Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 89/1660 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• nginx and php-fpm - Cannot write PHP error log

  - by SteveEdson

  I am using Nginx and PHP-FPM on Linux. I am not sure whether the issue is that PHP is not writing to the location specified in the PHP.ini, or if it just isn't working at all. Some of the logs produced by Nginx and PHP-FPM contain the PHP errors, but they are mixed in with other Nginx log output. When I run phpInfo(), value in the error_log is set to a folder in my home directory, but nothing is ever created. I understand that values in the Nginx conf and PHP-FPM conf can overwrite those set in the PHP.ini, but surely running phpInfo(), would show the final config values? I would like to be able to have 1 folder, with seperate files for the Nginx access and error log as well as PHP errors. Thanks.

  Read the article

• iSCSI errors continue after removing inaccessible target portal

  - by Ansgar Wiechers

  By mistake I entered an iSCSI target portal address in the iSCSI Initiator on one of our virtual servers that does not have an address in the network range used for iSCSI. This caused the following errors/warnings to appear in the eventlog: Log Name: System Source: MSiSCSI Event ID: 113 Level: Warning Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *192.168.23.42 0003260 Root\ISCSIPRT\0000_0 . Log Name: System Source: iScsiPrt Event ID: 1 Level: Error Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data. Log Name: System Source: iScsiPrt Event ID: 70 Level: Error Description: Error occurred when processing iSCSI logon request. The request was not retried. Error status is given in the dump data. So far that's expected beahvior, so I removed the portal from the iSCSI Initiator as described in MSKB 976072. However, the errors/warnings keep appearing every hour, even though neither iSCSI Initiator GUI nor iscscli show any portals: C:\>iscsicli ListTargetPortals Microsoft iSCSI Initiator Version 6.1 Build 7601 The operation completed successfully. The problem persists after rebooting the server. Uninstalling the Microsoft iSCSI Initiator device via devmgmt.msc as well as changing the Initiator parameters like this: [HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-BFC1-08002BE10318}] "MaxPendingRequests"=dword:00000001 "MaxConnectionRetries"=dword:00000001 "MaxRequestHoldTime"=dword:00000005 didn't help either. Each change was followed by a reboot. Disabling the device does prevent the errors/warnings from re-appearing, of course, but I'd rather not have to resort to this. How can I prevent those errors and warnings from appearing (short of disabling the initiator device or re-installing the server)? What am I missing? Environment: The virtual machine runs on a Hyper-V cluster managed by SCVMM 2012. Hosts and guests run Windows Server 2008 R2 SP1. The physical machines are Dell PowerEdge M710HD blades.

  Read the article

• Sudo yum seems to fail on CentOS, but works fine after sudo -i

  - by Aron Rotteveel

  I am currently having some trouble with yum through sudo. For some reason, it does not seem to work: aron@graviton [/var/log]# sudo yum clean all There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/python2.4/lib-dynload/datetime.so: failed to map segment from shared object: Cannot allocate memory Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq The strange thing, however, is that it works fine when I gain root privileges through sudo -i first. Any ideas what might be causing this problem?

  Read the article

• My current iptable configuration doesn't work [on hold]

  - by Brad

  sudo chkconfig iptables off /etc/init.d/iptables on ### Clear/flush iptables sudo iptables -F sudo iptables -P INPUT ACCEPT sudo iptables -P OUTPUT ACCEPT sudo iptables -P FORWARD ACCEPT ### Allow SSH iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT ### Allow YUM updates sudo iptables -A OUTPUT -o eth0 -p tcp --dport 80 --match owner --uid-owner 0 --state NEW,ESTABLISHED -j ACCEPT sudo iptables -A OUTPUT -o eth0 -p tcp --dport 443 --match owner --uid-owner 0 --state NEW,ESTABLISHED -j ACCEPT ### Add your rules form the link above, here # ftp,smtp,imap,http,https,pop3,imaps,pop3s sudo iptables -A INPUT -i eth0 -p tcp -m multiport --dports 21,25,143,80,443,110,993,995 -m state --state NEW,ESTABLISHED -j ACCEPT sudo iptables -A OUTPUT -o eth0 -p tcp -m multiport --sports 21,25,143,80,110,443,993,995 -m state --state NEW,ESTABLISHED -j ACCEPT ## allow dns sudo iptables -A OUTPUT -p udp -o eth0 --dport 53 -j ACCEPT && sudo iptables -A INPUT -p udp -i eth0 --sport 53 -j ACCEPT # handling pings sudo iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT && sudo iptables -A OUTPUT -p icmp --icmp-type echo-reply -j ACCEPT sudo iptables -A OUTPUT -p icmp --icmp-type echo-request -j ACCEPT && sudo iptables -A INPUT -p icmp --icmp-type echo-reply -j ACCEPT # manage ddos attacks sudo iptables -A INPUT -p tcp --dport 80 -m limit --limit 25/minute --limit-burst 100 -j ACCEPT ## Implement some logging so that we know what's getting dropped sudo iptables -N LOGGING sudo iptables -A INPUT -j LOGGING sudo iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables Packet Dropped: " --log-level 7 sudo iptables -A LOGGING -j DROP # once a rule affects traffic then it is no longer managed # so if the traffic has not been accepted, block it sudo iptables -A INPUT -j DROP sudo iptables -I INPUT 1 -i lo -j ACCEPT sudo iptables -A OUTPUT -j DROP # allow only internal port forwarding sudo iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT sudo iptables -P FORWARD DROP # create an iptables config file sudo iptables-save > /root/dsl.fw ### Append the following to the rc.local file sudo nano /etc/rc.local ####--- /sbin/iptables-restore < sudo /root/dsl.fw ####--- /etc/init.d/iptables save ## check to see if this setting is working great. sudo service iptables restart ## log out/in testing sudo chkconfig iptables on What is the problem with this setup? If I restart the server it doesn't allow me back in SSH, and there may be a problem with Yum Original source of information: https://gist.github.com/Jonathonbyrd/1274837#file-instructions

  Read the article

• Troubleshooting mailserver (Postfix, Dovecot) on Ubuntu Server 9.10?

  - by Christoffer

  Hi, I have configured a mail server with Postfix and Dovecot on Ubuntu Server 9.10. I followed the guidelines here (using Maildir): https://help.ubuntu.com/community/Postfix https://help.ubuntu.com/community/Dovecot The tests seemed alright so I connected it to GMail which is able to connect and fetch e-mails. But since there's no e-mail in the Maildir/ directory I can't decide if the problem is Postfix or Dovecot. And I am totally new to mailservers so I don't know where to start troubleshooting. So, I want to start by testing Dovecot. How can I create a fake "Hello World"-email directly on the server (using a text editor) so that I can try to fetch it with GMail? If Dovecot is alright, where do I start looking for errors in Postfix? Thank you for your time. Christoffer

  Read the article

• Stange stream of HTTP GET requests in apache logs, from amazon ec2 instances

  - by Alexandre Boeglin

  I just had a look at my apache logs, and I see a lot of very similar requests: GET / HTTP/1.1 User-Agent: curl/7.24.0 (i386-redhat-linux-gnu) libcurl/7.24.0 \ NSS/3.13.5.0 zlib/1.2.5 libidn/1.18 libssh2/1.2.2 Host: [my_domain].org Accept: */* there's a steady stream of those, about 2 or 3 per minute; they all request the same domain and resource (there are slight variations in user agent version numbers); they come form a lot of different IPv4 and IPv6 addresses, in blocs that belong to amazon ec2 (in Singapore, Japan, Ireland and the USA). I tried to look for an explanation online, or even just similar stories, but couldn't find any. Has anyone got a clue as to what this is? It doesn't look malicious per say, but it's just annoying me, and I couldn't find any more information about it. I first suspected it could be a bot checking if my server is still up, but: I don't remember subscribing to such a service; why would it need to check my site twice every minute; why doesn't it use a clearly identifying fqdn. Or, should I send this question to amazon, via their abuse contact? Thanks!

  Read the article

• Why does the IIS_IUSRS user need read permission on the ApplicationHost.config file in my Exchange 2010 OWA environment?

  - by CrabbyAdmin

  Previously I was experiencing issues where users in my Exchange 2010 environment would periodically receive an error stating: The custom error module does not recognize this error. However, following the advice of a thread I read somewhere, I granted the computername\IIS_IUSRS user Read permissions on the ApplicationHost.config file in the OWA environment. After making this change, the problem has not yet resurfaced. However, I'm not satisfied to simply settle for the fix, I'd like to understand why it worked. So can somebody please tell me why does this user need read permissions on this file and why would that have resolved the issue?

  Read the article

• Commercial SIP Trunking in mainland China [closed]

  - by Patrick

  Is there any regulation preventing the use/sale of SIP trunks in mainland China? I've set up and used commercial-grade SIP trunks in places where previously we would have used ISDN T1/E1 connections. Here in Shanghai I'm looking for a similar service, and while E1 30B+D services are readily available, every telecoms company we speak with says that SIP trunking is not available in China with re-sellers of both China Telecom and China Unicom. But no one seems to know why. It seems logical to me that SIP trunks are cheaper to operate than ISDN services given that the first mile transit can be run over already-existing Internet infrastructure, and SIP signaling reduces the amount of configuration required by subscribers which is why it appeals to me. As such I've come to expect SIP services to be available in modern markets, and I've used them in quite a few countries. For example, one place I know it's not possible is in India. Government regulations in India make it illegal to provide PSTN service using VoIP. (Citations: 1, 2). However it seems this may be changing. Perhaps China has something similar.

  Read the article

• ubuntu bind9 AppArmor read permission denied (chroot jail)

  - by Richard Whitman

  I am trying to run bind9 with chroot jail. I followed the steps mentioned at : http://www.howtoforge.com/debian_bind9_master_slave_system I am getting the following errors in my syslog: Jul 27 16:53:49 conf002 named[3988]: starting BIND 9.7.3 -u bind -t /var/lib/named Jul 27 16:53:49 conf002 named[3988]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Jul 27 16:53:49 conf002 named[3988]: adjusted limit on open files from 4096 to 1048576 Jul 27 16:53:49 conf002 named[3988]: found 4 CPUs, using 4 worker threads Jul 27 16:53:49 conf002 named[3988]: using up to 4096 sockets Jul 27 16:53:49 conf002 named[3988]: loading configuration from '/etc/bind/named.conf' Jul 27 16:53:49 conf002 named[3988]: none:0: open: /etc/bind/named.conf: permission denied Jul 27 16:53:49 conf002 named[3988]: loading configuration: permission denied Jul 27 16:53:49 conf002 named[3988]: exiting (due to fatal error) Jul 27 16:53:49 conf002 kernel: [74323.514875] type=1400 audit(1343433229.352:108): apparmor="DENIED" operation="open" parent=3987 profile="/usr/sbin/named" name="/var/lib/named/etc/bind/named.conf" pid=3992 comm="named" requested_mask="r" denied_mask="r" fsuid=103 ouid=103 Looks like the process can not read the file /var/lib/named/etc/bind/named.conf. I have made sure that the owner of this file is user bind, and it has the read/write access to it: root@test:/var/lib/named/etc/bind# ls -atl total 64 drwxr-xr-x 3 bind bind 4096 2012-07-27 16:35 .. drwxrwsrwx 2 bind bind 4096 2012-07-27 15:26 zones drwxr-sr-x 3 bind bind 4096 2012-07-26 21:36 . -rw-r--r-- 1 bind bind 666 2012-07-26 21:33 named.conf.options -rw-r--r-- 1 bind bind 514 2012-07-26 21:18 named.conf.local -rw-r----- 1 bind bind 77 2012-07-25 00:25 rndc.key -rw-r--r-- 1 bind bind 2544 2011-07-14 06:31 bind.keys -rw-r--r-- 1 bind bind 237 2011-07-14 06:31 db.0 -rw-r--r-- 1 bind bind 271 2011-07-14 06:31 db.127 -rw-r--r-- 1 bind bind 237 2011-07-14 06:31 db.255 -rw-r--r-- 1 bind bind 353 2011-07-14 06:31 db.empty -rw-r--r-- 1 bind bind 270 2011-07-14 06:31 db.local -rw-r--r-- 1 bind bind 2994 2011-07-14 06:31 db.root -rw-r--r-- 1 bind bind 463 2011-07-14 06:31 named.conf -rw-r--r-- 1 bind bind 490 2011-07-14 06:31 named.conf.default-zones -rw-r--r-- 1 bind bind 1317 2011-07-14 06:31 zones.rfc1918 What could be wrong here?

  Read the article

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• How to secure JBoss application server using SELinux

  - by Jakub Elias

  I want to secure RedHat 5.4 application server by SELinux (targeted policy) and have several questions 1, where can i get SELinux sources (/etc/selinux//src/policy/)There seems to be no such package on install cd .. 2, how to restrict user rights (for example user jboss could not modify /etc/my.cnf) 3, how to configure JBoss application server to work under SELinux Although i read many documents from NSA the whole topic is still not clear for me.What i want is to basically protect filesystem in case one account is broken.I cannot find any materials about securing jboss server using either chroot jail, ACLs or SELinux ....

  Read the article

• MySQL Workbench: Orphaned document changes detected

  - by Zishan

  Each time I open MySQL Workbench, I get this annoying message at the bottom of the screen saying "Orphaned document changes detected". It comes up whether I close all the SQL Editor workspaces or not. Dismissing the error doesn't help either. I did a Google search of the exact error message but it only yields four results. Anyone here who has faced the same issue in the past? How do I clean up these "orphaned documents" or completely disable this message? FYI: I'm using Windows 7 Ultimate x64 and the only customization that's made to MySQL Workbench is that I've disabled the query results limit.

  Read the article

• certutil -ping fails with 30 seconds timeout - what to do?

  - by mark

  The certificate store on my Win7 box is constantly hanging. Observe: C:\1.cmd C:\certutil -? | findstr /i ping -ping -- Ping Active Directory Certificate Services Request interface -pingadmin -- Ping Active Directory Certificate Services Admin interface C:\set PROMPT=$P($t)$G C:\(13:04:28.57)certutil -ping CertUtil: -ping command FAILED: 0x80070002 (WIN32: 2) CertUtil: The system cannot find the file specified. C:\(13:04:58.68)certutil -pingadmin CertUtil: -pingadmin command FAILED: 0x80070002 (WIN32: 2) CertUtil: The system cannot find the file specified. C:\(13:05:28.79)set PROMPT=$P$G C:\ Explanations: The first command shows you that there are –ping and –pingadmin parameters to certutil Trying any ping parameter fails with 30 seconds timeout (the current time is seen in the prompt) This is a serious problem. It screws all the secure communication in my app. If anyone knows how this can be fixed - please share. Thanks. P.S. 1.cmd is simply a batch of these commands: certutil -? | findstr /i ping set PROMPT=$P($t)$G certutil -ping certutil -pingadmin set PROMPT=$P$G EDIT1 I have succeeded to pin down the single windows API that causes the problem - DsGetDcName According to the windbg, the certutil -ping invokes it like so: PDOMAIN_CONTROLLER_INFO pdci; DWORD ret = ::DsGetDcName(NULL, NULL, NULL, NULL, DS_DIRECTORY_SERVICE_PREFERRED, &pdci); On my workstation it times out for 30 seconds and then returns error code 1355, which is ERROR_NO_SUCH_DOMAIN No domain controller is available for the specified domain or the domain does not exist. On another machine, which is accidentally a windows server 2003, it returns almost immediately with the correct domain controller name inside the returned DOMAIN_CONTROLLER_INFO structure. Now the question is what is missing on my workstation for that API to find the correct domain controller?

  Read the article

• PhpMyAdmin (on ubuntu lamp): Login without a password is forbidden by configuration (see AllowNoPass

  - by meyosef

  Hi, My mysql password = '' i try to login to PhpMyAdmin (on Ubuntu 10.04 lamp) and get error: Login without a password is forbidden by configuration (see AllowNoPassword) What should i do for enter to phpMyAdmin without set password? Thanks

  Read the article

• EC2 hosted service multi-tenant dynamic DNS solution

  - by accidental admin

  I want to change the model of my EC2 hosted service to have a separate sub domain for each tenant (ie. .example.com). My primary DNS is now with dnsmadeeasy.com, but their dynamic DNS offering seem pretty weak: it requires the API to use my full dnsmadeeasy.com account credentials, I rather have the API use a limited privilege credential that can only add/remove/modify subdomain records from what I gather it only allows to modify existing records, does not allow me to dynamically add/remove records for new tenant subdomains My question what are my alternatives? Is there something in the dnsmadeeasy API offering I misunderstood and I should just use them? Is there some other similar DNS service that has a DDNS offering that satisfies my requirements? Or should I just bite the bullet and host my own DNS (my fear is not configuration/learning/know how, my fear is reliability). If you recommend the latter, can you detail the necessary steps or a link to a good tutorial how to?

  Read the article

• ISA Server 2006 SP1 :: Allow unauthenticated users (non domain users) access to external (internet)

  - by Klaptrap

  Now that we have applied an internal to external rule blocking all users access to the internet, other than those users in a whitelist, we have the obvious issue of non authenticated users, not on our domain, i.e.; domain-less guests not being able to access the internet. Other than configuring each machine to use our alternative gateway - which would require a member of IT to be onsite everytime a guest arrives - can this be done through ISA adn AD?

  Read the article

• Problem connecting a 3Com 2952-Plus switch to a Cisco 3750 switch

  - by Noel

  Connected a 3Com 2952-SFP Plus switch to a Cisco 3750 switch via fibre. There is a light on the 3Com end, but nothing at the Cisco end, and no traffic will flow. Have swapped SFP's, have swapped fibre cables, have used a different port on the Cisco, have even swapped the 3Com switch, but still no joy. When I connect a 3Com 2948 switch over fibre that works OK. Any ideas?

  Read the article

• Drop outs when accessing share by DFS name.

  - by Stephen Woolhead

  I have a strange problem, aren't they all! I have a DFS root \domain\files\vms, it has a single target on a different server than the namespace. I can copy a test file set from the target directly via \server\vms$\testfiles and all is well, the files copy fine. I have repeated these tests many times. If I try and copy the files from the dfs root I get big pauses in the network traffic, about 50 seconds every couple of minutes, all the traffic just stops for the copy. If I start another copy between the same two machines during this pause, it starts copying fine, so I know it's not an issue with the disks on the server. Every once in a while the copy will fail, no errors, the progress bar will just zip all the way to 100% and the copy dialog will close. Checking the target folder show that the copy is incomplete. I've moved the LUN to another server and had the same problem. The servers are all 2008 R2, the clients are Vista x64, Windows7 x64 and 2008 R2, all have the same problem. Anyone got any ideas? Cheers, Stephen More Information: I've been running a NetMon trace on the connection when the file copy fails and what seems to be standing out is that when opening a file that the copy completes on the SMB command looks like this: SMB2: C CREATE (0x5), Name=Training\PDC2008\BB34 Live Services Notifications, Awareness, and Communications.wmv@#422082, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 245376 SMB2: R CREATE (0x5), Context=MxAc, Context=RqLs, Context=DHnQ, Context=QFid, FID=0xFFFFFFFF00000015, Mid = 245376 But for the last file when the copy dialog closes looks like this: SMB2: C CREATE (0x5), Name=gt\files\Media\Training\PDC2008\BB36 FAST Building Search-Driven Portals with Microsoft Office SharePoint Server 2007 and Microsoft Silverlight.wmv@#859374, Context=DHnQ, Context=MxAc, Context=QFid, Context=RqLs, Mid = 77 SMB2: R , Mid = 77 - NT Status: System - Error, Code = (58) STATUS_OBJECT_PATH_NOT_FOUND The main difference seems to be in the name, one is relative to the open file share, the other has gained the gt\files\media prefix which is the name of the DFS target. These failures are always preceded by logoff and back on of the SMB target. Might have to bump this one to PSS.

  Read the article

• How to ask memcached auth connection by sasl and pam?

  - by user199216

  I use memcached in a untrust network, so I try to use sasl and pam to auth connection to memcached. I installed sasl and pam module, compiled and installed memcached with sasl enabled. Also I created db and table for pam user. I run: $ sudo testsaslauthd -u tester -p abc123 -s /etc/pam.d/memcached 0: OK "Success." where the tester and abc123 is the authed user in db, which I inserted. But my python script cannot be authed, always authentication failed returned. It seems it dose not use pam to authentication, still use sasldb, because when I add user by: $ sudo saslpasswd2 -a memcached -c tester and input password: abc123, It can passed. Python script: client = bmemcached.Client(('localhost:11211'), 'tester', 'abc123') and error: bmemcached.exceptions.MemcachedException: Code: 32 Message: Auth failure. memcached log: authenticated() in cmd 0x21 is true mech: ``PLAIN'' with 14 bytes of data SASL (severity 2): Password verification failed sasl result code: -20 Unknown sasl response: -20 >30 Writing an error: Auth failure. >30 Writing bin response: no auth log found in: /var/log/auth.log Configurations: vi /etc/default/saslauthd MECHANISMS="pam" vi /etc/pam.d/memcached auth sufficient pam_mysql.so user=sasl passwd=abc123 host=localhost db=sasldb table=sasl_user usercolumn=user_name passwdcolumn=password crypt=0 sqllog=1 verbose=1 account required pam_mysql.so user=sasl passwd=abc123 host=localhost db=sasldb table=sasl_user usercolumn=user_name passwdcolumn=password crypt=0 sqllog=1 verbose=1 vi /etc/sasl2/memcached.conf pwcheck_method: saslauthd Do I make my question clear, english is not my native language, sorry! Any tips will be thankful!

  Read the article

• Squid external_acl_type Cannot run process

  - by Alex Rezistorman

  I want to restrict uploading for group of the users via squid. So I've choosen to use external_acl_type but after reload of the squid it returns error. WARNING: Cannot run '/usr/local/etc/squid/lists/newupload.sh' process. Permissions of newupload.sh and squid are the same. newupload.sh is executive. How can I solve this problem? Thnx in advance. newupload.sh #!/bin/sh while read line; do set -- $line length=$1 limit=$2 if [ -z "$length" ] || [ "$length" -le "$2" ]; then echo OK else echo ERR fi done Strings from squid.conf external_acl_type request_body protocol=2.5 %{Content-Lenght} /usr/local/etc/squid/lists/newupload.sh acl request_max_size external request_body 5000 http_access allow users request_max_size Squid version squid -v Squid Cache: Version 3.2.13 configure options: '--with-default-user=squid' '--bindir=/usr/local/sbin' '--sbindir=/usr/local/sbin' '--datadir=/usr/local/etc/squid' '--libexecdir=/usr/local/libexec/squid' '--localstatedir=/var' '--sysconfdir=/usr/local/etc/squid' '--with-logdir=/var/log/squid' '--with-pidfile=/var/run/squid/squid.pid' '--with-swapdir=/var/squid/cache/squid' '--enable-auth' '--enable-build-info' '--enable-loadable-modules' '--enable-removal-policies=lru heap' '--disable-epoll' '--disable-linux-netfilter' '--disable-linux-tproxy' '--disable-translation' '--enable-auth-basic=PAM' '--disable-auth-digest' '--enable-external-acl-helpers= kerberos_ldap_group' '--enable-auth-negotiate=kerberos' '--disable-auth-ntlm' '--without-pthreads' '--enable-storeio=diskd ufs' '--enable-disk-io=AIO Blocking DiskDaemon IpcIo Mmapped' '--enable-log-daemon-helpers=file' '--disable-url-rewrite-helpers' '--disable-ipv6' '--disable-snmp' '--disable-htcp' '--disable-forw-via-db' '--disable-cache-digests' '--disable-wccp' '--disable-wccpv2' '--disable-ident-lookups' '--disable-eui' '--disable-ipfw-transparent' '--disable-pf-transparent' '--disable-ipf-transparent' '--disable-follow-x-forwarded-for' '--disable-ecap' '--disable-icap-client' '--disable-esi' '--enable-kqueue' '--with-large-files' '--enable-cachemgr-hostname=proxy.adir.vbr.ua' '--with-filedescriptors=131072' '--disable-auto-locale' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' '--build=amd64-portbld-freebsd8.3' 'build_alias=amd64-portbld-freebsd8.3' 'CC=cc' 'CFLAGS=-O2 -fno-strict-aliasing -frename-registers -fweb -fforce-addr -fmerge-all-constants -maccumulate-outgoing-args -pipe -march=core2 -I/usr/local/include -DLDAP_DEPRECATED' 'LDFLAGS= -L/usr/local/lib' 'CPPFLAGS=-I/usr/local/include' 'CXX=c++' 'CXXFLAGS=-O2 -fno-strict-aliasing -frename-registers -fweb -fforce-addr -fmerge-all-constants -maccumulate-outgoing-args -pipe -march=core2 -I/usr/local/include -DLDAP_DEPRECATED' 'CPP=cpp' --enable-ltdl-convenience Related post: Restrict uploading for groups in squid http://squid-web-proxy-cache.1019090.n4.nabble.com/flexible-managing-of-request-body-max-size-with-squid-2-5-STABLE12-td1022653.html

  Read the article

• supermicro server ipmi problem - problem with keyboard layout

  - by maxs

  hi, we hava a supermicro server (x8dtl-if-O with suse 11): if i connect from my workstation (xppro-german)with the remote console i can not type any öä<... (on the server local - we have no problems - only remote). the keyboard layout of the workstation is german - if i switch the keyboard layout to english i can type öäü.... - but i don't can type <| ?? thx

  Read the article

• Multiple INET sockets (mulple IP's too) connected to UNIX sockets

  - by Andrew

  HOST = same host all the time, accepts multiple connection. I have a dedicated server and I will buy extra IP's. Socket 1 connects to HOST:PORT, from IP-1 Socket 2 connects to HOST:PORT, from IP-1 Socket 3 connects to HOST:PORT, from IP-1 Socket 4 connects to HOST:PORT, from IP-2 Socket 5 connects to HOST:PORT, from IP-2 Socket 6 connects to HOST:PORT, from IP-2 After creating all sockets I want to access them easy as UNIX sockets from PHP. /sys/socket1 /sys/socket2 /sys/socket3 /sys/socket4 /sys/socket5 /sys/socket6 I want the sockets to work in background (like daemon) and I want to be able to connect from PHP to any of this sockets and RECV/SEND whatever I want. I saw "socat" and I think that's the solution for me, please tell me how to use socat, or how to do it other way. Thankyou!

  Read the article

• Can't connect to website after altering IPTables

  - by user2833135

  I attempted to open up a port on my VPS, but I can't connect to my website after opening up that port. Below are the commands I issued to open the port. I didn't get an error or anything after setting this up. I just can't connect to my website after doing this. [root@vps ~]# iptables -F [root@vps ~]# iptables -A INPUT -i lo -j ACCEPT [root@vps ~]# iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT [root@vps ~]# iptables -A INPUT -p tcp --dport 25765 -j ACCEPT [root@vps ~]# iptables -P INPUT DROP [root@vps ~]# iptables -P FORWARD DROP [root@vps ~]# iptables -P OUTPUT ACCEPT [root@vps ~]# iptables -L -v Just a side note, but I am running CentOS 6 (64 bit) Thank you in advance.

  Read the article

• Cloudmin KVM DNS hostnames not working

  - by dannymcc

  I have got a new server which has Cloudmin installed. It's working well and I can create and manage VM's as expected. The server came with a /29 subnet and I requested an additional /29 subnet to allow for more virtual machines. I didn't want to replace the existing /29 subnet with a /28 because that would have caused disruption with my existing VM's. To make life easier I decided to configure a domain name for the Cloudmin host server to allow for automatic hostname setup whenever I create a new virtual machine. I have a domain name (example.com) and I have created an NS record as follows: NS kvm.example.com 123.123.123.123 A kvm.example.com 123.123.123.123 In the above example the IP address is that of the host server, I also have two /29 subnets routed to the server. Now, I've added the two subnets to the Cloudmin administration panel as follows: I've tried to hide as little information as possible without giving all of the server details away! If I ping kvm.example.com I get a response from 123.123.123.123, if I ping the newly created virtual machine (example.kvm.example.com) it fails, and if I ping the IP address that's been assigned to the new virtual machine (from the second subnet) it fails. Am I missing anything vital? Does this look (from what little information I can show) like it's setup correctly? Any help/pointers would be appreciated. For reference the Cloudmin documentation I am using as a guide is http://www.virtualmin.com/documentation/cloudmin/gettingstarted

  Read the article

• Fatal error: Incompatible file format: The encoded file has format major ID 1, whereas the Loader expects 4 in ... on line 0

  - by Eugene

  I am using Ubuntu 10.04 and for some time I had to keep a downgraded PHP 5.2 package because I need to run Zend encrypted scripts. Recently I noticed that Zend released beta version of their loader (http://forums.zend.com/viewtopic.php?f=57&t=1365&start=80#p22073) so I updated to the native PHP 5.3 package, downloaded the .so file, added this to php.ini ;zend_extension=/etc/php5/ZendOptimizer.so zend_extension=/etc/php5/ZendGuardLoader.so zend_loader.enable=1 zend_loader.disable_licensing=0 zend_loader.obfuscation_level_support=3 and restarted the server. Now I am getting this error: Fatal error: Incompatible file format: The encoded file has format major ID 1, whereas the Loader expects 4 in ... on line 0 Do you by chance know an easy fix for this? Or should I downgrade back and wait till when they release something more stable?

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >