Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 161/869 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

• Roundcube access from outside local network

  - by Mike K

  I have setup hmailserver on a windows xp pro computer and everything is working great when it comes to getting it to send and receive email. Now here is where my problem comes in... I have setup roundcube using uniserver and everything works great internally. Now, what I am trying to do is to be able to access roundcube from the internet outside of the local network. I have opened up ports 80, 443, and the mysql port yet I am still unable to access this from outside of the network. The error message that I am getting is as followed: Forbidden You don't have permission to access /webmail/ on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. I believe something needs to be edited in the apache config file. Any help would be greatly appreciated. I am hoping I dont need to run this on windows server but I'm kinda losing hope and thinking I will need to because I need IIS.

  Read the article

• IIS SEO Toolkit Available in 10 Languages

  - by The Official Microsoft IIS Site

  A couple of months ago I blogged about the release of the v1.0.1 of the IIS Search Engine Optimization Toolkit . In March we released the localized versions of the SEO Toolkit so now it is available in 10 languages: English, Japanese, French, Russian, Korean, German, Spanish, Chinese Simplified, Italian and Chinese Traditional. Here are all the direct links to download it. Name Language Download URL IIS SEO Toolkit 32bit english http://download.microsoft.com/download/A/C/A/ACA8D740-A59D-4D25-A2D5...(read more)

  Read the article

• Device cannot be added on software-raid-1 array on Ubuntu 12.04

  - by George Pligor

  Unfortunately all tutorials I have found online until now on how to setup software-raid-1 are outdated on ubuntu 12.40 My target is to setup it on a system with a secondary disk drive that is already running. Format is not an option! I am trying to follow and adapt from 11.10 to 12.04 the following tutorial: http://www.howtoforge.com/how-to-set-up-software-raid1-on-a-running-lvm-system-incl-grub2-configuration-ubuntu-11.10-p2 On the above tutorial there is a successful command which creates a raid-1 array by setting the first disk drive with the installed system as missing: mdadm --create /dev/md0 --level=1 --raid-disks=2 missing /dev/sdb1 But when the time comes to add the first main drive with the installed system on the raid-array with this command: mdadm --add /dev/md0 /dev/sda1 I receive an error message. The error message says that the device /dev/sda is (which makes sense) busy! Note: hardware raid solution is not available since the system is a laptop with two disk drives! Thank you

  Read the article

• Blocking a distributed, consistent spam attack? Could it be something more serious?

  - by mattmcmanus

  I will do my best to try and explain this as it's strange and confusing to me. I posted a little while ago about a sustained spike in mysql queries on a VPS I had recently setup. It turned out to be a single post on a site I was developmenting. The post had over 30,000 spam comments! Since the site was one I was slowly building I hadn't configured the anti-spam comment software yet. I've since deleted the particular post which has given the server a break but the post's url keeps on getting hit. The frustrating thing is every hit is from a different IP. How do I even start to block/prevent this? Is this even something I need to worry about? Here are some more specific details about my setup, just to give some context: Ubuntu 8.10 server with ufw setup The site I'm building is in Drupal which now has Mollom setup for spam control. It wasn't configured before. The requests happen inconsistently. Sometimes it's every couple seconds and other times it's a an or so between hits. However it's been going on pretty much constantly like that for over a week. Here is a sample of my apache access log from the last 15 minutes just for the page in question: dev.domain-name.com:80 97.87.97.169 - - [28/Mar/2010:06:47:40 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 202.149.24.193 - - [28/Mar/2010:06:50:37 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 193.106.92.77 - - [28/Mar/2010:06:50:39 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 194.85.136.187 - - [28/Mar/2010:06:52:03 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 220.255.7.13 - - [28/Mar/2010:06:52:14 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 195.70.55.151 - - [28/Mar/2010:06:53:41 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 71.91.4.31 - - [28/Mar/2010:06:56:07 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 98.209.203.170 - - [28/Mar/2010:06:56:10 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 24.255.137.159 - - [28/Mar/2010:06:56:19 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 77.242.20.18 - - [28/Mar/2010:07:00:15 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 94.75.215.42 - - [28/Mar/2010:07:01:34 +0000] "POST /comment/reply/3 HTTP/1.0" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 89.115.2.128 - - [28/Mar/2010:07:03:20 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 75.65.230.252 - - [28/Mar/2010:07:05:05 +0000] "POST http://dev.domain-name.com/comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 206.251.255.61 - - [28/Mar/2010:07:06:46 +0000] "POST /comment/reply/3 HTTP/1.0" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" dev.domain-name.com:80 213.194.120.14 - - [28/Mar/2010:07:07:22 +0000] "POST /comment/reply/3 HTTP/1.1" 404 5895 "http://dev.domain-name.com/blog/2009/11/23/another" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" I understand this is an open ended question, but any help or insight you could give would be much appreciated.

  Read the article

• iproute2 rules and iptables NAT... what is the difference?

  - by Jakobud

  We have 2 different ISP connections. Our previous "IT guy" setup our firewall like so: When /etc/rc.local was executed on startup, it did a bunch of ip rule add and ip route add commands in order to route certain internal hosts to use certain ISP connections. Then at the end of /etc/rc.local, he executed our iptables firewall rules that were generated by Firewall Builder. These iptables rules have both Policy and NAT rules setup in them. What I don't understand, is why did he use iproute2 to specify rules and routes but also specify NAT rules for iptables? Why didn't he just do it all in one or the other instead of using them both? Could he have got rid of the iproute2 rules and routes and just put all those same rules into the iptables NAT settings?

  Read the article

• How to use Huawei EC169 CDMA USB modem?

  - by smasadat

  How do you setup and use this modem in Ubuntu?

  Read the article

• JavaCV IplImage to LWJGL Texture

  - by rendrag

  As a side project I've been attempting to make a dynamic display (for example a screen within a game) that shows images from my webcam. I've been messing around with JavaCV and LWJGL for the past few months and have a basic understanding of how they both work. I found this after scouring google, but I get an error that the ByteBuffer isn't big enough. IplImage img = cam.getFrame(); ByteBuffer buffer = img.asByteBuffer(); int textureID = glGenTextures(); //Generate texture ID glBindTexture(GL_TEXTURE_2D, textureID); //Bind texture ID //I don't know how much of the following is necessary //Setup wrap mode glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL12.GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL12.GL_CLAMP_TO_EDGE); //Setup texture scaling filtering glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); //Send texture data to OpenGL - this is the line that actually does stuff and that OpenGL has a problem with glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, width, height, 0, GL12.GL_BGR, GL_UNSIGNED_BYTE, buffer); That last line throws this- Exception in thread "Thread-0" java.lang.IllegalArgumentException: Number of remaining buffer elements is 144, must be at least 921600. Because at most 921600 elements can be returned, a buffer with at least 921600 elements is required, regardless of actual returned element count at org.lwjgl.BufferChecks.throwBufferSizeException(BufferChecks.java:162) at org.lwjgl.BufferChecks.checkBufferSize(BufferChecks.java:189) at org.lwjgl.BufferChecks.checkBuffer(BufferChecks.java:230) at org.lwjgl.opengl.GL11.glTexImage2D(GL11.java:2845) at tests.TextureTest.getTexture(TextureTest.java:78) at tests.TextureTest.update(TextureTest.java:43) at lib.game.AbstractGame$1.run(AbstractGame.java:52) at java.lang.Thread.run(Thread.java:679)

  Read the article

• Tools to test multicast routing

  - by Zoredache

  I am looking for a good simple tool that runs on a standard OS (Windows or Linux) that I can used to test that multicast is being passed properly by a router. I have been asked by a client to enable multicast routing on a Linux box acting as their router since their phone system requires multicast to for a few features. Since I am not physically near the client I don't really have the ability to experiment with the various methods for setting up multicast routing on Linux. I can setup a router at my desk that is identical to what is deployed on their network, but I don't know of any good simple tools that I can use to generate or listen for multicast traffic. The one mulicast tool I have found is mcast.exe tool which is part of the Windows 2000/2003 resource kit. From what I have read online it seems that mcast.exe does not work across a router, and only works on the local network, so that doesn't seem to be useful for me to test multicast routing. So what do tool(s) do you use to test that multicast routing is properly setup?

  Read the article

• Postfix virtual_alias stealing emails from virutal_mailbox

  - by drewag

  I am trying to setup a "catchall" address. In my virtual_mailbox table I have emails setup like so: select * from virtual_users; id | domain_id | password | email ----+-----------+---------------------------------------------- 3 | 1 | ***************** | [email protected] 4 | 1 | ***************** | [email protected] That works great on its own. When I try to add a virtual alias for the catchall: select * from virtual_aliases; id | domain_id | source | destination ----+-----------+-------------------+--------------------------- 1 | 1 | @domain.com | [email protected] Once I add that virtual_alias, all email is going to catchall and I can send any to [email protected]. Is there something I need to do to shift around the priority? This is what I am getting in my postfix logs: Oct 20 23:24:26 localhost postfix/qmgr[8002]: C23A711DF9: from=<[email protected]>, size=1712, nrcpt=1 (queue active) Oct 20 23:24:26 localhost postfix/lmtp[8148]: C23A711DF9: to=<[email protected]>, orig_to=<[email protected]>, relay=domain.com[private/dovecot-lmtp], delay=0.42, delays=0.4/0.01/0.01/0.01, dsn=2.0.0, status=sent (250 2.0.0 <[email protected]> 8V9DA4q6ZFLVHwAA0J78UA Saved) Oct 20 23:24:26 localhost postfix/qmgr[8002]: C23A711DF9: removed

  Read the article

• Magento - Users unable to login from corporate networks with Bluecoat / F5 Load balancers

  - by user1330440

  Hoping someone has come across this issue before with Magento and corporate clients. We have two clients for our Magento site who both have their internal networks setup using bluecoat security devices and F5 load balancers. Some users within these networks are unable to login to Magento - Magento eventually is sending a 302 redirect to /index.php/ when users attempt to log in. Through our testing, the problem appears to be isolated to this setup - we can log into the accounts in question from anywhere outside of these networks without issue, and if the client tries to access the site without going through the F5 load balancer, they are able to log in successfully. Strangely enough, the issue only started occurring for the two sites the day after we introduced a system upgrade which added a new site to the Magento installation. The system upgrade should not have affected any standard login functionality, and as said, the problem does not appear to be with the users in question, but with where the users are accessing the site from. Initially we thought the issue might have something to do with communications between the client's networks and the network which the server was hosted on, so we've tried moving the server to different hosts, but this has not helped. I'm currently waiting for more info from the clients on exact devices / models used in their network setup. I will update this post if more information becomes avaliable. Magento version is enterprise edition of ver. 1.9.0.0 Does anyone know of any tucked away Magento settings that might be able to cause this kind of behavior? Experience with this kind of set-up and ideas for things to look at? All help and ideas for things to follow-up would be appreciated - as this is a current production issue for a large number of users. I will respond asap with any requests for additional information on the topic, but currently am not able to disclose any identifying information on the project in question, and/or the clients experiencing issues. Thanks in advance for any assistance offered :) Note: This question has also been posted on the Magento forums: http://www.magentocommerce.com/boards/viewthread/277917/ And also on Stack overflow (Moved here as a commenter thought this site may be better suited): http://stackoverflow.com/questions/10133978/magento-users-unable-to-login-from-corporate-networks-with-bluecoat-f5-load

  Read the article

• Linux SW Raid: whole disk or per-partition?

  - by Steve Pomeroy

  I have inherited a machine which has 2 physical disks and uses Linux SW RAID(1). Both disks are partitioned and are are all individual arrays (/dev/md0, /dev/md6, etc.). Those arrays are then mounted (/boot, /home, etc. even /tmp). As RAID is designed to mitigate physical failures, is there any reason why one would use this technique over whole-disk arrays that are then partitioned (perhaps using LVM)? This seems prone to more potential issues, but may have some special properties that I haven't been able to glean. I'm planning on moving this setup to: disks?SWRAID(1)?LVM as I'll be making multiple VMs out of the one machine, but wanted to make sure I knew what I was doing when I got rid of the old setup.

  Read the article

• Dynamips Virtual Router not pinging external host after bridging

  - by maiky

  I have setup a virtual router image with dynamips and setup bridging between tap0 interface of the virtual router and eth0 and br0 with commands [root@cisco_host]# brctl addbr br0 [root@cisco_host]# ifconfig br0 up [root@cisco_host]# ifconfig eth1 0.0.0.0 [root@cisco_host]# brctl addif br0 eth1 [root@cisco_host]# ifconfig br0 192.168.0.100 netmask 255.255.255.0 up In dynagen configuration I have: f0/0 = NIO_tap:tap0 So, [root@cisco_host]# brctl addif br0 tap0 [root@cisco_host]# ifconfig tap0 up router(config)#int fa0/0 router(config-if)#ip address 192.168.0.101 255.255.255.0 router(config-if)#no shutdown After the configuration above I was expecting that from inside the router I could ping an external machine with IP 192.168.0.1 Actually from the host I can ping the external host 192.168.0.1 as well as 192.168.0.100 and 192.168.0.101. So what am I missing here? tap0 is bridged with br0 and in turn with eth1. So why the router is not pingable from 192.168.0.1 and vice-versa??

  Read the article

• What am I (a beginner) losing, by choosing Cherokee over Apache for serving dynamic content?

  - by Bad Learner

  I am a complete beginner and am planning to setup a photo sharing site. This is the setup I am planning, basically for a start - - Cherokee (instead of Apache) for serving dynamic content (python-based application), and Nginx for serving static files. Since, I am a beginner, what have I, to lose? So, can someone, from your experience, please tell me, what I'd lose by choosing Cherokee over Apache for serving dynamic content in PHP/Python/whatever? Anything other than the fact that there's lot of documentation, many people who can help when there's an issue etc as Apache is well established and the most popular web server? Again, my intention is not to spurt a flame war here. Just wanted to know if Cherokee would be better than Apache in terms of performance, reliability, and speed, when it matters (peak load times). Also, I heard it's a lot faster than Apache in serving dynamic content, is it true?

  Read the article

• slow network in centos5 VM with centos5 host running KVM

  - by dan

  I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

  Read the article

• bash completion with aliases

  - by dstarh

  I have a bunch of bash completion scripts set up (mostly using bash-it and some manually setup). I also have a bunch of aliases setup for common tasks like gco for git checkout. Right now I can type git checkout d tab and develop is completed for me but when I type gco d tab it does not complete. I'm assuming this is because the completion script is completing on git and it fails to see gco. Is there a way to generically/programmatically get all of my completion scripts to work with my aliases? Not being able to complete when using the alias kind of defeats the purpose of the alias.

  Read the article

• Error when installing SQL Server 2008 R2 Express

  - by dretzlaff17

  When installing SQL Server 2008 R2 from the command line prompt, I am getting the following error that is recorded in the Summary file. Scenario specific rules: Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20101217_131444\SystemConfigurationCheck_Report.htm Exception summary: The following is an exception stack listing the exceptions in outermost to innermost order Inner exceptions are being indented Exception type: System.ArgumentNullException Message: Value cannot be null. Parameter name: path2 Data: DisableWatson = true Stack: at System.IO.Path.Combine(String path1, String path2) at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPublic.RecomputeDirectoryPaths() at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineSetupPublic.Calculate() at Microsoft.SqlServer.Configuration.SetupExtension.FinalCalculateSettingsAction.ExecuteAction(String actionId) at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream) at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun) Has anyone seen this. Here is what I am sending for the command line parameters. /q /ACTION=Install /FEATURES=SQLEngine /SECURITYMODE=SQL /SAPWD="myPassword" /BROWSERSVCSTARTUPTYPE=Automatic /SQLSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\Network Service" /SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS" /AGTSVCACCOUNT="NT AUTHORITY\Network Service" /IACCEPTSQLSERVERLICENSETERMS

  Read the article

• SQL SERVER – Download SQL Server Product Documentation

  - by pinaldave

  Today I just returned from Bangalore User Group Meeting. Attending User Group meeting is indeed fun and really great experience. The best part of the User Group is meeting like minded people and have a great conversation with them. During the meeting I was asked why one has to go online to access SQL Server Product Documentation. I can clearly see there can be many reasons for why one wants the documentation to be available offline. The reasons can be anything but not limited to Company Firewall No Internet (power failure, on road or disaster) Internet Bandwidth Limitatoin Company Proxy Issues … and much more… In this kind of situation one needs documentation which is offline and easily available in local computer. The Microsoft SQL Server 2012 setup installs only the Help Viewer and related components for managing Help settings. Setup does not directly install any documentation. All of the SQL Server documentation is available online. Well, Microsoft has recently released Production Documentation available for offline users as well. You just have to download the executable file and follow all the instructions. Please follow the link below for download of the file. There is detailed instruction on how to download and install the documentation offline. Product Documentation for Microsoft SQL Server 2012 Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How to queue up Windows 8 file coping to only have one copying at a time

  - by Valamas

  The new windows 8 file explorer copying is great. I can setup multiple copying tasks. They appear in a single window and I am able to pause them. Is there a way to have the copying only occur one at a time and when complete to progress the next one? Currently I have to setup the file copy and pause subsequent ones, then unpause the next one when I notice the current one finishes. I am only asking about a way to queue the file explorer coping and not use alternative tools like robocopy.

  Read the article

• Can you set up a gaming LAN using OpenVPN installed in a VMware guest OS and be playing the game on the host OS?

  - by Coder

  I would like to setup a gaming VPN. Ie. I have some games that work over LAN and would like to play them with people that are not on my LAN. I know I can do this with OpenVPN. My ultimate goal would be to run OpenVPN portably on my host OS and not even need any virtualization. As such i don't want to install it on my host, but i'm fine with running it portably. I'm even fine with temporarily adding registry keys, and then running a .reg file to remove these entries once i'm done. To this effect i have installed OpenVPN on a virtual machine and diffed the registry. I then manually (using a .reg file) added all the keys that seem important on my host OS and copied the installation folder of OpenVPN onto my host machine. Then i try to run openVPN GUI 1.0.3 as a test and it says "Error opening registy for reading (HKLM\SOFTWARE\OpenVPN). OpenVPN is probably not installed". I verified that that key is indeed in the registry with all subkeys and it looks correct. I have tried running the GUI as an administrator and in compatibility mode with no success. I am running Windows 7. If this fails then i would be happy with installing OpenVPN on a virtual machine in VMWare but they key is that i will be running the game installed on my host machine. The first question for this option is if this is even possible. The second is, that I can't get the VM to have internet access if I use bridging but i can if i use NAT. Is it possible to do this game VPN setup with VMWare guest OS running using NAT? Summary of questions: -Is it possible to run openVPN portably and if so what did i miss above? -If it's not possible to run it portably, then can setup a gaming LAN by installing OpenVPN in a guest OS with NAT and how can i do this? -If the above is not possible then can i install OpenVPN in a guest using bridging and if so how can i set this up with a Windows 7 host and Windows XP guest as currently i can't get the guest to be able to access the internet in bridging mode, but it working in NAT mode. -In general is there any good documentation on setting up a gaming LAN with OpenVPN (i am using 2.1.4) as i have never set up a VPN of any sort before so any help would be much appreciated. Thanks!

  Read the article

• pfsense multi-site VPN VOIP deployment

  - by sysconfig

  have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

  Read the article

• Missing "log on to" field in Windows 2008 password change dialog

  - by Dmitri Chubarov

  I have to setup an embedded standalone CIFS server outside of domain environment. I shall refer to the server as storage_gateway. The default password setting for the Administrator account is Password must be changed. Until Administrator password is changed other local accounts are disabled. While the server is on default password connecting to a share causes fails with NT_STATUS_PASSWORD_MUST_CHANGE error. $ smbclient -L //storage_gateway -U Administrator session setup failed: NT_STATUS_PASSWORD_MUST_CHANGE I have a mixed Linux/Windows environment and prefer smbclient for diagnostics. To change the password in Windows 2003 Server I could press CTRL-ALT-DEL to get into the Windows Security window and change password for the remote server specifying the server name or ip address (xx.xx.xx.xx) in the system password change dialog. (the name root is just an example, I have edited the dialogs to translate them) However in Windows 2008 the corresponding dialog lacks the Log on to field. Is there a way to change a remote password in Windows 2008 Server/Windows 7?

  Read the article

• Apache configuration for silent rewrite of query strings like codeigniter

  - by jwir3

  Codeigniter rewrites query strings like the following: http://somedomain.com/index.php?q=something to become: http://somedomain.com/index.php/q/something I'd like to imitate this behavior on a (very) lightweight website I am developing for a wedding RSVP system. I don't want the bloat of codeigniter, nor do I need anything else that it provides. The only thing I'd like is this. Unfortunately, I don't know how to setup a mod-rewrite rule that accomplishes this. I can setup a rule that translates /q/something into ?q=something, but I can't get one that does that without changing the URL the user is viewing. I'm basically looking for something that is, in effect, a "silent" version of the rewrite. That is, I want something that rewrites q/something to ?q=something, but leaves the user's URL in their address bar as q/something. Thanks in advance!

  Read the article

• Nginx & Passenger - failed (11: Resource temporarily unavailable) while connecting to upstream

  - by Toby Hede

  I have an Nginx and Passenger setup that is proving problematic. At relatively low loads the server seems to get backed up and start churning results like this into the error.log: connect() to unix:/passenger_helper_server failed (11: Resource temporarily unavailable) while connecting to upstream My passenger setup is: passenger_min_instances 2; passenger_pool_idle_time 1200; passenger_max_pool_size 20; I have done some digging, and it looks like the CPU gets pegged. Memory usage seems fine passenger_memory_stats shows at most about 700MB being used, but CPU approaches 100%. is this enough to cause this type of error? Should i bring the pool size down? Are there other configuration settings I should be looking at? Any help appreciated Other pertinent information: Amazon EC2 Small Instance Ubuntu 10.10 Nginx (latest stable) Passenger (latest stable) Rails 3.0.4

  Read the article

• how to connect only ethernet and only wireless hosts together

  - by Ashok Das

  Here is my problem. I have an android tablet that have only WiFi for network connectivity and I have a windows server that have only Ethernet ports for network connection. Now I want to telnet to my server from my tablet. I think some wireless to Ethernet converter required in between. I am planning to use Buffalo Air Station WCR-GN or TP-LINK TL-WR740N or TL-WR702N. The connection setup should be like this: [server]<---Ethernet---[WIFI router]<---wireless---[Tablet]. Now I am in doubt will this setup work? Anybody please help me with this. Regards Ashok

  Read the article

• Bind9 virtual subdomains

  - by Steffan

  I am trying to setup virtual subdomains using Bind9, following this tutorial.. http://groups.drupal.org/node/16862 which I've completed. Basically setting up the zone and modifying the resolv.conf file and the named.conf.local file. I've gotten everything to work, and I am able to from my server ping mydomain.com , test.mydomain.com and when i do a dig I get the following.. ; <<>> DiG 9.7.0-P1 <<>> test.mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 32606 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1 ;; QUESTION SECTION: ;test.mydomain.com. IN A ;; ANSWER SECTION: test.mydomain.com. 86400 IN A 174.###.###.# ;; AUTHORITY SECTION: mydomain.com. 86400 IN NS mydomain.com. ;; ADDITIONAL SECTION: mydomain.com. 86400 IN A 174.###.###.# ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Wed Jan 19 21:06:01 2011 ;; MSG SIZE rcvd: 86 So it looks like everything is working. However, when I try and do test.mydomain.com in the browser, expecting it to default for now to mydomain.com it does not work and I get a server not found page in Firefox. I did read elsewhere that in your virutalhosts file you also need to setup a *.mydomain.com alias, but that didn't fix anything. Any other information that I could provide to help troubleshoot, or any troubleshooting suggestions? I am using Ubuntu 10.4, with typical LAMP setup. The only other things installed on the server are Bind9 and ftp client.

  Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >