Search Results

Search found 20946 results on 838 pages for 'at command'.

Page 833/838 | < Previous Page | 829 830 831 832 833 834 835 836 837 838  | Next Page >

  • Help analyzing traceroute

    - by Abdulla
    Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection. My company has a DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My Internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

    Read the article

  • PostgreSQL 8.4 won't start after blackout

    - by RiZe
    I have problem with starting PostgreSQL 8.4 on Ubuntu 9.10 Server after blackout. When I try to connect to the database it says: psql: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request. When I try to start it by using command sudo -u postgres /etc/init.d/postgresql-8.4 start * Starting PostgreSQL 8.4 database server [ OK ] Netstat output netstat -tulp (No info could be read for "-p": geteuid()=1000 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 localhost:postgresql *:* LISTEN - tcp 0 0 192.168.1.35:svn *:* LISTEN - tcp 0 0 192.168.1.35:http-alt *:* LISTEN - tcp 0 0 *:ssh *:* LISTEN - tcp6 0 0 localhost:postgresql [::]:* LISTEN - tcp6 0 0 [::]:ssh [::]:* LISTEN - udp 0 0 *:bootpc *:* - But still don't work so lets restart it sudo -u postgres /etc/init.d/postgresql-8.4 restart * Restarting PostgreSQL 8.4 database server * The PostgreSQL server failed to start. Please check the log output: 2009-11-30 13:39:37 CET LOG: database system was shut down at 2009-11-30 13:39:33 CET 2009-11-30 13:39:37 CET LOG: autovacuum launcher started 2009-11-30 13:39:37 CET LOG: database system is ready to accept connections 2009-11-30 13:39:37 CET LOG: incomplete startup packet 2009-11-30 13:39:38 CET LOG: server process (PID 2240) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:38 CET LOG: terminating any other active server processes 2009-11-30 13:39:38 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:38 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:37 CET 2009-11-30 13:39:38 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:38 CET LOG: record with zero length at 0/11D464C 2009-11-30 13:39:38 CET LOG: redo is not required 2009-11-30 13:39:38 CET LOG: autovacuum launcher started 2009-11-30 13:39:38 CET LOG: database system is ready to accept connections 2009-11-30 13:39:38 CET LOG: server process (PID 2248) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:38 CET LOG: terminating any other active server processes 2009-11-30 13:39:38 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:38 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:38 CET 2009-11-30 13:39:38 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:38 CET LOG: record with zero length at 0/11D4690 2009-11-30 13:39:38 CET LOG: redo is not required 2009-11-30 13:39:39 CET LOG: autovacuum launcher started 2009-11-30 13:39:39 CET LOG: database system is ready to accept connections 2009-11-30 13:39:39 CET LOG: server process (PID 2256) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:39 CET LOG: terminating any other active server processes 2009-11-30 13:39:39 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:39 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:38 CET 2009-11-30 13:39:39 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:39 CET LOG: record with zero length at 0/11D46D4 2009-11-30 13:39:39 CET LOG: redo is not required 2009-11-30 13:39:39 CET LOG: autovacuum launcher started 2009-11-30 13:39:39 CET LOG: database system is ready to accept connections 2009-11-30 13:39:39 CET LOG: server process (PID 2264) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:39 CET LOG: terminating any other active server processes 2009-11-30 13:39:39 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:39 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:39 CET 2009-11-30 13:39:39 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:40 CET LOG: record with zero length at 0/11D4718 2009-11-30 13:39:40 CET LOG: redo is not required 2009-11-30 13:39:40 CET LOG: autovacuum launcher started 2009-11-30 13:39:40 CET LOG: database system is ready to accept connections 2009-11-30 13:39:40 CET LOG: server process (PID 2272) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:40 CET LOG: terminating any other active server processes 2009-11-30 13:39:40 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:40 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:40 CET 2009-11-30 13:39:40 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:40 CET LOG: record with zero length at 0/11D475C 2009-11-30 13:39:40 CET LOG: redo is not required 2009-11-30 13:39:40 CET LOG: autovacuum launcher started 2009-11-30 13:39:40 CET LOG: database system is ready to accept connections 2009-11-30 13:39:41 CET LOG: server process (PID 2280) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:41 CET LOG: terminating any other active server processes 2009-11-30 13:39:41 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:41 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:40 CET 2009-11-30 13:39:41 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:41 CET LOG: record with zero length at 0/11D47A0 2009-11-30 13:39:41 CET LOG: redo is not required 2009-11-30 13:39:41 CET LOG: autovacuum launcher started 2009-11-30 13:39:41 CET LOG: database system is ready to accept connections 2009-11-30 13:39:41 CET LOG: server process (PID 2288) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:41 CET LOG: terminating any other active server processes 2009-11-30 13:39:41 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:41 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:41 CET 2009-11-30 13:39:41 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:41 CET LOG: record with zero length at 0/11D47E4 2009-11-30 13:39:41 CET LOG: redo is not required 2009-11-30 13:39:41 CET LOG: autovacuum launcher started 2009-11-30 13:39:41 CET LOG: database system is ready to accept connections 2009-11-30 13:39:42 CET LOG: server process (PID 2296) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:42 CET LOG: terminating any other active server processes 2009-11-30 13:39:42 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:42 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:41 CET 2009-11-30 13:39:42 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:42 CET LOG: record with zero length at 0/11D4828 2009-11-30 13:39:42 CET LOG: redo is not required 2009-11-30 13:39:42 CET LOG: autovacuum launcher started 2009-11-30 13:39:42 CET LOG: database system is ready to accept connections 2009-11-30 13:39:42 CET LOG: server process (PID 2304) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:42 CET LOG: terminating any other active server processes 2009-11-30 13:39:42 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:42 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:42 CET 2009-11-30 13:39:42 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:42 CET LOG: record with zero length at 0/11D486C 2009-11-30 13:39:42 CET LOG: redo is not required 2009-11-30 13:39:43 CET LOG: autovacuum launcher started 2009-11-30 13:39:43 CET LOG: database system is ready to accept connections 2009-11-30 13:39:43 CET LOG: server process (PID 2312) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:43 CET LOG: terminating any other active server processes 2009-11-30 13:39:43 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:43 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:42 CET 2009-11-30 13:39:43 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:43 CET LOG: record with zero length at 0/11D48B0 2009-11-30 13:39:43 CET LOG: redo is not required 2009-11-30 13:39:43 CET LOG: autovacuum launcher started 2009-11-30 13:39:43 CET LOG: database system is ready to accept connections [fail] So what happened and what can I do to solve this? Thanks for replies

    Read the article

  • Please bear with me, can someone analyze this trace route please

    - by Abdulla
    Hello, my name is Abdulla and I'm from Kuwait. Sorry for my question as I know its not technically challenging. I'm facing some problems with my internet connection while gaming, I have DSL 2mb connection. My main problem is latency, in the morning its good but after that its gets really bad. My internet provider says there's nothing wrong and that everything is working perfectly. I tried to explain to them the latency issue but they say that as long as I'm getting the download speed there isn't anything I can do about it. I only want to know if this is true and that the company can't do anything before I change my internet provider, as I feel that the guys at the contact center might getting back to me without asking tech support. Below are 2 traces I made, one in the morning and the other in the afternoon: This was taken around 17:00 Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=387ms TTL=49 Reply from 66.102.9.104: bytes=32 time=388ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Reply from 66.102.9.104: bytes=32 time=375ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 375ms, Maximum = 388ms, Average = 381ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.104] with 32 bytes of data: Reply from 66.102.9.104: bytes=32 time=376ms TTL=49 Reply from 66.102.9.104: bytes=32 time=382ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=378ms TTL=49 Reply from 66.102.9.104: bytes=32 time=374ms TTL=49 Reply from 66.102.9.104: bytes=32 time=371ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=366ms TTL=49 Reply from 66.102.9.104: bytes=32 time=353ms TTL=49 Reply from 66.102.9.104: bytes=32 time=331ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=348ms TTL=49 Reply from 66.102.9.104: bytes=32 time=365ms TTL=49 Reply from 66.102.9.104: bytes=32 time=346ms TTL=49 Reply from 66.102.9.104: bytes=32 time=335ms TTL=49 Reply from 66.102.9.104: bytes=32 time=340ms TTL=49 Reply from 66.102.9.104: bytes=32 time=344ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=328ms TTL=49 Reply from 66.102.9.104: bytes=32 time=332ms TTL=49 Reply from 66.102.9.104: bytes=32 time=326ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=325ms TTL=49 Reply from 66.102.9.104: bytes=32 time=333ms TTL=49 Reply from 66.102.9.104: bytes=32 time=338ms TTL=49 Reply from 66.102.9.104: bytes=32 time=341ms TTL=49 Ping statistics for 66.102.9.104: Packets: Sent = 26, Received = 26, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 325ms, Maximum = 382ms, Average = 348ms Control-C ^C C:\Documents and Settings\Administrator>travert google.com 'travert' is not recognized as an internal or external command, operable program or batch file. C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 7 ms 7 ms 8 ms 168.187.0.226 4 7 ms 8 ms 9 ms 168.187.0.125 5 180 ms 187 ms 188 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 209 ms 222 ms 204 ms 195.219.167.57 7 541 ms 536 ms 540 ms 195.219.167.42 8 553 ms 552 ms 538 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 547 ms 543 ms 542 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 540 ms 523 ms 531 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 755 ms 761 ms 695 ms ae-45-45.ebr1.London1.Level3.net [4.69.143.101] 12 271 ms 263 ms 400 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 701 ms 730 ms 742 ms 195.50.118.210 14 659 ms 641 ms 660 ms 209.85.255.76 15 280 ms 283 ms 292 ms 209.85.251.190 16 308 ms 293 ms 296 ms 72.14.232.239 17 679 ms 700 ms 721 ms 64.233.174.18 18 268 ms 281 ms 269 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator> This was taken at 10:00am Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Administrator>ping google.com Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=120ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 110ms, Maximum = 120ms, Average = 113ms C:\Documents and Settings\Administrator>ping google.com /t Pinging google.com [66.102.9.106] with 32 bytes of data: Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=111ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=116ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=112ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Reply from 66.102.9.106: bytes=32 time=113ms TTL=49 Reply from 66.102.9.106: bytes=32 time=115ms TTL=49 Reply from 66.102.9.106: bytes=32 time=109ms TTL=49 Reply from 66.102.9.106: bytes=32 time=110ms TTL=49 Ping statistics for 66.102.9.106: Packets: Sent = 32, Received = 32, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 109ms, Maximum = 135ms, Average = 112ms Control-C ^C C:\Documents and Settings\Administrator>tracert google.com Tracing route to google.com [66.102.9.104] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.0.1 2 6 ms 6 ms 6 ms 80-184-31-1.adsl.kems.net [80.184.31.1] 3 8 ms 7 ms 6 ms 168.187.0.226 4 6 ms 7 ms 7 ms 168.187.0.125 5 20 ms 20 ms 18 ms if-11-2.core1.RSD-Riyad.as6453.net [116.0.78.89] 6 171 ms 205 ms 215 ms 195.219.167.57 7 191 ms 215 ms 226 ms 195.219.167.42 8 * 103 ms 94 ms Vlan1102.icore1.PVU-Paris.as6453.net [195.219.24 1.109] 9 94 ms 95 ms 97 ms xe-9-1-0.edge4.paris1.level3.net [4.68.110.213] 10 94 ms 94 ms 94 ms ae-33-51.ebr1.Paris1.Level3.net [4.69.139.193] 11 101 ms 101 ms 101 ms ae-48-48.ebr1.London1.Level3.net [4.69.143.113] 12 102 ms 102 ms 101 ms ae-11-51.car1.London1.Level3.net [4.69.139.66] 13 103 ms 102 ms 103 ms 195.50.118.210 14 137 ms 103 ms 100 ms 209.85.255.76 15 130 ms 124 ms 124 ms 209.85.251.190 16 114 ms 116 ms 116 ms 72.14.232.239 17 135 ms 113 ms 126 ms 64.233.174.18 18 126 ms 125 ms 127 ms lm-in-f104.1e100.net [66.102.9.104] Trace complete. C:\Documents and Settings\Administrator>

    Read the article

  • Why doesn't pppd over ssh work here? Why can't I kill pppd?

    - by Peter V. Mørch
    I'm trying to setup a simple ppp tunnel over ssh. It works on several machines just fine. But on one machine, pppd gets "stuck": > pgrep pppd | xargs ps up USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 4178 0.0 0.1 3020 1088 pts/1 Ds+ 05:28 0:00 /usr/sbin/pppd Any attempt to kill it (even sudo kill -9 4178) has no effect that I can see. strace -p 4178 also hangs similarly. After it has been started for a while, I start getting messages in dmesg like shown below. It is started like so from another machine: ssh -t root@server /usr/sbin/pppd passive noauth When I do this to one of the machines that work, the remote end's pppd spits out garbage/binary data to the console (as expected). When I do it to the one that fails, I get no output from pppd, but the ssh session eventually times out. If I instead ssh to the machine, and then run /usr/sbin/pppd passive noauth in a separate step I also get the expected binary output. I now have a couple of questions: What could be up with the one machine where pppd fails? I don't even know where to start looking... What could be the difference between ssh -t root@server /usr/sbin/pppd passive noauth in a single step and ssh root@server and /usr/sbin/pppd passive noauth in two steps? How can it be that I can't kill the process even with sudo kill -9? The only way I know is to reboot. (I've tried searching for something similar but didn't get anywhere so I'm sorry I don't have any more leads) Any ideas? The problem machine runs in debian on VMware "hardware" (as do the ones that work) and it exhibits the problem when cloned and on both debian lenny (original) and squeeze (after upgrade) dmesg entries: [ 1198.727248] INFO: task pppd:4178 blocked for more than 120 seconds. [ 1198.727507] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1198.727904] pppd D ece2dc9c 0 4178 4174 0x00000004 [ 1198.727908] 00000098 00000082 f2503520 ece2dc9c 0000b1e7 00000000 c148d1c0 c148d1c0 [ 1198.727913] f2a06100 f6e071c0 00000000 ece2dc18 f5cd07e0 00000000 ece2d400 ece2dc9d [ 1198.727918] 00c52300 ece2dcbc f67bfef8 ec98e480 f291cec0 00000000 c10cf5b0 c10dfd21 [ 1198.727923] Call Trace: [ 1198.727926] [<c10cf5b0>] ? nameidata_to_filp+0x37/0x41 [ 1198.727929] [<c10dfd21>] ? dput+0x21/0xb7 [ 1198.727932] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1198.727935] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1198.727938] [<c11cb91b>] ? tty_ioctl+0x85f/0x8ba [ 1198.727941] [<c10fec18>] ? do_lock_file_wait+0x3d/0xd9 [ 1198.727944] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1198.727946] [<c11cb0bc>] ? tty_check_change+0xb9/0xb9 [ 1198.727949] [<c10dbeb7>] ? do_vfs_ioctl+0x485/0x4c7 [ 1198.727952] [<c10db59a>] ? do_fcntl+0x24f/0x3a2 [ 1198.727954] [<c10dbf3a>] ? sys_ioctl+0x41/0x58 [ 1198.727957] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28 [ 1318.457225] INFO: task sshd:4174 blocked for more than 120 seconds. [ 1318.457500] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1318.457896] sshd D f25024cc 0 4174 2393 0x00000000 [ 1318.457901] 00000098 00000086 f2a06940 f25024cc 0000b246 00000000 c148d1c0 c148d1c0 [ 1318.457906] f2503520 f6e071c0 00000000 3f056585 0000000f ece2d4bc 3f056585 f2503520 [ 1318.457911] ec98bb38 ec98bbdc 00000000 00000000 00000000 c12c09b5 f2503520 c10327cb [ 1318.457916] Call Trace: [ 1318.457926] [<c12c09b5>] ? schedule_hrtimeout_range_clock+0x3c/0xd9 [ 1318.457931] [<c10327cb>] ? try_to_wake_up+0x13f/0x13f [ 1318.457935] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1318.457940] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1318.457943] [<c11c9ad3>] ? tty_poll+0x32/0x5e [ 1318.457947] [<c10dd4d5>] ? do_select+0x2a1/0x42e [ 1318.457950] [<c10dcb83>] ? poll_freewait+0x69/0x69 [ 1318.457953] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457955] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457958] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457960] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457963] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457965] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457968] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457971] [<c10429c2>] ? lock_timer_base+0x19/0x35 [ 1318.457974] [<c1042eb5>] ? __mod_timer+0x10c/0x116 [ 1318.457977] [<c1042f89>] ? mod_timer+0x69/0x6e [ 1318.457981] [<c121325d>] ? sk_reset_timer+0xc/0x16 [ 1318.457984] [<c1252f57>] ? tcp_event_new_data_sent+0x66/0x6b [ 1318.457987] [<c1255b85>] ? tcp_write_xmit+0x7a7/0x86a [ 1318.457990] [<c121760d>] ? __alloc_skb+0x50/0xfd [ 1318.457994] [<c12c12bc>] ? _raw_spin_lock_bh+0x8/0x1e [ 1318.457996] [<c1212e98>] ? release_sock+0x10/0xc4 [ 1318.457999] [<c124b543>] ? tcp_sendmsg+0x6dd/0x7b7 [ 1318.458003] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1318.458006] [<c10dd7a0>] ? core_sys_select+0x13e/0x1c3 [ 1318.458009] [<c12102a3>] ? sock_aio_write+0xc0/0xd4 [ 1318.458012] [<c10d0655>] ? do_sync_write+0xa0/0xe4 [ 1318.458016] [<c10b141c>] ? handle_mm_fault+0x222/0x238 [ 1318.458019] [<c10f6096>] ? fsnotify+0x1de/0x1f9 [ 1318.458022] [<c10dd9e8>] ? sys_select+0x6e/0x8f [ 1318.458024] [<c10d105e>] ? sys_write+0x3c/0x63 [ 1318.458028] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28

    Read the article

  • Ubuntu server has slow performance

    - by Rich
    I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

    Read the article

  • Why from a virtualized Ubuntu system I can't discover the ip address of my router?

    - by AndreaNobili
    I am not into computer network and I have the following problem finding my router IP address. I have a Windows 8 PC on on which it is installed VmWare Workstation that virtualizes Linux Ubuntu. The network adapter settings of this Virtual Machine is setted as NAT. Now my problem is that if in the Windows 8 DOS shell I perform the ifconfig statment I obtain C:\Users\Andrea>ipconfig Configurazione IP di Windows Scheda Ethernet tap0: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Ethernet Connessione di rete Bluetooth: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Connessione alla rete locale (LAN)* 11: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Wi-Fi: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::89ff:6d12:49cf:4354%13 Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.3 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : 192.168.1.1 Scheda Ethernet Ethernet: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Ethernet VMware Network Adapter VMnet1: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::edb3:8352:f954:2b0c%23 Indirizzo IPv4. . . . . . . . . . . . : 192.168.129.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Ethernet VMware Network Adapter VMnet8: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::d00b:8c6e:98b:f1ec%24 Indirizzo IPv4. . . . . . . . . . . . : 192.168.15.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Tunnel Teredo Tunneling Pseudo-Interface: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.techub.lan: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Tunnel isatap.{5B95051D-79AB-4147-92CF-3A2E16698432}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.{340A5FAD-1597-402E-B658-29C37E8F7BC2}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.DSL2750B: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::5efe:192.168.1.3%26 Gateway predefinito . . . . . . . . . : So, looking at the previous output it appear clear that the default gateway (my router) is: 192.168.1.1, infact if I open it into a browser it apear to me the login mask to enter in the router settings.... Ok, if now I open the virtualized Ubuntu shell and perform the route command I obtain this output: andrea@andrea-virtual-machine:~$ route Tabella di routing IP del kernel Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.15.2 0.0.0.0 UG 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.15.0 * 255.255.255.0 U 1 0 0 eth0 So, here it say to me that the default gateway is 192.168.15.2 (that is not my router ip address), why? My idea is that it could depend by the NAT. Because my Windows system is connected using the wireless but in the virtualized Ubuntu I see that I am connected to a "wired network". So I think that the NAT virtualize a network adapter (or something like this) and that 192.168.15.2 could be the ip address of this network adapter... But it seems strange to me because, as you can see in the previous ipconfig output the VmWare network adapter addresses are: 192.168.129.1 and 192.168.15.1. So I have also 2 others doubts: 1) What device represents the 192.168.15.2 ip address that the virtualized Ubuntu see as Default gateway but that is not my router? 2) What exactly do the two VmWare network adapter that I have configured into my Windows 8 system? There is a way to discover my router ip from the virtualized Ubuntu system ? Tnx Andrea

    Read the article

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • Bacula & Multiple Tape Devices, and so on

    - by Tom O'Connor
    Bacula won't make use of 2 tape devices simultaneously. (Search for #-#-# for the TL;DR) A little background, perhaps. In the process of trying to get a decent working backup solution (backing up 20TB ain't cheap, or easy) at $dayjob, we bought a bunch of things to make it work. Firstly, there's a Spectra Logic T50e autochanger, 40 slots of LTO5 goodness, and that robot's got a pair of IBM HH5 Ultrium LTO5 drives, connected via FibreChannel Arbitrated Loop to our backup server. There's the backup server.. A Dell R715 with 2x 16 core AMD 62xx CPUs, and 32GB of RAM. Yummy. That server's got 2 Emulex FCe-12000E cards, and an Intel X520-SR dual port 10GE NIC. We were also sold Commvault Backup (non-NDMP). Here's where it gets really complicated. Spectra Logic and Commvault both sent respective engineers, who set up the library and the software. Commvault was running fine, in so far as the controller was working fine. The Dell server has Ubuntu 12.04 server, and runs the MediaAgent for CommVault, and mounts our BlueArc NAS as NFS to a few mountpoints, like /home, and some stuff in /mnt. When backing up from the NFS mountpoints, we were seeing ~= 290GB/hr throughput. That's CRAP, considering we've got 20-odd TB to get through, in a <48 hour backup window. The rated maximum on the BlueArc is 700MB/s (2460GB/hr), the rated maximum write speed on the tape devices is 140MB/s, per drive, so that's 492GB/hr (or double it, for the total throughput). So, the next step was to benchmark NFS performance with IOzone, and it turns out that we get epic write performance (across 20 threads), and it's like 1.5-2.5TB/hr write, but read performance is fecking hopeless. I couldn't ever get higher than 343GB/hr maximum. So let's assume that the 343GB/hr is a theoretical maximum for read performance on the NAS, then we should in theory be able to get that performance out of a) CommVault, and b) any other backup agent. Not the case. Commvault seems to only ever give me 200-250GB/hr throughput, and out of experimentation, I installed Bacula to see what the state of play there is. If, for example, Bacula gave consistently better performance and speeds than Commvault, then we'd be able to say "**$.$ Refunds Plz $.$**" #-#-# Alas, I found a different problem with Bacula. Commvault seems pretty happy to read from one part of the mountpoint with one thread, and stream that to a Tape device, whilst reading from some other directory with the other thread, and writing to the 2nd drive in the autochanger. I can't for the life of me get Bacula to mount and write to two tape drives simultaneously. Things I've tried: Setting Maximum Concurrent Jobs = 20 in the Director, File and Storage Daemons Setting Prefer Mounted Volumes = no in the Job Definition Setting multiple devices in the Autochanger resource. Documentation seems to be very single-drive centric, and we feel a little like we've strapped a rocket to a hamster, with this one. The majority of example Bacula configurations are for DDS4 drives, manual tape swapping, and FreeBSD or IRIX systems. I should probably add that I'm not too bothered if this isn't possible, but I'd be surprised. I basically want to use Bacula as proof to stick it to the software vendors that they're overpriced ;) I read somewhere that @KyleBrandt has done something similar with a modern Tape solution.. Configuration Files: *bacula-dir.conf* # # Default Bacula Director Configuration file Director { # define myself Name = backuphost-1-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 20 Password = "yourekiddingright" # Console password Messages = Daemon DirAddress = 0.0.0.0 #DirAddress = 127.0.0.1 } JobDefs { Name = "DefaultFileJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } JobDefs { Name = "DefaultTapeJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = "SpectraLogic" Messages = Standard Pool = AllTapes Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" Prefer Mounted Volumes = no } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultFileJob" } Job { Name = "BackupThisVolume" JobDefs = "DefaultTapeJob" FileSet = "SpecialVolume" } #Job { # Name = "BackupClient2" # Client = backuphost-12-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultFileJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=backuphost-1-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /srv/bacula/restore } FileSet { Name = "SpecialVolume" Include { Options { signature = MD5 } File = /mnt/SpecialVolume } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } File = /usr/sbin } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = backuphost-1-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "surelyyourejoking" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = backuphost-12-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "i'mnotjokinganddontcallmeshirley" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "lalalalala" Device = FileStorage Media Type = File } Storage { Name = "SpectraLogic" Address = localhost SDPort = 9103 Password = "linkedinmakethebestpasswords" Device = Drive-1 Device = Drive-2 Media Type = LTO5 Autochanger = yes } # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; DB Address = ""; dbuser = "bacula"; dbpassword = "bbmaster63" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } Pool { Name = AllTapes Pool Type = Backup Recycle = yes AutoPrune = yes # Prune expired volumes Volume Retention = 31 days # one Moth } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = backuphost-1-mon Password = "LastFMalsostorePasswordsLikeThis" CommandACL = status, .status } bacula-sd.conf # # Default Bacula Storage Daemon Configuration file # Storage { # definition of myself Name = backuphost-1-sd SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 SDAddress = 0.0.0.0 # SDAddress = 127.0.0.1 } # # List Directors who are permitted to contact Storage daemon # Director { Name = backuphost-1-dir Password = "passwordslinplaintext" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # Director { Name = backuphost-1-mon Password = "totalinsecurityabound" Monitor = yes } Device { Name = FileStorage Media Type = File Archive Device = /srv/bacula/archive LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } Autochanger { Name = SpectraLogic Device = Drive-1 Device = Drive-2 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg4 } Device { Name = Drive-1 Drive Index = 0 Archive Device = /dev/nst0 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } Device { Name = Drive-2 Drive Index = 1 Archive Device = /dev/nst1 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } # # Send all messages to the Director, # mount messages also are sent to the email address # Messages { Name = Standard director = backuphost-1-dir = all } bacula-fd.conf # # Default Bacula File Daemon Configuration file # # # List Directors who are permitted to contact this File daemon # Director { Name = backuphost-1-dir Password = "hahahahahaha" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = backuphost-1-mon Password = "hohohohohho" Monitor = yes } # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = backuphost-1-fd FDport = 9102 # where we listen for the director WorkingDirectory = /var/lib/bacula Pid Directory = /var/run/bacula Maximum Concurrent Jobs = 20 #FDAddress = 127.0.0.1 FDAddress = 0.0.0.0 } # Send all messages except skipped files back to Director Messages { Name = Standard director = backuphost-1-dir = all, !skipped, !restored }

    Read the article

  • How to remove the hint in the terminal?

    - by jiangchengwu
    As a normal user , when I run some command like ps\netstat, the terminal hint me: (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) I know could redirect STDERR to /dev/null can remove this hint. But I want to know is there any way to remove it , such as edit some configuration files ? [deploy@storage2 ~]$ ps -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) procps version 3.2.7 [deploy@storage2 ~]$ ps -V 2>/dev/null procps version 3.2.7 My OS info: [deploy@storage2 ~]$ uname -a Linux storage2 2.6.18-243.el5 #1 SMP Mon Feb 7 18:47:27 EST 2011 x86_64 x86_64 x86_64 GNU/Linux [deploy@storage2 ~]$ lsb_release LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch [deploy@storage2 ~]$ netstat -V (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) net-tools 1.60 netstat 1.42 (2001-04-15) Fred Baumgarten, Alan Cox, Bernd Eckenfels, Phil Blundell, Tuan Hoang and others +NEW_ADDRT +RTF_IRTT +RTF_REJECT +FW_MASQUERADE +I18N AF: (inet) +UNIX +INET +INET6 +IPX +AX25 +NETROM +X25 +ATALK +ECONET +ROSE HW: +ETHER +ARC +SLIP +PPP +TUNNEL +TR +AX25 +NETROM +X25 +FR +ROSE +ASH +SIT +FDDI +HIPPI +HDLC/LAPB There are more info from strace: [deploy@storage2 ~]$ strace ps -V execve("/bin/ps", ["ps", "-V"], [/* 27 vars */]) = 0 brk(0) = 0x929a000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnsl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \241\210\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=101404, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fdd000 mmap2(0x887000, 92104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x887000 mmap2(0x89a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12) = 0x89a000 mmap2(0x89c000, 6088, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x89c000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0Pzt\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=16428, ...}) = 0 mmap2(0x747000, 12408, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x747000 mmap2(0x749000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x749000 close(3) = 0 open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\204p\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=208352, ...}) = 0 mmap2(0x705000, 155760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x705000 mmap2(0x72a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24) = 0x72a000 close(3) = 0 open("/lib/libcrypt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340\246q\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=45288, ...}) = 0 mmap2(0x71a000, 201020, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fab000 mmap2(0xf7fb4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7fb4000 mmap2(0xf7fb6000, 155964, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fb6000 close(3) = 0 open("/lib/libutil.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \n\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=13420, ...}) = 0 mmap2(NULL, 12428, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7fa7000 mmap2(0xf7fa9000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xfffffffff7fa9000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@(s\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=129716, ...}) = 0 mmap2(0x72e000, 90596, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x72e000 mmap2(0x741000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x741000 mmap2(0x743000, 4580, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x743000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\340?]\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1611564, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa6000 mmap2(0x5be000, 1328580, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5be000 mmap2(0x6fd000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13f) = 0x6fd000 mmap2(0x700000, 9668, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x700000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7fa5000 set_thread_area(0xffd61bb4) = 0 mprotect(0x6fd000, 8192, PROT_READ) = 0 mprotect(0x741000, 4096, PROT_READ) = 0 mprotect(0xf7fa9000, 4096, PROT_READ) = 0 mprotect(0xf7fb4000, 4096, PROT_READ) = 0 mprotect(0x72a000, 4096, PROT_READ) = 0 mprotect(0x749000, 4096, PROT_READ) = 0 mprotect(0x89a000, 4096, PROT_READ) = 0 mprotect(0x5ba000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 set_tid_address(0xf7fa5708) = 20214 set_robust_list(0xf7fa5710, 0xc) = 0 futex(0xffd61f74, FUTEX_WAKE_PRIVATE, 1) = 0 rt_sigaction(SIGRTMIN, {0x4007323d0, [], 0}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x10000004007322e0, [], 0}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=-4284481536, rlim_max=67108864*1024}) = 0 uname({sys="Linux", node="storage2", ...}) = 0 readlink("/proc/self/exe", "/bin/ps"..., 260) = 7 brk(0) = 0x929a000 brk(0x92bb000) = 0x92bb000 open("/bin/ps", O_RDONLY|O_LARGEFILE) = 3 _llseek(3, -12, [711660], SEEK_END) = 0 read(3, "\274U!\253\2\0\0\0\224\237\t\0", 12) = 12 mmap2(NULL, 634880, PROT_READ, MAP_SHARED, 3, 0x13) = 0xfffffffff7f0a000 mmap2(NULL, 630784, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7e70000 close(3) = 0 futex(0x74a06c, FUTEX_WAKE_PRIVATE, 2147483647) = 0 geteuid32() = 501 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=99752, ...}) = 0 mmap2(NULL, 99752, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7fde000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\30\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=46680, ...}) = 0 mmap2(NULL, 41616, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7e65000 mmap2(0xf7e6e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0xfffffffff7e6e000 close(3) = 0 mprotect(0xf7e6e000, 4096, PROT_READ) = 0 munmap(0xf7fde000, 99752) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=2166, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7ff6000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2166 close(3) = 0 munmap(0xf7ff6000, 4096) = 0 mkdir("/tmp/pdk-deploy/", 0755) = -1 EEXIST (File exists) mkdir("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a", 0755) = -1 EEXIST (File exists) open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY|O_LARGEFILE) = 3 close(3) = 0 open("/tmp/pdk-deploy/fcb734befe617ec3ae1edc38da810a5a/libperl.so", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300!\2\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0664, st_size=1264090, ...}) = 0 mmap2(NULL, 1140104, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7d4e000 mmap2(0xf7e5a000, 45056, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b) = 0xfffffffff7e5a000 close(3) = 0 rt_sigaction(SIGFPE, {0x1000000000000001, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|SA_SIGINFO|0x3d61cb8, (nil)}, {SIG_DFL, ~[HUP INT ILL ABRT BUS SEGV USR2 PIPE ALRM TERM STOP TSTP TTIN TTOU XCPU WINCH IO PWR SYS RTMIN RT_1 RT_2 RT_4 RT_5 RT_8 RT_9 RT_11 RT_12 RT_13 RT_16 RT_17 RT_18 RT_22 RT_24 RT_25 RT_26 RT_27 RT_28 RT_29 RT_30 RT_31], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 getuid32() = 501 geteuid32() = 501 getgid32() = 502 getegid32() = 502 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=56454896, ...}) = 0 mmap2(NULL, 2097152, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7b4e000 mmap2(NULL, 241664, PROT_READ, MAP_PRIVATE, 3, 0x13ec) = 0xfffffffff7b13000 mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE, 3, 0x1466) = 0xfffffffff7b12000 close(3) = 0 mmap2(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7af1000 time(NULL) = 1348210009 readlink("/proc/self/exe", "/bin/ps"..., 4095) = 7 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 _llseek(0, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(1, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) ioctl(2, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd618a8) = -1 EINVAL (Invalid argument) _llseek(2, 0, 0xffd618d0, SEEK_CUR) = -1 ESPIPE (Illegal seek) open("/dev/null", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61978) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 rt_sigaction(SIGCHLD, NULL, {SIG_DFL, [], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 brk(0x92dc000) = 0x92dc000 getppid() = 20212 stat64("/opt/ActivePerl-5.8/site/lib/sitecustomize.pl", 0xffd61560) = -1 ENOENT (No such file or directory) close(3) = 0 open("/usr/lib/.khostd/.hostconf", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61828) = -1 ENOTTY (Inappropriate ioctl for device) _llseek(3, 0, [0], SEEK_CUR) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=334, ...}) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 read(3, "bindport=9001\ntrustip=221.122.57"..., 4096) = 334 read(3, "", 4096) = 0 close(3) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20215 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 read(3, (Not all processes could be identified, non-owned process info will not be shown, you would have to be root to see it all.) "tcp 0 0 0.0.0.0:9001"..., 4096) = 109 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- fstat64(3, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_RESTART|SA_RESETHAND|0x22302d0}, 8) = 0 waitpid(20215, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20215 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [TRAP BUS FPE USR1 CHLD CONT TTOU VTALRM IO RTMIN], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/usr/lib/.khostd") = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20218 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20218, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20218 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 chdir("/home/deploy") = 0 stat64("/etc/cron.hourly/hichina", {st_mode=S_IFREG|0755, st_size=711660, ...}) = 0 pipe([3, 4]) = 0 pipe([5, 6]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0) = 20230 close(6) = 0 close(4) = 0 read(5, "", 4) = 0 close(5) = 0 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xffd61868) = -1 EINVAL (Invalid argument) _llseek(3, 0, 0xffd61890, SEEK_CUR) = -1 ESPIPE (Illegal seek) read(3, "procps version 3.2.7\n", 4096) = 21 read(3, "", 4096) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- close(3) = 0 rt_sigaction(SIGHUP, {0x1, [], SA_RESTORER|SA_STACK|SA_RESTART|SA_INTERRUPT|SA_NODEFER|SA_RESETHAND|0x3d61850, (nil)}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGINT, {0x1, [], SA_STACK|0x129b3d8}, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], 0}, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, 8) = 0 waitpid(20230, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0) = 20230 rt_sigaction(SIGHUP, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGINT, {SIG_DFL, [HUP INT], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 rt_sigaction(SIGQUIT, {SIG_DFL, ~[HUP INT ILL TRAP KILL SEGV ALRM TERM STKFLT CHLD TSTP TTOU RT_1 RT_2 RT_3 RT_6 RT_9 RT_11 RT_14 RT_15 RT_16 RT_17 RT_20 RT_22], SA_NOCLDSTOP|SA_NOCLDWAIT}, NULL, 8) = 0 write(1, "procps version 3.2.7\n", 21procps version 3.2.7 ) = 21 munmap(0xf7af1000, 135168) = 0 munmap(0xf7e70000, 630784) = 0 munmap(0xf7f0a000, 634880) = 0 munmap(0xf7d4e000, 1140104) = 0 exit_group(0) = ? [ Process PID=20214 runs in 32 bit mode. ] Thank you very much.

    Read the article

  • How to stop a ICMP attack?

    - by cumhur onat
    We are under a heavy icmp flood attack. Tcpdump shows the result below. Altough we have blocked ICMP with iptables tcpdump still prints icmp packets. I've also attached iptables configuration and "top" result. Is there any thing I can do to completely stop icmp packets? [root@server downloads]# tcpdump icmp -v -n -nn tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 03:02:47.810957 IP (tos 0x0, ttl 49, id 16007, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 124, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811559 IP (tos 0x0, ttl 49, id 16010, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811922 IP (tos 0x0, ttl 49, id 16012, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812485 IP (tos 0x0, ttl 49, id 16015, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 126, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812613 IP (tos 0x0, ttl 49, id 16016, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812992 IP (tos 0x0, ttl 49, id 16018, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.813582 IP (tos 0x0, ttl 49, id 16020, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814092 IP (tos 0x0, ttl 49, id 16023, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814233 IP (tos 0x0, ttl 49, id 16024, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815579 IP (tos 0x0, ttl 49, id 16025, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815726 IP (tos 0x0, ttl 49, id 16026, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815890 IP (tos 0x0, ttl 49, id 16027, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 iptables configuration: [root@server etc]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ofis tcp -- anywhere anywhere tcp dpt:mysql ofis tcp -- anywhere anywhere tcp dpt:ftp DROP icmp -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination DROP icmp -- anywhere anywhere Chain ofis (2 references) target prot opt source destination ACCEPT all -- OUR_OFFICE_IP anywhere DROP all -- anywhere anywhere top: top - 03:12:19 up 400 days, 15:43, 3 users, load average: 1.49, 1.67, 2.61 Tasks: 751 total, 3 running, 748 sleeping, 0 stopped, 0 zombie Cpu(s): 8.2%us, 1.0%sy, 0.0%ni, 87.9%id, 2.1%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 32949948k total, 26906844k used, 6043104k free, 4707676k buffers Swap: 10223608k total, 0k used, 10223608k free, 14255584k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 36 root 39 19 0 0 0 R 100.8 0.0 17:03.56 ksoftirqd/11 10552 root 15 0 11408 1460 676 R 5.7 0.0 0:00.04 top 7475 lighttpd 15 0 304m 22m 15m S 3.8 0.1 0:05.37 php-cgi 1294 root 10 -5 0 0 0 S 1.9 0.0 380:54.73 kjournald 3574 root 15 0 631m 11m 5464 S 1.9 0.0 0:00.65 node 7766 lighttpd 16 0 302m 19m 14m S 1.9 0.1 0:05.70 php-cgi 10237 postfix 15 0 52572 2216 1692 S 1.9 0.0 0:00.02 scache 1 root 15 0 10372 680 572 S 0.0 0.0 0:07.99 init 2 root RT -5 0 0 0 S 0.0 0.0 0:16.72 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 1:10.46 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:01.11 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 2:36.15 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.19 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 3:48.91 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.20 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 uname -a [root@server etc]# uname -a Linux thisis.oursite.com 2.6.18-238.19.1.el5 #1 SMP Fri Jul 15 07:31:24 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux arp -an [root@server downloads]# arp -an ? (77.92.136.194) at 00:25:90:04:F0:90 [ether] on eth0 ? (192.168.0.2) at 00:25:90:04:F0:91 [ether] on eth1 ? (77.92.136.193) at 00:23:9C:0B:CD:01 [ether] on eth0

    Read the article

  • HP to Cisco spanning tree root flapping

    - by Tim Brigham
    Per a recent question I recently configured both my HP (2x 2900) and Cisco (1x 3750) hardware to use MSTP for interoperability. I thought this was functional until I applied the change to the third device (HP switch 1 below) at which time the spanning tree root started flapping causing performance issues (5% packet loss) between my two HP switches. I'm not sure why. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. I'd prefer the Cisco stack to act as the root. EDIT: There is one specific line - 'spanning-tree 1 path-cost 500000' in the HP switch 2 that I didn't add and was preexisting. I'm not sure if it could have the kind of impact that I'm describing. I'm more a security and monitoring guy then networking. EDIT 2: I'm starting to believe the problem lies in the fact that the value for my MST 0 instance on the Cisco is still at the default 32768. I worked up a diagram: This is based on every show command I could find for STP. I'll make this change after hours and see if it helps. Cisco 3750 Config: version 12.2 spanning-tree mode mst spanning-tree extend system-id spanning-tree mst configuration name mstp revision 1 instance 1 vlan 1, 40, 70, 100, 250 spanning-tree mst 1 priority 0 vlan internal allocation policy ascending interface TenGigabitEthernet1/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface TenGigabitEthernet2/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address ! interface Vlan100 ip address 192.168.100.253 255.255.255.0 ! Cisco 3750 show spanning tree: show spanning-tree MST0 Spanning tree enabled protocol mstp Root ID Priority 32768 Address 0004.ea84.5f80 Cost 200000 Port 53 (TenGigabitEthernet1/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32768 (priority 32768 sys-id-ext 0) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Root FWD 2000 128.53 P2p MST1 Spanning tree enabled protocol mstp Root ID Priority 1 Address a44c.11a6.7c80 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 1 (priority 0 sys-id-ext 1) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2000 128.53 P2p Cisco 3750 show logging: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up HP Switch 1: ; J9049A Configuration Editor; Created on release #T.13.71 vlan 1 name "DEFAULT_VLAN" untagged 1-8,10,13-16,18-23,A1-A4 ip address 100.100.100.17 255.255.255.0 no untagged 9,11-12,17,24 exit vlan 100 name "192.168.100" untagged 9,11-12,17,24 tagged 1-8,10,13-16,18-23,A1-A4 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A4 no ip address exit vlan 40 name "Cafe" tagged 1,4,7,A1-A4 no ip address exit vlan 250 name "Firewall" tagged 1,4,7,A1-A4 no ip address exit vlan 70 name "DMZ" tagged 1,4,7-8,13,A1-A4 no ip address exit spanning-tree spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 password manager password operator HP Switch 1 show spanning tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 363,490 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | Auto 128 Disabled | HP Switch 1 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00842 stp: MSTI 1 starved for an MSTI Msg Rx on port A4 from 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to ... HP Switch 2 Configuration: ; J9146A Configuration Editor; Created on release #W.14.49 vlan 1 name "DEFAULT_VLAN" untagged 1,3-17,21-24,A1-A2,B2 ip address 100.100.100.36 255.255.255.0 no untagged 2,18-20,B1 exit vlan 100 name "192.168.100" untagged 2,18-20 tagged 1,3-17,21-24,A1-A2,B1-B2 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A2,B2 no ip address exit vlan 40 name "Cafe" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 250 name "Firewall" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 70 name "DMZ" tagged 1,13-14,16,A1-A2,B2 no ip address exit logging 192.168.100.18 spanning-tree spanning-tree 1 path-cost 500000 spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 HP Switch 2 Spanning Tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 21,793 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : A1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 2000 IST Remaining Hops : 19 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Forwarding | 0024a8-cd6000 2 Yes No B2 | Auto 128 Disabled | HP Switch 2 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80 00839 stp: IST Root changed from 32768:0021f7-126580 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0004ea-845f80 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00435 ports: port B1 is Blocked by STP 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: IST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80

    Read the article

  • Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

    - by MasterRoot24
    I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

    Read the article

  • How to get httrack to work with SSL on mac os x? (libssl.so not found)

    - by cwd
    I'm trying to use httrack website copier but the program is running and reporting "no-ssl" (ie: it does not have the capability to copy secure sites). From looking over this thread, it seems that the problem is either when I make & configure the program, or when I run the program, it is not finding the lib-ssl / open-ssl that I have installed. I think it is looking for /var/root/lib/libssl.so.1.0 The user on that forum states that he created a symlink which allowed httrack to find the ssl library in the non-default location. Perhaps that's what I need to do - but where do I create the link from and to? I'm not seeing that I have any libssl.so files installed on my system. Do I need the development package? If so, how do I install that? I used macports to install the current version of openssl that I have. I'm running OS X 10.6. Reserch I have run this command to try and debug: dtruss httrack 2&1 | grep ssl and that outputs this: stat64("libssl.so.1.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.1\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.1.0.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.1.0.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8p\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8p\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8o\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8o\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8n\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8n\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8m\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8m\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8l\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8l\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8k\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8k\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8j\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8j\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8g\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8g\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8b\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8b\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.8\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.8\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.7\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.7\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so.0.9.6\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF210, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so.0.9.6\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("libssl.so\0", 0x7FFF5FBFEE30, 0x7FFF5FBFF470) = -1 Err#2 stat64("/var/root/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/local/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 stat64("/usr/lib/libssl.so\0", 0x7FFF5FBFF220, 0x7FFF5FBFF470) = -1 Err#2 I have already used mac ports to install open-ssl: port installed The following ports are currently installed: beecrypt @4.2.1_2 (active) cpio @2.10_0 (active) expat @2.0.1_1 (active) flex @2.5.35_0 (active) gettext @0.18.1.1_2 (active) gperf @3.0.4_0 (active) icu @4.6_0 (active) libiconv @1.13.1_0 (active) mysql5 @5.1.53_0 (active) ncurses @5.9_0 (active) ncursesw @5.8_0 (active) neon @0.29.5_0 (active) openssl @1.0.0c_0 (active) perl5.8 @5.8.9_3 (active) popt @1.16_0 (active) python24 @2.4.6_7 (active) readline @6.1.002_0 (active) rpm @4.4.9_10 (active) sqlite3 @3.7.3_0 (active) zlib @1.2.5_0 (active) Here are the install locations: locate libssl /opt/local/lib/libssl.1.0.0.dylib /opt/local/lib/libssl.a /opt/local/lib/libssl.dylib /opt/local/lib/pkgconfig/libssl.pc /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.1.0.0.dylib /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.a /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/libssl.dylib /opt/local/var/macports/software/openssl/1.0.0c_0/opt/local/lib/pkgconfig/libssl.pc /usr/lib/libssl.0.9.7.dylib /usr/lib/libssl.0.9.8.dylib /usr/lib/libssl.0.9.dylib /usr/lib/libssl.dylib /usr/lib/pkgconfig/libssl.pc What should I do next? More Info I tried the solution below: $ DYLD_INSERT_LIBRARIES="/opt/local/lib/libssl.1.0.0.dylib" httrack Welcome to HTTrack Website Copier (Offline Browser) 3.44-1-nossl Copyright (C) Xavier Roche and other contributors To see the option list, enter a blank line or try httrack --help It is still not able to load the ssl lib: 3.44-1-nossl

    Read the article

  • OS X won't see Windows 7 in network (and vice versa)

    - by meds
    I've enabled SMB sharing in OS X Lion and have added folders to share, it says 'Windows Sharing: On' with a green circle next to it (from the sharing window) and that to access the volume I will need to to go to \\192.168.0.17. It also says that the OS X should be visible as 'macbook' in the network. Both my WIndows 7 and OS X are connected to the same network, yet when I try to go to \\192.168.0.17 or from the Mac try to go to my Windows system (smb://192.168.0.6) the two OSs don't see each other. Any ideas why? Attempting to ping the Mac from Windows results in this output in the command prompt: Pinging 192.168.0.17 with 32 bytes of data: Reply from 192.168.0.6: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.0.17: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), ipconfig in Windows is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::8918:efd1:b05c:890f%21 IPv4 Address. . . . . . . . . . . : 192.168.0.6 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::98ab:63fc:3c07:d837%13 IPv4 Address. . . . . . . . . . . : 192.168.74.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::80ff:c575:7b50:3a10%14 IPv4 Address. . . . . . . . . . . : 192.168.21.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{2E97D0AE-9E18-4072-AC23-1979BA0DCB79}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{E260CE43-E9A7-4DE0-A88E-4EAFF68ACDDB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{A5130812-59CE-4DDF-9C35-9433BCED9831}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{134BCAE7-CFFF-4A98-8DA0-3708806AABEB}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter isatap.{8D9E3B8F-161C-4ACE-B211-3EDD694416B2}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : in OS X: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether c8:2a:14:01:24:c1 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether e0:f8:47:0c:fe:04 inet6 fe80::e2f8:47ff:fe0c:fe04%en1 prefixlen 64 scopeid 0x5 inet 192.168.0.17 netmask 0xffffff00 broadcast 192.168.0.255 media: autoselect status: active p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 02:f8:47:0c:fe:04 media: autoselect status: inactive fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 70:cd:60:ff:fe:d8:f1:32 media: autoselect <full-duplex> status: inactive

    Read the article

  • Cisco VPN Client Behind ASA 5505

    - by fdf33
    I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

    Read the article

  • DNS Problems (NIGHTMARES!) with BIND and Virtualmin

    - by Nyxynyx
    I have a webserver (Ubuntu 12.04 with LAMP) using Virtualmin / Webmin. Because I just moved from a Cpanel system, I am having a nightmare configuring the DNS! Using intoDNS.com, the failed reports are: Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records. DNS servers responded ERROR: One or more of your nameservers did not respond: The ones that did not respond are: 123.123.123.123 213.251.188.141x Multiple Nameservers ERROR: Looks like you have less than 2 nameservers. According to RFC2182 section 5 you must have at least 3 nameservers, and no more than 7. Having 2 nameservers is also ok by me. Missing nameservers reported by your nameserver You should already know that your NS records at your nameservers are missing, so here it is again: ns1.mydomain.com. sdns2.ovh.net. SOA record No valid SOA record came back! MX Records WWW A Record ERROR: I could not get any A records for www.mydomain.com! Step-by-Step of my Attempt In my domain registrar (Namecheap), I registered ns1.mydomain.com as a nameserver, pointing to the IP address of my web server which is running bind9. The domain is setup with DNS ns1.mydomain.com and sdns2.ovh.net. sdns2.ovh.net is a secondary DNS server (SLAVE and pointing mydomain.com to the IP address of my web server) Webserver domain: mydomain.com Webserver hostname: ns4000000.ip-123-123-123.net Webserver IP: 123.123.123.123 Under Virtualmin, I edited the default Virtual server template, BIND DNS records for new domains: ns1.mydomain.com Master DNS server hostname: ns1.mydomain.com Next I created a Virtual server using that server template. This is what I've done but its still not working! Any ideas? I've been stuck for days, thank you for all your help! service bind9 status * bind9 is running lsof -i :53 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME named 6966 bind 20u IPv6 338583 0t0 TCP *:domain (LISTEN) named 6966 bind 21u IPv4 338588 0t0 TCP localhost.localdomain:domain (LISTEN) named 6966 bind 22u IPv4 338590 0t0 TCP ns4000000.ip-123-123-123.net:domain (LISTEN) named 6966 bind 512u IPv6 338582 0t0 UDP *:domain named 6966 bind 513u IPv4 338587 0t0 UDP localhost.localdomain:domain named 6966 bind 514u IPv4 338589 0t0 UDP ns4000000.ip-123-123-123.net:domain /etc/resolv.con (Not sure how 213.186.33.99 got here) nameserver 127.0.0.1 nameserver 213.186.33.99 search ovh.net host 123.123.123.123 (my web server's IP) 13.60.245.198.in-addr.arpa domain name pointer ns4000000.ip-123-123-123.net. nslookup 213.186.33.99 Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: 99.33.186.213.in-addr.arpa name = cdns.ovh.net. Authoritative answers can be found from: 33.186.213.in-addr.arpa nameserver = ns.ovh.net. 33.186.213.in-addr.arpa nameserver = dns.ovh.net. nslookup ns1.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup ns2.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup www.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached dig mydomain.com ; <<>> DiG 9.8.1-P1 <<>> mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43540 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:09 2012 ;; MSG SIZE rcvd: 30 dig ns1.mydomain.com ; <<>> DiG 9.8.1-P1 <<>> ns1.mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31254 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ns1.mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:16 2012 ;; MSG SIZE rcvd: 34 /etc/bind/named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; /etc/bind/named.conf.default-zones zone "." { type hint; file "/etc/bind/db.root"; }; zone "localhost" { type master; file "/etc/bind/db.local"; }; zone "127.in-addr.arpa" { type master; file "/etc/bind/db.127"; }; zone "0.in-addr.arpa" { type master; file "/etc/bind/db.0"; }; zone "255.in-addr.arpa" { type master; file "/etc/bind/db.255"; }; /etc/bind/named.conf.local zone "mydomain.com" { type master; file "/var/lib/bind/mydomain.com.hosts"; allow-transfer { 127.0.0.1; localnets; }; }; /etc/bind/named.conf.options options { directory "/var/cache/bind"; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; // allow-recursion { 127.0.0.1; }; // transfer-source; }; named-checkconf -z dns_master_load: /var/lib/bind/mydomain.com.hosts:21: unexpected end of line dns_master_load: /var/lib/bind/mydomain.com.hosts:20: unexpected end of input /var/lib/bind/mydomain.com.hosts: file does not end with newline zone mydomain.com/IN: loading from master file /var/lib/bind/mydomain.com.hosts failed: unexpected end of input zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: unexpected end of input zone localhost/IN: loaded serial 2 zone 127.in-addr.arpa/IN: loaded serial 1 zone 0.in-addr.arpa/IN: loaded serial 1 zone 255.in-addr.arpa/IN: loaded serial 1 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:submission ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

    Read the article

  • How can I get FreeNAS to respond to libvirt shutdown requests

    - by ptomli
    I have a KVM VM of FreeNAS 0.7.1 Shere (revision 5127) running on Ubuntu Server 10.04 and I'm unable to convince the VM to shutdown from the host virsh shutdown freenas I would expect this to send some ACPI? trigger to the VM and FreeNAS then do what it's told. I'm not a FreeBSD fundi so I don't really know what packages or processes to poke to get this running. I have tried to convince powerd to run, but the VM cpus don't have the required freq entry Sysctl HW $ sysctl hw hw.machine: amd64 hw.model: QEMU Virtual CPU version 0.12.3 hw.ncpu: 1 hw.byteorder: 1234 hw.physmem: 523116544 hw.usermem: 463806464 hw.pagesize: 4096 hw.floatingpoint: 1 hw.machine_arch: amd64 hw.realmem: 536850432 hw.aac.iosize_max: 65536 hw.amr.force_sg32: 0 hw.an.an_cache_iponly: 1 hw.an.an_cache_mcastonly: 0 hw.an.an_cache_mode: dbm hw.an.an_dump: off hw.ata.to: 15 hw.ata.wc: 1 hw.ata.atapi_dma: 1 hw.ata.ata_dma_check_80pin: 1 hw.ata.ata_dma: 1 hw.ath.txbuf: 200 hw.ath.rxbuf: 40 hw.ath.regdomain: 0 hw.ath.countrycode: 0 hw.ath.xchanmode: 1 hw.ath.outdoor: 1 hw.ath.calibrate: 30 hw.ath.hal.swba_backoff: 0 hw.ath.hal.sw_brt: 10 hw.ath.hal.dma_brt: 2 hw.bce.msi_enable: 1 hw.bce.tso_enable: 1 hw.bge.allow_asf: 0 hw.cardbus.cis_debug: 0 hw.cardbus.debug: 0 hw.cs.recv_delay: 570 hw.cs.ignore_checksum_failure: 0 hw.cs.debug: 0 hw.cxgb.snd_queue_len: 50 hw.cxgb.use_16k_clusters: 1 hw.cxgb.force_fw_update: 0 hw.cxgb.singleq: 0 hw.cxgb.ofld_disable: 0 hw.cxgb.msi_allowed: 2 hw.cxgb.txq_mr_size: 1024 hw.cxgb.sleep_ticks: 1 hw.cxgb.tx_coalesce: 0 hw.firewire.hold_count: 3 hw.firewire.try_bmr: 1 hw.firewire.fwmem.speed: 2 hw.firewire.fwmem.eui64_lo: 0 hw.firewire.fwmem.eui64_hi: 0 hw.firewire.phydma_enable: 1 hw.firewire.nocyclemaster: 0 hw.firewire.fwe.rx_queue_len: 128 hw.firewire.fwe.tx_speed: 2 hw.firewire.fwe.stream_ch: 1 hw.firewire.fwip.rx_queue_len: 128 hw.firewire.sbp.tags: 0 hw.firewire.sbp.use_doorbell: 0 hw.firewire.sbp.scan_delay: 500 hw.firewire.sbp.login_delay: 1000 hw.firewire.sbp.exclusive_login: 1 hw.firewire.sbp.max_speed: -1 hw.firewire.sbp.auto_login: 1 hw.mfi.max_cmds: 128 hw.mfi.event_class: 0 hw.mfi.event_locale: 65535 hw.pccard.cis_debug: 0 hw.pccard.debug: 0 hw.cbb.debug: 0 hw.cbb.start_32_io: 4096 hw.cbb.start_16_io: 256 hw.cbb.start_memory: 2281701376 hw.pcic.pd6722_vsense: 1 hw.pcic.intr_mask: 57016 hw.pci.honor_msi_blacklist: 1 hw.pci.enable_msix: 1 hw.pci.enable_msi: 1 hw.pci.do_power_resume: 1 hw.pci.do_power_nodriver: 0 hw.pci.enable_io_modes: 1 hw.pci.host_mem_start: 2147483648 hw.syscons.kbd_debug: 1 hw.syscons.kbd_reboot: 1 hw.syscons.bell: 1 hw.syscons.saver.keybonly: 1 hw.syscons.sc_no_suspend_vtswitch: 0 hw.usb.uplcom.interval: 100 hw.usb.uvscom.interval: 100 hw.usb.uvscom.opktsize: 8 hw.wi.debug: 0 hw.wi.txerate: 0 hw.xe.debug: 0 hw.intr_storm_threshold: 1000 hw.availpages: 127714 hw.bus.devctl_disable: 0 hw.ste.rxsyncs: 0 hw.busdma.total_bpages: 32 hw.busdma.zone0.total_bpages: 32 hw.busdma.zone0.free_bpages: 32 hw.busdma.zone0.reserved_bpages: 0 hw.busdma.zone0.active_bpages: 0 hw.busdma.zone0.total_bounced: 0 hw.busdma.zone0.total_deferred: 0 hw.busdma.zone0.lowaddr: 0xffffffff hw.busdma.zone0.alignment: 2 hw.busdma.zone0.boundary: 65536 hw.clockrate: 2808 hw.instruction_sse: 1 hw.apic.enable_extint: 0 hw.kbd.keymap_restrict_change: 0 hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.cpu.cx_lowest: C1 Processes $ ps ax PID TT STAT TIME COMMAND 0 ?? DLs 0:00.00 [swapper] 1 ?? ILs 0:00.00 /sbin/init -- 2 ?? DL 0:00.08 [g_event] 3 ?? DL 0:00.29 [g_up] 4 ?? DL 0:00.33 [g_down] 5 ?? DL 0:00.00 [crypto] 6 ?? DL 0:00.00 [crypto returns] 7 ?? DL 0:00.00 [xpt_thrd] 8 ?? DL 0:00.00 [kqueue taskq] 9 ?? DL 0:00.00 [acpi_task_0] 10 ?? RL 34:12.42 [idle: cpu0] 11 ?? WL 0:01.13 [swi4: clock sio] 12 ?? WL 0:00.00 [swi3: vm] 13 ?? WL 0:00.00 [swi1: net] 14 ?? DL 0:00.04 [yarrow] 15 ?? WL 0:00.00 [swi6: task queue] 16 ?? WL 0:00.00 [swi2: cambio] 17 ?? DL 0:00.00 [acpi_task_1] 18 ?? DL 0:00.00 [acpi_task_2] 19 ?? WL 0:00.00 [swi5: +] 20 ?? DL 0:00.01 [thread taskq] 21 ?? WL 0:00.00 [swi6: Giant taskq] 22 ?? WL 0:00.00 [irq9: acpi0] 23 ?? WL 0:00.09 [irq14: ata0] 24 ?? WL 0:00.11 [irq15: ata1] 25 ?? WL 0:00.57 [irq11: ed0 uhci0] 26 ?? DL 0:00.00 [usb0] 27 ?? DL 0:00.00 [usbtask-hc] 28 ?? DL 0:00.00 [usbtask-dr] 29 ?? WL 0:00.01 [irq1: atkbd0] 30 ?? WL 0:00.00 [swi0: sio] 31 ?? DL 0:00.00 [sctp_iterator] 32 ?? DL 0:00.00 [pagedaemon] 33 ?? DL 0:00.00 [vmdaemon] 34 ?? DL 0:00.00 [idlepoll] 35 ?? DL 0:00.00 [pagezero] 36 ?? DL 0:00.01 [bufdaemon] 37 ?? DL 0:00.00 [vnlru] 38 ?? DL 0:00.14 [syncer] 39 ?? DL 0:00.01 [softdepflush] 1221 ?? Is 0:00.00 /sbin/devd 1289 ?? Is 0:00.01 /usr/sbin/syslogd -ss -f /var/etc/syslog.conf 1608 ?? Is 0:00.00 /usr/sbin/cron -s 1692 ?? Ss 0:00.03 /usr/local/sbin/mDNSResponderPosix -b -f /var/etc/mdn 1730 ?? S 0:00.43 /usr/local/sbin/lighttpd -f /var/etc/lighttpd.conf -m 1882 ?? DL 0:00.00 [system_taskq] 1883 ?? DL 0:00.00 [arc_reclaim_thread] 4139 ?? S 0:00.03 /usr/local/bin/php /usr/local/www/exec.php 4144 ?? S 0:00.00 sh -c ps ax 4145 ?? R 0:00.00 ps ax 1816 v0 Is 0:00.01 login [pam] (login) 1818 v0 I+ 0:00.03 -tcsh (csh) 1817 v1 Is+ 0:00.00 /usr/libexec/getty Pc ttyv1 1402 con- I 0:00.00 /usr/local/sbin/afpd -F /var/etc/afpd.conf 1404 con- S 0:00.00 /usr/local/sbin/cnid_metad 1682 con- I 0:02.78 /usr/local/sbin/mt-daapd -m -c /var/etc/mt-daapd.conf 1789 con- S 0:00.18 /usr/local/bin/fuppesd --config-dir /var/etc --config Libvert snippet <domain type='kvm'> <name>freenas</name> <uuid>********-****-****-****-************</uuid> <memory>524288</memory> <currentMemory>524288</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> Is this possible? Ideally I'd like to be able to stop the host without having to manually deal with shutting down the VM.

    Read the article

  • Use DivX settings to encode to mp4 with ffmpeg

    - by sjngm
    I'm used to use VirtualDub to encode a video to AVI container with DivX-codec (and MP3 for audio). Now I'm planning to use ffmpeg to encode videos to MP4 container with h264-codec. What I've figured out is that I need to use libx264 and one of those presets to make anything work. However, I'm amazed about the video bitrate ffmpeg uses for encoding. What I currently have is this little batch file: @ECHO OFF SETLOCAL SET IN=source.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-fpre "%FFMPEG_PATH%\presets\libx264-lossless_slow.ffpreset" SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %VIDEO% %PRESET% test.mp4 ENDLOCAL With this I tell ffmpeg to use 1978k as the bitrate, but ffmpeg uses 15000k+! I tried other presets, but they don't use my specified bitrate. Here are the presets I have: libx264-baseline.ffpreset libx264-ipod320.ffpreset libx264-ipod640.ffpreset libx264-lossless_fast.ffpreset libx264-lossless_max.ffpreset libx264-lossless_medium.ffpreset libx264-lossless_slow.ffpreset libx264-lossless_slower.ffpreset libx264-lossless_ultrafast.ffpreset ffmpeg version: FFmpeg git-N-29181-ga304071 libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.120. 0 / 52.120. 0 libavformat 52.108. 0 / 52.108. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 79. 0 / 1. 79. 0 libswscale 0. 13. 0 / 0. 13. 0 Note that I don't use the latest version as it has problems with spaces in filenames. Here's what seems to be the full parameter list DivX 6.9.2 uses: -bvnn 1978000 -vbv 218691200,100663296,100663296 -dir "C:\Users\sjngm\AppData\Roaming\DivX\DivX Codec" -w -b 1 -use_presets=1 -preset=10 -windowed_fullsearch=2 -thread_delay=1 What command line parameters would that be for ffmpeg? EDIT: Going with slhck's suggestion I tried a new 32-bit version. I have no idea if that is 0.9 or newer, I can't find that info. ffmpeg version N-36890-g67f5650 libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 I reworked my batch file to look like this (interestingly enough I can't find parameter -vprofile in the documentation): @ECHO OFF SETLOCAL SET IN=VTS_01_1.avs SET FFMPEG_PATH=C:\Program Files (x86)\ffmpeg SET PRESET=-vprofile high -preset veryslow SET AUDIO=-acodec libmp3lame -ab 128000 SET VIDEO=-vcodec libx264 -vb 1978000 "%FFMPEG_PATH%\ffmpeg.exe" -i %IN% %AUDIO% %PRESET% %VIDEO% test.mp4 ENDLOCAL I see that it now uses the bitrate properly (thanks to LongNeckbeard for pointing out that the lossless-stuff ignores the bitrate!). Just in case you wonder how I came up with the 1978000, I'm using this formula which I found valid for DivX-files (I'm guessing the bitrate won't change that much for h264): width * height * 25 * 0.22 / 1000 I'm not sure if the 0.22 correlates with the CRF somehow. Overall I forgot to say the I will use a two-pass scenario, which is why I don't use the CRF here. I will try to read more about this. Currently I'm just trying to get something running that shows me that I'm doing something right (ffmpeg isn't the easiest tool to understand ;)). C:\Program Files (x86)\ffmpeg\ffmpeg.exe" -i VTS_01_1.avs -acodec libmp3lame -ab 128000 -vcodec libx264 -vb 1978000 -vprofile high -preset veryslow test.mp4 The output is now: ffmpeg version N-36890-g67f5650 Copyright (c) 2000-2012 the FFmpeg developers built on Jan 16 2012 21:57:13 with gcc 4.6.2 configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 Input #0, avs, from 'VTS_01_1.avs': Duration: 00:58:46.12, start: 0.000000, bitrate: 0 kb/s Stream #0:0: Video: rawvideo (YV12 / 0x32315659), yuv420p, 576x448, 77414 kb/s, 25 tbr, 25 tbn, 25 tbc Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 48000 Hz, 2 channels, s16, 1536 kb/s File 'test.mp4' already exists. Overwrite ? [y/N] y w:576 h:448 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param: [libx264 @ 05A2C400] using cpu capabilities: MMX2 SSE2Fast FastShuffle SSEMisalign LZCNT [libx264 @ 05A2C400] profile High, level 3.1 [libx264 @ 05A2C400] 264 - core 120 r2120 0c7dab9 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=16 deblock=1:0:0 analyse=0x3:0x133 me=umh subme=10 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=24 chroma_me=1 trellis=2 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=8 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=60 rc=abr mbtree=1 bitrate=1978 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'test.mp4': Metadata: encoder : Lavf53.30.100 Stream #0:0: Video: h264 (![0][0][0] / 0x0021), yuv420p, 576x448, q=-1--1, 1978 kb/s, 25 tbn, 25 tbc Stream #0:1: Audio: mp3 (i[0][0][0] / 0x0069), 48000 Hz, 2 channels, s16, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #0:1 -> #0:1 (pcm_s16le -> libmp3lame) Press [q] to stop, [?] for help frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 0 fps= 0 q=0.0 size= 0kB time=00:00:00.00 bitrate= 0.0kbits/s frame= 3 fps= 1 q=22.0 size= 39kB time=00:00:00.04 bitrate=8063.8kbits/ frame= 8 fps= 2 q=22.0 size= 82kB time=00:00:00.24 bitrate=2801.3kbits/ frame= 13 fps= 3 q=23.0 size= 120kB time=00:00:00.44 bitrate=2229.5kbits/ frame= 16 fps= 4 q=23.0 size= 147kB time=00:00:00.56 bitrate=2156.7kbits/ frame= 20 fps= 4 q=22.0 size= 175kB time=00:00:00.72 bitrate=1987.4kbits/ : video:4387kB audio:273kB global headers:0kB muxing overhead 0.260038% [libx264 @ 05A2C400] frame I:2 Avg QP:19.53 size: 29850 [libx264 @ 05A2C400] frame P:76 Avg QP:22.24 size: 19541 [libx264 @ 05A2C400] frame B:359 Avg QP:25.93 size: 8210 [libx264 @ 05A2C400] consecutive B-frames: 0.5% 0.5% 0.0% 8.2% 17.2% 52.2% 16.0% 5.5% 0.0% [libx264 @ 05A2C400] mb I I16..4: 5.4% 75.3% 19.3% [libx264 @ 05A2C400] mb P I16..4: 1.3% 16.5% 2.2% P16..4: 36.3% 28.6% 12.7% 1.8% 0.2% skip: 0.4% [libx264 @ 05A2C400] mb B I16..4: 0.4% 3.8% 0.3% B16..8: 40.0% 18.4% 4.7% direct:18.5% skip:13.9% L0:45.4% L1:38.1% BI:16.5% [libx264 @ 05A2C400] final ratefactor: 20.35 [libx264 @ 05A2C400] 8x8 transform intra:83.1% inter:68.5% [libx264 @ 05A2C400] direct mvs spatial:99.2% temporal:0.8% [libx264 @ 05A2C400] coded y,uvDC,uvAC intra: 64.9% 83.4% 49.2% inter: 49.0% 50.4% 4.4% [libx264 @ 05A2C400] i16 v,h,dc,p: 25% 22% 27% 26% [libx264 @ 05A2C400] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 10% 7% 23% 9% 10% 10% 10%10% 13% [libx264 @ 05A2C400] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 11% 13% 9% 12% 11% 10% 9% 12% [libx264 @ 05A2C400] i8c dc,h,v,p: 42% 28% 16% 14% [libx264 @ 05A2C400] Weighted P-Frames: Y:18.4% UV:7.9% [libx264 @ 05A2C400] ref P L0: 29.1% 11.3% 15.7% 7.3% 6.9% 4.9% 5.1% 3.4%3.9% 2.7% 2.8% 1.8% 1.7% 1.2% 1.4% 0.9% [libx264 @ 05A2C400] ref B L0: 68.8% 11.4% 5.5% 2.9% 2.3% 1.9% 1.5% 1.1%1.1% 1.0% 0.9% 0.7% 0.5% 0.3% 0.1% [libx264 @ 05A2C400] ref B L1: 91.9% 8.1% [libx264 @ 05A2C400] kb/s:2055.88 As far as I'm concerned it doesn't look that bad to me.

    Read the article

  • Either, nginx+php-fpm bad config or nginx+php-fpm cannot handle high query?

    - by The Wolf
    I have wordpress installed in my server configured(hopefully with nginx+php-fpm+mariaDB). I am trying to import using wordpress importer a 1.5MB xml file. Everytime I try to upload it using the importer, it got cut of... meaning just blank screen result.. Here is my error log: actually I just posted 2 of the errors [error] 858#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xxx.xx.xx, server: xxx.com, request: "GET xxxx.html HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" [error] 858#0: *13 connect() failed (111: Connection refused) while connecting to upstream, client: xxx.x.xx.xx, server: xxx.com, request: "GET xxxx.php HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" I don't know what is the reason why it can't process the wordpress export .xml. I already increased max_file_upload & etc., but nothing happens. Hope somebody can help me. Here are my conf: nginx.conf user nginx; worker_processes 8; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; server_tokens off; keepalive_timeout 65; fastcgi_read_timeout 500; #gzip on; client_max_body_size 2M; php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. include=/etc/php-fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Default Value: none pid = /var/run/php-fpm/php-fpm.pid ; Error log file ; Default Value: /var/log/php-fpm.log error_log = /var/log/php-fpm/error.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf [root@host etc]# vim php-fpm.conf [root@host etc]# vim php-fpm.conf ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf ps aux [root@host etc]# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 2900 1380 ? Ss Jun02 0:00 init root 2 0.0 0.0 0 0 ? S Jun02 0:00 [kthreadd/9308] root 3 0.0 0.0 0 0 ? S Jun02 0:00 [khelper/9308] root 124 0.0 0.0 2464 576 ? S<s Jun02 0:00 /sbin/udevd -d root 460 0.0 0.1 35976 1308 ? Sl Jun02 0:00 /sbin/rsyslogd -i /var/run/syslogd.pid -c 5 root 474 0.0 0.0 8940 1028 ? Ss Jun02 0:00 /usr/sbin/sshd root 481 0.0 0.0 3264 876 ? Ss Jun02 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 491 0.0 0.1 6268 1432 ? S Jun02 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/host.busilak.com. mysql 584 0.1 6.8 679072 71456 ? Sl Jun02 0:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --use root 586 0.0 0.3 12008 3820 ? Ss Jun02 0:01 sshd: root@pts/0 root 629 0.0 0.0 9140 756 ? Ss Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 630 0.0 0.0 9140 520 ? S Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 645 0.0 0.1 12788 1928 ? Ss Jun02 0:01 sendmail: accepting connections smmsp 653 0.0 0.1 12576 1728 ? Ss Jun02 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue root 691 0.0 0.1 7148 1184 ? Ss Jun02 0:00 crond root 698 0.0 0.1 6272 1688 pts/0 Ss Jun02 0:00 -bash root 1006 0.0 0.0 7828 924 ? Ss 00:30 0:00 nginx: master process /usr/sbin/nginx -c /etc/nginx/nginx.conf nginx 1007 0.0 0.1 8156 1724 ? S 00:30 0:00 nginx: worker process nginx 1008 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1009 0.0 0.1 8020 1356 ? S 00:30 0:00 nginx: worker process nginx 1011 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1012 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1013 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1014 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1015 0.0 0.1 8024 1344 ? S 00:30 0:00 nginx: worker process root 1030 0.0 0.2 25396 2904 ? Ss 00:30 0:00 php-fpm: master process (/etc/php-fpm.conf) apache 1031 0.0 1.9 40700 20624 ? S 00:30 0:00 php-fpm: pool www apache 1032 0.0 2.0 41924 21888 ? S 00:30 0:01 php-fpm: pool www apache 1033 0.0 1.9 41212 20848 ? S 00:30 0:01 php-fpm: pool www apache 1034 0.0 1.9 40956 20792 ? S 00:30 0:01 php-fpm: pool www apache 1035 0.0 2.0 41560 21556 ? S 00:30 0:02 php-fpm: pool www apache 1040 0.0 1.8 39292 19120 ? S 00:30 0:00 php-fpm: pool www root 1125 0.0 0.0 6080 1040 pts/0 R+ 01:04 0:00 ps aux netstat -l [root@host etc]# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 localhost.localdomain:smtp *:* LISTEN tcp 0 0 localhost.locald:cslistener *:* LISTEN tcp 0 0 *:mysql *:* LISTEN tcp 0 0 *:http *:* LISTEN tcp 0 0 *:ssh *:* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 60575947 /var/run/saslauthd/mux unix 2 [ ACC ] STREAM LISTENING 60574168 @/com/ubuntu/upstart unix 2 [ ACC ] STREAM LISTENING 60575873 /var/lib/mysql/mysql.sock Hope somebody can help me to figure out what is the problem.

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • Connect ps/2->usb keyboard to linux?

    - by Daniel
    I have a lovely ancient ergonomic keyboard (no name SK - 6000) connected via a DIN-ps/2 adapter to a ps/2-usb adapter to my docking station. After Grub it stops working. It takes either suspending and waking up or replugging it while Linux is running to get it to work. No extra kernel modules get loaded for this. When it works and I restart without power off, it will work immediately. Even when it does not work, it is visible (lsusb device number varies but output is identical whether working or not): $ lsusb -v -s 001:006 Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a81 Chesen Electronics Corp. idProduct 0x0205 PS/2 Keyboard+Mouse Adapter bcdDevice 0.10 iManufacturer 1 CHESEN iProduct 2 PS2 to USB Converter iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 2 PS2 to USB Converter bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 148 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) $ ll -R /sys/bus/hid/drivers/ /sys/bus/hid/drivers/: total 0 drwxr-xr-x 2 root root 0 Jul 8 2012 generic-usb/ /sys/bus/hid/drivers/generic-usb: total 0 lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:046D:C03D.0003 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C03D.0003/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0001 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0002 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:0A81:0205.0002/ --w------- 1 root root 4096 Jul 7 23:32 bind lrwxrwxrwx 1 root root 0 Jul 7 23:33 module -> ../../../../module/usbhid/ --w------- 1 root root 4096 Jul 7 23:32 new_id --w------- 1 root root 4096 Jul 8 2012 uevent --w------- 1 root root 4096 Jul 7 23:32 unbind When replugging, dmesg shows this (which except for the 1st line and different input numbers already came at boot time): [ 1583.295385] usb 1-1.2.1: new low-speed USB device number 6 using ehci_hcd [ 1583.446514] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input17 [ 1583.446817] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input0 [ 1583.454764] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input18 [ 1583.455534] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input1 [ 1583.455578] usbcore: registered new interface driver usbhid [ 1583.455584] usbhid: USB HID core driver So I tried $ sudo udevadm test /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/40-usb-media-players.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 ... parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file udev_rules_new: rules use 271500 bytes tokens (22625 * 12 bytes), 44331 bytes buffer udev_rules_new: temporary index used 76320 bytes (3816 * 20 bytes) udev_device_new_from_syspath: device 0x7f78a5e4d2d0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_new_from_syspath: device 0x7f78a5e5f820 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_read_db: device 0x7f78a5e5f820 filled with db file data udev_device_new_from_syspath: device 0x7f78a5e60270 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001' udev_device_new_from_syspath: device 0x7f78a5e609c0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0' udev_device_new_from_syspath: device 0x7f78a5e61160 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1' udev_device_new_from_syspath: device 0x7f78a5e61960 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2' udev_device_new_from_syspath: device 0x7f78a5e62150 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1' udev_device_new_from_syspath: device 0x7f78a5e62940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1' udev_device_new_from_syspath: device 0x7f78a5e630f0 has devpath '/devices/pci0000:00/0000:00:1a.0' udev_device_new_from_syspath: device 0x7f78a5e638a0 has devpath '/devices/pci0000:00' udev_event_execute_rules: no node name set, will use kernel supplied name 'hidraw0' udev_node_add: creating device node '/dev/hidraw0', devnum=251:0, mode=0600, uid=0, gid=0 udev_node_mknod: preserve file '/dev/hidraw0', because it has correct dev_t udev_node_mknod: preserve permissions /dev/hidraw0, 020600, uid=0, gid=0 node_symlink: preserve already existing symlink '/dev/char/251:0' to '../hidraw0' udev_device_update_db: created empty file '/run/udev/data/c251:0' for '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' ACTION=add DEVNAME=/dev/hidraw0 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 MAJOR=251 MINOR=0 SUBSYSTEM=hidraw UDEV_LOG=6 USEC_INITIALIZED=969079051 The later lines sound like it's already there. And none of these awakes the keyboard: $ sudo udevadm trigger --verbose --sysname-match=usb* /sys/devices/pci0000:00/0000:00:1a.0/usb1 /sys/devices/pci0000:00/0000:00:1a.0/usbmon/usbmon1 /sys/devices/pci0000:00/0000:00:1d.0/usb2 /sys/devices/pci0000:00/0000:00:1d.0/usbmon/usbmon2 /sys/devices/virtual/usbmon/usbmon0 $ sudo udevadm trigger --verbose --sysname-match=hidraw0 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 $ sudo udevadm trigger I also tried this to no avail: # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind ksh: echo: write to 1 failed [No such device] # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/unbind # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind # echo usb1 >/sys/bus/usb/drivers/usb/unbind # echo usb1 >/sys/bus/usb/drivers/usb/bind What else should I try to get the same result as replugging or suspending, by just issuing a command?

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Hello everyone, Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • More interruptions than cpu context switches

    - by Christopher Valles
    I have a machine running Debian GNU/Linux 5.0.8 (lenny) 8 cores and 12Gb of RAM. We have one core permanently around 40% ~ 60% wait time and trying to spot what is happening I realized that we have more interruptions than cpu context switches. I found that the normal ratio between context switch and interruptions is around 10x more context switching than interruptions but on my server the values are completely different. backend1:~# vmstat -s 12330788 K total memory 12221676 K used memory 3668624 K active memory 6121724 K inactive memory 109112 K free memory 3929400 K buffer memory 4095536 K swap cache 4194296 K total swap 7988 K used swap 4186308 K free swap 44547459 non-nice user cpu ticks 702408 nice user cpu ticks 13346333 system cpu ticks 1607583668 idle cpu ticks 374043393 IO-wait cpu ticks 4144149 IRQ cpu ticks 3994255 softirq cpu ticks 0 stolen cpu ticks 4445557114 pages paged in 2910596714 pages paged out 128642 pages swapped in 267400 pages swapped out 3519307319 interrupts 2464686911 CPU context switches 1306744317 boot time 11555115 forks Any ideas if that is an issue? And in that case, how can I spot the cause and fix it? Update Following the instructions of the comments and focusing on the core stuck in wait I checked the processes attached to that core and below you can find the list: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 24 root RT -5 0 0 0 S 0 0.0 0:03.42 7 migration/7 25 root 15 -5 0 0 0 S 0 0.0 0:04.78 7 ksoftirqd/7 26 root RT -5 0 0 0 S 0 0.0 0:00.00 7 watchdog/7 34 root 15 -5 0 0 0 S 0 0.0 1:18.90 7 events/7 83 root 15 -5 0 0 0 S 0 0.0 1:10.68 7 kblockd/7 291 root 15 -5 0 0 0 S 0 0.0 0:00.00 7 aio/7 569 root 15 -5 0 0 0 S 0 0.0 0:00.00 7 ata/7 1545 root 15 -5 0 0 0 S 0 0.0 0:00.00 7 ksnapd 1644 root 15 -5 0 0 0 S 0 0.0 0:36.73 7 kjournald 1725 root 16 -4 16940 1152 488 S 0 0.0 0:00.00 7 udevd 2342 root 20 0 8828 1140 956 S 0 0.0 0:00.00 7 sh 2375 root 20 0 8848 1220 1016 S 0 0.0 0:00.00 7 locate 2421 root 30 10 8896 1268 1016 S 0 0.0 0:00.00 7 updatedb.findut 2430 root 30 10 58272 49m 616 S 0 0.4 0:17.44 7 sort 2431 root 30 10 3792 448 360 S 0 0.0 0:00.00 7 frcode 2682 root 15 -5 0 0 0 S 0 0.0 3:25.98 7 kjournald 2683 root 15 -5 0 0 0 S 0 0.0 0:00.64 7 kjournald 2687 root 15 -5 0 0 0 S 0 0.0 1:31.30 7 kjournald 3261 root 15 -5 0 0 0 S 0 0.0 2:30.56 7 kondemand/7 3364 root 20 0 3796 596 476 S 0 0.0 0:00.00 7 acpid 3575 root 20 0 8828 1140 956 S 0 0.0 0:00.00 7 sh 3597 root 20 0 8848 1216 1016 S 0 0.0 0:00.00 7 locate 3603 root 30 10 8896 1268 1016 S 0 0.0 0:00.00 7 updatedb.findut 3612 root 30 10 58272 49m 616 S 0 0.4 0:27.04 7 sort 3655 root 20 0 11056 2852 516 S 0 0.0 5:36.46 7 redis-server 3706 root 20 0 19832 1056 816 S 0 0.0 0:01.64 7 cron 3746 root 20 0 3796 580 484 S 0 0.0 0:00.00 7 getty 3748 root 20 0 3796 580 484 S 0 0.0 0:00.00 7 getty 7674 root 20 0 28376 1000 736 S 0 0.0 0:00.00 7 cron 7675 root 20 0 8828 1140 956 S 0 0.0 0:00.00 7 sh 7708 root 30 10 58272 49m 616 S 0 0.4 0:03.36 7 sort 22049 root 20 0 8828 1136 956 S 0 0.0 0:00.00 7 sh 22095 root 20 0 8848 1220 1016 S 0 0.0 0:00.00 7 locate 22099 root 30 10 8896 1264 1016 S 0 0.0 0:00.00 7 updatedb.findut 22108 root 30 10 58272 49m 616 S 0 0.4 0:44.55 7 sort 22109 root 30 10 3792 452 360 S 0 0.0 0:00.00 7 frcode 26927 root 20 0 8828 1140 956 S 0 0.0 0:00.00 7 sh 26947 root 20 0 8848 1216 1016 S 0 0.0 0:00.00 7 locate 26951 root 30 10 8896 1268 1016 S 0 0.0 0:00.00 7 updatedb.findut 26960 root 30 10 58272 49m 616 S 0 0.4 0:10.24 7 sort 26961 root 30 10 3792 452 360 S 0 0.0 0:00.00 7 frcode 27952 root 20 0 65948 3028 2400 S 0 0.0 0:00.00 7 sshd 30731 root 20 0 0 0 0 S 0 0.0 0:01.34 7 pdflush 31204 root 20 0 0 0 0 S 0 0.0 0:00.24 7 pdflush 21857 deploy 20 0 1227m 2240 868 S 0 0.0 2:44.22 7 nginx 21858 deploy 20 0 1228m 2784 868 S 0 0.0 2:42.45 7 nginx 21862 deploy 20 0 1228m 2732 868 S 0 0.0 2:43.90 7 nginx 21869 deploy 20 0 1228m 2840 868 S 0 0.0 2:44.14 7 nginx 27994 deploy 20 0 19372 2216 1380 S 0 0.0 0:00.00 7 bash 28493 deploy 20 0 331m 32m 16m S 4 0.3 0:00.40 7 apache2 21856 deploy 20 0 1228m 2844 868 S 0 0.0 2:43.64 7 nginx 3622 nobody 30 10 21156 10m 916 D 0 0.1 4:42.31 7 find 7716 nobody 30 10 12268 1280 888 D 0 0.0 0:43.50 7 find 22116 nobody 30 10 12612 1696 916 D 0 0.0 6:32.26 7 find 26968 nobody 30 10 12268 1284 888 D 0 0.0 1:56.92 7 find Update As suggested I take a look at /proc/interrupts and below the info there: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 35 0 0 1469085485 0 0 0 0 IO-APIC-edge timer 1: 0 0 0 8 0 0 0 0 IO-APIC-edge i8042 8: 0 0 0 1 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 0 0 0 105 0 0 0 0 IO-APIC-edge i8042 16: 0 0 0 0 0 0 0 580212114 IO-APIC-fasteoi 3w-9xxx, uhci_hcd:usb1 18: 0 0 142 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb6, ehci_hcd:usb7 19: 9 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb5 21: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 23: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb4, ehci_hcd:usb8 1273: 0 0 1600400502 0 0 0 0 0 PCI-MSI-edge eth0 1274: 0 0 0 0 0 0 0 0 PCI-MSI-edge ahci NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts LOC: 214252181 69439018 317298553 21943690 72562482 56448835 137923978 407514738 Local timer interrupts RES: 27516446 16935944 26430972 44957009 24935543 19881887 57746906 24298747 Rescheduling interrupts CAL: 10655 10705 10685 10567 10689 10669 10667 396 function call interrupts TLB: 529548 462587 801138 596193 922202 747313 2027966 946594 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts ERR: 0 All the values seems more or less the same for all the cores but this one IO-APIC-fasteoi 3w-9xxx, uhci_hcd:usb1 only affects to the core 7 (the same with the wait time of 40% ~ 60%) could be something attached to the usb port causing the issue? Thanks in advanced

    Read the article

  • CentOS 6 LEMP update - dependency error issue

    - by Latheesan Kanes
    I have setup a LEMP server following the guide Install Nginx/PHP-FPM on Fedora 20/19, CentOS/RHEL 6.5/5.10. It's been a while since I did the setup, so I wanted to grab the latest updates from REMI repository. I ran the following command: yum --enablerepo=remi,remi-php55 update I now get these dependency related errors: # yum --enablerepo=remi update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.nl.leaseweb.net * epel: mirror.1000mbps.com * extras: mirror.nl.leaseweb.net * remi: remi.schlundtech.de * updates: centos.mirror1.spango.com Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6 will be updated ---> Package chkconfig.x86_64 0:1.3.49.3-2.el6_4.1 will be an update ---> Package glibc.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.4 will be updated ---> Package glibc-common.x86_64 0:2.12-1.107.el6_4.5 will be an update ---> Package gnupg2.x86_64 0:2.0.14-4.el6 will be updated ---> Package gnupg2.x86_64 0:2.0.14-6.el6_4 will be an update ---> Package iputils.x86_64 0:20071127-17.el6_4 will be updated ---> Package iputils.x86_64 0:20071127-17.el6_4.2 will be an update ---> Package kernel.x86_64 0:2.6.32-358.23.2.el6 will be installed ---> Package kernel-firmware.noarch 0:2.6.32-358.18.1.el6 will be updated ---> Package kernel-firmware.noarch 0:2.6.32-358.23.2.el6 will be an update ---> Package libgcrypt.x86_64 0:1.4.5-9.el6_2.2 will be updated ---> Package libgcrypt.x86_64 0:1.4.5-11.el6_4 will be an update ---> Package mysql-libs.x86_64 0:5.1.69-1.el6_4 will be updated --> Processing Dependency: libmysqlclient.so.16()(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 --> Processing Dependency: libmysqlclient.so.16(libmysqlclient_16)(64bit) for package: 2:postfix-2.6.6-2.2.el6_1.x86_64 ---> Package mysql-libs.x86_64 0:5.5.34-1.el6.remi will be an update ---> Package nginx.x86_64 0:1.4.2-1.el6.ngx will be updated ---> Package nginx.x86_64 0:1.4.3-1.el6.ngx will be an update ---> Package php-pear.noarch 1:1.9.4-20.el6.remi will be updated ---> Package php-pear.noarch 1:1.9.4-23.el6.remi will be an update ---> Package php-pecl-jsonc.x86_64 0:1.3.2-1.el6.remi.1 will be updated ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.3-1.el6.remi.1 will be updated ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.3.svn313074.el6.remi.5 will be updated ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 ---> Package postgresql-libs.x86_64 0:8.4.13-1.el6_3 will be updated ---> Package postgresql-libs.x86_64 0:8.4.18-1.el6_4 will be an update ---> Package remi-release.noarch 0:6-2.el6.remi will be updated ---> Package remi-release.noarch 0:6.4-1.el6.remi will be an update ---> Package rsync.x86_64 0:3.0.6-9.el6 will be updated ---> Package rsync.x86_64 0:3.0.6-9.el6_4.1 will be an update ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.12 will be updated ---> Package selinux-policy-targeted.noarch 0:3.7.19-195.el6_4.18 will be an update ---> Package setup.noarch 0:2.8.14-20.el6 will be updated ---> Package setup.noarch 0:2.8.14-20.el6_4.1 will be an update ---> Package tzdata.noarch 0:2013c-2.el6 will be updated ---> Package tzdata.noarch 0:2013g-1.el6 will be an update ---> Package xinetd.x86_64 2:2.3.14-38.el6 will be updated ---> Package xinetd.x86_64 2:2.3.14-39.el6_4 will be an update --> Running transaction check ---> Package compat-mysql51.x86_64 0:5.1.54-1.el6.remi will be installed ---> Package php-pecl-jsonc.x86_64 0:1.3.2-2.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 ---> Package php-pecl-mongo.x86_64 0:1.4.4-1.el6.remi will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 ---> Package php-pecl-sqlite.x86_64 0:2.0.0-0.4.svn332053.el6.remi.5.4 will be an update --> Processing Dependency: php(zend-abi) = 20100525-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Processing Dependency: php(api) = 20100412-x86-64 for package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 --> Finished Dependency Resolution Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-jsonc-1.3.2-2.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(zend-abi) = 20100525-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(zend-abi) = 20121212-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(zend-abi) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(zend-abi) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(zend-abi) = 20100525-x86-64 Error: Package: php-pecl-mongo-1.4.4-1.el6.remi.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Error: Package: php-pecl-sqlite-2.0.0-0.4.svn332053.el6.remi.5.4.x86_64 (remi) Requires: php(api) = 20100412-x86-64 Installed: php-common-5.5.4-1.el6.remi.x86_64 (@remi-test) php(api) = 20121113-64 Available: php-common-5.3.3-22.el6.x86_64 (base) php(api) = 20090626 Available: php-common-5.3.3-23.el6_4.x86_64 (updates) php(api) = 20090626 Available: php-common-5.4.21-1.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 Available: php-common-5.4.21-2.el6.remi.x86_64 (remi) php(api) = 20100412-x86-64 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Any idea how to solve these errors? Am I missing a package? or is this a bug?

    Read the article

< Previous Page | 829 830 831 832 833 834 835 836 837 838  | Next Page >