Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 102/337 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

• How can I keep the cpu temp low?

  - by Newton

  I have an HP pavilion dv7, I'm using ubuntu 12.04 so the overheating problem with sandybridge cpu is a lot better. However my laptop is still becoming too hot to keep on my legs. The problem is that the fan wait too much before starting, so the medium temp is too hight. When I'm using windows 7 the laptop is room-temperature cold, I've absolutely no problem. On windows the fan is always spinning very low & very silently so the heat is continuously removed, without reaching an unconfortable temp. How can I force the computer to act like that also on ubuntu? PS The bios can't let me control this kind of thing, and this is my experience with lm-sensors and fancontrol al@notebook:~$ sudo sensors-detect [sudo] password for al: # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Hewlett-Packard HP Pavilion dv7 Notebook PC (laptop) # Board: Hewlett-Packard 1800 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8518 Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Next adapter: i915 gmbus disabled (i2c-0) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus ssc (i2c-1) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOB (i2c-2) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus vga (i2c-3) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOA (i2c-4) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus panel (i2c-5) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 GPIOC (i2c-6) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus dpc (i2c-7) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOD (i2c-8) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpb (i2c-9) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOE (i2c-10) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus reserved (i2c-11) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpd (i2c-12) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOF (i2c-13) Do you want to scan it? (YES/no/selectively): y Next adapter: DPDDC-B (i2c-14) Do you want to scan it? (YES/no/selectively): y Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK al@notebook:~$ sudo /etc/init.d/module-init-tools restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop module-init-tools ; start module-init-tools. The restart(8) utility is also available. module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools restart stop: Unknown instance: module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools start module-init-tools stop/waiting al@notebook:~$ sudo pwmconfig # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Is my case too desperate?

  Read the article

• I Clobbered a Leopard with a Window Last Night

  - by D'Arcy Lussier

  I’ve had my 15” Mac Book Pro for a little over a year now, and its hands-down the best laptop I’ve ever owned…hardware wise. And I tried, I really really tried, to like OSX. I even bought Parallels so I could run Windows 7 and all my development tools while still trying to live in an OSX world. But in the end, I missed Windows too much. There were just too many shortcomings with OSX that kept me from being productive. For one thing, Office for Mac is *not* Office for Windows. The applications are written by different teams, and Excel on the Mac is just different enough to be painful. The VM experience was adequate, but my MBP would heat up like crazy when running it and the experience trying to get Windows apps to interact with an OSX file system was awkward. And I found I was in the VM more than I thought I’d be. iMovie is not as easy to use for doing simple movie editing as Windows Movie Maker. There’s no free blog editing software for OSX that’s on par with Windows Live Writer. And really, all I was using OSX for was Twitter (which I can use a Windows client for) and web browsing (also something Windows can provide obviously). So I had to ask myself – why am I forcing myself to use an operating system I don’t like, on a laptop that can support Windows 7? And so I paved my MBP and am happily running Windows 7 on it…and its fantastic! All the good stuff with the hardware is still there with the goodness of Win 7. Happy happy. I did run into some snags doing this though, and that’s really what this blog post is about – things to be aware of if you want to install Win 7 directly on your MBP metal. First, Ensure You Have Your Original Mac Install Disk This was a warning my buddy Dylan, who’s been running Win 7 on his MBP for a while now, gave me early on. The reason you need that original disk is that the hardware drivers you need are all located there. Apparently you can’t easily download them, so make sure you have them ahead of time. Second, Forget BootCamp The only reason you need BootCamp is if you still want the option to boot into OSX. If you don’t, then you don’t need BootCamp. In fact, you don’t even need BootCamp to install Win 7. What you *will* need though is a DVD with Win 7 burnt on it. Apple doesn’t support bootable USB drives. Well, actually they do for Mac Book Airs which don’t come with optical drives…but to get it working you’ll need to edit a system file of BootCamp so your make of MBP is included in an XML document, and even then you *still* are using BootCamp meaning you’ll be making an OSX partition. So don’t worry about BootCamp, just burn a Windows 7 disc, put it into the DVD drive, and restart your MBP. Third, Know The Secret Commands So after putting in the Windows 7 DVD and restarting your MBP, you’ll want to hold down the ‘C’ key during boot up. This tells the MBP that it should boot from the DVD drive instead of the hard drive. Interestingly, it appears you don’t have to do this if its the Mac OSX install disc (more on that in a second), but regardless – hold down C and Windows will start the install process. Next up is the partition process. You’ll notice that there’s a partition called ETI or something like that. This has to do with the drive format that Apple uses and how they partition their system drives. What I did – I blew it away! At first I didn’t, but I was told I couldn’t install Windows on the remaining space due to the different drive format. Blowing away the ETI partition (and all other partitions) allowed me to continue the Windows install. *REMEMBER –  No warranty is provided or implied, just telling you what I did and how I got it to work. Ok, so now Windows is installed and I’m rebooting. Everything looks good, but I need drivers! So I put in the OSX install DVD and run the BootCamp assistant which installs all the Windows drivers I need. Fantastic! Oh, I need to restart – no problem. OH NO, PROBLEM! I left the OSX install DVD in the drive and now the MBP wants to boot from the drive and install OSX! I’m not holding down the C key, what the heck?! Ok, well there must be a way to eject this disk…hmm…no physical button on the side…the eject button doesn’t seem to work on the keyboard…no little pin hole to insert something to force the disc out…well what the…?! It turns out, if you want to eject a disc at boot up, you need (and I kid you not) to plug a mouse into the laptop and hold down the right-click button while its booting. This ejected the disc for me. Seriously. Finally, Things You Should Be Aware Of Once you have Windows up and running there’s a few things you need to be aware of, mainly new keyboard shortcuts. For instance, on the Mac keyboard there is no Home, End, PageUp or PageDown. There’s also no obvious way to do something like select large amounts of text (like you would by holding Shift-Home at the end of a line of text for instance). So here’s some shortcuts you need to know: Home – fn + left arrow End – fn + right arrow Select a line of text as you would with the Home key – Shift + fn + left arrow Select a line of text as you would with the End key – Shift + fn + right arrow Page Up – fn + up arrow Page Down – fn + down arrow Also, you’ll notice that the awesome Mac track pad doesn’t respond to taps as clicks. No fear, this is just a setting that needs to be altered in the BootCamp control panel (that controls the Mac Hardware-specific settings within Windows, you can access it easily from the system tray icon) One other thing, battery life seems a bit lower than with OSX, but then again I’m also doing more than Twitter or web browsing on this thing now. Conclusion My laptop runs awesome now that I have Windows 7 on there. It’s obviously up to individual taste, but for me I just didn’t see benefits to living in an OSX world when everything I needed lived in Windows. And also, I finally am back to an operating system that doesn’t require me to eject a USB drive before physically removing it! It’s 2012 folks, how has this not been fixed?! D

  Read the article

• How can I render multiple windows with DirectX 9 in C++?

  - by Friso1990

  I'm trying to render multiple windows, using DirectX 9 and swap chains, but even though I create 2 windows, I only see the first one that I've created. My RendererDX9 header is this: #include <d3d9.h> #include <Windows.h> #include <vector> #include "RAT_Renderer.h" namespace RAT_ENGINE { class RAT_RendererDX9 : public RAT_Renderer { public: RAT_RendererDX9(); ~RAT_RendererDX9(); void Init(RAT_WindowManager* argWMan); void CleanUp(); void ShowWin(); private: LPDIRECT3D9 renderInterface; // Used to create the D3DDevice LPDIRECT3DDEVICE9 renderDevice; // Our rendering device LPDIRECT3DSWAPCHAIN9* swapChain; // Swapchain to make multi-window rendering possible WNDCLASSEX wc; std::vector<HWND> hwindows; void Render(int argI); }; } And my .cpp file is this: #include "RAT_RendererDX9.h" static LRESULT CALLBACK MsgProc( HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam ); namespace RAT_ENGINE { RAT_RendererDX9::RAT_RendererDX9() : renderInterface(NULL), renderDevice(NULL) { } RAT_RendererDX9::~RAT_RendererDX9() { } void RAT_RendererDX9::Init(RAT_WindowManager* argWMan) { wMan = argWMan; // Register the window class WNDCLASSEX windowClass = { sizeof( WNDCLASSEX ), CS_CLASSDC, MsgProc, 0, 0, GetModuleHandle( NULL ), NULL, NULL, NULL, NULL, "foo", NULL }; wc = windowClass; RegisterClassEx( &wc ); for (int i = 0; i< wMan->getWindows().size(); ++i) { HWND hWnd = CreateWindow( "foo", argWMan->getWindow(i)->getName().c_str(), WS_OVERLAPPEDWINDOW, argWMan->getWindow(i)->getX(), argWMan->getWindow(i)->getY(), argWMan->getWindow(i)->getWidth(), argWMan->getWindow(i)->getHeight(), NULL, NULL, wc.hInstance, NULL ); hwindows.push_back(hWnd); } // Create the D3D object, which is needed to create the D3DDevice. renderInterface = (LPDIRECT3D9)Direct3DCreate9( D3D_SDK_VERSION ); // Set up the structure used to create the D3DDevice. Most parameters are // zeroed out. We set Windowed to TRUE, since we want to do D3D in a // window, and then set the SwapEffect to "discard", which is the most // efficient method of presenting the back buffer to the display. And // we request a back buffer format that matches the current desktop display // format. D3DPRESENT_PARAMETERS deviceConfig; ZeroMemory( &deviceConfig, sizeof( deviceConfig ) ); deviceConfig.Windowed = TRUE; deviceConfig.SwapEffect = D3DSWAPEFFECT_DISCARD; deviceConfig.BackBufferFormat = D3DFMT_UNKNOWN; deviceConfig.BackBufferHeight = 1024; deviceConfig.BackBufferWidth = 768; deviceConfig.EnableAutoDepthStencil = TRUE; deviceConfig.AutoDepthStencilFormat = D3DFMT_D16; // Create the Direct3D device. Here we are using the default adapter (most // systems only have one, unless they have multiple graphics hardware cards // installed) and requesting the HAL (which is saying we want the hardware // device rather than a software one). Software vertex processing is // specified since we know it will work on all cards. On cards that support // hardware vertex processing, though, we would see a big performance gain // by specifying hardware vertex processing. renderInterface->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hwindows[0], D3DCREATE_SOFTWARE_VERTEXPROCESSING, &deviceConfig, &renderDevice ); this->swapChain = new LPDIRECT3DSWAPCHAIN9[wMan->getWindows().size()]; this->renderDevice->GetSwapChain(0, &swapChain[0]); for (int i = 0; i < wMan->getWindows().size(); ++i) { renderDevice->CreateAdditionalSwapChain(&deviceConfig, &swapChain[i]); } renderDevice->SetRenderState(D3DRS_CULLMODE, D3DCULL_CCW); // Set cullmode to counterclockwise culling to save resources renderDevice->SetRenderState(D3DRS_AMBIENT, 0xffffffff); // Turn on ambient lighting renderDevice->SetRenderState(D3DRS_ZENABLE, TRUE); // Turn on the zbuffer } void RAT_RendererDX9::CleanUp() { renderDevice->Release(); renderInterface->Release(); } void RAT_RendererDX9::Render(int argI) { // Clear the backbuffer to a blue color renderDevice->Clear( 0, NULL, D3DCLEAR_TARGET, D3DCOLOR_XRGB( 0, 0, 255 ), 1.0f, 0 ); LPDIRECT3DSURFACE9 backBuffer = NULL; // Set draw target this->swapChain[argI]->GetBackBuffer(0, D3DBACKBUFFER_TYPE_MONO, &backBuffer); this->renderDevice->SetRenderTarget(0, backBuffer); // Begin the scene renderDevice->BeginScene(); // End the scene renderDevice->EndScene(); swapChain[argI]->Present(NULL, NULL, hwindows[argI], NULL, 0); } void RAT_RendererDX9::ShowWin() { for (int i = 0; i < wMan->getWindows().size(); ++i) { ShowWindow( hwindows[i], SW_SHOWDEFAULT ); UpdateWindow( hwindows[i] ); // Enter the message loop MSG msg; while( GetMessage( &msg, NULL, 0, 0 ) ) { if (PeekMessage( &msg, NULL, 0U, 0U, PM_REMOVE ) ) { TranslateMessage( &msg ); DispatchMessage( &msg ); } else { Render(i); } } } } } LRESULT CALLBACK MsgProc( HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam ) { switch( msg ) { case WM_DESTROY: //CleanUp(); PostQuitMessage( 0 ); return 0; case WM_PAINT: //Render(); ValidateRect( hWnd, NULL ); return 0; } return DefWindowProc( hWnd, msg, wParam, lParam ); } I've made a sample function to make multiple windows: void RunSample1() { //Create the window manager. RAT_ENGINE::RAT_WindowManager* wMan = new RAT_ENGINE::RAT_WindowManager(); //Create the render manager. RAT_ENGINE::RAT_RenderManager* rMan = new RAT_ENGINE::RAT_RenderManager(); //Create a window. //This is currently needed to initialize the render manager and create a renderer. wMan->CreateRATWindow("Sample 1 - 1", 10, 20, 640, 480); wMan->CreateRATWindow("Sample 1 - 2", 150, 100, 480, 640); //Initialize the render manager. rMan->Init(wMan); //Show the window. rMan->getRenderer()->ShowWin(); } How do I get the multiple windows to work?

  Read the article

• What if &ldquo;Microsoft&rdquo; were in our shoes? About Windows Phone

  - by Vijaya Malla

  This is what I think about Microsoft Windows Phone. If Microsoft were in our shoes looking at various phones available their configurations, memory, front facing cameras etc. Microsoft disappointed the USA customer base again by not getting Nokia Lumia 800. The Past: If we talk few years ago, few business people were on their Blackberry’s and few Gadget lovers were on crappy Windows OS devices. The world was all going right till Apple came with a revolutionary device iPhone, which completely changed our perception towards phone and how great a smartphone can be. It’s not just phone but the whole technology industry. The romantic appealing of the phone and smooth touch and feel of it made everyone to get one of those bad boys. The sales went up for not just Apple for AT&T too. Even though everyone complained about the signal strength of AT&T, everyone wanted to be on it because they have iPhones. All world wanted iPhone back then except Microsoft with few comments on how it is not going to be in market. But it did great and rocked the industry. A few years later with iPhone and Android taking over the smartphone market Microsoft realized that it should be in the game too. Worked on the design of it, and gave us the best Mobile OS ever. Everyone thinks that iOS is a great OS for phones but if you have touched a Windows Phone and use it for real then you will realize the strengths of it. so last year we welcomed Windows Phone 7 The Present : Windows Phone 7 has the fastest growing market. The phones are cheap, you can buy from any carrier out there. The phone became smarter and smarter with the recent update “Mango (7.5)” and with the collaboration with Nokia, Microsoft created a new eco-system for smartphones with the best smartphone hardware and best smartphone software. Everyone in the world was excited about the collaboration. As we fly over cloud 9 imagining about Nokia made Windows Phones we all heard a good news from Nokia “Nokia World”. Nokia showed the world what a best hardware making company can do with Windows Phone 7.5 OS. Nokia Lumia 800 and 710 took the spotlight. Everyone here in USA and all over the world wanted to own a Nokia Lumia 800 because of the design, software, proprietary apps from Nokia (maps, ESPN, drive and music). If USA market had Nokia Lumia 800, then it would have been the best step Microsoft and Nokia had ever made in their history of smartphone market. With all the numbers going to Android and IPhone, its not clear on why Microsoft/Nokia did not release Lumia 800 here in USA. Its unclear if Microsoft had learnt the lesson or not. if it had learnt the lesson I guess Microsoft needs to get the Nokia Lumia 800 to the USA. The Future: This is where we hope we get the best form Microsoft. I was an iPhone user, I used 2G, 3G, 3GS, 4 and then moved to Windows Phone and never felt so happy with my iPhones’. From the day when Nokia announced the partnership with Microsoft and said that they going to come up with a new Nokia windows phone, I was dreaming for my Nokia Phone. but looks like it is not going to happen any time soon. My thoughts about the Market :  Nokia has the biggest market base in the world. Even though people moved to Android or iPhone over the years in other parts of the world like India and China, people still love to use Nokia. Everyone who uses a Windows Phone now will wait for that day when Nokia Lumia comes to the USA but what either or both of the companies should do for a better market share is to make a very aggressive move with the hardware and bet on the devices. I am pretty sure that it will work. everyone here in the USA will like to have a dual core windows phone with front facing camera and all other crazy things that android/apple phones offer. I think we just have to wait for that day and hope that day comes soon. Love Microsoft and Nokia Thank you for reading.

  Read the article

• Ask the Readers: Backing Your Files Up – Local Storage versus the Cloud

  - by Asian Angel

  Backing up important files is something that all of us should do on a regular basis, but may not have given as much thought to as we should. This week we would like to know if you use local storage, cloud storage, or a combination of both to back your files up. Photo by camknows. For some people local storage media may be the most convenient and/or affordable way to back up their files. Having those files stored on media under your control can also provide a sense of security and peace of mind. But storing your files locally may also have drawbacks if something happens to your storage media. So how do you know whether the benefits outweigh the disadvantages or not? Here are some possible pros and cons that may affect your decision to use local storage to back up your files: Local Storage Pros You are in control of your data Your files are portable and can go with you when needed if using external or flash drives Files are accessible without an internet connection You can easily add more storage capacity as needed (additional drives, etc.) Cons You need to arrange room for your storage media (if you have multiple externals drives, etc.) Possible hardware failure No access to your files if you forget to bring your storage media with you or it is too bulky to bring along Theft and/or loss of home with all contents due to circumstances like fire If you are someone who is always on the go and needs to travel as lightly as possible, cloud storage may be the perfect way for you to back up and access your files. Perhaps your laptop has a hard-drive failure or gets stolen…unhappy events to be sure, but you will still have a copy of your files available. Perhaps a company wants to make sure their records, files, and other information are backed up off site in case of a major hardware or system failure…expensive and/or frustrating to fix if it happens, but once again there is a nice backup ready to go once things are fixed. As with local storage, here are some possible pros and cons that may influence your choice of cloud storage to back up your files: Cloud Storage Pros No need to carry around flash or bulky external drives All of your files are accessible wherever there is an internet connection No need to deal with local storage media (or its’ upkeep) Your files are still safe if your home is broken into or other unfortunate circumstances occur Cons Your files and data are not 100% under your control Possible hardware failure or loss of files on the part of your cloud storage provider (this could include a disgruntled employee wreaking havoc) No access to your files if you do not have an internet connection The cloud storage provider may eventually shutdown due to financial hardship or other unforeseen circumstances The possibility of your files and data being stolen by hackers due to a security breach on the part of your cloud storage provider You may also prefer to try and cover all of the possibilities by using both local and cloud storage to back up your files. If something happens to one, you always have the other to fall back on. Need access to those files at or away from home? As long as you have access to either your storage media or an internet connection, you are good to go. Maybe you are getting ready to choose a backup solution but are not sure which one would work better for you. Here is your chance to ask your fellow HTG readers which one they would recommend. Got a great backup solution already in place? Then be sure to share it with your fellow readers! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know Winter Sunset by a Mountain Stream Wallpaper Add Sleek Style to Your Desktop with the Aston Martin Theme for Windows 7 Awesome WebGL Demo – Flight of the Navigator from Mozilla Sunrise on the Alien Desert Planet Wallpaper Add Falling Snow to Webpages with the Snowfall Extension for Opera [Browser Fun] Automatically Keep Up With the Latest Releases from Mozilla Labs in Firefox 4.0

  Read the article

• SQL SERVER – Weekend Project – Experimenting with ACID Transactions, SQL Compliant, Elastically Scalable Database

  - by pinaldave

  Database technology is huge and big world. I like to explore always beyond what I know and share the learning. Weekend is the best time when I sit around download random software on my machine which I like to call as a lab machine (it is a pretty old laptop, hardly a quality as lab machine) and experiment it. There are so many free betas available for download that it’s hard to keep track and even harder to find the time to play with very many of them.  This blog is about one you shouldn’t miss if you are interested in the learning various relational databases. NuoDB just released their Beta 7.  I had already downloaded their Beta 6 and yesterday did the same for 7.   My impression is that they are onto something very very interesting.  In fact, it might be something really promising in terms of database elasticity, scale and operational cost reduction. The folks at NuoDB say they are working on the world’s first “emergent” database which they tout as a brand new transitional database that is intended to dramatically change what’s possible with OLTP.  It is SQL compliant, guarantees ACID transactions, yet scales elastically on heterogeneous and decentralized cloud-based resources. Interesting note for sure, making me explore more. Based on what I’ve seen so far, they are solving the architectural challenge that exists between elastic, cloud-based compute infrastructures designed to scale out in response to workload requirements versus the traditional relational database management system’s architecture of central control. Here’s my experience with the NuoDB Beta 6 so far: First they pretty much threw away all the features you’d associate with existing RDBMS architectures except the SQL and ACID transactions which they were smart to keep.  It looks like they have incorporated a number of the big ideas from various algorithms, systems and techniques to achieve maximum DB scalability. From a user’s perspective, the NuoDB Beta software behaves like any other traditional SQL database and seems to offer all the benefits users have come to expect from standards-based SQL solutions. One of the interesting feature is that one can run a transactional node and a storage node on my Windows laptop as well on other platforms – indeed interesting for sure. It’s quite amazing to see a database elastically scale across machine boundaries. So, one of the basic NuoDB concepts is that as you need to scale out, you can easily use more inexpensive hardware when/where you need it.  This is unlike what we have traditionally done to scale a database for an application – we replace the hardware with something more powerful (faster CPU and Disks). This is where I started to feel like NuoDB is on to something that has the potential to elastically scale on commodity hardware while reducing operational expense for a big OLTP database to a degree we’ve never seen before. NuoDB is able to fully leverage the cloud in an asynchronous and highly decentralized manner – while providing both SQL compliance and ACID transactions. Basically what NuoDB is doing is so new that it is all hard to believe until you’ve experienced it in action.  I will keep you up to date as I test the NuoDB Beta 7 but if you are developing a web-scale application or have an on-premise app you are thinking of moving to the cloud, testing this beta is worth your time. If you do try it, let me know what you think.  Before I say anything more, I am going to do more experiments and more test on this product and compare it with other existing similar products. For me it was a weekend worth spent on learning something new. I encourage you to download Beta 7 version and share your opinions here. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Slow wifi on Ubuntu 12.04 wifi driver ath9k

  - by lunar

  For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

  - by mseika

  Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners  More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

  Read the article

• Introducing Oracle System Assistant

  - by B.Koch

  by Josh Rosen One of the challenges with today's servers is getting the server up and running and understanding what all of the steps are once you plug the server in for the first time. So many different pieces come into play: installing drivers, updating firmware, configuring RAID, and provisioning the operating system. All of these steps must be done before you can even start using the server. Finding the latest firmware and drivers, making sure you have the right versions, and knowing that all the different software and firmware components work together properly can be a real challenge. If not done correctly, such as if you separately downloading disk firmware or controller firmware that doesn't match the existing OS drivers, you could experience bugs, performance problems, and incompatibilities. Gone are the days of having to locate the tools and drivers media that shipped with the server only to find out that newer versions of software and firmware are available on the web. Oracle has solved these challenges in the new X3-2 family of servers by introducing Oracle System Assistant. Oracle System Assistant is an innovative tool that is built-in to every new x86 server. It provides step-by-step assistance with configuring the server, updating firmware and drivers, and provisioning the operating system. Once you have completed all of the steps in the Oracle System Assistant tool, the server is ready to use. Oracle System Assistant was designed to be easy and straightforward. Starting it is as simple as pressing F9 when the server is booting. You'll need a keyboard, monitor, and mouse or you can use the remote console feature of Oracle ILOM (Integrated Lights Out Manager) to access a virtual KVM to the server from any machine. From there Oracle System Assistant will walk you through each of the steps necessary to set up your server. After configuring the network settings for Oracle System Assistant, the next step is to check for any new software or firmware for the server. Oracle System Assistant connects back to Oracle using your My Oracle Support account and downloads any updates that were made available to you for this specific server. This is where you really start to see the innovation that went into Oracle System Assistant. Firmware for Oracle ILOM and BIOS, operating system drivers, and other system firmware (including for option cards and disk drivers) come as a single bundle, downloading as a single unit, that has been engineered and tested to work together by Oracle. Oracle System Assistant figures out the right combination for your server, so you don't have to. Now that the server has the latest firmware, Oracle System Assistant will next walk you through configuring the hardware. From Oracle System Assistant, you can configure many Oracle ILOM settings, including the network settings and initial user accounts. This ensures that ILOM is accessible and ready to use. Oracle System Assistant is where all parts of the server come together. In addition to communicating with Oracle ILOM and interacting with BIOS, Oracle System Assistant understands and can configure the storage subsystem. Before installing the operating system, Oracle System Assistant can detect the storage configuration and configure RAID for all disks in the system. At this point, the server is ready to be provisioned with the host operating system. You can use Oracle System Assistant to provision a supported OS, including Oracle Linux, Oracle VM, RHEL, SuSe Linux, and Windows. And by using Oracle System Assistant, you can be sure that the proper OS drivers are installed for each of the installed hardware components. With Oracle System Assistant, initial setup of the server has never been easier. If we can innovate around problems and find solutions to make our servers easier to manage, this reduces IT costs and makes managing servers simpler. I think with Oracle System Assistant we have done just that. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• BlueTooth not working on my HP Probook 4720s

  - by mtrento

  the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• F# and the rose-tinted reflection

  - by CliveT

  We're already seeing increasing use of many cores on client desktops. It is a change that has been long predicted. It is not just a change in architecture, but our notions of efficiency in a program. No longer can we focus on the asymptotic complexity of an algorithm by counting the steps that a single core processor would take to execute it. Instead we'll soon be more concerned about the scalability of the algorithm and how well we can increase the performance as we increase the number of cores. This may even lead us to throw away our most efficient algorithms, and switch to less efficient algorithms that scale better. We might even be willing to waste cycles in order to speculatively execute at the algorithm rather than the hardware level. State is the big headache in this parallel world. At the hardware level, main memory doesn't necessarily contain the definitive value corresponding to a particular address. An update to a location might still be held in a CPU's local cache and it might be some time before the value gets propagated. To get the latest value, and the notion of "latest" takes a lot of defining in this world of rapidly mutating state, the CPUs may well need to communicate to decide who has the definitive value of a particular address in order to avoid lost updates. At the user program level, this means programmers will need to lock objects before modifying them, or attempt to avoid the overhead of locking by understanding the memory models at a very deep level. I think it's this need to avoid statefulness that has led to the recent resurgence of interest in functional languages. In the 1980s, functional languages started getting traction when research was carried out into how programs in such languages could be auto-parallelised. Sadly, the impracticality of some of the languages, the overheads of communication during this parallel execution, and rapid improvements in compiler technology on stock hardware meant that the functional languages fell by the wayside. The one thing that these languages were good at was getting rid of implicit state, and this single idea seems like a solution to the problems we are going to face in the coming years. Whether these languages will catch on is hard to predict. The mindset for writing a program in a functional language is really very different from the way that object-oriented problem decomposition happens - one has to focus on the verbs instead of the nouns, which takes some getting used to. There are a number of hybrid functional/object languages that have been becoming more popular in recent times. These half-way houses make it easy to use functional ideas for some parts of the program while still allowing access to the underlying object-focused platform without a great deal of impedance mismatch. One example is F# running on the CLR which, in Visual Studio 2010, has because a first class member of the pack. Inside Visual Studio 2010, the tooling for F# has improved to the point where it is easy to set breakpoints and watch values change while debugging at the source level. In my opinion, it is the tooling support that will enable the widespread adoption of functional languages - without this support, people will put off any transition into the functional world for as long as they possibly can. Without tool support it will make it hard to learn these languages. One tool that doesn't currently support F# is Reflector. The idea of decompiling IL to a functional language is daunting, but F# is potentially so important I couldn't dismiss the idea. As I'm currently developing Reflector 6.5, I thought it wise to take four days just to see how far I could get in doing so, even if it achieved little more than to be clearer on how much was possible, and how long it might take. You can read what happened here, and of the insights it gave us on ways to improve the tool.

  Read the article

• Give a session on C++ AMP – here is how

  - by Daniel Moth

  Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• ALC889 - GA-P55-UD4 -no sound - Ubuntu 11.10

  - by george

  I have computer with a Gigabyte P55A-UD4 motherboard. I have on-board audio - Realtek ALC889. I am using Ubuntu 11.10 and have no sound. please please heeeelp :). i have tryed to install high definition audio codecs from realtek but it doesn't work. in bios the azalia codec is turned on. ps : sorry for my english. 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.1 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.2 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.7 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.1 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.2 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.3 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.7 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 04:00.0 IDE interface: Marvell Technology Group Ltd. Device 91a3 (rev 11) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 06:03.0 IDE interface: Integrated Technology Express, Inc. IT8213 IDE Controller 06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) 3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) 3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) 3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) 3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) 3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) aplay -l karta 0: Intel [HDA Intel], urzadzenie 0: ALC889 Analog [ALC889 Analog] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 0: Intel [HDA Intel], urzadzenie 1: ALC889 Digital [ALC889 Digital] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 3: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 7: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 8: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 9: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0

  Read the article

• Oracle Database Upcoming Event dates to know

  - by mandy.ho

  February may be a short month, but it's not short of exciting Oracle events. From information packed "Real Performance Days" to participation in one of the biggest IT Security events - look out for Oracle Database and let us know if you are there with us! Feb 13-18, 2011 - Las Vegas, NV TDWI World Conference Series Join Oracle in highlighting Exadata x2-2 and x2-8, along with Oracle Business Intelligence, Enterprise Performance management and Data Warehousing solutions. Oracle will be presenting a workshop - Oracle Data Integration: Best-of-Breed Solutions for the Enterprise Wednesday, February 16, 2011 7p.m - 9p.m Glen Goodrich, Director of Product Management Christophe Dupupet, Director of Product Management, Data Integration http://events.tdwi.org/events/las-vegas-world-conference-2011/sessions/session-list.aspx Feb 14-17, 2011 - Barcelona, Spain Mobile World Congress MWC is an event where Oracle showcases the near complete breadth and depth of value that our Communications Industry strategy and Hardware and Software Solutions can deliver. Oracle supports Communications Service Providers today and delivers platforms and flexibility primed for the future. Oracle will have a two story Pavilion, along with an Oracle Java and Embedded Solutions Center - App Planet. The Exhibition times are Monday, 14th February 09.00 - 19.00 Tuesday, 15th February 09.00 - 19.00 Wednesday, 16th February 09.00 - 19.00 Thursday, 17th February 09.00 - 16.00 Have questions? Meet with Oracle Sales representatives at the Oracle Café. Open every day from 9am to 17:00pm. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=109912&src=6973382&src=6973382&Act=4 Feb 14-18, 2011 - San Francisco, CA RSA Conference As the world's most complete, open, integrated business software and hardware systems provider, Oracle can uniquely safeguard your information throughout its entire lifecycle. Learn more by attending these sessions: Cloud Computing: A Brave New World for Security and Privacy (CLD-201) Wednesday, February 16 at 8:30 a.m. Databases Under Attack - Securing Heterogeneous Database Infrastructures (DAS-301) Thursday, February 17, 2011 at 8:30 a.m. Seven Steps to Protecting Databases (DAS-402) Friday, February 18 at 10:10 a.m. RSA Conference Attendees will also have the opportunity to meet with Oracle Security Solution experts, see live product demos and more by visiting booth # 1559. Hours: Monday, February 14, 6:00 p.m. - 8:00 p.m., Tuesday, February 15, 11:00 a.m. - 6:00 p.m. and 4:30 p.m. - 6:00p.m., Wednesday, February 16, 11:00 a.m. - 6:00 p.m., and Thursday, February 17, 11:00 a.m. - 3:00 p.m. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=127657&src=6967733&src=6967733&Act=12 Feb 21-25, 2011 - Various Locations IOUG Presents - A Day of Real World Performance with Tom Kyte, Andrew Holdsworth and Graham Wood These Oracle experts will debate, discuss and delineate the best practices for designing hardware architectures, deploying Oracle databases, and developing applications that deliver the fastest possible performance for your business.Topics are covered in a conversational format - with all three chiming in where appropriate. Each presenter has their own screen projector to demonstrate their individual points to the participants. Customers will have the opportunity to get their specific performance/tuning questions answered and learn how to balance all the different environmental requirements for their applications to improve performance. Register today for the following dates and locations • February 21 in San Diego, CA • February 22 in Los Angeles, CA • February 23 in Seattle, WA • February 25 in Phoenix, AZ http://www.ioug.org/tabid/194/Default.aspx Feb 8-24 - Various Oracle Enterprise Cloud Summit This series of full-day events with cloud experts, sharing real-world best practices, reference architectures and more continues during the month of February. Attend the Oracle Enterprise Cloud Summit to learn how to: • Build a state-of-the-art cloud architecture • Leverage your existing IT investments • Optimize your IT management processes Whether you are considering a move to cloud computing or have already adopted a cloud model, this event offers you the insights you need to take full advantage of cloud computing. Check below to see if the event is coming to a city near you. http://www.oracle.com/us/corporate/events/cloud-events-214342.html

  Read the article

• Radeon Mobility HD 5470 Not Working

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• How can I best manage making open source code releases from my company's confidential research code?

  - by DeveloperDon

  My company (let's call them Acme Technology) has a library of approximately one thousand source files that originally came from its Acme Labs research group, incubated in a development group for a couple years, and has more recently been provided to a handful of customers under non-disclosure. Acme is getting ready to release perhaps 75% of the code to the open source community. The other 25% would be released later, but for now, is either not ready for customer use or contains code related to future innovations they need to keep out of the hands of competitors. The code is presently formatted with #ifdefs that permit the same code base to work with the pre-production platforms that will be available to university researchers and a much wider range of commercial customers once it goes to open source, while at the same time being available for experimentation and prototyping and forward compatibility testing with the future platform. Keeping a single code base is considered essential for the economics (and sanity) of my group who would have a tough time maintaining two copies in parallel. Files in our current base look something like this: > // Copyright 2012 (C) Acme Technology, All Rights Reserved. > // Very large, often varied and restrictive copyright license in English and French, > // sometimes also embedded in make files and shell scripts with varied > // comment styles. > > > ... Usual header stuff... > > void initTechnologyLibrary() { > nuiInterface(on); > #ifdef UNDER_RESEARCH > holographicVisualization(on); > #endif > } And we would like to convert them to something like: > // GPL Copyright (C) Acme Technology Labs 2012, Some rights reserved. > // Acme appreciates your interest in its technology, please contact [email protected] > // for technical support, and www.acme.com/emergingTech for updates and RSS feed. > > ... Usual header stuff... > > void initTechnologyLibrary() { > nuiInterface(on); > } Is there a tool, parse library, or popular script that can replace the copyright and strip out not just #ifdefs, but variations like #if defined(UNDER_RESEARCH), etc.? The code is presently in Git and would likely be hosted somewhere that uses Git. Would there be a way to safely link repositories together so we can efficiently reintegrate our improvements with the open source versions? Advice about other pitfalls is welcome.

  Read the article

• Crime Scene Investigation: SQL Server

  - by Rodney Landrum

  “The packages are running slower in Prod than they are in Dev” My week began with this simple declaration from one of our lead BI developers, quickly followed by an emailed spreadsheet demonstrating that, over 5 executions, an extensive ETL process was running average 630 seconds faster on Dev than on Prod. The situation needed some scientific investigation to determine why the same code, the same data, the same schema would yield consistently slower results on a more powerful server. Prod had yet to be officially christened with a “Go Live” date so I had the time, and having recently been binge watching CSI: New York, I also had the inclination. An inspection of the two systems, Prod and Dev, revealed the first surprise: although Prod was indeed a “bigger” system, with double the amount of RAM of Dev, the latter actually had twice as many processor cores. On neither system did I see much sign of resources being heavily taxed, while the ETL process was running. Without any real supporting evidence, I jumped to a conclusion that my years of performance tuning should have helped me avoid, and that was that the hardware differences explained the better performance on Dev. We spent time setting up a Test system, similarly scoped to Prod except with 4 times the cores, and ported everything across. The results of our careful benchmarks left us truly bemused; the ETL process on the new server was slower than on both other systems. We burned more time tweaking server configurations, monitoring IO and network latency, several times believing we’d uncovered the smoking gun, until the results of subsequent test runs pitched us back into confusion. Finally, I decided, enough was enough. Hadn’t I learned very early in my DBA career that almost all bottlenecks were caused by code and database design, not hardware? It was time to get back to basics. With over 100 SSIS packages and hundreds of queries, each handling specific tasks such as file loads, bulk inserts, transforms, logging, and so on, the task seemed formidable. And yet, after barely an hour spent with Profiler, Extended Events, and wait statistics DMVs, I had a lead in the shape of a query that joined three tables, containing millions of rows, returned 3279 results, but performed 239K logical reads. As soon as I looked at the execution plans for the query in Dev and Test I saw the culprit, an implicit conversion warning on a join predicate field that was numeric in one table and a varchar(50) in another! I turned this information over to the BI developers who quickly resolved the data type mismatches and found and fixed “several” others as well. After the schema changes the same query with the same databases ran in under 1 second on all systems and reduced the logical reads down to fewer than 300. The analysis also revealed that on Dev, the ETL task was pulling data across a LAN, whereas Prod and Test were connected across slower WAN, in large part explaining why the same process ran slower on the latter two systems. Loading the data locally on Prod delivered a further 20% gain in performance. As we progress through our DBA careers we learn valuable lessons. Sometimes, with a project deadline looming and pressure mounting, we choose to forget them. I was close to giving into the temptation to throw more hardware at the problem. I’m pleased at least that I resisted, though I still kick myself for not looking at the code on day one. It can seem a daunting prospect to return to the fundamentals of the code so close to roll out, but with the right tools, and surprisingly little time, you can collect the evidence that reveals the true problem. It is a lesson I trust I will remember for my next 20 years as a DBA, if I’m ever again tempted to bypass the evidence.

  Read the article

• Wireless cycling between connected and disconnected

  - by Tony Kilgore

  My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

  Read the article

• Give a session on C++ AMP – here is how

  - by Daniel Moth

  Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Artec TV18R Tuner not working :(

  - by Antillar Maximus

  Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

  Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >