symantec endpoint protect - Page 87

Route all traffic of home network through VPN

- by user436118

I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

Read the article

Route all traffic of home network through VPN [migrated]

- by user436118

I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

Read the article

Setting up a server that routes local traffic through vpn, while still being able to access internet directly

- by Kazuo

The goal is to setup a local server that routes local traffic through an uncontrolled remote vpn service while still being able to access the internet directly (not tunneled via vpn) and provide services through that direct connection. It is supposed to look like this: http://i.stack.imgur.com/74dGC.png Note: There is another router with modem between the local server and the internet. What is the easiest (best?) way to get this network setup working? I'm planning to setup the connection between the local router and the local server with simple ip forwarding. The problem now is that all the server's traffic is routed through the vpn tunnel as soon as I connect the server's openvpn client to the remote service so there is no direct internet connection available. My first idea was to setup a virtual machine (lxc container or something) and run the vpn client and local networking stuff in the vm. So that the vm receives all the incoming traffic from the local router and tunnels it through the vpn. This, as far as I understand, should not affect the physical server's network connection and should allow it to provide services to the internet. Before I start trying to set this up (I don't have much experience in networking), is there any easier or better way to do this? I would be thankful for every suggestion. Edit: Let's say the interface connected to the internet is eth0 and the interface connected to the local router is eth1. Another idea would be to create a virtual interface eth0:0 and specifiy it as openvpn's local endpoint and then force any traffic coming from eth1 through eth0:0. I'm not sure how I would force the traffic through eth0:0, though (possibly by adding routes).

Read the article

Custom ASP.NET Routing to an HttpHandler

- by Rick Strahl

As of version 4.0 ASP.NET natively supports routing via the now built-in System.Web.Routing namespace. Routing features are automatically integrated into the HtttpRuntime via a few custom interfaces. New Web Forms Routing Support In ASP.NET 4.0 there are a host of improvements including routing support baked into Web Forms via a RouteData property available on the Page class and RouteCollection.MapPageRoute() route handler that makes it easy to route to Web forms. To map ASP.NET Page routes is as simple as setting up the routes with MapPageRoute:protected void Application_Start(object sender, EventArgs e) { RegisterRoutes(RouteTable.Routes); } void RegisterRoutes(RouteCollection routes) { routes.MapPageRoute("StockQuote", "StockQuote/{symbol}", "StockQuote.aspx"); routes.MapPageRoute("StockQuotes", "StockQuotes/{symbolList}", "StockQuotes.aspx"); } and then accessing the route data in the page you can then use the new Page class RouteData property to retrieve the dynamic route data information:public partial class StockQuote1 : System.Web.UI.Page { protected StockQuote Quote = null; protected void Page_Load(object sender, EventArgs e) { string symbol = RouteData.Values["symbol"] as string; StockServer server = new StockServer(); Quote = server.GetStockQuote(symbol); // display stock data in Page View } } Simple, quick and doesn’t require much explanation. If you’re using WebForms most of your routing needs should be served just fine by this simple mechanism. Kudos to the ASP.NET team for putting this in the box and making it easy! How Routing Works To handle Routing in ASP.NET involves these steps: Registering Routes Creating a custom RouteHandler to retrieve an HttpHandler Attaching RouteData to your HttpHandler Picking up Route Information in your Request code Registering routes makes ASP.NET aware of the Routes you want to handle via the static RouteTable.Routes collection. You basically add routes to this collection to let ASP.NET know which URL patterns it should watch for. You typically hook up routes off a RegisterRoutes method that fires in Application_Start as I did in the example above to ensure routes are added only once when the application first starts up. When you create a route, you pass in a RouteHandler instance which ASP.NET caches and reuses as routes are matched. Once registered ASP.NET monitors the routes and if a match is found just prior to the HttpHandler instantiation, ASP.NET uses the RouteHandler registered for the route and calls GetHandler() on it to retrieve an HttpHandler instance. The RouteHandler.GetHandler() method is responsible for creating an instance of an HttpHandler that is to handle the request and – if necessary – to assign any additional custom data to the handler. At minimum you probably want to pass the RouteData to the handler so the handler can identify the request based on the route data available. To do this you typically add a RouteData property to your handler and then assign the property from the RouteHandlers request context. This is essentially how Page.RouteData comes into being and this approach should work well for any custom handler implementation that requires RouteData. It’s a shame that ASP.NET doesn’t have a top level intrinsic object that’s accessible off the HttpContext object to provide route data more generically, but since RouteData is directly tied to HttpHandlers and not all handlers support it it might cause some confusion of when it’s actually available. Bottom line is that if you want to hold on to RouteData you have to assign it to a custom property of the handler or else pass it to the handler via Context.Items[] object that can be retrieved on an as needed basis. It’s important to understand that routing is hooked up via RouteHandlers that are responsible for loading HttpHandler instances. RouteHandlers are invoked for every request that matches a route and through this RouteHandler instance the Handler gains access to the current RouteData. Because of this logic it’s important to understand that Routing is really tied to HttpHandlers and not available prior to handler instantiation, which is pretty late in the HttpRuntime’s request pipeline. IOW, Routing works with Handlers but not with earlier in the pipeline within Modules. Specifically ASP.NET calls RouteHandler.GetHandler() from the PostResolveRequestCache HttpRuntime pipeline event. Here’s the call stack at the beginning of the GetHandler() call: which fires just before handler resolution. Non-Page Routing – You need to build custom RouteHandlers If you need to route to a custom Http Handler or other non-Page (and non-MVC) endpoint in the HttpRuntime, there is no generic mapping support available. You need to create a custom RouteHandler that can manage creating an instance of an HttpHandler that is fired in response to a routed request. Depending on what you are doing this process can be simple or fairly involved as your code is responsible based on the route data provided which handler to instantiate, and more importantly how to pass the route data on to the Handler. Luckily creating a RouteHandler is easy by implementing the IRouteHandler interface which has only a single GetHttpHandler(RequestContext context) method. In this method you can pick up the requestContext.RouteData, instantiate the HttpHandler of choice, and assign the RouteData to it. Then pass back the handler and you’re done.Here’s a simple example of GetHttpHandler() method that dynamically creates a handler based on a passed in Handler type./// <summary> /// Retrieves an Http Handler based on the type specified in the constructor /// </summary> /// <param name="requestContext"></param> /// <returns></returns> IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; // If we're dealing with a Callback Handler // pass the RouteData for this route to the Handler if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; } Note that this code checks for a specific type of handler and if it matches assigns the RouteData to this handler. This is optional but quite a common scenario if you want to work with RouteData. If the handler you need to instantiate isn’t under your control but you still need to pass RouteData to Handler code, an alternative is to pass the RouteData via the HttpContext.Items collection:IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; requestContext.HttpContext.Items["RouteData"] = requestContext.RouteData; return handler; } The code in the handler implementation can then pick up the RouteData from the context collection as needed:RouteData routeData = HttpContext.Current.Items["RouteData"] as RouteData This isn’t as clean as having an explicit RouteData property, but it does have the advantage that the route data is visible anywhere in the Handler’s code chain. It’s definitely preferable to create a custom property on your handler, but the Context work-around works in a pinch when you don’t’ own the handler code and have dynamic code executing as part of the handler execution. An Example of a Custom RouteHandler: Attribute Based Route Implementation In this post I’m going to discuss a custom routine implementation I built for my CallbackHandler class in the West Wind Web & Ajax Toolkit. CallbackHandler can be very easily used for creating AJAX, REST and POX requests following RPC style method mapping. You can pass parameters via URL query string, POST data or raw data structures, and you can retrieve results as JSON, XML or raw string/binary data. It’s a quick and easy way to build service interfaces with no fuss. As a quick review here’s how CallbackHandler works: You create an Http Handler that derives from CallbackHandler You implement methods that have a [CallbackMethod] Attribute and that’s it. Here’s an example of an CallbackHandler implementation in an ashx.cs based handler:// RestService.ashx.cs public class RestService : CallbackHandler { [CallbackMethod] public StockQuote GetStockQuote(string symbol) { StockServer server = new StockServer(); return server.GetStockQuote(symbol); } [CallbackMethod] public StockQuote[] GetStockQuotes(string symbolList) { StockServer server = new StockServer(); string[] symbols = symbolList.Split(new char[2] { ',',';' },StringSplitOptions.RemoveEmptyEntries); return server.GetStockQuotes(symbols); } } CallbackHandler makes it super easy to create a method on the server, pass data to it via POST, QueryString or raw JSON/XML data, and then retrieve the results easily back in various formats. This works wonderful and I’ve used these tools in many projects for myself and with clients. But one thing missing has been the ability to create clean URLs. Typical URLs looked like this: http://www.west-wind.com/WestwindWebToolkit/samples/Rest/StockService.ashx?Method=GetStockQuote&symbol=msfthttp://www.west-wind.com/WestwindWebToolkit/samples/Rest/StockService.ashx?Method=GetStockQuotes&symbolList=msft,intc,gld,slw,mwe&format=xml which works and is clear enough, but also clearly very ugly. It would be much nicer if URLs could look like this: http://www.west-wind.com//WestwindWebtoolkit/Samples/StockQuote/msfthttp://www.west-wind.com/WestwindWebtoolkit/Samples/StockQuotes/msft,intc,gld,slw?format=xml (the Virtual Root in this sample is WestWindWebToolkit/Samples and StockQuote/{symbol} is the route)(If you use FireFox try using the JSONView plug-in make it easier to view JSON content) So, taking a clue from the WCF REST tools that use RouteUrls I set out to create a way to specify RouteUrls for each of the endpoints. The change made basically allows changing the above to: [CallbackMethod(RouteUrl="RestService/StockQuote/{symbol}")] public StockQuote GetStockQuote(string symbol) { StockServer server = new StockServer(); return server.GetStockQuote(symbol); } [CallbackMethod(RouteUrl = "RestService/StockQuotes/{symbolList}")] public StockQuote[] GetStockQuotes(string symbolList) { StockServer server = new StockServer(); string[] symbols = symbolList.Split(new char[2] { ',',';' },StringSplitOptions.RemoveEmptyEntries); return server.GetStockQuotes(symbols); } where a RouteUrl is specified as part of the Callback attribute. And with the changes made with RouteUrls I can now get URLs like the second set shown earlier. So how does that work? Let’s find out… How to Create Custom Routes As mentioned earlier Routing is made up of several steps: Creating a custom RouteHandler to create HttpHandler instances Mapping the actual Routes to the RouteHandler Retrieving the RouteData and actually doing something useful with it in the HttpHandler In the CallbackHandler routing example above this works out to something like this: Create a custom RouteHandler that includes a property to track the method to call Set up the routes using Reflection against the class Looking for any RouteUrls in the CallbackMethod attribute Add a RouteData property to the CallbackHandler so we can access the RouteData in the code of the handler Creating a Custom Route Handler To make the above work I created a custom RouteHandler class that includes the actual IRouteHandler implementation as well as a generic and static method to automatically register all routes marked with the [CallbackMethod(RouteUrl="…")] attribute. Here’s the code:/// <summary> /// Route handler that can create instances of CallbackHandler derived /// callback classes. The route handler tracks the method name and /// creates an instance of the service in a predictable manner /// </summary> /// <typeparam name="TCallbackHandler">CallbackHandler type</typeparam> public class CallbackHandlerRouteHandler : IRouteHandler { /// <summary> /// Method name that is to be called on this route. /// Set by the automatically generated RegisterRoutes /// invokation. /// </summary> public string MethodName { get; set; } /// <summary> /// The type of the handler we're going to instantiate. /// Needed so we can semi-generically instantiate the /// handler and call the method on it. /// </summary> public Type CallbackHandlerType { get; set; } /// <summary> /// Constructor to pass in the two required components we /// need to create an instance of our handler. /// </summary> /// <param name="methodName"></param> /// <param name="callbackHandlerType"></param> public CallbackHandlerRouteHandler(string methodName, Type callbackHandlerType) { MethodName = methodName; CallbackHandlerType = callbackHandlerType; } /// <summary> /// Retrieves an Http Handler based on the type specified in the constructor /// </summary> /// <param name="requestContext"></param> /// <returns></returns> IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; // If we're dealing with a Callback Handler // pass the RouteData for this route to the Handler if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; } /// <summary> /// Generic method to register all routes from a CallbackHandler /// that have RouteUrls defined on the [CallbackMethod] attribute /// </summary> /// <typeparam name="TCallbackHandler">CallbackHandler Type</typeparam> /// <param name="routes"></param> public static void RegisterRoutes<TCallbackHandler>(RouteCollection routes) { // find all methods var methods = typeof(TCallbackHandler).GetMethods(BindingFlags.Instance | BindingFlags.Public); foreach (var method in methods) { var attrs = method.GetCustomAttributes(typeof(CallbackMethodAttribute), false); if (attrs.Length < 1) continue; CallbackMethodAttribute attr = attrs[0] as CallbackMethodAttribute; if (string.IsNullOrEmpty(attr.RouteUrl)) continue; // Add the route routes.Add(method.Name, new Route(attr.RouteUrl, new CallbackHandlerRouteHandler(method.Name, typeof(TCallbackHandler)))); } } } The RouteHandler implements IRouteHandler, and its responsibility via the GetHandler method is to create an HttpHandler based on the route data. When ASP.NET calls GetHandler it passes a requestContext parameter which includes a requestContext.RouteData property. This parameter holds the current request’s route data as well as an instance of the current RouteHandler. If you look at GetHttpHandler() you can see that the code creates an instance of the handler we are interested in and then sets the RouteData property on the handler. This is how you can pass the current request’s RouteData to the handler. The RouteData object also has a RouteData.RouteHandler property that is also available to the Handler later, which is useful in order to get additional information about the current route. In our case here the RouteHandler includes a MethodName property that identifies the method to execute in the handler since that value no longer comes from the URL so we need to figure out the method name some other way. The method name is mapped explicitly when the RouteHandler is created and here the static method that auto-registers all CallbackMethods with RouteUrls sets the method name when it creates the routes while reflecting over the methods (more on this in a minute). The important point here is that you can attach additional properties to the RouteHandler and you can then later access the RouteHandler and its properties later in the Handler to pick up these custom values. This is a crucial feature in that the RouteHandler serves in passing additional context to the handler so it knows what actions to perform. The automatic route registration is handled by the static RegisterRoutes<TCallbackHandler> method. This method is generic and totally reusable for any CallbackHandler type handler. To register a CallbackHandler and any RouteUrls it has defined you simple use code like this in Application_Start (or other application startup code):protected void Application_Start(object sender, EventArgs e) { // Register Routes for RestService CallbackHandlerRouteHandler.RegisterRoutes<RestService>(RouteTable.Routes); } If you have multiple CallbackHandler style services you can make multiple calls to RegisterRoutes for each of the service types. RegisterRoutes internally uses reflection to run through all the methods of the Handler, looking for CallbackMethod attributes and whether a RouteUrl is specified. If it is a new instance of a CallbackHandlerRouteHandler is created and the name of the method and the type are set. routes.Add(method.Name, new Route(attr.RouteUrl, new CallbackHandlerRouteHandler(method.Name, typeof(TCallbackHandler) )) ); While the routing with CallbackHandlerRouteHandler is set up automatically for all methods that use the RouteUrl attribute, you can also use code to hook up those routes manually and skip using the attribute. The code for this is straightforward and just requires that you manually map each individual route to each method you want a routed: protected void Application_Start(objectsender, EventArgs e){ RegisterRoutes(RouteTable.Routes);}void RegisterRoutes(RouteCollection routes) { routes.Add("StockQuote Route",new Route("StockQuote/{symbol}", new CallbackHandlerRouteHandler("GetStockQuote",typeof(RestService) ) ) ); routes.Add("StockQuotes Route",new Route("StockQuotes/{symbolList}", new CallbackHandlerRouteHandler("GetStockQuotes",typeof(RestService) ) ) );}I think it’s clearly easier to have CallbackHandlerRouteHandler.RegisterRoutes() do this automatically for you based on RouteUrl attributes, but some people have a real aversion to attaching logic via attributes. Just realize that the option to manually create your routes is available as well. Using the RouteData in the Handler A RouteHandler’s responsibility is to create an HttpHandler and as mentioned earlier, natively IHttpHandler doesn’t have any support for RouteData. In order to utilize RouteData in your handler code you have to pass the RouteData to the handler. In my CallbackHandlerRouteHandler when it creates the HttpHandler instance it creates the instance and then assigns the custom RouteData property on the handler:IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; Again this only works if you actually add a RouteData property to your handler explicitly as I did in my CallbackHandler implementation:/// <summary> /// Optionally store RouteData on this handler /// so we can access it internally /// </summary> public RouteData RouteData {get; set; } and the RouteHandler needs to set it when it creates the handler instance. Once you have the route data in your handler you can access Route Keys and Values and also the RouteHandler. Since my RouteHandler has a custom property for the MethodName to retrieve it from within the handler I can do something like this now to retrieve the MethodName (this example is actually not in the handler but target is an instance pass to the processor): // check for Route Data method name if (target is CallbackHandler) { var routeData = ((CallbackHandler)target).RouteData; if (routeData != null) methodToCall = ((CallbackHandlerRouteHandler)routeData.RouteHandler).MethodName; } When I need to access the dynamic values in the route ( symbol in StockQuote/{symbol}) I can retrieve it easily with the Values collection (RouteData.Values["symbol"]). In my CallbackHandler processing logic I’m basically looking for matching parameter names to Route parameters: // look for parameters in the routeif(routeData != null){ string parmString = routeData.Values[parameter.Name] as string; adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType);} And with that we’ve come full circle. We’ve created a custom RouteHandler() that passes the RouteData to the handler it creates. We’ve registered our routes to use the RouteHandler, and we’ve utilized the route data in our handler. For completeness sake here’s the routine that executes a method call based on the parameters passed in and one of the options is to retrieve the inbound parameters off RouteData (as well as from POST data or QueryString parameters):internal object ExecuteMethod(string method, object target, string[] parameters, CallbackMethodParameterType paramType, ref CallbackMethodAttribute callbackMethodAttribute) { HttpRequest Request = HttpContext.Current.Request; object Result = null; // Stores parsed parameters (from string JSON or QUeryString Values) object[] adjustedParms = null; Type PageType = target.GetType(); MethodInfo MI = PageType.GetMethod(method, BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic); if (MI == null) throw new InvalidOperationException("Invalid Server Method."); object[] methods = MI.GetCustomAttributes(typeof(CallbackMethodAttribute), false); if (methods.Length < 1) throw new InvalidOperationException("Server method is not accessible due to missing CallbackMethod attribute"); if (callbackMethodAttribute != null) callbackMethodAttribute = methods[0] as CallbackMethodAttribute; ParameterInfo[] parms = MI.GetParameters(); JSONSerializer serializer = new JSONSerializer(); RouteData routeData = null; if (target is CallbackHandler) routeData = ((CallbackHandler)target).RouteData; int parmCounter = 0; adjustedParms = new object[parms.Length]; foreach (ParameterInfo parameter in parms) { // Retrieve parameters out of QueryString or POST buffer if (parameters == null) { // look for parameters in the route if (routeData != null) { string parmString = routeData.Values[parameter.Name] as string; adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType); } // GET parameter are parsed as plain string values - no JSON encoding else if (HttpContext.Current.Request.HttpMethod == "GET") { // Look up the parameter by name string parmString = Request.QueryString[parameter.Name]; adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType); } // POST parameters are treated as methodParameters that are JSON encoded else if (paramType == CallbackMethodParameterType.Json) //string newVariable = methodParameters.GetValue(parmCounter) as string; adjustedParms[parmCounter] = serializer.Deserialize(Request.Params["parm" + (parmCounter + 1).ToString()], parameter.ParameterType); else adjustedParms[parmCounter] = SerializationUtils.DeSerializeObject( Request.Params["parm" + (parmCounter + 1).ToString()], parameter.ParameterType); } else if (paramType == CallbackMethodParameterType.Json) adjustedParms[parmCounter] = serializer.Deserialize(parameters[parmCounter], parameter.ParameterType); else adjustedParms[parmCounter] = SerializationUtils.DeSerializeObject(parameters[parmCounter], parameter.ParameterType); parmCounter++; } Result = MI.Invoke(target, adjustedParms); return Result; } The code basically uses Reflection to loop through all the parameters available on the method and tries to assign the parameters from RouteData, QueryString or POST variables. The parameters are converted into their appropriate types and then used to eventually make a Reflection based method call. What’s sweet is that the RouteData retrieval is just another option for dealing with the inbound data in this scenario and it adds exactly two lines of code plus the code to retrieve the MethodName I showed previously – a seriously low impact addition that adds a lot of extra value to this endpoint callback processing implementation. Debugging your Routes If you create a lot of routes it’s easy to run into Route conflicts where multiple routes have the same path and overlap with each other. This can be difficult to debug especially if you are using automatically generated routes like the routes created by CallbackHandlerRouteHandler.RegisterRoutes. Luckily there’s a tool that can help you out with this nicely. Phill Haack created a RouteDebugging tool you can download and add to your project. The easiest way to do this is to grab and add this to your project is to use NuGet (Add Library Package from your Project’s Reference Nodes): which adds a RouteDebug assembly to your project. Once installed you can easily debug your routes with this simple line of code which needs to be installed at application startup:protected void Application_Start(object sender, EventArgs e) { CallbackHandlerRouteHandler.RegisterRoutes<StockService>(RouteTable.Routes); // Debug your routes RouteDebug.RouteDebugger.RewriteRoutesForTesting(RouteTable.Routes); } Any routed URL then displays something like this: The screen shows you your current route data and all the routes that are mapped along with a flag that displays which route was actually matched. This is useful – if you have any overlap of routes you will be able to see which routes are triggered – the first one in the sequence wins. This tool has saved my ass on a few occasions – and with NuGet now it’s easy to add it to your project in a few seconds and then remove it when you’re done. Routing Around Custom routing seems slightly complicated on first blush due to its disconnected components of RouteHandler, route registration and mapping of custom handlers. But once you understand the relationship between a RouteHandler, the RouteData and how to pass it to a handler, utilizing of Routing becomes a lot easier as you can easily pass context from the registration to the RouteHandler and through to the HttpHandler. The most important thing to understand when building custom routing solutions is to figure out how to map URLs in such a way that the handler can figure out all the pieces it needs to process the request. This can be via URL routing parameters and as I did in my example by passing additional context information as part of the RouteHandler instance that provides the proper execution context. In my case this ‘context’ was the method name, but it could be an actual static value like an enum identifying an operation or category in an application. Basically user supplied data comes in through the url and static application internal data can be passed via RouteHandler property values. Routing can make your application URLs easier to read by non-techie types regardless of whether you’re building Service type or REST applications, or full on Web interfaces. Routing in ASP.NET 4.0 makes it possible to create just about any extensionless URLs you can dream up and custom RouteHanmdler References Sample ProjectIncludes the sample CallbackHandler service discussed here along with compiled versionsof the Westwind.Web and Westwind.Utilities assemblies. (requires .NET 4.0/VS 2010) West Wind Web Toolkit includes full implementation of CallbackHandler and the Routing Handler West Wind Web Toolkit Source CodeContains the full source code to the Westwind.Web and Westwind.Utilities assemblies usedin these samples. Includes the source described in the post.(Latest build in the Subversion Repository) CallbackHandler Source(Relevant code to this article tree in Westwind.Web assembly) JSONView FireFoxPluginA simple FireFox Plugin to easily view JSON data natively in FireFox.For IE you can use a registry hack to display JSON as raw text.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET AJAX HTTP

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Part 2–Load Testing In The Cloud

- by Tarun Arora

Welcome to Part 2, In Part 1 we discussed the advantages of creating a Test Rig in the cloud, the Azure edge and the Test Rig Topology we want to get to. In Part 2, Let’s start by understanding the components of Azure we’ll be making use of followed by manually putting them together to create the test rig, so… let’s get down dirty start setting up the Test Rig. What Components of Azure will I be using for building the Test Rig in the Cloud? To run the Test Agents we’ll make use of Windows Azure Compute and to enable communication between Test Controller and Test Agents we’ll make use of Windows Azure Connect. Azure Connect The Test Controller is on premise and the Test Agents are in the cloud (How will they talk?). To enable communication between the two, we’ll make use of Windows Azure Connect. With Windows Azure Connect, you can use a simple user interface to configure IPsec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. With this you can now join Windows Azure role instances to your domain, so that you can use your existing methods for domain authentication, name resolution, or other domain-wide maintenance actions. For more details refer to an overview of Windows Azure connect. A very useful video explaining everything you wanted to know about Windows Azure connect. Azure Compute Windows Azure compute provides developers a platform to host and manage applications in Microsoft’s data centres across the globe. A Windows Azure application is built from one or more components called ‘roles.’ Roles come in three different types: Web role, Worker role, and Virtual Machine (VM) role, we’ll be using the Worker role to set up the Test Agents. A very nice blog post discussing the difference between the 3 role types. Developers are free to use the .NET framework or other software that runs on Windows with the Worker role or Web role. Developers can also create applications using languages such as PHP and Java. More on Windows Azure Compute. Each Windows Azure compute instance represents a virtual server... Virtual Machine Size CPU Cores Memory Cost Per Hour Extra Small Shared 768 MB $0.04 Small 1 1.75 GB $0.12 Medium 2 3.50 GB $0.24 Large 4 7.00 GB $0.48 Extra Large 8 14.00 GB $0.96 You might want to review the Windows Azure Pricing FAQ. Let’s Get Started building the Test Rig… Configuration Machine Role Comments VM – 1 Domain Controller for Playpit.com On Premise VM – 2 TFS, Test Controller On Premise VM – 3 Test Agent Cloud In this blog post I would assume that you have the domain, Team Foundation Server and Test Controller Installed and set up already. If not, please refer to the TFS 2010 Installation Guide and this walkthrough on MSDN to set up your Test Controller. You can also download a preconfigured TFS 2010 VM from Brian Keller's blog, Brian also has some great hands on Labs on TFS 2010 that you may want to explore. I. Lets start building VM – 3: The Test Agent Download the Windows Azure SDK and Tools Open Visual Studio and create a new Windows Azure Project using the Cloud Template Choose the Worker Role for reasons explained in the earlier post The WorkerRole.cs implements the Run() and OnStart() methods, no code changes required. You should be able to compile the project and run it in the compute emulator (The compute emulator should have been installed as part of the Windows Azure Toolkit) on your local machine. We will only be making changes to WindowsAzureProject, open ServiceDefinition.csdef. Ensure that the vmsize is small (remember the cost chart above). Import the “Connect” module. I am importing the Connect module because I need to join the Worker role VM to the Playpit domain. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect"/> </Imports> </WorkerRole> </ServiceDefinition> Go to the ServiceConfiguration.Cloud.cscfg and note that settings with key ‘Microsoft.WindowsAzure.Plugins.Connect.%%%%’ have been added to the configuration file. This is because you decided to import the connect module. See the config below. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="1" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Let’s go step by step and understand all the highlighted parameters and where you can find the values for them. osFamily – By default this is set to 1 (Windows Server 2008 SP2). Change this to 2 if you want the Windows Server 2008 R2 operating system. The Advantage of using osFamily = “2” is that you get Powershell 2.0 rather than Powershell 1.0. In Powershell 2.0 you could simply use “powershell -ExecutionPolicy Unrestricted ./myscript.ps1” and it will work while in Powershell 1.0 you will have to change the registry key by including the following in your command file “reg add HKLM\Software\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell /v ExecutionPolicy /d Unrestricted /f” before you can execute any power shell. The other reason you might want to move to os2 is if you wanted IIS 7.5. Activation Token – To enable communication between the on premise machine and the Windows Azure Worker role VM both need to have the same token. Log on to Windows Azure Management Portal, click on Connect, click on Get Activation Token, this should give you the activation token, copy the activation token to the clipboard and paste it in the configuration file. Note – Later in the blog I’ll be showing you how to install connect on the on premise machine. EnableDomainJoin – Set the value to true, ofcourse we want to join the on windows azure worker role VM to the domain. DomainFQDN, DomainControllerFQDN, DomainAccountName, DomainPassword, DomainOU, Administrators – This information is specific to your domain. I have extracted this information from the ‘service manager’ and ‘Active Directory Users and Computers’. Also, i created a new Domain-OU namely ‘CloudInstances’ so all my cloud instances joined to my domain show up here, this is optional. You can encrypt the DomainPassword – refer to the instructions here. Or hold fire, I’ll be covering that when i come to certificates and encryption in the coming section. Now once you have filled all this information up, the configuration file should look something like below, <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> </ConfigurationSettings> </Role> </ServiceConfiguration> Next we will be enabling the Remote Desktop module in to the ServiceDefinition.csdef, we could make changes manually or allow a beautiful wizard to help us make changes. I prefer the second option. So right click on the Windows Azure project and choose Publish Now once you get the publish wizard, if you haven’t already you would be asked to import your Windows Azure subscription, this is simply the Msdn subscription activation key xml. Once you have done click Next to go to the Settings page and check ‘Enable Remote Desktop for all roles’. As soon as you do that you get another pop up asking you the details for the user that you would be logging in with (make sure you enter a reasonable expiry date, you do not want the user account to expire today). Notice the more information tag at the bottom, click that to get access to the certificate section. See screen shot below. From the drop down select the option to create a new certificate In the pop up window enter the friendly name for your certificate. In my case I entered ‘WAC – Test Rig’ and click ok. This will create a new certificate for you. Click on the view button to see the certificate details. Do you see the Thumbprint, this is the value that will go in the config file (very important). Now click on the Copy to File button to copy the certificate, we will need to import the certificate to the windows Azure Management portal later. So, make sure you save it a safe location. Click Finish and enter details of the user you would like to create with permissions for remote desktop access, once you have entered the details on the ‘Remote desktop configuration’ screen click on Ok. From the Publish Windows Azure Wizard screen press Cancel. Cancel because we don’t want to publish the role just yet and Yes because we want to save all the changes in the config file. Now if you go to the ServiceDefinition.csdef file you will see that the RemoteAccess and RemoteForwarder roles have been imported for you. <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="WorkerRole1" vmsize="Small"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="Connect" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> </WorkerRole> </ServiceDefinition> Now go to the ServiceConfiguration.Cloud.cscfg file and you see a whole bunch for setting “Microsoft.WindowsAzure.Plugins.RemoteAccess.%%%” values added for you. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="WindowsAzureProject2" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration" osFamily="2" osVersion="*"> <Role name="WorkerRole1"> <Instances count="1" /> <ConfigurationSettings> <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.ActivationToken" value="45f55fea-f194-4fbc-b36e-25604faac784" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Refresh" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.WaitForConnectivity" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Upgrade" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.EnableDomainJoin" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainFQDN" value="play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainControllerFQDN" value="WIN-KUDQMQFGQOL.play.pit.com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainAccountName" value="playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainPassword" value="************************" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainOU" value="OU=CloudInstances, DC=Play, DC=Pit, DC=com" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.Administrators" value="Playpit\Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.Connect.DomainSiteName" value="" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.Enabled" value="true" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountUsername" value="Administrator" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountEncryptedPassword" value="MIIBnQYJKoZIhvcNAQcDoIIBjjCCAYoCAQAxggFOMIIBSgIBADAyMB4xHDAaBgNVBAMME1dpbmRvd 3MgQXp1cmUgVG9vbHMCEGa+B46voeO5T305N7TSG9QwDQYJKoZIhvcNAQEBBQAEggEABg4ol5Xol66Ip6QKLbAPWdmD4ae ADZ7aKj6fg4D+ATr0DXBllZHG5Umwf+84Sj2nsPeCyrg3ZDQuxrfhSbdnJwuChKV6ukXdGjX0hlowJu/4dfH4jTJC7sBWS AKaEFU7CxvqYEAL1Hf9VPL5fW6HZVmq1z+qmm4ecGKSTOJ20Fptb463wcXgR8CWGa+1w9xqJ7UmmfGeGeCHQ4QGW0IDSBU6ccg vzF2ug8/FY60K1vrWaCYOhKkxD3YBs8U9X/kOB0yQm2Git0d5tFlIPCBT2AC57bgsAYncXfHvPesI0qs7VZyghk8LVa9g5IqaM Cp6cQ7rmY/dLsKBMkDcdBHuCTAzBgkqhkiG9w0BBwEwFAYIKoZIhvcNAwcECDRVifSXbA43gBApNrp40L1VTVZ1iGag+3O1" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountExpiration" value="2012-11-27T23:59:59.0000000+00:00" /> <Setting name="Microsoft.WindowsAzure.Plugins.RemoteForwarder.Enabled" value="true" /> </ConfigurationSettings> <Certificates> <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteAccess.PasswordEncryption" thumbprint="AA23016CF0BDFC344400B5B82706B608B92E4217" thumbprintAlgorithm="sha1" /> </Certificates> </Role> </ServiceConfiguration> Okay let’s look at them one at a time, Enabled - Yes, we would like to enable Remote Access. AccountUserName – This is the user name you entered while you were on the publish windows azure role screen, as detailed above. AccountEncrytedPassword – Try and decode that, the certificate is used to encrypt the password you specified for the user account. Remember earlier i said, either use the instructions or wait and i’ll be showing you encryption, now the user account i am using for rdp has the same password as my domain password, so i can simply copy the value of the AccountEncryptedPassword to the DomainPassword as well. AccountExpiration – This is the expiration as you specified in the wizard earlier, make sure your account does not expire today. Remote Forwarder – Check out the documentation, below is how I understand it, -- One role in an application that implements a remote desktop connection must import the RemoteForwarder module. The two modules work together to enable the remote desktop connections to role instances. -- If you have multiple roles defined in the service model, it does not matter which role you add the RemoteForwarder module to, but you must add it to only one of the role definitions. Certificate – Remember the certificate thumbprint from the wizard, the on premise machine and windows azure role machine that need to speak to each other must have the same thumbprint. More on that when we install Windows Azure connect Endpoints on the on premise machine. As i said earlier, in this blog post, I’ll be showing you the manual process so i won’t be scripting any star up tasks to install the test agent or register the test agent with the TFS Server. I’ll be showing you all this cool stuff in the next blog post, that’s because it’s important to understand the manual side of it, it becomes easier for you to troubleshoot in case something fails. Having said that, the changes we have made are sufficient to spin up the Windows Azure Worker Role aka Test Agent VM, have it connected with the play.pit.com domain and have remote access enabled on it. Before we deploy the Test Agent VM we need to set up Windows Azure Connect on the TFS Server. II. Windows Azure Connect: Setting up Connect on VM – 2 i.e. TFS & Test Controller Glad you made it so far, now to enable communication between the on premise TFS/Test Controller and Azure-ed Test Agent we need to enable communication. We have set up the Azure connect module in the Test Agent configuration, now the connect end points need to be enabled on the on premise machines, let’s have a look at how we can do this. Log on to VM – 2 running the TFS Server and Test Controller Log on to the Windows Azure Management Portal and click on Virtual Network Click on Virtual Network, if you already have a subscription you should see the below screen shot, if not, you would be asked to complete the subscription first Click on Install Local Endpoints from the top left on the panel and you get a url appended with a token id in it, remember the token i showed you earlier, in theory the token you get here should match the token you added to the Test Agent config file. Copy the url to the clip board and paste it in IE explorer (important, the installation at present only works out of IE and you need to have cookies enabled in order to complete the installation). As stated in the pop up, you can NOT download and run the software later, you need to run it as is, since it contains a token. Once the installation completes you should see the Windows Azure connect icon in the system tray. Right click the Azure Connect icon, choose Diagnostics and refer to this link for diagnostic detail terminology. NOTE – Unfortunately I could not see the Windows Azure connect icon in the system tray, a bit of binging with Google revealed that the azure connect icon is only shown when the ‘Windows Azure Connect Endpoint’ Service is started. So go to services.msc and make sure that the service is started, if not start it, unfortunately again, the service did not start for me on a manual start and i realised that one of the dependant services was disabled, you can look at the service dependencies and start them and then start windows azure connect. Bottom line, you need to start Windows Azure connect service before you can proceed. Please refer here on MSDN for more on Troubleshooting Windows Azure connect. (Follow the next step as well) Now go back to the Windows Azure Management Portal and from Groups and Roles create a new group, lets call it ‘Test Rig’. Make sure you add the VM – 2 (the TFS Server VM where you just installed the endpoint). Now if you go back to the Azure Connect icon in the system tray and click ‘Refresh Policy’ you will notice that the disconnected status of the icon should change to ready for connection. III. Importing Certificate in to Windows Azure Management Portal But before that you need to import the certificate you created in Step I in to the Windows Azure Management Portal. Log on to the Windows Azure Management Portal and click on ‘Hosted Services, Storage Accounts & CDN’ and then ‘Management Certificates’ followed by Add Certificates as shown in the screen shot below Browse to the location where you saved the certificate earlier, remember… Refer to Step I in case you forgot. Now you should be able to see the imported certificate here, make sure the thumbprint of the certificate matches the one you inserted in the config files IV. Publish Windows Azure Worker Role aka Test Agent Having completed I, II and III, you are ready to publish the Test Agent VM – 3 to the cloud. Go to Visual Studio and right click the Windows Azure project and select Publish. Verify the infomration in the wizard, from the advanced settings tab, you can also enabled capture of intellitrace or profiling information. Click Next and Click Publish! From the view menu bar select the Windows Azure Activity Log window. Now you should be able to see the deployment progress in real time. In the Windows Azure Management Portal, you should also be able to see the progress of creation of a new Worker Role. Once the deployment is complete you should be able to RDP (go to run prompt type mstsc and in the pop up the machine name) in to the Test Agent Worker Role VM from the Playpit network using the domain admin user account. In case you are unable to log in to the Test Agent using the domain admin user account it means the process of joining the Test Agent to the domain has failed! But the good news is, because you imported the connect module, you can connect to the Test Agent machine using Windows Azure Management Portal and troubleshoot the reason for failure, you will be able to log in with the user name and password you specified in the config file for the keys ‘RemoteAccess.AccountUsername, RemoteAccess.EncryptedPassword (just that enter the password unencrypted)’, fix it or manually join the machine to the domain. Once you have managed to Join the Test Agent VM to the Domain move to the next step. So, log in to the Test Agent Worker Role VM with the Playpit Domain Administrator and verify that you can log in, the machine is connected to the domain and the connect service is successfully running. If yes, give your self a pat on the back, you are 80% mission accomplished! Go to the Windows Azure Management Portal and click on Virtual Network, click on Groups and Roles and click on Test Rig, click Edit Group, the edit the Test Rig group you created earlier. In the Connect to section, click on Add to select the worker role you have just deployed. Also, check the ‘Allow connections between endpoints in the group’ with this you will enable to communication between test controller and test agents and test agents/test agents. Click Save. Now, you are ready to deploy the Test Agent software on the Worker Role Test Agent VM and configure it to work with the Test Controller. V. Configuring VM – 3: Installing Test Agent and Associating Test Agent to Controller Log in to the Worker Role Test Agent VM that you have just successfully deployed, make sure you log in with the domain administrator account. Download the All Agents software from MSDN, ‘en_visual_studio_agents_2010_x86_x64_dvd_509679.iso’, extract the iso and navigate to where you have extracted the iso. In my case, i have extracted the iso to “C:\Resources\Temp\VsAgentSetup”. Open the Test Agent folder and double click on setup.exe. Once you have installed the Test Agent you should reach the configuration window. If you face any issues installing TFS Test Agent on the VM, refer to the walkthrough on MSDN. Once you have successfully installed the Test Agent software you will need to configure the test agent. Right click the test agent configuration tool and run as a different user. i.e. an Administrator. This is really to run the configuration wizard with elevated privileges (you might have UAC block something's otherwise). In the run options, you can select ‘service’ you do not need to run the agent as interactive un less you are running coded UI tests. I have specified the domain administrator to connect to the TFS Test Controller. In real life, i would never do that, i would create a separate test user service account for this purpose. But for the blog post, we are using the most powerful user so that any policies or restrictions don’t block you. Click the Apply Settings button and you should be all green! If not, the summary usually gives helpful error messages that you can resolve and proceed. As per my experience, you may run in to either a permission or a firewall blocking communication issue. And now the moment of truth! Go to VM –2 open up Visual Studio and from the Test Menu select Manage Test Controller Mission Accomplished! You should be able to see the Test Agent that you have just configured here, VI. Creating and Running Load Tests on your brand new Azure-ed Test Rig I have various blog posts on Performance Testing with Visual Studio Ultimate, you can follow the links and videos below, Blog Posts: - Part 1 – Performance Testing using Visual Studio 2010 Ultimate - Part 2 – Performance Testing using Visual Studio 2010 Ultimate - Part 3 – Performance Testing using Visual Studio 2010 Ultimate Videos: - Test Tools Configuration & Settings in Visual Studio - Why & How to Record Web Performance Tests in Visual Studio Ultimate - Goal Driven Load Testing using Visual Studio Ultimate Now that you have created your load tests, there is one last change you need to make before you can run the tests on your Azure Test Rig, create a new Test settings file, and change the Test Execution method to ‘Remote Execution’ and select the test controller you have configured the Worker Role Test Agent against in our case VM – 2 So, go on, fire off a test run and see the results of the test being executed on the Azur-ed Test Rig. Review and What’s next? A quick recap of the benefits of running the Test Rig in the cloud and what i will be covering in the next blog post AND I would love to hear your feedback! Advantages Utilizing the power of Azure compute to run a heavy virtual user load. Benefiting from the Azure flexibility, destroy Test Agents when not in use, takes < 25 minutes to spin up a new Test Agent. Most important test Network Latency, (network latency and speed of connection are two different things – usually network latency is very hard to test), by placing the Test Agents in Microsoft Data centres around the globe, one can actually test the lag in transferring the bytes not because of a slow connection but because the page has been requested from the other side of the globe. Next Steps The process of spinning up the Test Agents in windows Azure is not 100% automated. I am working on the Worker process and power shell scripts to make the role deployment, unattended install of test agent software and registration of the test agent to the test controller automated. In the next blog post I will show you how to make the complete process unattended and automated. Remember to subscribe to http://feeds.feedburner.com/TarunArora. Hope you enjoyed this post, I would love to hear your feedback! If you have any recommendations on things that I should consider or any questions or feedback, feel free to leave a comment. See you in Part III. Share this post : CodeProject

Read the article

NetBackup with VSS and Instant Recovery - Failing to delete old snapshots

- by Jonathan Bourke

We are attempting to implement Microsoft VSS for snap-shotting in our NetBackup 6.5.3.1 environment. The clients are both 32 & 64 bit Windows 2003 Server. Snapshot parameters are: Instant recovery is enabled Maximum snapshots = 1 Provider type = 1 (System) Snapshot attribute = 1 (Differential) All backups successfully complete, and VSS shadows are successfully created both for the snapshot backup and for the open files (shadow copy components). The Issue: NetBackup is not clearing or overwriting old snapshots with each successive backup. When we list shadows, and shadow storage, it is increasing and increasing. IT is not honouring the Maximum Snapshot setting. The Logs: The bpfis log doesn’t really appear to show any errors other than for methods which we are not employing (VxVM, Flashsnap, etc.). A section is as follows: 11:54:10.744 [348.4724] <2> logparams: D:\Program Files\Veritas\NetBackup\bin\bpfis.exe delete -nbu -id htpststr001.san.mgmt.det_1248918143 -bpstart_to 300 -bpend_to 300 -clnt htpststr001.san.mgmt.det 11:54:10.744 [348.4724] <4> bpfis: INF - BACKUP START 348 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: FlashSnap, type: FIM, function: FlashSnap_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: FlashSnap_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: vxvm, type: FIM, function: vxvm_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vxvm_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <4> onlfi_thaw: Thawing C:\ using snapshot method VSS. 11:54:11.713 [348.4724] <2> onlfi_vfms_logf: vfm_thaw: delete snapshot ... 11:54:11.744 [348.4724] <2> onlfi_vfms_logf: snapshot services: emcclariionfi:Thu Jul 30 2009 11:54:11.744000 <Thread id - 4724> Unable to import any login credentials for any appliances. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpevafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> CHpEvaPlugin::init: CLI tool is not installed. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpmsafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> No array mangement credentials are available in configuration file. 11:54:13.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:13.806 [348.4724] <4> onlfi_thaw: Thawing D:\ using snapshot method VSS. 11:54:15.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0.fiid 11:54:19.853 [348.4724] <4> bpfis: INF - EXIT STATUS 0: the requested operation was successfully completed The Question: Has anyone any experience of NetBackup / VSS not clearing snapshots after backups? We will ultimately be using a HP EVA for the snapshots, but we want to ensure correct functioning at a VSS level before we go further. Regards, Jonathan (PS: Question previously posted by my colleague on entsupport.symantec.com)

Read the article

NetBackup with VSS and Instant Recovery - Failing to delete old snapshots

- by Jonathan Bourke

We are attempting to implement Microsoft VSS for snap-shotting in our NetBackup 6.5.3.1 environment. The clients are both 32 & 64 bit Windows 2003 Server. Snapshot parameters are: Instant recovery is enabled Maximum snapshots = 1 Provider type = 1 (System) Snapshot attribute = 1 (Differential) All backups successfully complete, and VSS shadows are successfully created both for the snapshot backup and for the open files (shadow copy components). The Issue: NetBackup is not clearing or overwriting old snapshots with each successive backup. When we list shadows, and shadow storage, it is increasing and increasing. IT is not honouring the Maximum Snapshot setting. The Logs: The bpfis log doesn’t really appear to show any errors other than for methods which we are not employing (VxVM, Flashsnap, etc.). A section is as follows: 11:54:10.744 [348.4724] <2> logparams: D:\Program Files\Veritas\NetBackup\bin\bpfis.exe delete -nbu -id htpststr001.san.mgmt.det_1248918143 -bpstart_to 300 -bpend_to 300 -clnt htpststr001.san.mgmt.det 11:54:10.744 [348.4724] <4> bpfis: INF - BACKUP START 348 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: FlashSnap, type: FIM, function: FlashSnap_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: FlashSnap_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS error 10; see following messages: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: Non-fatal method error was reported 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vfm_configure_fi_one: method: vxvm, type: FIM, function: vxvm_init 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: VfMS method error 3; see following message: 11:54:11.713 [348.4724] <8> onlfi_initialize_vfms: vxvm_init: Veritas Volume Manager not installed. 11:54:11.713 [348.4724] <4> onlfi_thaw: Thawing C:\ using snapshot method VSS. 11:54:11.713 [348.4724] <2> onlfi_vfms_logf: vfm_thaw: delete snapshot ... 11:54:11.744 [348.4724] <2> onlfi_vfms_logf: snapshot services: emcclariionfi:Thu Jul 30 2009 11:54:11.744000 <Thread id - 4724> Unable to import any login credentials for any appliances. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpevafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> CHpEvaPlugin::init: CLI tool is not installed. 11:54:11.760 [348.4724] <2> onlfi_vfms_logf: snapshot services: hpmsafi:Thu Jul 30 2009 11:54:11.760000 <Thread id - 4724> No array mangement credentials are available in configuration file. 11:54:13.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:13.806 [348.4724] <4> onlfi_thaw: Thawing D:\ using snapshot method VSS. 11:54:15.806 [348.4724] <4> onlfi_thaw: do_thaw return value: 0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0 11:54:19.806 [348.4724] <2> fis_delete_id: removing D:\Program Files\Veritas\NetBackup\online_util\fi_cntl\bpfis.fim.htpststr001.san.mgmt.det_1248918143.0.fiid 11:54:19.853 [348.4724] <4> bpfis: INF - EXIT STATUS 0: the requested operation was successfully completed The Question: Has anyone any experience of NetBackup / VSS not clearing snapshots after backups? We will ultimately be using a HP EVA for the snapshots, but we want to ensure correct functioning at a VSS level before we go further. Regards, Jonathan (PS: Question previously posted by my colleague on entsupport.symantec.com)

Read the article

Week in Geek: USDA Chooses Microsoft for Cloud Services Edition

- by Asian Angel

This week we learned how to create geeky LED holiday lights with old bottles, dig deeper in Windows Defrag via the command prompt, use Google Chrome’s drag/drop feature to upload files easier, find great gift recommendations by looking through the How-To Geek holiday gift guide, and have fun adding Merry Christmas fonts to our computers. Photo by ntr23. Random Geek Links It has been a busy week, so we have extra news link goodness with information that is good for you to know. USDA making the move to Microsoft The U.S. Department of Agriculture has announced that it has chosen Microsoft to host things like e-mail, instant messaging, and collaboration through the software giant’s Business Productivity Online Suite. Google says it was cut off from USDA project bid Google is claiming that it was not given a chance to bid on a cloud-computing project for the U.S. Department of Agriculture, for which the contract was awarded to rival Microsoft. Apache is being forced into a Java Fork When Oracle rolled over Apache and Google’s objections to its Java plans in December, the scene was set for Apache to leave and, eventually, force a Java code fork. Tumblr explains daylong outage After experiencing an outage that started on Sunday afternoon and stretched through most of the day yesterday, Tumblr has explained what happened. Google demos Chrome OS, launches pilot program During a press briefing this week in San Francisco, Google launched the Chrome application store and demonstrated Chrome OS, its browser-centric netbook operating system. Don’t expect Spotify in U.S. this holiday season As of last week, Spotify had yet to sign a single licensing deal with a major label, after spending more than a year negotiating, multiple music sources told CNET. December 2010 Patch Tuesday will come with most bulletins ever According to the Microsoft Security Response Center, Microsoft will issue 17 Security Bulletins addressing 40 vulnerabilities on Tuesday, December 14. It will also host a webcast to address customer questions the following day. Hacker plants back door in Symbian firmware Indian hacker Atul Alex has had a look at the firmware for Symbian S60 smartphones and come up with a back door for it. PC quarantines raise tough complexities The concept of quarantining PCs to prevent widespread infection is “interesting, but difficult to implement, with far too many problems”, said security experts. Symantec: DDoS attacks hard to defend It has surfaced that the distributed denial of service (DDoS) attacks on Visa and MasterCard Web sites on Wednesday were carried out by a toolkit known as low orbit ion cannon (LOIC). Web Sockets and the risks of unfinished standards Enthusiasm for a promising new standard called Web Sockets has quickly cooled in some quarters as a potential security problem led some browser makers to hastily postpone support. Internet Explorer 9 to get tracking protection Microsoft is making changes to Internet Explorer 9’s security features that will better enable users to keep sites from tracking their activity across browsing sessions. NASA sold PCs with sensitive data NASA failed to remove sensitive data from computers that it sold, according to an audit report released this week. Cybercrooks create fake Amazon receipts The bad guys have created yet another online scam, this one involving fake Amazon receipts. World of Warcraft character move fees waived Until December 22, Blizzard will allow free realm transfers from 25 highly populated servers to alleviate log-in queues or performance issues. (The free transfers are one-way and one-time only.) SpaceX Dragon reaches orbit atop a Falcon with a fiery tail The Space Exploration Technologies corporation has become the first nongovernmental entity to put a vehicle into low Earth orbit. Geek Video of the Week If birds have wings, then why are the Angry Birds using slingshots? Photo by Dorkly Bits. Wait… Birds have Wings, Why are the Angry Ones Using Slingshots? Sysadmin Geek Tips How To Setup Email Alerts on Linux Using Gmail or SMTP Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Random TinyHacker Links Red Panda Webcam Support Firefox and the Knoxville Zoo’s Red Panda program. Christmas Icons (Icons we like) Superb set of holiday icons by lgp85 at deviantArt. Download the .zip and use as .png or convert to .ico at Convertico.com or with tiny app Imagicon. Super User Questions Enjoy reading the great answers to this week’s popular questions from Super User Useful USB boot disks? DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder? What are other ways to backup my files if I do not have an external drive? Anti virus what is the difference between these all? How can I block all Facebook elements/content? How-To Geek Weekly Article Recap Have you had a busy week between work and preparing for the holidays? Get caught up on your HTG reading with our hottest articles of the week. 20 Windows Keyboard Shortcuts You Might Not Know The 50 Best Registry Hacks that Make Windows Better LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology HTG Explains: Which Linux File System Should You Choose? How to Use and Customize Google Chrome Web Apps One Year Ago on How-To Geek This week’s batch of retro geeky goodness is all about customizing Windows 7. ClassicShell Adds Classic Start Menu and Explorer Features to Windows 7 Get an Aero-Styled Classic Start Menu in Windows 7 Customize the Windows 7 Logon Screen Get the Classic Style Network Activity Indicator Back in Windows 7 How To Enable Check Boxes for Items In Windows 7 The Geek Note We would like you to join us in welcoming Jason Fitzpatrick to the writing staff here at How-To Geek. He started with us this past week, so take some time to read through his articles about the Wii, Kindle, & PlayStation 2 Peripherals and leave a friendly comment to say “Hi”! Got a great tip to share? Make sure to send it in to us at [email protected]. Photo by real00. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

Read the article

Conversation as User Assistance

- by ultan o'broin

Applications User Experience members (Erika Web, Laurie Pattison, and I) attended the User Assistance Europe Conference in Stockholm, Sweden. We were impressed with the thought leadership and practical application of ideas in Anne Gentle's keynote address "Social Web Strategies for Documentation". After the conference, we spoke with Anne to explore the ideas further. Anne Gentle (left) with Applications User Experience Senior Director Laurie Pattison In Anne's book called Conversation and Community: The Social Web for Documentation, she explains how user assistance is undergoing a seismic shift. The direction is away from the old print manuals and online help concept towards a web-based, user community-driven solution using social media tools. User experience professionals now have a vast range of such tools to start and nurture this "conversation": blogs, wikis, forums, social networking sites, microblogging systems, image and video sharing sites, virtual worlds, podcasts, instant messaging, mashups, and so on. That user communities are a rich source of user assistance is not a surprise, but the extent of available assistance is. For example, we know from the Consortium for Service Innovation that there has been an 'explosion' of user-generated content on the web. User-initiated community conversations provide as much as 30 times the number of official help desk solutions for consortium members! The growing reliance on user community solutions is clearly a user experience issue. Anne says that user assistance as conversation "means getting closer to users and helping them perform well. User-centered design has been touted as one of the most important ideas developed in the last 20 years of workplace writing. Now writers can take the idea of user-centered design a step further by starting conversations with users and enabling user assistance in interactions." Some of Anne's favorite examples of this paradigm shift from the world of traditional documentation to community conversation include: Writer Bob Bringhurst's blog about Adobe InDesign and InCopy products and Adobe's community help The Microsoft Development Network Community Center ·The former Sun (now Oracle) OpenDS wiki, NetBeans Ruby and other community approaches to engage diverse audiences using screencasts, wikis, and blogs. Cisco's customer support wiki, EMC's community, as well as Symantec and Intuit's approaches The efforts of Ubuntu, Mozilla, and the FLOSS community generally Adobe Writer Bob Bringhurst's Blog Oracle is not without a user community conversation too. Besides the community discussions and blogs around documentation offerings, we have the My Oracle Support Community forums, Oracle Technology Network (OTN) communities, wiki, blogs, and so on. We have the great work done by our user groups and customer councils. Employees like David Haimes reach out, and enthusiastic non-employee gurus like Chet Justice (OracleNerd), Floyd Teter and Eddie Awad provide great "how-to" information too. But what does this paradigm shift mean for existing technical writers as users turn away from the traditional printable PDF manual deliverables? We asked Anne after the conference. The writer role becomes one of conversation initiator or enabler. The role evolves, along with the process, as the users define their concept of user assistance and terms of engagement with the product instead of having it pre-determined. It is largely a case now of "inventing the job while you're doing it, instead of being hired for it" Anne said. There is less emphasis on formal titles. Anne mentions that her own title "Content Stacker" at OpenStack; others use titles such as "Content Curator" or "Community Lead". However, the role remains one essentially about communications, "but of a new type--interacting with users, moderating, curating content, instead of sitting down to write a manual from start to finish." Clearly then, this role is open to more than professional technical writers. Product managers who write blogs, developers who moderate forums, support professionals who update wikis, rock star programmers with a penchant for YouTube are ideal. Anyone with the product knowledge, empathy for the user, and flair for relationships on the social web can join in. Some even perform these roles already but do not realize it. Anne feels the technical communicator space will move from hiring new community conversation professionals (who are already active in the space through blogging, tweets, wikis, and so on) to retraining some existing writers over time. Our own research reveals that the established proponents of community user assistance even set employee performance objectives for internal content curators about the amount of community content delivered by people outside the organization! To take advantage of the conversations on the web as user assistance, enterprises must first establish where on the spectrum their community lies. "What is the line between community willingness to contribute and the enterprise objectives?" Anne asked. "The relationship with users must be managed and also measured." Anne believes that the process can start with a "just do it" approach. Begin by reaching out to existing user groups, individual bloggers and tweeters, forum posters, early adopter program participants, conference attendees, customer advisory board members, and so on. Use analytical tools to measure the level of conversation about your products and services to show a return on investment (ROI), winning management support. Anne emphasized that success with the community model is dependent on lowering the technical and motivational barriers so that users can readily contribute to the conversation. Simple tools must be provided, and guidelines, if any, must be straightforward but not mandatory. The conversational approach is one where traditional style and branding guides do not necessarily apply. Tools and infrastructure help users to create content easily, to search and find the information online, read it, rate it, translate it, and participate further in the content's evolution. Recognizing contributors by using ratings on forums, giving out Twitter kudos, conference invitations, visits to headquarters, free products, preview releases, and so on, also encourages the adoption of the conversation model. The move to conversation as user assistance is not free, but there is a business ROI. The conversational model means that customer service is enhanced, as user experience moves from a functional to a valued, emotional level. Studies show a positive correlation between loyalty and financial performance (Consortium for Service Innovation, 2010), and as customer experience and loyalty become key differentiators, user experience professionals cannot explore the model's possibilities. The digital universe (measured at 1.2 million petabytes in 2010) is doubling every 12 to 18 months, and 70 percent of that universe consists of user-generated content (IDC, 2010). Conversation as user assistance cannot be ignored but must be embraced. It is a time to manage for abundance, not scarcity. Besides, the conversation approach certainly sounds more interesting, rewarding, and fun than the traditional model! I would like to thank Anne for her time and thoughts, and recommend that all user assistance professionals read her book. You can follow Anne on Twitter at: http://www.twitter.com/annegentle. Oracle's Acrolinx IQ deployment was used to author this article.

Read the article

Community Conversation

- by ultan o'broin

Applications User Experience members (Erika Webb, Laurie Pattison, and I) attended the User Assistance Europe Conference in Stockholm, Sweden. We were impressed with the thought leadership and practical application of ideas in Anne Gentle's keynote address "Social Web Strategies for Documentation". After the conference, we spoke with Anne to explore the ideas further. Applications User Experience Senior Director Laurie Pattison (left) with Anne Gentle at the User Assistance Europe Conference In Anne's book called Conversation and Community: The Social Web for Documentation, she explains how user assistance is undergoing a seismic shift. The direction is away from the old print manuals and online help concept towards a web-based, user community-driven solution using social media tools. User experience professionals now have a vast range of such tools to start and nurture this "conversation": blogs, wikis, forums, social networking sites, microblogging systems, image and video sharing sites, virtual worlds, podcasts, instant messaging, mashups, and so on. That user communities are a rich source of user assistance is not a surprise, but the extent of available assistance is. For example, we know from the Consortium for Service Innovation that there has been an 'explosion' of user-generated content on the web. User-initiated community conversations provide as much as 30 times the number of official help desk solutions for consortium members! The growing reliance on user community solutions is clearly a user experience issue. Anne says that user assistance as conversation "means getting closer to users and helping them perform well. User-centered design has been touted as one of the most important ideas developed in the last 20 years of workplace writing. Now writers can take the idea of user-centered design a step further by starting conversations with users and enabling user assistance in interactions." Some of Anne's favorite examples of this paradigm shift from the world of traditional documentation to community conversation include: * Writer Bob Bringhurst's blog about Adobe InDesign and InCopy products and Adobe's community help * The Microsoft Development Network Community Center * ·The former Sun (now Oracle) OpenDS wiki, NetBeans Ruby and other community approaches to engage diverse audiences using screencasts, wikis, and blogs. * Cisco's customer support wiki, EMC's community, as well as Symantec and Intuit's approaches * The efforts of Ubuntu, Mozilla, and the FLOSS community generally Adobe Writer Bob Bringhurst's Blog Oracle is not without a user community conversation too. Besides the community discussions and blogs around documentation offerings, we have the My Oracle Support Community forums, Oracle Technology Network (OTN) communities, wiki, blogs, and so on. We have the great work done by our user groups and customer councils. Employees like David Haimes are reaching out, and enthusiastic non-employee gurus like Chet Justice (OracleNerd), Floyd Teter and Eddie Awad provide great "how-to" information too. But what does this paradigm shift mean for existing technical writers as users turn away from the traditional printable PDF manual deliverables? We asked Anne after the conference. The writer role becomes one of conversation initiator or enabler. The role evolves, along with the process, as the users define their concept of user assistance and terms of engagement with the product instead of having it pre-determined. It is largely a case now of "inventing the job while you're doing it, instead of being hired for it" Anne said. There is less emphasis on formal titles. Anne mentions that her own title "Content Stacker" at OpenStack; others use titles such as "Content Curator" or "Community Lead". However, the role remains one essentially about communications, "but of a new type--interacting with users, moderating, curating content, instead of sitting down to write a manual from start to finish." Clearly then, this role is open to more than professional technical writers. Product managers who write blogs, developers who moderate forums, support professionals who update wikis, rock star programmers with a penchant for YouTube are ideal. Anyone with the product knowledge, empathy for the user, and flair for relationships on the social web can join in. Some even perform these roles already but do not realize it. Anne feels the technical communicator space will move from hiring new community conversation professionals (who are already active in the space through blogging, tweets, wikis, and so on) to retraining some existing writers over time. Our own research reveals that the established proponents of community user assistance even set employee performance objectives for internal content curators about the amount of community content delivered by people outside the organization! To take advantage of the conversations on the web as user assistance, enterprises must first establish where on the spectrum their community lies. "What is the line between community willingness to contribute and the enterprise objectives?" Anne asked. "The relationship with users must be managed and also measured." Anne believes that the process can start with a "just do it" approach. Begin by reaching out to existing user groups, individual bloggers and tweeters, forum posters, early adopter program participants, conference attendees, customer advisory board members, and so on. Use analytical tools to measure the level of conversation about your products and services to show a return on investment (ROI), winning management support. Anne emphasized that success with the community model is dependent on lowering the technical and motivational barriers so that users can readily contribute to the conversation. Simple tools must be provided, and guidelines, if any, must be straightforward but not mandatory. The conversational approach is one where traditional style and branding guides do not necessarily apply. Tools and infrastructure help users to create content easily, to search and find the information online, read it, rate it, translate it, and participate further in the content's evolution. Recognizing contributors by using ratings on forums, giving out Twitter kudos, conference invitations, visits to headquarters, free products, preview releases, and so on, also encourages the adoption of the conversation model. The move to conversation as user assistance is not free, but there is a business ROI. The conversational model means that customer service is enhanced, as user experience moves from a functional to a valued, emotional level. Studies show a positive correlation between loyalty and financial performance (Consortium for Service Innovation, 2010), and as customer experience and loyalty become key differentiators, user experience professionals cannot explore the model's possibilities. The digital universe (measured at 1.2 million petabytes in 2010) is doubling every 12 to 18 months, and 70 percent of that universe consists of user-generated content (IDC, 2010). Conversation as user assistance cannot be ignored but must be embraced. It is a time to manage for abundance, not scarcity. Besides, the conversation approach certainly sounds more interesting, rewarding, and fun than the traditional model! I would like to thank Anne for her time and thoughts, and recommend that all user assistance professionals read her book. You can follow Anne on Twitter at: http://www.twitter.com/annegentle. Oracle's Acrolinx IQ deployment was used to author this article.

Read the article

Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

- by Asian Angel

This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

Read the article

IIS 7.5 , Tomcat 7 - Isapi redirector - Fail Over - sticky sessions

- by Jose Matias

I have two instances of Tomcat 7.0.8 running in the same machine (Tomcat7A and Tomcat7B) and IIS 7.5 acting as front-end load-balancer with isapi-redirector 1.2.31, running on Windows 2008 R2. When i disconnect the instance wich is handling a request i can see a new instance being assigned with the same sessionid but then the user is redirected to the login page. server.xml configuration file <Engine name="Catalina" defaultHost="localhost" jvmRoute="Tomcat7A"> <Realm className="org.apache.catalina.realm.LockOutRealm"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> </Realm> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true"> <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster" channelSendOptions="8"> <Manager className="org.apache.catalina.ha.session.DeltaManager" expireSessionsOnShutdown="false" notifyListenersOnReplication="true"/> <Channel className="org.apache.catalina.tribes.group.GroupChannel"> <Membership className="org.apache.catalina.tribes.membership.McastService" address="228.0.0.8" bind="7.3.1.22" port="45564" frequency="500" dropTime="3000"/> <Receiver className="org.apache.catalina.tribes.transport.nio.NioReceiver" address="auto" port="4200" autoBind="100" selectorTimeout="5000" maxThreads="6"/> <Sender className="org.apache.catalina.tribes.transport.ReplicationTransmitter"> <Transport className="org.apache.catalina.tribes.transport.nio.PooledParallelSender"/> </Sender> <Interceptor className="org.apache.catalina.tribes.group.interceptors.TcpFailureDetector"/> <Interceptor className="org.apache.catalina.tribes.group.interceptors.MessageDispatch15Interceptor"/> </Channel> <Valve className="org.apache.catalina.ha.tcp.ReplicationValve" filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt"/> <Valve className="org.apache.catalina.ha.session.JvmRouteBinderValve"/> <ClusterListener className="org.apache.catalina.ha.session.JvmRouteSessionIDBinderListener"/> <ClusterListener className="org.apache.catalina.ha.session.ClusterSessionListener"/> </Cluster> <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t "%r" %s %b" resolveHosts="false"/> </Host> </Engine> worker_mount_file=C:\tomcat\iis\conf\uriworkermap_prod.properties worker.list = balancer,status worker.Tomcat7B.host = 7.3.1.22 worker.Tomcat7B.type = ajp13 worker.Tomcat7B.port = 8010 worker.Tomcat7B.lbfactor = 10 worker.Tomcat7A.host = 7.3.1.22 worker.Tomcat7A.type = ajp13 worker.Tomcat7A.port = 8009 worker.Tomcat7A.lbfactor = 10 worker.balancer.type = lb worker.balancer.sticky_session = 1 worker.balancer.balance_workers = Tomcat7B, Tomcat7A worker.status.type = status isapi_redirect log [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker balancer [debug] HttpExtensionProc::jk_isapi_plugin.c (2188): got a worker for name balancer [debug] service::jk_lb_worker.c (1118): service sticky_session=1 id='89569C584CC4F58740D649C4BE655D36.Tomcat7B' [debug] get_most_suitable_worker::jk_lb_worker.c (946): searching worker for partial sessionid 89569C584CC4F58740D649C4BE655D36.Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (954): searching worker for session route Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (968): found worker Tomcat7B (Tomcat7B) for route Tomcat7B and partial sessionid 89569C584CC4F58740D649C4BE655D36.Tomcat7B [debug] service::jk_lb_worker.c (1161): service worker=Tomcat7B route=Tomcat7B [debug] ajp_get_endpoint::jk_ajp_common.c (3096): acquired connection pool slot=0 after 0 retries [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [debug] ajp_service::jk_ajp_common.c (2379): processing Tomcat7B with 2 retries [debug] jk_shutdown_socket::jk_connect.c (726): About to shutdown socket 820 [7.3.1.22:24482 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (797): shutting down the read side of socket 820 [7.3.1.22:24482 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (808): Shutdown socket 820 [7.3.1.22:24482 -> 7.3.1.22:8010] and read 0 lingering bytes in 0 sec. [debug] ajp_send_request::jk_ajp_common.c (1496): (Tomcat7B) failed sending request, socket 820 is not connected any more (errno=-10000) [debug] ajp_next_connection::jk_ajp_common.c (823): (Tomcat7B) Will try pooled connection socket 896 from slot 1 [debug] jk_shutdown_socket::jk_connect.c (726): About to shutdown socket 896 [7.3.1.22:24488 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (797): shutting down the read side of socket 896 [7.3.1.22:24488 -> 7.3.1.22:8010] [debug] jk_shutdown_socket::jk_connect.c (808): Shutdown socket 896 [7.3.1.22:24488 -> 7.3.1.22:8010] and read 0 lingering bytes in 0 sec. [debug] ajp_send_request::jk_ajp_common.c (1496): (Tomcat7B) failed sending request, socket 896 is not connected any more (errno=-10000) [info] ajp_send_request::jk_ajp_common.c (1567): (Tomcat7B) all endpoints are disconnected, detected by connect check (2), cping (0), send (0) [debug] jk_open_socket::jk_connect.c (484): socket TCP_NODELAY set to On [debug] jk_open_socket::jk_connect.c (608): trying to connect socket 896 to 7.3.1.22:8010 [info] jk_open_socket::jk_connect.c (626): connect to 7.3.1.22:8010 failed (errno=61) [info] ajp_connect_to_endpoint::jk_ajp_common.c (959): Failed opening socket to (7.3.1.22:8010) (errno=61) [error] ajp_send_request::jk_ajp_common.c (1578): (Tomcat7B) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [info] ajp_service::jk_ajp_common.c (2543): (Tomcat7B) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [debug] ajp_service::jk_ajp_common.c (2400): retry 1, sleeping for 100 ms before retrying [debug] ajp_send_request::jk_ajp_common.c (1572): (Tomcat7B) all endpoints are disconnected. [debug] jk_open_socket::jk_connect.c (484): socket TCP_NODELAY set to On [debug] jk_open_socket::jk_connect.c (608): trying to connect socket 896 to 7.3.1.22:8010 [info] jk_open_socket::jk_connect.c (626): connect to 7.3.1.22:8010 failed (errno=61) [info] ajp_connect_to_endpoint::jk_ajp_common.c (959): Failed opening socket to (7.3.1.22:8010) (errno=61) [error] ajp_send_request::jk_ajp_common.c (1578): (Tomcat7B) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [info] ajp_service::jk_ajp_common.c (2543): (Tomcat7B) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [error] ajp_service::jk_ajp_common.c (2562): (Tomcat7B) connecting to tomcat failed. [debug] ajp_reset_endpoint::jk_ajp_common.c (757): (Tomcat7B) resetting endpoint with socket -1 (socket shutdown) [debug] ajp_done::jk_ajp_common.c (3013): recycling connection pool slot=0 for worker Tomcat7B [debug] service::jk_lb_worker.c (1374): worker Tomcat7B escalating local error to global error [info] service::jk_lb_worker.c (1388): service failed, worker Tomcat7B is in error state [debug] service::jk_lb_worker.c (1399): recoverable error... will try to recover on other worker [debug] get_most_suitable_worker::jk_lb_worker.c (946): searching worker for partial sessionid 89569C584CC4F58740D649C4BE655D36.Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (954): searching worker for session route Tomcat7B [debug] get_most_suitable_worker::jk_lb_worker.c (1001): found best worker Tomcat7A (Tomcat7A) using method 'Request' [debug] service::jk_lb_worker.c (1161): service worker=Tomcat7A route=Tomcat7B [debug] ajp_get_endpoint::jk_ajp_common.c (3096): acquired connection pool slot=0 after 0 retries [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [debug] ajp_service::jk_ajp_common.c (2379): processing Tomcat7A with 2 retries [debug] ajp_send_request::jk_ajp_common.c (1572): (Tomcat7A) all endpoints are disconnected. [debug] jk_open_socket::jk_connect.c (484): socket TCP_NODELAY set to On [debug] jk_open_socket::jk_connect.c (608): trying to connect socket 896 to 7.3.1.22:8009 [debug] jk_open_socket::jk_connect.c (634): socket 896 [7.3.1.22:24496 -> 7.3.1.22:8009] connected [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): sending to ajp13 pos=4 len=615 max=8192 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0000 .4.c....HTTP/1.1 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0010 .../Accounter/pr [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0020 intFrameSet.jhtm [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0030 l...::1...::1... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0040 localhost..P.... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0050 ...Keep-Alive... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0060 ..0....rimage/jp [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0070 eg,.image/gif,.i [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0080 mage/pjpeg,.appl [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0090 ication/x-ms-app [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00a0 lication,.applic [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00b0 ation/xaml+xml,. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00c0 application/x-ms [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00d0 -xbap,.*/*...Acc [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00e0 ept-Encoding...g [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00f0 zip,.deflate...A [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0100 ccept-Language.. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0110 .nb-NO....]Usern [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0120 ame=NA_jose.mati [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0130 as_AT_addenergy. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0140 no;.JSESSIONID=8 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0150 9569C584CC4F5874 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0160 0D649C4BE655D36. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0170 Tomcat7B.....loc [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0180 alhost.....http: [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0190 //localhost/Acco [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01a0 unter/NemsAccoun [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01b0 ter.jhtml....uMo [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01c0 zilla/4.0.(compa [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01d0 tible;.MSIE.8.0; [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01e0 .Windows.NT.6.1; [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01f0 .WOW64;.Trident/ [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0200 4.0;.SLCC2;..NET [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0210 .CLR.2.0.50727;. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0220 .NET4.0C;..NET4. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0230 0E)............F [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0240 rameName=Reports [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0250 _CS_EUETS....Tom [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0260 cat7B........... [debug] ajp_send_request::jk_ajp_common.c (1632): (Tomcat7A) request body to send 0 - request body to resend 0 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): received from ajp13 pos=0 len=238 max=8192 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0000 .....Moved.Tempo [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0010 rarily......OJSE [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0020 SSIONID=6A2507A4 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0030 626F698EC74A733C [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0040 DBA7D9FE.Tomcat7 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0050 A;.Path=/Account [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0060 er;.HttpOnly...P [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0070 ragma...no-cache [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0080 ...Cache-Control [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0090 ...no-cache....& [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00a0 http://localhost [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00b0 /Accounter/login [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00c0 .jhtml.....text/ [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00d0 html;charset=ISO [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 00e0 -8859-1.....0... [debug] ajp_unmarshal_response::jk_ajp_common.c (660): status = 302 [debug] ajp_unmarshal_response::jk_ajp_common.c (667): Number of headers is = 6 [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[0] [Set-Cookie] = [JSESSIONID=6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A; Path=/Accounter; HttpOnly] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[1] [Pragma] = [no-cache] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[2] [Cache-Control] = [no-cache] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[3] [Location] = [http://localhost/Accounter/login.jhtml] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[4] [Content-Type] = [text/html;charset=ISO-8859-1] [debug] ajp_unmarshal_response::jk_ajp_common.c (723): Header[5] [Content-Length] = [0] [debug] start_response::jk_isapi_plugin.c (963): Starting response for URI '/Accounter/printFrameSet.jhtml' (protocol HTTP/1.1) [debug] start_response::jk_isapi_plugin.c (1063): Not using Keep-Alive [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): received from ajp13 pos=0 len=2 max=8192 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0000 ................ [debug] ajp_process_callback::jk_ajp_common.c (1943): AJP13 protocol: Reuse is OK [debug] ajp_reset_endpoint::jk_ajp_common.c (757): (Tomcat7A) resetting endpoint with socket 896 [debug] ajp_done::jk_ajp_common.c (3013): recycling connection pool slot=0 for worker Tomcat7A [debug] HttpExtensionProc::jk_isapi_plugin.c (2211): service() returned OK [debug] HttpFilterProc::jk_isapi_plugin.c (1851): Filter started [debug] map_uri_to_worker_ext::jk_uri_worker_map.c (1036): Attempting to map URI '/localhost/Accounter/login.jhtml' from 8 maps [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/servlet/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/ws/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/nems*.pdf=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.service=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.jhtml=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.json=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/jkmanager=status' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/servlet/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/ws/*=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/nems*.pdf=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.service=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (850): Attempting to map context URI '/Accounter/*.jhtml=balancer' source 'uriworkermap' [debug] find_match::jk_uri_worker_map.c (863): Found a wildchar match '/Accounter/*.jhtml=balancer' [debug] HttpFilterProc::jk_isapi_plugin.c (1938): check if [/Accounter/login.jhtml] points to the web-inf directory [debug] HttpFilterProc::jk_isapi_plugin.c (1954): [/Accounter/login.jhtml] is a servlet url - should redirect to balancer [debug] HttpFilterProc::jk_isapi_plugin.c (1994): fowarding escaped URI [/Accounter/login.jhtml] [debug] init_ws_service::jk_isapi_plugin.c (2982): Reading extension header HTTP_TOMCATWORKER0000000180000000: balancer [debug] init_ws_service::jk_isapi_plugin.c (2983): Reading extension header HTTP_TOMCATWORKERIDX0000000180000000: 5 [debug] init_ws_service::jk_isapi_plugin.c (2984): Reading extension header HTTP_TOMCATURI0000000180000000: /Accounter/login.jhtml [debug] init_ws_service::jk_isapi_plugin.c (2985): Reading extension header HTTP_TOMCATQUERY0000000180000000: (null) [debug] init_ws_service::jk_isapi_plugin.c (3040): Applying service extensions [debug] init_ws_service::jk_isapi_plugin.c (3298): Service protocol=HTTP/1.1 method=GET host=::1 addr=::1 name=localhost port=80 auth= user= uri=/Accounter/login.jhtml [debug] init_ws_service::jk_isapi_plugin.c (3310): Service request headers=9 attributes=0 chunked=no content-length=0 available=0 [debug] wc_get_worker_for_name::jk_worker.c (116): found a worker balancer [debug] HttpExtensionProc::jk_isapi_plugin.c (2188): got a worker for name balancer [debug] service::jk_lb_worker.c (1118): service sticky_session=1 id='6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A' [debug] get_most_suitable_worker::jk_lb_worker.c (946): searching worker for partial sessionid 6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A [debug] get_most_suitable_worker::jk_lb_worker.c (954): searching worker for session route Tomcat7A [debug] get_most_suitable_worker::jk_lb_worker.c (968): found worker Tomcat7A (Tomcat7A) for route Tomcat7A and partial sessionid 6A2507A4626F698EC74A733CDBA7D9FE.Tomcat7A [debug] service::jk_lb_worker.c (1161): service worker=Tomcat7A route=Tomcat7A [debug] ajp_get_endpoint::jk_ajp_common.c (3096): acquired connection pool slot=0 after 0 retries [debug] ajp_marshal_into_msgb::jk_ajp_common.c (605): ajp marshaling done [debug] ajp_service::jk_ajp_common.c (2379): processing Tomcat7A with 2 retries [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): sending to ajp13 pos=4 len=577 max=8192 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0000 .4.=....HTTP/1.1 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0010 .../Accounter/lo [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0020 gin.jhtml...::1. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0030 ..::1...localhos [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0040 t..P.......Keep- [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0050 Alive.....0....r [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0060 image/jpeg,.imag [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0070 e/gif,.image/pjp [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0080 eg,.application/ [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0090 x-ms-application [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00a0 ,.application/xa [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00b0 ml+xml,.applicat [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00c0 ion/x-ms-xbap,.* [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00d0 /*...Accept-Enco [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00e0 ding...gzip,.def [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 00f0 late...Accept-La [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0100 nguage...nb-NO.. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0110 ..]Username=NA_j [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0120 ose.matias_AT_ad [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0130 denergy.no;.JSES [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0140 SIONID=6A2507A46 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0150 26F698EC74A733CD [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0160 BA7D9FE.Tomcat7A [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0170 .....localhost.. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0180 ...http://localh [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0190 ost/Accounter/Ne [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01a0 msAccounter.jhtm [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01b0 l....uMozilla/4. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01c0 0.(compatible;.M [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01d0 SIE.8.0;.Windows [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01f0 Trident/4.0;.SLC [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 01e0 .NT.6.1;.WOW64;. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0200 C2;..NET.CLR.2.0 [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0210 .50727;..NET4.0C [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0220 ;..NET4.0E)..... [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0230 .......Tomcat7A. [debug] ajp_connection_tcp_send_message::jk_ajp_common.c (1145): 0240 ................ [debug] ajp_send_request::jk_ajp_common.c (1621): (Tomcat7A) Statistics about invalid connections: connect check (0), cping (0), send (0) [debug] ajp_send_request::jk_ajp_common.c (1632): (Tomcat7A) request body to send 0 - request body to resend 0 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): received from ajp13 pos=0 len=135 max=8192 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0000 .....OK.....Prag [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0010 ma...no-cache... [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0020 Expires...Thu,.0 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0030 1.Jan.1970.00:00 [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0040 :00.GMT...Cache- [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0050 Control...no-cac [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0060 he...Cache-Contr [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0070 ol...no-store... [debug] ajp_connection_tcp_get_message::jk_ajp_common.c (1329): 0080 ..2995..........

Read the article

trying to use mod_proxy with httpd and tomcat

- by techsjs2012

I been trying to use mod_proxy with httpd and tomcat... I have on VirtualBox running Scientific Linux which has httpd and tomcat 6 on it.. I made two nodes of tomcat6. I followed this guide like 10 times and still cant get the 2nd node of tomcat working.. http://www.richardnichols.net/2010/08/5-minute-guide-clustering-apache-tomcat/ Here is the lines from my http.conf file <Proxy balancer://testcluster stickysession=JSESSIONID> BalancerMember ajp://127.0.0.1:8009 min=10 max=100 route=node1 loadfactor=1 BalancerMember ajp://127.0.0.1:8109 min=10 max=100 route=node2 loadfactor=1 </Proxy> ProxyPass /examples balancer://testcluster/examples <Location /balancer-manager> SetHandler balancer-manager AuthType Basic AuthName "Balancer Manager" AuthUserFile "/etc/httpd/conf/.htpasswd" Require valid-user </Location> Now here is my server.xml from node1 <?xml version='1.0' encoding='utf-8'?>   <Server port="8005" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node1">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> now here is the server.xml file from node2 <?xml version='1.0' encoding='utf-8'?>   <Server port="8105" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node2">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> I dont know what it is. but I been trying for days

Read the article

BizTalk and IBM WebSphere MQ Errors

- by Christopher House

The project I'm currently working on is going to make heavy use of IBM WebShere MQ to send messages from BizTalk to the client's iSeries box. I'd never previously worked with WebSphere MQ, so I didn't really have any idea what it would take to get this to work. I was pleasantly surprised that it wasn't too difficult to configure a send port and pass messages through it to a queue. Or so I thought... A couple of weeks ago, the client gave me the name of a host, queue manager and queue that I'd been using for my development. Everything was going great, I was able to put messages onto the queue, I was happy, the client was happy. Life was good. Then the client tells me that the host I've been connecting to is actually a Solaris box and that in prod, we'll actually be sending to an iSeries. We both agree that it would behoove us to start pointing my dev environment to their dev iSeries box in order to flush out any weirdness there might be. As it turns out, it was a good thing we made the change. As soon as I reconfigured my BRE policy that sets endpoint information to point to the iSeries queue, we started seeing failures in the event log. An example from the event log: Event Type: Error Event Source: BizTalk Server 2009 Event Category: BizTalk Server 2009 Event ID: 5754 Date: 6/9/2010 Time: 10:16:41 AM User: N/A Computer: WINDOWS2003 Description: A message sent to adapter "MQSC" on send port "<my dynamic sendport name>" with URI "mqsc://client/tcp/<hostname>(1414)/<queue manager name>/<queue name>" is suspended. Error details: Failure encountered while attempting to open queue. queue = <queue name> queueManager = <queue manager name>, reasonCode = 6124 MessageId: {76825C7C-611A-4A56-8A6F-35E1124BDB5C} InstanceID: {BA389103-DF9B-493F-8C61-44574822AAD6} The key piece of information in the event entry is the reasonCode, 6124. A quick Google search shows that reasonCode 6124 is the code for MQRC_NOT_CONNECTED. According to IBM's docs, this means that you've tried to send a message without first opening a connection to the queue manager. Obviously, in the context of BizTalk, this is an unexpected error, since this sort of thing should be managed entirely by the send adapter. Perusing IBM's documentation a bit more, I came across some info on how to turn on tracing for MQ. With tracing enabled, I tried sending a message again, then went and reviewed the trace files. The bulk of the information in the trace files didn't mean a thing to me, but at the end of one of the files, I did notice this: 00006257 15:40:20.327795 3500.4 RSESS:000009 ------{ reqReleaseConn 00006258 15:40:20.328714 3500.4 RSESS:000009 ------} reqReleaseConn (rc=OK) 00006259 15:40:20.328727 3500.4 RSESS:000009 ------{ xcsClearTraceIdent 0000625A 15:40:20.328739 3500.4 : ------} xcsClearTraceIdent (rc=OK) 0000625B 15:40:20.328752 3500.4 : -----}! trmzstMQCONNX (rc=MQRC_NOT_AUTHORIZED) 0000625C 15:40:20.328765 3500.4 : ----}! MQCONNX (rc=MQRC_NOT_AUTHORIZED) 0000625D 15:40:20.328766 3500.4 : ---}! ImqQueueManager::connect (rc=MQRC_NOT_AUTHORIZED) 0000625E 15:40:20.328767 3500.4 : --}! ImqObject::open (rc=MQRC_NOT_CONNECTED) 0000625F 15:40:20.328768 3500.4 : --{ ImqQueue::lock 00006260 15:40:20.328769 3500.4 : --}! ImqQueue::lock (rc=Unknown(1)) 00006261 15:40:20.328769 3500.4 : --{ ImqQueue::unlock 00006262 15:40:20.328769 3500.4 : --}! ImqQueue::unlock (rc=Unknown(1)) It seemed like the MQRC_NOT_CONNECTED error was being caused by a security related issue (MQRC_NOT_AUTHORIZED). I did notice something earlier in the log where it appeared that MQ was passing a field named UID with a value equal to the account name that my BizTalk service was running under. I ended up creating a new local account on the BizTalk server that had the same name as a user which had access to the queue manager on the iSeries. I then created a new host instance that ran under this new account, created a send handler for the MQSC adapter on this new host instance and reconfigured my orchestration to run on the new host instance. After bouncing all my host instances, I was now able to send messages to the iSeries. It's still not clear to me why we were able to connect to the Solaris server. I ended up contacting IBM's support and they did confirm that the process sending to MQ does in fact pass the identity to the queue manager it's connecting to.

Read the article

JavaOne Latin America 2012 is a wrap!

- by arungupta

Third JavaOne in Latin America (2010, 2011) is now a wrap! Like last year, the event started with a Geek Bike Ride. I could not attend the bike ride because of pre-planned activities but heard lots of good comments about it afterwards. This is a great way to engage with JavaOne attendees in an informal setting. I highly recommend you joining next time! JavaOne Blog provides a a great coverage for the opening keynotes. I talked about all the great set of functionality that is coming in the Java EE 7 Platform. Also shared the details on how Java EE 7 JSRs are willing to take help from the Adopt-a-JSR program. glassfish.org/adoptajsr bridges the gap between JUGs willing to participate and looking for areas on where to help. The different specification leads have identified areas on where they are looking for feedback. So if you are JUG is interested in picking a JSR, I recommend to take a look at glassfish.org/adoptajsr and jump on the bandwagon. The main attraction for the Tuesday evening was the GlassFish Party. The party was packed with Latin American JUG leaders, execs from Oracle, and local community members. Free flowing food and beer/caipirinhas acted as great lubricant for great conversations. Some of them were considering the migration from Spring -> Java EE 6 and replacing their primary app server with GlassFish. Locaweb, a local hosting provider sponsored a round of beer at the party as well. They are planning to come with Java EE hosting next year and GlassFish would be a logical choice for them ;) I heard lots of positive feedback about the party afterwards. Many thanks to Bruno Borges for organizing a great party! Check out some more fun pictures of the party! Next day, I gave a presentation on "The Java EE 7 Platform: Productivity and HTML 5" and the slides are now available: With so much new content coming in the plaform: Java Caching API (JSR 107) Concurrency Utilities for Java EE (JSR 236) Batch Applications for the Java Platform (JSR 352) Java API for JSON (JSR 353) Java API for WebSocket (JSR 356) And JAX-RS 2.0 (JSR 339) and JMS 2.0 (JSR 343) getting major updates, there is definitely lot of excitement that was evident amongst the attendees. The talk was delivered in the biggest hall and had about 200 attendees. Also spent a lot of time talking to folks at the OTN Lounge. The JUG leaders appreciation dinner in the evening had its usual share of fun. Day 3 started with a session on "Building HTML5 WebSocket Apps in Java". The slides are now available: The room was packed with about 150 attendees and there was good interaction in the room as well. A collaborative whiteboard built using WebSocket was very well received. The following tweets made it more worthwhile: A WebSocket speek, by @ArunGupta, was worth every hour lost in transit. #JavaOneBrasil2012, #JavaOneBr @arungupta awesome presentation about WebSockets :) The session was immediately followed by the hands-on lab "Developing JAX-RS Web Applications Utilizing Server-Sent Events and WebSocket". The lab covers JAX-RS 2.0, Jersey-specific features such as Server-Sent Events, and a WebSocket endpoint using JSR 356. The complete self-paced lab guide can be downloaded from here. The lab was planned for 2 hours but several folks finished the entire exercise in about 75 mins. The wonderfully written lab material and an added incentive of Java EE 6 Pocket Guide did the trick ;-) I also spoke at "The Java Community Process: How You Can Make a Positive Difference". It was really great to see several JUG leaders talking about Adopt-a-JSR program and other activities that attendees can do to participate in the JCP. I shared details about Adopt a Java EE 7 JSR as well. The community keynote in the evening was looking fun but I had to leave in between to go through the peak Sao Paulo traffic time :) Enjoy the complete set of pictures in the album:

Read the article

Our Oracle Recruitment Team is Growing - Multiple Job Opportunities in Bangalore, India

- by david.talamelli

DON"T GET STUCK IN THE MATRIXSEE YOUR FUTUREVISIT THE ORACLE The position(s): CORPORATE RECRUITING RESEARCH ANALYST(S) ABOUT ORACLE Oracle's business is information--how to manage it, use it, share it, protect it. For three decades, Oracle, the world's largest enterprise software company, has provided the software and services that allow organizations to get the most up-to-date and accurate information from their business systems. Only Oracle powers the information-driven enterprise by offering a complete, integrated solution for every segment of the process industry. When you run Oracle applications on Oracle technology, you speed implementation, optimize performance, and maximize ROI. Great hiring doesn't happen by accident; it's the culmination of a series of thoughtfully planned and well executed events. At the core of any hiring process is a sourcing strategy. This is where you come in... Do you want to be a part of a world-class recruiting organization that's on the cutting edge of technology? Would you like to experience a rewarding work environment that allows you to further develop your skills, while giving you the opportunity to develop new skills? If you answered yes, you've taken your first step towards a future with Oracle. We are building a Research Team to support our North America Recruitment Team, and we need creative, smart, and ambitious individuals to help us drive our research department forward. Oracle has a track record for employing and developing the very best in the industry. We invest generously in employee development, training and resources. Be a part of the most progressive internal recruiting team in the industry. For more information about Oracle, please visit our Web site at http://www.oracle.com Escape the hum drum job world matrix, visit the Oracle and be a part of a winning team, apply today. POSITION: Corporate Recruiting Research Analyst LOCATION: Bangalore, India RESPONSIBILITIES: •Develop candidate pipeline using Web 2.0 sourcing strategies and advanced Boolean Search techniques to support U.S. Recruiting Team for various job functions and levels. •Engage with assigned recruiters to understand the supported business as well as the recruiting requirements; partner with recruiters to meet expectations and deliver a qualified pipeline of candidates. •Source candidates to include both active and passive job seekers to provide a strong pipeline of qualified candidates for each recruiter; exercise creativity to find candidates using Oracle's advanced sourcing tools/techniques. •Fully evaluate candidate's background against the requirements provided by recruiter, and process leads using ATS (Applicant Tracking System). •Manage your efforts efficiently; maintain the highest levels of client satisfaction as well as strong operations and reporting of research activities. PREFERRED QUALIFICATIONS: •Fluent in English, with excellent written and oral communication skills. •Undergraduate degree required, MBA or Masters preferred. •Proficiency with Boolean Search techniques desired. •Ability to learn new software applications quickly. •Must be able to accommodate some U.S. evening hours. •Strong organization and attention to detail skills. •Prior HR or corporate in-house recruiting experiences a plus. •The fire in the belly to learn new ideas and succeed. •Ability to work in team and individual environments. This is an excellent opportunity to join Oracle in our Bangalore Offices. Interested applicants can send their resume to [email protected] or contact David on +61 3 8616 3364

Read the article

Installer Reboots at "Detecting hardware" (disks and other hardware) on all recent Server Installs

- by Ryan Rosario

I have a very frustrating problem with my PC. I cannot install any recent version of Ubuntu Server (or even Desktop) since 9.04 even using the text-based installer. I boot from a USB stick created by Unetbootin (I also tried other methods such as startup disk creator with no difference). On the Server installer, it gets to "Detecting Hardware" (the second one about disks and all other hardware, not network hardware) and then either hangs at 0% (waited 24 hours), or reboots after a minute or two. My system (late 2007): ASUS P5NSLI motherboard Intel Core 2 Duo E6600 2.4Ghz 2 x 1GB Corsair 667MHz RAM nVidia GeForce 6600 I have unplugged everything (including the only hard disk, CD-ROMs and floppy). I have only one stick of RAM (tried each one to no avail) and am booting the installer from a USB stick (booting from CD-ROM yields the same problem). I also tried several of the boot options (nomodeset, nousb, acpi=off, noapic, i915.modeset=1/0, xforcevesa) in all combinations) to no avail. The only active parts of my system are the video card, mouse, keyboard and USB stick. I have also updated the BIOS to the most recent version. (FWIW, on the Desktop installer, I get a black screen after hitting the Install option.) Even after removing "quiet" I am unable to see what kernel panic is occurring (or not occurring) to cause the install to crash. I am only able to save the debug logs via a simple webserver in the installer. After the last line (I repeatedly refreshed), the server stops responding and the installer hangs or reboots: Jan 2 01:04:03 main-menu[302]: INFO: Menu item 'disk-detect' selected Jan 2 01:04:04 kernel: [ 309.154372] sata_nv 0000:00:0e.0: version 3.5 Jan 2 01:04:04 kernel: [ 309.154409] sata_nv 0000:00:0e.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.154531] sata_nv 0000:00:0e.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.164442] scsi0 : sata_nv Jan 2 01:04:04 kernel: [ 309.167610] scsi1 : sata_nv Jan 2 01:04:04 kernel: [ 309.167762] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 10 Jan 2 01:04:04 kernel: [ 309.167774] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 10 Jan 2 01:04:04 kernel: [ 309.167948] sata_nv 0000:00:0f.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.168071] sata_nv 0000:00:0f.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.171931] scsi2 : sata_nv Jan 2 01:04:04 kernel: [ 309.173793] scsi3 : sata_nv Jan 2 01:04:04 kernel: [ 309.173943] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 11 Jan 2 01:04:04 kernel: [ 309.173954] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 11 Jan 2 01:04:04 kernel: [ 309.174061] pata_amd 0000:00:0d.0: version 0.4.1 Jan 2 01:04:04 kernel: [ 309.174160] pata_amd 0000:00:0d.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.177045] scsi4 : pata_amd Jan 2 01:04:04 kernel: [ 309.178628] scsi5 : pata_amd Jan 2 01:04:04 kernel: [ 309.178801] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 Jan 2 01:04:04 kernel: [ 309.178811] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface lo Jan 2 01:04:04 kernel: [ 309.485062] ata3: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:04 kernel: [ 309.633094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jan 2 01:04:04 kernel: [ 309.641647] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 Jan 2 01:04:04 kernel: [ 309.641658] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) Jan 2 01:04:04 kernel: [ 309.657614] ata1.00: configured for UDMA/133 Jan 2 01:04:04 kernel: [ 309.657969] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 Jan 2 01:04:04 kernel: [ 309.658482] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 2 01:04:04 kernel: [ 309.658588] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Jan 2 01:04:04 kernel: [ 309.658812] sd 0:0:0:0: [sda] Write Protect is off Jan 2 01:04:04 kernel: [ 309.658823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 2 01:04:04 kernel: [ 309.658918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 2 01:04:04 kernel: [ 309.675630] sda: sda1 sda2 Jan 2 01:04:04 kernel: [ 309.676440] sd 0:0:0:0: [sda] Attached SCSI disk Jan 2 01:04:05 kernel: [ 309.969102] ata2: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:05 kernel: [ 310.281137] ata4: SATA link down (SStatus 0 SControl 300) Anybody have any additional ideas I could try? I am getting ready to just toss the motherboard.

Read the article

Creating typed WSDL’s for generic WCF services of the ESB Toolkit

- by charlie.mott

source: http://geekswithblogs.net/charliemott Question How do you make it easy for client systems to consume the generic WCF services exposed by the ESB Toolkit using messages that conform to agreed schemas\contracts? Usually the developer of a system consuming a web service adds a service reference using a WSDL. However, the WSDL’s for the generic services exposed by the ESB Toolkit do not make it easy to develop clients that conform to agreed schemas\contracts. Recommendation Take a copy of the generic WSDL’s and modify it to use the proper contracts. This is very easy. It will work with the generic on ramps so long as the <part>?</part> wrapping is removed from the WCF adapter configuration in the BizTalk receive locations. Attempting to create a WSDL where the input and output messages are sent/returned with a <part> wrapper is a nightmare. I have not managed it. Consequences I can only see the following consequences of removing the <part> wrapper: ESB Test Client – I needed to modify the out-of-the-box ESB Test Client source code to make it send non-wrapped messages. Flat file formatted messages – the endpoint will no longer support flat file message formats. However, even if you needed to support this integration pattern through WCF, you would most-likely want to create a separate receive location anyway with its’ own independently configured XML disassembler pipeline component. Instructions These steps show how to implement a request-response implementation of this. WCF Receive Locations In BizTalk, for the WCF receive location for the ESB on-ramp, set the adapter Message settings\bindings to “UseBodyPath”: Inbound BizTalk message body = Body Outbound WCF message body = Body Create a WSDL’s for each supported integration use-case Save a copy of the WSDL for the WCF generic receive location above that you intend the client system to use. Give it a name that mirrors the interface agreement (e.g. Esb_SuppliersSearchCommand_wsHttpBinding.wsdl). Add any xsd schemas files imported below to this same folder. Edit the WSDL to import schemas For example, this: <xsd:schema targetNamespace=http://microsoft.practices.esb/Imports /> … would become something like: <xsd:schema targetNamespace="http://microsoft.practices.esb/Imports"> <xsd:import schemaLocation="SupplierSearchCommand_V1.xsd" namespace="http://schemas.acme.co.uk/suppliersearchcommand/1.0"/> <xsd:import schemaLocation="SuppliersDocument_V1.xsd" namespace="http://schemas.acme.co.uk/suppliersdocument/1.0"/> <xsd:import schemaLocation="Types\Supplier_V1.xsd" namespace="http://schemas.acme.co.uk/types/supplier/1.0"/> <xsd:import schemaLocation="GovTalk\bs7666-v2-0.xsd" namespace="http://www.govtalk.gov.uk/people/bs7666"/> <xsd:import schemaLocation="GovTalk\CommonSimpleTypes-v1-3.xsd" namespace="http://www.govtalk.gov.uk/core"/> <xsd:import schemaLocation="GovTalk\AddressTypes-v2-0.xsd" namespace="http://www.govtalk.gov.uk/people/AddressAndPersonalDetails"/> </xsd:schema> Modify the Input and Output message For example, this: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage"> <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage"> <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> … would become something like: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage"> <wsdl:part name="part" element="ssc:SupplierSearchEvent" xmlns:ssc="http://schemas.acme.co.uk/suppliersearchcommand/1.0" /> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage"> <wsdl:part name="part" element="sd:SuppliersDocument" xmlns:sd="http://schemas.acme.co.uk/suppliersdocument/1.0"/> </wsdl:message> This WSDL can now be added as a service reference in client solutions.

Read the article

MySQL Connect 8 Days Away - Replication Sessions

- by Mat Keep

Following on from my post about MySQL Cluster sessions at the forthcoming Connect conference, its now the turn of MySQL Replication - another technology at the heart of scaling and high availability for MySQL. Unless you've only just returned from a 6-month alien abduction, you will know that MySQL 5.6 includes the largest set of replication enhancements ever packaged into a single new release: - Global Transaction IDs + HA utilities for self-healing cluster..(yes both automatic failover and manual switchover available!) - Crash-safe slaves and binlog - Binlog Group Commit and Multi-Threaded Slaves for high performance - Replication Event Checksums and Time-Delayed replication - and many more There are a number of sessions dedicated to learn more about these important new enhancements, delivered by the same engineers who developed them. Here is a summary Saturday 29th, 13.00 Replication Tips and Tricks, Mats Kindahl In this session, the developers of MySQL Replication present a bag of useful tips and tricks related to the MySQL 5.5 GA and MySQL 5.6 development milestone releases, including multisource replication, using logs for auditing, handling filtering, examining the binary log, using relay slaves, splitting the replication stream, and handling failover. Saturday 29th, 17.30 Enabling the New Generation of Web and Cloud Services with MySQL 5.6 Replication, Lars Thalmann This session showcases the new replication features, including • High performance (group commit, multithreaded slave) • High availability (crash-safe slaves, failover utilities) • Flexibility and usability (global transaction identifiers, annotated row-based replication [RBR]) • Data integrity (event checksums) Saturday 29th, 1900 MySQL Replication Birds of a Feather In this session, the MySQL Replication engineers discuss all the goodies, including global transaction identifiers (GTIDs) with autofailover; multithreaded, crash-safe slaves; checksums; and more. The team discusses the design behind these enhancements and how to get started with them. You will get the opportunity to present your feedback on how these can be further enhanced and can share any additional replication requirements you have to further scale your critical MySQL-based workloads. Sunday 30th, 10.15 Hands-On Lab, MySQL Replication, Luis Soares and Sven Sandberg But how do you get started, how does it work, and what are the best practices and tools? During this hands-on lab, you will learn how to get started with replication, how it works, architecture, replication prerequisites, setting up a simple topology, and advanced replication configurations. The session also covers some of the new features in the MySQL 5.6 development milestone releases. Sunday 30th, 13.15 Hands-On Lab, MySQL Utilities, Chuck Bell Would you like to learn how to more effectively manage a host of MySQL servers and manage high-availability features such as replication? This hands-on lab addresses these areas and more. Participants will get familiar with all of the MySQL utilities, using each of them with a variety of options to configure and manage MySQL servers. Sunday 30th, 14.45 Eliminating Downtime with MySQL Replication, Luis Soares The presentation takes a deep dive into new replication features such as global transaction identifiers and crash-safe slaves. It also showcases a range of Python utilities that, combined with the Release 5.6 feature set, results in a self-healing data infrastructure. By the end of the session, attendees will be familiar with the new high-availability features in the whole MySQL 5.6 release and how to make use of them to protect and grow their business. Sunday 30th, 17.45 Scaling for the Web and the Cloud with MySQL Replication, Luis Soares In a Replication topology, high performance directly translates into improving read consistency from slaves and reducing the risk of data loss if a master fails. MySQL 5.6 introduces several new replication features to enhance performance. In this session, you will learn about these new features, how they work, and how you can leverage them in your applications. In addition, you will learn about some other best practices that can be used to improve performance. So how can you make sure you don't miss out - the good news is that registration is still open ;-) And just to whet your appetite, listen to the On-Demand webinar that presents an overview of MySQL 5.6 Replication.

Read the article

SQL SERVER – What is SSRS and Why SSRS is asked for in many Job Opening?

- by Pinal Dave

This example is from the Beginning SSRS by Kathi Kellenberger. Supporting files are available with a free download from the www.Joes2Pros.com web site. This will be a 5 day blog post in getting started with SSRS. Today will show the importance of SSRS in the business. Why is SSRS asked for in so many job openings? If you talk to an SSRS expert it’s very clear to them exactly why companies really need this invention and how it saves time and adds business value. You don’t have to be an SSRS expert to know its value or to start using it. For example you don’t have to be an airline pilot to know the usefulness of modern transportation. Even the people who don’t know how to run SSRS but need the reports can tell you why that is needed. This blog post will go into why SSRS is an important invention by showing how it improves the usage of information in your company. Before SSRS there has always been a need for a company to benefit from the use of its own information. Excel spreadsheets have been a popular way to do this for a long time. With SSRS you can still use this solution and gain many other options too. A friend of mine told me a story about doing database work in the 90s for a major company and how he wished SSRS was available back then. The Vice President of the marketing channel would often come to him just before an important meeting with the board of directors. He often needed to show how certain product sales were performing over time. All this information was in the database so it was my friend’s job to get the information out and organized into a medium the VP could use. This medium was usually Excel. The VP often had meetings all over the world where he showcased this Excel report. The solution to get the VP to him anywhere he was in the world was an Excel file attached to an e-mail. This worked pretty well but with some drawbacks. One time my friend sent the wrong file in the e-mail. A few minutes later my friend realized his mistake and sent another frantic e-mail to VP. This one was saying to ignore the last e-mail and use this newer one. Would the VP see the correct e-mail in time? If SSRS had been available, my friend could have created a solution that let the VP run the report any time he wished. The report could have been published to the company intranet where the VP could run it from any of the offices he happened to be traveling to that month. There is a fair amount of work up front to develop and publish the report, but once that work is completed, the report can be reused as many times as needed. My friend could even be on vacation for the first day of the monthly and the VP can get his real-time report. Not only could the report show the most recent data, the VP could choose to view reports of previous months with just a few clicks. The deployed SSRS is user friendly, and can also be configured to protect reports from being run by the wrong people. Tomorrow’s Post Tomorrow’s blog post will show how to know if you already have SSRS installed. If you want to learn SSRS in easy to simple words – I strongly recommend you to get Beginning SSRS book from Joes 2 Pros. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Reporting Services, SSRS

Read the article

Running ODI 11gR1 Standalone Agent as a Windows Service

- by fx.nicolas

ODI 11gR1 introduces the capability to use OPMN to start and protect agent processes as services. Setting up the OPMN agent is covered in the following post and extensively in the ODI Installation Guide. Unfortunately, OPMN is not installed along with ODI, and ODI 10g users who are really at ease with the old Java Wrapper are a little bit puzzled by OPMN, and ask: "How can I simply set up the agent as a service?". Well... although the Tanuki Service Wrapper is no longer available for free, and the agentservice.bat script lost, you can switch to another service wrapper for the same result. For example, Yet Another Java Service Wrapper (YAJSW) is a good candidate. To configure a standalone agent with YAJSW: download YAJSW Uncompress the zip to a folder (called %YAJSW% in this example) Configure, start and test your standalone agent. Make sure that this agent is loaded with all the required libraries and drivers, as the service will not load dynamically the drivers added subsequently in the /drivers directory. Retrieve the PID of the agent process: Open Task Manager. Select View Select Columns Select the PID (Process Identifier) column, then click OK In the list of processes, find the java.exe process corresponding to your agent, and note its PID. Open a command line prompt in %YAJSW%/bat and run: genConfig.bat <your_pid> This command generates a wrapper configuration file for the agent. This file is called %YAJSW%/conf/wrapper.conf. Stop your agent. Edit the wrapper.conf file and modify the configuration of your service. For example, modify the display name and description of the service as shown in the example below. Important: Make sure to escape the commas in the ODI encoded passwords with a backslash! In the example below, the ODI_SUPERVISOR_ENCODED_PASS contained a comma character which had to be prefixed with a backslash. # Title to use when running as a console wrapper.console.title=\"AGENT\" #******************************************************************** # Wrapper Windows Service and Posix Daemon Properties #******************************************************************** # Name of the service wrapper.ntservice.name=AGENT_113 # Display name of the service wrapper.ntservice.displayname=ODI Agent # Description of the service wrapper.ntservice.description=Oracle Data Integrator Agent 11gR3 (11.1.1.3.0) ... # Escape the comma in the password with a backslash. wrapper.app.parameter.7 = -ODI_SUPERVISOR_ENCODED_PASS=fJya.vR5kvNcu9TtV\,jVZEt Execute your wrapped agent as console by calling in the command line prompt: runConsole.bat Check that your agent is running, and test it again.This command starts the agent with the configuration but does not install it yet as a service. To Install the agent as service call installService.bat From that point, you can view, start and stop the agent via the windows services. Et voilà ! Two final notes: - To modify the agent configuration, you must uninstall/reinstall the service. For this purpose, run the uninstallService.bat to uninstall it and play again the process above. - To be able to uninstall the agent service, you should keep a backup of the wrapper.conf file. This is particularly important when starting several services with the wrapper.

Read the article

Don’t Kill the Password

- by Anthony Trudeau

A week ago Mr. Honan from Wired.com penned an article on security he titled “Kill the Password: Why a String of Characters Can’t Protect Us Anymore.” He asserts that the password is not effective and a new solution is needed. Unfortunately, Mr. Honan was a victim of hacking. As a result he has a victim’s vendetta. His conclusion is ill conceived even though there are smatterings of truth and good advice. The password is a security barrier much like a lock on your door. In of itself it’s not guaranteeing protection. You can have a good password akin to a steel reinforced door with the best lock money can buy, or you can have a poor password like “password” which is like a sliding lock like on a bathroom stall. But, just like in the real world a lock isn’t always enough. You can have a lock, security system, video cameras, guard dogs, and even armed security guards; but none of that guarantees your protection. Even top secret government agencies can be breached by someone who is just that good (as dramatized in movies like Mission Impossible). And that’s the crux of it. There are real hackers out there that are that good. Killer coding ninja monkeys do exist! We still have locks on our doors, because they still serve their role. Passwords are no different. Security doesn’t end with the password. Most people would agree that stuffing your mattress with your life savings isn’t a good idea even if you have the best locks and security system. Most people agree its safest to have the money in a bank. Essentially this is compartmentalization. Compartmentalization extends to the online world as well. You’re at risk if your online banking accounts are linked to the same account as your social networks. This is especially true if you’re lackadaisical about linking those social networks to outside sources including apps. The object here is to minimize the damage that can be done. An attacker should not be able to get into your bank account, because they breached your Twitter account. It’s time to prioritize once you’ve compartmentalized. This simply means deciding how much security you want for the different compartments which I’ll call security zones. Social networking applications like Facebook provide a lot of security features. However, security features are almost always a compromise with privacy and convenience. It’s similar to an engineering adage, but in this case it’s security, convenience, and privacy – pick two. For example, you might use a safe instead of bank to store your money, because the convenience of having your money closer or the privacy of not having the bank records is more important than the added security. The following are lists of security do’s and don’ts (these aren’t meant to be exhaustive and each could be an article in of themselves): Security Do’s: Use strong passwords based on a phrase Use encryption whenever you can (e.g. HTTPS in Facebook) Use a firewall (and learn to use it properly) Configure security on your router (including port blocking) Keep your operating system patched Make routine backups of important files Realize that if you’re not paying for it, you’re the product Security Don’ts Link accounts if at all possible Reuse passwords across your security zones Use real answers for security questions (e.g. mother’s maiden name) Trust anything you download Ignore message boxes shown by your system or browser Forget to test your backups Share your primary email indiscriminately Only you can decide your comfort level between convenience, privacy, and security. Attackers are going to find exploits in software. Software is complex and depends on other software. The exploits are the responsibility of the software company. But your security is always your responsibility. Complete security is an illusion. But, there is plenty you can do to minimize the risk online just like you do in the physical world. Be safe and enjoy what the Internet has to offer. I expect passwords to be necessary just as long as locks.

Read the article

OSB and Coherence Integration

- by mark.ms.smith

Anyone who has tried to manage Coherence nodes or tried to cache results in OSB, will appreciate the new functionality now available. As of WebLogic Server 10.3.4, you can use the WebLogic Administration Server, via the Administration Console or WLST, and java-based Node Manager to manage and monitor the life cycle of stand-alone Coherence cache servers. This is a great step forward as the previous options mainly involved writing your own scripts to do this. You can find an excellent description of how this works at James Bayer’s blog. You can also find the WebLogic documentation here.As of Oracle Service Bus 11gR1 (11.1.1.3.0), OSB now supports service result caching for Business Bervices with Coherence. If you use Business Services that return somewhat static results that do not change often, you can configure those Business Services to cache results. For Business Services that use result caching, you can control the time to live for the cached result. After the cached result expires, the next Business Service call results in invoking the back-end service to get the result. This result is then stored in the cache for future requests to access. I’m thinking that this caching functionality would be perfect for some sort of cross reference data that was refreshed nightly by batch. You can find the OSB Business Service documentation here.Result Caching in a dedicated JVMThis example demonstrates these new features by configuring a OSB Business Service to cache results in a separate Coherence JVM managed by WebLogic. The reason why you may want to use a separate, dedicated JVM is that the result cache data could potentially be quite large and you may want to protect your OSB java heap.In this example, the client will call an OSB Proxy Service to get Employee data based on an Employee Id. Using a Business Service, OSB calls an external system. The results are automatically cached and when called again, the respective results are retrieved from the cache rather than the external system.Step 1 – Set up your Coherence Server Via the OSB Administration Server Console, create your Coherence Server to be used as the results cache.Here are the configured Coherence Server arguments from the Server Start tab. Note that I’m using the default Cache Config and Override files in the domain.-Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=256m -Dtangosol.coherence.override=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-override.xml -Dtangosol.coherence.cluster=OSB-cluster -Dtangosol.coherence.cacheconfig=/app/middleware/jdev_11.1.1.4/user_projects/domains/osb_domain2/config/osb/coherence/osb-coherence-cache-config.xml -Dtangosol.coherence.distributed.localstorage=true -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dcom.sun.management.jmxremote Just incase you need it, here is my Coherence Server classpath:/app/middleware/jdev_11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar: /app/middleware/jdev_11.1.1.4/modules/features/weblogic.server.modules.coherence.server_10.3.4.0.jar: /app/middleware/jdev_11.1.1.4/oracle_osb/lib/osb-coherence-client.jarBy default, OSB will try and create a local result cache instance. You need to disable this by adding the following JVM parameters to each of the OSB Managed Servers:-Dtangosol.coherence.distributed.localstorage=false -DOSB.coherence.cluster=OSB-clusterIf you need more information on configuring a remote result cache, have a look at the configuration documentration under the heading Using an Out-of-Process Coherence Cache Server.Step 2 – Configure your Business Service Under the respective Business Service Message Handling Configuration (Advanced Properties), you need to enable “Result Caching”. Additionally, you need to determine what the cache data will be keyed on. In the example below, I’m keying it on the unique Employee Id.The Results As this test was on my laptop, the actual timings are just an indication that there is a benefit to caching results. Using my test harness, I sent 10,000 requests to OSB, all with the same Employee Id. In this case, I had result caching disabled.You can see that this caused the back end Business Service (BS_GetEmployeeData) to be called for each request. Then after enabling result caching, I sent the same number of identical requests.You can now see the Business Service was only invoked once on the first request. All subsequent requests used the Results Cache.

Search Results

Search found 2788 results on 112 pages for 'symantec endpoint protect'.

Page 87/112 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94 | Next Page >

- by user436118

- by user436118

- by Kazuo

- by Rick Strahl

- by Tarun Arora

- by Jonathan Bourke

- by Jonathan Bourke

- by Asian Angel

- by ultan o'broin

- by ultan o'broin

- by Asian Angel

- by Jose Matias

- by techsjs2012

- by Christopher House

- by arungupta

- by david.talamelli

- by Ryan Rosario

- by charlie.mott

- by Mat Keep

- by Pinal Dave

- by fx.nicolas

- by Anthony Trudeau

- by mark.ms.smith

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94 | Next Page >