Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 90/1660 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Accessing Squid Proxy over internet

  - by prateekdayal

  Hi, I recently finished installing Squid on a VPS I have in the US and its working fine locally (I verified by setting http_proxy variable and using lynx). I want to access this proxy over the internet (as an anonymizer) so that I can see how some ads show up for US traffic on my website. I have setup authentication so abuse is not a problem. However, I am not able to access the proxy over the internet. I have set the following rule in squid.conf http_access allow all Is this not possible to do what I want or I am missing something? The port 3128 is open in the firewall so that is not an issue. Squid is running on 0.0.0.0 Thanks Prateek

  Read the article

• Disable raid member check upon mount to mount damaged nvidia raid1 member

  - by Halfgaar

  Hi, A friend of mine destroyed his Nvidia RAID1 array somehow and in trying to fix it, he ended up with a non-working array. Because of the RAID metadata, the actual disk data was stored at an offset from the beginning. I was able to identify this offset with dd and a hexeditor and then I used losetup to create a loop device with the proper offset, so that I could mount the partition. It was then that I ran into problems, namely that mount says: "mount: unknown filesystem type 'nvidia_raid_member'". I also had this when trying to mount a Linux MD component the other day, and because I can remember that doing that in the past worked, I surmised that it may be some kind of protection. I therefore booted an old Sysrescue CD and tried it there, which worked (because of the older version of mount/libc/kernel/whatever). I still need to try to get more data, and because I don't want to keep using that SysrecueCD, I'd like to be able to mount the disk on my normal system. So, my question is: can the check for a disk being a raid member be disabled? I guess I could also zero out blocks that look like the raid block, but I'd rather not... I made an image of the disk with par2 data, so it's revertable, but still...

  Read the article

• Sign an OpenSSL .CSR with Microsoft Certificate Authority

  - by kce

  I'm in the process of building a Debian FreeRadius server that does 802.1x authentication for domain members. I would like to sign my radius server's SSL certificate (used for EAP-TLS) and leverage the domain's existing PKI. The radius server is joined to domain via Samba and has a machine account as displayed in Active Directory Users and Computers. The domain controller I'm trying to sign my radius server's key against does not have IIS installed so I can't use the preferred Certsrv webpage to generate the certificate. The MMC tools won't work as it can't access the certificate stores on the radius server because they don't exist. This leaves the certreq.exe utility. I'm generating my .CSR with the following command: openssl req -nodes -newkey rsa:1024 -keyout server.key -out server.csr The resulting .CSR: ******@mis-ke-lnx:~/G$ openssl req -text -noout -in mis-radius-lnx.csr Certificate Request: Data: Version: 0 (0x0) Subject: C=US, ST=Alaska, L=CITY, O=ORG, OU=DEPT, CN=ME/emailAddress=MYEMAIL Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:a8:b3:0d:4b:3f:fa:a4:5f:78:0c:24:24:23:ac: cf:c5:28:af:af:a2:9b:07:23:67:4c:77:b5:e8:8a: 08:2e:c5:a3:37:e1:05:53:41:f3:4b:e1:56:44:d2: 27:c6:90:df:ae:3b:79:e4:20:c2:e4:d1:3e:22:df: 03:60:08:b7:f0:6b:39:4d:b4:5e:15:f7:1d:90:e8: 46:10:28:38:6a:62:c2:39:80:5a:92:73:37:85:37: d3:3e:57:55:b8:93:a3:43:ac:2b:de:0f:f8:ab:44: 13:8e:48:29:d7:8d:ce:e2:1d:2a:b7:2b:9d:88:ea: 79:64:3f:9a:7b:90:13:87:63 Exponent: 65537 (0x10001) Attributes: a0:00 Signature Algorithm: sha1WithRSAEncryption 35:57:3a:ec:82:fc:0a:8b:90:9a:11:6b:56:e7:a8:e4:91:df: 73:1a:59:d6:5f:90:07:83:46:aa:55:54:1c:f9:28:3e:a6:42: 48:0d:6b:da:58:e4:f5:7f:81:ee:e2:66:71:78:85:bd:7f:6d: 02:b6:9c:32:ad:fa:1f:53:0a:b4:38:25:65:c2:e4:37:00:16: 53:d2:da:f2:ad:cb:92:2b:58:15:f4:ea:02:1c:a3:1c:1f:59: 4b:0f:6c:53:70:ef:47:60:b6:87:c7:2c:39:85:d8:54:84:a1: b4:67:f0:d3:32:f4:8e:b3:76:04:a8:65:48:58:ad:3a:d2:c9: 3d:63 I'm trying to submit my certificate using the following certreq.exe command: certreq -submit -attrib "CertificateTemplate:Machine" server.csr I receive the following error upon doing so: RequestId: 601 Certificate not issued (Denied) Denied by Policy Module The DNS name is unavailable and cannot be added to the Subject Alternate name. 0x8009480f (-2146875377) Certificate Request Processor: The DNS name is unavailable and cannot be added to the Subject Alternate name. 0x8009480f (-2146875377) Denied by Policy Module My certificate authority has the following certificate templates available. If I try to submit by certreq.exe using "CertificiateTemplate:Computer" instead of "CertificateTemplate:Machine" I get an error reporting that "the requested certificate template is not supported by this CA." My google-foo has failed me so far on trying to understand this error... I feel like this should be a relatively simple task as X.509 is X.509 and OpenSSL generates the .CSRs in the required PKCS10 format. I can't be only one out there trying to sign a OpenSSL generated key on a Linux box with a Windows Certificate Authority, so how do I do this (perferably using the off-line certreq.exe tool)?

  Read the article

• Shorten Emacs timeout of ~/.emacs read

  - by user35042

  My ~/.emacs start-up file is stored in my AFS home directory. Often when I login to a linux machine I will forget to renew my AFS credentials before attempting to edit a local (non-AFS) file with Emacs. When this happens Emacs will attempt to load ~./emacs but cannot because it is in AFS space where I do not have access. Eventually (after a minute or so) Emacs will give up trying to load ~./emacs and continue. But waiting for Emacs to timeout is annoying (typing Ctrl-Z does not seem to interrupt this timeout). I want to shorten the amount of time that Emacs waits before giving up. I have tried the suggestion at this site which says to put the following code in the site-start.el file: (with-timeout (4) (load remote-.emacs)) However, when I do that I get the error Error in init file: Symbol's value as variable is void: remote-\.emacs whenever starting Emacs. How can I shorten this timeout?

  Read the article

• Accessing Squid Proxy over internet

  - by user37074

  Hi, I recently finished installing Squid on a VPS I have in the US and its working fine locally (I verified by setting http_proxy variable and using lynx). I want to access this proxy over the internet (as an anonymizer) so that I can see how some ads show up for US traffic on my website. I have setup authentication so abuse is not a problem. However, I am not able to access the proxy over the internet. I have set the following rule in squid.conf http_access allow all Is this not possible to do what I want or I am missing something? The port 3128 is open in the firewall so that is not an issue. Squid is running on 0.0.0.0 Thanks

  Read the article

• Help to set up RAID on a DELL Poweredge 400SC

  - by Jim

  I have a FastTrak S150 TX2 raid controller that I have downloaded the driver for. I am installing WinXP fresh but don't have a floppy disk. Is there another way to load these drivers on boot? Anyone? Anyone at all...

  Read the article

• xen 4.1 host priodically dropping network packets of domU

  - by Dyutiman Chakraborty

  I have xen 4.1 Host running on a ubuntu 12.04 LTS Server with ip 153.x.x.54. I have setup 2 VMs on it, namely, "dev.mydomain.com" and "web.mydomain.com" with ips 195.X.X.2 and 195.x.x.3 respectively. For network the VMs connect through xendbr0 (xen-bridge), and can accces the network properly. I can also login to the VMs with ssh with no issue. However when I ping any of the VMs, there is a high amount of periodic packet drop. If I the ping the xen host (dom0) there is no packet drop. Following is a output of "tcpdump | grep ICMP" on dOM0 while I was pinging one of the domU tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 05:19:55.682493 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 30, length 64 05:19:56.691144 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 31, length 64 05:19:57.698776 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 32, length 64 05:19:58.706784 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 33, length 64 05:19:59.714751 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 34, length 64 05:20:00.723144 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 35, length 64 05:20:01.730349 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 36, length 64 05:20:02.739017 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 37, length 64 05:20:03.746806 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 38, length 64 05:20:06.770326 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 41, length 64 05:20:07.778801 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 42, length 64 05:20:08.786481 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 43, length 64 05:20:09.794720 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 44, length 64 05:20:10.802395 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 45, length 64 05:20:11.810770 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 46, length 64 05:20:12.818511 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 47, length 64 05:20:13.826817 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 48, length 64 05:20:14.835125 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 49, length 64 05:20:15.842138 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 50, length 64 05:20:18.274072 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 1, length 64 05:20:19.282347 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 2, length 64 05:20:20.290746 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 3, length 64 05:20:21.297910 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 4, length 64 05:20:22.305656 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 5, length 64 05:20:23.314369 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 6, length 64 05:20:24.322055 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 7, length 64 05:20:25.329782 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 8, length 64 05:20:26.338473 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 9, length 64 05:20:27.346411 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 10, length 64 05:20:28.354175 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 11, length 64 05:20:29.361640 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 12, length 64 05:20:30.370026 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 13, length 64 05:20:31.377696 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 14, length 64 05:20:32.386151 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 15, length 64 05:20:33.394118 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 16, length 64 05:20:34.402058 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 17, length 64 05:20:35.409002 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 18, length 64 05:20:36.417692 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 19, length 64 05:20:36.496916 IP6 fe80::3285:a9ff:feec:fc69 > ip6-allnodes: HBH ICMP6, multicast listener querymax resp delay: 1000 addr: ::, length 24 05:20:36.499112 IP6 fe80::21c:c0ff:fe6c:c091 > ff02::1:ff6c:c091: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff6c:c091, length 24 05:20:36.507041 IP6 fe80::227:eff:fe11:fa3f > ff02::1:ff00:2: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:2, length 24 05:20:36.523919 IP6 fe80::21c:c0ff:fe77:6257 > ff02::1:ff77:6257: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff77:6257, length 24 05:20:36.544785 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff12:ea9a: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff12:ea9a, length 24 05:20:36.581740 IP6 fe80::5604:a6ff:fef1:6da7 > ff02::1:fff1:6da7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:fff1:6da7, length 24 05:20:36.600103 IP6 fe80::8a8:8aa0:5e18:917a > ff02::1:ff18:917a: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff18:917a, length 24 05:20:36.601989 IP6 fe80::227:eff:fe11:fa3e > ff02::1:ff11:fa3e: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff11:fa3e, length 24 05:20:36.611090 IP6 fe80::dcad:56ff:fe57:3bbe > ff02::1:ff57:3bbe: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff57:3bbe, length 24 05:20:36.660521 IP6 fe80::54:ff:fe02:1d31 > ff02::1:ff00:6: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:6, length 24 05:20:36.698871 IP6 fe80::21e:8cff:feb4:9f89 > ff02::1:ffb4:9f89: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ffb4:9f89, length 24 05:20:36.776548 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff01:7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff01:7, length 24 05:20:36.781910 IP6 fe80::54:ff:fe8f:6dd > ff02::1:ff00:3: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:3, length 24 05:20:36.865475 IP6 fe80::21c:c0ff:fe4a:ae9f > ff02::1:ff4a:ae9f: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff4a:ae9f, length 24 05:20:36.908333 IP6 fe80::dcad:45ff:fe90:84db > ff02::1:ff90:84db: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff90:84db, length 24 05:20:36.919653 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff00:7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:7, length 24 05:20:36.924276 IP6 fe80::59a2:2a4a:2082:6dee > ff02::1:ff82:6dee: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff82:6dee, length 24 05:20:37.001905 IP6 fe80::54:ff:fe8f:6dd > ff02::1:ff8f:6dd: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff8f:6dd, length 24 05:20:37.042403 IP6 fe80::54:ff:fe95:54f2 > ff02::1:ff95:54f2: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff95:54f2, length 24 05:20:37.090992 IP6 fe80::21c:c0ff:fe77:62ac > ff02::1:ff77:62ac: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff77:62ac, length 24 05:20:37.098118 IP6 fe80::d63d:7eff:fe01:b67f > ff02::1:ff01:b67f: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff01:b67f, length 24 05:20:37.118784 IP6 fe80::54:ff:fe12:ea9a > ff02::202: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::202, length 24 05:20:37.168548 IP6 fe80::54:ff:fe02:1d31 > ff02::1:ff02:1d31: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff02:1d31, length 24 05:20:41.743286 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 1, length 64 05:20:41.743542 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 1, length 64 05:20:42.743859 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 2, length 64 05:20:42.743952 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 2, length 64 05:20:43.745689 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 3, length 64 05:20:43.745777 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 3, length 64 05:20:44.746706 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 4, length 64 05:20:44.746796 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 4, length 64 05:20:45.747986 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 5, length 64 05:20:45.748082 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 5, length 64 05:20:46.749834 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 6, length 64 05:20:46.749920 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 6, length 64 05:20:47.750838 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 7, length 64 05:20:47.751182 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 7, length 64 05:20:48.751909 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 8, length 64 05:20:48.751991 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 8, length 64 05:20:49.752542 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 9, length 64 05:20:49.752620 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 9, length 64 05:20:50.754246 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 10, length 64 05:20:51.753856 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 11, length 64 05:20:52.752868 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 12, length 64 05:20:53.754174 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 13, length 64 05:20:54.753972 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 14, length 64 05:20:55.753814 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 15, length 64 05:20:56.753391 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 16, length 64 05:20:57.753683 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 17, length 64 05:20:58.753487 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 18, length 64 05:20:59.754013 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 19, length 64 05:21:00.753169 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 20, length 64 05:21:01.753757 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 21, length 64 05:21:02.753307 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 22, length 64 05:21:03.753021 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 23, length 64 05:21:04.753628 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 24, length 64 ^C479 packets captured 718 packets received by filter 238 packets dropped by kernel 3 packets dropped by interface You see the ping request is not responed to initially, then for a moment it is replied back and then again no reply. I have tried everything (to the best of my knowledge) to fix this, but can't find any answer Any help will be greatly appreciated Thanks.

  Read the article

• Problem Activating “Windows Communication Foundation Non-HTTP Activation” feature in Windows 7

  - by Escobar5

  I'm having the following problem. I'm installing SharePoint 2010 Beta so I need to activate the windows feature "Windows Communication Foundation Non-HTTP Activation". The problem is I cannot activate it, i get the message: "An error has occurred. Not all features were successfully changed" When i look at the log (C:\Windows\Logs\CBS\CBS.log) I found this error: Process output: [l:186 [186]"SMConfigInstaller[Error]: Failed in calling 'StartService' for service 'NetTcpActivator'. Error code: 0x8007042c Anyone can give me a clue of what is happening here?

  Read the article

• Windows 8 and SMB2 Issues

  - by Rhys Paterson

  We're playing with the consumer preview of Windows 8 and having issues accessing some network shares in our environment. Basically, when I attempt to access a share directly (\[SERVER].[DOMAIN].[NETWORK]\Share$) I get 'An extended error has occured'. The shares reside on an EMC Celerra system. Sorry, I don't really have much more information about it (this is just a little side project). Accessing shares that reside on Windows machines are fine. The Firewall is completley disabled and I am running under full domain administrative credentials. A quick wireshark shows the following group of packets between myself and the server: SMB2 164 NegotiateProtocol Request SMB2 274 NegotiateProtocol Response SMB2 981 SessionSetup Request SMB2 281 SessionSetup Response SMB2 200 TreeConnect Request Tree: \\[SERVER].[DOMAIN].[NETWORK]\[SHARE]$ SMB2 138 TreeConnect Response SMB2 202 Ioctl Request NETWORK_FILE_SYSTEM Function:0x0080 SMB2 131 Ioctl Response, Error: STATUS_INVALID_DEVICE_REQUEST SMB2 126 SessionLogoff Request SMB2 126 SessionLogoff Respons This repeats five times and then (I assume) Windows throws me the above error. A quick Google shows me: 0xC0000010 STATUS_INVALID_DEVICE_REQUEST The specified request is not a valid operation for the target device. Which shows me that NETWORK_FILE_SYSTEM Function:0x0080 request is invalid.. Does anyone know what would cause this? Thanks in advance. Rhys. Edit: FYI - as a workaround, you can disable SMB 2.2 as noted in the EMC thread: sc config lanmanworkstation depend= bowser/mrxsmb10/nsi sc config mrxsmb20 start= disabled This will allow the machine to access the shares. The below answer still stands though :)

  Read the article

• Fatal error: Incompatible file format: The encoded file has format major ID 1, whereas the Loader expects 4 in ... on line 0

  - by Eugene

  I am using Ubuntu 10.04 and for some time I had to keep a downgraded PHP 5.2 package because I need to run Zend encrypted scripts. Recently I noticed that Zend released beta version of their loader (http://forums.zend.com/viewtopic.php?f=57&t=1365&start=80#p22073) so I updated to the native PHP 5.3 package, downloaded the .so file, added this to php.ini ;zend_extension=/etc/php5/ZendOptimizer.so zend_extension=/etc/php5/ZendGuardLoader.so zend_loader.enable=1 zend_loader.disable_licensing=0 zend_loader.obfuscation_level_support=3 and restarted the server. Now I am getting this error: Fatal error: Incompatible file format: The encoded file has format major ID 1, whereas the Loader expects 4 in ... on line 0 Do you by chance know an easy fix for this? Or should I downgrade back and wait till when they release something more stable?

  Read the article

• Eject disk on Mac Pro running VMWare ESXi

  - by DougN

  I'm almost embarrassed to ask this, but I'm stuck. I installed VMWare ESXi on a Mac Pro. It's working great! The problem is that you press F12 to eject the disk, and F12 is what you use to shutdown ESX. I can power down, open the case, pull out the CD drive and use a paper clip to force the drawer open, but that's kind of a pain. Any other way to do this?

  Read the article

• Can I configure Wndows NDES server to use Triple DES (3DES) algorithm for PKCS#7 answer encryption?

  - by O.Shevchenko

  I am running SCEP client to enroll certificates on NDES server. If OpenSSL is not in FIPS mode - everything works fine. In FIPS mode i get the following error: pkcs7_unwrap():pkcs7.c:708] error decrypting inner PKCS#7 139968442623728:error:060A60A3:digital envelope routines:FIPS_CIPHERINIT:disabled for fips:fips_enc.c:142: 139968442623728:error:21072077:PKCS7 routines:PKCS7_decrypt:decrypt error:pk7_smime.c:557: That's because NDES server uses DES algorithm to encrypt returned PKCS#7 packet. I used the following debug code: /* Copy enveloped data from PKCS#7 */ bytes = BIO_read(pkcs7bio, buffer, sizeof(buffer)); BIO_write(outbio, buffer, bytes); p7enc = d2i_PKCS7_bio(outbio, NULL); /* Get encryption PKCS#7 algorithm */ enc_alg=p7enc->d.enveloped->enc_data->algorithm; evp_cipher=EVP_get_cipherbyobj(enc_alg->algorithm); printf("evp_cipher->nid = %d\n", evp_cipher->nid); The last string always prints: evp_cipher-nid = 31 defined in openssl-1.0.1c/include/openssl/objects.h #define SN_des_cbc "DES-CBC" #define LN_des_cbc "des-cbc" #define NID_des_cbc 31 I use 3DES algorithm for PKCS7 requests encryption in my code (pscep.enc_alg = (EVP_CIPHER *)EVP_des_ede3_cbc()) and NDES server accepts these requests, but it always returns answer encrypted with DES. Can I configure Wndows NDES server to use Triple DES (3DES) algorithm for PKCS#7 answer encryption?

  Read the article

• Remote RIB iLO on Proliant via RIBCL

  - by Wudang

  I'm trying to automate a process for our Ops. The process requires that some windows servers running on blades are shut down, left down for a few hours, the restarted when some other processes complete. This is done by an op logging on to each blade's iLO web interface to stop and start. I've been trying to automate this with HP's cpqlocfg program with partial success. I can issue the GET_POWER, GET_USER_INFO, etc commands but SET_HOST_POWER fails in a specific way. Using the cpqlocfg GET_EVENTLOG command I can see the events XML login and the power comand being issued from the iLO interface but then nothing happens. Some hints from googling suggest ACPI isn't configured properly but I can't find any hits on how to verify this. Am I even using the right command? There's also a few other options like PRESS_PWR_BUTTON etc. Problem is I have nowhere to test this, all I can do at the moment is give a script to ops and ask them to try it as 4am on a Sunday when they try the proc. The shutdown is trivial as I can use the windows "shutdown" command, it's the power on that I need help on. Anyone done this? I'd tag this "rib ribcl ilo" but lack the rep points, sorry.

  Read the article

• Active Directory - Lightweight Directory Services and Domain Password Policy

  - by Craig Beuker

  Greetings all, We have an active directory domain which enforces a strict password policy. Hooray! Now, for the project we are working on, we are going to be storing users of our website Microsoft's AD-LDS service as well as using that for authentication of our web users. By default, it is my understanding that AD-LDS inherits its password policy from the domain of the machine it's installed on. Is there any way to break that link such that we can define a lighter password policy (or none if we so choose) for users in AD-LDS without affecting our domain? Note: AD-LDS is going to be hosted on a machine which is part of the domain. Thanks in advance.

  Read the article

• plesk update fails

  - by Caballero

  I have a dedicated server running CentOS 5.3. I'm trying to update Plesk 9.5.2 to version 10.0.0 but update fails. I do it with yum: yum update psa* --skip-broken -t but it fails and I get the errors at the end: Skip-broken could not solve problems Error: plesk-mail-pc-driver conflicts with psa-qmail Error: plesk-mail-pc-driver conflicts with psa-qmail-rblsmtpd Error: plesk-mail-qc-driver conflicts with plesk-mail-pc-driver Error: plesk-core conflicts with plesk-billing Error: Missing Dependency: sw-engine = 2.0 is needed by package plesk-billing-6.0.4-20090625.11.noarch (installed) Error: Missing Dependency: pp-sitebuilder >= 10.3.0 is needed by package psa-10.3.0-cos5.build1012110629.18.x86_64 (plesk) Error: plesk-mail-pc-driver conflicts with plesk-mail-qc-driver Is there a way that I could solve this?

  Read the article

• Change DPI of one user using W2K3 Remote Desktop / Terminal Server

  - by GvS

  In short: How do I increase the DPI of some (not all) of our customers connected to our RDP server? We are running a W2K3 Terminal Server that our clients connect to to run our application. One of our clients complains that all fonts / icons etc are too small. This user has a high DPI monitor. The DPI of the client OS (XP in this case) is not transferred to the server. To make things worse (or more interesting) the Display properties dialog disables the Advanced button that you can use to change the DPI on normal clients.

  Read the article

• ORA-12705: Cannot access NLS data files or invalid environment specified

  - by Mohit Nanda

  I am getting this error while trying to create a connection pool, on my Oracle database, Oracle 10gR2. java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified I am able to connect to the database over sqlplus & iSQLPlus client, but when I try to connect using this Java program, I get this error just when the connection pool is to be initialised and it does not initialise the connection pool. Can someone please help me resolving it? DB Version: Oracle version 10.2.0.1 OS: RHEL 4.0 Here is a barebone, java code which is throwing this error, while connecting to my database. import java.sql.*; public class connect{ public static void main(String[] args) { Connection con = null; CallableStatement cstmt = null; String url = "jdbc:oracle:thin:@hostname:1521:oracle"; String userName = "username"; String password = "password"; try { System.out.println("Registering Driver ..."); DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver()); System.out.println("Creating Connection ..."); con = DriverManager.getConnection(url, userName, password); System.out.println("Success!"); } catch(Exception ex) { ex.printStackTrace(System.err); } finally { if(cstmt != null) try{cstmt.close();}catch(Exception _ex){} if(con != null) try{con.close();}catch(Exception _ex){} } } }

  Read the article

• supermicro server ipmi problem - problem with keyboard layout

  - by maxs

  hi, we hava a supermicro server (x8dtl-if-O with suse 11): if i connect from my workstation (xppro-german)with the remote console i can not type any öä<... (on the server local - we have no problems - only remote). the keyboard layout of the workstation is german - if i switch the keyboard layout to english i can type öäü.... - but i don't can type <| ?? thx

  Read the article

• RT database scaling

  - by rplevy

  Recently I heard someone suggest that RT request tracker may have scalability issues due to its non-normalized database (someone at a Perl meeting I went to referred to it in a positive light as hyper-normalized, but I think he may have misunderstood what normalization is all about). On the other hand I know that large scale enterprises such as Perl's CPAN use RT. Do es this level of scale require special measures to be taken to handle what happens when the db grows too large? What have your experiences been?

  Read the article

• Ubuntu doesn't detect drives conected to LSI "Host Bus Adapter"

  - by dvrecmfo

  I purchased LSI SAS 9300-4i Host Bus Adapter, from card bios I can see that it detected all hard drives connected to it, but from ubuntu I can't see them. What I've tried: Installed the driver provided here http://www.lsi.com/products/host-bus-adapters/pages/lsi-sas-9300-4i.aspx#tab/tab3 (I tried both LINUX_RH_SL_OEL_CTX_MPT_GEN3_C0_Phase2.0-3.00.00.00-1 and Linux_Driver_RHEL5-6_SLES10-11_P1) lspci | grep -i lsi 07:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3004 PCI-Express Fusion-MPT SAS-3 (rev 02)

  Read the article

• How to use Bonjour?

  - by Roman

  First, what exactly Bonjour does (pleas read my guesses written bellow)? Here I found out that Bonjour enables automatic discovery of computers, devices, and services on IP networks. But I thought that it not only "discovers devices on IP network" it also creates an IP network by assigning IP addresses to devices where Bonjour is running. Am I right? And I still miss the essence. Does it work in the following way? First I connect devices (for example laptops) physically so that they potentially can communicate with each other. Then, let say, on some laptops I have Bonjour running and then, as a consequence, these laptops assign IP addresses to them self in automatic way. So, laptops (where Bonjour is running) build an IP network. Does it work in this way? Or may be a computer running Bonjour is not considered as a service and it does not broadcast itself just because Bonjour is running on this computer. I mean that the applications running on the computers need to use Bonjour to broadcast themself. So, it is applications that broadcast themself (not computers) and it is not done automatically (application needs to broadcast themself explicitly). Is it right? How exactly my application can broadcast itself? Can I use command line to register an service (so that all applications using Bonjour knows that a new service appeared)? Further, I would like to have an application which use the IP network created by Bonjour. For that my application needs to know which devices/services are present in the network. In more details, my application needs to have a list of services. Each service in the list should have a name, the IP address where it is running and the port which is used by the application. Can Bonjour provide this information in some way? If it is the case, how exactly it works. How my program can get this information from Bonjour? Can my program read some file created by Bonjour and containing the above mentioned information? Can I use some commands in command line to retrieve this information? I have a special interest in accessing the information about services from files, environment variables or commands in command line. These options seems to me to be the simplest! Since in these case I do not need to use any additional libraries to communicate with Bonjour from a particular programming language. P.S. Pleas ask questions if something is not clear in my question. I will try to formulate my question in a more clear way. P.P.S. I use Windows 7. ADDED: I plan to write my applications in PHP. Every computer should run a Apache web server. And I want to use Bonjour to help computer discover each other (computers are working in a local network).

  Read the article

• Windows 7 allow pinning exe on network share to taskbar

  - by petebob796

  I am just configuring my new Windows 7 work machine and have discovered that I can't pin an exe on a network drive to the taskbar. Are there any work arounds to this e.g. Registry Edits. I can understand the reasoning it's not allowed by default for newbies as the network location may later not exist but I am certain it always will.

  Read the article

• Windows Server 2008: specifying the default IP address when NIC has multiple addresses

  - by Cédric Boivin

  I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default IP address changes with the last IP entered in the advanced IP configuration on the NIC. This has the effect (since I use NAT) that the outgoing public IP changes too. Even though this problem is currently on Windows Server 2008 How can you set the default IP address on a NIC when it has multiple IP addresses bound? There is more explication on my probleme. Here is the ipconfig DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.99.49(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.52(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.53(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.54(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.55(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.56(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.58(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.59(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.60(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.61(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.62(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.64(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.65(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.66(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.67(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.68(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.70(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.71(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.100(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.108(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.109(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.112(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.63(Duplicate) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.99.1 If i do a pathping there is the answer, the first up is the 99.49, also if my default ip is 99.100 Tracing route to www.l.google.com [72.14.204.99] over a maximum of 30 hops: 0 Machine [192.168.99.49] There is the routing table on the machine Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.99.1 192.168.99.49 261 10.10.10.0 255.255.255.0 On-link 10.10.10.10 261 10.10.10.10 255.255.255.255 On-link 10.10.10.10 261 10.10.10.255 255.255.255.255 On-link 10.10.10.10 261 192.168.99.0 255.255.255.0 On-link 192.168.99.49 261 192.168.99.49 255.255.255.255 On-link 192.168.99.49 261 192.168.99.51 255.255.255.255 On-link 192.168.99.49 261 192.168.99.52 255.255.255.255 On-link 192.168.99.49 261 192.168.99.53 255.255.255.255 On-link 192.168.99.49 261 192.168.99.54 255.255.255.255 On-link 192.168.99.49 261 192.168.99.55 255.255.255.255 On-link 192.168.99.49 261 192.168.99.56 255.255.255.255 On-link 192.168.99.49 261 192.168.99.57 255.255.255.255 On-link 192.168.99.49 261 192.168.99.58 255.255.255.255 On-link 192.168.99.49 261 192.168.99.59 255.255.255.255 On-link 192.168.99.49 261 192.168.99.60 255.255.255.255 On-link 192.168.99.49 261 192.168.99.61 255.255.255.255 On-link 192.168.99.49 261 192.168.99.62 255.255.255.255 On-link 192.168.99.49 261 192.168.99.64 255.255.255.255 On-link 192.168.99.49 261 192.168.99.65 255.255.255.255 On-link 192.168.99.49 261 192.168.99.66 255.255.255.255 On-link 192.168.99.49 261 192.168.99.67 255.255.255.255 On-link 192.168.99.49 261 192.168.99.68 255.255.255.255 On-link 192.168.99.49 261 192.168.99.70 255.255.255.255 On-link 192.168.99.49 261 192.168.99.71 255.255.255.255 On-link 192.168.99.49 261 192.168.99.100 255.255.255.255 On-link 192.168.99.49 261 192.168.99.108 255.255.255.255 On-link 192.168.99.49 261 192.168.99.109 255.255.255.255 On-link 192.168.99.49 261 192.168.99.112 255.255.255.255 On-link 192.168.99.49 261 192.168.99.255 255.255.255.255 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 10.10.10.10 261 255.255.255.255 255.255.255.255 On-link 192.168.99.49 261 255.255.255.255 255.255.255.255 On-link 10.10.10.10 261 How i can be sure the ip use in the image ( suppose to be the default ip address ) will be use by my server as the default address ?

  Read the article

• Over 200 active requests like "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)"

  - by Stefan Lasiewski

  Some details: Webserver: Apache/2.2.13 (FreeBSD) mod_ssl/2.2.13 OpenSSL/0.9.8e OS: FreeBSD 7.2-RELEASE This is a FreeBSD Jail. I believe I use the Apache 'prefork' MPM (I run the default for FreeBSD). I use the default values for MaxClients (256) I have enabled mod_status, with "ExtendedStatus On". When I view /server-status , I see a handful of regular requests. I also see over 230 requests from the 'localhost', like these: 37-0 - 0/0/1 . 0.00 1510 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 38-0 - 0/0/1 . 0.00 1509 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 39-0 - 0/0/3 . 0.00 1482 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 40-0 - 0/0/6 . 0.00 1445 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 I also see about 2417 requests yesterday from the localhost, like these: Apr 14 11:16:40 192.168.16.127 httpd[431]: www.example.gov 127.0.0.2 - - [15/Apr/2010:11:16:40 -0700] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The page at http://wiki.apache.org/httpd/InternalDummyConnection says "These requests are perfectly normal and you do not, in general, need to worry about them", but I'm not so sure. Why are there over 230 of these? Are these active connections? If I have "MaxClients 256", and over 230 of these connections, it seems that my webserver is dangerously close to running out of available connections. It also seems like Apache should only need a handful of these "internal dummy connections" We actually had two unexplained outages last night, and I am wondering if these "internal dummy connection" caused us to run out of available connections.

  Read the article

• VMware ESXi - varying CPU time (CPU reservation)

  - by Tomo

  Hello! I'm running FreeBSD 7.2 under VMware ESXi 3.5. Host has 2 physical CPUs and the BSD box is currently the only running VM. Only one virtual CPU is assigned to the VM. When measuring CPU time of a specific program, I get very different results from time to time. Processor usage is reported differently by VMware, based on the system load. Is it possible to assign a constant share of a physical CPU to specific VM? I would like the CPU time to be more or less much constant. I tried setting CPU reservation when configuring VM in the VMware Infrastructure Client, but the CPU time still varies a lot. Thanks in advance!

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >