Search Results

Search found 5462 results on 219 pages for 'continue'.

Page 169/219 | < Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >

• "One or more breakpoints cannot be set and have been disabled. Execution will stop at the beginning

  - by sam

  I set a breakpoint in my code in Visual-C++, but when I run, I see the error mentioned in the title. I know this question has been asked before on Stack Overflow (http://stackoverflow.com/questions/657470/breakpoints-cannot-be-set-and-have-been-disabled-problem), but none of the answers there fully explained the problem I'm seeing. The closest I can see is something about the linker, but I don't understand that - so if someone could explain in more detail that would be great. In my case, I have 2 projects in Visual C++ - the production dsw, and the test code dsw. I have loaded and rebuilt both dsws in debug mode. I want a breakpoint in the production code, which is run via the test scripts. My issue is I get the error message when I run the test code, because the break point is in the production code, which isn't loaded up when the test starts. Near the beginning of the test script there is a mytest_initialize() command. I imagine this goes off and loads up the production dll. Once this line has executed, I can put the breakpoint in my production code and run until I hit it. But it's quite annoying to have to run to this line, set the breakpoint and continue every time I want to run the test. So I think the problem is Visual C++ doesn't realise the two projects are related. Is this a linker issue? What does the linker do and what settings should I change to make this work? Thanks in advance. Apologies if instead I should be appending this question to the existing one, this is my first post so not quite sure how this should work.

  Read the article

• Screen information while Windows system is locked (.NET)

  - by Matt

  We have a nightly process that updates applications on a user's pc, and that requires bringing the application down and back up again (not looking to get into changing that process). The problem is that we are building a Windows AppBar on launch which requires a valid screen, and when the system is locked there isn't one in the Screen class. So none of the visual effects are enabled and it shows up real ugly. The only way we currently have around this is to detect a locked screen and just spin and wait until the user unlocks the desktop, then continue launching. Leaving it down isn't an option, as this is a key part of our user's workflow, and they expect it to be up and running if they left it that way the night before. Any ideas?? I can't seem to find the display information anywhere, but it has to be stored off someplace, since the user is still logged in. The contents of the Screen.AllScreens array: ** When Locked: Device Name : DISPLAY Primary : True Bits Per Pixel : 0 Bounds : {X=-1280,Y=0,Width=2560,Height=1024} Working Area : {X=0,Y=0,Width=1280,Height=1024} ** When Unlocked: Device Name : \\.\DISPLAY1 Primary : True Bits Per Pixel : 32 Bounds : {X=0,Y=0,Width=1280,Height=1024} Working Area : {X=0,Y=0,Width=1280,Height=994} Device Name : \\.\DISPLAY2 Primary : False Bits Per Pixel : 32 Bounds : {X=-1280,Y=0,Width=1280,Height=1024} Working Area : {X=-1280,Y=0,Width=1280,Height=964}

  Read the article

• function returns after an XMLHttpRequest

  - by ashays

  Alright, I know questions like this have probably been asked dozens of times, but I can't seem to find a working solution for my project. Recently, while using jQuery for a lot of AJAX calls, I've found myself in a form of callback hell. Whether or not jQuery is too powerful for this project is beyond the scope of this question. So basically here's some code that shows what's going on: function check_form(table) { var file = "/models/"+table+".json"; var errs = {}; var xhr = $.getJSON(file, function(json) { for (key in json) { var k = key; var r = json[k]; $.extend(errs, check_item("#"+k,r)); } }); return errs; } And... as you can probably guess, I get an empty object returned. My original idea was to use some sort of onReadyStateChange idea that would return whenever the readyState had finally hit 4. This causes my application to hang indefinitely, though. I need these errors to decide whether or not the form is allowed to submit or not (as well as to tell the user where the errors are in the application. Any ideas? Edit. It's not the prettiest solution, but I've managed to get it to work. Basically, check_form has the json passed to it from another function, instead of loading it. I was already loading it there, too, so it's probably best that I don't continue to load the same file over and over again anyways. I was just worried about overloading memory. These files aren't absolutely huge, though, so I guess it's probably okay.

  Read the article

• Programming help Loop adding

  - by Deonna

  I know this probably really simple but Im not sure what im doing wrong... The assignment states: For the second program for this lab, you are to have the user enter an integer value in the range of 10 to 50. You are to verify that the user enters a value in that range, and continue to prompt him until he does give you a value in that range. After the user has successfully entered a value in that range, you are to display the sum of all the integers from 1 to the value entered. I have this so far: #include <iostream.h> int main () { int num, sum; cout << "do-while Loop Example 2" << endl << endl; do { cout << "Enter a value from 10 to 50: "; cin >> num; if (num < 10 || num > 50) cout << "Out of range; Please try again..." << endl; } while (num < 10 || num > 50); { int i; int sum = 0; for (num = 1; num <= 50; num ++) sum = sum + num; } cout << endl << "The sum is " << sum << endl; return 0; } Im just not sure exactly what i'm doing wrong... I keep getting the wrong sum for the total...

  Read the article

• Query next/previous record

  - by Rob

  I'm trying to find a better way to get the next or previous record from a table. Let's say I have a blog or news table: CREATE TABLE news ( news_id INT UNSIGNED NOT NULL PRIMARY KEY AUTO_INCREMENT, news_datestamp DATETIME NOT NULL, news_author VARCHAR(100) NOT NULL, news_title VARCHAR(100) NOT NULL, news_text MEDIUMTEXT NOT NULL ); Now on the frontend I want navigation buttons for the next or previous records, if i'm sorting by news_id, I can do something rather simple like: SELECT MIN(news_id) AS next_news_id FROM news WHERE news_id > '$old_news_id' LIMIT 1 SELECT MAX(news_id) AS prev_news_id FROM news WHERE news_id < '$old_news_id' LIMIT 1 But the news can be sorted by any field, and I don't necessarily know which field is sorted on, so this won't work if the user sorts on news_author for example. I've resorted to the rather ugly and inefficient method of sorting the entire table and looping through all records until I find the record I need. $res = mysql_query("SELECT news_id FROM news ORDER BY `$sort_column` $sort_way"); $found = $prev = $next = 0; while(list($id) = mysql_fetch_row($res)) { if($found) { $next = $id; break; } if($id == $old_news_id) { $found = true; continue; } $prev = $id; } There's got to be a better way.

  Read the article

• How can I run Ruby specs and/or tests in MacVim without locking up MacVim?

  - by Henry

  About 6 months ago I switched from TextMate to MacVim for all of my development work, which primarily consists of coding in Ruby, Ruby on Rails and JavaScript. With TextMate, whenever I needed to run a spec or a test, I could just command+R on the test or spec file and another window would open and the results would be displayed with the 'pretty' format applied. If the spec or test was a lengthy one, I could just continue working with the codebase since the test/spec was running in a separate process/window. After the test ran, I could click through the results directly to the corresponding line in the spec file. Tim Pope's excellent rails.vim plugin comes very close to emulating this behavior within the MacVim environment. Running :Rake when the current buffer is a test or spec runs the file then splits the buffer to display the results. You can navigate through the results and key through to the corresponding spot in the file. The problem with the rails.vim approach is that it locks up the MacVim window while the test runs. This can be an issue with big apps that might have a lot of setup/teardown built into the tests. Also, the visual red/green html results that TextMate displays (via --format pretty, I'm assuming) is a bit easier to scan than the split window. This guy came close about 18 mos ago: http://cassiomarques.wordpress.com/2009/01/09/running-rspec-files-from-vim-showing-the-results-in-firefox/ The script he has worked with a bit of hacking, but the tests still ran within MacVim and locked up the current window. Any ideas on how to fully replicate the TextMate behavior described above in MacVim? Thanks!

  Read the article

• What are the differences between mapping,binding and parsing?

  - by sfrj

  I am starting to learn web-services in java EE6. I did web development before, but never nothing related to web services. All is new to me and the books and the tutorials i find in the web are to technical. I started learning about .xsd schemas and also .xml. In that topic i feel confident, i understand what are the schemas used for and what validation means. Now my next step is learning about JAX-B(Java Api for XML Binding). I rode some about it and i did also some practice in my IDE. But i have lots of basic doubts, that make me stuck and cannot feel confident to continue to the next topic. Ill appreciate a lot if someone could explain me well my doubts: What does it mean mapping and what is a mapping tool? What does it mean binding and what is a binding tool? What does it mean parsing and what is a parsing tool? How is JAX-B related to mapping,binding and parsing? I am seeking for a good answer built by you, not just a copy paste from google(Ive already been online a few hours and only got confused).

  Read the article

• Storyboard Bug - iOS 5.1 - Xcode 4.3.3

  - by user1505431

  In my iOS project (using xcode only), I continue to run into a problem where layout presented to me in the storyboard editor becomes automatically modified after some change (which I have not been able to specifically determine). The problem is as follows: The TabBarController has for whatever reason started displaying in landscape orientation. Some of the NavigationControllers have also done the same thing. I can no longer see or edit the navigation bar on my nested views. I can no longer see of edit the tab bar on the views of the resp. tab bar items. Everything works properly when I run the app in my simulator. If I had set it up prior to this change in default display settings, it still works just fine. Here is a screen shot of the problem: My storyboard has consistently presented me with this bug throughout the course of my project. I have fixed it once by resetting via git and another time by rebuilding the entire storyboard. Both solutions worked for an extended period of time, but I would rather have a permanent solution. Any input would be helpful.

  Read the article

• Python: Most efficient way to concatenate and rearrange files

  - by user300890

  Hi, I am reading from several files, each file is divided into 2 pieces, first a header section of a few thousand lines followed by a body of a few thousand. My problem is I need to concatenate these files into one file where all the headers are on the top followed by the body. Currently I am using two loops; one to pull out all the headers and write them, and the second to write the body of each file (I also include a tmp_count variable to limit the number of lines to be loading into memory before dumping to file). This is pretty slow - about 6min for 13gb file. Can anyone tell me how to optimize this or if there is a faster way to do this in python ? Thanks! Here is my code: def cat_files_sam(final_file_name,work_directory_master,file_count): final_file = open(final_file_name,"w") if len(file_count) > 1: file_count=sort_output_files(file_count) # only for @ headers for bowtie_file in file_count: #print bowtie_file tmp_list = [] tmp_count = 0 for line in open(os.path.join(work_directory_master,bowtie_file)): if line.startswith("@"): if tmp_count == 1000000: final_file.writelines(tmp_list) tmp_list = [] tmp_count = 0 tmp_list.append(line) tmp_count += 1 else: final_file.writelines(tmp_list) break for bowtie_file in file_count: #print bowtie_file tmp_list = [] tmp_count = 0 for line in open(os.path.join(work_directory_master,bowtie_file)): if line.startswith("@"): continue if tmp_count == 1000000: final_file.writelines(tmp_list) tmp_list = [] tmp_count = 0 tmp_list.append(line) tmp_count += 1 final_file.writelines(tmp_list) final_file.close()

  Read the article

• Ruby: how does constant-lookup work in instance_eval/class_eval?

  - by Alan O'Donnell

  I'm working my way through Pickaxe 1.9, and I'm a bit confused by constant-lookup in instance/class_eval blocks. I'm using 1.9.2. It seems that Ruby handles constant-lookup in *_eval blocks the same way it does method-lookup: look for a definition in receiver.singleton_class (plus mixins); then in receiver.singleton_class.superclass (plus mixins); then continue up the eigenchain until you get to #<Class:BasicObject>; whose superclass is Class; and then up the rest of the ancestor chain (including Object, which stores all the constants you define at the top-level), checking for mixins along the way Is this correct? The Pickaxe discussion is a bit terse. Some examples: class Foo CONST = 'Foo::CONST' class << self CONST = 'EigenFoo::CONST' end end Foo.instance_eval { CONST } # => 'EigenFoo::CONST' Foo.class_eval { CONST } # => 'EigenFoo::CONST', not 'Foo::CONST'! Foo.new.instance_eval { CONST } # => 'Foo::CONST' In the class_eval example, Foo-the-class isn't a stop along Foo-the-object's ancestor chain! And an example with mixins: module M CONST = "M::CONST" end module N CONST = "N::CONST" end class A include M extend N end A.instance_eval { CONST } # => "N::CONST", because N is mixed into A's eigenclass A.class_eval { CONST } # => "N::CONST", ditto A.new.instance_eval { CONST } # => "M::CONST", because A.new.class, A, mixes in M

  Read the article

• How to organize and manage multiple database credentials in application?

  - by Polaris878

  Okay, so I'm designing a stand-alone web service (using RestLET as my framework). My application is divided in to 3 layers: Data Layer (just above the database, provides APIs for connecting to/querying database, and a database object) Object layer (responsible for serialization from the data layer... provides objects which the client layer can use without worrying about database) Client layer (This layer is the RestLET web service... basically just creates objects from the object layer and fulfills webservice request) Now, for each object I create in the object layer, I want to use different credentials (so I can sandbox each object...). The object layer should not know the exact credentials (IE the login/pw/DB URL etc). What would be the best way to manage this? I'm thinking that I should have a super class Database object in my data layer... and each subclass will contain the required log-in information... this way my object layer can just go Database db = new SubDatabase(); and then continue using that database. On the client level, they would just be able to go ItemCollection items = new ItemCollection(); and have no idea/control over the database that gets connected. I'm asking this because I am trying to make my platform extensible, so that others can easily create services off of my platform. If anyone has any experience with these architectural problems or how to manage this sort of thing I'd appreciate any insight or advice... Feel free to ask questions if this is confusing. Thanks! My platform is Java, the REST framework I'm using is RestLET, my database is MySQL.

  Read the article

• curl_multi_exec stops if one url is 404, how can I change that?

  - by Rob

  Currently, my cURL multi exec stops if one url it connects to doesn't work, so a few questions: 1: Why does it stop? That doesn't make sense to me. 2: How can I make it continue? EDIT: Here is my code: $SQL = mysql_query("SELECT url FROM shells") ; $mh = curl_multi_init(); $handles = array(); while($resultSet = mysql_fetch_array($SQL)){ //load the urls and send GET data $ch = curl_init($resultSet['url'] . $fullcurl); //Only load it for two seconds (Long enough to send the data) curl_setopt($ch, CURLOPT_TIMEOUT, 5); curl_multi_add_handle($mh, $ch); $handles[] = $ch; } // Create a status variable so we know when exec is done. $running = null; //execute the handles do { // Call exec. This call is non-blocking, meaning it works in the background. curl_multi_exec($mh,$running); // Sleep while it's executing. You could do other work here, if you have any. sleep(2); // Keep going until it's done. } while ($running > 0); // For loop to remove (close) the regular handles. foreach($handles as $ch) { // Remove the current array handle. curl_multi_remove_handle($mh, $ch); } // Close the multi handle curl_multi_close($mh);

  Read the article

• PHP curl timing mismatch

  - by JonoB

  I am running a php script that: queries a local database to retrieve an amount executes a curl statement to update an external database with the above amount + x queries the local database again to insert a new row reflecting that the curl statement has been executed. One of the problems that I am having is that the curl statement takes 2-4 seconds to execute, so I have two different users from the same company running the same script at the same time, the execution time of the curl command can cause a mismatch in what should be updated in the external database. This is the because the curl statement has not yet returned from the first user...so the second user is working off incorrect figures. I am not sure of the best options here, but basically I need to prevent two or more curl statements being run at the same time. I thought of storing a value in the database that indicates that the curl statement is being executed at that time, and prevent any other curl statements being run until its completed. Once the first curl statement has been executed, then the database flag is updated and the next one can run. If this field is 'locked', then I could loop through the code and sleep for (5) seconds, and then check again if the flag has been reset. If after (3) loops, then reset the flag automatically (i've never seen the curl take longer than 5 seconds) and continue processing. Are there any other (more elegant) ways of approaching this?

  Read the article

• Lucene setboost doesn't work

  - by Keven

  Hi all, OUr team just upgrade lucene from 2.3 to 3.0 and we are confused about the setboost and getboost of document. What we want is just set a boost for each document when add them into index, then when search it the documents in the response should have different order according to the boost I set. But it seems the order is not changed at all, even the boost of each document in the search response is still 1.0. Could some one give me some hit? Following is our code: String[] a = new String[] { "schindler", "spielberg", "shawshank", "solace", "sorcerer", "stone", "soap", "salesman", "save" }; List strings = Arrays.asList(a); AutoCompleteIndex index = new Index(); IndexWriter writer = new IndexWriter(index.getDirectory(), AnalyzerFactory.createAnalyzer("en_US"), true, MaxFieldLength.LIMITED); float i = 1f; for (String string : strings) { Document doc = new Document(); Field f = new Field(AutoCompleteIndexFactory.QUERYTEXTFIELD, string, Field.Store.YES, Field.Index.NOT_ANALYZED); doc.setBoost(i); doc.add(f); writer.addDocument(doc); i += 2f; } writer.close(); IndexReader reader2 = IndexReader.open(index.getDirectory()); for (int j = 0; j < reader2.maxDoc(); j++) { if (reader2.isDeleted(j)) { continue; } Document doc = reader2.document(j); Field f = doc.getField(AutoCompleteIndexFactory.QUERYTEXTFIELD); System.out.println(f.stringValue() + ":" + f.getBoost() + ", docBoost:" + doc.getBoost()); doc.setBoost(j); }

  Read the article

• Sql Server Compact Edition version error.

  - by Tim

  I am working on .NET ClickOnce project that uses Sql Server 2005 Compact Edition to synchronize remote data through the use of a Merge replication. This application has been live for nearly a year now, and while we encounter occasional synchronization errors, things run quite smoothly for the most part. Yesterday a user reported an error that I have never seen before and have yet to find any information for online. Many users synchronize every night, and I haven't received error reports from anyone else, so this issue must be isolated to this particular user / client machine. Here are the full details of the error: -Error Code : 80004005 -Message : The message contains an unexpected replication operation code. The version of SQL Server Compact Edition Client Agent and SQL Server Compact Edition Server Agent should match. [ replication operation code = 31 ] -Minor Error : 28526 -Source : Microsoft SQL Server Compact Edition -Numeric Parameters : 31 One interesting thing that I've found is that his data does get synchronized to the server, so this error must occur after the upload completes. I have yet to determine whether or not changes at the server are still being downloaded to his subscription. Thinking that maybe there was some kind of version conflict going on, I had a remote desktop session with this user last night and uninstalled both the application and the SQL Server Compact Edition prerequisite, then reinstalled both from our ClickOnce publication site. I also removed his existing local database file so that upon synchronization, an entirely new subscription would be issued to him. Still his errors continue. I suppose the error may be somewhat general, and the text in the error message stating that the versions should match may not necessarily reflect the problem at hand. This site contains the only official reference to this error that I've been able to find, and it offers no more detail than the error message itself. Has anyone else encountered this error? Or at least know more about SQL Compact to have a better guess as to what is going on here? Any help / suggestions will be greatly appreciated!

  Read the article

• While loop problems

  - by Luke

  I have put together the following code, the problem is that each while loop is only returning one set of data. $result = mysql_query("SELECT date FROM ".TBL_FIXTURES." WHERE compname = '$comp_name' GROUP BY date"); $i = 1; echo "<table cellspacing=\"10\" style='border: 1px dotted' width=\"300\" bgcolor=\"#eeeeee\">"; while ($row = mysql_fetch_assoc($result)) { $date=date("F j Y", $row['date']); echo $date; echo " <tr> <td>Fixture $i - Deadline on $date</td> </tr> "; $result = mysql_query("SELECT * FROM ".TBL_FIXTURES." WHERE compname = '$comp_name' AND date = '$row[date]' ORDER BY date"); while ($row = mysql_fetch_assoc($result)) { extract ($row); echo " <tr> <td>$home_user - $home_team V $away_user - $away_team</td> </tr> "; } $i++; } echo "</table>"; I should get many dates, and then each set of fixture below. At the moment, the first row from the first while loop is present, along with the data from the second while loop. However, it doesn't continue? Any ideas where I can correct this? Thanks

  Read the article

• segmentation fault in file operations in c

  - by mekasperasky

  #include<stdio.h> /* this is a lexer which recognizes constants , variables ,symbols, identifiers , functions , comments and also header files . It stores the lexemes in 3 different files . One file contains all the headers and the comments . Another file will contain all the variables , another will contain all the symbols. */ int main() { int i; char a,b[20],c; FILE *fp1; fp1=fopen("source.txt","r"); //the source file is opened in read only mode which will passed through the lexer //now lets remove all the white spaces and store the rest of the words in a file if(fp1==NULL) { perror("failed to open source.txt"); //return EXIT_FAILURE; } i=0; while(1) { a=fgetc(fp1); if(a !="") { b[i]=a; } else { fprintf(fp1, "%.20s\n", b); i=0; continue; } i=i+1; /*Switch(a) { case EOF :return eof; case '+':sym=sym+1; case '-':sym=sym+1; case '*':sym=sym+1; case '/':sym=sym+1; case '%':sym=sym+1; case ' */ } return 0; } how does this code end up in segmentation fault?

  Read the article

• How to use IO.popen to write-to and read-from a child process?

  - by mackenir

  I am running net share from a ruby script to delete a windows network share. If files on the share are in use, net share will ask the user if they want to go ahead with the deletion, so my script needs to inspect the output from the command, and write out Y if it detects that net share is asking it for input. In order to be able to write out to the process I open it with access flags "r+". When attempting to write to the process with IO#puts, I get an error: Errno::EPIPE: Broken pipe What am I doing wrong here? (The error occurs on the line net_share.puts "Y") (The question text written out by net share is not followed by a newline, so I am using IO#readpartial to read in the output.) def delete_network_share share_path command = "net share #{share_path} /DELETE" net_share = IO.popen(command, "r+") text = "" while true begin line = net_share.readpartial 1000 #read all the input that's available rescue EOFError break end text += line if text.scan("Do you want to continue this operation? (Y/N)").size > 0 net_share.puts "Y" net_share.flush #probably not needed? end end net_share.close end

  Read the article

• How to properly set button phase after dragging over button?

  - by irobeth

  I have a class (mxml) that extends Button while implementing drag/drop support. When I drag one of them onto another, the drag receiver stays stuck in its 'over' phase until I click on it (As if something about DragManager.acceptDragDrop is preventing the MouseEvent from getting to button) Is there a way to make a button re-evaluate its phase after the drop? I've tried fabricating a MouseEvent and sending it to rollOverHandler with no luck. This resembles the scenario in Button.as (lines 2606-2647) described like Drag over and up mouse down while out of Button roll over Button - stay in "up" phase mouse up while over Button - "over" phase continue with step 2 of first three sequences above This is my drag/drop handler private function dragDropHandler(event:DragEvent):void { trace("dropped"); var ib : IconButton = (event.dragInitiator as IconButton); if(this.data is Section) { if(ib.data is Item) { trace("ITEM"); //move an item into a section. var ae : AldonaEvent = new AldonaEvent(AldonaEvent.MOVE); ae.data = ib.data; dispatchEvent(ae); } else if(ib.data is Section) { trace("SECTION"); //change a section's parent. var ae : AldonaEvent = new AldonaEvent(AldonaEvent.MOVE); ae.data = ib.data; dispatchEvent(ae); } } //you can only drag stuff into sections. }

  Read the article

• php class scope when calling a non-method function not accessing all class members

  - by Aglystas

  So I'm using a stand alone function from within a class that that uses the class it's being called from. Here's the function function catalogProductLink($product_id,$product_name,$categories=true) { //This is the class that the function is called from global $STATE; if ($categories) { //The $STATE->category_id is the property I want to access, which I can't if (is_array($STATE->category_id)) { foreach($STATE->category_id as $cat_id) { if ($cat_id == 0) continue; $str .= "c$cat_id/"; } } } $str .= catalogUrlKeywords($product_name).'-p'.$product_id.'.html'; return $str; } And here's the function call, which is being made from within the $STATE class. $redirect = catalogProductLink($this->product_id, $tempProd->product_name, true, false); The object that I need access to is the $STATE object that has been declared global. Prior to this function call there are lots of public properties populated, but when I look at the $STATE object within the function scope it loses all the properties but one, product_id. The property that matters for this function is the category_id property, which is an array of category id's. I'm wondering why I don't have access to all the public properties of the $STATE object and how I can get access to them.

  Read the article

• My iPhone app ran fine in simulator but crashed on device (iPod touch 3.1.2) test, I got the followi

  - by Mickey Shine

  I was running myapp on an iPod touch and I noticed it missed some libraries. Is that the reason? [Session started at 2010-03-19 15:57:04 +0800.] GNU gdb 6.3.50-20050815 (Apple version gdb-1128) (Fri Dec 18 10:08:53 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys007 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-237-78 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… [Switching to thread 11779] [Switching to thread 11779] sharedlibrary apply-load-rules all (gdb) continue warning: Unable to read symbols for "/Library/MobileSubstrate/MobileSubstrate.dylib" (file not found). 2010-03-19 15:57:18.892 myapp[2338:207] MS:Notice: Installing: com.yourcompany.myapp [myapp] (478.52) 2010-03-19 15:57:19.145 myapp[2338:207] MS:Notice: Loading: /Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib warning: Unable to read symbols for "/Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib" (file not found). warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/usr/lib/libsubstrate.dylib" (file not found). MS:Warning: message not found [myappAppDelegate applicationWillResignActive:] MS:Warning: message not found [myappAppDelegate applicationDidBecomeActive:] 2010-03-19 15:57:19.550 myapp[2338:207] in FirstViewController 2010-03-19 15:57:20.344 myapp[2338:207] in load table view 2010-03-19 15:57:20.478 myapp[2338:207] in loading splash view 2010-03-19 15:57:22.793 myapp[2338:207] in set interface Program received signal: “0”. warning: check_safe_call: could not restore current frame

  Read the article

• Trouble creating a SQL query

  - by JoBu1324

  I've been thinking about how to compose this SQL query for a while now, but after thinking about it for a few hours I thought I'd ask the SO community to see if they have any ideas. Here is a mock up of the relevant portion of the tables: contracts id date ar (yes/no) term payments contract_id payment_date The object of the query is to determine, per month, how many payments we expect, vs how many payments we received. conditions for expecting a payment Expected payments begin on contracts.term months after contracts.date, if contracts.ar is "yes". Payments continue to be expected until the month after the first missed payment. There is one other complication to this: payments might be late, but they need to show up as if they were paid on the date expected. The data is all there, but I've been having trouble wrapping my head around the SQL query. I am not an SQL guru - I merely have a decent amount of experience handling simpler queries. I'd like to avoid filtering the results in code, if possible - but without your help that may be what I have to do. Expected Output Month Expected Payments Received Payments January 500 450 February 498 478 March 234 211 April 987 789 ... SQL Fiddle I've created an SQL Fiddle: http://sqlfiddle.com/#!2/a2c3f/2

  Read the article

• Unknown and unreproducible crash causes App Store rejection

  - by Daniel Johnson

  After submitting our application several times, we continue to receive the following response: Thank you for submitting My App to the App Store. We've reviewed your application and determined that we cannot post this version of your iPad application to the App Store because My App is crashing on iPad running iPhone OS 3.2 and Mac OS X 10.6.2. My App crashes upon launch. Unfortunately, crash logs have not been generated. However, resigning the same build with the AdHoc entitlements and loading the build onto the device yields no such crash. After a number of attempts, the application simply does not crash as reported by the reviewer. Furthermore, the reviewer does not provide any useful logging that may have been generated by SpringBoard such as an exit status or event if it had worked properly for any other device. There are no calls to explicitly exit or quit the application in the code line and yet the application terminates on startup. What might cause an application to terminate in such a manner? Under what conditions is an application tested that might not be found under a development environment? Could it be a result of a signing issue that the submission validation system is simply unable to catch? Thanks in advance.

  Read the article

• Search a string in a file and write the matched lines to another file in Java

  - by Geeta

  For searching a string in a file and writing the lines with matched string to another file it takes 15 - 20 mins for a single zip file of 70MB(compressed state). Is there any ways to minimise it. my source code: getting Zip file entries zipFile = new ZipFile(source_file_name); entries = zipFile.entries(); while (entries.hasMoreElements()) { ZipEntry entry = (ZipEntry)entries.nextElement(); if (entry.isDirectory()) { continue; } searchString(Thread.currentThread(),entry.getName(), new BufferedInputStream (zipFile.getInputStream(entry)), Out_File, search_string, stats); } zipFile.close(); Searching String public void searchString(Thread CThread, String Source_File, BufferedInputStream in, File outfile, String search, String stats) throws IOException { int count = 0; int countw = 0; int countl = 0; String s; String[] str; BufferedReader br2 = new BufferedReader(new InputStreamReader(in)); System.out.println(CThread.currentThread()); while ((s = br2.readLine()) != null) { str = s.split(search); count = str.length - 1; countw += count; //word count if (s.contains(search)) { countl++; //line count WriteFile(CThread,s, outfile.toString(), search); } } br2.close(); in.close(); } -------------------------------------------------------------------------------- public void WriteFile(Thread CThread,String line, String out, String search) throws IOException { BufferedWriter bufferedWriter = null; System.out.println("writre thread"+CThread.currentThread()); bufferedWriter = new BufferedWriter(new FileWriter(out, true)); bufferedWriter.write(line); bufferedWriter.newLine(); bufferedWriter.flush(); } Please help me. Its really taking 40 mins for 10 files using threads and 15 - 20 mins for a single file of 70MB after being compressed. Any ways to minimise the time.

  Read the article

• What's the next steps for moving from appengine to full django?

  - by tomcritchlow

  Hey guys, I'm super new to programming and I've been using appengine to help me learn python and general coding. I'm getting better quickly and I'm loving it all the way :) Appengine was awesome for allowing me to just dive into writing my app and getting something live that works (see http://www.7bks.com/). But I'm realising that the longer I continue to learn on appengine the more I'm constraining myself and locking myself into a single system. I'd like to move to developing on full django (since django looks super cool!). What are my next steps? To give you a feel for my level of knowledge: I'm not a unix user I'm not familiar with command line controls (I still use appengine/python completely via the appengine SDK) I've never programmed in anything other than python, anywhere other than appengine I know the word SQL, but don't know what MySQL is really or how to use it. So, specifically: What are the skills I need to learn to get up and running with full django/python? If I'm going to host somewhere else I suppose I'll need to learn some sysadmin type skills (maybe even unix?). Is there anywhere that offers easy hosting (like appengine) but that supports django? I hear such great things about heroku I'm considering switching to RoR and going there I appreciate that I'm likely not quite ready to move away from appengine just yet but I'm a fiercely passionate learner (http://www.7bks.com/blog/179001) and would love it if I knew all the steps I needed to learn so I could set about learning them. At the moment, I don't even know what the steps are I need to learn! Thank you very much. Sorry this isn't a specific programming question but I've looked around and haven't found a good how-to for someone of my level of experience and I think others would appreciate a good roadmap for the things we need to learn to get up and running. Thanks, Tom PS - if anyone is in London and fancies showing me the ropes in person that would be super awesome :)

  Read the article

< Previous Page | 165 166 167 168 169 170 171 172 173 174 175 176  | Next Page >