Monthly Archives

Articles indexed in June 2012

Page 65/464 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Intel z77 vs h77 for intensive compiling, gaming [closed]

    - by Bilal Akhtar
    I'm in the market for a desktop motherboard (preferably ATX) that functions well with Intel i7-3770 Ivy Bridge processor at 3.4 GHz with LGA1155 socket. That processor is very fast, and it should handle all my tasks. My question is about the type of motherboard chipset I should choose to accompany it. I plan to use my rig for compiling and developing Debian package and other OS components, web development, occasional Android apps, chroots, VMs, FlightGear, other gaming but nothing serious, and heavy multitasking, all on Ubuntu. I do NOT plan to overclock, and I never will, so that's not a cause of concern for me. That said, I'm down to three chipset choices: Intel H77 Intel Z68 Intel Z77 I'm planning to go for H77 since I don't need any of the new features in Z77. I don't plan to use a second GPU and I will never overclock my CPU/GPU. My question is, will H77 based MoBos handle all my tasks well? Intel advertises that chipset as "everyday computing" but other sites say it's base functionality is the same as Z77. Intel rather advertises Z77 for "serious multitaskers, hardcore gamers and overclocking enthusiasts". But the problem with all Z77 motherboards I've seen is, they're way too expensive and their main feature seems to be overclocking, which won't be useful to me. Will I lose any raw CPU/GPU performance or HDD R/w with the H77 when comparing it to a Z77? Will heat, etc be an issue too? From what I've seen, Z77 motherboards have larger heat sinks when compared to H77 ones. Will that be an issue too, if I go with an H77 motherboard with no heat sinks for the chipset? The CPU will have a fan in both cases, of course. tl;dr When it comes to CPU/GPU performance and HDD r/w, is the Intel H77 chipset slower than the Z77? I don't care about overclocking or multiple GPUs, and for the processor, I'm set on Ivy Bridge i7-3770.

    Read the article

  • GeForce 9600GT support for dual monitor setup

    - by Theo
    I have a NVIDIA GeForce 9600 GT (point of view, link) on an Asus M2V-MX motherboard. The card has one DVI, HDMI and S-Video output. The graphics card does not seem to support dual monitors: the driver control panel for the graphics card does not detect a second monitor that is attached via S-Video (which leads me to believe that it doesn't support dual monitors with DVI and the other connections). Would it be possible to use a VGA/DVI splitter to attach two monitors to the single DVI output on the graphics card? Would this allow for a dual monitor setup, or only mirroring? How do I know if the graphic card supports this? With this particular motherboard, would it be possible to use the onboard video for another monitor?

    Read the article

  • Display stretches 4:3 ratios; Adds scrolling to other ratios

    - by Matt
    I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

    Read the article

  • accessing a web server from the LAN and WAN

    - by jessh
    My router does not support loopback. In order to view a webpage on my server, I either have to type in the local ip (192.168.1.201), or be on another network. What are my options for making this easier? Here are some possible things: Route all web traffic through an external proxy (seems to be overkill) Run my own DNS server (where to start?!) Buy a new router that supports loopback. Surely there is another way that I can use my laptop on the LAN and the WAN by typing in my domain more easily than these solutions.

    Read the article

  • Throttle CPU Usage consumed by Process

    - by Brett Powell
    We run a game-server company where we basically have large amounts of customers sharing a single machine, and are just on their own instance of a Java Process (Minecraft) managed by our Web Control Panels. In the last few game updates released, we have noticed that many of the third-party plugins our customer's use have become poorly written and we are frequently seeing huge CPU increases from certain servers until we manually kill the process. Our Game Panel automatically restarts processes, so killing them is not really an issue. Our problem is that once once of these servers starts consuming 50%+ CPU Usage, it takes atleast 5 minutes to RDP into the machine, locate who it belongs to, shut it down and notify them. Are there any current solutions for Server 2008 which allow for the throttling of CPU usage or worst case, just auto kill a process stuck using that much? As Minecraft is essentially a single-threaded application, we have investigated using Affinity, although with the variations in our Packages and fluctuations in usage, this doesn't work well for us. Some option to throttle the maximum usage a process can use would be perfect, or at least the option to kill a process using that much. Thanks!

    Read the article

  • How does QuickBooks handle IIF imports?

    - by dwwilson66
    I've received a 'template' for an IIF file for Quickbooks transactions, and there's like seventy-bazillion fields in there, lots of which I never even user. It's a tab delimited file, with the following lines--field headers for transactions and respective splits for those transactions, followed by an end-of-transaction marker. !TRNS FIELD1 FIELD2 FIELD3 ... FIELD48 !SPL FIELD1 FIELD2 FIELD3 ... FIELD48 !ENDTRNS TRNS FIELD1_DATA FIELD2_DATA FIELD3_DATA ... FIELD48_DATA SPL FIELD1_DATA FIELD2_DATA FIELD3_DATA ... FIELD48_DATA ENDTRNS ... What drives data to a particular field? Is it the field header with corresponding data, or is it the tabular position relative to the head of the line? E.G., Let's say all I have to import is the data in FIELD1, FIELD3 and FIELD5: Would I need by header: !TRNS FIELD1 FIELD3 FIELD5 !SPL FIELD1 FIELD3 FIELD5 !ENDTRNS TRNS FIELD1 FIELD3 FIELD5 SPL FIELD1 FIELD3 FIELD5 ENDTRNS or by tabular position: !TRNS FIELD1 FIELD2 FIELD3 FIELD4 FIELD5 !SPL FIELD1 FIELD2 FIELD3 FIELD4 FIELD5 !ENDTRNS TRNS FIELD1_DATA FIELD2_BLANK FIELD3_DATA FIELD4_BLANK FIELD5_DATA SPL FIELD1_DATA FIELD2_BLANK FIELD3_DATA FIELD4_BLANK FIELD5_DATA ENDTRNS Alternately, if it were a comma delimited input, would I need: DATA1,DATA3,DATA5 or DATA1,,DATA3,,DATA5 Anyone have any experience with what Quickbooks is doing?

    Read the article

  • Other user SSHed from my hardware

    - by Alex
    While logged into our HPC cluster I used w to check out who else was logged in. I happened to notice that it looks like there's another user logged in from my (personal) computer; 19:04:47 up 40 days, 6:39, 44 users, load average: 0.10, 0.14, 0.18 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT ME pts/4 zerg.neuron12. 18:55 0.00s 0.09s 0.04s w SOMEONE_ELSE pts/35 zerg.neuron12. Sat14 2:27m 0.08s 0.08s -bash Is this something I should be worried out - I tried to kill the other session but had a permission denied message. Is it possible we just both have the same hardware name? I'd have thought that if this were the case the server would give one of us a different name (e.g. zerg1) when we logged in to prevent confusion. This is not an area I have any experience with, so any advice would be greatly appreciated!

    Read the article

  • How to remove a partition on a USB drive?

    - by Nathan Long
    I got a free promotional USB stick that I want to format for my own purposes. When I inserted it, it automatically opened a browser and launched a web site. I have since disabled autoplay on this computer so that nothing launches when the stick is inserted. But it still shows up as two separate drives, and one of them is a "CD Drive" that I can't format. How can a USB stick contain a "CD Drive?" And more to the point, how can I remove this partition using Windows XP or Ubuntu? Update I previously asked for an XP solution, but finding none, I have tried Ubuntu, also without success. Gparted doesn't see the "CD" portion as a device at all, and from bash, any chmod changes I try tell me that the file system is read-only. Any ideas?

    Read the article

  • How to remove 'ApacheMonitor.exe' from notification area

    - by ekaj
    For some reason I had 2 instances of Apache running, and I have no idea how. I also had two instances of ApacheMonitor.exe showing in the "Notification Area Icons" place when you right click on your taskbar and go to properties. To fix the multiple instance issue, I deleted Apache completely and uninstalled the service (I did not use the .msi, I install from a .zip). Anyways, Everything from Apache is gone except the two things in the Notification Area Icon page. Does anyone know how to remove these two icons? I have completely uninstalled Apache, cleaned my registry with CCleaner, and rebooted. Does anyone have any other suggestions? Despite what the picture says, I do NOT have Apache installed, and it is not running.

    Read the article

  • Toshiba Portege M400 screen rotation not working under Windows 7 x64

    - by Christi
    I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

    Read the article

  • APPDATA and LOCALAPPDATA environment variables are not set on a profile in Windows 7 Pro 32bit

    - by Timur Fanshteyn
    I am having problem with a user account on a Windows 7 machine (local install, admin user account) APPDATA and LOCALAPPDATA environment are not set. Another user on the same machine, (also a local account, but without admin rights) has the variables set. This started to happen recently, however, I can not figure out if there was something installed on the machine to cause this. This is creating issues with applications that are trying to expand the variables to store local files. Thank you for the help.

    Read the article

  • Wake up my company computer from a home computer

    - by Darcy
    I would like to learn if it is possible for me to send a packet (a magical one) from another computer to my computer. I am interested in waking up my computer at work from the one I am using at home. That is I would like to power it on at 7:00am by sending it a wake-on packet from the home computer. I have no idea how to carry out this seemingly trivial task, I hope someone could offer some basic ideas for me start. Thank you so much in advance.

    Read the article

  • Setup VPN network for PS3

    - by L Franco
    Getting informed on setting up a home network so i can use VPN on my PS3, i live in Mexico but want the programming available in the US. Getting a little confused as every sites gives you different options, both in hardware and software. specially on subjects like dd-wrt, dns or vpn options... i know there is no "best" setup, but are there any tried and true?? Options in hardware and software would be apreciated...

    Read the article

  • Outlook 2010 - Export of an Exchange OST to PST creates files with different sizes each time

    - by Jiri Pik
    This is a most weird issue. I have a couple of exchange OST mailboxes, and just for security, I am exporting them using File / Import / Export to a file / Export to PST file. If I run the export consecutively, it always creates files with different file sizes, WITH NO ERROR OR WARNING that something went wrong. The files should be of the same size as you run it right after the previous backup finished. I found out that if the filesize is substantially lower, then a reboot and back up can fix this up. What's your insight into this problem? What could cause that the files have different sizes and what could have caused that there is no warning? I suspected some Windows Search issue as sometimes the backup fails with a dialog error stating that Windows Search terminated the export.

    Read the article

  • Pixelated PDF in Apple Preview slideshow mode, but not in regular window

    - by Zack
    I have a PDF which is a presentation exported from OpenOffice. Two of the slides in this presentation have embedded .eps graphs. When I run the presentation using Preview's slideshow mode, the graphs are severely aliased and the axes are illegible. But when I just view the PDF in regular windowed mode, the graphs are properly antialiased and legible. Is there any way to get Preview to do the same display that it does in windowed mode, but in fullscreen (no window title, no menu bar)? (I don't want to just run the presentation from OpenOffice, because OpenOffice shows the same horrible aliasing effects plus it takes about 30 seconds to show the slide. I don't have, and don't want, Acrobat or MS Office. However, please do feel free to suggest other programs for doing PDF-based slideshows.)

    Read the article

  • My Notebook can't reboot after reinstall new operating systems without display driver installed?

    - by RawR Crew
    I have a small problem when I reinstalled my notebook with Windows 7 or Windows XP home edition. the problem is I can't reboot my system if I didn't install display driver (ATI-Radeon). I can't reboot my system because of the restart's button on shut down menu disappear, thats mean the system cant be rebooting. And when I install display driver, the reboot button in shutdown menu will be appear, thats mean I cant access reboot menu. I just want to know, Why does it happen? Does the display driver have influence with the reboot process?

    Read the article

  • Installing Numpy locally

    - by Néstor
    I posted this question originally on StackOverflow, but a user suggested I moved it here so here I go! I have an account in a remote computer without root permissions and I needed to install a local version of Python (the remote computer has a version of Python that is incompatible with some codes I have), Numpy and Scipy there. I've been trying to install numpy locally since yesterday, with no success. I successfully installed a local version of Python (2.7.3) in /home/myusername/.local/, so I access to this version of Python by doing /home/myusername/.local/bin/python. I tried two ways of installing Numpy: I downloaded the lastest stable version of Numpy from the official webpage, unpacked it, got into the unpacked folder and did: /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I get the following error, which is followed by a series of other errors (deriving from this one): gcc -pthread -shared build/temp.linux-x86_64-2.7/numpy/core/blasdot/_dotblas.o -L/usr/local/lib -Lbuild/temp.linux-x86_64-2.7 -lptf77blas -lptcblas -latlas -o build/lib.linux-x86_64-2.7/numpy/core/_dotblas.so /usr/bin/ld: /usr/local/lib/libptcblas.a(cblas_dptgemm.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC Not really knowing what this meant (except that the error apparently has to do with the LAPACK library), I just did the same command as above, but now putting LDFLAGS='-fPIC', as suggested by the error i.e., I did LDFLAGS="-fPIC" /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I got the same error (except that the prefix -fPIC was addeded after the gcc command above). I tried installing it using pip, i.e., doing /home/myusername/.local/bin/pip install numpy /after successfully instaling pip in my local path). However, I get the exact same error. I searched on the web, but none of the errors seemed to be similar to mine. My first guess is that this has to do with some piece of code that needs root permissions to be executed, or maybe with some problem with the version of the LAPACK libraries or with gcc (gcc version 4.1.2 is installed on the remote computer). Help, anyone?

    Read the article

  • windows 7 turns off itself everyday at about 9am

    - by Radek
    I was given this comp at work and after a week or so this strange thing started to happen in the middle of doing something :-( It turns off itself at about 9.10am every morning Just once a day and it works fine after it had it little nap. it happens both if the comp was on all night or I turned it off before leaving the office. I tried to swapped the memory as I was told that there was an issue with memory. But moving or removing any memory did not make any difference. I am not aware that I would install any program that could cause that. I installed AVG and set it up to do every day scan about 8am + if restart is needed it requires user confirmation. 'The Software Protection service has stopped' few minutes before it turned off itself but it happened also at other times without the computer turned off. I turned off Windows automatic updates as the first thing when I got the comp configuration Windows 7 Ultimate Intel Core2 Quad Q9550 at 2.8GH, 8GB RAM ST31000528AS Barracuda 7200.12 SATA 3Gb/s 1TB Update Below message are logged when I turn the comp on again. Message 1: The previous system shutdown at 9:08:54 AM on ?6/?29/?2010 was unexpected. Message 2: Level:Critical Source: Kernel Power EventID 41 Task Category (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Log after manual restart Update 2 (task scheduler)

    Read the article

  • Python not Working in Vim

    - by jdg
    I have a new install of VIM from the automatic windows installer: gvim73_46.exe I have Python 2.7 (32 bit) installed. If I open gvim, and type: :set python? I get E518: Unknown option. If I try typing: :python 'hello' Vim crashes. What could be wrong? Here are the contents of :version in case they are helpful, although python is installed, and it is using Python 2.7. I also checked, and C:\Windows\System32\python27.dll is where it should be... I am really lost here. Does anyone have any ideas as to what is going wrong? VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) MS-Windows 32-bit GUI version with OLE support Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32 system vimrc file: "$VIM\vimrc" user vimrc file: "$HOME_vimrc" 2nd user vimrc file: "$VIM_vimrc" user exrc file: "$HOME_exrc" 2nd user exrc file: "$VIM_exrc" system gvimrc file: "$VIM\gvimrc" user gvimrc file: "$HOME_gvimrc" 2nd user gvimrc file: "$VIM_gvimrc" system menu file: "$VIMRUNTIME\menu.vim" Compilation: cl -c /W3 /nologo -I. -Iproto -DHAVE_PATHDEF -DWIN32 -DFEAT_CSCOPE -DFEAT_NETBEANS_INTG -DFEAT_XPM_W32 -DWINVER=0x0400 -D_WIN32_WINNT=0x0400 /Fo.\ObjGOLYHTR/ /Ox /GL -DNDEBUG /Zl /MT -DFEAT_OLE -DFEAT_MBYTE_IME -DDYNAMIC_IME -DFEAT_GUI_W32 -DDYNAMIC_ICONV -DDYNAMIC_GETTEXT -DFEAT_TCL -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl83.dll\" -DDYNAMIC_TCL_VER=\"8.3\" -DFEAT_PYTHON -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"python27.dll\" -DFEAT_PYTHON3 -DDYNAMIC_PYTHON3 -DDYNAMIC_PYTHON3_DLL=\"python31.dll\" -DFEAT_PERL -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl512.dll\" -DFEAT_RUBY -DDYNAMIC_RUBY -DDYNAMIC_RUBY_VER=191 -DDYNAMIC_RUBY_DLL=\"msvcrt-ruby191.dll\" -DFEAT_BIG /Fd.\ObjGOLYHTR/ /Zi Linking: link /RELEASE /nologo /subsystem:windows /LTCG:STATUS oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib gdi32.lib version.lib winspool.lib comctl32.lib advapi32.lib shell32.lib /machine:i386 /nodefaultlib libcmt.lib oleaut32.lib user32.lib /nodefaultlib:python27.lib /nodefaultlib:python31.lib e:\tcl\lib\tclstub83.lib WSock32.lib e:\xpm\lib\libXpm.lib /PDB:gvim.pdb -debug

    Read the article

  • How can I find the names of AD Group policies that a user/pc is using?

    - by Russ
    I am having trouble locating some settings in group policy so I can make changes due to the convoluted nature of our policies. What I would like to be able to do is go to a specific PC and see what group policies are being applied, so I can focus on those policies. My goal would be to clean up the GP's a bit, while allowing me to "walk the tree" to see what people have implemented and what is worthless. Thanks. EDIT: In this specific case, I am looking to find which GP maped drives are configured in. (User Configuration -- Preferences -- Windows Settings -- Drive Maps)

    Read the article

  • SQL SERVER – Fix: Error: 10920 Cannot drop user-defined function. It is being used as a resource governor classifier

    - by pinaldave
    If you have not read my SQL SERVER – Simple Example to Configure Resource Governor – Introduction to Resource Governor yesterday’s detailed primer on Resource Governor, I suggest you go ahead and read it before continuing this article. After reading the article the very first email I received was as follows: “Pinal, I configured resource governor on my development server and it worked fine with tests I ran. After doing some tests, I decided to remove the resource governor and as a first step I disabled it however, I was not able to drop the classification function during the process of the clean up. It was continuously giving me following error. Msg 10920, Level 16, State 1, Line 1 Cannot drop user-defined function myudfname. It is being used as a resource governor classifier. Would you please give me solution?” The original email was really this short and there is no other information. I am glad he has done experiments on development server and not on the production server. Production server must not be the playground of the experiments. I think I have covered the answer of this error in an earlier blog post. If the user disables the Resource Governor it is still not possible to drop the function because it can be enabled again and when enabled it can still use the same function. Here is the simple resolution of the how one can drop the classifier function (do this only if you are not going to use the function). The reason the classifier function can’t be dropped because it is associated with resource governor. Create a new classified function for your resource governor or just assign NULL as described in the following T-SQL Script and you will be able to drop the function without error. ALTER RESOURCE GOVERNOR WITH (CLASSIFIER_FUNCTION = NULL) GO ALTER RESOURCE GOVERNOR DISABLE GO DROP FUNCTION dbo.UDFClassifier GO I am glad that user asked me question instead of doing something radically different, which can leave the server in the unusable state. I am aware of this only method to avoid this error. Is there any better way to achieve the same? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Securing Mobile Apps in a Bring Your Own Device World

    - by Naresh Persaud
    As more and more business users begin using their personal devices to access corporate information and resources, the number of network access requests has risen dramatically.  Access Management products and strategies that were based on an employee accessing network resources from a single desktop PC were never designed to monitor and manage an employee that is using a desktop and a laptop, a tablet, and a smartphone all from outside the corporate network, and possibly from an unsecured wireless public network. A new approach is needed to manage the types and frequency of mobile app access requests - an integrated Platform Approach to Identity and Access Management that is location and device aware, that can warn you of unusual or high risk access.  A platform that provides standard APIs so you can manage your mobile apps the same way that you manage your enterprise apps. View the slideshow below to see how the Oracle Identity Management platform can help you secure your mobile applications and data in a Bring Your Own Device World. Securing access inabyod-world-final-ext View more PowerPoint from OracleIDM

    Read the article

  • What's new with Java technology? Java Embedded

    - by hinkmond
    As this article points out, Java Embedded is a safer, more robust and easier to develop platform for small networked devices. So, get ready for good things to come from Java Embedded... See: Java Embedded: Next New Thing Here's a quote: Through the past few years the industry as we know it has seen a big boom with the mobile and cloud revolution. Today, there has been an enormous amount of buzz around machine to machine (M2M) or the "Internet of Things," since we are moving into a state where everything is going to have to be interconnected and will have to properly communicate together... Today, Java Embedded provides that platform. I like it! As long as there's no Zombie Apocalypse, I think Java Embedded has a great future! Hinkmond

    Read the article

  • HTML Tidy in NetBeans IDE

    - by Geertjan
    First step in integrating HTML Tidy (via its JTidy implementation) into NetBeans IDE: The reason why I started doing this is because I want to integrate this into the pluggable analyzer functionality of NetBeans IDE that I recently blogged about, i.e., where the FindBugs functionality is found. So a logical first step is to get it working in an Action class, after which I can port it into the analyzer infrastructure: import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.io.IOException; import java.io.PrintWriter; import java.io.StringWriter; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionReferences; import org.openide.awt.ActionRegistration; import org.openide.cookies.EditorCookie; import org.openide.cookies.LineCookie; import org.openide.loaders.DataObject; import org.openide.text.Line; import org.openide.text.Line.ShowOpenType; import org.openide.util.Exceptions; import org.openide.util.NbBundle.Messages; import org.openide.windows.IOProvider; import org.openide.windows.InputOutput; import org.openide.windows.OutputEvent; import org.openide.windows.OutputListener; import org.openide.windows.OutputWriter; import org.w3c.tidy.Tidy; @ActionID(     category = "Tools", id = "org.jtidy.TidyAction") @ActionRegistration(     displayName = "#CTL_TidyAction") @ActionReferences({     @ActionReference(path = "Loaders/text/html/Actions", position = 150),     @ActionReference(path = "Editors/text/html/Popup", position = 750) }) @Messages("CTL_TidyAction=Run HTML Tidy") public final class TidyAction implements ActionListener {     private final DataObject context;     private final OutputWriter writer;     private EditorCookie ec = null;     public TidyAction(DataObject context) {         this.context = context;         ec = context.getLookup().lookup(org.openide.cookies.EditorCookie.class);         InputOutput io = IOProvider.getDefault().getIO("HTML Tidy", false);         io.select();         writer = io.getOut();     }     @Override     public void actionPerformed(ActionEvent ev) {         Tidy tidy = new Tidy();         try {             writer.reset();             StringWriter stringWriter = new StringWriter();             PrintWriter errorWriter = new PrintWriter(stringWriter);             tidy.setErrout(errorWriter);             tidy.parse(context.getPrimaryFile().getInputStream(), System.out);             String[] split = stringWriter.toString().split("\n");             for (final String string : split) {                 final int end = string.indexOf(" c");                 if (string.startsWith("line")) {                     writer.println(string, new OutputListener() {                         @Override                         public void outputLineAction(OutputEvent oe) {                             LineCookie lc = context.getLookup().lookup(LineCookie.class);                             int lineNumber = Integer.parseInt(string.substring(0, end).replace("line ", ""));                             Line line = lc.getLineSet().getOriginal(lineNumber - 1);                             line.show(ShowOpenType.OPEN, Line.ShowVisibilityType.FOCUS);                         }                         @Override                         public void outputLineSelected(OutputEvent oe) {}                         @Override                         public void outputLineCleared(OutputEvent oe) {}                     });                 }             }         } catch (IOException ex) {             Exceptions.printStackTrace(ex);         }     } } The string parsing above is ugly but gets the job done for now. A problem integrating this into the pluggable analyzer functionality is the limitation of its scope. The analyzer lets you select one or more projects, or individual files, but not a folder. So it doesn't work on folders in the Favorites window, for example, which is where I'd like to apply HTML Tidy, across multiple folders via the analyzer functionality. That's a bit of a bummer that I'm hoping to get around somehow.

    Read the article

  • OSCON: Java and a Nice Discount

    - by Tori Wieldt
    Now in its 14th year, OSCON, O'Reilly's annual open source conference, will once again be in Portland, OR on July 16-20, 2012.  Join the world’s open source pioneers, builders, and innovators at the Oregon Convention Center for five intense days to learn about open development, challenge your assumptions, and fire up your brain.With 200+ speakers, 18 tracks, hundreds of technologies, and over 3,000 hackers in attendance, it's a place to learn and network. You’ll find practical tutorials, inspirational keynotes, and a wealth of information on open source languages, platforms, and development. OSCON includes whole track devoted to Java & the JVM, and the list of speakers is impressive. OSCON is where the serious thinkers and doers—and their favorite technologies—converge. And when the day’s sessions are over, join people just like you for some serious fun. Thanks to Java Magazine (you have subscribed to Java Magazine, right? If not, get your free digital subscription now!), you can register for OSCON and save 20% with code JAVAMAG.

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >