Monthly Archives

Articles indexed in March 2012

Page 186/239 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

  • Image upload not functioning correctly

    - by PurpleSmurf
    I'm still trying to get to grips with PHP, and I'm trying to make a form that uploads a picture to a database. I don't have permissions for move_uploaded_file so I'm using the copy() as an alternative. Everywhere I've seen experiencing similar problems have all been with move_uploaded_file so I'm rather stuck. Trying to copy the image from the desktop doesn't seem to be working, it's not throwing up any more PHP errors but is displaying the error message for if something goes wrong. The form sends data to two tables in the database but I'm mainly concerned with the upload not working. There's over 200 lines so I'll post a snippet of the upload code, thank you in advance: function getExtension($str) { $i = strrpos($str,"."); if (!$i) { return ""; } $l = strlen($str) - $i; $ext = substr($str,$i+1,$l); return $ext; } //This variable is used as a flag. The value is initialized with 0 (meaning no error found) and it will be changed to 1 if an errro occures. If the error occures the file will not be uploaded. $errors=0; //checks if the form has been submitted if(isset($_POST['submitted'])) { //reads the name of the file the user submitted for uploading $image=$_FILES['image']['name']; //if it is not empty if ($image) { //get the original name of the file from the clients machine $filename = stripslashes($_FILES['image']['name']); //get the extension of the file in a lower case format $extension = getExtension($filename); $extension = strtolower($extension); //if it is unknown extension, class as an error and do not upload the file, otherwise continue if (($extension != "jpg") && ($extension != "jpeg") && ($extension != "png") && ($extension != "gif")) { //print error message echo '<h1>Unknown extension!</h1>'; $errors=1; } else { //get the size of the image in bytes //$_FILES['image']['tmp_name'] is the temporary filename of the file in which the uploaded file was stored on the server $size=filesize($_FILES['image']['tmp_name']); //give an unique name, for example the time in unix time format $image_name=time().'.'.$extension; //the new name will be containing the full path where will be stored (images folder) $newname="/home/k0929907/www/uploads/".$image_name; //verify if the image has been uploaded, and print error instead $copied = copy($_FILES['image']['tmp_name'], $newname); if (!$copied) { echo '<h1>Copy unsuccessfull!</h1>'; $errors=1; } } } }

    Read the article

  • Override ToString() in your Classes

    - by psheriff
    One of the reasons I love teaching is because of the questions that I get from attendees. I was giving a presentation at DevConnections and was showing a collection of Product objects. When I hovered over the variable that contained the collection, it looked like Figure 2. As you can see in the collection, I have actual product names of my videos from www.pdsa.com/videos being displayed. To get your data to appear in the data tips you must override the ToString() method in your class. To illustrate this, take the following simple Product class shown below: public class Product{  public string ProductName { get; set; }  public int ProductId { get; set; }} This class does not have an override of the ToString() method so if you create a collection of Product objects you will end up with data tips that look like Figure 1. Below is the code I used to create a collection of Product objects. I have shortened the code in this blog, but you can get the full source code for this sample by following the instructions at the bottom of this blog entry. List<Product> coll = new List<Product>();Product prod; prod = new Product()  { ProductName = "From Zero to HTML 5 in 60 Minutes",     ProductId = 1 };coll.Add(prod);prod = new Product()   { ProductName = "Architecting Applications …",     ProductId = 2 };coll.Add(prod);prod = new Product()  { ProductName = "Introduction to Windows Phone Development",    ProductId = 3 };coll.Add(prod);prod = new Product()   { ProductName = "Architecting a Business  …",     ProductId = 4 };coll.Add(prod);......   Figure 1: Class without overriding ToString() Now, go back to the Product class and add an override of the ToString() method as shown in the code listed below: public class Product{  public string ProductName { get; set; }  public int ProductId { get; set; }   public override string ToString()  {    return ProductName;  }} In this simple sample, I am just returning the ProductName property. However, you can create a whole string of information if you wish to display more data in your data tips. Just concatenate any properties you want from your class and return that string. When you now run the application and hover over the collection object you will now see something that looks like Figure 2. Figure 2: Overriding ToString() in your Class Another place the ToString() override comes in handy is if you forget to use a DisplayMemberPath in your ListBox or ComboBox. The ToString() method is called automatically when a class is bound to a list control. Summary You should always override the ToString() method in your classes as this will help you when debugging your application. Seeing relevant data immediately in the data tip without having to drill down one more layer and maybe scroll through a complete list of properties should help speed up your development process. NOTE: You can download the sample code for this article by visiting my website at http://www.pdsa.com/downloads. Select “Tips & Tricks”, then select “Override ToString” from the drop down list.  

    Read the article

  • SSH port forwarding through Windows machine

    - by Leonardo Ramé
    is it possible to connect to an SSH server only accessible from inside a network, using a Windows machine without SSH as a gateway?. Let me clarify my question with a sketch: Me (Linux machine)--- WIN (Windows without SSHD)---LIN (Linux with SSHD). Machine Me, is the PC I'm using to connect to LIN through WIN. WIN is accessible from the outside, it has an RDESKTOP port open, and LIN is only accessible from inside the network. Hope you understand the question.

    Read the article

  • logfile deleted on Oracle database how to re-create it?

    - by Daniel
    for my database assignment we were looking into 'database corruption' and I was asked to delete the second redo log file which I have done with the command: rm log02a.rdo this was in the $HOME/ORADATA/u03 directory. Now I started up my database using startup pfile=$PFILE nomount then I mounted it using the command alter database mount; now when I try to open it alter database open; it gives me the error: ORA-03113: end-of-file on communication channel Process ID: 22125 Session ID: 25 Serial number: 1 I am assuming this is because the second redo log file is missing. There is still log01a.rdo, but not the one I have deleted. How can I go about recovering this now so that I can open my database again? I have looked into the database created scripts, and it specified the log02a.rdo file to be size 10M and part of group 2. If I do select group#, member from v$logfile; I get: 1 /oradata/student_db/user06/ORADATA/u03/log01a.rdo 2 /oradata/student_db/user06/ORADATA/u03/log02a.rdo 3 /oradata/student_db/user06/ORADATA/u03/log03a.rdo 4 /oradata/student_db/user06/ORADATA/u03/log04a.rdo So it is part of group 2. If I try to add the log02a.rdo file again "already part of the database". If I drop group 2 and then add it again with these commands: ALTER DATABASE ADD LOGFILE GROUP 2 ('$HOME/ORADATA/u03/log02a.rdo') SIZE 10M; Nothing. Supposedly alters the database, but it still won't start up. Any ideas what I can do to re-create this and be able to open my database again?

    Read the article

  • Why does SQL 2005 SSIS component install fail?

    - by Ducain
    I am trying to install SSIS on our production SQL 2005 SP2 box. Each time I try, the install/setup screen results in failure, starting with the native client, and moving on down. Screen shots below show what I see: Here is the result of clicking on the status link to the right of the native client after the install failed: === Verbose logging started: 3/28/2012 16:38:08 Build type: SHIP UNICODE 3.01.4000.4042 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe === MSI (c) (DC:00) [16:38:08:875]: Resetting cached policy values MSI (c) (DC:00) [16:38:08:875]: Machine policy value 'Debug' is 0 MSI (c) (DC:00) [16:38:08:875]: ******* RunEngine: ******* Product: {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} ******* Action: ******* CommandLine: ********** MSI (c) (DC:00) [16:38:08:875]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (DC:00) [16:38:08:875]: Grabbed execution mutex. MSI (c) (DC:00) [16:38:08:875]: Cloaking enabled. MSI (c) (DC:00) [16:38:08:875]: Attempting to enable all disabled priveleges before calling Install on Server MSI (c) (DC:00) [16:38:08:875]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (90:F0) [16:38:08:875]: Grabbed execution mutex. MSI (s) (90:D4) [16:38:08:875]: Resetting cached policy values MSI (s) (90:D4) [16:38:08:875]: Machine policy value 'Debug' is 0 MSI (s) (90:D4) [16:38:08:875]: ******* RunEngine: ******* Product: {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} ******* Action: ******* CommandLine: ********** MSI (s) (90:D4) [16:38:08:875]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (90:D4) [16:38:08:890]: Warning: Local cached package 'C:\WINDOWS\Installer\65eb99.msi' is missing. MSI (s) (90:D4) [16:38:08:890]: User policy value 'SearchOrder' is 'nmu' MSI (s) (90:D4) [16:38:08:890]: User policy value 'DisableMedia' is 0 MSI (s) (90:D4) [16:38:08:890]: Machine policy value 'AllowLockdownMedia' is 0 MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Media enabled only if package is safe. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Looking for sourcelist for product {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Adding {F9B3DD02-B0B3-42E9-8650-030DFF0D133D}; to potential sourcelist list (pcode;disk;relpath). MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Now checking product {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Media is enabled for product. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Attempting to use LastUsedSource from source list. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Trying source C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Source is invalid due to invalid package code (product code doesn't match). MSI (s) (90:D4) [16:38:08:890]: Note: 1: 1706 2: -2147483646 3: sqlncli.msi MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Processing net source list. MSI (s) (90:D4) [16:38:08:890]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Processing media source list. MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Trying media source F:\. MSI (s) (90:D4) [16:38:09:921]: Note: 1: 2203 2: F:\sqlncli.msi 3: -2147287038 MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Processing URL source list. MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1402 2: UNKNOWN\URL 3: 2 MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1706 2: 3: sqlncli.msi MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Failed to resolve source MSI (s) (90:D4) [16:38:09:921]: MainEngineThread is returning 1612 MSI (c) (DC:00) [16:38:09:921]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (DC:00) [16:38:09:921]: MainEngineThread is returning 1612 === Verbose logging stopped: 3/28/2012 16:38:09 === Here is the log visible when I click the failed status for MSXML6: === Verbose logging started: 3/28/2012 16:38:12 Build type: SHIP UNICODE 3.01.4000.4042 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe === MSI (c) (DC:58) [16:38:12:250]: Resetting cached policy values MSI (c) (DC:58) [16:38:12:250]: Machine policy value 'Debug' is 0 MSI (c) (DC:58) [16:38:12:250]: ******* RunEngine: ******* Product: {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} ******* Action: ******* CommandLine: ********** MSI (c) (DC:58) [16:38:12:250]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (DC:58) [16:38:12:250]: Grabbed execution mutex. MSI (c) (DC:58) [16:38:12:250]: Cloaking enabled. MSI (c) (DC:58) [16:38:12:250]: Attempting to enable all disabled priveleges before calling Install on Server MSI (c) (DC:58) [16:38:12:250]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (90:58) [16:38:12:265]: Grabbed execution mutex. MSI (s) (90:DC) [16:38:12:265]: Resetting cached policy values MSI (s) (90:DC) [16:38:12:265]: Machine policy value 'Debug' is 0 MSI (s) (90:DC) [16:38:12:265]: ******* RunEngine: ******* Product: {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} ******* Action: ******* CommandLine: ********** MSI (s) (90:DC) [16:38:12:265]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (90:DC) [16:38:12:265]: Warning: Local cached package 'C:\WINDOWS\Installer\ce6d56e.msi' is missing. MSI (s) (90:DC) [16:38:12:265]: User policy value 'SearchOrder' is 'nmu' MSI (s) (90:DC) [16:38:12:265]: User policy value 'DisableMedia' is 0 MSI (s) (90:DC) [16:38:12:265]: Machine policy value 'AllowLockdownMedia' is 0 MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Media enabled only if package is safe. MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Looking for sourcelist for product {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Adding {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA}; to potential sourcelist list (pcode;disk;relpath). MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Now checking product {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Media is enabled for product. MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Attempting to use LastUsedSource from source list. MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Trying source d:\2a2ac35788eea9066bae01\. MSI (s) (90:DC) [16:38:12:265]: Note: 1: 2203 2: d:\2a2ac35788eea9066bae01\msxml6.msi 3: -2147287037 MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (90:DC) [16:38:12:265]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Processing net source list. MSI (s) (90:DC) [16:38:12:265]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Processing media source list. MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Trying media source F:\. MSI (s) (90:DC) [16:38:12:296]: Note: 1: 2203 2: F:\msxml6.msi 3: -2147287038 MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Processing URL source list. MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1402 2: UNKNOWN\URL 3: 2 MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1706 2: 3: msxml6.msi MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Failed to resolve source MSI (s) (90:DC) [16:38:12:296]: MainEngineThread is returning 1612 MSI (c) (DC:58) [16:38:12:296]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (DC:58) [16:38:12:296]: MainEngineThread is returning 1612 === Verbose logging stopped: 3/28/2012 16:38:12 === When I click on the failed status for SSIS, no log file appears at all. To be honest, I'm not even sure where to start on this one - never guessed it would be so much trouble to add a component right from the disk. Any help or pointers whatsoever would be greatly appreciated. If any more details are needed, please ask - I'd be glad to add them.

    Read the article

  • Authenticate Teamcity against LDAP using StartTLS

    - by aseq
    I am running a 6.5 version of Teamcity on a Debian Squeeze server and I use OpenLDAP to authenticate users. I know I can use LDAPS to be able to use encrypted password authentication, however this has been deprecated by the OpenLDAP developers, see: http://www.openldap.org/faq/data/cache/605.html I would like to know if there is a way to configure LDAP authentication in Teamcity to use StartTLS on port 389. I can't find anything about it here: http://confluence.jetbrains.net/display/TCD65/LDAP+Integration Or here: http://therightstuff.de/2009/02/02/How-To-Set-Up-Secure-LDAP-Authentication-With-TeamCity.aspx

    Read the article

  • Iozone: sensible settings for a server with lots of RAM

    - by Frank Brenner
    I have just acquired a server with: 2x quadcore Xeons 48G ECC RAM 5x 160GB SSDs on an LSI 9260-8i Before deploying the target platform, I'd like to collect as much benchmark data as possible, testing I/O with hardware RAID in various configurations, ZFS zRAID, as well as I/O performance on vSphere and with KVM virtualization. In order to see real disk I/O performance without cache effects, I tried running Iozone with a maximum file of more than twice the physical RAM as recommended in the documentation, so: iozone -a -g100G However, as one might expect, this takes far too long to be practicable. (I stopped the run after seven hours..) I'd like to reduce the range of record and file sizes to values that might reflect realistic performance for an application server, hopefully getting the run times to under an hour or so. Any ideas? Thanks.

    Read the article

  • Permission denied (publickey,gssapi-with-mic,password) ssh error

    - by zentenk
    Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

    Read the article

  • Sun-JRE on CentOS-4.8 RPM error: post-install scriptlet failed, exit status 5

    - by Emyr
    I have a server with CentOS 4.8 installed. The provided is rubbish, but there's only a few months left, and they're busy being sued by Chase bank, so I doubt I can get CentOS 5. I wiped the server clean using Virtuozzo, and found that the default image is VERY empty. I even had to install yum myself. I've reached the point where I want to install TomCat. I downloaded the Sun JRE as a .rpm.bin file, did chmod a+x and ran it. That produced a .rpm file, which I tried installing: [root@host java]# rpm -Uvh jre-6u20-linux-i586.rpm Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... jsse.jar... charsets.jar... localedata.jar... plugin.jar... javaws.jar... deploy.jar... error: %post(jre-1.6.0_20-fcs.i586) scriptlet failed, exit status 5 [root@host java]# rpm -qi jre Name : jre Relocations: /usr/java Version : 1.6.0_20 Vendor: Sun Microsystems, Inc. Release : fcs Build Date: Mon Apr 12 19:34:13 2010 Install Date: Thu May 6 06:36:17 2010 Build Host: jdk-lin-1586 Group : Development/Tools Source RPM: jre-1.6.0_20-fcs.src.rpm Size : 50708634 License: Sun Microsystems Binary Code License (BCL) Signature : (none) Packager : Java Software <[email protected]> URL : http://java.sun.com/ Summary : Java(TM) Platform Standard Edition Runtime Environment Description : The Java Platform Standard Edition Runtime Environment (JRE) contains everything necessary to run applets and applications designed for the Java platform. This includes the Java virtual machine, plus the Java platform classes and supporting files. The JRE is freely redistributable, per the terms of the included license. [root@host java]# I couldn't find any results on Google for any parts of that error message, and I have very little experience of rpm (I usually use Debian). Is this a broken package, or am I missing something or some setting?

    Read the article

  • Puppet: hanging at Schedule[weekly]

    - by Andrei Serdeliuc
    Why would puppet hang at Schedule[weekly]? I'm running puppet in a masterless setup, so to apply by manifest I'm just running puppet apply /etc/puppet/manifests/site.pp In debug mode, these are the last things it says before it just hangs debug: /Schedule[never]: Skipping device resources because running on a host debug: /Schedule[daily]: Skipping device resources because running on a host debug: /Schedule[monthly]: Skipping device resources because running on a host debug: /Schedule[puppet]: Skipping device resources because running on a host debug: /Schedule[hourly]: Skipping device resources because running on a host debug: /Schedule[weekly]: Skipping device resources because running on a host If I send a SIGINT, it says Exiting debug: Storing state debug: Stored state in 0.03 seconds debug: Finishing transaction 69992657242500 Thanks

    Read the article

  • What is the best server or Ip address to use for prolonged testing?

    - by eldorel
    I usually run uptime/latency tests against (and from) two servers that we own at different sites and until recently I've used the google dns servers as a control group. However, I've realized there is a potential problem with monitoring latency over extended periods of time. Almost all of the major service providers are using ANYCAST. For short tests this doesn't matter, but I need to run a set of tests for at least a week to try and catch an intermittent problem, and a change in the anycast priority while trying to test latency will cause the latency values for that server to change accordingly. Since I'm submitting graphs of this data to the ISP, I need to avoid/account for as many variables as possible. Spikes in the data for only one of the tested servers will only cause headaches. So can anyone recommend servers that: are not using anycast are owned by an entity that has a good uptime reputation (so they can't claim that the problem is server-side) will respond to ICMP requests Have an available service that runs on TCP/UDP (http or dns preferably) Wont consider an automated request every 10 minutes to be abuse Are accessible from anywhere in the world Are not local to the isp ( consider this an investigation of a hostile party ) Thanks in advance. Edit: added #6 and #7 above. More info: I am attempting to demonstrate a network problem for an entire node of our local ISP's network. They are actively blaming the issue on the equipment installed at the customer sites (our backup site is one of these), and refuse to escalate the problem. (even though 2 of these businesses have ISP provided modems, and all of us have completely different routers/services running) I am already quite familiar with the need to test an isp controlled IP, but they are actively dropping all packets targeted at gateway ip addresses and are only passing traffic addressed beyond the gateways. So to demonstrate the issue, I am sending packets to other systems in the same node, systems one hop away from the affected node, and systems completely outside the network. Unfortunately, all of the systems I have currently are either administered directly by myself, or by people who are biased enough to assist me. I need to have several systems included in the trace/log/graphs that are 100% not in the control of either myself or the isp so that the graphs have a stable/unbiased control group. These requirements are straight from legal, I'm just trying to make sure that everything that could be argued to invalidate the data is already covered. In Summary: I need to be able to show tcp/udp/icmp as 3 separate data points, and I need to be able to show the connections inside the local node, from local node to another nearby node, from those 2 nodes to the internet, and through the internet to both verifiable servers and a control group that I have no control over whatsoever. Again, Google/opendns/yahoo/msn/facebook/etc all use anycast, which throws the numbers off every time the anycast caches expire, so I need suggestions of an IP or server that is available for this type of testing. I was hoping someone knew of a system run by someone such as ISC or ICANN, or perhaps even a .gov server (fcc or nsa maybe?) setup for this type of testing. Thanks again.

    Read the article

  • Initial Cisco ASA 5510 Config

    - by Brendan ODonnell
    Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside interface from external devices. No matter what I do I can't get anything internal to route across the border to the outside and back. To try and eliminate ACL issues as a possibility I added permit any any rules to the incoming access lists on the inside and outside interfaces. I'd appreciate any help I can get. Here's the sh run. : Saved : ASA Version 8.4(3) ! hostname gateway domain-name xxx.local enable password xxx encrypted passwd xxx encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/1 nameif inside security-level 100 ip address 10.x.x.x 255.255.255.0 ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 10.x.x.x domain-name xxx.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-network subnet 10.x.x.x 255.255.255.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit ip any any access-list inside_access_in extended permit ip any any pager lines 24 logging enable logging buffered informational logging asdm informational mtu management 1500 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside icmp permit any outside no asdm history enable arp timeout 14400 ! object network inside-network nat (any,outside) dynamic interface access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 192.168.1.0 255.255.255.0 management http 10.x.x.x 255.255.255.0 inside http authentication-certificate management http authentication-certificate inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh 192.168.1.0 255.255.255.0 management ssh 10.x.x.x 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 dhcp-client client-id interface outside dhcpd address 192.168.1.2-192.168.1.254 management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn username xxx password xxx encrypted ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:fe19874e18fe7107948eb0ada6240bc2 : end no asdm history enable

    Read the article

  • How can I retrieve statistics from my ghost cast server?

    - by Foxtrot
    I have a GhostCast server running for deploying images. I would like to have each ghost cast session to write to a file ( can be multiple text files or append to one file already there ) statistics. I know this is possible based on the options GhostCast software provides for writing to a log file, but I would like this automated for every image being backed up and restored. I don't want to have my employees click write to a new file every time. Is this possible?

    Read the article

  • Understanding Asterisk Server features

    - by Arham Ali Qureshi
    I need to ask few question about Asterisk 1) Does ACL mean by Access Control list here ?If yes than how could i use it? >ip show user 6001 * Name : 6001 Secret : <Set> MD5Secret : <Not set> Context : DLPN_Admin Language : AMA flags : Unknown Transfer mode: open MaxCallBR : 384 kbps CallingPres : Presentation Allowed, Not Screened Call limit : 2147483647 Callgroup : 1 Pickupgroup : 1 Callerid : "test" <6001> ACL : No Sess-Timers : Accept Sess-Refresh : uas Sess-Expires : 1800 secs Sess-Min-SE : 90 secs RTP Engine : asterisk Codec Order : (ulaw:20,gsm:20) Auto-Framing: No 2) What is mean by "Require Call Token" in Asterisk Digium GIU on Create new User Panel 3) Is There any command from where i can get users VOICE MAIL password ? 4) What AMI or CLI command set call recording on or off for user ? and if i want that file to be stored on client computer not on server memory what could i do ?

    Read the article

  • Functional implications of differences in SSL and TLS

    - by Randell
    I know that TLS is essentially a newer version of SSL, and that it generally supports transitioning a connection from unsecured to secured (commonly through a STARTTLS command). What I don't understand is why TLS is important to an IT Professional, and why given the choice I would pick one over the other. Is TLS really just a newer version, and if so is it a compatible protocol? As an IT Professional: When do I use which? When do I not use which?

    Read the article

  • php processes owned by ppid 1 after X amount of time

    - by Kristopher Ives
    I have a CentOS server running WHM that uses FastCGI (mod_fcgid) running PHP 5.2.17 on Apache 2.0 with SuExec. When I start Apache it begins fine and serving requests. If I run ps on the terminal as root I see the php processes and they are owned by their httpd parent processes. After X amount of time - different from time to time, not much longer than a few hours typically - the server will begin spawning PHP jobs owned by the init process ID (1) Example of good listing: 12918 18254 /usr/bin/php 12918 18257 /usr/bin/php 12918 18293 /usr/bin/php 12918 18545 /usr/bin/php 12918 18546 /usr/bin/php 12918 19016 /usr/bin/php 12918 19948 /usr/bin/php Then later something like: 1 6800 /usr/bin/php 1 6801 /usr/bin/php 1 7036 /usr/bin/php 1 8788 /usr/bin/php 1 10488 /usr/bin/php 1 10571 /usr/bin/php 1 10572 /usr/bin/php The php processes running owned by (1) never get cleaned up. Why would these processes be running? We don't use setsid or anything beyond basic PHP in the code this server is running. Cheers & Thanks

    Read the article

  • Using multiple PaaS Vendors

    - by jpabluz
    I am developing a SaaS App, and I want to decide for a PaaS Vendor. Since one of my biggest concerns is uptime, is there an application or service, that allows me to use several PaaS Vendors (like Azure, Google App Engine, Amazon Web Services, etc.)? I want my application to be able to respond from one PaaS Vendor to another almost instantly without any downtime, to use the redundancy that this provides. This means that I need to be able to use the different services homogeneously.

    Read the article

  • Where is the central ZFS website now?

    - by Stefan Lasiewski
    Oracle dumped OpenSolaris in Fall 2010, and it is unclear if Oracle will continue to publicly release updates to ZFS, except maybe after they release their next major version of Solaris. FreeBSD now has ZFS v28 available for testing. But where did v28 come from? I notice that the main ZFS website does not show version 28 available. Has this website been abandoned? If so, where is the central website for the ZFS project, so that I can browse the repo, read the mailing lists, read the release notes, etc. (I realize that OpenSolaris has been dumped by Oracle, and that they are limiting their ZFS releases to the community).

    Read the article

  • Linux QoS: bulk data transmission during idle times

    - by syneticon-dj
    How would I do a QoS setup where a certain low-priority data stream would get up to X Mbps of bandwidth, but only if the current total bandwidth (of all streams/classes) on this interface does not exceed X? At the same time, other data streams / classes must not be limited to X. The use case is an ISP billing the traffic by calculating the bandwidth average over 5 minute intervals and billing the maximum. I would like to keep the maximum usage to a minimum (i.e. quench the bulk transfer during interface busy times) but get the data through during idle/low traffic times. Looking at the frequently used classful schedulers CBQ, HTB and HSFC I cannot see a straightforward way to accomplish this.

    Read the article

  • Active Directory password update not recognized on OS X 10.7.3?

    - by eaj
    We have a few Macs in our office which are bound to our Active Directory (Server 2k8R2) domain for login authentication and access to file shares. For the most part this has worked without trouble. I recently changed my AD password (from the Windows box that is my main desktop machine), and my iMac still wants my old password for logins—even after a reboot. It correctly prompts for the new password when I attempt to connect to Windows smb file shares. The last time I changed my password, the iMac was running Snow Leopard and picked up the password change as expected. I'm a little bit of an OS X n00b, so I apologize if this should be obvious. My searching has turned up numerous issues people have had with Lion and Active Directory, but not this particular problem. Possibly related, we do have mobile accounts enabled for AD in the Directory Utility options. I assume this causes credentials to be cached locally, but it's not clear to me how to get them to update.

    Read the article

  • Trouble connecting to vsftpd on ubuntu server

    - by littleK
    I have installed Ubuntu Server 10.10 and I am using it to host a domain that I have. I am trying to set up FTP for the server, but I am running into some problems. I have successfully installed vsFTPd and I have opened up ports 20, 21 on my firewall. In my vsFTPd configuration, I have enabled SSL. Every time I try to connect to my server via FTP, I receive a "Connection Refused" error. I have had a little more success with SSL disabled, however the connection process will time out after the LIST command (but it does accept my authentication). Here is my vsFTPd configuration, the SSL stuff is at the bottom: # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Disabled by default) anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # If enabled, vsftpd will display directory listings with the time # in your local time zone. The default is to display GMT. The # times returned by the MDTM FTP command are also affected by this # option. use_localtime=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd/empty # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/private/vsftpd.pem # SSL ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES Thanks!

    Read the article

  • Ghost/Acronis/Clonezilla Live Image Creation (Without Rebooting)

    - by user39621
    I know Ghost and Clonezilla aren't able to build images of a system while the system is running(Without Rebooting). Haven't Checked on Acronis though, but i don't simpatize with private solutions. Question: Is there a software solution which is able to build a "Live" image? Would appreciate anwsers, since I'm one step away from building a Clonezilla test enviroment and this will just help on my decision. Thank you.

    Read the article

  • Apache mod_jk Setting for Tomcat - workers.properties

    - by sissonb
    I am trying to direct files with .jsp extensions to tomcat. Otherwise I want apache to serve the file directly (no tomcat). Currently I have a test.jsp which is supposed to create an HTML page with the current date in the body. Instead when I go to that .jsp I see the JK Status Manager. The mod_jk.logs only show, init_jk::mod_jk.c (3365): mod_jk/1.2.35 initialized. I have tomcat and apache setup on my server. Apache runs on 80 and tomcat runs on 8080. localhost:8080 show the tomcat welcome page. I downloaded tomcat-connectors-1.2.35-windows-i386-httpd-2.2.x and copied the mod_jk.so to C:\apache\modules. Then I added LoadModule jk_module modules/mod_jk.so to my httpd.conf. I restart apache and the module loads just fine. Next I downloaded the mod_jk source to get the workers.properties file. I copy workers.properties to C:\apache\confg. Then I added this user, workers.tomcat_home="C:/Program Files/Apache Software Foundation/Tomcat 7.0" workers.java_home="C:/Program Files/Java/jdk1.7.0_03" worker.list=ajp13 worker.ajp13.port=8080 worker.ajp13.host=localhost worker.ajp13.type=ajp13 worker.ajp13.socket_timeout=10 When I try to use the ajp13 user in my httpd.conf I get the following error in my mod_jk.log, [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_connection_tcp_get_message::jk_ajp_common.c (1258): (ajp13) can't receive the response header message from tomcat, network problems or tomcat (127.0.0.1:8080) is down (errno=60) [Wed Mar 28 13:08:51 2012] [2196:4100] [error] ajp_get_reply::jk_ajp_common.c (2117): (ajp13) Tomcat is down or refused connection. No response has been sent to the client (yet) [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_service::jk_ajp_common.c (2614): (ajp13) sending request to tomcat failed (recoverable), (attempt=1) Next I update my httpd.conf with, JkWorkersFile C:/apache/conf/workers.properties JkLogFile C:/apache/logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " Also I added JkMount /*.jsp jk-status to my virtual host like this, <VirtualHost 192.168.5.250:80> JkMount /*.jsp jk-status #JkMount /*.jsp ajp13 ServerName bgsisson.com ServerAlias www.bgsisson.com DocumentRoot C:/www/resume </VirtualHost> I think i need to include a uriworkermap.properties file, but this is where I am getting stuck. I have put up a test .jsp at bgsisson.com/test.jsp It shows the JK Status Manager when I use JkMount /*.jsp jk-status and 502 Bad Gateway when I use JkMount /*.jsp ajp13 test.jsp <%-- use the 'taglib' directive to make the JSTL 1.0 core tags available; use the uri "http://java.sun.com/jsp/jstl/core" for JSTL 1.1 --%> <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %> <%-- use the 'jsp:useBean' standard action to create the Date object; the object is set as an attribute in page scope --%> <jsp:useBean id="date" class="java.util.Date" /> <html> <head><title>First JSP</title></head> <body> <h2>Here is today's date</h2> <c:out value="${date}" /> </body> </html>

    Read the article

  • How do I create an ISO image from a directory structure on CentOS?

    - by tom smith
    I'm trying to figure out the exact mkisofs cmd to create the ISO with the following directory and file structure. I've tried different commands, but when I mount the ISO that is created the directory tree has not been reproduced. The initial directory tree is: master.iso:: mount -o loop /apps/vmware/master.iso /mnt/vmtest ls /mnt/vmtest isolinux ks.cfg upgra32 upgra64 upgrade.sh ls /mnt/vmtest/isolinux boot.cat initrd.img isolinux.bin isolinux.cfg vmlinuz I've used different variations of the following mkisofs command without success: mkisofs -o '/foo/test.iso' -b 'isolinux.bin' -c 'boot.cat' -no-emul-boot -boot-load-size 4 -boot-info-table 'isolinux' How do I make an ISO that captures a directory's exact structure?

    Read the article

  • Anyone know a good mind mapper that works with a scheduler?

    - by GLycan
    TL;DR: Mind mapping tasks to be processed into a schedule based on task metadata. I have all sorts of ideas about what to invest resources (mainly time) in, but when I actually have time to do something I useually end up browsing reddit for not knowing what do to, and the frequancy with which I forget deadlines scares me. I'd love to bring order and structure into my mind, and always know what to do next. So, I want a mind mapping app, where I'd give each branch (types and subtypes of things I want to do) a importance score (if there were two branches, and one had 60 while the other 40, they would respectivily get 60% and 40% of the parent's importance, with the root being 100) and a how soon that branch should be revised/updated (an hobby I want to try out might be checked, say, once a week, while a school subject should be checked once a day) and give each leaf (something I want/need to do) how much time it takes, deadline (if any), and optionally an absolute importance, reoccurrence (guitar practice might repeat once a week), and prerequisites (reading something requires that book (although that could be brought somewhere), coding requires a box, jogging requires being outside) and maybe some other flags, like if it's enjoyable or not. It should either be packaged or working with a schedular app, to which I'd say, look, my day works this way (completely busy from 8 to 9:15, then 15 minutes of being inside with nothing, ..., two hours with box and possibility to go outside, etc), saying that such-and-such pattern is school and happens ever weekday except such-and-such days. The output should be of the form of a schedule, fit for printing or, when I finally get an android, mobile viewing, that schedules tasks with regards to availability of resources and importance (importance being derived from the leaf-task's parent branches), and the set of flags (all work and no play makes me a dull boy). One of these tasks should be reviewing anything that should be updated on that day, including future day layouts (e.g, if the time slots of future days have changed. This should be done every day.) Does anyone know some collection of preferably open-source (or free, or pirateable) tools, or better yet a single one, that accomplishes this task? I know python pretty well, and should be able to write any necessary glue.

    Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >