Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 82/315 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

  • Access virtualhosts over LAN (Also in xpmode (Virtual PC))

    - by Pheter
    Hi, I am running Wamp on my computer (the host). I have set up several virtualhosts in apache and they are working fine when I access them from the same computer (host). I have installed Windows XPMode on my computer (which is running windows 7). XPMode (which uses Virtual PC) is set up to use a NAT network. The network in XPMode is working fine, and I can access the host PC via the IP address 192.168.1.5, just as I would if I was using any physical computer on the same network. I can view all the web pages at 192.168.1.5 and it's subdirectories. However, I cannot access any of the subdomains that are configured in the virtualhosts of the host computer. How can I access the subdomains? I don't think that the fact that I am using XPMode and am using a virtualized OS has anything to do with it, but I thought that it was worth mentioning.

    Read the article

  • dynamic routing between openvpn tunnels

    - by pQd
    i'm thinking about using dynamic routing [ OSPF or RIP ] via OpenVPN tunnels. right now i have few offices connected in full mesh, but this is not scalable solution as we add more locations. i would like to avoid situation when plenty of internal traffic is affected if one of two vpn termination points that i plan to use is down. do you have similar configuration working in production? if so - what routing daemon did you use - quagga? something else? did you encounter any problems? thanks!

    Read the article

  • Connection speed drops from 1 Gbps to 10 Mbps (Vista 64)

    - by Kevin Hakanson
    I recently got a Windows Home Server (HP MediaSmart Server EX490) setup so I could do backups and other things. However, I am having trouble on my Vista 64 PC. The backup will be making great progress, then it will just slow down. At one point, I noticed the lights on my Netgear GS105 indicated it was not using a 1000 Mbps connection, but a 10 Mbps one. I checked the Status of Local Area Connection (Intel(R) 82567V-2 Gigabit Network Connection) and that also showed the same slow speed. This has happened several times in the last couple days. When I disabled the network device, and then enabled it, it established the 1 Gpbs connection again. However, some of the times the Sent Bytes Activity on the Status windows indicate that the data flow is still slow (100 to 1000 bytes every couple seconds). Obviously, at this rate I could backup faster to floppy disk. :) My question is how to diagnose and fix this problem. When I look at the Administrative Events, I do a Errors: Bonjour Service 456: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.) And a Warning: e1yexpress Intel(R) 82567V-2 Gigabit Network Connection Link has been disconnected. I am suspicious there is some power saving mode. I found a post suggesting System Idle Power Saver(SIPS) may be the issue. I am going to try that, but looking for other suggestions or diagnostic advice. I have several new items in this configuration: server, client software, switch and cat6 cables.

    Read the article

  • logging into network share

    - by Jake Rue
    Hi, I am logging into a network share through a batch script to start a test I can get the shared program logged in but then up comes the windows prompt "run" or "cancel". Not all of the machines have this prompt. How can I automatically choose 'run' from this prompt so the rest of the script can run? Jake

    Read the article

  • ServerFault Wiki: How does Subnetting Work?

    - by Kyle Brandt
    How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Serverfault gets lots of subnetting homework questions, so we could use an answer to point them to on serverfault itself. If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if serverfault had a generic subnetting answer.

    Read the article

  • Can I subnet a subnet?

    - by Portman
    Apologies in advance for the botched terminology. I have read the Server Fault Subnet Wiki but this is more of an ISP question. I currently have a /27 block of public IPs. I use give my router the first address in this pool and then use 1-to-1 NAT for all the servers behind the firewall, so that they each get their own public IP. The router/firewall is currently using (actual addresses removed to protect the guilty): IP Address: XXX.XXX.XXX.164 Subnet mask: 255.255.255.224 Gateway: XXX.XXX.XXX.161 What I would like to do is break out my subnet into two separate /28 subnets. And do this in a way that is transparent to the ISP (i.e., they see me as continuing to operate a single /27). Currently, my topology looks like: ISP | [Router/Firewall] | [Managed Ethernet Switch] / \ \ [Server1] [Server2] [Server3] (etc) Instead, I would like it to look like: ISP | [Switch] / \ [Router1] [Router2] | | | | [S1] [S2] [S3] [S4] (etc) As you can see, this would partition me into two separate networks. I'm struggling with what the correct IP settings would be on Router1 and Router2. Here's what I have right now: Router1 Router2 IP Address: XXX.XXX.XXX.164 XXX.XXX.XXX.180 Subnet mask: 255.255.255.240 255.255.255.240 Gateway: XXX.XXX.XXX.161 XXX.XXX.XXX.161 Note that normally you would expect Router2 to have a gateway of .177, but I'm trying to get them both to use the gateway originally given to me by the ISP. Is subnetting like this in fact possible, or am I completely botching the most basic concepts?

