Search Results

Search found 5662 results on 227 pages for 'processor socket'.

Page 138/227 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Disable Memory Modules In BIOS for Testing Purposes (Optimize Nehalem/Gulftown Memory Performance)

  - by Bob

  I recently acquired an HP Z800 with two Intel Xeon X5650 (Gulftown) 6 core processors. The person that configured the system chose 16GB (8 x 2GB DDR3-1333). I'm assuming this person was unaware these processors have 3 memory channels and to optimize memory performance one should choose memory in multiples of three. Based on this information, I have a question: By entering the BIOS, can I disable the bank on each processor that has the single memory module? If so, will this have any adverse effects or behave differently than physically removing the modules? I ask due to the fact that I prefer to store the extra memory in the system if it truly behaves as if the memory is not even there. Also, I see this as an opportunity to test 12GB vs. 16GB to see if there is a noticeable difference. Note: According to http://www.delltechcenter.com/page/04-08-2009+-+Nehalem+and+Memory+Configurations?t=anon, the current configuration reduces the overall data transfer speed to 1066 and in addition, the memory bandwidth goes down by about 23%.

  Read the article

• how to i lock a Harddrive to a certain drive letter

  - by Memor-X

  i have an external hard drive that i have set to Drive F which on it contains some programs that i have shortcuts on the desktop how i have a second external hard drive which i store my music on which is auto assigned to Drive E, due to someone thinking that Australians love to have f** wings on power plugs for hard drives while power boards have each socket close together i can have both of these hard drives set at the same time my music hard drive i normally only plug up when i sync music to my ipod but on occasion when i unplug my music hard drive and plug my old one back in or at times when i turn on my computer with the music hard drive in, turn off my computer and turn it back on with my old hard drive it's drive letter gets switched to E i get annoyed having to always go into disk management and change the drive letter back to F when this happens so i am wondering if I can lock my hard drive to always be F, if anything else tries to be F it can fail for all i care If there is a batch file i can use that'll go though all the steps of Disk Management to change a drive's letter, that way i can set it up in the startup folder

  Read the article

• Windows DNS Server 2008 R2 fallaciously returns SERVFAIL

  - by Easter Sunshine

  I have a Windows 2008 R2 domain controller which is also a DNS server. When resolving certain TLDs, it returns a SERVFAIL: $ dig bogus. ; <<>> DiG 9.8.1 <<>> bogus. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31919 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A I get the same result for a real TLD like com. when querying the DC as shown above. Compare to a BIND server that is working as expected: $ dig bogus. @128.59.59.70 ; <<>> DiG 9.8.1 <<>> bogus. @128.59.59.70 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 30141 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;bogus. IN A ;; AUTHORITY SECTION: . 10800 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2012012501 1800 900 604800 86400 ;; Query time: 18 msec ;; SERVER: 128.59.59.70#53(128.59.59.70) ;; WHEN: Wed Jan 25 14:09:14 2012 ;; MSG SIZE rcvd: 98 Similarly, when I query my Windows DNS server with dig . any, I get a SERVFAIL but the BIND servers return the root zone as expected. This sounds similar to the issue described in http://support.microsoft.com/kb/968372 except I am using two forwarders (128.59.59.70 from above as well as 128.59.62.10) and falling back to root hints so the preconditions to expose the issue are not the same. Nevertheless, I also applied the MaxCacheTTL registry fix as described and restarted DNS and the whole server as well but the problem persists. The problem occurs on all domain controllers in this domain and has occurred since half a year ago, even though the servers are getting automatic Windows updates. EDIT Here is a debug log. The client is 160.39.114.110, which is my workstation. 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Rcv 160.39.114.110 2e94 Q [0001 D NOERROR] A (5)bogus(0) UDP question info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x0100 QR 0 (QUESTION) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 0 Z 0 CD 0 AD 0 RCODE 0 (NOERROR) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty 1/25/2012 2:16:01 PM 0E08 PACKET 000000001EA6BFD0 UDP Snd 160.39.114.110 2e94 R Q [8281 DR SERVFAIL] A (5)bogus(0) UDP response info at 000000001EA6BFD0 Socket = 508 Remote addr 160.39.114.110, port 49710 Time Query=1077016, Queued=0, Expire=0 Buf length = 0x0fa0 (4000) Msg length = 0x0017 (23) Message: XID 0x2e94 Flags 0x8182 QR 1 (RESPONSE) OPCODE 0 (QUERY) AA 0 TC 0 RD 1 RA 1 Z 0 CD 0 AD 0 RCODE 2 (SERVFAIL) QCOUNT 1 ACOUNT 0 NSCOUNT 0 ARCOUNT 0 QUESTION SECTION: Offset = 0x000c, RR count = 0 Name "(5)bogus(0)" QTYPE A (1) QCLASS 1 ANSWER SECTION: empty AUTHORITY SECTION: empty ADDITIONAL SECTION: empty Every option in the debug log box was checked except "filter by IP". By contrast, when I query, say, accounts.google.com, I can see the DNS server go out to its forwarder (128.59.59.70, for example). In this case, I didn't see any packets going out from my DNS server even though bogus. was not in the cache (the debug log was already running and this is the first time I queried this server for bogus. or any TLD). It just returned SERVFAIL without consulting any other DNS server, as in the Microsoft KB article linked above.

  Read the article

• Anyone know of a good way to sell used servers?

  - by RandyMorris

  We have a couple of servers we no longer need now that we are fully hosted on a managed host (rackspace). They were purchased for over $10,000 each but we realize that over time their monetary value drops. Anyone have suggestions or experience selling these in a proper way? They are dual xeon processor 2U rack mountable with 4+GB RAM, intel boards, 6x 72GB 15,000 RPM SCSI Drives with raid controller redundant power supply. We are in Southern California area. I can be more specific on any information if there is interest. I know there is ebay and the like but these servers are like the family dog that has to be given up and we are looking for a proper home for a fair price. I will end up auctioning it off if need be in the end though. Thanks in advanced for any help!

  Read the article

• RHEL 4.8 / Sybase 12.5.4 64 bit install error - I have libaio i368 installed I need libaio x86_64 in

  - by Jon

  I am trying to install Sybase ASE 12.5.4 64 bit. I know the machine has a 64 bit processor It is giving me an error during install saying: "error while loading shared libraries: libaio.s0.1" I run the command: rpm -q --qf '%{NAME}-%{VERSION}-%{RELEASE} (%{ARCH})\n' libaio Which returns: libaio-0.3.105-2 (i386) I found a src rpm for libaio-0.3.102. I followed the steps to install which included using make. It appeared to install without error. But when I run the rpm -q command again I still only see the i386 version installed. Not really sure where to go from here. Ideally I would like to find a regular rpm of libaio x86_64 for RHEL 4.8. If I were to find one would I upgrade the package that is already there? Would I remove and install the new one. Or would I install and two separate version of the library?

  Read the article

• Is 850W SMPS enough for the below Config?

  - by bali208

  We are planing to assemble a file server of the following configuration. 1) Intel S2400SC2 Motherboard. 2) Xeon 2407 Processor x 2 (Dual Processors) 3) 8gb x 8 ECC DDR3 RAM 4) One 2 TB Seagate HDD. 5) 8 cabinet fans fitted for NZXT Switch 810 Cabinet. Our question is is CoolerMaster 850 Watts power supply enough for our machine? Or we have to put 1050 Watts power Supply? Please suggest the best Brand and Wattage of SMPS we have to buy for our system. Thank you.

  Read the article

• Port binding conflicts with "switch user" on Windows 7

  - by C-dizzle

  We are using the switch user function within Windows 7 under an active directory network. We have one application in particular that gives us an error: Only one usage of each socket address (protocol/network address/port) is normally permitted. bind Port 10001 Are there any other ports that can only be used at one time that might have an adverse effect on the other user? We try to mentor our users to use the log off function instead of switch user, but that doesn't always happen. As an alternative, is it possible to disable the 'switch user' button on our machines?

  Read the article

• Computer won't recognize second WD internal HD

  - by music man

  I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

  Read the article

• PSU Suggestions for SLI EVGA GTX 680 + i7

  - by JMH

  So i am putting together a new machine and am trying to determine the best PSU to go with for this setup. Here is the build i am thinking about Processor Intel Core i7-3770K Ivy Bridge 3.5GHz Motherboard ASRock Z77 Professional Graphics Card (2 SLI) EVGA 02G-P4-2680-KR Sound Card HT | OMEGA eClaro 7.1 Fan/Heat Sync ZALMAN CNPS9500A-LED Case COOLER MASTER HAF X RC-942-KKN1 RAM G.SKILL Ripjaws X Series 32GB (4 x 8GB) SSD Of some Sort So my guess is that i need a 750 -1000W PSU, but which brand.... how much, etc --- really in the woods. Thanks -Josh

  Read the article

• LVS TCP connection timeouts - lingering connections

  - by Jon Topper

  I'm using keepalived to load-balance connections between a number of TCP servers. I don't expect it matters, but the service in this case is rabbitmq. I'm using NAT type balancing with weighted round-robin. A client connects to the server thus: [client]-----------[lvs]------------[real server] a b If a client connects to the LVS and remains idle, sending nothing on the socket, this eventually times out, according to timeouts set using ipvsadm --set. At this point, the connection marked 'a' above correctly disappears from the output of netstat -anp on the client, and from the output of ipvsadm -L -n -c on the lvs box. Connection 'b', however, remains ESTABLISHED according to netstat -anp on the real server box. Why is this? Can I force lvs to properly reset the connection to the real server?

  Read the article

• What causes winsock 10055 errors? How should I troubleshoot?

  - by Tom Kerr

  I'm investigating some issues with winsock 10055 errors on a chain of custom applications (some of which we control, some not) and was hoping to get some advice on techniques to troubleshoot the problem. No buffer space available. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. From research, non-paged pool and ports seem to be the only resources which can cause this error. Is there another resource which might cause 10055 errors? Currently, we have perfmon counters setup on the applications and non-paged pool usage looks low in most circumstances. Open TCP connections looks low and I am unaware of another way to monitor ports. Since it only happens in production, we are unable to use more invasive counters. Is there some other tool or procedure you would recommend to diagnose which application is causing the issue?

  Read the article

• Virtualbox 4 hangs when trying to install ubuntu guest on ubuntu host system

  - by misterjinx

  I'm trying to install ubuntu server using virtualbox 4.0.4 in a ubuntu 10.10 host OS. I have the iso image on my hard drive which I used to perform the install. I edited the settings and added this image at the storage section, selected it as a primary master, so I could boot from it and start the install process. But now, each time I start the installation, at the very beginning or if I'm lucky, after I click on the install link at the welcome screen, the process hangs and all the computer is blocked. This happened 3 times already. I even tried to perform the installation using an old CD I had with the 9.10 server version, thinking that the iso image might be the issue, but the problem still persists. I dont know what could cause this problem. My computer is a dell laptop with AMD processor (I dont know if this is important). Any help is very appreciated.

  Read the article

• Webserver: chrooted PHP gives mysql.sock error when attempting to reach mysql

  - by Jon L.

  Hey guys, I've configured an Ubuntu webserver with Nginx + PHP5-FPM. I've created a chrooted environment (using jailkit) that I'm tossing my developers into, from where they can develop their test applications. Chroot jail: /home/jail Nginx and PHP5-FPM run outside the chroot, but are configured to function with websites within the chrooted environment. So far, Nginx and PHP5-FPM are serving up files without issue, except for the following: When attempting to connect to MySQL, we receive this error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' Now, I believe the issue is due to the non-chrooted php.ini referencing mysqld.sock outside of the chroot environment (it's actually using the MySQL default setting currently). My question is, how can I configure PHP to access MySQL via loopback or similar? (Found that as a suggestion in a google result, but without any instructions) Or if I'm missing some other obvious setting, let me know. If there's an option of creating a hardlink (that would remain available even if mysql is restarted), that would be handy as well.

  Read the article

• Hyper-Threading and Dual-Core, What's the Difference?

  - by Josh Stodola

  In a conversation with the network administator, I mentioned that my machine was a dual-core. He told me it was not. I brought up the task manager, went to the perfomance tab, and showed him that there are two separate CPU usage graphs. I have a quad-core machine at home and it has four graphs. He told there were two graphs on this particular machine because of hyper-threading. I used to have a hyper-thread pentium 4 processor back in the day, but I never fully understood what it meant. So what is the difference between hyper threading and dual-core? And how do you tell which one you have?

  Read the article

• mysql settings - using the available resources

  - by Christian Payne

  I've got a lot of processing work I need to run on a mysql server. I've installed mysql 5.1.45-community on a Win 2007 64bit. Its running on a xenon, 3ghz 6 processors with 8 gig ram. It doesn't seem to matter what queries I run (or the number I run at the same time), when I look in task manager, I'll see one processor is out at 100%. The other 5 are idol. Memory is static at 1.54 gig. When I installed mysql, I used the wizard and selected the default "server" (not workstation) option. I feel like I should be getting more bang for my buck. Is there something else I should be monitoring or something I should change to use the other system resources???

  Read the article

• Macbook Pro 2.66 GHz vs. 2.8 GHz

  - by nevan

  Is there much advantage in getting the higher end Macbook Pro compared to the mid-range one? The differences between the two are: 2.66 GHz vs. 2.8 GHz 256 MB graphics memory vs. 512 MB 3 MB L2 cache vs. 6 MB 320 GB hard drive vs. 500 GB $2000 vs. $2300 I've looked around, but I can't find any direct comparisons for the two machines. I'd be using the machine for development. I generally use a computer for 3 years. I don't really play games, but do use Photoshop regularly. I've heard that once Snow Leopard arrives, the graphics chip will be used to boost the main processor, so I was wondering if getting the one with more graphics memory would be an advantage?

  Read the article

• SQL Performance Problem IA64

  - by Vendoran

  We’ve got a performance problem in production. QA and DEV environments are 2 instances on the same physical server: Windows 2003 Enterprise SP2, 32 GB RAM, 1 Quad 3.5 GHz Intel Xeon X5270 (4 cores x64), SQL 2005 SP3 (9.0.4262), SAN Drives Prod: Windows 2003 Datacenter SP2, 64 GB RAM, 4 Dual Core 1.6 GHz Intel Family 80000002, Model 6 Itanium (8 cores IA64), SQL 2005 SP3 (9.0.4262), SAN Drives, Veritas Cluster I am seeing excessive Signal Wait Percentages ( 250%) and Page Reads /s (50) and Page Writes /s (25) are both high occasionally. I did test this query on both QA and PROD and it has the same execution plan and even the same stats: SELECT top 40000000 * INTO dbo.tmp_tbl FROM dbo.tbl GO Scan count 1, logical reads 429564, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. As you can see it’s just logical reads, however: QA: 0:48 Prod: 2:18 So It seems like a processor related issue, however I’m not sure where to go next, any ideas? Thanks, Aaron

  Read the article

• nginx + php-fpm “504 Gateway Time-out” after compiling with curl support

  - by Brian

  We recently switched to managing php with php-fpm. It was working great, but is now giving me issues. The most recent change was to install libcurl-devel and re-compile php (5.3.3) using --with-curl. Now I'm getting 504 timeouts with nginx and the pages won't load. HTML pages load fine, phpinfo() loads as well. Tried backing out the changes and re-compiling without curl support, but still not having any luck. Also tried adjusting request_terminate_timeout per some of the other posts here on SF without change. This is on a test machine that has no other clients hitting it. I also tried switching to unix socket instead of tcp--same result. What am I missing here? Am I barking up the wrong tree with curl?

  Read the article

• Does my motherboard support dual-core processors?

  - by Filip

  Hi there! I'm very confused about my motherboard (ConRoe945PL-GLAN) It's manual says, that i can use only some kind of ConRoe processors. But some pages on internet says that i can plug in almost everything. For ex.: aria.co.uk says that i can plug in even Core 2 Duo. It would be awesome if i would not have to buy new motherboard! Anyway, if my motherboard will not let me to plug in Core 2 Duo, should i buy Pentium 4 (very cheap) with 3,2 GHz and insanely overclock it to have some performance or buy new motherboard + new processor for big money? THX for any answers! =)

  Read the article

• debian mysql server always down

  - by lokheart

  I am hosting a mysql server in a debian 6.0.4 server hosted in linode, the new data is frequently written into the mysql server using R, about 30-40 "write" per minute, about 7 hours a day, 5 days a week. Recently I found that the mysql server seem to down frequently, always give me error that mysql server cannot be connected through socket. I wonder if this is caused by my high demand to my mysql server, and if this can be solved. I am definitely a newbie in manage server. Please let me know if I need to provide additional information for this question in order to get it solved. Thanks.

  Read the article

• Installing 64-bit Ubuntu alongside 32-bit Ubuntu?

  - by Macha

  I have a 64-bit processor in my PC, but because of worries over application compatibility, up until now I have been using 32-bit Ubuntu (and 32-bit Vista because Dell wouldn't sell me 64-bit with my PC). Is it possible for me to install 64-bit Ubuntu alongside 32-bit ubuntu and 32-bit Windows Vista, so I can choose between them at boot and share data, and without uninstalling my 32-bit Ubuntu? My partitions are as follows Drive 1: 10 GB Vista recovery partition (E:), 240 GB Windows NTFS parition (230 GB used, C:). Drive 2: 167 GB Windows NTFS Partition (130 GB used, D: ), 8 GB swap partition, 13 GB / partition (6 GB used), 62 GB /home partition (20 GB used).

  Read the article

• enable curl in cPanel control panel of a shared hosting for my account

  - by Jayapal Chandran

  I have hosted my site in a shared environment. Recently for security reasons the hosting company has disabled socket functions. When i enquired them they said that they will enable to people who personally request for that option. And they said it is a matter of 2 minutes work and asked for my control panel username and password. They said that it is just updating the php.ini for my account. So i want to know how to do it myself. If that could be done by them in 2 minutes then why cant a developer. I asked them but they mumbled... saying not to give trouble to me. so i want to know how to edit php.ini or something like stated above my hosting is using cPanel control panel. suggestions please.

  Read the article

• New graphics card (GTX 760) slowing down entire PC

  - by Cayetano Gonçalves

  My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

  Read the article

• How to config putty remote port forwarding to connect mysql?

  - by kev

  I installed MySQL to a Windows box. I want to connect it from a Linux box. I run plink to setup a remote port forwarding in Windows box. I try to connect it from Linux box, but it's not working. Windows (192.168.1.101) C:\> plink -v -N -R 3306:localhost:3306 [email protected] -pw ADMIN Also tried putty with this config: Port forwarding: R3306->localhost:3306 Linux (192.168.1.102) $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) $ nc localhost 3306 J 5.5.283V6L[fnu¦¦!¦$N>-c-R9bbG{mysql_native_password

  Read the article

• Sound does not work on the administrator profile.Works on a non-administrator profile on Windows XP

  - by Sharjeel Sayed

  Initially I suspected a missing driver, but then sound ( for movies,songs etc ) works fine on the other non-administrator account, but does not work when I log in to the Administrator account. And yes..I have checked the sound volume and mute status as well. Details of my system OS: Windows XP Professional Service Pack 3 (build 2600) Processor: 2.00 gigahertz AMD Athlon 64 Memory: 448 Megabytes Usable Installed Memory Board: ASUSTeK Computer Inc. K8V-MX Bus Clock: 200 megahertz BIOS: American Megatrends Inc. 0112 07/18/2005 Multimedia: SoundMAX Integrated Digital Audio Any help would be appreciated.Thanks in advance

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >