Search Results

Search found 25727 results on 1030 pages for 'solution'.

Page 983/1030 | < Previous Page | 979 980 981 982 983 984 985 986 987 988 989 990  | Next Page >

• How can I automatically update Flash Player whenever a new version is released? [closed]

  - by user219950

  Summary: Flash Player Update Service doesn't run on a reliable schedule, and doesn't automatically download and apply updates when it does run. Given the importance of having an up-to-date version of Flash Player installed (for those of us who don't use Chrome with its built-in player), I would like to find a way to ensure that new updates are promptly detected and installed. What follows are the details of my efforts to solve this problem on my own... Appendix A: Flash Player Update Service OK, way back in Flash Player 11.2 (or so?) Adobe added the Flash Player Update Service (FlashPlayerUpdateService.exe), it was supposed to keep the Flash Player updated... Upon installation, FPUS is configured to run as a Windows Service, with Start Type set to Manual. A Scheduled Task (Adobe Flash Player Updater.job) is added to start this service every hour. So far, so good - this set-up avoids having a constantly-running service, but makes sure that the checks are run often enough to catch any updates quickly. Google's software updater is configured in a similar fashion, and that works just fine... ...And yet, when I checked the version of my installed Flash Player, I found it was 11.6.602.180, which, based on looking at the timestamps of the files in C:\Windows\System32\Macromed\Flash was last updated (or installed) on Tue, Mar 12, 2013 --- 3/12/13, 5:00:08pm. I made this observation on Thu, Apr 25, 2013 --- 4/25/13, 7:00:00pm, and upon checking Adobe's website found that the current version of Flash Player was 11.7.700.169. That's over a month since the last update, with a new one clearly available on the website but with no indication that the hourly check running on my machine has noticed it or has any intention of downloading it. Appendix B: running the Flash Player updater manually Once upon a time, running FlashUtil32_<version_Plugin.exe -update plugin would give you a window with an Install button; pressing it would download the installer for the current version (automatically, without opening a browser) and run it, then you'd click thru that installer & be done. It was manual, but it worked! Finding my current installation out of date (see Appendix A), I first tried this manual update process. However... Running FlashUtil32_<version_ActiveX.exe -update activex (in my case, that's FlashUtil32_11_6_602_180_ActiveX.exe -update activex) ...only presents a window with a Download button, clicking that Download button opens my browser to the URL https://get3.adobe.com/flashplayer/update/activex. Running FlashUtil32_<version_Plugin.exe -update plugin (in my case, that's FlashUtil32_11_6_602_180_Plugin.exe -update plugin) ...only presents a window with a Download button, clicking that Download button opens my browser to the URL https://get3.adobe.com/flashplayer/update/plugin. I could continue with the Download page it sent me to, uncheck the foistware box ("Free! McAfee Security Scan Plus"), download that installer (ActiveX, no foistware: install_flashplayer11x32axau_mssd_aih.exe, Plugin, no foistware: install_flashplayer11x32au_mssd_aih.exe) & probably have an updated Flash...but then, what is the point of the Flash Player Update Service if I have to manually download & run another exe? Epilogue I've since come to suspect that the update service is intentionally hobbled to drive early adopters to the manual download page. If this is true, there's probably no solution to this short of writing my own updater; hopefully I am wrong.

  Read the article

• Windows 7 Boot to VHD using a VHD clone of the system drive

  - by daveh551

  This seems like a not too difficult problem, and, after several hurdles, I'm maddeningly close. But I can't quite get there. I'm running Windows 7 in development shop. I want to start using VS2010 to work on some stuff that won't be released for awhile. My boss said no beta code on the production machine, but I could run VS2010 for this project IF I could do it in an isolated environment, like a virtual PC. Well, I've used the beta and RC of Win7 on VPC's before, and it was painfully slow because of the VPC environment. But everyone has been singing the praises of Windows 7's boot-to-VHD capability, where only the disk is virtualized, and you're actually running on the hardware. Supposed to be little slower, but nowhere near the speed penalty of VPC. I've spent a fair amount of time getting everything installed the way I want it. So I figured, I'll just clone my system drive using Disk2VHD, and boot off of that, and then install VS2010 onto that. (I keep most of my user data, including all my projects, in a separate partition, so that wouldn't have to be duplicated and would still be available.) Well, I had some difficulties with that, owing mainly to the fact that I was using an old version of Disk2VHD - (get the latest if you're going to try it.) But I did finally get it to boot. (Scott Hanselman has a good blog post on boot to VHD). But it wasn't exactly what I was expecting or hoping for. What I expected was that the VHD would become the C: drive, and the original (physical) C: drive would be either hidden or mounted under a different letter, and thus isolated and protected from any changes. What you actually get is that the VHD becomes the D: drive AND you boot from the D: drive, BUT your original C: drive is still there. Which is sort of okay EXCEPT that the Registry on the VHD is a clone of the Registry on C: drive, and includes many hard-coded references to C:. So the result is that some things come from (and modify) D: (the VHD), but some things come from (and modify) C:. (If you open a cmd prompt and do a SET to look at your environment variables, you will see a mixture of D:\ and C:\ paths.) So I don't really have an isolated environment. Most importantly, %ProgramFiles% is still set to C:\Program Files. What I really need is a tool that can access the registry files on the mounted VHD AS FILES, not as registry entries, and do a global search and replace on all the C:\ in strings to D:. I haven't found such a program. (I've tried to do it with a program called Registry Replace, but, even when running as Administrator, there are certain entries that the Registry won't let you change.) Does anyone know of one? Or any other solution to my problem (other than starting from scratch with a clean VHD and installing Win7 and all my programs on it.)?

  Read the article

• Is there really a need for encryption to have true wireless security? [closed]

  - by Cawas

  I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. That's the question, but I think it may need more elaborating on. If you don't think so, please feel free to skip the next (long) part. Elaborating more on the two aspects ... I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. But the cabling without encryption is also insecure. If someone plugin all the data is right there. So, while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. It's wasting resources for too little gain. I believe we should encrypt only sensitive data regardless of wires. That's already done with HTTPS, so I don't really need to encrypt my torrents, for instance. They're torrents, they are meant to be freely shared! As for using passwords, they should be added to the users, always. Not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where we actually use passwords on our OS users, so let's go with that in mind. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. But it's lacking the second aspect. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think?

  Read the article

• Cannot turn on "Network Discovery and File Sharing" when Windows Firewall is enabled

  - by Cheeso

  I have a problem similar to this one. Windows Firewall prevents File and Printer sharing from working and Why does File and Printer Sharing keep turning off in Windows 7? I cannot turn on Network Discovery. This is Windows 7 Home Premium, x64. It's a Dell XPS 1340 and Windows came installed from the OEM. This used to work. Now it doesn't. I don't know what has changed. In windows Explorer, the UI looks like this: When I click the yellow panel that says "Click to change...", the panel disappears, then immediately reappears, with exactly the same text. If I go through the control panel "Network and Sharing Center" thing, the UI looks like this: If I tick the box to "turn on network discovery", the "Save Changes" button becomes enabled. If I then click that button, the dialog box just closes, with no message or confirmation. Re-opening the same dialog box shows that Network Discovery has not been turned on. If I turn off Windows Firewall, I can then turn on Network Discovery via either method. The machine is connected to a wireless home network, via a router. The network is marked as "Home Network" in the Network and Sharing Center, which I think corresponds to the "Private" profile in Windows Firewall Advanced Settings app. (Confirm?) The PC is not part of a domain, and has never been part of a domain. The machine is not bridging any networks. There is a regular 100baseT connector but I have the network adapter for that disabled in Windows. Something else that seems odd. Within Windows Firewall Advanced Settings, there are no predefined rules available. If I click the "New Rule...." Action on the action pane, the "Predefined" option is greyed out. like this: In order to attempt to allow the network discovery protocols through on the private network, I hand-coded a bunch of rules, intending to allow the necessary UPnP and WDP protocols supporting network discovery. I copied them from a working Windows 7 Ultimate PC, running on the same network. This did not work. Even with the hand-coded rules, I still cannot turn on Network Discovery. I looked on the interwebs, and the only solution that appears to work is a re-install of Windows. Seriously? If I try netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes ...it says "No rules match the specified criteria" EDIT: by the way, these services are running. DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Host in any case, since it works with no firewall, I would assume all necessary services are present and running. The issue is a firewall thing, but I don't know how to diagnose further, or fix it. Q1: Is there a way to definitively insure the correct holes are punched through the Windows Firewall to allow Network Discovery to function? Q2: Should I expect the "predefined" firewall rules to be greyed out? Q3: Why did this change?

  Read the article

• nginx: How can I set proxy_* directives only for matching URIs?

  - by Artem Russakovskii

  I've been at this for hours and I can't figure out a clean solution. Basically, I have an nginx proxy setup, which works really well, but I'd like to handle a few urls more manually. Specifically, there are 2-3 locations for which I'd like to set proxy_ignore_headers to Set-Cookie to force nginx to cache them (nginx doesn't cache responses with Set-Cookie as per http://wiki.nginx.org/HttpProxyModule#proxy_ignore_headers). So for these locations, all I'd like to do is set proxy_ignore_headers Set-Cookie; I've tried everything I could think of outside of setting up and duplicating every config value, but nothing works. I tried: Nesting location directives, hoping the inner location which matches on my files would just set this value and inherit the rest, but that wasn't the case - it seemed to ignore anything set in the outer location, most notably proxy_pass and I end up with a 404). Specifying the proxy_cache_valid directive in an if block that matches on $request_uri, but nginx complains that it's not allowed ("proxy_cache_valid" directive is not allowed here). Specifying a variable equal to "Set-Cookie" in an if block, and then trying to set proxy_cache_valid to that variable later, but nginx isn't allowing variables for this case and throws up. It should be so simple - modifying/appending a single directive for some requests, and yet I haven't been able to make nginx do that. What am I missing here? Is there at least a way to wrap common directives in a reusable block and have multiple location blocks refer to it, after adding their own unique bits? Thank you. Just for reference, the main location / block is included below, together with my failed proxy_ignore_headers directive for a specific URI. location / { # Setup var defaults set $no_cache ""; # If non GET/HEAD, don't cache & mark user as uncacheable for 1 second via cookie if ($request_method !~ ^(GET|HEAD)$) { set $no_cache "1"; } if ($http_user_agent ~* '(iphone|ipod|ipad|aspen|incognito|webmate|android|dream|cupcake|froyo|blackberry|webos|s8000|bada)') { set $mobile_request '1'; set $no_cache "1"; } # feed crawlers, don't want these to get stuck with a cached version, especially if it caches a 302 back to themselves (infinite loop) if ($http_user_agent ~* '(FeedBurner|FeedValidator|MediafedMetrics)') { set $no_cache "1"; } # Drop no cache cookie if need be # (for some reason, add_header fails if included in prior if-block) if ($no_cache = "1") { add_header Set-Cookie "_mcnc=1; Max-Age=17; Path=/"; add_header X-Microcachable "0"; } # Bypass cache if no-cache cookie is set, these are absolutely critical for Wordpress installations that don't use JS comments if ($http_cookie ~* "(_mcnc|comment_author_|wordpress_(?!test_cookie)|wp-postpass_)") { set $no_cache "1"; } if ($request_uri ~* wpsf-(img|js)\.php) { proxy_ignore_headers Set-Cookie; } # Bypass cache if flag is set proxy_no_cache $no_cache; proxy_cache_bypass $no_cache; # under no circumstances should there ever be a retry of a POST request, or any other request for that matter proxy_next_upstream off; proxy_read_timeout 86400s; # Point nginx to the real app/web server proxy_pass http://localhost; # Set cache zone proxy_cache microcache; # Set cache key to include identifying components proxy_cache_key $scheme$host$request_method$request_uri$mobile_request; # Only cache valid HTTP 200 responses for this long proxy_cache_valid 200 15s; #proxy_cache_min_uses 3; # Serve from cache if currently refreshing proxy_cache_use_stale updating timeout; # Send appropriate headers through proxy_set_header Host $host; # no need for this proxy_set_header X-Real-IP $remote_addr; # no need for this proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; # Set files larger than 1M to stream rather than cache proxy_max_temp_file_size 1M; access_log /var/log/nginx/androidpolice-microcache.log custom; }

  Read the article

• vim-powerline colors are out of whack in urxvt

  - by komidore64

  I have attached two images showing what my vim-powerline looks like. As you can see, something has happened to the colors and I cannot figure out how to fix it. I'm running Fedora 17 on a clean install with i3 (default config) and urxvt. Here is my bashrc: # .bashrc if [[ "$(uname)" != "Darwin" ]]; then # non mac os x # source global bashrc if [[ -f "/etc/bashrc" ]]; then . /etc/bashrc fi export TERM='xterm-256color' # probably shouldn't do this fi # bash prompt with colors # [ <user>@<hostname> <working directory> {current git branch (if you're in a repo)} ] # ==> PS1="\[\e[1;33m\][ \u\[\e[1;37m\]@\[\e[1;32m\]\h\[\e[1;33m\] \W\$(git branch 2> /dev/null | grep -e '\* ' | sed 's/^..\(.*\)/ {\[\e[1;36m\]\1\[\e[1;33m\]}/') ]\[\e[0m\]\n==> " # execute only in Mac OS X if [[ "$(uname)" == 'Darwin' ]]; then # if OS X has a $HOME/bin folder, then add it to PATH if [[ -d "$HOME/bin" ]]; then export PATH="$PATH:$HOME/bin" fi alias ls='ls -G' # ls with colors fi alias ll='ls -lah' # long listing of all files with human readable file sizes alias tree='tree -C' # turns on coloring for tree command alias mkdir='mkdir -p' # create parent directories as needed alias vim='vim -p' # if more than one file, open files in tabs export EDITOR='vim' # super-secret work stuff if [[ -f "$HOME/.workbashrc" ]]; then . $HOME/.workbashrc fi # Add RVM to PATH for scripting if [[ -d "$HOME/.rvm/bin" ]]; then # if installed PATH=$PATH:$HOME/.rvm/bin fi and my Xdefaults: ! URxvt config ! colors! URxvt.background: #101010 URxvt.foreground: #ededed URxvt.cursorColor: #666666 URxvt.color0: #2E3436 URxvt.color8: #555753 URxvt.color1: #993C3C URxvt.color9: #BF4141 URxvt.color2: #3C993C URxvt.color10: #41BF41 URxvt.color3: #99993C URxvt.color11: #BFBF41 URxvt.color4: #3C6199 URxvt.color12: #4174FB URxvt.color5: #993C99 URxvt.color13: #BF41BF URxvt.color6: #3C9999 URxvt.color14: #41BFBF URxvt.color7: #D3D7CF URxvt.color15: #E3E3E3 ! options URxvt*loginShell: true URxvt*font: xft:DejaVu Sans Mono for Powerline:antialias=true:size=12 URxvt*saveLines: 8192 URxvt*scrollstyle: plain URxvt*scrollBar_right: true URxvt*scrollTtyOutput: true URxvt*scrollTtyKeypress: true URxvt*urlLauncher: google-chrome and finally my vimrc set nocompatible set dir=~/.vim/ " set one place for vim swap files " vundler for vim plugins ---- filetype off set rtp+=~/.vim/bundle/vundle call vundle#rc() Bundle 'gmarik/vundle' Bundle 'tpope/vim-surround' Bundle 'greyblake/vim-preview' Bundle 'Lokaltog/vim-powerline' Bundle 'tpope/vim-endwise' Bundle 'kien/ctrlp.vim' " ---------------------------- syntax enable filetype plugin indent on " Powerline ------------------ set noshowmode set laststatus=2 let g:Powerline_symbols = 'fancy' " show fancy symbols (requires patched font) set encoding=utf-8 " ---------------------------- " ctrlp ---------------------- let g:ctrlp_open_multiple_files = 'tj' " open multiple files in additional tabs let g:ctrlp_show_hidden = 1 " include dotfiles and dotdirs in ctrlp indexing let g:ctrlp_prompt_mappings = { \ 'AcceptSelection("e")': ['<c-t>'], \ 'AcceptSelection("t")': ['<cr>', '<2-LeftMouse>'], \ } " remap <cr> to open file in a new tab " ---------------------------- set showcmd set tabpagemax=100 set hlsearch set incsearch set nowrapscan set ignorecase set smartcase set ruler set tabstop=4 set shiftwidth=4 set expandtab set wildmode=list:longest autocmd BufWritePre * :%s/\s\+$//e "remove trailing whitespace " :REV to "revert" file to state of the most recent save command REV earlier 1f " disable netrw -------------- let g:loaded_netrw = 1 let g:loaded_netrwPlugin = 1 " ---------------------------- Any guidance as to fixing the statusline would be fantastic. I've found a github issue outlining almost the exact same problem, but the solution was never posted. Thank you.

  Read the article

• How do I determine if my controller is in IDE or AHCI mode in Linux?

  - by philcolbourn

  I have an old MacBook Pro 4,1 (early 2008) - but I suspect an answer would apply to many MacBook Pros. It has an Intel IDE/SATA controller (ICH8M/ICH8M-E). I have installed a patched MBR that is supposed to put my controller into AHCI mode. It does this by setting some controller port value that I don't understand. This seems to work as I get this from lspci: 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) Now most, perhaps all, sites that provide a solution (enabling AHCI) suggest that after a sleep/wake cycle that a controller will revert to IDE mode due to how Apple support Windows. They recommend disabling sleep. From author of patchedcode.bin I think Enabling AHCI for Windows on MacBooks NB: I do not have bootcamp installed and I do not have Windows installed. Is there a way to prove that my controller is in IDE or AHCI mode? Background Data Using patchedcode.bin MBR I get this in syslog: Jun 12 22:33:22 max kernel: [ 1.860955] ahci 0000:00:1f.2: version 3.0 Jun 12 22:33:22 max kernel: [ 1.861052] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X Jun 12 22:33:22 max kernel: [ 1.861117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode Jun 12 22:33:22 max kernel: [ 1.861120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems Jun 12 22:33:22 max kernel: [ 1.861130] ahci 0000:00:1f.2: setting latency timer to 64 Jun 12 22:33:22 max kernel: [ 1.880880] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Jun 12 22:33:22 max kernel: [ 1.880983] scsi2 : ahci Jun 12 22:33:22 max kernel: [ 1.884552] scsi3 : ahci Jun 12 22:33:22 max kernel: [ 1.886932] scsi4 : ahci Jun 12 22:33:22 max kernel: [ 1.886998] ata3: SATA max UDMA/133 abar m2048@0xdb504000 port 0xdb504100 irq 45 Jun 12 22:33:22 max kernel: [ 1.887000] ata4: DUMMY Jun 12 22:33:22 max kernel: [ 1.887002] ata5: DUMMY Jun 12 22:33:22 max kernel: [ 2.204103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jun 12 22:33:22 max kernel: [ 2.204656] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 12 22:33:22 max kernel: [ 2.204662] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Jun 12 22:33:22 max kernel: [ 2.205324] ata3.00: configured for UDMA/100 Jun 12 22:33:22 max kernel: [ 2.205554] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0081 PQ: 0 ANSI: 5 Using my original MBR I get this from syslog: Jun 13 18:07:13 max kernel: [ 0.622861] ata_piix 0000:00:1f.1: version 2.13 Jun 13 18:07:13 max kernel: [ 0.622869] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 Jun 13 18:07:13 max kernel: [ 0.622924] ata_piix 0000:00:1f.1: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.623339] scsi0 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623730] scsi1 : ata_piix Jun 13 18:07:13 max kernel: [ 0.623765] ata1: PATA max UDMA/100 cmd 0x8108 ctl 0x811c bmdma 0x80e0 irq 21 Jun 13 18:07:13 max kernel: [ 0.623767] ata2: PATA max UDMA/100 cmd 0x8100 ctl 0x8118 bmdma 0x80e8 irq 21 Jun 13 18:07:13 max kernel: [ 0.623810] ata_piix 0000:00:1f.2: MAP [ Jun 13 18:07:13 max kernel: [ 0.623811] P0 -- -- -- ] Jun 13 18:07:13 max kernel: [ 0.623866] ata_piix 0000:00:1f.2: setting latency timer to 64 Jun 13 18:07:13 max kernel: [ 0.624241] scsi2 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624558] scsi3 : ata_piix Jun 13 18:07:13 max kernel: [ 0.624862] ata3: SATA max UDMA/133 cmd 0x80f8 ctl 0x8114 bmdma 0x8020 irq 18 Jun 13 18:07:13 max kernel: [ 0.624865] ata4: SATA max UDMA/133 cmd 0x80f0 ctl 0x8110 bmdma 0x8028 irq 18 Jun 13 18:07:13 max kernel: [ 1.208879] ata3.00: ATA-8: FUJITSU MHY2200BH, 0081000D, max UDMA/100 Jun 13 18:07:13 max kernel: [ 1.208882] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) Jun 13 18:07:13 max kernel: [ 1.208961] ata1.01: ATAPI: MATSHITA DVD+/-RW UJ-867S, 1.00, max UDMA/33 Jun 13 18:07:13 max kernel: [ 1.216186] ata3.00: configured for UDMA/100 Jun 13 18:07:13 max kernel: [ 1.224396] ata1.01: configured for UDMA/33

  Read the article

• Windows 2008 R2 SMB / CIFS Logging to diagnose Brother MFC Network Scanning

  - by Steven Potter

  I am attempting to setup network scanning on a brother MFC-9970CDW printer. According to the Brother documentation, the printer is setup to connect to any CIFS network share. I applied all of the appropriate setting in the printer however I get a "sending error" when I try to scan a document. When I look at the logs of the 2008 R2 server that I am attempting to connect to; I can see in the security log where the printer successfully authenticates, however nothing else is logged. I would assume that immediately after the authentication, the printer is making a CIFS request and some sort of error is occurring, however I can't seem to find any way to log this information to find out what is going on. Is it possible to get Windows 2008 to log SMB/CIFS traffic? Followup: I installed Microsoft netmon and captured the packets associated with the transaction: 510 3:04:28 PM 7/9/2012 34.4277743 System 192.168.1.134 192.168.1.10 SMB SMB:C; Negotiate, Dialect = NT LM 0.12 {SMBOverTCP:30, TCP:29, IPv4:22} 511 3:04:28 PM 7/9/2012 34.4281246 System 192.168.1.10 192.168.1.134 SMB SMB:R; Negotiate, Dialect is NT LM 0.12 (#0), SpnegoToken (1.3.6.1.5.5.2) {SMBOverTCP:30, TCP:29, IPv4:22} 519 3:04:29 PM 7/9/2012 34.8986214 System 192.168.1.134 192.168.1.10 SMB SMB:C; Session Setup Andx, NTLM NEGOTIATE MESSAGE {SMBOverTCP:30, TCP:29, IPv4:22} 520 3:04:29 PM 7/9/2012 34.8989310 System 192.168.1.10 192.168.1.134 SMB SMB:R; Session Setup Andx, NTLM CHALLENGE MESSAGE - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED {SMBOverTCP:30, TCP:29, IPv4:22} 522 3:04:29 PM 7/9/2012 34.9022870 System 192.168.1.134 192.168.1.10 SMB SMB:C; Session Setup Andx, NTLM AUTHENTICATE MESSAGEVersion:v2, Domain: CORP, User: PRINTSUPOFF, Workstation: BRN001BA9AD1FE6 {SMBOverTCP:30, TCP:29, IPv4:22} 523 3:04:29 PM 7/9/2012 34.9032421 System 192.168.1.10 192.168.1.134 SMB SMB:R; Session Setup Andx {SMBOverTCP:30, TCP:29, IPv4:22} 525 3:04:29 PM 7/9/2012 34.9051855 System 192.168.1.134 192.168.1.10 SMB SMB:C; Tree Connect Andx, Path = \\192.168.1.10\IPC$, Service = ????? {SMBOverTCP:30, TCP:29, IPv4:22} 526 3:04:29 PM 7/9/2012 34.9053083 System 192.168.1.10 192.168.1.134 SMB SMB:R; Tree Connect Andx, Service = IPC {SMBOverTCP:30, TCP:29, IPv4:22} 528 3:04:29 PM 7/9/2012 34.9073573 System 192.168.1.134 192.168.1.10 DFSC DFSC:Get DFS Referral Request, FileName: \\192.168.1.10\NSCFILES, MaxReferralLevel: 3 {SMB:33, SMBOverTCP:30, TCP:29, IPv4:22} 529 3:04:29 PM 7/9/2012 34.9152042 System 192.168.1.10 192.168.1.134 SMB SMB:R; Transact2, Get Dfs Referral - NT Status: System - Error, Code = (549) STATUS_NOT_FOUND {SMB:33, SMBOverTCP:30, TCP:29, IPv4:22} 531 3:04:29 PM 7/9/2012 34.9169738 System 192.168.1.134 192.168.1.10 SMB SMB:C; Tree Disconnect {SMBOverTCP:30, TCP:29, IPv4:22} 532 3:04:29 PM 7/9/2012 34.9170688 System 192.168.1.10 192.168.1.134 SMB SMB:R; Tree Disconnect {SMBOverTCP:30, TCP:29, IPv4:22} As you can see, the DFS referral fails and the transaction is shut down. I can't see any reason for the DFS referral to fail. The only reference I can find online is: https://bugzilla.samba.org/show_bug.cgi?id=8003 Anyone have any ideas for a solution?

  Read the article

• Wireless AAA for a small, bandwidth-limited hotel.

  - by Anthony Hiscox

  We (the tech I work with and myself) live in a remote northern town where Internet access is somewhat of a luxury, and bandwidth is quite limited. Here, overage charges ranging from few hundreds, to few thousands of dollars a month, is not uncommon. I myself incur regular monthly charges just through my regular Internet usage at home (I am allowed 10G for $60CAD!) As part of my work, I have found myself involved with several hotels that are feeling this. I know that I can come up with something to solve this problem, but I am relatively new to system administration and I don't want my dreams to overcome reality. So, I pass these ideas on to you, those with much more experience than I, in hopes you will share some of your thoughts and concerns. This system must be cost effective, yes the charges are high here, but the trust in technology is the lowest I've ever seen. Must be capable of helping client reduce their usage (squid) Allow a limited (throughput and total usage) amount of free Internet, as this is often franchise policy. Allow a user to track their bandwidth usage Allow (optional) higher speed and/or usage for an additional charge. This fee can be obtained at the front desk on checkout and should not require the use of PayPal or Credit Card. Unfortunately some franchises have ridiculous policies that require the use of a third party remote service to authenticate guests to your network. This means WPA is out, and it also means that I do not auth before Internet usage, that will be their job. However, I do require the ABILITY to perform authentication for Internet access if a hotel does not have this policy. I will still have to track bandwidth (under a guest account by default) and provide the same limiting, however the guest often will require a complete 'unlimited' access, in terms of existence, not throughput. Provide firewalling capabilities for hotels that have nothing, Office, and Guest network segregation (some of these guys are running their office on the guest network, with no encryption, and a simple TOS to get on!) Prevent guests from connecting to other guests, however provide a means to allow this to happen. IE. Each guest connects to a page and allows the other guest, this writes a iptables rule (with python-netfilter) and allows two rooms to play a game, for instance. My thoughts on how to implement this. One decent box (we'll call it a router now) with a lot of ram, and 3 NIC's: Internet Office Guests (AP's + In Room Ethernet) Router Firewall Rules Guest can talk to router only, through which they are routed to where they need to go, including Internet services. Office can be used to bridge Office to Internet if an existing solution is not in place, otherwise, it simply works for a network accessible web (webmin+python-webmin?) interface. Router Software: OpenVZ provides virtualization for a few services I don't really trust. Squid, FreeRADIUS and Apache. The only service directly accessible to guests is Apache. Apache has mod_wsgi and django, because I can write quickly using django and my needs are low. It also potentially has the FreeRADIUS mod, but there seems to be some caveats with this. Firewall rules are handled on the router with iptables. Webmin (or a custom django app maybe) provides abstracted control over any features that the staff may need to access. Python, if you haven't guessed it's the language I feel most comfortable in, and I use it for almost everything. And finally, has this been done, is it a overly massive project not worth taking on for one guy, and/or is there some tools I'm missing that could be making my life easier? For the record, I am fairly good with Python, but not very familiar with many other languages (I can struggle through PHP, it's a cosmetic issue there). I am also an avid linux user, and comfortable with config files and command line. Thank you for your time, I look forward to reading your responses. Edit: My apologies if this is not a Q&A in the sense that some were expecting, I'm just looking for ideas and to make sure I'm not trying to do something that's been done. I'm looking at pfSense now as a possible start for what I need.

  Read the article

• What are the pitfalls of hardlinked files on my desktop PC?

  - by MountainX

  All the identical-content files on my PC are now hardlinked. (My data is completely de-duplicated. It is a consequence of the way I copied my data from my old computer.) What pitfalls do I need to be aware of now that certain actions on one file could silently affect a number of other files? I know that deleting the file I'm working on is not a problem (assuming I deleted it on purpose). It doesn't affect any of the other hardlinked files and I don't see that the delete action would lead to unexpected side effects. Moving or renaming the file is not a problem. I don't see any unexpected consequences. I don't think copying hardlinked files is a problem, but I'm not as confident about any unexpected consequences in this regard. What I have seen is that making a copy (to the same disk) of a hardlinked file with cp keeps the copy hardlinked (i.e., inode number doesn't change in the copy). Copying to another filesystem obviously breaks the hardlink. (I guess one pitfall is forgetting this fact, given that my PC has 3 hard disks.) Changing permissions does affect all linked files. So far this has proven handy. (I made a large number of the hardlinked files read-only.) None of the operations above seem to produce any major unexpected consequences. However, as was pointed out to me by Daniel Beck in a comment, editing or modifying a file can sometimes be a problem. It depends on the tool and maybe the type of edit. (For example, editing small text files using sed seems to always break the link while using nano doesn't.) This introduces the chance that editing one file could affect all the hardlinked files (i.e., alter the original inode). My proposed solution to this is to make all hardlinked files read-only (and that is already mostly the case). If I can't do that for some files, I will unlink those particular files. Is there any problem with this read-only approach? I'm assuming that if I go to edit a file and find it to be read-only, I'll remember to unlink that filename while making it writable. So one pitfall might be forgetting this rule. In that case, I'll have to rely on my backups. Am I correct in the above statements? And what else do I need to know? BTW, I'm running Kubuntu 12.04. I'm also using btrfs. (I have 2 SSD's and 1 HDD in the PC. I will also be adding an external USB HDD. I'm also connected to a network and I mount some NFS shares. I don't assume any of these last bits are relevant to the question, but I'm adding them just in case.) BTW, since I have more than one drive (with separate file systems), to unlink any file all I have to do is copy it to another drive, then move it back. However, using sed also works (in my testing). Here's my script: sed -i 's/\(.\)/\1/' file1 Surprisingly, this even unlinks zero byte files. In my testing it also appears to work on non-text files without any special options. (But I understand that the --binary option might be needed on Windows, MS-DOS and Cygwin.) However, copying to another disk and moving back may be the best way to unlink. For my use-case, unlink command doesn't really "unlink", rather it "removes".

  Read the article

• CPU Temperature sensor wrong?

  - by Matias Nino

  Everest Ultimate is suddenly telling me that the CPU temperature (and core temps) for my E6850 Core 2 Duo is 72 degrees Celsius. When I stress-test the machine, the temp goes up to 91 degrees and the CPU actually throttles. System remains stable though. For over a year now, my CPU has run very cool (40's) with a large commercial copper heatsink/fan that I bought separately. To top it off, I removed the cover of the box and felt the cpu heatsink and it wasn't even warm. Is there such a thing as a CPU temp sensor showing the wrong readings? Any tips would help. UPDATE #1 Temp is also just as high in BIOS. So that leads me to believe it's a CPU seating issue (even though I used thermal paste to seat it two years ago when I built the machine) UPDATE #2 Well. I removed the heatsink and cleaned off the original thermal paste (which was somewhat crusty). I polished the surface, re-applied some new paste, and reseated the heat sink. After powering it up, there was no noticeable change in the temp - ideling at 74. Ran the stress test and it went up to 94 degrees before being 100% throttled. I let it sit at 94 degrees for 20 minutes straight and the computer didn't even flinch. I then immediately shut it off and opened the case and felt around. The heatsink was completely cold to the touch. Even the copper rods were cold. The area near contact with the CPU was slightly warm but not hot to touch. Then I ran REALTEMP, which is supposedly more accurate and it told me the CPU was at 104 degrees. (LOL) At this point, I'm thinking no doubt the cpu's sensor is wrong. Sidenote: the BIOS has the latest version so no option to flash there. Reverting hasn't been known to help from what I've read. What pisses me off is the false temps force the CPU to artificially throttle from 3GHz down to 2GHz and my CPU fan is cranking at full force all the time. Should I call intel and tell them to send me another E6850? SOLUTION UPDATE I switched the processor out with another one and got the same obscene temperatures with the new processor followed by a heatsink that was cool to touch. My suspicion in the heatsink was suddenly renewed. I swapped it out with the stock heatsink/fan and lo and behold the temperatures returned to the normal 35C-50C. Even though the thermal paste was visibly flattened out every time I removed it, it looks like the heatsink was still not pressing hard enough on the CPU to effectively conduct the heat. The heatsink is a Masscool 8Wa741, which screws into a standard position on a mount on the back of the MOBO. Only thing I can surmise after 2 years of use was that, over time, the heatsink pressure on the CPU gave way until the heat began to be ineffectively conducted. Lessons learned: Intel CPU's can run SUPER HOT (upwards of 95C) and still be stable. Heatsink's need to be VERY firmly pressed against the CPU to conduct heat.

  Read the article

• Windows 7 .NET 3.5.1 - 2.0 Slightly Corrupted, How to Repair?

  - by Quinxy von Besiex

  My Windows 7 included .NET installation (3.5 to 2.0) appears very slightly and particularly corrupted and I am trying to fix it without reinstalling Windows or trying to revert to backups. Everything was working and then my hard drive started corrupting a few files and checkdisk found bad clusters so I imaged the drive to a new one. As soon as I booted on the new drive everything worked except programs which call the System.Net.NetworkInformation methods within .NET 3.5 to 2.0 (like Ping() and IsNetworkAvailable()), which immediately crash the app in which the calls are (those calls in .NET 4.0 works fine). Those methods are found inside System.dll, and I assume call native methods which I believe are inside winnsi.dll or iphlpapi.dll or something else (I've not found this yet); I assume it calls native methods because the exception which causes the crash is Fatal Execution Engine Error which people mention is usually related to calling native methods and marshaling data between them. A huge clue about the culprit is likely found in the fact that when I launch the exact same crashing application through a code profiler (which executes the exe and captures stats on which methods took the longest) the app works fine, no crash at all! How could running it within the profiler work and running it outside not work? That seems the key to the mystery. I've used procmon to catch all the registry, filesystem, and network events from the crashing execution and the profiler-run successful execution and compared the two outputs but didn't learn much (I see the moment at which the non-profiled app crashes, but up until then they behave the same, loaded the same modules, ). The only big difference seems to be that at the moment before the app crash the profiler-executed code creates 4-6 new threads and the directly executed code only creates 1-2. I have diffed the files/directories which seemed most relevant (the .NET stuff under Windows and Program Files) pre- and post- disk trouble and seen no changes where I didn't expect any (no obvious file corruption). I have diffed the software and system registry hives pre- and post- disk trouble and seen no changes which seemed relevant. I have created a new user account and cleaned up any environment variables in case environment was related. No change. I did "sfc /scannow" and it found no integrity problems. I tried "ngen update" to regenerate pre-compiled code in case I missed something that might be damaged and nothing changed. I assume I need to repair my .NET installation but because Windows 7 included .NET 3.5 - 2.0 you can't just re-run a .NET installer to redo it. I do not have access to the Windows disks to try to re-install Windows over itself (the computer has a recovery partition but it is unusable); also the drive uses a whole-disk encryption solution and re-installing would be difficult. I absolutely do not want to start from scratch here and install a fresh Windows, reinstall dozens of software packages, try and remember dozens of development-related customizations/etc. Given all that... does anyone have any helpful advice? I need .NET 3.5 - 2.0 working as I am a developer and need to build and test against it. Thanks! Quinxy

  Read the article

• xrandr shows two displays (LVDS1), but how can I use VGA1 only?

  - by Tom Fishman

  We're running Ubuntu 11 on this hardware: Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone There is no integrated display (it is a barebone box). I connected an external VGA to it. However xrandr shows two displays: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 60.0 1280x1024 76.0 75.0 72.0 60.0 1440x900 75.0 59.9 1152x864 75.0 1024x768 75.1 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 But I don't have two displays. How can I get rid of LVDS1 and use only VGA1? The direct result is that I'm seeing a 1024x768 resolution on my VGA display, because the OS is using "mirror" mode which uses the lower resolution of the two. Turning off the mirror is not a solution. I want to fix it. Related logs: ... [ 20.019] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.019] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.019] (==) intel(0): RGB weight 888 [ 20.019] (==) intel(0): Default visual is TrueColor [ 20.019] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 20.019] (--) intel(0): Chipset: "Pineview G" [ 20.019] (**) intel(0): Relaxed fencing enabled [ 20.019] (**) intel(0): Wait on SwapBuffers? enabled [ 20.019] (**) intel(0): Triple buffering? enabled [ 20.019] (**) intel(0): Framebuffer tiled [ 20.019] (**) intel(0): Pixmaps tiled [ 20.020] (**) intel(0): 3D buffers tiled [ 20.020] (**) intel(0): SwapBuffers wait enabled [ 20.020] (==) intel(0): video overlay key set to 0x101fe [ 20.020] (II) intel(0): Output LVDS1 has no monitor section [ 20.020] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 20.080] (II) intel(0): Output VGA1 has no monitor section [ 20.080] (II) intel(0): EDID for output LVDS1 [ 20.081] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) ... [ 20.082] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.082] (II) intel(0): Printing probed modes for output LVDS1 [ 20.082] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.082] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.149] (II) intel(0): EDID for output VGA1 [ 20.149] (II) intel(0): Manufacturer: BNQ Model: 771b Serial#: 6595 [ 20.149] (II) intel(0): Year: 2008 Week: 16 [ 20.149] (II) intel(0): EDID Version: 1.3 [ 20.149] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V ... [ 20.152] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.152] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 20.152] (II) intel(0): Output LVDS1 connected [ 20.152] (II) intel(0): Output VGA1 connected [ 20.152] (II) intel(0): Using exact sizes for initial modes [ 20.152] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 20.152] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 20.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. ...

  Read the article

• broadcom 5722 NIC not installed on Ubuntu Server, although driver present

  - by Bastien

  Hello, I just installed Ubuntu Server 10.04 LTS, running kernel 2.6.32-24-server, on a brand new Dell T110 server, supposedly fully compatible with Ubuntu Server. I have two NICs: one ONBOARD, the other additional on PCI. both of them are Broadcom netXtreme 5572. on the first boot of the system, I could see both cards as eth0 and eth1 (with ifconfig) I configured eth0 as static IP (as planned), and did not configure eth1. after rebooting, one of the two NICs "disappeared": it does not appear in ifconfig at all. the one that disappeared is the ONBOARD one. I investigated a bit and found the following things: the card is SEEN, but not "installed", it appears as "UNCLAIMED" in lshw: *-network UNCLAIMED description: Ethernet controller product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress cap_list configuration: latency=0 resources: memory:df9f0000-df9fffff *-network description: Ethernet interface product: NetXtreme BCM5722 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 00 serial: 00:10:18:60:23:64 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.102 duplex=full firmware=5722-v3.09 ip=10.129.167.25 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:35 memory:dfaf0000-dfafffff so I checked my dmesg and found a few strange lines, showing, there actually is a problem bringing up this card: [ 3.737506] tg3: Could not obtain valid ethernet address, aborting. [ 3.737527] tg3 0000:04:00.0: PCI INT A disabled [ 3.737535] tg3: probe of 0000:04:00.0 failed with error -22 [ 3.737553] alloc irq_desc for 17 on node -1 [ 3.737555] alloc kstat_irqs on node -1 [ 3.737560] tg3 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.737566] tg3 0000:05:00.0: setting latency timer to 64 [ 3.793529] eth0: Tigon3 [partno(BCM95722A2202G) rev a200] (PCI Express) MAC address 00:10:18:60:23:64 [ 3.793532] eth0: attached PHY is 5722/5756 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.793534] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.793536] eth0: dma_rwctrl[76180000] dma_mask[64-bit] that actually shows that one NIC is recognized, the other is not. I researched a bit more, with lspci -v: 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: fast devsel, IRQ 16 Memory at df9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-fe-ff-00-00-00 Kernel modules: tg3 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Subsystem: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express Flags: bus master, fast devsel, latency 0, IRQ 35 Memory at dfaf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: [48] Power Management version 3 Capabilities: [50] Vital Product Data <?> Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number 64-23-60-fe-ff-18-10-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: tg3 Kernel modules: tg3 here I could see that the MAC address is 00-00-00-FE-FF-00-00-00, which, according to some forum posts on several websites, could be an issue. I've researched everything I could on the net, and found out several people having slightly comparable issues, but they usually involve different HW, and do not provide a proper explanation / solution... I would appreciate if anyone around here has some info to share ! thanks

  Read the article

• SQL Server Issue: Could not allocate space for object ... primary filegroup is full

  - by Luke

  Trying to figure out a problem at an office that has SQL Server 2005 installed on Windows SBS Server 2008. Here's the setup: It's an office, and the person who set this all up is nowhere to be found. I'm the best hope they have... One of the programs they use on a workstation gives them an error of "Could not allocate space for object 'Billing' in database "MyDatabase" because primary filegroup is full" when trying to save an entry in their software. I searched around for hours, looking for possible solutions. One was to check for available disk space, and another was to defrag. I checked the hard drives on the server, and there is plenty of space free. I also defragged, which may have helped the problem somewhat. It's hard to say, because it seems like with the nature of the error, if you try over and over you might get it to actually save. My next step was to try to see if autogrowth was enabled on the database. This would seem to be a likely / possible solution, but I can't access the database! If I run the SQL Management Studio, I can log in as my Windows user and view the list of databases. However, if I try to do anything (actually view the database, view the properties, add or edit users), I get errors that I don't have permission. For what it's worth, I also tried runing Management Studio as Administrator, in case that would help. No difference, though. Now, what I'm guessing is going on -- from my limited knowledge of SQL and from reading online -- is that though I'm logged in as a Windows administrator, that account does NOT have SQL access. I do see a list of SQL users, including SA, but I again don't have permission to add one or to change the password on an existing one. And nobody at the office has any idea what the SQL passwords could be. So... here's my thinking thus far: 1 - The "Could not allocate" error likely points to a database that needs to be allowed to autogrow. Especially since I verified there is plenty of free space and the HD has been defragmented. 2 - Enabling autogrow would be very easy to do if I had the proper access within SQL Management Stuido. That leads me to this link: http://blogs.technet.com/b/sqlman/archive/2011/06/14/tips-amp-tricks-you-have-lost-access-to-sql-server-now-what.aspx It sounds like it's a step-by-step guide for giving me the access I need to SQL. I'm guessing that if I followed this guide, I would be able to then log in to the SQL server via Management Studio with the proper permissions, and would be able to enable autogrow (or simply view the status of the existing database), and hopefully solve the "Could not allocate space" problem! So I guess I have a few questions: 1 - Would you guys agree with my "diagnosis"? Think I'm barking up the right tree? 2 - Is there any risk at all in hurting / disabling / wrecking the current SQL database or setup with me going through the guide to regain SQL access? I understand that per the guide, I would have to temporarily shut down SQL, so obviously it wouldn't be accessible during that time. But it wouldn't be worth the risk if there's a chance I could mess anything up... Like I said, the workstations ARE currently accessing the database somehow, but nobody knows with what login info or anything. Basically, it's set up, it works (usually), but if they had to reload the software, nobody would know how. Any feedback would be appreciated!! The problem is such that it's not an emergency for them, but an annoyance. If I could fix it, it would be wonderful. But if not, I think they'll manage, especially as they are going to eventually stop using this software. Thank you so much for your time! Luke

  Read the article

• Chrome does not re-draw properly on Windows 8

  - by Akshat Mittal

  There are a lot of problems with Chrome (24.0.1312.14 beta || But all this happened before update also) on Windows 8. Problems and explanations are listed below: Google Chrome re-draw time: When I switch tabs, the window retains the content of the previous tab and displays that even if I move my mouse, if only refreshes (re-draws) when there is a change on the webpage (like on hover) or I do a select all (or scroll). One thing to note is that the hover and select happens on the real page and not the retained image-like thing of the older webpage. Chrome is slow and laggy: Websites such as Facebook and Twitter (and more) have gone extremely laggy on Chrome (Win 8). When I was using Windows 7, I never experienced a lag or something. Also when using HTML-5 Websites, the transition (the -webkit-transition in CSS) goes extremely slow at times. Plugins Crash: Plugins like Flash Player, Shockwave Player, and more that are in-built into Chrome Crashes a lot, even when doing simple tasks like playing YouTube Videos, displaying ads or something. Chrome Crashes: Chrome has crashed over 100 times in the past month. Google Chrome just crashes randomly or I don't know the reason. Random Page crashes: Chrome results chrome://crash/(Copy-Paste this in address bar) on random pages even when the page is just loaded, I understand that this can happen on heavy HTML5 or JS websites but what about HTML only websites? Computer Freeze: Chrome sometimes, randomly, freezes my computer. Freeze in the sense, none of the other apps are also working. It's like the whole system freezes, I can not even switch to other apps. I am sure that this is because of Chrome since this happens only when Chrome is active. Most of the things above happens on Super User also, Super User never had any problem when using Chrome on Windows 7. UPDATE 1: @magicandre1981 Commented for trying to disable Hardware Acceleration. I tried it, it somewhat solved the problem but din't fix it. I am still experiencing all the above issues but less frequently (maybe because Chrome Restarted Completely) UPDATE 2: @avirk asked me to try a Stable Version of Chrome and Firefox, I din't experience any lag in Firefox, a little (negligible) lag in Chrome 22 (Maybe because its a new copy of Chrome, I haven't used it much). UPDATE 3: @NothingsImpossible said that He is also experiencing the same problem on Windows Server 2008! This seams to be a major issue now. He also said that GPU load is also high at the same time! Even I saw the same thing. UPDATE 4: Recently, Chrome updated to v24 Stable (I am using stable from a long time now). I was experiencing this problem a lot less in Chrome 23, but this is back in Chrome 24. Seams like Chrome 24 is the most affected from this bug, as this same problem was high in Chrome 24 beta also. UPDATE 5: Chrome was updated to v25 Stable. This problem is 99% Gone, it is still there in 1% of the cases. One such example is when I leave chrome inactive for a while with a few tabs open, the tabs go black and no activity can get them back to active state. If I open a new tab, the new tab is OK but the others are still black, I need to close all those tabs. UPDATE 6: Chrome updated to v27 Stable channel, this problem is nearly gone. This does happen occasionally, but not as frequent as in earlier versions of Chrome. UPDATE 7: I am on Chrome v35.0.1916.114 Stable, Windows 8.1 Pro Update 1. Some of the other problems appears to be back. Chrome is slow and laggy again. Re-draw time is getting worse. Is anybody else experiencing such issues? Does anybody have a solution to any of these?

  Read the article

• Prevent auto mounting Android sdcard under Linux Mint

  - by BullShark

  I recently obtained an older Android phone, so that I could test Android Apps on it. I've needed it because I have a Nexus 7 but not older Android versions, hardware, etc. to test on. I'm having a problem with it under Linux Mint with Cinnamon. When I plug the phone in, or remove and plug the sdcard from the phone back to it while the phone is plugged in, Linux automatically mounts the sdcard. This is a problem because once it is mounted under Linux, it dismounts from the phone running Android 2.3.5, and I can no longer test Android Apps I write that require the sdcard to be present, writable. I went to Menu System Tools System Settings System Details Removable Media, and it brings up this window. I have changed the settings to always "Ask what to do" on "Select how media should be handled". However, the sdcard still gets mounted and then I am asked how I want to open these files (media players, photo importers, file browser, etc.). If I click the checkbox for "Never prompt or start programs on media insertion", then the sdcard is mounted, and I am not asked how to open these files. Eject is just a noob word for Ubuntu users that means umount (unmount) like "Adminstrator" is another ubuntu noob word for the root user. And if I unmount the sdcard, the phone doesn't recognize it again until I take the sdcard out and plug it back in. The phone sees it for a brief moment until Linux Mint takes it over. There are 2 possible solutions and maybe more: 1) Prevent Linux from automounting sdcards some how 2) Tell Android not to allow the computer it is plugged into to take over the sdcard, HOW? Edit: I found out how to prevent the sdcard from being automatically mounted: Now it gets recognized by Linux: bullshark@beastlinux ~ $ dmesg | tail -n 25 [597212.218323] sd 21:0:0:0: [sde] Attached SCSI removable disk [597212.218639] sr 21:0:0:1: Attached scsi CD-ROM sr2 [597212.218910] sr 21:0:0:1: Attached scsi generic sg7 type 5 [597217.139373] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597217.140726] sd 21:0:0:0: [sde] No Caching mode page present [597217.140735] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.143595] sd 21:0:0:0: [sde] No Caching mode page present [597217.143602] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.152240] sde: sde1 [597389.751008] 4:2:1: cannot get freq at ep 0x84 [597390.238742] 4:2:1: cannot get freq at ep 0x84 [597624.903132] sde: detected capacity change from 1977614336 to 0 [597637.677763] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597637.679616] sd 21:0:0:0: [sde] No Caching mode page present [597637.679626] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.682508] sd 21:0:0:0: [sde] No Caching mode page present [597637.682515] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.692758] sde: sde1 [597661.857979] sde: detected capacity change from 1977614336 to 0 [597688.775455] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597688.776814] sd 21:0:0:0: [sde] No Caching mode page present [597688.776823] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.780055] sd 21:0:0:0: [sde] No Caching mode page present [597688.780062] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.788639] sde: sde1 bullshark@beastlinux ~ $ However, the phone still unmounts the sdcard upon being detected by Linux. Linux detects but does not mount, and a few seconds later: Edit #2 (Solution): I solved this one by changing the usb connection type (was usb mass storage) :

  Read the article

• Cannot ping Localhost so I can't shutdown Tomcat

  - by gav

  Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

  Read the article

• apache+mod_wsgi configuration for django project(s) on a quad core

  - by Stefano

  I've been experiment quite some time with a "typical" django setting upon nginx+apache2+mod_wsgi+memcached(+postgresql) (reading the doc and some questions on SO and SF, see comments) Since I'm still unsatisfied with the behavior (definitely because of some bad misconfiguration on my part) I would like to know what a good configuration would look like with these hypotesis: Quad-Core Xeon 2.8GHz 8 gigs memory several django projects (anything special related to this?) These are excerpts form my current confs: apache2 SetEnv VHOST null #WSGIPythonOptimize 2 <VirtualHost *:8082> ServerName subdomain.domain.com ServerAlias www.domain.com SetEnv VHOST subdomain.domain AddDefaultCharset UTF-8 ServerSignature Off LogFormat "%{X-Real-IP}i %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\"" custom ErrorLog /home/project1/var/logs/apache_error.log CustomLog /home/project1/var/logs/apache_access.log custom AllowEncodedSlashes On WSGIDaemonProcess subdomain.domain user=www-data group=www-data threads=25 WSGIScriptAlias / /home/project1/project/wsgi.py WSGIProcessGroup %{ENV:VHOST} </VirtualHost> wsgi.py import os import sys # setting all the right paths.... _realpath = os.path.realpath(os.path.dirname(__file__)) _public_html = os.path.normpath(os.path.join(_realpath, '../')) sys.path.append(_realpath) sys.path.append(os.path.normpath(os.path.join(_realpath, 'apps'))) sys.path.append(os.path.normpath(_public_html)) sys.path.append(os.path.normpath(os.path.join(_public_html, 'libs'))) sys.path.append(os.path.normpath(os.path.join(_public_html, 'django'))) os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi _application = django.core.handlers.wsgi.WSGIHandler() def application(environ, start_response): """ Launches django passing over some environment (domain name) settings """ application_group = environ['mod_wsgi.application_group'] """ wsgi application group is required. It's also used to generate the HOST.DOMAIN.TLD:PORT parameters to pass over """ assert application_group fields = application_group.replace('|', '').split(':') server_name = fields[0] os.environ['WSGI_APPLICATION_GROUP'] = application_group os.environ['WSGI_SERVER_NAME'] = server_name if len(fields) > 1 : os.environ['WSGI_PORT'] = fields[1] splitted = server_name.rsplit('.', 2) assert splitted >= 2 splited.reverse() if len(splitted) > 0 : os.environ['WSGI_TLD'] = splitted[0] if len(splitted) > 1 : os.environ['WSGI_DOMAIN'] = splitted[1] if len(splitted) > 2 : os.environ['WSGI_HOST'] = splitted[2] return _application(environ, start_response)` folder structure in case it matters (slightly shortened actually) /home/www-data/projectN/var/logs /project (contains manage.py, wsgi.py, settings.py) /project/apps (all the project ups are here) /django /libs Please forgive me in advance if I overlooked something obvious. My main question is about the apache2 wsgi settings. Are those fine? Is 25 threads an /ok/ number with a quad core for one only django project? Is it still ok with several django projects on different virtual hosts? Should I specify 'process'? Any other directive which I should add? Is there anything really bad in the wsgi.py file? I've been reading about potential issues with the standard wsgi.py file, should I switch to that? Or.. should this conf just be running fine, and I should look for issues somewhere else? So, what do I mean by "unsatisfied": well, I often get quite high CPU WAIT; but what is worse, is that relatively often apache2 gets stuck. It just does not answer anymore, and has to be restarted. I have setup a monit to take care of that, but it ain't a real solution. I have been wondering if it's an issue with the database access (postgresql) under heavy load, but even if it was, why would the apache2 processes get stuck? Beside these two issues, performance is overall great. I even tried New Relic and got very good average results.

  Read the article

• Scenarios for Bazaar and SVN interaction

  - by Adam Badura

  At our company we are using SVN repository. I'm doing programming from both work (main place) and home (mostly experiments and refactoring). Those are two different machines, in different networks and almost never turned on at the same time (after all I'm either at work or at home...) I wanted to give a chance to some distributed version control system and solve some of the issues associated with SVN based process and having two machines. From git, Mercurial and Bazaar I chose to start with Bazaar since it claims that it is designed do be used by human beings. Its my first time with distributed system and having nice and easy user interface was important for me. Features I wanted to achieve were: Being able to update from SVN repository and commit to it. Being able to commit locally steps of my work on a task. Being able to have few separate tasks at the same time in their own local branches. Being able to share those branches between my work and home computer. As a means of transport between work and home computer I wanted to use a pen-drive. Company server will not work since I may not instal there anything. Neither will work a web service repository as I may not upload source code to web (especially if it would be public which seems to be a common case in free web services). This transport should be Bazaar-based (or what ever else I will end with) so it can be done more or less automatically but manual copying and pasting some folders or generating patch files (providing they would work - I have bad experience with patch files in SVN) would work as well if there is no better solution. Yet the pen-drive should only be used for transportation. I do not want to edit or build there. I tried following Bazaar guidelines for integration with SVN. But I failed. I tried both bzr svn-import and bzr checkout providing URL from my repository as both https://... and svn+https://.... In some cases it had some issues with certificates but the output specified argument to ignore them so I did that. Sometimes it asked me to log in (in other cases maybe it remembered... I don't know) which I did. All were running very slow (this could be our server issue) and at some point were interrupted due to connection interruption (this almost for sure is our server issue: it truncates the connection after some time). But since (as opposed to SVN) restarting starts a new rather than from point where it was interrupted I was unable to reach all the ~19000 revisions (ending usually somewhere around 150). What and how should I do with Bazaar? Is is possible to somehow import SVN repository from the local checkout (so that I do not suffer the connection truncation)? I was told that a colleague that used to work with us has done something similar (importing SVN repository with full history) with Mercurial like in no time. So I'm seriously considering now trying Mercurial even if only to see if that will work. But also what are your general guidelines to achieve the listed features?

  Read the article

• Network Restructure Method for Double-NAT network

  - by Adrian

  Due to a series of poor network design decisions (mostly) made many years ago in order to save a few bucks here and there, I have a network that is decidedly sub-optimally architected. I'm looking for suggestions to improve this less-than-pleasant situation. We're a non-profit with a Linux-based IT department and a limited budget. (Note: None of the Windows equipment we have runs does anything that talks to the Internet nor do we have any Windows admins on staff.) Key points: We have a main office and about 12 remote sites that essentially double NAT their subnets with physically-segregated switches. (No VLANing and limited ability to do so with current switches) These locations have a "DMZ" subnet that are NAT'd on an identically assigned 10.0.0/24 subnet at each site. These subnets cannot talk to DMZs at any other location because we don't route them anywhere except between server and adjacent "firewall". Some of these locations have multiple ISP connections (T1, Cable, and/or DSLs) that we manually route using IP Tools in Linux. These firewalls all run on the (10.0.0/24) network and are mostly "pro-sumer" grade firewalls (Linksys, Netgear, etc.) or ISP-provided DSL modems. Connecting these firewalls (via simple unmanaged switches) is one or more servers that must be publically-accessible. Connected to the main office's 10.0.0/24 subnet are servers for email, tele-commuter VPN, remote office VPN server, primary router to the internal 192.168/24 subnets. These have to be access from specific ISP connections based on traffic type and connection source. All our routing is done manually or with OpenVPN route statements Inter-office traffic goes through the OpenVPN service in the main 'Router' server which has it's own NAT'ing involved. Remote sites only have one server installed at each site and cannot afford multiple servers due to budget constraints. These servers are all LTSP servers several 5-20 terminals. The 192.168.2/24 and 192.168.3/24 subnets are mostly but NOT entirely on Cisco 2960 switches that can do VLAN. The remainder are DLink DGS-1248 switches that I am not sure I trust well enough to use with VLANs. There is also some remaining internal concern about VLANs since only the senior networking staff person understands how it works. All regular internet traffic goes through the CentOS 5 router server which in turns NATs the 192.168/24 subnets to the 10.0.0.0/24 subnets according to the manually-configured routing rules that we use to point outbound traffic to the proper internet connection based on '-host' routing statements. I want to simplify this and ready All Of The Things for ESXi virtualization, including these public-facing services. Is there a no- or low-cost solution that would get rid of the Double-NAT and restore a little sanity to this mess so that my future replacement doesn't hunt me down? Basic Diagram for the main office: These are my goals: Public-facing Servers with interfaces on that middle 10.0.0/24 network to be moved in to 192.168.2/24 subnet on ESXi servers. Get rid of the double NAT and get our entire network on one single subnet. My understanding is that this is something we'll need to do under IPv6 anyway, but I think this mess is standing in the way.

  Read the article

• One email user keeps disconnecting from our exchange server

  - by Funky Si

  I have one user who keeps reporting that Outlook keeps disconnecting from our email server. All other users are fine. Our email server is running Exchange 2010 and the client is running Outlook 2003. The disconnection only lasts a moment. I have checked for logs on the client and Exchange server and can not see any reason for the disconnect, On the Client I get EventId 26 telling me Outlook has disconnected and reconnected but no reason why. Can anyone give me some suggestions of things to try and track down where the problem could be? --Update-- I have found the following log file C:\Program Files\Microsoft\Exchange Server\V14\Logging\RPC Client Access which suggests that it is a problem with RPC sessions. Excerpt is below 2013-01-31T15:21:24.015Z,6413,15,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,0,00:00:00,"BS=Conn:24,HangingConn:0,AD:$null/$null/0%,CAS:$null/$null/2%,AB:$null/$null/0%,RPC:$null/$null/1%,FC:$null/0,Policy:ClientThrottlingPolicy2,Norm[Resources:(Mdb)Mailbox Database 0765959540(Health:-1%,HistLoad:0),(Mdb)Public Folder Database 1945427388(Health:-1%,HistLoad:0),];GC:6/1/0;", 2013-01-31T15:21:24.015Z,6413,16,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,PublicLogoff,0,00:00:00,LogonId: 1, 2013-01-31T15:21:24.015Z,6413,16,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,"BS=Conn:24,HangingConn:0,AD:$null/$null/0%,CAS:$null/$null/2%,AB:$null/$null/0%,RPC:$null/$null/1%,FC:$null/0,Policy:ClientThrottlingPolicy2,Norm[Resources:(Mdb)Mailbox Database 0765959540(Health:-1%,HistLoad:0),(Mdb)Public Folder Database 1945427388(Health:-1%,HistLoad:0),];GC:6/1/0;", 2013-01-31T15:21:24.015Z,6417,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,OwnerLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.015Z,6417,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,0x6BA (rpc::Exception),00:02:54.7668000,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0; SessionDropped,"RpcEndPoint: [ServerUnavailableException] Connection must be re-established - [SessionDeadException] Connection doesn't have any open logons, but has client activity. This may be masking synchronization stalls. Dropping a connection." 2013-01-31T15:21:24.015Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00.0156000,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, 2013-01-31T15:21:24.031Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,Disconnect,0,00:02:54.2364000,, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,OwnerLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,Disconnect,0,00:02:54.4392000,, 2013-01-31T15:21:24.031Z,6416,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6416,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, Can anyone help point me in the right direction for a solution?

  Read the article

• How can I tell Firefox to ignore unprintable characters?

  - by BrianH

  Edit: Summary Apparently the intended character to display in this case is an "en-dash". This page has a table half way down that shows that for the &ndash;, some software will convert the correct hex code of 2013 to 0096. (look at the first row in the table). This answer on Stackoverflow explains that somehow this is a mixup between Windows-1252 and UTF-8 This blog article enforces this: Character 150 (0x96) is the unicode character "START OF GUARDED AREA" in the non-displayed C1 control character range, but in the Windows-1252 encoding it's mapped to to the displayable character 0x2013 "en-dash" (a short dash). Others have struggled with this when producing content, as this answer on Stackoverflow shows how to replace 0x0096 with 0x2013. Google must realize this, because as stated in my original question below, Google's cached version of the Amazon page has &ndash; so it seems they are automatically correcting these mistakes on pages they cache. I have tried setting my encoding to Windows-1252 but that does not help. So now I guess my question is, how can I tell Firefox to ignore unprintable characters like these? Original content below: (Firefox 3.6.13 on Windows XP) Every once in a while I notice an odd character on certain web pages when browsing the web. It is a outline of a box with a 4-digit number inside. And example of a page that has these characters is: http://aws.amazon.com/ec2/#highlights After each section heading (Elastic, Completely Controlled, ...) I see a box with the number "0096" inside. I looked at the cached version on Google, and google has &ndash; in it's place, so I'm guessing I should be seeing a dash there instead of the box with the numbers in it. I have tried changing the character encoding in Firefox but haven't been able to find one that shows these characters correctly. Is there a way to allow Firefox to view these characters? Thanks in advance! Edit - adding a screen shot of the "special" characters: Edit #2 - tried in Ubuntu - new screenshots I logged into my Ubuntu desktop and browsed to the amazon page in Chrome and Firefox. Chrome completely ignores character, even if I inspect or view page source. Firefox in Unbutu displays the character exactly like Firefox on my Windows XP box. I copied the character and played around with it at the command line - here is a screenshot of the results: It looks like I can paste the character into this post as well: `` It is definitely not isolated to Windows XP. I tried setting the character encoding for my terminal to Windows 1252 (from Dennis' comment below), but then it just displays this character as a question mark. I pulled the webpage down with wget and with curl, and both outputs show this characters as: <96> It makes me wonder if this character renders correctly for anyone? It appears webkit just ignores it, my IE6 ignores it, Firefox displays the box with the numbers in it. I would have to imagine the design team at Amazon can see it correctly? It's not a huge deal to get these characters displaying correctly, but it would be nice to know if there is a solution to this.

  Read the article

• Troubleshooting unwanted NTP Traffic

  - by Jaxaeon

  A domain controller running Windows Server 2012 is sending NTP and NETBIOS traffic to an address that has never been configured as a time provider. The server logs give no indication that any NTP traffic is failing. The only place I see any evidence of this traffic is in pfSense system logs: (Blocked) Jun 9 08:48:50 DOMAIN 10.0.1.100:123 192.128.127.254:123 UDP (Blocked) Jun 9 08:48:53 DOMAIN 10.0.1.100:137 192.128.127.254:137 UDP As far as I can tell the NTP service is working normally otherwise: DC2.domain.com[10.0.1.101:123]: ICMP: 0ms delay NTP: -0.0131705s offset from DC1.domain.com RefID: DC1.domain.com [10.0.1.100] Stratum: 3 DC1.domain.com *** PDC ***[10.0.1.100:123]: ICMP: 0ms delay NTP: +0.0000000s offset from DC1.domain.com RefID: clock1.albyny.inoc.net [64.246.132.14] Stratum: 2 The time provider NtpClient is currently receiving valid time data from 1.pool.ntp.org,0×1 (ntp.m|0x0|0.0.0.0:123->204.2.134.163:123). The time provider NtpClient is currently receiving valid time data from 0.pool.ntp.org,0×1 (ntp.m|0x0|0.0.0.0:123->64.246.132.14:123). The time service is now synchronizing the system time with the time source 0.pool.ntp.org,0×1 (ntp.m|0x0|0.0.0.0:123->64.246.132.14:123). I've been inside and out of the NTP configuration and cannot find any reason for this traffic. Reverse DNS points the destination address to nothing.attdns.com. pinging nothing.attdns.com from the domain controller in question leads to a response from loopback (127.0.0.2) which makes my head hurt. Any ideas? EDIT1: It should probably be noted that after a dns flush, nslookup 192.128.127.254 returns nothing.attdns.com. 192.128.127.254 is not present in domain.com DNS records. The attdns.com domain is not present in cached lookups. 127.in-addr.arpa is clean of any funkyness. EDIT2: The loopback ping response from nothing.attdns.com is possibly unrelated. Machines on other networks are also displaying this behavior. EDIT3: As mentioned in the comments, I tracked the problem network adapter back to my pfSense VM hosted in esxi 5.5 (I know shame on me for virtualizing a firewall). pfSense was configured to use DC1.domain.com as its primary time provider, but upon changing it back to pool.ntp.org the problem persists. pfSense logs give no indication of NTP misconfiguration. Everywhere I can think to look this VM is identified as 10.0.1.253, so I still have no idea why it’s sending NTP requests as 192.128… Since this firewall was a temporary solution to a problem that no longer exists so I am going to decommission it. EDIT4: The queries were coming from another machine sharing the same virtual adapter as the firewall. The machine has two local adapters: one for LAN, and the other for attached hardware that uses an Ethernet connection. That hardware sits in the the mystery subnet, and the machine is broadcasting NTP requests over both adapters.

  Read the article

• Crash in audio resampler with some audio rates - FFMPEG PHP ( Solved! )

  - by Olaf Erlandsen

  i have a problem with this command( FFMPEG PHP ): Command: ffmpeg -i 62f76f050494f0ed6a5997967c00c0c0.wmv -ss 0 -t 99 -y -ar 44100 -async 44100 -r 29.970 -ac 2 -qscale 5 -f flv 62f76f050494f0ed6a5997967c00c0c0.flv Output: FFmpeg version 0.6.5, Copyright (c) 2000-2010 the FFmpeg developers built on Jan 29 2012 17:52:15 with gcc 4.4.5 20110214 (Red Hat 4.4.5-6) configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --disable-avisynth --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -fPIC' --enable-avfilter --enable-avfilter-lavf --enable-libdc1394 --enable-libdirac --enable-libfaac --enable-libfaad --enable-libfaadbin --enable-libgsm --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-vdpau --enable-version3 --enable-x11grab libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.19. 0 / 1.19. 0 libswscale 0.11. 0 / 0.11. 0 libpostproc 51. 2. 0 / 51. 2. 0 [asf @ 0xe81670]max_analyze_duration reached Input #0, asf, from '/var/www/resources/tmp/62f76f050494f0ed6a5997967c00c0c0.wmv': Metadata: WMFSDKVersion : 12.0.7601.17514 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:00:50.87, bitrate: 2467 kb/s Stream #0.0: Audio: wmapro, 44100 Hz, stereo, flt, 256 kb/s Stream #0.1: Video: vc1, yuv420p, 950x460 [PAR 1:1 DAR 95:46], 25 fps, 25 tbr, 1k tbn, 25 tbc Output #0, flv, to '/var/www/resources/media/62f76f050494f0ed6a5997967c00c0c0.flv': Metadata: encoder : Lavf52.64.2 Stream #0.0: Video: flv, yuv420p, 950x460 [PAR 1:1 DAR 95:46], q=2-31, 200 kb/s, 1k tbn, 29.97 tbc Stream #0.1: Audio: libmp3lame, 11025 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.1 -> #0.0 Stream #0.0 -> #0.1 Press [q] to stop encoding frame= 72 fps= 0 q=5.0 size= 0kB time=10.91 bitrate= 0.0kbits/s Multiple frames in a packet from stream 0 Warning, using s16 intermediate sample format for resampling frame= 141 fps=139 q=5.0 size= 103kB time=8.15 bitrate= 103.2kbits/s frame= 220 fps=144 q=5.0 size= 875kB time=10.92 bitrate= 656.6kbits/s frame= 290 fps=143 q=5.0 size= 1525kB time=13.74 bitrate= 909.1kbits/s frame= 356 fps=141 q=5.0 size= 2153kB time=15.99 bitrate=1103.1kbits/s frame= 427 fps=141 q=5.0 size= 2847kB time=18.70 bitrate=1247.0kbits/s frame= 497 fps=141 q=5.0 size= 3771kB time=21.16 bitrate=1460.0kbits/s frame= 575 fps=142 q=5.0 size= 4695kB time=24.61 bitrate=1563.0kbits/s frame= 639 fps=141 q=5.0 size= 5301kB time=26.80 bitrate=1620.2kbits/s frame= 703 fps=139 q=5.0 size= 5829kB time=29.36 bitrate=1626.2kbits/s frame= 774 fps=139 q=5.0 size= 6659kB time=32.39 bitrate=1684.0kbits/s frame= 842 fps=139 q=5.0 size= 7915kB time=35.27 bitrate=1838.6kbits/s frame= 911 fps=139 q=5.0 size= 9011kB time=37.98 bitrate=1943.4kbits/s frame= 975 fps=138 q=5.0 size= 9788kB time=40.59 bitrate=1975.3kbits/s frame= 1041 fps=138 q=5.0 size= 10904kB time=43.83 bitrate=2037.9kbits/s frame= 1115 fps=138 q=5.0 size= 11795kB time=46.24 bitrate=2089.8kbits/s frame= 1183 fps=138 q=5.0 size= 12678kB time=48.74 bitrate=2130.7kbits/s frame= 1247 fps=137 q=5.0 size= 13964kB time=51.36 bitrate=2227.5kbits/s frame= 1271 fps=136 q=5.0 Lsize= 15865kB time=58.86 bitrate=2208.1kbits/s video:15366kB audio:462kB global headers:0kB muxing overhead 0.238956% Problem: Warning, using s16 intermediate sample format for resampling I've also tried changing the parameter From -ar 44100 to -ar 11025 Thanks! Solution: Read this link: http://en.wikipedia.org/wiki/MP3#Bit_rate

  Read the article

< Previous Page | 979 980 981 982 983 984 985 986 987 988 989 990  | Next Page >