Search Results

Search found 22104 results on 885 pages for 'programming language'.

Page 847/885 | < Previous Page | 843 844 845 846 847 848 849 850 851 852 853 854  | Next Page >

  • The Data Scientist

    - by BuckWoody
    A new term - well, perhaps not that new - has come up and I’m actually very excited about it. The term is Data Scientist, and since it’s new, it’s fairly undefined. I’ll explain what I think it means, and why I’m excited about it. In general, I’ve found the term deals at its most basic with analyzing data. Of course, we all do that, and the term itself in that definition is redundant. There is no science that I know of that does not work with analyzing lots of data. But the term seems to refer to more than the common practices of looking at data visually, putting it in a spreadsheet or report, or even using simple coding to examine data sets. The term Data Scientist (as far as I can make out this early in it’s use) is someone who has a strong understanding of data sources, relevance (statistical and otherwise) and processing methods as well as front-end displays of large sets of complicated data. Some - but not all - Business Intelligence professionals have these skills. In other cases, senior developers, database architects or others fill these needs, but in my experience, many lack the strong mathematical skills needed to make these choices properly. I’ve divided the knowledge base for someone that would wear this title into three large segments. It remains to be seen if a given Data Scientist would be responsible for knowing all these areas or would specialize. There are pretty high requirements on the math side, specifically in graduate-degree level statistics, but in my experience a company will only have a few of these folks, so they are expected to know quite a bit in each of these areas. Persistence The first area is finding, cleaning and storing the data. In some cases, no cleaning is done prior to storage - it’s just identified and the cleansing is done in a later step. This area is where the professional would be able to tell if a particular data set should be stored in a Relational Database Management System (RDBMS), across a set of key/value pair storage (NoSQL) or in a file system like HDFS (part of the Hadoop landscape) or other methods. Or do you examine the stream of data without storing it in another system at all? This is an important decision - it’s a foundation choice that deals not only with a lot of expense of purchasing systems or even using Cloud Computing (PaaS, SaaS or IaaS) to source it, but also the skillsets and other resources needed to care and feed the system for a long time. The Data Scientist sets something into motion that will probably outlast his or her career at a company or organization. Often these choices are made by senior developers, database administrators or architects in a company. But sometimes each of these has a certain bias towards making a decision one way or another. The Data Scientist would examine these choices in light of the data itself, starting perhaps even before the business requirements are created. The business may not even be aware of all the strategic and tactical data sources that they have access to. Processing Once the decision is made to store the data, the next set of decisions are based around how to process the data. An RDBMS scales well to a certain level, and provides a high degree of ACID compliance as well as offering a well-known set-based language to work with this data. In other cases, scale should be spread among multiple nodes (as in the case of Hadoop landscapes or NoSQL offerings) or even across a Cloud provider like Windows Azure Table Storage. In fact, in many cases - most of the ones I’m dealing with lately - the data should be split among multiple types of processing environments. This is a newer idea. Many data professionals simply pick a methodology (RDBMS with Star Schemas, NoSQL, etc.) and put all data there, regardless of its shape, processing needs and so on. A Data Scientist is familiar not only with the various processing methods, but how they work, so that they can choose the right one for a given need. This is a huge time commitment, hence the need for a dedicated title like this one. Presentation This is where the need for a Data Scientist is most often already being filled, sometimes with more or less success. The latest Business Intelligence systems are quite good at allowing you to create amazing graphics - but it’s the data behind the graphics that are the most important component of truly effective displays. This is where the mathematics requirement of the Data Scientist title is the most unforgiving. In fact, someone without a good foundation in statistics is not a good candidate for creating reports. Even a basic level of statistics can be dangerous. Anyone who works in analyzing data will tell you that there are multiple errors possible when data just seems right - and basic statistics bears out that you’re on the right track - that are only solvable when you understanding why the statistical formula works the way it does. And there are lots of ways of presenting data. Sometimes all you need is a “yes” or “no” answer that can only come after heavy analysis work. In that case, a simple e-mail might be all the reporting you need. In others, complex relationships and multiple components require a deep understanding of the various graphical methods of presenting data. Knowing which kind of chart, color, graphic or shape conveys a particular datum best is essential knowledge for the Data Scientist. Why I’m excited I love this area of study. I like math, stats, and computing technologies, but it goes beyond that. I love what data can do - how it can help an organization. I’ve been fortunate enough in my professional career these past two decades to work with lots of folks who perform this role at companies from aerospace to medical firms, from manufacturing to retail. Interestingly, the size of the company really isn’t germane here. I worked with one very small bio-tech (cryogenics) company that worked deeply with analysis of complex interrelated data. So  watch this space. No, I’m not leaving Azure or distributed computing or Microsoft. In fact, I think I’m perfectly situated to investigate this role further. We have a huge set of tools, from RDBMS to Hadoop to allow me to explore. And I’m happy to share what I learn along the way.

    Read the article

  • SQL SERVER – Thinking about Deprecated, Discontinued Features and Breaking Changes while Upgrading to SQL Server 2012 – Guest Post by Nakul Vachhrajani

    - by pinaldave
    Nakul Vachhrajani is a Technical Specialist and systems development professional with iGATE having a total IT experience of more than 7 years. Nakul is an active blogger with BeyondRelational.com (150+ blogs), and can also be found on forums at SQLServerCentral and BeyondRelational.com. Nakul has also been a guest columnist for SQLAuthority.com and SQLServerCentral.com. Nakul presented a webcast on the “Underappreciated Features of Microsoft SQL Server” at the Microsoft Virtual Tech Days Exclusive Webcast series (May 02-06, 2011) on May 06, 2011. He is also the author of a research paper on Database upgrade methodologies, which was published in a CSI journal, published nationwide. In addition to his passion about SQL Server, Nakul also contributes to the academia out of personal interest. He visits various colleges and universities as an external faculty to judge project activities being carried out by the students. Disclaimer: The opinions expressed herein are his own personal opinions and do not represent his employer’s view in anyway. Blog | LinkedIn | Twitter | Google+ Let us hear the thoughts of Nakul in first person - Those who have been following my blogs would be aware that I am recently running a series on the database engine features that have been deprecated in Microsoft SQL Server 2012. Based on the response that I have received, I was quite surprised to know that most of the audience found these to be breaking changes, when in fact, they were not! It was then that I decided to write a little piece on how to plan your database upgrade such that it works with the next version of Microsoft SQL Server. Please note that the recommendations made in this article are high-level markers and are intended to help you think over the specific steps that you would need to take to upgrade your database. Refer the documentation – Understand the terms Change is the only constant in this world. Therefore, whenever customer requirements, newer architectures and designs require software vendors to make a change to the keywords, functions, etc; they ensure that they provide their end users sufficient time to migrate over to the new standards before dropping off the old ones. Microsoft does that too with it’s Microsoft SQL Server product. Whenever a new SQL Server release is announced, it comes with a list of the following features: Breaking changes These are changes that would break your currently running applications, scripts or functionalities that are based on earlier version of Microsoft SQL Server These are mostly features whose behavior has been changed keeping in mind the newer architectures and designs Lesson: These are the changes that you need to be most worried about! Discontinued features These features are no longer available in the associated version of Microsoft SQL Server These features used to be “deprecated” in the prior release Lesson: Without these changes, your database would not be compliant/may not work with the version of Microsoft SQL Server under consideration Deprecated features These features are those that are still available in the current version of Microsoft SQL Server, but are scheduled for removal in a future version. These may be removed in either the next version or any other future version of Microsoft SQL Server The features listed for deprecation will compose the list of discontinued features in the next version of SQL Server Lesson: Plan to make necessary changes required to remove/replace usage of the deprecated features with the latest recommended replacements Once a feature appears on the list, it moves from bottom to the top, i.e. it is first marked as “Deprecated” and then “Discontinued”. We know of “Breaking change” comes later on in the product life cycle. What this means is that if you want to know what features would not work with SQL Server 2012 (and you are currently using SQL Server 2008 R2), you need to refer the list of breaking changes and discontinued features in SQL Server 2012. Use the tools! There are a lot of tools and technologies around us, but it is rarely that I find teams using these tools religiously and to the best of their potential. Below are the top two tools, from Microsoft, that I use every time I plan a database upgrade. The SQL Server Upgrade Advisor Ever since SQL Server 2005 was announced, Microsoft provides a small, very light-weight tool called the “SQL Server upgrade advisor”. The upgrade advisor analyzes installed components from earlier versions of SQL Server, and then generates a report that identifies issues to fix either before or after you upgrade. The analysis examines objects that can be accessed, such as scripts, stored procedures, triggers, and trace files. Upgrade Advisor cannot analyze desktop applications or encrypted stored procedures. Refer the links towards the end of the post to know how to get the Upgrade Advisor. The SQL Server Profiler Another great tool that you can use is the one most SQL Server developers & administrators use often – the SQL Server profiler. SQL Server Profiler provides functionality to monitor the “Deprecation” event, which contains: Deprecation announcement – equivalent to features to be deprecated in a future release of SQL Server Deprecation final support – equivalent to features to be deprecated in the next release of SQL Server You can learn more using the links towards the end of the post. A basic checklist There are a lot of finer points that need to be taken care of when upgrading your database. But, it would be worth-while to identify a few basic steps in order to make your database compliant with the next version of SQL Server: Monitor the current application workload (on a test bed) via the Profiler in order to identify usage of features marked as Deprecated If none appear, you are all set! (This almost never happens) Note down all the offending queries and feature usages Run analysis sessions using the SQL Server upgrade advisor on your database Based on the inputs from the analysis report and Profiler trace sessions, Incorporate solutions for the breaking changes first Next, incorporate solutions for the discontinued features Revisit and document the upgrade strategy for your deployment scenarios Revisit the fall-back, i.e. rollback strategies in case the upgrades fail Because some programming changes are dependent upon the SQL server version, this may need to be done in consultation with the development teams Before any other enhancements are incorporated by the development team, send out the database changes into QA QA strategy should involve a comparison between an environment running the old version of SQL Server against the new one Because minimal application changes have gone in (essential changes for SQL Server version compliance only), this would be possible As an ongoing activity, keep incorporating changes recommended as per the deprecated features list As a DBA, update your coding standards to ensure that the developers are using ANSI compliant code – this code will require a change only if the ANSI standard changes Remember this: Change management is a continuous process. Keep revisiting the product release notes and incorporate recommended changes to stay prepared for the next release of SQL Server. May the power of SQL Server be with you! Links Referenced in this post Breaking changes in SQL Server 2012: Link Discontinued features in SQL Server 2012: Link Get the upgrade advisor from the Microsoft Download Center at: Link Upgrade Advisor page on MSDN: Link Profiler: Review T-SQL code to identify objects no longer supported by Microsoft: Link Upgrading to SQL Server 2012 by Vinod Kumar: Link Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Upgrade

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #052

    - by Pinal Dave
    Let us continue with the final episode of the Memory Lane Series. Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Set Server Level FILLFACTOR Using T-SQL Script Specifies a percentage that indicates how full the Database Engine should make the leaf level of each index page during index creation or alteration. fillfactor must be an integer value from 1 to 100. The default is 0. Limitation of Online Index Rebuld Operation Online operation means when online operations are happening in the database are in normal operational condition, the processes which are participating in online operations does not require exclusive access to the database. Get Permissions of My Username / Userlogin on Server / Database A few days ago, I was invited to one of the largest database company. I was asked to review database schema and propose changes to it. There was special username or user logic was created for me, so I can review their database. I was very much interested to know what kind of permissions I was assigned per server level and database level. I did not feel like asking Sr. DBA the question about permissions. Simple Example of WHILE Loop With CONTINUE and BREAK Keywords This question is one of those questions which is very simple and most of the users get it correct, however few users find it confusing for the first time. I have tried to explain the usage of simple WHILE loop in the first example. BREAK keyword will exit the stop the while loop and control is moved to the next statement after the while loop. CONTINUE keyword skips all the statement after its execution and control is sent to the first statement of while loop. Forced Parameterization and Simple Parameterization – T-SQL and SSMS When the PARAMETERIZATION option is set to FORCED, any literal value that appears in a SELECT, INSERT, UPDATE or DELETE statement is converted to a parameter during query compilation. When the PARAMETERIZATION database option is SET to SIMPLE, the SQL Server query optimizer may choose to parameterize the queries. 2008 Transaction and Local Variables – Swap Variables – Update All At Once Concept Summary : Transaction have no effect over memory variables. When UPDATE statement is applied over any table (physical or memory) all the updates are applied at one time together when the statement is committed. First of all I suggest that you read the article listed above about the effect of transaction on local variant. As seen there local variables are independent of any transaction effect. Simulate INNER JOIN using LEFT JOIN statement – Performance Analysis Just a day ago, while I was working with JOINs I find one interesting observation, which has prompted me to create following example. Before we continue further let me make very clear that INNER JOIN should be used where it cannot be used and simulating INNER JOIN using any other JOINs will degrade the performance. If there are scopes to convert any OUTER JOIN to INNER JOIN it should be done with priority. 2009 Introduction to Business Intelligence – Important Terms & Definitions Business intelligence (BI) is a broad category of application programs and technologies for gathering, storing, analyzing, and providing access to data from various data sources, thus providing enterprise users with reliable and timely information and analysis for improved decision making. Difference Between Candidate Keys and Primary Key Candidate Key – A Candidate Key can be any column or a combination of columns that can qualify as unique key in database. There can be multiple Candidate Keys in one table. Each Candidate Key can qualify as Primary Key. Primary Key – A Primary Key is a column or a combination of columns that uniquely identify a record. Only one Candidate Key can be Primary Key. 2010 Taking Multiple Backup of Database in Single Command – Mirrored Database Backup I recently had a very interesting experience. In one of my recent consultancy works, I was told by our client that they are going to take the backup of the database and will also a copy of it at the same time. I expressed that it was surely possible if they were going to use a mirror command. In addition, they told me that whenever they take two copies of the database, the size of the database, is always reduced. Now this was something not clear to me, I said it was not possible and so I asked them to show me the script. Corrupted Backup File and Unsuccessful Restore The CTO, who was also present at the location, got very upset with this situation. He then asked when the last successful restore test was done. As expected, the answer was NEVER.There were no successful restore tests done before. During that time, I was present and I could clearly see the stress, confusion, carelessness and anger around me. I did not appreciate the feeling and I was pretty sure that no one in there wanted the atmosphere like me. 2011 TRACEWRITE – Wait Type – Wait Related to Buffer and Resolution SQL Trace is a SQL Server database engine technology which monitors specific events generated when various actions occur in the database engine. When any event is fired it goes through various stages as well various routes. One of the routes is Trace I/O Provider, which sends data to its final destination either as a file or rowset. DATEDIFF – Accuracy of Various Dateparts If you want to have accuracy in seconds, you need to use a different approach. In the first example, the accurate method is to find the number of seconds first and then divide it by 60 to convert it in minutes. Dedicated Access Control for SQL Server Express Edition http://www.youtube.com/watch?v=1k00z82u4OI Book Signing at SQLPASS 2012 Who I Am And How I Got Here – True Story as Blog Post If there was a shortcut to success – I want to know. I learnt SQL Server hard way and I am still learning. There are so many things, I have to learn. There is not enough time to learn everything which we want to learn. I am constantly working on it every day. I welcome you to join my journey as well. Please join me in my journey to learn SQL Server – more the merrier. Vacation, Travel and Study – A New Concept Even those who have advanced degrees and went to college for years, or even decades, find studying hard.  There is a difference between studying for a career and studying for a certification.  At least to get a degree there is a variety of subjects, with labs, exams, and practice problems to make things more interesting. Order By Numeric Values Formatted as String We have a table which has a column containing alphanumeric data. The data always has first as an integer and later part as a string. The business need is to order the data based on the first part of the alphanumeric data which is an integer. Now the problem is that no matter how we use ORDER BY the result is not produced as expected. Let us understand this with an example. Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are a DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. http://www.youtube.com/watch?v=1k00z82u4OI Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Windows Azure Virtual Machine Readiness and Capacity Assessment for SQL Server

    - by SQLOS Team
    Windows Azure Virtual Machine Readiness and Capacity Assessment for Windows Server Machine Running SQL Server With the release of MAP Toolkit 8.0 Beta, we have added a new scenario to assess your Windows Azure Virtual Machine Readiness. The MAP 8.0 Beta performs a comprehensive assessment of Windows Servers running SQL Server to determine you level of readiness to migrate an on-premise physical or virtual machine to Windows Azure Virtual Machines. The MAP Toolkit then offers suggested changes to prepare the machines for migration, such as upgrading the operating system or SQL Server. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Now, let’s walk through the MAP Toolkit task for completing the Windows Azure Virtual Machine assessment and capacity planning. The tasks include the following: Perform an inventory View the Windows Azure VM Readiness results and report Collect performance data for determine VM sizing View the Windows Azure Capacity results and report Perform an inventory: 1. To perform an inventory against a single machine or across a complete environment, choose Perform an Inventory to launch the Inventory and Assessment Wizard as shown below: 2. After the Inventory and Assessment Wizard launches, select either the Windows computers or SQL Server scenario to inventory Windows machines. HINT: If you don’t care about completely inventorying a machine, just select the SQL Server scenario. Click Next to Continue. 3. On the Discovery Methods page, select how you want to discover computers and then click Next to continue. Description of Discovery Methods: Use Active Directory Domain Services -- This method allows you to query a domain controller via the Lightweight Directory Access Protocol (LDAP) and select computers in all or specific domains, containers, or OUs. Use this method if all computers and devices are in AD DS. Windows networking protocols --  This method uses the WIN32 LAN Manager application programming interfaces to query the Computer Browser service for computers in workgroups and Windows NT 4.0–based domains. If the computers on the network are not joined to an Active Directory domain, use only the Windows networking protocols option to find computers. System Center Configuration Manager (SCCM) -- This method enables you to inventory computers managed by System Center Configuration Manager (SCCM). You need to provide credentials to the System Center Configuration Manager server in order to inventory the managed computers. When you select this option, the MAP Toolkit will query SCCM for a list of computers and then MAP will connect to these computers. Scan an IP address range -- This method allows you to specify the starting address and ending address of an IP address range. The wizard will then scan all IP addresses in the range and inventory only those computers. Note: This option can perform poorly, if many IP addresses aren’t being used within the range. Manually enter computer names and credentials -- Use this method if you want to inventory a small number of specific computers. Import computer names from a files -- Using this method, you can create a text file with a list of computer names that will be inventoried. 4. On the All Computers Credentials page, enter the accounts that have administrator rights to connect to the discovered machines. This does not need to a domain account, but needs to be a local administrator. I have entered my domain account that is an administrator on my local machine. Click Next after one or more accounts have been added. NOTE: The MAP Toolkit primarily uses Windows Management Instrumentation (WMI) to collect hardware, device, and software information from the remote computers. In order for the MAP Toolkit to successfully connect and inventory computers in your environment, you have to configure your machines to inventory through WMI and also allow your firewall to enable remote access through WMI. The MAP Toolkit also requires remote registry access for certain assessments. In addition to enabling WMI, you need accounts with administrative privileges to access desktops and servers in your environment. 5. On the Credentials Order page, select the order in which want the MAP Toolkit to connect to the machine and SQL Server. Generally just accept the defaults and click Next. 6. On the Enter Computers Manually page, click Create to pull up at dialog to enter one or more computer names. 7. On the Summary page confirm your settings and then click Finish. After clicking Finish the inventory process will start, as shown below: Windows Azure Readiness results and report After the inventory progress has completed, you can review the results under the Database scenario. On the tile, you will see the number of Windows Server machine with SQL Server that were analyzed, the number of machines that are ready to move without changes and the number of machines that require further changes. If you click this Azure VM Readiness tile, you will see additional details and can generate the Windows Azure VM Readiness Report. After the report is generated, select View | Saved Reports and Proposals to view the location of the report. Open up WindowsAzureVMReadiness* report in Excel. On the Windows tab, you can see the results of the assessment. This report has a column for the Operating System and SQL Server assessment and provides a recommendation on how to resolve, if there a component is not supported. Collect Performance Data Launch the Performance Wizard to collect performance information for the Windows Server machines that you would like the MAP Toolkit to suggest a Windows Azure VM size for. Windows Azure Capacity results and report After the performance metrics are collected, the Azure VM Capacity title will display the number of Virtual Machine sizes that are suggested for the Windows Server and Linux machines that were analyzed. You can then click on the Azure VM Capacity tile to see the capacity details and generate the Windows Azure VM Capacity Report. Within this report, you can view the performance data that was collected and the Virtual Machine sizes.   MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Useful References: Windows Azure Homepage How to guides for Windows Azure Virtual Machines Provisioning a SQL Server Virtual Machine on Windows Azure Windows Azure Pricing     Peter Saddow Senior Program Manager – MAP Toolkit Team

    Read the article

  • .NET to iOS: From WinForms to the iPad

    - by RobertChipperfield
    One of the great things about working at Red Gate is getting to play with new technology - and right now, that means mobile. A few weeks ago, we decided that a little research into the tablet computing arena was due, and purely from a numbers point of view, that suggested the iPad as a good target device. A quick trip to iPhoneDevCon in San Diego later, and Marine and I came back full of ideas, and with some concept of how iOS development was meant to work. Here's how we went from there to the release of Stacks & Heaps, our geeky take on the classic "Snakes & Ladders" game. Step 1: Buy a Mac I've played with many operating systems in my time: from the original BBC Model B, through DOS, Windows, Linux, and others, but I'd so far managed to avoid buying fruit-flavoured computer hardware! If you want to develop for the iPhone, iPad or iPod Touch, that's the first thing that needs to change. If you've not used OS X before, the first thing you'll realise is that everything is different! In the interests of avoiding a flame war in the comments section, I'll only go so far as to say that a lot of my Windows-flavoured muscle memory no longer worked. If you're in the UK, you'll also realise your keyboard is lacking a # key, and that " and @ are the other way around from normal. The wonderful Ukelele keyboard layout editor restores some sanity here, as long as you don't look at the keyboard when you're typing. I couldn't give up the PC entirely, but a handy application called Synergy comes to the rescue - it lets you share a single keyboard and mouse between multiple machines. There's a few limitations: Alt-Tab always seems to go to the Mac, and Windows 7's UAC dialogs require the local mouse for security reasons, but it gets you a long way at least. Step 2: Register as an Apple Developer You can register as an Apple Developer free of charge, and that lets you download XCode and the iOS SDK. You also get the iPhone / iPad emulator, which is handy, since you'll need to be a paid member before you can deploy your apps to a real device. You can either enroll as an individual, or as a company. They both cost the same ($99/year), but there's a few differences between them. If you register as a company, you can add multiple developers to your team (all for the same $99 - not $99 per developer), and you get to use your company name in the App Store. However, you'll need to send off significantly more documentation to Apple, and I suspect the process takes rather longer than for an individual, where they just need to verify some credit card details. Here's a tip: if you're registering as a company, do so as early as possible. The approval process can take a while to complete, so get the application in in plenty of time. Step 3: Learn to love the square brackets! Objective-C is the language of the iPad. C and C++ are also supported, and if you're doing some serious game development, you'll probably spend most of your time in C++ talking OpenGL, but for forms-based apps, you'll be interacting with a lot of the Objective-C SDK. Like shifting from Ctrl-C to Cmd-C, it feels a little odd at first, with the familiar string.format(.) turning into: NSString *myString = [NSString stringWithFormat:@"Hello world, it's %@", [NSDate date]]; Thankfully XCode's auto-complete is normally passable, if not up to Visual Studio's standards, which coupled with a huge amount of content on Stack Overflow means you'll soon get to grips with the API. You'll need to get used to some terminology changes, though; here's an incomplete approximation: Coming from a .NET background, there's some luxuries you no longer have developing Objective C in XCode: Generics! Remember back in .NET 1.1, when all collections were just objects? Yup, we're back there now. ReSharper. Or, more generally, very much refactoring support. The not-many-keystrokes to rename a class, its file, and al references to it in Visual Studio turns into a much more painful experience in XCode. Garbage collection. This is actually rather less of an issue than you might expect: if you follow the rules, the reference counting provided by Objective C gets you a long way without too much pain. Circular references are their usual problematic self, though. Decent exception handling. You do have exceptions, but they're nowhere near as widely used. Generally, if something goes wrong, you get nil (see translation table above) back. Which brings me on to. Calling a method on a nil object isn't a failure - it just returns nil itself! There's many arguments for and against this, but personally I fall into the "stuff should fail as quickly and explicitly as possible" camp. Less specifically, I found that there's more chance of code failing at runtime rather than getting caught at compile-time: using the @selector(.) syntax to pass a method signature isn't (can't be) checked at compile-time, so the first you know about a typo is a crash when you try and call it. The solution to this is of course lots of great testing, both automated and manual, but I still find comfort in provably correct type safety being enforced in addition to testing. Step 4: Submit to the App Store Assuming you want to distribute to more than a handful of devices, you're going to need to submit your app to the Apple App Store. There's a few gotchas in terms of getting builds signed with the right certificates, and you'll be bouncing around between XCode and iTunes Connect a fair bit, but eventually you get everything checked off the to-do list, and are ready to upload your first binary! With some amount of anticipation, I pressed the Upload button in XCode, ready to release our creation into the world, but was instead greeted by an error informing me my XML file was malformed. Uh. A little Googling later, and it turned out that a simple rename from "Stacks&Heaps.app" to "StacksAndHeaps.app" worked around an XML escaping bug, and we were good to go. The next step is to wait for approval (or otherwise). After a couple of weeks of intensive development, this part is agonising. Did we make it? The Apple jury is still out at the moment, but our fingers are firmly crossed! In the meantime, you can see some screenshots and leave us your email address if you'd like us to get in touch when it does go live at the MobileFoo website. Step 5: Profit! Actually, that wasn't the idea here: Stacks & Heaps is free; there's no adverts, and we're not going to sell all your data either. So why did we do it? We wanted to get an idea of what it's like to move from coding for a desktop environment, to something completely different. We don't know whether in a year's time, the iPad will still be the dominant force, or whether Android will have smoothed out some bugs, tweaked the performance, and polished the UI, but I think it's a fairly sure bet that the tablet form factor is here to stay. We want to meet people who are using it, start chatting to them, and find out about some of the pain they're feeling. What better way to do that than do it ourselves, and get to write a cool game in the process?

    Read the article

  • Resizing text in an HTML 5 page using JQuery

    - by nikolaosk
    This is going to be the ninth post in a series of posts regarding HTML 5. You can find the other posts here, here , here , here, here , here , here and here.In this post I will demonstrate how to implement a very common feature found in websites today, enabling the visitor to increase or decrease the font size of a page. You can use the JQuery code I will write in this post for HTML pages which do not follow the HTML 5 standard. As I said earlier we need to write JavaScript to implement this functionality.I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadIn this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. The HTML markup for the page follows. <!DOCTYPE html><html lang="en">  <head>    <title>HTML 5, CSS3 and JQuery</title>        <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">     <script type="text/javascript" src="jquery-1.8.2.min.js">        </script><script type="text/javascript">$(function() {    $('a').click(function() {        var getfont = $('p').css('font-size');        var mynum = parseFloat(getfont, 10);        var newmwasure = getfont.slice(-2);                $('p').css('font-size', mynum / 1.2 + newmwasure);                if(this.id == 'increase') {            $('p').css('font-size', mynum * 1.4 + newmwasure);        }     })    })</script>       </head>  <body>      <div id="header">      <h1>Learn cutting edge technologies</h1>      <h2>HTML 5, JQuery, CSS3</h2>    </div>    <div id="resize">    <a href="" id="increase">Increase Font</a>       |        <a href="" id="decrease">Decrease Font</a>        </div>        <div id="main">          <h2>HTML 5</h2>                        <article>          <p>            HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML.          </p>          </article>      </div>             </body>  </html>  There is nothing difficult or fancy in the HTML markup above. I have a link to the external JQuery library and the JQuery code is included inside the .html page.I have two links on this page that will increase/decrease the font size of the contents enclosed inside the <p></p> tags.Let me explain what the JQuery code does.When the user clicks on the link, I store in a variable the current font size of the <p> element that I get back from the CSS function. var getfont = $('p').css('font-size'); So now we have the original value. That will return a value like "16px" "1.2em".Then I need to get the unit of measurement (px,em).I use the slice() function. var newmwasure = getfont.slice(-2); Then I want to get only the numeric part of the returning value.I do that using the parseFloat() function.Have a look at the parseFloat() function.Finally with this bit of code I choose a ratio (I am devising a very simple algorithm for increasing and decreasing) and apply it to the <p> element. I still use the CSS function. You can get but also set the font size for a particular element with the CSS function.So I check for the id=increase and if this matches I will increase the font size of the <p> element.If it does not match we will decrease the font size.   $('p').css('font-size', mynum / 1.2 + newmwasure);                if(this.id == 'increase') {            $('p').css('font-size', mynum * 1.4 + newmwasure);  The code for the css file (style.css) followsbody{background-color:#eaeaea;}p{font-size:0.8em;font-family:Tahoma;}#resize{width:200px;background-color:#dadada;}#resize a {text-decoration:none;}The above CSS rules are very easy to understand. Now I save all my work.I view my page on the browser for the first time.Have a look at the picture below Now I increase the font size by clicking the respective linkHave a look at the picture below  Finally I decrease the font size by clicking on the respective linkHave a look at the picture below   Once more we see that the power and simplicity of JQuery library enables us to write less code but accomplish a lot at the same time. Hope it helps!!  

    Read the article

  • CodePlex Daily Summary for Thursday, June 17, 2010

    CodePlex Daily Summary for Thursday, June 17, 2010New ProjectsAstalanumerator: A JavaScript based recursive DOM/JS object inspector. Uses a simple tree menu to enumerate all properties of a object.BDD Log Converter: A simple .NET class and console application that will convert BDD logs (MDT) into XML format.CastleInvestProj: Castle Investigating project Easy Callback: This library facilitates the use of multiple asynchronous calls on the same page, and asynchronous calls from a user control also have a clean cod...Easy Wings: Small webApp to manage aircraft booking in flying club. French only for the moment.EPiServer Template Foundation: EPiServer Template Foundation builds on top of Page Type Builder to provide a framework for common site features such as basic page type properties...guidebook: a project to plan your road trip.Look into documents for e-discovery: Search, browse, tag, annotate documents such as MS Word, PDF, e-mail, etc. Good for legal professionals do e-discovery. One Bus Away for Windows Phone: A Windows Phone 7 application written in Silverlight for the OneBusAway (www.onebusaway.org) website. Allows mobile users to search for public tra...OneBusAway for Windows Phone 7: OneBusAway is a service with transit information for the Seattle, WA region. We are creating a mobile application for Windows Phone 7 utilizing th...PoFabLab - Poetry Generation Library and Editor in .NET: PoFabLab is an open source library and word processor designed for digital poets. The library can scan lines, perform Markov analysis, filter text...Project Axure: More details coming soon.Чат кутежа 2.0: ИРЦ чат специально для форума ЕНЕ简易代码生成器: 初次使用CodePlex,这只是一个测试项目。打算用WPF做一个简单的代码生成器,兼具SQL Server Client功能。使用.Net 4.0, C#开发。运营工作系统: TRAS(Team resource assist system) is a toolkit that help the studio to manage and distribute the daily work, like publish the news, GM broadcast a...New ReleasesAmuse - A New MU* Client For Windows: 2010 June: Important Notice to TestersPlease uninstall any previous versions of Amuse prior to this one before installing. Changes and InformationFirst relea...ASP.NET Generic Data Source Control: V1.0: GenericDataSource - Version 1.0Binary This is the first official binary release of the GenericDataSource for ASP.NET - stable and ready for product...Astalanumerator: Astalanumerator 0.7: I wanted to map all properties in javascript and inspect them regardless if they were objects or not. IE doesn’t support for(i in..) for native pro...BDD Log Converter: BDD Log Converter 0.1.0: First release (0.1.0).DVD Swarm: 0.8.10.616: Major update with improvements to encoding speed.Easy Callback: Easy Callback 1.0.0.0: Easy Callback library 1.0.0.0Facebook Connect Authentication for ASP.NET: Facebook Connect Authentication for ASP.NET - v1.0: Now supporting Facebook's new Open Graph API JavaScript SDK, this release of FBConnectAuth also adds support for running in partially trusted envir...FlickrNet API Library: 3.0 Beta 3: Another small Beta. Changed parsing code so exceptions aren't raised when new attributes are added by Flickr. This affects searches where you are ...Infragistics Analytics Framework: Infragistics Analytics Framework 10.2: An updated version of Infragistics Analytics Framework, which utilizes the newest version (v.1.4.4) of MSAF as well as the newest release (v.10.2) ...NUnit Add-in for Growl Notifications: NUnit Add-in for Growl Notifications 1.0 build 1: Version 1.0 build 1:[change] Test run failure notification now disappears automaticallyOpen Source PLM Activities: 3dxml player integration for Aras Innovator: This is just a simple html file you need to add to your Aras Innovator install directory. It loads the 3Dxml player for your 3dxml files. Tested o...patterns & practices - Windows Azure Guidance: WAAG - Part 2 - Drop 1: First code and docs drop for Part 2 of the Windows Azure Architecture Guide Part 1 of the Guide is released here. Highlights of this release are:...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (June 2010): Installer of the latest binaries of Phalanger 2.0 (June 2010) and its integration into Visual Studio 2008 SP1. * Improved compatibility with P...RIA Services Essentials: Book Club Application (June 16, 2010): Added some XAML to hide/show link to BookShelf page based on whether the user is logged in or not. Updated IsBookOwner authorization rule implement...secs4net: Relase 1.01: version 1.01 releasesELedit: sELedit v1.1c: Added: Tool for exporting NPC/Mob database file that is used by sNPCeditSharePoint Ad Rotator: SPAdRotator 2.0 Beta 2: Added: Open tool pane link to default Web Part text Made all images except the first hidden by default, so the Web Part will degrade gracefully w...sMAPtool: sMAPtool v0.7f (without Maps): Added: 3rd party magnifier softwaresNPCedit: sNPCedit v0.9c: Added: npc/mob names and corresponding datbaseSolidWorks Addin Development: GenericAddinFrameworkR1-06.17.2010: .sTASKedit: sTASKedit v0.8: Important BugFix: there was an mistake in the structure, team-member block and get-items block was swapped internally. Tasks that contains both blo...stefvanhooijdonk.com: UnitTesting-SP2010-TFS2010: Files for my post on TFS2010 and NUnit testing with SP2010 projects. see the post here: http://wp.me/pMnlQ-88 The XSLT here is from http://nunit4t...Telerik CAB Enabling Kit for RadControls for WinForms: TCEK 2010.1.10.504: What's new in v2010.1.0610 (Beta): RadDocking component has been replaced with the latest RadDock control Requirements: Visual Studio 2005+ Tele...TFS Buddy: TFS Buddy 1.2: Fixes a problem with notificationsThales Simulator Library: Version 0.9: The Thales Simulator Library is an implementation of a software emulation of the Thales (formerly Zaxus & Racal) Hardware Security Module cryptogra...Triton Application Framework: Tools - Code Generator - Build 1.0: This is the first release of the Generator. This is buggy but works.VCC: Latest build, v2.1.30616.0: Automatic drop of latest buildXsltDb - DotNetNuke Module Builder: 01.01.27: Code completion for XsltDb, HTML and XSL stuff!! Full screen editing Some bugs are still in EditArea component and object lists in code completi...Чат кутежа 2.0: 0.9a build 2 версия: вторая сборка первой альфа-версии ирц-клиента.Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesASP.NETMost Active ProjectsdotSpatialpatterns & practices: Enterprise Library Contribpatterns & practices – Enterprise LibraryBlogEngine.NETLightweight Fluent WorkflowRhyduino - Arduino and Managed CodeSunlit World SchemeNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSolidWorks Addin DevelopmentN2 CMS

    Read the article

  • CodePlex Daily Summary for Monday, May 17, 2010

    CodePlex Daily Summary for Monday, May 17, 2010New Projects.NET Essentials Course: .NET Essentials course @ Telerik Academy Training project for the studentsAU/NZ Office 2010 Launch Demos: The AU/NZ Office 2010 Launch Demos are a collection of code samples that were used as part of the Office/SharePoint 2010 launch parties in Australi...CybennyCMS: Very simple CMS system for building sites with ASP.NET with templates for lay-out, content pages with only html content and a xml file for the site...essionPIM: essionPIMGIStance: A library for finding "nearest neighbor" among an in-memory set of positions, in C# and F#. A radius must be specified for making a meaningful s...IP Informer: IP Informer is IP Informer.Kurumsal Ofis Paketi: Kurumsal Ofis Paketi (KOP), Microsoft Ofis 2010 ürünleri için geliştirilmiş eklenti yazılımıdır. KOP, Word ve Excel’de bulunan işlevlerinin genişle...Mockup to XAML: Convert Balsamiq Mockups to XAML. This project supports BMML mockup control conversion using plugins. A standard set of controls are included wit...Open XML Validator: This WPF app give you a brief resume about errors in your Open XML documents.Paint.NET Bulk Image Processor: PDNBulkUpdater is a plug-in for Paint.NET that allows you to efficiently perform operations such as resizing and converting multiple images at the ...PiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统Roleplay character generator: The roleplay character generator allows the creation of characters for different roleplaying gamesSharePoint User Search WebParts: This project contains SharePoint webparts which provide advanced search configuration and experience for SharePoint 2007. It will be upgrade in few...Spodi: Spodi is created on 22-04-2010TfsPolicyPack: This project will provide a few checkin policies for VS 2010.vccodesandobx: vccodesandobxvccodesandobxvccodesandobxWhiteNile: test project using codeplexNew ReleasesAnimeStore.Net: 1.0.3.0: Build 1.0.3.0 Changes Move some functionality to features (MEF) Filter / Search functionality. Anime hard-copy records storage (e.g Disk Storage ...AU/NZ Office 2010 Launch Demos: Twitter map web part: This is the main twitter map web part download, see the Twitter Map web part page for all the information.Blueset Studio Opensource Projects: 推来: 稳定版本BUtil: BUtil 5.0 Alpha2: The initial implementation of multitasking (except ghost)CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 and 4.0.1 beta: Beta 2 is released here: url http://cassinidev.codeplex.com/releases/view/45456 New in CassiniDev v3.5.1.0/v4.0.1.0 Added .Net 4 / VS10 build. ...CBM-Command: 2010-05-16: Release Notes - 2010-05-16New Features New navigation options: Page Up, Page Down, Top of Directory, Bottom of Directory. See documentation (http:...CCNet Conditional Plugin: CCNet Conditional for CCNet 1.5: A (quick) build of the plugin for CCNet 1.5 to fix the 17365 bug reported by Beakster. This also adds a new condition "timeCondition"CybennyCMS: Cybenny CMS beta 1: The first beta. Includes a small demo site.Data Extracting SDK: Data Extracting SDK v.1.1 RTM: RTM version of Data Extracting SDK.Duckworth Lewis Professional Edition Calculator: DLcalc 2.0: This software can perform all D/L calculations 100% accurately. From version 2.0 onwards, tables for par scores can also be produced.EPiServer CMS Page Type Builder: Page Type Builder 1.2: Release notes can be found in this blog post.Floe IRC Client: Floe IRC Client 2010-05 R5: - Many new context menu options for @s - Ability to select multiple users in the nick list for some operations (kick, ban) - Bunch of minor bug fix...Graffiti CMS Events Plugin: Version 1.0.1: Minor update to previous version to fix bug where deleted posts were still showing in the calendar.Microsoft Research Boogie: 2010-05-16: Binary release of Boogie and Dafny. (Note, Chalice is not pre-built as part of this binary release. To obtain it, you need to build it yourself f...MSBuild Launch Pad (mPad): 1.0 Beta 2: Basic support for sln, csproj, vbproj, vcxproj, shfbproj, ccproj, oxygene and proj files are added. Basic settings (Show Prompt, and Auto Hide) are...Multi-Language Words Memorizer: Memorizer 1.1: Issues fix, XML db update with new words.NShader - HLSL - GLSL - CG - Shader Syntax Highlighter AddIn for Visual Studio: NShader 1.1: New release of NShader! New : - a Visual Studio 2010 port can be installed through the new extension manager : you just have to download NShaderV...PHPExcel: PHPExcel 1.7.3 Production: Want to contribute?Please refer the Contribute page. DonationsDonate via PayPal. If you want to, we can also add your name / company on our Donati...Rollback - A social backup tool.: Rollback Setup 0.5.1.2 Build 48360: Bug fixes for backing up files which are hidden/system. Changes to make builds on 64 bit Windows 7 using VS 2010 Express edition.Rollback - A social backup tool.: Rollback Setup 0.5.1.3: Updated version number.Shake - C# Make: Shake v0.1.20: New: Simple console logger Changes: Command line params helper writes out syntax and samples (like msbuild) Fixes: Assembly info, file task and r...SharePoint User Search WebParts: v0.1 Friendly MOSS 2007 Search WebPart: Very first version of this webpart. A more stabilized version will follow in few days.Team Deploy: Team Deploy 2010 Beta 1: This is the initial release for Team Deploy 2010 for TFS Team Build 2010. All features from Team Build 2.x are functional in this version. Comp...Team Foundation Server Administration Tool: 2.0: TFS Administration Tool 2.0 TFS Administration Tool 2.0 is built on top of the Team Foundation Server 2008 object model and in order to connect to...The Ping Master: v0.9.0.0: Installer for The Ping Master binariesUseful Office Macros: All Macro Downloads: Please find above the downloads related to this project. Each Excel Workbook below works independently of the others, so you only need to download...VCC: Latest build, v2.1.30516.0: Automatic drop of latest buildVisual Studio DSite: Advanced Digital Board Game (Visual C++ 2008): An advanced digital board game made in visual c 2008.YUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool Full Version: Version 1.0 The following changes have been made: Merged classes to automatically sense if the target file is Javascript or CSS. Cleaned up setu...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryPHPExcelBlogEngine.NETRawrMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersDotNetZip LibraryCaliburn: An Application Framework for WPF and SilverlightSQL Server PowerShell Extensions

    Read the article

  • CodePlex Daily Summary for Sunday, June 01, 2014

    CodePlex Daily Summary for Sunday, June 01, 2014Popular ReleasesSandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Fancontroller: Fancontroller: Initial releaseVi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsCet MicroWPF: WPF-like library for simple graphic-UI application using Netduino (Plus) 2 and the FTDI FT800 Eve board.Fakemons: Some Fakmons, powered by XML, XSLT, CSS and JavascriptFling OS: Fling OS is a C# operating system project aiming to create a new, managed operating system from the ground up.MudRoom: Experimental tool sets in mud parsing and area definitionOOP-2112110158: My name's NgocDungRoslynResearch: Roslyn ResearchTHD - Control de Usuarios: control de usuarios y permisosWPF Kinect User Controls: WPF Kinect User Control project provide simple Tilt and Skeleton Tracking Parameter Controls.

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #032

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Complete Series of Database Coding Standards and Guidelines SQL SERVER Database Coding Standards and Guidelines – Introduction SQL SERVER – Database Coding Standards and Guidelines – Part 1 SQL SERVER – Database Coding Standards and Guidelines – Part 2 SQL SERVER Database Coding Standards and Guidelines Complete List Download Explanation and Example – SELF JOIN When all of the data you require is contained within a single table, but data needed to extract is related to each other in the table itself. Examples of this type of data relate to Employee information, where the table may have both an Employee’s ID number for each record and also a field that displays the ID number of an Employee’s supervisor or manager. To retrieve the data tables are required to relate/join to itself. Insert Multiple Records Using One Insert Statement – Use of UNION ALL This is very interesting question I have received from new developer. How can I insert multiple values in table using only one insert? Now this is interesting question. When there are multiple records are to be inserted in the table following is the common way using T-SQL. Function to Display Current Week Date and Day – Weekly Calendar Straight blog post with script to find current week date and day based on the parameters passed in the function.  2008 In my beginning years, I have almost same confusion as many of the developer had in their earlier years. Here are two of the interesting question which I have attempted to answer in my early year. Even if you are experienced developer may be you will still like to read following two questions: Order Of Column In Index Order of Conditions in WHERE Clauses Example of DISTINCT in Aggregate Functions Have you ever used DISTINCT with the Aggregation Function? Here is a simple example about how users can do it. Create a Comma Delimited List Using SELECT Clause From Table Column Straight to script example where I explained how to do something easy and quickly. Compound Assignment Operators SQL SERVER 2008 has introduced new concept of Compound Assignment Operators. Compound Assignment Operators are available in many other programming languages for quite some time. Compound Assignment Operators is operator where variables are operated upon and assigned on the same line. PIVOT and UNPIVOT Table Examples Here is a very interesting question – the answer to the question can be YES or NO both. “If we PIVOT any table and UNPIVOT that table do we get our original table?” Read the blog post to get the explanation of the question above. 2009 What is Interim Table – Simple Definition of Interim Table The interim table is a table that is generated by joining two tables and not the final result table. In other words, when two tables are joined they create an interim table as resultset but the resultset is not final yet. It may be possible that more tables are about to join on the interim table, and more operations are still to be applied on that table (e.g. Order By, Having etc). Besides, it may be possible that there is no interim table; sometimes final table is what is generated when the query is run. 2010 Stored Procedure and Transactions If Stored Procedure is transactional then, it should roll back complete transactions when it encounters any errors. Well, that does not happen in this case, which proves that Stored Procedure does not only provide just the transactional feature to a batch of T-SQL. Generate Database Script for SQL Azure When talking about SQL Azure the most common complaint I hear is that the script generated from stand-along SQL Server database is not compatible with SQL Azure. This was true for some time for sure but not any more. If you have SQL Server 2008 R2 installed you can follow the guideline below to generate a script which is compatible with SQL Azure. Convert IN to EXISTS – Performance Talk It is NOT necessary that every time when IN is replaced by EXISTS it gives better performance. However, in our case listed above it does for sure give better performance. You can read about this subject in the associated blog post. Subquery or Join – Various Options – SQL Server Engine Knows the Best Every single time whenever there is a performance tuning exercise, I hear the conversation from developer where some prefer subquery and some prefer join. In this two part blog post, I explain the same in the detail with examples. Part 1 | Part 2 Merge Operations – Insert, Update, Delete in Single Execution MERGE is a new feature that provides an efficient way to do multiple DML operations. In earlier versions of SQL Server, we had to write separate statements to INSERT, UPDATE, or DELETE data based on certain conditions; however, at present, by using the MERGE statement, we can include the logic of such data changes in one statement that even checks when the data is matched and then just update it, and similarly, when the data is unmatched, it is inserted. 2011 Puzzle – Statistics are not updated but are Created Once Here is the quick scenario about my setup. Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated – WHY? Question to You – When to use Function and When to use Stored Procedure Personally, I believe that they are both different things - they cannot be compared. I can say, it will be like comparing apples and oranges. Each has its own unique use. However, they can be used interchangeably at many times and in real life (i.e., production environment). I have personally seen both of these being used interchangeably many times. This is the precise reason for asking this question. 2012 In year 2012 I had two interesting series ran on the blog. If there is no fun in learning, the learning becomes a burden. For the same reason, I had decided to build a three part quiz around SEQUENCE. The quiz was to identify the next value of the sequence. I encourage all of you to take part in this fun quiz. Guess the Next Value – Puzzle 1 Guess the Next Value – Puzzle 2 Guess the Next Value – Puzzle 3 Guess the Next Value – Puzzle 4 Simple Example to Configure Resource Governor – Introduction to Resource Governor Resource Governor is a feature which can manage SQL Server Workload and System Resource Consumption. We can limit the amount of CPU and memory consumption by limiting /governing /throttling on the SQL Server. If there are different workloads running on SQL Server and each of the workload needs different resources or when workloads are competing for resources with each other and affecting the performance of the whole server resource governor is a very important task. Tricks to Replace SELECT * with Column Names – SQL in Sixty Seconds #017 – Video  Retrieves unnecessary columns and increases network traffic When a new columns are added views needs to be refreshed manually Leads to usage of sub-optimal execution plan Uses clustered index in most of the cases instead of using optimal index It is difficult to debug SQL SERVER – Load Generator – Free Tool From CodePlex The best part of this SQL Server Load Generator is that users can run multiple simultaneous queries again SQL Server using different login account and different application name. The interface of the tool is extremely easy to use and very intuitive as well. A Puzzle – Swap Value of Column Without Case Statement Let us assume there is a single column in the table called Gender. The challenge is to write a single update statement which will flip or swap the value in the column. For example if the value in the gender column is ‘male’ swap it with ‘female’ and if the value is ‘female’ swap it with ‘male’. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Partner Blog Series: PwC Perspectives - "Is It Time for an Upgrade?"

    - by Tanu Sood
    Is your organization debating their next step with regard to Identity Management? While all the stakeholders are well aware that the one-size-fits-all doesn’t apply to identity management, just as true is the fact that no two identity management implementations are alike. Oracle’s recent release of Identity Governance Suite 11g Release 2 has innovative features such as a customizable user interface, shopping cart style request catalog and more. However, only a close look at the use cases can help you determine if and when an upgrade to the latest R2 release makes sense for your organization. This post will describe a few of the situations that PwC has helped our clients work through. “Should I be considering an upgrade?” If your organization has an existing identity management implementation, the questions below are a good start to assessing your current solution to see if you need to begin planning for an upgrade: Does the current solution scale and meet your projected identity management needs? Does the current solution have a customer-friendly user interface? Are you completely meeting your compliance objectives? Are you still using spreadsheets? Does the current solution have the features you need? Is your total cost of ownership in line with well-performing similar sized companies in your industry? Can your organization support your existing Identity solution? Is your current product based solution well positioned to support your organization's tactical and strategic direction? Existing Oracle IDM Customers: Several existing Oracle clients are looking to move to R2 in 2013. If your organization is on Sun Identity Manager (SIM) or Oracle Identity Manager (OIM) and if your current assessment suggests that you need to upgrade, you should strongly consider OIM 11gR2. Oracle provides upgrade paths to Oracle Identity Manager 11gR2 from SIM 7.x / 8.x as well as Oracle Identity Manager 10g / 11gR1. The following are some of the considerations for migration: Check the end of product support (for Sun or legacy OIM) schedule There are several new features available in R2 (including common Helpdesk scenarios, profiling of disconnected applications, increased scalability, custom connectors, browser-based UI configurations, portability of configurations during future upgrades, etc) Cost of ownership (for SIM customers)\ Customizations that need to be maintained during the upgrade Time/Cost to migrate now vs. waiting for next version If you are already on an older version of Oracle Identity Manager and actively maintaining your support contract with Oracle, you might be eligible for a free upgrade to OIM 11gR2. Check with your Oracle sales rep for more details. Existing IDM infrastructure in place: In the past year and half, we have seen a surge in IDM upgrades from non-Oracle infrastructure to Oracle. If your organization is looking to improve the end-user experience related to identity management functions, the shopping cart style access request model and browser based personalization features may come in handy. Additionally, organizations that have a large number of applications that include ecommerce, LDAP stores, databases, UNIX systems, mainframes as well as a high frequency of user identity changes and access requests will value the high scalability of the OIM reconciliation and provisioning engine. Furthermore, we have seen our clients like OIM's out of the box (OOB) support for multiple authoritative sources. For organizations looking to integrate applications that do not have an exposed API, the Generic Technology Connector framework supported by OIM will be helpful in quickly generating custom connector using OOB wizard. Similarly, organizations in need of not only flexible on-boarding of disconnected applications but also strict access management to these applications using approval flows will find the flexible disconnected application profiling feature an extremely useful tool that provides a high degree of time savings. Organizations looking to develop custom connectors for home grown or industry specific applications will likewise find that the Identity Connector Framework support in OIM allows them to build and test a custom connector independently before integrating it with OIM. Lastly, most of our clients considering an upgrade to OIM 11gR2 have also expressed interest in the browser based configuration feature that allows an administrator to quickly customize the user interface without adding any custom code. Better yet, code customizations, if any, made to the product are portable across the future upgrades which, is viewed as a big time and money saver by most of our clients. Below are some upgrade methodologies we adopt based on client priorities and the scale of implementation. For illustration purposes, we have assumed that the client is currently on Oracle Waveset (formerly Sun Identity Manager).   Integrated Deployment: The integrated deployment is typically where a client wants to split the implementation to where their current IDM is continuing to handle the front end workflows and OIM takes over the back office operations incrementally. Once all the back office operations are moved completely to OIM, the front end workflows are migrated to OIM. Parallel Deployment: This deployment is typically done where there can be a distinct line drawn between which functionality the platforms are supporting. For example the current IDM implementation is handling the password reset functionality while OIM takes over the access provisioning and RBAC functions. Cutover Deployment: A cutover deployment is typically recommended where a client has smaller less complex implementations and it makes sense to leverage the migration tools to move them over immediately. What does this mean for YOU? There are many variables to consider when making upgrade decisions. For most customers, there is no ‘easy’ button. Organizations looking to upgrade or considering a new vendor should start by doing a mapping of their requirements with product features. The recommended approach is to take stock of both the short term and long term objectives, understand product features, future roadmap, maturity and level of commitment from the R&D and build the implementation plan accordingly. As we said, in the beginning, there is no one-size-fits-all with Identity Management. So, arm yourself with the knowledge, engage in industry discussions, bring in business stakeholders and start building your implementation roadmap. In the next post we will discuss the best practices on R2 implementations. We will be covering the Do's and Don't's and share our thoughts on making implementations successful. Meet the Writers: Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

    Read the article

  • Does Test Driven Development (TDD) improve Quality and Correctness? (Part 1)

    - by David V. Corbin
    Since the dawn of the computer age, various methodologies have been introduced to improve quality and reduce cost. In this posting, I will by sharing my experiences with Test Driven Development; both its benefits and limitations. To start this topic, we need to agree on what TDD is. The first is to define each of the three words as used in this context. Test - An item or action which measures something in some quantifiable form. Driven - The primary motivation or focus of a series of activities (process) Development - All phases of a software project/product from concept through delivery. The above are very simple definitions that result in the following: "TDD is a process where the primary focus is on measuring and quantifying all aspects of the creation of a (software) product." There are many places where TDD is used outside of software development, even though it is not known by this name. Consider the (conventional) education process that most of us grew up on. The focus was to get the best grades as measured by different tests. Many of these tests measured rote memorization and not understanding of the subject matter. The result of this that many people graduated with high scores but without "quality and correctness" in their ability to utilize the subject matter (of course, the flip side is true where certain people DID understand the material but were not very good at taking this type of test). Returning to software development, let us look at some common scenarios. While these items are generally applicable regardless of platform, language and tools; the remainder of this post will utilize Microsoft Visual Studio and Team Foundation Server (TFS) for examples. It should be realized that everyone does at least some aspect of TDD. At the most rudimentary level, getting a program to compile involves a "pass/fail" measurement (is the syntax valid) that drives their ability to proceed further (run the program). Other developers may create "Unit Tests" in the belief that having a test for every method/property of a class and good code coverage is the goal of TDD. These items may be helpful and even important, but really only address a small aspect of the overall effort. To see TDD in a bigger view, lets identify the various activities that are part of the Software Development LifeCycle. These are going to be presented in a Waterfall style for simplicity, but each item also occurs within Iterative methodologies such as Agile/Scrum. the key ones here are: Requirements Gathering Architecture Design Implementation Quality Assurance Can each of these items be subjected to a process which establishes metrics (quantified metrics) that reflect both the quality and correctness of each item? It should be clear that conventional Unit Tests do not apply to all of these items; at best they can verify that a local aspect (e.g. a Class/Method) of implementation matches the (test writers perspective of) the appropriate design document. So what can we do? For each of area, the goal is to create tests that are quantifiable and durable. The ability to quantify the measurements (beyond a simple pass/fail) is critical to tracking progress(eventually measuring the level of success that has been achieved) and for providing clear information on what items need to be addressed (along with the appropriate time to address them - in varying levels of detail) . Durability is important so that the test can be reapplied (ideally in an automated fashion) over the entire cycle. Returning for a moment back to our "education example", one must also be careful of how the tests are organized and how the measurements are taken. If a test is in a multiple choice format, there is a significant statistical probability that a correct answer might be the result of a random guess. Also, in many situations, having the student simply provide a final answer can obscure many important elements. For example, on a math test, having the student simply provide a numeric answer (rather than showing the methodology) may result in a complete mismatch between the process and the result. It is hard to determine which is worse: The student who makes a simple arithmetric error at one step of a long process (resulting in a wrong answer) or The student who (without providing the "workflow") uses a completely invalid approach, yet still comes up with the right number. The "Wrong Process"/"Right Answer" is probably the single biggest problem in software development. Even very simple items can suffer from this. As an example consider the following code for a "straight line" calculation....Is it correct? (for Integral Points)         int Solve(int m, int b, int x) { return m * x + b; }   Most people would respond "Yes". But let's take the question one step further... Is it correct for all possible values of m,b,x??? (no fair if you cheated by being focused on the bolded text!)  Without additional information regarding constrains on "the possible values of m,b,x" the answer must be NO, there is the risk of overflow/wraparound that will produce an incorrect result! To properly answer this question (i.e. Test the Code), one MUST be able to backtrack from the implementation through the design, and architecture all the way back to the requirements. And the requirement itself must be tested against the stakeholder(s). It is only when the bounding conditions are defined that it is possible to determine if the code is "Correct" and has "Quality". Yet, how many of us (myself included) have written such code without even thinking about it. In many canses we (think we) "know" what the bounds are, and that the code will be correct. As we all know, requirements change, "code reuse" causes implementations to be applied to different scenarios, etc. This leads directly to the types of system failures that plague so many projects. This approach to TDD is much more holistic than ones which start by focusing on the details. The fundamental concepts still apply: Each item should be tested. The test should be defined/implemented before (or concurrent with) the definition/implementation of the actual item. We also add concepts that expand the scope and alter the style by recognizing: There are many things beside "lines of code" that benefit from testing (measuring/evaluating in a formal way) Correctness and Quality can not be solely measured by "correct results" In the future parts, we will examine in greater detail some of the techniques that can be applied to each of these areas....

    Read the article

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • SQL SERVER – Using expressor Composite Types to Enforce Business Rules

    - by pinaldave
    One of the features that distinguish the expressor Data Integration Platform from other products in the data integration space is its concept of composite types, which provide an effective and easily reusable way to clearly define the structure and characteristics of data within your application.  An important feature of the composite type approach is that it allows you to easily adjust the content of a record to its ultimate purpose.  For example, a record used to update a row in a database table is easily defined to include only the minimum set of columns, that is, a value for the key column and values for only those columns that need to be updated. Much like a class in higher level programming languages, you can also use the composite type as a way to enforce business rules onto your data by encapsulating a datum’s name, data type, and constraints (for example, maximum, minimum, or acceptable values) as a single entity, which ensures that your data can not assume an invalid value.  To what extent you use this functionality is a decision you make when designing your application; the expressor design paradigm does not force this approach on you. Let’s take a look at how these features are used.  Suppose you want to create a group of applications that maintain the employee table in your human resources database. Your table might have a structure similar to the HumanResources.Employee table in the AdventureWorks database.  This table includes two columns, EmployeID and rowguid, that are maintained by the relational database management system; you cannot provide values for these columns when inserting new rows into the table. Additionally, there are columns such as VacationHours and SickLeaveHours that you might choose to update for all employees on a monthly basis, which justifies creation of a dedicated application. By creating distinct composite types for the read, insert and update operations against this table, you can more easily manage this table’s content. When developing this application within expressor Studio, your first task is to create a schema artifact for the database table.  This process is completely driven by a wizard, only requiring that you select the desired database schema and table.  The resulting schema artifact defines the mapping of result set records to a record within the expressor data integration application.  The structure of the record within the expressor application is a composite type that is given the default name CompositeType1.  As you can see in the following figure, all columns from the table are included in the result set and mapped to an identically named attribute in the default composite type. If you are developing an application that needs to read this table, perhaps to prepare a year-end report of employees by department, you would probably not be interested in the data in the rowguid and ModifiedDate columns.  A typical approach would be to drop this unwanted data in a downstream operator.  But using an alternative composite type provides a better approach in which the unwanted data never enters your application. While working in expressor  Studio’s schema editor, simply create a second composite type within the same schema artifact, which you could name ReadTable, and remove the attributes corresponding to the unwanted columns. The value of an alternative composite type is even more apparent when you want to insert into or update the table.  In the composite type used to insert rows, remove the attributes corresponding to the EmployeeID primary key and rowguid uniqueidentifier columns since these values are provided by the relational database management system. And to update just the VacationHours and SickLeaveHours columns, use a composite type that includes only the attributes corresponding to the EmployeeID, VacationHours, SickLeaveHours and ModifiedDate columns. By specifying this schema artifact and composite type in a Write Table operator, your upstream application need only deal with the four required attributes and there is no risk of unintentionally overwriting a value in a column that does not need to be updated. Now, what about the option to use the composite type to enforce business rules?  If you review the composition of the default composite type CompositeType1, you will note that the constraints defined for many of the attributes mirror the table column specifications.  For example, the maximum number of characters in the NationaIDNumber, LoginID and Title attributes is equivalent to the maximum width of the target column, and the size of the MaritalStatus and Gender attributes is limited to a single character as required by the table column definition.  If your application code leads to a violation of these constraints, an error will be raised.  The expressor design paradigm then allows you to handle the error in a way suitable for your application.  For example, a string value could be truncated or a numeric value could be rounded. Moreover, you have the option of specifying additional constraints that support business rules unrelated to the table definition. Let’s assume that the only acceptable values for marital status are S, M, and D.  Within the schema editor, double-click on the MaritalStatus attribute to open the Edit Attribute window.  Then click the Allowed Values checkbox and enter the acceptable values into the Constraint Value text box. The schema editor is updated accordingly. There is one more option that the expressor semantic type paradigm supports.  Since the MaritalStatus attribute now clearly specifies how this type of information should be represented (a single character limited to S, M or D), you can convert this attribute definition into a shared type, which will allow you to quickly incorporate this definition into another composite type or into the description of an output record from a transform operator. Again, double-click on the MaritalStatus attribute and in the Edit Attribute window, click Convert, which opens the Share Local Semantic Type window that you use to name this shared type.  There’s no requirement that you give the shared type the same name as the attribute from which it was derived.  You should supply a name that makes it obvious what the shared type represents. In this posting, I’ve overviewed the expressor semantic type paradigm and shown how it can be used to make your application development process more productive.  The beauty of this feature is that you choose when and to what extent you utilize the functionality, but I’m certain that if you opt to follow this approach your efforts will become more efficient and your work will progress more quickly.  As always, I encourage you to download and evaluate expressor Studio for your current and future data integration needs. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

    Read the article

  • Girl's Day 2012 in Potsdam

    - by jessica.ebbelaar(at)oracle.com
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} Every year in April Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} , technical enterprises and other organisations are invited to organise an open day for girls – called Girl´s Day. It has become a tradition for Oracle for more than 6 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} years, to participate in this special day and to encourage girls to discover technical work environments.   On the 26th of April 2012, 27 pupils aged 12 to 15 came to Oracle’s office in Potsdam in order to obtain interesting insights about Oracle´s business practices. An interactive Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} four-hour program was specifically organized for all participants. At first, all pupils got to know Oracle as an enterprise with it’s different departments and it’s particular „business language“. What is hardware and software? Why do companies need a database? Questions as such were tailored and simply illustrated by 13 colleagues from the areas of Sales, Sales Consulting, Support and Recruitment.   Followed by a short introduction about career paths from our female colleagues and their respective departments, the girls decided, according to their interests, which business area they would like to get more insights from. Based on their decision the groups were set up and the girls than discovered the work places. This helped everyone to dive deep into the everyday work life, how the offices are structured and how communication with clients is done via web conferences. All girls were encouraged to take part in the conference together with their Oracle advisor. 12 o´clock – lunch time. Besides a well-prepared buffet Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} , all girls had now the opportunity to get all open questions clarified or to ask questions they did not dare to ask in front of a big group. After the lunch break, Anja Raack from the Graduate Recruitment team presented more about recruitment topics and gave useful advice on how to write professional emails.   After a short group assignment, where all participants had to identify common mistakes done in an email, a quiz completed this special day. All 5 groups showed a lot of enthusiasm during this game but no one had to worry as every single participant was rewarded with a prize and certificate.   To sum it up, we were very proud to host the girls for half a day and were impressed by their dedication. Hopefully, sooner or later, we will see some of them coming back to Oracle – either for the next Girl´s Day or one of our entry level positions. This day has shown that everyone can start a challenging career within an exciting industry. What matters is dedication and commitment to strive for the best.  Do you want to find out more about our job opportunities? Follow us on http://campus.oracle.com.

    Read the article

  • Testing Workflows &ndash; Test-After

    - by Timothy Klenke
    Originally posted on: http://geekswithblogs.net/TimothyK/archive/2014/05/30/testing-workflows-ndash-test-after.aspxIn this post I’m going to outline a few common methods that can be used to increase the coverage of of your test suite.  This won’t be yet another post on why you should be doing testing; there are plenty of those types of posts already out there.  Assuming you know you should be testing, then comes the problem of how do I actual fit that into my day job.  When the opportunity to automate testing comes do you take it, or do you even recognize it? There are a lot of ways (workflows) to go about creating automated tests, just like there are many workflows to writing a program.  When writing a program you can do it from a top-down approach where you write the main skeleton of the algorithm and call out to dummy stub functions, or a bottom-up approach where the low level functionality is fully implement before it is quickly wired together at the end.  Both approaches are perfectly valid under certain contexts. Each approach you are skilled at applying is another tool in your tool belt.  The more vectors of attack you have on a problem – the better.  So here is a short, incomplete list of some of the workflows that can be applied to increasing the amount of automation in your testing and level of quality in general.  Think of each workflow as an opportunity that is available for you to take. Test workflows basically fall into 2 categories:  test first or test after.  Test first is the best approach.  However, this post isn’t about the one and only best approach.  I want to focus more on the lesser known, less ideal approaches that still provide an opportunity for adding tests.  In this post I’ll enumerate some test-after workflows.  In my next post I’ll cover test-first. Bug Reporting When someone calls you up or forwards you a email with a vague description of a bug its usually standard procedure to create or verify a reproduction plan for the bug via manual testing and log that in a bug tracking system.  This can be problematic.  Often reproduction plans when written down might skip a step that seemed obvious to the tester at the time or they might be missing some crucial environment setting. Instead of data entry into a bug tracking system, try opening up the test project and adding a failing unit test to prove the bug.  The test project guarantees that all aspects of the environment are setup properly and no steps are missing.  The language in the test project is much more precise than the English that goes into a bug tracking system. This workflow can easily be extended for Enhancement Requests as well as Bug Reporting. Exploratory Testing Exploratory testing comes in when you aren’t sure how the system will behave in a new scenario.  The scenario wasn’t planned for in the initial system requirements and there isn’t an existing test for it.  By definition the system behaviour is “undefined”. So write a new unit test to define that behaviour.  Add assertions to the tests to confirm your assumptions.  The new test becomes part of the living system specification that is kept up to date with the test suite. Examples This workflow is especially good when developing APIs.  When you are finally done your production API then comes the job of writing documentation on how to consume the API.  Good documentation will also include code examples.  Don’t let these code examples merely exist in some accompanying manual; implement them in a test suite. Example tests and documentation do not have to be created after the production API is complete.  It is best to write the example code (tests) as you go just before the production code. Smoke Tests Every system has a typical use case.  This represents the basic, core functionality of the system.  If this fails after an upgrade the end users will be hosed and they will be scratching their heads as to how it could be possible that an update got released with this core functionality broken. The tests for this core functionality are referred to as “smoke tests”.  It is a good idea to have them automated and run with each build in order to avoid extreme embarrassment and angry customers. Coverage Analysis Code coverage analysis is a tool that reports how much of the production code base is exercised by the test suite.  In Visual Studio this can be found under the Test main menu item. The tool will report a total number for the code coverage, which can be anywhere between 0 and 100%.  Coverage Analysis shouldn’t be used strictly for numbers reporting.  Companies shouldn’t set minimum coverage targets that mandate that all projects must have at least 80% or 100% test coverage.  These arbitrary requirements just invite gaming of the coverage analysis, which makes the numbers useless. The analysis tool will break down the coverage by the various classes and methods in projects.  Instead of focusing on the total number, drill down into this view and see which classes have high or low coverage.  It you are surprised by a low number on a class this is an opportunity to add tests. When drilling through the classes there will be generally two types of reaction to a surprising low test coverage number.  The first reaction type is a recognition that there is low hanging fruit to be picked.  There may be some classes or methods that aren’t being tested, which could easy be.  The other reaction type is “OMG”.  This were you find a critical piece of code that isn’t under test.  In both cases, go and add the missing tests. Test Refactoring The general theme of this post up to this point has been how to add more and more tests to a test suite.  I’ll step back from that a bit and remind that every line of code is a liability.  Each line of code has to be read and maintained, which costs money.  This is true regardless whether the code is production code or test code. Remember that the primary goal of the test suite is that it be easy to read so that people can easily determine the specifications of the system.  Make sure that adding more and more tests doesn’t interfere with this primary goal. Perform code reviews on the test suite as often as on production code.  Hold the test code up to the same high readability standards as the production code.  If the tests are hard to read then change them.  Look to remove duplication.  Duplicate setup code between two or more test methods that can be moved to a shared function.  Entire test methods can be removed if it is found that the scenario it tests is covered by other tests.  Its OK to delete a test that isn’t pulling its own weight anymore. Remember to only start refactoring when all the test are green.  Don’t refactor the tests and the production code at the same time.  An automated test suite can be thought of as a double entry book keeping system.  The unchanging, passing production code serves as the tests for the test suite while refactoring the tests. As with all refactoring, it is best to fit this into your regular work rather than asking for time later to get it done.  Fit this into the standard red-green-refactor cycle.  The refactor step no only applies to production code but also the tests, but not at the same time.  Perhaps the cycle should be called red-green-refactor production-refactor tests (not quite as catchy).   That about covers most of the test-after workflows I can think of.  In my next post I’ll get into test-first workflows.

    Read the article

  • ASP.NET MVC 3 Hosting :: MVC 2 Strongly Typed HTML Helper and Enhanced Validation Sample

    - by mbridge
    In lue of the off the official release of ASP.NET MVC 2 RTM, I decided I would put together a quick sample of the enhanced HTML.Helpers and validation controls. I am going to use my sample event site where I will have a form so a user can search for information about a certain events. So when the Search page loads the Search action is fired return my strongly typed model. to the view.    1: [HttpGet]    2: public ViewResult Search(): public ViewResult Search()    3: {    4:     IList<EventsModel> result = _eventsService.GetEventList();    5:     var viewModel = new EventSearchModel    6:                         {    7:                             EventList = new SelectList(result, "EventCode","EventName","Select Event")    8:                         };    9:     return View(viewModel);  10: } Nothing special here, although I did want to show how to load up a strongly typed drop down list because that hung me up for a little bit. So to that, I am going to pass back a SelectList to the view and my HTML helper should no how to load this. So lets take a look at the mark up for the view.    1: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master"    2: Inherits="System.Web.Mvc.ViewPage<EventsSample.Models.EventSearchModel>" %>    3:     4: <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server">    5:     Search    6: </asp:Content>    7:     8: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">    9:   10:     <h2>Search for Events</h2>  11:   12:     <% using (Html.BeginForm("Search","Events")) {%>  13:         <%= Html.ValidationSummary(true) %>  14:          15:         <fieldset>  16:             <legend>Fields</legend>  17:              18:             <div class="editor-label">  19:                 <%= Html.LabelFor(model => model.EventNumber) %>  20:             </div>  21:             <div class="editor-field">  22:                 <%= Html.TextBoxFor(model => model.EventNumber) %>  23:                 <%= Html.ValidationMessageFor(model => model.EventNumber) %>  24:             </div>  25:              26:             <div class="editor-label">  27:                 <%= Html.LabelFor(model => model.GuestLastName) %>  28:             </div>  29:             <div class="editor-field">  30:                 <%= Html.TextBoxFor(model => model.GuestLastName) %>  31:                 <%= Html.ValidationMessageFor(model => model.GuestLastName) %>  32:             </div>  33:              34:             <div class="editor-label">  35:                 <%= Html.LabelFor(model => model.EventName) %>  36:             </div>  37:             <div class="editor-field">  38:                 <%= Html.DropDownListFor(model => model.EventName, Model.EventList,"Select Event") %>  39:                 <%= Html.ValidationMessageFor(model => model.EventName) %>  40:             </div>  41:              42:             <p>  43:                 <input type="submit" value="Save" />  44:             </p>  45:         </fieldset>  46:   47:     <% } %>  48:   49:     <div>  50:         <%= Html.ActionLink("Back to List", "Index") %>  51:     </div>  52:   53: </asp:Content> A nice feature is the scaffolding that MVC has to generate code. I simply right clicked inside my Search() action, inside the EventsController and selected “Add View” and then I selected my strongly typed object that I wanted to pass to the view and also selected that I wanted the content type be “Edit”. With that the aspx page was completely generated, although I did have to go back in and change the textbox for the Event Names to a drop down list of the names to select from. The new feature with MVC 2 are the strongly typed HTML helpers. So now, my textboxes, drop down list, and validation helpers are all strongly typed to my model.  This features gives you the benefits of intellisense and also makes it easier to debug. “The Gu” has a great post about the feature in case you want more details. The DropDownListFor function to generate the drop down list was a little tricky for me. You first need to use a Lanbda expression to pass in the property you want the selected value assigned to in your model, and then you need to pass in the list directly from the model. Validations To validate the form, you can use the strongly type validation HTML helpers which will inspect your model and return errors if the validation fails. The definitions of these rules are set directly on the Model itself so lets take a look.    1: using System.ComponentModel.DataAnnotations;    2: using System.Web.Mvc;    3:     4: namespace EventsSample.Models    5: {    6:     public class EventSearchModel    7:     {    8:         [Required(ErrorMessage = "Please enter the event number.")]    9:         [RegularExpression(@"\w{6}",  10:             ErrorMessage = "The Event Number must be 6 letters and/or numbers.")]  11:         public string EventNumber { get; set; }  12:   13:         [Required(ErrorMessage = "Please enter the guest's last name.")]  14:         [RegularExpression(@"^[A-Za-zÀ-ÖØ-öø-ÿ1-9 '\-\.]{1,22}$",  15:             ErrorMessage = "The gueest's last name must 1 to 20 characters.")]  16:         public string GuestLastName { get; set; }  17:   18:         public string EventName { get; set; }  19:         public SelectList EventList { get; set; }  20:     }  21: } Pretty cool! Okay, the only thing left to do is perform the validation in the POST action.    1: [HttpPost]    2: public ViewResult Search(EventSearchModel eventSearchModel)    3: {    4:     if (ModelState.IsValid) return View("SearchResults");    5:     else    6:     {    7:          IList<EventsModel> result = _eventsService.GetEventList();    8:         eventSearchModel.EventList = new SelectList(result, "EVentCode","EventName");   9:   10:         return View(eventSearchModel);  11:     }  12: }  13:     } If the form entries are valid, here I am simply displaying the SearchResult, but in a real world sample I would also go out get the results first. You get the idea though. In my case, when the form is not valid, I also had to reload my SelectList with the event names before I loaded the page again. Remember this is MVC, no _VieState here :) So that’s it. Now my form is validating the data and when it fails it looks like this.

    Read the article

  • Oracle's Global Single Schema

    - by david.butler(at)oracle.com
    Maximizing business process efficiencies in a heterogeneous environment is very difficult. The difficulty stems from the fact that the various applications across the Information Technology (IT) landscape employ different integration standards, different message passing strategies, and different workflow engines. Vendors such as Oracle and others are delivering tools to help IT organizations manage the complexities introduced by these differences. But the one remaining intractable problem impacting efficient operations is the fact that these applications have different definitions for the same business data. Business data is your business information codified for computer programs to use. A good data model will represent the way your organization does business. The computer applications your organization deploys to improve operational efficiency are built to operate on the business data organized into this schema.  If the schema does not represent how you do business, the applications on that schema cannot provide the features you need to achieve the desired efficiencies. Business processes span these applications. Data problems break these processes rendering them far less efficient than they need to be to achieve organization goals. Thus, the expected return on the investment in these applications is never realized. The success of all business processes depends on the availability of accurate master data.  Clearly, the solution to this problem is to consolidate all the master data an organization uses to run its business. Then clean it up, augment it, govern it, and connect it back to the applications that need it. Until now, this obvious solution has been difficult to achieve because no one had defined a data model sufficiently broad, deep and flexible enough to support transaction processing on all key business entities and serve as a master superset to all other operational data models deployed in heterogeneous IT environments. Today, the situation has changed. Oracle has created an operational data model (aka schema) that can support accurate and consistent master data across heterogeneous IT systems. This is foundational for providing a way to consolidate and integrate master data without having to replace investments in existing applications. This Global Single Schema (GSS) represents a revolutionary breakthrough that allows for true master data consolidation. Oracle has deep knowledge of applications dating back to the early 1990s.  It developed applications in the areas of Supply Chain Management (SCM), Product Lifecycle Management (PLM), Enterprise Resource Planning (ERP), Customer Relationship Management (CRM), Human Capital Management (HCM), Financials and Manufacturing. In addition, Oracle applications were delivered for key industries such as Communications, Financial Services, Retail, Public Sector, High Tech Manufacturing (HTM) and more. Expertise in all these areas drove requirements for GSS. The following figure illustrates Oracle's unique position that enabled the creation of the Global Single Schema. GSS Requirements Gathering GSS defines all the key business entities and attributes including Customers, Contacts, Suppliers, Accounts, Products, Services, Materials, Employees, Installed Base, Sites, Assets, and Inventory to name just a few. In addition, Oracle delivers GSS pre-integrated with a wide variety of operational applications.  Business Process Automation EBusiness is about maximizing operational efficiency. At the highest level, these 'operations' span all that you do as an organization.  The following figure illustrates some of these high-level business processes. Enterprise Business Processes Supplies are procured. Assets are maintained. Materials are stored. Inventory is accumulated. Products and Services are engineered, produced and sold. Customers are serviced. And across this entire spectrum, Employees do the procuring, supporting, engineering, producing, selling and servicing. Not shown, but not to be overlooked, are the accounting and the financial processes associated with all this procuring, manufacturing, and selling activity. Supporting all these applications is the master data. When this data is fragmented and inconsistent, the business processes fail and inefficiencies multiply. But imagine having all the data under these operational business processes in one place. ·            The same accurate and timely customer data will be provided to all your operational applications from the call center to the point of sale. ·            The same accurate and timely supplier data will be provided to all your operational applications from supply chain planning to procurement. ·            The same accurate and timely product information will be available to all your operational applications from demand chain planning to marketing. You would have a single version of the truth about your assets, financial information, customers, suppliers, employees, products and services to support your business automation processes as they flow across your business applications. All company and partner personnel will access the same exact data entity across all your channels and across all your lines of business. Oracle's Global Single Schema enables this vision of a single version of the truth across the heterogeneous operational applications supporting the entire enterprise. Global Single Schema Oracle's Global Single Schema organizes hundreds of thousands of attributes into 165 major schema objects supporting over 180 business application modules. It is designed for international operations, and extensibility.  The schema is delivered with a full set of public Application Programming Interfaces (APIs) and an Integration Repository with modern Service Oriented Architecture interfaces to make data available as a services (DaaS) to business processes and enable operations in heterogeneous IT environments. ·         Key tables can be extended with unlimited numbers of additional attributes and attribute groups for maximum flexibility.  o    This enables model extensions that reflect business entities unique to your organization's operations. ·         The schema is multi-organization enabled so data manipulation can be controlled along organizational boundaries. ·         It uses variable byte Unicode to support over 31 languages. ·         The schema encodes flexible date and flexible address formats for easy localizations. No matter how complex your business is, Oracle's Global Single Schema can hold your business objects and support your global operations. Oracle's Global Single Schema identifies and defines the business objects an enterprise needs within the context of its business operations. The interrelationships between the business objects are also contained within the GSS data model. Their presence expresses fundamental business rules for the interaction between business entities. The following figure illustrates some of these connections.   Interconnected Business Entities Interconnecte business processes require interconnected business data. No other MDM vendor has this capability. Everyone else has either one entity they can master or separate disconnected models for various business entities. Higher level integrations are made available, but that is a weak architectural alternative to data level integration in this critically important aspect of Master Data Management.    

    Read the article

  • How accurate is "Business logic should be in a service, not in a model"?

    - by Jeroen Vannevel
    Situation Earlier this evening I gave an answer to a question on StackOverflow. The question: Editing of an existing object should be done in repository layer or in service? For example if I have a User that has debt. I want to change his debt. Should I do it in UserRepository or in service for example BuyingService by getting an object, editing it and saving it ? My answer: You should leave the responsibility of mutating an object to that same object and use the repository to retrieve this object. Example situation: class User { private int debt; // debt in cents private string name; // getters public void makePayment(int cents){ debt -= cents; } } class UserRepository { public User GetUserByName(string name){ // Get appropriate user from database } } A comment I received: Business logic should really be in a service. Not in a model. What does the internet say? So, this got me searching since I've never really (consciously) used a service layer. I started reading up on the Service Layer pattern and the Unit Of Work pattern but so far I can't say I'm convinced a service layer has to be used. Take for example this article by Martin Fowler on the anti-pattern of an Anemic Domain Model: There are objects, many named after the nouns in the domain space, and these objects are connected with the rich relationships and structure that true domain models have. The catch comes when you look at the behavior, and you realize that there is hardly any behavior on these objects, making them little more than bags of getters and setters. Indeed often these models come with design rules that say that you are not to put any domain logic in the the domain objects. Instead there are a set of service objects which capture all the domain logic. These services live on top of the domain model and use the domain model for data. (...) The logic that should be in a domain object is domain logic - validations, calculations, business rules - whatever you like to call it. To me, this seemed exactly what the situation was about: I advocated the manipulation of an object's data by introducing methods inside that class that do just that. However I realize that this should be a given either way, and it probably has more to do with how these methods are invoked (using a repository). I also had the feeling that in that article (see below), a Service Layer is more considered as a façade that delegates work to the underlying model, than an actual work-intensive layer. Application Layer [his name for Service Layer]: Defines the jobs the software is supposed to do and directs the expressive domain objects to work out problems. The tasks this layer is responsible for are meaningful to the business or necessary for interaction with the application layers of other systems. This layer is kept thin. It does not contain business rules or knowledge, but only coordinates tasks and delegates work to collaborations of domain objects in the next layer down. It does not have state reflecting the business situation, but it can have state that reflects the progress of a task for the user or the program. Which is reinforced here: Service interfaces. Services expose a service interface to which all inbound messages are sent. You can think of a service interface as a façade that exposes the business logic implemented in the application (typically, logic in the business layer) to potential consumers. And here: The service layer should be devoid of any application or business logic and should focus primarily on a few concerns. It should wrap Business Layer calls, translate your Domain in a common language that your clients can understand, and handle the communication medium between server and requesting client. This is a serious contrast to other resources that talk about the Service Layer: The service layer should consist of classes with methods that are units of work with actions that belong in the same transaction. Or the second answer to a question I've already linked: At some point, your application will want some business logic. Also, you might want to validate the input to make sure that there isn't something evil or nonperforming being requested. This logic belongs in your service layer. "Solution"? Following the guidelines in this answer, I came up with the following approach that uses a Service Layer: class UserController : Controller { private UserService _userService; public UserController(UserService userService){ _userService = userService; } public ActionResult MakeHimPay(string username, int amount) { _userService.MakeHimPay(username, amount); return RedirectToAction("ShowUserOverview"); } public ActionResult ShowUserOverview() { return View(); } } class UserService { private IUserRepository _userRepository; public UserService(IUserRepository userRepository) { _userRepository = userRepository; } public void MakeHimPay(username, amount) { _userRepository.GetUserByName(username).makePayment(amount); } } class UserRepository { public User GetUserByName(string name){ // Get appropriate user from database } } class User { private int debt; // debt in cents private string name; // getters public void makePayment(int cents){ debt -= cents; } } Conclusion All together not much has changed here: code from the controller has moved to the service layer (which is a good thing, so there is an upside to this approach). However this doesn't look like it had anything to do with my original answer. I realize design patterns are guidelines, not rules set in stone to be implemented whenever possible. Yet I have not found a definitive explanation of the service layer and how it should be regarded. Is it a means to simply extract logic from the controller and put it inside a service instead? Is it supposed to form a contract between the controller and the domain? Should there be a layer between the domain and the service layer? And, last but not least: following the original comment Business logic should really be in a service. Not in a model. Is this correct? How would I introduce my business logic in a service instead of the model?

    Read the article

  • ASP.NET WebAPI Security 5: JavaScript Clients

    - by Your DisplayName here!
    All samples I showed in my last post were in C#. Christian contributed another client sample in some strange language that is supposed to work well in browsers ;) JavaScript client scenarios There are two fundamental scenarios when it comes to JavaScript clients. The most common is probably that the JS code is originating from the same web application that also contains the web APIs. Think a web page that does some AJAX style callbacks to an API that belongs to that web app – Validation, data access etc. come to mind. Single page apps often fall in that category. The good news here is that this scenario just works. The typical course of events is that the user first logs on to the web application – which will result in an authentication cookie of some sort. That cookie will get round-tripped with your AJAX calls and ASP.NET does its magic to establish a client identity context. Since WebAPI inherits the security context from its (web) host, the client identity is also available here. The other fundamental scenario is JavaScript code *not* running in the context of the WebAPI hosting application. This is more or less just like a normal desktop client – either running in the browser, or if you think of Windows 8 Metro style apps as “real” desktop apps. In that scenario we do exactly the same as the samples did in my last post – obtain a token, then use it to call the service. Obtaining a token from IdentityServer’s resource owner credential OAuth2 endpoint could look like this: thinktectureIdentityModel.BrokeredAuthentication = function (stsEndpointAddress, scope) {     this.stsEndpointAddress = stsEndpointAddress;     this.scope = scope; }; thinktectureIdentityModel.BrokeredAuthentication.prototype = function () {     getIdpToken = function (un, pw, callback) {         $.ajax({             type: 'POST',             cache: false,             url: this.stsEndpointAddress,             data: { grant_type: "password", username: un, password: pw, scope: this.scope },             success: function (result) {                 callback(result.access_token);             },             error: function (error) {                 if (error.status == 401) {                     alert('Unauthorized');                 }                 else {                     alert('Error calling STS: ' + error.responseText);                 }             }         });     };     createAuthenticationHeader = function (token) {         var tok = 'IdSrv ' + token;         return tok;     };     return {         getIdpToken: getIdpToken,         createAuthenticationHeader: createAuthenticationHeader     }; } (); Calling the service with the requested token could look like this: function getIdentityClaimsFromService() {     authHeader = authN.createAuthenticationHeader(token);     $.ajax({         type: 'GET',         cache: false,         url: serviceEndpoint,         beforeSend: function (req) {             req.setRequestHeader('Authorization', authHeader);         },         success: function (result) {              $.each(result.Claims, function (key, val) {                 $('#claims').append($('<li>' + val.Value + '</li>'))             });         },         error: function (error) {             alert('Error: ' + error.responseText);         }     }); I updated the github repository, you can can play around with the code yourself.

    Read the article

  • Design for complex ATG applications

    - by Glen Borkowski
    Overview Needless to say, some ATG applications are more complex than others.  Some ATG applications support a single site, single language, single catalog, single currency, have a single development staff, single business team, and a relatively simple business model.  The real complex applications have to support multiple sites, multiple languages, multiple catalogs, multiple currencies, a couple different development teams, multiple business teams, and a highly complex business model (and processes to go along with it).  While it's still important to implement a proper design for simple applications, it's absolutely critical to do this for the complex applications.  Why?  It's all about time and money.  If you are unable to manage your complex applications in an efficient manner, the cost of managing it will increase dramatically as will the time to get things done (time to market).  On the positive side, your competition is most likely in the same situation, so you just need to be more efficient than they are. This article is intended to discuss a number of key areas to think about when designing complex applications on ATG.  Some of this can get fairly technical, so it may help to get some background first.  You can get enough of the required background information from this post.  After reading that, come back here and follow along. Application Design Of all the various types of ATG applications out there, the most complex tend to be the ones in the telecommunications industry - especially the ones which operate in multiple countries.  To get started, let's assume that we are talking about an application like that.  One that has these properties: Operates in multiple countries - must support multiple sites, catalogs, languages, and currencies The organization is fairly loosely-coupled - single brand, but different businesses across different countries There is some common functionality across all sites in all countries There is some common functionality across different sites within the same country Sites within a single country may have some unique functionality - relative to other sites in the same country Complex product catalog (mostly in terms of bundles, eligibility, and compatibility) At this point, I'll assume you have read through the required reading and have a decent understanding of how ATG modules work... Code / configuration - assemble into modules When it comes to defining your modules for a complex application, there are a number of goals: Divide functionality between the modules in a way that maps to your business Group common functionality 'further down in the stack of modules' Provide a good balance between shared resources and autonomy for countries / sites Now I'll describe a high level approach to how you could accomplish those goals...  Let's start from the bottom and work our way up.  At the very bottom, you have the modules that ship with ATG - the 'out of the box' stuff.  You want to make sure that you are leveraging all the modules that make sense in order to get the most value from ATG as possible - and less stuff you'll have to write yourself.  On top of the ATG modules, you should create what we'll refer to as the Corporate Foundation Module described as follows: Sits directly on top of ATG modules Used by all applications across all countries and sites - this is the foundation for everyone Contains everything that is common across all countries / all sites Once established and settled, will change less frequently than other 'higher' modules Encapsulates as many enterprise-wide integrations as possible Will provide means of code sharing therefore less development / testing - faster time to market Contains a 'reference' web application (described below) The next layer up could be multiple modules for each country (you could replace this with region if that makes more sense).  We'll define those modules as follows: Sits on top of the corporate foundation module Contains what is unique to all sites in a given country Responsible for managing any resource bundles for this country (to handle multiple languages) Overrides / replaces corporate integration points with any country-specific ones Finally, we will define what should be a fairly 'thin' (in terms of functionality) set of modules for each site as follows: Sits on top of the country it resides in module Contains what is unique for a given site within a given country Will mostly contain configuration, but could also define some unique functionality as well Contains one or more web applications The graphic below should help to indicate how these modules fit together: Web applications As described in the previous section, there are many opportunities for sharing (minimizing costs) as it relates to the code and configuration aspects of ATG modules.  Web applications are also contained within ATG modules, however, sharing web applications can be a bit more difficult because this is what the end customer actually sees, and since each site may have some degree of unique look & feel, sharing becomes more challenging.  One approach that can help is to define a 'reference' web application at the corporate foundation layer to act as a solid starting point for each site.  Here's a description of the 'reference' web application: Contains minimal / sample reference styling as this will mostly be addressed at the site level web app Focus on functionality - ensure that core functionality is revealed via this web application Each individual site can use this as a starting point There may be multiple types of web apps (i.e. B2C, B2B, etc) There are some techniques to share web application assets - i.e. multiple web applications, defined in the web.xml, and it's worth investigating, but is out of scope here. Reference infrastructure In this complex environment, it is assumed that there is not a single infrastructure for all countries and all sites.  It's more likely that different countries (or regions) could have their own solution for infrastructure.  In this case, it will be advantageous to define a reference infrastructure which contains all the hardware and software that make up the core environment.  Specifications and diagrams should be created to outline what this reference infrastructure looks like, as well as it's baseline cost and the incremental cost to scale up with volume.  Having some consistency in terms of infrastructure will save time and money as new countries / sites come online.  Here are some properties of the reference infrastructure: Standardized approach to setup of hardware Type and number of servers Defines application server, operating system, database, etc... - including vendor and specific versions Consistent naming conventions Provides a consistent base of terminology and understanding across environments Defines which ATG services run on which servers Production Staging BCC / Preview Each site can change as required to meet scale requirements Governance / organization It should be no surprise that the complex application we're talking about is backed by an equally complex organization.  One of the more challenging aspects of efficiently managing a series of complex applications is to ensure the proper level of governance and organization.  Here are some ideas and goals to work towards: Establish a committee to make enterprise-wide decisions that affect all sites Representation should be evenly distributed Should have a clear communication procedure Focus on high level business goals Evaluation of feature / function gaps and how that relates to ATG release schedule / roadmap Determine when to upgrade & ensure value will be realized Determine how to manage various levels of modules Who is responsible for maintaining corporate / country / site layers Determine a procedure for controlling what goes in the corporate foundation module Standardize on source code control, database, hardware, OS versions, J2EE app servers, development procedures, etc only use tested / proven versions - this is something that should be centralized so that every country / site does not have to worry about compatibility between versions Create a innovation team Quickly develop new features, perform proof of concepts All teams can benefit from their findings Summary At this point, it should be clear why the topics above (design, governance, organization, etc) are critical to being able to efficiently manage a complex application.  To summarize, it's all about competitive advantage...  You will need to reduce costs and improve time to market with the goal of providing a better experience for your end customers.  You can reduce cost by reducing development time, time allocated to testing (don't have to test the corporate foundation module over and over again - do it once), and optimizing operations.  With an efficient design, you can improve your time to market and your business will be more flexible  and agile.  Over time, you'll find that you're becoming more focused on offering functionality that is new to the market (creativity) and this will be rewarded - you're now a leader. In addition to the above, you'll realize soft benefits as well.  Your staff will be operating in a culture based on sharing.  You'll want to reward efforts to improve and enhance the foundation as this will benefit everyone.  This culture will inspire innovation, which can only lend itself to your competitive advantage.

    Read the article

  • The Birth of a Method - Where did OUM come from?

    - by user702549
    It seemed fitting to start this blog entry with the OUM vision statement. The vision for the Oracle® Unified Method (OUM) is to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product.  Well, it’s that time of year again; we just finished testing and packaging OUM 5.6.  It will be released for general availability to qualifying customers and partners this month.  Because of this, I’ve been reflecting back on how the birth of Oracle’s Unified method - OUM came about. As the Release Director of OUM, I’ve been honored to package every method release.  No, maybe you’d say it’s not so special.  Of course, anyone can use packaging software to create an .exe file.  But to me, it is pretty special, because so many people work together to make each release come about.  The rich content that results is what makes OUM’s history worth talking about.   To me, professionally speaking, working on OUM, well it’s been “a labor of love”.  My youngest child was just 8 years old when OUM was born, and she’s now in High School!  Watching her grow and change has been fascinating, if you ask her, she’s grown up hearing about OUM.  My son would often walk into my home office and ask “How is OUM today, Mom?”  I am one of many people that take care of OUM, and have watched the method “mature” over these last 6 years.  Maybe that makes me a "Method Mom" (someone in one of my classes last year actually said this outloud) but there are so many others who collaborate and care about OUM Development. I’ve thought about writing this blog entry for a long time just to reflect on how far the Method has come. Each release, as I prepare the OUM Contributors list, I see how many people’s experience and ideas it has taken to create this wealth of knowledge, process and task guidance as well as templates and examples.  If you’re wondering how many people, just go into OUM select the resources button on the top of most pages of the method, and on that resources page click the ABOUT link. So now back to my nostalgic moment as I finished release 5.6 packaging.  I reflected back, on all the things that happened that cause OUM to become not just a dream but to actually come to fruition.  Here are some key conditions that make it possible for each release of the method: A vision to have one method instead of many methods, thereby focusing on deeper, richer content People within Oracle’s consulting Organization  willing to contribute to OUM providing Subject Matter Experts who are willing to write down and share what they know. Oracle’s continued acquisition of software companies, the need to assimilate high quality existing materials from these companies The need to bring together people from very different backgrounds and provide a common language to support Oracle Product implementations that often involve multiple product families What came first, and then what was the strategy? Initially OUM 4.0 was based on Oracle’s J2EE Custom Development Method (JCDM), it was a good “backbone”  (work breakdown structure) it was Unified Process based, and had good content around UML as well as custom software development.  But it needed to be extended in order to achieve the OUM Vision. What happened after that was to take in the “best of the best”, the legacy and acquired methods were scheduled for assimilation into OUM, one release after another.  We incrementally built OUM.  We didn’t want to lose any of the expertise that was reflected in AIM (Oracle’s legacy Application Implementation Method), Compass (People Soft’s Application implementation method) and so many more. When was OUM born? OUM 4.1 published April 30, 2006.  This release allowed Oracles Advanced Technology groups to begin the very first implementations of Fusion Middleware.  In the early days of the Method we would prepare several releases a year.  Our iterative release development cycle began and continues to be refined with each Method release.  Now we typically see one major release each year. The OUM release development cycle is not unlike many Oracle Implementation projects in that we need to gather requirements, prioritize, prepare the content, test package and then go production.  Typically we develop an OUM release MoSCoW (must have, should have, could have, and won’t have) right after the prior release goes out.   These are the high level requirements.  We break the timeframe into increments, frequent checkpoints that help us assess the content and progress is measured through frequent checkpoints.  We work as a team to prioritize what should be done in each increment. Yes, the team provides the estimates for what can be done within a particular increment.  We sometimes have Method Development workshops (physically or virtually) to accelerate content development on a particular subject area, that is where the best content results. As the written content nears the final stages, it goes through edit and evaluation through peer reviews, and then moves into the release staging environment.  Then content freeze and testing of the method pack take place.  This iterative cycle is run using the OUM artifacts that make sense “fit for purpose”, project plans, MoSCoW lists, Test plans are just a few of the OUM work products we use on a Method Release project. In 2007 OUM 4.3, 4.4 and 4.5 were published.  With the release of 4.5 our Custom BI Method (Data Warehouse Method FastTrack) was assimilated into OUM.  These early releases helped us align Oracle’s Unified method with other industry standards Then in 2008 we made significant changes to the OUM “Backbone” to support Applications Implementation projects with that went to the OUM 5.0 release.  Now things started to get really interesting.  Next we had some major developments in the Envision focus area in the area of Enterprise Architecture.  We acquired some really great content from the former BEA, Liquid Enterprise Method (LEM) along with some SMEs who were willing to work at bringing this content into OUM.  The Service Oriented Architecture content in OUM is extensive and can help support the successful implementation of Fusion Middleware, as well as Fusion Applications. Of course we’ve developed a wealth of OUM training materials that work also helps to improve the method content.  It is one thing to write “how to”, and quite another to be able to teach people how to use the materials to improve the success of their projects.  I’ve learned so much by teaching people how to use OUM. What's next? So here toward the end of 2012, what’s in store in OUM 5.6, well, I’m sure you won’t be surprised the answer is Cloud Computing.   More details to come in the next couple of weeks!  The best part of being involved in the development of OUM is to see how many people have “adopted” OUM over these six years, Clients, Partners, and Oracle Consultants.  The content just gets better with each release.   I’d love to hear your comments on how OUM has evolved, and ideas for new content you’d like to see in the upcoming releases.

    Read the article

  • Microsoft Business Intelligence Seminar 2011

    - by DavidWimbush
    I was lucky enough to attend the maiden presentation of this at Microsoft Reading yesterday. It was pretty gripping stuff not only because of what was said but also because of what could only be hinted at. Here's what I took away from the day. (Disclaimer: I'm not a BI guru, just a reasonably experienced BI developer, so I may have misunderstood or misinterpreted a few things. Particularly when so much of the talk was about the vision and subtle hints of what is coming. Please comment if you think I've got anything wrong. I'm also not going to even try to cover Master Data Services as I struggled to imagine how you would actually use it.) I was a bit worried when I learned that the whole day was going to be presented by one guy but Rafal Lukawiecki is a very engaging speaker. He's going to be presenting this about 20 times around the world over the coming months. If you get a chance to hear him speak, I say go for it. No doubt some of the hints will become clearer as Denali gets closer to RTM. Firstly, things are definitely happening in the SQL Server Reporting and BI world. Traditionally IT would build a data warehouse, then cubes on top of that, and then publish them in a structured and controlled way. But, just as with many IT projects in general, by the time it's finished the business has moved on and the system no longer meets their requirements. This not sustainable and something more agile is needed but there has to be some control. Apparently we're going to be hearing the catchphrase 'Balancing agility with control' a lot. More users want more access to more data. Can they define what they want? Of course not, but they'll recognise it when they see it. It's estimated that only 28% of potential BI users have meaningful access to the data they need, so there is a real pent-up demand. The answer looks like: give them some self-service tools so they can experiment and see what works, and then IT can help to support the results. It's estimated that 32% of Excel users are comfortable with its analysis tools such as pivot tables. It's the power user's preferred tool. Why fight it? That's why PowerPivot is an Excel add-in and that's why they released a Data Mining add-in for it as well. It does appear that the strategy is going to be to use Reporting Services (in SharePoint mode), PowerPivot, and possibly something new (smiles and hints but no details) to create reports and explore data. Everything will be published and managed in SharePoint which gives users the ability to mash-up, share and socialise what they've found out. SharePoint also gives IT tools to understand what people are looking at and where to concentrate effort. If PowerPivot report X becomes widely used, it's time to check that it shows what they think it does and perhaps get it a bit more under central control. There was more SharePoint detail that went slightly over my head regarding where Excel Services and Excel Web Application fit in, the differences between them, and the suggestion that it is likely they will one day become one (but not in the immediate future). That basic pattern is set to be expanded upon by further exploiting Vertipaq (the columnar indexing engine that enables PowerPivot to store and process a lot of data fast and in a small memory footprint) to provide scalability 'from the desktop to the data centre', and some yet to be detailed advances in 'frictionless deployment' (part of which is about making the difference between local and the cloud pretty much irrelevant). Excel looks like becoming Microsoft's primary BI client. It already has: the ability to consume cubes strong visualisation tools slicers (which are part of Excel not PowerPivot) a data mining add-in PowerPivot A major hurdle for self-service BI is presenting the data in a consumable format. You can't just give users PowerPivot and a server with a copy of the OLTP database(s). Building cubes is labour intensive and doesn't always give the user what they need. This is where the BI Semantic Model (BISM) comes in. I gather it's a layer of metadata you define that can combine multiple data sources (and types of data source) into a clear 'interface' that users can work with. It comes with a new query language called DAX. SSAS cubes are unlikely to go away overnight because, with their pre-calculated results, they are still the most efficient way to work with really big data sets. A few other random titbits that came up: Reporting Services is going to get some good new stuff in Denali. Keep an eye on www.projectbotticelli.com for the slides. You can also view last year's seminar sessions which covered a lot of the same ground as far as the overall strategy is concerned. They plan to add more material as Denali's features are publicly exposed. Check out the PASS keynote address for a showing of Yahoo's SQL BI servers. Apparently they wheeled the rack out on stage still plugged in and running! Check out the Excel 2010 Data Mining Add-Ins. 32 bit only at present but 64 bit is on the way. There are lots of data sets, many of them free, at the Windows Azure Marketplace Data Market (where you can also get ESRI shape files). If you haven't already seen it, have a look at the Silverlight Pivot Viewer (http://weblogs.asp.net/scottgu/archive/2010/06/29/silverlight-pivotviewer-now-available.aspx). The Bing Maps Data Connector is worth a look if you're into spatial stuff (http://www.bing.com/community/site_blogs/b/maps/archive/2010/07/13/data-connector-sql-server-2008-spatial-amp-bing-maps.aspx).  

    Read the article

  • WebSocket Applications using Java: JSR 356 Early Draft Now Available (TOTD #183)

    - by arungupta
    WebSocket provide a full-duplex and bi-directional communication protocol over a single TCP connection. JSR 356 is defining a standard API for creating WebSocket applications in the Java EE 7 Platform. This Tip Of The Day (TOTD) will provide an introduction to WebSocket and how the JSR is evolving to support the programming model. First, a little primer on WebSocket! WebSocket is a combination of IETF RFC 6455 Protocol and W3C JavaScript API (still a Candidate Recommendation). The protocol defines an opening handshake and data transfer. The API enables Web pages to use the WebSocket protocol for two-way communication with the remote host. Unlike HTTP, there is no need to create a new TCP connection and send a chock-full of headers for every message exchange between client and server. The WebSocket protocol defines basic message framing, layered over TCP. Once the initial handshake happens using HTTP Upgrade, the client and server can send messages to each other, independent from the other. There are no pre-defined message exchange patterns of request/response or one-way between client and and server. These need to be explicitly defined over the basic protocol. The communication between client and server is pretty symmetric but there are two differences: A client initiates a connection to a server that is listening for a WebSocket request. A client connects to one server using a URI. A server may listen to requests from multiple clients on the same URI. Other than these two difference, the client and server behave symmetrically after the opening handshake. In that sense, they are considered as "peers". After a successful handshake, clients and servers transfer data back and forth in conceptual units referred as "messages". On the wire, a message is composed of one or more frames. Application frames carry payload intended for the application and can be text or binary data. Control frames carry data intended for protocol-level signaling. Now lets talk about the JSR! The Java API for WebSocket is worked upon as JSR 356 in the Java Community Process. This will define a standard API for building WebSocket applications. This JSR will provide support for: Creating WebSocket Java components to handle bi-directional WebSocket conversations Initiating and intercepting WebSocket events Creation and consumption of WebSocket text and binary messages The ability to define WebSocket protocols and content models for an application Configuration and management of WebSocket sessions, like timeouts, retries, cookies, connection pooling Specification of how WebSocket application will work within the Java EE security model Tyrus is the Reference Implementation for JSR 356 and is already integrated in GlassFish 4.0 Promoted Builds. And finally some code! The API allows to create WebSocket endpoints using annotations and interface. This TOTD will show a simple sample using annotations. A subsequent blog will show more advanced samples. A POJO can be converted to a WebSocket endpoint by specifying @WebSocketEndpoint and @WebSocketMessage. @WebSocketEndpoint(path="/hello")public class HelloBean {     @WebSocketMessage    public String sayHello(String name) {         return "Hello " + name + "!";     }} @WebSocketEndpoint marks this class as a WebSocket endpoint listening at URI defined by the path attribute. The @WebSocketMessage identifies the method that will receive the incoming WebSocket message. This first method parameter is injected with payload of the incoming message. In this case it is assumed that the payload is text-based. It can also be of the type byte[] in case the payload is binary. A custom object may be specified if decoders attribute is specified in the @WebSocketEndpoint. This attribute will provide a list of classes that define how a custom object can be decoded. This method can also take an optional Session parameter. This is injected by the runtime and capture a conversation between two endpoints. The return type of the method can be String, byte[] or a custom object. The encoders attribute on @WebSocketEndpoint need to define how a custom object can be encoded. The client side is an index.jsp with embedded JavaScript. The JSP body looks like: <div style="text-align: center;"> <form action="">     <input onclick="say_hello()" value="Say Hello" type="button">         <input id="nameField" name="name" value="WebSocket" type="text"><br>    </form> </div> <div id="output"></div> The code is relatively straight forward. It has an HTML form with a button that invokes say_hello() method and a text field named nameField. A div placeholder is available for displaying the output. Now, lets take a look at some JavaScript code: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/HelloWebSocket/hello";     var websocket = new WebSocket(wsUri);     websocket.onopen = function(evt) { onOpen(evt) };     websocket.onmessage = function(evt) { onMessage(evt) };     websocket.onerror = function(evt) { onError(evt) };     function init() {         output = document.getElementById("output");     }     function say_hello() {      websocket.send(nameField.value);         writeToScreen("SENT: " + nameField.value);     } This application is deployed as "HelloWebSocket.war" (download here) on GlassFish 4.0 promoted build 57. So the WebSocket endpoint is listening at "ws://localhost:8080/HelloWebSocket/hello". A new WebSocket connection is initiated by specifying the URI to connect to. The JavaScript API defines callback methods that are invoked when the connection is opened (onOpen), closed (onClose), error received (onError), or a message from the endpoint is received (onMessage). The client API has several send methods that transmit data over the connection. This particular script sends text data in the say_hello method using nameField's value from the HTML shown earlier. Each click on the button sends the textbox content to the endpoint over a WebSocket connection and receives a response based upon implementation in the sayHello method shown above. How to test this out ? Download the entire source project here or just the WAR file. Download GlassFish4.0 build 57 or later and unzip. Start GlassFish as "asadmin start-domain". Deploy the WAR file as "asadmin deploy HelloWebSocket.war". Access the application at http://localhost:8080/HelloWebSocket/index.jsp. After clicking on "Say Hello" button, the output would look like: Here are some references for you: WebSocket - Protocol and JavaScript API JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API Capturing WebSocket on-the-wire messages

    Read the article

  • SQL SERVER – Windows File/Folder and Share Permissions – Notes from the Field #029

    - by Pinal Dave
    [Note from Pinal]: This is a 29th episode of Notes from the Field series. Security is the task which we should give it to the experts. If there is a small overlook or misstep, there are good chances that security of the organization is compromised. This is very true, but there are always devils’s advocates who believe everyone should know the security. As a DBA and Administrator, I often see people not taking interest in the Windows Security hiding behind the reason of not expert of Windows Server. We all often miss the important mission statement for the success of any organization – Teamwork. In this blog post Brian tells the story in very interesting lucid language. Read On! In this episode of the Notes from the Field series database expert Brian Kelley explains a very crucial issue DBAs and Developer faces on their production server. Linchpin People are database coaches and wellness experts for a data driven world. Read the experience of Brian in his own words. When I talk security among database professionals, I find that most have at least a working knowledge of how to apply security within a database. When I talk with DBAs in particular, I find that most have at least a working knowledge of security at the server level if we’re speaking of SQL Server. One area I see continually that is weak is in the area of Windows file/folder (NTFS) and share permissions. The typical response is, “I’m a database developer and the Windows system administrator is responsible for that.” That may very well be true – the system administrator may have the primary responsibility and accountability for file/folder and share security for the server. However, if you’re involved in the typical activities surrounding databases and moving data around, you should know these permissions, too. Otherwise, you could be setting yourself up where someone is able to get to data he or she shouldn’t, or you could be opening the door where human error puts bad data in your production system. File/Folder Permission Basics: I wrote about file/folder permissions a few years ago to give the basic permissions that are most often seen. Here’s what you must know as a minimum at the file/folder level: Read - Allows you to read the contents of the file or folder. Having read permissions allows you to copy the file or folder. Write  – Again, as the name implies, it allows you to write to the file or folder. This doesn’t include the ability to delete, however, nothing stops a person with this access from writing an empty file. Delete - Allows the file/folder to be deleted. If you overwrite files, you may need this permission. Modify - Allows read, write, and delete. Full Control - Same as modify + the ability to assign permissions. File/Folder permissions aggregate, unless there is a DENY (where it trumps, just like within SQL Server), meaning if a person is in one group that gives Read and antoher group that gives Write, that person has both Read and Write permissions. As you might expect me to say, always apply the Principle of Least Privilege. This likely means that any additional permission you might add does not need Full Control. Share Permission Basics: At the share level, here are the permissions. Read - Allows you to read the contents on the share. Change - Allows you to read, write, and delete contents on the share. Full control - Change + the ability to modify permissions. Like with file/folder permissions, these permissions aggregate, and DENY trumps. So What Access Does a Person / Process Have? Figuring out what someone or some process has depends on how the location is being accessed: Access comes through the share (\\ServerName\Share) – a combination of permissions is considered. Access is through a drive letter (C:\, E:\, S:\, etc.) – only the file/folder permissions are considered. The only complicated one here is access through the share. Here’s what Windows does: Figures out what the aggregated permissions are at the file/folder level. Figures out what the aggregated permissions are at the share level. Takes the most restrictive of the two sets of permissions. You can test this by granting Full Control over a folder (this is likely already in place for the Users local group) and then setting up a share. Give only Read access through the share, and that includes to Administrators (if you’re creating a share, likely you have membership in the Administrators group). Try to read a file through the share. Now try to modify it. The most restrictive permission is the Share level permissions. It’s set to only allow Read. Therefore, if you come through the share, it’s the most restrictive. Does This Knowledge Really Help Me? In my experience, it does. I’ve seen cases where sensitive files were accessible by every authenticated user through a share. Auditors, as you might expect, have a real problem with that. I’ve also seen cases where files to be imported as part of the nightly processing were overwritten by files intended from development. And I’ve seen cases where a process can’t get to the files it needs for a process because someone changed the permissions. If you know file/folder and share permissions, you can spot and correct these types of security flaws. Given that there are a lot of database professionals that don’t understand these permissions, if you know it, you set yourself apart. And if you’re able to help on critical processes, you begin to set yourself up as a linchpin (link to .pdf) for your organization. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

< Previous Page | 843 844 845 846 847 848 849 850 851 852 853 854  | Next Page >