Search Results

Search found 29860 results on 1195 pages for 'write speed'.

Page 172/1195 | < Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >

• Linux software RAID6: rebuild slow

  - by Ole Tange

  I am trying to find the bottleneck in the rebuilding of a software raid6. ## Pause rebuilding when measuring raw I/O performance # echo 1 > /proc/sys/dev/raid/speed_limit_min # echo 1 > /proc/sys/dev/raid/speed_limit_max ## Drop caches so that does not interfere with measuring # sync ; echo 3 | tee /proc/sys/vm/drop_caches >/dev/null # time parallel -j0 "dd if=/dev/{} bs=256k count=4000 | cat >/dev/null" ::: sdbd sdbc sdbf sdbm sdbl sdbk sdbe sdbj sdbh sdbg 4000+0 records in 4000+0 records out 1048576000 bytes (1.0 GB) copied, 7.30336 s, 144 MB/s [... similar for each disk ...] # time parallel -j0 "dd if=/dev/{} skip=15000000 bs=256k count=4000 | cat >/dev/null" ::: sdbd sdbc sdbf sdbm sdbl sdbk sdbe sdbj sdbh sdbg 4000+0 records in 4000+0 records out 1048576000 bytes (1.0 GB) copied, 12.7991 s, 81.9 MB/s [... similar for each disk ...] So we can read sequentially at 140 MB/s in the outer tracks and 82 MB/s in the inner tracks on all the drives simultaneously. Sequential write performance is similar. This would lead me to expect a rebuild speed of 82 MB/s or more. # echo 800000 > /proc/sys/dev/raid/speed_limit_min # echo 800000 > /proc/sys/dev/raid/speed_limit_max # cat /proc/mdstat md2 : active raid6 sdbd[10](S) sdbc[9] sdbf[0] sdbm[8] sdbl[7] sdbk[6] sdbe[11] sdbj[4] sdbi[3](F) sdbh[2] sdbg[1] 27349121408 blocks super 1.2 level 6, 128k chunk, algorithm 2 [9/8] [UUU_UUUUU] [=========>...........] recovery = 47.3% (1849905884/3907017344) finish=855.9min speed=40054K/sec But we only get 40 MB/s. And often this drops to 30 MB/s. # iostat -dkx 1 sdbc 0.00 8023.00 0.00 329.00 0.00 33408.00 203.09 0.70 2.12 1.06 34.80 sdbd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdbe 13.00 0.00 8334.00 0.00 33388.00 0.00 8.01 0.65 0.08 0.06 47.20 sdbf 0.00 0.00 8348.00 0.00 33388.00 0.00 8.00 0.58 0.07 0.06 48.00 sdbg 16.00 0.00 8331.00 0.00 33388.00 0.00 8.02 0.71 0.09 0.06 48.80 sdbh 961.00 0.00 8314.00 0.00 37100.00 0.00 8.92 0.93 0.11 0.07 54.80 sdbj 70.00 0.00 8276.00 0.00 33384.00 0.00 8.07 0.78 0.10 0.06 48.40 sdbk 124.00 0.00 8221.00 0.00 33380.00 0.00 8.12 0.88 0.11 0.06 47.20 sdbl 83.00 0.00 8262.00 0.00 33380.00 0.00 8.08 0.96 0.12 0.06 47.60 sdbm 0.00 0.00 8344.00 0.00 33376.00 0.00 8.00 0.56 0.07 0.06 47.60 iostat says the disks are not 100% busy (but only 40-50%). This fits with the hypothesis that the max is around 80 MB/s. Since this is software raid the limiting factor could be CPU. top says: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 38520 root 20 0 0 0 0 R 64 0.0 2947:50 md2_raid6 6117 root 20 0 0 0 0 D 53 0.0 473:25.96 md2_resync So md2_raid6 and md2_resync are clearly busy taking up 64% and 53% of a CPU respectively, but not near 100%. The chunk size (128k) of the RAID was chosen after measuring which chunksize gave the least CPU penalty. If this speed is normal: What is the limiting factor? Can I measure that? If this speed is not normal: How can I find the limiting factor? Can I change that?

  Read the article

• Can enabling a RAID controller's writeback cache harm overall performance?

  - by Nathan O'Sullivan

  I have an 8 drive RAID 10 setup connected to an Adaptec 5805Z, running Centos 5.5 and deadline scheduler. A basic dd read test shows 400mb/sec, and a basic dd write test shows about the same. When I run the two simultaneously, I see the read speed drop to ~5mb/sec while the write speed stays at more or less the same 400mb/sec. The output of iostat -x as you would expect, shows that very few read transactions are being executed while the disk is bombarded with writes. If i turn the controller's writeback cache off, I dont see a 50:50 split but I do see a marked improvement, somewhere around 100mb/s reads and 300mb/s writes. I've also found if I lower the nr_requests setting on the drive's queue (somewhere around 8 seems optimal) I can end up with 150mb/sec reads and 150mb/sec writes; ie. a reduction in total throughput but certainly more suitable for my workload. Is this a real phenomenon? Or is my synthetic test too simplistic? The reason this could happen seems clear enough, when the scheduler switches from reads to writes, it can run heaps of write requests because they all just land in the controllers cache but must be carried out at some point. I would guess the actual disk writes are occuring when the scheduler starts trying to perform reads again, resulting in very few read requests being executed. This seems a reasonable explanation, but it also seems like a massive drawback to using writeback cache on an system with non-trivial write loads. I've been searching for discussions around this all afternoon and found nothing. What am I missing?

  Read the article

• Extending ext4 partition on debian7.0 on vsphere

  - by VoidPointer

  I have allocated thin provisioning of 15GB when i found 8GB as insufficient. Now debian guest is not able to recognize the change of size. root@debian7-x64:~# lvdisplay --- Logical volume --- LV Path /dev/debian7-x64/root LV Name root VG Name debian7-x64 LV UUID EU6mg0-XTXC-ci3D-bQJi-7XN6-r8Hp-SYxcj0 LV Write Access read/write LV Creation host, time debian7-x64, 2013-06-25 12:02:49 +0530 LV Status available # open 1 LV Size 7.39 GiB Current LE 1892 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:0 --- Logical volume --- LV Path /dev/debian7-x64/swap_1 LV Name swap_1 VG Name debian7-x64 LV UUID xDNtoz-tJUq-M5D6-GGCN-gzcD-fwUv-fYYDR1 LV Write Access read/write LV Creation host, time debian7-x64, 2013-06-25 12:02:49 +0530 LV Status available # open 2 LV Size 376.00 MiB Current LE 94 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:1 root@debian7-x64:~# pvdisplay --- Physical volume --- PV Name /dev/sda5 VG Name debian7-x64 PV Size 7.76 GiB / not usable 2.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 1986 Free PE 0 Allocated PE 1986 PV UUID SehkzH-Gq8Y-jI2f-27Tb-uv1Z-tR1R-5OnTxR root@debian7-x64:~# sfdisk -s /dev/sda: 15728640 /dev/mapper/debian7--x64-root: 7749632 /dev/mapper/debian7--x64-swap_1: 385024 total: 23863296 blocks Help me to extend this partition. No problem in rebooting. I dont have any live CD. Environment : debian 7, with lvm, on vsphere, ext4 partition. Can provide more details when needed.

  Read the article

• download and process a file by ftp at set intervals, with error handling, rescheduling and status messages

  - by compound eye

  I want to download a data file from a remote ftp server to my machine at regular intervals. Once the file is downloaded I want to call another script which will process the file. My development machine is mac os x, the eventual deployment environment is linux. What's would be the stock standard way to automate this? I know I can use cron to schedule curl to download and to run a script that will process the downloaded file at regular intervals, and I know could write a slightly more complex script or an application that would do this and add error handling, rescheduling and sending status emails. But one of my requirements for this project is to write as little custom code as possible, instead I should try to use standard, tried and true existing tools, and if I do have to write code, to try and write the most straightforward code possible. The reason for this is the code will potentially be installed on a large number of machines, all of which will need to be tweaked, customised and maintained by different people, long after I am gone from the project, so the intention is to use well documented, well supported tools as much as possible. This seems such a common task, there must be tools and scripts all over the internet, written by people who have carefully considered everything that could possibly go wrong when you need to download and process a file from a remote server at regular intervals, with error handling, rescheduling and sending status messages. Is that what Expect is for? What would you recommend? (the system will be downloading weather prediction data every six hours, so that the system can prepare in the event of bad weather warnings)

  Read the article

• Can not mount my USB disk-- Ubuntu nor windows[dmesg including]

  - by EthanZ6174

  first, here is my dmesn|tail result right after i plugged the disk: $ dmesg | tail [ 2578.697224] scsi 6:0:0:0: Direct-Access HP v100w PMAP PQ: 0 ANSI: 0 CCS [ 2578.698322] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2578.916464] sd 6:0:0:0: [sdb] 3921920 512-byte logical blocks: (2.00 GB/1.87 GiB) [ 2578.916950] sd 6:0:0:0: [sdb] Write Protect is off [ 2578.916956] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2578.916961] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2578.922460] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2578.922470] sdb: [ 2578.969570] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2578.969578] sd 6:0:0:0: [sdb] Attached SCSI removable disk there is nothing after 'sdb:' ... at the meantime, the lsusb shows: $ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 03f0:3207 Hewlett-Packard Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 045e:0737 Microsoft Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub so... can anyone help me? what's wrong with my USB disk? THX

  Read the article

• file read performance degrades as number of files increases

  - by bfallik-bamboom

  We're observing poor file read IO results that we'd like to better understand. We can use fio to write 100 files with a sustained aggregate throughput of ~700MB/s. When we switch the test to read instead of write, the aggregate throughput is only ~55MB/s. The drop seems related to the number of files since the throughput for read and write are comparable for a single file then diverge proportionally as we increase the number of files. The test server has 24 CPU cores, 48GB of memory, and is running CentOS 6.0. The disk hardware is a RAID 6 array with 12 disks and a Dell H800 controller. This device is partitioned with ext4 using the default settings. Increasing the readahead (using blockdev) improves the read throughput significantly but it still doesn't match write speed. For instance, increasing the readahead from 128KB to 1M improved the read throughput to ~145MB/s. Is this a known performance issue in our OS/disk/filesystem configuration? If so, how can we tell? If not, what tools or tests can we use to further isolate the issue? Thanks.

  Read the article

• Why am I unable to mount my USB drive (unknown partition table)?

  - by Pat

  I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

  Read the article

• phpMyadmin issue on cpanel

  - by user1149244

  I logged in into our cpanel to view phpMyAdmin but I can't open it. It give me this error message: Warning: session_write_close() [function.session-write-close]: write failed: No space left on device (28) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: session_write_close() [function.session-write-close]: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/userhomes/cpanelphpmyadmin/sessions) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 42 Warning: Cannot modify header information - headers already sent by (output started at /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php:42) in /usr/local/cpanel/base/3rdparty/phpMyAdmin/index.php on line 99 I contacted the support to assist me with. They just told me that the server is unmanaged. They told me to delete the free the partition but I don't know how to do it. I'm noob on that matter. The /var/log/btmp is over 8GB as they said. I want to delete that file. How would I do this? I need to free the space of the partition. I need some steps on how to do it and also steps on how to delete the /var/log/btmp. I have been googling around but I haven't found anything.

  Read the article

• Configuration Error ASP.NET password format specified is invalid

  - by salvationishere

  I am getting the above error in IIS 6.0 now when I browse my C# / SQL web application. This was built in VS 2008 and SS 2008 on a 32-bit XP OS. The application was working before I added Login controls to it. However, this is my first time configuring Login/password controls so I am probably missing something really basic. This error doesn't happen until I try to login. Here are the details of my error from IIS; I get the same error in VS: Parser Error Message: Password format specified is invalid. Source Error: Line 31: <add Line 32: name="SqlProvider" Line 33: type="System.Web.Security.SqlMembershipProvider" Line 34: connectionStringName="AdventureWorksConnectionString2" Line 35: applicationName="AddFileToSQL2" Source File: C:\Inetpub\AddFileToSQL2\web.config Line: 33 And the relevant contents of my web.config are: <connectionStrings> <add name="Master" connectionString="server=MSSQLSERVER;database=Master; Integrated Security=SSPI" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Integrated Security=True" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString2" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Integrated Security=True; " providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <membership defaultProvider="SqlProvider" userIsOnlineTimeWindow="15"> <providers> <clear /> <add name="SqlProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="AdventureWorksConnectionString2" applicationName="AddFileToSQL2" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="encrypted" /> </providers> </membership> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <roleManager enabled="true" /> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <authentication mode="Forms"> <forms loginUrl="Password.aspx" protection="All" timeout="30" name="SqlAuthCookie" path="/FormsAuth" requireSSL="false" slidingExpiration="true" defaultUrl="default.aspx" cookieless="UseCookies" enableCrossAppRedirects="false" /> </authentication> <!--Authorization permits only authenticated users to access the application --> <authorization> <deny users="?" /> <allow users="*" /> </authorization> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <!-- The system.webServer section is required for running ASP.NET AJAX under Internet Information Services 7.0. It is not necessary for previous version of IIS. --> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> <system.net> <mailSettings> <smtp from="[email protected]"> <network host="SIDEKICK" password="" userName="" /> </smtp> </mailSettings> </system.net> </configuration> I checked and I do have an aspnetdb database in my SSMS. The Network Service account has SELECT, EXECUTE, INSERT, UPDATE access to this database. But one problem I see is that all of the tables in this database are empty except for aspnet_SchemaVersions, which just has 2 records (common and membership). Is this right? I added users and roles via ASP.NET Configuration wizard, and I believe I set this up correctly since I followed the Microsoft tutorial at http://msdn.microsoft.com/en-us/library/ms998347.aspx. One other problem I see from VS is after adding content to my Page_Load on my initial login Password.aspx.cs file, I'm getting an invalid cast problem below. I googled this problem also but the solutions I saw confused me even more. The Page_Load section I added is: protected void Page_Load(object sender, EventArgs e) { Response.Write("Hello, " + Server.HtmlEncode(User.Identity.Name)); FormsIdentity id = (FormsIdentity)User.Identity; FormsAuthenticationTicket ticket = id.Ticket; Response.Write("<p/>TicketName: " + ticket.Name); Response.Write("<br/>Cookie Path: " + ticket.CookiePath); Response.Write("<br/>Ticket Expiration: " + ticket.Expiration.ToString()); Response.Write("<br/>Expired: " + ticket.Expired.ToString()); Response.Write("<br/>Persistent: " + ticket.IsPersistent.ToString()); Response.Write("<br/>IssueDate: " + ticket.IssueDate.ToString()); Response.Write("<br/>UserData: " + ticket.UserData); Response.Write("<br/>Version: " + ticket.Version.ToString()); } And the VS exception I'm getting: System.InvalidCastException was unhandled by user code Message="Unable to cast object of type 'System.Security.Principal.GenericIdentity' to type 'System.Web.Security.FormsIdentity'." Source="AddFileToSQL" StackTrace: at AddFileToSQL.Password.Page_Load(Object sender, EventArgs e) in C:\Documents and Settings\Admin\My Documents\Visual Studio 2008\Projects\AddFileToSQL2\AddFileToSQL\Password.aspx.cs:line 22 at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) InnerException:

  Read the article

• The Art of Productivity

  - by dwahlin

  Getting things done has always been a challenge regardless of gender, age, race, skill, or job position. No matter how hard some people try, they end up procrastinating tasks until the last minute. Some people simply focus better when they know they’re out of time and can’t procrastinate any longer. How many times have you put off working on a term paper in school until the very last minute? With only a few hours left your mental energy and focus seem to kick in to high gear especially as you realize that you either get the paper done now or risk failing. It’s amazing how a little pressure can turn into a motivator and allow our minds to focus on a given task. Some people seem to specialize in procrastinating just about everything they do while others tend to be the “doers” who get a lot done and ultimately rise up the ladder at work. What’s the difference between these types of people? Is it pure laziness or are other factors at play? I think that some people are certainly more motivated than others, but I also think a lot of it is based on the process that “doers” tend to follow - whether knowingly or unknowingly. While I’ve certainly fought battles with procrastination, I’ve always had a knack for being able to get a lot done in a relatively short amount of time. I think a lot of my “get it done” attitude goes back to the the strong work ethic my parents instilled in me at a young age. I remember my dad saying, “You need to learn to work hard!” when I was around 5 years old. I remember that moment specifically because I was on a tractor with him the first time I heard it while he was trying to move some large rocks into a pile. The tractor was big but so were the rocks and my dad had to balance the tractor perfectly so that it didn’t tip forward too far. It was challenging work and somewhat tedious but my dad finished the task and taught me a few important lessons along the way including persistence, the importance of having a skill, and getting the job done right without skimping along the way. In this post I’m going to list a few of the techniques and processes I follow that I hope may be beneficial to others. I blogged about the general concept back in 2009 but thought I’d share some updated information and lessons learned since then. Most of the ideas that follow came from learning and refining my daily work process over the years. However, since most of the ideas are common sense (at least in my opinion), I suspect they can be found in other productivity processes that are out there. Let’s start off with one of the most important yet simple tips: Start Each Day with a List. Start Each Day with a List What are you planning to get done today? Do you keep track of everything in your head or rely on your calendar? While most of us think that we’re pretty good at managing “to do” lists strictly in our head you might be surprised at how affective writing out lists can be. By writing out tasks you’re forced to focus on the most important tasks to accomplish that day, commit yourself to those tasks, and have an easy way to track what was supposed to get done and what actually got done. Start every morning by making a list of specific tasks that you want to accomplish throughout the day. I’ll even go so far as to fill in times when I’d like to work on tasks if I have a lot of meetings or other events tying up my calendar on a given day. I’m not a big fan of using paper since I type a lot faster than I write (plus I write like a 3rd grader according to my wife), so I use the Sticky Notes feature available in Windows. Here’s an example of yesterday’s sticky note: What do you add to your list? That’s the subject of the next tip. Focus on Small Tasks It’s no secret that focusing on small, manageable tasks is more effective than trying to focus on large and more vague tasks. When you make your list each morning only add tasks that you can accomplish within a given time period. For example, if I only have 30 minutes blocked out to work on an article I don’t list “Write Article”. If I do that I’ll end up wasting 30 minutes stressing about how I’m going to get the article done in 30 minutes and ultimately get nothing done. Instead, I’ll list something like “Write Introductory Paragraphs for Article”. The next day I may add, “Write first section of article” or something that’s small and manageable – something I’m confident that I can get done. You’ll find that once you’ve knocked out several smaller tasks it’s easy to continue completing others since you want to keep the momentum going. In addition to keeping my tasks focused and small, I also make a conscious effort to limit my list to 4 or 5 tasks initially. I’ve found that if I list more than 5 tasks I feel a bit overwhelmed which hurts my productivity. It’s easy to add additional tasks as you complete others and you get the added benefit of that confidence boost of knowing that you’re being productive and getting things done as you remove tasks and add others. Getting Started is the Hardest (Yet Easiest) Part I’ve always found that getting started is the hardest part and one of the biggest contributors to procrastination. Getting started working on tasks is a lot like getting a large rock pushed to the bottom of a hill. It’s difficult to get the rock rolling at first, but once you manage to get it rocking some it’s really easy to get it rolling on its way to the bottom. As an example, I’ve written 100s of articles for technical magazines over the years and have really struggled with the initial introductory paragraphs. Keep in mind that these are the paragraphs that don’t really add that much value (in my opinion anyway). They introduce the reader to the subject matter and nothing more. What a waste of time for me to sit there stressing about how to start the article. On more than one occasion I’ve spent more than an hour trying to come up with 2-3 paragraphs of text.  Talk about a productivity killer! Whether you’re struggling with a writing task, some code for a project, an email, or other tasks, jumping in without thinking too much is the best way to get started I’ve found. I’m not saying that you shouldn’t have an overall plan when jumping into a task, but on some occasions you’ll find that if you simply jump into the task and stop worrying about doing everything perfectly that things will flow more smoothly. For my introductory paragraph problem I give myself 5 minutes to write out some general concepts about what I know the article will cover and then spend another 10-15 minutes going back and refining that information. That way I actually have some ideas to work with rather than a blank sheet of paper. If I still find myself struggling I’ll write the rest of the article first and then circle back to the introductory paragraphs once I’m done. To sum this tip up: Jump into a task without thinking too hard about it. It’s better to to get the rock at the top of the hill rocking some than doing nothing at all. You can always go back and refine your work.   Learn a Productivity Technique and Stick to It There are a lot of different productivity programs and seminars out there being sold by companies. I’ve always laughed at how much money people spend on some of these motivational programs/seminars because I think that being productive isn’t that hard if you create a re-useable set of steps and processes to follow. That’s not to say that some of these programs/seminars aren’t worth the money of course because I know they’ve definitely benefited some people that have a hard time getting things done and staying focused. One of the best productivity techniques I’ve ever learned is called the “Pomodoro Technique” and it’s completely free. This technique is an extremely simple way to manage your time without having to remember a bunch of steps, color coding mechanisms, or other processes. The technique was originally developed by Francesco Cirillo in the 80s and can be implemented with a simple timer. In a nutshell here’s how the technique works: Pick a task to work on Set the timer to 25 minutes and work on the task Once the timer rings record your time Take a 5 minute break Repeat the process Here’s why the technique works well for me: It forces me to focus on a single task for 25 minutes. In the past I had no time goal in mind and just worked aimlessly on a task until I got interrupted or bored. 25 minutes is a small enough chunk of time for me to stay focused. Any distractions that may come up have to wait until after the timer goes off. If the distraction is really important then I stop the timer and record my time up to that point. When the timer is running I act as if I only have 25 minutes total for the task (like you’re down to the last 25 minutes before turning in your term paper….frantically working to get it done) which helps me stay focused and turns into a “beat the clock” type of game. It’s actually kind of fun if you treat it that way and really helps me focus on a the task at hand. I automatically know how much time I’m spending on a given task (more on this later) by using this technique. I know that I have 5 minutes after each pomodoro (the 25 minute sprint) to waste on anything I’d like including visiting a website, stepping away from the computer, etc. which also helps me stay focused when the 25 minute timer is counting down. I use this technique so much that I decided to build a program for Windows 8 called Pomodoro Focus (I plan to blog about how it was built in a later post). It’s a Windows Store application that allows people to track tasks, productive time spent on tasks, interruption time experienced while working on a given task, and the number of pomodoros completed. If a time estimate is given when the task is initially created, Pomodoro Focus will also show the task completion percentage. I like it because it allows me to track my tasks, time spent on tasks (very useful in the consulting world), and even how much time I wasted on tasks (pressing the pause button while working on a task starts the interruption timer). I recently added a new feature that charts productive and interruption time for tasks since I wanted to see how productive I was from week to week and month to month. A few screenshots from the Pomodoro Focus app are shown next, I had a lot of fun building it and use it myself to as I work on tasks.   There are certainly many other productivity techniques and processes out there (and a slew of books describing them), but the Pomodoro Technique has been the simplest and most effective technique I’ve ever come across for staying focused and getting things done.   Persistence is Key Getting things done is great but one of the biggest lessons I’ve learned in life is that persistence is key especially when you’re trying to get something done that at times seems insurmountable. Small tasks ultimately lead to larger tasks getting accomplished, however, it’s not all roses along the way as some of the smaller tasks may come with their own share of bumps and bruises that lead to discouragement about the end goal and whether or not it is worth achieving at all. I’ve been on several long-term projects over my career as a software developer (I have one personal project going right now that fits well here) and found that repeating, “Persistence is the key!” over and over to myself really helps. Not every project turns out to be successful, but if you don’t show persistence through the hard times you’ll never know if you succeeded or not. Likewise, if you don’t persistently stick to the process of creating a daily list, follow a productivity process, etc. then the odds of consistently staying productive aren’t good.   Track Your Time How much time do you actually spend working on various tasks? If you don’t currently track time spent answering emails, on phone calls, and working on various tasks then you might be surprised to find out that a task that you thought was going to take you 30 minutes ultimately ended up taking 2 hours. If you don’t track the time you spend working on tasks how can you expect to learn from your mistakes, optimize your time better, and become more productive? That’s another reason why I like the Pomodoro Technique – it makes it easy to stay focused on tasks while also tracking how much time I’m working on a given task.   Eliminate Distractions I blogged about this final tip several years ago but wanted to bring it up again. If you want to be productive (and ultimately successful at whatever you’re doing) then you can’t waste a lot of time playing games or on Twitter, Facebook, or other time sucking websites. If you see an article you’re interested in that has no relation at all to the tasks you’re trying to accomplish then bookmark it and read it when you have some spare time (such as during a pomodoro break). Fighting the temptation to check your friends’ status updates on Facebook? Resist the urge and realize how much those types of activities are hurting your productivity and taking away from your focus. I’ll admit that eliminating distractions is still tough for me personally and something I have to constantly battle. But, I’ve made a conscious decision to cut back on my visits and updates to Facebook, Twitter, Google+ and other sites. Sure, my Klout score has suffered as a result lately, but does anyone actually care about those types of scores aside from your online “friends” (few of whom you’ve actually met in person)? :-) Ultimately it comes down to self-discipline and how badly you want to be productive and successful in your career, life goals, hobbies, or whatever you’re working on. Rather than having your homepage take you to a time wasting news site, game site, social site, picture site, or others, how about adding something like the following as your homepage? Every time your browser opens you’ll see a personal message which helps keep you on the right track. You can download my ubber-sophisticated homepage here if interested. Summary Is there a single set of steps that if followed can ultimately lead to productivity? I don’t think so since one size has never fit all. Every person is different, works in their own unique way, and has their own set of motivators, distractions, and more. While I certainly don’t consider myself to be an expert on the subject of productivity, I do think that if you learn what steps work best for you and gradually refine them over time that you can come up with a personal productivity process that can serve you well. Productivity is definitely an “art” that anyone can learn with a little practice and persistence. You’ve seen some of the steps that I personally like to follow and I hope you find some of them useful in boosting your productivity. If you have others you use please leave a comment. I’m always looking for ways to improve.

  Read the article

• Azure &ndash; Part 6 &ndash; Blob Storage Service

  - by Shaun

  When migrate your application onto the Azure one of the biggest concern would be the external files. In the original way we understood and ensure which machine and folder our application (website or web service) is located in. So that we can use the MapPath or some other methods to read and write the external files for example the images, text files or the xml files, etc. But things have been changed when we deploy them on Azure. Azure is not a server, or a single machine, it’s a set of virtual server machine running under the Azure OS. And even worse, your application might be moved between thses machines. So it’s impossible to read or write the external files on Azure. In order to resolve this issue the Windows Azure provides another storage serviec – Blob, for us. Different to the table service, the blob serivce is to be used to store text and binary data rather than the structured data. It provides two types of blobs: Block Blobs and Page Blobs. Block Blobs are optimized for streaming. They are comprised of blocks, each of which is identified by a block ID and each block can be a maximum of 4 MB in size. Page Blobs are are optimized for random read/write operations and provide the ability to write to a range of bytes in a blob. They are a collection of pages. The maximum size for a page blob is 1 TB.   In the managed library the Azure SDK allows us to communicate with the blobs through these classes CloudBlobClient, CloudBlobContainer, CloudBlockBlob and the CloudPageBlob. Similar with the table service managed library, the CloudBlobClient allows us to reach the blob service by passing our storage account information and also responsible for creating the blob container is not exist. Then from the CloudBlobContainer we can save or load the block blobs and page blobs into the CloudBlockBlob and the CloudPageBlob classes.   Let’s improve our exmaple in the previous posts – add a service method allows the user to upload the logo image. In the server side I created a method name UploadLogo with 2 parameters: email and image. Then I created the storage account from the config file. I also add the validation to ensure that the email passed in is valid. 1: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 2: var accountContext = new DynamicDataContext<Account>(storageAccount); 3:  4: // validation 5: var accountNumber = accountContext.Load() 6: .Where(a => a.Email == email) 7: .ToList() 8: .Count; 9: if (accountNumber <= 0) 10: { 11: throw new ApplicationException(string.Format("Cannot find the account with the email {0}.", email)); 12: } Then there are three steps for saving the image into the blob service. First alike the table service I created the container with a unique name and create it if it’s not exist. 1: // create the blob container for account logos if not exist 2: CloudBlobClient blobStorage = storageAccount.CreateCloudBlobClient(); 3: CloudBlobContainer container = blobStorage.GetContainerReference("account-logo"); 4: container.CreateIfNotExist(); Then, since in this example I will just send the blob access URL back to the client so I need to open the read permission on that container. 1: // configure blob container for public access 2: BlobContainerPermissions permissions = container.GetPermissions(); 3: permissions.PublicAccess = BlobContainerPublicAccessType.Container; 4: container.SetPermissions(permissions); And at the end I combine the blob resource name from the input file name and Guid, and then save it to the block blob by using the UploadByteArray method. Finally I returned the URL of this blob back to the client side. 1: // save the blob into the blob service 2: string uniqueBlobName = string.Format("{0}_{1}.jpg", email, Guid.NewGuid().ToString()); 3: CloudBlockBlob blob = container.GetBlockBlobReference(uniqueBlobName); 4: blob.UploadByteArray(image); 5:  6: return blob.Uri.ToString(); Let’s update a bit on the client side application and see the result. Here I just use my simple console application to let the user input the email and the file name of the image. If it’s OK it will show the URL of the blob on the server side so that we can see it through the web browser. Then we can see the logo I’ve just uploaded through the URL here. You may notice that the blob URL was based on the container name and the blob unique name. In the document of the Azure SDK there’s a page for the rule of naming them, but I think the simple rule would be – they must be valid as an URL address. So that you cannot name the container with dot or slash as it will break the ADO.Data Service routing rule. For exmaple if you named the blob container as Account.Logo then it will throw an exception says 400 Bad Request.   Summary In this short entity I covered the simple usage of the blob service to save the images onto Azure. Since the Azure platform does not support the file system we have to migrate our code for reading/writing files to the blob service before deploy it to Azure. In order to reducing this effort Microsoft provided a new approch named Drive, which allows us read and write the NTFS files just likes what we did before. It’s built up on the blob serivce but more properly for files accessing. I will discuss more about it in the next post.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• CodePlex Daily Summary for Wednesday, December 15, 2010

  CodePlex Daily Summary for Wednesday, December 15, 2010Popular ReleasesTweetSharp: TweetSharp v2.0.0.0 - Preview 5: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 5 ChangesMaintenance release with user reported fixes Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous ...SQL Monitor: SQL Monitor 2.8: 1. redesigned the object explorer, support multiple serversEnhSim: EnhSim 2.2.2 ALPHA: 2.2.2 ALPHAThis release adds in the changes for 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - The spirit ...FlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010SuperSocket, an extensible socket application framework: SuperSocket 1.3 beta 1: SuperSocket 1.3 is built on .NET 4.0 framework. Bug fixes: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration value Third-part library upgrades: upgraded SuperSocket to .NET 4.0 upgraded EntLib 4.1 to 5.0 New features: supported UDP socket support custom protocol (can support binary protocol and other complecate...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...WPF Multiple Document Interface (MDI): Beta Release v1.1: WPF.MDI is a library to imitate the traditional Windows Forms Multiple Document Interface (MDI) features in WPF. This is Beta release, means there's still work to do. Please provide feedback, so next release will be better. Features: Position dependency property MdiLayout dependency property Menu dependency property Ctrl + F4, Ctrl + Tab shortcuts should work Behavior: don’t allow negative values for MdiChild position minimized windows: remember position, tile multiple windows, ...SQL Server PowerShell Extensions: 2.3.1 Production: Release 2.3.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 12 modules with 155 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.SwapWin: SwapWin 0.2: Updates: Bring all windows that are swapped to foreground. Make the window sent to primary screen active.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????DNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...AutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...New Projectscomplile: compiler is bestComputer Graphics: Esercitazioni di Computer GraficaDocsVision WorkFlow Extended Library: ?????? ??????, ???????????? ????? ??????????, ??????????? ????? ?????? ? DocsVision.WorkFlow.Gates. ?????????? ?????????? ????????????? ???????-????????? ? ????? DocsVision. ??????????? ??????: - DVTypeConverter; - DVCardProperty.DotNetNuke Razor Forum Profile: A razor based module for DotNetNuke that displays a user's forum profile information (based on the core forum). Excel AddIn to reset the last worksheet cell: This is a sample Excel AddIn to reset the last worsheet cell in an Excel Workbook.FriendFeed Backup Creator: FriendFeed Backup Creator makes it easier for friendfeed users to backup their feeds including likes and comments. You'll no longer have to worry about your old feeds.Gerins: Sistema Gerencial InsolGoodreads for Windows Phone 7: Goodreads client for Windows Phone 7HyperView for DotNetNuke: HyperView for DotNetNuke is a port of the MIT Exhibit project for DotNetNuke. Exhibit enables web site authors to easily create dynamic exhibits of collections. The collections can be searched and browsed using faceted browsing.Ladder Ranking System: A ladder ranking system as a DotNetNuke moduleLive Office Tools: <LOT - Live Office Tools> makes it easier for <target user group> to <Escritórios>. You'll no longer have to <activity>. It's developed in <C#>. LostMamory: ???????GIS??My WP7 Brand: My WP7 Brand is a simple Windows Phone 7 Template that allows users to view your rss feed, your tweet and your contact's info.Network Adapter/ Interface Analyzer, viewer, Speed Calculator: Simple .Net Application to give information about all network adapters in the system, their running status, max speed, download upload speed, etcOnlineenquete: Online enquete is an application based based on BeeldbankMVC. This project will be used as a starting point for creating my online survay toolOpalis Extension Exchange Mail: A Opalis Integration Pack allowing for Exachange 2007 and 2010 mail manipulation functions. Uses Exchange Webservices.PAK: A Sample project for windows Phone 7, Azure and K2 blackpearl.Persephone CMS: // TODO: Some description to be displayed here!!!Perspectives: Perspectives makes it easier for Visual Studio 2010 users to manage window configurations. It's developed in C#. It was modeled after the Eclipse Perspectives window management system.Photo Studio: Photo studio for storing family albumsPorto Alegre Dojo: Porto Alegre DojoRazor's Edge DotNetNuke User Map: Razor's Edge User Map allows you to load your DotnetNuke user's locations on to a map dynamically based on the address in their user profile. It uses the razor scripting language to retrieve user data and display that data on the page.RestUpMVC: RestUpMVC is a library that allows developers to easily expose a RESTful interface from an ASP.NET MVC application. The library was written in C#.Rocket Framework for Windows Form: Rocket Framework winform .net 4.0 WPF generic entity framework repositoryRPG Maplestory XNA SDK C#: a RPG Maplestory XNA SDK makes it easier for all people want to devolopded a Platform rpg in XNA - C# Sistema para Manejo de Maquinas: Sistema para controlar, insertar y almacenar datos.SoloForum: SoloForumUpdate SharePoint 2010 User Personal Settings: Every SharePoint user will have his/her personal settings for a site collection. Each user can view their details by clicking on Logged-in User link and select My Settings menu item. This tool helps to update user personal settings for a particular site collection.uREST 4 Umbraco: uREST is an Umbraco package for adding a set of RESTful web services to an Umbraco website.Veller: This is a high speed game where speed is your ally. The faster you go the more damage you do. You are vulnerable when moving slow, but gain momentum. Windows Forms Wizard: Oddly, the Windows Forms libraries don't provide any support for writing wizards. Here's one way to do it. Yes!gama NewCMS: Yes!gama NewCMS is a simple news CMS Builded by asp.net + access very very simple... maybe u like simlpe tings...

  Read the article

• Supporting users if they're not on your site

  - by Roger Hart

  Have a look at this Read Write Web article, specifically the paragraph in bold and the comments. Have a wry chuckle, or maybe weep for the future of humanity - your call. Then pause, and worry about information architecture. The short story: Read Write Web bumps up the Google rankings for "Facebook login" at the same time as Facebook makes UI changes, and a few hundred users get confused and leave comments on Read Write Web complaining about not being able to log in to their Facebook accounts.* Blindly clicking the first Google result is not a navigation behaviour I'd anticipated for folks visiting big names sites like Facebook. But then, I use Launchy and don't know where any of my files are, depend on Firefox auto-complete, view Facebook through my IM client, and don't need a map to find my backside with both hands. Not all our users behave in the same way, which means not all of our architecture is within our control, and people can get to your content in all sorts of ways. Even if the Read Write Web episode is a prank of some kind (there are, after all, plenty of folks who enjoy orchestrated trolling) it's still a useful reminder. Your users may take paths through and to your content you cannot control, and they are unlikely to deconstruct their assumptions along the way. I guess the meaningful question is: can you still support those users? If they get to you from Google instead of your front door, does what they find still make sense? Does your information architecture still work if your guests come in through the bathroom window? Ok, so here they broke into the house next door - you can't be expected to deal with that. But the rest is well worth thinking about. Other off-site interaction It's rarely going to be as funny as the comments at Read Write Web, but your users are going to do, say, and read things they think of as being about you and your products, in places you don't control. That's good. If you pay attention to it, you get data. Your users get a better experience. There are easy wins, too. Blogs, forums, social media &c. People may look for and find help with your product on blogs and forums, on Twitter, and what have you. They may learn about your brand in the same way. That's fine, it's an interaction you can be part of. It's time-consuming, certainly, but you have the option. You won't get a blogger to incorporate your site navigation just in case your users end up there, but you can be there when they do. Again, Anne Gentle, Gordon McLean and others have covered this in more depth than I could. Direct contact Sales people, customer care, support, they all talk to people. Are they sending links to your content? if so, which bits? Do they know about all of it? Do they have the content they need to support them - messaging that funnels sales, FAQ that are realistically frequent, detailed examples of things people want to do, that kind of thing. Are they sending links because users can't find the good stuff? Are they sending précis of your content, or re-writes, or brand new stuff? If so, does that mean your content isn't up to scratch, or that you've got content missing? Direct sales/care/support interactions are enormously valuable, and can help you know what content your users find useful. You can't have a table of contents or a "See also" in a phonecall, but your content strategy can support more interactions than browsing. *Passing observation about Facebook. For plenty if folks, it is  the internet. Its services are simple versions of what a lot of people use the internet for, and they're aggregated into one stop. Flickr, Vimeo, Wordpress, Twitter, LinkedIn, and all sorts of games, have Facebook doppelgangers that are not only friendlier to entry-level users, they're right there, behind only one layer of authentication. As such, it could own a lot of interaction convention. Heavy users may well not be tech-savvy, and be quite change averse. That doesn't make this episode not dumb, but I'm happy to go easy on 'em.

  Read the article

• MacBook Pro Late 2009 SATA Resets, Slowness (Is my motherboard dying on both machines?)

  - by A Student at a University

  My MacBook Pro runs slower the longer it's on. I am getting kernel warnings. Some, but not all, resets correlate with AC power connects and disconnects. I don't think the warnings do. (How do I tell?) What are these errors? What causes them? Can this damage the drive or corrupt data? What is it seeing that motivates these? 02:37:16[ 0.791992] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 02:37:16[ 0.792047] ahci 0000:00:0b.0: irq 43 for MSI/MSI-X 02:37:16[ 0.792053] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP 02:37:16[ 0.792104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 1.5 Gbps 0x3 impl IDE mode 02:37:16[ 0.792107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh 02:37:16[ 0.792111] ahci 0000:00:0b.0: setting latency timer to 64 02:37:16[ 0.813473] scsi0 : ahci 02:37:16[ 0.823340] scsi1 : ahci 02:37:16[ 0.848164] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 43 02:37:16[ 0.848166] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 43 02:37:16[ 1.190132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.190153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.213568] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133 02:37:16[ 1.213572] ata1.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32) 02:37:16[ 1.227293] ata2.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133 02:37:16[ 1.227297] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) 02:37:16[ 1.229570] ata2.00: configured for UDMA/133 02:37:16[ 1.240120] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.240123] ata2: irq_stat 0x00000040, connection status changed 02:37:16[ 1.240127] ata2: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.240133] ata2: hard resetting link 02:37:16[ 1.260738] ata1.00: configured for UDMA/133 02:37:16[ 1.280111] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.280114] ata1: irq_stat 0x00000040, connection status changed 02:37:16[ 1.280118] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.280122] ata1: hard resetting link 02:37:16[ 1.990101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.994215] ata2.00: configured for UDMA/133 02:37:16[ 1.994220] ata2: EH complete 02:37:16[ 2.030097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 2.090773] ata1.00: configured for UDMA/133 02:37:16[ 2.090778] ata1: EH complete 02:37:16[ 2.090931] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5 02:37:16[ 2.091045] sd 0:0:0:0: Attached scsi generic sg0 type 0 02:37:16[ 2.091121] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) 02:37:16[ 2.091159] scsi 1:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5 02:37:16[ 2.091163] sd 0:0:0:0: [sda] Write Protect is off 02:37:16[ 2.091165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 02:37:16[ 2.091183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.091252] sd 1:0:0:0: Attached scsi generic sg1 type 0 02:37:16[ 2.091446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) 02:37:16[ 2.091580] sd 1:0:0:0: [sdb] Write Protect is off 02:37:16[ 2.091582] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 02:37:16[ 2.091637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.093140] sd 0:0:0:0: [sda] Attached SCSI disk 02:37:16[ 2.093773] sd 1:0:0:0: [sdb] Attached SCSI disk 02:37:16[ 2.693899] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 02:37:16[ 5.483492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro 02:37:16[ 7.905040] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) 02:37:25[ 19.553095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:25[ 19.555266] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:25[ 19.641532] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.641532] ata1: irq_stat 0x00000040, connection status changed 02:37:25[ 19.641532] ata1: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.641533] ata1: hard resetting link 02:37:25[ 19.642076] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.642078] ata2: irq_stat 0x00000040, connection status changed 02:37:25[ 19.642081] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.642084] ata2: hard resetting link 02:37:26[ 20.392606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.392610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.396697] ata2.00: configured for UDMA/133 02:37:26[ 20.396703] ata2: EH complete 02:37:26[ 20.451491] ata1.00: configured for UDMA/133 02:37:26[ 20.451498] ata1: EH complete 02:37:30[ 24.563725] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:30[ 24.565939] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:30[ 24.627236] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:37:30[ 24.627240] ata1: irq_stat 0x00000040, connection status changed 02:37:30[ 24.627242] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.627246] ata1: hard resetting link 02:37:30[ 24.632241] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:30[ 24.632244] ata2: irq_stat 0x00000040, connection status changed 02:37:30[ 24.632247] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.632250] ata2: hard resetting link 02:37:31[ 25.372582] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.382615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.386782] ata2.00: configured for UDMA/133 02:37:31[ 25.386788] ata2: EH complete 02:37:31[ 25.431668] ata1.00: configured for UDMA/133 02:37:31[ 25.431674] ata1: EH complete 02:45:54[ 529.141844] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:55[ 529.544529] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:55[ 529.622561] ata1: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622568] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:55[ 529.622572] ata1: irq_stat 0x00400040, connection status changed 02:45:55[ 529.622576] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622583] ata1: hard resetting link 02:45:55[ 529.622609] ata2: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622613] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:55[ 529.622616] ata2: irq_stat 0x00000040, connection status changed 02:45:55[ 529.622620] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622624] ata2: hard resetting link 02:45:56[ 530.380135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.380157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.384305] ata2.00: configured for UDMA/133 02:45:56[ 530.384314] ata2: EH complete 02:45:56[ 530.399225] ata1.00: configured for UDMA/133 02:45:56[ 530.399233] ata1: EH complete 02:45:58[ 532.395990] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:45:58[ 532.518270] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:45:58[ 532.590968] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5840000 action 0xe frozen t4 02:45:58[ 532.590973] ata1: irq_stat 0x00000040, connection status changed 02:45:58[ 532.590977] ata1: SError: { CommWake LinkSeq TrStaTrns DevExch } 02:45:58[ 532.590983] ata1: hard resetting link 02:45:58[ 532.591034] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:45:58[ 532.591037] ata2: irq_stat 0x00000040, connection status changed 02:45:58[ 532.591041] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:58[ 532.591045] ata2: hard resetting link 02:45:59[ 533.340147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.340168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.344416] ata2.00: configured for UDMA/133 02:45:59[ 533.344424] ata2: EH complete 02:45:59[ 533.360839] ata1.00: configured for UDMA/133 02:45:59[ 533.360847] ata1: EH complete 02:45:59[ 533.584449] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:59[ 533.586999] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:59[ 533.660117] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:59[ 533.660122] ata2: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660126] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660132] ata2: hard resetting link 02:45:59[ 533.660141] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:59[ 533.660143] ata1: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660147] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660151] ata1: hard resetting link 02:46:00[ 534.412536] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.412562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.416768] ata2.00: configured for UDMA/133 02:46:00[ 534.416777] ata2: EH complete 02:46:00[ 534.431396] ata1.00: configured for UDMA/133 02:46:00[ 534.431401] ata1: EH complete 02:46:03[ 537.384649] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:03[ 537.504214] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:03[ 537.585992] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:03[ 537.585996] ata1: irq_stat 0x00000040, connection status changed 02:46:03[ 537.585999] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586002] ata1: hard resetting link 02:46:03[ 537.586028] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:46:03[ 537.586030] ata2: irq_stat 0x00000040, connection status changed 02:46:03[ 537.586033] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586036] ata2: hard resetting link 02:46:04[ 538.330147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.330168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.334389] ata2.00: configured for UDMA/133 02:46:04[ 538.334398] ata2: EH complete 02:46:04[ 538.343511] ata1.00: configured for UDMA/133 02:46:04[ 538.343519] ata1: EH complete 02:46:04[ 538.456413] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:04[ 538.459404] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:04[ 538.540138] ata1.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540144] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:46:04[ 538.540148] ata1: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540153] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540159] ata1: hard resetting link 02:46:04[ 538.540202] ata2.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540207] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:46:04[ 538.540211] ata2: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540215] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540220] ata2: hard resetting link 02:46:05[ 539.290054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.290041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.294100] ata2.00: configured for UDMA/100 02:46:05[ 539.294106] ata2: EH complete 02:46:05[ 539.314125] ata1.00: configured for UDMA/100 02:46:05[ 539.314132] ------------[ cut here ]------------ 02:46:05[ 539.314140] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:05[ 539.314144] Hardware name: MacBookPro5,3 02:46:05[ 539.314146] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:05[ 539.314221] Pid: 202, comm: scsi_eh_0 Tainted: P 2.6.35-25-generic #44-Ubuntu 02:46:05[ 539.314224] Call Trace: 02:46:05[ 539.314233] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:05[ 539.314237] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:05[ 539.314242] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:05[ 539.314246] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:05[ 539.314256] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:05[ 539.314261] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:05[ 539.314266] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:05[ 539.314270] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:05[ 539.314275] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:05[ 539.314280] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:05[ 539.314284] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:05[ 539.314288] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:05[ 539.314291] ---[ end trace 76dbffc2d5d49d9b ]--- 02:46:05[ 539.314296] ata1: EH complete 02:46:12[ 547.040091] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen 02:46:12[ 547.040098] ata1.00: failed command: IDENTIFY DEVICE 02:46:12[ 547.040106] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in 02:46:12[ 547.040108] res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) 02:46:12[ 547.040111] ata1.00: status: { DRDY } 02:46:12[ 547.040117] ata1: hard resetting link 02:46:13[ 547.390144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:13[ 547.408430] ata1.00: configured for UDMA/100 02:46:13[ 547.408438] ------------[ cut here ]------------ 02:46:13[ 547.408447] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:13[ 547.408451] Hardware name: MacBookPro5,3 02:46:13[ 547.408453] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:13[ 547.408528] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 02:46:13[ 547.408531] Call Trace: 02:46:13[ 547.408540] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:13[ 547.408544] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:13[ 547.408549] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:13[ 547.408553] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:13[ 547.408563] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:13[ 547.408567] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:13[ 547.408572] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:13[ 547.408577] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:13[ 547.408582] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:13[ 547.408587] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:13[ 547.408591] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:13[ 547.408595] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:13[ 547.408598] ---[ end trace 76dbffc2d5d49d9c ]--- 02:46:13[ 547.408620] ata1: EH complete 02:46:13[ 547.562470] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:13[ 547.671380] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:13[ 547.738198] ata1.00: limiting speed to UDMA/33:PIO4 02:46:13[ 547.738204] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:13[ 547.738208] ata1: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738212] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738218] ata1: hard resetting link 02:46:13[ 547.738262] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:13[ 547.738265] ata2: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738269] ata2: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738274] ata2: hard resetting link 02:46:14[ 548.482561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.484083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.486809] ata2.00: configured for UDMA/100 02:46:14[ 548.486818] ata2: EH complete 02:46:14[ 548.498998] ata1.00: configured for UDMA/33 02:46:14[ 548.499004] ata1: EH complete 02:46:18[ 552.410499] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:18[ 552.522521] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:18[ 552.529674] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529678] ata1: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529680] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529684] ata1: hard resetting link 02:46:18[ 552.529716] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529718] ata2: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529720] ata2: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529723] ata2: hard resetting link 02:46:19[ 553.280059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.280068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.284141] ata2.00: configured for UDMA/100 02:46:19[ 553.284150] ata2: EH complete 02:46:19[ 553.301629] ata1.00: configured for UDMA/33 02:46:19[ 553.301637] ata1: EH complete

  Read the article

• MacBook Pro Late 2009 SATA Resets, Slowness (Is my motherboard dying on both machines?)

  - by A Student at a University

  My MacBook Pro runs slower the longer it's on. I am getting kernel warnings. Some, but not all, resets correlate with AC power connects and disconnects. I don't think the warnings do. (How do I tell?) What are these errors? What causes them? Can this damage the drive or corrupt data? What is it seeing that motivates these? 02:37:16[ 0.791992] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20 02:37:16[ 0.792047] ahci 0000:00:0b.0: irq 43 for MSI/MSI-X 02:37:16[ 0.792053] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP 02:37:16[ 0.792104] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 1.5 Gbps 0x3 impl IDE mode 02:37:16[ 0.792107] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh 02:37:16[ 0.792111] ahci 0000:00:0b.0: setting latency timer to 64 02:37:16[ 0.813473] scsi0 : ahci 02:37:16[ 0.823340] scsi1 : ahci 02:37:16[ 0.848164] ata1: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484100 irq 43 02:37:16[ 0.848166] ata2: SATA max UDMA/133 abar m8192@0xe7484000 port 0xe7484180 irq 43 02:37:16[ 1.190132] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.190153] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.213568] ata1.00: ATA-8: OCZ-VERTEX2, 1.23, max UDMA/133 02:37:16[ 1.213572] ata1.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32) 02:37:16[ 1.227293] ata2.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133 02:37:16[ 1.227297] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) 02:37:16[ 1.229570] ata2.00: configured for UDMA/133 02:37:16[ 1.240120] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.240123] ata2: irq_stat 0x00000040, connection status changed 02:37:16[ 1.240127] ata2: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.240133] ata2: hard resetting link 02:37:16[ 1.260738] ata1.00: configured for UDMA/133 02:37:16[ 1.280111] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:37:16[ 1.280114] ata1: irq_stat 0x00000040, connection status changed 02:37:16[ 1.280118] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:37:16[ 1.280122] ata1: hard resetting link 02:37:16[ 1.990101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 1.994215] ata2.00: configured for UDMA/133 02:37:16[ 1.994220] ata2: EH complete 02:37:16[ 2.030097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:16[ 2.090773] ata1.00: configured for UDMA/133 02:37:16[ 2.090778] ata1: EH complete 02:37:16[ 2.090931] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.23 PQ: 0 ANSI: 5 02:37:16[ 2.091045] sd 0:0:0:0: Attached scsi generic sg0 type 0 02:37:16[ 2.091121] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) 02:37:16[ 2.091159] scsi 1:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5 02:37:16[ 2.091163] sd 0:0:0:0: [sda] Write Protect is off 02:37:16[ 2.091165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 02:37:16[ 2.091183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.091252] sd 1:0:0:0: Attached scsi generic sg1 type 0 02:37:16[ 2.091446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) 02:37:16[ 2.091580] sd 1:0:0:0: [sdb] Write Protect is off 02:37:16[ 2.091582] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 02:37:16[ 2.091637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 02:37:16[ 2.093140] sd 0:0:0:0: [sda] Attached SCSI disk 02:37:16[ 2.093773] sd 1:0:0:0: [sdb] Attached SCSI disk 02:37:16[ 2.693899] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 02:37:16[ 5.483492] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro 02:37:16[ 7.905040] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) 02:37:25[ 19.553095] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:25[ 19.555266] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:25[ 19.641532] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.641532] ata1: irq_stat 0x00000040, connection status changed 02:37:25[ 19.641532] ata1: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.641533] ata1: hard resetting link 02:37:25[ 19.642076] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:25[ 19.642078] ata2: irq_stat 0x00000040, connection status changed 02:37:25[ 19.642081] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:25[ 19.642084] ata2: hard resetting link 02:37:26[ 20.392606] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.392610] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:26[ 20.396697] ata2.00: configured for UDMA/133 02:37:26[ 20.396703] ata2: EH complete 02:37:26[ 20.451491] ata1.00: configured for UDMA/133 02:37:26[ 20.451498] ata1: EH complete 02:37:30[ 24.563725] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:37:30[ 24.565939] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:37:30[ 24.627236] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:37:30[ 24.627240] ata1: irq_stat 0x00000040, connection status changed 02:37:30[ 24.627242] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.627246] ata1: hard resetting link 02:37:30[ 24.632241] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:37:30[ 24.632244] ata2: irq_stat 0x00000040, connection status changed 02:37:30[ 24.632247] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:37:30[ 24.632250] ata2: hard resetting link 02:37:31[ 25.372582] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.382615] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 02:37:31[ 25.386782] ata2.00: configured for UDMA/133 02:37:31[ 25.386788] ata2: EH complete 02:37:31[ 25.431668] ata1.00: configured for UDMA/133 02:37:31[ 25.431674] ata1: EH complete 02:45:54[ 529.141844] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:55[ 529.544529] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:55[ 529.622561] ata1: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622568] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:55[ 529.622572] ata1: irq_stat 0x00400040, connection status changed 02:45:55[ 529.622576] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622583] ata1: hard resetting link 02:45:55[ 529.622609] ata2: limiting SATA link speed to 1.5 Gbps 02:45:55[ 529.622613] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:55[ 529.622616] ata2: irq_stat 0x00000040, connection status changed 02:45:55[ 529.622620] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:55[ 529.622624] ata2: hard resetting link 02:45:56[ 530.380135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.380157] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:56[ 530.384305] ata2.00: configured for UDMA/133 02:45:56[ 530.384314] ata2: EH complete 02:45:56[ 530.399225] ata1.00: configured for UDMA/133 02:45:56[ 530.399233] ata1: EH complete 02:45:58[ 532.395990] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:45:58[ 532.518270] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:45:58[ 532.590968] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5840000 action 0xe frozen t4 02:45:58[ 532.590973] ata1: irq_stat 0x00000040, connection status changed 02:45:58[ 532.590977] ata1: SError: { CommWake LinkSeq TrStaTrns DevExch } 02:45:58[ 532.590983] ata1: hard resetting link 02:45:58[ 532.591034] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:45:58[ 532.591037] ata2: irq_stat 0x00000040, connection status changed 02:45:58[ 532.591041] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:58[ 532.591045] ata2: hard resetting link 02:45:59[ 533.340147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.340168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:45:59[ 533.344416] ata2.00: configured for UDMA/133 02:45:59[ 533.344424] ata2: EH complete 02:45:59[ 533.360839] ata1.00: configured for UDMA/133 02:45:59[ 533.360847] ata1: EH complete 02:45:59[ 533.584449] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:45:59[ 533.586999] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:45:59[ 533.660117] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:45:59[ 533.660122] ata2: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660126] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660132] ata2: hard resetting link 02:45:59[ 533.660141] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:45:59[ 533.660143] ata1: irq_stat 0x00000040, connection status changed 02:45:59[ 533.660147] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:45:59[ 533.660151] ata1: hard resetting link 02:46:00[ 534.412536] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.412562] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:00[ 534.416768] ata2.00: configured for UDMA/133 02:46:00[ 534.416777] ata2: EH complete 02:46:00[ 534.431396] ata1.00: configured for UDMA/133 02:46:00[ 534.431401] ata1: EH complete 02:46:03[ 537.384649] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:03[ 537.504214] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:03[ 537.585992] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:03[ 537.585996] ata1: irq_stat 0x00000040, connection status changed 02:46:03[ 537.585999] ata1: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586002] ata1: hard resetting link 02:46:03[ 537.586028] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen t4 02:46:03[ 537.586030] ata2: irq_stat 0x00000040, connection status changed 02:46:03[ 537.586033] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:03[ 537.586036] ata2: hard resetting link 02:46:04[ 538.330147] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.330168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:04[ 538.334389] ata2.00: configured for UDMA/133 02:46:04[ 538.334398] ata2: EH complete 02:46:04[ 538.343511] ata1.00: configured for UDMA/133 02:46:04[ 538.343519] ata1: EH complete 02:46:04[ 538.456413] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 02:46:04[ 538.459404] EXT4-fs (dm-2): re-mounted. Opts: commit=0 02:46:04[ 538.540138] ata1.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540144] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5850000 action 0xe frozen 02:46:04[ 538.540148] ata1: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540153] ata1: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540159] ata1: hard resetting link 02:46:04[ 538.540202] ata2.00: limiting speed to UDMA/100:PIO4 02:46:04[ 538.540207] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5950000 action 0xe frozen 02:46:04[ 538.540211] ata2: irq_stat 0x00000040, connection status changed 02:46:04[ 538.540215] ata2: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns DevExch } 02:46:04[ 538.540220] ata2: hard resetting link 02:46:05[ 539.290054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.290041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:05[ 539.294100] ata2.00: configured for UDMA/100 02:46:05[ 539.294106] ata2: EH complete 02:46:05[ 539.314125] ata1.00: configured for UDMA/100 02:46:05[ 539.314132] ------------[ cut here ]------------ 02:46:05[ 539.314140] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:05[ 539.314144] Hardware name: MacBookPro5,3 02:46:05[ 539.314146] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:05[ 539.314221] Pid: 202, comm: scsi_eh_0 Tainted: P 2.6.35-25-generic #44-Ubuntu 02:46:05[ 539.314224] Call Trace: 02:46:05[ 539.314233] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:05[ 539.314237] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:05[ 539.314242] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:05[ 539.314246] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:05[ 539.314256] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:05[ 539.314261] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:05[ 539.314266] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:05[ 539.314270] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:05[ 539.314275] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:05[ 539.314280] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:05[ 539.314284] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:05[ 539.314288] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:05[ 539.314291] ---[ end trace 76dbffc2d5d49d9b ]--- 02:46:05[ 539.314296] ata1: EH complete 02:46:12[ 547.040091] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen 02:46:12[ 547.040098] ata1.00: failed command: IDENTIFY DEVICE 02:46:12[ 547.040106] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in 02:46:12[ 547.040108] res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) 02:46:12[ 547.040111] ata1.00: status: { DRDY } 02:46:12[ 547.040117] ata1: hard resetting link 02:46:13[ 547.390144] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:13[ 547.408430] ata1.00: configured for UDMA/100 02:46:13[ 547.408438] ------------[ cut here ]------------ 02:46:13[ 547.408447] WARNING: at /build/buildd/linux-2.6.35/drivers/ata/libata-eh.c:3638 ata_eh_finish+0xdf/0xf0() 02:46:13[ 547.408451] Hardware name: MacBookPro5,3 02:46:13[ 547.408453] Modules linked in: michael_mic arc4 xt_multiport binfmt_misc rfcomm sco bnep l2cap parport_pc ppdev nvidia(P) ipt_REJECT xt_recent snd_hda_codec_cirrus xt_limit xt_tcpudp ipt_addrtype xt_state snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi applesmc led_class ip6table_filter lib80211_crypt_tkip snd_rawmidi snd_seq_midi_event ip6_tables input_polldev hid_apple snd_seq wl(P) snd_timer snd_seq_device snd joydev bcm5974 usbhid mbp_nvidia_bl uvcvideo btusb videodev v4l1_compat v4l2_compat_ioctl32 nf_nat_irc hid nf_conntrack_irc soundcore snd_page_alloc i2c_nforce2 coretemp lib80211 bluetooth nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack lp parport iptable_filter ip_tables x_tables usb_storage firewire_ohci firewire_core forcedeth crc_itu_t ahci libahci 02:46:13[ 547.408528] Pid: 202, comm: scsi_eh_0 Tainted: P W 2.6.35-25-generic #44-Ubuntu 02:46:13[ 547.408531] Call Trace: 02:46:13[ 547.408540] [<ffffffff8106091f>] warn_slowpath_common+0x7f/0xc0 02:46:13[ 547.408544] [<ffffffff8106097a>] warn_slowpath_null+0x1a/0x20 02:46:13[ 547.408549] [<ffffffff813dc77f>] ata_eh_finish+0xdf/0xf0 02:46:13[ 547.408553] [<ffffffff813e441e>] sata_pmp_error_handler+0x2e/0x40 02:46:13[ 547.408563] [<ffffffffa00021bf>] ahci_error_handler+0x1f/0x90 [libahci] 02:46:13[ 547.408567] [<ffffffff813dd6d2>] ata_scsi_error+0x492/0x5e0 02:46:13[ 547.408572] [<ffffffff813b24cd>] scsi_error_handler+0x10d/0x190 02:46:13[ 547.408577] [<ffffffff813b23c0>] ? scsi_error_handler+0x0/0x190 02:46:13[ 547.408582] [<ffffffff8107f266>] kthread+0x96/0xa0 02:46:13[ 547.408587] [<ffffffff8100aee4>] kernel_thread_helper+0x4/0x10 02:46:13[ 547.408591] [<ffffffff8107f1d0>] ? kthread+0x0/0xa0 02:46:13[ 547.408595] [<ffffffff8100aee0>] ? kernel_thread_helper+0x0/0x10 02:46:13[ 547.408598] ---[ end trace 76dbffc2d5d49d9c ]--- 02:46:13[ 547.408620] ata1: EH complete 02:46:13[ 547.562470] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:13[ 547.671380] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:13[ 547.738198] ata1.00: limiting speed to UDMA/33:PIO4 02:46:13[ 547.738204] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:13[ 547.738208] ata1: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738212] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738218] ata1: hard resetting link 02:46:13[ 547.738262] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5900000 action 0xe frozen t4 02:46:13[ 547.738265] ata2: irq_stat 0x00000040, connection status changed 02:46:13[ 547.738269] ata2: SError: { Dispar LinkSeq TrStaTrns DevExch } 02:46:13[ 547.738274] ata2: hard resetting link 02:46:14[ 548.482561] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.484083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:14[ 548.486809] ata2.00: configured for UDMA/100 02:46:14[ 548.486818] ata2: EH complete 02:46:14[ 548.498998] ata1.00: configured for UDMA/33 02:46:14[ 548.499004] ata1: EH complete 02:46:18[ 552.410499] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=600 02:46:18[ 552.522521] EXT4-fs (dm-2): re-mounted. Opts: commit=600 02:46:18[ 552.529674] ata1: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529678] ata1: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529680] ata1: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529684] ata1: hard resetting link 02:46:18[ 552.529716] ata2: exception Emask 0x10 SAct 0x0 SErr 0x5800000 action 0xe frozen t4 02:46:18[ 552.529718] ata2: irq_stat 0x00000040, connection status changed 02:46:18[ 552.529720] ata2: SError: { LinkSeq TrStaTrns DevExch } 02:46:18[ 552.529723] ata2: hard resetting link 02:46:19[ 553.280059] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.280068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) 02:46:19[ 553.284141] ata2.00: configured for UDMA/100 02:46:19[ 553.284150] ata2: EH complete 02:46:19[ 553.301629] ata1.00: configured for UDMA/33 02:46:19[ 553.301637] ata1: EH complete

  Read the article

• Modularity through HTTP

  - by Michael Williamson

  As programmers, we strive for modularity in the code we write. We hope that splitting the problem up makes it easier to solve, and allows us to reuse parts of our code in other applications. Object-orientation is the most obvious of many attempts to get us closer to this ideal, and yet one of the most successful approaches is almost accidental: the web. Programming languages provide us with functions and classes, and plenty of other ways to modularize our code. This allows us to take our large problem, split it into small parts, and solve those small parts without having to worry about the whole. It also makes it easier to reason about our code. So far, so good, but now that we’ve written our small, independent module, for example to send out e-mails to my customers, we’d like to reuse it in another application. By creating DLLs, JARs or our platform’s package container of choice, we can do just that – provided our new application is on the same platform. Want to use a Java library from C#? Well, good luck – it might be possible, but it’s not going to be smooth sailing. Even if a library exists, it doesn’t mean that using it going to be a pleasant experience. Say I want to use Java to write out an XML document to an output stream. You’d imagine this would be a simple one-liner. You’d be wrong: import org.w3c.dom.*; import java.io.*; import javax.xml.transform.*; import javax.xml.transform.dom.*; import javax.xml.transform.stream.*; private static final void writeDoc(Document doc, OutputStream out) throws IOException { try { Transformer t = TransformerFactory.newInstance().newTransformer(); t.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, doc.getDoctype().getSystemId()); t.transform(new DOMSource(doc), new StreamResult(out)); } catch (TransformerException e) { throw new AssertionError(e); // Can't happen! } } Most of the time, there is a good chance somebody else has written the code before, but if nobody can understand the interface to that code, nobody’s going to use it. The result is that most of the code we write is just a variation on a theme. Despite our best efforts, we’ve fallen a little short of our ideal, but the web brings us closer. If we want to send e-mails to our customers, we could write an e-mail-sending library. More likely, we’d use an existing one for our language. Even then, we probably wouldn’t have niceties like A/B testing or DKIM signing. Alternatively, we could just fire some HTTP requests at MailChimp, and get a whole slew of features without getting anywhere near the code that implements them. The web is inherently language agnostic. So long as your language can send and receive text over HTTP, and probably parse some JSON, you’re about as well equipped as anybody. Instead of building libraries for a specific language, we can build a service that almost every language can reuse. The text-based nature of HTTP also helps to limit the complexity of the API. As SOAP will attest, you can still make a horrible mess using HTTP, but at least it is an obvious horrible mess. Complex data structures are tedious to marshal to and from text, providing a strong incentive to keep things simple. By contrast, spotting the complexities in a class hierarchy is often not as easy. HTTP doesn’t solve every problem. It probably isn’t such a good idea to use it inside an inner loop that’s executed thousands of times per second. What’s more, the HTTP approach might introduce some new problems. We often need to add a thin shim to each application that we wish to communicate over HTTP. For instance, we might need to write a small plugin in PHP if we want to integrate WordPress into our system. Suddenly, instead of a system written in one language, we’re maintaining a system with several distinct languages and platforms. Even then, we should strive to avoid re-implementing the same old thing. As programmers, we consistently underestimate both the cost of building a system and the ongoing maintenance. If we allow ourselves to integrate existing applications, even if they’re in unfamiliar languages, we save ourselves those development and maintenance costs, as well as being able to pick the best solution for our problem. Thanks to the web, HTTP is often the easiest way to get there.

  Read the article

• ??Database Replay Capture????

  - by Liu Maclean(???)

  Database Replay?11g??????,??workload capture??????????????,???????? ??Workload Capture???????: ???????????????,???????2????,??????,???????????OLTP???????capture 10????1G???? ?????: ????????????????????? ??startup restrict????,?????????? ??capture???restrict?? ????????????? ???????????????: ??scn???????? ???????? ???????? Capture???????????workload????? ???????SYSDBA?SYSOPER????OS?? ????: ?TPCC???capture??????4.5% ????session????64KB??? ???Workload Capture?????????? ????????2?, ??RAC????workload capture  file??????????????,??start_capture????? ????session????64KB???,??????????????workload  capture file????Server Process??????,?????????parse???execution????,Server Process??LOGON?LOGOFF?SQL??????????PGA?,???WCR Capture PG?WCR Capture PGA?,?PGA?????????????????,Server Process???????????WCR???,?????WCR???Server Process??’WCR: capture file IO write’????? ?WCR?????????: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select name from v$event_name where name like '%WCR%'; NAME ---------------------------------------------------------------- WCR: replay client notify WCR: replay clock WCR: replay lock order WCR: replay paused WCR: RAC message context busy WCR: capture file IO write WCR: Sync context busy latch: WCR: sync latch: WCR: processes HT 11g????????WCR???LATCH 1* select name,gets from v$latch where name like '%WCR%' SQL> / NAME GETS ------------------------------ ---------- WCR: kecu cas mem 3 WCR: kecr File Count 37 WCR: MMON Create dir 1 WCR: ticker cache 0 WCR: sync 495 WCR: processes HT 0 WCR: MTS VC queue 0 7 rows selected. ????????????Database Replay Capture????? 1. ????capture dbms_workload_capture.start_capture CREATE OR REPLACE DIRECTORY dbcapture AS '/home/oracle/dbcapture'; execute dbms_workload_capture.start_capture('CAPTURE','DBCAPTURE',default_action=>'INCLUDE'); SQL> select id,name,status,start_time,end_time,connects,user_calls,dir_path from dba_workload_captures where id = (select max(id) from dba_workload_captures) ; ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 1 CAPTURE IN PROGRESS 08-DEC-12 11 ID ---------- NAME -------------------------------------------------------------------------------- STATUS START_TIM END_TIME CONNECTS ---------------------------------------- --------- --------- ---------- USER_CALLS ---------- DIR_PATH -------------------------------------------------------------------------------- 167 /home/oracle/dbcapture 2. ?? capture file?? [oracle@mlab2 dbcapture]$ ls -lR .: total 8 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 cap drwxr-xr-x 3 oracle oinstall 4096 Dec 8 07:24 capfiles -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:24 wcr_cap_00001.start ./cap: total 4 -rw-r--r-- 1 oracle oinstall 91 Dec 8 07:24 wcr_scapture.wmd ./capfiles: total 4 drwxr-xr-x 12 oracle oinstall 4096 Dec 8 07:24 inst1 ./capfiles/inst1: total 40 drwxr-xr-x 2 oracle oinstall 4096 Dec 8 08:31 aa drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ab drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ac drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ad drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ae drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 af drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ag drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ah drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 ai drwxr-xr-x 2 oracle oinstall 4096 Dec 8 07:24 aj ./capfiles/inst1/aa: total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec ./capfiles/inst1/ab: total 0 ./capfiles/inst1/ac: total 0 ./capfiles/inst1/ad: total 0 ./capfiles/inst1/ae: total 0 ./capfiles/inst1/af: total 0 ./capfiles/inst1/ag: total 0 ./capfiles/inst1/ah: total 0 ./capfiles/inst1/ai: total 0 ./capfiles/inst1/aj: total 0 [oracle@mlab2 dbcapture]$ cd ./capfiles/inst1/aa [oracle@mlab2 aa]$ ls -l total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec [oracle@mlab2 aa]$ ls -l |wc -l 14 ???????14??? 3. ??LOGON????Server Process [oracle@mlab2 ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Sat Dec 8 08:37:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options ?????wcr?? [oracle@mlab2 aa]$ ls -ltr total 316 -rw-r--r-- 1 oracle oinstall 1762 Dec 8 07:25 wcr_c6cdah0000001.rec -rw-r--r-- 1 oracle oinstall 16478 Dec 8 07:28 wcr_c6cf1h0000002.rec -rw-r--r-- 1 oracle oinstall 1772 Dec 8 07:29 wcr_c6cjdh0000004.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:29 wcr_c6cnah0000005.rec -rw-r--r-- 1 oracle oinstall 1815 Dec 8 07:33 wcr_c6cq6h000000a.rec -rw-r--r-- 1 oracle oinstall 1535 Dec 8 07:34 wcr_c6cxmh000000h.rec -rw-r--r-- 1 oracle oinstall 1425 Dec 8 07:41 wcr_c6czph000000k.rec -rw-r--r-- 1 oracle oinstall 1427 Dec 8 07:41 wcr_c6cxvh000000j.rec -rw-r--r-- 1 oracle oinstall 1821 Dec 8 07:41 wcr_c6cpfh0000007.rec -rw-r--r-- 1 oracle oinstall 2398 Dec 8 07:49 wcr_c6dqfh000000q.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 07:55 wcr_c6f6yh000000t.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:28 wcr_c6h3qh0000013.rec -rw-r--r-- 1 oracle oinstall 259321 Dec 8 08:35 wcr_c6du7h000000r.rec -rw-r--r-- 1 oracle oinstall 0 Dec 8 08:37 wcr_c6hp4h0000018.rec ??????wcr_c6hp4h0000018.rec ??? SQL> select spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID ------------------------ 14293 ????????????????14293, ???????????????,??????wcr_c6hp4h0000018.rec [oracle@mlab2 ~]$ ls -l /proc/14293/fd total 0 lr-x------ 1 oracle oinstall 64 Dec 8 08:39 0 -> /dev/null l-wx------ 1 oracle oinstall 64 Dec 8 08:39 1 -> /dev/null lrwx------ 1 oracle oinstall 64 Dec 8 08:39 10 -> /u01/app/oracle/product/11201/db_1/rdbms/audit/CRMV_ora_14293_1.aud l-wx------ 1 oracle oinstall 64 Dec 8 08:39 11 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc l-wx------ 1 oracle oinstall 64 Dec 8 08:39 12 -> pipe:[34585895] l-wx------ 1 oracle oinstall 64 Dec 8 08:39 13 -> /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trm l-wx------ 1 oracle oinstall 64 Dec 8 08:39 2 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 3 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 4 -> /dev/null lr-x------ 1 oracle oinstall 64 Dec 8 08:39 5 -> /u01/app/oracle/product/11201/db_1/rdbms/mesg/oraus.msb lr-x------ 1 oracle oinstall 64 Dec 8 08:39 6 -> /proc/14293/fd lr-x------ 1 oracle oinstall 64 Dec 8 08:39 7 -> /dev/zero lrwx------ 1 oracle oinstall 64 Dec 8 08:39 8 -> /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec lr-x------ 1 oracle oinstall 64 Dec 8 08:39 9 -> pipe:[34585894] ?????lsof?? [root@mlab2 ~]# lsof|grep wcr_c6hp4h0000018.rec oracle 14293 oracle 8u REG 8,1 0 17629644 /home/oracle/dbcapture/capfiles/inst1/aa/wcr_c6hp4h0000018.rec ????????,??Server Process????WCR REC??,?Server Process LOGON?????? 3.????SQL??: SQL> select 1 from dual; 1 ---------- 1 SQL> / 1 ---------- 1 [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec ==»????SQL????, ??????? ??????SQL???,???????????????WCR??????,LOGON???????????SQL????,????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 11.2.0.3.0 *File header info. (Shadow process='14293') D0576B5D710A34F4E043B201A8C0ECFE SYS; NLS_LANGUAGE? AMERICAN> NLS_TERRITORY? AMERICA> NLS_CURRENCY? NLS_ISO_CURRENCY? AMERICA> NLS_NUMERIC_CHARACTERS? NLS_CALENDAR? GREGORIAN> NLS_DATE_FORMAT? DD-MON-RR> NLS_DATE_LANGUAGE? AMERICAN> NLS_CHARACTERSET? AL32UTF8> NLS_SORT? BINARY> NLS_TIME_FORMAT? HH.MI.SSXFF AM> NLS_TIMESTAMP_FORMAT? DD-MON-RR HH.MI.SSXFF AM> NLS_TIME_TZ_FORMAT? HH.MI.SSXFF AM TZR> NLS_TIMESTAMP_TZ_FORMAT? DD-MON-RR HH.MI.SSXFF AM TZR> NLS_DUAL_CURRENCY? NLS_SPECIAL_CHARS? NLS_NCHAR_CHARACTERSET? UTF8> NLS_COMP? BINARY> NLS_LENGTH_SEMANTICS? BYTE> NLS_NCHAR_CONV_EXCP? FALSE (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/u01/app/oracle/product/11201/db_1/bin/oracle)(ARGV0=oracleCRMV)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=mlab2.oracle.com)(USER=oracle)))) ,[email protected] (TNS V1-V3)U tselect spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)) ` _ select 1 from dual select 1 from dual ??????????????????? [oracle@mlab2 aa]$ strings wcr_c6hp4h0000018.rec 9`9_^B create table vva(t1 int) `:_i :`:_iB `;_^ ;`;_^B create table vva(t1 int) `_i >`>_iB FusC `?_^ ?`?_^B FvWC _begin for i in 1..50000 loop execute immediate 'select 1 from dual where 2='||i; end loop; end; ?SERVER PROCESS LOGOFF ??????? C`E_ B k^2C ????Server Process????parse?execution???WCR??,??????????PGA?,????????????,????????,?????WCR???????????,???????? 4. ?????? SQL> oradebug setmypid Statement processed. SQL> oradebug dump processstate 10; Statement processed. SQL> oradebug tracefile_name /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc ?processstate ??????????????? WCR: capture file IO write,??Server process??WCR ?? 3: waited for 'SQL*Net message to client' driver id=0x62657100, #bytes=0x1, =0x0 wait_id=139 seq_num=140 snap_id=1 wait times: snap=0.000007 sec, exc=0.000007 sec, total=0.000007 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 0.934091 sec of elapsed time 4: waited for 'latch: shared pool' address=0x60106b20, number=0x133, tries=0x0 wait_id=138 seq_num=139 snap_id=1 wait times: snap=0.000066 sec, exc=0.000066 sec, total=0.000066 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 1.180690 sec of elapsed time 5: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=137 seq_num=138 snap_id=1 wait times: snap=0.000189 sec, exc=0.000189 sec, total=0.000189 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.122783 sec of elapsed time 6: waited for 'WCR: capture file IO write' =0x0, =0x0, =0x0 wait_id=136 seq_num=137 snap_id=1 wait times: snap=0.000191 sec, exc=0.000191 sec, total=0.000191 sec wait times: max=infinite wait counts: calls=0 os=0 occurred after 3.053132 sec of elapsed time 7: waited for 'WCR: capture file IO write' 5.??PGA???? SQL> oradebug dump heapdump 536870917; Statement processed. grep WCR /u01/app/oracle/diag/rdbms/crmv/CRMV/trace/CRMV_ora_14293.trc Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6111e18 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6112e98 sz= 4184 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6113ef0 sz= 4224 freeable "WCR Capture PG " ds=0x7fb1b6115f90 Chunk 7fb1b6114f70 sz= 4104 recreate "WCR Capture PG " latch=(nil) Chunk 7fb1b6115f78 sz= 160 freeable "WCR Capture PGA" Chunk 7fb1b6116018 sz= 3248 freeable "WCR Capture PGA" Subheap ds=0x7fb1b6115f90 heap name= WCR Capture PG size= 82336 HEAP DUMP heap name="WCR Capture PG" desc=0x7fb1b6115f90 FIVE LARGEST SUB HEAPS for heap name="WCR Capture PG" desc=0x7fb1b6115f9 PGA???WCR Capture PG ?WCR Capture PGA?freeable or recreate??chunk,???????Server Process???OS Chunk 7fb1b606bfc0 sz= 65600 freeable "WCR Capture PG " ds=0x7fb1b6115f90 sz= 65600=» 64k ??????????64k??,???????????????64k WCR????????????:)! 6.???? ??WCR CAPTURE????????2? SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm in ('_capture_buffer_size','_wcr_control'); NAME VALUE DESCRIB -------------------- -------------------- ------------------------------------------------------------ _wcr_control 0 Oracle internal test WCR parameter used ONLY for testing! _capture_buffer_size 65536 To set the size of the PGA I/O recording buffers ??_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k _wcr_control ??WCR?????,?????? ????,??????: 1. ???WCR WORKLOAD CAPTURE???????????,??Server Process????(????)2. ???server process????WCR??3. Server Proess???LOGON?LOGOFF?SQL?????????WCR???4. Server Process????????Immediate mode,????????PGA?(WCR Capture) subheap?,??????????????(timeout?????)5. ????, Server Process????????Immediate mode,?capture????parse??execution??(?????capture???parse?????????????,parse????capture???),?????LOGON?SQL??(???????)??PGA?WCR Capture?????,???????,????????,??tpcc??????4.5%6. ????_capture_buffer_size ??PGA?WCR BUFFER?SIZE,???64k7. WCR Capture?????binrary 2????,?????,????????????????WCR capture file8. WCR: capture file IO write?????Server Process??WCR??

  Read the article

• Java homework help, Error <identifier> expected

  - by user2900126

  Help with java homework this is my assignment that I have, this assignment code I've tried. But when I try to compile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () Assignment brief To write a simple java classMobile that models a mobile phone. Details the information stored about each mobile phone will include • Its type e.g. “Sony ericsson x90” or “Samsung Galaxy S”; • Its screen size in inches; You may assume that this a whole number from the scale 3 to 5 inclusive. • Its memory card capacity in gigabytes You may assume that this a whole number • The name of its present service provider You may assume this is a single line of text. • The type of contract with service provider You may assume this is a single line of text. • Its camera resolution in megapixels; You should not assume that this a whole number; • The percentage of charge left on the phone e.g. a fully charged phone will have a charge of 100. You may assume that this a whole number • Whether the phone has GPS or not. Your class will have fields corresponding to these attributes . Start by opening BlueJ, creating a new project called myMobile which has a classMobile and set up the fields that you need, Next you will need to write a Constructor for the class. Assume that each phone is manufactured by creating an object and specifying its type, its screen size, its memory card capacity, its camera resolution and whether it has GPS or not. Therefore you will need a constructor that allows you to pass arguments to initialise these five attributes. Other fields should be set to appropriate default values. You may assume that a new phone comes fully charged. When the phone is sold to its owner, you will need to set the service provider and type of contract with that provider so you will need mutator methods • setProvider () - - to set service provider. • setContractType - - to set the type of contract These methods will be used when the phones provider is changed. You should also write a mutator method ChargeUp () which simulates fully charging the phone. To obtain information about your mobile object you should write • accessor methods corresponding to four of its fields: • getType () – which returns the type of mobile; • getProvider () – which returns the present service provider; • getContractType () – which returns its type of contract; • getCharge () – which returns its remaining charge. An accessor method to printDetails () to print, to the terminal window, a report about the phone e.g. This mobile phone is a sony Erricsson X90 with Service provider BigAl and type of contract PAYG. At present it has 30% of its battery charge remaining. Check that the new method works correctly by for example, • creating a Mobile object and setting its fields; • calling printDetails () and t=checking the report corresponds to the details you have just given the mobile; • changing the service provider and contract type by calling setprovider () and setContractType (); • calling printDetails () and checking the report now prints out the new details. Challenging excercises • write a mutator methodswitchedOnFor () =which simulates using the phone for a specified period. You may assume the phone loses 1% of its charge for each hour that it is switched on . • write an accessor method checkcharge () whichg checks the phone remaing charge. If this charge has a value less than 25%, then this method returns a string containg the message Be aware that you will soon need to re-charge your phone, otherwise it returns a string your phone charge is sufficient. • Write a method changeProvider () which simulates changing the provider (and presumably also the type of service contract). Finally you may add up to four additional fields, with appropriate methods, that might be required in a more detailed model. above is my assignment that I have, this assignment code I've tried. But when I try to oompile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () /** * to write a simple java class Mobile that models a mobile phone. * * @author (Lewis Burte-Clarke) * @version (14/10/13) */ public class Mobile { // type of phone private String phonetype; // size of screen in inches private int screensize; // menory card capacity private int memorycardcapacity; // name of present service provider private String serviceprovider; // type of contract with service provider private int typeofcontract; // camera resolution in megapixels private int cameraresolution; // the percentage of charge left on the phone private int checkcharge; // wether the phone has GPS or not private String GPS; // instance variables - replace the example below with your own private int x; // The constructor method public Mobile(String mobilephonetype, int mobilescreensize, int mobilememorycardcapacity,int mobilecameraresolution,String mobileGPS, String newserviceprovider) { this.phonetype = mobilephonetype; this.screensize = mobilescreensize; this.memorycardcapacity = mobilememorycardcapacity; this.cameraresolution = mobilecameraresolution; this.GPS = mobileGPS; // you do not use this ones during instantiation,you can remove them if you do not need or assign them some default values //this.serviceprovider = newserviceprovider; //this.typeofcontract = 12; //this.checkcharge = checkcharge; Mobile samsungPhone = new Mobile("Samsung", "1024", "2", "verizon", "8", "GPS"); 1024 = screensize; 2 = memorycardcapacity; 8 = resolution; GPS = gps; "verizon"=serviceprovider; //typeofcontract = 12; //checkcharge = checkcharge; } // A method to display the state of the object to the screen public void displayMobileDetails() { System.out.println("phonetype: " + phonetype); System.out.println("screensize: " + screensize); System.out.println("memorycardcapacity: " + memorycardcapacity); System.out.println("cameraresolution: " + cameraresolution); System.out.println("GPS: " + GPS); System.out.println("serviceprovider: " + serviceprovider); System.out.println("typeofcontract: " + typeofcontract); } /** * The mymobile class implements an application that * simply displays "new Mobile!" to the standard output. */ public class mymobile { public static void main(String[] args) { System.out.println("new Mobile!"); //Display the string. } } public static void buildPhones(){ Mobile Samsung = new Mobile("Samsung", "3.0", "4gb", "8mega pixels", "GPS"); Mobile Blackberry = new Mobile("Blackberry", "3.0", "4gb", "8mega pixels", "GPS"); Samsung.displayMobileDetails(); Blackberry.displayMobileDetails(); } public static void main(String[] args) { buildPhones(); } } any answers.replies and help would be greatly appreciated as I really lost!

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• Why did my flash drive become "read only" and (how) can I fix it?

  - by Bob

  I have a brand new flash drive (one week old) that has become marked as read only, by Windows, Kubuntu and a bootable partitioner. Why did this happen? Is it fixable? If it is, how can I fix this? The problem Firstly, this drive is new. It's certainly not been used enough to die from normal wear and tear, though I would not discount defective components. The drive itself has somehow become locked in a read only state. Windows' Disk management: Diskpart: Generic Flash Disk USB Device Disk ID: 33FA33FA Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : Yes Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No What really confuses me is Current Read-only State : Yes and Read-only : No. Attempted solutions So far, I've tried: Formatting it in Windows (in Disk management, the format options are greyed out when right clicking). DiskPart Clean (CLEAN - Clear the configuration information, or all information, off the disk.): DISKPART> clean DiskPart has encountered an error: The media is write protected. See the System Event Log for more information. There was nothing in the event log. Windows command line format >format G: Insert new disk for drive G: and press ENTER when ready... The type of the file system is FAT32. Verifying 7740M Cannot format. This volume is write protected. Windows chkdsk: see below for details Kubuntu fsck (through VirtualBox USB passthrough): see below for details Acronis True Image to format, to convert to GPT, to destroy and rebuild MBR, basically anything: failed (could not write to MBR) Details (and a nice story) Background This was a brand new, generic, 8GB flash drive I wanted to create a multiboot flash drive with. It came formatted as FAT32, though oddly a little larger than most 8 GIGAbyte flash drives I've come across. Approximately 127MB was listed as "used" by Windows. I never discovered why. The end usable space was about what I normally expect from a 8GB drive (approx 7.4 GIBIbytes). I had thrown quite a few Linux distros on, along with a copy of Hiren's. They would all boot perfectly. They were put on with YUMI. When I tried to put the Knoppix DVD on, YUMI added an odd video option to its boot comman which caused Knoppix to boot with a black screen on X. ttys 1 through 6 still worked as text only interfaces. A few days later, I took some time to take that odd video option off, making the boot command match the one that comes with Knoppix. On the attempt to boot, Knoppix reported some form of LZMA corruption. Leading up to the current issue I was thinking the Knoppix files may have been corrupted somehow, so I tried reloading it. The drive was nearly full (45MB free), so I deleted a generic ISO that also was not booting. That went fine. I then went through YUMI to 'uninstall' Knoppix, i.e. delete files and remove from the menus. The files went first, then the menus were cleared successfully. However, the free space was stuck at about 700MB, same as it was before removing Knoppix. In the old Knoppix folder, there was a 0 byte file named KNOPPIX that could not be deleted. I tried reinserting the drive to delete this file - without safely removing, if that made a difference (hey, first time for everything). Running the standard Windows chkdsk scan without /r or /f reported errors found. Running with /r just got it stuck. I decided to give fsck a shot, so I loaded up my Kubuntu VM and attached the drive to it with VirtualBox's USB 2.0 passthrough. I umounted it (/dev/sda1) and ran a fsck. There are differences between boot sector and its backup. I chose No action. It told me FATs differ and asked me to select either the first or second FAT. Whichever I selected, I got a notice of Free cluster summary wrong. If I chose Correct, it gave a list of incorrect file names. To try to fix something, at least, I ran it with the -p option. Halfway through fixing the files, the VM froze - I ended its process about ten minutes later. Cause? My next attempt was to use YUMI, again, to rebuild the whole drive. I used YUMI's built in reformat (to FAT32) option and installed a Kubuntu ISO (700MB). The format was successful, however, the extract and copy of Kubuntu (which YUMI uses a 7zip binary for) froze at about 60% done. After waiting for about fifteen minutes (longer than the 3.5GB Knoppix ISO took last time), I pulled the drive out. The drive at this point was already formatted, SYSLINUX already installed, just waiting on the unpacking of an ISO and the modifying of the boot menus. Plugging it back in, it came up as normal - however, any write action would fail. Disk management reported it as read only. On reconnect, it would come up as normal but a write operation would cause it to go read only again. After a few attempts, it started coming up as read only on insertion. Attempts to fix This is when I ran through the attempts listed above, to try and reformat it in case of a faulty format. However the inability to do so even on a bootable disk indicated something more serious is wrong. chkdsk now reports nothing is wrong, and fsck still reports MBR inconsistencies, but now always chooses first FAT automatically after telling me FATs differ. It still does the same Free cluster summary wrong afterwards. I cannot run with -p anymore because it is now marked as read only. It also managed to corrupt my VM's disk somehow on the first attempt (yes, I'm sure I chose sda, which is mapped to a 7.4GB drive - I triple checked). Thank god for snapshots? I'm just about out of ideas. To my inexperienced mind it looks like something in the drive's firmware set it to read only "permanently" somehow - is there any way to reset this? I don't particularly care about keeping data, considering I've reformatted it twice. Also, fixes that keep me in Windows are better; it reduces the risk of me accidentally nuking my main hard drive. Update 1: I pulled apart the drive out of curiosity. As you can see, there are no obvious write protect switches. There is an IC on the other side, ALCOR branded labelled AU6989HL, if that matters. If there appears to be no way to fix this, I'll probably pull out the (glued down) card and put it in a card reader to check if it's the card or the controller that died. Update 2: I've pulled the card off, Windows detects the drive as a card reader now. The contacts on the card don't appear to be used, and there are several rows of holes on the card itself. Putting it into the card reader only detects about 30MB total, RAW. It's probably either the reader incorrectly reporting the card as faulty (as if a real SD card's write protect was switched on) or a bad contact somewhere. If nothing else, I have a spare 8GB Micro SD card now... as soon as I figure out how to format it as 8GB.

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• I&rsquo;m sorry RPGs, it&rsquo;s not you, it&rsquo;s me: The birth of my game idea

  - by George Clingerman

  One of the things I’ve had to give up in order to have some development time at night is gaming. It’s something I refused to admit for years but I’ve just had to face the facts. I’m no longer a gamer. I just don’t have hours and hours of free time to pour into gaming and when I do have hours and hours of free time I want to pour them into game development. That doesn’t mean I don’t game at all! I play games pretty much every day. It just means I’ve moved more into the casual game realm. It’s all I have time for when juggling priorities in my life. That means that games like Gears of War 2 sit shrink wrapped on my shelf and although I popped Dragon Age into my Xbox 360 one time, I barely made it through the opening sequence and haven’t had time to sit down and play again. Instead I’m playing short games like Jamestown, Atom Zombie Smasher, Fortix or if I have time to jump in and play a few rounds maybe some Monday Night Combat or Team Fortress 2. These are games I can instantly get into and play for just a short period of time and then walk away. Breath of Death VII saved my life: Back in the day (way, way back in the day) I used to be a pretty big RPG fan. Not big by a lot of RPG gamers' standards (most of the RPGs RPG fans about I’ve never heard of) but I used to LOVE to play them on the NES, SNES and Genesis and considered that my genre. Final Fantasy, Shining in the Darkness, Bard’s Tale, Faxanadu, Shadowrun, Ultima, Dragon Warrior, Chrono Trigger, Phantasy Star, Shining Force and well the list could go on but those are the ones I remember off the top of my head. I loved playing RPGs and they were my games of choice. After my first son was born (this was just about 12 years ago), I tried to continue playing RPGs and purchased games like Baldur’s Gate I & II, Neverwinter Nights, Fable, then a few of the Final Fantasy’s then Kingdom Hearts. I kept buying these games and then only playing for about fifteen minutes and never getting back to them. I still loved RPGs but they just no longer fit into my life (I still haven’t accepted that since I still purchased Dragon Age II for some reason and convinced myself I’d find the time). Adding three more sons to the mix (that’s 4 total) didn’t help much to finding more RPG time (except for Breath of Death VII and other XBLIG RPG titles, thanks guys!) All work and no RPG: A few months ago as I was sitting thinking about the lack of RPGs in my life and talking to my wife about why I wish RPGs were different and easier for a dad like me to get into. She seemed like she was listening, so I started listing all the things that made them impossible for me to play. Here’s a short list I came up with. They take 15 billion hours to complete I have a few minutes at a time I can grab to play them if I want to have time to code. At that rate it would take me 9 trillion years to beat just one RPG. There’s such long spans of times between when I can play them I forget what I was even doing so I have to spend most of the playtime I have just figuring that out and then my play time is over. Repeat. I’ll never finish one and since it takes so long to get to the fun part in an RPG, I’m never having fun. RPGs aren’t fun if you don’t have hours to play them at a time. As you can see based on my science and math, RPGs aren’t fun for me any more. From there my brain started toying around with ideas of RPGs that would work for me. They would have to be a short RPG, you know one you could beat in a single play session. A dad sized play session. I started thinking, wouldn’t it be awesome if there was a fifteen minute RPG? That got me laughing and I took that as a good sign that it sounded fun and so I thought about it a little more. I immediately discarded the idea of doing a real RPG. I’m sure a short RPG like that could be done but it wasn’t the vibe that I had in my head. No this was going to be something that just had the core essence of an RPG. In reality what I’d be making would be more of an arcade style game. One with high scores and lots of crazy action on the screen. And that’s when it hit me. It would be a speed run RPG. That’s the basics of the game I’m working on.   The Elevator Pitch: It’s a 2D top down RPG themed arcade game focused on speed. It sounds like an RPG, smells like an RPG but it’s merely emulating an RPG. The game is focused on fun and mayhem in RPG form with players leveling up in seconds instead of hours and rushing to finish quests as quickly as possible because they’ve only got fifteen minutes before EVIL overtakes the world. If the player takes longer than fifteen minutes, it’s game over man. One to four player co-operative play to really see just how fast players can level up and beat the game. Gamers will compete on leaderboards for bragging rights for fastest 1, 2, 3, and 4 player speed runs, lowest leveled characters to beat the game, highest leveled characters to beat the game and so on. Times will be tracked for everything from how long a player sat distributing stats, equipping items, talking to NPCs to running around the level. These stats will be shown at the end of each quest/level so the players can work on improving their speed run for that part of the game next time around. It’s the perfect RPG for those of us who only have fifteen minutes of game time! Where I’m at: I’m still at the prototyping stage attempting to but all the basic framework pieces in place that will at minimum give me one level to rush through. I’ve been working on this prototype for about a month now though so I’m going to have to step it up a bit or I’m not going to get finished in time (remember I’ve only got 85 days left!) Lots of the game code is in place (although pretty sloppy) but I still can’t play through that first quest/level just yet. That’s my goal to finish up by the end of next Sunday (3/25/2012). You can all hold me to that and cheer me on or heckle me throughout the week. Either way that should help me stay a bit more motivated and focused. In my head this feels like it’s going to be a fun game so I’m looking forward to seeing how it actually plays!

  Read the article

• In apache cxf, How do i know the soap request message is gzip compressed?

  - by aspirant75

  I'm using Apache CXF to send soap message. in specific case, i have to send a soap message gzip compressed. Using log4j, i printed detailed info. would you let me know how i can know the message is gzip compressed and transfered to server. thanks in advance. Below is my java code for gzip and log info. java code Client cxfClient = ClientProxy.getClient(port); /** Logging Interceptor */ cxfClient.getInInterceptors().add(new GZIPInInterceptor()); cxfClient.getOutInterceptors().add(new GZIPOutInterceptor()); log info 20120814 18:56:15,351 DEBUG Interceptors contributed by bus: [] 20120814 18:56:15,351 DEBUG Interceptors contributed by client: [org.apache.cxf.transport.http.gzip.GZIPOutInterceptor@1682a53] 20120814 18:56:15,351 DEBUG Interceptors contributed by endpoint: [org.apache.cxf.interceptor.MessageSenderInterceptor@1b2d7df, org.apache.cxf.jaxws.interceptors.SwAOutInterceptor@7a9224, org.apache.cxf.jaxws.interceptors.WrapperClassOutInterceptor@110b640, org.apache.cxf.jaxws.interceptors.HolderOutInterceptor@2d59a3] 20120814 18:56:15,351 DEBUG Interceptors contributed by binding: [org.apache.cxf.interceptor.AttachmentOutInterceptor@158015a, org.apache.cxf.interceptor.StaxOutInterceptor@c0c8b5, org.apache.cxf.binding.soap.interceptor.SoapHeaderOutFilterInterceptor@b914b3, org.apache.cxf.interceptor.BareOutInterceptor@fdfc58, org.apache.cxf.binding.soap.interceptor.SoapPreProtocolOutInterceptor@c22a3b, org.apache.cxf.binding.soap.interceptor.SoapOutInterceptor@1629e71] 20120814 18:56:15,351 DEBUG Interceptors contributed by databinding: [] 20120814 18:56:15,357 DEBUG Adding interceptor org.apache.cxf.transport.http.gzip.GZIPOutInterceptor@1682a53 to phase prepare-send 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.interceptor.MessageSenderInterceptor@1b2d7df to phase prepare-send 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.jaxws.interceptors.SwAOutInterceptor@7a9224 to phase pre-logical 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.jaxws.interceptors.WrapperClassOutInterceptor@110b640 to phase pre-logical 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.jaxws.interceptors.HolderOutInterceptor@2d59a3 to phase pre-logical 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.interceptor.AttachmentOutInterceptor@158015a to phase pre-stream 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.interceptor.StaxOutInterceptor@c0c8b5 to phase pre-stream 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.binding.soap.interceptor.SoapHeaderOutFilterInterceptor@b914b3 to phase pre-logical 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.interceptor.BareOutInterceptor@fdfc58 to phase marshal 20120814 18:56:15,358 DEBUG Adding interceptor org.apache.cxf.binding.soap.interceptor.SoapPreProtocolOutInterceptor@c22a3b to phase post-logical 20120814 18:56:15,359 DEBUG Adding interceptor org.apache.cxf.binding.soap.interceptor.SoapOutInterceptor@1629e71 to phase write 20120814 18:56:15,360 DEBUG Chain org.apache.cxf.phase.PhaseInterceptorChain@31688f was created. Current flow: pre-logical [HolderOutInterceptor, SwAOutInterceptor, WrapperClassOutInterceptor, SoapHeaderOutFilterInterceptor] post-logical [SoapPreProtocolOutInterceptor] prepare-send [MessageSenderInterceptor, GZIPOutInterceptor] pre-stream [AttachmentOutInterceptor, StaxOutInterceptor] write [SoapOutInterceptor] marshal [BareOutInterceptor] 20120814 18:56:15,361 DEBUG Invoking handleMessage on interceptor org.apache.cxf.jaxws.interceptors.HolderOutInterceptor@2d59a3 20120814 18:56:15,361 DEBUG op: [OperationInfo: {https://asp.cyberbooking.co.kr/TopasApiSvc/services}getAirAvail] 20120814 18:56:15,361 DEBUG op.hasOutput(): true 20120814 18:56:15,361 DEBUG op.getOutput().size(): 2 20120814 18:56:15,361 DEBUG Invoking handleMessage on interceptor org.apache.cxf.jaxws.interceptors.SwAOutInterceptor@7a9224 20120814 18:56:15,364 DEBUG Invoking handleMessage on interceptor org.apache.cxf.jaxws.interceptors.WrapperClassOutInterceptor@110b640 20120814 18:56:15,364 DEBUG Invoking handleMessage on interceptor org.apache.cxf.binding.soap.interceptor.SoapHeaderOutFilterInterceptor@b914b3 20120814 18:56:15,365 DEBUG Invoking handleMessage on interceptor org.apache.cxf.binding.soap.interceptor.SoapPreProtocolOutInterceptor@c22a3b 20120814 18:56:15,365 DEBUG Invoking handleMessage on interceptor org.apache.cxf.interceptor.MessageSenderInterceptor@1b2d7df 20120814 18:56:15,365 DEBUG Adding interceptor org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor@dc9065 to phase prepare-send-ending 20120814 18:56:15,366 DEBUG Chain org.apache.cxf.phase.PhaseInterceptorChain@31688f was modified. Current flow: pre-logical [HolderOutInterceptor, SwAOutInterceptor, WrapperClassOutInterceptor, SoapHeaderOutFilterInterceptor] post-logical [SoapPreProtocolOutInterceptor] prepare-send [MessageSenderInterceptor, GZIPOutInterceptor] pre-stream [AttachmentOutInterceptor, StaxOutInterceptor] write [SoapOutInterceptor] marshal [BareOutInterceptor] prepare-send-ending [MessageSenderEndingInterceptor] 20120814 18:56:15,366 DEBUG Invoking handleMessage on interceptor org.apache.cxf.transport.http.gzip.GZIPOutInterceptor@1682a53 20120814 18:56:15,366 DEBUG Requestor role, so gzip enabled 20120814 18:56:15,366 DEBUG gzip permitted: YES 20120814 18:56:15,367 DEBUG Invoking handleMessage on interceptor org.apache.cxf.interceptor.AttachmentOutInterceptor@158015a 20120814 18:56:15,367 DEBUG Invoking handleMessage on interceptor org.apache.cxf.interceptor.StaxOutInterceptor@c0c8b5 20120814 18:56:15,370 DEBUG Adding interceptor org.apache.cxf.interceptor.StaxOutInterceptor$StaxOutEndingInterceptor@1f488f1 to phase pre-stream-ending 20120814 18:56:15,370 DEBUG Chain org.apache.cxf.phase.PhaseInterceptorChain@31688f was modified. Current flow: pre-logical [HolderOutInterceptor, SwAOutInterceptor, WrapperClassOutInterceptor, SoapHeaderOutFilterInterceptor] post-logical [SoapPreProtocolOutInterceptor] prepare-send [MessageSenderInterceptor, GZIPOutInterceptor] pre-stream [AttachmentOutInterceptor, StaxOutInterceptor] write [SoapOutInterceptor] marshal [BareOutInterceptor] pre-stream-ending [StaxOutEndingInterceptor] prepare-send-ending [MessageSenderEndingInterceptor] 20120814 18:56:15,370 DEBUG Invoking handleMessage on interceptor org.apache.cxf.binding.soap.interceptor.SoapOutInterceptor@1629e71 20120814 18:56:15,383 DEBUG Adding interceptor org.apache.cxf.binding.soap.interceptor.SoapOutInterceptor$SoapOutEndingInterceptor@1ce663c to phase write-ending 20120814 18:56:15,384 DEBUG Chain org.apache.cxf.phase.PhaseInterceptorChain@31688f was modified. Current flow: pre-logical [HolderOutInterceptor, SwAOutInterceptor, WrapperClassOutInterceptor, SoapHeaderOutFilterInterceptor] post-logical [SoapPreProtocolOutInterceptor] prepare-send [MessageSenderInterceptor, GZIPOutInterceptor] pre-stream [AttachmentOutInterceptor, StaxOutInterceptor] write [SoapOutInterceptor] marshal [BareOutInterceptor] write-ending [SoapOutEndingInterceptor] pre-stream-ending [StaxOutEndingInterceptor] prepare-send-ending [MessageSenderEndingInterceptor] 20120814 18:56:15,384 DEBUG Invoking handleMessage on interceptor org.apache.cxf.interceptor.BareOutInterceptor@fdfc58 20120814 18:56:15,387 DEBUG Compressing message. 20120814 18:56:15,388 DEBUG Sending POST Message with Headers to http://test.co.kr:80/###/###/###Conduit :{https://test.co.kr/###/####}###.http-conduit Content-Type: text/xml; charset=UTF-8 20120814 18:56:15,388 DEBUG SOAPAction: "getAirAvail" 20120814 18:56:15,388 DEBUG Accept: */* 20120814 18:56:15,388 DEBUG Accept-Encoding: gzip;q=1.0, identity; q=0.5, *;q=0 20120814 18:56:15,388 DEBUG Content-Encoding: gzip 20120814 18:56:15,388 DEBUG No Trust Decider for Conduit '{https://test.co.kr/###/###}###.http-conduit'. An afirmative Trust Decision is assumed. 20120814 18:56:15,394 DEBUG Invoking handleMessage on interceptor org.apache.cxf.binding.soap.interceptor.SoapOutInterceptor$SoapOutEndingInterceptor@1ce663c 20120814 18:56:15,394 DEBUG Invoking handleMessage on interceptor org.apache.cxf.interceptor.StaxOutInterceptor$StaxOutEndingInterceptor@1f488f1 20120814 18:56:15,394 DEBUG Invoking handleMessage on interceptor org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor@dc9065 20120814 18:56:15,459 DEBUG Response Code: 200 Conduit: {https://test.co.kr/###/###}###.http-conduit 20120814 18:56:15,459 DEBUG Content length: 11034 20120814 18:56:15,459 DEBUG Header fields: null: [HTTP/1.1 200 OK] Content-Language: [ko-KR] Date: [Tue, 14 Aug 2012 09:56:15 GMT] Content-Length: [11034] P3P: [CP='CAO PSA CONi OTR OUR DEM ONL'] Expires: [Thu, 01 Dec 1994 16:00:00 GMT] Keep-Alive: [timeout=10, max=100] Set-Cookie: [WMONID=mL6rq_Irpa_; Expires=Wed, 14 Aug 2013 09:56:15 GMT; Path=/] Connection: [Keep-Alive] Content-Type: [text/xml; charset=utf-8] Server: [IBM_HTTP_Server] Cache-Control: [no-cache="set-cookie, set-cookie2"]

  Read the article

• The SPARC SuperCluster

  - by Karoly Vegh

  Oracle has been providing a lead in the Engineered Systems business for quite a while now, in accordance with the motto "Hardware and Software Engineered to Work Together." Indeed it is hard to find a better definition of these systems.  Allow me to summarize the idea. It is:  Build a compute platform optimized to run your technologies Develop application aware, intelligently caching storage components Take an impressively fast network technology interconnecting it with the compute nodes Tune the application to scale with the nodes to yet unseen performance Reduce the amount of data moving via compression Provide this all in a pre-integrated single product with a single-pane management interface All these ideas have been around in IT for quite some time now. The real Oracle advantage is adding the last one to put these all together. Oracle has built quite a portfolio of Engineered Systems, to run its technologies - and run those like they never ran before. In this post I'll focus on one of them that serves as a consolidation demigod, a multi-purpose engineered system.  As you probably have guessed, I am talking about the SPARC SuperCluster. It has many great features inherited from its predecessors, and it adds several new ones. Allow me to pick out and elaborate about some of the most interesting ones from a technological point of view.  I. It is the SPARC SuperCluster T4-4. That is, as compute nodes, it includes SPARC T4-4 servers that we learned to appreciate and respect for their features: The SPARC T4 CPUs: Each CPU has 8 cores, each core runs 8 threads. The SPARC T4-4 servers have 4 sockets. That is, a single compute node can in parallel, simultaneously  execute 256 threads. Now, a full-rack SPARC SuperCluster has 4 of these servers on board. Remember the keyword demigod.  While retaining the forerunner SPARC T3's exceptional throughput, the SPARC T4 CPUs raise the bar with single performance too - a humble 5x better one than their ancestors.  actually, the SPARC T4 CPU cores run in both single-threaded and multi-threaded mode, and switch between these two on-the-fly, fulfilling not only single-threaded OR multi-threaded applications' needs, but even mixed requirements (like in database workloads!). Data security, anyone? Every SPARC T4 CPU core has a built-in encryption engine, that is, encryption algorithms cast into silicon.  A PCI controller right on the chip for customers who need I/O performance.  Built-in, no-cost Virtualization:  Oracle VM for SPARC (the former LDoms or Logical Domains) is not a server-emulation virtualization technology but rather a serverpartitioning one, the hypervisor runs in the server firmware, and all the VMs' HW resources (I/O, CPU, memory) are accessed natively, without performance overhead.  This enables customers to run a number of Solaris 10 and Solaris 11 VMs separated, independent of each other within a physical server II. For Database performance, it includes Exadata Storage Cells - one of the main reasons why the Exadata Database Machine performs at diabolic speed. What makes them important? They provide DB backend storage for your Oracle Databases to run on the SPARC SuperCluster, that is what they are built and tuned for DB performance.  These storage cells are SQL-aware.  That is, if a SPARC T4 database compute node executes a query, it doesn't simply request tons of raw datablocks from the storage, filters the received data, and throws away most of it where the statement doesn't apply, but provides the SQL query to the storage node too. The storage cell software speaks SQL, that is, it is able to prefilter and through that transfer only the relevant data. With this, the traffic between database nodes and storage cells is reduced immensely. Less I/O is a good thing - as they say, all the CPUs of the world do one thing just as fast as any other - and that is waiting for I/O.  They don't only pre-filter, but also provide data preprocessing features - e.g. if a DB-node requests an aggregate of data, they can calculate it, and handover only the results, not the whole set. Again, less data to transfer.  They support the magical HCC, (Hybrid Columnar Compression). That is, data can be stored in a precompressed form on the storage. Less data to transfer.  Of course one can't simply rely on disks for performance, there is Flash Storage included there for caching.  III. The low latency, high-speed backbone network: InfiniBand, that interconnects all the members with: Real High Speed: 40 Gbit/s. Full Duplex, of course. Oh, and a really low latency.  RDMA. Remote Direct Memory Access. This technology allows the DB nodes to do exactly that. Remotely, directly placing SQL commands into the Memory of the storage cells. Dodging all the network-stack bottlenecks, avoiding overhead, placing requests directly into the process queue.  You can also run IP over InfiniBand if you please - that's the way the compute nodes can communicate with each other.  IV. Including a general-purpose storage too: the ZFSSA, which is a unified storage, providing NAS and SAN access too, with the following features:  NFS over RDMA over InfiniBand. Nothing is faster network-filesystem-wise.  All the ZFS features onboard, hybrid storage pools, compression, deduplication, snapshot, replication, NFS and CIFS shares Storageheads in a HA-Cluster configuration providing availability of the data  DTrace Live Analytics in a web-based Administration UI Being a general purpose application data storage for your non-database applications running on the SPARC SuperCluster over whichever protocol they prefer, easily replicating, snapshotting, cloning data for them.  There's a lot of great technology included in Oracle's SPARC SuperCluster, we have talked its interior through. As for external scalability: you can start with a half- of full- rack SPARC SuperCluster, and scale out to several racks - that is, stacking not separate full-rack SPARC SuperClusters, but extending always one large instance of the size of several full-racks. Yes, over InfiniBand network. Add racks as you grow.  What technologies shall run on it? SPARC SuperCluster is a general purpose scaleout consolidation/cloud environment. You can run Oracle Databases with RAC scaling, or Oracle Weblogic (end enjoy the SPARC T4's advantages to run Java). Remember, Oracle technologies have been integrated with the Oracle Engineered Systems - this is the Oracle on Oracle advantage. But you can run other software environments such as SAP if you please too. Run any application that runs on Oracle Solaris 10 or Solaris 11. Separate them in Virtual Machines, or even Oracle Solaris Zones, monitor and manage those from a central UI. Here the key takeaways once again: The SPARC SuperCluster: Is a pre-integrated Engineered System Contains SPARC T4-4 servers with built-in virtualization, cryptography, dynamic threading Contains the Exadata storage cells that intelligently offload the burden of the DB-nodes  Contains a highly available ZFS Storage Appliance, that provides SAN/NAS storage in a unified way Combines all these elements over a high-speed, low-latency backbone network implemented with InfiniBand Can grow from a single half-rack to several full-rack size Supports the consolidation of hundreds of applications To summarize: All these technologies are great by themselves, but the real value is like in every other Oracle Engineered System: Integration. All these technologies are tuned to perform together. Together they are way more than the sum of all - and a careful and actually very time consuming integration process is necessary to orchestrate all these for performance. The SPARC SuperCluster's goal is to enable infrastructure operations and offer a pre-integrated solution that can be architected and delivered in hours instead of months of evaluations and tests. The tedious and most importantly time and resource consuming part of the work - testing and evaluating - has been done.  Now go, provide services.   -- charlie  

  Read the article

• Premature-Optimization and Performance Anxiety

  - by James Michael Hare

  While writing my post analyzing the new .NET 4 ConcurrentDictionary class (here), I fell into one of the classic blunders that I myself always love to warn about.  After analyzing the differences of time between a Dictionary with locking versus the new ConcurrentDictionary class, I noted that the ConcurrentDictionary was faster with read-heavy multi-threaded operations.  Then, I made the classic blunder of thinking that because the original Dictionary with locking was faster for those write-heavy uses, it was the best choice for those types of tasks.  In short, I fell into the premature-optimization anti-pattern. Basically, the premature-optimization anti-pattern is when a developer is coding very early for a perceived (whether rightly-or-wrongly) performance gain and sacrificing good design and maintainability in the process.  At best, the performance gains are usually negligible and at worst, can either negatively impact performance, or can degrade maintainability so much that time to market suffers or the code becomes very fragile due to the complexity. Keep in mind the distinction above.  I'm not talking about valid performance decisions.  There are decisions one should make when designing and writing an application that are valid performance decisions.  Examples of this are knowing the best data structures for a given situation (Dictionary versus List, for example) and choosing performance algorithms (linear search vs. binary search).  But these in my mind are macro optimizations.  The error is not in deciding to use a better data structure or algorithm, the anti-pattern as stated above is when you attempt to over-optimize early on in such a way that it sacrifices maintainability. In my case, I was actually considering trading the safety and maintainability gains of the ConcurrentDictionary (no locking required) for a slight performance gain by using the Dictionary with locking.  This would have been a mistake as I would be trading maintainability (ConcurrentDictionary requires no locking which helps readability) and safety (ConcurrentDictionary is safe for iteration even while being modified and you don't risk the developer locking incorrectly) -- and I fell for it even when I knew to watch out for it.  I think in my case, and it may be true for others as well, a large part of it was due to the time I was trained as a developer.  I began college in in the 90s when C and C++ was king and hardware speed and memory were still relatively priceless commodities and not to be squandered.  In those days, using a long instead of a short could waste precious resources, and as such, we were taught to try to minimize space and favor performance.  This is why in many cases such early code-bases were very hard to maintain.  I don't know how many times I heard back then to avoid too many function calls because of the overhead -- and in fact just last year I heard a new hire in the company where I work declare that she didn't want to refactor a long method because of function call overhead.  Now back then, that may have been a valid concern, but with today's modern hardware even if you're calling a trivial method in an extremely tight loop (which chances are the JIT compiler would optimize anyway) the results of removing method calls to speed up performance are negligible for the great majority of applications.  Now, obviously, there are those coding applications where speed is absolutely king (for example drivers, computer games, operating systems) where such sacrifices may be made.  But I would strongly advice against such optimization because of it's cost.  Many folks that are performing an optimization think it's always a win-win.  That they're simply adding speed to the application, what could possibly be wrong with that?  What they don't realize is the cost of their choice.  For every piece of straight-forward code that you obfuscate with performance enhancements, you risk the introduction of bugs in the long term technical debt of the application.  It will become so fragile over time that maintenance will become a nightmare.  I've seen such applications in places I have worked.  There are times I've seen applications where the designer was so obsessed with performance that they even designed their own memory management system for their application to try to squeeze out every ounce of performance.  Unfortunately, the application stability often suffers as a result and it is very difficult for anyone other than the original designer to maintain. I've even seen this recently where I heard a C++ developer bemoaning that in VS2010 the iterators are about twice as slow as they used to be because Microsoft added range checking (probably as part of the 0x standard implementation).  To me this was almost a joke.  Twice as slow sounds bad, but it almost never as bad as you think -- especially if you're gaining safety.  The only time twice is really that much slower is when once was too slow to begin with.  Think about it.  2 minutes is slow as a response time because 1 minute is slow.  But if an iterator takes 1 microsecond to move one position and a new, safer iterator takes 2 microseconds, this is trivial!  The only way you'd ever really notice this would be in iterating a collection just for the sake of iterating (i.e. no other operations).  To my mind, the added safety makes the extra time worth it. Always favor safety and maintainability when you can.  I know it can be a hard habit to break, especially if you started out your career early or in a language such as C where they are very performance conscious.  But in reality, these type of micro-optimizations only end up hurting you in the long run. Remember the two laws of optimization.  I'm not sure where I first heard these, but they are so true: For beginners: Do not optimize. For experts: Do not optimize yet. This is so true.  If you're a beginner, resist the urge to optimize at all costs.  And if you are an expert, delay that decision.  As long as you have chosen the right data structures and algorithms for your task, your performance will probably be more than sufficient.  Chances are it will be network, database, or disk hits that will be your slow-down, not your code.  As they say, 98% of your code's bottleneck is in 2% of your code so premature-optimization may add maintenance and safety debt that won't have any measurable impact.  Instead, code for maintainability and safety, and then, and only then, when you find a true bottleneck, then you should go back and optimize further.

  Read the article

< Previous Page | 168 169 170 171 172 173 174 175 176 177 178 179  | Next Page >