    Read the article

  • Norton Ghost EBAB03F1: The specified network name is no longer available.

    - by Breck Carter
    After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

    Read the article

  • configuring two network interfaces in ubuntu 10.04.1

    - by Bill Smith
    I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

    Read the article

  • eth0:0 is configured but not listed in ifconfig output

    - by FractalizeR
    Hello. I have the following problem: My server was given two IPs from [b]different[/b] subnets. Now I am trying to configure the system to work properly. I have created [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.69.241 NETMASK=255.255.254.0 NETWORK=79.174.68.0 ONBOOT=yes GATEWAY=79.174.68.1 TYPE=Ethernet [root@server ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0:0 # Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) HWADDR=00:30:48:DA:B1:0E DEVICE=eth0 BOOTPROTO=none BROADCAST=79.174.69.255 IPADDR=79.174.71.74 NETMASK=255.255.255.0 NETWORK=79.174.71.1 ONBOOT=yes GATEWAY=79.174.71.1 TYPE=Ethernet But both after "service network restart" and after "reboot" [root@server ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E inet addr:79.174.71.74 Bcast:79.174.71.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:feda:b10e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:910284 errors:0 dropped:0 overruns:0 frame:0 TX packets:2924 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:257964879 (246.0 MiB) TX bytes:232450 (227.0 KiB) Memory:df220000-df240000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:27 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6976 (6.8 KiB) TX bytes:6976 (6.8 KiB) Device eth0:0 is not shown as active. If I try [root@server ~]# ifconfig eth0:0 eth0:0 Link encap:Ethernet HWaddr 00:30:48:DA:B1:0E UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:df220000-df240000 It is shown as up and running, but IP is not assigned to it. Also it is strange, that IP address assigned to eth0:0 in config file is used by eth0. /var/log/messages shows nothing about network configuration errors on either eth0 or eth0:0. system-config-network seem to understand all settings correctly and resaves them ok also. "ifup eth0:0" executes ok, but ifconfig afterwards shows no eth0:0 device after that. What did I do wrong? May be the problem is that IPs are from different subnets?

    Read the article

  • How to get rid of auto-generated sequence number in network's device name in Windows?

    - by Piotr Dobrogost
    Every time one plugs in the same usb wireless adapter in a new usb port, Windows creates new network device with auto-generated sequence number which looks like this Wireless-N USB Network Adapter #2, Wireless-N USB Network Adapter #3, ... The name of a device is being displayed as part of network's information in Control Panel|Network Connections. How can I get rid of this sequence number? I found out device name which is displayed in network's information is kept in the FriendlyName REG_SZ value under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_[device specific string]\[usb port specific string] However when I try to modify this value I get error Cannot edit FriendlyName: Error writing the value's new contents. I tried to delete extra keys under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_13B1&PID_0029 but got Cannot delete KEY NAME: Error while deleting key. error. Trying to solve this problem I followed this answer but trying to change owner with Replace owner on subcontainers and objects option checked I got this error - Registry Editor could not set owner on the currently selected, or some of its subkeys. To find out which subkey is the source of problem I tried changing owner of each subkey. After successfully changing owner of Properites subkey I saw it has subkeys which were previously hidden. Now trying to change owner of these subkeys looks like this: Any idea how to delete these keys?

    Read the article

  • Ethernet switch capacity question

    - by Andrew Queisser
    We're looking at hooking up 48 small embedded systems with 10/100 Ethernet ports to an Ethernet switch and then have that switch talk to a server upstream via a faster connection. I have a couple of questions about that scenario: What kind of upstream connection is best (fiber, other?) Would it be reasonable to download 1GB/hour from each of the 48 systems concurrently? We'd be using some kind of TCP based protocol of our own design. Thanks, Andrew

    Read the article

  • 5.5.0 smtp;554 transaction failed spam message not queued

    - by Miguel
    Some users are trying to send email to certain domains using Exchange Server 2003, but the message is always is rejected and the following message is shown: 5.5.0 smtp;554 Transaction Failed Spam Message not queued The IP is not in a black list (checked using http://whatismyipaddress.com/blacklist-check and is clean - not listed). The emails were checked using using smtpdiag ("a troubleshooting tool designed to work directly on a Windows server with IIS/SMTP service enabled or with Exchange Server installed") and the connection using port 25 is ok. Also, an nslookup with set type=ptr shows (names and IP changed, "" means I typed something): C:\Documents and Settings\administrator>nslookup Default Server: publicdns.isp.net Address: 10.10.10.10 > server publicdns.isp.net Default Server: publicdns.isp.net Address: 10.10.10.10 > set type=ptr >mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com primary name server = publicdns.isp.net responsible mail addr = root.isp.net serial = 2011061301 refresh = 10800 (3 hours) retry = 3600 (1 hour) expire = 604800 (7 days) default TTL = 86400 (1 day) > 20.21.22.23 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 Server: publicdns.isp.net Address: 10.10.10.10 23.22.21.20.in-addr.arpa name = mail.mydomain.com 20.21.in-addr.arpa nameserver = publicdns.isp.net 20.21.in-addr.arpa nameserver = publicdns2.isp.net publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=mx > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 mydomain.com MX preference = 10, mail exchanger = mail.mydomain.com mydomain.com nameserver = publicdns.isp.net mydomain.com nameserver = publicdns2.isp.net mail.mydomain.com internet address = 20.21.22.23 publicdns2.isp.net internet address = 10.10.10.11 publicdns.isp.net internet address = 10.10.10.10 > set type=a > mydomain.com Server: publicdns.isp.net Address: 10.10.10.10 Nombre: mydomain.com Address: 20.21.22.23 When I test the spf record with http://www.mxtoolbox.com it shows: TXT mydomain.com 24 hrs v=spf1 a mx ptr ip4:20.21.22.23 mx:mail.mydomain.com -all Any clues of what's happening here?

    Read the article

  • OpenVPN Bridge LAN-to-LAN Configuration?

    - by Shad Reese
    I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

    Read the article

  • Anti-DDoS Question

    - by Andre
    Our company´s main owner (telecon group) wants us to deploy anti-DDoS mechanisms, such as Arbor Pravail, which is a great idea. Although... I have a question... If our main ISP Backbone provider have no anti-DDoS mechanism, means that there is no point we get the Arbor Pravail? An DDoS attack can make damage uniquely the destination IP or to the whole network that the DDoS packets go through? Regards,

    Read the article

  • Access All VLANS over XenServer Interface

    - by Garrett
    For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access both tagged and untagged traffic in order to route traffic. Here's the problem: 1) If I bind the NIC in XenCenter to the VM (which has no VLAN ID associated with it), the VM cannot see any tagged traffic. I have verified this using tcpdump. However, the tagged traffic is flowing into the XenServer machine perfectly fine. 2) I have more than 7 VLANs, so adding each VLAN as an interface within XenCenter isn't an option. 3) Even though tcpdump shows no tagged traffic coming in the VMs NIC, I have tried adding VLAN interfaces within Vyatta. This also doesn't work. I have tried using both Linux bridge and openvswitch setups and neither seem to work. I am running XenServer 6.0.3 free and Vyatta VC6.3. Please help! I've run out of ideas. I've googled for hours and can't seem to find anything.

    Read the article

  • Keep getting invalid IP via WiFi

    - by nmuntz
    There is something wrong with my WiFi. I keep getting an invalid IP via DHCP (169.254.x.x), this happens for ALL wifi connections (home, office, etc). If I try a Local Ethernet connection via cable it works fine. I have tried downloading the latest drivers for my wireless adapter, resetting the TCP Stack and still have this issue. One strange thing I notice is under Device Manager, Network Adapters I have 4 "Unknown Devices" and three "Remote NDIS based Internet Sharing Device". My guess is that this belongs to McAfee. Not sure if this is related or not, anyways to try to fix this I tried downloading the NetLUIDfix.exe utility from McAfee but it didn't work. Any ideas how to solve this annoying issue? Thanks!!

    Read the article

  • IBM HS23 Blade Server (7875) onboard NIC driver for linux

    - by Igor Spivak
    I work with IBM HS23 Blade Server (7875). It's onboard NIC adapter is: Emulex OCl11104-F-X Virtual Fabric Adapter 2-port 10GB and 2-port 1GB LOM . I'm tryed to the following Linux OS with the server: 2.6.32-22-generic-pae #36-Ubuntu SMP. and discovered my OS has not proper Network drive installed (for the NIC adapter described above). After investigation I made, I discovered that the driver I need is "be2net" placed in "net" directory of the linux under the folder "be2net". I managed to download this driver with the latest package for my kernel. Driver info ("modinfo be2net" result) is as follows: --------------------------------------------------------------------------------------- filename: /lib/modules/2.6.32-22-generic-pae/kernel/drivers/net/benet/be2net.ko license: GPL author: ServerEngines Corporation description: ServerEngines BladeEngine2 10Gbps NICDriver 2.101.205 version: 2.101.205 srcversion: 199ADD251CB874C3727CC47 alias: pci:v000019A2d00000710sv*sd*bc*sc*i* alias: pci:v000019A2d00000701sv*sd*bc*sc*i* alias: pci:v000019A2d00000700sv*sd*bc*sc*i* alias: pci:v000019A2d00000221sv*sd*bc*sc*i* alias: pci:v000019A2d00000211sv*sd*bc*sc*i* depends: vermagic: 2.6.32-22-generic-pae SMP mod_unload modversions 586TSC parm: rx_frag_size:Size of a fragment that holds rcvd data. (uint) --------------------------------------------------------------------------------------- After starting linux, I get the following error: be2net 0000:16:00.x: Emulex OneConnect 10Gbps NIC (be3) initilization failed. I checked the same server with another Linux version (Red-Had 5.5.1.0) and the NICs worked properly, so seems there is no problem in HW. Also, on IBM or Emulex offical sites I managed to find drivers only for Red-Had and SUSE versions.

    Read the article

  • Exchange 2003: Fresh install, couple noob questions.

    - by Eli
    Hi All, Thanks for reading! I have a small network set up for a local office here, and have a fresh install of Exchange 2003 on our sole-server PDC. The network uses one domain, call it ourdomain.net, which is DNSed locally, but not DNSed for the actual domain, so ourdomain.net works from within the network, but from outside, it's just pointed to some domain parking. I have a completely different domain, call it emaildomain.com, which is currently setup for our website and email, which is hosted with a standard hosting company. We've been using a combination of Thunderbird and Outlook (with local .pst files) for email. I've been asked to setup Exchange to work with our email, but am not familiar with it. The install seems to have gone just fine. The question is: How do I get email from a domain outside our network to work with the exchange server? Do I need to move the email for that domain to point to our local server (I so hope not!), or can I just set exchange so somehow slurp mail from the existing mailboxes on our host for that domain's mail? Or are there better ideas I don't know to ask for? Any help very appreciated - thanks!

    Read the article

  • Disable STP in Opensolaris bridge

    - by quentin
    Hello, how can i completely disable STP in a Opensolaris bridge. This bridge is connected to a Cisco Access Port and will disable the uplink port when the first BPDU arrives. bridged[3651]: [ID 581644 daemon.warning] unexpected BPDU on rge1 from 0:xx:xx:xx:xx:b; forwarding disabled I already disabled the transmission of BPDU Messages to the Switch by: dladm set-linkprop -p stp=0 rge1 This solved only the problem that the access switch port goes in "error-disable" mode. Thomas

    Read the article

  • Wire VMWare Player NIC to a VLAN in Ubuntu 8.04.3

    - by Sophie Charlesworth
    I've got VMWare Player 2.5.x installed on a Ubuntu 8.04.3 host running CentOS 5.3 running Cobbler. VMWare Player has two NICs (I actually took this image from an ESXi image, converted it to Player 2.x image via VMWare Standalone Converter). I've also setup a vlan (vlan5) on the host with 10.0.0.x and I'd like Cobbler to use that VLAN to serve any incoming requests. How do I wire up my VMWare to use the VLAN I've setup? Just one of the NICs. What I'm trying to do is to offer a laptop with a VM that our sysadmins can go, plug it into a box (which does not connect to the interwebs) and install RHEL images via cobbler. So essentially, its a cross over cable from the network port on the lappy to the Dell server box. PXE boot in the dell box and install RHEL. I have the cobbler working fine under VMWare ESXi but not so on the VMWare Player because of the VLAN issue - I think. Any ideas?

    Read the article

  • Move sendmail from Fedora 1 to a different server ( fedora 12)

    - by tanieboy4u
    We have a sendmail server that also works as DHCP, DNS, and a gateway to our ISP. It has three network interfaces, one for our ISP ( static IP) and the other two is for LANS on different subnet. The hardware is quite old and we've been experiencing downtime due to hardware failures, so we have decided to upgrade the hardware and while at it upgrade the linux OS to Fedora 12. Were trying to do this with minimal downtime. We are planning to take these steps. Install New OS (Fedora 12) on the new server with 3 network interfaces. Install DHCP, BIND, Sendmail, SpamAssassin, MailScanner, Dovecot, Squirrelmail on the new server. Transfer settings from the old server to the new server. ( This is the hardest part that we know). For DHCP and DNS, we can just copy the dhcp leases and conf file and everything should work right? How do we go about moving the users/email accounts from the old server to the new one? Thanks for all your help!

    Read the article

  • Linux DNS Multi tenant

    - by spicyramen
    I need to setup a multi-tenant DNS solution in Linux DNS Server. Currently I serve multiple companies: Company ABC, Company XYZ, etc... I need to create a) Forwarder zone b) Reverse Forward Zone. I can easily create a Forward Zone with domain abc.com The challenge I have is that each of my customer components share the same IP address. Hence If I create the Reverse Forward Zone I end up with something like this: abc.com 1.1.1.1 host.abc.com xyz.com 1.1.1.1 host.xyz.com If I perform a reverse lookup on host.abc.com it works fine...but if I do a reverse lookup on 1.1.1.1 I get a load balance response of: attempt: host.abc.com attempt: host.xyz.com attempt: host.abc.com Any ideas? I want to add logic to the DNS configuration to handle DNS reverse lookup based on source machine and respond with right hostname. Workaround: Create multiple DNS but this is not scalable.

    Read the article

  • Problems linking to social networks in Windows 8

    - by Andrew Cooper
    I've upgraded my laptop to Windows 8 (from Windows 7) and I'm having problems with getting information to show in the People and Messaging apps. I've linked my Facebook, Twitter and LinkedIn accounts to my Live Id, and on Windows 7 I was able to see my Friends' facebook activity in Windows Live Messenger. In the Windows 8 People app I can see all my contacts from Facebook, Twitter and LinkedIn, and I can see the on-line status of at least my Facebook contacts. I can also see the profiles details of each contact, but I don't get anything in the "What's New" view. The Messaging app is just blank. I assume I should be able to send messages to my contacts, but I can't see any way to do it. Am I missing something?

    Read the article

  • Intel Wireless 4965AGN not achieving N throughput when connected to an Airport Express N network

    - by BenA
    I have an Intel Wireless WiFi Link 4965AGN adaptor in my laptop (HP Pavillion dv2000 series) which is connecting to a 5Ghz-only 802.11n network provided by an Apple Airport Express. The network is using WPA2 encryption. My desktop is also connected the Airport, via a Linksys WUSB600N USB adaptor. Both are running with the latest drivers, and the Airport is running the latest firmware. The Airport is also configured to use wide channels. The problem I have is that I never get throughput above 4MB/s when transferring files between the two machines. Even a pessimistic calculation shows a 270Mbps network as being capable of transfer rates at well above 10MB/s. I'm pretty sure I've isolated the issue to being the Intel adaptor, as wiring the desktop to the AP, and using the Linksys adaptor on the laptop immediately yielded speeds limited by the 100MB/s ethernet connection. I know that 802.11n is still a draft standard, and so mixing kit from different manufacturers can easily lead to poor results, but I was just wondering if anybody else out there has had success with this Intel adaptor on an N network? Or even better, connecting it to an Airport Express? Can anybody give me any advice on how to troubleshoot this issue? I should also mention that the Airport Express doesn't allow you to manually specify channels when running in N mode, and that I've been able to rule out interference from other Wireless LANs by scanning. There aren't any other 5GHz networks in my area. All ideas welcome! Update: A while later, I've just updated to the most recent drivers for both the Intel chip in the laptop, and the USB adaptor. Unfortunately this hasn't improved things :(. If anybody has any advice it would be be gratefully received.

    Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >