Monthly Archives

Articles indexed in March 2012

Page 72/239 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

  - by Victor S

  I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

  Read the article

• What web browsers are there for Ubuntu?

  - by Alvar

  I was wondering what web browsers exist for Ubuntu; I don't want to use wine. I just want the ones written for Ubuntu. I know about Firefox and Google Chrome, you don't need to add them as answers. I've never liked the Ubuntu software center because it never has all of the programs that I might want to install and therefore it's not perfect. I just want a list of all the browsers for Ubuntu and what's the point of them. Example: Firefox: open source, and is pre-installed. Please give me only one browser per answer or this will be confusing.

  Read the article

• PDFtk Password Protection Help

  - by Dave W.

  I am using Ubuntu 11.10 and am looking for a solution to password protect a bunch of pdf files in a directory in batch. I came across PDFtk and it looks like it might do what I need, but I've reviewed the command line PDFtk examples and can't figure out if there is a way to do it in batch without having to individually specify the output file name for every file. I'm hoping a command-line guru can take a look at the PDFtk syntax and tell me if there is some trick / command that will allow me to password protect a directory of pdf files (e.g., *.pdf) and overwrite the existing files using the same name, or consistently rename the individual output files without having to specify each output name individually. Here's a link to the PDFtk command line examples page: http://www.pdflabs.com/tools/pdftk-the-pdf-toolkit/ Thanks for your help. I think I've answered my own question. Here's a bash script that appears to do the trick. I'd welcome help evaluating why the code I've commented out doesn't work... #!/bin/bash # Created by Dave, 2012-02-23 # This script uses PDFtk to password protect every PDF file # in the directory specified. The script creates a directory named "protected_[DATE]" # to hold the password protected version of the files. # # I'm using the "user_pw" parameter, # which means no one will be able to open or view the file without # the password. # # PDFtk must be installed for this script to work. # # Usage: ./protect_with_pdftk.bsh [FILE(S)] # [FILE(S)] can use wildcard expansion (e.g., *.pdf) # This part isn't working.... ignore. The goal is to avoid errors if the # directory to be created already exists by only attempting to create # it if it doesn't exists # #TARGET_DIR="protected_$(date +%F)" #if [ -d "$TARGET_DIR" ] #then #echo # echo "$TARGET_DIR directory exists!" #else #echo # echo "$TARGET_DIR directory does not exist!" #fi # mkdir protected_$(date +%F) for i in *pdf ; do pdftk "$i" output "./protected_$(date +%F)/$i" user_pw [PASSWORD]; done echo "Complete. Output is in the directory: ./protected_$(date +%F)"

  Read the article

• How can I disable recent documents in Unity?

  - by detly

  How do I disable the tracking and display of recently opened files (and whatever else is remembered) in a default installation of Ubuntu 11.10? (Note that this is not a duplicate of How can I keep recent files from appearing in Unity?, since that question and its answers are concerned with temporary and specific filtering. I want to disable it completely for a single user account.) Okay, to deflect the inevitable and expand on my motivation... While trawling the usual forums and Google results for a solution, it (unsurprisingly) seems that the near-universal use cases for this request are either browsing porn or Warhammer research. And the obvious solution to this is to create another user account to contain all evidence. However, this is not why I'm asking, and I don't say that to get all high and mighty about it, it's because this answer won't help. (Even though I really don't have any interest in Warhammer, and I have no idea how that paint pot and brush ended up in my drawer, no that's not glue on my thumb, etc.) My actual use case is that I use my personal laptop for presentations in different circles of my life. I have a user account set up with all the settings I like for presentations (shortcuts, small launcher, default associations, etc). But I don't want an accidental keystroke (or the find dialog) to display other recent presentations I've given, or the files I used in composing the presentation, or whatever. I also don't want to have to recreate this profile for every single presentation I might give. I just want a nice little isolated, memoryless, clean corner of my notebook for public display.

  Read the article

• Analog and digital audio output at the same time

  - by wim

  My speakers use a digital input, but my headphones use an analog input. I have them both plugged in, and when I want to use the headphones I just turn off the speakers and switch on the headphones. I know that simultaneous output on digital and analog is supported by the hardware, because it worked fine in Windows XP. But on Ubuntu, I seem to only get one at a time, depending on which setting is selected in the combo box located at System -> Preferences -> Sound -> Hardware. How can I get simultaneous analog and digital output without having to switch the profile every time? I'm on Ubuntu 11.04 and it's an HDA Intel chip.

  Read the article

• Control mouse pointer with keyboard without a number pad

  - by mloman

  I have dell laptop which does not have a numberpad, only a set of numbers above the qwerty layout. I want to be able to control the mouse cursor with my arrow keys. I activated the mouse keys by going to "System Setting" - "Universal Access" - "Pointing and Clicking" and activate "Mouse Keys" But still, I am unable to control the mouse cursor. How do I get this going so I don't have to take my hands off the keyboard?

  Read the article

• How can I reply to email by sending a delivery failure message?

  - by wau

  Occasionally, I receive unwanted emails, particularly low-volume spam, or email messages falsely addressed to me (possibly due to typos). I don't want to spend the energy to write a personal message, but I do want to let the sender know that the message never arrived at its destination, and that resending it will be useless. In my opinion, a delivery error message to the sender will fill that need. So, the question is if there is an easy way to send error messages back to the sender. Is there any email client out there which supports sending delivery failure messages as a reply to incoming email -- ideally in one click? (Or, which can be configured to do so?) Alternatively, what is the best way to set up an environment that allows me to send delivery failure messages without too much effort per message sent?

  Read the article

• crash when using wireless network

  - by Erik

  ubuntu 12.04 32 bit When I start up my system almost instantly freezes, I found that the problem lays with my wireless network, because the crash is always t the same time as the message that tells me I am connected to a network when I start up connected to a cable everything works fine, I can even see that I am connected to our wireless network, until I unplug the ethernet cable, then it all freezes again the same happened when I boot from a live cd (from usb) The problem only occurs on my netbook, my laptop doesn't give any problems. I don't know if anyone else has had similar problems, or if anyone knows a solution... Thanks in advance! greetings Erik EDIT (21/3/2012): it seems there is some external factor involved, I'm using my netbook for about 50 minutes now while connected to the wireless network, and still it didn't crash strange enough, before these 50 minutes I had to put it down by holding the power button, because I decided to try it again, that time it did crash... before (while connected with an ethernet cable) I've been trying to get my Bluetooth working, that didn't succeed entirely, but I guess that might be a factor in the question why it doesn't crash at the moment now I rebooted, connected, and no crash... if it crashes again, I'll update this post again. in the meantime, if anyone has an idea on what could be a factor, and on how to create a crash using that factor, feel free to ask!

  Read the article

• Can't run TOR from terminal

  - by Thi G.

  So... I can't run TOR from my terminal. I have tried many different things, but I couldn't make it run. Once, it didn't stop to run when I wanted to. At my other attempt I also ended up failing because when it stopped to run I couldn't connect myself to the internet. I hope you can help me here guys. To be more specific, what I mean by "can't run from terminal" is that I can't hide my IP if I'm installing a program from terminal, for instance. Or if I'm running another program that is making a connection with the internet, my IP isn't being hidden. What I want is to make TOR work for all my programs. So my IP would be hidden in any connection with the internet.

  Read the article

• apt-get doesnt download files from NFS location

  - by Pravesh

  I have switched to unix from last 3 months and trying to understand install process and in particular apt-get. I am able to successfully install and download the packages when I configure my repository on http location in /etc/apt/sources.list file. e.g. deb http://web.myspqce.com/u/eng/rose/debian-mirror-squeeze-amd64/mirror/ftp.us.debian.org/debian/ squeeze main contrib non-free This command will download(/var/cache/apt/archive) and install the package when i use apt-get install When I change the source location to file instead of http(nfs mount point), the package is getting installed but NOT getting downloaded in /var/cache/apt/archive. deb file:/deb_repository/debian-mirror-squeeze-amd64/mirror/ftp.us.debian.org/debian/ squeeze main contrib non-free Please let me know if there is any configuration or settings that i have to make to let apt-get to both download and install package when i use (nfs)file:/ instead of http:/ in sources.list. To achieve this, I can use apt-get --downlaod-only and then use apt-get install for both download and install in two separate calls, but I want to know why package is not getting downloaded with apt-get install but only getting installed when used with file:/ in sources.list

  Read the article

• How to stop Thunar being default file browser

  - by Charles Kane

  On a relatively new 11.04 installation Thunar has become the default file browser simply by using it! Whilst I can open Nautilus easily enough, I'd rather it remained as the default, especially when I choose to view files in dual pane. The only action that I can pinpoint that might have given over my files and folders to Thunar is making Nautilus into Nautilus-Elementary (oh and Unity carked it so I reverted rather unwillingly to Classic, glad I did it is so much more stable and this is my production machine and Unity acts as if it is early alpha as far as I can tell!)

  Read the article

• Second monitor not coming back on after going into hibernate

  - by dabraude

  10 and a new problem has come up. When I my machine hibernates the second monitor does not come back on. I did not have this problem in 11.04. The main monitor is plugged into a vga port, and the second plugged into a display port then an adapter to vga the system is a Dell Optiplex 790 and the graphics card is (according to lspci) a VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I am running the classic Gnome desktop though the problem occurs in Unity as well.

  Read the article

• Dell Dell E2009W monitor not detected

  - by Charles

  I have an issue with my monitor. I just installed Ubuntu 11.10, but the monitor that is plugged in doesn't appear anywhere. And by doesn't appear, I mean that in the "Displays" menu, it doesn't even appear as "Unknown", I just have my screen that appears and nothing else. It is connected through VGA, and the monitor is recognized with no problem on Windows 7. It is a Dell monitor. I'm not a pro with Ubuntu, so any help to diagnose the issue would be really helpful (and help me learn how to fix this kind of monitor issue in the future) Thanks !

  Read the article

• Can't remove libreoffice3.5-dict-de package

  - by Aaron Digulla

  I just installed the wrong version of LibreOffice (x86 instead of 64bit). So I tried to remove it but I get this error: > aptitude remove libreoffice3.5-dict-de Couldn't find package "libreoffice3.5-dict-de". However, the following packages contain "libreoffice3.5-dict-de" in their name: libreoffice3.5-dict-de Couldn't find package "libreoffice3.5-dict-de". However, the following packages contain "libreoffice3.5-dict-de" in their name: libreoffice3.5-dict-de No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. The same happens when I try to use "Software Management". What's going on? aptitude: 0.6.4-1ubuntu2 Ubuntu 11.10 oneiric

  Read the article

• Purple start screen - no splash screen

  - by Peter

  After installing Ubuntu 11.10 on a new computer everything worked fine for a few weeks and now suddenly when starting up Ubuntu I get a blank purple screen with no "ubuntu" splash and the 5 dots but the system does start up. What has happened to loose the ubuntu splash screen? Also, I've checked in the grub startup and it has "quiet splash" in the linux line. I have an ATI radeon 5450 graphics card which needed nomodeset to be added to the grub line when booting for the first time off the install CD but now this line has disappeared from the grub startup. Can anyone help. Thanks

  Read the article

• GEO Tool - commercial use

  - by Jens

  what i want to do: offer my clients the possibility to display their store as a small graphic (like google maps). just a small png with the location of the store. only the specific client is able to see this images and he pays for this area (not only for that :) ). So i'm looking for a api or whatever else to geocode(?) the adress and render a small (280*160px) image. google offers a premium licence (not cheap) ms bing openstreetmap - i'm not able to understand the 10^10 licences ;( any ideas?

  Read the article

• How do websites with no content rank so high?

  - by Akito

  I was just searching for, how to close a sim and I got this website on the first page of Google. The website does not have the solution to the problem. there is just a line written about it but the SEO or a trick is played so well that it has got so many real comments. The comments are users asking him to help me close their sims. Now I don't get this. There is no content then how does the site rank so high? Thankyou.

  Read the article

• Run external application on markdown source in ikiwiki

  - by student

  Can I add a button to each wiki page in ikiwiki which launches an external application (on the client side) or script with the markdown code of the current page as input? Edit: I didn't realize that it might be complicated to do it on client side as Zenklys' answer suggested. So perhaps I should describe more concretely what I have in mind: I want to have two buttons: "Get LaTeX" and 2. "Get pdf". Clicking on "Get LaTeX should generate a LaTeX file and the browser should simply open or download that file. Analogously for the pdf. It would even be ok, to have a button "Generate LaTeX" instead, which generates the LaTeX code and changes after the generation to "Get LaTeX" which simply points to the LaTeX file. So it is not really necessary to do the generation of the files on client side. Would be ok, if this is done (on a temporary folder) on server side. For the LaTeX resp. pdf generation I want to use a custom wrapper script for pandoc, let's call it mymarkdown2latex resp. mymarkdown2pdf.

  Read the article

• Magento not responding to payment gateway notifications fast enough or at all?

  - by robgt

  Some of our customers are getting to the confirmation of payment step in purchasing from our Magento store, and then they are getting a timeout error, where the SagePay payment gateway is trying to contact our server to tell it that a payment was successful (or not…) but it cannot contact our server, or cannot get a response from our server in a timely manner, and then the payment/order is being cancelled. I've raised this question to my hosting company, but all they told me was: "This is down to the way the software is configured on your server" This is currently a Magento 1.4.0.1 standard installation as far as payment gateways are concerned. What on earth could this statement mean? Is there some configuration that I need to do to make Magento listen to these requests and respond properly?

  Read the article

• SSL Certificate Works in Monit - But Not in Keystore

  - by Bart Silverstrim

  I have a situation where there's a keystore file with the various root/intermediate certificates stored in it in a way that it seems to work for most browsers. Problem is that when mobile browsers hit it, there's a break in the chain and they complain. I used an SSL checker at http://www.sslshopper.com/ssl-checker.html and it states that "The certificate is not trusted in all web browsers. You may need to install an Intermediate/chain certificate to link it to a trusted root certificate." So...the desktop browsers must have the intermediate certs already and can make the chain connections, I'm assuming, while the mobile browsers can't. The thing is that I had used Portecle to export certificates from the keystore and cobble them together to create a .PEM certificate to run the Monit utility. When I check that application with the SSL checker, it works fine! The person that originally created the keystore said he couldn't follow the SSL provider's directions for creating the keystore because he created the CSR request using openssl, so the cert and private key had to be converted to DER format and use importkey to get it to work; following the directions he found online had importkey seem to use only a set keystore file as a result, and it would erase anything already in the file if it existed. So is there a way to take the certificate I created for Monit and create a working keystore for the Tomcat website? What would be causing the chain to be broken in the current keystore, but work for Monit? I have the SSL cert provider's intermediate and cross certificates, and the website's certificate, but is what else would I need to create a working chain of certs for a keystore?

  Read the article

• How to add SMS text messaging functionality to my website?

  - by jessegavin

  I want to add the ability to send reminders to people via email and SMS for specific events that they have signed up for on a web application that I am building. The email part is not difficult, but I am wondering where to find a good solution for sending SMS messages. It would also be a plus if this solution allowed two-way SMS communication with my web application so that people would be able to reply with a CONFIRM or CANCEL type of a message. Has anyone implemented something like this? Does anyone know of good tools out there? EDIT: I am realizing that this is more of a "lots of ways to skin this cat" type of question and so I changed it to community wiki.

  Read the article

• How can I resize a set of sprite images?

  - by Tyler J Fisher

  Hey StackExchange GameDev community, I'm attempting to resize series of sprites upon instantiation of the class they're located in. I've attempted to use the following code to resize the images, however my attempts have been unsuccessful. I have been unable to write an implementation that is even compilable, so no error codes yet. wLeft.getScaledInstance(wLeft.getWidth()*2, wLeft.getHeight()*2, Image.SCALE_FAST); I've heard that Graphics2D is the best option. Any suggestions? I think I'm probably best off loading the images into a Java project, resizing the images then outputting them to a new directory so as not to have to resize each sprite upon class instantiation. What do you think? Photoshopping each individual sprite is out of the question, unless I used a macro. Code: package game; //Import import java.awt.Image; import javax.swing.ImageIcon; public class Mario extends Human { Image wLeft = new ImageIcon("sprites\\mario\\wLeft.PNG").getImage(); //Constructor public Mario(){ super("Mario", 50); wLeft = wLeft.getScaledInstance(wLeft.getWidth()*2, wLeft.getHeight()*2, Image.SCALE_FAST); }

  Read the article

• SDL beginner: create Rectangle surface filled with color

  - by user3689

  im learning SDL , i like to create Rectangle surface with color that is not image . here is my code that compiles fine but dosnt work : im passing the function this params: SDL_Surface* m_screen = SDL_SetVideoMode(SCREEN_WIDTH,SCREEN_HEIGHT,SCREEN_BPP,SDL_SWSURFACE); SDL_FillRect(m_screen,&m_screen->clip_rect,SDL_MapRGB(m_screen->format,0xFF, 0xFF, 0xFF)); ... Button button(m_screen,0,0,50,50,255,0,0) ... ... Button::Button(SDL_Surface* screen,int x,int y,int w,int h,int R, int G, int B) { SDL_Rect box; SDL_Surface * ButtonSurface; ButtonSurface = NULL ; Uint32 rmask, gmask, bmask, amask; #if SDL_BYTEORDER == SDL_BIG_ENDIAN rmask = 0xff000000; gmask = 0x00ff0000; bmask = 0x0000ff00; amask = 0x000000ff; #else rmask = 0x000000ff; gmask = 0x0000ff00; bmask = 0x00ff0000; amask = 0xff000000; #endif box.x = x; box.y = y; box.w = w; box.h = h; ButtonSurface = SDL_CreateRGBSurface(SDL_SWSURFACE, box.w,box.h, 32, rmask, gmask, bmask, amask); if(ButtonSurface == NULL) { LOG_MSG("Button::Button Button failed"); } SDL_FillRect(screen,&box,SDL_MapRGB ( ButtonSurface->format, R, G, B )); //ut.ApplySurface(0,0,ButtonSurface,screen); SDL_BlitSurface(ButtonSurface,NULL,screen,&box); } what im doing here wrong ?

  Read the article

• 2D non-tile based map editor

  - by user5468

  I am currently developing a relatively simple 2D, topdown oriented adventure game for the iPhone and was wondering what would be the easiest way to create the maps for my game. I figured I would need some kind of visual editor that would give me immediate feedback and would allow me to place all objects in the world exactly where I want them. I could then load the saved representation of the world I create in the editor in my game. So, I am looking for a simple map editor that allows me to do this. All the objects in my game are simply textured rectangles build up from two triangles. All I need to be able to do is position different rectangles/objects in the map, and give them a texture. I am using texture atlases, so it would be useful to be able to assign portions of textures to the objects. I then need to be able to extract all the objects from the saved representation of my maps, together with the name/identifier of the texture(atlas) they use, and the area of the texture atlas. I have looked at some tile-based map editors like Tiled and Ogmo, but they don't seem to be able to do what I want. Any suggestions? EDIT: a more concrete example: something like the GameMaker level editor, but then with added export functionality in a handy format.

  Read the article

• Making a level editor for my game

  - by Sherif Maher Eaid

  I am doing a 2D sprite based game in XNA for WP7, The game logic is simple, you start at some point, you want to avoid obstacles and reach a certain goal. obviously I need to make many levels for the game to be challenging and funny. I am considering making a level editor for my game where I can be able to design the level using some kind of GUI then it translates that to a .lvl or something that the game can read and interpret that to a playable level. I am asking for an already made level editor for XNA/WP7.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >