Monthly Archives

Articles indexed in September 2012

Page 367/470 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

  • itextsharp PdfCopy and landscape pages

    - by Andreas Rehm
    I'm using itextsharp to join mutiple pdf documents and add a footer. My code works fine - except for landscape pages - it isn't detecting the page rotation - the footer is not centerd for landscape: public static int AddPagesFromStream(Document document, PdfCopy pdfCopy, Stream m, bool addFooter, int detailPages, string footer, int footerPageNumOffset, int numPages, string pageLangString, string printLangString) { CreateFont(); try { m.Seek(0, SeekOrigin.Begin); var reader = new PdfReader(m); // get page count var pdfPages = reader.NumberOfPages; var i = 0; // add pages while (i < pdfPages) { i++; // import page with pdfcopy var page = pdfCopy.GetImportedPage(reader, i); // get page center float posX; float posY; var rotation = page.BoundingBox.Rotation; if (rotation == 0 || rotation == 180) { posX = page.Width / 2; posY = 0; } else { posX = page.Height / 2; posY = 20f; } var ps = pdfCopy.CreatePageStamp(page); var cb = ps.GetOverContent(); // add footer cb.SetColorFill(BaseColor.WHITE); var gs1 = new PdfGState {FillOpacity = 0.8f}; cb.SetGState(gs1); cb.Rectangle(0, 0, document.PageSize.Width, 46f + posY); cb.Fill(); // Text cb.SetColorFill(BaseColor.BLACK); cb.SetFontAndSize(baseFont, 7); cb.BeginText(); // create text var pages = string.Format(pageLangString, i + footerPageNumOffset, numPages); cb.ShowTextAligned(PdfContentByte.ALIGN_CENTER, printLangString, posX, 40f + posY, 0f); cb.ShowTextAligned(PdfContentByte.ALIGN_CENTER, footer, posX, 28f + posY, 0f); cb.ShowTextAligned(PdfContentByte.ALIGN_CENTER, pages, posX, 20f + posY, 0f); cb.EndText(); ps.AlterContents(); // add page to new pdf pdfCopy.AddPage(page); } // close PdfReader reader.Close(); // return number of pages return i; } catch (Exception e) { Console.WriteLine(e); return 0; } } How do I detect the page rotation (e.g. landscape) format in this case? The given example works for PdfReader but not for PdfCopy. Edit: Why do I need PdfCopy? I tried copying a word pdf export. Some word hyperlinks will not work when you try to copy pages with PdfReader. Only PdfCopy transfers all needed page informations. Edit: (SOLVED) You need to use reader.GetPageRotation(i);

    Read the article

  • How to hide action bar before activity is created, and then show it again?

    - by Ilya Izhovkin
    I need to implements splash screen in my honeycomb app. I use this code in activity's onCreate to show splash: setContentView(R.layout.splash); getActionBar().hide(); and this code to show main UI after some time: setContentView(R.layout.main); getActionBar().show(); But before onCreate is called and splash appears, there is small amount of time when action bar shown. How can I made it not to show? I tried to apply theme to activity without action bar: <item name="android:windowActionBar">false</item> but in that case getActionBar() always returns null and I found no way to show it again.

    Read the article

  • Select one column from a row in hibernate

    - by ComfortablyNumb
    I am trying to do a simple query to get a unique result back in hibernate here is my code. public String getName(Integer id) { Session session = getSessionFactory().openSession(); String name = (String)session.createSQLQuery("SELECT name FROM users WHERE user_id = :userId").setParameter("userId", id).uniqueResult(); return name; } The name that is being returned is stored as HTML text that includes html syntacx language. I think this is what is causing the problem but it doesnt make sense I just want to return it as a string. It is only happening on this one field name, I can get every other field in the row but this one it gives me the error. I am getting an exception. The exception I am getting is No Dialect mapping for JDBC type: -1; nested exception is org.hibernate.HibernateException How do you query for a specific column on a row in hibernate?

    Read the article

  • drupal display submenu when parent has been selected

    - by Steven Cheng
    I've have a menu structure that has a depth of 3 levels on a drupal 6 CMS. When I click on a level 1 that has children, the level 2 menu items display fine. If the level 2 has children, it is not showing the level 3. If I check the expanded box the level 3 is displayed however, it displays all the time irrespective of the level 2 that has been selected. It seems to display whenever it's parent level 1 is selected. For further information, the menu items are a mixture of custom links & content links. i.e. Links I've enetered manually when creating the menu and others generated by when creating a node or view display. All I want is to show the children if there are any for the selected parent. Am I missing something fundamental here? Thanks Steve

    Read the article

  • WCF Security in a Windows Service

    - by Alphonso
    I have a WCF service which can run as Console App and a Windows Service. I have recently copied the console app up to a W2K3 server with the following security settings: <wsHttpBinding> <binding name="ServiceBinding_Security" transactionFlow="true" > <security mode="TransportWithMessageCredential" > <message clientCredentialType="UserName" /> </security> </binding> </wsHttpBinding> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType="Common.CustomUserNameValidator, Common" /> </serviceCredentials> Security works fine with no problems. I have exactly the same code, but running in a windows service and I get the following error when I try to call any of the methods from a client: System.ServiceModel.Security.MessageSecurityException was unhandled Message="An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail." Source="mscorlib" StackTrace: Server stack trace: at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout) ...... (lots of stacktrace info - not very useful) InnerException: System.ServiceModel.FaultException Message="An error occurred when verifying security for the message." The exception tells me nothing. I'm assuming that it has something to do with acces to system resources from the Windows Service. I've tried running it under the same account as the console app, but no luck. Does anyone have any ideas?

    Read the article

  • one-to-many with criteria question

    - by brnzn
    enter code hereI want to apply restrictions on the list of items, so only items from a given dates will be retrieved. Here are my mappings: <class name="MyClass" table="MyTable" mutable="false" > <cache usage="read-only"/> <id name="myId" column="myId" type="integer"/> <property name="myProp" type="string" column="prop"/> <list name="items" inverse="true" cascade="none"> <key column="myId"/> <list-index column="itemVersion"/> <one-to-many class="Item"/> </list> </class> <class name="Item" table="Items" mutable="false" > <cache usage="read-only"/> <id name="myId" column="myId" type="integer"/> <property name="itemVersion" type="string" column="version"/> <property name="startDate" type="date" column="startDate"/> </class> I tried this code: Criteria crit = session.createCriteria(MyClass.class); crit.add( Restrictions.eq("myId", new Integer(1))); crit = crit.createCriteria("items").add( Restrictions.le("startDate", new Date()) ); which result the following quires: select ... from MyTable this_ inner join Items items1_ on this_.myId=items1_.myId where this_.myId=? and items1_.startDate<=? followed by select ... from Items items0_ where items0_.myId=? But what I need is something like: select ... from MyTable this_ where this_.myId=? followed by select ... from Items items0_ where items0_.myId=? and items0_.startDate<=? Any idea how I can apply a criteria on the list of items?

    Read the article

  • Sorting the columns of an HTML table using JQuery

    - by nikolaosk
    In this post I will show you how easy is to sort the columns of an HTML table. I will use an external library,called Tablesorter which makes life so much easier for developers. ?here are other posts in my blog regarding JQuery.You can find them all here. You can find another post regarding HTML tables and JQuery here. We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. You can also use VS 2010 editions.   1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application. 2) Add a web form, default.aspx page to the application. 3) Add a table from the HTML controls tab control (from the Toolbox) on the default.aspx page 4) Now we need to download the JQuery library. Please visit the http://jquery.com/ and download the minified version.Then we need to download the Tablesorter JQuery plugin. Please donwload it, here. 5) We need to reference the JQuery library and the external JQuery Plugin. In the head section ? add the following lines.   <script src="jquery-1_8_2_min.js" type="text/javascript"></script>  <script src="jquery.tablesorter.js" type="text/javascript"></script>6) We need to type the HTML markup, the HTML table and its columns <body>    <form id="form1" runat="server">    <div>        <h1>Liverpool Legends</h1>        <table style="width: 50%;" border="1" cellpadding="10" cellspacing ="10" class="liverpool">            <thead>                <tr><th>Defenders</th><th>MidFielders</th><th>Strikers</th></tr>            </thead>            <tbody>            <tr>                <td>Alan Hansen</td>                <td>Graeme Souness</td>                <td>Ian Rush</td>            </tr>            <tr>                <td>Alan Kennedy</td>                <td>Steven Gerrard</td>                <td>Michael Owen</td>            </tr>            <tr>                <td>Jamie Garragher</td>                <td>Kenny Dalglish</td>                <td>Robbie Fowler</td>            </tr>            <tr>                <td>Rob Jones</td>                <td>Xabi Alonso</td>                <td>Dirk Kuyt</td>            </tr>                </tbody>        </table>            </div>    </form></body> 7) Inside the head section we also write the simple JQuery code.   <script type="text/javascript"> $(document).ready(function() { $('.liverpool').tablesorter(); }); </script> 8) Run your application.This is how the HTML table looks before the table is sorted on the basis of the selected column.   9) Now I will click on the Midfielders header.Have a look at the picture below  Tablesorter is an excellent JQuery plugin that makes sorting HTML tables a piece of cake. Hope it helps!!!

    Read the article

  • Creating Multiple Queries for Running Objects

    - by edurdias
    Running Objects combines the power of LINQ with Metadata definition to let you leverage multiples perspectives of your queries of objects. By default, RO brings all the objects in natural order of insertion and including all the visible properties of your class. In this post, we will understand how the QueryAttribute class is structured and how to make use of it. The QueryAttribute class This class is the responsible to specify all the possible perspectives of a list of objects. In other words, is...(read more)

    Read the article

  • Require file for mount and also update the file after mount?

    - by Andy Shinn
    I am trying to make sure a directory exists for a mount and then also update the permissions of that directory after the mount happens. I am receiving the following error: err: Failed to apply catalog: Cannot alias File[pre_eos_mount] to ["/var/tmp/eos"] at /etc/puppet/modules/mymodule/manifests/eos.pp:29; resource ["File", "/var/tmp/eos"] already declared at /etc/puppet/modules/mymodule/manifests/eos.pp:47 I would like to do something like this: file { $eos_mount : ensure = 'directory', mode = '1777', owner = 'root', group = 'root', } mount { $eos_mount : ensure = 'mounted', device = $lv_device, fstype = $fstype, options = 'defaults,noatime,nodiratime', require = File[$eos_mount], notify = File['post_eos'], } file { 'post_eos' : path = $eos_mount, ensure = 'directory', mode = '1777', owner = 'root', group = 'root', } What is a way to ensure permissions of a folder after it has been mounted?

    Read the article

  • Wireless connection silently dies randomly

    - by Force Flow
    I have two WAP4410N wireless access points powered using Power-Over-Ethernet. They are both connected to the same LAN and broadcasting the same SSID with a WPA2 password. One is using channel 1, while the other is using channel 11. There is coverage overlap where the signal from both access points hover around -75db to -85db while standing in the same physical location. DHCP is disabled, and is being provided by another network device. Every day or so, devices can connect and authenticate to the access points, but are not granted an IP address (and subsequently are unable access to the LAN or Internet). For devices that had already retrieved an IP address prior to the issue exhibiting itself, the devices simply stop communicating with LAN and Internet. However, I can still access each access point's web admin interface from the LAN. If I reboot both devices, the problem vanishes and devices are once again able to get an IP address and connect to the LAN and Internet. Are these symptoms of signal interference between the two WAPs or is this a completely different issue?

    Read the article

  • Dir all files to output.log, including message "File Not Found"

    - by user316687
    I'm trying to dir a bunch of files with dos command: dir My dir.bat file: dir E:\documentos\57\Asiento\01\"Asiento 3 Modificacion de Estatuto.doc" dir E:\documentos\134\Asiento\01\"File Does Not Exist.doc" dir E:\documentos\55\Asiento\01\"Asiento 5 Padron de Afiliados Segunda Entrega.doc" The second one doesn't exist. Then, when running my bat: C:\myuser>E:\dir.bat > output.log I open output.log and don't find any message about the file that was not found. Output.log : E:\documentos>dir E:\documentos\57\Asiento\01\"Asiento 3 Modificacion de Estatuto.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\57\Asiento\01 20/12/2005 06:41 p.m. 40,960 Asiento 3 Modificacion de Estatuto.doc 1 File(s) 40,960 bytes 0 Dir(s) 17,053,155,328 bytes free E:\documentos>dir E:\documentos\134\Asiento\01\"File Does Not Exist.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\134\Asiento\01 E:\documentos>dir E:\documentos\55\Asiento\01\"Asiento 5 Padron de Afiliados Segunda Entrega.doc" Volume in drive E is New Volume Volume Serial Number is 0027-F7F6 Directory of E:\documentos\55\Asiento\01 08/08/2007 08:33 a.m. 40,960 Asiento 5 Padron de Afiliados Segunda Entrega.doc 1 File(s) 40,960 bytes 0 Dir(s) 17,053,151,232 bytes free Is there any way that output.log shows "File Not Found" message?

    Read the article

  • Tunneling a public IP to a remote machine

    - by Jim Paris
    I have a Linux server A with a block of 5 public IP addresses, 8.8.8.122/29. Currently, 8.8.8.122 is assigned to eth0, and 8.8.8.123 is assigned to eth0:1. I have another Linux machine B in a remote location, behind NAT. I would like to set up an tunnel between the two so that B can use the IP address 8.8.8.123 as its primary IP address. OpenVPN is probably the answer, but I can't quite figure out how to set things up (topology subnet or topology p2p might be appropriate. Or should I be using Ethernet bridging?). Security and encryption is not a big concern at this point, so GRE would be fine too -- machine B will be coming from a known IP address and can be authenticated based on that. How can I do this? Can anyone suggest an OpenVPN config, or some other approach, that could work in this situation? Ideally, it would also be able to handle multiple clients (e.g. share all four of spare IPs with other machines), without letting those clients use IPs to which they are not entitled.

    Read the article

  • Should the MAC Tables on a switch Stack be the same between sessions?

    - by Kyle Brandt
    According to Cisco's documentation: "The MAC address tables on all stack members are synchronized. At any given time, each stack member has the same copy of the address tables for each VLAN." However, when logged into the switch I see the following: ny-swstack01#show mac ad | inc Total Total Mac Addresses for this criterion: 222 ny-swstack01#ses 2 ny-swstack01-2#show mac ad | inc Total Total Mac Addresses for this criterion: 229 ny-swstack01-2#exit ny-swstack01#ses 3 ny-swstack01-3#show mac ad | inc Total Total Mac Addresses for this criterion: 229 ny-swstack01-3#exit ny-swstack01#ses 4 ny-swstack01-4#show mac ad | inc Total Total Mac Addresses for this criterion: 235 ny-swstack01-4#exit ny-swstack01#show mac ad | inc Total Total Mac Addresses for this criterion: 222 Going back and forth this isn't just because it is changing over time either, within certain sessions there are entries that I don't seen from the master session. We are currently waiting to hear back on CIsco from this, but has anyone run into this before? I stumbled upon this when looking into Unicast flooding, one of the hosts that is a destination MAC of flooding has a MAC entry that appears in session 3, but nowhere else. Also, I checked an all sessions show the same aging time.

    Read the article

  • Can I see if and when a file was deleted on Windows Server 2003?

    - by user316687
    On Windows Server 2003, is there a way to see if and when a file was deleted? It's a web server with IIS, our web application let our users to load Word documents into server. However, we found that one Word file is missing, and would like to know is it was deleted or never existed (web app could'nt load it). EDIT: I tried to follow this: Enable auditing the folder you want to keep track of. Just right click on the folder, go to “sharing and security”, then “security” tab, at the bottom click on “advanced”. Select the auditing tab, click add, select the group or users to track, then pick what actions you want to track. To track file deletion you would enable: Create files/Write data Success/Fail Create folders / append data Success/Fail Delete Subfolders/Files Success/Fail Delete Suceess/Fail This one will apply from now on, past actions wouldn't be able to track?

    Read the article

  • How do I correctly SSH port forward using LiveReload on Redhat?

    - by program247365
    Referencing this page: http://feedback.livereload.com/knowledgebase/articles/86280-if-you-edit-files-directly-on-your-server It says you can remotely port forward the LiveReload specific port of 35729, using this command: ssh -L 35729:127.0.0.1:35729 mylogin@myremoteserverIP When I run the -v option, I get: debug1: Local connections to LOCALHOST:35729 forwarded to remote address 127.0.0.1:35729 debug1: Local forwarding listening on ::1 port 35729. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 35729. debug1: channel 1: new [port listener] debug1: channel 2: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: client_input_channel_req: channel 2 rtype [email protected] reply 1 debug1: Connection to port 35729 forwarding to 127.0.0.1 port 35729 requested. debug1: channel 3: new [direct-tcpip] channel 3: open failed: connect failed: Connection refused debug1: channel 3: free: direct-tcpip: listening port 35729 for 127.0.0.1 port 35729, connect from 127.0.0.1 port 63673, nchannels 4 I thought editing my /etc/services with this line, would work, but it doesn't: livereload 35729/tcp # livereload usage with guard-livereload Every time I attempt to connect with the browser extension, I believe It's getting blocked by my server. What am I missing here? Do I need to edit /etc/services for this to work?

    Read the article

  • Why is file sharing over internet still working, despite all firewall exceptions for filesharing being disabled?

    - by Triynko
    Every exception in my windows server firewall that starts with "File and Printer Sharing" is disabled (ordered by name, so that includes domain, public (active), and private profiles). The Network and Sharing Center's options for everything except password protected sharing are off. Why would I still be able to access a network share on that server via an address like "\\my.server.com\" over the internet? The firewall is on for all profiles and blocking incoming connections by default. A "netstat -an" command on the server reveals the share connection is occurring over port 445 (SMB). I restarted the client to ensure it was actually re-establishing a new connection successfully. Is the "Password protected sharing: On" option in Network and Sharing Center bypassing the firewall restrictions, or adding some other exception somewhere that I'm missing? EDIT: "Custom" rules are not the problem. It's the "built-in" rules for Terminal Services that was the problem. Can you believe port 445 (File Sharing Port) has to be wide open to the internet to use Terminal Services Licensing?)

    Read the article

  • Start Daemonised GNU Screen from script a allow calling script to end

    - by tez
    I have a script on an embedded device that calls screen to start if a user logs in via a ssh session... #!/bin/sh SCREENRUNNING=`pgrep SCREEN` if [ -z "$SCREENRUNNING" ]; then echo "Screen not running so let's start the Master session sleep 2 screen -dmS Master sleep 2 screen -x root/Master else echo "Screen is already running let's connect to existing session" sleep 2 screen -x root/Master fi However this keeps the calling script active till the screen session exits,even if it's detached. What I want to do is have the calling script finish and exit while the screen session stays active. I've tried daemonising the screen -x lines and adding an & to the end of the screen -x lines neither of which work properly. Ideas?

    Read the article

  • How to handle server failure in an n-tier architecture?

    - by andy
    Imagine I have an n-tier architecture in an auto-scaled cloud environment with say: a load balancer in a failover pair reverse proxy tier web app tier db tier Each tier needs to connect to the instances in the tier below. What are the standard ways of connecting tiers to make them resilient to failure of nodes in each tier? i.e. how does each tier get the IP addresses of each node in the tier below? For example if all reverse proxies should route traffic to all web app nodes, how could they be set up so that they don't send traffic to dead web app nodes, and so that when new web app nodes are brought online they can send traffic to it? I could run an agent that would update all the configs to all the nodes, but it seems inefficient. I could put an LB pair between each tier, so the tier above only needs to connect to the load balancers, but how do I handle the problem of the LBs dying? This just seems to shunt the problem of tier A needing to know the IPs of all nodes in tier B, to all nodes in tier A needing to know the IPs of all LBs between tiers A and B. For some applications, they can implement retry logic if they contact a node in the tier below that doesn't respond, but is there any way that some middleware could direct traffic to only live nodes in the following tier? If I was hosting on AWS I could use an ELB between tiers, but I want to know how I could achieve the same functionality myself. I've read (briefly) about heartbeat and keepalived - are these relevant here? What are the virtual IPs they talk about and how are they managed? Are there still single points of failure using them?

    Read the article

  • Hosting a site on amazon ec2

    - by Khalid Mushtaq
    I have recently bought an amazon ec2 instance. Now I want to host a website. I have googled and found some useful info but there is some confusion in my mind. Suppose domain name is "http://www.example.com" That's what I have done so far. I have configured my domain locally on amazon ec2 instance and it's working fine when I open that url in amazon ec2 instance's browser. I have used http://www.example.com in /etc/hosts file point it to 127.0.0.1 to open locally on instance. I have got one elastic ip address and associated it with the instance. I have changed http://www.example.com A's record with the elastic IP that I have got in above step. Now what should I do? When some user will open my website anywhere in the world, will it get pointed to my instanace's ip address? Have I done proper configurations for website on instance?

    Read the article

  • Glassfish JSF/EAR Apache 2.2 proxy_ajp_mod Referred Content Missing (images/links/etc)

    - by BillR
    Full disclosure: Since this seems to be more of a configuration issue, I deleted this from Stack (where it wasn't getting any response) and reposted here. The problem is how to change the requestContextPath served up by Glassfish behind mod_proxy_ajp. The site/app runs fine if connecting directly to Glassfish port 8080 which is ultimately not what I want to do. So I need help with configuration for my servers and jsf deployment. I can see the issue but don't know how to resolve it. It has to do with the requestContextPath. Simply put, Apache directs to http://mysite.com/welcome.xhtml which is correct and what I want, but the page is minus the images and styles. The issue is Glassfish itself is still pointing to http://mysite.com/myapp/*. So all links it serves in the app/site still refer via the requestContextPath. That is the /myapp/* part of http://mysite.com/myapp/welcome.xhtml. When I look in the page source, images which are referred to with relative links still point to the requestContextPath (that is, /myapp/). This is fixable but a real pain. However with page links I can't set the relative path. If I hover over the contact page link I see http://mysite.com/myapp/contact.xhtml, and if I click it, I get 404. You can see the /myapp/ context path in the page source as well. If I type in the URL http://mysite.com/contact.xhtml I get the page minus its referred links (requestContextPath). On Apache ProxyPass / ajp://littlewalterserver:8009/myapp-web/ ProxyPassReverse / ajp://littlewalterserver:8009/myapp_Project-web On Glassfish asadmin create-network-listener --listenerport 8009 --protocol http-listener-1 --jkenabled true jk-connector I have tried going in to Glassfish and setting the web app as the default web app. I have changed the / in glassfish-web.xml (and checked to make sure it was the same in the EAR file). How can I get Glassfish to not include the /myapp/ context in the URLs? This has to be easy if you know how, but I don't know how, can someone help out here? Thanks.

    Read the article

  • BackupExec 2012 File System Archiving - Access is denied to Remote Agent

    - by AllisZero
    Gentlemen, I've been struggling with a Trial version of Symantec Backup Exec 2012 for about a week now. It was installed as an upgrade to our 12.5 license, and the setup completed with no issues. The reason I upgraded is solely for the File System Archiving option as I'm working to reduce the amount of live data in my servers. Backups work A-Ok and I have followed the instructions in the Admin Manual to make sure I had filled all requirements. The account BE is running under is a member of the Local administrators group as required and has been added to the test share that I'm using to evaluate the archiving function. Testing the credentials in the job setup window always works fine, and I am able to add both regular and Admin$ shares to my Archive selection. However, every time I run the Archive job, I get the following message: https://dl.dropbox.com/u/59540229/BEXec.png I've already tried to troubleshoot DNS resolution issues as suggested in the Symantec KB to no avail. The only thing I can think of, at this point, is that a trial license doesn't allow me to use the Archiving function, although that would seem silly on their part. Appreciate any assistance or information. Thanks.

    Read the article

  • Use puppet to make changes to ip route and sysctl

    - by Quintin Par
    I have two changes to ip route & sysctl that disable tcp slow start. Here’s how I do it ip route show Make a note of the line starting with default. Pick up the IP from the default line and run sudo ip route change default via $ip_address dev eth0 initcwnd 12 sudo sysctl -w net.ipv4.tcp_slow_start_after_idle=0 How can I create a puppet script out of this? One that can be deployed to many machines of the same type – CentOS 6 Edit: Added bounty to get a working example for sudo ip route change default via $ip_address dev eth0 initcwnd 12

    Read the article

  • Road Warrior VPN Setup

    - by wobblycogs
    I apologise up front for the rather open ended nature of this question but I've got well out of my depth and could really do with some pointers. I need to set up a road warrior VPN solution which will allow our customers to securely access a number of services we provide for them. Customer machines will be running a variety of Windows versions from XP onwards with a variety of patch levels. Typically they will connect from the clients main offices but not always. It is safe to assume that all clients will be behind NATs but we may occasionally see a connection that isn't NAT'ed. Typical connection situation is therefore: Customer Laptop -- Router (NAT) -- Internet -- VPN Server + Firewall -- Server (Win 2008 R2, Non-routable IP) There will initially be a dozen or so people that could connect but that will grow quickly to around 100. It's unlikely that we'll see that many concurrent connections though, I imagine our total VPN throughput would be <50Mbps peak. What are my options for setting this up? I've been trying to set up a system like this using a MikroTik router for a few days but have struggled to get it working correctly, particularly with NAT'ed clients. I've had a quick look at OpenVPN and liked what I saw but I think it's unlikely our customers IT departments would allow the client to be installed. Finally I've looked at the Cisco ASA range but I'm on a fairly tight budget so this is less preferable but it looks like it would work pretty much out of the box. My fall back position is to connect the server directly and use the provided VPN + Firewall facilities but that is far from ideal as the number of servers is likely to grow over time.

    Read the article

  • VirtualBox Shared Folder encoding issue

    - by Somebody
    I'm using Ubuntu in Virtualbox and have a shared folder mounted to Virtualbox which i'm accessing inside Ubuntu. The problem is, that when i'm editing and saving some files from shared folder in Windows it's getting some strange symbols at the end of edited file. There must be some encoding issues. Doesn't Virtualbox automatically converts files to Unix standards? To fix that, i have to re-mount shared folder inside Ubuntu each time i'm editing some file. Any solution to avoid re-mounting each time I edit? I'm mounting like that: mount -t vboxsf SVN /opt/htdocs/ Thanks.

    Read the article

  • Symantec Backup exec 2012 for SBS - moving data to offsite drives

    - by Will Lennard
    Can anyone advise how best to run the following strategy, or even if it is possible/sensible strategy? I am looking to backup an SBS server using BE2012 where the data is backed up on a weekly full backup, with subsequent daily incrementals till the end of the week, a fresh full backup will then be taken the next weekend, and the cycle repeats for 4 weeks, thus 4 full backups with incrementals. This months worth of backups will then be moved off to an offsite store via USB drive for safe keeping. Is this viable, sensible, or am i just a bit crazy? All ideas are welcome.

    Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >