Search Results

Search found 1114 results on 45 pages for 'robert gould'.

Page 17/45 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Computer freezes +/- 30 seconds, suspicion on SSD

    - by Robert vE
    My computer freezes for about 30 seconds, this happens occasionally. When it happens I can still move the mouse, sometimes even alternate between tabs in google chrome. If I try to open windows explorer nothing happens. Also chrome rapports "waiting for cache". It also happens in starcraft II, during which the sounds loops. I have made a Trace as this topic describes: How do I troubleshoot a Windows 7 freeze or slowness? Trace: https://docs.google.com/open?id=0B_VkKdh535p6NklhSDdBLURUMnc I have looked at it, but I couldn't figure it out. My system specs are: AMD Athlon X4 651 Asus Ati HD6670 ADATA SSD sp900 Asus f1a55 mainboard 4 GB crucial 1333 ram 500 watt atx ps I'm running Windows 7, fully updated. Any help is much appreciated. Update: I tried something before your reply that may have helped the problem. I don't know for sure if it has, it's too soon to tell. A bit of history first. I had problems installing win7 on my ssd from the start. In IDE mode it worked, but I had the same problems as above. AHCI was a total fail, with it on before install as well as turning it on after install (including tweaking register). I didn't bother installing the AMD chipset/AHCI as it was reported to have no TRIM function and thus make problems worse. Eventually I did install the AMD SMbus driver as the stability issues were driving me crazy. It worked, no more issues, until I installed some extra drivers and software. Audio/LAN/ASUS suite, I don’t see the relation, but somehow it screwed up my system again. As a last effort I posted here on this site. After which the thought occurred to me turn on AHCI again as by now I had all necessary drivers installed anyway. (plus all windows updates downloaded/installed in the meantime) I did and stability didn’t seem great the first few reboots, but eventually everything seemed to work great. I tried to play starcraft II – an almost guaranteed freeze before – and I had no problems. I’m basically crossing my fingers and hope the problem is gone for good. I still think it has something to do with my SSD. In my research into the problem I noticed a lot of these issues with sandforce 2281 firmware, the exact same firmware I have. People reported the same problem that I had, freezes. Additionally they reported that during a freeze the hdd light stayed on, I noticed after I read this that this happened with my computer as well. None of this is conclusive evidence that my SSD is really to fault, but it is suspicious. And why turning on AHCI would fix it I don’t know. Thank you Tom for taking a look, if the problem returns I will certainly do what you advised.

    Read the article

  • Instructions to setup domain controller

    - by Robert Koritnik
    Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a network adapter to linksys and a virtual adapter to DC DC machine has two network adapters: one to linksys (to be inetrnet connected) and one to host (my dev Win7 machine)

    Read the article

  • windows 2000 freezing during large disk write

    - by robert
    We have a windows 2000 sp4 server which freezes up for about 1 minutes while its web-app does a ~500mb write operation. I can see the webapp start to do I/O activity (through process explorer) then the RDP session becomes unresponsive, you can click on windows and buttons but nothing happens. When the disk write finally finishes the session 'catches up' on all the mouse clicks you did during the freeze in a mad flurry of window activity and the server returns to normal. During the freeze the web-app stops as well. The same behaviour happens on the console of the server. (so I know its not a network thing) Nothing appears in the Event logs. Its like nothing happened. I have upgraded all the HP hardware drivers to the latest proliant support pack. And also run a HP hardware diagnostics which found nothing wrong. What would cause a disk write to lock the rest of the OS?

    Read the article

  • Instructions to setup primary and only domain controller

    - by Robert Koritnik
    Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a hw network adapter to linksys and a virtual network adapter to DC DC machine has two network adapters: one to linksys (to be internet connected so it can be updated etc.) and one to host (my dev Win7 machine) Edit My development machine should access domain controller and logon using domain credentials. Development machine would access internet directly via Linksys router. My domain controller machine would only serve authentication (and if I'm able to configure it right) should also have Active Directory Federation Services in a workable condition. I hope this is a bit more clear now. At least a small bit.

    Read the article

  • Del/Erase Commands

    - by Robert A Palmer
    I'm currently trying to use the del or the erase command in a RSM Telnet to delete Temp files on users computers. But the problem I'm running into with the command is that it is working, but won't delete any of the files located in the temp folder. Command I'm using : erase c:\users\[username]\appdata\local\temp I have used the command with the /p to prompt me, but some of these temp folders have thousands of files in them and sitting there and pressing Y and then enter endlessly is not going to work, because I have around 90 computers to clean temp files on. Is there something wrong with the command or is there a simpler command to use to delete the temp files on the computer? Thanks

    Read the article

  • How do I restore system default settings on Linux Mint KDE?

    - by Robert Kelly
    I did something weird and now my text size is like 3pt on every system window, but when I go in and change my window fonts to larger to something that looks normal, it makes my clock, bash, and other fonts absolutely gigantic. Is there any way I can just roll back my system and it's settings? It wouldn't be much bother as I installed the OS yesterday. I'd hate to have to reinstall entirely though, but I guess it's an option.

    Read the article

  • Single machine domain with Windows 7 OS

    - by Robert Koritnik
    Is it possible to setup one single machine with Windows 7 x64 OS and somehow make it work as if it's part of a certain domain? So domain controller would be simulated in some way? I would like to avoid VMs and make it actually work on one machine with non server OS. Is there even a simpler way of doing it? Why: I have to setup development environment for Sharepoint 2010 and it will make my life much easier if my machine would be part of a domain.

    Read the article

  • Data take on with Drupal 6

    - by Robert MacLean
    We are migrating our current intranet to Drupal 6 and there is a lot of data within the current system which can be classified into: List data, general lists of fields. Common use is phone list of the employees phone numbers. Document repository. Just basically a web version of a file share for documents. I can easily get the data + meta infomation out, but how do I bulk upload the two types of data into Drupal, as uploading the hundred of thousands of items manually is just not acceptable.

    Read the article

  • Login authentication vanished from MongoDB install

    - by Robert Oschler
    A few months ago I enabled password protection on my MongoDB install. Today I ran the Mongo client and forgot to use my login details. Instead of rejecting nearly everything I try to do from the shell, like it should, I had complete access to all the databases and collections. Fortunately this instance is only running a few test apps, so I quickly shutdown the MongoD instance until I figure this out. Has anybody ever seen this kind of behavior before and knows what is going on? The MongoD instance is running on a Linux VM hosted by Azure. The only thing I can think of is that perhaps Azure restored an old copy of the VM, but I received no E-mails to that effect and everything else on the server seems to be proper, including new daemon processes that I added after I enabled password protection on MongoD.

    Read the article

  • How to Mount remote disc as local in Windows 7 and Windows 2003?

    - by Robert
    Is it possible to mount remote file system (on Windows 2003 server) as local disk in Windows 7? I have Windows 2003 server with software RAID and some shares. On another computer with Windows 7 I have software which can access only data form local or USB disks. This solution doesn't work because program doesn't see files in folder: Mount Remote CIFS/SMB Share as a Folder not a Drive Letter Everything is the same LAN.

    Read the article

  • Internet Time tab has disappeared from the Date and Time applet of the Control Panel

    - by Robert Thornton
    Previously, there was an Internet Time tab on the Date and Time applet of the Control Panel, wherein one could force a query of an internet time server and also type in a different server from the ones supplied. However, this tab has now disappeared, and I need to have it back. I should mention that this machine has never been part of a domain, since it seems that machines that are such do not have such a tab. I should be obliged to anyone who can help me restore the missing tab. Windows 7 Home Premium Service Pack 1

    Read the article

  • Why is MySQL making the CPU run at about 80%?

    - by Robert
    MySQL is eating up about 80% of my CPU for no reason as far as I can see. Right now this server is rarely used, more of a test site I set up that will eventually be a used for production once I fix small problems like this. I run 3 instances of MySQL but it seems that my first instance is taking up all the CPU. When I turn off the first instance and leave the other two on everything runs fine. Any suggestions? I tried Show Processlist and no statements are being run besides "Sleep" and the query "Show Processlist" (obviously) at the time it's using up all this CPU. my.cnf is basic. I did not optimize or change any MySQL settings. Do you think this would cause such strange behavior? The machine is running Linux Centos 5.7 64 bit and MySQL 5.0.95. Thanks

    Read the article

  • How can I get Windows 8 to automatically disable touch when I am using my Wacom pen and turn it back on when I am not

    - by Robert
    I have an HP convertible tablet computer which I just upgraded to Windows 8. The problem (which existed under Windows 7 as well) is that this tablet has both a capacitive touch screen (with multi-touch) AND a wacom-type tablet built in to the screen that works using electro-magnetic resonance with the provided stylus. My Use Case: Most of the time I am happy using my fingers and the touch interface for navigation and whatnot. However, when I want to get down to serious note-taking/drawing, I want to use the wacom functionality. The problem is that any comfortable writing position has me resting my arm/hand on the screen, which activates the touch technology (despite supposed palm-detection algorithms) and completely screws up my input paradigm. My Ideal Solution: Ideallly, since wacom technology senses when the pen is "close" to the screen, I would love to have touch be automatically disabled whenever the wacom pen is detected, and turned back on when it is out of range. this would allow me to seamless switch between the two input methods, and since I NEVER want to use both at once would work perfectly for me. An acceptable alternative: As a next best option, It would be great to be able to turn off the touch functionality (leaving the wacom in place) whenever I entered specific apps (e.g. OneNote, Photoshop, Gimp, Pencil, etc.) and then have it turn back on when I left that app.... As a worst case at least lets me use my PC option: If I could create a shortcut (tile or otherwise) that flips the touch on and off without going all the way through the nested computer settings, that would be better than nothing. Thanks in advance for the help with 1 or more of the above.

    Read the article

  • Debugging logrotate postrotate script

    - by robert
    Following is my logrotate conf. /mnt/je/logs/apache/jesites/web/*.log" { missingok rotate 0 size 5M copytruncate notifempty sharedscripts postrotate /home/bitnami/.conf/compress-and-upload.sh /mnt/je/logs/apache/jesites/web/ web endscript } And compress-and-upload.sh script, #!/bin/sh # Perform Rotated Log File Compression tar -czPf $1/log.gz $1/*.1 # Fetch the instance id from the instance EC2_INSTANCE_ID="`wget -q -O - http://169.254.169.254/latest/meta-data/instance-id`" if [ -z $EC2_INSTANCE_ID ]; then echo "Error: Couldn't fetch Instance ID .. Exiting .." exit; else /usr/local/bin/s3cmd put $1/log.gz s3://xxxx/logs/$(date +%Y)/$(date +%m)/$(date +%d)/$2/$EC2_INSTANCE_ID-$(date +%H:%M:%S)-$2.gz fi # Removing Rotated Compressed Log File rm -f $1/log.gz The files are rotated, but shell script is not executed. I don't know how to debug the postscript. Is there any logfile I chek to see if there is any permission issues. If i directly execute the script from commandline file upload works. Thanks.

    Read the article

  • Mac Excel 2011: find Items in one column that are not in another column

    - by robert-jakobson
    Hi this is a repeat of the question: Excel: Find Items in one column that are not in another column I have two columns in excel, and I want to find (preferably highlight) the items that are in column B, but not in column A. What's the quickest way to do this? However, the answer given below to in the above-menitoned thread no longer applies to Mac Excel 2011. E.g. there is no "name-a-range" option available on right click etc.. Therefore I am asking this again. Select the list in column A Right-Click and select Name a Range... Enter "ColumnToSearch" Click cell C1 Enter this formula: =MATCH(B1,ColumnToSearch,0) Drag the formula down for all items in B If the formula fails to find a match, it will be marked #N/A, otherwise it will be a number. If you'd like it to be TRUE for match and FALSE for no match, use this formula instead: =IF(ISNA(MATCH(B1,ColumnToSearch,0)),FALSE,TRUE) How should this answer be restated to apply to Mac Excel 2011?

    Read the article

  • MS Outlook Voting mismatch

    - by Robert Ilbrink
    I did send out an Outlook vote to hundreds of employees, using their email address (which is mostly [email protected], but there are many exceptions). The incoming votes are not matched against the email address, but against the display name. Unfortunately, the display name has no real standard either. So instead of seeing this: [email protected] Voted: Yes [email protected] Voted: No I see this: [email protected] [email protected] Doe, Johnathan Philip Voted: Yes Doe - Peeters, Marian Voted: No In the actual list I see the addresses that I sent the vote to PLUS extra lines with the votes that came back. Is there a quick way to match my "send" list with the "received" list? One thing I thought of was to dump the global address book in a file and in Excel use =vlookup. But that seems a lot of work (and I am not even sure that I have the authorization to dump the address book).

    Read the article

  • Weird problem with Visual C++ 2010 Express

    - by Robert Vella
    This has happened before on my Vista Premium installation, and now it's happening on my Windows 7 Home Premium installation. Basically everytime I install Visual Studio Express 2010, it works fine for a random amount of time but then suddenly starts to hide from my sight -- that's the best way I can explain it. VS does not crash, and from what I can tell it does not freeze either; It continues to work, I can even "minimize" and "maximize" it; I simply cannot see it nor can I interact with it any meaningful way. Also: After the "crash" there are no logs in: Root\Program Files (x86)\Microsoft Visual Studio 10.0\Microsoft Visual C++ 2010 Express - ENU. Nor any other files created at the time of the crash. There are no traces in the event viewer. The program seems to be functioning perfectly in the process manager. If I reinstall Visual C++, it works normally for a seemingly random period of time before going cookoo again. I am stumped. This has never happened to me before, with any other program. And yet I doubt it really is a problem with Visual C++; More like something general that seems to have picked on it for some reason. Still, after a clean install with a new OS, I'm kinda thinking there's something wrong here. Any help would be appreciated, altough I suspect that the answer to this question will make me feel embarassed. P.S. Not sure if it helps, but I think around the same time I started having problems (On both installations) with windows turning off the display when I leave the computer, and then seemingly crashing when it turns it on again -- in fact when I interact with it it seems to be responding to my commands without actually display anything.

    Read the article

  • Stop Outlook from acting on IMAP Alerts

    - by Robert
    I have an IMAP server which sets an "account approaching quota" alert when an account is above 85%. For the majority of our users who are using Thunderbird, this works great as they receive the notice once to twice a day as a gentle reminder. Our few die-hard outlook users on the other hand get an annoying popup as often as their account gets polled. Does anyone know of a way to tell outlook to reuse IMAP connections to avoid this problem (or alternatively to disable Outlook reporting of alerts altogether)?

    Read the article

  • How can I expand my current setup?

    - by Robert
    I currently have an HTTP server running on a single machine (it runs Ubuntu Server Edition, if that helps). In the past that has been sufficient, but as traffic has grown I have begun to need more power and storage space. I have a second machine, and have installed Ubuntu Server Edition on it. How do I get the two to run in unison? How is this usually done in professional setups? Thanks, your answers are appreciated.

    Read the article

  • How do I estimate the number of RSS subscribers?

    - by Robert Kosara
    I'm running a website, and would like to get a better idea how many subscribers I have. I can check the number of subscribers on Google Reader for my two feeds (RSS and Atom). I also have access to my server logs, so I sometimes collect all the IP addresses that access the feeds over a month or so and do a uniq. Is that an accurate way of doing this? Are there other feed aggregators that I need to take into account? Any pitfalls when just going by IP address? I've also thought about embedding an image in the feeds to get a better count. But do all feed readers load images automatically?

    Read the article

  • Network? or router? problem

    - by Robert H Mercer
    I have two computers networked through a Netgear WG914 router which is connected to an Ipstar satellite modem via the RG47 LAN connector. The main computer is running Windows 7 Pro 64bit and the secondary computer is running Windows 7 Home Edition 32bit. On occasion there is a loss of internet connection usually on the main computer, often followed by a loss on the secondary comuter. Not, however, always the case. Windows troubleshooter, naturally, is about as much use as a politician in government.......NONE. There appears to be no problem with the ISP bad as it is and often the connection will be remade without any help from me. The difference in the OS's is not of any relevance since I had this problem before I changed over to Windows 7. Not being a nerd when it comes to networking I wonder if anyone has any constructive suggestions.

    Read the article

  • Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

    - by Robert
    From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

    Read the article

  • How do I properly dual boot Ubuntu and Windows 7 on an UEFI system?

    - by S. Robert James
    I have an HP Z210 with Windows 7, which is UEFI based. I'd like to dual boot it to Ubuntu 11.10 with GRUB2, but am having problems due to the UEFI. The install CD goes to the end, but then the machine always boots right into Windows. These problems are apparently documented (here and here), but there's no consensus as to what the simplest solution is. Any recommendations? I want Ubuntu and Windows to both be bootable. (Perhaps if I knew more about UEFI and its system partition, and how it differs from BIOS and MBR, I'd be in a better position. So background answers explaining how UEFI loads up are very appreciated.)

    Read the article

  • Apache2 Virtual Host broken; displayed default index.html on subdomain, but correct content on www.subdomain

    - by Robert K
    I've got a Linode configured as a Ubuntu 10.04.2 web server with Apache 2.2.14. I have a total of 4 sites, all defined under /etc/apache2/sites-available as virtual hosts. All sites are almost identical clones for configuration. And all sites but my last work successfully. default: (www.)exampleadnetwork.com (www.)example.com reseller.example.com trouble: client1.example.com I keep getting this page when I visit the client1.example.com site: It works! This is the default web page for this server. The web server software is running but no content has been added, yet. In my ports.conf file I have the NameVirtualHost correctly set to my IP address on port 80. If I access the "www.sub.example.com" alias the site works! If I access it without the www I see the "It Works" excerpt posted above. Even apache2ctl -S shows that my vhost file parses correctly and is added to the mix. My vhost configuration file is as follows: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName client1.example.com ServerAlias client1.example.com www.client1.example.com DocumentRoot /srv/www/client1.example.com/public_html/ ErrorLog /srv/www/client1.example.com/logs/error.log CustomLog /srv/www/client1.example.com/logs/access.log combined <directory /srv/www/client1.example.com/public_html/> Options -Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </directory> </VirtualHost> The other sites are variations of: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName example.com ServerAlias example.com www.example.com DocumentRoot /srv/www/example.com/public_html/ ErrorLog /srv/www/example.com/logs/error.log CustomLog /srv/www/example.com/logs/access.log combined </VirtualHost> The only site the differs is the other subdomain: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName reseller.example.com ServerAlias reseller.example.com DocumentRoot /srv/www/reseller.example.com/public_html/ ErrorLog /srv/www/reseller.example.com/logs/error.log CustomLog /srv/www/reseller.example.com/logs/access.log combined </VirtualHost> Filenames are the FQDN without the www. prefix. I've followed this advice, but still cannot access subdomain properly.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >