Search Results

Search found 82005 results on 3281 pages for 'cost based data structure'.

Page 1467/3281 | < Previous Page | 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474  | Next Page >

• Replication in PG 9 between Windows and Linux boxes

  - by mlaverd

  I have PostgreSQL 9 running on Windows 2003 SP2. I am trying to replicate it on a Fedora 12 system running PostgreSQL 9 as well. I am hitting this error message: /usr/pgsql-9.0/bin/postgres -D /var/lib/pgsql/9.0/data/ -p 5432 2011-02-11 17:43:26 ISTFATAL: incorrect checksum in control file Because of firewall restrictions, I could not follow the official instructions to the letter. Instead, I zipped the contents of the data directory when the server was offline and copied that to the Linux box. I ran a sha1deep on both directories and there were no mismatches. I changed the rights so that only the postgres user and group had access to the files. Now, what can I do for replication to work? I tried with a 'pg_dumpall', but the system complains that the database IDs do no match.

  Read the article

• Cannot add VMDK to VM that was cloned with FlexClone

  - by Daniel Lucas

  I have a virtual machine called VM-A with two VMDK's on volume VOL-A. Call these VMDK-1 (system) and VMDK-2 (data). I want to clone VMDK-2 and attach that clone to VM-A as a new disk, but I'm getting an error. Here are my steps: I use the following command to clone : clone start /vol/VOL-A/VMDK-2 /vol/VOL-A/VMDK-3 Run clone status which shows successful and I can see the new file in the volume In vCenter I edit the settings of VM-A and try to add VMDK-3, but get the following error: Failed to add disk scsi0:4, Failed to power on scsi0:4 I've tried adding this cloned disk to other VMs and get the same error. What could be the issue? My specs are below. NetApp FAS 2040 Data ONTAP 8.0.1 vSphere ESXi 4.1 vCenter Server 4.1 Thanks, Daniel

  Read the article

• Linux wget, how to display progress percentage after session has reload?

  - by skyrail

  I am running debian Squeeze in console mode on a plug computer. I control it opening an SSH session from a Windows machine, on the same local network. I started downloading a large file using wget. What I get is a console progress bar showing the percentage of data downloaded, file size, and download rate. When I close the session, debian is still running and downloading. Fine. But When I close and reopen a session, how can see which amount of data was downloaded, using a linux command ? thanks.

  Read the article

• Is there any online web application for daily activity logs [closed]

  - by user25

  I am looking for daily calendar-like apps, but ones that have some text editor attached for every day. All I want to do is that when I open that page, it should open the text editor for that day and I could enter some data of what I have accomplished, then save it. The next day I'd like it so when I open the application, then I can go to new page, but I have all of the previous day's data to have a look at what I have done. Something like Google calendar, but I need an associated text editor to paste some notes, stuff, etc. on a daily basis with logs.

  Read the article

• Can I execute an SSRS report from a windows batch file?

  - by Christine

  We are using SQLServer 2008R2 and would like to run and SSRS report from a windows batch file. We're loading data warehouse tables using a third party scheduler program and at the end our dataload we want to run a data quality report using SSRS. I can create report subscribtions to email the report but how do I communicate to the report server that the job is done and it's time to run the report? OUr scheduler application can run batch files so if I could pass this to the report server through a batch file that would be great...

  Read the article

• Adeos's role w.r.t Linux

  - by Anisha Kaul

  The event pipeline The fundamental Adeos structure one must keep in mind is the chain of client domains asking for event control. A domain is a kernelbased software component which can ask the Adeos layer to be notified of: · Every incoming external interrupt, or autogenerated virtual interrupt; · Every system call issued by Linux applications, · Other system events triggered by the kernel code (e.g. Linux task switching, signal notification, Linux task exits etc.). From: Life with Adeos: http://www.xenomai.org/documentation/xenomai-2.4/pdf/Life-with-Adeos-rev-B.pdf Question: Adeos is supposed to be between the hardware and the Linux kernel, I can understand about Adeos telling the Linux about hardware interrupts but Why should Adeos know about the "system call" issued by Linux?

  Read the article

• Damaged XenServer Storage LVM partition table

  - by Fiolek

  I have a homeserver running under XenServer control with 3x1TB discs inside, one for XenServer and two mirrored(using Intel's fakeRAID and dmraid) for VMs and a user data(but now I think RAID didn't work). I tried to pass PCI card to VM using PCI-passthroug and I read somewhere that I need to recompile kernel with pciback module but something went wrong(I made mistake in /boot/extlinux.conf and server couldn't run) and I had to use LiveCD of GPartEd(I already had it on USB key) to correct this. But when I re-run the server all VDIs were gone. I have completly no idea what could go wrong. I tried to repair RAID using dmraid -R in the hope that everything will return to noramal but now I think this done more bad than good(and corrupted rest of LVM table...). Is there any possibility to recover this SR or only data from one(~100GB) of VDI? I also wants to apologise for my English, I'm not from English-speaking country and I'm only 16 years old, so I hadn't "time" to learn it(school isn't good place to do this) in sufficient way.

  Read the article

• Search for and print only matched pattern

  - by Ayman

  I have some huge xml text files. I need to write a script to find and print a specific tag only. I tried sed and grep but they both return the whole line. Using SunOS 5.x, so not all linux commands may work. grep -o is not available. The 'xml' file is not actually one huge xml document, but each line is a separate xml document, with just a few tags, not even nested. And the structure is fairly easy, so full xml parsers is not needed, and probably would not work. I was looking for sed, awk, or some other one liners, but could not get them to work, and they are both relatively new to me.

  Read the article

• RRAS server 2003 one nic vpn encrypted

  - by Daniel Woodhead

  Hi All, I have a a machine installed with Server 2003 standard on it. It is behind a standard adsl router. I have setup RRAS access on it with under the custom setting and selected just vpn as the machine only has one nic installed. I can connect to the server and it all works fine. I'm just wondering where the settings are to say that it is data encrypted. I know in xp when setting up a vpn you can check the option to encrypt the data, but doing this in server 2003 there isn't the option so thought i would try and use rras. The main reason that i want to do this is that xp only allows one connection at a time. Dan

  Read the article

• Windows Server 2008 Standard vs. Web

  - by Andreas

  I'm currently comparing Windows Server 2008 versions to see what to use. What i found is this, that might affect me: RAM: 32GB. (the same) Sockets: 4 (the same) Remote Desktop: 2 (the same) IIS: true (the same) Application Server: Only standard. I will run my server as a single CPU (4 core) 8GB RAM, 2x raid1 web-server running: IIS Asp.net .Net 4 Third part mail server. (Only for sending mail from my web-application) SQL Server Express (My data is not more then 10 GB) Some minor applications for import and export of data. I might use external load balancer if I install a second machine in the future. My question is if you see any reason for me to go for standard that is 4 x price compared to web. BR Andreas

  Read the article

• Load website and fill form from the command line

  - by Martin Scharrer

  Using the Linux command line (Bash shell) I like to load a specific website in my browser (normally Firefox, but other one would be ok as well as long it runs under Linux) and fill a pre-defined form with some data. Actually, this should run from a Makefile. Most of the form data is static and will be stored as variables in the Makefile, just some fields are to be filled manually before manually sending the form. I know how to load the website in question from the command line using: firefox <URL> But there seems no possibility to fill the form automatically with variables given on the command line. Is there a plugin, executable or JavaScript which allows me to do this? Any suggestions and hints are welcome. I don't mind coding some JavaScript.

  Read the article

• Gateway on a virtual network interface used by LXC guests

  - by linkdd

  I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

  Read the article

• Recursive reset file permissions on Windows

  - by Peter Horvath

  There is a big, complex directory structure on a relative big NTFS partition. Somebody managed to put very bad security privileges onto it - there are directories with randomly given/denied permissions, etc. I already run into permission bugs multiple times, and I found insecure permission settings multiple times (for example, write permissions for "Everyone", or false owners). I don't have time to check everything by hand (it is big). But luckily, my wishes are very simple. The most common: read/write/execute on anything for me, and maybe read for Everyone. Is it possible to somehow remove all security data from a directory and giving my (simple) wishes to overwrite everything there? On Unix, I used a chown -R ..., chmod -R ... command sequence. What is its equivalent on Windows?

  Read the article

• Bonjour/DNS Service Discovery queries

  - by senloe

  I'm trying to implement dns service discovery in my application (no, I'm not asking for a programmatic answer). What I believe is one of my big pain points is generating the query. I know I need to send out a multicast broadcast on port 5353 and want to look for devices of type _ipp._tcp and _print._tcp, but I don't know what the question section needs to look like. For example, in SSDP I sent out a query that looks like the following: "M-SEARCH * HTTP/1.1\r\n" "HOST: 239.255.255.250:1900\r\n" + "MAN: \"ssdp:discover\"\r\n" "ST: urn:schemas-upnp-org:device:Printer:1\r\n" "MX: 5000\r\n\r\n" From what I know about a DNS query I need to send something like: "_ipp.tcp,all,all" but I know there needs to be more. Any pointers to documentation, etc would be greatly appreciated! update rfc1035 appears to contain promising information re the message structure.

  Read the article

• Is it possible to stream input into RAR

  - by Dscoduc

  I'm using RARLABS RAR.exe to archive/backup my server data. I am familiar with using RAR for creating an archive and adding files from a folder, but what about streaming data directly into an archive? For example, when backing up my MySQL databases I use the mysqldump command that includes a pipe command into a text file. It would be nice to skip the file step and go directly into an archive file using something like the following syntax: mysqldump -uUserName -pPassword --all-databases > rar.exe newarchivename.rar Does anyone know if what I have described, or something similar, is even possible?

  Read the article

• Ping computername - result format

  - by kamleshrao

  Hi, I am trying PING command on my Windows 7 PC after many months. While doing this, I notice the following result: Ping using computer name: D:\>ping amdwin764 Pinging AMDWIN764 [fe80::ac53:546f:a730:8bd6%11] with 32 bytes of data: Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Reply from fe80::ac53:546f:a730:8bd6%11: time=1ms Ping statistics for fe80::ac53:546f:a730:8bd6%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms Ping using IP address: D:\>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=75ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Reply from 192.168.1.2: bytes=32 time=1ms TTL=128 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 75ms, Average = 19ms Why am I not getting the Ping results with Numeric IP address in my first example? Thanks, Kamlesh

  Read the article

• NAS4Free disk encryption and ZFS error

  - by MiNT

  I have installed a NAS4Free on a VM, and as recommended, i installed it on a 1GB virtual disk, and assigned another disk 500GB to this VM for file storage. I have created the disk, encrypted it, created a ZFS virtual disk, and then a ZFS storage pool. Everything was working. On every restart of this VM i needed to go on and mount the encrypted drive. Recently i upgraded the host machine, and now i cant mount or make it work. I have tried removing everything and setting up from scratch everything, with the exception of formating the disk, i have used an encrypted one without formating it. Does anybody have any suggestion on how can i at least get back my data, can i mount somehow the encrypted drive even in another utility, just need to get back the data that were on it.

  Read the article

• How to merge-copy multiple folders in Outlook?

  - by user553702

  In MS Outlook, I need to be able to incrementally copy items in multiple folders in the Exchange account to a local PST file with a mirrored folder structure. I need the items in each folder to be combined into the destination. For example, let's say on the server account I have a folder tree like this: Inbox SortedEmails1 SortedEmails2 SortedEmails3 I also have these same four folders in the local PST file, which I want to keep growing as I incrementally pull more messages from the Exchange server. Messages from "Inbox" should go to the local "Inbox", messages from "SortedEmails1" should go into "SortedEmails1" in the local PST, etc. I'd like to avoid manually iterating into every single folder and copying items. How can I do this?

  Read the article

• Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

  - by user38030

  Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails.

  Read the article

• Nginx, logrotate and empty files

  - by user37887

  Hi. I have a problem with nginx/logrotate. The problems is that nginx is logging access to 2 files (main and data). I have the following contrab setting: 0 * * * * /usr/sbin/logrotate -f /home/orwell/orwell-setup/bin/logrotate-nginx And the file "logrotate-nginx" has the following content: /tmp/data.log { rotate 90 daily missingok notifempty size 1 sharedscripts postrotate [ ! -f /tmp/nginx.pid ] || kill -USR1 `cat /tmp/nginx.pid` MORE THINGS endscript } /tmp/main.log { rotate 90 daily missingok notifempty size 1 sharedscripts postrotate [ ! -f /tmp/nginx.pid ] || kill -USR1 `cat /tmp/nginx.pid` MORE THINGS endscript } The work is done in the two files, but there is a problem that nginx stops logging into those files. Both files are created, but they are empty. Any ideas why nginx stop logging info to both files?

  Read the article

• DPM 2010 "Disk failed or disk not found"

  - by SysAdmin

  I have an HP Proliant ML110 G5 server with Windows server 2008R2 only dedicated for DPM 2010. This server has a limit in HD of 8TB which has already been met. I'm now stuck in this situation where my disk keeps failing "Disk failed or Disk not found" in the disk management. Only after I reboot the system the disk comes back up. Today I was running my monthly tape backup on a certain protection group and the disk failed again while the tape job was running (so the job wasn't completed). This is the description of the error in the alerts: "The disk Disk 1 - Hitachi HDS722020ALA330 SCSI Disk Device cannot be detected or has stopped responding. All subsequent protection activities that use this disk will fail until the disk is brought back online. (ID 3120)". My backup system is becoming useless! I don't think that is a hardware issue (please correct me if I'm wrong) since the HD works fine for a certain period of time which is becoming shorter and shorter. I basically have no more option to fix this problem. I tried to fix any error that was coming up in the event viewer with no luck (included one regarding the SQL2008 compatibility issue). The disk keeps failing! Now I'm only trying to recover/migrate the data from the disk that is having problem but my issue now is that I cannot add any drives to my server since I already got installed the maximum storage capacity 8TB. I thought about 2 simple options. Please tell me what you guys think about it; Unplug one of the 2 storage pool disks (disk0, that one without problem) from the machine and install a new one in order to migrate the data with the Migration tool for DPM. Remove the defective disk (disk1), put back the disk0 and run the synchronization/consistency check on all the groups to recreate replicas and recovery points. Run diskpart.exe and clean up the disk (loosing all data) and hoping that he will work after I sync all the protection groups. Both solutions are not elegant but I have no better options at the moment. Please I need some help. Thanks for your time Angelo

  Read the article

• Why would ssh fail to expand %h variable in .ssh/config?

  - by Zoran

  Why would ssh fail to expand %h from .ssh/config? This used to work and still works except on a RHEL box. Looking for what the origin of this could be. Is there a setting somewhere that tells ssh to not expand %h? I have something like this in my .ssh/config: Host *.foo HostName %h.mydomain.com On the RHEL box where this doesn't work, I get this: $ ssh -vvvv bar.foo OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /home/zsimic/.ssh/config debug1: Applying options for *.foo debug1: Applying options for *.foo debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 ssh: Could not resolve hostname %h.mydomain.com: Name or service not known

  Read the article

• Secondary DHCP server won't start on Centos 6.2

  - by Slowjoe

  I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

  Read the article

• How to increase hard drive transfer speed

  - by atif089

  This is my motherboard GA-M61PME-S2 (SATA upto 3.0 Gbps) and This is my Hard Disk Samsung hd502hi Capacity 500 GB Cache 16MB Disks / Heads 1 / 2 Interface SATA 3Gb/s Spindle Speed 5400 RPM Sustained Data Rate OD 100 MB/s Average Seek 8.9 ms Average Latency 5.56 ms Data Transfer Rate 300 MB/sec Weight 470 grams Power: Idle / Seek / R-W / Spin-up 3.9W / 4.8W / 5.1W / ~24W Acoustics (sound power) 2.2 / 2.7 Bel (idle / quiet seek / performance seek) When I copy things from one partition to another they transfer at a maximum of 30 MBps. However the drive supports upto 300 MBps right ? How do I increase the transfer speeds? P.S - Using Windows XP, All partitions are NTFS.

  Read the article

• TCP/IP- what is it exactly?

  - by OckhamsRazor

  I know that this question sounds stupid, but over all these years, I still have difficulty explaining TCP/IP to people. I don't completely get it myself, and even after reading up on it, the distinction is not very clear. What I get so far is that IP deals with networks while TCP involves delivery of messages over that network. I'm not totally convinced though. Also, they reside on different layers of the Internet architecture. Could anyone disambiguate this distinction using a simple analogy or examples? Also, I read this somewhere The difference is that TCP is responsible for the data delivery of a packet and IP is responsible for the logical addressing. In other words, IP obtains the address and TCP guarantees delivery of data to that address. Is this correct? Thanks for helping me out. One last thing- Where does the ethernet come in all of this?

  Read the article

< Previous Page | 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474  | Next Page >