Search Results

Search found 6100 results on 244 pages for 'power consumption'.

Page 9/244 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Power cycles on/off 3 times before booting properly from cold start, no other issues (New System)

    - by James
    Relevant Specs: Sapphire 5850, core i7 920, Seasonic x750 power supply, ECS X58B-A2 mobo. From a cold boot, meaning all power totally disconnected at the wall, the system will power on for less than a second and then power off completely. After two seconds of being powered off this will repeat and on the third "attempt" the computer will boot. To be very specific here is what happens: The power is turned on at the wall and on the psu, the orange stdby LED on the mobo is illuminated but the system is 'off'. I hit the power button on the case or on the mobo itself I hear the relay (?) in the psu closing The case light comes on and the mobo power light comes on. The fans start rotating. Immediately after this the I hear some relay click - the power lights extinguish, the fans stop, the stdby light remains on. Less than 2 seconds pass and the cycle repeats without any intervention from me. On the third attempt it boots normally and the machine runs perfectly. If I do a soft reboot or a full shutdown the computer starts normally the next time. It's only if I pull the power cord or flick the switch off on the PSU that I get the cycling again. Basically any time the stdby light on the mobo goes out. I have removed the graphics card and I get the same problem. I have removed the PSU, hotwired it to the ON position and verified voltages on all lines. The relay does not cycle when I do this. If I connect only the 24 pin ATX connector to the mobo and not the 8 pin ATX12V / CPU connector then I will not get the cycling, the fans run, the power light stays on, but obviously the system can't boot. Disconnecting all fans has no effect on the problem. My feeling it that it's something to do with the motherboard like a capacitor that's taking a long time to charge because it's leaking or something along those lines. But I can't imagine what could be 'wrong' with it and only manifest itself as a problem under these very specific circumstances. Any ideas? Thanks.

    Read the article

  • Update: TFS Power Tools March 2011

    - by Enrique Lima
    There is an update available for the TFS Power Tools and the TFS Build Power Tools. Among the updates to the Tools: Changes to the Team Foundation Server Backups Add-In for TFS Admin Console. Added functionality to the Windows Shell Extension. Changes to the tfpt command line tool that allows you to script build management commands. For a full detail of the changes, read Brian Harry’s post  http://blogs.msdn.com/b/bharry/archive/2011/03/03/mar-11-team-foundation-server-power-tools-are-available.aspx To download the Power Tools: Team Foundation Server Power Tools Team Foundation Server Build Extensions Power Tool

    Read the article

  • Previous power of 2

    - by Horacio
    There is a lot of information on how to find the next power of 2 of a given value (see refs) but I cannot find any to get the previous power of two. The only way I find so far is to keep a table with all power of two up to 2^64 and make a simple lookup. Acius' Snippets gamedev Bit Twiddling Hacks Stack Overflow

    Read the article

  • Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

    - by Pro Backup
    In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

    Read the article

  • USB Hub and Ubuntu

    - by aserwin
    I have a powered 7 port hub connected to my Ubuntu box and it does nothing. The devices (zip drive and web cam) work direct, but aren't recognized through the hub. This worked fine in Windows 7. I can't prove it is the OS because this is a new motherboard and processor. Any advice? EDIT : Output from lsusb -v Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:12.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0503 highspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:13.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:16.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:12.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:13.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:14.5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:16.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 31 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 15 bNumDeviceCaps 1 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 3 Lowest fully-functional device speed is SuperSpeed (5Gbps) bU1DevExitLat 3 micro seconds bU2DevExitLat 2047 micro seconds Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 04a9:1709 Canon, Inc. PIXMA MP150 Scanner Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04a9 Canon, Inc. idProduct 0x1709 PIXMA MP150 Scanner bcdDevice 1.08 iManufacturer 1 Canon iProduct 2 MP150 iSerial 3 20BC24 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 11 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 007 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc517 LX710 Cordless Desktop Laser bcdDevice 38.10 iManufacturer 1 Logitech iProduct 2 USB Receiver iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 98mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 59 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) This is with the powered hub plugged in.

    Read the article

  • SQLAuthority News – Download Whitepaper – Power View Infrastructure Configuration and Installation: Step-by-Step and Scripts

    - by pinaldave
    Power View, a feature of SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Server 2010 Enterprise Edition, is an interactive data exploration, visualization, and presentation experience. It provides intuitive ad-hoc reporting for business users such as data analysts, business decision makers, and information workers. Microsoft has recently released very interesting whitepaper which covers a sample scenario that validates the connectivity of the Power View reports to both PowerPivot workbooks and tabular models. This white paper talks about following important concepts about Power View: Understanding the hardware and software requirements and their download locations Installing and configuring the required infrastructure when Power View and its data models are on the same computer and on different computer Installing and configuring a computer used for client access to Power View reports, models, Sharepoint 2012 and Power View in a workgroup Configuring single sign-on access for double-hop scenarios with and without Kerberos You can download the whitepaper from here. This whitepaper talks about many interesting scenarios. It would be really interesting to know if you are using Power View in your production environment. If yes, would you please share your experience over here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Business Intelligence, Data Warehousing, PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQL White Papers, T SQL, Technology

    Read the article

  • XBRL - Moving from Production to Consumption

    - by jmorourke
    Here's an update on what’s new with XBRL and how it can actually benefit your organization versus adding extra time and costs to financial reporting.  On February 29th (leap day) of 2012 I attended the XBRL and Financial Analysis Technology Conference at Baruch College in NYC.  The event, which attracted over 300 XBRL gurus and fans was presented by XBRL US, The New York Society of Security Analysts’ Improved Corporate Reporting Committee, and Baruch College’s Robert Zicklin Center for Corporate Integrity.  The event featured keynotes from the U.S. Securities and Exchange Commission (SEC), and the CFA Institute as well as panels covering alternative research tools and data, corporate reporting to stakeholders and a demonstration of XBRL analysis tools.  The program culminated in a presentation of the finalists and the winner of the $20,000 XBRL Challenge.    Some of the key points made in the sessions included: The focus of XBRL tools is moving from production to consumption. As of February 2012, over 9000 companies are reporting in XBRL, with over 10 million facts filed to date XBRL taxonomy extensions have dropped from 27% to 11% making comparisons easier The SEC reports that XBRL makes it easier to analyze disclosures, focus on accounting issues XBRL is helping standards-setters like the FASB speed their analysis of impacts of proposed accounting rule changes Companies like Thomson Reuters report that XBRL is helping speed the delivery of data to clients The most interesting part of the program though, was the session highlighting the 5 finalists in the XBRL Challenge competition and the winning solution.  The XBRL Challenge was launched in 2011 as a means of spurring the development of more end-user tools to help with the consumption of XBRL-based financial information.       Over an 8-month process handled by 5 judges, there were 84 registrants, 15 completed submissions, 5 finalists and one winner of the challenge.  All of the solutions are open-sourced tools and most of them focus on consuming XBRL-based data.  The 5 finalists included: Advanced XBRL Processing from Oxide solutions – XBRL viewer for taxonomies, filings and company data with peer comparison capabilities. Arrelle – API for XBRL processes, supports SEC Validations, RSS Feeds to access filings etc. Calcbench – XBRL data analysis tool that can be embedded in other web applications.  This tool can combine XBRL filings with real-time market data. XBRL to XL – allows the importing of XBRL data into Microsoft Excel for analysis, comparisons.  Users start on the web and populate Excel with XBRL data. XBurble – allows users to search and view XBRL filings, export to Excel, merge for comparison, and includes a workflow interface. The winner of the $20,000 XBRL Challenge prize was CalcBench.  More information about the XBRL Challenge and the finalists can be found at www.XBRLUS.org/challenge XBRL for Sustainability Reporting – other recent news on the XBRL front was the announcement by the Global Reporting Initiative (GRI) of an XBRL taxonomy for Sustainability Reporting.  This taxonomy was co-developed by the GRI and Deloitte and is designed to make the consumption of data found in Sustainability Reports much easier.  Although there is no government mandate to file Sustainability Reports in XBRL format, organizations that do use the GRI guidelines for Sustainability Reporting are encouraged to tag and submit their data voluntarily to the GRI – who will populate a database with Sustainability Reporting data and make this available to the public.  For more information about this initiative, you can go to the GRI web site:  www.globalreporting.org. So how does all of this benefit corporate filers and investors?  Since its introduction, the consensus in the market is that XBRL has mainly benefited the regulators and investment analysts who need to consume and analyze large volumes of financial data.  But with the emergence of more end-user tools for consuming and analyzing XBRL-based data, and the ability to perform quick comparisons of one company versus its peers and competitors in an industry group, will soon accelerate the benefits to corporate finance staff, as well as individual investors.  This could apply to financial results tagged in XBRL, as well as non-financial information such as Sustainability Reporting – which over the long-term will likely be integrated with financial reporting.   And as multiple regulators and agencies in a country adopt the XBRL standard for corporate filings, more benefits will accrue as companies will be able to leverage one set of XBRL-based financial data for multiple regulatory filings.     For more information about the latest developments in XBRL, check out the XBRL US or XBRL International web sites:  www.xbrl.org, www.xbrlus.org. For more information about what Oracle is doing to support XBRL, here are some links: http://www.oracle.com/us/solutions/ent-performance-bi/disclosure-management-065892.html http://www.oracle.com/technetwork/database/features/xmldb/index-087631.html Feel free to contact me if you have any questions or need more information:  [email protected]

    Read the article

  • Dell Latitude D510 Runs From Battery But Not AC Adapter

    - by Jason George
    I have a Dell Latitude D510 that went belly up around two years ago. It will run from the battery, however, the wall adapter will neither power the machine nor charge the battery. Once the battery is dead, the machine is dead. Since it died I've searched repeatedly for solutions. I've tried a new AC adapter and even removed and replaced the DC jack thinking one of the solder joints might be bad. Both to no avail. After two years of searching I finally found the answer today. Since it's such a simple fix and I had such a hard time finding it I wanted to post the info for others (as it is apparently a common issue with the D510). -----SOLUTION----- It seems this is commonly caused by a cracked solder joint at pin 1 on an inductor filter pair (FL2) near the power jack. Pins 1 and 4 are ground and pins 2 and 3 are power. There should be 20V from 1 to 2 and 3. Anything less indicates a cracked joint that is increasing resistance and dropping the supply voltage. Repair simply requires reflowing all four pins with a little added solder for security. Detailed instructions can be found here. Dell Latitude D510 solder problem

    Read the article

  • Python fit polynomial, power law and exponential from data

    - by Nadir
    I have some data (x and y coordinates) coming from a study and I have to plot them and to find the best curve that fits data. My curves are: polynomial up to 6th degree; power law; and exponential. I am able to find the best fit for polynomial with while(i < 6): coefs, val = poly.polyfit(x, y, i, full=True) and I take the degree that minimizes val. When I have to fit a power law (the most probable in my study), I do not know how to do it correctly. This is what I have done. I have applied the log function to all x and y and I have tried to fit it with a linear polynomial. If the error (val) is lower than the others polynomial tried before, I have chosen the power law function. Am I correct? Now how can I reconstruct my power law starting from the line y = mx + q in order to draw it with the original points? I need also to display the function found. I have tried with: def power_law(x, m, q): return q * (x**m) using x_new = np.linspace(x[0], x[-1], num=len(x)*10) y1 = power_law(x_new, coefs[0], coefs[1]) popt, pcov = curve_fit(power_law, x_new, y1) but it seems not to work well.

    Read the article

  • How can I write a power function myself?

    - by Koning WWWWWWWWWWWWWWWWWWWWWWW
    Since I was 12, I was always wondering how I can make a function which calculates the power (e.g. 23) myself. In most languages these are included in the standard library, mostly as pow(double x, double y), but how can I write it myself? I was thinking about for loops, but it think my brain got in a loop (when I wanted to do a power with a non-integer exponent, like 54.5 or negatives 2-21) and I went crazy ;) So, how can I write a function which calculates the power of a real number? Thanks

    Read the article

  • ESXi hard drive power saving

    - by Jens
    I currently have a Windows Server running beneath my desk and was considering replacing it with a ESXi layer to run both a Windows and Unix virtual machine. The ESXi is going to give me some nice advantages that I can use but I am still stuck on this issue: The server is mainly used as a fileserver/local webserver, and I use Windows tasks to hibernate/wake the machine at night. Also there is an aggressive disk spin down timeout to reduce noise. With ESXi, this will not be possible to do any more. I could live with the server running 24/7, but I would really like to spin down the disks when not in use. Is there a way to do this on ESXi?

    Read the article

  • Home networking problem between power line communication and Ethernet

    - by pixeline
    My network runs through the electrical wiring of the house and is organised as such: Groundfloor: an ADSL+network switch, using DHCP (address : 172.19.3.1) (Mac) PCs connected via an electrical adapter (model: D-Link DHP-200) (1 per PC) First Floor: 1 switch (8 ports) connected via an electrical adapter (model: D-Link DHP-200) (address unknown) 2 Mac PCs connected (via RJ45 network wires) to that router using DHCP The Problem On the first floor, file tranfers between PCs are fast and perfect. But if I try to transfer files from or to a computer on the ground floor, the speed is slow and eventually the transfer dies out. The Question So I suspect the 1st floor switch is creating some kind of barrier (firewall?) preventing external PCs from accessing the PCs it is connected to? Am I right and if so, how could I disable that barrier?

    Read the article

  • Most basic, low power home surveillance system

    - by cbp
    I am thinking of setting up a simple but effective surveillance system for my house that is: Very low powered (preferably no PCs left running out of stand-by mode) Cheap. When motion (or sound) is detected, I would like it to: Send an email/phone alert to me Record and upload video to the web (in case they steal the camera) So I imagine a system where I leave a netbook PC in stand-by mode and have it woken up by a motion detector. This initiates software to send alerts and periodically upload recorded video to the web. The software part is easy for me, but I'm not really a gadget-man so I'd like some advice on using a motion sensor of some sort to wake up the PC. Does anyone have some good advice? I know there are a couple of questions dealing with this topic already (see here: http://superuser.com/questions/3054/looking-for-a-moderately-priced-home-surveillance-setup, and here: http://superuser.com/questions/2929/can-you-suggest-a-great-home-security-setup-anti-burglars-e-t-c) - I am seeking more specific information with this question.

    Read the article

  • XFS and loss of data when power goes down

    - by culebrón
    Each time electricity goes down, my desktop (without UPS) loses some temporary information. Opera can lose settings, history, cache, or mail accounts (Thanks heavens I was wise to use IMAP). Partially or all together. a whole file (complete and save) in Geany appeared empty (and I didn't commit it to Git) rhythmbox lost all podcasts subscription data I'm afraid there are other losses I just didn't see. What's the reason? A memory files cache, a mem-disk? Or non-atomic file writes in xfs? I have Ubuntu 9.10 and XFS on both / and /home partitions. Is ext4 safer in such circumstances? I've seen ext3 is faster. Is it as safe as *4? Given that the apartment I rent is connected to a common bus and 1 safety switch for several apartments, and the neighbors - alone or together - overload it at least once every week, the lights go down often enough for this to be an issue.

    Read the article

  • Computer Won't Boot After New Power Supply

    - by Haxelgem
    I recently bought a Rosewill 750-M PSU to replace an Antec Earthwatts 500. My computer worked fine before making the switch. After installing the Rosewill PSU, I attempted to boot. Fans spun up for a second, then turned off. After a second, they spun up again and stayed on. However, I had no video output. I put the old Antec PSU back in, and still had the same problem. I put another GPU in the computer, trying both PSUs, and still nothing. I switched out the monitor also, which didn't work. What should I do?

    Read the article

  • UPS for hard drive protection

    - by dimi
    I am in a place where electricity is not ideal (old house, no ground), sometimes it occasionally shuts down and supposedly there are some spikes. I consider using UPS with the goal to increase safety of my personal data. My first priority is the health of my internal and external USB hard drives which can be damaged due to possible power instability. I do not care that much about possible losses of not-saved work, instead I just want to let my system have a minimum time to turn off without any risk of physical damaging my hard drives. Would a cheap offline UPS suit my neads? Or do i need a better one with automatic voltage regulator (AVR)? How critical is AVR for the hard drives? The external ones require their own power supplies and will be plugged directly into UPS.

    Read the article

  • Automatically disable devices to save power and mitigate DMA attack in Windows 7

    - by Martheen Cahya Paulo
    Some OEM include energy saving apps that can switch off certain devices such as webcam or optical drive. Is there any brand-agnostic app out there that can do it? If the list of disabled device is customizable, it would be useful too for mitigating DMA attack (disabling Firewire, PCMCIA, SDIO, Thunderbolt, etc). Even better if it can recognize lock/logoff event, to mimic OSX behavior in mitigating the DMA attack.

    Read the article

  • Linux: disbale USB without disabling power

    - by Ergot
    TLDR I want toggle between the following usages of a usb-port via the terminal: use like a normal usb-port only supply energy to charge Story I recently got me something like a magna doodle that can save your drawings to pdf, which can be moved to your computer via usb afterwards. Now the thing is that you can't save anything while it's plugged in. Because it's the only way to charge it, it bugs me that I can't find a software solution and laziness I want to keep it plugged in and toggle the connection to the computer only when needed. I noticed that it's charging and usable when it is plugged in and the computer is shut down or suspened. So I guess that there's a way to do it. Tech info computer: ThinkPad X201 Linux Kernel: 3.14.5-1-ARCH "Magna doodle": Boogie Board Sync

    Read the article

  • Using a 20V power block on a 19V notebook

    - by user4444
    Is that dangerous : for the computer (without the battery) for the cells If possible, explain why. Edit : Here are some more assumptions : Without the battery included, there is no risk of overheating the cell, or over charging them. But there is still some dc to dc conversion taking place on the motherboard. I assume this dc to dc stage to be quite tolerant. What kind of trouble can I run into when using 20V instead of 19V ? Overheating ?

    Read the article

  • Using a 20V power block on a 19V notebook

    - by user4444
    Is that dangerous : for the computer (without the battery) for the cells If possible, explain why. Edit : Here are some more assumptions : Without the battery included, there is no risk of overheating the cell, or over charging them. But there is still some dc to dc conversion taking place on the motherboard. I assume this dc to dc stage to be quite tolerant. What kind of trouble can I run into when using 20V instead of 19V ? Overheating ?

    Read the article

  • How do I make ESXi 5.0 to shutdown virtual machines when the physical power button is pushed?

    - by Pawel Sawicki
    I have a home NAS/DLNA server built out of an HP Micro Server with the HP branded VMware ESXi 5.0.0 build-623860 (free license) installed. Being a home media center I'd like it to be "manageable" by all my household members. This requires that it needs to be powered on an off (including all the VMs inside) by anybody with the physical access to the server by simply pressing the power button on the chassis. The "startup" part is easy to obtain - all I had to do was to configure the startup/shutdown policy: Once the server powers up, all VMs start as well and that's exactly what I need. Well.. it did work up until 5.0.0U1, but that's a different story: http://blogs.vmware.com/vsphere/2012/03/free-esxi-hypervisor-auto-start-breaks-with-50-update-1.html Unfortunately, pressing the power button doesn't gracefully shutdown the guest machines - they are terminated instead. If I run the "shut down" command from the vSphere Client interface guests are powered off. I'd like to get the same end result when the physical power button is switched. I've poked around a bit on the ESXi server. There's a "/sbin/shutdown.sh" script that seemed to do exactly what I need... but after trying it does exactly what the power off button. The "/etc/inittab" contains an entry for the "shutdown" level but I suppose it's not hooked to the power button. I can't find any acpi related configuration, neither do I know what exactly is executed when the power button is pressed. Does anybody have a clue how can I make the VMs shutdown automatically when the physical power switch is pressed to turn of the computer?

    Read the article

  • Why do manufacturers not show all hardware power usage?

    - by Drew
    I find it slightly more difficult to build a computer when I do not know how much power is needed for a component. When selecting a power supply for a computer, it is difficult to know how large of one to get. You don't want to go too large for cost reasons and circuit reasons, but you don't want to go too low and not be able to properly use every component. For instance, a graphics card might say "Minimum of a 500 Watt power supply. (Minimum recommended power supply with +12 Volt current rating of 30 Amps.)" But it really needs 360W (12V * 30A). So why don't they just say "Uses 360W max and xxxW peak"? Processors, I have noticed are good at reporting their power usage, but aside from processors and sometimes graphics cards, power usage is easily found. What is the power consumed by the Blu-ray / DVD drives? By the HDDs/SSDs? By the Mobo? etc. Why are these questions not easily answered when building a machine?

    Read the article

  • Windows - CPU power management APIs

    - by iulianchira
    What APIs are provided by Windows for CPU power management (I'm interested in CPU frequency scaling, setting min and max CPU frequency - similar to what you can do in Control Panel in power plans, but in a programmatic way). I'm also interested in .Net APIs.

    Read the article

  • Reason behind system power usage?

    - by kumar
    Hi, when the number of applications running in a pc increases, the power consumed by the PC is also increasing. Is this correct? I think the reason behind this is CPU. Please let me know what role the CPU plays for more power usage. Thanks, Kavi

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >