Search Results

Search found 2850 results on 114 pages for 'typing lag'.

Page 87/114 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• CPU Lockup when loading folder of bookmarks in Firefox

  - by Gary M. Mugford

  I am running Firefox 3.6 on WinXPSP3 on a duo Core machine with 4G of memory. I am also running Avast! free anti-virus and ZoneAlarm free firewall, both latest versions. Within the last month, my service provider basically forced me to upgrade to a Docsis 3.0 compliant modem (offered me a deal I couldn't turn down). At that point, I also upgraded to FF3.6. Basically, I am not unhappy with many aspects of this switchover, EXCEPT, when I now load a folder of bookmarks (anywhere from 10 to 38) I get nothing like the load times I experienced a couple of months back. It's taking minutes rather than seconds. And the first bookmark in one of the folders, GMail, rarely loads before timing out. I have used the old trick of powering off the cable modem before my day's work. This used to fix 'load-lag' in the old days. I have switched from my ISP's DNS server to Google, OpenDNS and back. And nothing seems to work currently. It's not my DNS cache. That's been flushed and secondary computers also have the same issue when loading folders. I have watched the CPU usage and loading the folder will send VSMon (ZoneAlarm) usage over 40 percent, AVastSvc (Avast!) over 30 and Firefox will then push the needle to 100. There's a brief burst by SVCHost when the others falter in devouring cycles. Then everything subsides to single digits once the last tab is loaded. The only other nominal nastiness is VSMon ALWAYS hitting 50 percent when ANY program starts downloading content from the internet. If I shutdown ZoneAlarm (and VSMon with it), the same slow loading takes place, but this time System is running 50% plus, again driving the usage to 100 per cent. I have my doubts FF3.6 vs FF3.5 is an issue, since the other computers are still running 3.5 and suffer the same issue. Those computers are on, but inactive, most of the time, being backups. Obviously, when the CPU hits 100, I can't do much of anything in FireFox OR in other programs. Video play through WMPC or VLC is extremely choppy, although it doesn't seem to affect the audio. Any ideas what I can try next? Thanks, GM

  Read the article

• Airport Express chokes Wi-Fi for a few seconds, several times per hour. Any idea why?

  - by user13727

  I'm using a MacBookPro connected to an AiportExpress' Wi-FI network. Every once in a while, the Wi-Fi will choke up and either drop some packets, or lag horribly for several seconds. I'm losing hair over this because every time I chat on Skype, the call hangs randomly due to this problem. Any idea what's wrong? Some more details: two networks are set up: 2.4Ghz and 5Ghz, and the issue happens on both the network uses WPA2 Personal for security the Airport is in the same room with my computer the Airport is fairly new, bought this summer, model number off the back: A1392 tried connecting to a neighbours wifi to see if it's a problem with my computer, or interference. It's not, it doesn't happen on their network. tried resetting it several times tried changing channels manually Ping results are below, so you can see what I'm talking about. EDIT: 10.0.1.1 is the Airport's IP 64 bytes from 10.0.1.1: icmp_seq=1795 ttl=255 time=0.813 ms 64 bytes from 10.0.1.1: icmp_seq=1796 ttl=255 time=3.335 ms 64 bytes from 10.0.1.1: icmp_seq=1797 ttl=255 time=3.403 ms 64 bytes from 10.0.1.1: icmp_seq=1798 ttl=255 time=3.414 ms 64 bytes from 10.0.1.1: icmp_seq=1799 ttl=255 time=3.227 ms 64 bytes from 10.0.1.1: icmp_seq=1800 ttl=255 time=3.274 ms 64 bytes from 10.0.1.1: icmp_seq=1801 ttl=255 time=3.253 ms 64 bytes from 10.0.1.1: icmp_seq=1802 ttl=255 time=3.292 ms >>>> choke starts <<< 64 bytes from 10.0.1.1: icmp_seq=1803 ttl=255 time=53.977 ms 64 bytes from 10.0.1.1: icmp_seq=1804 ttl=255 time=35.049 ms 64 bytes from 10.0.1.1: icmp_seq=1805 ttl=255 time=19.820 ms >>>> choke ends <<< 64 bytes from 10.0.1.1: icmp_seq=1806 ttl=255 time=0.716 ms 64 bytes from 10.0.1.1: icmp_seq=1807 ttl=255 time=0.705 ms 64 bytes from 10.0.1.1: icmp_seq=1808 ttl=255 time=0.919 ms 64 bytes from 10.0.1.1: icmp_seq=1809 ttl=255 time=0.659 ms 64 bytes from 10.0.1.1: icmp_seq=1810 ttl=255 time=0.877 ms 64 bytes from 10.0.1.1: icmp_seq=1811 ttl=255 time=0.679 ms 64 bytes from 10.0.1.1: icmp_seq=1812 ttl=255 time=0.854 ms 64 bytes from 10.0.1.1: icmp_seq=1813 ttl=255 time=0.644 ms 64 bytes from 10.0.1.1: icmp_seq=1814 ttl=255 time=3.779 ms ... time passes .. 64 bytes from 10.0.1.1: icmp_seq=1599 ttl=255 time=0.674 ms 64 bytes from 10.0.1.1: icmp_seq=1600 ttl=255 time=0.930 ms 64 bytes from 10.0.1.1: icmp_seq=1601 ttl=255 time=0.665 ms 64 bytes from 10.0.1.1: icmp_seq=1602 ttl=255 time=1.085 ms Request timeout for icmp_seq 1603 Request timeout for icmp_seq 1604 64 bytes from 10.0.1.1: icmp_seq=1605 ttl=255 time=104.969 ms 64 bytes from 10.0.1.1: icmp_seq=1606 ttl=255 time=11.521 ms 64 bytes from 10.0.1.1: icmp_seq=1607 ttl=255 time=0.926 ms 64 bytes from 10.0.1.1: icmp_seq=1608 ttl=255 time=0.993 ms 64 bytes from 10.0.1.1: icmp_seq=1609 ttl=255 time=0.745 ms And the Signal-Noise ratio:

  Read the article

• Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

  - by Abner

  Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

  Read the article

• High CPU usage - symptoms moving from server to server after bouncing

  - by grt3kl

  First off, I apologize if I didn't include enough information to properly troubleshoot this issue. This sort of thing isn't my specialty, so it is a learning process. If there's something I need to provide, please let me know and I'll be happy to do what I can. The images associated with my question are at the bottom of this post. We are dealing with a clustered environment of four WebLogic 9.2 Java application servers. The cluster utilizes a round-robin load algorithm. Other details include: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04) BEA JRockit(R) (build R27.4.0-90_CR352234-91983-1.5.0_12-20071115-1605-linux-x86_64, compiled mode) Basically, I started looking at the servers' performance because our customers are seeing lots of lag at various times of the day. Our servers should easily handle the loads they are given, so it's not clear what's going on. Using HP Performance Manager, I generated some graphs that indicate that the CPU usage is completely out of whack. It seems that, at any given point, one or more of the servers has a CPU utilization of over 50%. I know this isn't particularly high, but I would say it is a red flag based on the CPU utilization of the other servers in the WebLogic cluster. Interesting things to note: The high CPU utilization was occurring only on server02 for several weeks. The server crashed (extremely rare; we are not sure if it's related to this) and upon starting it back up, the CPU utilization was normal on all 4 servers. We restarted all 4 managed servers and the application server (on server01) yesterday, on 2/28. As you can see, server03 and server04 picked up the behavior that was seen on server02 before. The CPU utilization is a Java process owned by the application user (appown). The number of transactions is consistent across all servers. It doesn't seem like any one server is actually handling more than another. If anyone has any ideas or can at least point me in the right direction, that would be great. Again, please let me know if there is any additional information I should post. Thanks!

  Read the article

• HOWTO: Disable complex password policy on Hyper-V Server 2008?

  - by Ian Boyd

  How do you disable the password complexity requirements on a Microsoft Hyper-V Server 2008 R2? Keep in mind that when you log into the server, the only UI you have is: And you cannot run gpedit.msc: C:\Users\Administrator>gpedit.msc 'gpedit.msc' is not recognized as an internal or external command, operable program or batch file. because there are no .msc snap-ins installed with Microsoft Hyper-V Server 2008 R2. The problem comes when you're trying to add an account to the server, so you can manage it, but it doesn't like most passwords: And, predictably, typing NET HELPMSG 2245 gives you The password does not meet the password policy requirements. Check the minimum p assword length, password complexity and password history requirements. i hoped it would have been a friendly user experience, and either: offered to disable the password policy tell me how to disable the password policy tell me how to check the minimum password length, password complexity and password history requirements. Password Complexity Requirements The Microsoft's default password complexity for Server Core is: Passwords cannot contain the user’s account name or parts of the user’s full name that exceed two consecutive characters. Passwords must be at least six characters in length. Passwords must contain characters from three of the following four categories: 1.English uppercase characters (A through Z). 2.English lowercase characters (a through z). 3.Base 10 digits (0 through 9). 4.Non-alphabetic characters (for example, !, $, #, %). External links Technet Forums: Hyper-V Server disable complex passwords Technet: Passwords must meet complexity requirements of the installed password filter Update: 2k views? So many people keep coming coming to it: up-vote it!

  Read the article

• iptables issue on plesk

  - by Fred Rufin

  i don't know how to open a specific port (rtmp=1935) on my CentOS server using Plesk or itables. I created new rules for port 1935 i/o using Plesk/Modules/Firewall but this doesn't work. Nmap scanning tells me this : 1935/tcp filtered rtmp . So i decided to have look at my iptable using SSH (iptables -L), and iptables seems to contain my rules (tcp spt:macromedia-fcs): Chain INPUT (policy DROP) target prot opt source destination VZ_INPUT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain OUTPUT (policy DROP) target prot opt source destination VZ_OUTPUT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain VZ_FORWARD (1 references) target prot opt source destination Chain VZ_INPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpts:filenet-tms:65535 ACCEPT udp -- anywhere anywhere udp dpts:filenet-tms:65535 ACCEPT tcp -- anywhere anywhere tcp dpt:cddbp-alt ACCEPT tcp -- anywhere anywhere tcp dpt:pcsync-https ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT tcp -- anywhere anywhere tcp dpt:macromedia-fcs ACCEPT udp -- localhost.localdomain localhost.localdomain Chain VZ_OUTPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp spt:http ACCEPT tcp -- anywhere anywhere tcp spt:ssh ACCEPT tcp -- anywhere anywhere tcp spt:smtp ACCEPT tcp -- anywhere anywhere tcp spt:pop3 ACCEPT tcp -- anywhere anywhere tcp spt:domain ACCEPT udp -- anywhere anywhere udp spt:domain ACCEPT tcp -- anywhere anywhere ACCEPT udp -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp spt:cddbp-alt ACCEPT tcp -- anywhere anywhere tcp spt:pcsync-https ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT tcp -- anywhere anywhere tcp spt:macromedia-fcs ACCEPT udp -- localhost.localdomain localhost.localdomain My rules seems to be OK but there is no connection to 1935 port using a browser. I can connect to this port with SSH (typing "wget myServerIP:1935") but maybe this is because it is an SSH tunelling ? I don't know how to do.

  Read the article

• Useful Excel keyboard shortcuts

  - by Ben Lings

  What keyboard shortcuts do you use in Excel? Things I've discovered recently and found very useful are: Shift + Space - select the current row Ctrl + Space - select the current column Ctrl + Shift + Space - select the block of contiguous cell Ctrl + + - Insert (as in the context menu). If the current row is selected, will insert a new row. Ctrl + - - Delete (as in the context menu). If the current row is selected, will delete entire row. What (apart from the normal cut, copy, paste, etc) do you use? Ctrl + 1 to open the Format dialog. Shift + F2 to add/edit a cell comment. Shift + F2, followed by Esc to select the current cell comment, which can then be moved around with the arrow keys (????) or deleted by pressing Del. Ctrl + ???? to move to the last non-blank cell in a series. This is usually the edge of a table, but not if you have blank cells in the path. Pressing End followed by an arrow key does the same thing. Alt + F11 to open the VBA editor. Alt + = to start a SUM() formula and go straight to selecting cells to be summed. Ctrl + G or F5 to jump to a cell by typing its coordinates (e.g. C3) Ctrl + Home to jump to the top left, usually A1 unless you you are in a frozen split view, in which case it will jump to the top left of the "data" area. Ctrl + ; and Ctrl + Shift + ; to insert the current date and time, respectively. I know Ben Lings already posted this one, but I find it indispensable.

  Read the article

• Active RDP session over VPN getting disconnected

  - by Wandering Penguin

  I am having seemingly random disconnects of active RDP sessions (I am actively typing or otherwise interacting with the desktop) when connected over the VPN connection. The attempted to reconnect 1/20 pops up and proceeds all the way through 20 then drops. Once the session drops I can open a new session and connect again. This started happening about a week ago, The VPN connection is an IPSec VPN connection from a SonicWall NSA 2400. The NIC drivers are up to date. The VPN client is up to date. The firmware on the SonicWall is up to date (both regular and the early-release versions work the same). I have attempted to connect over three ISPs all with the same behavior. Two different workstations were used to test the VPN connection. The same behavior occurs when connecting to a domain workstation or server. If I am within the firewall I can connect to the same workstations and servers with the disconnect. The VPN connection has "enable fragmented packet handling" and "ignore DF (don't fragment) bit" set. Is there something I am missing in where I am looking for the problem?

  Read the article

• How can I get HTTPD to serve the html/php files and not list/index them when they are in folder for virtual host. Using Centos 6.0

  - by LaserBeak

  My virtual hosts are configured as below, initally I could not even get to the /public_html/ directory when typing example.com and apache would just serve me up the default welcome page, I would also get the error: Directory index forbidden by Options directive: /var/www/html/example.com/public_html/ in the log . After editing the welcome.conf page (- Index) so it does not show again when I now type example.com the/public_html/ contents (Index.php) are indexed in the browser. Where as I want it to actually execute and diplay the index.php page. vhost.conf , located in etc/httpd/vhost.d/ NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName localhost ServerAlias localhost.example.com DocumentRoot /var/www/html/example.com/public_html/ ErrorLog /var/www/html/example.com/logs/error.log CustomLog /var/www/html/example.com/logs/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName example.org ServerAlias www.example.org DocumentRoot /var/www/html/example.org/public_html/ ErrorLog /var/www/html/example.org/logs/error.log CustomLog /var/www/html/example.org/logs/access.log combined </VirtualHost> httpd.conf, settings on default, added onto end: Include /etc/httpd/vhosts.d/*.conf Root directories: DocumentRoot "/var/www/html"

  Read the article

• Oracle 11gR2: NLS_CHARACTERSET accidentally removed with an UPDATE-Query

  - by Marco Nätlitz

  Hi folks, I have a fresh installation of Oracle 11gr2_x64 on CentOS. After the installation I wanted to get productive and started to import my dumps. One of the dumps caused characterset error so I tried to change the systems character-set to the one specified in the dump. I ran a statement like this: UPDATE nls_database_parameters SET parameter='WS....' WHERE parameter=’NLS_CHARACTERSET’; As you can see: I have written the value of the character-set in the parameter column instead of the value column. I guess I was just too much thinking about the problem instead of checking what I am typing there. After the query the parameter "NLS_CHARACTERSET" is gone and the server reports that the characterset is "(null)". I want to put the "NLS_CHARACTERSET" paramater back in the table but don't know how. If I try to do something like this INSERT INTO nls_database_parameters (PARAMETERS, VALUE) VALUES ("NLS_CHARACTERSET", "AL32UTF8"); I get the error: Fehler bei Befehlszeile:1 Spalte:84 Fehlerbericht: *Cause: SQL-Fehler: ORA-00984: Spalte hier nicht zulässig *Action: 00984. 00000 - "column not allowed here" Sorry that the error message is in German but it contains the Oracle error code. Do you have any idea how I can fix that? Thanks and best regards Marco

  Read the article

• Cygwin - Repo with Separate Git/Working Dir Doesn't Work

  - by Kyle Lacy

  Since I've switched to OS X and Vim, I've found it easiest to manage all of my 'dotfiles' (all of my configuration files and miscellaneous scripts) with Git. Having already set up my dotfiles in a repo following this tutorial, I figured it would also be easy enough to migrate all of my settings into my Cygwin setup on my Windows partition. Already having the repo setup on Github, I simply clone'd the repo, and moved all of the files over to my home directory, making it a mirror of my OS X home directory. Unfortunately, I cannot seem to use the actual repo any further within Cygwin. The problem is that I cannot use my dotfiles repo with git within Cygwin. The setup is unique from most normal git repos, in that the working directory and the git directory are in different locations. Specifically, the working directory is $HOME (/Users/kyle on OS X, /home/kyle in Cygwin), and the git repo is $HOME/.dotfiles.git. So, if I wanted to get the status of the repo, for example, I would type the following command (which I alias to reduce typing, of course): git --work-tree=$HOME --git-dir=$HOME/.dotfiles.git status -uno While this works fine on OS X, this refuses to work within Cygwin. Regardless of whether or not I use my alias, or whether or not I substitute $HOME by hand, I get the following git error: fatal: Not a git repository: /home/Kyle/dotfiles/.git/modules/.build/git I don't understand where this error comes from, but the path /home/Kyle/dotfiles was the original location of the git repo when I initially cloned it. Additionally, it's important to note that the repo relies heavily on submodules. If specifics are necessary, the repo in question can be found on GitHub. The commands I ran to setup the repo in Cygwin can also be found within the Readme file.

  Read the article

• External DNS and IIS Webserver requirement for Outlook Anywhere 2007 ?

  - by Albert Widjaja

  Hi, I just would like some clarification about which External hostname / DNS entries that I need to publish in my external facing DNS server to enable Outlook Anywhere on my Exchange Server 2007 for external user: ExCAS01.domain.com - Exchange CAS A Record Autodiscover.domain.com - Autodiscover CNAME to the CAS Server above _autodiscover._tcp.domain.com - SRV type record and do I have to expect anything by typing this address in bowser "https://autodiscover.domain.com/AutoDiscover/AutoDiscover.xml" ? because i get request time out at the moment. here are the error log from https://testexchangeconnectivity.com: Host Excas01.domain.com couldn't be resolved in DNS Exception details: Message: The requested name is valid, but no data of the requested type was found Type: System.Net.Sockets.SocketException Stack trace: at System.Net.Dns.GetAddrInfo(String name) at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at Microsoft.Exchange.Tools.ExRca.Tests.ResolveHostTest.PerformTestReally() Host autodiscover.domain.com couldn't be resolved in DNS Exception details: Message: The requested name is valid, but no data of the requested type was found Type: System.Net.Sockets.SocketException Stack trace: at System.Net.Dns.GetAddrInfo(String name) at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at Microsoft.Exchange.Tools.ExRca.Tests.ResolveHostTest.PerformTestReally() Attempting to locate SRV record _autodiscover._tcp.domain.com in DNS. The Autodiscover SRV record wasn't found in DNS.

  Read the article

• 426 Connection closed; transfer aborted.

  - by Jiaoziren

  Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

  Read the article

• mysql.proc has gone corrupt. How can I fix it?

  - by Metalcoder

  I have a server running Debian 5.0, and MySQL. Suddendly, MySQL stopped working, and after many attempts to fix it, I decided to reinstall it. I installed MySQL 5.1.63, and when started it goes to safe mode. I made some typing, and when I executed mysql_upgrade as root, it complained: ... Running 'mysql_fix_privilege_tables'... ERROR 1548 (HY000) at line 1111: Cannot load from mysql.proc. The table is probably corrupted ERROR 1064 (42000) at line 1112: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'sqlstate 'HY000' set message_text='Unexpected content found in the performance_s' at line 1 ERROR 1548 (HY000) at line 1125: Cannot load from mysql.proc. The table is probably corrupted FATAL ERROR: Upgrade failed I checked the mysql.proc table, and it's comment column was slightly different from my backup. -- My backup says: `comment` char(64) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL DEFAULT '', -- But it were: `comment` text CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, So, I restored my mysql database backup, and now they all match, but mysql_upgrade still trigger the same errors. I also tried do check and repair the mysql.proc table, but got no success.

  Read the article

• Web server with static IP from cable provider

  - by Dmitri

  I have a subscription to 5 static IP addresses. I want to run a web server from behind a router. My network config is as follows: Server's local address is 10.1.10.2, has IIS running on it, port 80 and 443 (IIS is not my fault, had to be done) the server's ip address is static, the subnet mask is 255.255.255.0, gateway is 10.1.10.1, which is the local address of the cable modem / router / gateway thingy. All looks to be in textbook order as far as the LAN goes. I can get to anything on my LAN from any computer on my LAN, whether they have static IP or get it through DHCP from the cable modem/router thingy. however, I have no internet access form any of my LAN computers. I called Comcast tech support and they say they can connect to my modem/router just fine and can actually use it to ping any computer on the internet or any computer on my LAN from the router/modem (i checked, myself, this is in fact the case). However, nothing on my LAN has internet connectivity. I tried pinging the DNS servers, nothing. I tried directly typing in web sites' IP addresses, nothing, so doesn't seem to be a DNS issue. Any Ideas? What malfunction of a router could be causing such weird behavior? nay ideas or educated guesses are very much appreciated.

  Read the article

• Postgresql server will not start

  - by Claudiu

  I'm on Windows 7. I restarted my computer. I then tried to connect to the database and got an error. I don't remember which one in particular but it was some connection issue. I decided to try to restart the server, so I clicked on "Restart server" from the start menu. This blocked. After a few minutes I killed the process and tried again, only to get a "The service is starting or stopping. Please try again later." message. I rebooted the computer again, tried to start again, and got the same error. I killed the pg_ctl process and tried starting it manually, but that didn't work either: C:\Users\DrClaud>cscript "C:\Program Files\PostgreSQL\8.3\scripts\serverctl.vbs" start wait Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. The PostgreSQL Server 8.3 service is starting................................... ....................................... The PostgreSQL Server 8.3 service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. The start command returned an error (2) Any ideas?

  Read the article

• Don't let the mouse wake up displays from standby

  - by progo

  I like to put my displays to powersave/standby mode when I leave the computer for a while. It would be ok if it weren't for oversensitive mouse. Sometimes the driver reads in some movement that's not visible to the naked eye (the cursor, that is) and it breaks the power save. It would wait for another 10 minutes before going back to its standby. My workaround is the following script bound to C-S-q: xlock -startCmd 'xset dpms 2 2 2' -endCmd 'xset dpms 600 1200 1300' -mode blank -echokeys -timeelapsed +usefirst By using xset I set the values to 2 seconds each before going to standby. It's not nice, anyway. Sometimes there are cool fortunes that I want to read before typing in the password. I could keep the cursor moving but it's cludgy. (By the way, xlock's option mousemotion doesn't help -- it just hides the cursor but the displays fire up nevertheless.) So the question: is there a way to make displays go standby and stay there until a keyboard key is pressed? I'm running gentoo and recent Xorg, but I hope the answer doesn't have to be distro-specific. Basically the answer can be as simple as how to enable/disable mouse within command line? It think that would do the job if DPMS doesn't know the idea.

  Read the article

• Macbook Pro 2010 Ethernet Jumbo Frame(9k MTU) Support?

  - by Troggy

  Has anyone been able to use jumbo frame support on their 2010 Macbook Pros? This is kind of negative news here, but I am seeing many reports that this is not available anymore due to Apple's choice of network card in the new machines. I cannot set my MTU speed over 1500 on my new 2010 MBP i7, but my old early 2008 MBP (Core2) has the 9000 MTU setting for use. Everything I have is setup to use jumbo frames and I thought apple kept that feature in their "pro" lineup. It sounds like the Mac Pro still has it. Did they decide to use a chipset that doesn't support it? I am trying to pinpoint some solid chipset numbers and the feature support. Maybe they just need to update the drivers? Is there some more official information about this feature? This might seem minor, but this is really frustrating if apple removed this feature from their pro laptop line. From what I have read so far, it sounds like I am not alone in my frustrations with this. http://discussions.info.apple.com/message.jspa?messageID=12258067 http://discussions.apple.com/thread.jspa?messageID=12130158 Anyone have any experience or further knowledge about this issue ... beyond typing my question into google and giving the top 5 results as answers? :)

  Read the article

• SQL SERVER – CXPACKET – Parallelism – Usual Solution – Wait Type – Day 6 of 28

  - by pinaldave

  CXPACKET has to be most popular one of all wait stats. I have commonly seen this wait stat as one of the top 5 wait stats in most of the systems with more than one CPU. Books On-Line: Occurs when trying to synchronize the query processor exchange iterator. You may consider lowering the degree of parallelism if contention on this wait type becomes a problem. CXPACKET Explanation: When a parallel operation is created for SQL Query, there are multiple threads for a single query. Each query deals with a different set of the data (or rows). Due to some reasons, one or more of the threads lag behind, creating the CXPACKET Wait Stat. There is an organizer/coordinator thread (thread 0), which takes waits for all the threads to complete and gathers result together to present on the client’s side. The organizer thread has to wait for the all the threads to finish before it can move ahead. The Wait by this organizer thread for slow threads to complete is called CXPACKET wait. Note that not all the CXPACKET wait types are bad. You might experience a case when it totally makes sense. There might also be cases when this is unavoidable. If you remove this particular wait type for any query, then that query may run slower because the parallel operations are disabled for the query. Reducing CXPACKET wait: We cannot discuss about reducing the CXPACKET wait without talking about the server workload type. OLTP: On Pure OLTP system, where the transactions are smaller and queries are not long but very quick usually, set the “Maximum Degree of Parallelism” to 1 (one). This way it makes sure that the query never goes for parallelism and does not incur more engine overhead. EXEC sys.sp_configure N'cost threshold for parallelism', N'1' GO RECONFIGURE WITH OVERRIDE GO Data-warehousing / Reporting server: As queries will be running for long time, it is advised to set the “Maximum Degree of Parallelism” to 0 (zero). This way most of the queries will utilize the parallel processor, and long running queries get a boost in their performance due to multiple processors. EXEC sys.sp_configure N'cost threshold for parallelism', N'0' GO RECONFIGURE WITH OVERRIDE GO Mixed System (OLTP & OLAP): Here is the challenge. The right balance has to be found. I have taken a very simple approach. I set the “Maximum Degree of Parallelism” to 2, which means the query still uses parallelism but only on 2 CPUs. However, I keep the “Cost Threshold for Parallelism” very high. This way, not all the queries will qualify for parallelism but only the query with higher cost will go for parallelism. I have found this to work best for a system that has OLTP queries and also where the reporting server is set up. Here, I am setting ‘Cost Threshold for Parallelism’ to 25 values (which is just for illustration); you can choose any value, and you can find it out by experimenting with the system only. In the following script, I am setting the ‘Max Degree of Parallelism’ to 2, which indicates that the query that will have a higher cost (here, more than 25) will qualify for parallel query to run on 2 CPUs. This implies that regardless of the number of CPUs, the query will select any two CPUs to execute itself. EXEC sys.sp_configure N'cost threshold for parallelism', N'25' GO EXEC sys.sp_configure N'max degree of parallelism', N'2' GO RECONFIGURE WITH OVERRIDE GO Read all the post in the Wait Types and Queue series. Additionally a must read comment of Jonathan Kehayias. Note: The information presented here is from my experience and I no way claim it to be accurate. I suggest you all to read the online book for further clarification. All the discussion of Wait Stats over here is generic and it varies from system to system. It is recommended that you test this on the development server before implementing on the production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Writing a script for ash?

  - by rumtscho

  My VPN is behaving funny sometimes, and I have to restart it often. I wanted to write a script which does that for me. It doesn't have to be anything fancy, just a shortcut for the commands I have to type into the terminal. More specifically: it will look at the running processes. If it finds a running vpnc process, it will kill it. Then it will start vpnc. I've written bash scripts of similar complexity, but now I don't have a bash, only an ash. Until now, the only difference I noticed is that there are much less commands available, but then, I don't use it very often. So I have some questions. Is writing ash scripts different than writing bash scripts? Is there something specific to consider when doing it? When the script is ready, how can I deploy it? For bash, I just put the executable file under /usr/lib and run it by typing the file name into the command line, will this work with ash? Are there any special pitfalls to watch out for in the script I want to write? I think that the killing process part may get hairy, if I write something that kills the wrong process, but even then running the script shouldn't break anything permanently, right?

  Read the article

• P2v options within a hyper-v environment.

  - by tony roth

  I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

  Read the article

• How a batch file runs on a remote machine started by PSEXEC

  - by user38780

  I am having an issue running a Batch file on a remote machine suing PSEXEC. The file runs but does not run like it does when run through remote desktop. The batch runs a file which is a 32 bit application, which opens multiple 16bit applications, this should all run under one ntvdm.exe (In one Memory Space). Through remote desktop the batch file runs under the explorer process, and works correctly opening only one ntvdm.exe. Using PSEXEC the batch runs but not under the explorer process, a separate ntvdm.exe is open for each process. I found running the batch from explorer in PSEXEC works, but comes up with a "File Download - Security Warning" eg. psexec.exe" \compname -u username -p passowrd -s -d -i 0 explorer C:\Program.bat I want to be able to run the batch successfully without receiving warnings, it is a local warning and not a network share warning. Possible to recreate warning typing "explorer C:\windows\system32\cmd.exe" in Run I would like to know if anyone knows of a way to get PSEXEC to open the batch file to run as though it was started by explorer. Or a way of removing the local "File Download - Security Warning" Thanks

  Read the article

• SSH garbling characters in vim/nano on remote server

  - by geerlingguy

  ... and it's driving me insane. Basically (this has been happening over the past couple months), I log into a few different CentOS servers (one Linode, another VPS, and a shared host to which I have shell access), running 5.5, 5.7, and 6, from my Mac running OS X Lion, using Terminal. Basically: $ ssh [email protected] [remote-host] $ nano somefile.txt Once I start editing the file, if I use the arrow keys to move around the cursor, or start deleting, then typing again, the cursor jumps around a bit, and if I save the file and reopen it, it's obvious that the cursor was, in fact, jumping all over the place on a line for no apparent reason. I end up getting things like "This is a neof text." When I had typed in (to the cursor-crazy editor) "This is a line of text." It's a big problem when it comes to editing configuration files, because I often have to edit one line, save and close, then reopen just to make sure that line is right... then edit another line... and it's getting quite annoying. I found Linode Lish Shell Vim and Nano rendering troubles: lines not appearing / cursor positions wrong, but I don't know if that relates much, since that's specifically referring to lish.

  Read the article

• What's the best way to telnet from a remote Windows PC without using RDP?

  - by Rob D.

  Three Networks: 10.1.1.0 - Mine 172.1.1.0 - My Branch Office 172.2.2.0 - My Branch Office's VOIP VLAN. My PC is on 10.1.1.0. I need to telnet into a Cisco router on 172.2.2.0. The 10.1.1.0 network has no routes to 172.2.2.0, but a VPN connects 10.1.1.0 to 172.1.1.0. Traffic on 172.1.1.0 can route to 172.2.2.0. All PCs on 172.1.1.0 are running Windows XP. Without disrupting anyone using those PCs, I want to open a telnet session from one of those PCs to the router on 172.2.2.0. I've tried the following: psexec.exe \\branchpc telnet 172.2.2.1 psexec.exe \\branchpc cmd.exe telnet 172.2.2.1 psexec.exe \\branchpc -c plink -telnet 172.2.2.1 Methods 1 and 2 both failed because telnet.exe is not usable over psexec. Method 3 actually succeeded in creating the connection, but I cannot login because the session registers my carriage return twice. My password is always blank because at the "Username:" prompt I'm effectively typing: Routeruser[ENTER][ENTER] It's probably time to deploy WinRM... Does anyone know of any other alternatives? Does anyone know how I can fix plink.exe so it only receives one carriage return when I use it over psexec?

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >