Daily Archives

Articles indexed Friday March 19 2010

Page 120/124 | < Previous Page | 116 117 118 119 120 121 122 123 124  | Next Page >

  • Port Forwarding IPTABLES public IP

    - by tric
    hello i have a computer linuxbox_1.eth0 public ip 89.40.x.y eth1 public ip 85.121.a.b i have another linuxbox_2. ethx public ip 86.34.c.d what i want to do is forward port 8001 from linuxbox_1 eth0 89.40.x.y:8001 to linuxbox_1 eth1 85.121.a.b, and then forward again port 8001 from linuxbox_1 eth1 85.121.a.b:8001 to linuxbox_2 ethx 86.34.c.d:80 i have searched for answers using google "that knows everything" but this time it has failed. i would like to use IPTABLES or any other tool like rinetd. i tryed rinetd but it somehow mistakes the eths sorry for my bad english. 10q

    Read the article

  • Possible to IPSec VPN Tunnel Public IP Addresses?

    - by caleban
    A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

    Read the article

  • Web-based (intranet / non-hosted) timesheet / project tracking tools

    - by warren
    I realize some similar questions have been asked along these lines before, but from reading-through them today, it appears they don't match my use case. I am looking for a web-based, non-hosted time and project tracking tool. I've downloaded Collabtive and Achievo so far, but am looking for other suggestions, too. My list of requirements: runs on standard LAMP stack non-hosted (ie, there is an option to download and run it on a local server) not a desktop/single-user application easy-to-use - my audience is a mix of technical and non-technical folks easy to maintain - when time for upgrading comes, I'd really like to not have to rebuild the app (a la ./configure ; make ; make install) needs to support multiple users free-form project additions: we don't have a central project management authority (users should be able to add whatever they're working on, not merely from a drop-down) Does anyone here have experience with such tools? It doesn't have to be free.. but free is always nice :)

    Read the article

  • Route specific HTTP requests through pfSense OpenVPN

    - by DennisQ
    Hi, to start, I have very little knowledge on routes, iptables, etc. That said, here's what I'm trying to accomplish and where I think I'm stumped: Problem: We have an external website which we recently firewalled so it only accepts traffic from our office IP addresses. This works well at the office, but doesn't work for remote access through VPN as we don't route all traffic through OpenVPN. I would rather avoid forcing everyone to route all traffic through just to accommodate this one site. Environment: Main router box is running pfSense. Em0 is internal IP, Em1 is external. Internal net is 10.23.x and VPN is 10.0.8.0/24 I believe what I need to do is add a route to the VPN server config to send all traffic to that IP over the VPN tunnel. I think that part's working, but I don't get a response back, so I'm assuming that I need some NAT config on the VPN server to route the response back over the tunnel? What I've found so far is to try the following, but since this is a pfSense box on FreeBSD, I can't run iptables, etc. Make sure ip forwarding is enabled: echo 1 /proc/sys/net/ipv4/ip_forward Setup NAT back out: iptables -t nat -A POSTROUTING -s 10.0.8.0/24 -o em0 -j MASQUERADE Am I on the right path, and if so how do I accomplish this through pfSense UI or FreeBSD CLI? Thanks!

    Read the article

  • 3ds Max with Parallels on a MacBook Pro

    - by Eric Koslow
    I am trying to get 3ds Max to run under Parallels on my 15'' MacBook Pro, but it is ultimatly failing. To get any decent frame rate I have to put all the setting to low, but even then I get weird graphical "gliches" when I play. Controlls are unresponsive and very laggy as well. I have increased the video memory to 256mb, but that doesn't seem to have helped. What else should I do to make the game playable? Mod-edit: I changed TF2 with a "random" 3D modelling software, which solves gaming related issues.

    Read the article

  • Google quitterait la Chine dès le 10 avril et l'annoncerait lundi, selon une source proche du dossie

    Mise à jour du 19 03 2010 par Katleen Google quitterait la Chine dès le 10 avril et l'annoncerait lundi, selon une source proche du dossier Une nouvelle source anonyme vient d'évoquer le possible départ de Google avec, cette fois, une date précise de cessation d'activités. D'après un collaborateur de la firme de Mountaiw View, "Google quitterait la Chine le 10 avril, mais Google n'a pas confirmé l'information pour le moment". Ce témoignage a été reccueilli par CBN (China Business News), et annonce une prise de parole officielle de Google pour expliquer l'organisation de ce départ dès lundi. A suivre donc. Mise ...

    Read the article

  • Visual Source Safe on Mac OS X

    - by Jonathan Badeen
    Is there an application or API for using/accessing Visual SourceSafe (6.0) under Mac OS X? I'm currently using VSS Connect under Parallels for working with our company's ASP.NET site/s. I currently have my Windows drive shared and try to use TextMate on the Mac side to actually edit files. It would be nice to have the ability to check files in/out outside of my virtual machine though.

    Read the article

  • CSV parser in C++

    - by User1
    All I need is a good CSV file parser for C++. At this point it can really just be a comma-delimited parser (ie don't worry about escaping new lines and commas). The main need is a line-by-line parser that will return a vector for the next line each time the method is called. I found this article which looks quite promising: http://www.boost.org/doc/libs/1_35_0/libs/spirit/example/fundamental/list_parser.cpp I've never used Boost's Spirit, but am willing to try it. Is it overkill/bloated or is it fast and efficient? Does anyone have faster algorithms using STL or anything else? Thanks!

    Read the article

  • Avoiding Duplicate Data in DB (for use with Rails)

    - by ants
    I have five tables that I am trying to get to work nicely together but may need some help. I have three main tables: accounts members and roles. With two join tables account_members and account_member_roles. The accounts and members table are joined by account_members (fk account_id and member_id) table. The other 2 tables are the problem (roles and account_member_roles). A member of an account can have more than one role and I have the account_member_roles (fk account_member_id and role_id) table joining the account_members join table and the roles table. That seems logical but can you have a relationship with a join table? What I'd like to be able to do is when creaeting an account, for instance, I would like @account.save to include the roles and update the account_member_roles table neatly ..... but through the account_members join table. I've tried ..... accept_nested_attributes_for :members, :account_member_roles in the account.rb but I get ..... ActiveRecord::HasManyThroughCantAssociateThroughHasManyReflection (Cannot modify association 'Account#account_member_roles' because the source reflection class 'AccountMemberRole' is associated to 'AccountMember' via :has_many.) upon trying to save a record. Any advice on how I should approach this? CIA -ants

    Read the article

  • Visual Studio 2010 : Cant change target. Gives TargetFrameworkMoniker Error.

    - by maxima120
    I have a console application which has target .NET 2.0 It is very short but full of unsafe code. I converted it to VS 2010. I run it OK. When I try to change "target framework" in properties to 3.5 or 4.0 it shows message box: TargetFrameworkMoniker: Error parsing application configuration file at line 0. XML document must have a top level element. the target then stays 2.0 anyway... Any thoughts?

    Read the article

  • How to look up an NHibernate entity's table mapping from the type of the entity?

    - by snicker
    Once I've mapped my domain in NHibernate, how can I reverse lookup those mappings somewhere else in my code? Example: The entity Pony is mapped to a table named "AAZF1203" for some reason. (Stupid legacy database table names!) I want to find out that table name from the NH mappings using only the typeof(Pony) because I have to write a query elsewhere. How can I make the following test pass? private const string LegacyPonyTableName = "AAZF1203"; [Test] public void MakeSureThatThePonyEntityIsMappedToCorrectTable() { string ponyTable = GetNHibernateTableMappingFor(typeof(Pony)); Assert.AreEqual(LegacyPonyTableName, ponyTable); } In other words, what does the GetNHibernateTableMappingFor(Type t) need to look like?

    Read the article

  • Best open source alternative for MS Visual Source Safe?

    - by afsharm
    We are leaving VSS for TFS or any other alternatives. I'm the one who persists to go for an open source alternative like SVN. Now I'm searching for a good open source Version Control regarding following aspects: We are in love with open source movement and cross-platform. Could it be possible to use it with Mono, SharpDevelop and Express editions of VS instead of Visual Studio itself? What about backup? Is it integrated with VS without serious problems? Any API or command prompt access? Please notice I've read following previous texts about it but still need more help: http://stackoverflow.com/questions/690766/vss-or-svn-for-a-net-project http://stackoverflow.com/questions/61959/tfs-vs-open-source-alternatives http://stackoverflow.com/questions/44588/how-to-convince-a-company-to-switch-their-source-control

    Read the article

  • ABSMIDDLE works differently on firefox and chrome?

    - by Axel
    Hi, i have an icon image and text like the following, the code source of everything is : <img src="...." align="absmiddle" /> My Title Here The problem is that the icon is not aligned vertically with the title in chrome better than firefox. I think the absmiddle doesn't work at all ! is there any solution, i don't want to use a table with 2 columns to fix this issue. Thanks

    Read the article

  • How can install sqlite-ruby on linux when sqlite3 is not in /usr/local ?

    - by Charles
    I am trying to install sqlite3 and sqlite-ruby (ruby 1.8.6) on a linux box where I do not have root. I downloaded the sqlite3 source, binaries, and shared library and placed them all in a directory called sqlite3 I then try to install sqlite-ruby using gem install sqlite-ruby --with-sqlite-dir=the_path_sqlite/sqlite3 but I keep getting the error... checking for main() in -lsqlite... no checking for sqlite.h... no * extconf.rb failed * Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/data/scratch/bettbra/common/packages/ruby-1.8.6/bin/ruby --with-sqlite-dir --with-sqlite-include --without-sqlite-include=${sqlite-dir}/include --with-sqlite-lib --without-sqlite-lib=${sqlite-dir}/lib --with-sqlitelib --without-sqlitelib

    Read the article

  • referencing an instantiated object in another class in objective C

    - by Paul
    hi, I am working in xcode on an ipod app in objective C, and I have a field (navigationController) in one of my classes (rootViewController). How do I reference the instantiated rootViewController's navigationController from another class? For example, how would I do this if I want to reference the navigationController from the FirstViewController.m class? I seem to only be able to find references for this to reference the application delegate. If I want to reference the application delegate with FirstViewController, I just say: MyAppDelegate *delegate = [[UIApplication sharedApplication] delegate]; [delegate.navigationController pushViewController:childController animated:YES]; how do I do this for the rootViewController class instead of MyAppDelegate?

    Read the article

  • how to make a small image become really huge

    - by DennyHalim.com
    all webmaster should already know about hotlinking stuffs. and we know how to ban those bad referer too... but i want to get revenge... i want to replace the hotlinked images with one huge image with few megs in size. i have found one good image. yet it less than 100k. i already use it to replace all bad hotlinkers. how can i convert this image to become few megs?

    Read the article

  • GROUP BY and SUM distinct date across 2 tables

    - by kenitech
    I'm not sure if this is possible in one mysql query so I might just combine the results via php. I have 2 tables: 'users' and 'billing' I'm trying to group summed activity for every date that is available in these two tables. 'users' is not historical data but 'billing' contains a record for each transaction. In this example I am showing a user's status which I'd like to sum for created date and deposit amounts that I would also like to sum by created date. I realize there is a bit of a disconnect between the data but I'd like to some all of it together and display it as seen below. This will show me an overview of all of the users by when they were created and what the current statuses are next to total transactions. I've tried UNION as well as LEFT JOIN but I can't seem to get either to work. Union example is pretty close but doesn't combine the dates into one row. ( SELECT created, SUM(status) as totalActive, NULL as totalDeposit FROM users GROUP BY created ) UNION ( SELECT created, NULL as totalActive, SUM(transactionAmount) as totalDeposit FROM billing GROUP BY created ) I've also tried using a date lookup table and joining on the dates but the SUM values are being added multiple times. note: I don't care about the userIds at all but have it in here for the example. users table (where status of '1' denotes "active") (one record for each user) created | userId | status 2010-03-01 | 10 | 0 2010-03-01 | 11 | 1 2010-03-01 | 12 | 1 2010-03-10 | 13 | 0 2010-03-12 | 14 | 1 2010-03-12 | 15 | 1 2010-03-13 | 16 | 0 2010-03-15 | 17 | 1 billing table (record created for every instance of a billing "transaction" created | userId | transactionAmount 2010-03-01 | 10 | 50 2010-03-01 | 18 | 50 2010-03-01 | 19 | 100 2010-03-10 | 89 | 55 2010-03-15 | 16 | 50 2010-03-15 | 12 | 90 2010-03-22 | 99 | 150 desired result: created | sumStatusActive | sumStatusInactive | sumTransactions 2010-03-01 | 2 | 1 | 200 2010-03-10 | 0 | 1 | 55 2010-03-12 | 2 | 0 | 0 2010-03-13 | 0 | 0 | 0 2010-03-15 | 1 | 0 | 140 2010-03-22 | 0 | 0 | 150 Table dump: CREATE TABLE IF NOT EXISTS `users` ( `created` date NOT NULL, `userId` int(11) NOT NULL, `status` smallint(6) NOT NULL ) ENGINE=MyISAM DEFAULT CHARSET=latin1; INSERT INTO `users` (`created`, `userId`, `status`) VALUES ('2010-03-01', 10, 0), ('2010-03-01', 11, 1), ('2010-03-01', 12, 1), ('2010-03-10', 13, 0), ('2010-03-12', 14, 1), ('2010-03-12', 15, 1), ('2010-03-13', 16, 0), ('2010-03-15', 17, 1); CREATE TABLE IF NOT EXISTS `billing` ( `created` date NOT NULL, `userId` int(11) NOT NULL, `transactionAmount` int(11) NOT NULL ) ENGINE=MyISAM DEFAULT CHARSET=latin1; INSERT INTO `billing` (`created`, `userId`, `transactionAmount`) VALUES ('2010-03-01', 10, 50), ('2010-03-01', 18, 50), ('2010-03-01', 19, 100), ('2010-03-10', 89, 55), ('2010-03-15', 16, 50), ('2010-03-15', 12, 90), ('2010-03-22', 99, 150);

    Read the article

  • Why does `Array(0,1,2) == Array(0,1,2)` not return the expected result?

    - by soc
    As far as I understand, Scala's == defines the natural equality of two objects. I expected that Array(0,1,2) == Array(0,1,2) compares the natural equality e. g. checks if all elements of the array return true when compared with the corresponding elements of the other array. People told me that Scala's Array is just a Java [] which only compares identity. But Scala's String is also just a Java String but Scala overrides equals to compare natural equality. I wonder why Array's equals method was not overridden, too. Thank you for your thoughts!

    Read the article

  • Why does PEAR get installed to my user directory?

    - by webworm
    I am new to Linux and I am attempting to install the PHP PEAR library on a virtual server which is running Ubuntu. I am following a tutorial that covers installing PEAR but have run up against an area where I am confused. When running the PEAR installation program I am prompted as to what I want the INSTALL_PREFIX to be. Evidently the INSTALL_PREFIX, among other things, determines where PEAR will be installed. The tutorial suggest the value of INSTALL_PREFIX be the following path ... "/home/MY_USER_NAME/pear" where MY_USER_NAME = my user account Having come from a Windows world, applications are installed on the system where everyone can use them. If I install PEAR underneath my user directory will other developers on the system be able to make use of PEAR in their PHP scripts? I want to make PEAR available to all users and not just myself. Could someone explain to me the difference between installing for all users and installing just for myself? Does the install location matter? Should I be installing PEAR in a different location? Thanks for any suggestions. P.S. The tutorial I am following is located at the following URL ... http://articles.sitepoint.com/article/getting-started-with-pear/2

    Read the article

  • mySQL query not returning correct results!

    - by Pete Herbert Penito
    Hi! This query that I have is returning therapists whose 'therapistTable.activated' is equal to false as well as those set to true! so it's basically selecting all of the db, any advice would be appreciated! ` $query = "SELECT therapistTable.* FROM therapistTable WHERE therapistTable.activated = 'true' ORDER BY therapistTable.distance "; `

    Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124  | Next Page >