Search Results

Search found 10313 results on 413 pages for 'hardware sharing'.

Page 88/413 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Slow file copying/network browsing in Windows 7

    - by tomp
    The file copying on local discs and network shares, and browsing shared folders is much slower on the Windows 7 than it was on Windows XP. I'm sure everyone encountered this problem, I personally have seen it on many different computers. What would you recommend to speed up these operations?

    Read the article

  • Bad Intel DQ965GF motherboard? Fails memtest, but memory is good.

    - by Boden
    I've got a machine with a DQ965GF motherboard. Two days ago it started locking up hard. Ran memtest 3.3, 1.7, and TestMem 4. TestMem just freezes, memtest failed on moving 8 bit inversions. Letting memtest run eventually causes the system to restart. I pulled memory sticks one by one, and then replaced the memory with a couple of known good sticks. No luck. I switched power supplies, didn't help. Swapped video cards just to be safe. No help. When I start the machine I get a single beep before it POSTs. According to the manual, a single beep means: 1 beep - Refresh Error (with nothing on the screen and it is not a video problem) I'm assuming that the motherboard has failed since it's obviously not a RAM or power issue. Do you agree? NOTE: I also tried resetting BIOS defaults, and even flashed the BIOS to the latest version. I also ran the Mersenne Prime Test and the CPU seems to click along just fine. (Tried logging in to superuser with openid but it's not working for me today. Hope this gets through)

    Read the article

  • A PCI-to-PCI bridge cannot start

    - by midtiby
    Hi I'm trying to use a DeLock PCMCIA adapter, CardBus to 2 x FireWire to get firewire connectivity on my laptop. It worked a few weeks ago, but now I get the message. "This device cannot start (Code 10)" when I look it up in Device manager. Any ideas of how to get it up and running? I am running Windows XP SP3

    Read the article

  • Windows Network File Transfer to Samba server: “Are you sure you want to copy this file without its properties?”

    - by jimp
    I am transferring a lot of files to a new NAS based on OpenMediaVault, with the Samba 3.5.6 service running. I am transferring from Windows 7 64-bit to the NAS, and on some media files Windows is prompting about losing some property data across the transfer. I have never seen this before when transferring to Samba boxes I have built myself (vs this turnkey solution), so I'm guessing there must be a Samba setting I can change to preserve the file properties in question instead of permanently losing whatever they contain (Date Taken? Exposure? Flash Fired? etc). Or maybe I've just never encountered this before; I'm really not sure. I tried adding ea support = yes and store dos attributes = yes to the [global] section, but the problem remains. The Linux file system is ext4 mounted with user_xattr (full options: defaults,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) as Samba requires. Any ideas would be greatly appreciated. Thank you! Samba config: [global] workgroup = WORKGROUP server string = %h server include = /etc/samba/dhcp.conf dns proxy = no log level = 2 syslog = 2 log file = /var/log/samba/log.%m max log size = 1000 syslog only = yes panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes socket options = TCP_NODELAY IPTOS_LOWDELAY guest account = nobody load printers = no disable spoolss = yes printing = bsd printcap name = /dev/null unix extensions = yes wide links = no create mask = 0777 directory mask = 0777 use sendfile = no null passwords = no local master = yes time server = yes wins support = yes ea support = yes store dos attributes = yes Note: I found this related question, but it explains the loss due to the user trying to transfer from NTFS to FAT32.

    Read the article

  • How to get the installed Memory Type

    - by balexandre
    Windows 7 could be better at this, it tells everything about the computer CPU but only the Memory amount Microsoft should add information about DDR type, speed and maybe CL as well. While this never happens, What's the best and easy way to check the installed memory so we can buy and upgrade it? I was thinking a simple software so I don't need to install the full SiSoft Sandra for example, just looking for something small, only for the memory part.

    Read the article

  • OS X server large scale storage and backup

    - by user135217
    I really hope this question doesn't come across as trolling or asking for buying advice. It's not intended. I've just started working for a small ad agency (40 employees). I actually quit being a system administrator a few years ago (too stressful!), but the company we're currently outsourcing our IT stuff to is doing such a bad job that I've felt compelled to get involved and do what I can to improve things. At the moment, all the company's data is stored on an 8TB external firewire drive attached to a Mac Mini running OS X Server 10.6, which provides filesharing (using AFP) for the whole company. There is a single backup drive, which is actually a caddy containing two 3TB hard drives arranged in RAID 0 (arrggghhhh!), which someone brings in as and when and copies over all the data using Carbon Copy Cloner. That's the entirety of the infrastructure, and the whole backup and restore strategy. I've been having sleepless nights. I've just started augmenting the backup process with FreeBSD, ZFS, sparse bundles and snapshot sends to get everything offsite. I think this is a workable behind the scenes solution, but for people's day to day use I'm struggling. Given the quantity and importance of the data, I think we should really be looking towards enterprise level storage solutions, high availability and so on, but the whole company is all Mac all the time, and I cannot find equipment that will do what we need. No more Xserve; no rack storage; no large scale storage at all apart from that Pegasus R6 that doesn't seem all that great; the Mac Pro has fibre channel, but it's not a real server and it's ludicrously expensive; Xsan looks like it's on the way out; things like heartbeatd and failoverd have apparently been removed from Lion Server; the new Mac Mini only has thunderbolt which severely limits our choices; the list goes on and on. I'm really, really not trying to troll here. I love Macs, but I just genuinely don't know where I'm supposed to look for server stuff. I have considered Linux or FreeBSD and netatalk for serving files with all the server-y goodness those OSes bring, but some the things I've read make me wonder if it's really the way to go. Also, in my own (admittedly quite cursory) experiments with it, I've struggled to get decent transfer speeds. I guess there's also the possibility of switching everyone off AFP and making them use SMB or NFS, but I understand that this can cause big problems with resource forks and file locks. I figure there must be plenty of all Mac companies out there. If you're the sysadmin at one, what do you use? Any suggestions very gratefully received.

    Read the article

  • Looking for a good computer repair kit

    - by johnny
    I'm afraid I'll get ripped if I get the generic kit from Tigerdirect or whatever. For clarity this is not software I am after but physical tools. It should include something for occassional soldering of electronics, crimper, other things I cannot remember. Hoping for ideas or product links (yes I am searching also). Thank you.

    Read the article

  • Computer does not boot after ram upgrade

    - by Calmarius
    I have a Dell Optiplex GX520 desktop (it's abount 5 yr old) PC with 512 MB DDR2 RAM. Since my computer always swapping I thought I should upgrade my RAM. I bought a Kingmax 2GB DDR2 RAM. But my system does not boot. The status leds are on 2 and 4. The user manual says 'video card failure' wtf? I put back the original module and everything works. I tried many combinations. When I leave the old 512 RAM in and put the 2GB next to it to the other socket my system completes the POST and I'm able to enter the BIOS menu. It says my system has 2.5 GB installed, one 0.5GB and one 2GB in dual asymmetric channel mode. It's seemingly right. Exiting the BIOS setup GRUB loads successfully, but when I try to boot Ubuntu it crashes with kernel panic immediately. Trying to load Windows XP does not get past the loading screen, it crashes with 0x8E stop error. Does this mean the ram I bought is faulty? Or is it just mean that the memory module I bought is too new to be handled my computer? I this case I may exchange the RAM with my friends. No other computer is in my house (my very old box has DDR1 ram, my systers new box has DDR3 ones. I can't plug my memory in neither one.) I'm going to return the RAM to store to replace it with a better one tomorrow. Is there any hope to get this new module work?

    Read the article

  • notebook display problem

    - by kpower
    I have RoverScan Voyager notebook. It worked good for a few months. But some day I turned it on and saw that it displays badly. I mean, picture that should be displayed by monitor is copied six times and displayed on screen (6 same small pictures, not crossed each other). And the picture itself is bad - it displayed as interchange of vertical lines (it's really hard to see real picture or distinguish some details on it - it is distorted badly). Can you suppose, what's the reason? And what can I do to solve the problem?

    Read the article

  • Do I need DELL OpenManage to generate snmp traps on RAID degradation?

    - by jishi
    I need to setup surveillance on all our servers to spot any RAID degradation in time. However, not all of our servers have OpenManage installed, and since they are in production I don't like the idea of installing it on them. Therefor: Is it necessary to have it installed in order to get an event-log for any degradation of the RAID? Because, if I get an event-log I can send an SNMP trap, if I understand it correctly. I thought it was the driver that responsible for the event-logging, but on a machine that recently had a degradation, I can't seem to find any log event for it.

    Read the article

  • What's the point of 6.0GB/s SATA harddrives?

    - by earlz
    So I've recently been seeing on the higher grade motherboards SATA 6.0gb/s ports. That's all fine and dandy. Extra room for expansion.. Now, my question is why are people already selling SATA 6.0GB/s port containing harddrives when it is already known that harddrives aren't even saturating 3.0GB/s(even server grade). What is the point of this?

    Read the article

  • Can I upgrade my computer to run SC2 smoothly?

    - by Citizen
    My desktop is: ACPI x86 AMD Athlon x2 Dual Core 3600 1.9ghz 1 gig ram NVIDIA Geforce 7300 I'm running 32 bit windows vista. My budget is ~$250 When I play SC2, its incredibly slow and I have to play with the graphics on the LOWEST settings. What can/should I buy (specifically) to get this to run SC2 smoothly? Are max setting possible? I'm not sure what I can get that will be for sure compatible + will actually do the trick. Or is my computer simply too old?

    Read the article

  • Hard Drive Light Emulator

    - by ProfKaos
    I've just got a new Dell Inspiron, and I'm a little disconcerted without the reassurance of a flashing hard drive light, especially with long installs. Is there something that can reveal HDD activity onscreen, e.g. in the system tray?

    Read the article

  • What happens if I pierce a TFT monitor?

    - by sharptooth
    What happens if I pierce a TFT monitor screen with something sharp (say a nail)? Will only the pierced region malfunction or the whole monitor screen? There's an opinion that in this case the entire screen will "flow out" (more specifically - "liquid crystals will flow out") and stop working completely. Is that truth or an urban legend?

    Read the article

  • Why would a machine ruin three "power supply"s?

    - by Moshe
    A client of mine has an XP era eMachines. The power supply has died and been replaced 3 times. I've discharged the motherboard and checked the surge protector. In the middle of a scan with ComboFix, the machine died. It powers on and hangs before the BIOS and shows a solid yellow light. I believe the model # is T5062 or something like that. Aside from a bad outlet, what would cause the PSU to die a few times?

    Read the article

  • Windows 8 Pro Homegroup Not Allowing Access to Shared Files

    - by Jack Herr
    I have two pc's and a laptop. With all three running Windows 7, homegroup worked perfectly, with all computers able to access the files on the others exactly as one would expect. I installed Windows 8 Pro, which I downloaded recently from the MSDN website, on the laptop. From the info on the MSDN website, I believe the version downloaded is the official release version, not a release candidate. The install preserved all settings, apps, and files. I cannot connect to the homegroup from the laptop. Well, not exactly. I joined the homegroup during the install, and later left and rejoined, that was advertised as being offered by one of the pc's (not sure why that one was picked and not the other or both). This homegroup appears in my "computer" folder in the file explorer, offering files from that pc. But it excludes documents (only the music, pix, videos, and playlists folders on the one computer appear). I can actually access those files from the laptop. But the Homegroup folder, which actually shows all the computers by account and computer name and includes documents from both computers, does not open those folders when clicked. The computers listed by name in the Network folder give me a login that doesn't work. It asks for a username and password, no combinations of which work. Further, the following error message appears before the login is even attempted: "The system cannot contact a domain controller to service the authentication request. Please try again later." The two windows 7 pc's continue to share all files, including documents, seemlessly. I can also get to the laptop shared files, which I shared during setup, from either pc. Any ideas?

    Read the article

  • Migrating a hard drive from one system to another in Windows 7

    - by Chris McGrath
    i am about to upgrade to a new laptop is it possible for me to just take my system drive and put it in the new one with little problems or will i need to reinstall windows i am currently running windows 7 professional i know on windows xp you generally could not do this but with windows 7s so called self healing capabilities i was interested to know if i could do this would save some time in the upgrade

    Read the article

  • SiliconMechanics - Good or Bad?

    - by AbLincon
    Has anyone purchased and managed servers from SiliconMechanics. I absolutely love the huge number of system configuration they offer and they unbelievable low cost. Are the servers designed well? Anyone have any experience using SiliconMechanics?

    Read the article

  • Get a file from a load balanced server in Windows Server

    - by Leandro
    I've a load balanced server on production environment for my application. The server is on Windows Server 2008 R2. I'm running a web application that creates and save a file into a folder on the web path. So I need to create a job that copy this file into another server. The main idea is that a file watcher checks for the file and then copy it instantly. But how can I know in what server it's the file? Please avoid "why you don't" answers to get a directly answer, if it's someone.

    Read the article

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >