Search Results

Search found 1272 results on 51 pages for 'led backlight'.

Page 15/51 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Suspended Laptop Cannot Wake Up - Ubuntu

    - by Zack
    I've got an ASUS G73JH, and whenever I suspend it or hibernate it, it will not wake up. The screen stays backlight but is black. I can't: Awaken it with the keyboard Awaken it with the mouse Soft power-off by pressing the power button I have to hold down the power button and shut it down that way, and this seems a little unreasonable. Is there a place I could look for more detail as to what's causing this? Is there a known quick-fix to this issue?

    Read the article

  • How do I replace the screen of a Dell Inspiron 1545?

    - by Ajus10
    I got a new screen for a Dell Inspiron 1545. The old screen says Dell Inspiron 1545 LP156WH1 (TL)(C1?) HD and the new one says Dell Inspiron 1545 LP156WH1 (TL)(C1?) LCD Does that make a difference? All I can get to work on the new screen is the backlight. The old screen had a crack. Now when I plug the old one in, it will not turn on at all. Could I have blown the inverter or messed up the cable?

    Read the article

  • Why did my laptop turn off?

    - by darenw
    Normally I can slip my running laptop into a backpack, go somewhere, and if it's no more than about half an hour later, it'll still be running. At the destination I plug in the AC power unit and all is well. I run it off of the AC unit before and after the trip, have the screen at less than full backlight brightness, and don't have any peripherals that burn power. Sometimes the wireless switch accidentally slides in the backpack, and that causes extra power to be used and the laptop dies before I reach the destination. Sad, but so be it. But sometimes the wireless switch is off, I've reached the destination in less than 30 minutes (typically 10-20 min), and I know the battery was fully charged, yet the machine is off. Is there a way to determine, after the fact, why the machine shut itself off? I'm running Linux on a fairly powerful Gateway with 4GB RAM, fancy nvidia graphics, dual core cpu, chosen more for number crunching power than battery life, but should last easily for half an hour if not an hour.

    Read the article

  • Hard drives indication with controller MegaRAID SAS 9261-8i on HP Proliant DL320e Gen8. Is it possible?

    - by ame
    Give me advice, please. My situation: There're the server HP ProLiant DL320e Gen8 and MegaRAID SAS 9261-8i RAID Controller. I installed Controller into server and I reconnected Mini-SAS cord from block of hard drives to controller, but I haven't any indication of hard discs on server front panel. There's indication of activity of drives only during boot of server. Controller has 2-pin connector (JT6B3, SAS Activity LED header) but where and how can I connect it? Thanx.

    Read the article

  • Gnome 3 screensaver (not suspend) resume hook?

    - by Daniel
    Since whenever my laptop screen resumes sleeping (i.e. wakes up from screensaving) some settings are reset, such as keyboard backlight, I'd like to run some scripts each time this happens. I'm using gnome 3 with fedora 17 by the way. When researching this issue I came across pm-utils which allows one to hook anything to events handled by pm-utils but it seems to me monitor sleeping (i.e. screensaving) is not one of them. Looks like pm-utils only handles suspend and hybernate. So is there a way to hook up custom programs to screensaver?

    Read the article

  • Laptop automatic shutdown after 2 seconds

    - by leladax
    I'm trying to insvestigate which component produces this behavior. Other indications show it may be the GPU but I wonder if anyone knows more. It's a Toshiba Satellite X200 description: AC power shows the power being fed normally, when turned on the fan works and it appears to be starting up but after 2 seconds it shuts down with only the 'AC power connected" led on. -- seconds are about up to 4,maybe not 2 exactly.

    Read the article

  • Will this netbook allow me to run mutiple programs without issues?

    - by erik
    I'd like to use a netbook to run mIRC skype Messenger pretty much all at the same time. It this netbook a good choice? http://www.notebookzone.co.za/default/sony-vpc-w216.html Quick Overview Intel Atom N450 (1.66GHz), 2GB Ram /320GB HDD, 10.1" LCD-WXGA:1366 x 768, LED, Windows 7 Starter 32bit, Only 1.19Kg, Web Cam, Wireless, BT The combination of high-resolution wide 10.1" screen and Isolation Keyboard helps to put the Internet at your fingertips anytime you want it. Available in : white / pink / blue / brown

    Read the article

  • How to set Laptop Brightness in Gnome and /proc on Thinkpad W510?

    - by hakre
    I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness I'm using the nouveau driver. With the nvida driver the brightness can not be controlled.

    Read the article

  • Windows 7 laptop with problems shutting down

    - by Seth Sticco
    This is a thinkpad convertible tablet with Windows 7. When you try to shut down, it seizes at a screen with a gradient background and a Think/Thinkpad logo (forgot which). If you close it at that point, wait for the moon led to light up (meaning it's sleeping), then open it back up, it immediately continues and shuts down successfully. Any ideas on how to troubleshoot this?

    Read the article

  • some keys don't appear in xev

    - by sazary
    i can't change my screen brightness by pressing brightness keys on the keyboard, but they change through /sys/class/backlight/acpi_video0/brightness. so i started to diagnose the issue, ran xev and trying to see what happens when i press Fn+F5 or Fn+F6 which are brightness controls, and xev didn't show anything. i must note that it notifies my when i press volume controls, for example. are F5 and F6 keys working? yes, but not when i press them with Fn key. do i have any entry in xmodmap for brightness? yes: keycode 232 = XF86MonBrightnessDown NoSymbol XF86MonBrightnessDown keycode 233 = XF86MonBrightnessUp NoSymbol XF86MonBrightnessUp what's happening? and what should i do to correct it? i'm using vaio s series laptop with kubuntu precise on it. thanx ;)

    Read the article

  • Hp pavilion dv7 power button

    - by Danny B
    My power button is non responsive I am getting LED for charging. I've taken it apart before to change the dc jack and it was fine and a few months later it just powered off. I try to power back on and is goes to start up then shuts off. I just took it apart and came to find the ribbon cable connecting the power button/speakers cover is barely hanging on do I have to replace the whole thing or is there a way to replace the ribbon cable?

    Read the article

  • Where and How should a Kernel Panic be reported?

    - by KangCoding
    I've Archlinux installed on my laptop Fujitsu Amilo Pi 2*** and I cannot find any log at /var/log that has the StackTrace. The Kernel panics ALWAYS when I try to modify screen brightness. Where are those Logs or StackTraces? Do I have to install any package to catch that StackTrace? Where should I send that Log/StackTrace? Thanks for reading. -- UPDATE 1 I cannot change brightness trough console: xbacklight -get and any other parameter as -dec or -inc always returns: [kangcoding@Pi2530Arch ~]$ xbacklight -set 100 No outputs have backlight property I still cannot find log files or stacktraces of this Kernel Panic. Here is a Photo:

    Read the article

  • Is there a modern Windows FLAC encoder application? [closed]

    - by David Yaw
    I've decided I want to use FLAC for my music library, but I'm not sure what I should be using to encode the FLAC files. The latest release on flac.sourceforge.net is 5 years old, as are all of the other applications shown on the download page. Googling for updated encoders has just led me back to the same 5 year old apps. Is there a more up-to-date FLAC encoder, either a Windows GUI or Windows CLI app?

    Read the article

  • Laptop Brightness in Gnome and /proc - Thinkpad W510

    - by hakre
    I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness

    Read the article

  • Protected flash video (requires HAL) on Gentoo

    - by Mala
    I am unable to play "protected" flash video, such as Amazon Prime Instant Video. From what I've read and uncovered, this seems to be due to a lack of HAL being installed on my computer. Confirmation that it is required for protected video can be seen towards the beginning of http://helpx.adobe.com/x-productkb/multi/flash-player-11-problems-playing.html However, hal is not in the gentoo portage tree, and in any case has been deprecated and replaced by udev. How can I go about getting Amazon Prime Instant Video to work again? I was considering grabbing the source from http://www.freedesktop.org/wiki/Software/hal but the links there won't load, and trying to install it from old ebuilds or from overlays which claim to still support it (e.g. kde-sunset) result in a compilation error: In file included from addon-generic-backlight.c:38:0: /usr/include/glib-2.0/glib/gmain.h:21:2: error: #error "Only <glib.h> can be included directly." Has anyone else solved this issue?

    Read the article

  • Indicating end of Standard Input

    - by waiwai933
    How does one indicate that one has finished entering test in stdin? For example, let's say that I wish to encrypt 'blue' using MD5 (I know MD5 is unsecure, but just for this example). I tried user$ blue | md5 which I was led to understand is how one pipes input to stdin, but it doesn't work right. But if I just enter user$ md5 I can enter the word 'blue'. But how do I indicate to md5 that I'm finished entering text?

    Read the article

  • Lenovo G500 Re-booting failed

    - by Sune
    I have a Lenovo G500. Yesterday it asked me to reboot the system. I did. Now it wont come back on. I have tried everything I read online like taking out the battery and holding the power button in for 20 seconds, then switching on the pc with only the ac adapter plugged in. I still only see the backlight of the pc, nothing else. I also tried to hold in the Fn key and tried all other F keys (F2, F12, etc.) I also pressed that little button next to the power button, but nothing is responding. Please help.

    Read the article

  • How to set the laptop screen brightness programatically?

    - by zls
    I'm currently migrating to openbox without gnome session. In unity i can use the vendor keys to set the screen brightness, but in openbox I'm on my own. /sys/class/backlight/acpi_video0/brightness works fine, the problem is that I need sudo to set the brightness and that wouldn't work with keyboard mappings. xbacklight -get/set doesn't do or output anything. I don't really want to use xrandr --brightness. Are there any other options or a way to fix the problems with xbacklight or acpi_video0 ?

    Read the article

  • Can I prevent Oracle users from creating public synonyms but allow private ones?

    - by ninesided
    I've had a few issues where users have mistakenly created public synonyms which have led to people thinking some objects are in one schema when they're actually in another schema. Everyone knows they should be using private synonyms, but occasionally they forget or they make a mistake and someone gets burned. Is it possible to GRANT users the permission to create private synonyms but disallow public ones?

    Read the article

  • Sony Vaio laptop hangs up on boot

    - by Kole
    When I power on the laptop it displays the "Vaio" logo and the screen after show, but after that the screen is completely blank but the backlight is lit. Nothing progresses from here. When trying to press f8 to boot into safe mode, nothing happens, black screen again. I created a windows 7 32bit install disk (I had the same OS on it before) to repair or even format my pc. I boot from the disk and it loads all the files and gets to the "Windows is starting" screen but after that it always hangs up on a blank screen with a mouse cursor. Is there any fix to this whatsoever?

    Read the article

  • Tcp Port Open by Unknown Service

    - by Singularity
    Running openSUSE 11.2 x86_64. Here's what a nmap of my IP provides: PORT STATE SERVICE 23/tcp open telnet 80/tcp open http 2800/tcp open unknown 8008/tcp open http I would like to know How to view What service is causing Port 2800 to be opened? A few search engine results led me to believe that it is supposedly a port opened by a Trojan called "Theef". If it is indeed a Trojan, what can be done to weed it out? Is my desktop's security compromised?

    Read the article

  • What are the possible causes of a not-booting motherboard with drdebug 00 code?

    - by Dutow
    I have pursached a new Asrock Z68 Extreme4 motherboard with an i7 2600K and 2x4GB ADATA DDR3. My problem is that it doesn't boot or beep, and the onboard drdebug led constantly displays "00" - which is according to the board's manual, "not used". The power cables are probably conntecting, because if I disconnect the 4+4 or 20+4 cable, nothing is displayed on the leds. Has anybody seen this error? What are the possible causes?

    Read the article

  • Function keys for ASUS n56vm not working

    - by Lars
    i have installed Ubuntu 12.10 (64bits) (3.5.0-18 kernel) on an ASUS N56VM. Most fn+key are working except for: brightness keys (fn+f5/fn+f6) don't work. fn+c - gamma keys fc+v - camera fn+space - toggle speed. I really like, at least, to have the brightness keys working. Can you help? Best Regards $ dmesg | grep -i asus [ 0.000000] DMI: ASUSTeK COMPUTER INC. N56VM/N56VM, BIOS N56VM.206 04/13/2012 [ 0.000000] ACPI: RSDP 00000000cafcc000 00024 (v02 _ASUS_) [ 0.000000] ACPI: XSDT 00000000cafcc078 00074 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000cafdf858 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000cafcc188 136CA (v02 _ASUS_ Notebook 00000013 INTL 20091112) [ 0.000000] ACPI: APIC 00000000cafdf950 00092 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000cafdf9e8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.000000] ACPI: ECDT 00000000cafdfa30 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: MCFG 00000000cafdfaf8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000cafdfb38 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001) [ 0.000000] ACPI: HPET 00000000cafdfcb0 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.000000] ACPI: BGRT 00000000cafe1090 00038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013) [ 9.670500] asus_wmi: ASUS WMI generic driver loaded [ 9.671627] asus_wmi: Initialization: 0x1asus_wmi: BIOS WMI version: 7.9 [ 9.671673] asus_wmi: SFUN value: 0x6a0877<6>[ 9.672086] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input4 [ 9.732438] Registered led device: asus::kbd_backlight [ 9.733242] asus_wmi: Backlight controlled by ACPI video driver

    Read the article

  • Kernel compile error with iw_ndis.c

    - by James
    Hi, I have a hp pavilion dm3t with intel HD graphics running ubuntu 10.10 64 bit. I'm trying to compile and install a patched kernel according to this, https://launchpad.net/~kamalmostafa/+archive/linux-kamal-mjgbacklight So I downloaded the tarball from here (linked to from the page above): http://kernel.ubuntu.com/git?p=kamal/ubuntu-maverick.git;a=shortlog;h=refs/heads/mjg-backlight I untar'd it to a directory, entered the directory and did: make defconfig I'm not sure if that's what I should have done but it was successful, so I did: make which seemed to work fine until it gave these errors: ubuntu/ndiswrapper/iw_ndis.c:1966: error: unknown field ‘num_private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1966: warning: initialization makes pointer from integer without a cast ubuntu/ndiswrapper/iw_ndis.c:1967: error: unknown field ‘num_private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: excess elements in struct initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: (near initialization for ‘ndis_handler_def’) ubuntu/ndiswrapper/iw_ndis.c:1970: error: unknown field ‘private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1970: warning: initialization makes integer from pointer without a cast ubuntu/ndiswrapper/iw_ndis.c:1970: error: initializer element is not computable at load time ubuntu/ndiswrapper/iw_ndis.c:1970: error: (near initialization for ‘ndis_handler_def.num_standard’) ubuntu/ndiswrapper/iw_ndis.c:1971: error: unknown field ‘private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1971: warning: initialization from incompatible pointer type make[2]: *** [ubuntu/ndiswrapper/iw_ndis.o] Error 1 make[1]: *** [ubuntu/ndiswrapper] Error 2 make: *** [ubuntu] Error 2 How can I compile and install this kernel successfully? I'm new to this and would appreciate any help.

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >