Search Results

Search found 57327 results on 2294 pages for 'nested set'.

Page 906/2294 | < Previous Page | 902 903 904 905 906 907 908 909 910 911 912 913  | Next Page >

• route lan traffic through wirless mifi

  - by Randall Blake

  I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

  Read the article

• How can I filter packets from a port monitor?

  - by engineerchuan

  I have some data going from Point A to Point B. I have a SPAN monitor set up to a monitoring device C. To recreate some real world scenarios, I want to filter out all traffic which is a certain type (H.323 VoIP Signaling Packets) so that C sees a subset of the information that is flowing from A to B. What would the easiest way to do this be? I assume I would need a computer with 2 NIC cards and some software to examine each packet and chuck out the H.323 VoIP packets? Thanks!

  Read the article

• Why can't I wrap text around grouped images in Word?

  - by Ivo Flipse

  When I paste two images into Microsoft Word and I set Wrap Text to Square and then group them so they stick nicely together, I can no longer Wrap Text around this newly grouped image. Any explanation to why text wrapping is disabled for grouped images? Note: if I don't change the Wrap Text option, I can't group them. This is for Word 2010 on Windows 7, but I've had this problem with every version of Word.

  Read the article

• How to measure disk performance?

  - by Jakub Šturc

  I am going to "fix" a friend's computer this weekend. By the symptoms he describes it looks like he has a disk performance problem with his 5400 rpm disk. I want to be sure that disk is the problem so I want to "scientificaly" measure the performance. Which tools do you recommend me for this job? Is there any standard set of numbers I can compare the result of measurement with?

  Read the article

• Iptables config breaks Java + Elastic Search communication

  - by Agustin Lopez

  I am trying to set up a firewall for a server hosting a java app and ES. Both are on the same server and communicate to each other. The problem I am having is that my firewall configuration prevents java from connecting to ES. Not sure why really.... I have tried lot of stuff like opening the port range 9200:9400 to the server ip without any luck but from what I know all communication inside the server should be allowed with this configuration. The idea is that ES should not be accessible from outside but it should be accessible from this java app and ES uses the port range 9200:9400. This is my iptables script: echo -e Deleting rules for INPUT chain iptables -F INPUT echo -e Deleting rules for OUTPUT chain iptables -F OUTPUT echo -e Deleting rules for FORWARD chain iptables -F FORWARD echo -e Setting by default the drop policy on each chain iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -P FORWARD DROP echo -e Open all ports from/to localhost iptables -A INPUT -i lo -j ACCEPT echo -e Open SSH port 22 with brute force security iptables -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m recent --set --name SSH --rsource iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 4 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --rcheck --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j LOG --log-prefix "SSH brute force " iptables -A INPUT -p tcp -m tcp --dport 22 -m recent --update --seconds 30 --hitcount 3 --rttl --name SSH --rsource -j REJECT --reject-with tcp-reset iptables -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT echo -e Open NGINX port 80 iptables -A INPUT -p tcp --dport 80 -j ACCEPT echo -e Open NGINX SSL port 443 iptables -A INPUT -p tcp --dport 443 -j ACCEPT echo -e Enable DNS iptables -A INPUT -p tcp -m tcp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -p udp -m udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT And I get this in the java app when this config is in place: org.elasticsearch.cluster.block.ClusterBlockException: blocked by: [SERVICE_UNAVAILABLE/1/state not recovered / initialized];[SERVICE_UNAVAILABLE/2/no master]; at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.postProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:292) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1185) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:537) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:475) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:304) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:228) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:300) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:195) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:700) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:760) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:482) at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:403) Do any of you see any problem with this configuration and ES? Thanks in advance

  Read the article

• Can an administration extraction of an MSI file perform registry and/or system wide changes?

  - by Wil

  I am always getting MSI (or setup EXEs which are basically MSI) files, and half the time they really do not need to be a setup. Microsoft is probably one of the biggest sources - almost every time I want to download a little source code sample, it has a MSI which if you install, only usually has three files. I would rather not do an install and add it to the add/remove programs and who knows what else (although I am sure it wouldn't be that bad) for the sake of three files! For this reason, I always use the following command: MSIEXEC /a <filename.msi> /qb TARGETDIR=<directory name> Now, this works fine and I have never had problems... However, I was just browsing some articles on Technet and found the following resource about administration installs. Apparently, MSI files can have two sequences: The AdminUISequence Table and the AdminExecuteSequence Table. I am not so worried about the AdminUISequence Table as it states that "The installer skips the actions in this table if the user interface level is set to basic UI or no UI", and this is what the /qb switch I use does. However, there is nothing similar written against AdminExecuteSequence Table. I realise that many people who write MSI files simply do it for a single end user and probably do not even touch the admin install options, however, is it possible for them to set items that can affect the system and if so, is there a fail proof way of extracting? I do already use 7-zip, however despite it being on the "supported" page, MSI support is lacking... well... completely sucks. It looses the file names and is generally useless. They have a bug which was closed with no reason/resolution over three years ago, and I opened a forum post and haven't had a reply. I would not really want to install any additional programs if I could help it and just want peoples opinions on this. Thanks. edit - Should also say, I run with UAC on, and I have never ever had a elevation prompt whilst performing the MSIEXEC operation, so I am guessing I have never had a system wide change, however, I am still curious as to if it is possible... As if changes (even just to the user) are possible I would do this locally/in a VM and never on a server or place of importance!

  Read the article

• Export from OneNote 2007 to Word and retain outline styles

  - by Dave Johnson

  OneNote 2007 has the ability to export to Microsoft Word (File | Send To | Microsoft Office Word); however, I'm looking for a way to export to Microsoft Word and retain the outline levels so that it can be easily formatted with Word styles rather than having to manually set the outline levels in Word Outline mode after exporting.

  Read the article

• COM port on VirtualBox, XP

  - by Alex Farber

  I am using Sun VirtualBox v. 3.1.4 on WinXP. Host OS is also WinXP. In the Host Machine settings, Serial Ports, Port 1, I set: Enable Serial Port Port Number: COM1 Port Mode: Host Device Port File/Path: COM1 In the Host OS Device Manager I don't see COM1 port. What is wromg?

  Read the article

• Outlook 2003: authentication before sending doesn’t work (probably command sequence problem)

  - by Fuxi

  hi, i'm having problems with outlook 2003 + smtp authentication. although it's set in outlook, my mailserver won't relay - which means, outlook is trying to mail BEFORE authenticating. i've tried the same with thunderbird, auth + sending works without problems. so it definately must be something in outlook and it's command-sequence - what could be wrong? thx

  Read the article

• how to do automatic backup of running vmware virtual machine?

  - by Radek

  I want to do regular automatic backup of my vmware virtual machine (16GB big, Windows XP) that is running I do not have an access to ESX admin. I can ask our admin to set up something in the admin area but I do not have access for myself. I have installed few programs that are important to me so I want to have working backup at any point of time. Note: I know I can copy all the files when the virtual machine is not up and running.

  Read the article

• Need Advice: What Linux distro should I install on an old PowerPC Mac

  - by rockit

  I'm trying to set up my brother - who has a PPC mac, with 1 ghz processor and 256 ram, with a Linux distro that would allow him to surf the web on the device. If anyone knows of this mac, they also know that support has faded for the new browsers rendering the device essentially useless when it comes to the web. Ideally I would have installed jolicloud - but alas, it is only intel mac compatible... Please let me know if you have any suggestions for me!

  Read the article

• Sendmail relay authentication

  - by Pawel Veselov

  I'm trying to set up my sendmail to authenticate against a relay (comcast). I'm not seeing any attempts to authenticate at all. I'm trying to just debug how authentication works, and can't connect all the pieces... I have, in my .mc file: define(`RELAY_MAILER_ARGS', `TCP $h 587')dnl define(`SMART_HOST', `relay:smtp.comcast.net.')dnl define(`confAUTH_MECHANISMS', `PLAIN')dnl FEATURE(`authinfo',`hash /etc/mail/client-info')dnl And in my /etc/mail/client-info: AuthInfo:*.comcast.net "U:root" "I:comcast_user" "P:comcast_password" Now, I know everything is fine with the u/p, as I could authenticate directly through SMTP, using telnet. There are two things I don't understand. When AuthInfo records are searched for, they are matched by the target hostname. How? Does it it use the map key (something I would expect), or uses the so-called "Domain" ("R:" parameter that I don't set in my auth-info line) What is "U:", really? Sendmail README (http://www.sendmail.org/m4/smtp_auth.html) says it's "user(authoraztion id)", and "I:" is "authentication ID". That suggests that my username should be in "U:", actually, but http://www.sendmail.org/~ca/email/auth.html says that "I:" is your remote user name. The session looks like this: [root@manticore]/etc/mail# sendmail -qf -v Warning: Option: AuthMechanisms requires SASL support (-DSASL) Running /var/spool/mqueue/p97CgcWq023273 (sequence 1 of 399) [email protected]... Connecting to smtp.comcast.net. port 587 via relay... 220 omta19.westchester.pa.mail.comcast.net comcast ESMTP server ready >>> EHLO my.host.name 250-omta19.westchester.pa.mail.comcast.net hello [my.ip.add.res], pleased to meet you 250-HELP 250-AUTH LOGIN PLAIN 250-SIZE 15728640 250-ENHANCEDSTATUSCODES 250-8BITMIME 250-STARTTLS 250 OK >>> STARTTLS 220 2.0.0 Ready to start TLS >>> EHLO my.host.name 250-omta19.westchester.pa.mail.comcast.net hello [my.ip.add.res], pleased to meet you 250-HELP 250-AUTH LOGIN PLAIN 250-SIZE 15728640 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 OK >>> MAIL From:<> SIZE=2183 550 5.1.0 Authentication required MAILER-DAEMON... aliased to postmaster postmaster... aliased to root root... aliased to [email protected] postmaster... aliased to root root... aliased to [email protected] >>> RSET 250 2.0.0 OK [root@manticore]/etc/mail# sendmail -d0.1 Version 8.14.3 Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS PIPELINING SCANF SOCKETMAP STARTTLS TCPWRAPPERS USERDB XDEBUG Thanks, Pawel.

  Read the article

• MySQL: Pacemaker cannot start the failed master as a new slave?

  - by quanta

  I'm going to setup failover for MySQL replication (1 master and 1 slave) follow this guide: https://github.com/jayjanssen/Percona-Pacemaker-Resource-Agents/blob/master/doc/PRM-setup-guide.rst Here're the output of crm configure show: node serving-6192 \ attributes p_mysql_mysql_master_IP="192.168.6.192" node svr184R-638.localdomain \ attributes p_mysql_mysql_master_IP="192.168.6.38" primitive p_mysql ocf:percona:mysql \ params config="/etc/my.cnf" pid="/var/run/mysqld/mysqld.pid" socket="/var/lib/mysql/mysql.sock" replication_user="repl" replication_passwd="x" test_user="test_user" test_passwd="x" \ op monitor interval="5s" role="Master" OCF_CHECK_LEVEL="1" \ op monitor interval="2s" role="Slave" timeout="30s" OCF_CHECK_LEVEL="1" \ op start interval="0" timeout="120s" \ op stop interval="0" timeout="120s" primitive writer_vip ocf:heartbeat:IPaddr2 \ params ip="192.168.6.8" cidr_netmask="32" \ op monitor interval="10s" \ meta is-managed="true" ms ms_MySQL p_mysql \ meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true" globally-unique="false" target-role="Master" is-managed="true" colocation writer_vip_on_master inf: writer_vip ms_MySQL:Master order ms_MySQL_promote_before_vip inf: ms_MySQL:promote writer_vip:start property $id="cib-bootstrap-options" \ dc-version="1.0.12-unknown" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1341801689" property $id="mysql_replication" \ p_mysql_REPL_INFO="192.168.6.192|mysql-bin.000006|338" crm_mon: Last updated: Mon Jul 9 10:30:01 2012 Stack: openais Current DC: serving-6192 - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, 2 expected votes 2 Resources configured. ============ Online: [ serving-6192 svr184R-638.localdomain ] Master/Slave Set: ms_MySQL Masters: [ serving-6192 ] Slaves: [ svr184R-638.localdomain ] writer_vip (ocf::heartbeat:IPaddr2): Started serving-6192 Editing /etc/my.cnf on the serving-6192 of wrong syntax to test failover and it's working fine: svr184R-638.localdomain being promoted to become the master writer_vip switch to svr184R-638.localdomain Current state: Last updated: Mon Jul 9 10:35:57 2012 Stack: openais Current DC: serving-6192 - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, 2 expected votes 2 Resources configured. ============ Online: [ serving-6192 svr184R-638.localdomain ] Master/Slave Set: ms_MySQL Masters: [ svr184R-638.localdomain ] Stopped: [ p_mysql:0 ] writer_vip (ocf::heartbeat:IPaddr2): Started svr184R-638.localdomain Failed actions: p_mysql:0_monitor_5000 (node=serving-6192, call=15, rc=7, status=complete): not running p_mysql:0_demote_0 (node=serving-6192, call=22, rc=7, status=complete): not running p_mysql:0_start_0 (node=serving-6192, call=26, rc=-2, status=Timed Out): unknown exec error Remove the wrong syntax from /etc/my.cnf on serving-6192, and restart corosync, what I would like to see is serving-6192 was started as a new slave but it doesn't: Failed actions: p_mysql:0_start_0 (node=serving-6192, call=4, rc=1, status=complete): unknown error Here're snippet of the logs which I'm suspecting: Jul 09 10:46:32 serving-6192 lrmd: [7321]: info: rsc:p_mysql:0:4: start Jul 09 10:46:32 serving-6192 lrmd: [7321]: info: RA output: (p_mysql:0:start:stderr) Error performing operation: The object/attribute does not exist Jul 09 10:46:32 serving-6192 crm_attribute: [7420]: info: Invoked: /usr/sbin/crm_attribute -N serving-6192 -l reboot --name readable -v 0 The full logs: http://fpaste.org/AyOZ/ The strange thing is I can starting it manually: export OCF_ROOT=/usr/lib/ocf export OCF_RESKEY_config="/etc/my.cnf" export OCF_RESKEY_pid="/var/run/mysqld/mysqld.pid" export OCF_RESKEY_socket="/var/lib/mysql/mysql.sock" export OCF_RESKEY_replication_user="repl" export OCF_RESKEY_replication_passwd="x" export OCF_RESKEY_test_user="test_user" export OCF_RESKEY_test_passwd="x" sh -x /usr/lib/ocf/resource.d/percona/mysql start: http://fpaste.org/RVGh/ Did I make something wrong?

  Read the article

• Running Apache 2.2 as another user on Windows Server 2008 R2

  - by futureelite7

  Hi, I would like to run apache as a limited user on Windows 2008 R2 for security reasons. I've created a user in the user group (let's call it apache), and set the user to run as in the services pane, but then I am unable to start the service (probably not enough permission to bind to port 80). What is the minimum privileges needed to run apache on windows 2008, or what should I do to allow the user apache to bind apache 2.2 to port 80? Thanks!

  Read the article

• VM image including ready-to-use Kerberos server?

  - by Nicolas Raoul

  I implemented client-side Kerberos support to an open source software, and I want to test it. I don't have a Kerberos network at home and unfortunately don't have the skills/time to reliably set up one. Is there a Virtual Machine image that I could fire up, and that would include a properly working Kerberos environment, so that I can test my client app? (freely downloadable Linux/Microsoft/anything all acceptable)

  Read the article

• Git on DreamHost still balking on big files even after I compiled with NO_MMAP=1

  - by fuzzy lollipop

  I compiled Git 1.7.0.3 on DreamHost with the NO_MMAP=1 option, I also supplied that option when I did the "make NO_MMAP=1 install". I have my paths set up correctly, which git reports my ~/bin dir which is correct, git --version returns the correct version. But when I try to do a "git push origin master" with "big" files ~150MB it always fails. Does anyone have an suggestions on how to get DreamHost to accept this "big" files from a git push?

  Read the article

• ErrorDocument not working when accessing .htaccess

  - by oxguy3

  I've been setting up ErrorDocuments for a website I'm working, and generally they've been working. However, after I set the 403 ErrorDocument, I noticed that it didn't work when I tried to access the .htaccess file itself. When I access a different forbidden file, the Error Document appears just fine. How can I make the ErrorDocument work on the .htaccess file? If you didn't follow my explanation, here are links to show you what I mean: ErrorDocument works fine: http://keycraft.haydencity.net/.ftpquota ErrorDocument doesn't work: http://keycraft.haydencity.net/.htaccess

  Read the article

• RADIUS authentication on Cisco switches: how to assign privilege levels?

  - by Massimo

  I need to configure some Cisco switches (IOS 12.x) to authenticate against a RADIUS server; the server is Windows Server 2003's IAS, and it validates users against his Active Directory domain. I know how to configure the switches to validate usernames/passwords against the RADIUS server, and I can succesfully login using an AD account; the question is: how can I set privilege level 15 for users, in order to not have to use enable each time?

  Read the article

• After Effects Question

  - by Josh

  Question here, not sure if it's the correct stack exchange site, sorry if it isn't. I have an After Effects project for school, and I've created a movie using JPEG sequences (10 @ ~100-200mb/each ). I have the output setting on the composition set to 640x480. I resized each JPEG layer via the fit to comp tool, but when I export the movie as a Quicktime movie, it is 1.1 gig for ~35 seconds of movie at 30fps. What am I doing so horribly wrong here?

  Read the article

• How do I get SELinux to allow Apache and Samba on the same folder?

  - by Josh

  In the configuration I have setup I wish to allow samba and apache to access /var/www I am able to set a context to allow samba access, but then httpd doesn't have access. Using setenforce to 0 eliminates issues so I know that it is SELinux. In addition: How can I view the context of a folder, and can a folder have multiple contexts? (CentOS) Thank you, Josh

  Read the article

• Is Visual Studio Express Edition 2010 free?

  - by RyanTM

  Is Visual Studio Express Edition 2010 free? On this page: http://www.microsoft.com/express/Windows/ it says it is a set of free tools. But the splash screen at the start says it is only for evaluation purposes. And the about screen has a trial countdown timer counting down the days to when it presumably stops working.

  Read the article

• how to backup from opensuse 10.1 server to a new server with opensuse 12.1

  - by jarus

  Im a newbie for this , i want to copy all the files from my old server which is running opensuse 10.1 with a software raid 1 to a new server which has open suse 12.1 with a hardware raid 1 , i had set up a backup script on the old server which back's up all the folders into a zip file onto an external drive . Can i just get that zip file and copy it to the new server , will that work , it might be a basic and stupid question but i want to learn and do it right. Any help , tutorials, links or suggestions will be greatly appreciated Thanks in Advance

  Read the article

• Cpanel and add-on domains

  - by Ian

  I have a cpanel on my hosting and I have created a directory holding my new website. Is it possible to set the main domain (where the webpages are normally stored in the root) to a subfolder? I have done this with addon domains but im not sure how to do it with the main domain name. Thanks for the help. Ian

  Read the article

• Can I use excel to read barcodes and take me to a specific cell?

  - by Ben

  I work for a community group that holds an annual fund raiser for charity over a weekend. I am an excel user and am wanting to set it up so that I can assign a barcode on a card to a specific person. My hope is to be able to scan the barcode have it take me to a specific cell in the spread sheet so I can update the Commitment amount. and provide as much anonymity for our donors as possible. Can this even be done?

  Read the article

• DHCP server with multiple interfaces on ubuntu, destroys default gateway

  - by Henrik Kjus Alstad

  I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

  Read the article

< Previous Page | 902 903 904 905 906 907 908 909 910 911 912 913  | Next Page >