Search Results

Search found 4091 results on 164 pages for 'intel celeron'.

Page 112/164 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• Wake on Lan/Wan won't work after some time has passsed

  - by Vian Esterhuizen

  I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

  Read the article

• Could it be sane to use Windows Server 2012 as desktop

  - by nCdy

  what about using it on desktop? I've got enough strong PC with intel core i7 and 8GB Ram so what should I think about: why not? Were looking about major differences compared to windows 8, found less. for example new file system - can it affect me? In my usual day I need development instruments alike visual studio, virtualization tools, and some games So far I can't find something that must stop me, everything I need can work (seems like) there. Tell me why I must not do it or if that is sane to do.

  Read the article

• Will this increase my VPS failing rate ?

  - by Spencer Lim

  Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange install Team foundation server on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler for this about one VPS can only install what what what service ? Thx for reply

  Read the article

• Supermicro SmartOS setup issue with HDDs

  - by Andrew B.

  I'm trying to setup SmartOS on my new Supermicro server (SYS-6027R-N3RF4+). I have 8 HDDs + 2 SSDs installed in the hot-swappable drive bays. I have not configured the Intel RAID controller on the machine (it shows no RAID configured, and lists all 8 HDDs). When I boot SmartOS from my USB key for the first time and get to the initial zpool creation I only see 2 disks listed. How can I tell which two drives are being referenced? How can I get SmartOS to recognize all 8+2 drives? Is there a BIOS setting I need to adjust?

  Read the article

• Enable Hardware Virtualization on HP CompaqDX2420?

  - by 7alwagy

  Hey Guys, After installing vmware7, I tried to run a virtual machine with Mac OSX installed. When I tried to run this virtual machine I got an error message saying: Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization. I'v googled and found out that my processor (Intel Core 2 Duo E7500 Processor (2.93 GHz, 3 MB L2 cache, 1066 Mhz FSB)supports Hardware virtualization. Does anyone know how to enable this in order to get this virtual machine running?

  Read the article

• What is the correct term for the number of bits used by an operating system

  - by benc

  Recently, some discussions came up about 32 bit vs. 64 bit implementations of operating systems. While I was composing a message about this topic, I realized that I did not know if there was a correct term for the number of bits supported by an operating system. For example, various versions of Solaris and Linux have 32bit and 64bit releases. Is the distinction "architecture"? In my experience, that has referred to chip types (Intel vs. PPC). Is it a "release"? Typically, I think of a release as a version number a consistent feature set, that might run on different architectures. Maybe it is just "architecture", after all, even though a chip family might have used several different bit sizes over time, the chips themselves are different when you jump from 32bit to 64bit.

  Read the article

• Computer not displaying anything

  - by Justen

  The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

  Read the article

• Why is cpu power management not working in Server 2012 with Hyper-V?

  - by Roland

  We've been using Server2008R2 with Hyper-V for a couple of years now and chose it at the time because of its ability to make use of Intel SpeedStep and AMD PowerNow! Now with Server 2012 and Hyper-V V3, all power management abilities seem to be gone. The CPUs are always at full speed and our servers need twice the energy as before while idling. (Yes, the CPU P-states are enabled in the BIOS) Is this by design? Is there a workaround to enable cpu power management again? Despite the great new features of Hyper-V 3, this would be a show-stopper for us since we are very concerned about energy consumption.

  Read the article

• How to get Atheros ar242x wireless adapter working under Debian Linux?

  - by Mark

  Does anybody know how to get the Atheros ar242x wireless adapter working under Debian Linux (5.0.2 and/or 5.0.3)? My Debian live CDs and install CDs both don't like this card at all. Curisouly, it seems to work on other, Debian-based, Linuxes. Is this a free/non-free Driver issue? I know Debian gets mardy about that. Although for what it's worth, the Live CD doesn't seem to detect my wired LAN connection either... Specifically this is on a Samsung R610 laptop (some version of which seem to have an intel wireless adapter - this one definitely doesn't!) I've tried all sorts of things but obviously on a live CD installing software is limited. I've also tinkerering with network config files and kernel modules etc but to no avail.

  Read the article

• Secondary Monitor won't Display at Full Resolution with Primary Display Disconnected

  - by Laramie

  I have had a bad day. Among today's events, the LCD display on my Dell E6500 notebook failed. It had been working with a secondary monitor connected through a VGA cable at 1600x900 resolution until I removed the LCD from my notebook for repair. Now the max resolution available on the secondary display is 1024x768. If I reconnect the burned out primary display, the secondary monitor is again available at 1600x900. The video card is an onboard Mobil Intel 4. How can I maintain the secondary display at 1600x900 with the primary display disconnected (for repair)? Edit: I just noticed that when Windows boots, it displays at the correct resolution and I can see my desktop in all its glory for a couple seconds then reverts to 1024x768.

  Read the article

• Should I upgrade Exchange 2003 or just upgrade the hardware?

  - by JohnyD

  My organization currently has a 4 y/o Exchange 2003 email server (32-bit, Intel Pentium D @ 3GHz, 3GB RAM). It's run very well over the past 4 years but it is time to upgrade its hardware. This server would handle email for approximately 30 clients, a few OWA users with iPhones. My (somewhat ambiguous) question is, when I receive the new hardware should I build out a new Exchange 2003 deployment or should I look at Exchange 2007 / 2010? I've heard that Exchange 2010 requires Sharepoint 2010 (which I am currently not running). Are there benefits that a small-medium sized business can or can't do without? Am I making a horrible mistake staying with antiquated software? Other details: Exchange 2003 (v6.5 + SP2) single front-end server All opinions and thoughts are very much appreciated.

  Read the article

• Computer Randomly Restarts (no crash dump)

  - by Bruno Charters

  Hey everyone this is my first time here, so, my computer got pulled out of his place the other day by accident and it never got back to working decently ever again. I just stopped using it because everytime i power it on, it restarts. Some times it doesn't even reach the desktop, others it even allows me to run a game or something. It gets really random. Today i was trying my last attempt before sending it to fix and it ran fine for 40 minutes but as i tried to run a game the screen got really messeud up full of colorful lines and stuff and i'm assuming it had to do with the graphics card. Altho, my question is, what can be causing all this restart thingie? Can it be just the Power Supply failing me and hence, not giving enough power to make the graphic card go for instance? My computer specs are: Motherboard: Asus P5KPL - AM CPU: Intel QuadCore 2.33 ghz Graphic Card: Nvidia GeForce GTS260 Ram: 2x2gb ddr2 Power Supply: Nox Urano 500W Thanks in advance, Bruno Charters

  Read the article

• How can I access the external microphone with Ubuntu?

  - by Charles Merriam

  Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

  Read the article

• Blue Screen at booting Windows 2000 virtual

  - by darkdog

  well i hope this stackexchange site is the right for my issue. I've an Oracle VirtualBox running on some acer pc Settings for the Acer PC: Windows 7 SP1 64bit Intel G630 @ 2.7Ghz 2GB RAM i used a .vhd image which contains a windows 2000 system with some preconfigured stuff and software for a customer. At the Windows boot time immediately after the "Loading Windows 2000..." - Screen i get the following Error: Sorry for the German Text but it say's something like "Check the Size of your HDD. If the error contains a driver, deactivate it and try again. Or change the graficcard" The HDD Size shouldn't be a problem in my honest opinion. Can anyone give me an adivce what i can try to do? I just tested the same combination of the .vhd image and oracle virtualbox on another computer. Same issue. Greetings

  Read the article

• I just ordered 70/10 line, and need a new router I think?

  - by data_jepp

  Before I had the 25/5 line and the n standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2,5 and 5ghz? Can my laptop be connected at once over both bandwidths? And that would let me use the full 70Mb over wifi? Hope it's ok to ask network questions here.

  Read the article

• Why does the EFI shell not detect my Windows DVD?

  - by Oliver Salzburg

  I'm currently looking into (U)EFI for the first time and am already really confused. I insert the Windows Server 2008 R2 Enterprise disc into the DVD-ROM and boot into the EFI shell. The shell will automatically list all detected devices, which are: blk0 :CDRom - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master)/CDROM(Entry0) blk1 :BlockDevice - Alias (null) Acpi(PNP0A03,0)/Pci(1F|2)/Ata(Primary,Master) To my understanding, it should have already detected the filesystem on blk0 and should have mounted it as fs0. Why is that not happening? If I insert a USB drive, it gets mounted just fine. The board is an Intel S5520HC in case that makes a difference.

  Read the article

• How to discern video details from Linux Live CD

  - by Chris Lieb

  I was having trouble getting X.Org to work with the video card in a recently aquired laptop, so I decided to try to probe around the configuration of a Linux Live CD to figure out how to set up my kernel. I chose the Sabayon 5.0 Live DVD because it was the only one that I could find that was the same or newer than the 2.6.32 kernel I have installed on the laptop right now. Of course, the DVD booted right into GNOME without issue, unlike the hangs and crashes that I had been getting. So, I want to figure out what kernel driver this Live DVD is currently using, but I don't know how to. hwinfo doesn't shed any light on the matter, and lspci -vnn doesn't list a driver for my video device, though both methods correctly identify that I have an Intel 855GM video processor. How can I find out this information?

  Read the article

• How does the build quality of laptops compare?

  - by pgwillia

  I'm looking to replace my 5 year old laptop. I want my next laptop to endure at least this long. I typically have Thunderbird, Firefox, Eclipse Java IDE, Skype, a ssh session, and Apache Tomcat running. I'm currently running Karmic Ubuntu, but am agnostic about operating system and would move to Win 7 or OS X. I frequently travel with this computer. I also value battery longevity and power conservation (if possible). Above all I'm looking to minimize cost. I think the hardware that best meets my needs is an Intel i7 processor, 8 GB RAM, 100GB @7200 rpm or SSD hardrive, and about 15 inch monitor. These specs are met by most brands. Does anyone know specific pros/cons and build quality for Macbook Pro, Lenovo Thinkpad (W510 or T510), Sony's VPC-F1190, and ASUS G Series G73JH-X1 NoteBook? Are all i7 processors created equal? Do you have other suggestion that meet my needs?

  Read the article

• Scaling up an apache server

  - by pehrs

  I have an Ubuntu server running apache2 which i expect to be hit by around 500-1000 (concurent) users for a limited amount of time. The server serves a mixture of custom (rather light) php pages connected to a postgresql db (around 20 Mb in size) and static content. The hardware is stable and pretty beefy: Intel Xeon E5420 @ 2.5 GHz 12 GB RAM During previous rushes on this server I have increased ServerLimit, the MaxClients for the MPM modules and decreased Timeout and KeepAliveTimeout. It has worked, but been sluggish and I have a feeling more can be done. How would you suggest configuring the Apache server to handle this kind of load?

  Read the article

• Can't get any SMART or temperature data from HDDs

  - by Regs

  I have a PC with recently installed Gigabyte GA-X79-UD5 MB. I've encountered some weird problem with getting SMART data or temperature for HDDs. Every single tool I've tried in Windows 7 just can't get any data (HDTune, AIDA64...). I was suspecting that SMART feature is disabled in BIOS but it's seems like there is no such option in BIOS settings. I've even tried to update BIOS but still no luck. Same issue with both controllers on that MB (Intel and Marvell). It seems unlikely that both controllers end up with exact same issue. Both controllers are working in AHCI mode. Is there anythig that can interfere with getting SMART ant temp data from HDDs? Or is there any way to check that it's actuall MB issue? Is it even possible that it is hardware issue since all HDDs seems to work normal despite the fact that I can't get any temperature or SMART data from it.

  Read the article

• 32bit Application Memory Usage on 64bit Windows 7

  - by Brian

  I have an early 2012 Macbook Pro with and Intel I7 processor and 16 gigs RAM running Windows 7 Professional 64bit via Bootcamp. I work in Geographical Information Systems as a programmer so most of the applications I am running are 32bit Applications, but tend to use a lot of resources (i.e. ArcGIS, SQL Server Express, Visual Studio, etc.). I have been noticing that when I have multiple instances of either the same 32bit application or different 32bit applications and they are all working on hefty processing tasks, I am still only topping out at about 30% memory use. I understand 32bit applications are limited to less than 4gb RAM, but I assumed that one instance could use its own 4gb while another instance could use another 4gb to take full advantage of all the memory I have installed. Can anyone explain how this works and how I can get my applications to take advantage of all my memory via running multiple instances?

  Read the article

• Nginx proxy to s3 bucket gets 400 Invalid Argument

  - by elssar

  I have a Django app in which I serve media files through an nginx proxy to s3. The relevant python code response = HttpResponse() response['X-Accel-Redirect'] = '/s3_redirect/%s' % filefield.url.replace('http://', '') response['Content-Disposition'] = 'attachment; filename=%s' % filefield.name return response The nginx block for the internal redirect is location ~* ^/s3_redirect/(.*) { internal; set $full_url http://$1; proxy_pass $full_url; And the request logged by s3 is. REST.GET.OBJECT <media file> "GET <media file>" 400 InvalidArgument 354 - 4 - "http://<referer>" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_3) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.89 Safari/537.1" - I, for the life of me, can't figure out what's wrong. The url send to nginx by the app is valid, it works in the browser. And nginx is sending a request to s3.

  Read the article

• Virtualizing OpenSolaris with physical disks

  - by Fionna Davids

  I currently have a OpenSolaris installation with a ~1Tb RaidZ volume made up of 3 500Gb hard drives. This is on commodity hardware (ASUS NVIDIA based board on Intel Core 2). I'm wondering whether anyone knows if XenServer or Oracle VM can be used to install 2009.06 and get given physical access to the three SATA drives so that I can continue to use the zpool and be able to use the Xen bits for other areas. I'm thinking of installing the JeOS version of OpenSolaris, have it manage just my ZFS volume and some other stuff for work(4GB), then have a Windows(2GB) and Linux(1GB) VM (theres 8Gb RAM on that box) virtualised for testing things. Currently I am using VirtualBox installed on OpenSolaris for the Windows and Linux testing but wondered if the above was a better alternative. Essentially, 3 Disks - OpenSolaris Guest VM, it loads the zpool and offers it to the other VMs via CIFS.

  Read the article

• Computer won't start unless power is removed for ~5 minutes

  - by Paul Tarjan

  I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

  Read the article

• Simple queries occasionally running very slowly

  - by Johan

  I have some very simple queries that occasionally run very slowly. The table viewed_sites has about 10 - 20 rows. Running EXPLAIN ANALYZE always gives a runtime of less than 3 milliseconds. When the query is run automatically (every 10 seconds) it occasionally takes over a second to run. The query: INSERT INTO ga.viewed_sites (site_id) VALUES ('gop2') The table: CREATE TABLE viewed_sites ( site_id character varying(4) NOT NULL, last_viewed timestamp with time zone DEFAULT now() NOT NULL ); The (occasional) log result: 2010-05-24 15:47:55 UTC LOG: duration: 1044.632 ms statement: INSERT INTO ga.viewed_sites (site_id) VALUES ('gop2') It's a horribly vague question, but what could be causing this? I suppose it comes down to CPU, RAM, HDD or some combination of the above. Postgresql 8.3, Ubuntu 8.04 Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz 2 GiB RAM

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >