Search Results

Search found 26004 results on 1041 pages for 'debian based'.

Page 1025/1041 | < Previous Page | 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032  | Next Page >

• Elfsign Object Signing on Solaris

  - by danx

  Elfsign Object Signing on Solaris Don't let this happen to you—use elfsign! Solaris elfsign(1) is a command that signs and verifies ELF format executables. That includes not just executable programs (such as ls or cp), but other ELF format files including libraries (such as libnvpair.so) and kernel modules (such as autofs). Elfsign has been available since Solaris 10 and ELF format files distributed with Solaris, since Solaris 10, are signed by either Sun Microsystems or its successor, Oracle Corporation. When an ELF file is signed, elfsign adds a new section the ELF file, .SUNW_signature, that contains a RSA public key signature and other information about the signer. That is, the algorithm used, algorithm OID, signer CN/OU, and time stamp. The signature section can later be verified by elfsign or other software by matching the signature in the file agains the ELF file contents (excluding the signature). ELF executable files may also be signed by a 3rd-party or by the customer. This is useful for verifying the origin and authenticity of executable files installed on a system. The 3rd-party or customer public key certificate should be installed in /etc/certs/ to allow verification by elfsign. For currently-released versions of Solaris, only cryptographic framework plugin libraries are verified by Solaris. However, all ELF files may be verified by the elfsign command at any time. Elfsign Algorithms Elfsign signatures are created by taking a digest of the ELF section contents, then signing the digest with RSA. To verify, one takes a digest of ELF file and compares with the expected digest that's computed from the signature and RSA public key. Originally elfsign took a MD5 digest of a SHA-1 digest of the ELF file sections, then signed the resulting digest with RSA. In Solaris 11.1 then Solaris 11.1 SRU 7 (5/2013), the elfsign crypto algorithms available have been expanded to keep up with evolving cryptography. The following table shows the available elfsign algorithms: Elfsign Algorithm Solaris Release Comments elfsign sign -F rsa_md5_sha1   S10, S11.0, S11.1 Default for S10. Not recommended* elfsign sign -F rsa_sha1 S11.1 Default for S11.1. Not recommended elfsign sign -F rsa_sha256 S11.1 patch SRU7+   Recommended ___ *Most or all CAs do not accept MD5 CSRs and do not issue MD5 certs due to MD5 hash collision problems. RSA Key Length. I recommend using RSA-2048 key length with elfsign is RSA-2048 as the best balance between a long expected "life time", interoperability, and performance. RSA-2048 keys have an expected lifetime through 2030 (and probably beyond). For details, see Recommendation for Key Management: Part 1: General, NIST Publication SP 800-57 part 1 (rev. 3, 7/2012, PDF), tables 2 and 4 (pp. 64, 67). Step 1: create or obtain a key and cert The first step in using elfsign is to obtain a key and cert from a public Certificate Authority (CA), or create your own self-signed key and cert. I'll briefly explain both methods. Obtaining a Certificate from a CA To obtain a cert from a CA, such as Verisign, Thawte, or Go Daddy (to name a few random examples), you create a private key and a Certificate Signing Request (CSR) file and send it to the CA, following the instructions of the CA on their website. They send back a signed public key certificate. The public key cert, along with the private key you created is used by elfsign to sign an ELF file. The public key cert is distributed with the software and is used by elfsign to verify elfsign signatures in ELF files. You need to request a RSA "Class 3 public key certificate", which is used for servers and software signing. Elfsign uses RSA and we recommend RSA-2048 keys. The private key and CSR can be generated with openssl(1) or pktool(1) on Solaris. Here's a simple example that uses pktool to generate a private RSA_2048 key and a CSR for sending to a CA: $ pktool gencsr keystore=file format=pem outcsr=MYCSR.p10 \ subject="CN=canineswworks.com,OU=Canine SW object signing" \ outkey=MYPRIVATEKEY.key $ openssl rsa -noout -text -in MYPRIVATEKEY.key Private-Key: (2048 bit) modulus: 00:d2:ef:42:f2:0b:8c:96:9f:45:32:fc:fe:54:94: . . . [omitted for brevity] . . . c9:c7 publicExponent: 65537 (0x10001) privateExponent: 26:14:fc:49:26:bc:a3:14:ee:31:5e:6b:ac:69:83: . . . [omitted for brevity] . . . 81 prime1: 00:f6:b7:52:73:bc:26:57:26:c8:11:eb:6c:dc:cb: . . . [omitted for brevity] . . . bc:91:d0:40:d6:9d:ac:b5:69 prime2: 00:da:df:3f:56:b2:18:46:e1:89:5b:6c:f1:1a:41: . . . [omitted for brevity] . . . f3:b7:48:de:c3:d9:ce:af:af exponent1: 00:b9:a2:00:11:02:ed:9a:3f:9c:e4:16:ce:c7:67: . . . [omitted for brevity] . . . 55:50:25:70:d3:ca:b9:ab:99 exponent2: 00:c8:fc:f5:57:11:98:85:8e:9a:ea:1f:f2:8f:df: . . . [omitted for brevity] . . . 23:57:0e:4d:b2:a0:12:d2:f5 coefficient: 2f:60:21:cd:dc:52:76:67:1a:d8:75:3e:7f:b0:64: . . . [omitted for brevity] . . . 06:94:56:d8:9d:5c:8e:9b $ openssl req -noout -text -in MYCSR.p10 Certificate Request: Data: Version: 2 (0x2) Subject: OU=Canine SW object signing, CN=canineswworks.com Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: 00:d2:ef:42:f2:0b:8c:96:9f:45:32:fc:fe:54:94: . . . [omitted for brevity] . . . c9:c7 Exponent: 65537 (0x10001) Attributes: Signature Algorithm: sha1WithRSAEncryption b3:e8:30:5b:88:37:68:1c:26:6b:45:af:5e:de:ea:60:87:ea: . . . [omitted for brevity] . . . 06:f9:ed:b4 Secure storage of RSA private key. The private key needs to be protected if the key signing is used for production (as opposed to just testing). That is, protect the key to protect against unauthorized signatures by others. One method is to use a PIN-protected PKCS#11 keystore. The private key you generate should be stored in a secure manner, such as in a PKCS#11 keystore using pktool(1). Otherwise others can sign your signature. Other secure key storage mechanisms include a SCA-6000 crypto card, a USB thumb drive stored in a locked area, a dedicated server with restricted access, Oracle Key Manager (OKM), or some combination of these. I also recommend secure backup of the private key. Here's an example of generating a private key protected in the PKCS#11 keystore, and a CSR. $ pktool setpin # use if PIN not set yet Enter token passphrase: changeme Create new passphrase: Re-enter new passphrase: Passphrase changed. $ pktool gencsr keystore=pkcs11 label=MYPRIVATEKEY \ format=pem outcsr=MYCSR.p10 \ subject="CN=canineswworks.com,OU=Canine SW object signing" $ pktool list keystore=pkcs11 Enter PIN for Sun Software PKCS#11 softtoken: Found 1 asymmetric public keys. Key #1 - RSA public key: MYPRIVATEKEY Here's another example that uses openssl instead of pktool to generate a private key and CSR: $ openssl genrsa -out cert.key 2048 $ openssl req -new -key cert.key -out MYCSR.p10 Self-Signed Cert You can use openssl or pktool to create a private key and a self-signed public key certificate. A self-signed cert is useful for development, testing, and internal use. The private key created should be stored in a secure manner, as mentioned above. The following example creates a private key, MYSELFSIGNED.key, and a public key cert, MYSELFSIGNED.pem, using pktool and displays the contents with the openssl command. $ pktool gencert keystore=file format=pem serial=0xD06F00D lifetime=20-year \ keytype=rsa hash=sha256 outcert=MYSELFSIGNED.pem outkey=MYSELFSIGNED.key \ subject="O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com" $ pktool list keystore=file objtype=cert infile=MYSELFSIGNED.pem Found 1 certificates. 1. (X.509 certificate) Filename: MYSELFSIGNED.pem ID: c8:24:59:08:2b:ae:6e:5c:bc:26:bd:ef:0a:9c:54:de:dd:0f:60:46 Subject: O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com Issuer: O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com Not Before: Oct 17 23:18:00 2013 GMT Not After: Oct 12 23:18:00 2033 GMT Serial: 0xD06F00D0 Signature Algorithm: sha256WithRSAEncryption $ openssl x509 -noout -text -in MYSELFSIGNED.pem Certificate: Data: Version: 3 (0x2) Serial Number: 3496935632 (0xd06f00d0) Signature Algorithm: sha256WithRSAEncryption Issuer: O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com Validity Not Before: Oct 17 23:18:00 2013 GMT Not After : Oct 12 23:18:00 2033 GMT Subject: O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com Subject Public Key Info: Public Key Algorithm: rsaEncryption Public-Key: (2048 bit) Modulus: 00:bb:e8:11:21:d9:4b:88:53:8b:6c:5a:7a:38:8b: . . . [omitted for brevity] . . . bf:77 Exponent: 65537 (0x10001) Signature Algorithm: sha256WithRSAEncryption 9e:39:fe:c8:44:5c:87:2c:8f:f4:24:f6:0c:9a:2f:64:84:d1: . . . [omitted for brevity] . . . 5f:78:8e:e8 $ openssl rsa -noout -text -in MYSELFSIGNED.key Private-Key: (2048 bit) modulus: 00:bb:e8:11:21:d9:4b:88:53:8b:6c:5a:7a:38:8b: . . . [omitted for brevity] . . . bf:77 publicExponent: 65537 (0x10001) privateExponent: 0a:06:0f:23:e7:1b:88:62:2c:85:d3:2d:c1:e6:6e: . . . [omitted for brevity] . . . 9c:e1:e0:0a:52:77:29:4a:75:aa:02:d8:af:53:24: c1 prime1: 00:ea:12:02:bb:5a:0f:5a:d8:a9:95:b2:ba:30:15: . . . [omitted for brevity] . . . 5b:ca:9c:7c:19:48:77:1e:5d prime2: 00:cd:82:da:84:71:1d:18:52:cb:c6:4d:74:14:be: . . . [omitted for brevity] . . . 5f:db:d5:5e:47:89:a7:ef:e3 exponent1: 32:37:62:f6:a6:bf:9c:91:d6:f0:12:c3:f7:04:e9: . . . [omitted for brevity] . . . 97:3e:33:31:89:66:64:d1 exponent2: 00:88:a2:e8:90:47:f8:75:34:8f:41:50:3b:ce:93: . . . [omitted for brevity] . . . ff:74:d4:be:f3:47:45:bd:cb coefficient: 4d:7c:09:4c:34:73:c4:26:f0:58:f5:e1:45:3c:af: . . . [omitted for brevity] . . . af:01:5f:af:ad:6a:09:bf Step 2: Sign the ELF File object By now you should have your private key, and obtained, by hook or crook, a cert (either from a CA or use one you created (a self-signed cert). The next step is to sign one or more objects with your private key and cert. Here's a simple example that creates an object file, signs, verifies, and lists the contents of the ELF signature. $ echo '#include <stdio.h>\nint main(){printf("Hello\\n");}'>hello.c $ make hello cc -o hello hello.c $ elfsign verify -v -c MYSELFSIGNED.pem -e hello elfsign: no signature found in hello. $ elfsign sign -F rsa_sha256 -v -k MYSELFSIGNED.key -c MYSELFSIGNED.pem -e hello elfsign: hello signed successfully. format: rsa_sha256. signer: O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com. signed on: October 17, 2013 04:22:49 PM PDT. $ elfsign list -f format -e hello rsa_sha256 $ elfsign list -f signer -e hello O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com $ elfsign list -f time -e hello October 17, 2013 04:22:49 PM PDT $ elfsign verify -v -c MYSELFSIGNED.key -e hello elfsign: verification of hello failed. format: rsa_sha256. signer: O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com. signed on: October 17, 2013 04:22:49 PM PDT. Signing using the pkcs11 keystore To sign the ELF file using a private key in the secure pkcs11 keystore, replace "-K MYSELFSIGNED.key" in the "elfsign sign" command line with "-T MYPRIVATEKEY", where MYPRIVATKEY is the pkcs11 token label. Step 3: Install the cert and test on another system Just signing the object isn't enough. You need to copy or install the cert and the signed ELF file(s) on another system to test that the signature is OK. Your public key cert should be installed in /etc/certs. Use elfsign verify to verify the signature. Elfsign verify checks each cert in /etc/certs until it finds one that matches the elfsign signature in the file. If one isn't found, the verification fails. Here's an example: $ su Password: # rm /etc/certs/MYSELFSIGNED.key # cp MYSELFSIGNED.pem /etc/certs # exit $ elfsign verify -v hello elfsign: verification of hello passed. format: rsa_sha256. signer: O=Canine Software Works, OU=Self-signed CA, CN=canineswworks.com. signed on: October 17, 2013 04:24:20 PM PDT. After testing, package your cert along with your ELF object to allow elfsign verification after your cert and object are installed or copied. Under the Hood: elfsign verification Here's the steps taken to verify a ELF file signed with elfsign. The steps to sign the file are similar except the private key exponent is used instead of the public key exponent and the .SUNW_signature section is written to the ELF file instead of being read from the file. Generate a digest (SHA-256) of the ELF file sections. This digest uses all ELF sections loaded in memory, but excludes the ELF header, the .SUNW_signature section, and the symbol table Extract the RSA signature (RSA-2048) from the .SUNW_signature section Extract the RSA public key modulus and public key exponent (65537) from the public key cert Calculate the expected digest as follows:     signaturepublicKeyExponent % publicKeyModulus Strip the PKCS#1 padding (most significant bytes) from the above. The padding is 0x00, 0x01, 0xff, 0xff, . . ., 0xff, 0x00. If the actual digest == expected digest, the ELF file is verified (OK). Further Information elfsign(1), pktool(1), and openssl(1) man pages. "Signed Solaris 10 Binaries?" blog by Darren Moffat (2005) shows how to use elfsign. "Simple CLI based CA on Solaris" blog by Darren Moffat (2008) shows how to set up a simple CA for use with self-signed certificates. "How to Create a Certificate by Using the pktool gencert Command" System Administration Guide: Security Services (available at docs.oracle.com)

  Read the article

• More CPU cores may not always lead to better performance – MAXDOP and query memory distribution in spotlight

  - by sqlworkshops

  More hardware normally delivers better performance, but there are exceptions where it can hinder performance. Understanding these exceptions and working around it is a major part of SQL Server performance tuning.   When a memory allocating query executes in parallel, SQL Server distributes memory to each task that is executing part of the query in parallel. In our example the sort operator that executes in parallel divides the memory across all tasks assuming even distribution of rows. Common memory allocating queries are that perform Sort and do Hash Match operations like Hash Join or Hash Aggregation or Hash Union.   In reality, how often are column values evenly distributed, think about an example; are employees working for your company distributed evenly across all the Zip codes or mainly concentrated in the headquarters? What happens when you sort result set based on Zip codes? Do all products in the catalog sell equally or are few products hot selling items?   One of my customers tested the below example on a 24 core server with various MAXDOP settings and here are the results:MAXDOP 1: CPU time = 1185 ms, elapsed time = 1188 msMAXDOP 4: CPU time = 1981 ms, elapsed time = 1568 msMAXDOP 8: CPU time = 1918 ms, elapsed time = 1619 msMAXDOP 12: CPU time = 2367 ms, elapsed time = 2258 msMAXDOP 16: CPU time = 2540 ms, elapsed time = 2579 msMAXDOP 20: CPU time = 2470 ms, elapsed time = 2534 msMAXDOP 0: CPU time = 2809 ms, elapsed time = 2721 ms - all 24 cores.In the above test, when the data was evenly distributed, the elapsed time of parallel query was always lower than serial query.   Why does the query get slower and slower with more CPU cores / higher MAXDOP? Maybe you can answer this question after reading the article; let me know: [email protected].   Well you get the point, let’s see an example.   The best way to learn is to practice. To create the below tables and reproduce the behavior, join the mailing list by using this link: www.sqlworkshops.com/ml and I will send you the table creation script.   Let’s update the Employees table with 49 out of 50 employees located in Zip code 2001. update Employees set Zip = EmployeeID / 400 + 1 where EmployeeID % 50 = 1 update Employees set Zip = 2001 where EmployeeID % 50 != 1 go update statistics Employees with fullscan go   Let’s create the temporary table #FireDrill with all possible Zip codes. drop table #FireDrill go create table #FireDrill (Zip int primary key) insert into #FireDrill select distinct Zip from Employees update statistics #FireDrill with fullscan go  Let’s execute the query serially with MAXDOP 1. --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --First serially with MAXDOP 1 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 1) goThe query took 1011 ms to complete.   The execution plan shows the 77816 KB of memory was granted while the estimated rows were 799624.  No Sort Warnings in SQL Server Profiler.  Now let’s execute the query in parallel with MAXDOP 0. --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --In parallel with MAXDOP 0 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 0) go The query took 1912 ms to complete.  The execution plan shows the 79360 KB of memory was granted while the estimated rows were 799624.  The estimated number of rows between serial and parallel plan are the same. The parallel plan has slightly more memory granted due to additional overhead. Sort properties shows the rows are unevenly distributed over the 4 threads.   Sort Warnings in SQL Server Profiler.   Intermediate Summary: The reason for the higher duration with parallel plan was sort spill. This is due to uneven distribution of employees over Zip codes, especially concentration of 49 out of 50 employees in Zip code 2001. Now let’s update the Employees table and distribute employees evenly across all Zip codes.   update Employees set Zip = EmployeeID / 400 + 1 go update statistics Employees with fullscan go  Let’s execute the query serially with MAXDOP 1. --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --Serially with MAXDOP 1 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 1) go   The query took 751 ms to complete.  The execution plan shows the 77816 KB of memory was granted while the estimated rows were 784707.  No Sort Warnings in SQL Server Profiler.   Now let’s execute the query in parallel with MAXDOP 0. --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --In parallel with MAXDOP 0 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 0) go The query took 661 ms to complete.  The execution plan shows the 79360 KB of memory was granted while the estimated rows were 784707.  Sort properties shows the rows are evenly distributed over the 4 threads. No Sort Warnings in SQL Server Profiler.    Intermediate Summary: When employees were distributed unevenly, concentrated on 1 Zip code, parallel sort spilled while serial sort performed well without spilling to tempdb. When the employees were distributed evenly across all Zip codes, parallel sort and serial sort did not spill to tempdb. This shows uneven data distribution may affect the performance of some parallel queries negatively. For detailed discussion of memory allocation, refer to webcasts available at www.sqlworkshops.com/webcasts.     Some of you might conclude from the above execution times that parallel query is not faster even when there is no spill. Below you can see when we are joining limited amount of Zip codes, parallel query will be fasted since it can use Bitmap Filtering.   Let’s update the Employees table with 49 out of 50 employees located in Zip code 2001. update Employees set Zip = EmployeeID / 400 + 1 where EmployeeID % 50 = 1 update Employees set Zip = 2001 where EmployeeID % 50 != 1 go update statistics Employees with fullscan go  Let’s create the temporary table #FireDrill with limited Zip codes. drop table #FireDrill go create table #FireDrill (Zip int primary key) insert into #FireDrill select distinct Zip       from Employees where Zip between 1800 and 2001 update statistics #FireDrill with fullscan go  Let’s execute the query serially with MAXDOP 1. --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --Serially with MAXDOP 1 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 1) go The query took 989 ms to complete.  The execution plan shows the 77816 KB of memory was granted while the estimated rows were 785594. No Sort Warnings in SQL Server Profiler.  Now let’s execute the query in parallel with MAXDOP 0. --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --In parallel with MAXDOP 0 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 0) go The query took 1799 ms to complete.  The execution plan shows the 79360 KB of memory was granted while the estimated rows were 785594.  Sort Warnings in SQL Server Profiler.    The estimated number of rows between serial and parallel plan are the same. The parallel plan has slightly more memory granted due to additional overhead.  Intermediate Summary: The reason for the higher duration with parallel plan even with limited amount of Zip codes was sort spill. This is due to uneven distribution of employees over Zip codes, especially concentration of 49 out of 50 employees in Zip code 2001.   Now let’s update the Employees table and distribute employees evenly across all Zip codes. update Employees set Zip = EmployeeID / 400 + 1 go update statistics Employees with fullscan go Let’s execute the query serially with MAXDOP 1. --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --Serially with MAXDOP 1 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 1) go The query took 250  ms to complete.  The execution plan shows the 9016 KB of memory was granted while the estimated rows were 79973.8.  No Sort Warnings in SQL Server Profiler.  Now let’s execute the query in parallel with MAXDOP 0.  --Example provided by www.sqlworkshops.com --Execute query with uneven Zip code distribution --In parallel with MAXDOP 0 set statistics time on go declare @EmployeeID int, @EmployeeName varchar(48),@zip int select @EmployeeName = e.EmployeeName, @zip = e.Zip from Employees e       inner join #FireDrill fd on (e.Zip = fd.Zip)       order by e.Zip option (maxdop 0) go The query took 85 ms to complete.  The execution plan shows the 13152 KB of memory was granted while the estimated rows were 784707.  No Sort Warnings in SQL Server Profiler.    Here you see, parallel query is much faster than serial query since SQL Server is using Bitmap Filtering to eliminate rows before the hash join.   Parallel queries are very good for performance, but in some cases it can hinder performance. If one identifies the reason for these hindrances, then it is possible to get the best out of parallelism. I covered many aspects of monitoring and tuning parallel queries in webcasts (www.sqlworkshops.com/webcasts) and articles (www.sqlworkshops.com/articles). I suggest you to watch the webcasts and read the articles to better understand how to identify and tune parallel query performance issues.   Summary: One has to avoid sort spill over tempdb and the chances of spills are higher when a query executes in parallel with uneven data distribution. Parallel query brings its own advantage, reduced elapsed time and reduced work with Bitmap Filtering. So it is important to understand how to avoid spills over tempdb and when to execute a query in parallel.   I explain these concepts with detailed examples in my webcasts (www.sqlworkshops.com/webcasts), I recommend you to watch them. The best way to learn is to practice. To create the above tables and reproduce the behavior, join the mailing list at www.sqlworkshops.com/ml and I will send you the relevant SQL Scripts.   Register for the upcoming 3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop in London, United Kingdom during March 15-17, 2011, click here to register / Microsoft UK TechNet.These are hands-on workshops with a maximum of 12 participants and not lectures. For consulting engagements click here.   Disclaimer and copyright information:This article refers to organizations and products that may be the trademarks or registered trademarks of their various owners. Copyright of this article belongs to R Meyyappan / www.sqlworkshops.com. You may freely use the ideas and concepts discussed in this article with acknowledgement (www.sqlworkshops.com), but you may not claim any of it as your own work. This article is for informational purposes only; you use any of the suggestions given here entirely at your own risk.   Register for the upcoming 3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop in London, United Kingdom during March 15-17, 2011, click here to register / Microsoft UK TechNet.These are hands-on workshops with a maximum of 12 participants and not lectures. For consulting engagements click here.   R Meyyappan [email protected] LinkedIn: http://at.linkedin.com/in/rmeyyappan  

  Read the article

• top tweets WebLogic Partner Community – June 2012

  - by JuergenKress

  Send your tweets @wlscommunity #WebLogicCommunity and follow us at http://twitter.com/wlscommunity OTNArchBeat? Free Virtual Developer Day: Oracle ADF and Oracle Fusion Middleware Development http://bit.ly/MxuNAg AMIS, Oracle & Java? Checklist veearts nu ook op iPad. @amis_services Mobile integratie met Oracle Fusion Middleware http://dld.bz/buwsM #OSB #SOA WhitehorsesWhiteblog: Troubleshoot JVM crashes of Weblogic: CompilerThread (http://bit.ly/KcGzZK) Jon petter hjulstad E-vita is now Apps Grid Specialized! ODTUG Fusion Middleware Sessions RT @OTNArchBeat: ODTUG Kscope12 - June 24-28 - San Antonio, TX http://bit.ly/LlWkNV OTNArchBeat? Free Event: Modern #Java Development, in/outside the Enterprise - May 30 - Redwood Shores, CA http://bit.ly/LfB79a ADF Community DE? Oracle Advanced ADF 11g Partner Workshop Düsseldorf /Germany (english) June 26-29, click here to see Nicolas Lorain? Best Practices for #JavaFX 2 Enterprise Applications (Part Two) http://buff.ly/Lk1DBn by Jim Weaver shay shmeltzer? #Oracle Developers in #Israel - don't miss the free #ADF workshop July 2nd - get hands-on with Oracle ADF -here OTNArchBeat? Java at JAXconf | Tori Wieldt http://bit.ly/LdoLS2 Anand Akela? #Oracle Customers and Partners – Get your free pass to @CloudExpo in New York, June 11 to 14, http://goo.gl/RpYFT <- Stop by booth #511 OracleSupport_WLS? Did you know that since 3/15/12 #WebLogic Server 12.1.1.0 is certified for production with JDK 7? http://bit.ly/IYJE0L Sharat? Highly useful #JavaFX best practices blog by @JavaFXpert More details here ADF EMG How to set up a productive ADF Dev Env - discussion started by @baigsorcl. Click here to Read and comment. OracleSupport_WLS Upcoming #webcast: Diagnosing #weblogic performance issues through #java thread dumps http://bit.ly/M4O9qF My Oracle Support? New to Oracle Support? - Webcast on Support Basics webcast May 22 10:30 Central Europe. Register @ http://bit.ly/J8o0WG Mohamad Afshar? Cloud Expo – Oracle Customers and Partners – get your free pass to Cloud Expo in New York, June 11 to 14, http://goo.gl/RpYFT OTNArchBeat Oracle VM 3.1 is here | @Ronenkofman http://bit.ly/JriWTq Oracle Exalogic? RT @D0uglasPhillips: ExalogicTV New Video Introducing Oracle Secure Global Desktop for #Exalogic!! http://bit.ly/nwkrCu OracleBlogs? Java EE6 and WebLogic YouTube video channels http://ow.ly/1jVcYJ Oracle WebLogic RT @aleftik: Excited to spend some time today playing around with the WebSockets SDK http://bit.ly/NoTtri WebLogic Community Java EE6 and WebLogic YouTube video channels http://wp.me/p1LMIb-h0 OracleSupport_WLS New tutorial! How to use the #JMS #API to create a message producer with #GlassFish and #NetBeans http://bit.ly/Juqjn JDeveloper & ADF? Tip when installing JDeveloper 11.1.2.2.0 version http://dlvr.it/1b48s1 WebLogic Community Middleware Oracle Excellence Awards 2012 – HAPPY NEW YEAR! Click here to read WebLogicCommunity #opn #oracle#Specialization #opnaward Steven Davelaar? Improve performance of your ADF app using lazy, on-demand querying of detail view objects: Click here OracleBlogs? Middleware Oracle Excellence Awards 2012 & HAPPY NEW YEAR! http://ow.ly/1kahzZ OracleSupport_WLS Upgrading from #weblogic 9.2.x to 10.3.x? http://bit.ly/Kqzl9N AMIS, Oracle & Java “@JDeveloper: Logout from an ADF application http://dlvr.it/1fQBnm” WebLogic Community UK OUG call for papers–your middleware success! Click here #UKOUG #soacommunity #OPN Whitehorses Whiteblog: Enterprise Manager: Manage your Fusion Middleware logfiles (http://bit.ly/KQlZkR) WebLogic Community? @Jphjulstad HI Jon, should we send Pizza when you go in production with your WebLogic 12c project? Whish you success! #WebLogicCommunity Sabine Leitner ADF Einsteigerworkshops je 2 Tage im Juni in HAM, BLN, HANN #Oracle #WLS http://bit.ly/LcOIzB @OracleWebLogic @OracleAppGrid@soacommunity Andreas Koop new post Java Heap Monitor in JDeveloper http://bit.ly/LgSk85 Sabine Leitner? #Oracle Kundentag mit Vorträgen von Sparkasse, Schufa, LBBW, Allianz über FMW & Exa Lösungen! 21.06. FRA http://bit.ly/JtwE3v @wlscommunity NetBeans Team RT @chadlung: Installing and configuring #NetBeans 7.1.2 and the #Java JDK 1.7 on OS X: http://www.giantflyingsaucer.com/blog/p=3760 #osx WebLogic Community Happy New Year #WeblogicCommunity thanks for the business! Time for a drink http://pic.twitter.com/K34KFbvH WebLogic Community UK OUG call for papers&ndash;your middleware success! http://wp.me/p1LMIb-gU WebLogic Community? Middleware Oracle Excellence Awards 2012 - HAPPY NEW YEAR! http://wp.me/p1LMIb-h6 Oracle WebLogic? RT @wlscommunity: WebLogic World Record Two Processor Result with SPECjEnterprise2010 Benchmark Click here to read #weblogic #sunfire #li Marc? Relocate wlst script for all the logfiles in your domain @wlscommunity, http://tinyurl.com/btbjcco WebLogic Community WebLogic World Record Two Processor Result with SPECjEnterprise2010 Benchmark Click here #WebLogicCommunity #weblogic #sunfire Oracle WebLogic MIss a WebLogic Devcast webinar? Catch any of the replays in the series on-demand! #WebLogic #JavaEE #coherence http://bit.ly/LNGa4p JDeveloper & ADF? Bean DataControl - Edit table records http://dlvr.it/1ZWqCx Justin Kestelyn? Contents of "Virtual Developer Day: Java SE 7 and JavaFX 2.0" are now avail on demand; no reg http://tinyurl.com/78nxnyo Frank Nimphius? Preparing 12c new features for DOAG 2012 Development - June 14th in Bonn (http://development.doag.org) WebLogic Community? Middleware Oracle Excellence Awards 2012&ndash;HAPPY NEW YEAR! http://wp.me/p1LMIb-he JDeveloper & ADF Placeholder Watermarks with ADF 11.1.2 http://dlvr.it/1ZWDc9 Oracle ACE Program? May edition #ACE newsletter now available online. http://bit.ly/LKA2de chriscmuir New blog post: Which JDeveloper is right for me? http://bit.ly/J8sj9e GlassFish? Transactional Interceptors in Java EE 7 - Request for feedback: Linda described how EJB's container-managed tr http://bit.ly/KKuGNJ OracleEnterpriseMgr Oracle Application Testing Suite 12.1 Debuts at StarEast 2012 http://ow.ly/aXcv8 #em12c JAX London First set of speaker session announced for #JAXLondon see: http://bit.ly/L0HSME OTNArchBeat? Oracle Cloud Conference: dates and locations worldwide http://bit.ly/JgNeID NetBeans Team? Video: Create and debug a TestNG test class in #NetBeans IDE: http://ow.ly/b7NEW NetBeans Team #NetBeans tip: Code Template for #Kohana #PHP Framework: http://ow.ly/aWIvY Robin? Started to use the #Oracle #WebLogic Server #Maven Plugin. Really awesome to install a complete #WLS with "mvn wls:install" !@wlscommunity OTNArchBeat? Free Event: Modern #Java Development, in/outside the Enterprise - May 30 - Redwood Shores, CA http://bit.ly/JIN9tf OracleBlogs WebLogic Partner Community Newsletter May 2012 http://ow.ly/1k5TeG Java Certification? Java SE 7 Fundamentals course now available On Demand. Watch a preview now: http://ow.ly/aWYgD Whitehorses Whiteblog: Native IO in WebLogic on Solaris 11 X64 (http://bit.ly/KGM4mp) NetBeans Team? Quick video of FindBugs Integration in #NetBeans IDE 7.2: http://ow.ly/aNece NetBeans Team #JavaFX Scene Builder Docs Updated for 2.2 and #NetBeans 7.2 dev builds: http://ow.ly/b7Nie Duncan Mills? New blog posting on implementing input field watermarks with ADF Faces 11.1.2 Click here #adf WebLogic Community? WebLogic Partner Community Newsletter May 2012 http://wp.me/p1LMIb-h4 OracleBlogs? UK OUG call for papersyour middleware success! http://ow.ly/1jNs49 Nicolas Lorain? Java tip: Deploying #JavaFX apps to multiple environments - JavaWorld http://buff.ly/KDADvu Adam Bien? Java EE and How to Specify The Unconventional With Convention Over Configuration [Free Article]: The free http://bit.ly/JEUkUf Owen Hughes and team?#Oracle #Exalogic #Performance: What? How? Why? Click here GlassFish? SecuritEE in the Cloud: Java EE 7 and the Cloud theme continue to move full steam ahead. In a PaaS environment http://bit.ly/K2RPte JDeveloper & ADF? How to Align Managed Bean Scope and Bean Data Control in Oracle ADF http://dlvr.it/1dngxQ Andrejus Baranovskis Missing New Feature in JDev (11.1.2.2.0) - ADF Methods Security http://fb.me/1jQM1enls OracleSupport_WLS? Tutorial on managing #HTTP Sessions in a #Weblogic #Cluster http://bit.ly/JshESe Oracle WebLogic? ZeroTurnaround developer report: #Spring keeps getting heavier, and #Java EE keeps getting lighter http://bit.ly/JDmKy2 JDeveloper & ADF? How to Search in Views - Part 4 || Oracle ADF http://dlvr.it/1dpDjZ WebLogic Community Java Message Service with Java and Spring Framework on Oracle WebLogic; Webcast May 15th 2012 http://wp.me/p1LMIb-gS Andreas Koop? new post ADF Bug or Feature? Non-Breaking Space outside required icon style http://bit.ly/KDZnUo Oracle WebLogic? Don't miss this month's WebLogic DevCast: WebLogic JMS and Spring JMS http://bit.ly/J6g2ST Tuesday May 15th 10:00am PT JDeveloper & ADF How To Disable SELECT COUNT Execution for ADF Table Rendering http://dlvr.it/1dqKH6 OracleSupport_WLS? #SSL and security has its own Information Center, http://bit.ly/LP8Vil for troubleshooting, install, config and more NetBeans Team? Featured #NetBeans plugin is @Codename_One for creating native apps for major mobile platforms: http://plugins.netbeans.org/ JDeveloper & ADF? Using JDeveloper HTTP Analyser to intercept/forward requests http://dlvr.it/1Yzl4J Nicolas Lorain? Create native looks for JavaFX applications: JavaFX-CSS-Themes · http://buff.ly/M0jel0 by Gregg Setzer Devoxx? Want to make the world a better place? Then get involved in Random Hacks of Kindness on June 2 - 3 in Belgium @ http://www.rhok.be #RHoK WebLogic Community top tweets WebLogic Partner Community – May 2012 Click here #WebLogicCommunity Michel Schildmeijer Oracle Traffic Director 11g http://lnkd.in/-mm3Vy Andrejus Baranovskis? Proactively Monitoring JDeveloper 11g IDE Heap Memory http://fb.me/16YZErPrx Arun Gupta? 80+ attendees building a #javaee6 application using NetBeans/WebLogic at Java Day, Istanbul fun times! http://pic.twitter.com/odY19daW A. Chatziantoniou? Just registered for the Oracle FMW Summer Camp in Lisbon. Looking forward to learn, meet friends and try to buy ice cream on the beach OTNArchBeat Another Myth Debunked: 200 Continuous Redeployments with WebLogic|@munz http://bit.ly/JiPyM7 Oracle WebLogic? Need to learn more on #WebLogic Server #JVM performance tuning? http://bit.ly/MN UxHx GlassFish? Dukes Choice Awards 2012 Nominations Are Open: 2012 Duke's Choice Award are open for nominations. These awards http://bit.ly/Ksk4U3 Justin Kestelyn? Major cloud-related announcements from Larry Ellison and Mark Hurd on June 6 http://bit.ly/KTJiII Nicolas Lorain Transparent Windows (Stage) with #JavaFX 2 : Adam Bien's Weblog http://j.mp/INgq8K WebLogic Community Web Services with JAX and Spring on WebLogic–Webcast May 30th 2012 #WebLogicCommunity #weblogic #opn JDeveloper & ADF Oracle ADF - How to work with Dates http://dlvr.it/1Y70zw OracleBlogs Web Services with JAX and Spring on WebLogicWebcast May 30th 2012 http://ow.ly/1k2WtO Adam Bien? Summer Java EE Workshops: 23.05, Amsterdam Airport Java EE Hacking, Without Airport. The dutch version of Airport http://bit.ly/JeP6hV JDeveloper & ADF ADF 11g: BC4J or EJB3. http://bit.ly/JVVFZF ADF EMG? Great discussion with JSF guru Andy Schwartz on the forum - 38 posts! Check it out: here Devoxx? Oracle (http://www.oracle.com ) joins Devoxx 2012 as the first Premium partner, welcome aboard! Nicolas Lorain Developing a Simple Todo Application using #JavaFX, #Java and #MongoDB- Part-1JavaBeat http://j.mp/IDGxLA Nicolas Lorain Preview of JavaFX 2.2 canvas feature > Harmonic Code: Death bitmaps could be beautiful... Part I http://buff.ly/KyAXg5 #JavaFX OTNArchBeat?? New York Coherence Special Interest Group (NYCSIG) - May 24 - NYC http://bit.ly/JzJcbT WebLogic Community iAS upgrade to WebLogic watch #C2B2 online seminar http://youtu.be/5m2CNUjBIGQ #WebLogicCommunity Ruth Collett? Join Oracle in #Joburg on May 21 for OTN Developer Day - sessions on #Java #JavaEE 6/7 and much more! http://bit.ly/IENwnD WebLogic Community? Sending out invitations to our advanced Fusion Middleware Summer Camps! Want to learn more register for the community Ruth Collett? Join @ArunGupta in Istanbul this Monday to hear the latest on #JavaEE 6/7 http://bit.ly/Je63cc GlassFish? NetBeans 7.2 Beta - Built for Speed, Deploy Apps to Oracle Cloud: NetBeans 7.2 Beta is now available. The http://bit.ly/LxMMTK Lucas Jellema My latest SlideShare upload : Java ain't scary - introducing Java to PL/SQ. here via @slideshare JDeveloper & ADF? #Developer #free#ADF training in #Scotland - June 13. More information: http://bit.ly/LbPLlf AMIS, Oracle & Java? AMIS behaalt als eerste in Nedeland de Oracle ADF specialisatie - Channelworld nieuwsChannelconnect: http://bit.ly/JzAcB4 WebLogic Community Web Services with JAX and Spring on WebLogic&ndash;Webcast May 30th 2012 http://wp.me/p1LMIb-gX Nicolas Lorain?@ JavaFX-based SimpleDateFormat Demonstrator http://j.mp/KFCVOi #JavaFX via Dustin Marx Oracle Exalogic? Are you an Oracle partner? There's news on the Oracle Partner Network about #Exalogic specializations - http://bit.ly/Mt3ANY JDeveloper & ADF Shorter URL for your ADF application http://dlvr.it/1XqNLY OTNArchBeat? Bay Area Coherence Special Interest Group (BACSIG) Meeting June 7 http://bit.ly/JAa0Lx OTNArchBeat? Java EE 6 Sample Application on WebLogic 12c: Conference Planner | @arungupta http://bit.ly/LPvof4 JDeveloper & ADF? Excellent example of Oracle ADF - Google Maps/Earth integration http://dlvr.it/1cbc80 JDeveloper & ADF Setting Up JDeveloper's Embedded WLS for MySQL http://dlvr.it/1c4b8P JDeveloper & ADF? Solution for Sharing Global User Data in ADF BC http://dlvr.it/1cc7SJ Java? Java Magazine May/June #javaee #javafx #javame #openJDK #hotspot #wicket #lotsmore http://ow.ly/aX07v Oracle WebLogic? http://bit.ly/JxQsnS if you have trouble finding the right #patchset when doing an upgrade to your #weblogic server OracleEnterpriseMgr 15 minutes to go before we start our Application Testing Suite 12.1 webcast. http://bit.ly/JHyTEe Learn from the lead PM what's new. #em12c Sten Vesterli Eating your own dog food - Oracle support site finally in ADF: http://lnkd.in/s6hg_p Adam Bien Project: "Jenever" (=poison) checked-in with GIT:here CU at http://workshops.adam-bien.com. Thanks for attending! OTNArchBeat Web Service Development with NetBeans and Testing with WebLogic Admin Console | @munz http://bit.ly/JcWk34 Please feel free to send us your news! And add your blog to our SOA blog wiki

  Read the article

• Ball to Ball Collision - Detection and Handling

  - by Simucal

  With the help of the Stack Overflow community I've written a pretty basic-but fun physics simulator. You click and drag the mouse to launch a ball. It will bounce around and eventually stop on the "floor". My next big feature I want to add in is ball to ball collision. The ball's movement is broken up into a x and y speed vector. I have gravity (small reduction of the y vector each step), I have friction (small reduction of both vectors each collision with a wall). The balls honestly move around in a surprisingly realistic way. I guess my question has two parts: What is the best method to detect ball to ball collision? Do I just have an O(n^2) loop that iterates over each ball and checks every other ball to see if it's radius overlaps? What equations do I use to handle the ball to ball collisions? Physics 101 How does it effect the two balls speed x/y vectors? What is the resulting direction the two balls head off in? How do I apply this to each ball? Handling the collision detection of the "walls" and the resulting vector changes were easy but I see more complications with ball-ball collisions. With walls I simply had to take the negative of the appropriate x or y vector and off it would go in the correct direction. With balls I don't think it is that way. Some quick clarifications: for simplicity I'm ok with a perfectly elastic collision for now, also all my balls have the same mass right now, but I might change that in the future. In case anyone is interested in playing with the simulator I have made so far, I've uploaded the source here (EDIT: Check the updated source below). Edit: Resources I have found useful 2d Ball physics with vectors: 2-Dimensional Collisions Without Trigonometry.pdf 2d Ball collision detection example: Adding Collision Detection Success! I have the ball collision detection and response working great! Relevant code: Collision Detection: for (int i = 0; i < ballCount; i++) { for (int j = i + 1; j < ballCount; j++) { if (balls[i].colliding(balls[j])) { balls[i].resolveCollision(balls[j]); } } } This will check for collisions between every ball but skip redundant checks (if you have to check if ball 1 collides with ball 2 then you don't need to check if ball 2 collides with ball 1. Also, it skips checking for collisions with itself). Then, in my ball class I have my colliding() and resolveCollision() methods: public boolean colliding(Ball ball) { float xd = position.getX() - ball.position.getX(); float yd = position.getY() - ball.position.getY(); float sumRadius = getRadius() + ball.getRadius(); float sqrRadius = sumRadius * sumRadius; float distSqr = (xd * xd) + (yd * yd); if (distSqr <= sqrRadius) { return true; } return false; } public void resolveCollision(Ball ball) { // get the mtd Vector2d delta = (position.subtract(ball.position)); float d = delta.getLength(); // minimum translation distance to push balls apart after intersecting Vector2d mtd = delta.multiply(((getRadius() + ball.getRadius())-d)/d); // resolve intersection -- // inverse mass quantities float im1 = 1 / getMass(); float im2 = 1 / ball.getMass(); // push-pull them apart based off their mass position = position.add(mtd.multiply(im1 / (im1 + im2))); ball.position = ball.position.subtract(mtd.multiply(im2 / (im1 + im2))); // impact speed Vector2d v = (this.velocity.subtract(ball.velocity)); float vn = v.dot(mtd.normalize()); // sphere intersecting but moving away from each other already if (vn > 0.0f) return; // collision impulse float i = (-(1.0f + Constants.restitution) * vn) / (im1 + im2); Vector2d impulse = mtd.multiply(i); // change in momentum this.velocity = this.velocity.add(impulse.multiply(im1)); ball.velocity = ball.velocity.subtract(impulse.multiply(im2)); } Source Code: Complete source for ball to ball collider. Binary: Compiled binary in case you just want to try bouncing some balls around. If anyone has some suggestions for how to improve this basic physics simulator let me know! One thing I have yet to add is angular momentum so the balls will roll more realistically. Any other suggestions? Leave a comment!

  Read the article

• CodePlex Daily Summary for Saturday, February 19, 2011

  CodePlex Daily Summary for Saturday, February 19, 2011Popular ReleasesAdvanced Explorer for Wp7: Advanced Explorer for Wp7 Version 1.4 Test8: Added option to run under Lockscreen. Fixed a bug when you open a pdf/mobi file without starting adobe reader/amazon kindle first boost loading time for folders added \Windows directory (all devices) you can now interact with the filesystem while it is loading!Game Files Open - Map Editor: Game Files Open - Map Editor Beta 2 v1.0.0.0: The 2° beta release of the Map Editor, we have fixed a big bug of the files regen.Document.Editor: 2011.6: Whats new for Document.Editor 2011.6: New Left to Right and Left to Right support New Indent more/less support Improved Home tab Improved Tooltips/shortcut keys Minor Bug Fix's, improvements and speed upsCatel - WPF and Silverlight MVVM library: 1.2: Catel history ============= (+) Added (*) Changed (-) Removed (x) Error / bug (fix) For more information about issues or new feature requests, please visit: http://catel.codeplex.com =========== Version 1.2 =========== Release date: ============= 2011/02/17 Added/fixed: ============ (+) DataObjectBase now supports Isolated Storage out of the box: Person.Save(myStream) stores a whole object graph in Silverlight (+) DataObjectBase can now be converted to Json via Person.ToJson(); (+)...??????????: All-In-One Code Framework ??? 2011-02-18: ?????All-In-One Code Framework?2011??????????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????，?????AzureBingMaps??????，??Azure，WCF, Silverlight, Window Phone????????，????????????????????????。 ???： Windows Azure SQL Azure Windows Azure AppFabric Windows Live Messenger Connect Bing Maps ?????： ??????HTML??? ??Windows PC?Mac?Silverlight??? ??Windows Phone?Silverlight??? ?????：http://blog.csdn.net/sjb5201/archive/2011...Image.Viewer: 2011: First version of 2011Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...VsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 29 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 29 (beta)New: Added VsTortoise Solution Explorer integration for Web Project Folder, Web Folder and Web Item. Fix: TortoiseProc was called with invalid parameters, when using TSVN 1.4.x or older #7338 (thanks psifive) Fix: Add-in does not work, when "TortoiseSVN/bin" is not added to PATH environment variable #7357 Fix: Missing error message when ...Sense/Net CMS - Enterprise Content Management: SenseNet 6.0.3 Community Edition: Sense/Net 6.0.3 Community Edition We are happy to introduce you the latest version of Sense/Net with integrated ECM Workflow capabilities! In the past weeks we have been working hard to migrate the product to .Net 4 and include a workflow framework in Sense/Net built upon Windows Workflow Foundation 4. This brand new feature enables developers to define and develop workflows, and supports users when building and setting up complicated business processes involving content creation and response...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.11): Features Added a new option that allows properties on data contract types to be marked as virtual. Bug Fixes Fixed a bug caused by certain project properties not being available on Web Service Software Factory projects. Fixed a bug that could result in the WrapperName value of the MessageContractAttribute being incorrect when the Adjust Casing option is used. The menu item code now caters for CommandBar instances that are not available. For example the Web Item CommandBar does not exist ...Terminals: Version 2 - RC1: The "Clean Install" will overwrite your log4net configuration (if you have one). If you run in a Portable Environment, you can use the "Clean Install" and target your portable folder. Tested and it works fine. Changes for this release: Re-worked on the Toolstip settings are done, just to avoid the vs.net clash with auto-generating files for .settings files. renamed it to .settings.config Packged both log4net and ToolStripSettings files into the installer Upgraded the version inform...AllNewsManager.NET: AllNewsManager.NET 1.3: AllNewsManager.NET 1.3. This new version provide several new features, improvements and bug fixes. Some new features: Online Users. Avatars. Copy function (to create a new article from another one). SEO improvements (friendly urls). New admin buttons. And more...Facebook Graph Toolkit: Facebook Graph Toolkit 0.8: Version 0.8 (15 Feb 2011)moved to Beta stage publish photo feature "email" field of User object added new Graph Api object: Group, Event new Graph Api connection: likes, groups, eventsDJME - The jQuery extensions for ASP.NET MVC: DJME2 -The jQuery extensions for ASP.NET MVC beta2: The source code and runtime library for DJME2. For more product info you can goto http://www.dotnetage.com/djme.html What is new ?The Grid extension added The ModelBinder added which helping you create Bindable data Action. The DnaFor() control factory added that enabled Model bindable extensions. Enhance the ListBox , ComboBox data binding.Jint - Javascript Interpreter for .NET: Jint - 0.9.0: New CLR interoperability features Many bugfixesBuild Version Increment Add-In Visual Studio: Build Version Increment v2.4.11046.2045: v2.4.11046.2045 Fixes and/or Improvements:Major: Added complete support for VC projects including .vcxproj & .vcproj. All padding issues fixed. A project's assembly versions are only changed if the project has been modified. Minor Order of versioning style values is now according to their respective positions in the attributes i.e. Major, Minor, Build, Revision. Fixed issue with global variable storage with some projects. Fixed issue where if a project item's file does not exist, a ...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.1: Coding4Fun.Phone.Toolkit v1.1 release. Bug fixes and minor feature requests addedTV4Home - The all-in-one TV solution!: 0.1.0.0 Preview: This is the beta preview release of the TV4Home software.Finestra Virtual Desktops: 1.2: Fixes a few minor issues with 1.1 including the broken per-desktop backgrounds Further improves the speed of switching desktops A few UI performance improvements Added donations linksNuGet: NuGet 1.1: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. The URL to the package OData feed is: http://go.microsoft.com/fwlink/?LinkID=206669 To see the list of issues fixed in this release, visit this our issues list A...New ProjectsComplexityEvolution: Research projectCRM 2011 Metadata Browser: The CRM 2011 Metadata Browser is a Silverlight 4 application that is packaged as a Managed CRM Solution. This tool allows you to view metadata including Entities, Attributes and Relationships. The 2011 SOAP endpoint is used to connect to CRM using the Organization.svc/web serviceEFCFvsNH3: A sample project that shows the main differences between Entity Framework Code First and Nhibernate 3: -Mapping -Configuration -DB Initialization -Query API -Session & Transaction -ValidationE-Teacher for IELTS preparation: E-teacher helps IELTS students prepare for the IELTS Academic and General Training test. Qualified English Teachers can register to the e-community and helps candidates to understand what they really need to improve for the IELTS exam and how to reach for the maximum band score.FIM CM Extensions: Extensions for Forefront Identity Manager 2010 to enable integration between the FIM Service workflow and the FIM Certificate Management workflow. Game Files Open - Map Editor: This is a map editor for the metin2 clients, it's very simple edit or create a map with this tool.Garbage Collection Sample Code: Garbage collection sample code demonstrates the differences between the large and small object heaps. This code supports the blog post at http://www.deepcode.co.ukGardenersWorld: The aim of gardenersWorld community website is to provide a platform for budding gardenening enthusiasts, hobbyists and professionals to share information. Harvester - Debug Monitor for Log4Net and NLog: Harvester enables you to monitor all Win32 debug output from all applications running on your machine. Watch real time Log4Net and NLog output across multiple applications at the same time. Trace a call from client to server and back without having to look at multiple log files.Hjelp! Jeg skal ha farmakokinetikk-eksamen!: Sliter du med å pugge formler til farmakokinetikk-eksamenen? Da er redningen din her! :DMercury Business Framework: Mercury Business Framework is a project set up to define basic objects used by the vast majority of business and non business software. The idea is to define the low level objects required by most applications on the web and desktop.MyDistrictBuilder: MyDistrictBuilder allows anybody to build legislative districts and submit to the Florida House of Rep. It is built on Bing Maps, Silverlight and AZURE. Written in C#. It is written to allow anyone to adapt for any states census geography. www.floridaredistricting.cloudapp.netMySchoolApp: MySchoolApp is a customizable application written in Visual Basic and C# for the Windows Mobile Phone 7 platform using Visual Studio Professional 2010. The application combines links to RSS and Web sites about a school, and displays a map and local weather. Osm Parser Community Edition: Osm Parser parse highways in open street maps to generate routable roads network in spatialite.PRBox Cloud Website: This is the website base for PRBox.com SEO Reporter : open source search engine optimization software: SEO Reporter is an open source search engine optimization application for detecting HTML related SEO violations, gathering data about a Web page and analyzing its keywords strategy. It's a Windows navigation application developed in F#. Setting timeout for SharePoint 2010 Silverlight web part: This web part overwrites 5sec hard-coded timeout for SharePoint 2010 Silverlight web part.SharePoint 2010 Central Administration Automatic Resources Link Generator: This feature will automatically generate the resources links list (Quick Links) in your SharePoint 2010 Central Administration site making it easier for SharePoint Admins to navigate through the common Central Administration activities without populating it themselves - VS2010/c#SharePoint Holiday Loader: SharePoint Holiday Loader allows you to quickly import public holidays into a SharePoint calendar from the standard .HOL format.Sohu?????: ?????????WPF?????????????，????????????（??、??、???），??、??、???????，????????????，??????????????。 ??V1????????，V2?????????????????。SP2010 Form Manipulator: This project will hopefully make it easier to manipulate the list form in SharePoint 2010.SPRotator: A jQuery powered web part for SharePoint that cycles through any type of list.SQL Script to Create a Website Directory: Here you can download sql script to create a website directory using SQL Server. * This is only the easy directory sql script to develop your website. Directory software may publish in future.Sri Hits Zone: This is an online repository which used to share Sri Lankan music. This is to provide Sri Lankans who living abroad to being touches with Sri Lankan artist and their music. testz: testzTime domain dissipative acoustic problem: tddapWindows Azure Hosted Services VM Manager: Windows Azure Hosted Services VM Manager is a Windows Service that can manage the number of hosted services running in Azure by either a time based schedule or by CPU load. This allows your service to scale for either dynamic load or a known schedule. Z80TR: Z80TR

  Read the article

• CodePlex Daily Summary for Saturday, January 01, 2011

  CodePlex Daily Summary for Saturday, January 01, 2011Popular ReleasesBloodSim: BloodSim - 1.3.0.0: - Added tally for number of boss swings and swing avoids - Removed a large number of options that were carried over from Beta and are no longer relevant - Changed stat entry to use Rating format for Dodge, Parry, Haste and Mastery - Rearranged Settings interface - BloodSim will now check for updates on startup and notify the user if a new version is available - Added option to Show/Hide the Simulation Log to increase speed during large simulationsEnhSim: EnhSim 2.2.8 ALPHA: 2.2.8 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Rebuilt Feral Spir...CBM-Command: Version 2.0 Beta 2 - 2010-12-31: This version fixes three major bugs in Version 2.0 Beta 1 Changes(64, 128, Plus/4) Changed the timing code back to version 1.7 because the clock() function in cc65 does not reflect accurate timing. (VIC, PET) The time(NULL) function is not available on these targets and thus had to be removed. Help Hot-Key Fixed - Now when you press either F1 or H you get the help file (if the CBM-Command disk is in the drive you started CBM-Command from). Updated Help File - the new help file by popmi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...eCompany: eCompany v0.2.0 Build 63: Version 0.2.0 Build 63: Added Splash screen & about box Added downloading of currencies when eCompany launched for the first time (must close any bug caused by no currency rate existing) Added corp creation when eCompany launched for the first time (for now, you didn't need to edit the company.xml file manually) You just need to decompress file "eCompany v0.2.0.63.zip" into your current eCompany install directory.SQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 8: 1. added truncate table/defrag index/check db functions 2. improved alert 3. fixed problem with alert causing config file corrupted(hopefully)Temporary Data Storage Folder: TDS Folder version 0.2 Beta: In this release following bugs are fixed: 'Send to' entry bug fixed Preferences bug fixedSilverlight File Upload and Download with Interlink: HSS Interlink v.2.1.300: Latest Release 2.1.300 - December 29th 2010 Change Log DownloadFileDialog Modified to support an absolute uri for the DownloadUri property, which is required for OOB support UploadFileDialog Modified to support an absolute uri for the UploadUri property, which is required for OOB support For existing users be sure to uninstall the older version prior to installing this version Note: The demo application is NOT included with the installer but can be reviewed here Stable release and ready...RDPAddins .NET: RDPAddins Alpha 2 (0.2.0.0): Second alpha release... Breaking changes (now this project has 0.2 version): now addin should implement RDPAddins.Common.IAddin and should me exported with RDPAddins.Common.AddinMetadataAtrribute !!!most of all old Addin base class method you can fide in IChannel or IUI interfeces see FileTransferAddin Now RDPAddins.Common.dll just provide interfaces for addin, channel, ui, and export metadata Whole implementation is in RDPAddins.exe RDPAddins.Common.dll has some documentation :) why all this...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)AutoLoL: AutoLoL v1.5.0: Added the all new Masteries Browser which replaces the Quick Open combobox AutoLoL will now attemt to create file associations for mastery (*.lolm) files Each Mastery Build can now contain keywords that the Masteries Browser will use for filtering Changed the way AutoLoL detects if another instance is already running Changed the format of the mastery files to allow more information stored in* Dialogs will now focus the Ok or Cancel button which allows the user to press Return to clo...Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!Facebook C# SDK: 4.1.1: From 4.1.1 Release: Authentication bug fix caused by facebook change (error with redirects in Safari) Authenticator fix, always returning true From 4.1.0 Release Lots of bug fixes Removed Dynamic Runtime Language dependencies from non-dynamic platforms. Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample Changed internal serialization to use Json.net BREAKING CHANGE: Canvas Session is no longer supported. Use Signed...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Euro for Windows XP: ChangeRegionalSettings 1..0: *Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFlickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).New Projects7-Up: PowerShell Scripts for Upgrading SharePoint 2007 to 2010: PowerShell scripts to automate the upgrade of SharePoint 2007 to SharePoint 2010 using a content database or hybrid upgrade approach.Apple Wireless Keyboard: Helper that Allows people use the Apple Wireless (or Wired possibly) Keyboard under Windows 7 without loosing the mac functionalityckTest: testtesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttestCrude - .Net Dependency Management: Crude is light dependency management for .net, there was no dependency management solution for .net as Maven or Ivy until now. DeepTime: Event tacking, management and plotting site.Dev/Test Cloud Platform: Dev/Test Cloud Platform is implemented by Beyondsoft and Microsoft. The platform is dedicated to software development and test scenarios. With Dev/Test Cloud you can save your cost, improve work efficiency, and improve product quality.Image Viewer (wpf version): Image viewer helps windows users to review images on their computer. It is written i Csharp and wpf.LNOne: All common code, framework code, utility code in one.LOGL::GLib: LOGL::GLib is an OpenGL game library written in C++ that allows new C++/OpenGL programmers to focus more on the game and less on the details.MAPI.GUI: Graphical program uses function from mcopyapi.codeplex.com and mdeleteapi.codeplex.com console programs. Program support longPath (above 259 chars and less 32000 chars)Movie Collection Manager: Gerenciador que ajuda a manusear coleção de filmes. Possui uma interface super atraente e simples de usar. Ferramentas e tecnologias usadas: - Visual C# 2010 Express - SQL Server 2008 R2 Express - Windows Forms - Entity Framework OBS: Projeto concorrente do Desafio .NETMyStudioServer.com: Source code for the DotNetNuke http://MyStudioServer.com websiteNusya Tester: A software to create and use various tests with right answers explanations to help one in self-education. It's developed in C#Project Zylaphon: Project Zylaphon is a C# GPL Open Source Computer Aided Music Composition System. Its design goals include highly interactive composition, music computation, and analysis; system control to be provided by an A.I. goal based agenda and quasi Blackboard for maximum flexibility.Remember The Task: RememberTheTask makes it easier to remember what you have been doing the last hour. It's developed in Visual Basic.Rent Payments Scheduling: Register rent schedules and keep track of them.Simple MVVM Toolkit for Silverlight: Simple MVVM Toolkit makes it easier to develop Silverlight applications using the Model-View-ViewModel design pattern.Sparrow.NET HtmlTemplate: Its a template engine for generating web pages.(?????HTML?????，??????html Tag???????html????。)SQLDiagUI: SQLDiagUI provides a GUI for Microsoft SQlDiag Utility which allows users to create a configuration file and start/stop/schedule SQLDiag against a SQL Server.Test Control: testing frameworkTwicko: Simple twitter client.Unity3D Utilities: Unity3D Utilities provides additional functionality to Unity3D (3.0+) via extensions, utilities, mini-frameworks, etc.VBA Composite Controls Object Model: VBA Composite Controls encapsulate complex event-driven interactions between ActiveX controls and other objects in Microsoft Office. It's uses are limited only by the imagination, from binding controls together for updating, to creating unique user interfaces!World of Warcraft Backit up(wow backit up): a project that helps you backup and restore your settings in wow easilyYamma: Yet Another Money Management Application. Build in .NET 4, SQLCE, LINQ and the Entity Framework.

  Read the article

• UITableView issue when using separate delegate/dataSource

  - by Adam Alexander

  General Description: To start with what works, I have a UITableView which has been placed onto an Xcode-generated view using Interface Builder. The view's File Owner is set to an Xcode-generated subclass of UIViewController. To this subclass I have added working implementations of numberOfSectionsInTableView: tableView:numberOfRowsInSection: and tableView:cellForRowAtIndexPath: and the Table View's dataSource and delegate are connected to this class via the File Owner in Interface Builder. The above configuration works with no problems. The issue occurs when I want to move this Table View's dataSource and delegate implementations out to a separate class, most likely because there are other controls on the View besides the Table View and I'd like to move the Table View-related code out to its own class. To accomplish this, I try the following: Create a new subclass of UITableViewController in Xcode Move the known-good implementations of numberOfSectionsInTableView: tableView:numberOfRowsInSection: and tableView:cellForRowAtIndexPath: to the new subclass Drag a Table View Controller to the top level of the existing XIB in InterfaceBuilder, delete the View/TableView that are automatically created for this Table View Controller, then set the Table View Controller's class to match the new subclass Remove the previously-working Table View's existing dataSource and delegate connections and connect them to the new Table View Controller When complete, I do not have a working Table View. I end up with one of three outcomes which can seemingly happen at random: When the Table View loads, I get a runtime error indicating I am sending tableView:cellForRowAtIndexPath: to an object which does not recognize it When the Table View loads, the project breaks into the debugger without error There is no error, but the Table View does not appear With some debugging and having created a basic project just to reproduce this issue, I am usually seeing the 3rd option above (no error but no visible table view). I added some NSLog calls and found that although numberOfSectionsInTableView and numberOfRowsInSection are both getting called, cellForRowAtIndexPath is not. I am convinced I'm missing something really simple and was hoping the answer may be obvious to someone with more experience than I have. If this doesn't turn out to be an easy answer I would be happy to update with some code or a sample project. Thanks for your time! Complete steps to reproduce: Create a new iPhone OS, View-Based Application in Xcode and call it TableTest Open TableTestViewController.xib in Interface Builder and drag a Table View onto the provided view surface. Connect the Table View's dataSource and delegate outlets to File's Owner, which should already represent the TableTestViewController class. Save your changes Back in Xcode, add the following code to TableTestViewController.m: - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView { NSLog(@"Returning num sections"); return 1; } - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { NSLog(@"Returning num rows"); return 1; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { NSLog(@"Trying to return cell"); static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease]; } cell.text = @"Hello"; NSLog(@"Returning cell"); return cell; } Build and Go, and you should see the word Hello appear in the TableView Now to attempt to move this TableView's logic out to a separate class, first create a new file in Xcode, choosing UITableViewController subclass and calling the class TableTestTableViewController Remove the above code snippet from TableTestViewController.m and place it into TableTestTableViewController.m, replacing the default implementation of these three methods with ours. Back in Interface Builder within the same TableTestViewController.xib file, drag a Table View Controller into the main IB window and delete the new Table View object that automatically came with it Set the class for this new Table View Controller to TableTestTableViewController Remove the dataSource and delegate bindings from the existing, previously-working Table View and reconnect the same two bindings to the new Table Test Table View Controller we created. Save changes, Build and Go, and if you're getting the results I'm getting, note the Table View no longer functions properly Solution: With some more troubleshooting and some assistance from the iPhone Developer Forums at https://devforums.apple.com/message/5453, I've documented a solution! The main UIViewController subclass of the project needs an outlet pointing to the UITableViewController instance. To accomplish this, simply add the following to the primary view's header (TableTestViewController.h): #import "TableTestTableViewController.h" and IBOutlet TableTestTableViewController *myTableViewController; Then, in Interface Builder, connect the new outlet from File's Owner to Table Test Table View Controller in the main IB window. No changes are necessary in the UI part of the XIB. Simply having this outlet in place, even though no user code directly uses it, resolves the problem completely. Thanks to those who've helped and credit goes to BaldEagle on the iPhone Developer Forums for finding the solution.

  Read the article

• Cold Start

  - by antony.reynolds

  Well we had snow drifts 3ft deep on Saturday so it must be spring time.  In preparation for Spring we decided to move the lawn tractor.  Of course after sitting in the garage all winter it refused to start.  I then come into the office and need to start my 11g SOA Suite installation.  I thought about this and decided my tractor might be cranky but at least I can script the startup of my SOA Suite 11g installation. So with this in mind I created 6 scripts.  I created them for Linux but they should translate to Windows without too many problems.  This is left as an exercise to the reader, note you will have to hardcode more than I did in the Linux scripts and create separate script files for the sqlplus and WLST sections. Order to start things I believe there should be order in all things, especially starting the SOA Suite.  So here is my preferred order. Start Database This is need by EM and the rest of SOA Suite so best to start it before the Admin Server and managed servers. Start Node Manager on all machines This is needed if you want the scripts to work across machines. Start Admin Server Once this is done in theory you can manually stat the managed servers using WebLogic console.  But then you have to wait for console to be available.  Scripting it all is quicker and easier way of starting. Start Managed Servers & Clusters Best to start them one per physical machine at a time to avoid undue load on the machines.  Non-clustered install will have just soa_server1 and bam_serv1 by default.  Clusters will have at least SOA and BAM clusters that can be started as a group or individually.  I have provided scripts for standalone servers, but easy to change them to work with clusters. Starting Database I have provided a very primitive script (available here) to start the database, the listener and the DB console.  The section highlighted in red needs to match your database name. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "#####################" echo "# Starting Database #" echo "#####################" sqlplus / as sysdba <<-EOF startup exit EOF echo "#####################" echo "# Starting Listener #" echo "#####################" lsnrctl start echo "######################" echo "# Starting dbConsole #" echo "######################" emctl start dbconsole read -p "Hit <enter> to continue" Starting SOA Suite My script for starting the SOA Suite (available here) breaks the task down into five sections. Setting the Environment First set up the environment variables.  The variables highlighted in red probably need changing for your environment. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME Starting the Node Manager I start node manager with a nohup to stop it exiting when the script terminates and I redirect the standard output and standard error to a file in a logs directory. cd $DOMAIN_HOME echo "#########################" echo "# Starting Node Manager #" echo "#########################" nohup $WL_HOME/server/bin/startNodeManager.sh >logs/NodeManager.out 2>&1 & Starting the Admin Server I had problems starting the Admin Server from Node Manager so I decided to start it using the command line script.  I again use nohup and redirect output. echo "#########################" echo "# Starting Admin Server #" echo "#########################" nohup ./startWebLogic.sh >logs/AdminServer.out 2>&1 & Starting the Managed Servers I then used WLST (WebLogic Scripting Tool) to start the managed servers.  First I waited for the Admin Server to come up by putting a connect command in a loop.  I could have put the WLST commands into a separate script file but I wanted to reduce the number of files I was using and so used redirected input (here syntax). $ORACLE_HOME/common/bin/wlst.sh <<-EOF import time sleep=time.sleep print "#####################################" print "# Waiting for Admin Server to Start #" print "#####################################" while True:   try:     connect(adminServerName="AdminServer")     break   except:     sleep(10) I then start the SOA server and tell WLST to wait until it is started before returning.  If starting a cluster then the start command would be modified accordingly to start the SOA cluster. print "#######################" print "# Starting SOA Server #" print "#######################" start(name="soa_server1", block="true") I then start the BAM server in the same way as the SOA server. print "#######################" print "# Starting BAM Server #" print "#######################" start(name="bam_server1", block="true") EOF Finally I let people know the servers are up and wait for input in case I am running in a separate window, in which case the result would be lost without the read command. echo "#####################" echo "# SOA Suite Started #" echo "#####################" read -p "Hit <enter> to continue" Stopping the SOA Suite My script for shutting down the SOA Suite (available here)  is basically the reverse of my startup script.  After setting the environment I connect to the Admin Server using WLST and shut down the managed servers and the admin server.  Again the script would need modifying for a cluster. Stopping the Servers If I cannot connect to the Admin Server I try to connect to the node manager, in case the Admin Server is down but the managed servers are up. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME cd $DOMAIN_HOME $MW_HOME/Oracle_SOA/common/bin/wlst.sh <<-EOF try:   print("#############################")   print("# Connecting to AdminServer #")   print("#############################")   connect(username='weblogic',password='welcome1',url='t3://localhost:7001') except:   print "#########################################"   print "#   Unable to connect to Admin Server   #"   print "# Attempting to connect to Node Manager #"   print "#########################################"   nmConnect(domainName=os.getenv("DOMAIN_NAME")) print "#######################" print "# Stopping BAM Server #" print "#######################" shutdown('bam_server1') print "#######################" print "# Stopping SOA Server #" print "#######################" shutdown('soa_server1') print "#########################" print "# Stopping Admin Server #" print "#########################" shutdown('AdminServer') disconnect() nmDisconnect() EOF Stopping the Node Manager I stopped the node manager by searching for the java node manager process using the ps command and then killing that process. echo "#########################" echo "# Stopping Node Manager #" echo "#########################" kill -9 `ps -ef | grep java | grep NodeManager |  awk '{print $2;}'` echo "#####################" echo "# SOA Suite Stopped #" echo "#####################" read -p "Hit <enter> to continue" Stopping the Database Again my script for shutting down the database is the reverse of my start script.  It is available here.  The only change needed might be to the database name. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "######################" echo "# Stopping dbConsole #" echo "######################" emctl stop dbconsole echo "#####################" echo "# Stopping Listener #" echo "#####################" lsnrctl stop echo "#####################" echo "# Stopping Database #" echo "#####################" sqlplus / as sysdba <<-EOF shutdown immediate exit EOF read -p "Hit <enter> to continue" Cleaning Up Cleaning SOA Suite I often run tests and want to clean up all the log files.  The following script (available here) does this for the WebLogic servers in a given domain on a machine.  After setting the domain I just remove all files under the servers logs directories.  It also cleans up the log files I created with my startup scripts.  These scripts could be enhanced to copy off the log files if you needed them but in my test environments I don’t need them and would prefer to reclaim the disk space. #!/bin/sh echo "###########################" echo "# Setting SOA Environment #" echo "###########################" export MW_HOME=~oracle/Middleware11gPS1 export WL_HOME=$MW_HOME/wlserver_10.3 export ORACLE_HOME=$MW_HOME/Oracle_SOA export DOMAIN_NAME=soa_std_domain export DOMAIN_HOME=$MW_HOME/user_projects/domains/$DOMAIN_NAME echo "##########################" echo "# Cleaning SOA Log Files #" echo "##########################" cd $DOMAIN_HOME rm -Rf logs/* servers/*/logs/* read -p "Hit <enter> to continue" Cleaning Database I also created a script to clean up the dump files of an Oracle database instance and also the EM log files (available here).  This relies on the machine name being correct as the EM log files are stored in a directory that is based on the hostname and the Oracle SID. #!/bin/sh echo "##############################" echo "# Setting Oracle Environment #" echo "##############################" . oraenv <<-EOF orcl EOF echo "#############################" echo "# Cleaning Oracle Log Files #" echo "#############################" rm -Rf $ORACLE_BASE/admin/$ORACLE_SID/*dump/* rm -Rf $ORACLE_HOME/`hostname`_$ORACLE_SID/sysman/log/* read -p "Hit <enter> to continue" Summary Hope you find the above scripts useful.  They certainly stop me hanging around waiting for things to happen on my test machine and make it easy to run a test, change parameters, bounce the SOA Suite and clean the logs between runs so I can see exactly what is happening. Now I need to get that mower started…

  Read the article

• CodePlex Daily Summary for Monday, March 05, 2012

  CodePlex Daily Summary for Monday, March 05, 2012Popular ReleasesSimple Injector: Simple Injector v1.4.1: This release adds two small improvements to the SimpleInjector.Extensions.dll. No changes have been made to the core library. New features and improvements in this release for the SimpleInjector.Extensions.dll The RegisterManyForOpenGeneric extension methods now accept non-generic decorator, as long as they implement the given open generic service type. GetTypesToRegister methods added to the OpenGenericBatchRegistrationExtensions class which allows to customize the behavior. Note that the...SQL Scriptz Runner: Application: Scriptz Runner source code and applicationCommonLibrary: Code: CodePowerGUI Visual Studio Extension: PowerGUI VSX 1.5.2: Added support for PowerGUI 3.2.Path Copy Copy: 10.0: New version with the following biggest new features: Regular expression support in custom commands (see this work item) Import/export feature for custom commands (see this work item) This version also addresses the following work items: 11353 11348 This version is a recommended upgrade for all users. Note: new custom commands that user regular expressions won't be compatible with earlier versions (if installed by registry manipulation or via network installation), but everything else is ...VidCoder: 1.3.1: Updated HandBrake core to 0.9.6 release (svn 4472). Removed erroneous "None" container choice. Change some logic and help text to stop assuming you have to pick the VIDEO_TS folder for a DVD scan. This should make previewing DVD titles on the Queue Multiple Titles window possible when you've picked the root DVD directory.ASP.NET MVC Framework - Abstracting Data Annotations, HTML5, Knockout JS techs: Version 1.0: Please download the source code. I am not associating any dll for release.ExtAspNet: ExtAspNet v3.1.0: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???，????? AJAX ??????????。 ExtAspNet ??????? JavaScript，?? CSS，?? UpdatePanel，?? ViewState，?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????：Apache License 2.0 (Apache) ??：http://extasp.net/ ??：http://bbs.extasp.net/ ??：http://extaspnet.codeplex.com/ ??：http://sanshi.cnblogs.com/ ????： +2012-03-04 v3.1.0 -??Hidden???????（〓?〓）。 -?PageManager??...AcDown????? - Anime&Comic Downloader: AcDown????? v3.9.1: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...Windows Phone Commands for VS2010: Version 1.0: Initial Release Version 1.0 Connect from device or emulator (Monitors the connection) Show Device information (Plataform, build , version, avaliable memory, total memory, architeture Manager installed applications (Launch, uninstall and explorer isolate storage files) Manager core applications (Launch blocked applications from emulator (Office, Calculator, alarm, calendar , etc) Manager blocked settings from emulator (Airplane Mode, Celullar Network, Wifi, etc) Deploy and update ap...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.01.00: Changes on Version 06.01.00 Fixed issue on GraySmallTitle container, that breaks the layout Fixed issue on Blue Metro7 Skin where the Search, Login, Register, Date is missing Fixed issue with the Version numbers on the target file Fixed issue where the jQuery and jQuery-UI files not deleted on upgrade from Version 01.00.00 Added a internal page where the Image Slider would be replaces with a BannerPaneMedia Companion: MC 3.433b Release: General More GUI tweaks (mostly imperceptible!) Updates for mc_com.exe TV The 'Watched' button has been re-instigated Added TV Menu sub-option to search ALL for new Episodes (includes locked shows) Movies Added 'Source' field (eg DVD, Bluray, HDTV), customisable in Advanced Preferences (try it out, let us know how it works!) Added HTML <<format>> tag with optional parameters for video container, source, and resolution (updated HTML tags to be added to Documentation shortly) Known Issu...Picturethrill: Version 2.3.2.0: Release includes Self-Update feature for Picturethrill. What that means for users is that they are always guaranteed to have a fresh copy of Picturethrill on their computers with all latest fixes. When Picturethrill adds a new website to get pictures from, you will get it too!Simple MVVM Toolkit for Silverlight, WPF and Windows Phone: Simple MVVM Toolkit v3.0.0.0: Added support for Silverlight 5.0 and Windows Phone 7.1. Upgraded project templates and samples. Upgraded installer. There are some new prerequisites required for this version, namely Silverlight 5 Tools, Expression Blend Preview for Silverlight 5 (until the SDK is released), Windows Phone 7.1 SDK. Because it is in the experimental band, I have also removed the dependency on the Silverlight Testing Framework. You can use it if you wish, but the Ria Services project template no longer uses ...CODE Framework: 4.0.20301: The latest version adds a number of new features to the WPF system (such as stylable and testable messagebox support) as well as various new features throughout the system (especially in the Utilities namespace).MyRouter (Virtual WiFi Router): MyRouter 1.0.2 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Orchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesNetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...New ProjectsAbsolute Risk Game: Risk Game is a classic "World Domination Risk" game where you try to conquer the world.Architecture Document Catalog: The Architecture Document Catalog is a catalog for various documentation used by software solution architects. The initial architecture framework supported is from Rozanski and Woods, also called Viewpoints and Perspectives. It's in C#, Silverlight, WCF RIA Services.Background Worker Job Execution & Job Scheduler: Background worker is a multi-threaded job execution and scheduling engine. Very similar to Quartz, but with a slightly different focus.BWOS: preparing a new operating system. and name BWOS. CommonLibrary: Common modules and componentesCustomizeTool: CustomizeToolData Foundry: Data Foundry is a Swiss army knife for database administrator. With capabilities to cross reference check data between tables to find orphaned data and table relations.Data Grid Extensions: Modular extensions for the DataGrid control. Attach filtering capabilities to your existing DataGrid.dk.Helper: dk.Helper makes it easier for tribal wars game players (divoke-kmene.sk) to manage common activities in game. It's developed in C#.ExEn: ExEn is a high-performance implementation of a subset of the XNA API that runs on Silverlight, iOS and Android.Extended Methods for .NET: Developed in VB.NET, this DLL includes some functions I came across over the internet. Originally they were functions. I made some changes to suit my work and recreated them as Extended methods. Currently includes two extended methods for the Image class and one extended method for the String class. I will update it with new methods as I go along.GestionarComenzi: Gestioneaza Comenzi - Firma transporturiGIS Library Management: GIS Library Management System.iFinity Cache Master for DotNetNuke: The iFinity DotNetNuke Cache Master is an Administration module for DotNetNuke. This module allows administrators to inspect the current contents of the ASP.NET Cache in their running DotNetNuke installation. A very useful tool for developers working with the DotNetNuke cache.intelliEssay Document Format Checker: This is a product that tries to check a document's format to see if it conforms to certain given standard.Just T[he]IP: "Just The IP" leverages the Bing API v2 and the ip: Bing Advanced Operator to list the other web sites hosted at this IP Address (that are indexed by Bing).KTool: Ktool is a tool for learning japanese kanji. This program is still in developed. Current version can only display and find a kanji word (Press ctrl-F on main screen for search). Developed in WPF, .NET 4.0Lab Checker: Lab Checker makes it easy for teacher to check students' programs. It allows a student to test his program on a set of test cases which eliminates the need to run the program manually.MeoBox Vera Control Plugin: This is my project for creating a plugin to control my MeoBox ( Scientific Atlanta ) using Vera ( www.micasaverde.com ) Should work with other TV2Client boxesNUnitTestHelper: NUnitTestHelper is a helper class for developing unit tests for C# applications with NUnit framework. This helper library provides set of classes and method which can be used for accomplishing faster unit test development for any kind of project. NUnitTestBase – Supports basic functionality for writing a unit test with NUnit framework. This base class provides built in support for mocking framework. This version provides support for Rhino mocking framework.OnlineExam: Common online examination system based on Asp.net MVC3 can used for knowledge test, I/Q test, college test or most other test project.Orchard Code Generation Extensions: Code Generation Extensions module for Orchard.OrchardTranstion_CN: Orchar?? OsAvatar: to next step showOwnTools: About my toolsPhone Finder App: PhoneFinder will be a Windows Phone platform app alternative for finding a lost or stolen phone. Our plan is to have additional functionality the Windows software does not include. It will be developed using ASP.NET MVC, SQL Server, C#, etc.PoshChat: PoshChat is a client/server chat program written in PowerShell. Supports multiple client connections to a single server to chat.Process Attachment And Secure Text: ProcessAttachmentAndSecureText is an Exchange Transport Agent DLL and associated ASPX page. It is used to 1) strip out attachments and send them to an upload portal, and 2) to strip out text from emails and send it to an upload portal. It is currently coded for Exchange 2010Resource Viewer - Visual Studio Extension: Simply put the “resource viewer extension” enables you to visually view your ResourceDictionary. To open it go to: View – Other Windows – Resource Viewer. When working with WPF/Silverlight you put your reusable resources in a common ResourceDictionary, those resources might be of type Style, SolidColorBrush, DrawingBrush, BitmapImage and more. The problems starts when you have that ResourceDictionary you have no way to see how your resources look like, making the work process (of both t...Scumm XNA: Scumm XNA is an engine that runs old school LucasArts graphical adventure games. It is written completely in C# and will run on PC, Xbox 360 and Windows phone. The code is inspired by ScummVM but this project is not a port, it is a complete rewrite in order to optimize the engine for the CLR. Of course, you will need to own the orinigal games in order to use it. Currently, I will focus my work on the great "Day of Tentacle" game specifically the CD version.SDX DataGrid: SDXDataGrid is a comprehensive data grid component for Microsoft .NET 3.5 web application developers. It is designed to ease the exhausting process of implementing the necessary code for sorting, navigation, grouping, searching and data editing in a data representation object.SQL Scriptz Runner: Features are : Drag And Drop script files Run a directory of script files Sql Script out put messages during execution Script passed or failed that are colored green and red (yellow for running) Stop on error option Open script on error option Run report with time taken for each uComponents Demo: A demo for the code of running uComponents in Umbraco siteUnixTable: UnixTable makes it easier to realize application to access database, with no code but only with visual instrument at runtime. You'll no longer have to write query or code to read table from database. It's developed in Visual Basic for .NET 4. VOA Player.NET: VOA Player is a lightweight windows client for listening VOA Special English. Because of GFW blocking it fetch RSS data via rss2proxy.appspot.com indirectly. User can view article page and listen MP3 stream. The project is a C# implementation of voaplayer.sinaapp.com.Windows Metafile Library: The library supports reading and writing WMF files. Source code is written in pure .NET from scratch following the Windows Metafile Format Specification.Windows Phone 7.1 + MicroFramework (a phone device as remote control): Windows Phone 7.1 + .Net MicroFramework (How use a windows phone device as remote control of a Fez Panda II/MicroFramework board). A windows phone device can be connected to a wifi network (for example a wifi router). If you have also a MicroFramework board connected to the wifi network; you can send some http rest commands from the windows phone device to the MicroFramework board. The microframework board, it must support the tcp/ip protocol through a connect shield. In this exaple it will...XBMC Cache Manager: A Windows Service to manage a shared XBMC MySQL database and shared cache folder.

  Read the article

• Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

  - by Tarun Arora

  Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples.         After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped.         Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run.   Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test.   Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through.  As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete.      Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’.    Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap   Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You!   Share this post : CodeProject

  Read the article

• Building The Right SharePoint Team For Your Organization

  - by Mark Rackley

  I see the question posted fairly often asking what kind SharePoint team an organization should have. How many people do I need? What roles do I need to fill? What is best for my organization? Well, just like every other answer in SharePoint, the correct answer is “it depends”. Do you ever get sick of hearing that??? I know I do… So, let me give you my thoughts and opinions based upon my experience and what I’ve seen and let you come to your own conclusions. What are the possible SharePoint roles? I guess the first thing you need to understand are the different roles that exist in SharePoint (and their are LOTS). Remember, SharePoint is a massive beast and you will NOT find one person who can do it all. If you are hoping to find that person you will be sorely disappointed. For the most part this is true in SharePoint 2007 and 2010. However, generally things are improved in 2010 and easier for junior individuals to grasp. SharePoint Administrator The absolutely positively only role that you should not be without no matter the size of your organization or SharePoint deployment is a SharePoint administrator. These guys are essential to keeping things running and figuring out what’s wrong when things aren’t running well. These unsung heroes do more before 10 am than I do all day. The bad thing is, when these guys are awesome, you don’t even know they exist because everything is running so smoothly. You should definitely invest some time and money here to make sure you have some competent if not rockstar help. You need an admin who truly loves SharePoint and will go that extra mile when necessary. Let me give you a real world example of what I’m talking about: We have a rockstar admin… and I’m sure she’s sick of my throwing her name around so she’ll just have to live with remaining anonymous in this post… sorry Lori… Anyway! A couple of weeks ago our Server teams came to us and said Hi Lori, I’m finalizing the MOSS servers and doing updates that require a restart; can I restart them? Seems like a harmless request from your server team does it not? Sure, go ahead and apply the patches and reboot during our scheduled maintenance window. No problem? right? Sounded fair to me… but no…. not to our fearless SharePoint admin… I need a complete list of patches that will be applied. There is an update that is out there that will break SharePoint… KB973917 is the patch that has been shown to cause issues. What? You mean Microsoft released a patch that would actually adversely affect SharePoint? If we did NOT have a rockstar admin, our server team would have applied these patches and then when some problem occurred in SharePoint we’d have to go through the fun task of tracking down exactly what caused the issue and resolve it. How much time would that have taken? If you have a junior SharePoint admin or an admin who’s not out there staying on top of what’s going on you could have spent days tracking down something so simple as applying a patch you should not have applied. I will even go as far to say the only SharePoint rockstar you NEED in your organization is a SharePoint admin. You can always outsource really complicated development projects or bring in a rockstar contractor every now and then to make sure you aren’t way off track in other areas. For your day-to-day sanity and to keep SharePoint running smoothly, you need an awesome Admin. Some rockstars in this category are: Ben Curry, Mike Watson, Joel Oleson, Todd Klindt, Shane Young, John Ferringer, Sean McDonough, and of course Lori Gowin. SharePoint Developer Another essential role for your SharePoint deployment is a SharePoint developer. Things do start to get a little hazy here and there are many flavors of “developers”. Are you writing custom code? using SharePoint Designer? What about SharePoint Branding?  Are all of these considered developers? I would say yes. Are they interchangeable? I’d say no. Development in SharePoint is such a large beast in itself. I would say that it’s not so large that you can’t know it all well, but it is so large that there are many people who specialize in one particular category. If you are lucky enough to have someone on staff who knows it all well, you better make sure they are well taken care of because those guys are ready-made to move over to a consulting role and charge you 3 times what you are probably paying them. :) Some of the all-around rockstars are Eric Shupps, Andrew Connell (go Razorbacks), Rob Foster, Paul Schaeflein, and Todd Bleeker SharePoint Power User/No-Code Solutions Developer These SharePoint Swiss Army Knives are essential for quick wins in your organization. These people can twist the out-of-the-box functionality to make it do things you would not even imagine. Give these guys SharePoint Designer, jQuery, InfoPath, and a little time and they will create views, dashboards, and KPI’s that will blow your mind away and give your execs the “wow” they are looking for. Not only can they deliver that wow factor, but they can mashup, merge, and really help make your SharePoint application usable and deliver an overall better user experience. Before you hand off a project to your SharePoint Custom Code developer, let one of these rockstars look at it and show you what they can do (in probably less time). I would say the second most important role you can fill in your organization is one of these guys. Rockstars in this category are Christina Wheeler, Laura Rogers, Jennifer Mason, and Mark Miller SharePoint Developer – Custom Code If you want to really integrate SharePoint into your legacy systems, or really twist it and make it bend to your will, you are going to have to open up Visual Studio and write some custom code.  Remember, SharePoint is essentially just a big, huge, ginormous .NET application, so you CAN write code to make it do ANYTHING, but do you really want to spend the time and effort to do so? At some point with every other form of SharePoint development you are going to run into SOME limitation (SPD Workflows is the big one that comes to mind). If you truly want to knock down all the walls then custom development is the way to go. PLEASE keep in mind when you are looking for a custom code developer that a .NET developer does NOT equal a SharePoint developer. Just SOME of the things these guys write are: Custom Workflows Custom Web Parts Web Service functionality Import data from legacy systems Export data to legacy systems Custom Actions Event Receivers Service Applications (2010) These guys are also the ones generally responsible for packaging everything up into solution packages (you are doing that, right?). Rockstars in this category are Phil Wicklund, Christina Wheeler, Geoff Varosky, and Brian Jackett. SharePoint Branding “But it LOOKS like SharePoint!” Somebody call the WAAAAAAAAAAAAHMbulance…   Themes, Master Pages, Page Layouts, Zones, and over 2000 styles in CSS.. these guys not only have to be comfortable with all of SharePoint’s quirks and pain points when branding, but they have to know it TWICE for publishing and non-publishing sites.  Not only that, but these guys really need to have an eye for graphic design and be able to translate the ramblings of business into something visually stunning. They also have to be comfortable with XSLT, XML, and be able to hand off what they do to your custom developers for them to package as solutions (which you are doing, right?). These rockstars include Heater Waterman, Cathy Dew, and Marcy Kellar SharePoint Architect SharePoint Architects are generally SharePoint Admins or Developers who have moved into more of a BA role? Is that fair to say? These guys really have a grasp and understanding for what SharePoint IS and what it can do. These guys help you structure your farms to meet your needs and help you design your applications the correct way. It’s always a good idea to bring in a rockstar SharePoint Architect to do a sanity check and make sure you aren’t doing anything stupid.  Most organizations probably do not have a rockstar architect on staff. These guys are generally brought in at the deployment of a farm, upgrade of a farm, or for large development projects. I personally also find architects very useful for sitting down with the business to translate their needs into what SharePoint can do. A good architect will be able to pick out what can be done out-of-the-box and what has to be custom built and hand those requirements to the development Staff. Architects can generally fill in as an admin or a developer when needed. Some rockstar architects are Rick Taylor, Dan Usher, Bill English, Spence Harbar, Neil Hodgkins, Eric Harlan, and Bjørn Furuknap. Other Roles / Specialties On top of all these other roles you also get these people who specialize in things like Reporting, BDC (BCS in 2010), Search, Performance, Security, Project Management, etc... etc... etc... Again, most organizations will not have one of these gurus on staff, they’ll just pay out the nose for them when they need them. :) SharePoint End User Everyone else in your organization that touches SharePoint falls into this category. What they actually DO in SharePoint is determined by your governance and what permissions you give these guys. Hopefully you have these guys on a fairly short leash and are NOT giving them access to tools like SharePoint Designer. Sadly end users are the ones who truly make your deployment a success by using it, but are also your biggest enemy in breaking it.  :)  We love you guys… really!!! Okay, all that’s fine and dandy, but what should MY SharePoint team look like? It depends! Okay… Are you just doing out of the box team sites with no custom development? Then you are probably fine with a great Admin team and a great No-Code Solution Development team. How many people do you need? Depends on how busy you can keep them. Sorry, can’t answer the question about numbers without knowing your specific needs. I can just tell you who you MIGHT need and what they will do for you. I’ll leave you with what my ideal SharePoint Team would look like for a particular scenario: Farm / Organization Structure Dev, QA, and 2 Production Farms. 5000 – 10000 Users Custom Development and Integration with legacy systems Team Sites, My Sites, Intranet, Document libraries and overall company collaboration Team Rockstar SharePoint Administrator 2-3 junior SharePoint Administrators SharePoint Architect / Lead Developer 2 Power User / No-Code Solution Developers 2-3 Custom Code developers Branding expert With a team of that size and skill set, they should be able to keep a substantial SharePoint deployment running smoothly and meet your business needs. This does NOT mean that you would not need to bring in contract help from time to time when you need an uber specialist in one area. Also, this team assumes there will be ongoing development for the life of your SharePoint farm. If you are just going to be doing sporadic custom development, it might make sense to partner with an awesome firm that specializes in that sort of work (I can give you the name of a couple if you are interested).  Again though, the size of your team depends on the number of requests you are receiving and how much active deployment you are doing. So, don’t bring in a team that looks like this and then yell at me because they are sitting around with nothing to do or are so overwhelmed that nothing is getting done. I do URGE you to take the proper time to asses your needs and determine what team is BEST for your organization. Also, PLEASE PLEASE PLEASE do not skimp on the talent. When it comes to SharePoint you really do get what you pay for when it comes to employees, contractors, and software.  SharePoint can become absolutely critical to your business and because you skimped on hiring a developer he created a web part that brings down the farm because he doesn’t know what he’s doing, or you hire an admin who thinks it’s fine to stick everything in the same Content Database and then can’t figure out why people are complaining. SharePoint can be an enormous blessing to an organization or it’s biggest curse. Spend the time and money to do it right, or be prepared to spending even more time and money later to fix it.

  Read the article

• ASP.NET MVC & Silverlight development - on Ubuntu

  - by queen3

  I recently moved my working environment from Windows 7 to Ubuntu, and enjoy this every minute of my working day. My work is currently to develop ASP.NET MVC and Silverlight applications. Thus, important Windows stuff is being still run in VirtualBox (such as IIS, MSSQL, Silverlight 3, and legacy COM stuff). For now, I use Visual Studio under VirtualBox as editor/IDE/debugger. But since I prefer Ubuntu fonts and UI much more I'd like to move at least editor (and better IDE) to native Ubuntu. Things I have already done: I store project files in my home folder and run Visual Studio from \vboxsvr share. With few tricks for ASP.NET it works. I use svn on Ubuntu. I test my ASP.NET MVC site using FireFox/FireBug on Ubuntu. What I need on Ubuntu: SQL client to manage MSSQL. I mostly need querying, but I would miss SQL intellisense support. I enjoy command-line svn a lot, but there're times when it's not enough (e.g. view files / check diffs / selectively commit at the sames time) so I wonder if there're any addons - I don't mean replacement for svn, just addons for rare cases like above. I wonder if there're editors that can provide some C# intellisense. Yes I know about MonoDevelop, but will it provide intellisense without compiling (since I'm going to compile remotely in Win box)? And pretty big topic, what's the best way (editor/IDE) to do "folder-based" development? What I mean: The project is /trunk. Everything is there. I don't want to manually add files to project or like that. The project is the folder and files down there. Main task is to edit files of course. I need a quick way to open / search for files in the project. Like in Resharper, I can click Ctrl-Shift-T (IIRC) and just type file name, a list of matching files in the project folder and below is shown. For example, gedit has file tree browser, but I can't quickly type XYZ to find all XYZ files there; moreover it doesn't automatically switch focus to/from editor; so it's more mouse-oriented; I need 100% keyboard way. I need syntax highlighting for C#/HTML/JS. Most importantly, I need HTML tags autocompletion. I can live without it, but I'll be sorry. I need to run compilation remotely (via ssh I think, invoking NAnt script which does MSBuild) and grab results such as errors and warnings, and I'd prefer to quickly go to error line/file. In short, I need to edit/search/open/svn/compile/run files in some folder. Looks like a case for command-line, but imaging I'm in /trunk and want to open file.cs inside /trunk/foo/bar/boo/far, I wouldn't want to type all this path even with bash autocompletion help. I'd prefer to enter :open file.cs, and maybe then select from list of file.cs and file1.cs. Well, maybe I'll add more soon. Actually, I don't have exact requirements; for example, I don't even know if I need to ask for IDE or editor; or should it have svn support integrated or I need to use it from console; do people work with files from console (search/commit/delete/etc) and open editor from there, or they work from editor/IDE and manage files (search/commit/delete) from there? What's better? I have a feeling that vim might have everything I need. I'd like to confirm that, before I spend a lot of time learning it. No I don't want Emacs. Any other IDE? I like Eclipse, but is it good for such stuff? And after all, do you feel like it's a good way to go? I enjoy Ubuntu, enjoy learning new stuff, and Ubuntu + Windows in VirtualBox actually runs faster than Windows7 on my mahcine, but maybe I need to keep development (editor/files management/etc) in Windows/VirtualBox only, leaving other stuff for Ubuntu?

  Read the article

• Using VLOOKUP in Excel

  - by Mark Virtue

  VLOOKUP is one of Excel’s most useful functions, and it’s also one of the least understood.  In this article, we demystify VLOOKUP by way of a real-life example.  We’ll create a usable Invoice Template for a fictitious company. So what is VLOOKUP?  Well, of course it’s an Excel function.  This article will assume that the reader already has a passing understanding of Excel functions, and can use basic functions such as SUM, AVERAGE, and TODAY.  In its most common usage, VLOOKUP is a database function, meaning that it works with database tables – or more simply, lists of things in an Excel worksheet.  What sort of things?   Well, any sort of thing.  You may have a worksheet that contains a list of employees, or products, or customers, or CDs in your CD collection, or stars in the night sky.  It doesn’t really matter. Here’s an example of a list, or database.  In this case it’s a list of products that our fictitious company sells: Usually lists like this have some sort of unique identifier for each item in the list.  In this case, the unique identifier is in the “Item Code” column.  Note:  For the VLOOKUP function to work with a database/list, that list must have a column containing the unique identifier (or “key”, or “ID”), and that column must be the first column in the table.  Our sample database above satisfies this criterion. The hardest part of using VLOOKUP is understanding exactly what it’s for.  So let’s see if we can get that clear first: VLOOKUP retrieves information from a database/list based on a supplied instance of the unique identifier. Put another way, if you put the VLOOKUP function into a cell and pass it one of the unique identifiers from your database, it will return you one of the pieces of information associated with that unique identifier.  In the example above, you would pass VLOOKUP an item code, and it would return to you either the corresponding item’s description, its price, or its availability (its “In stock” quantity).  Which of these pieces of information will it pass you back?  Well, you get to decide this when you’re creating the formula. If all you need is one piece of information from the database, it would be a lot of trouble to go to to construct a formula with a VLOOKUP function in it.  Typically you would use this sort of functionality in a reusable spreadsheet, such as a template.  Each time someone enters a valid item code, the system would retrieve all the necessary information about the corresponding item. Let’s create an example of this:  An Invoice Template that we can reuse over and over in our fictitious company. First we start Excel… …and we create ourselves a blank invoice: This is how it’s going to work:  The person using the invoice template will fill in a series of item codes in column “A”, and the system will retrieve each item’s description and price, which will be used to calculate the line total for each item (assuming we enter a valid quantity). For the purposes of keeping this example simple, we will locate the product database on a separate sheet in the same workbook: In reality, it’s more likely that the product database would be located in a separate workbook.  It makes little difference to the VLOOKUP function, which doesn’t really care if the database is located on the same sheet, a different sheet, or a completely different workbook. In order to test the VLOOKUP formula we’re about to write, we first enter a valid item code into cell A11: Next, we move the active cell to the cell in which we want information retrieved from the database by VLOOKUP to be stored.  Interestingly, this is the step that most people get wrong.  To explain further:  We are about to create a VLOOKUP formula that will retrieve the description that corresponds to the item code in cell A11.  Where do we want this description put when we get it?  In cell B11, of course.  So that’s where we write the VLOOKUP formula – in cell B11. Select cell B11: We need to locate the list of all available functions that Excel has to offer, so that we can choose VLOOKUP and get some assistance in completing the formula.  This is found by first clicking the Formulas tab, and then clicking Insert Function:   A box appears that allows us to select any of the functions available in Excel.  To find the one we’re looking for, we could type a search term like “lookup” (because the function we’re interested in is a lookup function).  The system would return us a list of all lookup-related functions in Excel.  VLOOKUP is the second one in the list.  Select it an click OK… The Function Arguments box appears, prompting us for all the arguments (or parameters) needed in order to complete the VLOOKUP function.  You can think of this box as the function is asking us the following questions: What unique identifier are you looking up in the database? Where is the database? Which piece of information from the database, associated with the unique identifier, do you wish to have retrieved for you? The first three arguments are shown in bold, indicating that they are mandatory arguments (the VLOOKUP function is incomplete without them and will not return a valid value).  The fourth argument is not bold, meaning that it’s optional:   We will complete the arguments in order, top to bottom. The first argument we need to complete is the Lookup_value argument.  The function needs us to tell it where to find the unique identifier (the item code in this case) that it should be retuning the description of.  We must select the item code we entered earlier (in A11). Click on the selector icon to the right of the first argument: Then click once on the cell containing the item code (A11), and press Enter: The value of “A11” is inserted into the first argument. Now we need to enter a value for the Table_array argument.  In other words, we need to tell VLOOKUP where to find the database/list.  Click on the selector icon next to the second argument: Now locate the database/list and select the entire list – not including the header line.  The database is located on a separate worksheet, so we first click on that worksheet tab: Next we select the entire database, not including the header line: …and press Enter.  The range of cells that represents the database (in this case “’Product Database’!A2:D7”) is entered automatically for us into the second argument. Now we need to enter the third argument, Col_index_num.  We use this argument to specify to VLOOKUP which piece of information from the database, associate with our item code in A11, we wish to have returned to us.  In this particular example, we wish to have the item’s description returned to us.  If you look on the database worksheet, you’ll notice that the “Description” column is the second column in the database.  This means that we must enter a value of “2” into the Col_index_num box: It is important to note that that we are not entering a “2” here because the “Description” column is in the B column on that worksheet.  If the database happened to start in column K of the worksheet, we would still enter a “2” in this field. Finally, we need to decide whether to enter a value into the final VLOOKUP argument, Range_lookup.  This argument requires either a true or false value, or it should be left blank.  When using VLOOKUP with databases (as is true 90% of the time), then the way to decide what to put in this argument can be thought of as follows: If the first column of the database (the column that contains the unique identifiers) is sorted alphabetically/numerically in ascending order, then it’s possible to enter a value of true into this argument, or leave it blank. If the first column of the database is not sorted, or it’s sorted in descending order, then you must enter a value of false into this argument As the first column of our database is not sorted, we enter false into this argument: That’s it!  We’ve entered all the information required for VLOOKUP to return the value we need.  Click the OK button and notice that the description corresponding to item code “R99245” has been correctly entered into cell B11: The formula that was created for us looks like this: If we enter a different item code into cell A11, we will begin to see the power of the VLOOKUP function:  The description cell changes to match the new item code: We can perform a similar set of steps to get the item’s price returned into cell E11.  Note that the new formula must be created in cell E11.  The result will look like this: …and the formula will look like this: Note that the only difference between the two formulae is the third argument (Col_index_num) has changed from a “2” to a “3” (because we want data retrieved from the 3rd column in the database). If we decided to buy 2 of these items, we would enter a “2” into cell D11.  We would then enter a simple formula into cell F11 to get the line total: =D11*E11 …which looks like this… Completing the Invoice Template We’ve learned a lot about VLOOKUP so far.  In fact, we’ve learned all we’re going to learn in this article.  It’s important to note that VLOOKUP can be used in other circumstances besides databases.  This is less common, and may be covered in future How-To Geek articles. Our invoice template is not yet complete.  In order to complete it, we would do the following: We would remove the sample item code from cell A11 and the “2” from cell D11.  This will cause our newly created VLOOKUP formulae to display error messages: We can remedy this by judicious use of Excel’s IF() and ISBLANK() functions.  We change our formula from this…       =VLOOKUP(A11,’Product Database’!A2:D7,2,FALSE) …to this…       =IF(ISBLANK(A11),”",VLOOKUP(A11,’Product Database’!A2:D7,2,FALSE)) We would copy the formulas in cells B11, E11 and F11 down to the remainder of the item rows of the invoice.  Note that if we do this, the resulting formulas will no longer correctly refer to the database table.  We could fix this by changing the cell references for the database to absolute cell references.  Alternatively – and even better – we could create a range name for the entire product database (such as “Products”), and use this range name instead of the cell references.  The formula would change from this…       =IF(ISBLANK(A11),”",VLOOKUP(A11,’Product Database’!A2:D7,2,FALSE)) …to this…       =IF(ISBLANK(A11),”",VLOOKUP(A11,Products,2,FALSE)) …and then copy the formulas down to the rest of the invoice item rows. We would probably “lock” the cells that contain our formulae (or rather unlock the other cells), and then protect the worksheet, in order to ensure that our carefully constructed formulae are not accidentally overwritten when someone comes to fill in the invoice. We would save the file as a template, so that it could be reused by everyone in our company If we were feeling really clever, we would create a database of all our customers in another worksheet, and then use the customer ID entered in cell F5 to automatically fill in the customer’s name and address in cells B6, B7 and B8. If you would like to practice with VLOOKUP, or simply see our resulting Invoice Template, it can be downloaded from here. Similar Articles Productive Geek Tips Make Excel 2007 Print Gridlines In Workbook FileMake Excel 2007 Always Save in Excel 2003 FormatConvert Older Excel Documents to Excel 2007 FormatImport Microsoft Access Data Into ExcelChange the Default Font in Excel 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data

  Read the article

• Binding collection indexes to a WPF DataGrid at runtime

  - by bearda

  After trying to develop our own control to display a table of data we stumbled on the WPF toolkit DataGrid and thought we were saved. A couple hours later I'm scratching my head trying to figure out if it can do what we really want it to do. The DataGrid seems to be based on displaying various properties of a single object, where I think I need something that can display a collection's items, I want to display a table of strings with a variable number of rows and a variable number of columns. Each row represents the state of a number of inputs at a given time. The number of samples may change, and the number of inputs may change at runtime. As a result, I can't create a custom object that represents a row with a property for each input. This makes the DataGrid binding more complicated, since I can't bind to a fixed property for each column. I thought I found a workaround for this by binding to ".[" + channelIndex + ]" but it hasn't worked out quite the way I wanted. Right now I have a collection of a collection of strings that represents the two-dimensional array of strings. I'm using ObservableCollection so string change event notifications work, but I can use any collection type needed. It looked like everything was working great until I realized that every row was showing the same line of data. Binding in C# is not my strong suit, so I'm kind of lost on what's going wrong. Is what I'm trying to do overall even possible with the WPF Toolkit DataGrid? using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using Microsoft.Windows.Controls; using System.ComponentModel; using System.Collections; using System.Collections.ObjectModel; namespace WRE.NGDAS.UILayer { /// <summary> /// Interaction logic for DataTableControl.xaml /// </summary> public partial class DataTableControl : UserControl { #region Constants private const int lineHeight = 25; #endregion #region Type Definitions private class TableChannelInfo { internal string ChannelName = string.Empty; internal int Column = 0; public override string ToString() { return ChannelName; } } internal class NotifyString : INotifyPropertyChanged { private string text = String.Empty; public event PropertyChangedEventHandler PropertyChanged; public string Text { get { return text; } set { text = value; NotifyPropertyChanged( "Text" ); } } public NotifyString(string newText) { text = newText; } protected void NotifyPropertyChanged( string propertyChanged ) { if ( PropertyChanged != null ) { PropertyChanged(this, new PropertyChangedEventArgs(propertyChanged)); } } } #endregion #region Private Data Members string[] channels = null; int numberFixed = 0; int numberOfRows = 0; ObservableCollection<ObservableCollection<NotifyString>> tableText = null; #endregion public DataTableControl( List<string> channelNames, List<string> nameToolTips, int numberFixedColumns, int numberRows ) { InitializeComponent(); numberFixed = numberFixedColumns; numberOfRows = numberRows; tableText = new ObservableCollection<ObservableCollection<NotifyString>>(); dataGrid.ItemsSource = tableText; channels = new string[channelNames.Count]; for (int channelIndex = 0; channelIndex < channelNames.Count; channelIndex++) { channels[channelIndex] = channelNames[channelIndex]; tableText.Add(new ObservableCollection<NotifyString>()); for (int i = 0; i < numberOfRows; i++) { tableText[channelIndex].Add( new NotifyString(String.Empty) ); } Binding textBinding = new Binding( ".[" + channelIndex + "]" ); textBinding.Mode = BindingMode.OneWay; textBinding.UpdateSourceTrigger = UpdateSourceTrigger.PropertyChanged; textBinding.Source = tableText[channelIndex]; DataGridTextColumn newColumn = new DataGridTextColumn(); newColumn.Header = channelNames[channelIndex]; newColumn.DisplayIndex = channelIndex; newColumn.Binding = textBinding; if ( channelIndex < numberFixed ) { newColumn.CanUserReorder = false; } dataGrid.Columns.Add(newColumn); } //Height = lineHeight + numberOfRows * lineHeight; } internal void UpdateChannelRow( int rowNumber, List<string> channelValues, DisplayColors color ) { if ( rowNumber < numberOfRows ) { for (int column = 0; column < channelValues.Count; column++) { if ( column < channels.GetLength(0) ) { tableText[column][rowNumber].Text = channelValues[column]; } } } } } }

  Read the article

• ASP.NET MVC 3 Hosting :: How to Deploy Web Apps Using ASP.NET MVC 3, Razor and EF Code First - Part I

  - by mbridge

  First, you can download the source code from http://efmvc.codeplex.com. The following frameworks will be used for this step by step tutorial. public class Category {     public int CategoryId { get; set; }     [Required(ErrorMessage = "Name Required")]     [StringLength(25, ErrorMessage = "Must be less than 25 characters")]     public string Name { get; set;}     public string Description { get; set; }     public virtual ICollection<Expense> Expenses { get; set; } } Expense Class public class Expense {             public int ExpenseId { get; set; }            public string  Transaction { get; set; }     public DateTime Date { get; set; }     public double Amount { get; set; }     public int CategoryId { get; set; }     public virtual Category Category { get; set; } }    Define Domain Model Let’s create domain model for our simple web application Category Class We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. In this post, we will be focusing on CRUD operations for the entity Category and will be working on the Expense entity with a View Model object in the later post. And the source code for this application will be refactored over time. The above entities are very simple POCO (Plain Old CLR Object) classes and the entity Category is decorated with validation attributes in the System.ComponentModel.DataAnnotations namespace. Now we want to use these entities for defining model objects for the Entity Framework 4. Using the Code First approach of Entity Framework, we can first define the entities by simply writing POCO classes without any coupling with any API or database library. This approach lets you focus on domain model which will enable Domain-Driven Development for applications. EF code first support is currently enabled with a separate API that is runs on top of the Entity Framework 4. EF Code First is reached CTP 5 when I am writing this article. Creating Context Class for Entity Framework We have created our domain model and let’s create a class in order to working with Entity Framework Code First. For this, you have to download EF Code First CTP 5 and add reference to the assembly EntitFramework.dll. You can also use NuGet to download add reference to EEF Code First. public class MyFinanceContext : DbContext {     public MyFinanceContext() : base("MyFinance") { }     public DbSet<Category> Categories { get; set; }     public DbSet<Expense> Expenses { get; set; }         }   The above class MyFinanceContext is derived from DbContext that can connect your model classes to a database. The MyFinanceContext class is mapping our Category and Expense class into database tables Categories and Expenses using DbSet<TEntity> where TEntity is any POCO class. When we are running the application at first time, it will automatically create the database. EF code-first look for a connection string in web.config or app.config that has the same name as the dbcontext class. If it is not find any connection string with the convention, it will automatically create database in local SQL Express database by default and the name of the database will be same name as the dbcontext class. You can also define the name of database in constructor of the the dbcontext class. Unlike NHibernate, we don’t have to use any XML based mapping files or Fluent interface for mapping between our model and database. The model classes of Code First are working on the basis of conventions and we can also use a fluent API to refine our model. The convention for primary key is ‘Id’ or ‘<class name>Id’.  If primary key properties are detected with type ‘int’, ‘long’ or ‘short’, they will automatically registered as identity columns in the database by default. Primary key detection is not case sensitive. We can define our model classes with validation attributes in the System.ComponentModel.DataAnnotations namespace and it automatically enforces validation rules when a model object is updated or saved. Generic Repository for EF Code First We have created model classes and dbcontext class. Now we have to create generic repository pattern for data persistence with EF code first. If you don’t know about the repository pattern, checkout Martin Fowler’s article on Repository Let’s create a generic repository to working with DbContext and DbSet generics. public interface IRepository<T> where T : class     {         void Add(T entity);         void Delete(T entity);         T GetById(long Id);         IEnumerable<T> All();     } RepositoryBasse – Generic Repository class protected MyFinanceContext Database {     get { return database ?? (database = DatabaseFactory.Get()); } } public virtual void Add(T entity) {     dbset.Add(entity);            }        public virtual void Delete(T entity) {     dbset.Remove(entity); }   public virtual T GetById(long id) {     return dbset.Find(id); }   public virtual IEnumerable<T> All() {     return dbset.ToList(); } } DatabaseFactory class public class DatabaseFactory : Disposable, IDatabaseFactory {     private MyFinanceContext database;     public MyFinanceContext Get()     {         return database ?? (database = new MyFinanceContext());     }     protected override void DisposeCore()     {         if (database != null)             database.Dispose();     } } Unit of Work If you are new to Unit of Work pattern, checkout Fowler’s article on Unit of Work . According to Martin Fowler, the Unit of Work pattern "maintains a list of objects affected by a business transaction and coordinates the writing out of changes and the resolution of concurrency problems." Let’s create a class for handling Unit of Work public interface IUnitOfWork {     void Commit(); } UniOfWork class public class UnitOfWork : IUnitOfWork {     private readonly IDatabaseFactory databaseFactory;     private MyFinanceContext dataContext;       public UnitOfWork(IDatabaseFactory databaseFactory)     {         this.databaseFactory = databaseFactory;     }       protected MyFinanceContext DataContext     {         get { return dataContext ?? (dataContext = databaseFactory.Get()); }     }       public void Commit()     {         DataContext.Commit();     } } The Commit method of the UnitOfWork will call the commit method of MyFinanceContext class and it will execute the SaveChanges method of DbContext class.   Repository class for Category In this post, we will be focusing on the persistence against Category entity and will working on other entities in later post. Let’s create a repository for handling CRUD operations for Category using derive from a generic Repository RepositoryBase<T>. public class CategoryRepository: RepositoryBase<Category>, ICategoryRepository     {     public CategoryRepository(IDatabaseFactory databaseFactory)         : base(databaseFactory)         {         }                } public interface ICategoryRepository : IRepository<Category> { } If we need additional methods than generic repository for the Category, we can define in the CategoryRepository. Dependency Injection using Unity 2.0 If you are new to Inversion of Control/ Dependency Injection or Unity, please have a look on my articles at http://weblogs.asp.net/shijuvarghese/archive/tags/IoC/default.aspx. I want to create a custom lifetime manager for Unity to store container in the current HttpContext. public class HttpContextLifetimeManager<T> : LifetimeManager, IDisposable {     public override object GetValue()     {         return HttpContext.Current.Items[typeof(T).AssemblyQualifiedName];     }     public override void RemoveValue()     {         HttpContext.Current.Items.Remove(typeof(T).AssemblyQualifiedName);     }     public override void SetValue(object newValue)     {         HttpContext.Current.Items[typeof(T).AssemblyQualifiedName] = newValue;     }     public void Dispose()     {         RemoveValue();     } } Let’s create controller factory for Unity in the ASP.NET MVC 3 application.                 404, String.Format(                     "The controller for path '{0}' could not be found" +     "or it does not implement IController.",                 reqContext.HttpContext.Request.Path));       if (!typeof(IController).IsAssignableFrom(controllerType))         throw new ArgumentException(                 string.Format(                     "Type requested is not a controller: {0}",                     controllerType.Name),                     "controllerType");     try     {         controller= container.Resolve(controllerType) as IController;     }     catch (Exception ex)     {         throw new InvalidOperationException(String.Format(                                 "Error resolving controller {0}",                                 controllerType.Name), ex);     }     return controller; }   } Configure contract and concrete types in Unity Let’s configure our contract and concrete types in Unity for resolving our dependencies. private void ConfigureUnity() {     //Create UnityContainer               IUnityContainer container = new UnityContainer()                 .RegisterType<IDatabaseFactory, DatabaseFactory>(new HttpContextLifetimeManager<IDatabaseFactory>())     .RegisterType<IUnitOfWork, UnitOfWork>(new HttpContextLifetimeManager<IUnitOfWork>())     .RegisterType<ICategoryRepository, CategoryRepository>(new HttpContextLifetimeManager<ICategoryRepository>());                 //Set container for Controller Factory                ControllerBuilder.Current.SetControllerFactory(             new UnityControllerFactory(container)); } In the above ConfigureUnity method, we are registering our types onto Unity container with custom lifetime manager HttpContextLifetimeManager. Let’s call ConfigureUnity method in the Global.asax.cs for set controller factory for Unity and configuring the types with Unity. protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     ConfigureUnity(); } Developing web application using ASP.NET MVC 3 We have created our domain model for our web application and also have created repositories and configured dependencies with Unity container. Now we have to create controller classes and views for doing CRUD operations against the Category entity. Let’s create controller class for Category Category Controller public class CategoryController : Controller {     private readonly ICategoryRepository categoryRepository;     private readonly IUnitOfWork unitOfWork;           public CategoryController(ICategoryRepository categoryRepository, IUnitOfWork unitOfWork)     {         this.categoryRepository = categoryRepository;         this.unitOfWork = unitOfWork;     }       public ActionResult Index()     {         var categories = categoryRepository.All();         return View(categories);     }     [HttpGet]     public ActionResult Edit(int id)     {         var category = categoryRepository.GetById(id);         return View(category);     }       [HttpPost]     public ActionResult Edit(int id, FormCollection collection)     {         var category = categoryRepository.GetById(id);         if (TryUpdateModel(category))         {             unitOfWork.Commit();             return RedirectToAction("Index");         }         else return View(category);                 }       [HttpGet]     public ActionResult Create()     {         var category = new Category();         return View(category);     }           [HttpPost]     public ActionResult Create(Category category)     {         if (!ModelState.IsValid)         {             return View("Create", category);         }                     categoryRepository.Add(category);         unitOfWork.Commit();         return RedirectToAction("Index");     }       [HttpPost]     public ActionResult Delete(int  id)     {         var category = categoryRepository.GetById(id);         categoryRepository.Delete(category);         unitOfWork.Commit();         var categories = categoryRepository.All();         return PartialView("CategoryList", categories);       }        } Creating Views in Razor Now we are going to create views in Razor for our ASP.NET MVC 3 application.  Let’s create a partial view CategoryList.cshtml for listing category information and providing link for Edit and Delete operations. CategoryList.cshtml @using MyFinance.Helpers; @using MyFinance.Domain; @model IEnumerable<Category>      <table>         <tr>         <th>Actions</th>         <th>Name</th>          <th>Description</th>         </tr>     @foreach (var item in Model) {             <tr>             <td>                 @Html.ActionLink("Edit", "Edit",new { id = item.CategoryId })                 @Ajax.ActionLink("Delete", "Delete", new { id = item.CategoryId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divCategoryList" })                           </td>             <td>                 @item.Name             </td>             <td>                 @item.Description             </td>         </tr>         }       </table>     <p>         @Html.ActionLink("Create New", "Create")     </p> The delete link is providing Ajax functionality using the Ajax.ActionLink. This will call an Ajax request for Delete action method in the CategoryCotroller class. In the Delete action method, it will return Partial View CategoryList after deleting the record. We are using CategoryList view for the Ajax functionality and also for Index view using for displaying list of category information. Let’s create Index view using partial view CategoryList  Index.chtml @model IEnumerable<MyFinance.Domain.Category> @{     ViewBag.Title = "Index"; }    <h2>Category List</h2>    <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script>    <div id="divCategoryList">               @Html.Partial("CategoryList", Model) </div> We can call the partial views using Html.Partial helper method. Now we are going to create View pages for insert and update functionality for the Category. Both view pages are sharing common user interface for entering the category information. So I want to create an EditorTemplate for the Category information. We have to create the EditorTemplate with the same name of entity object so that we can refer it on view pages using @Html.EditorFor(model => model) . So let’s create template with name Category. Category.cshtml @model MyFinance.Domain.Category <div class="editor-label"> @Html.LabelFor(model => model.Name) </div> <div class="editor-field"> @Html.EditorFor(model => model.Name) @Html.ValidationMessageFor(model => model.Name) </div> <div class="editor-label"> @Html.LabelFor(model => model.Description) </div> <div class="editor-field"> @Html.EditorFor(model => model.Description) @Html.ValidationMessageFor(model => model.Description) </div> Let’s create view page for insert Category information @model MyFinance.Domain.Category   @{     ViewBag.Title = "Save"; }   <h2>Create</h2>   <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script>   @using (Html.BeginForm()) {     @Html.ValidationSummary(true)     <fieldset>         <legend>Category</legend>                @Html.EditorFor(model => model)               <p>             <input type="submit" value="Create" />         </p>     </fieldset> }   <div>     @Html.ActionLink("Back to List", "Index") </div> ViewStart file In Razor views, we can add a file named _viewstart.cshtml in the views directory  and this will be shared among the all views with in the Views directory. The below code in the _viewstart.cshtml, sets the Layout page for every Views in the Views folder.     @{     Layout = "~/Views/Shared/_Layout.cshtml"; } Tomorrow, we will cotinue the second part of this article. :)

  Read the article

• Developing web apps using ASP.NET MVC 3, Razor and EF Code First - Part 2

  - by shiju

  In my previous post Developing web apps using ASP.NET MVC 3, Razor and EF Code First - Part 1, we have discussed on how to work with ASP.NET MVC 3 and EF Code First for developing web apps. We have created generic repository and unit of work with EF Code First for our ASP.NET MVC 3 application and did basic CRUD operations against a simple domain entity. In this post, I will demonstrate on working with domain entity with deep object graph, Service Layer and View Models and will also complete the rest of the demo application. In the previous post, we have done CRUD operations against Category entity and this post will be focus on Expense entity those have an association with Category entity. You can download the source code from http://efmvc.codeplex.com . The following frameworks will be used for this step by step tutorial.    1. ASP.NET MVC 3 RTM    2. EF Code First CTP 5    3. Unity 2.0 Domain Model Category Entity public class Category   {       public int CategoryId { get; set; }       [Required(ErrorMessage = "Name Required")]       [StringLength(25, ErrorMessage = "Must be less than 25 characters")]       public string Name { get; set;}       public string Description { get; set; }       public virtual ICollection<Expense> Expenses { get; set; }   } Expense Entity public class Expense     {                public int ExpenseId { get; set; }                public string  Transaction { get; set; }         public DateTime Date { get; set; }         public double Amount { get; set; }         public int CategoryId { get; set; }         public virtual Category Category { get; set; }     } We have two domain entities - Category and Expense. A single category contains a list of expense transactions and every expense transaction should have a Category. Repository class for Expense Transaction Let’s create repository class for handling CRUD operations for Expense entity public class ExpenseRepository : RepositoryBase<Expense>, IExpenseRepository     {     public ExpenseRepository(IDatabaseFactory databaseFactory)         : base(databaseFactory)         {         }                } public interface IExpenseRepository : IRepository<Expense> { } Service Layer If you are new to Service Layer, checkout Martin Fowler's article Service Layer . According to Martin Fowler, Service Layer defines an application's boundary and its set of available operations from the perspective of interfacing client layers. It encapsulates the application's business logic, controlling transactions and coordinating responses in the implementation of its operations. Controller classes should be lightweight and do not put much of business logic onto it. We can use the service layer as the business logic layer and can encapsulate the rules of the application. Let’s create a Service class for coordinates the transaction for Expense public interface IExpenseService {     IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime ednDate);     Expense GetExpense(int id);             void CreateExpense(Expense expense);     void DeleteExpense(int id);     void SaveExpense(); } public class ExpenseService : IExpenseService {     private readonly IExpenseRepository expenseRepository;            private readonly IUnitOfWork unitOfWork;     public ExpenseService(IExpenseRepository expenseRepository, IUnitOfWork unitOfWork)     {                  this.expenseRepository = expenseRepository;         this.unitOfWork = unitOfWork;     }     public IEnumerable<Expense> GetExpenses(DateTime startDate, DateTime endDate)     {         var expenses = expenseRepository.GetMany(exp => exp.Date >= startDate && exp.Date <= endDate);         return expenses;     }     public void CreateExpense(Expense expense)     {         expenseRepository.Add(expense);         unitOfWork.Commit();     }     public Expense GetExpense(int id)     {         var expense = expenseRepository.GetById(id);         return expense;     }     public void DeleteExpense(int id)     {         var expense = expenseRepository.GetById(id);         expenseRepository.Delete(expense);         unitOfWork.Commit();     }     public void SaveExpense()     {         unitOfWork.Commit();     } }   View Model for Expense Transactions In real world ASP.NET MVC applications, we need to design model objects especially for our views. Our domain objects are mainly designed for the needs for domain model and it is representing the domain of our applications. On the other hand, View Model objects are designed for our needs for views. We have an Expense domain entity that has an association with Category. While we are creating a new Expense, we have to specify that in which Category belongs with the new Expense transaction. The user interface for Expense transaction will have form fields for representing the Expense entity and a CategoryId for representing the Category. So let's create view model for representing the need for Expense transactions. public class ExpenseViewModel {     public int ExpenseId { get; set; }       [Required(ErrorMessage = "Category Required")]     public int CategoryId { get; set; }       [Required(ErrorMessage = "Transaction Required")]     public string Transaction { get; set; }       [Required(ErrorMessage = "Date Required")]     public DateTime Date { get; set; }       [Required(ErrorMessage = "Amount Required")]     public double Amount { get; set; }       public IEnumerable<SelectListItem> Category { get; set; } } The ExpenseViewModel is designed for the purpose of View template and contains the all validation rules. It has properties for mapping values to Expense entity and a property Category for binding values to a drop-down for list values of Category. Create Expense transaction Let’s create action methods in the ExpenseController for creating expense transactions public ActionResult Create() {     var expenseModel = new ExpenseViewModel();     var categories = categoryService.GetCategories();     expenseModel.Category = categories.ToSelectListItems(-1);     expenseModel.Date = DateTime.Today;     return View(expenseModel); } [HttpPost] public ActionResult Create(ExpenseViewModel expenseViewModel) {                      if (!ModelState.IsValid)         {             var categories = categoryService.GetCategories();             expenseViewModel.Category = categories.ToSelectListItems(expenseViewModel.CategoryId);             return View("Save", expenseViewModel);         }         Expense expense=new Expense();         ModelCopier.CopyModel(expenseViewModel,expense);         expenseService.CreateExpense(expense);         return RedirectToAction("Index");              } In the Create action method for HttpGet request, we have created an instance of our View Model ExpenseViewModel with Category information for the drop-down list and passing the Model object to View template. The extension method ToSelectListItems is shown below   public static IEnumerable<SelectListItem> ToSelectListItems(         this IEnumerable<Category> categories, int  selectedId) {     return           categories.OrderBy(category => category.Name)                 .Select(category =>                     new SelectListItem                     {                         Selected = (category.CategoryId == selectedId),                         Text = category.Name,                         Value = category.CategoryId.ToString()                     }); } In the Create action method for HttpPost, our view model object ExpenseViewModel will map with posted form input values. We need to create an instance of Expense for the persistence purpose. So we need to copy values from ExpenseViewModel object to Expense object. ASP.NET MVC futures assembly provides a static class ModelCopier that can use for copying values between Model objects. ModelCopier class has two static methods - CopyCollection and CopyModel.CopyCollection method will copy values between two collection objects and CopyModel will copy values between two model objects. We have used CopyModel method of ModelCopier class for copying values from expenseViewModel object to expense object. Finally we did a call to CreateExpense method of ExpenseService class for persisting new expense transaction. List Expense Transactions We want to list expense transactions based on a date range. So let’s create action method for filtering expense transactions with a specified date range. public ActionResult Index(DateTime? startDate, DateTime? endDate) {     //If date is not passed, take current month's first and last dte     DateTime dtNow;     dtNow = DateTime.Today;     if (!startDate.HasValue)     {         startDate = new DateTime(dtNow.Year, dtNow.Month, 1);         endDate = startDate.Value.AddMonths(1).AddDays(-1);     }     //take last date of start date's month, if end date is not passed     if (startDate.HasValue && !endDate.HasValue)     {         endDate = (new DateTime(startDate.Value.Year, startDate.Value.Month, 1)).AddMonths(1).AddDays(-1);     }     var expenses = expenseService.GetExpenses(startDate.Value ,endDate.Value);     //if request is Ajax will return partial view     if (Request.IsAjaxRequest())     {         return PartialView("ExpenseList", expenses);     }     //set start date and end date to ViewBag dictionary     ViewBag.StartDate = startDate.Value.ToShortDateString();     ViewBag.EndDate = endDate.Value.ToShortDateString();     //if request is not ajax     return View(expenses); } We are using the above Index Action method for both Ajax requests and normal requests. If there is a request for Ajax, we will call the PartialView ExpenseList. Razor Views for listing Expense information Let’s create view templates in Razor for showing list of Expense information ExpenseList.cshtml @model IEnumerable<MyFinance.Domain.Expense>   <table>         <tr>             <th>Actions</th>             <th>Category</th>             <th>                 Transaction             </th>             <th>                 Date             </th>             <th>                 Amount             </th>         </tr>       @foreach (var item in Model) {              <tr>             <td>                 @Html.ActionLink("Edit", "Edit",new { id = item.ExpenseId })                 @Ajax.ActionLink("Delete", "Delete", new { id = item.ExpenseId }, new AjaxOptions { Confirm = "Delete Expense?", HttpMethod = "Post", UpdateTargetId = "divExpenseList" })             </td>              <td>                 @item.Category.Name             </td>             <td>                 @item.Transaction             </td>             <td>                 @String.Format("{0:d}", item.Date)             </td>             <td>                 @String.Format("{0:F}", item.Amount)             </td>         </tr>          }       </table>     <p>         @Html.ActionLink("Create New Expense", "Create") |         @Html.ActionLink("Create New Category", "Create","Category")     </p> Index.cshtml @using MyFinance.Helpers; @model IEnumerable<MyFinance.Domain.Expense> @{     ViewBag.Title = "Index"; }    <h2>Expense List</h2>    <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-ui.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.ui.datepicker.js")" type="text/javascript"></script> <link href="@Url.Content("~/Content/jquery-ui-1.8.6.custom.css")" rel="stylesheet" type="text/css" />      @using (Ajax.BeginForm(new AjaxOptions{ UpdateTargetId="divExpenseList", HttpMethod="Get"})) {     <table>         <tr>         <td>         <div>           Start Date: @Html.TextBox("StartDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["StartDate"].ToString())), new { @class = "ui-datepicker" })         </div>         </td>         <td><div>            End Date: @Html.TextBox("EndDate", Html.Encode(String.Format("{0:mm/dd/yyyy}", ViewData["EndDate"].ToString())), new { @class = "ui-datepicker" })          </div></td>          <td> <input type="submit" value="Search By TransactionDate" /></td>         </tr>     </table>         }   <div id="divExpenseList">             @Html.Partial("ExpenseList", Model)     </div> <script type="text/javascript">     $().ready(function () {         $('.ui-datepicker').datepicker({             dateFormat: 'mm/dd/yy',             buttonImage: '@Url.Content("~/Content/calendar.gif")',             buttonImageOnly: true,             showOn: "button"         });     }); </script> Ajax search functionality using Ajax.BeginForm The search functionality of Index view is providing Ajax functionality using Ajax.BeginForm. The Ajax.BeginForm() method writes an opening <form> tag to the response. You can use this method in a using block. In that case, the method renders the closing </form> tag at the end of the using block and the form is submitted asynchronously by using JavaScript. The search functionality will call the Index Action method and this will return partial view ExpenseList for updating the search result. We want to update the response UI for the Ajax request onto divExpenseList element. So we have specified the UpdateTargetId as "divExpenseList" in the Ajax.BeginForm method. Add jQuery DatePicker Our search functionality is using a date range so we are providing two date pickers using jQuery datepicker. You need to add reference to the following JavaScript files to working with jQuery datepicker. jquery-ui.js jquery.ui.datepicker.js For theme support for datepicker, we can use a customized CSS class. In our example we have used a CSS file “jquery-ui-1.8.6.custom.css”. For more details about the datepicker component, visit jquery UI website at http://jqueryui.com/demos/datepicker . In the jQuery ready event, we have used following JavaScript function to initialize the UI element to show date picker. <script type="text/javascript">     $().ready(function () {         $('.ui-datepicker').datepicker({             dateFormat: 'mm/dd/yy',             buttonImage: '@Url.Content("~/Content/calendar.gif")',             buttonImageOnly: true,             showOn: "button"         });     }); </script>   Source Code You can download the source code from http://efmvc.codeplex.com/ . Summary In this two-part series, we have created a simple web application using ASP.NET MVC 3 RTM, Razor and EF Code First CTP 5. I have demonstrated patterns and practices  such as Dependency Injection, Repository pattern, Unit of Work, ViewModel and Service Layer. My primary objective was to demonstrate different practices and options for developing web apps using ASP.NET MVC 3 and EF Code First. You can implement these approaches in your own way for building web apps using ASP.NET MVC 3. I will refactor this demo app on later time.

  Read the article

• Beware Sneaky Reads with Unique Indexes

  - by Paul White NZ

  A few days ago, Sandra Mueller (twitter | blog) asked a question using twitter’s #sqlhelp hash tag: “Might SQL Server retrieve (out-of-row) LOB data from a table, even if the column isn’t referenced in the query?” Leaving aside trivial cases (like selecting a computed column that does reference the LOB data), one might be tempted to say that no, SQL Server does not read data you haven’t asked for.  In general, that’s quite correct; however there are cases where SQL Server might sneakily retrieve a LOB column… Example Table Here’s a T-SQL script to create that table and populate it with 1,000 rows: CREATE TABLE dbo.LOBtest ( pk INTEGER IDENTITY NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( some_value, lob_data ) SELECT TOP (1000) N.n, @Data FROM Numbers N WHERE N.n <= 1000; Test 1: A Simple Update Let’s run a query to subtract one from every value in the some_value column: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; As you might expect, modifying this integer column in 1,000 rows doesn’t take very long, or use many resources.  The STATITICS IO and TIME output shows a total of 9 logical reads, and 25ms elapsed time.  The query plan is also very simple: Looking at the Clustered Index Scan, we can see that SQL Server only retrieves the pk and some_value columns during the scan: The pk column is needed by the Clustered Index Update operator to uniquely identify the row that is being changed.  The some_value column is used by the Compute Scalar to calculate the new value.  (In case you are wondering what the Top operator is for, it is used to enforce SET ROWCOUNT). Test 2: Simple Update with an Index Now let’s create a nonclustered index keyed on the some_value column, with lob_data as an included column: CREATE NONCLUSTERED INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); This is not a useful index for our simple update query; imagine that someone else created it for a different purpose.  Let’s run our update query again: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; We find that it now requires 4,014 logical reads and the elapsed query time has increased to around 100ms.  The extra logical reads (4 per row) are an expected consequence of maintaining the nonclustered index. The query plan is very similar to before (click to enlarge): The Clustered Index Update operator picks up the extra work of maintaining the nonclustered index. The new Compute Scalar operators detect whether the value in the some_value column has actually been changed by the update.  SQL Server may be able to skip maintaining the nonclustered index if the value hasn’t changed (see my previous post on non-updating updates for details).  Our simple query does change the value of some_data in every row, so this optimization doesn’t add any value in this specific case. The output list of columns from the Clustered Index Scan hasn’t changed from the one shown previously: SQL Server still just reads the pk and some_data columns.  Cool. Overall then, adding the nonclustered index hasn’t had any startling effects, and the LOB column data still isn’t being read from the table.  Let’s see what happens if we make the nonclustered index unique. Test 3: Simple Update with a Unique Index Here’s the script to create a new unique index, and drop the old one: CREATE UNIQUE NONCLUSTERED INDEX [UQ dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest (some_value) INCLUDE ( lob_data ) WITH ( FILLFACTOR = 100, MAXDOP = 1, SORT_IN_TEMPDB = ON ); GO DROP INDEX [IX dbo.LOBtest some_value (lob_data)] ON dbo.LOBtest; Remember that SQL Server only enforces uniqueness on index keys (the some_data column).  The lob_data column is simply stored at the leaf-level of the non-clustered index.  With that in mind, we might expect this change to make very little difference.  Let’s see: UPDATE dbo.LOBtest WITH (TABLOCKX) SET some_value = some_value - 1; Whoa!  Now look at the elapsed time and logical reads: Scan count 1, logical reads 2016, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   CPU time = 172 ms, elapsed time = 16172 ms. Even with all the data and index pages in memory, the query took over 16 seconds to update just 1,000 rows, performing over 52,000 LOB logical reads (nearly 16,000 of those using read-ahead). Why on earth is SQL Server reading LOB data in a query that only updates a single integer column? The Query Plan The query plan for test 3 looks a bit more complex than before: In fact, the bottom level is exactly the same as we saw with the non-unique index.  The top level has heaps of new stuff though, which I’ll come to in a moment. You might be expecting to find that the Clustered Index Scan is now reading the lob_data column (for some reason).  After all, we need to explain where all the LOB logical reads are coming from.  Sadly, when we look at the properties of the Clustered Index Scan, we see exactly the same as before: SQL Server is still only reading the pk and some_value columns – so what’s doing the LOB reads? Updates that Sneakily Read Data We have to go as far as the Clustered Index Update operator before we see LOB data in the output list: [Expr1020] is a bit flag added by an earlier Compute Scalar.  It is set true if the some_value column has not been changed (part of the non-updating updates optimization I mentioned earlier). The Clustered Index Update operator adds two new columns: the lob_data column, and some_value_OLD.  The some_value_OLD column, as the name suggests, is the pre-update value of the some_value column.  At this point, the clustered index has already been updated with the new value, but we haven’t touched the nonclustered index yet. An interesting observation here is that the Clustered Index Update operator can read a column into the data flow as part of its update operation.  SQL Server could have read the LOB data as part of the initial Clustered Index Scan, but that would mean carrying the data through all the operations that occur prior to the Clustered Index Update.  The server knows it will have to go back to the clustered index row to update it, so it delays reading the LOB data until then.  Sneaky! Why the LOB Data Is Needed This is all very interesting (I hope), but why is SQL Server reading the LOB data?  For that matter, why does it need to pass the pre-update value of the some_value column out of the Clustered Index Update? The answer relates to the top row of the query plan for test 3.  I’ll reproduce it here for convenience: Notice that this is a wide (per-index) update plan.  SQL Server used a narrow (per-row) update plan in test 2, where the Clustered Index Update took care of maintaining the nonclustered index too.  I’ll talk more about this difference shortly. The Split/Sort/Collapse combination is an optimization, which aims to make per-index update plans more efficient.  It does this by breaking each update into a delete/insert pair, reordering the operations, removing any redundant operations, and finally applying the net effect of all the changes to the nonclustered index. Imagine we had a unique index which currently holds three rows with the values 1, 2, and 3.  If we run a query that adds 1 to each row value, we would end up with values 2, 3, and 4.  The net effect of all the changes is the same as if we simply deleted the value 1, and added a new value 4. By applying net changes, SQL Server can also avoid false unique-key violations.  If we tried to immediately update the value 1 to a 2, it would conflict with the existing value 2 (which would soon be updated to 3 of course) and the query would fail.  You might argue that SQL Server could avoid the uniqueness violation by starting with the highest value (3) and working down.  That’s fine, but it’s not possible to generalize this logic to work with every possible update query. SQL Server has to use a wide update plan if it sees any risk of false uniqueness violations.  It’s worth noting that the logic SQL Server uses to detect whether these violations are possible has definite limits.  As a result, you will often receive a wide update plan, even when you can see that no violations are possible. Another benefit of this optimization is that it includes a sort on the index key as part of its work.  Processing the index changes in index key order promotes sequential I/O against the nonclustered index. A side-effect of all this is that the net changes might include one or more inserts.  In order to insert a new row in the index, SQL Server obviously needs all the columns – the key column and the included LOB column.  This is the reason SQL Server reads the LOB data as part of the Clustered Index Update. In addition, the some_value_OLD column is required by the Split operator (it turns updates into delete/insert pairs).  In order to generate the correct index key delete operation, it needs the old key value. The irony is that in this case the Split/Sort/Collapse optimization is anything but.  Reading all that LOB data is extremely expensive, so it is sad that the current version of SQL Server has no way to avoid it. Finally, for completeness, I should mention that the Filter operator is there to filter out the non-updating updates. Beating the Set-Based Update with a Cursor One situation where SQL Server can see that false unique-key violations aren’t possible is where it can guarantee that only one row is being updated.  Armed with this knowledge, we can write a cursor (or the WHILE-loop equivalent) that updates one row at a time, and so avoids reading the LOB data: SET NOCOUNT ON; SET STATISTICS XML, IO, TIME OFF;   DECLARE @PK INTEGER, @StartTime DATETIME; SET @StartTime = GETUTCDATE();   DECLARE curUpdate CURSOR LOCAL FORWARD_ONLY KEYSET SCROLL_LOCKS FOR SELECT L.pk FROM LOBtest L ORDER BY L.pk ASC;   OPEN curUpdate;   WHILE (1 = 1) BEGIN FETCH NEXT FROM curUpdate INTO @PK;   IF @@FETCH_STATUS = -1 BREAK; IF @@FETCH_STATUS = -2 CONTINUE;   UPDATE dbo.LOBtest SET some_value = some_value - 1 WHERE CURRENT OF curUpdate; END;   CLOSE curUpdate; DEALLOCATE curUpdate;   SELECT DATEDIFF(MILLISECOND, @StartTime, GETUTCDATE()); That completes the update in 1280 milliseconds (remember test 3 took over 16 seconds!) I used the WHERE CURRENT OF syntax there and a KEYSET cursor, just for the fun of it.  One could just as well use a WHERE clause that specified the primary key value instead. Clustered Indexes A clustered index is the ultimate index with included columns: all non-key columns are included columns in a clustered index.  Let’s re-create the test table and data with an updatable primary key, and without any non-clustered indexes: IF OBJECT_ID(N'dbo.LOBtest', N'U') IS NOT NULL DROP TABLE dbo.LOBtest; GO CREATE TABLE dbo.LOBtest ( pk INTEGER NOT NULL, some_value INTEGER NULL, lob_data VARCHAR(MAX) NULL, another_column CHAR(5) NULL, CONSTRAINT [PK dbo.LOBtest pk] PRIMARY KEY CLUSTERED (pk ASC) ); GO DECLARE @Data VARCHAR(MAX); SET @Data = REPLICATE(CONVERT(VARCHAR(MAX), 'x'), 65540);   WITH Numbers (n) AS ( SELECT ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2 ) INSERT LOBtest WITH (TABLOCKX) ( pk, some_value, lob_data ) SELECT TOP (1000) N.n, N.n, @Data FROM Numbers N WHERE N.n <= 1000; Now here’s a query to modify the cluster keys: UPDATE dbo.LOBtest SET pk = pk + 1; The query plan is: As you can see, the Split/Sort/Collapse optimization is present, and we also gain an Eager Table Spool, for Halloween protection.  In addition, SQL Server now has no choice but to read the LOB data in the Clustered Index Scan: The performance is not great, as you might expect (even though there is no non-clustered index to maintain): Table 'LOBtest'. Scan count 1, logical reads 2011, physical reads 0, read-ahead reads 0, lob logical reads 36015, lob physical reads 0, lob read-ahead reads 15992.   Table 'Worktable'. Scan count 1, logical reads 2040, physical reads 0, read-ahead reads 0, lob logical reads 34000, lob physical reads 0, lob read-ahead reads 8000.   SQL Server Execution Times: CPU time = 483 ms, elapsed time = 17884 ms. Notice how the LOB data is read twice: once from the Clustered Index Scan, and again from the work table in tempdb used by the Eager Spool. If you try the same test with a non-unique clustered index (rather than a primary key), you’ll get a much more efficient plan that just passes the cluster key (including uniqueifier) around (no LOB data or other non-key columns): A unique non-clustered index (on a heap) works well too: Both those queries complete in a few tens of milliseconds, with no LOB reads, and just a few thousand logical reads.  (In fact the heap is rather more efficient). There are lots more fun combinations to try that I don’t have space for here. Final Thoughts The behaviour shown in this post is not limited to LOB data by any means.  If the conditions are met, any unique index that has included columns can produce similar behaviour – something to bear in mind when adding large INCLUDE columns to achieve covering queries, perhaps. Paul White Email: [email protected] Twitter: @PaulWhiteNZ

  Read the article

• Changing CSS on the fly in a UIWebView on iPhone

  - by Shaggy Frog

  Let's say I'm developing an iPhone app that is a catalogue of cars. The user will choose a car from a list, and I will present a detail view for the car, which will describe things like top speed. The detail view will essentially be a UIWebView that is loading an existing HTML file. Different users will live in different parts of the world, so they will like to see the top speed for the car in whatever units are appropriate for their locale. Let's say there are two such units: SI (km/h) and conventional (mph). Let's also say the user will be able to change the display units by hitting a button on the screen; when that happens, the detail screen should switch to show the relevant units. So far, here's what I've done to try and solve this. The HTML might look something like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-US" lang="en-US"> <head> <title>Some Car</title> <link rel="stylesheet" media="screen" type="text/css" href="persistent.css" /> <link rel="alternate stylesheet" media="screen" type="text/css" href="si.css" title="si" /> <link rel="alternate stylesheet" media="screen" type="text/css" href="conventional.css" title="conventional" /> <script type="text/javascript" src="switch.js"></script> </head> <body> <h1>Some Car</h1> <div id="si"> <h2>Top Speed: 160 km/h</h2> </div> <div id="conventional"> <h2>Top Speed: 100 mph</h2> </div> </body> The peristent stylesheet, persistent.css: #si { display:none; } #conventional { display:none; } The first alternate stylesheet, si.css: #si { display:inline; } #conventional { display:none; } And the second alternate stylesheet, conventional.css: #si { display:none; } #conventional { display:inline; } Based on a tutorial at A List Apart, my switch.js looks something like this: function disableStyleSheet(title) { var i, a; for (i = 0; (a = document.getElementsByTagName("link")[i]); i++) { if ((a.getAttribute("rel").indexOf("alt") != -1) && (a.getAttribute("title") == title)) { a.disabled = true; } } } function enableStyleSheet(title) { var i, a; for (i = 0; (a = document.getElementsByTagName("link")[i]); i++) { if ((a.getAttribute("rel").indexOf("alt") != -1) && (a.getAttribute("title") == title)) { a.disabled = false; } } } function switchToSiStyleSheet() { disableStyleSheet("conventional"); enableStyleSheet("si"); } function switchToConventionalStyleSheet() { disableStyleSheet("si"); enableStyleSheet("conventional"); } My button action handler looks something like this: - (void)notesButtonAction:(id)sender { static BOOL isUsingSi = YES; if (isUsingSi) { NSString* command = [[NSString alloc] initWithString:@"switchToSiStyleSheet();"]; [self.webView stringByEvaluatingJavaScriptFromString:command]; [command release]; } else { NSString* command = [[NSString alloc] initWithFormat:@"switchToConventionalStyleSheet();"]; [self.webView stringByEvaluatingJavaScriptFromString:command]; [command release]; } isUsingSi = !isUsingSi; } Here's the first problem. The first time the button is hit, the UIWebView doesn't change. The second time it's hit, it looks like the conventional style sheet is loaded. The third time, it switches to the SI style sheet; the fourth time, back to the conventional, and so on. So, basically, only that first button press doesn't seem to do anything. Here's the second problem. I'm not sure how to switch to the correct style sheet upon initial load of the UIWebView. I tried this: - (void)webViewDidFinishLoad:(UIWebView *)webView { NSString* command = [[NSString alloc] initWithString:@"switchToSiStyleSheet();"]; [self.webView stringByEvaluatingJavaScriptFromString:command]; [command release]; } But, like the first button hit, it doesn't seem to do anything. Can anyone help me with these two problems?

  Read the article

• Voice Recognition Connection problem

  - by user244190

  I,m trying to work through and test a Voice Recognition example based on the VoiceRecognition.java example at http://developer.android.com/resources/samples/ApiDemos/src/com/example/android/apis/app/VoiceRecognition.html but when click on the button to create the activity, I get a dialog that says Connection problem. My Manifest file is using the Internet Permission, and I understand it passes the to the Google Servers. Do I need to do anything else to use this. Code below UPDATE 2: Thanks to Steve, I have been able to install the USB Driver and debug the app directly on my Droid. Here is the LogCat output from clicking on my mic button: 03-08 18:36:45.686: INFO/ActivityManager(1017): Starting activity: Intent { act=android.speech.action.RECOGNIZE_SPEECH cmp=com.google.android.voicesearch/.IntentApiActivity (has extras) } 03-08 18:36:45.686: WARN/ActivityManager(1017): Activity is launching as a new task, so cancelling activity result. 03-08 18:36:45.787: DEBUG/NetworkLocationProvider(1017): setMinTime: 120000 03-08 18:36:45.889: INFO/ActivityManager(1017): Displayed activity com.google.android.voicesearch/.IntentApiActivity: 135 ms (total 135 ms) 03-08 18:36:45.905: DEBUG/NetworkLocationProvider(1017): onCellLocationChanged [802,0,0,4192,3] 03-08 18:36:45.951: INFO/MicrophoneInputStream(1429): Starting voice recognition with audio source VOICE_RECOGNITION 03-08 18:36:45.998: DEBUG/AudioHardwareMot(990): Codec sampling rate already 16000 03-08 18:36:46.092: INFO/RecognitionService(1429): ssfe url=http://www.google.com/m/voice-search 03-08 18:36:46.092: WARN/RecognitionService(1429): required parameter 'calling_package' is missing in IntentAPI request 03-08 18:36:46.115: DEBUG/AudioHardwareMot(990): Codec sampling rate already 16000 03-08 18:36:46.131: WARN/InputManagerService(1017): Starting input on non-focused client com.android.internal.view.IInputMethodClient$Stub$Proxy@4487d240 (uid=10090 pid=3132) 03-08 18:36:46.131: WARN/IInputConnectionWrapper(3132): showStatusIcon on inactive InputConnection 03-08 18:36:46.248: WARN/MediaPlayer(1429): info/warning (1, 44) 03-08 18:36:46.334: DEBUG/dalvikvm(3206): GC freed 3682 objects / 369416 bytes in 293ms 03-08 18:36:46.358: WARN/MediaPlayer(1429): info/warning (1, 44) 03-08 18:36:46.412: WARN/MediaPlayer(1429): info/warning (1, 44) 03-08 18:36:46.444: WARN/MediaPlayer(1429): info/warning (1, 44) 03-08 18:36:46.475: WARN/MediaPlayer(1429): info/warning (1, 44) 03-08 18:36:46.506: WARN/MediaPlayer(1429): info/warning (1, 44) 03-08 18:36:46.514: INFO/MediaPlayer(1429): Info (1,44) 03-08 18:36:46.514: INFO/MediaPlayer(1429): Info (1,44) 03-08 18:36:46.514: INFO/MediaPlayer(1429): Info (1,44) 03-08 18:36:46.514: INFO/MediaPlayer(1429): Info (1,44) 03-08 18:36:46.514: INFO/MediaPlayer(1429): Info (1,44) 03-08 18:36:46.514: INFO/MediaPlayer(1429): Info (1,44) The line that concerns me is the warning of the missing parameter calling-package. UPDATE: Ok, I was able to replace my emulator image with one from HTC that appears to come with Google Voice Search, however now when I run from the emulator, i'm getting an Audio Problem message with Speak Again or Cancel buttons. It appears to make it back to the onActivityResult(), but the resultCode is 0. Here is the LogCat output: 03-07 20:21:25.396: INFO/ActivityManager(578): Starting activity: Intent { action=android.speech.action.RECOGNIZE_SPEECH comp={com.google.android.voicesearch/com.google.android.voicesearch.RecognitionActivity} (has extras) } 03-07 20:21:25.406: WARN/ActivityManager(578): Activity is launching as a new task, so cancelling activity result. 03-07 20:21:25.968: WARN/ActivityManager(578): Activity pause timeout for HistoryRecord{434f7850 {com.ikonicsoft.mileagegenie/com.ikonicsoft.mileagegenie.MileageGenie}} 03-07 20:21:26.206: WARN/AudioHardwareInterface(554): getInputBufferSize bad sampling rate: 16000 03-07 20:21:26.256: ERROR/AudioRecord(819): Recording parameters are not supported: sampleRate 16000, channelCount 1, format 1 03-07 20:21:26.696: INFO/ActivityManager(578): Displayed activity com.google.android.voicesearch/.RecognitionActivity: 1295 ms 03-07 20:21:29.890: DEBUG/dalvikvm(806): threadid=3: still suspended after undo (s=1 d=1) 03-07 20:21:29.896: INFO/dalvikvm(806): Uncaught exception thrown by finalizer (will be discarded): 03-07 20:21:29.896: INFO/dalvikvm(806): Ljava/lang/IllegalStateException;: Finalizing cursor android.database.sqlite.SQLiteCursor@435d3c50 on ml_trackdata that has not been deactivated or closed 03-07 20:21:29.896: INFO/dalvikvm(806): at android.database.sqlite.SQLiteCursor.finalize(SQLiteCursor.java:596) 03-07 20:21:29.896: INFO/dalvikvm(806): at dalvik.system.NativeStart.run(Native Method) 03-07 20:21:31.468: DEBUG/dalvikvm(806): threadid=5: still suspended after undo (s=1 d=1) 03-07 20:21:32.436: WARN/IInputConnectionWrapper(806): showStatusIcon on inactive InputConnection I,m still not sure why I,m getting the Connect problem on the Droid. I can use Voice Search ok. I also tried clearing the cache, and data as described in some posts, butstill not working?? /** * Fire an intent to start the speech recognition activity. */ private void startVoiceRecognitionActivity() { Intent intent = new Intent(RecognizerIntent.ACTION_RECOGNIZE_SPEECH); intent.putExtra(RecognizerIntent.EXTRA_LANGUAGE_MODEL, RecognizerIntent.LANGUAGE_MODEL_FREE_FORM); intent.putExtra(RecognizerIntent.EXTRA_PROMPT, "Speech recognition demo"); startActivityForResult(intent, VOICE_RECOGNITION_REQUEST_CODE); } /** * Handle the results from the recognition activity. */ @Override protected void onActivityResult(int requestCode, int resultCode, Intent data) { if (requestCode == VOICE_RECOGNITION_REQUEST_CODE && resultCode == RESULT_OK) { // Fill the list view with the strings the recognizer thought it could have heard ArrayList<String> matches = data.getStringArrayListExtra( RecognizerIntent.EXTRA_RESULTS); mList.setAdapter(new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1, matches)); } super.onActivityResult(requestCode, resultCode, data); }

  Read the article

• The Product Owner

  - by Robert May

  In a previous post, I outlined the rules of Scrum.  This post details one of those rules. Picking a most important part of Scrum is difficult.  All of the rules are required, but if there were one rule that is “more” required that every other rule, its having a good Product Owner.  Simply put, the Product Owner can make or break the project. Duties of the Product Owner A Product Owner has many duties and responsibilities.  I’ll talk about each of these duties in detail below. A Product Owner: Discovers and records stories for the backlog. Prioritizes stories in the Product Backlog, Release Backlog and Iteration Backlog. Determines Release dates and Iteration Dates. Develops story details and helps the team understand those details. Helps QA to develop acceptance tests. Interact with the Customer to make sure that the product is meeting the customer’s needs. Discovers and Records Stories for the Backlog When I do Scrum, I always use User Stories as the means for capturing functionality that’s required in the system.  Some people will use Use Cases, but the same rule applies.  The Product Owner has the ultimate responsibility for figuring out what functionality will be in the system.  Many different mechanisms for capturing this input can be used.  User interviews are great, but all sources should be considered, including talking with Customer Support types.  Often, they hear what users are struggling with the most and are a great source for stories that can make the application easier to use. Care should be taken when soliciting user stories from technical types such as programmers and the people that manage them.  They will almost always give stories that are very technical in nature and may not have a direct benefit for the end user.  Stories are about adding value to the company.  If the stories don’t have direct benefit to the end user, the Product Owner should question whether or not the story should be implemented.  In general, technical stories should be included as tasks in User Stories.  Technical stories are often needed, but the ultimate value to the user is in user based functionality, so technical stories should be considered nothing more than overhead in providing that user functionality. Until the iteration prior to development, stories should be nothing more than short, one line placeholders. An exercise called Story Planning can be used to brainstorm and come up with stories.  I’ll save the description of this activity for another blog post. For more information on User Stories, please read the book User Stories Applied by Mike Cohn. Prioritizes Stories in the Product Backlog, Release Backlog and Iteration Backlog Prioritization of stories is one of the most difficult tasks that a Product Owner must do.  A key concept of Scrum done right is the need to have the team working from a single set of prioritized stories.  If the team does not have a single set of prioritized stories, Scrum will likely fail at your organization.  The Product Owner is the ONLY person who has the responsibility to prioritize that list.  The Product Owner must be very diplomatic and sincerely listen to the people around him so that he can get the priorities correct. Just listening will still not yield the proper priorities.  Care must also be taken to ensure that Return on Investment is also considered.  Ultimately, determining which stories give the most value to the company for the least cost is the most important factor in determining priorities.  Product Owners should be willing to look at cold, hard numbers to determine the order for stories.  Even when many people want a feature, if that features is costly to develop, it may not have as high of a return on investment as features that are cheaper, but not as popular. The act of prioritization often causes conflict in an environment.  Customer Service thinks that feature X is the most important, because it will stop people from calling.  Operations thinks that feature Y is the most important, because it will stop servers from crashing.  Developers think that feature Z is most important because it will make writing software much easier for them.  All of these are useful goals, but the team can have only one list of items, and each item must have a priority that is different from all other stories.  The Product Owner will determine which feature gives the best return on investment and the other features will have to wait their turn, which means that someone will not have their top priority feature implemented first. A weak Product Owner will refuse to do prioritization.  I’ve heard from multiple Product Owners the following phrase, “Well, it’s all got to be done, so what does it matter what order we do it in?”  If your product owner is using this phrase, you need a new Product Owner.  Order is VERY important.  In Scrum, every release is potentially shippable.  If the wrong priority items are developed, then the value added in each release isn’t what it should be.  Additionally, the Product Owner with this mindset doesn’t understand Agile.  A product is NEVER finished, until the company has decided that it is no longer a going concern and they are no longer going to sell the product.  Therefore, prioritization isn’t an event, its something that continues every day.  The logical extension of the phrase “It’s all got to be done” is that you will never ship your product, since a product is never “done.”  Once stories have been prioritized, assigning them to the Release Backlog and the Iteration Backlog becomes relatively simple.  The top priority items are copied into the respective backlogs in order and the task is complete.  The team does have the right to shuffle things around a little in the iteration backlog.  For example, they may determine that working on story C with story A is appropriate because they’re related, even though story B is technically a higher priority than story C.  Or they may decide that story B is too big to complete in the time available after Story A has tasks created, so they’ll work on Story C since it’s smaller.  They can’t, however, go deep into the backlog to pick stories to implement.  The team and the Product Owner should work together to determine what’s best for the company. Prioritization is time consuming, but its one of the most important things a Product Owner does. Determines Release Dates and Iteration Dates Product owners are responsible for determining release dates for a product.  A common misconception that Product Owners have is that every “release” needs to correspond with an actual release to customers.  This is not the case.  In general, releases should be no more than 3 months long.  You  may decide to release the product to the customers, and many companies do release the product to customers, but it may also be an internal release. If a release date is too far away, developers will fall into the trap of not feeling a sense of urgency.  The date is far enough away that they don’t need to give the release their full attention.  Additionally, important tasks, such as performance tuning, regression testing, user documentation, and release preparation, will not happen regularly, making them much more difficult and time consuming to do.  The more frequently you do these tasks, the easier they are to accomplish. The Product Owner will be a key participant in determining whether or not a release should be sent out to the customers.  The determination should be made on whether or not the features contained in the release are valuable enough  and complete enough that the customers will see real value in the release.  Often, some features will take more than three months to get them to a state where they qualify for a release or need additional supporting features to be released.  The product owner has the right to make this determination. In addition to release dates, the Product Owner also will help determine iteration dates.  In general, an iteration length should be chosen and the team should follow that iteration length for an extended period of time.  If the iteration length is changed every iteration, you’re not doing Scrum.  Iteration lengths help the team and company get into a rhythm of developing quality software.  Iterations should be somewhere between 2 and 4 weeks in length.  Any shorter, and significant software will likely not be developed.  Any longer, and the team won’t feel urgency and planning will become very difficult. Iterations may not be extended during the iteration.  Companies where Scrum isn’t really followed will often use this as a strategy to complete all stories.  They don’t want to face the harsh reality of what their true performance is, and looking good is more important than seeking visibility and improving the process and team.  Companies like this typically don’t allow failure.  This is unhealthy.  Failure is part of life and unless we learn from it, we can’t improve.  I would much rather see a team push out stories to the next iteration and then have healthy discussions about why they failed rather than extend the iteration and not deal with the core problems. If iteration length varies, retrospectives become more difficult.  For example, evaluating the performance of the team’s estimation efforts becomes much more difficult if the iteration length varies.  Also, the team must have a velocity measurement.  If the iteration length varies, measuring velocity becomes impossible and upper management no longer will have the ability to evaluate the teams performance.  People external to the team will no longer have the ability to determine when key features are likely to be developed.  Variable iterations cause the entire company to fail and likely cause Scrum to fail at an organization. Develops Story Details and Helps the Team Understand Those Details A key concept in Scrum is that the stories are nothing more than a placeholder for a conversation.  Stories should be nothing more than short, one line statements about the functionality.  The team will then converse with the Product Owner about the details about that story.  The product owner needs to have a very good idea about what the details of the story are and needs to be able to help the team understand those details. Too often, we see this requirement as being translated into the need for comprehensive documentation about the story, including old fashioned requirements documentation.  The team should only develop the documentation that is required and should not develop documentation that is only created because their is a process to do so. In general, what we see that works best is the iteration before a team starts development work on a story, the Product Owner, with other appropriate business analysts, will develop the details of that story.  They’ll figure out what business rules are required, potentially make paper prototypes or other light weight mock-ups, and they seek to understand the story and what is implied.  Note that the time allowed for this task is deliberately short.  The Product Owner only has a single iteration to develop all of the stories for the next iteration. If more than one iteration is used, I’ve found that teams will end up with Big Design Up Front and traditional requirements documents.  This is a waste of time, since the team will need to then have discussions with the Product Owner to figure out what the requirements document says.  Instead of this, skip making the pretty pictures and detailing the nuances of the requirements and build only what is minimally needed by the team to do development.  If something comes up during development, you can address it at that time and figure out what you want to do.  The goal is to keep things as light weight as possible so that everyone can move as quickly as possible. Helps QA to Develop Acceptance Tests In Scrum, no story can be counted until it is accepted by QA.  Because of this, acceptance tests are very important to the team.  In general, acceptance tests need to be developed prior to the iteration or at the very beginning of the iteration so that the team can make sure that the tasks that they develop will fulfill the acceptance criteria. The Product Owner will help the team, including QA, understand what will make the story acceptable.  Note that the Product Owner needs to be careful about specifying that the feature will work “Perfectly” at the end of the iteration.  In general, features are developed a little bit at a time, so only the bit that is being developed should be considered as necessary for acceptance. A weak Product Owner will make statements like “Do it right the first time.”  Not only are these statements damaging to the team (like they would try to do it WRONG the first time . . .), they’re also ignoring the iterative nature of Scrum.  Additionally, a weak product owner will seek to add scope in the acceptance testing.  For example, they will refuse to determine acceptance at the beginning of the iteration, and then, after the team has planned and committed to the iteration, they will expand scope by defining acceptance.  This often causes the team to miss the iteration because scope that wasn’t planned on is included.  There are ways that the team can mitigate this problem.  For example, include extra “Product Owner” time to deal with the uncertainty that you know will be introduced by the Product Owner.  This will slow the perceived velocity of the team and is not ideal, since they’ll be doing more work than they get credit for. Interact with the Customer to Make Sure that the Product is Meeting the Customer’s Needs Once development is complete, what the team has worked on should be put in front of real live people to see if it meets the needs of the customer.  One of the great things about Agile is that if something doesn’t work, we can revisit it in a future iteration!  This frees up the team to make the best decision now and know that if that decision proves to be incorrect, the team can revisit it and change that decision. Features are about adding value to the customer, so if the customer doesn’t find them useful, then having the team make tweaks is valuable.  In general, most software will be 80 to 90 percent “right” after the initial round and only minor tweaks are required.  If proper coding standards are followed, these tweaks are usually minor and easy to accomplish.  Product Owners that are doing a good job will encourage real users to see and use the software, since they know that they are trying to add value to the customer. Poor product owners will think that they know the answers already, that their customers are silly and do stupid things and that they don’t need customer input.  If you have a product owner that is afraid to show the team’s work to real customers, you probably need a different product owner. Up Next, “Who Makes a Good Product Owner.” Followed by, “Messing with the Team.” Technorati Tags: Scrum,Product Owner

  Read the article

• How to change the value of a JLabel in runtime?

  - by user365465

  I want to change the image a JLabel is viewing during runtime, but I keep getting NullPointerExceptions or nothing happens when I press the magic button that's supposed to do things. Is it even possible in Java? Here is my code in its entirety: import java.text.*; import javax.swing.text.*; import java.util.*; import java.awt.*; import java.awt.event.*; import javax.swing.*; import javax.swing.event.*; public class Shell implements ActionListener, MenuKeyListener { JFrame frame; JWindow window; JButton PSubmit; JPanel pane1, pane2; JRadioButton R1, R2, R3; ButtonGroup PGroup; JTabbedPane layout; String result; String border = "Border.png"; String DF = "Frame.png"; String list []; Driver driver; public Shell() { driver = new Driver(); list = new String [6]; } public void setFrame() { frame = new JFrame("Pokemon Program 3 by Systems Ready"); frame.setSize(600, 600); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setVisible(true); frame.getContentPane().setLayout(new BorderLayout()); } public void frameLayout() { layout = new JTabbedPane(); JPanel pane1 = new JPanel(); JPanel pane2 = new JPanel(); JLabel label = new JLabel("Please choose the restrictions:"); JLabel imgLabel1 = new JLabel(new ImageIcon(border)); JLabel notiLabel1 = new JLabel("The Pokemon chosen with these restrictions are: "); JLabel notiLabel2 = new JLabel("'No Restrictions': No restrictions for the kind of Pokemon chosen based on species or items."); JLabel notiLabel3 = new JLabel("'Battle Revolution': All Pokemon must have unique items."); JLabel notiLabel4 = new JLabel("'Battle Tower': All Pokemon must have unique items, Uber and Event Legendaries banned."); JLabel label2 = new JLabel("Please choose possible Pokemon:"); pane1.add(label); pearlButtons(); pane1.add(R1); pane1.add(R2); pane1.add(R3); pane1.add(PSubmit); pane1.add(notiLabel2); pane1.add(notiLabel3); pane1.add(notiLabel4); pane1.add(imgLabel1); pane1.add(notiLabel1); JLabel pokeLabel1 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel2 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel3 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel4 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel5 = new JLabel(new ImageIcon(DF)); JLabel pokeLabel6 = new JLabel(new ImageIcon(DF)); pane1.add(pokeLabel1); pane1.add(pokeLabel2); pane1.add(pokeLabel3); pane1.add(pokeLabel4); pane1.add(pokeLabel5); pane1.add(pokeLabel6); pane2.add(label2); layout.add("Pearl Version", pane1); layout.add("SoulSilver Version", pane2); frame.add(layout); } public void pearlButtons() { PGroup = new ButtonGroup(); R1 = new JRadioButton("No Restrictions", true); R1.setActionCommand("N"); R1.setVisible(true); R2 = new JRadioButton("Battle Revolution"); R2.setActionCommand("BR"); R2.setVisible(true); R3 = new JRadioButton("Battle Tower"); R3.setActionCommand("B"); R3.setVisible(true); PGroup.add(R1); PGroup.add(R2); PGroup.add(R3); PSubmit = new JButton("Submit"); PSubmit.setActionCommand("pstart"); PSubmit.setVisible(true); PSubmit.addActionListener(this); } public void pearlProcessing() { //The "list" array has a bunch of string names that get .png affixed to them (and I named the image files as such when I name them) String file1 = list[0] + ".png"; String file2 = list[1] + ".png"; String file3 = list[2] + ".png"; String file4 = list[3] + ".png"; String file5 = list[4] + ".png"; String file6 = list[5] + ".png"; /*-------------------------------------------------------------------------------// This is where the method's supposed to go to change the image... I've tried pokeLabel = new JLabel(new ImageIcon(file1));, but that yields a NullPointerException. //-----------------------------------------------------------------------------------*/ } public static void main(String[] args) { Shell test = new Shell(); test.setFrame(); test.frameLayout(); test.frame.setVisible(true); } public void actionPerformed(ActionEvent e) { if ("pstart".equals(e.getActionCommand())) { result = PGroup.getSelection().getActionCommand(); if (result.equals("N")) { list = driver.Prandom(); pearlProcessing(); } else System.out.println("Not done yet! ;)"); } } public void menuKeyPressed(MenuKeyEvent e) { System.out.println("pressed"); } public void menuKeyReleased(MenuKeyEvent e) { System.out.println("menuKeyReleased"); } public void menuKeyTyped(MenuKeyEvent e) { System.out.println("menuKeyTyped"); } }

  Read the article

• [android] MediaRecorder prepare() causes segfault

  - by dwilde1

  Folks, I have a situation where my MediaRecorder instance causes a segfault. I'm working with a HTC Hero, Android 1.5+APIs. I've tried all variations, including 3gpp and H.263 and reducing the video resolution to 320x240. What am I missing? The state machine causes 4 MediaPlayer beeps and then turns on the video camera. Here's the pertinent source: UPDATE: ADDING SURFACE CREATE INFO I have rebooted the device based on previous answer to similar question. UPDATE 2: I seem to be following the MediaRecorder state machine perfectly, and if I trap out the MR code, the blank surface displays perfectly and everything else functions perfectly. I can record videos manually and play back via MediaPlayer in my code, so there should be nothing wrong with the underlying code. I've copied sample code on the surface and surfaceHolder code. I've looked at the MR instance in the Debug perspective in Eclipse and see that all (known) variables seem to be instantiated correctly. The setter calls are all now implemented in the exaxct order specced in the state diagram. // in activity class definition protected MediaPlayer mPlayer; protected MediaRecorder mRecorder; protected boolean inCapture = false; protected int phaseCapture = 0; protected int durCapturePhase = INF; protected SurfaceView surface; protected SurfaceHolder surfaceHolder; // in onCreate() // panelPreview is an empty LinearLayout surface = new SurfaceView(getApplicationContext()); surfaceHolder = surface.getHolder(); surfaceHolder.setType(SurfaceHolder.SURFACE_TYPE_PUSH_BUFFERS); panelPreview.addView(surface); // in timer handler runnable if (mRecorder == null) mRecorder = new MediaRecorder(); mRecorder.setAudioSource(MediaRecorder.AudioSource.MIC); mRecorder.setVideoSource(MediaRecorder.VideoSource.CAMERA); mRecorder.setOutputFormat(MediaRecorder.OutputFormat.THREE_GPP); mRecorder.setAudioEncoder(MediaRecorder.AudioEncoder.AMR_NB); mRecorder.setOutputFile(path + "/" + vlip); mRecorder.setVideoSize(320, 240); mRecorder.setVideoFrameRate(15); mRecorder.setPreviewDisplay(surfaceHolder.getSurface()); panelPreview.setVisibility(LinearLayout.VISIBLE); mRecorder.prepare(); mRecorder.start(); Here is a complete log trace for the process run and crash: I/ActivityManager( 80): Start proc com.ejf.convince.jenplus for activity com.ejf.convince.jenplus/.JenPLUS: pid=17738 uid=10075 gids={1006, 3003} I/jdwp (17738): received file descriptor 10 from ADB W/System.err(17738): Can't dispatch DDM chunk 46454154: no handler defined W/System.err(17738): Can't dispatch DDM chunk 4d505251: no handler defined I/WindowManager( 80): Screen status=true, current orientation=-1, SensorEnabled=false I/WindowManager( 80): needSensorRunningLp, mCurrentAppOrientation =-1 I/WindowManager( 80): Enabling listeners W/ActivityThread(17738): Application com.ejf.convince.jenplus is waiting for the debugger on port 8100... I/System.out(17738): Sending WAIT chunk I/dalvikvm(17738): Debugger is active I/AlertDialog( 80): [onCreate] auto launch SIP. I/WindowManager( 80): onOrientationChanged, rotation changed to 0 I/System.out(17738): Debugger has connected I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): waiting for debugger to settle... I/System.out(17738): debugger has settled (1370) I/ActivityManager( 80): Displayed activity com.ejf.convince.jenplus/.JenPLUS: 5186 ms I/OpenCore( 2696): [Hank debug] LN 289 FN CreateNode I/AudioHardwareMSM72XX( 2696): AUDIO_START: start kernel pcm_out driver. W/AudioFlinger( 2696): write blocked for 96 msecs I/PlayerDriver( 2696): CIQ 1625 sendEvent state=5 I/OpenCore( 2696): [Hank debug] LN 289 FN CreateNode I/PlayerDriver( 2696): CIQ 1625 sendEvent state=5 I/OpenCore( 2696): [Hank debug] LN 289 FN CreateNode I/PlayerDriver( 2696): CIQ 1625 sendEvent state=5 I/OpenCore( 2696): [Hank debug] LN 289 FN CreateNode I/PlayerDriver( 2696): CIQ 1625 sendEvent state=5 W/AuthorDriver( 2696): Intended width(640) exceeds the max allowed width(352). Max width is used instead. W/AuthorDriver( 2696): Intended height(480) exceeds the max allowed height(288). Max height is used instead. I/AudioHardwareMSM72XX( 2696): AudioHardware pcm playback is going to standby. I/DEBUG (16094): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** I/DEBUG (16094): Build fingerprint: 'sprint/htc_heroc/heroc/heroc: 1.5/CUPCAKE/85027:user/release-keys' I/DEBUG (16094): pid: 17738, tid: 17738 com.ejf.convince.jenplus Thanks in advance! -- Don Wilde http://www.ConvinceProject.com

  Read the article

• Searching for Windows User SID's in C#

  - by Ubiquitous Che

  Context Context first - issues I'm trying to resolve are below. One of our clients has asked as to quote how long it would take for us to improve one of our applications. This application currently provides basic user authentication in the form of username/password combinations. This client would like the ability for their employees to log-in using the details of whatever Windows User account is currently logged in at the time of running the application. It's not a deal-breaker if I tell them know - but the client might be willing to pay the costs of development to add this feature to the application. It's worth looking into. Based on my hunting around, it seems like storing the user login details against Domain\Username will be problematic if those details are changed. But Windows User SID's aren't supposed to change at all. I've got the impression that it would be best to record Windows Users by SID - feel free to relieve me of that if I'm wrong. I've been having a fiddle with some Windows API calls. From within C#, grabbing the current user's SID is easy enough. I can already take any user's SID and process it using LookupAccountSid to get username and domain for display purposes. For the interested, my code for this is at the end of this post. That's just the tip of the iceberg, however. The two issues below are completely outside my experience. Not only do I not know how to implement them - I don't even known how to find out how to implement them, or what the pitfalls are on various systems. Any help getting myself aimed in the right direction would be very much appreciated. Issue 1) Getting hold of the local user at runtime is meaningless if that user hasn't been granted access to the application. We will need to add a new section to our application's 'administrator console' for adding Windows Users (or groups) and assigning within-app permissions against those users. Something like an 'Add Windows User Login' button that will raise a pop-up window that will allow the user to search for available Windows User accounts on the network (not just the local machine) to be added to the list of available application logins. If there's already a component in .NET or Windows that I can shanghai into doing this for me, it would make me a very happy man. Issue 2) I also want to know how to take a given Windows User SID and check it against a given Windows User Group (probably taken from a database). I'm not sure how to get started with this one either, though I expect it to be easier than the issue above. For the Interested [STAThread] static void Main(string[] args) { MessageBox.Show(WindowsUserManager.GetAccountNameFromSID(WindowsIdentity.GetCurrent().User.Value)); MessageBox.Show(WindowsUserManager.GetAccountNameFromSID("S-1-5-21-57989841-842925246-1957994488-1003")); } public static class WindowsUserManager { public static string GetAccountNameFromSID(string SID) { try { StringBuilder name = new StringBuilder(); uint cchName = (uint)name.Capacity; StringBuilder referencedDomainName = new StringBuilder(); uint cchReferencedDomainName = (uint)referencedDomainName.Capacity; WindowsUserManager.SID_NAME_USE sidUse; int err = (int)ESystemError.ERROR_SUCCESS; if (!WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse)) { err = Marshal.GetLastWin32Error(); if (err == (int)ESystemError.ERROR_INSUFFICIENT_BUFFER) { name.EnsureCapacity((int)cchName); referencedDomainName.EnsureCapacity((int)cchReferencedDomainName); err = WindowsUserManager.LookupAccountSid(null, SID, name, ref cchName, referencedDomainName, ref cchReferencedDomainName, out sidUse) ? (int)ESystemError.ERROR_SUCCESS : Marshal.GetLastWin32Error(); } } if (err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("Could not retrieve acount name from SID. {0}", SystemExceptionManager.GetDescription(err))); return String.Format(@"{0}\{1}", referencedDomainName.ToString(), name.ToString()); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException("Could not retrieve acount name from SID", ex); } } private enum SID_NAME_USE { SidTypeUser = 1, SidTypeGroup, SidTypeDomain, SidTypeAlias, SidTypeWellKnownGroup, SidTypeDeletedAccount, SidTypeInvalid, SidTypeUnknown, SidTypeComputer } [DllImport("advapi32.dll", EntryPoint = "GetLengthSid", CharSet = CharSet.Auto)] private static extern int GetLengthSid(IntPtr pSID); [DllImport("advapi32.dll", SetLastError = true)] private static extern bool ConvertStringSidToSid( string StringSid, out IntPtr ptrSid); [DllImport("advapi32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern bool LookupAccountSid( string lpSystemName, [MarshalAs(UnmanagedType.LPArray)] byte[] Sid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse); private static bool LookupAccountSid( string lpSystemName, string stringSid, StringBuilder lpName, ref uint cchName, StringBuilder ReferencedDomainName, ref uint cchReferencedDomainName, out SID_NAME_USE peUse) { byte[] SID = null; IntPtr SID_ptr = IntPtr.Zero; try { WindowsUserManager.ConvertStringSidToSid(stringSid, out SID_ptr); int err = SID_ptr == IntPtr.Zero ? Marshal.GetLastWin32Error() : (int)ESystemError.ERROR_SUCCESS; if (SID_ptr == IntPtr.Zero || err != (int)ESystemError.ERROR_SUCCESS) throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}", stringSid, SystemExceptionManager.GetDescription(err))); int size = (int)GetLengthSid(SID_ptr); SID = new byte[size]; Marshal.Copy(SID_ptr, SID, 0, size); } catch (Exception ex) { if (ex is ApplicationException) throw ex; throw new ApplicationException(String.Format("'{0}' could not be converted to a SID byte array. {1}.", stringSid, ex.Message), ex); } finally { // Always want to release the SID_ptr (if it exists) to avoid memory leaks. if (SID_ptr != IntPtr.Zero) Marshal.FreeHGlobal(SID_ptr); } return WindowsUserManager.LookupAccountSid(lpSystemName, SID, lpName, ref cchName, ReferencedDomainName, ref cchReferencedDomainName, out peUse); } }

  Read the article

• Read XML Files using LINQ to XML and Extension Methods

  - by psheriff

  In previous blog posts I have discussed how to use XML files to store data in your applications. I showed you how to read those XML files from your project and get XML from a WCF service. One of the problems with reading XML files is when elements or attributes are missing. If you try to read that missing data, then a null value is returned. This can cause a problem if you are trying to load that data into an object and a null is read. This blog post will show you how to create extension methods to detect null values and return valid values to load into your object. The XML Data An XML data file called Product.xml is located in the \Xml folder of the Silverlight sample project for this blog post. This XML file contains several rows of product data that will be used in each of the samples for this post. Each row has 4 attributes; namely ProductId, ProductName, IntroductionDate and Price. <Products>  <Product ProductId="1"           ProductName="Haystack Code Generator for .NET"           IntroductionDate="07/01/2010"  Price="799" />  <Product ProductId="2"           ProductName="ASP.Net Jumpstart Samples"           IntroductionDate="05/24/2005"  Price="0" />  ...  ...</Products> The Product Class Just as you create an Entity class to map each column in a table to a property in a class, you should do the same for an XML file too. In this case you will create a Product class with properties for each of the attributes in each element of product data. The following code listing shows the Product class. public class Product : CommonBase{  public const string XmlFile = @"Xml/Product.xml";   private string _ProductName;  private int _ProductId;  private DateTime _IntroductionDate;  private decimal _Price;   public string ProductName  {    get { return _ProductName; }    set {      if (_ProductName != value) {        _ProductName = value;        RaisePropertyChanged("ProductName");      }    }  }   public int ProductId  {    get { return _ProductId; }    set {      if (_ProductId != value) {        _ProductId = value;        RaisePropertyChanged("ProductId");      }    }  }   public DateTime IntroductionDate  {    get { return _IntroductionDate; }    set {      if (_IntroductionDate != value) {        _IntroductionDate = value;        RaisePropertyChanged("IntroductionDate");      }    }  }   public decimal Price  {    get { return _Price; }    set {      if (_Price != value) {        _Price = value;        RaisePropertyChanged("Price");      }    }  }} NOTE: The CommonBase class that the Product class inherits from simply implements the INotifyPropertyChanged event in order to inform your XAML UI of any property changes. You can see this class in the sample you download for this blog post. Reading Data When using LINQ to XML you call the Load method of the XElement class to load the XML file. Once the XML file has been loaded, you write a LINQ query to iterate over the “Product” Descendants in the XML file. The “select” portion of the LINQ query creates a new Product object for each row in the XML file. You retrieve each attribute by passing each attribute name to the Attribute() method and retrieving the data from the “Value” property. The Value property will return a null if there is no data, or will return the string value of the attribute. The Convert class is used to convert the value retrieved into the appropriate data type required by the Product class. private void LoadProducts(){  XElement xElem = null;   try  {    xElem = XElement.Load(Product.XmlFile);     // The following will NOT work if you have missing attributes    var products =         from elem in xElem.Descendants("Product")        orderby elem.Attribute("ProductName").Value        select new Product        {          ProductId = Convert.ToInt32(            elem.Attribute("ProductId").Value),          ProductName = Convert.ToString(            elem.Attribute("ProductName").Value),          IntroductionDate = Convert.ToDateTime(            elem.Attribute("IntroductionDate").Value),          Price = Convert.ToDecimal(elem.Attribute("Price").Value)        };     lstData.DataContext = products;  }  catch (Exception ex)  {    MessageBox.Show(ex.Message);  }} This is where the problem comes in. If you have any missing attributes in any of the rows in the XML file, or if the data in the ProductId or IntroductionDate is not of the appropriate type, then this code will fail! The reason? There is no built-in check to ensure that the correct type of data is contained in the XML file. This is where extension methods can come in real handy. Using Extension Methods Instead of using the Convert class to perform type conversions as you just saw, create a set of extension methods attached to the XAttribute class. These extension methods will perform null-checking and ensure that a valid value is passed back instead of an exception being thrown if there is invalid data in your XML file. private void LoadProducts(){  var xElem = XElement.Load(Product.XmlFile);   var products =       from elem in xElem.Descendants("Product")      orderby elem.Attribute("ProductName").Value      select new Product      {        ProductId = elem.Attribute("ProductId").GetAsInteger(),        ProductName = elem.Attribute("ProductName").GetAsString(),        IntroductionDate =            elem.Attribute("IntroductionDate").GetAsDateTime(),        Price = elem.Attribute("Price").GetAsDecimal()      };   lstData.DataContext = products;} Writing Extension Methods To create an extension method you will create a class with any name you like. In the code listing below is a class named XmlExtensionMethods. This listing just shows a couple of the available methods such as GetAsString and GetAsInteger. These methods are just like any other method you would write except when you pass in the parameter you prefix the type with the keyword “this”. This lets the compiler know that it should add this method to the class specified in the parameter. public static class XmlExtensionMethods{  public static string GetAsString(this XAttribute attr)  {    string ret = string.Empty;     if (attr != null && !string.IsNullOrEmpty(attr.Value))    {      ret = attr.Value;    }     return ret;  }   public static int GetAsInteger(this XAttribute attr)  {    int ret = 0;    int value = 0;     if (attr != null && !string.IsNullOrEmpty(attr.Value))    {      if(int.TryParse(attr.Value, out value))        ret = value;    }     return ret;  }   ...  ...} Each of the methods in the XmlExtensionMethods class should inspect the XAttribute to ensure it is not null and that the value in the attribute is not null. If the value is null, then a default value will be returned such as an empty string or a 0 for a numeric value. Summary Extension methods are a great way to simplify your code and provide protection to ensure problems do not occur when reading data. You will probably want to create more extension methods to handle XElement objects as well for when you use element-based XML. Feel free to extend these extension methods to accept a parameter which would be the default value if a null value is detected, or any other parameters you wish. NOTE: You can download the complete sample code at my website. http://www.pdsa.com/downloads. Choose “Tips & Tricks”, then "Read XML Files using LINQ to XML and Extension Methods" from the drop-down. Good Luck with your Coding,Paul D. Sheriff  

  Read the article

• CodePlex Daily Summary for Tuesday, May 25, 2010

  CodePlex Daily Summary for Tuesday, May 25, 2010New ProjectsBibleNames: BibleNames BibleNames BibleNames BibleNames BibleNamesBing Search for PHP Developers: This is the Bing SDK for PHP, a toolkit that allows you to easily use Bing's API to fetch search results and use in your own application. The Bin...Fading Clock: Fading Clock is a normal clock that has the ability to fade in out. It's developed in C# as a Windows App in .net 2.0.Fuzzy string matching algorithm in C# and LINQ: Fuzzy matching strings. Find out how similar two string is, and find the best fuzzy matching string from a string table. Given a string (strA) and...HexTile editor: Testing hexagonal tile editorhgcheck12: hgcheck12Metaverse Router: Metaverse Router makes it easier for MIIS, ILM, FIM Sync engine administrators to manage multiple provisioning modules, turn on/off provisioning wi...MyVocabulary: Use MyVocabulary to structure and test the words you want to learn in a foreign language. This is a .net 3.5 windows forms application developed in...phpxw: Phpxw 是一个简易的PHP框架。以我自己的姓名命名的。 Phpxw is a simple PHP framework. Take my name named.Plop: Social networking wrappers and projects.PST Data Structure View Tool: PST Data Structure View Tool (PSTViewTool) is a tool supporting the PST file format documentation effort. It allows the user to browse the internal...PST File Format SDK: PST File Format SDK (pstsdk) is a cross platform header only C++ library for reading PST files.QWine: QWine is Queue Machine ApplicationSharePoint Cross Site Collection Security Trimmed Navigation: This SP2010 project will show security trimmed navigation that works across site collections. The project is written for SP2010, but can be easily ...SharePoint List Field Manager: The SharePoint List Field Manager allows users to manage the Boolean properties of a list such as Read Only, Hidden, Show in New Form etc... It sup...Silverlight Toolbar for DataGrid working with RIA Services or local data: DataGridToolbar contains two controls for Silverlight DataGrid designed for RIA Services and local data. It can be used to filter or remove a data,...SilverShader - Silverlight Pixel Shader Demos: SilverShader is an extensible Silverlight application that is used to demonstrate the effect of different pixel shaders. The shaders can be applied...SNCFT Gadget: Ce gadget permet de consulter les horaires des trains et de chercher des informations sur le site de la société nationale des chemins de fer tunisi...Software Transaction Memory: Software Transaction Memory for .NETStreamInsight Samples: This project contains sample code for StreamInsight, Microsoft's platform for complex event processing. The purpose of the samples is to provide a ...StyleAnalizer: A CSS parserSudoku (Multiplayer in RnD): Sudoku project was to practice on C# by making a desktop application using some algorithm Before this, I had worked on http://shaktisaran.tech.o...Tiplican: A small website built for the purpose of learning .Net 4 and MVC 2TPager: Mercurial pager with color support on Windowsunirca: UNIRCA projectWcfTrace: The WcfTrace is a easy way to collect information about WCF-service call order, processing time and etc. It's developed in C#.New ReleasesASP.NET TimePicker Control: 12 24 Hour Bug Fix: 12 24 Hour Bug FixASP.NET TimePicker Control: ASP.NET TimePicker Control: This release fixes a focus bug that manifests itself when switching focus between two different timepicker controls on the same page, and make chan...ASP.NET TimePicker Control: ASP.NET TimePicker Control - colon CSS Fix: Fixes ":" seperator placement issues being too hi and too low in IE and FireFox, respectively.ASP.NET TimePicker Control: Release fixes 24 Hour Mode Bug: Release fixes 24 Hour Mode BugBFBC2 PRoCon: PRoCon 0.5.1.1: Visit http://phogue.net/?p=604 for release notes.BFBC2 PRoCon: PRoCon 0.5.1.2: Release notes can be found at http://phogue.net/?p=604BFBC2 PRoCon: PRoCon 0.5.1.4: Ha.. choosing the "stable" option at the moment is a bit of a joke =\ Release notes at http://phogue.net/?p=604BFBC2 PRoCon: PRoCon 0.5.1.5: BWHAHAHA stable.. ha. Actually this ones looking pretty good now. http://phogue.net/?p=604Bojinx: Bojinx Core V4.5.14: Issues fixed in this release: Fixed an issue that caused referencePropertyName when used through a property configuration in the context to not wo...Bojinx: Bojinx Debugger V0.9B: Output trace and filtering that works with the Bojinx logger.CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1.5 and 4.0.1.5 beta3: Fixed fairly serious bug #13290 http://cassinidev.codeplex.com/WorkItem/View.aspx?WorkItemId=13290Content Rendering: Content Rendering API 1.0.0 Revision 46406: Initial releaseDeploy Workflow Manager: Deploy Workflow Manager Web Part v2: Recommend you test in your development environment first BEFORE using in production.dotSpatial: System.Spatial.Projections Zip May 24, 2010: Adds a new spherical projection.eComic: eComic 2010.0.0.2: Quick release to fix a couple of bugs found in the previous version. Version 2010.0.0.2 Fixed crash error when accessing the "Go To Page" dialog ...Exchange 2010 RBAC Editor (RBAC GUI) - updated on 5/24/2010: RBAC Editor 0.9.4.1: Some bugs fixed; support for unscopoedtoplevel (adding script is not working yet) Please use email address in About menu of the tool for any feedb...Facebook Graph Toolkit: Preview 1 Binaries: The first preview release of the toolkit. Not recommended for use in production, but enought to get started developing your app.Fading Clock: Clock.zip: Clock.zip is a zip file that contains the application Clock.exe.hgcheck12: Rel8082: Rel8082hgcheck12: scsc: scasMetaverse Router: Metaverse Router v1.0: Initial stable release (v.1.0.0.0) of Metaverse Router Working with: FIM 2010 Synchronization Engine ILM 2007 MIIS 2003MSTestGlider: MSTestGlider 1.5: What MSTestGlider 1.5.zip unzips to: http://i49.tinypic.com/2lcv4eg.png If you compile MSTestGlider from its source you will need to change the ou...MyVocabulary: Version 1.0: First releaseNLog - Advanced .NET Logging: Nightly Build 2010.05.24.001: Changes since the last build:2010-05-23 20:45:37 Jarek Kowalski fixed whitespace in NLog.wxs 2010-05-23 12:01:48 Jarek Kowalski BufferingTargetWra...NoteExpress User Tools (NEUT) - Do it by ourselves!: NoteExpress User Tools 2.0.0: 测试版本：NoteExpress 2.5.0.1154 +调整了Tab页的排列方式 注：2.0未做大的改动，仅仅是运行环境由原来的.net 3.5升级到4.0。openrs: Beta Release (Revision 1): This is the beta release of the openrs framework. Please make sure you submit issues in the issue tracker tab. As this is beta, extreme, flawless ...openrs: Revision 2: Revision 2 of the framework. Basic worker example as well as minor improvements on the auth packet.phpxw: Phpxw: Phpxw 1.0 phpxw 是一个简易的PHP框架。以我自己的姓名命名的。 Phpxw is a simple PHP framework. Take my name named. 支持基本的业务逻辑流程，功能模块化，实现了简易的模板技术，同时也可以支持外接模板引擎。 Support...sELedit: sELedit v1.1a: Fixed: clean file before overwriting Fixed: list57 will only created when eLC.Lists.length > 57sGSHOPedit: sGSHOPedit v1.0a: Fixed: bug with wrong item array re-size when adding items after deleting items Added: link to project page pwdatabase.com version is now selec...SharePoint Cross Site Collection Security Trimmed Navigation: Release 1.0.0.0: If you want just the .wsp, and start using this, you can grab it here. Just stsadm add/deploy to your website, and activate the feature as describ...Silverlight 4.0 Popup Menu: Context Menu for Silverlight 4.0 v1.24 Beta: - Updated the demo and added clipboard cut/copy and paste functionality. - Added delay on hover events for both parent and child menus. - Parent me...Silverlight Toolbar for DataGrid working with RIA Services or local data: DataGridToolBar Beta: For Silverlight 4.0sMAPtool: sMAPtool v0.7d (without Maps): Added: link to project pagesMODfix: sMODfix v1.0a: Added: Support for ECM v52 modelssNPCedit: sNPCedit v0.9a: browse source commits for all changes...SocialScapes: SocialScapes TwitterWidget 1.0.0: The SocialScapes TwitterWidget is a DotNetNuke Widget for displaying Twitter searches. This widget will be used to replace the twitter functionali...SQL Server 2005 and 2008 - Backup, Integrity Check and Index Optimization: 23 May 2010: This is the latest version of my solution for Backup, Integrity Check and Index Optimization in SQL Server 2005, SQL Server 2008 and SQL Server 200...sqwarea: Sqwarea 0.0.280.0 (alpha): This release brings a lot of improvements. We strongly recommend you to upgrade to this version.sTASKedit: sTASKedit v0.7c: Minor Changes in GUI & BehaviourSudoku (Multiplayer in RnD): Sudoku (Multiplayer in RnD) 1.0.0.0 source: Sudoku project was to practice on C# by making a desktop application using some algorithm Idea: The basic idea of algorithm is from http://www.ac...Sudoku (Multiplayer in RnD): Sudoku (Multiplayer in RnD) 1.0.0.1 source: Worked on user-interface, would improve it Sudoku project was to practice on C# by making a desktop application using some algorithm Idea: The b...TFS WorkItem Watcher: TFS WorkItem Watcher Version 1.0: This version contains the following new features: Added support to autodetect whether to start as a service or to start in console mode. The "-c" ...TfsPolicyPack: TfsPolicyPack 0.1: This is the first release of the TfsPolicyPack. This release includes the following policies: CustomRegexPathPolicythinktecture Starter STS (Community Edition): StarterSTS v1.1 CTP: Added ActAs / identity delegation support.TPager: TPager-20100524: TPager 2010-05-24 releaseTrance Layer: TranceLayer Transformer: Transformer is a Beta version 2, morphing from "Digger" to "Transformer" release cycle. It is intended to be used as a demonstration of muscles wh...TweetSharp: TweetSharp v1.0.0.0: Changes in v1.0.0Added 100% public code comments Bug fixes based on feedback from the Release Candidate Changes to handle Twitter schema additi...VCC: Latest build, v2.1.30524.0: Automatic drop of latest buildWCF Client Generator: Version 0.9.2.33468: Version 0.9.2.33468 Fixed: Nested enum types names are not handled correctly. Can't close Visual Studio if generated files are open when the code...Word 2007 Redaction Tool: Version 1.2: A minor update to the Word 2007 Redaction Tool. This version can be installed directly over any existing version. Updates to Version 1.2Fixed bugs:...xPollinate - Windows Live Writer Cross Post Plugin: 1.0.0.5 for WLW 14.0.8117.416: This version works with WLW 14.0.8117.416. This release includes a fix to enable publishing posts that have been opened directly from a blog, but ...Yet another developer blog - Examples: jQuery Autocomplete in ASP.NET MVC: This sample application shows how to use jQuery Autocomplete plugin in ASP.NET MVC. This application is accompanied by the following entry on Yet a...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrpatterns & practices: Windows Azure Security GuidanceSqlServerExtensionsGMap.NET - Great Maps for Windows Forms & PresentationMono.AddinsCaliburn: An Application Framework for WPF and SilverlightBlogEngine.NETIonics Isapi Rewrite FilterSQL Server PowerShell Extensions

  Read the article

< Previous Page | 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032  | Next Page >