Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 154/670 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• Our embedded linux system won't recognize a USB Device if it is plugged in before powerup. Suggestions?

  - by Blaine

  We are developing on a small embedded device. This device us a gumstix overo board running OpenEmbedded linux. We have our development almost completely done, and have run into the strangest of bugs that we can't figure out. We have a USB Device (Spectrophotometer) that has a USB2.0 Connection and an external power supply for the light source. Typical behavior is that you plug in the power supply, then the USB connection to a host. When the usb connection is detected by the device, the device boots up and enables the light source and fan. The device is then able to be used by the host system. The problem is that if the device is plugged into the Gumstix before we turn on the Gumstix, the USB Device apparently is not probed by the system (and hence does not turn on). Under a normal situation, when the connection is initialized by plugging in the usb cable, the spectro turns itself on and becomes available to the system (this can be seen via "lsusb" typically). Neither of these things are happening. There is no device detected via "lsusb" and no dmesg errors of any kind that we can see. It is as if the device is not plugged in. The device does show up and work fine if we unplug the USB cable and plug it back in once the system is booted up. It turns on and shows up on the usb bus, and we can access it with our driver. On any other desktop or laptop, it does not matter if the host system is on or off when we plug in the spectrometer. This behavior is what I would consider to be "normal" - that the usb system is probed and initialized at boot time, and the usb devices come online. In other words, our system is fully functional as long as we plug in the usb device after the system is booted up. Unfortunately this isn't possible in our final product - everything comes on at once. Additional Info: 1) We have tried a flash drive attached to the system when the system is turned off. Booting up the system brings the flash drive online, as expected 2) There are no messages regarding the spectro or usb device (using dmesg). "lsusb" only lists the USB hubs / controllers. It is literally as if the device is not present and not plugged in. 3) We have tried a brand new image from gumstix and an older image from last year. Both images have this problem. This problem exists on all 3 gumstix devices we use. Does anyone have any suggestions? From what I can tell it isn't really possible to do a complete "reboot" of the usb system that is a complete emulation of "unplugging" and "replugging" a usb device. I feel like what is happening is that there is no initial probe on the usb bus that would trigger the usb handshaking, but this is somehow specific to the spectro. This seems to be a kernel issue or at least an issue in how the kernel is initializing the usb subsystem. I'm not really sure though. I have tried the gumstix mailing list, but there doesn't seem to be anyone who has seen this issue before. Any advice or suggestions on where to start looking would be fantastic. Thank you! Blaine output etc. $ uname -a Linux overo 2.6.33 #1 Tue Apr 27 08:35:38 PDT 2010 armv7l GNU/Linux When the system is up and running and spectro is plugged in (working as intended), this is lsusb: Bus 001 Device 116: ID 2457:1022 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2457 idProduct 0x1022 bcdDevice 0.02 iManufacturer 1 USB4000 1.01.11 iProduct 2 Ocean Optics USB4000 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) dmesg output: usb usb1: usb auto-resume hub 1-0:1.0: hub_resume usb usb2: usb auto-resume ehci-omap ehci-omap.0: resume root hub hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-0:1.0: hub_resume hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci-omap ehci-omap.0: suspend root hub usb usb2: usb resume ehci-omap ehci-omap.0: resume root hub hub 2-0:1.0: hub_resume ehci-omap ehci-omap.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2: status 0501 change 0001 hub 2-0:1.0: state 7 ports 3 chg 0004 evt 0000 hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: new high speed USB device using ehci-omap and address 2 ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: default language 0x0409 usb 2-2: udev 2, busnum 2, minor = 129 usb 2-2: New USB device found, idVendor=2457, idProduct=1022 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Ocean Optics USB4000 usb 2-2: Manufacturer: USB4000 1.01.11 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: uevent usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' dmesg has nothing to say, and lusb simply lists nothing else but the two default usb controllers / hubs if we plug the device in before the system is turned on.

  Read the article

• Fibre channel long distance woes

  - by Marki

  I need a fresh pair of eyes. We're using a 15km fibre optic line across which fibrechannel and 10GbE is multiplexed (passive optical CWDM). For FC we have long distance lasers suitable up to 40km (Skylane SFCxx0404F0D). The multiplexer is limited by the SFPs which can do max. 4Gb fibrechannel. The FC switch is a Brocade 5000 series. The respective wavelengths are 1550,1570,1590 and 1610nm for FC and 1530nm for 10GbE. The problem is the 4GbFC fabrics are almost never clean. Sometimes they are for a while even with a lot of traffic on them. Then they may suddenly start producing errors (RX CRC, RX encoding, RX disparity, ...) even with only marginal traffic on them. I am attaching some error and traffic graphs. Errors are currently in the order of 50-100 errors per 5 minutes when with 1Gb/s traffic. Optics Here is the power output of one port summarized (collected using sfpshow on different switches) SITE-A units=uW (microwatt) SITE-B ********************************************** FAB1 SW1 TX 1234.3 RX 49.1 SW3 1550nm (ko) RX 95.2 TX 1175.6 FAB2 SW2 TX 1422.0 RX 104.6 SW4 1610nm (ok) RX 54.3 TX 1468.4 What I find curious at this point is the asymmetry in the power levels. While SW2 transmits with 1422uW which SW4 receives with 104uW, SW2 only receives the SW4 signal with similar original power only with 54uW. Vice versa for SW1-3. Anyway the SFPs have RX sensitivity down to -18dBm (ca. 20uW) so in any case it should be fine... But nothing is. Some SFPs have been diagnosed as malfunctioning by the manufacturer (the 1550nm ones shown above with "ko"). The 1610nm ones apparently are ok, they have been tested using a traffic generator. The leased line has also been tested more than once. All is within tolerances. I'm awaiting the replacements but for some reason I don't believe it will make things better as the apparently good ones don't produce ZERO errors either. Earlier there was active equipment involved (some kind of 4GFC retimer) before putting the signal on the line. No idea why. That equipment was eliminated because of the problems so we now only have: the long distance laser in the switch, (new) 10m LC-SC monomode cable to the mux (for each fabric), the leased line, the same thing but reversed on the other side of the link. FC switches Here is a port config from the Brocade portcfgshow (it's like that on both sides, obviously) Area Number: 0 Speed Level: 4G Fill Word(On Active) 0(Idle-Idle) Fill Word(Current) 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance LS VC Link Init OFF Desired Distance 32 Km Reserved Buffers 70 Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port OFF Port Auto Disable: OFF Rate Limit OFF EX Port OFF Mirror Port OFF Credit Recovery ON F_Port Buffers OFF Fault Delay: 0(R_A_TOV) NPIV PP Limit: 126 CSCTL mode: OFF Forcing the links to 2GbFC produces no errors, but we bought 4GbFC and we want 4GbFC. I don't know where to look anymore. Any ideas what to try next or how to proceed? If we can't make 4GbFC work reliably I wonder what the people working with 8 or 16 do... I don't assume that "a few errors here and there" are acceptable. Oh and BTW we are in contact with everyone of the manufacturers (FC switch, MUX, SFPs, ...) Except for the SFPs to be changed (some have been changed before) nobody has a clue. Brocade SAN Health says the fabric is ok. MUX, well, it's passive, it's only a prism, nature at it's best. Any shots in the dark? APPENDIX: Answers to your questions @Chopper3: This is the second generation of Brocades exhibiting the problem. Before we had 5000s, now we have 5100s. In the beginning when we still had the active MUX we rented a longdistance laser once to put it into the switch directly in order to make tests for a day, during that day of course it was clean. But as I said, sometimes it's clean just like that. And sometimes it's not. Alternative switches would mean to rebuild the entire SAN with those only to test. Alternative SFPs, well they're hard to come by just like that. @longneck: The line is rented. It's a dark fibre (9um monomode) so there's noone else on it. Sure there are splices. I can't go and look but I have to trust they have been done correctly. As I said the line has been checked and rechecked (using an optical time-domain reflectometer). Obviously you don't have all this equipment yourself because it's way too expensive. @mdpc: What would be the "wrong" type of cable according to you? Up to the switch everything is monomode, yes. The connectors are the correct ones too. Yeah I know there are the green ones where the fibre is cut off at a certain angle etc. But we have the correct ones for all that I know. Progress Report #1 We have had two fabrics (=2x2 switches) with Brocade 5100s with FabricOS 6.4.1 and two fabrics (another 2x4 switches) on FabricOS 7.0.2. On the longdistance ISLs (one in each fabric) it turned out that with FOS 6.4.1 setting it to long distance issues warnings about the VC Init setting and consequently the fill word. But those are only warnings. FOS 7.0.2 requires you to do modifications to VCI and the fillword for long distance links. Setting FOS 6.4.1 to the LS (long-distance static distance) setting with wrong VCI and fillword setting made the whole fabric inoperational (stuck in an SCN loop, use fabriclog -s to see, you don't see it anywhere else, no port error counters or anything increasing). Currently I'm giving the one fabric with the IMHO more correct settings a beating and it seems to do fine, whereas the other one without much traffic still has errors here and there. In short: We have eliminated the active part of the MUX (the FC retimer). We are putting the long distance SFPs into the end equipment themselves. Just to be sure we bought new monomode cables to connect the end equipment to the remaining passive part of the MUX. We are now trying out several long distance configs. It's almost black magic. Everything that happens is mostly empirical, noone seems to have a clue what are the exact reasons to do something. ("We have tried this, and it didn't work, then we tried that and it worked, so we stuck with that." But noone really seems to know why.) I'll keep you updated. Progress Report #2 We got the new lasers for one of the fabrics on warranty. It's ultra clean even on 4GbFC. They're transmitting with roughly 2mW (3dBm) whereas the others are only at 1.5mW (1.5dBm) although that should really be enough. The other fabric (where the lasers are apparently ok) still produces one or two CRCs infrequently. Using sfpshow the SFP producing the actual RX errors shows Status/Ctrl: 0x82 Alarm flags[0,1] = 0x5, 0x40 Warn Flags[0,1] = 0x5, 0x40 Now I'll have to find out what that means. Not sure if it was there before. Well I'll first clear my head with a week of vacation. 8-)

  Read the article

• Know More About Oracle Row Lock

  - by Liu Maclean(???)

  ??????Oracle??????????row lock,??ORACLE????????????????????,row lock???????????????????????????????,??Server Process?pin????block buffer????????? ????????,?process A ??update???????? Z?????????, ???????rollback???commit;??Process B??????DML??, ???????rowid???? Z???, ???????????process A????????ITL???,????????cleanout??,????????row???????????commit, ???????Process B????”enq: TX – row lock contention”??????? ????Process B????????????? ?????????Process A???????row,??Process B???????”enq: TX – row lock contention”???? ????????  ????????: SESSION A: SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE    10.2.0.5.0      Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> create table maclean_lock(t1 int); Table created. SQL> insert into maclean_lock values (1); 1 row created. SQL> commit; Commit complete. SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from maclean_lock; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------                                67642                                    1 SQL>  select distinct sid from v$mystat;        SID ----------        142 SQL> select pid,spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat));        PID SPID ---------- ------------         17 15636 ??SESSION A ????savepoint ,?update ?????????         SQL>  savepoint NONLOCK; Savepoint created. SQL> select * From v$Lock where sid=142; no rows selected SQL> set linesize 140 pagesize 1400 SQL>  update maclean_lock set t1=t1+2; 1 row updated. SQL> select * From v$Lock where sid=142; ADDR             KADDR                   SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 0000000091FC69F0 0000000091FC6A18        142 TM      55829          0          3          0          6          0 00000000914B4008 00000000914B4040        142 TX     393232        609          6          0          6          0         SQL> select dump(3,16) from dual; DUMP(3,16) -------------------------------------------------------------------------------- Typ=2 Len=2: c1,4 ALTER SYSTEM DUMP DATAFILE 1 BLOCK 67642;  Object id on Block? Y  seg/obj: 0xda16  csc: 0x00.234718  itc: 2  flg: O  typ: 1 - DATA      fsl: 0  fnx: 0x0 ver: 0x01  Itl           Xid                  Uba         Flag  Lck        Scn/Fsc 0x01   0x000a.00f.000001e0  0x00800075.02a6.29  C---    0  scn 0x0000.00234711 0x02   0x0007.018.000001fe  0x0080065c.017a.02  ----    1  fsc 0x0000.00000000 data_block_dump,data header at 0x81d185c =============== tsiz: 0x1fa0 hsiz: 0x14 pbl: 0x081d185c bdba: 0x0041083a      76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f9a avsp=0x1f83 tosp=0x1f83 0xe:pti[0]      nrow=1  offs=0 0x12:pri[0]     offs=0x1f9a block_row_dump: tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x2  cc: 1 col  0: [ 2]  c1 04 end_of_block_dump ?? BLOCK DUMP ???? ??????XID=0x0007.018.000001fe ?transaction?? lb:0x1 ??SESSION B ,?????UPDATE?? ???enq: TX - row lock contention ?? SQL> select distinct sid from v$mystat;        SID ----------        140 SQL> select pid,spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat));        PID SPID ---------- ------------         24 15652 SQL> alter system set "_trace_events"='10000-10999:255:24'; System altered.         SQL> update maclean_lock set t1=t1+2; select * From v$Lock where sid=142 or sid=140 order by sid; SESSION C: SQL> select * From v$Lock where sid=142 or sid=140 order by sid; ADDR             KADDR                   SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 0000000091FC6B10 0000000091FC6B38        140 TM      55829          0          3          0         84          0 00000000924F4A58 00000000924F4A78        140 TX     458776        510          0          6         84          0 00000000914B51E8 00000000914B5220        142 TX     458776        510          6          0        312          1 0000000091FC69F0 0000000091FC6A18        142 TM      55829          0          3          0        312          0 ???? SESSION B SID=140 ?SESSION A ?TX ENQUEUE ?X mode?REQUEST SQL> oradebug dump systemstate 266; Statement processed. SESSION B waiter's enqueue lock       SO: 0x924f4a58, type: 5, owner: 0x92bb8dc8, flag: INIT/-/-/0x00       (enqueue) TX-00070018-000001FE    DID: 0001-0018-00000022       lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  res_flag: 0x6       req: X, lock_flag: 0x0, lock: 0x924f4a78, res: 0x925617c0       own: 0x92b76be0, sess: 0x92b76be0, proc: 0x92a737a0, prv: 0x925617e0 TX-00070018-000001FE=> TX 458776 510 SESSION A owner's enqueue lock       SO: 0x914b51e8, type: 40, owner: 0x92b796d0, flag: INIT/-/-/0x00       (trans) flg = 0x1e03, flg2 = 0xc0000, prx = 0x0, ros = 2147483647 bsn = 0xed5 bndsn = 0xee7 spn = 0xef7       efd = 3       file:xct.c lineno:1179       DID: 0001-0011-000000C2       parent xid: 0x0000.000.00000000       env: (scn: 0x0000.00234718  xid: 0x0007.018.000001fe  uba: 0x0080065c.017a.02  statement num=0  parent xid: xid: 0x0000.000.00000000  scn: 0x00 00.00234718 0sch: scn: 0x0000.00000000)       cev: (spc = 7818  arsp = 914e8310  ubk tsn: 1 rdba: 0x0080065c  useg tsn: 1 rdba: 0x00800069             hwm uba: 0x0080065c.017a.02  col uba: 0x00000000.0000.00             num bl: 1 bk list: 0x91435070)             cr opc: 0x0 spc: 7818 uba: 0x0080065c.017a.02       (enqueue) TX-00070018-000001FE    DID: 0001-0011-000000C2       lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  res_flag: 0x6       mode: X, lock_flag: 0x0, lock: 0x914b5220, res: 0x925617c0       own: 0x92b796d0, sess: 0x92b796d0, proc: 0x92a6ffd8, prv: 0x925617d0        xga: 0x8b7c6d40, heap: UGA       Trans IMU st: 2 Pool index 65535, Redo pool 0x914b58d0, Undo pool 0x914b59b8       Redo pool range [0x86de640 0x86de640 0x86e0e40]       Undo pool range [0x86dbe40 0x86dbe40 0x86de640]         ----------------------------------------         SO: 0x91435070, type: 39, owner: 0x914b51e8, flag: -/-/-/0x00         (List of Blocks) next index = 1         index   itli   buffer hint   rdba       savepoint         -----------------------------------------------------------             0      2   0x647f1fc8    0x41083a     0xee7 ?SESSION A? ROLLBACK ?savepoint: SQL> rollback to NONLOCK; Rollback complete. ????savepoint ??update??????? ??UPDATE???????? ROLLBACK: SQL> select * From v$Lock where sid=142 or sid=140; ADDR             KADDR                   SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 00000000924F4A58 00000000924F4A78        140 TX     458776        510          0          6        822          0 0000000091FC6B10 0000000091FC6B38        140 TM      55829          0          3          0        822          0 00000000914B51E8 00000000914B5220        142 TX     458776        510          6          0       1050          1 ???? SESSION A 142 ???SAVEPOINT ???????TM LOCK ????? ROLLBACK TO SAVEPOINT?????SESSION???TX LOCK!!!! ??????SESSION 142???TX ID1=458776 ID2=510, ????ROLLBACK TO SAVEPOINT?????????ABORT TRANSACTION ?? SESSION B  SID=140??  SESSION A ?? , ?????????SESSION B? update???HANG?? ?????????CACHE?????:  Object id on Block? Y  seg/obj: 0xda16  csc: 0x00.2347b7  itc: 2  flg: O  typ: 1 - DATA      fsl: 0  fnx: 0x0 ver: 0x01  Itl           Xid                  Uba         Flag  Lck        Scn/Fsc 0x01   0x000a.00f.000001e0  0x00800075.02a6.29  C---    0  scn 0x0000.00234711 0x02   0x0000.000.00000000  0x00000000.0000.00  ----    0  fsc 0x0000.00000000 data_block_dump,data header at 0x745d85c =============== tsiz: 0x1fa0 hsiz: 0x14 pbl: 0x0745d85c bdba: 0x0041083a      76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f9a avsp=0x1f83 tosp=0x1f83 0xe:pti[0]      nrow=1  offs=0 0x12:pri[0]     offs=0x1f9a block_row_dump: tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x0  cc: 1 col  0: [ 2]  c1 02 end_of_block_dump ???? ITL=0x02? ?????????,col  0: [ 2]  c1 02 ????????? ?????????SESSION D ,??????row lock?? ?UPDATE???????? SESSION D: SQL> update maclean_lock set t1=t1+2; 1 row updated. SQL> rollback; Rollback complete. ??SESSION B ??????????? ?????ORACLE????????, ??????????? TX lock?? row lock , ????????2??? row lock?????????, ?TX lock????????ENQUEUE LOCK???? ?????????PROCESS K?DML???????????????????????,??????????TX LOCK, ????PROCESS Z?????????????????????????ROW LOCK????????, ???????OLTP?????????????????????? ??ROW LOCK?Release ??????TX?ENQUEUE LOCK,?????????Process J ????????????, Process K??????????? ,Process K?????????,???row piece?lb??0x0 ,?????ITL, Process Z???ITL???????Process J????XID,?????Process J?????TX lock, PROCESS K ???TX resource?Enqueue Waiter Linked List?????X mode(exclusive)?enqueue lock? ???Process J??TX lock?,Process J?????TX resource?Enqueue Waiter Linked List ???Process K??????,??POST?????Process K? TX lock??????, ???????row lock???????,????????? ?????????? ?????: SESSION A ???PID =17 ?????????????????? SESSION B ???PID =24 ??????? "_trace_events"='10000-10999:255:24';  KST trace ??????? Server Process??? SESSION A PID=17  ?? acqure?SX mode???TM Lock ,?? ????Transaction?????UNDO SEGMENT 7,???XID 7.24.510, ?acquire ?X mode? TX-00070018-000001fe ? ?????? 00070018-000001fe ???? 7- 24 - 510? XID ? 781F4B8A:007A569C    17   142 10704  83 ksqgtl: acquire TM-0000da15-00000000 mode=SX flags=GLOBAL|XACT why="contention" 781F4B92:007A569D    17   142 10704  19 ksqgtl: SUCCESS 781F4BB3:007A569E    17   142 10812   2 0x000000000041083A 0x0000000000000000 0x0000000000234717 781F4BBA:007A569F    17   142 10812   3 0x0000000000000000 0x0000000000000000 0x0000000000000000 781F4BC0:007A56A0    17   142 10812   4 0x0000000000000000 0x0000000000000000 0x0000000000000000 781F4BD3:007A56A1    17   142 10812   5 0x000000000041083A 0x0000000000000000 0x0000000000000000 781F4BFE:007A56A2    17   142 10811   1 0x000000000041083A 0x0000000000000000 0x0000000000234711 0x0000000000000002 781F4C06:007A56A3    17   142 10811   2 0x000000000041083A 0x0000000000000000 0x0000000000234718 0x00007FA074EDA560 781F4C26:007A56A4    17   142 10813   1 ktubnd: Bind usn 7 nax 1 nbx 0 lng 0 par 0 781F4C43:007A56A5    17   142 10813   2 ktubnd: Txn Bound xid: 7.24.510 781F4C4A:007A56A6    17   142 10704  83 ksqgtl: acquire TX-00070018-000001fe mode=X flags=GLOBAL|XACT why="contention" 781F4C51:007A56A7    17   142 10704  19 ksqgtl: SUCCESS ?????????? ???????? 781F4CBF:007A56A8    17   142 10005   1 KSL WAIT BEG [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 781F4CCC:007A56A9    17   142 10005   2 KSL WAIT END [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 time=13 781F4CDE:007A56AA    17   142 10005   1 KSL WAIT BEG [SQL*Net message from client] 1650815232/0x62657100 1/0x1 0/0x0 786BD85D:007A57E0    17   142 10005   2 KSL WAIT END [SQL*Net message from client] 1650815232/0x62657100 1/0x1 0/0x0 time=5016447 786BD966:007A57E1    17   142 10005   1 KSL WAIT BEG [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 786BD96E:007A57E2    17   142 10005   2 KSL WAIT END [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 time=8 SESSION B ???PID =24  ,??????? SX mode? TM lock,??row lock? acquire X mode?TX-00070018-000001fe ksqgtl: acquire TM-0000da15-00000000 mode=SX flags=GLOBAL|XACT why="contention" ksqgtl: SUCCESS 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000000000001 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000008A63780 0x0000000000000001 0x0000000000800861 0x0000000000000241 0x0000000000000001 0x000000000041083A 0x0000000000000001 0x0000000000000001 0x000000000041083A 0x0000000000000000 0x00000000002354F9 0x0000000000000002 ksqgtl: acquire TX-00070018-000001fe mode=X flags=GLOBAL|LONG why="row lock contention" C4048EBD:007F52B6    24   140 10005   2 KSL WAIT END [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe time=2929879 C4048ED4:007F52B7    24   140 10005   1 KSL WAIT BEG [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe C43146CA:007F535E    24   140 10005   2 KSL WAIT END [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe time=2930676 ????????? ,PID=24 ??????ksqcmi???????? deadlock C43146D9:007F535F    24   140 10704 134 ksqcmi: performing local deadlock detection on TX-00070018-000001fe C43146F8:007F5360    24   140 10704 150 ksqcmi: deadlock not detected on TX-00070018-000001fe ?? ??? PID 17 ??ROLLBACK ???? ,????????: PID 17 ROLLBACK; D7A495BB:007F9D3E    17   142 10005   4 KSL POST SENT postee=24 loc='ksqrcl' id1=0 id2=0 name=   type=0 D7A495D8:007F9D3F    17   142 10444  12 ABORT TRANSACTION - xid: 0x0007.018.000001fe ??  PID 17 ??? TX resource?Enqueue Waiter linked List ???PID 24???,????KSL POST SENT ?? PID 24, ???ksqrcl???ENQUEUE LOCK ?PID 24??????KSL POST (KSL POST RCVD poster=17), ?ksqgtl???? TX-00070018-000001fe ?? ksqrcl??, ??PID 24???????? TX lock?USN ,??????? USN 3 XID 3.11.582 ,???acquire TX-0003000b-00000246 D7A49616:007F9D41    24   140 10005   3 KSL POST RCVD poster=17 loc='ksqrcl' id1=0 id2=0 name=   type=0 fac#=0 facpost=1 D7A4961C:007F9D42    24   140 10704  19 ksqgtl: SUCCESS D7A4967D:007F9D43    24   140 10704 117 ksqrcl: release TX-00070018-000001fe mode=X D7A496A5:007F9D44    24   140 10813   1 ktubnd: Bind usn 3 nax 1 nbx 0 lng 0 par 0 D7A496C2:007F9D45    24   140 10813   2 ktubnd: Txn Bound xid: 3.11.582 D7A496C7:007F9D46    24   140 10704  83 ksqgtl: acquire TX-0003000b-00000246 mode=X flags=GLOBAL|XACT why="contention" D7A496E4:007F9D47    24   140 10704  19 ksqgtl: SUCCESS ROW LOCK?Release ??????TX?ENQUEUE LOCK,?????????Process J ????????????, Process K??????????? ,Process K?????????,???row piece?lb??0×0 ,?????ITL,Process Z???ITL???????Process J????XID,?????Process J?????TX lock,PROCESS K ???TX resource?Enqueue Waiter Linked List?????X mode(exclusive)?enqueue lock? ???Process J??TX lock?,Process J?????TX resource?Enqueue Waiter Linked List ???Process K??????,??POST?????Process K? TX lock??????,???????row lock???????,?????????

  Read the article

• c#: sms appears to have been sent, but stuck in phone outbox

  - by I__

  i wrote code to send an SMS using my gsm phone which is attached to the computer through com port. the code is below. the problem is i do see that it is in the outbox of the phone and it actually appears to have been sent, but when i contact the recipient they say that i have not received the message. i test the phone, and i create and send a message using only the phone and it works perfectly, however when i do this with my code, it APPEARS to have been sent, and i am getting all the correct AT COMMAND responses from the phone, but the message is actually NOT sent. here is the code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.Threading; using System.IO.Ports; namespace WindowsFormsApplication1 { public partial class Form1 : Form { SerialPort serialPort1; int m_iTxtMsgState = 0; const int NUM_MESSAGE_STATES = 4; const string RESERVED_COM_1 = "COM1"; const string RESERVED_COM_4 = "COM4"; public Form1() { InitializeComponent(); this.Closing += new CancelEventHandler(Form1_Closing); } private void Form1_Load(object sender, EventArgs e) { serialPort1 = new SerialPort(GetUSBComPort()); if (serialPort1.IsOpen) { serialPort1.Close(); } serialPort1.Open(); //ThreadStart myThreadDelegate = new ThreadStart(ReceiveAndOutput); //Thread myThread = new Thread(myThreadDelegate); //myThread.Start(); this.serialPort1.DataReceived += new SerialDataReceivedEventHandler(sp_DataReceived); } private void Form1_Closing(object sender, System.ComponentModel.CancelEventArgs e) { serialPort1.Close(); } private void SendLine(string sLine) { serialPort1.Write(sLine); sLine = sLine.Replace("\u001A", ""); consoleOut.Text += sLine; } public void DoWork() { ProcessMessageState(); } public void ProcessMessageState() { switch (m_iTxtMsgState) { case 0: m_iTxtMsgState = 1; SendLine("AT\r\n"); //NOTE: SendLine must be the last thing called in all of these! break; case 1: m_iTxtMsgState = 2; SendLine("AT+CMGF=1\r\n"); break; case 2: m_iTxtMsgState = 3; SendLine("AT+CMGW=" + Convert.ToChar(34) + "+9737387467" + Convert.ToChar(34) + "\r\n"); break; case 3: m_iTxtMsgState = 4; SendLine("A simple demo of SMS text messaging." + Convert.ToChar(26)); break; case 4: m_iTxtMsgState = 5; break; case 5: m_iTxtMsgState = NUM_MESSAGE_STATES; break; } } private string GetStoredSMSID() { return null; } /* //i dont think this part does anything private void serialPort1_DataReceived_1(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { string response = serialPort1.ReadLine(); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); } */ void sp_DataReceived(object sender, SerialDataReceivedEventArgs e) { try { Thread.Sleep(500); char[] msg; msg = new char[613]; int iNumToRead = serialPort1.BytesToRead; serialPort1.Read(msg, 0, iNumToRead); string response = new string(msg); this.BeginInvoke(new MethodInvoker(() => textBox1.AppendText(response + "\r\n"))); serialPort1.DiscardInBuffer(); if (m_iTxtMsgState == 4) { int pos_cmgw = response.IndexOf("+CMGW:"); string cmgw_num = response.Substring(pos_cmgw + 7, 4); SendLine("AT+CMSS=" + cmgw_num + "\r\n"); //stop listening to messages received } if (m_iTxtMsgState < NUM_MESSAGE_STATES) { ProcessMessageState(); } } catch { } } private void button1_Click(object sender, EventArgs e) { m_iTxtMsgState = 0; DoWork(); } private void button2_Click(object sender, EventArgs e) { string[] sPorts = SerialPort.GetPortNames(); foreach (string port in sPorts) { consoleOut.Text += port + "\r\n"; } } private string GetUSBComPort() { string[] sPorts = SerialPort.GetPortNames(); foreach (string port in sPorts) { if (port != RESERVED_COM_1 && port != RESERVED_COM_4) { return port; } } return null; } }

  Read the article

• Abstracting the adding of click events to elements selected by class using jQuery

  - by baroquedub

  I'm slowly getting up to speed with jQuery and am starting to want to abstract my code. I'm running into problems trying to define click events at page load. In the code below, I'm trying to run through each div with the 'block' class and add events to some of its child elements by selecting them by class: <script language="javascript" type="text/javascript"> $(document).ready(function (){ $('HTML').addClass('JS'); // if JS enabled, hide answers $(".block").each(function() { problem = $(this).children('.problem'); button = $(this).children('.showButton'); problem.data('currentState', 'off'); button.click(function() { if ((problem.data('currentState')) == 'off'){ button.children('.btn').html('Hide'); problem.data('currentState', 'on'); problem.fadeIn('slow'); } else if ((problem.data('currentState')) == 'on'){ button.children('.btn').html('Solve'); problem.data('currentState', 'off'); problem.fadeOut('fast'); } return false; }); }); }); </script> <style media="all" type="text/css"> .JS div.problem{display:none;} </style> <div class="block"> <div class="showButton"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem"> <p>Answer 1</p> </div> </div> <div class="block"> <div class="showButton"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem"> <p>Answer 2</p> </div> </div> Unfortunately using this, only the last of the divs' button actually works. The event is not 'localised' (if that's the right word for it?) i.e. the event is only applied to the last $(".block") in the each method. So I have to laboriously add ids for each element and define my click events one by one. Surely there's a better way! Can anyone tell me what I'm doing wrong? And how I can get rid of the need for those IDs (I want this to work on dynamically generated pages where I might not know how many 'blocks' there are...) <script language="javascript" type="text/javascript"> $(document).ready(function (){ $('HTML').addClass('JS'); // if JS enabled, hide answers // Preferred version DOESN'T' WORK // So have to add ids to each element and laboriously set-up each one in turn... $('#problem1').data('currentState', 'off'); $('#showButton1').click(function() { if (($('#problem1').data('currentState')) == 'off'){ $('#showButton1 > a').html('Hide'); $('#problem1').data('currentState', 'on'); $('#problem1').fadeIn('slow'); } else if (($('#problem1').data('currentState')) == 'on'){ $('#showButton1 > a').html('Solve'); $('#problem1').data('currentState', 'off'); $('#problem1').fadeOut('fast'); } return false; }); $('#problem2').data('currentState', 'off'); $('#showButton2').click(function() { if (($('#problem2').data('currentState')) == 'off'){ $('#showButton2 > a').html('Hide'); $('#problem2').data('currentState', 'on'); $('#problem2').fadeIn('slow'); } else if (($('#problem2').data('currentState')) == 'on'){ $('#showButton2 > a').html('Solve'); $('#problem2').data('currentState', 'off'); $('#problem2').fadeOut('fast'); } return false; }); }); </script> <style media="all" type="text/css"> .JS div.problem{display:none;} </style> <div class="block"> <div class="showButton" id="showButton1"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem" id="problem1"> <p>Answer 1</p> </div> </div> <div class="block"> <div class="showButton" id="showButton2"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem" id="problem2"> <p>Answer 2</p> </div> </div>

  Read the article

• Handling file upload in a non-blocking manner

  - by Kaliyug Antagonist

  The background thread is here Just to make objective clear - the user will upload a large file and must be redirected immediately to another page for proceeding different operations. But the file being large, will take time to be read from the controller's InputStream. So I unwillingly decided to fork a new Thread to handle this I/O. The code is as follows : The controller servlet /** * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse * response) */ protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { // TODO Auto-generated method stub System.out.println("In Controller.doPost(...)"); TempModel tempModel = new TempModel(); tempModel.uploadSegYFile(request, response); System.out.println("Forwarding to Accepted.jsp"); /*try { Thread.sleep(1000 * 60); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ request.getRequestDispatcher("/jsp/Accepted.jsp").forward(request, response); } The model class package com.model; import java.io.IOException; import java.util.concurrent.ExecutionException; import java.util.concurrent.Future; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.utils.ProcessUtils; public class TempModel { public void uploadSegYFile(HttpServletRequest request, HttpServletResponse response) { // TODO Auto-generated method stub System.out.println("In TempModel.uploadSegYFile(...)"); /* * Trigger the upload/processing code in a thread, return immediately * and notify when the thread completes */ try { FileUploaderRunnable fileUploadRunnable = new FileUploaderRunnable( request.getInputStream()); /* * Future<FileUploaderRunnable> future = ProcessUtils.submitTask( * fileUploadRunnable, fileUploadRunnable); * * FileUploaderRunnable processed = future.get(); * * System.out.println("Is file uploaded : " + * processed.isFileUploaded()); */ Thread uploadThread = new Thread(fileUploadRunnable); uploadThread.start(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } /* * catch (InterruptedException e) { // TODO Auto-generated catch block * e.printStackTrace(); } catch (ExecutionException e) { // TODO * Auto-generated catch block e.printStackTrace(); } */ System.out.println("Returning from TempModel.uploadSegYFile(...)"); } } The Runnable package com.model; import java.io.File; import java.io.FileInputStream; import java.io.FileNotFoundException; import java.io.FileOutputStream; import java.io.IOException; import java.io.InputStream; import java.nio.ByteBuffer; import java.nio.channels.Channels; import java.nio.channels.ReadableByteChannel; public class FileUploaderRunnable implements Runnable { private boolean isFileUploaded = false; private InputStream inputStream = null; public FileUploaderRunnable(InputStream inputStream) { // TODO Auto-generated constructor stub this.inputStream = inputStream; } public void run() { // TODO Auto-generated method stub /* Read from InputStream. If success, set isFileUploaded = true */ System.out.println("Starting upload in a thread"); File outputFile = new File("D:/06c01_output.seg");/* * This will be changed * later */ FileOutputStream fos; ReadableByteChannel readable = Channels.newChannel(inputStream); ByteBuffer buffer = ByteBuffer.allocate(1000000); try { fos = new FileOutputStream(outputFile); while (readable.read(buffer) != -1) { fos.write(buffer.array()); buffer.clear(); } fos.flush(); fos.close(); readable.close(); } catch (FileNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } System.out.println("File upload thread completed"); } public boolean isFileUploaded() { return isFileUploaded; } } My queries/doubts : Spawning threads manually from the Servlet makes sense to me logically but scares me coding wise - the container isn't aware of these threads after all(I think so!) The current code is giving an Exception which is quite obvious - the stream is inaccessible as the doPost(...) method returns before the run() method completes : In Controller.doPost(...) In TempModel.uploadSegYFile(...) Returning from TempModel.uploadSegYFile(...) Forwarding to Accepted.jsp Starting upload in a thread Exception in thread "Thread-4" java.lang.NullPointerException at org.apache.coyote.http11.InternalInputBuffer.fill(InternalInputBuffer.java:512) at org.apache.coyote.http11.InternalInputBuffer.fill(InternalInputBuffer.java:497) at org.apache.coyote.http11.InternalInputBuffer$InputStreamInputBuffer.doRead(InternalInputBuffer.java:559) at org.apache.coyote.http11.AbstractInputBuffer.doRead(AbstractInputBuffer.java:324) at org.apache.coyote.Request.doRead(Request.java:422) at org.apache.catalina.connector.InputBuffer.realReadBytes(InputBuffer.java:287) at org.apache.tomcat.util.buf.ByteChunk.substract(ByteChunk.java:407) at org.apache.catalina.connector.InputBuffer.read(InputBuffer.java:310) at org.apache.catalina.connector.CoyoteInputStream.read(CoyoteInputStream.java:202) at java.nio.channels.Channels$ReadableByteChannelImpl.read(Unknown Source) at com.model.FileUploaderRunnable.run(FileUploaderRunnable.java:39) at java.lang.Thread.run(Unknown Source) Keeping in mind the point 1., does the use of Executor framework help me in anyway ? package com.utils; import java.util.concurrent.Future; import java.util.concurrent.ScheduledThreadPoolExecutor; public final class ProcessUtils { /* Ensure that no more than 2 uploads,processing req. are allowed */ private static final ScheduledThreadPoolExecutor threadPoolExec = new ScheduledThreadPoolExecutor( 2); public static <T> Future<T> submitTask(Runnable task, T result) { return threadPoolExec.submit(task, result); } } So how should I ensure that the user doesn't block and the stream remains accessible so that the (uploaded)file can be read from it?

  Read the article

• Dovecot: no auth attempts in 0 secs (IMAP protocol)

  - by Luca D'Amico

  I'm having a lot of problems configuring dovecot ony vps. I'm already able to send email using port 110 and to receive email using port 25, but I can't connect using port 993 and 995. I'm using self-signed ssl certificates. When I try to connect to 993 this error is logged: Jun 8 19:06:39 MY_HOSTNAME dovecot: imap-login: Disconnected (no auth attempts in 2 secs): user=<>, rip=MY_IP, lip=MY_VPS_IP, TLS, session=<MY_SESSION> When I try to connect to 995 here is the error log: Jun 8 19:08:17 MY_HOSTNAME dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=MY_IP, lip=MY_VPS_IP, TLS: SSL_read() failed: error:14094416:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate unknown: SSL alert number 46, session=<MY_SESSION> EDIT: I was able to fix this part by refreshing my mail client ssl cert. Anybody can help me please ? I'm stuck :/ Many thanks

  Read the article

• Why does ssh hang after "debug1: loaded 3 keys"

  - by James Moore

  Trying to log in to an Amazon EC2 instance running Ubuntu 10.04.1. I can log in just fine, no issues. A different user, coming from a different network just gets this: OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to xxxx [xxxx] port 80. debug1: Connection established. debug1: identity file /.ssh/identity type -1 debug1: identity file /.ssh/id_rsa type -1 debug1: identity file /.ssh/id_dsa type -1 debug1: loaded 3 keys And then it hangs. We've tried running sshd on port 22 and port 80 I'm guessing that it's not a firewall problem since the verbose output reports that the connection is established. I don't see anything in /var/log/auth.log when the failing user connects. I do see entries when I log in successfully.

  Read the article

• Mac does not recognize wide screen

  - by DUKE

  I am using Mac OS X Lion 10.7.4 on my Mac mini, with Samsung monitor with default resolution 1360 x 768. My Mac mini is connected to Samsung VGA port by Apple mini port to VGA adapter. When starting, my Mac does not recognize the wide screen resolution and always starts in a 4:3 mode, (but it shows 1360x768 as the resolution in the settings). I have to do one of the following actions to bring my Mac to the wide screen resolution: (1) Changing to some other resolution and bring back to the default resolution. (2) Unplug the Apple mini port to VGA adapter and re-connect again. (3) Put the machine to sleep and wake it up again. I am using Ubuntu 12.04, (in a different partition) in the same hardware, but Ubuntu is perfectly recognizing the display.

  Read the article

• Intranet Site Authentication Issues on SBS 2008

  - by mwillmott

  Hello, Simply, the Sharepoint intranet site that is automatically installed with SBS 2008 is bound to port 5555 in IIS so to get to it you can browse to server-name:5555 and then authenticate using domain credentials. I have added another binding on port 80 using a host header so intranet.localdomain.local (and added the required record in the DNS). This works fine from any computer on the domain, you can go to the nicer address and authenticate no problem. However, when you browse to the port 80 binding on the local server it reaches it but fails to authenticate. I cannot figure out why and it is really annoying. Not essential to fix but it would be nice. Any ideas? Michael

  Read the article

• Varnish VCL Reload Fails After Adding Second Backend

  - by Andy

  I have been running Varnish on my production server successfully for several weeks now. Now I'm trying to configure Varnish to use a second backend for certain requests. My original working VCL (/etc/varnish/default.vcl) begins like this: backend default { .host = "127.0.0.1"; .port = "8080"; } ...rest of VCL... And I'm changing it to: backend default { .host = "127.0.0.1"; .port = "8080"; } backend backend2 { .host = "12.34.56.78"; .port = "80"; } ...rest of VCL... When I reload the VCL file, I get the following: Command failed with error code 106 Failed to reload /etc/varnish/default.vcl. Any idea what the error could be, or how I can get more information on the problem?

  Read the article

• Linux IPTables / routing issue

  - by Jon

  Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

  Read the article

• Unable to connect to Adobe Connect

  - by ub3rst4r

  I am having troubles trying to connect my colleges Adobe Connect. I have done the test meeting connection and it will say "Unable to connect". I have tried connecting on 3 other computers and it works with flying colors. I am running Norton 360 on my computer and I also tried it on my other laptop thats also running Norton 360 and it works on that laptop. I also checked my hosts file and that is not the problem because I am able to connect to the server (on port 80) but not the Adobe Connect port (port 1935). The only thing in it is "127.0.0.1 localhost" Here are the details from the log that the test created: Player Version: WIN 11,3,300,271 App-Server returned: code:ok, servers=rtmp://connect.bowvalleycollege.ca:1935/_rtmp://localhost:8506/,rtmpt://connect.bowvalleycollege.ca:443/_rtmp://localhost:8506/ ERROR: FMS Server did not return correctly! Here is my specifications: Windows 7 SP1 x64 Norton 360 v6.3 (latest) It won't connect in Firefox v15, Chrome v19, or IE9 All of my computers are connected through the same router (D-Link DIR-625) Any ideas?

  Read the article

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• Lots of TIME_WAIT connections in netstat (Windows Server 2008)

  - by Rhys Causey

  I'm having some issues on a Windows 2008 server with some network connections not going through. For instance, in a web application on the server, we need to open a socket connection to another server, and this fails sometimes with the following message: Only one usage of each socket address (protocol/network address/port) is normally permitted I looked up the error, which led me to this page: http://msdn.microsoft.com/en-us/library/aa560610(v=bts.20).aspx, which indicates that it might be TCP/IP port exhaustion. When I perform netstat -n, I get tons of TIME_WAIT connections on port 80. Does anyone have any idea what could be causing this?

  Read the article

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• Isolating VMware virtual machines from the network

  - by jetboy

  I have: VMware Workstation 7 running on a Windows 7 box (with a single NIC), with multiple virtual machines running a range of OSs. The host box is connected to a WRT54G router running Tomato firmware. The router is acting as a wireless bridge to another WRT54G that's wired to my broadband modem. I can access the VMs externally via VNC using VMware's Remote Display. Over time I've had these running: a. Using NAT networking (single IP) with port forwarding on the router and a custom port in VMware for each VM. b. Using bridged networking with static IPs assigned to each VM via MAC address, and port forwarding on the router to each IP running with standard ports. Either way, the host box, and other physical machines on the network are accessible from the VMs. Is there a way to isolate the VMs from the rest of the network, but still maintain internet access and remote VNC to the VMs?

  Read the article

• WinXP How to Tunnel LPT over USB

  - by Michael Pruitt

  I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

  Read the article

• How do I tell sudo to write files with a umask of 0022?

  - by mipadi

  I recently upgrading to Snow Leopard. I have noticed that some files written by MacPorts are installed with the wrong permission -- they are written with a umask of 0077. I think I have narrowed down the problem: The port command is invoked via sudo. My .bashrc file specifies a umask of 0077. On older versions of OS X (10.5 and below), sudo used the umask of the root user (which was 0022); however, now it uses my umask of 0077. Is there anyway to have sudo use the old behavior? Right now, it's kind of annoying because I have to use sudo to run simple commands like port installed, port outdated, etc. (The problem is described in more detail in this MacPorts ticket.) Edit I discovered the umask option for sudo, and in /etc/sudoers I added the following line: Defaults umask=0022 However, this did not function as desired, because the real umask used by sudo is the union of the user mask with this default mask.

  Read the article

• Uninstall last n of ports/packages

  - by Radio

  While compiling some port, I realized that it depends on 1000+ of other ports and will install forever until I die or my disk is full (my hdd is really small). I interrupted make install clean. How do I uninstall and clean those dependencies which have already been built and installed? (there are at least 100+ of them) pkg_cutleaves wont work in this case, since the main port wasn't registered yet. Please help. FreeBSD 9.0-RELEASE amd64 EDIT: Another way to ask this question: How can I see all dependencies for a non-registered port, and all subdependencies for those dependencies, independent with previously installed ports or their [sub]dependencies?

  Read the article

• Unexpected "Connection timed out: proxy connect" lines in Apache error.log

  - by Gregg Lind

  I see some unexpected lines in my Apache (1.3!) error.log. What is happening here? My isp has complained in the past about proxying attempts... how do I check for them? [Sun Apr 4 16:43:32 2010] [error] [client 60.173.11.34] (110)Connection timed out: proxy connect to 61.132.221.146 port 80 failed [Sun Apr 4 16:44:11 2010] [error] [client 60.173.11.34] (110)Connection timed out: proxy connect to 61.132.221.146 port 80 failed [Sun Apr 4 16:45:34 2010] [error] [client 79.2.28.220] (110)Connection timed out: proxy connect to 203.212.171.170 port 80 failed (If more information would be useful, please ask me to clarify!)

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• Amazon EC2 SSH Failed to connect "Bad File Number"

  - by Mark McCook

  This is the command I am told to use by clicking connect in the control panel "ssh -i private_key.pem root@instancePublicDNS" Well that one failed so I wanted to know what happen so I ran "ssh -vvv private_key.pem root@instancePublicDNS" OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug2: ssh_connect: needpriv 0 debug1: Connecting to private_key.pem [...] port 22. debug1: connect to address ... port 22: Attempt to connect timed out without establishing a connection ssh: connect to host private_key.pem port 22: Bad file number Any Ideas? I have searched for the answer on google and serverfault, I found a few possible solutions that did not work. info about the instance AMI-ID : ami-688c7801 ( ubuntu 10.10 Server )

  Read the article

• SFTP is not connecting to remote server

  - by Crono15

  $ sftp -vvv Remote_IP Connecting to Remote_IP... OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to Remote_IP [Remote_IP] port 22. debug1: connect to address Remote_IP port 22: Operation timed out ssh: connect to host Remote_IP port 22: Operation timed out Connection closed I set up an account for SFTP only access with a chroot. I tested that on the server and it works fine. The problem is, I could not get remote SFTP access to the server to work right. The example above is what I keep on running into. I have been trying to figure out how to solve this problem for 2 days now. I am not sure if it have to do with /etc/ssh/sshd_config. Is it something that I am not aware of? I am hoping that you could help point me to the right place for this issue.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >