnet). I've recompiled sendmail.mc vi make, make -C and m4. I've verified the DS entry in sendmail.cf. I've restarted sendmail correctly. I'm not sure how to proceed at this point. Any ideas? Here is my SMART_HOST line: define(SMART_HOST',foo.bar.com')dnl ...and here is the result of a test mail. It never tries to use foo.bar.com, instead it uses mx.bar.com. $ echo subject: test; echo | sendmail -Am -v -flocaluser -- [email protected] subject: test [email protected]... Connecting to mx.bar.com via relay... 220 mx.bar.com ESMTP >>> EHLO myhost.bar.com 250-mx.bar.com 250-8BITMIME 250 SIZE 52428800 >>> MAIL From:<[email protected]> SIZE=1 250 sender <[email protected]> ok >>> RCPT To:<[email protected]> 550 #5.1.0 Address rejected. >>> RSET 250 reset localuser... Connecting to local... localuser... Sent Closing connection to mx.bar.com. >>> QUIT 221 mx.bar.com And last, here is a test mail sent using foo.bar.com: $ hostname myhost.bar.com $ telnet foo.bar.com 25 Trying ***.***.***.***... Connected to foo.bar.com (***.***.***.***). Escape character is '^]'. 220 foo.bar.com ESMTP Sendmail 8.14.1/8.14.1/ITS-7.0/ldap2-1+tls; Tue, 21 Dec 2010 13:27:44 -0700 (MST) helo foo 250 foo.bar.com Hello myhost.bar.com [***.***.***.***], pleased to meet you mail from: [email protected] 250 2.1.0 [email protected]... Sender ok rcpt to: [email protected] 250 2.1.5 [email protected]... Recipient ok data 354 Enter mail, end with "." on a line by itself testing . 250 2.0.0 oBLKRikZ003758 Message accepted for delivery quit 221 2.0.0 foo.bar.com closing connection Connection closed by foreign host. Any ideas? Thanks

  Read the article

• What's the best way to do user profile/folder redirect/home directory archiving?

  - by tpederson

  My company is in dire need of a redesign around how we handle user account administration. I've been tasked with automating the process. The end goal is to have the whole works triggered by the business, and IT only looking in when there's an error reported. The interim phase is going to be semi-manual. That is a level 2 tech inputs the user's info and supervises the process. The current hurdle I'm facing is user profile archiving. Our security team requires us to archive the profile directories for any terminated user for 60 days in case the legal team requires access to their files. Our AD is as much a mess as everything else, so there are some users with home directories and some with profiles. Anyone who has a profile dir in AD also has a good deal of their profile redirected to our file servers over DFS. In order to complete the process manually you find the user in AD, disable them, find their home/profile dir, go there and take ownership, create an archive folder, move all their files over, then delete the old dir. Some users have many many gigs of nonsense and this can take quite some time. Even automated the process would not be a quick one. I'm thinking that I need to have a client side C# GUI for the quick stuff and some server side batch script or console app to offload this long running process. I have a batch script that works decently using takeown and robocopy, but I wonder if a C# console app would do a better job. So, my question at long last is, what do you think is the best way to handle this? I can't imagine this is a unique problem, how do other admins get this done? The last place I worked was easily 10x larger than the place I'm in now. If we would have been doing this manual crap there, they'd have needed a team of at least 30 full time workers to keep up. I have decent skills in C#.net and batch scripting, but am a quick study and I have used most every language once or twice. Thank you for reading this and I look forward to seeing what imaginative solutions you all can come up with.

  Read the article

• Why might one host be unable to access the Internet, when it can ping the router and when all other hosts can?

  - by user1444233

  I have a Draytek Vigor 2830n. It's kicking out a 192.168.3.0 LAN. It performs load-balancing across dual-WAN ports, although I've turned off the second WAN to simplify testing. There are many hosts on the LAN. All IPs are allocated through DHCP, most freely allocated from the pool, but one or two are bound to NIC MAC addresses. All hosts can access the Internet, save one. That host (192.168.3.100 or 'dot100' for short) gets allocated an IP address (and the right gateway address, DNS server addresses, subnet etc.) dot100 can ping itself. It can ping the gateway, and access the latter's web interface via port 80. It's responsive and loss-free (sustained ping over a couple of minutes reports no data loss). Yet, for some reason that evades me, dot100 can't ping an external IP address or domain name. I suspect it's never been able to, because it was getting some Internet access from a second adaptor (different subnet), but that's now been turned off, which exposed the problem. In dot100, I've tried: two operating systems (Windows 8 and Knoppix), to rule out anti-virus programs etc. two physical adaptors two cables, on each adaptor two IPs (e.g. .100 and .103 assigned by Mac and .26 from the pool) both dynamic and assigned (MAC-bound) DHCP-allocated IPs but none of this experiments yielded any variation in the result. dot100 is a crucial host. It's a file server for the network, so I need it to be reliably allocated a consistent IP. Can anyone offer a potential solution or a way forward with the analysis please? My guess My analysis so far leads me to believe it's a router issue. I've checked the web interface very carefully. There are no filters setup in Firewall - General Setup or Filter Setup. I suspect it's a corrupted internal routing table, but the web UI shows this as the Routing table: Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 62.XX.XX.X WAN1 * 62.XX.XX.X/ 255.255.255.255 via 62.XX.XX.X WAN1 S 82.YY.YYY.YYY/ 255.255.255.255 via 82.YY.YYY.YYY WAN1 C 192.168.1.0/ 255.255.255.0 directly connected WAN2 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2

  Read the article

• How do i enable innodb on ubuntu server 10.04

  - by Matt

  Here is my entire my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] key_buffer = 224M sort_buffer_size = 4M read_buffer_size = 4M read_rnd_buffer_size = 4M myisam_sort_buffer_size = 12M query_cache_size = 44M # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # #key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M #query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ And here is my show engines call....i have no idea what i need to do to enable innodb show engines; +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | Engine | Support | Comment | Transactions | XA | Savepoints | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | MyISAM | DEFAULT | Default engine as of MySQL 3.23 with great performance | NO | NO | NO | | MRG_MYISAM | YES | Collection of identical MyISAM tables | NO | NO | NO | | BLACKHOLE | YES | /dev/null storage engine (anything you write to it disappears) | NO | NO | NO | | CSV | YES | CSV storage engine | NO | NO | NO | | MEMORY | YES | Hash based, stored in memory, useful for temporary tables | NO | NO | NO | | FEDERATED | NO | Federated MySQL storage engine | NULL | NULL | NULL | | ARCHIVE | YES | Archive storage engine | NO | NO | NO | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ 7 rows in set (0.00 sec)

  Read the article

• How do I permanently delete e-mail messages in the sendmail queue and keep them from coming back?

  - by Steven Oxley

  I have a pretty annoying problem here. I have been testing an application and have created some test e-mails to bogus e-mail addresses (not to mention that my server isn't really set up to send e-mail anyway). Of course, sendmail is not able to send these messages and they have been getting stuck in the sendmail queue. I want to manually delete the messages that have been building up in the queue instead of waiting the 5 days that sendmail usually takes to stop retrying. I am using Ubuntu 10.04 and /var/spool/mqueue/ is the directory in which every how-to I have read says the e-mails that are queued up are kept. When I delete the files in this directory, sendmail stops trying to process the e-mails until what appears to be a cron script runs and re-populates this directory with the messages I don't want sent. Here are some lines from my syslog: Jun 2 17:35:19 sajo-laptop sm-mta[9367]: o530SlbK009365: to=, ctladdr= (33/33), delay=00:06:27, xdelay=00:06:22, mailer=esmtp, pri=120418, relay=e.mx.mail.yahoo.com. [67.195.168.230], dsn=4.0.0, stat=Deferred: Connection timed out with e.mx.mail.yahoo.com. Jun 2 17:35:48 sajo-laptop sm-mta[9149]: o4VHn3cw003597: to=, ctladdr= (33/33), delay=2+06:46:45, xdelay=00:34:12, mailer=esmtp, pri=3540649, relay=mx2.hotmail.com. [65.54.188.94], dsn=4.0.0, stat=Deferred: Connection timed out with mx2.hotmail.com. Jun 2 17:39:02 sajo-laptop CRON[9510]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm) Jun 2 17:39:43 sajo-laptop sm-mta[9372]: o52LHK4s007585: to=, ctladdr= (33/33), delay=03:22:18, xdelay=00:06:28, mailer=esmtp, pri=1470404, relay=c.mx.mail.yahoo.com. [206.190.54.127], dsn=4.0.0, stat=Deferred: Connection timed out with c.mx.mail.yahoo.com. Jun 2 17:39:50 sajo-laptop sm-mta[9149]: o51I8ieV004377: to=, ctladdr= (33/33), delay=1+06:31:06, xdelay=00:03:57, mailer=esmtp, pri=6601668, relay=alt4.gmail-smtp-in.l.google.com. [74.125.79.114], dsn=4.0.0, stat=Deferred: Connection timed out with alt4.gmail-smtp-in.l.google.com. Jun 2 17:40:01 sajo-laptop CRON[9523]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Does anyone know how I can get rid of these messages permanently? As a side note, I'd also like to know if there is a way to set up sendmail to "fake" sending e-mail. Is there?

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David Boike

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• Different files on shared partition?

  - by Matt Robertson

  I am dual-booting Windows 8 and Ubuntu 12.04. My partition scheme looks like this: /dev/sda1 - Windows 8 (nfts) /dev/sda2 - Ubuntu / (ext4) /dev/sda3 - Ubuntu home (ext4) /dev/sda5 - swap /dev/sda6 - Shared data partition (exfat) (First off, yes I do have exfat libraries installed on Ubuntu) I created some PNG images in Windows and saved them on my shared partition. From Ubuntu, I edited the images in GIMP and saved them (replacing the ones on the shared partition). When I boot into Windows, the files appear unchanged - exactly like they did before I edited them from Ubuntu. I even added a folder and deleted some other files, but none of these changes exist in Windows. When I boot into Ubuntu, all of the changes are still there. It is as if Windows is caching the old file structure... How is this possible? Thanks in advance. Edit -- commands output ~~ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk +-sda1 8:1 0 165.1G 0 part +-sda2 8:2 0 21.3G 0 part / +-sda3 8:3 0 98.9G 0 part /home +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 7.8G 0 part [SWAP] +-sda6 8:6 0 172.7G 0 part /mnt/shared_data ~~ /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # /dev/sda2 UUID=8f700f65-b5c7-4afc-a6fb-8f9271e0fb5e / ext4 errors=remount-ro 0 1 # /dev/sda3 UUID=f0d688b7-22bd-4fa7-bc1b-a594af2933fa /home ext4 defaults 0 2 # /dev/sda5 UUID=3bc2399b-5deb-4f04-924b-d4fc77491997 none swap sw 0 0 # /dev/sda6 UUID=F2DE-BC47 /mnt/shared_data exfat defaults 0 3 ~~ /etc/mtab /dev/sda2 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /home ext4 rw 0 0 /dev/sda6 /mnt/shared_data fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matt/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matt 0 0

  Read the article

• Legacy VB6 application under Win7 SQL error

  - by Shial

  We have a rather unfortunate legacy application at work, written originally in VB6 it predates anybody in our IT department by at least 5 years. We have a contracted developer for ongoing maintenance and where he can he rewrites sections over into .NET code (Not sure about his techniques here, this is a side job for his regular work as an IBM engineer) the application works fine (such as it is) under windows XP. We have only a couple of Windows 7 machines mainly for testing and this application seems to run into a wall. Things like the background not loading and SQL errors. This is even running under administrator. Running an SQL trace from the ODBC control panel shows several interesting things. It makes a connection to the database successfully initially where it runs a query to determine if it is running the correct version. This query works fine. 558-1af0 ENTER SQLExecDirectW HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 BMS 558-1af0 EXIT SQLExecDirectW with return code 1 (SQL_SUCCESS_WITH_INFO) HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 It then seems to drop its connection and can't find the ODBC connection despite the fact its connecting to the same DB. From the trace it looks like it configures the connection then it starts firing off SQLFreeStmt to unbind and close out then when in the application and it tries to do its thing there is no connection. 558-1af0 ENTER SQLFreeStmt HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> BMS 558-1af0 EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS) HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> Then this happens when I try to do something that pulls data 558-1af0 ENTER SQLDriverConnectW HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> BMS 558-1af0 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR) HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> DIAG [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (0) Nearly all of my searching on this issue comes up with programming issues where the connection string has a problem. The only thing that is different in this particular scenario though is Windows 7, I know the connection string is fine since it works on the XP machines. The VB components are supposed to be still functional under Win7. My computer is running 32 bit win7 and my VP is running Win7 64 bit and both have the same problem so that can be ruled out. I have already tried reinstalling the SQL Native Client and the VB runtime as well as the application in question. Hopefully I can find a solution and not have to resort to using the XP VM.

  Read the article

• Windows 2003 GPO Software Restrictions

  - by joeqwerty

  We're running a Terminal Server farm in a Windows 2003 Domain, and I found a problem with the Software Restrictions GPO settings that are being applied to our TS servers. Here are the details of our configuration and the problem: All of our servers (Domain Controllers and Terminal Servers) are running Windows Server 2003 SP2 and both the domain and forest are at Windows 2003 level. Our TS servers are in an OU where we have specific GPO's linked and have inheritance blocked, so only the TS specific GPO's are applied to these TS servers. Our users are all remote and do not have workstations joined to our domain, so we don't use loopback policy processing. We take a "whitelist" approach to allowing users to run applications, so only applications that we approve and add as path or hash rules are able to run. We have the Security Level in Software Restrictions set to Disallowed and Enforcement is set to "All software files except libraries". What I've found is that if I give a user a shortcut to an application, they're able to launch the application even if it's not in the Additional Rules list of "whitelisted" applications. If I give a user a copy of the main executable for the application and they attempt to launch it, they get the expected "this program has been restricted..." message. It appears that the Software Restrictions are indeed working, except for when the user launches an application using a shortcut as opposed to launching the application from the main executable itself, which seems to contradict the purpose of using Software Restrictions. My questions are: Has anyone else seen this behavior? Can anyone else reproduce this behavior? Am I missing something in my understanding of Software Restrictions? Is it likely that I have something misconfigured in Software Restrictions? EDIT To clarify the problem a little bit: No higher level GPO's are being enforced. Running gpresults shows that in fact, only the TS level GPO's are being applied and I can indeed see my Software Restictions being applied. No path wildcards are in use. I'm testing with an application that is at "C:\Program Files\Application\executable.exe" and the application executable is not in any path or hash rule. If the user launches the main application executable directly from the application's folder, the Software Restrictions are enforced. If I give the user a shortcut that points to the application executable at "C:\Program Files\Application\executable.exe" then they are able to launch the program. EDIT Also, LNK files are listed in the Designated File Types, so they should be treated as executable, which should mean that they are bound by the same Software Restrictions settings and rules.

  Read the article

• Apache/2.2.20 (Ubuntu 11.10) gzip compression won't work on php pages, content is chunked

  - by FamousInteractive

  I'm running into a problem with a new production server whereto I'm transferring projects. The HTML output of the PHP applications isn't compressed by the Apache mod_deflate module. Other resources, as stylesheet and javascript files, even html pages, which are served with the same Content-type (text/html) as the PHP output, are compressed! The projects use the following rules (from HTML5 boilerplate) in the .htaccess: <IfModule mod_deflate.c> # Force deflate for mangled headers developer.yahoo.com/blogs/ydn/posts/2010/12/pushing-beyond-gzipping/ <IfModule mod_setenvif.c> <IfModule mod_headers.c> SetEnvIfNoCase ^(Accept-EncodXng|X-cept-Encoding|X{15}|~{15}|-{15})$ ^((gzip|deflate)\s*,?\s*)+|[X~-]{4,13}$ HAVE_Accept-Encoding RequestHeader append Accept-Encoding "gzip,deflate" env=HAVE_Accept-Encoding </IfModule> </IfModule> # HTML, TXT, CSS, JavaScript, JSON, XML, HTC: <IfModule filter_module> FilterDeclare COMPRESS FilterProvider COMPRESS DEFLATE resp=Content-Type $text/html FilterProvider COMPRESS DEFLATE resp=Content-Type $text/css FilterProvider COMPRESS DEFLATE resp=Content-Type $text/plain FilterProvider COMPRESS DEFLATE resp=Content-Type $text/xml FilterProvider COMPRESS DEFLATE resp=Content-Type $text/x-component FilterProvider COMPRESS DEFLATE resp=Content-Type $application/javascript FilterProvider COMPRESS DEFLATE resp=Content-Type $application/json FilterProvider COMPRESS DEFLATE resp=Content-Type $application/xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/xhtml+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/rss+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/atom+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $application/vnd.ms-fontobject FilterProvider COMPRESS DEFLATE resp=Content-Type $image/svg+xml FilterProvider COMPRESS DEFLATE resp=Content-Type $image/x-icon FilterProvider COMPRESS DEFLATE resp=Content-Type $application/x-font-ttf FilterProvider COMPRESS DEFLATE resp=Content-Type $font/opentype FilterChain COMPRESS FilterProtocol COMPRESS DEFLATE change=yes;byteranges=no </IfModule> </IfModule> We have a testing machine that runs the same Apache, OS and PHP version. On that machine the compression works just fine on the PHP output. I've checked and compared Apache and PHP config files, all the same as far as I can tell. I've tried several manners of outputting the content of the PHP, using output buffering or just plain echoing the content. Same thing, no compression. Example response headers of a PHP output: HTTP/1.1 200 OK Date: Wed, 25 Apr 2012 23:30:59 GMT Server: Apache Accept-Ranges: bytes Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: public Pragma: no-cache Vary: User-Agent Keep-Alive: timeout=5, max=98 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=utf-8 Example of response headers on a css file: HTTP/1.1 200 OK Date: Wed, 25 Apr 2012 23:30:59 GMT Server: Apache Last-Modified: Mon, 04 Jul 2011 19:12:36 GMT Vary: Accept-Encoding,User-Agent Content-Encoding: gzip Cache-Control: public Expires: Fri, 25 May 2012 23:30:59 GMT Content-Length: 714 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/css; charset=utf-8 Does anyone has a clue or experienced the same "problem"? thanks!

  Read the article

• Suspicious process running under user named

  - by Amit

  I get a lot of emails reporting this and I want this issue to auto correct itself. These process are run by my server and are a result of updates, session deletion and other legitimate session handling reported as false positives. Here's a sample report: Time: Sat Oct 20 00:00:03 2012 -0400 PID: 20077 Account: named Uptime: 326117 seconds Executable: /usr/sbin/nsd\00507d27e9\0053\00\00\00\00\00 (deleted) The file system shows this process is running an executable file that has been deleted. This typically happens when the original file has been replaced by a new file when the application is updated. To prevent this being reported again, restart the process that runs this excecutable file. See csf.conf and the PT_DELETED text for more information about the security implications of processes running deleted executable files. Command Line (often faked in exploits): /usr/sbin/nsd -c /etc/nsd/nsd.conf Network connections by the process (if any): udp: xx.xx.xxx.xx:53 -> 0.0.0.0:0 udp: 127.0.0.1:53 -> 0.0.0.0:0 udp: xx.xx.xxx.xx:53 -> 0.0.0.0:0 tcp: xx.xx.xxx.xx:53 -> 0.0.0.0:0 tcp: 127.0.0.1:53 -> 0.0.0.0:0 tcp: xx.xx.xxx.xx:53 -> 0.0.0.0:0 Files open by the process (if any): /dev/null /dev/null /dev/null Memory maps by the process (if any): 0045e000-00479000 r-xp 00000000 fd:00 2582025 /lib/ld-2.5.so 00479000-0047a000 r--p 0001a000 fd:00 2582025 /lib/ld-2.5.so 0047a000-0047b000 rw-p 0001b000 fd:00 2582025 /lib/ld-2.5.so 0047d000-005d5000 r-xp 00000000 fd:00 2582073 /lib/i686/nosegneg/libc-2.5.so 005d5000-005d7000 r--p 00157000 fd:00 2582073 /lib/i686/nosegneg/libc-2.5.so 005d7000-005d8000 rw-p 00159000 fd:00 2582073 /lib/i686/nosegneg/libc-2.5.so 005d8000-005db000 rw-p 005d8000 00:00 0 005dd000-005e0000 r-xp 00000000 fd:00 2582087 /lib/libdl-2.5.so 005e0000-005e1000 r--p 00002000 fd:00 2582087 /lib/libdl-2.5.so 005e1000-005e2000 rw-p 00003000 fd:00 2582087 /lib/libdl-2.5.so 0062b000-0063d000 r-xp 00000000 fd:00 2582079 /lib/libz.so.1.2.3 0063d000-0063e000 rw-p 00011000 fd:00 2582079 /lib/libz.so.1.2.3 00855000-0085f000 r-xp 00000000 fd:00 2582022 /lib/libnss_files-2.5.so 0085f000-00860000 r--p 00009000 fd:00 2582022 /lib/libnss_files-2.5.so 00860000-00861000 rw-p 0000a000 fd:00 2582022 /lib/libnss_files-2.5.so 00ac0000-00bea000 r-xp 00000000 fd:00 2582166 /lib/libcrypto.so.0.9.8e 00bea000-00bfe000 rw-p 00129000 fd:00 2582166 /lib/libcrypto.so.0.9.8e 00bfe000-00c01000 rw-p 00bfe000 00:00 0 00e68000-00e69000 r-xp 00e68000 00:00 0 [vdso] 08048000-08074000 r-xp 00000000 fd:00 927261 /usr/sbin/nsd 08074000-08079000 rw-p 0002b000 fd:00 927261 /usr/sbin/nsd 08079000-0808c000 rw-p 08079000 00:00 0 08a20000-08a67000 rw-p 08a20000 00:00 0 b7f8d000-b7ff2000 rw-p b7f8d000 00:00 0 b7ffd000-b7ffe000 rw-p b7ffd000 00:00 0 bfa6d000-bfa91000 rw-p bffda000 00:00 0 [stack] Would /etc/nsd/restart or kill -1 20077 solve the problem?

  Read the article

• Routing and Remote Access Service won't start after full disk

  - by NKCSS

  The HDD of the server was out of disk space, and after a reboot, RRAS won't start anymore on my 2008 R2 server. Error Details: Log Name: System Source: RemoteAccess Date: 2/5/2012 9:39:52 PM Event ID: 20153 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Windows14111.<snip> Description: The currently configured accounting provider failed to load and initialize successfully. The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="RemoteAccess" /> <EventID Qualifiers="0">20153</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-02-05T20:39:52.000Z" /> <EventRecordID>12148869</EventRecordID> <Channel>System</Channel> <Computer>Windows14111.<snip></Computer> <Security /> </System> <EventData> <Data>The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error.</Data> <Binary>2C030000</Binary> </EventData> </Event> I think it has something to do with a corrupt config file, but I am unsure of what to do. I Removed the RRAS role, rebooted, and re-added, but it keeps failing with the same error. Thanks in advance. [UPDATE] If i set the accounting provider from 'Windows' to '' the service starts but VPN won't work. Any ideas how this can be repaired?

  Read the article

• Finding underlying cause of Window 7 Account corruption.

  - by Carl Jokl

  I have been having trouble with my Sister's computer which I built. It is running Windows 7 Ultimate x64. The problem is that I have had problems with the accounts becoming corrupted. First problems manifest themselves in the form of Windows saying the profile failed to be loaded properly and a temporary profile. Eventually the account will not allow login at all. An error message along the lines the authentication service failing the login. I have found information about this problem and how to fix it. The problem being that something has corrupted the account profile and backing up and recreating the accounts fixes the problem. I have been able to fix things and get logins working again but over the period of usually about a week it happens again. Bit by bit the accounts corrupt and then it is back to square one. I am frustrated because I don't know what the underlying cause of the problem is i.e. what is causing the accounts to be corrupted in the first place. At the moment I am just treating the symptoms. I was hoping someone who may have more experience with dealing with this problem might be able to help me find the root cause. Some articles suggest that Norton Internet Security is a big culprit of this problem which is installed. I could try uninstalling Norton and see if it helps. The one thing which is different about this computer to any other I have built is that it has a solid state drive. Actually it has both a hard drive and solid state drive. The documents and settings i.e. the Users directory is stored on the hard drive. This was done following an article about moving the user account data onto a separate drive on Windows 7 which I found on the Internet. Moving the User accounts is more of a pain under Windows 7 and this solution involved creating a low level file system link to the folder from the boot drive (Solid State) to the Hard Drive. The idea is that the computer behaves just as if it is accessing the User's folder from the boot drive but actually the data is stored on the hard drive. This may have nothing to do with the cause of the problem but due to the problem being user account corruption it is a possibility I have not been able to rule out. Any help would be appreciated as I would be glad to see the back of this problem.

  Read the article

• Simple mdadm RAID 1 not activating spare

  - by Nick Liu

  I had created two 2TB HDD partitions (/dev/sdb1 and /dev/sdc1) in a RAID 1 array called /dev/md0 using mdadm on Ubuntu 12.04 LTS Precise Pangolin. The command sudo mdadm --detail /dev/md0 used to indicate both drives as active sync. Then, for testing, I failed /dev/sdb1, removed it, then added it again with the command sudo mdadm /dev/md0 --add /dev/sdb1 watch cat /proc/mdstat showed a progress bar of the array rebuilding, but I wouldn't spend hours watching it, so I assumed that the software knew what it was doing. After the progress bar was no longer showing, cat /proc/mdstat displays: md0 : active raid1 sdb1[2](S) sdc1[1] 1953511288 blocks super 1.2 [2/1] [U_] And sudo mdadm --detail /dev/md0 shows: /dev/md0: Version : 1.2 Creation Time : Sun May 27 11:26:05 2012 Raid Level : raid1 Array Size : 1953511288 (1863.01 GiB 2000.40 GB) Used Dev Size : 1953511288 (1863.01 GiB 2000.40 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Mon May 28 11:16:49 2012 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : Deltique:0 (local to host Deltique) UUID : 49733c26:dd5f67b5:13741fb7:c568bd04 Events : 32365 Number Major Minor RaidDevice State 1 8 33 0 active sync /dev/sdc1 1 0 0 1 removed 2 8 17 - spare /dev/sdb1 I've been told that mdadm automatically replaces removed drives with spares, but /dev/sdb1 isn't being moved into the expected position, RaidDevice 1. UPDATE (30 May 2012): A badblocks destructive read-write test of the entire /dev/sdb yielded no errors as expected; both HDDs are new. As of the latest edit, I assembled the array with this command: sudo mdadm --assemble --force --no-degraded /dev/md0 /dev/sdb1 /dev/sdc1 The output was: mdadm: /dev/md0 has been started with 1 drive (out of 2) and 1 rebuilding. Rebuilding looks like it's progressing normally: md0 : active raid1 sdc1[1] sdb1[2] 1953511288 blocks super 1.2 [2/1] [U_] [>....................] recovery = 0.6% (13261504/1953511288) finish=2299.7min speed=14060K/sec unused devices: <none> I'm now waiting on this rebuild, but I'm expecting /dev/sdb1 to become a spare just like the five or six times that I've tried rebuilding before. UPDATE (31 May 2012): Yeah, it's still a spare. Ugh! UPDATE (01 June 2012): I'm trying Adrian Kelly's suggested command: sudo mdadm --assemble --update=resync /dev/md0 /dev/sdb1 /dev/sdc1 Waiting on the rebuild now... My questions are: Why isn't the spare drive becoming active sync? How can I make the spare drive become active?

  Read the article

• VirtualBox - multiple guests, each with a single bridged adapter?

  - by Martin

  I am running a dedicated server (located at Hetzner, Germany) that runs VirtualBox in order to virtualize several services accross multiple virtual guests. Those guests are supposed to communicate with each other (for instance, a virtual web server has to access a virtual database server); to be reachable from the dedicated server (for instance, SSH access); and to access the Internet via the dedicated server (for instance, to download security updates) Currently, this is achieved by having host-only adapter vboxnet0 on the dedicated server and two virtual interfaces on each guest. There, virtual adapter eth0 is attached to vboxnet0 (to achieve (1) and (2)), virtual adapter eth1 is attached to VirtualBox' NAT (to achieve (3)). Via eth0, the guests have access to a DHCP and a DNS server, both running on the dedicated server (there, bound to vboxnet0). This allows me to assign custom IP addresses and names. Via eth1, VirtualBox pushes a proper route that enables each guest to access the Internet (via eth0 on the dedicated server). This setup with two virtual adapters frequently leads to problems and at leasts complicates many things. For instance, on the dedicated server there is OpenVPN which allows to access the virtual machines via the Internet; futhermore, there is Shorwall that controls the incoming and outgoing network traffic between the Internet, the dedicated server, and the individual virtual machines. Not to mention automatic installation of servers via PXE... Therefore, I would prefer to have only one single virtual adapter on each guest which would be used for both incoming and outgoing connections. As far as I understand, one would basically use a bridged interface for that very purpose. Now the question arises: Which interface on the dedicated server would the bridge use? eth0 on the host server is not an option, as this is prohibited by the provider. A virtual interface eth0:0 would not make any sense, as a bridge always uses a physical interface (eth0 in this case). Would it be possible to create a bridged interface in each virtual machine that would "dangle in the air"? Thus, without a complement on the dedicated server? How would I have to set up the routing on the host server? Please note that the host / dedicated server has only one network adapter (eth0) which is connected to the provider's network. Regards, Martin

  Read the article

• Multicast hostname lookups on OSX

  - by KARASZI István

  I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you! Update #1 Thanks @mralexgray for the scutil --dns command, now I can see my domain in the list, but it's late in the order: DNS configuration resolver #1 domain : adverticum.lan nameserver[0] : 192.168.1.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 resolver #3 domain : 254.169.in-addr.arpa options : mdns timeout : 2 order : 300200 resolver #4 domain : 8.e.f.ip6.arpa options : mdns timeout : 2 order : 300400 resolver #5 domain : 9.e.f.ip6.arpa options : mdns timeout : 2 order : 300600 resolver #6 domain : a.e.f.ip6.arpa options : mdns timeout : 2 order : 300800 resolver #7 domain : b.e.f.ip6.arpa options : mdns timeout : 2 order : 301000 resolver #8 domain : domain.local nameserver[0] : 192.168.1.1 order : 200001 Maybe it would work if I could move the resolver #8 to the position #2. Update #2 No probably won't work because the local DNS server on 192.168.1.1 answering for domain.local requests and it's before the mDNS (resolver #2). Update #3 I could decrease the mDNS timeout in /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist file, which speeds up the lookups a little, but this is not the solution.

  Read the article

• SSH to an ubuntu machine using avahi

  - by tensaiji

  I have an ubuntu box that I connect to using avahi. Connecting to that box works fine for all services (I regularly use AFP, SSH and SMB on it) but I've noticed that whenever I connect to it from a mac using SSH (and using the ".local" dns name provided by avahi - eg. "ssh .local") SSH tries to connect using ipv6, which for some reason times out (after two minutes) then it tries ipv4 which connects immediately. I'd like to avoid this timeout, as it's really annoying for me and other users - if SSH tried ipv4 first or if ssh over ipv6 worked then that would solve the problem. But so far I've been unable to get either to work (the best I've managed is to specify the "-4" option to SSH to stop it from trying ipv6 at all). I'm using Ubuntu 10.04. Any solution has to be on the server (not the client) as there are multiple clients connecting. A possible complication might be that my LAN is set up to allow link-local ipv6 addresses only, but I have other servers (using Mac OS) that I can SSH into using ipv6) I suspect that the problem could be solved by either preventing avahi from broadcasting the ipv6 address, or by enabling ssh over ipv6, but so far as I can tell avahi is already configured not to broadcast the ipv6 address and sshd is configured to allow ipv6 connections! Here's my /etc/avahi/avahi-daemon.conf (I don't think I've changed anything from the ubuntu defaults) [server] #host-name=foo #domain-name=local #browse-domains=0pointer.de, zeroconf.org use-ipv4=yes use-ipv6=no #allow-interfaces=eth0 #deny-interfaces=eth1 #check-response-ttl=no #use-iff-running=no #enable-dbus=yes #disallow-other-stacks=no #allow-point-to-point=no [wide-area] enable-wide-area=yes [publish] #disable-publishing=no #disable-user-service-publishing=no #add-service-cookie=no #publish-addresses=yes #publish-hinfo=yes #publish-workstation=yes #publish-domain=yes #publish-dns-servers=192.168.50.1, 192.168.50.2 #publish-resolv-conf-dns-servers=yes #publish-aaaa-on-ipv4=yes #publish-a-on-ipv6=no [reflector] #enable-reflector=no #reflect-ipv=no [rlimits] #rlimit-as= rlimit-core=0 rlimit-data=4194304 rlimit-fsize=0 rlimit-nofile=300 rlimit-stack=4194304 rlimit-nproc=3 and here's my sshd_config (mainly updated to only allow pub/private keys): # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 180 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication no AllowGroups sshusers # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes Does anyone have any ideas that I can try, or has experienced anything similar?

  Read the article

• Pxe net install Centos with Static IP

  - by Stu2000

  I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

  Read the article

• Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

  - by Tiby

  I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

  Read the article

• batch file infinite loop when parsing file

  - by Bart

  Okay, this should be a really simple task but its proving to be more complicated than I think it should be. I'm clearly doing something wrong, and would like someone else's input. What I would like to do is parse through a file containing paths to directories and set permissions on those directories. An example line of the input file. There are several lines, all formatted the same way, with a different path to a directory. E:\stuff\Things\something else (X)\ (The file in question is generated under Cygwin using find to list all directories with "(X)" in the name. The file is then passed through unix2win to make it windows compatible. I've also tried manually creating the input file from within windows to rule out the file's creation method as the problem.) Here's where I'm stuck... I wrote the following quick and dirty batch file in Windows XP and it worked without any issues at all, but it will not work in server 2k8. Batch file code to run through the file and set permissions: FOR /F "tokens=*" %%A IN (dirlist.txt) DO echo y| cacls "%%A" /T /C /G "Domain Admins":f "Some Group":f "some-security-group":f What this is SUPPOSED to do (and does in XP) is loop through the specified file (dirlist.txt) and run cacls.exe on each directory it pulls from the file. The "echo y|" is in there to automagically confirm when cacls helpfully asks "are you sure?" for every directory in the list. Unfortunately, however, what it DOES is fall into an infinite loop. I've tried surrounding everything after "DO" with quotes, which prevents the endless loop but confuses cacls so it throws an error. Interestingly, I've tried running the code from after "DO" manually (obviously replacing the variable with the full path, copied straight from the file) at a command prompt and it runs as expected. I don't think it's the file or the loop, as adding quotes to the command to be executed prevents the loop from continuing past where it's supposed to... I really have no idea at this point. Any help would be appreciated. I have a feeling it's going to be something increadibly stupid... but I'm pulling my hair out so I thought I'd ask.

  Read the article

• Hybrid gmail MX + postfix for local accounts

  - by krunk

  Here's the setup: We have a domain, mydomain.com. Everything is on our own server, except general email accounts which are through gmail. Currently gmail is set as the MX record. The server also has various email aliases it needs to support for bug trackers and such. e.g. [email protected] |/path/to/issuetracker.script I'm struggling with a setup that allows the following, both locally and from user's email clients. guser1 - has a gmail account and a local account guser2 - only has a gmail account bugs - has a pipe alias in /etc/aliases for issue tracker Scenarios mail to [email protected] from local host (crons and such) needs to go to gmail account mail to [email protected] from local host mail to [email protected] needs to be piped to the local issue tracker script So, the first stab was creating a transport map. In this scenario, the our server would be set as teh MX and guser* destined emails are sent to gmail. Put the gmail users in a map like so: [email protected] smtp:gmailsmtp:25 [email protected] smtp:gmailsmtp:25 Problems: Ignores extensions such as [email protected] Only works if append_at_myorigin = no (if set to yes, gmail refuses to connect with: E4C7E3E09BA3: to=, relay=none, delay=0.05, delays=0.02/0.01/0.02/0, dsn=4.4.1, status=deferred (connect to gmail-smtp-in.l.google.com[209.85.222.57]:25: Connection refused)) since append_at_myorigin is set to no, all received emails have (unknown sender) The second stab was to set explicit localhost aliases in /etc/aliases and do a domain wide forward on mydomain. This too requires setting the local server as the MX: root: root@localhost # transport mydomain.com smtp:gmailsmtp:25 Problems: * If I create a transport map for a domain that matches "$myhostname", the aliases file is never parsed. So when a local user (or daemon) sends an email like: mail -s "testing" root < text.txt Postfix ignores the /etc/alias entry and maps to [email protected] and attempts to send it to the gmail transport mapping. Third stab: Create a subdomain for the bugs, something like bugs.mydomain.com. Set the MX for this domain to local server and leave the MX for mydomain.com to the Gmail server. Problems: * Does not solve the issue with local accounts. So when the bug tracker responds to an email from [email protected], it uses a local transport and the user never receives the email. % postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_at_myorigin = no append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = $myhostname, localhost.$myhostname, localhost myhostname = mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_cert_file = /etc/ssl/certs/kspace.pem smtp_tls_enforce_peername = no smtp_tls_key_file = /etc/ssl/certs/kspace.pem smtp_tls_note_starttls_offer = yes smtp_tls_scert_verifydepth = 5 smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_destination smtpd_tls_ask_ccert = yes smtpd_tls_req_ccert = no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport

  Read the article

• http://localhost/ always gives 502 unknown host

  - by Nitesh Panchal

  My service for World Wide Web Publishing Service started successfully but whenever I browse to http://localhost/ I always get 502 Unknown host. Also, wampapache is installed side by side but when I stop IIS service and start wampapache from services.msc I get error and when I view it in System event log I get this error: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7024</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2011-06-12T17:43:28.223498400Z" /> <EventRecordID>346799</EventRecordID> <Correlation /> <Execution ProcessID="456" ThreadID="3936" /> <Channel>System</Channel> <Computer>MACHINENAME</Computer> <Security /> </System> - <EventData> <Data Name="param1">wampapache</Data> <Data Name="param2">%%1</Data> </EventData> </Event> I am fed up of this error and it is driving me nuts. I feel like banging my head against the laptop. I am really serious. Without concentrating on my real application I am trying to solve this issue since 3 hours. I google various threads and few of them said that there could be issue of Reporting Services or Skype. But I have uninstalled Skype and Reporting Services are disabled. What more should I do? I have hosts file present in etc directory and it does have mapping for localhost to 127.0.0.1. What more could I do?

  Read the article

• Can't connect to svnserve on localhost - connection actively refused

  - by RMorrisey

  When I try to connect using Tortoise to my SVN server using: svn://localhost/ Tortoise tells me: "Can't connect to host 'localhost'. No connection could be made because the target machine actively refused it." How can I fix this? I am trying to set up a subversion server on my local PC for personal use. I am running Windows Vista, with SlikSVN and TortoiseSVN installed. I previously had everything working correctly, but I found that I couldn't merge(!), apparently due to a version mismatch between the SVN client and server. Anyway... I now have the following setup: I created a repository using svnadmin create; it resides at C:\svnGrove C:\svnGrove\conf\svnserve.conf (# comments omitted): [general] anon-access=read auth-access=write password-db=passwd #authz-db=authz realm=svnGrove C:\svnGrove\conf\passwd: [users] myname=mypass My Subversion Server service is pointed to: C:\Program Files\SlikSvn\bin\svnserve.exe --service -r C:\svnGrove It shows the TCP/IP service as a dependency. I have also tried running svnserve from the command line, with similar results. The below is provided by the 'about' option in TortoiseSVN: TortoiseSVN 1.6.10, Build 19898 - 32 Bit , 2010/07/16 15:46:08 Subversion 1.6.12, apr 1.3.8 apr-utils 1.3.9 neon 0.29.3 OpenSSL 0.9.8o 01 Jun 2010 zlib 1.2.3 The following is from svn --version on the command line (not sure why it says CollabNet, CollabNet was the previous SVN binary that I had set up. The uninstaller failed to remove everything gracefully): svn, version 1.6.12 (SlikSvn/1.6.12) WIN32 compiled Jun 22 2010, 20:45:29 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: * ra_neon : Module for accessing a repository via WebDAV protocol using Neon. - handles 'http' scheme - handles 'https' scheme * ra_svn : Module for accessing a repository using the svn network protocol. - with Cyrus SASL authentication - handles 'svn' scheme * ra_local : Module for accessing a repository on local disk. - handles 'file' scheme * ra_serf : Module for accessing a repository via WebDAV protocol using serf. - handles 'http' scheme - handles 'https' scheme I disabled my Windows Firewall and CA Internet Security, without success in resolving the issue. Edit The old version of svnserve was still set up as a service after the uninstall, pointed to this path: C:\Program Files\Subversion\svn-win32-1.4.6\bin I edited the registry key for the service to point to the new path (shown above). Whether I run svnserve as a service, or using -d, I do not see an entry for that port number in the listing generated by netstat -anp tcp.

  Read the article

• apache sendmail: trying to change user "from" address from apache to domain account

  - by Wes

  I apologize if I am asking a question already answered, but my problem isn't really that I haven't found an answer. I have, in fact, found a half-dozen different "solutions" to my problem, tried them all, in various combinations, and have been consistently unsuccessful. The goal All I want to do is change the envelope "from" address for all email sent from [email protected] to [email protected], always. What I've already done I am running Apache, PHP, and sendmail on CentOS 5.5, [email protected]. We have an SMTP server at 192.168.0.4. The domain's email accounts are all at @domain.org. I have successfully set up "smart host" using this line in the sendmail.mc file: define(`SMART_HOST', `192.168.0.4')dnl Then I set up masquerading, and was hopeful this would solve it. I have this in the .mc file: FEATURE(`masquerade_entire_domain')dnl FEATURE(`masquerade_envelope')dnl FEATURE(`allmasquerade')dnl MASQUERADE_AS(`domain.org')dnl MASQUERADE_DOMAIN(`domain.org.')dnl MASQUERADE_DOMAIN(`localhost.localdomain.')dnl This rewrites "to" addresses, but not "from" addresses. Testing from the command line: sendmail -v [email protected] Always is shown from the local user (in this case root, or my local user account). I had read that "sendmail" command sometimes bypasses masquerading. Nevertheless, using the "mail" command has the same result. After that, I have explored several "solutions", including: mailertable virtusertable FEATURE(`accept_unresolvable_domains')dnl LOCAL_DOMAIN(`localhost.localdomain')dnl FEATURE(`genericstable')dnl /etc/mail/access file /etc/mail/local-host-names file /etc/mail/trusted-users file All to no affect. The last thing I've tried So, I decided to go in a different direction, and try to set the envelope "from" address via PHP, using either the configuration in /etc/php.ini, or adding the -f parameter to the mail() function or to sendmail command. If I run this command: sendmail -v -f [email protected] [email protected] I get this error in /var/log/maillog: Mar 30 08:56:16 localhost sendmail[24022]: p2UCuE8w024022: [email protected], size=5, class=0, nrcpts=1, msgid=<[email protected]>, relay=user@localhost Mar 30 08:56:19 localhost sendmail[24022]: p2UCuE8w024022: [email protected], [email protected] (500/502), delay=00:00:05, xdelay=00:00:03, mailer=relay, pri=30005, relay=[192.168.0.4] [192.168.0.4], dsn=5.1.1, stat=User unknown Mar 30 08:56:19 localhost sendmail[24022]: p2UCuE8w024022: p2UCuE8x024022: DSN: User unknown Mar 30 08:56:23 localhost sendmail[24022]: p2UCuE8x024022: [email protected], delay=00:00:04, xdelay=00:00:04, mailer=relay, pri=31029, relay=[192.168.0.4] [192.168.0.4], dsn=2.0.0, stat=Sent (Ok: queued as B5E2E40E0A2) Which is basically a "User unknown" 550 error. Help Please help. What do I need to change? Should I just start over in the sendmail.mc file? It has a ton of config options stuffed in it, over days of trying things. Why is changing the envelope "from" address via the command line generating a "User unknown" error?

  Read the article

< Previous Page | 804 805 806 807 808 809 810 811 812 813 814 815  | Next Page >