Search Results

Search found 55276 results on 2212 pages for 'eicar test string'.

Page 949/2212 | < Previous Page | 945 946 947 948 949 950 951 952 953 954 955 956  | Next Page >

• Strange ASP.NET Queue Performance Counters Behavior?

  - by LemurTech

  We have an ASP.NET 2.0 site running in classic mode. I am seeing very strange behavior in the performance counter values. Perhaps these are bugs (I've been all over Google trying to verify this, without much luck), or perhaps it is just my inexperience with monitoring these things. This PerfMon graph (http://imgur.com/Jv5io5J) represents a load test where I add up to 350 virtual users to the site, at a rate of about 1/sec, performing relatively simple page browsing. At the end of the test, I gradually taper off the number of users. This is a 4 CPU server. Machine.config settings for are at the defaults. The solid blue line is ASP.NET Apps v2.x\Requests Executing for the application in question. The profile makes perfect sense, with a quick ramp-up to 32 executing requests (minWorkerThreads x 4CPUs), followed by a slower ramp-up to 48 ((maxWorkerThreads - minWorkerThreads) x 4CPUs). The solid yellow line is ASP.NET v2.x\Requests Queued. Again, this makes sense: after the initial 32 request threads are activated, the queue begins to build as new thread initialization can't keep pace with incoming requests. But as executing requests reaches its highest possible value of 48, the counter for ASP.NET Apps v2.x\Requests Queued (green solid line) suddenly springs to life and maintains step with the yellow counter. As far as I can tell, and with no other apps running on the server, these two counters should have had the same values from the start. One other odd thing: The counter for ASP.NET v2.x\Request Wait Time (dotted yellow line) also does not spring to life until executing requests reaches 48. Shouldn't I be seeing values here from the moment ASP.NET v2.x\Requests Queued begins to build? And likewise, why would ASP.NET Apps v2.x\Request Execution Time (dotted blue) increase significantly only after that peak of 48 is reached? Shouldn't it ramp-up gradually along with queued requests?

  Read the article

• Why does "commit" appear in the mysql slow query log?

  - by Tom

  In our MySQL slow query logs I often see lines that just say "COMMIT". What causes a commit to take time? Another way to ask this question is: "How can I reproduce getting a slow commit; statement with some test queries?" From my investigation so far I have found that if there is a slow query within a transaction, then it is the slow query that gets output into the slow log, not the commit itself. Testing In mysql command line client: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=benchmark(9999999, md5('This is to slow down the update')) WHERE id = 21560; Query OK, 0 rows affected (2.32 sec) Rows matched: 1 Changed: 0 Warnings: 0 At this point (before the commit) the UPDATE is already in the slow log. mysql commit; Query OK, 0 rows affected (0.01 sec) The commit happens fast, it never appeared in the slow log. I also tried a UPDATE which changes a large amount of data but again it was the UPDATE that was slow not the COMMIT. However, I can reproduce a slow ROLLBACK that takes 46s and gets output to the slow log: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=CONCAT(myfield,'TEST'); Query OK, 481446 rows affected (53.31 sec) Rows matched: 481446 Changed: 481446 Warnings: 0 mysql rollback; Query OK, 0 rows affected (46.09 sec) I understand why rollback has a lot of work to do and therefore takes some time. But I'm still struggling to understand the COMMIT situation - i.e. why it might take a while.

  Read the article

• Powershell import-module webadministration

  - by David

  Every time I execute this command invoke-command -computername REMOTEPC -scriptblock { import-module WebAdministration; new-item "$env:systemdrive\inetpub\testsite" -type directory; New-WebSite -Name TestSite -Port 81 -PhysicalPath "$env:systemdrive\inetpub\testsite" } I get the following error Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING)) + CategoryInfo : NotSpecified: (:) [Get-ChildItem], COMException + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.PowerShell.Commands.GetChildItemCommand The website is created successfully as far as I can see. The following command gives the same error when enumerating the testsite Invoke-Command -computername REMOTEPC { import-module webadministration; dir -path IIS:\Sites\ } Name ID State Physical Path Bindings PSComputerName Default Web Site 1 Started http *:80: REMOTEPC Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING)) + CategoryInfo : NotSpecified: (:) [Get-ChildItem], COMException + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Microsoft.PowerShell.Commands.GetChildItemCo mmand Any suggestions would be appreciated

  Read the article

• CSS gradient not rendering in Windows Phone 8 WebBrowser Control

  - by SRSHawk

  I am facing an issue where, the CSS3 background is not rendered in WebBrowser control in Windows Phone 8. But same HTML when opened in WebBrowser in Windows Phone 8, it renders the gradient The HTML I am using is: <html> <head> <meta name="viewport" content="width=320, user-scalable=no, minimum-scale=1, maximum-scale=1"/> </head> <body style="margin:0px;overflow:hidden;"> <div id="im_c" style="height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);"> <div style="margin:0 auto;width:320px;"> Test </div> </div> <style> body {margin:0px} </style> </body> In Windows Phone 8, I use the HTML as below: WebBroswer WebView = new WebBrowser(); WebView.Height = 100; WebView.Width = 400; WebView.NavigateToString(@"<html><head><meta name=""viewport"" content=""width=320, user-scalable=no, minimum-scale=1, maximum-scale=1""/></head><body style=""margin:0px;overflow:hidden;""> <div id=""im_c"" style=""height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);""> <div style=""margin:0 auto;width:320px;"">Test</div></div> <style> body {margin:0px} </style> </body></html>"); In this case, the CSS gradient is not visible. Am I missing something?

  Read the article

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  Hello, I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• Nginx + uWSGI + Django performance stuck on 100rq/s

  - by dancio

  I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

  Read the article

• Munin email notification

  - by Prashanth

  I am trying to get munin to notify me via email. I have configured munin and it reports critical and warning values but no alerts are being sent neither is any script being called. Can you please help me out with this? I have included part of the munin.conf below # Drop [email protected] and [email protected] an email everytime # something changes (OK -> WARNING, CRITICAL -> OK, etc) #contact.someuser.command mail -s "Munin notification" [email protected]\ contact.prashanth.command echo "Munin notification" | sendmail -t [email protected] contact.prashanth.always_send warning critical contact.root.command echo "Munin notification" | sendmail -t [email protected] contact.root.always_send warning critical contact.pipevia.command | /home/prashanth/script.sh /home/prashanth/script.sh None of this works. What am i missing here and why are emails not being sent? Thanks in advance. here is the munin-limits.log 2011/09/26 14:58:12 Opened log file 2011/09/26 14:58:12 [INFO] Starting munin-limits, getting lock /var/run/munin/munin-limits.lock 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[3] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[15] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[1] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 722. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 725. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 740. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 754. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $a[0] in pattern match (m//) at /usr/share/perl5/Munin/Master/LimitsOld.pm line 759. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $text in length at /usr/share/perl5/Munin/Master/LimitsOld.pm line 774. 2011/09/26 14:58:12 [PERL WARNING] Use of uninitialized value $res[1] in join or string at /usr/share/perl5/Munin/Master/LimitsOld.pm line 777. 2011/09/26 14:58:12 Baz? 2011/09/26 14:58:12 [INFO] munin-limits finished (0.02 sec) 2011/09/26 14:58:12 Command "prashanth" stderr: Munin notification - this is a test mail from the user prashanth | sendmail -t [email protected]

  Read the article

• Eclipse Helios on OS X Snow Leopard crashes frequently when editing certain PHP files

  - by William

  I use Eclipse Helios (Eclipse Platform: 3.6.0.I20100608-0911, Eclipse IDE for PHP Developers: 1.3.0.20100617-0520) all the time on OS X (Snow Leopard), and it seems I only run into trouble whenever I'm editing a PHP file that's part of the WordPress blogging framework. When I move my cursor to a variable or function name, that often triggers the beach ball of death. I suspect Eclipse is trying to look up that variable/function and for some reason that causes an endless loop. Sometimes it's not just variables or functions. Just today I was trying to replace all occurrences of a quoted string. Every time I clicked "Replace All", the program would freeze immediately after the string was replaced and the text cursor was moved to the replaced position. I think the moving of the text cursor is important, because I got the same result when I searched for the string (thus moving the cursor), but NOT when I searched for a nonexistent string. I tried disabling everything in my preferences related to marked occurrences, hovering, code assistance, etc. Nothing helps. I use Eclipse for all my projects, and I find that it's only WordPress projects where this happens. Here's my eclipse.ini file: -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx_1.1.0.v20100503 -product org.eclipse.epp.package.php.product --launcher.defaultAction openFile -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Dosgi.requiredJavaVersion=1.5 -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -XX:PermSize=128m -XX:MaxPermSize=128m -XX:MaxGCPauseMillis=10 -XX:MaxHeapFreeRatio=70 -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:+CMSIncrementalPacing -XX:CompileThreshold=5 -Xms128m -Xmx512m -Xss2m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -framework ../../../plugins/org.eclipse.osgi.services_3.2.100.v20100503.jar I have 4GB of RAM, so I don't know if the problem is I'm underutilizing my resources. Here's what I see over and over in the error log: !ENTRY org.eclipse.jface 2 0 2011-01-16 16:26:21.533 !MESSAGE Keybinding conflicts occurred. They may interfere with normal accelerator operation. !SUBENTRY 1 org.eclipse.jface 2 0 2011-01-16 16:26:21.533 !MESSAGE A conflict occurred for ALT+COMMAND+Q P: Binding(ALT+COMMAND+Q P, ParameterizedCommand(Command(org.eclipse.ui.views.showView,Show View, Shows a particular view, Category(org.eclipse.ui.category.views,Views,Commands for opening views,true), org.eclipse.ui.handlers.ShowViewHandler@2a46d1, [Lorg.eclipse.ui.internal.commands.Parameter;@18f50c2,,true), [Lorg.eclipse.core.commands.Parameterization;@1ff1855), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,cocoa,system) Binding(ALT+COMMAND+Q P, ParameterizedCommand(Command(org.eclipse.ui.views.showView,Show View, Shows a particular view, Category(org.eclipse.ui.category.views,Views,Commands for opening views,true), org.eclipse.ui.handlers.ShowViewHandler@2a46d1, [Lorg.eclipse.ui.internal.commands.Parameter;@18f50c2,,true), [Lorg.eclipse.core.commands.Parameterization;@96b40c), org.eclipse.ui.defaultAcceleratorConfiguration, org.eclipse.ui.contexts.window,,cocoa,system) !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.217 !MESSAGE System property http.proxyHost has been set to 127.0.0.1 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.217 !MESSAGE System property http.proxyPort has been set to 8888 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.218 !MESSAGE System property https.proxyHost has been set to 127.0.0.1 by an external source. This value will be overwritten using the values from the preferences !ENTRY org.eclipse.core.net 1 0 2011-01-16 16:26:22.219 !MESSAGE System property https.proxyPort has been set to 8888 by an external source. This value will be overwritten using the values from the preferences I did some experimenting with the particular script that's giving me trouble. It's a hybrid of HTML and PHP, so Eclipse has to do both HTML and PHP validation. I wondered if the HTML validation had something to do with it, so I created a new file, copied the contents over, and messed with the doctype element. I found that if I replaced the well-formed XHTML 1.0 Strict doctype element with a generic doctype (as such: <!DOCTYPE html>), then I did not crash the program just by moving the cursor around. I set all HTML validation rules to "Ignore", but it still didn't solve my problems. For now, I'm just going to echo the doctype using PHP instead of entering it literally. That seems to prevent crashes. I notice that when I move the cursor around the document, Eclipse displays the "xpath" to my current location at the bottom of the screen. Sometimes there's a delay while it figures out my current path. Perhaps when it's validating against the Strict doctype, it has problems quickly calculating the xpath as I move the cursor around? Maybe it has a stack overflow that causes it to crash.

  Read the article

• Perl EPIC Not recognising installed CPAN modules

  - by Recc

  Eclipse on a mac, was working fine adding new modules until I Installed Text::CSV_XS which Eclips doesn't recognise as added to @INC For instance use strict; use SOAP::Transport::HTTP; SOAP::Transport::HTTP::CGI->dispatch_to('C2FService')->handle; BEGIN { package C2FService; use vars qw(@ISA); @ISA = qw(Exporter SOAP::Server::Parameters); use SOAP::Lite; sub c2f { my $self = shift; my $envelope = pop; my $temp = $envelope->dataof("//c2f/temperature"); return SOAP::Data->name( 'convertedTemp' => ( ( ( 9 / 5 ) * ( $temp->value ) ) + 32 ) ); } } use SOAP::Transport::HTTP; is marked as error if I comment it out use SOAP::Lite; is in turn marked as an error, not found etc the usual if a module is not installed. Both are installed with CPAN and $ perl -c soap-test.pl post-code-check.pl syntax OK Perl is fine CPAN tests are all pass, the code works, only EPIC lags behind. $ pwd && ls /opt/local/lib/perl5/site_perl/5.12.4/SOAP Client.pod Lite Server.pod Constants.pm Lite.pm Test.pm Data.pod Packager.pm Trace.pod Deserializer.pod SOM.pod Transport Fault.pod Schema.pod Transport.pod Header.pod Serializer.pod Utils.pod And if I have use errors in the start of my files the rest of the source is not error checked..

  Read the article

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

• PsExec and Remote Environment Variables, Logging, Etc.

  - by alharaka

  When I run PsExec on a remote computer, I always fall short of what I want. What I would like ideally in most situations is a) a log on an admin server where each individual log has the name of each the remote computer it was generated from (e.g. COMPNAME1.log, COMPNAME2.log, etc.) or b) a log file on each remote computer with whatever name I specify. When I try scenario (a), I use the following command. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username cmd /c echo TEST >> \\server.company.tld\share\%computername%.log Problem is that it never works. All the computers just write to the log where %computername% is just the computer I execute PsExec from in my office. What I want are unique logs for each computer specific in the listofcomputers.txt that will correctly use the hostname from the remote environment variable without issue. Is that even possible? It does not seem to work for me. I tried this, and the syntax is clearly wrong. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo TEST >> \\server.company.tld\share\%computername%.log" PsExec just fails saying the system file cannot be found (read: syntax fail). As for scenario (b), it appears to be a variation of a similar problem. When I run a command like this, it does not work. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo %computername% >> \\server.company.tld\share\aggregated.log" Is there something I do not understand about remote path and environment variables with PsExec on the cmd.exe console (I have not even tried the dreaded PowerShell yet). I know such things work in a batch file (cmd /c \\server.company.tld\share\runthis.bat), but is there a reason it will not work when executing commands as arguments? I always need this, and can never get it!

  Read the article

• Can't seem to get python to work

  - by Justin Johnson

  I'm just starting out in Python. The Python interpreter works from the command line (I have 2.4.3), but I can't seem to get Apache to execute Python scripts. All I end up with is a blank screen and nothing in the Apache error logs. I enabled Python via the Plesk control panel. Here's the snippet that was generated in the httpd.include: <Files ~ (\.py$)> SetHandler python-program PythonHandler mod_python.cgihandler </Files> My test script is one of the examples that comes with the Python downloads at http://python.org/download/ #!/usr/local/bin/python """CGI test 1 - check server setup.""" # Until you get this to work, your web server isn't set up right or # your Python isn't set up right. # If cgi0.sh works but cgi1.py doesn't, check the #! line and the file # permissions. The docs for the cgi.py module have debugging tips. print("Content-type: text/html") print() print("<h1>Hello world</h1>") print("<p>This is cgi1.py") That wasn't working, so I changed #!/usr/local/bin/python to #!/usr/bin/python which is what which python tells me but the results were the same. Like I said, I'm ending up with a blank page. No errors that I know of, unless I'm checking the wrong error log (I'm checking the Apache error log). I'm on a MediaTemple (dv) running CentOS.

  Read the article

• Replace an IP address with it's whois using bash

  - by user2099762

  I have a traffic log similar to this "page visited" for xxx.xxx.xxx.xxx at 2013-10-30 and I would like to replace the ip address with the result of it's whois lookup. I can export the ip addresses to a separate file and then do a whois on each line, but im struggling to combine them all together. Ideally i'd like to replace the ip address in the same string and print the new string to a new file. So it would look like "page visited" for example.com at 2013-10-30 Can anyone help Here's what I have so far grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}' clean_cites.txt > iplist.txt for i in `cat iplist.txt` do OUTPUT=$(geoiplookup -f /usr/share/GeoIP/GeoIPOrg.dat $i) echo $i,$OUTPUT >> visited.txt done Like I said,this produces a separate file with a list of ip addresses and their relevant hostnames, so I either need to search for the ip address in file and and replace it with the text in file b (which will give the ip address and hostname) or replace the ip address in place. Thanks

  Read the article

• Emails sent to outlook.com not being delivered

  - by imukcedup

  I'm having an issue that is a little strange. I have a cPanel webserver that I own and have root. I was testing out emailing and noticed some issues. When I send an email to outlook.com address the email sends ok but nothing is recieved at the outlook mailbox. I also dont get an 'email delivery failure notification' in any mailbox. 2014-06-12 09:53:47 SMTP connection from [127.0.0.1]:45334 (TCP/IP connection count = 1) 2014-06-12 09:53:47 1Wv5Rr-0003rA-2K <= [email protected] H=localhost (ourdomain.com) [127.0.0.1]:45334 P=esmtpa A=dovecot_login:joe S=667 [email protected] T="This is a test message" for [email protected] 2014-06-12 09:53:47 SMTP connection from localhost (ourdomain.com) [127.0.0.1]:45334 closed by QUIT 2014-06-12 09:53:50 cwd=/var/spool/MailScanner/incoming/1029481 5 args: /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Wv5Rr-0003rA-2K 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K SMTP connection outbound 1402581230 1Wv5Rr-0003rA-2K ourdomain.com [email protected] 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K => Test Account <[email protected]> R=archive_outgoing_email T=archiver_outgoing 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K => [email protected] R=dkim_lookuphost T=dkim_remote_smtp H=mx1.hotmail.com [65.54.188.110] X=UNKNOWN:AES128-SHA256:128 C="250 <[email protected]> Queued mail for delivery" 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K Completed I have checked the outlook.com's spam folders and its not in there either. This is a new IP address allocation from our ISP and there was a block on gmail addresses, so we know it was used for spam. But with gmail we got a notifaction of failure and I know outlook/microsoft also send out notification. Does anyone know what could be happening here? Thanks

  Read the article

• libstdc++ - compiling failing because of tr1/regex

  - by Radek Šimko

  I have these packages installed on my OpenSUSE 11.3: i | libstdc++45 | Standard shared library for C++ | package i | libstdc++45-devel | Contains files and libraries for development | package But when i'm trying to compile this C++ code: #include <stdio.h> #include <tr1/regex> using namespace std; int main() { int test[2]; const tr1::regex pattern(".*"); test[0] = 1; if (tr1::regex_match("anything", pattern) == false) { printf("Pattern does not match.\n"); } return 0; } using g++ -pedantic -g -O1 -o ./main.o ./main.cpp It outputs this errors: ./main.cpp: In function ‘int main()’: ./main.cpp:13:43: error: ‘printf’ was not declared in this scope radek@mypc:~> nano main.cpp radek@mypc:~> g++ -pedantic -g -O1 -o ./main.o ./main.cpp /tmp/cc0g3GUE.o: In function `basic_regex': /usr/include/c++/4.5/tr1_impl/regex:771: undefined reference to `std::tr1::basic_regex<char, std::tr1::regex_traits<char> >::_M_compile()' /tmp/cc0g3GUE.o: In function `bool std::tr1::regex_match<char const*, char, std::tr1::regex_traits<char> >(char const*, char const*, std::tr1::basic_regex<char, std::tr1::regex_traits<char> > const&, std::bitset<11u>)': /usr/include/c++/4.5/tr1_impl/regex:2144: undefined reference to `bool std::tr1::regex_match<char const*, std::allocator<std::tr1::sub_match<char const*> >, char, std::tr1::regex_traits<char> >(char const*, char const*, std::tr1::match_results<char const*, std::allocator<std::tr1::sub_match<char const*> > >&, std::tr1::basic_regex<char, std::tr1::regex_traits<char> > const&, std::bitset<11u>)' collect2: ld returned 1 exit status What packages should i (un)install to make the code work on my PC?

  Read the article

• Linux Scheduler (not using all cores on multi-core machine) RHEL6

  - by User512

  I'm seeing strange behavior on one of my servers (running RHEL 6). There seems to be something wrong with the scheduler. Here's the test program I'm using: #include <stdio.h> #include <unistd.h> #include <stdlib.h> void RunClient(int i) { printf("Starting client %d\n", i); while (true) { } } int main(int argc, char** argv) { for (int i = 0; i < 4; ++i) { pid_t p_id = fork(); if (p_id == -1) { perror("fork"); } else if (p_id == 0) { RunClient(i); exit(0); } } return 0; } This machine has a lot more than 4 cores so we'd expect all processes to be running at 100%. When I check on top, the cpu usage varies. Sometimes it's split (100%, 33%, 33%, 33%), other times it's split (100%, 100%, 50%, 50%). When I try this test on another server of ours (running RHEL 5), there are no issues (it's 100%, 100%, 100%, 100%) as expected. What's causing this and how can I fix it? Thanks

  Read the article

• max length of url 257 characters for mod_rewrite?

  - by Daniel

  My url scheme is /foo/var1-var2-var3.../bar I am using these mod_rewrite rules: RewriteBase /foo/ RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^ index.php [PT,L] If the length of the string 'var1-var2...' is greater than 257 characters then an error 403 Forbidden and a 404 are returned. However, if the length of the 'var1-var2...' string is 257 characters or less and subsequently followed by a slash the length of the remaining url may be any length. How does one overcome this limit?

  Read the article

• Where to store short strings (with my key) on the internet?

  - by Vi

  Is there simple service to store strings under my key that can be used by bots? Requirements: Simple command line access, automatic posting allowed No need to keep some session with the service alive I choose the key (so pastebins fail) No requirement for registration/authentication (for simplicity) The string should be kept for about a month. I want something like: Store: $ echo some_data_0x1299C0FF | store_my_string testtest2011 Retrieve: $ retrive_my_string testtest2011 some_data_0x1299C0FF Do you have ideas what should I use for it? I can only think of using IRC somehow (channel topics, /whowas, ...), but this is too complex for this simple task. No security is needed: anyone can update my string. The task looks very simple, so I expect the solution to be similarly simple. Expecting something like single simple curl call.

  Read the article

• LM Sensors always returning same (invalid) value for one temp sensor

  - by pkaeding

  I am trying to monitor the temp sensors on a server, and plot them using Cacti. I have lm-sensors installed and working correctly. For example, here is the output from sensors: % sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8 C (crit = +100.0 C) temp2: +32.0 C (crit = +60.0 C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0 C (high = +105.0 C, crit = +105.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +42.0 C (high = +105.0 C, crit = +105.0 C) However, when I try to get this data via SNMP, I get only one sensor's temperature correctly, and another one always returns 100.000 C: % snmpwalk -Os -c public -v 1 10.8.0.18 -m ALL lmTempSensors lmTempSensorsIndex.1 = INTEGER: 0 lmTempSensorsIndex.2 = INTEGER: 1 lmTempSensorsDevice.1 = STRING: temp1 lmTempSensorsDevice.2 = STRING: temp1 lmTempSensorsValue.1 = Gauge32: 26800 lmTempSensorsValue.2 = Gauge32: 100000 So, my question is two-fold: Why is the second sensor that is returned by SNMP giving a value of 100 C (when it should be 32 C) Why are my CPU core sensors not being returned by SNMP?

  Read the article

• Trying to setup catchall mail forwarding on my rackspace's cloudspace server

  - by bob_cobb

  I'm running Ubuntu 12 Precise Pangolin and am trying to configure my server to catchall mail sent to it and forward it to my gmail address. I've been trying lots of examples online like editing my main.cf file which looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = destiny alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = destiny, localhost.localdomain, localhost relayhost = smtp.sendgrid.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 51200000 recipient_delimiter = + inet_interfaces = all inet_protocols = all In my /etc/postfix/virtual I have: @mydomain.com [email protected] @myotherdomain.com [email protected] Which isn't working when I email [email protected] or [email protected]. So I got the recommendation to add the following to my /etc/alias: postmaster:root root:[email protected] restarted postfix, and tried emailing [email protected] or [email protected] but it still won't send. Does anyone have any idea what I'm doing wrong here? I'd appreciate any help.

  Read the article

• The RTL8111/8168B NIC under Linux and the r8168 driver

  - by nik

  So I've got one of the infamous R8168 Realtek ethernet NIC, which have some problems under Linux. After some research, I found out I had to use the r8168 driver for this card (and not the r8169 which still loads when nothing else is available), which I did. So now everything works fine... Sort of. My download and upload rates are more than halved compared to what I should get. When I test (with eg. speedtest) I get something like 20M (often 15M) in download and 30M in upload, but if I test under Windows (everything is otherwise identical: same ethernet cable, same connection, at the same time of the day (well 5 min apart)...), I get 50M upload/download (which is what I expect). Where can it come from? Here's some info: ~ # lspci [...] 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) ~ # modinfo r8168 filename: /lib/modules/3.2.1-gentoo-r2/net/r8168.ko version: 8.027.00-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <[email protected]> srcversion: 0A6E9F1D4E8E51DE4B6BEE3 alias: pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* alias: pci:v000010ECd00008168sv*sd*bc*sc*i* depends: vermagic: 3.2.1-gentoo-r2 SMP mod_unload [...] ~ # mii-tool -v eth0: negotiated 100baseTx-HD, link ok product info: vendor 00:07:32, model 17 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• Bash preexecute

  - by Alex_Bender

  I'm trying to write bash command wrapper, which will be patch bash current command on the fly. But i'm faced with the problem. As i'm not a good Shell user, i can't write right expression of variable assignment in string. See bellow: I'm set trap to preexecute, through this: alex@bender:~$ trap "caller >/dev/null || xxx \"\${BASH_COMMAND}"\" DEBUG; I want change variable BASH_COMMAND, do something like BASH_COMMAND=xxx ${BASH_COMMAND} but i don't know, how i need escaping variables in this string NOTE: xxx -- my custom function, which must return some value, if in end of command situated word teststr function xxx(){ # find by grep, if teststr in the end `echo "$1" | grep "teststr$" >/dev/null`; # if true ==> do if [ "$?" == "0" ]; then # cut last 6 chars (len('teststr')==6) var=`echo "$1" | sed 's/......$//'`; echo "$var"; fi } How can i do this stuff?: alex@bender:~$ trap "caller >/dev/null || ${BASH_COMMAND}=`xxx $BASH_COMMAND`" DEBUG;

  Read the article

• Liferay - Verify each node in a cluster

  - by Schrute

  In this example, I have two clustered instances of Liferay using bundled Tomcat running, using cluster link and shared documents. Let's say the name of the public community is fubar and friendy URL used is fubar.lipsum.com. Let's say the ports listening on each server is 8080. If I go to both server1:8080 or server2:8080 I will get the default page for Liferay. How can I test fubar.lipsum.com on each node by using the backend server, so I can verify each server? If I test it, it just goes to the load balancer, I wish there was a way to append to the backend connection to bring it up. I can add the friendly URL to my local machines hosts file and this seems to kinda work, but then once something is called in the application, it tries to go out again from the backend server and then uses SSL and then we have problems. I think I may be able to do port forwarding, but this seems like a basic thing we should be able to do and what I've found so far in the admin docs has not helped. Using the option to print the server name in the page details isn't an option either.

  Read the article

• How to Reinstalling MSSQL Server 2008 with SP1? (Windows 7)

  - by n10i

  I am using Windows 7 Ultimate x64. I had earlier installed SQL server 2008 with SP1 with Visual Studio 2008 Team System with sp1. Now that VS2010 is out I wanted to install it so I uninstalled visual studio then MSSLQ Server 2008 SP1 and then SQL Server 2008 as suggested here: h**p://mark.michaelis.net/Blog/SQLServer2008InstallNightmare.aspx But now when I try to reinstall it I am unable to get it right I am getting the ERROR: “Attempted to perform an unauthorized operation.” (Following is part of the log file): 2010-04-16 04:54:57 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;CI;KR;;;S-1-5-21-2213424280-2581054173-1939225444-1027) 2010-04-16 04:54:57 Slp: Prompting user if they want to retry this action due to the following failure: 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 04:54:57 Slp: The following is an exception stack listing the exceptions in outermost to innermost order 2010-04-16 04:54:57 Slp: Inner exceptions are being indented 2010-04-16 04:54:57 Slp: 2010-04-16 04:54:57 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Data: 2010-04-16 04:54:57 Slp: WatsonData = Microsoft SQL Server 2010-04-16 04:54:57 Slp: DisableRetry = true 2010-04-16 04:54:57 Slp: Inner exception type: System.UnauthorizedAccessException 2010-04-16 04:54:57 Slp: Message: 2010-04-16 04:54:57 Slp: Attempted to perform an unauthorized operation. 2010-04-16 04:54:57 Slp: Stack: 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd) 2010-04-16 04:54:57 Slp: at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key) 2010-04-16 04:54:57 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite) 2010-04-16 04:54:57 Slp: ---------------------------------------- 2010-04-16 10:37:19 Slp: User has chosen to cancel this action 2010-04-16 10:37:19 Slp: Watson Bucket 2 Original Parameter Values 2010-04-16 10:37:19 Slp: Parameter 0 : SQL2008@RTM@ 2010-04-16 10:37:19 Slp: Parameter 2 : System.Security.AccessControl.Win32.GetSecurityInfo 2010-04-16 10:37:19 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.Sco.ScoException@1211@1 2010-04-16 10:37:19 Slp: Parameter 4 : System.UnauthorizedAccessException@-2147024891 2010-04-16 10:37:19 Slp: Parameter 5 : SqlBrowserConfigAction_install_ConfigNonRC 2010-04-16 10:37:19 Slp: Parameter 7 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Parameter 8 : Microsoft SQL Server 2010-04-16 10:37:19 Slp: Final Parameter Values I have googled around for the error given error but all I could find is to regedit and reset permissions on certain reg keys but I don’t see any reg keys with access problem in the log file the log file can be download here: http://www.mediafire.com/?dznizytjznn. Please guys help me out here I am a developer and I cannot afford an OS reinstallation! Thanks in advance…

  Read the article

• Ubuntu: how to get audio to work in both Spotify (under Wine) and Flash (in Firefox)?

  - by Jonik

  I'm running Spotify on Linux using Wine. Sound worked great (even though the sound test in winecfg failed!), until I installed alsa-oss package yesterday to get Flash sound working in Firefox. Now Spotify says: "There is a problem with your sound card. Spotify can't play music." So the question is, how to get the sound in Spotify working again, so that it also keeps working in Flash & Firefox? Tweak some ALSA settings? Spotify settings? Add/remove some packages? By the way, curiously, now that sound doesn't work in Spotify, winecfg's "Test Sound" does work! This is Ubuntu 8.04 (Hardy). Sound card / driver is probably an integrated AC'97. Please mention if any additional information about the system is needed! Update: I have Flash 10 installed (outside the packaging system, using $MOZ_PLUGIN_PATH env variable), but also had Flash 9 from flashplugin-nonfree package - and the earlier version was being used by Firefox! Based on what Mike Arthur said about Flash and alsa-oss, I removed the older Flash (flashplugin-nonfree package) and alsa-oss - and Flash sound still works, which is nice. But for some reason Spotify still doesn't play sound, even though things should now be like they were originally... Update 2: Got it working, all smoothly, finally.

  Read the article

< Previous Page | 945 946 947 948 949 950 951 952 953 954 955 956  | Next Page >