Search Results

Search found 7152 results on 287 pages for 'bug fixing'.

Page 158/287 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• How to stop Windows 7 from applying patches on shutdown

  - by Stabledog

  I have my Windows 7 Pro set up to "download patches, but let me choose when to install them". However, on several occasions, when I have shut down the O/S, Windows Update has proceeded with a lengthy patch application even though I issued no permission to do so. This is a bit scary to me... in particular, it seems I cannot trust the Windows Update settings. Is this official policy somewhere at Microsoft, or am I witnessing a bug? What can be done about it?

  Read the article

• Outlook 2007 - Monospace/preformatted quickstyle

  - by joelarson

  In Outlook 2003 I could set a block of text as preformatted, which was mighty handing for emailing code snippets. This prevented line wrapping, and specified that a monospace font be used in whatever email client recieved my email. Now in Outlook 2007, there are at least three problems: 'Plain Text' style (apparently the closest thing to 'preformatted' as a style) is buried beneath about five clicks, and adding it to the quick style gallery and saving the gallery seems to be forgotten (bug?) It uses some fancy Microsoft font 'Consolas' that is not on some of my coworkers machines that use thunderbird It does not appear that there is any way to get it flagged as a monospace font so that other email clients will display it properly. Does anybody know how to quickly set text to 'preformatted' as Outlook 2003, meaning A) use a monospace font B) flag it as monospace for other clients C) avoid hard line breaks?

  Read the article

• CHKDSK is unable to fix NTFS errors

  - by HackToHell

  After my PC shutdown due to power failure, I noticed several errors in EventViewer. The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2. and The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:. So I forced a chkdsk check at startup, and it finds a stream of error, here is the output, it is smaller than the actual log, because, Event Viewer only seems to have this much, the same line was repeated thousands of times.Here is that line. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x198f2 is already in use. Deleting corrupt attribute record (128, "") from file record segment 104690. Attribute record of type 0x80 and instance tag 0x0 is cross linked Also, even after running CHKDSK, the same errors were being reported again so I ran CHKDSK another time and it still loops the same line above, without fixing the error. Can anyone tell me how to fix it?

  Read the article

• What can go wrong with a GLIBC upgrade?

  - by Sevenless

  I recently installed a piece of software that my group needs for a research project starting next September. Turns out the software has a known crash bug when used with glibc 2.12.1. My boss asked if we can upgrade glibc on the server that's supposed to run it. Cue my skeptical silence.... At some point, I got it into my brain that messing with glibc was about as good an idea as messing with a hungry puma; however, I've been unable to determine the source of this belief. So, if I go ahead with this: Am I doing something flagrantly stupid (e.g. I won't fix my problem, I will brick my server, or I will initiate a zombie apocalypse)? What can go wrong? What is likely to go wrong? How do I avoid the answers to 2 and 3?

  Read the article

• SNMP counter issues with cisco RV082

  - by Chance

  Does anyone else poll this router with SNMP? We are using firmware version: 2.0.0.19-tz We are having problems with the traffic counters, some of them appear to be implemented as 16 bit counter instead of 32 bit counters. The reason this is causing problems is that they roll over (at 65,000) to 0 in less than our minute polling cycle, really skewing our metrics. The counter for the Lan (interface 2) seems to be functioning properly, however interfaces 3 and 4 (WAN and DMZ / WAN2) rollover at 65000. Tue May 11 08:38:31 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865677943 IF-MIB::ifInOctets.3 = Counter32: 12450 IF-MIB::ifInOctets.4 = Counter32: 49354 Look at counter IF-MIB::ifInOctets.4 5 seconds later: Tue May 11 08:38:36 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865836207 IF-MIB::ifInOctets.3 = Counter32: 13167 IF-MIB::ifInOctets.4 = Counter32: 12900 Any suggestions? Seems like a bug to me, however I just wanted to make sure I wasn't crazy.. Thanks!

  Read the article

• Update openssl in debian squeeze

  - by PiTheNumber

  There is this CVE-2014-0224 bug in openssl so I would like to update my affected # openssl version OpenSSL 0.9.8o 01 Jun 2010 But there is no update for squeeze. I read the it is already fixed in squeeze-LTS. What I am supposed to do? Will there be an fix for squeeze and I just need to wait? Should I install an openssl update manually? How? I tried to install openssl-0.9.8za and openssl-1.0.1h with wget, ./config, make, make install but openssl version is still that same. I also tried config parameters but with this build fails.

  Read the article

• SQL Server Management Studio Reports: Why no open transactions?

  - by Sleepless

  On a server with several hundred user connections, when I open the SQL Server 2008 SP1 Management Studio report "Database - User Statistics", the result page shows the following results: Login Name: appUser Active Sessions: 243 Active Connections: 243 Open Transactions: 374 Still, when I open the report "Database - All Transactions" on the same DB, it doesn't show any connections ("Currently, there are no transactions running for [Database Name] Database"). What gives? Is this a bug in Management Studio? This is not the only report where this kind of behavious happens... Thanks all!

  Read the article

• How to stop receiving an error reading iCal invitations on Mac sent from Thunderbird?

  - by Matthew Rankin

  When I open an iCal invitation (Mail Attachment.ics file) in Mac Mail.app sent to me from someone using Thunderbird, I receive the following error: The only solution that I've found to date is to save the Mail Attachment.ics file somewhere like the Desktop, open it in a text editor, and delete the blank lines at the beginning and end of the file. This problem appears to only happen when I'm receiving invitations from people using Thunderbird under Windows. Does anyone know of a better way to solve this problem? Is this a bug in Apple iCal, or is Thunderbird not meeting the iCal spec? Configuration Information OS: Mac OS X 10.6.2 Mail Program: Mac Mail.app ver. 4.2 (1077) Calendar Program: Mac iCal.app ver 4.0.1 (1374)

  Read the article

• Corporate Wiki Organization - Technical Documentation

  - by Dave Jarvis

  Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Software Tools Web Browsers Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

  Read the article

• Certain users cannot get to my server

  - by Zeno

  I am finding more and more users that report they cannot reach my server (website or services). Their tracert from that user looks like this: Tracing route to domain.com [*.*.*.255] over a maximum of 30 hops: 1 * * * Request timed out. The server is up and functional and every else reports it is fine. But there are various users who cannot get to it. I have no firewall or anything that would block anyone. Yes, the last part of the server IP is 255. Could this be causing it? http://www.dslreports.com/forum/r18539206-Last-octet-255-bug-on-Windows Or would a certain ISP be denying traffic to my server? Or something on their router level?

  Read the article

• ESX 4.0 space: DASD, NAS, or ?

  - by thormj

  I put together an ESX box for better management, but its performance is a WTF item; I'm a noob at dealing with ESX, so I'm looking for a laundry-list of reading material to help me straighten this out so I can go back to .NET programming. Current storage system: We're running Raid5+Hotspare (8x500 GB spindles) on a PERC6i on a Dell 2910. Due to ESX limitatios, the PERC is showing the storage as 1x2TB + 1x800GB "partitions." I'm not sure of the setup's configuration (stride / stripe / ???) at all. Our Applications We have a SBS server as well as a minor (2x50 GB, but growing at 10GB/month) database server... Our application that lives on the database VM is CPU and I/O insense; it's a database churning excercise mixed in with a lot of computation on the data (fixing that performance is what I'm supposed to be working on)... Perfomance Issue When I do a backup, restore, or worse (copy a backup from 1 vm to another to move it to the QA VM), the entire system slows to a crawl (even "unrelated" VMs). I originally thought a DASD situation would be quite good since you had PCI-x bandwidth, but the systemwide slowdown is killing productivity. Questions What should I do to make an intelligent decision about NAS vs RAID vs SAN vs DASD? Are there sweet spots/ugly spots in the storage setup? Can you use a SSD PCI-X card in ESX for the tempdb? Good/Bad idea? Is there any way to "share" some image in a copy-on-write fashion? Most of the "Backup-Copy-Restore" is to "put a clean image on the dev boxes"; if I could have them "share" the master image, the "big copy" (2x50 GB) would only need to be done once per week instead of once per dev per week...[runtime performance isn't a concern with the dev boxes, but the backup/copy/restore kills production, SBS, and everything else on the box]

  Read the article

• CentOS iscsi initiator has session but there is no block device

  - by jcalfee314

  I have installed the scsi-target-utils package on CentOS and I used it to perform a discovery. The discovery did give me an active session. I restarted the iscsi service but I do not see any new devices (fdisk -l). I see in /var/log/messages that my connection is operational now. I'm not sure how to debug this further. Can someone direct me into fixing this? discovery: iscsiadm -m discovery -t sendtargets -p 192.168.0.155 returns: 192.168.0.155:3260,-1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 Just to verify it actually worked: iscsiadm -m session returns tcp: [1] 192.168.0.155:3260,1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 restarting as the directions say to do: service iscsi restart output written to /var/log/message Stopping iscsi: Sep 20 12:14:22 localhost kernel: connection1:0: detected conn error (1020) [ OK ] Starting iscsi: Sep 20 12:14:22 localhost kernel: scsi1 : iSCSI Initiator over TCP/IP Sep 20 12:14:22 localhost iscsid: Connection1:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is shutdown. Sep 20 12:14:22 localhost iscsid: Could not set session2 priority. READ/WRITE throughout and latency could be affected. [ OK ] [root@db iscsi]# Sep 20 12:14:23 localhost iscsid: Connection2:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is operational now Ran a login command: iscsiadm -m node -T iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 -p 192.168.0.155 -l No errors, no logging occurred. Next I compared the output from "fdisk -l|egrep dev" both with the iscsi session and without. There is no difference. I suppose I could just look in /etc/mtab. Any ideas on how I can get an iscsi device?

  Read the article

• Using LDAP as auth method for git repositories

  - by Lenni

  I want to convince my boss that we should be using git for version control. He says, that it absolutely must authenticate users through our central LDAP server. I looked at the various solutions (gitweb, gitorious ... ) and couln't really find a definitive answer about whether they support LDAP authentication. The only solution I could find a little info on was a Apache+mod_ldap setting. But that would mean that the user authenticating on LDAP wouldn't necessarily be the same as the actual git user, right? (Not that this is a huge problem, but just something which would bug me.) So, what's the best way to authenticate git users via LDAP?

  Read the article

• internal compiler error

  - by hyperboreean

  I am getting this message: internal compiler error: Segmentation fault Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.4/README.Bugs> for instructions. for every compilation that takes longer (ie: linux kernel, kde sources etc.) I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?

  Read the article

• Redirect input from one terminal to another

  - by Niki Yoshiuchi

  I have sshed into a linux box and I'm using dvtm and bash (although I have also tried this with Gnu screen and bash). I have two terminals, current /dev/pts/29 and /dev/pts/130. I want to redirect the input from one to the other. From what I understand, in /dev/pts/130 I can type: cat </dev/pts/29 And then when I type in /dev/pts/29 the characters I type should show up in /dev/pts/130. However what ends up happening is that every other character I type gets redirected. For example, if I type "hello" I get this: /dev/pts/29 | /dev/pts/130 $ | $ cat </dev/pts/29 $ el | hlo This is really frustrating as I need to do this in order to redirect the io of a process running in gdb (I've tried both run /dev/pts/# and set inferior-tty /dev/pts/# and both resulted in the aforementioned behavior). Am I doing something wrong, or is this a bug in bash/screen/dvtm?

  Read the article

• UAC prompt won't allow non-administrator to access IIS 7 Manager.

  - by Triynko

  The IIS 7 Manager seems to throw up a UAC prompt requiring administrative elevation as soon as the shortcut is clicked. This makes it impossible for a non-admin to use it. When I first created the user account, I could open IIS 7 Manager, but could not connect. I temporarily made the user account an Admin, then opened IIS 7 Manager again. Now that I've removed user from Admin, every time I open IIS 7 Manager it throws up the UAC prompt, making it impossible to do anything with it as a non-Admin. Is this a bug? Is there a way to reset the settings for this user so that IIS 7 Manager is back in some kind of first-run state?

  Read the article

• User authentication -- username mismatch in IIS in ASP.NET application

  - by Cory Larson

  Last week, an employee's Active Directory username was changed (or a new one was created for them). For the purposes of this example, let's assume these usernames: Old: Domain\11111 New: Domain\22222 When this user now logs in using their new username, and attempts to browse to any one of a number of ASP.NET applications using only Windows Authentication (no Anonymous enabled), the system authenticates but our next layer of database-driven permissions prevents them from being authorized. We tracked it down to a mismatch of usernames between their logon account and who IIS thinks they are. Below are the outputs of several ASP.NET variables from apps running in a Windows 2008 IIS7.5 environment: Request.ServerVariables["AUTH_TYPE"]: Negotiate Request.ServerVariables["AUTH_USER"]: Domain\11111 Request.ServerVariables["LOGON_USER"]: Domain\22222 Request.ServerVariables["REMOTE_USER"]: Domain\11111 HttpContext.Current.User.Identity.Name: Domain\11111 System.Threading.Thread.CurrentPrincipal.Identity.Name: Domain\11111 From the above, I can see that only the LOGON_USER server variable has the correct value, which is the account the user used to log on to their machine. However, we use the "AUTH_USER" variable for looking up the database permissions. In a separate testing environment (completely different server: Windows 2003, IIS6), all of the above variables show "Domain\22222". So this seems to be a server-specific issue, like the credentials are somehow getting cached either on their machine or on the server (the former seems more plausible). So the question is: how do I confirm whether it's the user's machine or the server that is botching the request? How should I go about fixing this? I looked at the following two resources and will be giving the first one a try shortly: http://www.interworks.com/blogs/jvalente/2010/02/02/removing-saved-credentials-passwords-windows-xp-windows-vista-or-windows-7 http://stackoverflow.com/questions/2325005/classic-asp-request-servervariableslogon-user-returning-wrong-username/5299080#5299080 Thanks.

  Read the article

• Why mutt terminates with segmentation error?

  - by hugemeow

  I pressed $, in order to sync mailbox, but mutt just quit... in fact mutt don't quit every time i press $, it only quits sometimes, so how to know the reason why mutt quit? is this a bug in mutt'? The error message is: Sorting mailbox... Segmentation fault Can i use strace with mutt if i want to know what happens? Or are there tools which are better to find out more about the problem? right now i replied to a mail, then i press $, then segmentation fault...

  Read the article

• How to talk to a virtual host on a guest OS?

  - by Bernd

  Let's say there is a host OS (Mac OS X) and a virtual machine running Ubuntu as guest OS. The guest OS has the IP 192.186.56.101 and some virtual hosts, e.g. ubuntu.server So, how to really map a request to the virtual host ubuntu.server on the guest OS? I tried: Configure the host OS in /etc/hosts to map ubuntu.server to 192.186.56.101 On the guest OS we have the trouble. It accepts the request for 192.186.56.101 which is not ubuntu.server and therefor the ubuntu.server virtual host will never be requested. Just the localhost on the guest OS. It might surely be possible to simply then use 192.168.56.101. But this would only work for one host per guest OS. Any idea? Or is there a bug in my train of thoughts?

  Read the article

• Google Apps claims my domain is registered but when I try to access it claims it is not

  - by user32953

  Hi all, we have registered one of our domains with Google Apps 2 years ago. However, we didn't even use it. Now if I try to access: http://google.com/a/mydomain.com What I see is: Server error Sorry, you've reached a login page for a domain that isn't using Google Apps. Please check the web address and try again. Then I go to Google Apps Standard Edition signup page and type mydomain.com. However, what I get is: This domain has already been registered with Google Apps. Please contact your domain administrator for instructions on using Google Apps with this domain. Is there anyone who can explain me what this inconsistency is caused by and what I can do? Since Google Apps Standard Edition doesn't grant me to contact with Google, I can't even submit a bug report. Any help would be appreciated.

  Read the article

• Can Vista Windows Explorer be repaired/fixed?

  - by gurun8

  I'm running Windows Vista Home Premium on a Sony Vaio laptop. I think somehow my Windows Explorer has become corrupted. I don't recall any certain inciting incident like installing an unreputable 3rd party app or hardware failure but just recently my system won't wake after it's been left idle longer that 20 minutes and goes to sleep. I've also had problems launch certain apps, like Adobe InDesign CS3, that just basically freeze the system but leave mouse movements functioning for a short time before freezing the entire system which requires a hard reboot to resolve the freeze. The system seems to run normally when used but I fear there's a looming possibility that this is a house of cards and will all come crashing down soon. My question is this, can Windows Explorer be repaired/fixed? Before reformatting the system and starting over, which is most likely what I'm going to be forced to do, I'd like explore (no pun intended) my options in fixing the problem with a patch or reinstall or something of that nature. Reformatting my system will eat up a day or two of my time and I just don't have the time to spare right now.

  Read the article

• Speakers silent, headphones work in Ubuntu 9.04

  - by CarlF

  I'm running Ubuntu 9.04. Worked fine for months, then I rebooted yesterday after weeks of continuous operation. Now audio won't play through the speakers. The USB headset works fine, but the Conexant audio (CX20549) does not. Weirdly, it thinks it's playing. pavumeter shows appropriate levels, volume looks OK in alsamixer, but no sound. I did find this page: http://www.eugeneteplitsky.com/fixing-silent-pulseaudio-in-ubuntu-9-04/ Unfortunately the advice there doesn't help me. For one thing, the syntax for the alsa-base.conf file is apparently not actually documented anywhere. For another, my chipset isn't listed in the kernel.org docs he links to! EDIT: would upgrading to 9.10 help? Is there a major change in the audio subsystem between 9.04 and 9.10? Any suggestions? EDIT 2: This is stranger than I thought. Sound works normally in Xine, but is silent in Audacity, VLC and mplayer. What the?

  Read the article

• How can I free files that are in use by quicklook?

  - by alex-auguste1

  I have a couple pictures I was looking through and deleting stuck in my trash (Mac OSX 10.6 latest) and finder tells me they are in use when I try to delete them. I looked around online and found the lsof command in terminal (type lsod with a space, drag the file onto terminal, press enter) it told me the file was in use by: COMMAND PID FD Finder 7747 txt Finder 7747 13r mdworker 8685 txt quicklook 8822 13r quicklook 8822 14r any idea what I can do about this? (other than restarting, this happens to me quite a bit), I'm wondering if this could be a bug as well. Thanks for any help.

  Read the article

• Wireless to Wireless Transfer Slow on a Linksys WRT54GL

  - by Kyle Brandt

  The Situation: When I try to transfer a file from one computer to another that are both connected via wireless on a WRT54GL (in a office) with dd-wrt firmware I often get bad speeds. In generally they average around 100 kilobytes a second. Either computer can download via wireless from the Internet at at about 2 megabytes a second. The speed is slow with the transfer of one large file. There are about 20 other wireless networks that the computers can see, so there is a lot of noise, but I don't have the equipment to really monitor the frequencies well. But that still seems pretty slow. I thought maybe it was the transmit on each card, but even when they are 5 feet away with a line of sight I still get these speeds. According to Linux both cards are operating at 54g. My Questions: Is this normal for this sort of consumer level wireless equipment? Anything I can do to improve it? why is wireless to wireless transfer slow when everything else isn't? Whats steps might I take to figure out what is happening? For example, are lots of packets not making to the access point requiring retransmissions? Above all, I want to find out what the problem actually is. This may seem odd, but at this point I am more interested in understanding what the problem is than fixing it. What I have tried: I have tried messing with lots of settings. Different channels, xmit power, G-Only, none of which has made anything any better. I've also tried upgrading to newer dd-wrt firmware version and doing a reset to wipe out the settings.

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >